officeserv 7x00

74007400Samsung Confidential & Proprietary InformationCopyright 2006, All Rights Reserved.

1/16

OfficeServOfficeServ 7x00 7x00Enterprise IP Solutions

Quick Install Guide- Data Server –

S/W Upgrade

Mar, 2006

OfficeServ Lab.

Samsung Electronics Co., Ltd.


2/16

Upgrade using Web Management


3/16

1. Run the Web Browser.2. Access the initial IP of GWIM/GSIM/GPLIM using HTTPS.

The IP initial value of each board is as follows: GWIM - 10.0.0.1/24(eth0) GSIM – 10.0.3.1/24(rd1) GPLIM – 10.0.4.1/24(vsd) - 10.0.1.1/24(eth1) - 10.0.2.1/24(eth2)

In case of upgrading GWIM SW from v1.12 to v1.25 you should use bootloader.Because GWIM v1.12 SW has some problem in upgrading using Web Management. Other versions of GWIM and GSIM/GPLIM will have no problem with Web Management.

Note


4/16

3. Login using the administrator ID and Password. (ID : admin / Password : root)


5/16

4. Select the [System -> Upgrade] menu.

For the types of upgrade, there are ‘TFTP method’ and ‘File Transmission method through HTTP’ as well as Local method that uploads the user’s PC.


6/16

5. The package version to upgrade should be entered like ‘v1.24’ in the [Package Version] field.


7/16

6. For TFTP / HTTP, enter the address of the TFTP/HTTP server and click the [OK] button. * S/W Package file name : gwim-pkg-v{version_number}.tgz

Web based upgrade – TFTP/HTTP

Enter the address of the TFTP/HTTP server


8/16

6. For Local method, the relevant package file should be existed in the user’s PC. Click the [OK] button after selecting the file.

(In the TFTP / HTTP method, the files of the relevant version are searched automatically and downloaded, but for Local method, the entered version name and file name to upload should be identical. If Package Version is 'v1.24', the file name is ‘gwim-pkg-v1.24.tgz'. )

Web based upgrade – Local


9/16

Upgrade using Serial I/O Interface


10/16

Environment (OS7200)

TFTP servere.g. Execute the PumpKIN program. S/W package exists in the TFTP server directory

Management PC

Serial I/O cable

TFTP root directory

IP : 165.213.89.200

Hub or Switch


11/16

Environment (OS7400)

TFTP servere.g. Execute the PumpKIN program. S/W package exists in the TFTP server directory

Management PC

Serial I/O cable

TFTP root directory

IP : 165.213.89.200

Hub or Switch

GPLIM

eth0 eth1

eth2GWIMV.35

HSSI


12/16

S/W Upgrade using TFTP (on the bootloader)

1. Connect the serial cable to the SIO port of Board* baudrate : 19200

2. Enter the ‘D’ key after resetting the Board. Then the system goes into Bootloader Mode.

3. Reset the previous setting environment

U-Boot 1.1.2 (Jun 22 2005 - 22:07:53) OfficeServ 7400 SAMSUNG (GWIM v0.11)

CPU: 750GX v1.2 @ 996 MHzBOARD: GWIM v0.11DRAM: 512 MBNow running in RAM - Memory Address is 0x0ffcd000FLASH: [32MB@fc000000] [512kB@ff800000] 32.5 MBIn: serialOut: serialErr: serialNet: mv_enet0, mv_enet1, mv_enet2

Hit 'd' or 'D' key to stop autoboot : 0

GWIM =>

GWIM => protect off bank 1 ; remove the flash protectionGWIM => erase 0xfc000000 0xfc03ffff (or erase bootcf) ; erase the current setting environments/ : doneErased 1 sectorsGWIM => reset GWIM : 0xfc000000 0xfc03ffff

GSIM : 0xe0000000 0xe00fffffGPLIM : 0x2c000000 0x2c01ffff


13/16

4. Set the environment for TFTP

* If you want to know the current setting environments, enter the “printenv” command.


GWIM => setenv ethaddr = ; erase the MAC address because MAC address isn’t overwrittenGWIM => setenv ethaddr 00:00:00:00:00:01 ; setting the MAC address which isn’t duplicatedGWIM => setenv ipaddr 165.213.89.100 ; 165.213.89.100 is temporary IP addressGWIM => setenv serverip 165.213.89.200 ; 165.213.89.200 is the TFTP Server IP addressGWIM => setenv netmask 255.255.255.0GWIM => setenv pkgversion 1.24 ; 1.24 is the package version to upgradeGWIM => saveenv ; save the current setting environments

GWIM => printenvbootldrstart=0xff800000bootcfstart=0xfc000000osstart=0xfc040000configdbstart=0xfd700000logdbstart=0xfda00000bootldrend=0xff87ffffbootcfend=0xfc03ffffosend=0xfc1ffffffirmwareend=0xfd6fffffconfigdbend=0xfd9ffffflogdbend=0xfdffffffbootldrfile=gwim-bootldr.img-vbootcffile=gwim-bootcf.img-vosfile=gwim-os.img-vfirmwarefile=gwim-firmware.img-vconfigdbfile=gwim-configdb.img-vlogdbfile=gwim-logdb.img-vdownloadaddr=0x00400000bootargs=console=ttyS0,19200bootcmd=setenv bootargs $(bootargs) $(rootpath); bootm $(osstart) $(firmwarestart);


14/16

bootdelay=5baudrate=19200loads_echo=0ipaddr=165.213.89.100serverip=165.213.89.200rootpath=root=/dev/ram rwethact=mv_enet0firmwarestart=0xfc180000pkgversion=0.24ethaddr=00:00:00:00:00:01stdin=serialstdout=serialstderr=serial

Environment size: 884/262140 bytesGWIM =>


5. Enter the “install all” command

install [os | firmware | configdb | logdb | all]

os – Linux Kernel firmware – Root File System configdb – Config DB File System logdb – Log DB File System all - All of them


15/16


(NOTE) When you upgrade S/W package on the bootloader, you connect a PC to the debug port in the board. While the debug port of GSIM and GPLIM isn’t a front port of the board but inner port of the board, GWIM just uses a front port of the board for debug.

GWIM => intall allEthernet status port 0: Link up, Full Duplex, Speed 1 GbpsUsing mv_enet0 deviceTFTP from server 192.168.0.227; our IP address is 192.168.0.249Filename 'gwim-os.img-v0.12'.Load address: 0x400000Loading: | : doneBytes transferred = 975782 (ee3a6 hex)| : doneErased 7 sectorsCopy to Flash... : 100 % : doneEthernet status port 0: Link up, Full Duplex, Speed 1 GbpsUsing mv_enet0 device......TFTP from server 192.168.0.227; our IP address is 192.168.0.249Filename 'gwim-logdb.img-v0.12'.Load address: 0x400000Loading: | : doneBytes transferred = 131072 (20000 hex)| : doneErased 24 sectorsCopy to Flash... : 100 % : doneGWIM => reset


16/16

Thank you !

officeserv 7x00

Documents