october 2013 halloween

8/14/2019 October 2013 Halloween

1/12

October 2013

Blackbird Main Kit and Add-on

Layouts By: Melanie Stanczyk

October 2013: Blackbird

Main kit Add-on

Stamp Set

*All paper, embellishments and stamp products are included in the featured monthly main and add-on kits. Additional

supplies such as white cardstock for optional photo matting, inks, mists, staples, punches, journaling pens, bakers twine

machine and hand stitching may be used to further embellish the layouts.

Scraptastic Design Concepts


2/12

October 2013



Layout 1:

Materials Used:

Paper:

Pebbles Spooky (word paper)

My Mind's Eye Chevron (glittered orange chevron paper)

Teresa Collins Webs (white with black web paper)

Grey and White cardstock

Embellishments:

Scraptastic Club Trick or Treat Die Cut

2 Queen & Co Orange Ombre Dots

Glitz Designs Raven Cardstock Stickers (October, 31 square, owl and its creepy time stickers)

Glitz Designs Raven Whatnots (jack o lantern)

Teresa Collins Enamel Dots

Instructions:

Cut 3 photo mats to 3.75 x 5.25to fit a 3.5 x 5photo leaving a mat.

Cut the Teresa Collins Web paper to 6.75 x 12.

Cut the Pebbles Spooky paper to 5.5 x 12.

Tape the back sides together to make a 12 x 12 layout. Fancy cut a 12 strip of the My Minds Eye

Chevron glittered paper to make a chevron border.


3/12

October 2013



To embellish the lower half:

Adhere a photo mat on the left lower edge leaving a borde

on the left and lower edges. Use a few pop dots under the Its

Creepy Time sticker.

Adhere the Glitz jack olantern next to the photomat. Mat and

adhere the white Trick or Treat diecut to the grey cardstock, trim

around it leaving a thin border. Adhere to the layout with a few

popdots.

To embellish the upper portion:

Use popdots on the 31 square sticker and place about 2.25from

the top and 1 from left edge. Adhere the October sticker on

top the square 31 sticker. Adhere the owl above the sticker. Place

a few enamel dots by the owl.

Place two horizontal photo mats tilting slightly askew.


4/12

October 2013



Layout 2:

Materials Used:

Paper:

My Mind's Eye Labels (black side of paper)

Carta Bella Spooky Stripes (cream with script paper)

Authentique Antidote (plaid side of paper)

Glitz Design Raven Chevron (strip of the black chevron)

My Mind's Eye Chevron (glittered orange chevron strip)

Embellishments:

Doodlebug Halloween Twine

Glitz Designs Raven Whatnots (owl, crow and 31)

Pebbles Chalkboard Stickers (Hallowed Greetings)

3 Square Pebbles Photo Overlays3 Spider Wood Veneers

Instructions:

Cut the Carta Bella Spooky paper to 11.75 x11.75. Center and adhere to the black side of the My Minds

Eye paper.


5/12

October 2013



Cut a 10.25 x 3.5 stripof the plaid Authentique Antidote paper

Notch the edge to make a banner type edge. Adhere leaving

about on left, right and lower edge. Layer a 10 x 1.25

black/grey strip of Glitz Raven Chevron paper. Layer an

orange strip of the orange chevron glitter paper as shown.

Place the Glitz 31 cutout on the right edge of the paper strips

Tie a piece twine into a bow through the precut hole. Adhere

the crown with popdots slightly overlapping the 31 diecut.

Place a couple veneer spiders. (To enhance the color of the

veneer spider you can add some ink or paint on some mist.

wiped some liquid pearls that came as an extra in my kit.)

Add three 3.75 x 3.75 photosunder the square Pebbles Photo

Overlays. Adhere them as shown. The left photo is adhered

3.375 from the top and from the left edge. The middle

photo is adhered 2 from the top and 3.75 from the left edge

The right photo is adhered 3 from the top and from the

right edge.

Use popdots under the Hallowed Greetings chalkboard sticke

and adhere above the right photo. Pace a strip of the glitter

chevron paper as shown and a veneer spider in the upper

right hand side.

Cut the yellow moon away from the owl. Adhere with popdots above the first photo on the left edge.


6/12

October 2013



Layout 3:

Materials Used:

Papers:

Glitz Design Raven Triangles (triangle side of paper)Pebbles Spooky (black/white chevron side with pumpkin tear strip)

2 Sheets black cardstock

White cardstock for photo mats

Embellishments:

Eck Ormolu Flair Badges

3 Spider Wood Veneers

Glitz Designs Raven Cardstock Stickers

Ormolu Labels and Pennants


Pebbles Chalkboard Stickers (No. 31)

Glitz Designs Raven Whatnots (spider web, tag and wishing you a spook Halloween banner)Glitz Designs Raven Cardstock Stickers


7/12

October 2013



Instructions:

Use the two black pieces of card stock as the background.

Cut about half of the triangles from the Glitz Design Raven

paper. Depending your design youll want a good pileof

them. Place them as desired on the cardstock.

Cut the bottom half off the Pebbles Spooky paper to 12 x 7

keeping the tear strip in place (the piece with the pumpkins

lining the bottom of the paper.)

Place it between the two pages. Leave about 7.5on the left

side and 4.5 on the right edge. That way you wont be cutting

down the middle of your picture. Cut two pieces of white

cardstock to 4.25 x 6.25and one to 2.5 x 6.25.

Ink the edges of the white cardstock and center on the chevron paper.

Embellish the middle piece of cardstock with Ormolu Labels & Pennants and

the Doodlebug Halloween Twine, cardstock stickers and the eckflair. Place

popdots under the spooky label to give it some dimension.

Add the trick or treat subtitle with the Glitz Designs Raven Cardstock Stickers

Or use it a journaling area.


8/12

October 2013



Place the Glitz spider web on the upper right hand side of the

layout. Place the Wishing you Spooky Halloween banne

slightly over the top, elevate with popdots. Place a few venee

spiders around/on the web.

Place the black/white chevron tag under the banner and

embellish with the No. 31 sticker and labels. The October word

image was stamped on using this month stamp set.

Place the tree sticker on the bottom right edge leaving about

2.25 from the edge.Place the owl sticker on a branch.


9/12

October 2013



Layout 4:

Materials Used:

Papers:

Authentique Frenzy Honeycomb

Teresa Collins Brocade (polka dot side)

2 sheets of orange cardstockWhite cardstock

Webster's Pages Chevron Overlay

Embellishments:

Pebbles Treat Bag

1 Pebbles Photo Overlays

Spider Web Ormolu Flair Badge

2 Spider Wood Veneers


Scary Stuff Die Cut

Glitz Designs Raven Whatnots

Pebbles Chalkboard StickersGlitz Designs Raven Cardstock Stickers

Instructions:

Use 2 orange pieces of cardstock as the background. Cut the chevron overlay in half and adhere a 6 x 12

section on the upper half of each piece of cardstock. Trim two .75 x 12 inch strips for the Teresa Collins

Brocade paper. Adhere across the middle each page.


10/12

October 2013



Left side of layout:

Trim around the honeycomb shapes on the Authentique Frenzy

Honeycomb paper. Use the left edge of the paper and

randomly cut as shown on the example. Adhere onto the

layout.

Heres a close-up picture of the honeycombs

Cut five 4.25 x 6.25 rectangles from the white cardstock for photo

mats. Place one horizontal and two vertical on the page 1 of thelayout. The upper one is place about 1 from the top and .25 from

the right side.

Place the Happy Halloween sticker to the left of the framed

photograph. Embellish with arrow stickers and bat stickers.

Add your photo to the white cardstock and place the Pebbles

overlay over the top of the picture.

Place the lower photomats 1/2 from the bottom edge and .25

from the right edge. Finishing embellishing the page with the bat

stickers attched with popdots.


11/12

October 2013



Right side of layout:

Trim around the honeycomb shapes on the Authentique Frenzy

Honeycomb paper. Use the right edge of the paper and

randomly cut as shown on the example. Adhere onto the

layout.

Use the two remaining pieces of white cardstock and place

.25 from the left edge and 1 from the top edge.

Adhere the scary stuff diecut under the second photomatAdd your photos.

Fold the top of the Pebbles treat bag over creating an

envelope. Adhere it closed. Once it is folded and secured it

should be 4 tall. Embellish it with the Halloween die cut (I cut

the Merry part off.) Add a few stickers, twine and a flair badge

Cut 3 journaling blocks from white cardstock about .75 x 3to

3.5 long. The lengths can vary. Press the veneer spiders into

black ink and adhere over the journaling blocks.


12/12

October 2013



Contents

1 Sheet of Authentique Antidote

1 Sheet of Authentique Frenzy Honeycomb

1 Sheet of Glitz Design Raven Chevron

1 Sheet of My Mind's Eye Labels

1 Sheet of Pebbles Spooky

1 Sheet of Teresa Collins Brocade

2 Sheets of Bazzill Chantilly

2 Sheets of Bazzill Pepper

2 Sheets of Bazzill Tangelo

1 Sheet of Carta Bella Spooky Stripes

1 Sheet of Glitz Design Raven Triangles

1 Sheet of My Mind's Eye Chevron

1 Sheet of Teresa Collins Webs

1 Sheet of Webster's Pages Chevron Overlay

1 Sheet of Bazzill Gray Prismatic

1 Sheet of Bazzill Marshmallow

1 Sheet of Glitz Designs Raven Alphas

1 Package of Glitz Designs Raven Whatnots

1 Package of Pebbles Chalkboard Stickers

1 Package of Teresa Collins Enamel Dots

1 Sheet of Authentique Thrilling Alphas

1 Sheet of Glitz Designs Raven Cardstock

Stickers

1 Package of Queen & Co Orange Ombre

Dots

2 Pebbles Treat Bags

4 Pebbles Photo Overlays

1 Sheet of Exclusive Ormolu Labels and

Pennants

3 Exclusive Ormolu Flair Badges

9 Exclusive Spider Wood Veneers (3 of each)

2 Yards of Doodlebug Halloween Twine

1 Scraptastic Club Trick or Treat Die Cut

1 Scraptastic Club Moon and Stars Die Cut

1 Scraptastic Club Scary Stuff Die Cut

october 2013 halloween

Documents