OCT 2014 Issue

ESSENTIAL Tips & Tricks by BIM/CAD Trainers

FEATURES

EFFORTLESS DRAFTINGthrough online BIM/CAD Resources

ONSITE OFFICIALwith Khairul ‘Ain B Kamarozaman

MY FIRST BIM

ASSIGNMENT @

SEMBCORP! by Teo Yu Hao

Page | 1

THE BULLETINHEALTHY LIVING

EMPLOYEES’ CORNER

EFFORTLESS DRAFTING THROUGH ONLINE BIM/CADRESOURCES

MY FIRST BIM ASSIGNMENT AT SEMBCORP ARCHITECTS & ENGINEERSBY TEO YU HAO

ONSITE OFFICAL WITH KHAIRUL ‘AIN B KAMAROZAMAN

CONTENTS

EDITOR’S NOTE 3

6 ESSENTIAL TIPS & TRICKS FOR ONSITE ASSIGNMENTSBY ACEPLP BIM & CAD TRAINERS

4

19

DISCOVER GROUND-BREAKINGDESIGNS AROUND THE WORLD

ENGINEER’S ADVICE

7

11

22

28

28

30

35

Page | 2

MAIN

ACE BUZZ

EDITOR’S NOTE

I’m writing this note 24 hours before publishing our Oct MAC issue. Look forward to it because even though I’m sleep deprived, I love working with my earnest and competent editorial team and secretly love the “uncertainty” feeling while awaiting the response of our readers.

We have been actively involved with site visits to meet some of our engineers who have been onsite for quite some time. Such illuminating practice allow us to hear your feedback and when I heard the news that some of you shared the same “uncertainty” feeling before embarking on your first assignment, it solidifies the notion of how we should run this issue because every assignment is different and therefore it’s unique.

Page | 3

I never quite understood how nerve wrecking it must be for some of you until I spoke with Khairul ‘Ain during one of our site visits. Despite having no civil structural background, he was first assigned to service our client at Parsons Brinkerhoff (page 4) on their MRT projects.

We have also invited Yu Hao to share his story. Unlike most of our new trainee, he was eager to get this hands full of BIM despite knowing that it’s not an easy assignment (page 19).

Hard skills and knowledge are a part of any passion or business. But it’s managing the expectation and pressure that truly allows one to do well. Having been through the same Traineeship Programme, AcePLPTrainers have provided some useful advice for your takeaway (page 28).

Last issue (July MAC), we have raised a couple of eyebrows by including articles that advocates maintaining a healthy lifestyle. We get that question a lot during our site visits as well. Here’s your answer to everything – We peg meaningful values into our work and we take chances.

Although I’m not a big fan of lifestyle preaching, I believe that adopting a learning attitude and being passionate about what you’re doing will inevitably make you an expert in your field of passion, simply because you seek continuously to master it.

Start igniting this fire inside of you and that’s how you can make your uncertainties, certain.

Lastly with November coming up our sleeves, have your RSVP to our Employee Appreciation Night?

Shareen Tam

Shareen TamHR Department, AcePLP

Employee Referral Programme

Onsite officialwith

When Khairul ‘Ain was first assigned to service a project at Parsons

Brinkerhoff, he knew it was going to be challenging. With his Aerospace

Aviation background, drafting Civil and Structural drawings for MRT

tunnels is not going to be a walk in the park.

Like any other Trainees in AcePLP, Khairul ‘Ain was uncertain of his career

prospect upon graduating from school. What he was certain of were the

various clients projects that could propel him in vastly different

engineering career directions through the AcePLP Traineeship Programme.

Even through he was rushing to meet deadline for his projects, MAC

managed to catch up with this chivalrous dude. Read on to find out what

Khairul ‘Ain has to share…

Page | 4

Hi Khairul ‘Ain, tell us more about yourself prior to joining AcePLP Traineeship Programme.

I graduated from Singapore Polytechnic with Diploma in Aerospace Avionics. Back then, I was uncertain of my career prospects and unsure if Aerospace industry was suitable for me. Since I did not know where exactly my interest lay, I wanted a job that would allow me to explore the different engineering industries. Like any other trainees, I chanced upon AcePLP job advertisement. I felt that this is a good opportunity as I will receive training and at the same time, gain experience from different client’s projects. I decided to apply for the job and this is how I kick-start my career in the AEC industry. Right now, I’m about a year into my Traineeship Programme and I’m currently taking a private safety course as well. With that being said, I’m still exploring and anticipating the opportunities awaiting in the future.

How about your onsite assignments?

So far I have only been assigned to one on-site assignment, which was at Parsons Brinckerhoff. Parsons was working on an MRT Project at the time and I was there to help them do up 2D civil and structural CAD drawings for submission. I had to prepare the CAD drawings in accordance with the CAD Standards as set by Land Transport Authority (LTA). The types of drawings that I did were plans for the MRT tunnels, MRT Tunnel elevation and sections of the MRT tunnels as well as soil profiling for Parsons’ geotechnical studies.

There were definitely many challenges and difficulties I encountered there, but I think it is all a natural part of learning. As this was my first assignment, I was very lost in the beginning and I made a lot of mistakes.

Sometimes I was also requested to make some last minute amendments to the drawings and was given a unreasonable deadlines to complete the drawings. I coped with this by explaining why the amendments cannot be completed within such a short period. Always know that delays are not entirely your fault because CAD software is not magic and it requires time to study how the amendments will affect the rest of the drawings.

I see. So were there any hiccups and challenges that you faced during your training thus far?

I started my in-house training with absolutely no experience with using CAD software. Initially, it was extremely daunting. Nevertheless, I have always been comfortable with using the computer since my polytechnic days. Therefore, I was quite comfortable with the in-house training and surprisingly, I found it quite fun.

Page | 5

Got an experience to share?Write in to media@aceplp.com.sg.Read page 33 on how you stand to win Starbucksvouchers!

What are the things that you had learn on the job? How do you better prepare for project discussions?

I have learnt a lot about how MRT structures are put together and how complicated it can get when it comes to diverting service lines and roads to make way for the construction of tunnels. I am also now very comfortable with using Bentley MicroStation because I've been using it since day one here. My skills and knowledge have increased very much and is a big improvement from me knowing nothing about civil and structural works and drafting software when I first joined.

As each client has their own practices, you had to learn their common practices as you go along. You also have to learn the submission process of the drawings that you will be producing and you will need to know what exactly it is that you are working on and how your work will affect other areas of the project. It definitely helps if you know what your work is being used for if you want to improve your drafting skills.

Are there any experiences that have changed/ inspired you and your career prospects?

The satisfaction when the engineer tells me that I have done a great job really inspires me to continue doing the best I can for the project.

Oh yes! We get that a lot. Most of our trainees also cited that the sense of satisfaction upon completion of a project gives them the extra boost. So is there any advice you wish to provide to freshies entering into the AEC industry?

If there is one advice I would give, it would be this: In this industry, nothing is ever not urgent. So, don't stress over a huge pile of work. Learn to prioritise and you will do fine.

Khairul ‘Ain aims to become a role model to inspire his juniors to enjoy this line of work as much as he does.

You have our back dude!

Page | 6

ESSENTIAL TIPS & TRICKS

Page | 7

6 ESSENTIAL TIPS & TRICKS

1. Tired of rotating and placing model reference to titleblock repeatedly? Use “saved view” inmodel and attach reference with the saved view to skip those drag. Tips by Jack Liew!

2. Use “Trim to Element” tool for a faster way of trimming and extending multiple lines to thesame boundary during cutback. Don’t we love short-cuts? Thanks Jack!

Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.

Read page 27 on how you stand to win Starbucks vouchers!Page | 8

6 ESSENTIAL TIPS & TRICKS

3. Sometimes it can be a hassle to select elements with multiple joints. You never know howmuch time you can save, until you try out this simple trick by Duraisamy Sridharan!

Click on “Tab” key and place your cursor onto the joint elements you wished to select. Wehave put together a simple illustration below.

Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.

Read page 27 on how you stand to win Starbucks vouchers!

4. Facing difficulties loading multiple families into your new project? Lim Yong Shen illustrateshow you can select all the families you need before loading them into Revit, simply byutilising the preview panel to view the family before loading.

Press Ctrl Key and click the families you wish to select. Click the first family at the top of thelist, press shift key and select the last family from the bottom of the list.

Page | 9

6 ESSENTIAL TIPS & TRICKS

Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.

Read page 27 on how you stand to win Starbucks vouchers!

5. Pham Hiep Luc shows us some of the moves he got for Planning.

Instead of using assign in relationship tab, linking of activities can be made faster byclicking and holding the end of activity in the bar chart, and simply drag to the head or endof successor activity.

6. To show activity links on updated programme baseline, move the baseline bars to thebottom of the bars form.

Page | 10

DISCOVER

ground-breaking

DESIGNS

Page | 11

Rendering of the Botswana Innovation Hub created using Autodesk Revit software.

Image courtesy of SHoP Architects.

Page | 12

Rendering of the Beijing National Aquatics Center created using Autodesk BIM Solutions.

Image courtesy of China Construction Design International.

Page | 13

Vancouver Convention Center in British Columbia Prototype created using

Autodesk Digital Prototyping Software.

Image courtesy of Aluminium Curtain Wall Systems Inc.

Page | 14

Rendering of Kitchen Interior Design created using Autodesk Revit.

Image courtesy of Muhammad Azhari, AcePLP.com Pte Ltd.

Page | 15

Rendering of Exterior Porch created using Autodesk Revit.

Image courtesy of Muhammad Azhari, AcePLP.com Pte Ltd.

Page | 16

Rendering of a Villa created using Autodesk Revit.

Image courtesy of Muhammad Azhari, AcePLP.com Pte Ltd.

Page | 17

Rendering of cliff-side houses created using Autodesk Revit.

Image courtesy of Lim Tian Hock, AcePLP.com Pte Ltd.

Page | 18

MY FIRST

BIM PROJECT@ SEMBCORP ARCHITECTS & ENGINEERS

TEO YU HAO

Page | 19

Before joining AcePLP, I was working as a DesignEngineer at Aero Technology for 2 years. My job wasgetting routine and I felt that I should advance andexplore other opportunities. A career switch was whatI needed. I came to know about AcePLP TraineeshipProgramme through ST Career Fair held at Marina BaySands. I left my resume at the booth and wasshortlisted for an interview. I officially joined theTraineeship Programme on 16 September 2014, inhope to receive skills training and getting hands-onexperience to enter the AEC industry.

Like the rest, I started my in-house training in a batch.We were taught on how to use Autodesk’s softwaresuch as AutoCAD, Revit Architecture and Revit MEP &Structure, and Bentley MicroStation right from thefundamental level. During our in-house training, wewere also required to attend night classes such as Tips& Tricks, CAD Orientation and CSD/SEM MicroStation.

6 weeks passed and I went on my first onsiteassignment at Hyundai Engineering & Construction.Although it was a short relief assignment for one of mysenior, I did some 2D CAD drafting and amendment for1 sequence drawing from the South Beach MixedDevelopment project using AutoCAD.

My first official assignment was at Sembcorp Architectsand Engineers. I was eager to have my first hands-on inBuilding Information Modelling (BIM) using Revit. Iconsidered it as a breakthrough from the usual 2D CADdrafting, which at times can be a little bit boring.

During my assignment at Sembcorp, stress is inevitable asthe team that I was assigned to work with only know thebasic operations of BIM. There was one lady who is slightlymore trained in BIM (at advance level) but unfortunatelyshe was on leave for a week. Thus, whenever I faced issueswith the Revit software, I have to search the internet andtroubleshoot independently. Self-learning is part andparcel of my onsite training and the internet is really alifesaver platform; where you can easily find an ever-readypool of self-enhancement resources and videos.

My main role for the Bedok Integrated CommunityCentre Project was to convert the 2D floor plans suppliedby the architects into 3D models in Revit. I thought itsounded like a simple and easy task. However, changeswere frequent and I would have to update or redo thewhole floor plans again, whichever I deemed would bebetter.

The architect’s drawings may not be accurate at times,which required one to analyse and use common sense totranslate them into a better model in Revit For example,the drawing may be missing some flooring for people tomove across. Thus, it makes sense to fill the gap in withflooring to make it more complete. When in doubt, Iwould always approach my clients to check if theapparent mistakes in their drawings were intentional. Infact, there were several times where I helped them tospot their mistakes with such constant checking!

Page | 20

As by default, Revit displays the real line weight, whenworking in high scales or zoom, the model can becomehard to read. You can use thin line features to tracelines, making it easier to read while working. Also, somefiles may have imported drawings/masses in them whichwill easily confuse you, so you can turn them off usingvisibility options.

Working on the Sembcorp project was a goodexperience for me as it exposed me to building elementsand certain codes of practice. I recommend thoseinterested in BIM or building modelling to give suchchallenging assignments a try!

Currently I’m servicing projects at ST Info-Comm SystemPte Ltd but it’s another chapter to share.

Cheers,Teo Yu Hao

Along the way, additional technical difficulties arosewhen I had to do massing for the first time. Usuallymassing is performed at the conceptual design stage,when the actual construction has not taken place yet.After massing, the model gives the effect of objects in aplan looking heavier. Being tasked with this for the firsttime was challenging, but thankfully, the internet prettymuch helped me solve my issues. I would not say thesolutions found were perfect but they were goodworkarounds for simple modelling. Advanced modellingwould most probably require more intensive hands-on orexpert advice.

However through this assignment, I have also learntsome tips and tricks.

If there are several elements to be manipulated, you canmake use of either Modal Group or Filter List. For Modalgroups, if an element in a group is modified, the samegroup existing in different levels in the building would bemodified too. For filter list, if an element in the list ismodified, this will not be reflected in different levels ofthe building. So see which one fits your needs!

To help make your file size smaller, you can link CAD filesinstead of importing them. Purging unused elements &families at the end of the project will help make the filesmaller too.

Curved roof to be modelled (need requires massing) Façade require customizing

Note: Model shown in Google Sketch up.

Shortcuts:MV : moveCO : copyTL : thin lines on/offVV: visibility options

Page | 21

Autodesk resources

Uh Uh, it’s not that kind of university that you’re thinking of. For those who are unfamiliar withAutodesk University (AU), the website offers a year-round learning and networking experiences tohelp its member develop professionally and advance in their career. You can sign up for a freemembership and gain access to technical learning, social networking, blogs, videos and audiopodcasts.

The website focuses on technical learning, with in-depth training classes covering more than 1,500topics with thousands of screencasts, class hand-outs, speaker previews and as well as technicalarticles.

Autodesk Education CommunityOther than that, you can also login toAutodesk’s Education Community usingthe same account for:

• Free software download• Learn and explore tips to work faster• Sharpen your skills and build a

portfolio by entering AutodeskCompetitions

So what are you waiting for? Click onthe links below and get busy!

Autodesk University: http://au.autodesk.com/Autodesk Education Community: http://www.autodesk.com/education/home

(First published in July MAC 2014 issue) Page | 22

bentley resources

What does STUDENTserver do?

STUDENTserver is your one stop location for accessing all of the resources you are entitled to whileparticipating in Bentley’s academic program. The virtual learning platform provides:

• Unlimited access to Live & On-demand training• Downloading and installing more than sixty of the latest version of Bentley software products

relevant to your scope of work• Review of the logged-in user’s Bentley Professional Training Transcript• Professional networking and product support via Bentley’s BE Community social network site

Request for login

To reap the advantages of gaining unlimited access to the STUDENTserver, write in totraining@aceplp.com.sg and request for your user ID and login details now! Start clocking learningunits and stand to win prizes at AcePLP Appreciation Night 2014.

Bentley STUDENTserver: http://apps.bentley.com/studentserver/home/index

(First published in July MAC 2014 issue) Page | 23

CAD onlineCADALYST

A great resource of user-submitted CADtips & tricks. You can download usefulfiles from this website as well. It is also agreat place to find video tutorials (whichare mostly by Lynn Allen who has apretty awesome blog too). Sign-up fortheir tips & tools newsletter to get thelatest tricks sent right to your inbox.

CAD NOTES

A blog chock-full of CAD tips &tutorials. Software-focus is onAutoCAD, Revit & Microstation, witharticles from beginner to intermediatelevel.

ELLEN FINKELSTEIN

This site features tips & tricks forAutoCAD, and a google custom search foreasy reference. The tips section is alsosegmented into useful categories, whichmakes it easy to navigate around.

http://www.cadalyst.com/

http://www.cad-notes.com/

http://www.ellenfinkelstein.com/AutoCAD_tips.html

(First published in July MAC 2014 issue) Page | 24

CAD onlineFIRST IN ARCHITECTURE

The website were initially developed tohelp students who are doing degrees inarchitecture of any type. This site featureswritten tips and guides to help youbecome more efficient and generally leadyou to free resources, information anddownloads to great achievements. Thesite has ever since gone beyond thelecture theatre and into the office,relevant for people of any skill level.

REVIT CITY

Apart from downloading CAD familycomponents into your project throughthis site, you could also gain access to ahost of materials ranging from newsarticles to CAD tutorials. Simply click onthe “resources” tab.

CAREFUL DRAFTER

The title of the website says it all.Careful drafter is a blog host by AcePLPvery own resident Engineer – MuhdSalihin Bin Sis, with the hope ofproviding his tips & tricks to enhanceyour speed of drafting.

http://www.firstinarchitecture.co.uk/

http://www.revitcity.com/resources.php

http://carefuldrafter.wordpress.com/

Page | 25

Ace Resource

CADPRO BLOGThe official AcePLP Employee Blog features our resident engineers’stories, industry news update, CAD/BIM tips & tricks and eventshappening in AcePLP. Visit our CADPRO Blog here: www.cadpro.sg

ACEPLP E-TRAININGUnfortunately, only AcePLP employees are able to access the new andimproved e-training facility. The intranet site provides useful informationsuch as Code of Practices, CAD standards, BIM, Training videos andProjects references. You will also be able to find useful links to the AECindustry related websites.

(First published in July MAC 2014 issue) Page | 26

Having gone through the same Traineeship Programme

themselves, hear the advices straight from our Trainers’ mouth

My advice to trainees preparing to go for onsite assignments :

Try to be involved with in-house projects while waiting for assignments as it is a good simulation and can help

to mentally prepare you for onsite assignment. At the same time, you will be able to refresh all your knowledge

on drafting skills all over again.

By Kee Kay Loke

To trainees whom are facing project deadlines:

Break down your tasks into smaller parts, and set them as milestones to achieve. It helps you to keep moving forward

instead of feeling demoralized!

By Lim Tian Hock

To Trainees whom are unable to take the first leap:

Learn to visualize the drawings by forming a mental image that is similar to visual perception.

Interpret the instructions given, study the drawings, symbols,

legends and dimension before executing.

By Hannah Leah

To Trainees whom are new to the environment:

Build a good rapport with client is the most effective way to get things done. You don’t have to

be rich to be smart. Always remain humble and sincere

when you approach situations. Also most importantly, be

helpful and adopt a learning attitude!

By Zulkifli Bin Mohd Ain

Disclaimer: All information stated above are obtained from feedback by our BIM/CAD Trainers Page | 27

Go beyond, achieve wellness

Breakfast provides you the energy to start your day right while a

fit and healthy body needs sufficient nutrients to keep going.

Start getting to know why you should add a little seed and nutty

flavour to your day.

These tiny superfood came from the desert plant Salvia Hispanica. “Chia”, meaning “strength”, is an edible seed grown in Mexico dating back to both Mayan and Aztec cultures. These cultures are known for using these seeds as energy boosters. Did we not mention it is packed with a flavourful punch?

A nut of any tree of the genus Juglans, this nutritious edible kernels is a good source of heart-healthy monosaturated and omega-3 fats. However, like other nuts, walnuts should be eaten in moderation since they are also calorie-densed.

Relatively low in calories, almonds have more calcium than any other nut, making them a great food for overall health. Plus, they are rich in fibre and vitamin E, an antioxidant that helps fight dangerous inflammation and possibly healthy conditions such as lung cancer and age-related cognitive decline. Because they are so versatile, you can buy them raw, toasted, silvered, or coated with a variety of fun flavours.

Soy milk contains agents that can contribute to a range of hormonal changes. Switch to oat milk instead. Oat milk is made with pre-soaked oat groats, which are hulled grains broken into fragments. The benefit to drinking oat milk is its nutritious content. Oat milk contains 10 minerals and 15 vitamins. Lactose free and calcium-rich, you can start counting while drinking. Page | 28

EASY AND EFFECTIVE EXERCISE

Apart from proper nutrition, you need exercise to maintain your health. Here are simple but effective moves you can try…

• Walking This is the easiest exercise and the basic step before you move onto intensive exercises. Start with slow steps. Once you are comfortable, start increasing your speed.

• Jogging This is one of the most popular cardiovascular exercises. In the beginning you may feel a little tired, but once it has become a routine, you’ll feel so fresh!

• Swimming This exercise makes you move your whole body. Plus, every stroke has a different focus. For example, the breaststroke can build a muscular chest. Also, the coldness of the water can help alleviate stress.

• Cycling This exercise is very effective to lose weight as it increases metabolism. Cycling also helps reduce the risk of heart disease.

Looking to start up an interest group? E.g. Soccer, basketball, badminton and etc. Get friends to join you to make your healthy activities more exciting. Let us know by writing in to hr@aceplp.com.sg.

Page |29

Page | 30

Page | 31

By

tagg

ing

or

par

tici

pat

ing

on

@A

ceP

LP, #

Ace

plp

, #A

ceP

LP_s

g, #

Ace

PLP

SNA

PS!

Or

any

top

ics

or

gro

up

s st

arte

d b

y A

ceP

LPo

n F

aceb

oo

k, T

wit

ter

and

/or

Inst

agra

m,

you

gra

nt

us

per

mis

sio

n t

o u

se o

r re

pro

du

ce y

ou

r co

ntr

ibu

tin

g p

ost

, tag

, im

age

and

han

dle

on

Fac

ebo

ok.

Tw

itte

r o

r In

stag

ram

in

rel

atio

n t

o a

ny

med

ia.

FANCY OR NOT, HERE’S WHAT WE’VE

BEEN UP TO LATELY…

Been onsite for quite some time? Write in to request for a place to earn yourself a professional certificate!

Farewell tea party for our intern…

Hari Raya non-stop feasting celebration @AcePLP

Sushi birthday celebration for Aug babies!

Packing! If you haven’t catch the wind, AcePLP has expanded our office space!

Khairul & Aashiq @ Parsons Brinckerhoff

Page | 32

Had a blast at your latest assignment?

Got some useful tips & tricks?

Share your on-site experience with the

MAD about CAD team! If your

contribution is featured in our

magazine or CADPRO, you will

receive a loaded Starbucks card!

Send in your contributions to media@aceplp.com.sg. Our team will be in touch shortly!

Receive a LOADED Starbucks Card

Other than the promise of free coffee, you get: -

• Your article professionally presented with

copy-editing by the MAC team

• To enhance your professionalism by featuring

article on your LinkedIN page

• A link-back from the article on CADPRO to

your LinkedIN page

Page | 33

Happy Birthday

So we heard there’s some birthday boys and girls in the house.

AUG

1 2 3

4 5 6 7 8 9 10

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30 31

SEP

1 2 3 4 5 6 7

8 9 10 11 12 13 14

15 16 17 18 19 20 21

22 23 24 25 26 27 28

29 30

OCT

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30 31

• 1 Lim Yaw Keong• 2 Muhammad Sufian• 4 Nurull ‘Ain Binte Mustafa• 5 Erlina Kurniawati• 6 Hau Rui Zhen • 9 Mohamed Taslim • 10 Aslam Bin Mohamed Yusoff• 11 Andaya John• 14 Muhammad Adib• 17 Low Ying Hui • 19 Tan Hui Fang • 21 Herbert Su • 22 Mohammad Aashiq • 24 Tan Teck Seng • 29 Kirby Lim

• 1 Benjamin Nah • 2 Abdul Halim • 4 Muhammad Halim • 9 Muhammad A’lif Bin Saban• 11 Ricky Tan • 11 Muhammad Zuhairi• 14 Muhammad Jubir• 14 Sharon Soo• 16 Jonathan Huang • 16 Ang Siew Hwee• 21 Long Sue Yong • 22 Naziely Fahmie• 25 Siti Naqiah• 27 Tommy Tian

• 2 Zhou De Liang • 3 Vanessa Tang• 8 Muhammad Suffian Bin Salleh• 10 Razali Bin Abdul Rahim • 10 Khairulanwar Bin Kamaruzaman• 13 Daryl Lim • 21 Zulkifli Bin Mohd Ain• 22 Muhammad Zikri• 23 Nadiah Binte Mhd Salleh• 30 Muhammad Yussuf• 31 Nicholas Chan

In celebration of this joyous occasion, we have prepared a little gift for you. Write in to hr@aceplp.com.sg to confirm your collection appointment.

Page | 34

The BulletinLATEST ADDITIONS TO THE FAMILY

We welcome fourteen new faces to the team!

Line Manager Ng Teck Chye, Bob

IT Executive Rustan Rezaba

DROP BY & SAY HI

BIM/CAD Trainees Abdul Salam Bin Salim Caroline Brigritte DassChong Meng Kiang Liu Zhi YangIsmadi Bin IsmailMuhammad Fadhil B MerlanMuhammad Haiqal B MasriMuhammad Jubir B Muhd MuneerMuhammad Nuralif B SutirnoMuhammad Zikri B Mohd YazidNur Muhammad B Mohd SuwatiTan Yong Jian

Page | 35

Website: http://www.aceplp.com.sg

E-mail: enquiry@aceplp.com.sg

CORPORATE HEADQUARTERS159 Sin Ming Road#05-03/04 (Lobby 1),Amtech Building Singapore 575625

Tel: +65 6455 9938Fax: +65 6455 2232

BRANCH OFFICE26 Boon Lay Way#01-78 Tradehub 21Singapore 609970

Tel: +65 6515 9938Fax: +65 6515 9918