nvh/refinement - sensor+test
TRANSCRIPT
DATS-solo
Do you need... ...a complete solution rather than a “box”? ...a lightweight, compact device that plugs into your laptop? ...software that simply does the job? ...a solution that won’t break the bank?The DATS-solo is a pocket-sized, ultra portable, high quality, 24-bit data acquisition system. It is compact, rugged and has 4 analog inputs and a dedicated tacho input. Industry standard SMA connectors are used for input with optional adapters for other connectors. The size, tough packaging and power from USB make it ideal for mobile use. Internally there is comprehensive signal conditioning for IEPE with anti-alias filters, all controlled by Prosig’s DATS software.The fully integrated DATS software provides options for acoustic & vibration testing, rotating machinery analysis, NVH tests, hammer impact analysis, resonance testing and modal analysis.DATS-solo - a complete solution!
Prosig Data Acquisition System
4-Channel, Pocket Sized, USB Powered, 24-bit Data Acquisition System
WWW.PROSIG.COM
THE EXPERTS IN NOISE & VIBRATION MEASUREMENT
Rotating Machinery Vibration Test Acoustic Studies Impact AnalysisNVH/RefinementResonance Testing Modal Analysis
V0.93 16.Feb.2017
THE EXPERTS IN NOISE & VIBRATION MEASUREMENT
Environment & GeneralShock and vibration Suitable for mobile use (10g rms)
Operating temperature 0°C to +60°C (32°F to +140°F)Humidity 90% RH, non-condensing
Power usage <2WSupply voltage from USB
Connectors 4 x SMA (Analog inputs)1 x SMA (Tacho)USB-C (Power & data)
Dimensions (H x W x D) 30mm x 167mm x 97mm 1.2” x 6.6” x 3.8”
Weight 320g (0.71 lbs)
WWW.PROSIG.COM
SpecificationDATS-solo
IEPE Analog InputsTacho Input Electrical ground
USB-C (Data & power) Power LED
ConnectorsSystemInputs 4 x Analog (IEPE)
1 x Tacho (Voltage)Maximum sampling rate 100k samples/sec per channel
Resolution 24 bitCommunications USB 2.0
Analog InputsSignal inputs IEPE
Anti-alias protection >150dBDynamic range 105dB at 10k samples/sec
Noise floor -120dBOverall accuracy ± 0.10% FSD
Non-linearity Less than 1LSBInput voltage range 9 selectable ranges
Input impedance 1MΩIEPE power 24V @ 4mA
Analog over voltage protection ± 24VCommon mode rejection ratio (CMRR) 140dB (relative to FSD)
Measurement Sensors The DATS-solo can measure the following:
AcousticsVibrationDisplacementForcePressureTorqueLoadShockPosition
Or any other suitable IEPE sensor
Tachometer InputSignal inputs Voltage
Tacho resolution 1μsTacho input range ± 28VInput impedance > 1MΩ
Contact ProsigProsig (UK)Email: [email protected]: +44 (0)1329 239925
Prosig (USA)Email: [email protected]: +1 248 443 2470
@prosig
facebook.com/prosig
linkedin.com/company/prosig
youtube.com/user/TheProsig