nuline 2010 catalog

The Leader in Spray Suppression Products

Fenders • Mounting Kits & BracketsHangers • Light Bars

2010www.nuline.ca

The leaders in spray suppressionare now offering a complete

of fiberglass fenders(see pages 1 & 13)

2010www.nuline.ca

Single Axle Fenders

Fiberglass Fenders• Grey gel coat• Made of lightweight, maintenance free, long-lasting fiberglass, NO RUST!• Protective, keeping your truck cleaner with less damage• Low weight compared to steel or aluminum• New hidden bracket design• Corrosion and weather resistance to salt and will not rust, resists water and UV rays so will not fade or discolour• Full fenders drop down and roll away farther on the tire than traditional fenders on the market today. This keeps road spray and debris from flying off your tires and hitting your truck or other vehicles. This protection greatly decreases insurance and repair cost

Part No. Width Descriptionnf18019px 19" blackpolyfullsupersinglefender

nf18026px 26" blackpolyfullfender

nf18030px 30" blackpolyfullsmoothfender

nf180px 24" black/colourpolyfullfender

Choosecolour2-silver3-white4-orange5-red6-yellow7-blue

Example: NF180PX-5 (red X guard)

Part No. Descriptionnf180ff-1 fiberglass180withflares

nf180ffL-1 fiberglass180withflaresandlightholesnf180ffB-1 fiberglass180withflaresandhiddenbrackets*

nf180ffBL-1 fiberglass180withflares,lightholesandhiddenbrackets*

Poly 180º Series Fenders• Long lasting polyethylene• 3" flange 63"

40"

63"

51"

76"

51"

76"

50"

1

*HiddenBrackets

2010www.nuline.ca2

Single Axle FendersNF Series Flanged 3 Rib Fenders• Durable 16 gauge stainless steel or aluminum• 2" flange

Part No. Width Descriptionnf155a 24" aluminumsingleaxlefender

nf155ss 24" stainlesssingleaxlefender

nf166a 24" aluminumsingleaxlefender


nf180a 24" aluminumsingleaxlefender


nf155ssLa 24" stainlessliftaxlefender

Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge

53"

43"66"

47"

80"

50"

55"

36"

24"2"

Part No. Width Descriptionnf10166ssnr 24" stainlesssingleaxlefender

nf10180ssnr 24" stainlesssingleaxlefender

1000 Series Flanged 16 Gauge No Rib Fenders• Durable16 gauge stainless steel• 1.5" flange 66"

47"

80"

51"

Part No. Width Descriptionnf166ssnr 24" stainlesssingleaxlefender

nf180ssnr 24" stainlesssingleaxlefender

Pro Series Flanged 14 Gauge No Rib Fenders• 14 gauge stainless steel• 2" flange 66"

47"

80"

51"

24"2"

24"1.5"

2010www.nuline.ca3

Single Axle Fenders

Part No. Width Descriptionnf180aCp 24" aluminumcheckerplate

Part No. Width Descriptionn180ss 24" stainlesssingleaxlefendern180g 24” galvanizedsingleaxlefendern180a 24” aluminumsingleaxlefender

n155ss 24” stainlesssingleaxlefendern155g 24” galvanizedsingleaxlefender


Aluminum Checker Plate Flanged Fenders• .100 gauge• 2" flange

N Series 4 Rib Fenders

80"

50"

80"

50"

55"

43"

24"

24"2"

Part No. Width Descriptionnf18019ss 19.5" smooth16gauge

Super Single 16 Gauge Fenders• 16 gauge stainless steel

80"

50"

19.5"

2010www.nuline.ca4

Single Axle Poly Fender Mounting Kit

Single Axle Fender Mounting Kit

Part No. Description

np180kit poly180ºmountkit(willmountapairofpolyfendersonly)

All kits mount one set of fenders

n2180ssmk4n200-ss74n521n2180sshb


n180Gmk4n301n180Ghb

New Item coming soon!

2010www.nuline.ca5


n180gmk-pm4n401n180gHB

Single Axle Fender Mounting Kits


n180ssmk4n30-C1n180ssHB

2010www.nuline.ca

Single Axle Fender Mounting KitsHeavy duty 14 gauge stainless steel All kits mount one set of fenders

n2180ssmkHD*4 n200-ss7HD4 n521 n2180ssHb

6


n180ssmk-pm4 n40-c1 n180ssHb

2010www.nuline.ca7

Half Tandem Fenders

NF Series Flanged 3 Rib Fenders• Durable 16 gauge stainless steel or aluminum• 2" flange

Part No. Width Descriptionnf66px 26" blackpolyhalffender

Part No. Width Descriptionnf122a 24" aluminumtandemfender

nf122ss 24" stainlesstandemfender

nf139a 24" aluminumtandemfender


nf150a 24" aluminumtritandemfender

nf150ss 24" stainlesstritandemfender

nf60a 24” aluminumtandemfender

nf60ss 24” stainlesstandemfender







Black Poly Half Fenders• Long lasting polyethylene• 3" flange

24"2"

98"27"

122"

117"27"

139"

128"27"

150"

31"35"

54"

45"35"

73"

85"35"

112"

25"35"

54"

31"35"

60"

2010www.nuline.ca8

Half Tandem Fenders

Part No. Width Descriptionnf66aCp 24" aluminumcheckerplate


24"2"

27"39"

58"

25"35"

54"

27"39"

58"

24"1.5"

Part No. Width Descriptionnf1060ssnr 24" stainlesstandemfender

nf1066ssnr 24" stainlesstandemfender

nf1080ssnr 24” stainlesstandemfender

1000 Series Flanged 16 Gauge No Rib Fenders• Durable 16 gauge stainless steel• 1.5" flange


Pro Series Flanged 14 Gauge No Rib Fenders• 14 gauge stainless steel• 2" flange

24"2"

31"35"

60"

45"35"

73"

2010www.nuline.ca9

Half Tandem Fenders

Part No. Width Descriptionn60ss 24” stainlesshalffendern60g 24” galvanizedhalffender

n66ss 24” stainlesshalffendern66g 24” galvanizedhalffendern66a 24” aluminumhalffender

n80ss 24” stainlesshalffendern80g 24” galvanizedhalffender

n125ss 24” stainlesshalffendern125g 24” galvanizedhalffendern125a 24” aluminumhalffender


N Series 4 Rib Fenders

Part No. Width Descriptionnf1060ssnrLf 24" stainlesslongfronttandemfender

nf1066ssnrLf 24" stainlesslongfronttandemfender

nf1086ssnrLf 24” stainlesslongfronttandemfender

1000 Series Long Front 16 Gauge No Rib Fenders• Durable 16 gauge stainless steel• 1.5" flange

24"1.5"

25"41"

56"

31"41"

62"

45"41"

74"

24"

45"35"

73"

85"35"

112"

25"35"

54"

31"35"

60"

2010www.nuline.ca10

Half Tandem Fender Mounting KitsAll kits mount one set of fenders

n8060ssmk(Crossovermount)1nC091-ss2n230*1n6080ssHB


n8060ssmk-sm2n30-C2n230*1n6080ssHB-sm


n8060ssmk-pm2n40-C2n230*1n6080ssHB-sm

SPECIAL NOTES:The standard N230 Centre Mounts can be replaced with the N230 model of your choice. See page 21 for a complete listing. (Warranty is void if centre bracket is not bolted to fender.)

2010www.nuline.ca11

Half Tandem Fender Mounting KitsAll kits mount one set of fenders

n260ssmk2n200-ss72n230*2n521n260ssHB


For heavy duty arm order: N260SSMKHD


n8060ssmk-pm22n728-ss2n522n2125-ss2n230*1n6080ssHB-2


n8060gmk-pm2n402n230*1n6080gHB-sm

2010www.nuline.ca12


n8060gMK1 nc0912 n230*1 n6080gHB


Half Tandem Fender Mounting Kits

Made To Order (14 Day Lead Time)Single Axle Fenders

Half Tandem Fenders

N-Series NF Series Specialty nF166g nF180AnR nF155SSLA

N-Series NF Series Specialtyn60A nF66SSLF nF66AnR nF112SS nF80A nF116A nF80g

Full Tandem FendersN-Series NF Series Specialtyn126SS nF112SS nF12054AnR nF116A nF12054AcP nF126SS

2010www.nuline.ca13

Full Tandem Fenders

Fiberglass 180º Series/Double Hump Fenders• Grey gel coat• Made of lightweight, maintenance free, long-lasting fiberglass, NO RUST!• Protective, keeping your truck cleaner with less damage• Low weight compared to steel or aluminum• New hidden bracket design• Corrosion and weather resistance to salt and will not rust, resists water and UV rays so will not fade or discolour• Full fenders drop down and roll away farther on the tire than traditional fenders on the market today. This keeps road spray and debris from flying off your tires and hitting your truck or other vehicles. This protection greatly decreases insurance and repair cost

*HiddenBrackets


nf13254ff-1 fiberglasstandem54"spreadwithflares

nf13254ffL-1 fiberglasstandem54”spreadwithflaresandlightholes

nf13254ffB-1 fiberglasstandem54”spreadwithflares,andhiddenbrackets*

nf13254ffBL-1 fiberglasstandem54”spreadwithflares,lightholesandhiddenbrackets*

nf180fD-1 fiberglass180withflares

nf180fDL-1 fiberglass180withflaresandlightholes

nf180fDB-1 fiberglass180withflares,andhiddenbrackets*

nf180fDBL-1 fiberglass180withflares,lightholesandhiddenbrackets*

2010www.nuline.ca

Full Tandem Fenders

NF Series Flanged 3 Rib Fenders• Durable 16 gauge stainless steel or aluminum• 2" flange

Part No. Width Descriptionnf13254px 26" blackpolyfulltandemfender

Part No. Width Descriptionnf99a 24" aluminumtandemfender









Black Poly Full Tandem Fenders• Long lasting polyethylene• 3" flange

24"2"

55"39" 39"

108"

54"27" 27"

99"

66"27" 27"

112"

60"

54"

35"

35"

25"

31"

107"

101"

Part No. Width Descriptionnf12054acp 24" aluminumcheckerplatetandem


24"2"

54"31"

101"

35"

14

2010www.nuline.ca15

Full Tandem Fenders

60"36" 36"

109"

54"39" 39"

103"

60"

54"

35"

35"

25"

31"

107"

101"

Part No. Width Descriptionn120ss 24” stainlesstandemfendern120g 24” galvanizedtandemfendern120a 24” aluminumtandemfender

n12054ss 24” stainlesstandemfendern12054g 24” galvanizedtandemfendern12054a 24” aluminumtandemfender


N Series 4 Rib Fenders 24"

35"

35"

60"25"

54"31"

101"

107"

24"1.5"


nf1012054ssnr 24" stainlesstandemfender

1000 Series Flanged 16 Gauge No Rib Fenders• Durable 16 gauge stainless steel• 1.5" flange


nf13254ssnr 24” stainlesstandemfender

Pro Series Flanged 14 Gauge No Rib Fenders• 14 gauge stainless steel• 2" flange

24"2"

2010www.nuline.ca16

Full Tandem Fender Mounting KitsAll kits mount one set of fenders

n120ssmk(Crossovermount)1nC091-ss2n30-C2n230*1n120ssHB


n120ssmk-sm4n30-C2n230*1n120ssHB-sm


n120ssmk-pm4n40-C2n230*1n120ssHB-sm


2010www.nuline.ca

Full Tandem Fender Mounting KitsAll kits mount one set of fenders

n2120ssmk4n200-ss74n522n230*1n2120ssHB


n120-gmk1nC0912n302n230*1n120gHB


n120ssmk-pm24n728-ss4n522n230*1n120ssHB-2


For heavy duty arm order: N2120SSMKHD

17

2010www.nuline.ca

Quarter Fenders


n224-ss 24"

Includes everything as shown


n227-ss 27"



n231-ss 31"



nf234ssnr 34"


Stainless Steel Fenders



Stainless Steel Fenders 14 Gauge

18

Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately




2010www.nuline.ca

Quarter Fenders


n224-ssB 24"



n1585 24"



n1900-kitpairassemblyblack

All kits include 21" poly top flap, top flap hardware and fender tube clamp


n123-r rubberpair



Braceless Stainless Steel Fenders (OEM Factory Replacement)

Polyline™ Quarter Fender

Rubber Quarter Fender

19





2010www.nuline.ca

Fender Mounting AccessoriesPart No. Description

nC091(noholes) 94"pipeZincnC091-ss 94"pipestainlesssteel

n30(noholes) 30"sidemountZincn30-C(noholes) 30"sidemountChrome

n40(noholes) 30"postmountZincn40-C 30"postmountChrome (boththreaded3/4-16)

n200-ss7 stainlesssteelsidemountArmn200-ss7hD 12Ga.heavyDutysssidemountArmn200-ss7p stainlesssidemountArmForpeterbilt

n728-ss 29"sidemountpipestainlesssteel

n52 Threaded3/4-16postmount

n2125-ss stainlesssteelClamp

n127-ss QuarterFenderpipe

n32 4"offset32"post 17/8"Diameter

n42 32"straightpipe 17/8"Diameter

18-02068lhss/Rhss sidemountstainless(fitspeterbilt)

20


2010www.nuline.ca

Centre Mounting BracketsPart No. Description Height Plate Centres

N230 Regular 123/4" 4x6" 41/4"

N230-P-LH Peterbilt 10" 4x8" 53/4"

N230-P RH Peterbilt 10" 4x8" 53/4"

N32UB Universal Centre Bracket

N230-PM LH Universal 81/2"-115/8" No Plate Single Hole

N230-PM RH Universal 81/2"-115/8" No Plate Single Hole

N230-FL LH Freightliner 121/2" No Plate Slots in Bar

N230-FL RH Freightliner 121/2" No Plate Slots in Bar

N235 LH Outboard Left Hand 71/2" No Plate Slots in Bar

N235 RH Outboard Right Hand 71/2" No Plate Slots in Bar

NKIT40P Black Poly Bracket Kit

(4 Units Per Kit)

Centre Mounting Brackets

21


2010www.nuline.ca

Flexible Mud Flap HangersPart No. Description

n23 CoiledspringHangerset

n33 CoiledspringHangerset

n25 springHangersetn25-BarreL Bulkpacked40pc.Barrel*n23-2BuLk mountkit(seebulkpage)

n35 angledspringHangerset

Flexible Mud Flap Reflector Strips


nrs3000 aluminumreflectorstrip(pairs) (fitsnf27,nf30,nf31,nf33,n23,n25,nL306)

nrs3700 aluminumreflectorstrip(pairs) (fitsnf37,nf3345,n33,n35)

Flexible Mud Flap Hangers

SPECIAL NOTES: All sets come complete with 2 arms, mud flap mounting clips and all mounting hardware*N25 Barrel contains arms only, no N23-2 brackets included

22

2010www.nuline.ca

Spring Loaded Mud Flap HangersPart No. Description

Set Single

nf30p nf30p-1 painted

nf30C nf30C-1 Chrome

nf30ss nf30ss-1 stainlesssteel

nf31ss stainlesssteel

nf33ss nf33ss-1 stainlesssteel

NF3345 Angled Mud Flap Hanger Series

nf3345p painted

nf3345C Chrome


NF27 Mud Flap Hanger Series

nf27p painted

nf27C Chrome


NF37 Angled Mud Flap Hanger Series

nf37p painted

nf37C Chrome


NF30 Mud Flap Hanger Series

*Mounting hardware included with all hangers

30", 31", 33"

21/2"

281/2"

21/2"

30"

11/8"

11/8"

271/2"

23

2010www.nuline.ca

Lights and Deck PlatesPart No. Description

nL306ss-nL stainlesssteellightbarset withnolights

n3412ssnL stainlesssteelcentrelightpanel withnolights

Galvanized Deck Plates

Nominal Channel Standard Pattern Part No. Thickness Depth Width Length Weightround n2433gr .086 11/2" 24" 33" 28LBs. n3633gr .086 11/2" 36" 33" 38LBs.

Diamond n1833gD .075 11/2" 183/4" 33" 19LBs. n2433gD .075 11/2" 24" 33" 28LBs. n3633gD .075 11/2" 36" 33" 38LBs.

Aluminum Deck Plates

Nominal Channel Standard Pattern Part No. Thickness Depth Width Length Weightround n1833ar .125 2" 18" 33" 9LBs. n2433ar .125 2" 24" 33" 12LBs. n3633ar .125 2" 36" 33" 18LBs.

Diamond n1233aD .080 2" 113/4" 33" 4.8LBs. n2433aD .080 2" 24" 33" 10LBs. n3633aD .080 2" 36" 33" 14.4LBs.

Deck Plate Lengths12' Lengths Available (special order call customer service)

Aluminum Stepsn1223a aluminumstep

Spring Loaded Mud Flap Light Bar301/2"

33/4"

331/2"

113/4"

23"

121/2"

24

2010www.nuline.ca

Tool Boxes and Anti-Sail BracketsPart No. Description

ntB450 18"Wx15"Hx16"Dblacktoolb

ntB800 32”Wx20”Hx19”Dblacktoolbox

Anti-Sail Brackets

n2620-p paintedanti-sailBracket.fitsstandard

24"widemudflapsupto1/2"thick

n2620-C Chromeplatedanti-sailBracket.

fitsstandard24"widemudflapsupto1/2"thick

n2620-ss 304polishedstainlesssteelanti-sailBracket

fitsstandard24"widemudflapsupto1/2"thick

Poly Tool Boxes

Logo Service Available(minimum order quantity 10 boxes)

25

2010www.nuline.ca

Bulk ItemsPart No. Description Quantity

n1522ruBuLk universalrubberstrip 20

n23-2BuLk mountkitforn25 40

n123-5BuLk mudflaptop 20

n123-8BuLk mufflerClamp 50

n755BuLk Quarterfenderplug 50

n755ssBuLk Quarterfenderplug 50

nf30-3BuLk 141/8spring 20

nf27-3BuLk 105/8spring 20

n123ss-4BuLk QuarterfendertubeBrace 24

n123ss-3BuLk stainlesssteelfendersaddle 20

n38JBuLk “J”HookforDeckplate 40

Spring Loaded Mud Flap Light Bar

26

2010www.nuline.ca

Important! Read Instructions Prior to Installation

Installation Instructions for NU-LINE Fenders

Consult pages 7-12 of this catalogue for the dimensions of the mounting hardware available.The rear bracket (or centre bracket on a full fender) dimensions are critical in determining which bracket will fit on a particular truck. Determine the optimum location for the front and rear mounting brackets and in the case of a full fender, the centre brackets.

Install the brackets as per the schematic shown in the catalogue. Affix all Brackets and posts or side mounts to the frame using grade 8 bolts to firmly secure the brackets.

In the case of half and full fenders use the rubber insulator strips between the surface of the rear or centre bracket and the fender. These must be used as they absorb vibration which can lead to cracking of fenders. The rubber strips are manufactured to mate with the ribbed and smooth fender models. Round rubber grommets should not be used. The rear bracket must have a flat surface of 21" by 2" to properly secure the fender, and ensure maximum effectiveness and longevity of the fender. Some rear or centre bracket models such as the N230-PMLH and N230PMRH require a left and right.

All models of fenders must be positioned so that they are aligned properly. This means that all surfaces must make contact with the brackets without the fender requiring any twisting or bending. Should the fender require twisting to attach it to the brackets you risk premature unwarranted failure or cracking.

Drill the holes in the fenders as needed. Three bolts must be used when the fenders are attached to the rear brackets or centre brackets. These bolts are supplied in the appropriate mounting kits. When using the mounting kits containing the N200-SS7 mounting arms there is an installation template included for this purpose. This template is included in the N2180SSMK, N2120SSMK, and N260SSMK mounting kits.

Use only stainless steel hardware when installing NU-LINE stainless steel Tandem Fenders and galvanized when installing aluminum and galvanized fenders. The hardware supplied in the mounting kits is specific for the type of material used in the fenders. Failure to use only the specified hardware could result in premature staining and/or corrosion of fenders.

Secure the fenders firmly on the mounting arrangement using the hardware provided in the mounting kits.

In order to keep stainless steel fenders clean with a good appearance, clean only with mild soap and water. Do not use harsh or gritty cleaners or acids as they could tarnish the surface of fenders.

Rubber Insulator Strips Must Be Used.

27

Limited Warranty

All products manufactured and sold by NU-LINE Products Inc. are guaranteed to be free of defects in workmanship and materials for a period of one (1) year from date of purchase. All NU-LINE products must be installed using only NU-LINE supplied mounting kits and brackets. All tandem and half fenders must use a properly secured centre bracket to avoid cracking. Any use of mounting hardware and brackets of another make to mount NU-LINE products, or any modification of a NU-LINE product, will render the NU-LINE guarantee void. NU-LINE assumes no responsibility for the cost of installation or removal.

Exceptions to this limited warranty are as follows: cleaning with anything other than soap and water, damage and dents from road hazards are not covered, misuse or accidental impact damage is not covered, damage caused by corrosive materials is not covered.

Any materials to be considered for warranty must be returned to NU-LINE Product in Hamilton, freight prepaid, for inspection, with an approved NU-LINE Returned Goods Authorization. This warranty is good only for the original end-user of NU-LINE products.

General Information

Stainless Steel Fender Care and MaintenanceNU-LINE strongly recommends washing your fenders with water only. If detergents are necessary do not use anything stronger than a mild soap and water. When wiping and buffing your fenders we recommend using a soft, clean cloth making sure to wipe in the direction of the grain, do not buff in a circular fashion as this could cause damage to the surface.

TermsAll shipments are made COD unless credit is pre-arranged and authorized by NU-LINE Products Inc.

Minimum Orders$250.00 is the minimum order. Orders under $250.00 are subject to a $50.00 service charge.

ShippingAll goods are to be shipped FOB from NU-LINE locations in Hamilton, ON, Montreal, PQ, and Edmonton, AB. Every effort is made to ship customer orders in a timely manner, NU-LINE Products and its affiliates cannot guarantee same day delivery of the orders it receives. Shipments from Edmonton are subject to a 6% warehouse fee.

ShortagesShortages or errors made in filling an order must be reported within 10 days upon receipt of any shipments.

Damaged GoodsIt is the customer’s responsibility to inspect each shipment for damage. If the product is damaged in transit, the customer must file a freight claim with the carrier.

Returned GoodsAll returned goods must be authorized in advance by NU-LINE Products Inc. Items returned for credit will be subject to a restocking charge of 15%, and must be returned prepaid. No returns will be accepted without:

1. A Returned Goods Authorization (RGA) number issued by NU-LINE, and 2. A copy of the original invoice. 3. RGA good for 30 days only.

No credit will be issued for goods that NU-LINE deems damaged, unsuitable for sale, or discontinued.

Each customer is eligible to return 10% of last years sales.

28

Product Display StandsPart No. Weight Height Width DepthnDSE English 125 lbs. 60" 60" 30"nDSE French 125 lbs. 60” 60” 30”

WAREHOUSE LOCATIONS

Manufacturing Plantand Main Warehouse

NU-LINE PRODUCTS INC.891 ARVIN AVENUE,STONEY CREEK, ON L8E 5N9TEL. (905) 643-5375FAX (905) 643-5380WWW.NULINE.CA

Distribution Centre (East)

OUTIL PAC INC.5895 AVENUE ANDOVER,MONT-ROYAL, PQ H4T 1H8TEL. (514) 733-3555FRENCH TECHNICAL SERVICE(514) 910-2917

Main Warehouse Toll Free #1-866-837-2082© Copyright 2010 NU-LINE Products Inc. All Rights Reserved. Created by www.1stclassmarketing.com

nuline 2010 catalog

Documents

gauge fenders

series fenders

traditional fenders

gauge stainless steel805019

width descriptionnf18019ss

width descriptionnf18019px

width descriptionn180ss

width descriptionnf10166ssnr