nt technology tool breakage detection tool length
TRANSCRIPT
![Page 1: NT Technology Tool Breakage Detection Tool Length](https://reader033.vdocuments.mx/reader033/viewer/2022050313/626f9b60db18275a9a700ed8/html5/thumbnails/1.jpg)
Tool Measurement
NT Technology
Tool Breakage Detection
Tool Length Measurement
Tool Radius Measurement
Single Cutting Edge Monitoring
Axes Compensation
LaserControl Micro Single NT
LaserControl Micro Single NT
![Page 2: NT Technology Tool Breakage Detection Tool Length](https://reader033.vdocuments.mx/reader033/viewer/2022050313/626f9b60db18275a9a700ed8/html5/thumbnails/2.jpg)
61 30
23
22,5
98
Technical data
Laser safety classification Class 2 acc. to IEC60825‑1, 21 CFR 1040.10
Laser type Visible red light laser | 630 ... 700 nm | <1 mW
Protection class IP68
Power supply 24 V DC/160 mA
Inputs/Outputs 24 V DC | 0 ... 5 V DC analogue output *
Repeatability Δ transmitter/receiver: <750 mm: 2.9 μm 2σ **
Δ transmitter/receiver: <1500 mm: 5.6 μm 2σ **
Minimum tool diameter ** Δ transmitter/receiver: <750 mm: 210 μm | 137 μm***
Δ transmitter/receiver: <1500 mm: 405 μm | 268 μm***
Test speed (spindle) up to 200.000 rpm
*Option **Depending on installation situation, stability of fixation, distance and measuring mode*** With reduced amplification
Blum worldwideService & Support More than 40 subsidiariesand service offices.
www.blum-novotest.com
Blum-Novotest GmbH | Kaufstrasse 14 | 88287 Gruenkraut | Germany | +49 751 6008-0 | [email protected] Production Metrology Made in Germany
© B
lum
‑Nov
otes
t Gm
bH |
Ver
sion
08|
18,
Subj
ect t
o te
chni
cal c
hang
e w
ithou
t any
not
ice
LaserControl Micro Single NT | Non-contact tool setting system for machine tools
Extremely precise single system for tool setting
and monitoring under harshest conditions
• High absolute accuracy due to focused laser beam
• Measurement at nominal spindle speed
• 100 % process reliability due to patented NT‑Electronics
• BLUM pneumatic unit and shutter system provide superior protection
• Programmable by integrated microprocessor
Your benefit:
• Easy beam alignment due to LED band
• Increased productivity and production quality
• No subsequent damages due to tool breakage
• Reduced set‑up time and unmanned operation
• Reduced scrap rate
Fast single cutting edge monitoring
Complete system with accessories for easy mounting in the machining area
100 % reliable due to BLUM protection system
Indispensable – the BLUM pneumatic unit
Blum-Novotest Ltd.Unit 15 Granary Wharf Business ParkWetmore Road, Burton upon TrentStaffordshire , DE14 1DUUnited KingdomPhone: +44 1283 569691Fax: +44 1283 [email protected]
Blum-Novotest, Inc.4144 Olympic BoulevardErlanger, KY 41018USA
Phone: +1 (859) 344 6789Fax: +1 (859) 344 [email protected]