Page 1 NSCP-W62 Navigation & Audio book CRA4803-A Introduction Basic operation Basic navigation operation Search Root Registration and editing operation Use of various types of information Setting of navigation Audio Basics It wants to receive a broadcast Use music disk Use the SD card Use the Bluetooth Audio Use the AUX Setting Audio Use the camera function Other operations Appendix

Page 2

Two CRA4803-A Precaution (Please be sure to observe in order to Safety) In order to prevent damage to you or harm or property to other people, and explain that you get sure to observe It is doing. Ignore the display contents , the degree of danger and damage to exert upon the wrong use pieces divided in the next display It is, are described. Caveat It is a "content a person is assumed could result in death or serious injury." Note The occurrence of only the contents and property damage slightly injured possibility is assumed "human assumption

The contents "to be. the type of failure to observe the precautions are classified in the following picture display, are described. Note (including a warning) The contents that must be. The contents of the Force where I am be sure. The contents of the prohibited (doing it should not be). MN-001-002 Connection and mounting Caveat Ban This machine is DC12V grounded vehicles only Please do not use in 24V vehicles. Fire and late It becomes the cause of the disabled. In place to interfere with the operation of the air bag Is not an absolute to the mounting wiring If you are installing the air bag equipped car, the vehicle We will continue to check the notes on the work of the manufacturer Please. Air bag malfunctions, of fatal accident It may cause. Place to prevent the forward visibility and driving operation Place, in a location that is hazardous to passenger I am not attached to the absolute It becomes the cause of traffic accidents and injuries. Turn off the coating of the power cord, other Do not take the power of equipment If the current capacity of the power cord is over, fire Disaster or electric shock, it may cause malfunction. The mounting safety parts (stearic Ring, brake, volume of the tank, etc.) Belt and nut are not used to the absolute If you use these, braking inability or fire, traffic The cause of the accident. Caveat Ban The antenna, in order to meet safety standards Na You can paste the stomach place, with re-paste Paste in the only and general-purpose of double-sided tape Not or Peeling poor visibility and the antenna is, the cause of the accident It becomes. Forcing

Mounting and wiring, change the mounting location, cheap To ask your dealer for all The mounting and wiring and removal, expertise and experience Is required. incorrect installation and wiring, remove If you have teeth, if you cause a serious hindrance to the car I have. In addition, the mounting and by yourself Wiring can cause injury. Work before I remove the terminal of the battery The short of and route, electric shock or injury It may cause. Before work, pipes, tanks, electrical It will confirm the position of such wiring If you are installing to a hole in the vehicle body, pipe Do not interfere, contact with and Louis tank electrical wiring Please note strangely. In addition, the processing of the service Please perform the treatment of bi-stop and flood prevention.

Page 3

Three Introduction CRA4803-A Caveat Forcing Be sure to use the supplied parts, surely Fix If you use other than the supplied parts, equipment internal parts And damage the goods to the outside can not be securely fastened It is to become a hindrance of operation, and cause of the accident or injury Will. You want to connect and installed in accordance with instructions When you make a connection, attached to not follow the instructions, It may cause a fire or failure. The coating is not part of the code tape Insulation, etc. By short-circuiting, fire or electric shock, and the cause of failure Will. Body and threaded portion, a seat rail Do not sandwiched between the code which the moving parts The wiring will Iyo By disconnection or short circuit, fire or electric shock, of failure It may cause.

If cords and interfere with driving operation Fixed so as not Steering and selector lever, brake pedal When wrapped around such as Le, it becomes the cause of the accident. After installing the wiring is complete, power Make I see goods to work restored successfully Be sure When used in a state that does not work properly, and Ya fire Electric shock, it will cause a traffic accident. Small parts such as screws, of infants Store out of the reach of hand If swallowed, immediately phase to doctor Please be Dan. Note Ban Hot air of direct sunlight or heater directly it is not attached to the location where you hit The internal temperature will rise, and cause a fire or failure There is a thing. Preparative unstable the antenna and monitor It is not attached to a time It may cause such as dropping. Do not block the vents and heat dissipation plate Internal heat build up to, and cause a fire or failure There is a thing. Cords are not cut in the middle of absolutely And if the cords that with fuses Some reason, no longer work protection circuit, fire It may cause. Note Ban Wiring of the cords, the body of the high-temperature portion It is not brought into contact with the It may cause a fire or electric shock. Products shipped with power leads, back It is not directly connected to Terry It may cause a fire or electric shock. Current is insufficient, the power directly from the battery If you take, you will use a dedicated wiring kit Please. It is not a branch wiring

Cable is heated, it is a fire and electrical shock hazard There is Rukoto. place and water and condensation that rain blows, dust Ri, in the place where such as soot is mixed It is not installed Smoke or fire, it may cause a malfunction. Forcing So that code does not touch the metal parts Wire A damaged power cord is in contact with metal parts, fire Or electric shock, it may cause a malfunction. Antenna and camera before and after the car width and car It is mounted in a location that does not protrude from the In contact with, such as a pedestrian, and the cause of the unexpected accident It may become. Write pull the antenna code or the like in the car No case, be aware of the infiltration of rainwater If rainwater is entering the car, the cause of fire or electric shock It may become. How to use Caveat Ban Driver not operate while driving It might cause a traffic accident becomes a front carelessness Vinegar. Is operation after stop in safe place Please be. The driver does not watch the image while driving It may cause a traffic accident becomes a front carelessness. It is a retreat operation and screen to increase the speed Do not retreat operation of while watching the only Video back camera uses a wide-angle lens It has. Since the actual distance and the feeling is different, There is a possibility that the hit to the people and things. In addition, Not be retracted while confirms safe visual Please be. People who have become blind spot of the camera There is a possibility that the hit on and things, an unexpected accident original It becomes the cause.

Page 4

Four CRA4803-A

Caveat Ban Hand or fingers in the media insertion slot, the foreign matter Not put Injury or electric shock, it may cause a fire or failure. It is not wetted with liquid It may cause smoke or fire or electric shock. In particular Please note that in families with children. Screen is not displayed, no sound, voice Abnormal and failures, such as it is broken, distorted Do not use the state unexpected accident, fire, or may cause electric shock. NO contact If thunder is heard, antenna code Do not touch the soil and the machine There is a risk of electric shock from lightning. Disassemble Do not disassemble or modify Traffic accidents and fire, it may cause electric shock. Forcing Run in accordance with the actual traffic regulations Only to route guidance by the navigation Therefore, when traveling, it is contrary to the actual traffic regulations There is a case, it will cause a traffic accident. When the driver watch TV and video Huang, parking blanking be sure to stop Bet the rake TV and video, while driving for safety display It will not be. When replacing the fuse, be sure Provision capacity fuses (amps) To use If you use a fuse that exceeds regulated capacity, fire It becomes the cause of the disaster and failure. Note Ban This machine is not used except for automotive Smoke or fire, it may cause electric shock or injury There. Do not touch the heat radiating portion of the amplifier It may cause burns.

Forcing Degree volume, the outside of the sound can be heard It used to in When driving in a state in which the outside of the sound is not heard, exchange It may cause accidents through. Note Injury of finger Note The hand at the time of monitoring of the storage and angle adjustment It will be careful not to pinch your finger or It may cause injury. Abnormal time of inquiry Caveat Forcing In the unlikely event abnormality occurs, immediately Discontinue use, Sir always reseller Consult the screw consultation Continuing to use the unexpected accident or fire-sensitive It becomes the cause of the power.

Page 5

Five Introduction CRA4803-A Introduction Safety Precautions ................................. 2 Book How to read .................................. 11 How to book conventions ......................... 11 Please read .............................. 12 Attention to customers ............................. 12 ......................... 12 for operation of the machine Of 3D hybrid sensor For automatic learning ......................... 12 In order to prevent the battery up of the car ... 12 If you remove the battery terminal About reconfigured ............................. 12 About SD Memory Card ............. 13 For LCD screen ............................. 13 For map data ......................... 13 For customers of the registered data ... 13 Copyright ................................................ . 14

For security functions .............. 14 Other ................................................. 14 QUICK SETUP ............................ 15 Perform QUICK SETUP .................... 15 ............ 15 to start the QUICK SETUP Preparation .............. 19 for watching TV Basic operation Part Names and Functions .................. 20 Navigation body (State closed the screen monitor) ....... 20 Navigation body (State opened the screen monitor) ....... 20 Steering switch (Vehicles only) .................................. 21 You are here screen touch key .................. 21 Basic Operations .......................................... 22 To operate the touch panel .................. 22 Operating in button ............................. 23 Screen switching how ......................... 23 ...... 24 to adjust the angle of the screen monitor To adjust the image quality ................................. 25 Operation of the list screen ............................. 25 Disk out of ......................... 26 And out of the SD card ....................... 28 Character input operation .............................. 30 .......... 30 to switch the method of character input Flow of character input operation ...................... 30 To switch the type of character .................. 30 Enter the character ................................. 31 No conversion, conversion is carried out ........................... 33 To end the character input ......................... 33 Symbol can be kana-to-kanji conversion .................. 34 Table of contents

Page 6

Six Table of contents CRA4803-A Basic navigation operation Navigation of the basic operation ........... 35 Operation of the navigation menu ......................... 35

Operation of the shortcut menu ...... 38 Map screen of the operation .............................. 39 To display the current position screen ...................... 39 To move the map (scroll) .............. 40 To change the scale of the map .................. 41 To change the display method of map .................. 41 To change the orientation of the map ......................... 42 The passage display 100m scale while The ON / OFF to ................................ 43 The ON enlarged display of character / OFF to ..... 44 Register the scale ......................... 44 To the display settings of the logo mark ............ 44 Show coordinate ................................. 46 About side map ...................... 46 Safety Information ...... 48 About e start guide ................... 48 About screen that is displayed while driving .... 49 For highway mode .............. 50 To return to the home ...................................... 54 To register the home ................................. 54 To route search to your home .................. 54 Search Location Find ...................................... 55 Search by map ......................................... 55 Search by name ......................................... 55 Search by Address ......................................... 56 Search by genre ................................. 57 Find surrounding facilities ................................. 57 Search by telephone number ................................. 59 Find from the registration areas ................................. 59 Find from the search history ............................. 60 Search by map code ...................... 60 Find an easy destination search .............. 61 View detailed information .............................. 62 Root .......................... 63 to explore the root Route guidance start screen How to read .......... 64 ...... 65 to confirm the root profile ............................. 65 to choose the other route Show route map ...................... 66 ...................... 66 for a detailed route setting

For route search function .................. 69 Root induction and Information .......................... 70 You are here screen during route guidance .............. 70 The induction by voice-guidance ...................... 73 Operation during route guidance and function ........... 76 When you deviate from the route Automatically re-explore the route ...... 76 The new route according to the situation The proposed ......................................... 76 And to guide the traffic jam information on the route ... 77 Route information of operation ... 77 .......................... 78 to edit the route Check the root profile ...... 78 And to re-explore the route by changing the conditions ... 78 To clear the route ............................. 79 ......................... 79 to postpone a stop-off place It is confirmed by demonstration run ......................... 79 .......................... 80 to clear the route

Page 7

Seven Table of contents Introduction CRA4803-A Registration and editing operation To register the location .............................. 81 To register the location ................................. 81 .......................... 83 to edit the registered location .......... 83 to edit the contents registered in the registration area To erase the registered location ............................. 84 ............................. 85 to migrate the registered location To edit other data ........... 87 To clear the search history ......................... 87 To erase the learning contents of the root .......... 87 ......................... 88 to erase the traveling locus Use of various types of information ............ 89 to use the FM-VICS information The VICS information ................................... 89 View VICS information on the map ............... 90 And to guide the traffic jam information on the route ... 91 View characters and graphics information of VICS ........ 92

..................................... 93 to select a broadcast station To use the ETC information ..................... 94 ................. 94 to display the ETC usage history ................. 94 to display the ETC registration information To perform the ETC setting ................................ 95 ....... 96 for use of the vehicle maintenance Set the time to replace, such as consumables ... 96 ................................. 97 Advanced Settings Notice confirmation screen ............................. 97 Use of other information ...................... 98 .......... 98 to check the serial number Sensors to see the learning situation .................. 98 ......................... 99 to check the connection status ........ 100 to confirm the data version Setting of navigation ........................... 101 for the function settings Settings of detail .............................. 102 ............... 106 for the Bluetooth setting Bluetooth equipment Precautions ... 106 To perform the Bluetooth settings .............. 106 The volume of the navigation Set to ................................... 111 .............................. 111 to the volume settings To a guide / Phone Speaker setting ... 111 Set the vehicle information ................... 113 Toll classification setting of ............... 113 Setting of parking restriction (model) .................. 113 Setting of parking restriction (vehicle size) .......... 114 ................... 115 for other settings ........... 115 to correct the deviation of the vehicle position ........... 115 to switch the road while driving Setting the Security ............... 116 Show slide frame ................... 119 To return the set to the initial state ................... 119

Page 8

Eight Table of contents CRA4803-A Audio Basics Audio Basic Operations ............... 121

Show AV source screen ............. 121 To switch the AV source ................ 121 ............... 122 for the AV source to OFF ..... 122 to adjust the volume of the audio Video screen clock display setting ................... 123 The reception of the emergency warning broadcasting (EWS) and about to .......................................... 123 And renewable media on this unit File Type .......................... 123 It wants to receive a broadcast Listen to the radio ............................... 124 Receiving a radio broadcast ............... 124 The frequency scale display screen to switch .................................. 124 ............... 125 to choose the type of preset ...................... 125 to switch the band ............... 125 to register the broadcast stations manually Broadcast stations automatic registration .......................... 126 To listen to the traffic information ........................... 127 To receive traffic information ...................... 127 View one-segment broadcasting ................... 128 To receive one-segment broadcasting ............... 128 And switches the presets ... 129 ............... 130 to register the broadcast stations manually To switch the service ................... 130 .......................... 130 to display the program guide To display the program contents ...................... 131 Registered in the automatic radio stations (Channel scan) ................ 131 .......................... 131 to switch subtitles .......................... 131 to switch the voice ........... 132 for the function setting of one-segment Use music disk Listening to music CD ............................ 133 Playback .......................................... 133 Play by selecting from a list ........... 134 Repeat Play .................................. 134 Random play .................................. 134 CD-R / RW the (WMA / MP3) Listen .......................................... 135 Playback .......................................... 135

Play by selecting from a list ........... 136 Repeat Play .................................. 136 Random play .................................. 136 Use the SD card How to SD of operation ..................... 137 Playback .......................................... 137 Play by selecting from a list ........... 138 Repeat Play .................................. 138 Random play .................................. 139 Use the Bluetooth Audio Of Bluetooth Audio How to operate ........................... 140 Registration of Bluetooth Audio equipment ...... 140 Playback .......................................... 140 Play by selecting from a list ........... 142 Repeat Play .................................. 142 Random play .................................. 142 Of Bluetooth Audio equipment For connections .............................. 143

Page 9

Nine Table of contents Introduction CRA4803-A Use the AUX Using the AUX ................................. 144 To listen to the voice of external equipment ................... 144 Setting Audio ........... 145 for a set of audio Fader / balance setting ............ 145 Loudness setting .............................. 146 Equalizer settings .......................... 146 Source level adjuster setting ... 147 Mute setting .......................................... 148 Use the camera function Using the back guide monitor .... 149 The back guide monitor Note point of about .......................... 149 Notes on camera ................... 149 Select the guide way how ................... 150

To the back guide monitor screen Switching ...................................... 151 For range reflected in the screen ............... 151 Parallel parking (Course display mode) ....................... 152 Parallel parking (Parking guide line display mode) ........ 155 To parallel parking (Column guide mode) .................... 157 To parallel parking (Parking guide line display mode) ........ 166 Error between the actual road surface and screen ........... 168 Notes when the three-dimensional object is near ... 169 Setting the column guide of volume ............... 170 Display of the beginning of the tips ...................... 171 Display of the parking guide line ...................... 171 It is displayed during system initialization When it comes .................................. 172 Battery of desorption, or When it was replaced put this unit ........... 172 Using the back monitor ............... 173 Back monitor of the video ................... 174 Error between the actual road surface and screen ........... 176 Other operations Using a mobile phone ........................... 178 ............... 178 to the hands-free phone call Received phone how .............................. 178 Phone Kake-kata .............................. 179 Operation of a call in the menu ................... 181 Edit the mobile phone information ............... 182 ........... 185 to use the Eco-Manager For eco-driving evaluation ................... 185 Eco prize and ................... 186 .............................. 186 to the fuel consumption set Use personalization features ... 187 Show personalized screen ... 187 ...................... 188 Setting the User Using the user switching menu ... 191 Using the smartphone cooperation function ... 193 Using the NaviCon app ................. 193 Using the smart nAVVi Link app ... 194

Of the touch panel ........... 196 to adjust the touch position

Page 10

Ten Table of contents CRA4803-A Appendix Handling Precautions ................... 197 Correct use of the LCD screen how ........... 197 Correct use of a disk-type ........... 197 Correct use of SD card-type ......... 198 Notices radio ...................... 199 For disk ....................... 200 Type of disc that can be played ........... 200 The configuration of the disk ............... 200 WMA / MP3 / AAC / About WAV files ............ 201 Folders and WMA / MP3 / AAC / About WAV files .............. 201 The WMA? .................................... 201 And MP3? .................................... 202 The AAC? ..................................... 203 And WAV? .................................... 203 Navigation mechanisms ........... 204 How You are here can be seen ................... 204 Mechanism for increasing the positioning accuracy ... 204 For error is .................................. 205 Failure kana? If you think ............... 207 Common items .......................................... 207 Navigation .............................. 207 Audio ...................................... 208 ETC ................................................. 212 For reset ......................... 213 About body reset ................... 213 About sensor reset ........... 213 VICS information pay broadcasting Service Agreement ................... 214 Other information ............................... 216 In Search For database ................ 216

Note about the root matters ............... 216 Notes on VICS information matters ......... 218 City map (detailed city map) Recording area .................................. 218 From the Hanshin Expressway Co., Ltd. Contact .......................................... 219 For recording database ........... 219 For after-sales service ........ 221 Specifications ............................................. 222 Such as trademark and copyright ....................... 223 Index .............................................. 225 Menu index .................................. 225 Concordance .......................................... 227 Symbol marks list ....................... 235

Page 11

Eleven Introduction CRA4803-A How to book conventions Signage Meaning Instruction mark Operation or the like will be noted in the context of performing, in order to maintain the performance of the product It describes the fact that I would like you to observe. Memo The operation on It should be noted and with that hint, describes such convenient ways you can use. Go back It represents the touch key. Example: Touch to return slide It represents the slide operation. For example, it will be referred to as " slide" the slide operation to the left. It represents a button that is attached to the navigation body. Example: press the (menu) italic I would like you to see text and title page or will lead to other instructions,. Example: "find the location."

(P55) Long press / I long touch It indicates to press the (touch) it until you hear a "beep". Press continue / Continue to touch Press and are only between (being touched) it indicates that it is operating. Memo In this manual, SD memory card, are collectively referred to SDHC memory card is being referred to as "SD card". Illustrations and screen examples you use in this book, it may be different from the actual product. Screen of the actual product, due to the performance and functional improvement, it may be subject to change without notice. Proper nouns, such as product names that are mentioned in this document are trademarks or registered trademarks of their respective owners. This book of how to view

Page 12

Twelve CRA4803-A Please read Attention to customers Of emergency facilities (hospital, fire station, police station, etc.) For search and route guidance, and in each facility Please check directly. This unit, the parking brake ON / OFF By detecting, by watching the video of the TV while driving It is so could not have been. It issues a navigation operations and disk When you put in, stop the car in a safe place Is allowed to, the car of the select lever N (New Tral) or to the P (parking) position, Per It goes carried out from over the parking brake Sai. The Kappuhoru when the monitor part of the unit is open Containers such as juice and placed in Zehnder interference

you might want to. Intelligent key is attached In the car, the intelligent key to the machine Or it may no longer work as close Since you, please be careful. If this unit was replaced put on another car, if Clause is installed in your car in a location other than the Toyota dealer If you gave Ri, sure, such as setting dealer always Please do the certification. For operation of the machine This machine, the touch panel and the body of the button Hoyo In fine steering switch (vehicles only) To manipulate. Of 3D hybrid sensor Automatic learning This unit, each overlapping the traveling, 3D hive Automatic learning of the lid sensor advances, positioning We are increasing accuracy. The explosion of the battery rise of car To Gutame When it comes to you use this machine, be sure of the car en Please over gin. It is multiplied by the engine When you use the machine when it is not, battery Lee is exhausted. Memo For environmental protection, it parked more than necessary idly Ing should be avoided. Place to remove the battery terminal For re-setting of the case If you remove the battery terminal in the maintenance, such as, If the setting of each function has returned to the factory state Because there is, please set again. Other features that your own has been set have any Once Mashi goods, again set with reference to each page

Please refer to the constant.

Page 13 13 Introduction CRA4803-A About SD memory card In the text, SD memory card and The SDHC memory card, convenience, "SD It is referred to as card ". This machine, SD card and SDHC card It supports (up to 32 GB). It also ensures the operation of all of the SD card There is no than. During access to the SD card, SD card Please do not remove the. In addition, car keys Please do not change the switch position. There is a possibility that the data may be damaged. The If it is damaged in the act, such as, compensation You ca n't. SD card has a limited service life. Normally used and such as iodide also have successfully writing and erasing There are times when it is no longer the operation. SD we are recognized by you have a personal computer If the card is, it is not recognized in rare cases this unit I have. In this case, the SD card not Depending on the condition, dedicated to format And certified by formatting tool You may want to identify. In addition, personal computer SD When you format a standard feature of To become a non-compliant format, Day Can other write or read, it is Kotogaa that problems such as not occur Since Ri you, in a dedicated format software It recommended that you perform the format operation Are we. However, if you format, SD Data recorded on the card are all lost You. During the format, be sure SD Car You can create a backup of Dodeta Please go.

SD card format software Is, of SD Association following Home It will be available than the page. https://www.sdcard.org/jp/ Not of the SD card in the format work To be construed as a guarantee by us the condition repair No. Furthermore, the present work, the SD card Loss of data, as well as, other damage occurs If you have, and not bear responsibility as our It does. And format software manual Well made and to read, to the end, your Format work in the original judgment and responsibility Please run. About the LCD screen LCD screen, the angle that looks on the structure clean It has been limited. When it is new , As screen look great, to see the corner And be sure to adjust the black density in accordance with the time There. In addition, you can change the brightness of the LCD screen You bet you can. And will be adjusted according to taste Please. ( P25) For map data You need to insert the map disc in the player No. The map data, the machine built-in memory It is recorded in. Customers of the registered data About In the repair of the machine, the customer has registered Warranty of data, pardon Kedah Sai. Registered various functions to the navigation The contents of such settings, accident or malfunction, repair Resona Place to be altered or lost by other handling of There is a case. Important contents taken us a copy

Rikudasai. Should content has changed or lost With regard to damages and lost profits in the case We can not bear responsibility therefore absolutely, Oh Luo advance, please understand. Please read

Page 14

14 CRA4803-A Copyright Recording data and programs to the machine Copyright, copyright for our company and our It was attributable to the third party that was granted the rights under Cage you. Customers, any form smell Even if all of these data and programs Replicate or part, modified, and vinegar, such as analysis You can not. The security features This machine, security machines by password It has a built-in function (theft deterrence function). Out Load at the time of the security function is operating or To do. Setting security functions as necessary Please be constant. "to the security settings That "(P116) Other For the purpose of performance improvement of product, in this unit To record the operation history information (such as positioning result) It has the ability to. Contact the operation history information Personal information of the customers are not included. In addition, Base and the Company of this information our specification It can be analyzed only in the specified subcontractors We have become a mechanism, and have your consent It will be used only if the only digits. , Match this unit to your particular purpose It does not guarantee that you. The appearance and specifications of the machine, the pre for improvement You may want to change WARNING without. The

Modification of the product before the change in the case, or The other I do respond to request your replacement You. The fact of the camera screen, the performance and functional improvement Therefore, it may be subject to change without notice. Screen example, the actual screen you are using in this book And there are times when it is different. Please read

Page 15

Fifteen Introduction CRA4803-A QUICK SETUP The basic configuration of the machine, it can be done easily in accordance with the instructions on the screen. After your purchase, you have not done and security settings when you begin using the machine for the first time If, automatically QUICK SETUP will start. The settings, change later You can also further. Do QUICK SETUP Items and order that can be set in the QUICK SETUP It is as follows. Security Settings Security of the navigation system You can set the utility. Volume settings Navigation of the guide volume, earpiece volume, ringtone You can set the amount and operation sound. Home setting I can home of registration and change. ETC mounting state setting It has installed a vehicle ETC equipment in the car

You can set up or not or. Bluetooth Settings You can register a Bluetooth device to this unit You. Vehicle information setting Car toll classification and parking restrictions, Length, width, you can set the height. Fuel consumption set Fuel consumption set of general roads and highways You can. The fuel the set a number based on Fee calculation is, to perform route search Was when, less most fuel consumption Lou To display the door as eco route Rukoto I can. Personalization settings User icon, user name, Anne The internal volume, operation sound, and map display You can be set on a per-user basis. Started QUICK SETUP Make One To start QUICKSETUP to Touch Memo If you want to set a later time, and set at the next startup to Please Touch. Also next startup QUICK SETUP will start. In addition, the unit If you from other startup you want to make the setting, (mesh New) - Setting and editing - QUICK SETUP from The settings can also be. Not set When you touch, QUICK SETUP The is not carried out, to display the map screen. However, the back If you have not done Kyuriti setting, Set Not you can not touch to. During QUICK SETUP setting, to the next I want to touch on To the next setting, Previous settings before you touch an You can move to.

Exit When you touch, the setting of up to that point Save and QUICK SETUP Exit screen ( P18) It will move to. Setting items other than the ETC mounting state setting, it It is to be set individually from the Settings menu Can you.

Page 16

Sixteen CRA4803-A Security Settings Two Security function Touch to, Setting the Security of Memo The security settings to the setting of the password Is required. "Setting the Security" (P116) Three Next I want to touch on Volume settings Four + or - , ON or OFF Touch and to set in Adjust the volume of the "guidance volume" navigation voice guidance To you. "Beep" And set the ON / OFF of the operation sound of the machine You constant. "Earpiece volume" hands-free calls when the reception sound of We will adjust the amount. We will adjust the incoming volume of "Ring volume" phone. Five

Next I want to touch on Setting of home Six Home registration you will touch on Memo If you already have at home you are already registered, registration change is It will be displayed. Step Touch Seven To go to, It can be overridden by changing the home location You. Seven Looking for a location ( P55), decision It will touch on Eight Next I want to touch on Setting of ETC mounted state Nine Touch to choose the state Memo When set to "is attached to the car", feature set Constant ( P101) "Smart IC consideration route search" of It will automatically turn ON. In addition, of either Even when the set function setting ( P101) Of "ETC lane guide display" will be changed to ON. During route guidance, you will not be able to set. Ten Next I want to touch on QUICK SETUP

Page 17

17 Introduction CRA4803-A

Bluetooth settings Eleven Device registration it will touch on Twelve Touch the device name to be connected Memo If the equipment to be connected is not in the list, the other party equipment Registering from Bluetooth devices by touching the Please register Ri. For more information "Bluetooth machine To register the vessel "( P107) Please visit. For more information about Bluetooth settings, "Make the Bluetooth settings" ( P106) It is Goranku Please. 13 Next I want to touch on Setting of the vehicle information 14 Set the contents by selecting each item Memo Set parking limit (car make vehicle dimension), parking It is reflected in the guidance of the car park and toll road fees. And during route guidance, in the case of the highway mode, You can not set the "toll segment". Fifteen Next I want to touch on Setting of fuel consumption Sixteen Set the contents by selecting each item Memo Fuel consumption of the guideline has entered the factory. Input Fuel consumption to force customers I confirmed in such dealer Please enter the fuel consumption had left. 17

Next I want to touch on QUICK SETUP

Page 18

Eighteen CRA4803-A Setting of personalized User currently in use ( P188) Dedicated You will do the setting. Eighteen Set the contents by selecting each item Memo For detailed settings of the personalization settings Te is, "To the user settings" ( P188) The visit Give me. 19 Next I want to touch on Exit the QUICK SETUP Twenty End it will touch on Previous One it will return to the previous screen. Introduction Back QUICK SETUP start screen ( P15) It will return to. QUICK SETUP

Page 19

19 Introduction CRA4803-A Prepare for watching TV After purchasing the machine, when the first time to visit the TV (one-segment broadcasting), it can be received Work (channel scan) to be registered on the machine looking for a channel is required. Until the channel scan is complete, you will not be able to visit the TV.

Memo Detailed information on how to television, "I see one-segment broadcasting" ( P128) Please visit. Channel scan, please do in a place that is easy to receive radio waves of television. (Underground parking, etc. You may not receive radio waves. ) Or when you remove the car battery, the settings initialization ( P119) Channel scan even when you are required. One Bet the car engine Two When the map screen is displayed I press the (audio) AV source screen is displayed. Three TV I want to touch on Four Touch the screen Simple operation screen appears. Five More touch the Basic operation screen appears. Six Scan it long to touch If the channel scan is completed, the hand Levi screen appears.

Page 20

Twenty CRA4803-A

Names and functions of each part Navigation body (the closed state of the screen monitor) Menu button ( P25, 35) It will display the navigation menu. Long press and image quality adjustment screen ( P25) It is displayed. Security indicator Security function is operating If that is be blinking I can. ( P118) You are here button ( P23, 24, 39) In the case of the navigation screen (showing the other location), It will display the current location. If during the current location display, and change the registration scale You further. In the case of AV source screen, You are here I switched on the screen. In either case, the screen, temporary and long press Basis you can turn off the screen. Audio button ( P23,121) In the case of the navigation screen, AV It is switched to the source screen You. Press and hold, the AV source It can be in the OFF Vinegar. AV source is OFF Press and hold the AV source Before the AV source to the OFF It will return to the nest screen. Open button ( P24, 27 ~ 29) Out of disk and SD card, Adjust the angle of the screen monitor It will display the operation screen of the eye. I / I button Track and file of down / up and rewind / Fast-forward and do the audio operations such as.

Volume adjustment button ( P122) Volume adjustment of audio It will do. AUX input terminal ( P144) Portable players Which external device to connect to Vinegar. 3.5 mm stereo Insert the mini plug. Hands-free microphone Navigation body (state that opened the screen monitor) Disk insertion port ( P27) Insert the CD and CD-R / RW To you. SD card slot ( P28) Insert the SD card.

Page 21

Twenty one CRA4803-A Basic operation Steering switch (vehicles only) MODE switch Radio and CD, it will switch the AV source, such as a TV. Long press and AV source It makes the nest OFF. / switch Audio, such as track and file of down / up and rewind / fast forward Oh it does. - / + Switch We will adjust the volume of the audio. Touch key of the current location screen User icon touch key User eye set in the personalization settings It will display the configuration. When you touch, in the use of the personalization features Can you. For personalization features, and details Clause "Using the personalization features" ( P187)

Please visit. Congestion touch key ( P77, 91) If we are to get the congestion information route If you are in guidance, and display congestion information To you. If it is not in the route guidance Is, it will show the regulatory information. View touch key ( P41) Guests can choose how to display and orientation of the map, one-way mer You can set the display and non-display of a phrase or logo. The character of the expansion and map scale, which is displayed on the map It can also be done, such as registration. Wide area / detail touch key ( P41) And roughly the display range of the map You can expand (regional) in Na display, Reduction in the precision displayed (details) to I or you can. Info window touch key And location information (city) each time you touch AV information (such as AV source names and playing in the title name) It will switch the. Easy destination search touch key When you touch, the grain a search item Table the destination menu that crowded Ri It is shown. For more information "Kan was Professionals named Search by destination Search "( P61) Please visit. Memo Display item of the location information of the information window (city name, traveling road name, latitude and longitude), set in advance You can in advance. "function to the setting" (P101) When the information window is the case of "city name", "traveling road name", map scale display is equal to or greater than 100 m It will be displayed until the city name. Displaying detailed city map of 10 m ~ 50 m, city name, address name, Ding

It appears to the eye. There is also a place where it does not appear depending on the location. Names and functions of each part

Page 22

Twenty two CRA4803-A Basic operation We'll explain the basic operation of the machine. Operated by touch panel Mark and items are displayed on the screen (operation Direct contact with a finger on the touch key) and (Touch That) it will be able to operate by. Example: End The final and menu that are currently open The completion was to return to the original screen. Go back Such as menus that are currently open It will return the screen to the previous screen. Slide operation And slide your finger while touching the screen up, down, left, or right Navigation by simply wells and audio You can operate some functions of the organization. One It will touch on the slide reaction area Example: CD Slide reaction area slide frame Memo Slide frame is displayed a predetermined time on the screen, slide It will show the id reaction area. Slide frame of the icon ( ) Is a finger It indicates the direction in which it is possible to ride. Slide eye of reaction area and the slide frame Con depends on the displayed screen.

If slide reaction in the area, where the screen If you touch you can do the slide operation. Slide frame is to be turned ON / OFF display Can you. "view the slide frame" (P119) Operation guide will be displayed. Operation Guide Two While touching the screen, run The slide your finger to the direction in Thailand function And release by de The selected function is displayed in an enlarged size, and function operation To you. Slide operation capable screen and each operation content Please refer to the following page.

Page 23

Twenty three Basic operation CRA4803-A Basic operation Slide operation list Operation screen Behavior Navigation Route Information slide: display cancellation of route information slide: Display of the next guide land Intersection guide map slide: display cancellation of the intersection guide map slide: Display of the next guide land Roadblock consideration auto re-route slide: Check Roadblock Audio Transportation information

Slide: 1 620 kHz reception slide: 1 629 kHz reception Slides: unmute slide: mute Radio / TV Slides: channel down slide: channel up Slides: unmute slide: mute DISC (CD, CD-R, CD-RW) / Bluetooth Audio Slides: track or file down slide: track or file up Slides: unmute slide: mute SD Slides: file down slide: File up Slides: unmute slide: mute AUX Slides: unmute slide: mute Cellular phone Phone during an incoming call Slides: hang up the phone slide: answer the phone Operated by button Use the button on the unit, the switching of the screen, Display of the menu screen, I audio of operation Etc. It is possible to carry out. Switching of the screen how Navigation screen and the AV source Switched the scan screen Navigation screen (map screen) and the AV source One-A screen (audio / video screen) It can be switched in touch. One In the navigation screen (O Press the audio)

Page 24

Twenty four Basic operation CRA4803-A AV source screen is displayed. Two In AV source screen (Hometown) Push Navigation screen appears. Memo Even in a state of displaying an AV source screen and less There are cases where the information is interrupt display. Automatic display of -VICS emergency information ( P91) - Intersection guidance display ( P71) Interrupt display of the AV source screen (intersection guidance Display only), you can be ON / OFF. "function to the setting" (P101) Temporarily turn off the screen (Navi standby) At night, if the screen is bright, such as temporarily You can turn off the screen. One Long press (Hometown) Screen will disappear temporarily. Memo When you touch the screen during navigation standby, original It will return to the screen. Also, pressing (Hometown) To display the current position screen by releasing navigation standby To you. When you press the (audio) Nabisutan Release the by to display the AV source screen. In Navi standby, voice draft of navigation Inside also will not be output. Sound of audio out

It will be a force. Back guide monitor ( P149) During use, It will release the temporary navigation standby mode. At the time you have finished using the camera function, automatically It will return to the navigation standby mode. Also Navi standby by the ON / OFF of the ACC Not released. And adjust the angle of the screen monitor Make Come and adjust to a comfortable viewing angle the screen monitor It can be . One Press the (open) Two + or - you want to touch on + Screen monitor opens one by one stage. - Screen monitor will close one by one stage. Memo Angle memory of this machine was adjusted screen monitor Is, power supply OFF / ON (engine switch OFF / The ON) and it will be automatically adjusted angle even. If you want a different angle, and it will adjust again Sai.

Page 25

Twenty five Basic operation CRA4803-A Basic operation Manually or tool adjustment of the angle of the screen monitor Please do not forcibly performed using. Screen monitor

May fail with a strong force is applied to ter You. When you adjust the angle of the screen monitor, things Please be careful not to pinch. Caught mono In the time we had, remove the it caught thing Please adjust from. Adjust the image quality Brightness and view angles of the surrounding, to match the picture "Black of depth", "Contrast", "Brightness", "color Temperature "," depth of color ", adjust the" tint " Thing I can. Memo And automatically set the day and night in conjunction with the car lights It will switch to. Set of "black of depth", "Contrast", "brightness" Constant can be set separately in the day and night. Setting the "brightness" other than "color temperature" window You can be set separately for each type. "Color temperature", aging ne of LED backlight In any reason, you have displayed on the monitor of this unit If an error occurs in the color of the actual video and video It will adjust to such. Also the video during the display of the back guide monitor, and the following It is possible to adjust image quality by performing the operation You. The adjustment of the back guide picture, the ambient Please go while safely full consideration of. You can not operate while driving. One In the display screen of the image to be adjusted, (Menu) press for more than 2 seconds Two Touch the left and right of the touch key Adjust

Depth of black (white) Become thin (black) Thicken Contrast (light and dark) Low The difference between the black-and-white is small High The difference between the black-and-white is large Brightness Dark Darken Ming Lighten Color temperature (red) Warm color system becomes stronger (blue) Cool system becomes stronger Color strength Pale Become thin Concentrated Thicken Tint (red) Redden (green) Become green Memo Depth of color, one-segment broadcasting or back guide It adjusts only if you are viewing the monitor image Rukoto I can. Shades, back guide mode only when Nita you are viewing a video, to adjust Thing I can. Three Back to Touch Operation of the list screen Common operations on the list screen that is displayed during operation

We will describe. Operation Basic List

Page 26

26 Basic operation CRA4803-A The feed page It will move one screen at a time. / It will touch on (And continue to touch, It will move continuously. ) The feed tab And Sen in the tabbed list The switch to a list of do's tab Ri I will instead. Tab (example: root Guidance it will touch on) 50 operation of sound tab Line feed The line feed the child a list You bet you can. (Example: Oh or Is the was I) Tab ( Oh ~ I standing) Chisuru It sends sound The sound list Feed child You bet you can. (Example: Oh have sales e e) (Eg tab Oh is repeated in) Touch returns 50 sound at the time of the side map display Operation of the tab Feed Na was revealed To put the list on the next page Rukoto I can. It will touch on

(Example: It was revealed Yara Hama ) Memo To return to the list on the previous page, Touch the You. For side map, Attached to the "side map Te " ( P46) Please reference to. Operation of the check list In the checklist, touch the item And (check mark) is displayed, select It indicates that it is a . Again section When you touch the eye It disappears, selected release It is. Operation of the indicator with a list The indicator with a list, select an item List the right side of the indicator lights and is, it indicates that it is selected. Another To select the time item and indicator is off It is, will be deselected. Out of disk And using a manual or tool the opening and closing of the screen monitor Please do not attempt to place Te. Screen monitor You may want to failure and strong force is applied to. When the opening and closing of the screen monitor, and pinch your stuff Please be careful not. It was caught mono When it was waiting, remove the stuck ones Please open and close. Wearing the adapter 8 cm disk absolute Please do not use to.

Page 27

27

Basic operation CRA4803-A Basic operation Injury of finger Note When you open and close the screen monitors, fingers Etc. and attention so as not to pinch Do There. Please note especially for children. It may cause injury. Disk Inserting One Press the (open) Two Disk insertion touch the Screen monitor opens. Three Insert a disk Disk insertion port I to the label side Automatically when you insert the disc partway and retracted, the screen monitor is closed. Disk of the pickup type One Press the (open) Two Disk eject touch the Screen monitor is opened, the disk is automatic It will manner pushed out. Memo another one in a state in which the disc has been pushed up to the middle When you press the degree eject button, the disk is automatically and retracted, the screen monitor is closed. Three Remove the disc, (O Press the Pung) Screen monitor it will close.

Page 28

28 Basic operation CRA4803-A And out of the SD card The Day of the SD card when you are using with this unit Even if others lost, and compensation of the lost data Nitsu Please pardon be had. And using a manual or tool the opening and closing of the screen monitor Please do not attempt to place Te. Screen monitor You may want to failure and strong force is applied to. When the opening and closing of the screen monitor, and pinch your stuff Please be careful not. It was caught mono When it was waiting, remove the stuck ones Please open and close. When forced to carry out the loading and unloading of the SD card, and Ya this unit There is a possibility that the SD card may be damaged. PLEASE NOTE Give me. In SD card slot, even the non-SD card Please do not insert the. Gold, such as coins If you insert a genus products, failure internal circuit is damaged Of the cause. For safety reasons, while driving out of the SD card Please do not. Injury of finger Note When you open and close the screen monitors, fingers Etc. and attention so as not to pinch Do There. Please note especially for children. It may cause injury. Of SD card Inserting One Press the (open) Two

SD card insertion touch the Screen monitor opens. Three SD "clicks" and until the sound is Plug the card The label side Plugging in SD card slot SD card Four I press the Screen monitor it will close. Lee in a state in which the SD card is not fully inserted Close the screen monitor and press the button object Rukoto can not. In addition, the SD card when the Message and sound proposal to encourage the correct insertion of the soil It will be inside. Do be sure to insert the SD card Please press the Luo eject button. Removal of the SD card-type One Press the (open) Two SD card removal and touch Make Screen monitor opens.

Page 29

29 Basic operation CRA4803-A Basic operation Three SD "clicks" and until the sound is And release by pushing the card SD card will be pushed out. Four

Straight pull out the SD card, Press the (open) Screen monitor it will close. Picture in a state that does not completely remove the SD card Please do not close the surface monitor. The card It may be damaged. In addition, SD Car Soil Press the center slowly, straight-preparative Please put out Ri. SD card taken out, put in a special case By Runado, please keep. Also, a false So that there is no such child swallow Te, Please be considerate to storage location.

Page 30

Thirty CRA4803-A Conversion cut the method of character input Obtain Character input of this unit, two methods (keyboard Child is carried out by selecting from a de system mobile phone system) You bet you can. One Or It will touch on Each time you touch, the conversion to cut as follows Wari you. Keyboard system Mobile telephone system Flow of character input operation Flow of general character of the input operation, the following It will be the cormorant. To switch the type of character Enter the characters To non-conversion, do the conversion character input I want to end the Switch the type of character One

It will touch on the type of character Type of character is switched. Memo To the Chinese character conversion input, Kana and then touch. To the katakana input, once hiragana input After switching, Cana and then touch. Character input operation "ATOK", Ltd Registration of JUSTSYSTEM It is a trademark. When you register such as the location of the name and phone number, enter the letters and numbers. Here, Is displayed during menu operation, it describes how to input operation of letters and numbers. Memo Letters, numbers, Katakana, Hiragana, Kanji, symbols can be entered. Depending on the item, you may be the type of characters that can be used is limited. For example, in the case of a name search, the ratio Lagana are not available other than the input. This unit, the character input conversion system, JustSystems Corporation "ATOK "I am using.

Page 31

31 CRA4803-A Basic operation Enter a character Basic operation If you want to enter on the keyboard method One Touch to the character you want to input If you want to enter the mobile phone system One Or the character you want to input is displayed

In, you want to touch the key Input Example 1: Japan Na Touch twice to "to" It is to touch two five times "to the ho" Wa Touch three times "Japan" Input Example 2: Ota Oh to Touch 5 times "Contact" > Touch to "Contact _" Oh to Touch 5 times "many" Other Touch once "Ota" Switch the full-width-half-width Katakana, in the case letters, numbers, symbols em - You can switch the single-byte. One Em or half-width touch the It will switch to full-width or half-width. Voiced, half-voiced, the upper / lower case Change In the case of hiragana and katakana, and chose a character You can add a voiced sound and semi-voiced sound by, lowercase It can be switched on. One lowercase I touch the Each time you touch, the cursor left and character But it will change as follows. Lowercase voiced half voiced original character Return to the Example 1: Tsu Tsu ~Tsu Uz Tsu Example 2: Ha Ha bus pa C Uppercase / lowercase Switch the character During alphabetic input, upper / lower case You can switch between. One Large / lower case I want to touch on Each time you touch, uppercase and lowercase letters off Ri I will instead. Character input operation

Page 32

32 CRA4803-A Move the cursor position One The top right of the screen < - > it will touch on Move the position of the cursor only touched minute You can be. Memo If in the character input, the cursor is displayed in the same color And it can be moved within that have been character range You. If the input screen in the search, the < - > The cursor in It is not possible to move the le. If in kanji conversion, and a range of characters to be converted It can be changed You want to delete a character One The car on the right side of you want to delete a character Move the Sol, remove standing in Chisuru Each time you touch, the statement to the left of the cursor Character is deleted one character at a time. Cursor If that someone is on the left end, removed the right of the character It is. Only the necessary amount by deleting the character, It will repeat the input. Memo Delete When you long touch, all of the characters once You can be removed. Free up space One Of the character we want a space Move the cursor to the right, Space I want to touch on

space is inserted only touched minute. Insert a character One To the right of where you want to insert a character Move the cursor It is inserted text at the cursor You can. Memo Cursor, range of characters that are displayed in the same color You can move in . Character input operation

Page 33

33 CRA4803-A Basic operation Do non-conversion, the conversion You can directly enter the Hiragana, Hiragana I will convert such as kanji and katakana. Conversion Conversion, which is displayed according to the characters entered Be selected from the candidate (predictive conversion function) You can. Make a non-conversion input One Enter the characters in hiragana, No conversion I want to touch on It is entered in hiragana. Make the conversion input One Enter the characters in hiragana conversion candidates is displayed in response to the input characters Will. Two Conversion Touch to, confirm or All confirmed I will touch on Memo

Next candidate When you touch, the candidate list appears You. input when you touch on the converted character you want Can you. or When you touch, the character to be converted You can change the range. It is entered in the converted character. It wants to end the character input One Input end it will touch on Character input operation

Page 34

34 CRA4803-A Symbols can be kana Academic symbol Reading Symbol Equal = Congruence Dainari > Will award < Vatu Inequality sign Plus / + + Minus / grind - Plus or minus

Mugen / Mugendai Because Therefore Play Waru Greek character Reading Symbol Alpha / alpha Iota Epsilon Upsilon Ohm / omega Omicron Buy / key Cucumber Gamma / gamma / xi Theta Zita Heavy rain

Delta New Pi / copy / fee Psi / Pushi Beta Low Parentheses Reading Symbol Parentheses '' "" () [] [] {} "" "" "" [] Symbol mark Reading Symbol Black spot Black circle Win White circle Participation Viewing angle Zukei

Circle Beetle, Epilachna round Diamond Star Male Female Postal Unit Reading Symbol Yen Angstrom Celsius Capital relocation Unit '" $ % Etc. Nikki at $ Percent % View Per

Tack " Poop ' Lb Point Reading Symbol Voiced sound mark ,, ... Handakuten Circle . . Arrow Reading Symbol Arrow Other Reading Symbol Asterisk / Asterisk * Attomaku @ Ampersand & Note From / to ~ Rice / Star Sharp Lane

/ \ Section Dagger Daburudaga Aimlessly Character input operation

Page 35

35 Basic navigation operation CRA4803-A The basic operation of the navigation Operation of the navigation menu To use the various functions of this machine, the beginning To me to display the navigation menu. One In the navigation screen And press (menu) Navi menu appears. Information Of congestion information and the unit system Such as information, the operation of the various types of information To display the menu to perform You. Destination For finding a destination and location It will display the menu. Setting and editing Set of navigation functions Constant, audio settings, telephone and Such as the setting of communication, various settings - The Table menu about editing It shows you. Cellular phone For using a mobile phone function It will display the menu.

Bluetooth device is not registered If you encourage the registration message Message appears. Yes to Touch, and carried out the registration operation Please be. ( P106) Eco-Manager Eco prize and eco-driving Review Check value of history, fuel consumption set Etc., the menu on eco It is displayed. Route editing Such as route editing and erasure View menu to perform turf Vinegar. ( P78) Root erase To clear the route in guidance (medium Stop) the. ( P80) Information Menu Congestion information The check and information acquisition congestion information Do you. ( P92) Data version Display Map data that has been recorded in this unit The version of the search data You can check. ( P100) Maintenance Car of consumables (engine oil And the time to replace the tire, etc.) Message display to inform Setting of I can. ( P96) System information and serial number of the machine Hoyo Fine sensor learning of the situation and the machine Make the information of devices connected to the You can sure. ( P98, 99)

ETC The dealer installed option on the machine Down the navigation interlocking ETC system It is displayed when you connect, It is possible to confirm the ETC usage history You. ( P94)

Page 36

36 The basic operation of the navigation CRA4803-A Destination menu Name Search by entering the name of the destination You. ( P55) Street address Search by entering the destination address You. ( P56) Genre Ken specify the genre of destination You search. ( P57) Surrounding facilities Specify the genre of the vehicle surrounding facilities It is then retrieved. ( P57) Phone number Ken enter the phone number of the destination You search. ( P59) Registered location The destination is selected from the registered point Nde it finds. ( P59) Search history Destination from the point where it was searched in the past And choose to search. ( P60)

Home It will search for a route to the home. ( P54) Home of the tow if home is not registered We will do the recording. ( P54) Map code Enter the map code of destination It finds Te. ( P60) Setting and editing menu QUICK SETUP Following the instructions on the screen, the unit of a group We will make this setting. ( P15) Navigation set and edited by the navigation function We will do the collection. Audio The setting and editing of audio function Do you. Telephone and communications Setting and editing of telephone and communication functions It will do. Navigation Navigation data Edit Day, such as registration areas and traveling locus We will do other editing or erasing. ( P83, 87) Navigation function set to line set of navigation functions There you. ( P101) Volume settings The Ya guidance volume of navigation The adjustment of the operation sound, hands-free We will adjust the volume when. ( P111) System Settings Make the settings for the system. (

P111, 116, 119, 170, 171) Vehicle information setting make the setting of the vehicle information. The settings are, parking and toll It is reflected in such fee guidance of the road Will. ( P113) Vehicle position correction is set if the vehicle position is shifted To you. ( P115)

Page 37

37 The basic operation of the navigation Basic navigation operation CRA4803-A Audio Audio Setting You can set the audio function You. ( P145) TV set Setting of one-segment broadcasting reception function It will do. ( P132) Video screen clock Display You want to display the clock on the video screen on the You set or not. ( P123) Telephone and communications Bluetooth Setting This unit and Bluetooth device Set in the case of Bluetooth connection To you. ( P106) Volume settings The Ya guidance volume of navigation The adjustment of the operation sound, hands-free

We will adjust the volume when. ( P111) Mobile phone data Edit Reading and application of the memory dial Such as the elimination of credit history, mobile phone information And edit and erase Hou. ( P182) Mobile phone menu Dialing or a phone call by entering the phone number You only. ( P180) Memory dial power by calling the memory dial We will put the story. ( P180) Call History Arrival and departure it will display the trust of history. ( P180) Redial I will make a phone call in the redial. ( P181) Bluetooth Setting This unit and Bluetooth device Set in the case of Bluetooth connection To you. ( P106) Edit and erase Reading and application of the memory dial Such as the elimination of credit history, mobile phone information It is subjected to editing and erasing Hou Can you. ( P182) Eco Manager menu Eco prize Thumbnail screen of eco prize It is displayed. ( P186)

Fuel consumption set Criteria of eco route display of measurement Make the fuel consumption of the settings that the. ( P186) Eco-driving evaluation History To view the history of eco-driving evaluates the Vinegar. ( P185)

Page 38

38 The basic operation of the navigation CRA4803-A Shortcut menu Operation Automatic to after looking for a place to move the map Manner the displayed menu that shortcut It called the menu. Route search and point Registration, be carried out such as the display of detailed information Can you. One The scroll or location map Find ( P55) To display status of the position and the map of the cross cursor Thus, the short cut in accordance with the respective -Up menu appears. When scrolling screen I register here Is this the current cursor position It is possible to be registered in the machine You. ( P81) Look for the surrounding facilities Facilities around the cursor position Search by selecting a genre You can be. ( P57)

Go to here Destination the arrow cursor position As, or to perform a route search Vinegar. ( P63) Search results when the screen Information Search location to the detail information place where the data is recorded If the display detailed information turf Vinegar. ( P62) I register here and registers the search location to the machine You can be. ( P81) Look for the surrounding facilities Search location around the facility Search by selecting a genre Thing I can. ( P57) Go to here the searched location and destination Te, it will make the route search. ( P63) Memo the found and to scroll the map after inspection Back to the search point , but it appears. When you touch, To return to the point before the scroll.

Page 39

39 Basic navigation operation CRA4803-A Operation of the map screen The map display of the navigation displays the current location of your car (the vehicle), "You are here image Location to display that you want to see the plane, "there is a" scroll screen ". You want to display the current position screen

Even if any screen, you can return to quickly present location screen. One Press the (Hometown) You are here in the map will be displayed. Memo In a state in which to display the current position screen (You are here) When you press, map scale that was registered ( P44) To To switch (you are viewing in the registration scale It does not work in this case). You are here screen see how Normal view Bearing mark Red orientation mark There triangle indicates North To you. Scale display Touch key Under ] There of scale It shows the distance. (2D display only) Current time Locus display GPS receiver in the mark ETC CARD mark Vehicle mark Traffic information provision time display During SD access mark smartphone cooperation mark For more information Please visit. Bluetooth connection in the mark "I use the smart phone linkage function" ( P193)

Page 40

Forty

CRA4803-A Memo And when you use the first time this unit, when you did not use a long period of time, it takes to to display the current location about 5 minutes There is a thing. Vehicle mark is, you may deviate from the actual location. Trajectory display, you can view the travel locus of about 250 km worth passing through until now. Usually white, the car speed Red when less than 5 km / h, is 5 km / h more than 20 km / h time of less than it appears in terms of orange. ETC CARD mark, Navi linkage ETC system of dealer installed option can be connected to this unit, and ETC Card will be displayed if the insertion already only. Current time, it is displayed based on information from the GPS satellite. It is not possible to time of change. Moving the map (scroll) Move the map to the location where you want to see on the map. One Touch in the direction you want to see on the map Make map as the touched location becomes the center That it will move. Memo Scroll Move your finger while touching the screen also it works, and away from the center of the screen cursor to Enough to touch was in place, the speed at which you scroll It will be faster. However, while driving it was touch You can only scroll to the location. 8-direction arrow ( P40) Showing or Shitima~tsu -Flops ( P42) In the case of, the scroll operation while driving It can not be done to the.

Two If the position you want to fine-tune, Tweak it from Touch, fine The integer you want the direction of the arrow (8 directions) It will touch on Each time you touch the arrow, map little by little One it will move. Once again fine-tuning When you touch, 8-way Direction of the arrow will disappear. Memo Operation of fine-tuning, the map display mode of normal If the view is possible only. Operation of the map screen

Page 41

41 Basic navigation operation CRA4803-A Change the scale of the map Map in the range of 10 m ~ 500 km scale You can change the le. One Details or wide area it will touch on More detailed map than appears. Table Range shown will be narrower. Wide-area map is displayed in a wide range from. Narrow roads, etc. will not be displayed. Memo Detail and wide area each time you touch the, and 10 m, 25 m, 50 m, 100 m, 200 m, 500 m, 1 km, 2 km, 5 km, 1 0 km, 2 0 km, 50 km, 100 km, 200 km, 500 km and vinegar Kale display will change. Details and wide-area and continues to touch, in succession You can change the scale.

Change the display method of map The map display method according to different situations You can change. One View I want to touch on Two I want to touch on the display method of map Memo Highway mode is selected only in the toll road traveling You can. Scroll the screen look the way Normal view Line connecting the crosshair cursor from the current location Cross-hair cursor Operation of the map screen

Page 42

42 CRA4803-A Type of display method Normal view It is displayed in the normal map (2D map). Detailed city map recording area ( P218) In, Detailed city at the time of the 10 m ~ 50 m scale Town map is displayed (City map). Memo Automatically usually land in the vicinity of the boundary of the city map The display switches in the figure. City map You can also display the boundary. In that case, City map only appear in the vicinity of the boundary, boundary The outside nothing is displayed. City map display and the City map boundary table Shows can be ON / OFF. "function to the setting" (P101)

Sky View Map as seen from the sky (3D Map) There will be displayed. Eco-information display Eco-driving evaluation screen ( P185) There, the right side of the map It appears in. Highway mode Fee is a special screen at the time of the road traveling. Distance and rates up to the front of the toll road facility, expected Arrival (passage) time, and whether the branch is displayed You. For highway mode, "Highway For by mode " ( P50) Please visit. Change the orientation of the map Map display orientation in the normal view F There are fading up and north-up. The factory is "heading up". Heading up One View - heading up to Touch Operation of the map screen

Page 43

43 Basic navigation operation CRA4803-A So as to be above "direction of travel" is always, map That it will rotate automatically. North up One View - North up standing in Chisuru It will be displayed as "north" is on top always. 100 m scale one-way

I ON / OFF the display One-way mark to be displayed in the City map A, a call to be displayed even when the 100 m scale You bet you can. The factory is "OFF". One View - 100 meters scale while Traffic display touch the The 100 m scale while each time you touch Traffic display of ON / OFF is switched. Memo For the side maps highway mode table It can not be shown. We have to set the scale of the map in addition to 100 m That case, automatically 100 m vinegar When set to ON It switched to kale. Operation of the map screen

Page 44

44 CRA4803-A ON the enlarged display of character / To OFF Statement of place names and facility name to be displayed on a map screen You can to enlarge the character. The factory is "OFF". One View - character enlarged display of map It will touch on Characters enlarged display each time you touch ON / OFF is switched. Register the scale For each display method of each map, the scale You can register Le. The registered scan Kale, the map screen by pressing the (Hometown) It becomes the scale at the time of the display. One

Scale you want to register the map screen Display in Two View - scale registration I will touch on A confirmation message will be displayed. Three Yes I want to touch on To the display settings of the logo The table the logo of various facilities on the map You can make shown. One View - logo display setting It will touch on Operation of the map screen

Page 45

45 Basic navigation operation CRA4803-A Two Ja you want to display the logo Touch the Nru The selected logo will be displayed on the map. Choose from all of the list Choose from all the facilities that are registered in this machine You. One View - logo display setting - Full list you want to touch on Two Ja you want to display the logo Touch the Nru Three Facility you want to display the logo It will touch on Indicator of the selected facility lights is, you can choose continue. Memo

The indicator also lights up if you select more than one You. When you touch the facility again, the indicator consumption The lights will be deselected. To select the other facilities, and returns to step Touch Two Returning to the screen, the procedure Two ~ Three Repeat the go Please. Four End it will touch on Back to the map screen, Rogoma of facilities that chose Clause appears. You want to customize the list Changing settings in the list corresponding to the favorite I can. In addition to the genre name, the facility name You can also be displayed. One View - logo display setting - Customize it touches the Two Touch to you want to change genre name Three It will touch on the genre name of your choice Operation of the map screen

Page 46

46 CRA4803-A Four It will touch on the hope of Facility Name Step 2 to return to the screen of the list is changed You.

When subsequently performing a changing operation, Step 2 Please repeat the subsequent operations. You want to hide the logo Turn off the display of the selected logo from the map The, you do the following. One View - logo display setting It will touch on Two Display: ON touch the Display: OFF it becomes, It is chosen logo It will disappear from the map. Memo Again to display the logo, Display: OFF Touch Display: ON I want to. You want to display the coordinates It will display the coordinate information on the current location. One You are here screen, (Hometown) Push Two Coordinate it touches the Coordinate information is displayed. About side map Lee Find highway mode display and location place to strike the screen, displaying the information such as screen If the map screen is displayed on the right side of the screen (Side map). Memo For basic operation of the list, "Basic Operation of the list " ( P25) Please visit. For the operation of the side map screen,

"Side Operation of the map screen. " ( P47) Please visit. Operation of the map screen

Page 47

47 Basic navigation operation CRA4803-A Highway mode In highway mode, the current position or combing To roll destination facility map of again map It will be displayed. List screen In the list screen, such as when you find a location, select Map in the vicinity of the facility, which is the Saidoma~tsu It appears in-flops. Candidate display screen In the candidate display screen, the facilities have been selected The location of the map will be displayed on the side map. Information screen In the graphic information and character information screen of VICS, Information Map of the area surrounding the vehicle position along with the screen again It appears in the map. Operation of the side map screen In the side map with list screen, is selected Position of the list item that is a, Saidoma~tsu It appears in-flops. Information Detailed information of the location you have selected ( P62) You can display a. Go here as a destination to the location you have selected Route search ( P63) It will do. Memo

Scale display ( 100 meters When you touch, etc.), You can change the scale. Operation of the map screen

Page 48

48 CRA4803-A Safety informational Tion Various guidance for safe driving according to the situation It takes place. Toll road attention point - Border guidance Approximately kilometers from here Until then, be aware enough operation Please be. The earlier, the confluence there from the right Ri you. Please note. The earlier, the confluence there from the left Ri you. Please note. Ahead, there is a confluence. Please note. it enters the prefecture. Railroad crossing guidance This is a former railroad crossing. Rather Notes Please. Refresh guidance I will be soon 2 hours. Why do not you break? Light lighting guidance shortly day is late. La Please refer to the confirmation of the thread. e start guidance is sudden acceleration. Mind the safe driving Let cliff. Narrow street guidance Note to the actual traffic regulations and road width Please traveling in mind.

Memo Toll road attention point-border guidance, run a toll road Only in a row it is done. Railroad crossing guide, there is no railroad crossing ahead of the road while driving If you are guided if there is a railroad crossing near even if I have. Also, it is guided at all crossings Not divided. And even when the sunset time, already lit light If you are, the light lighting guidance does not take place. ON / OFF can for each of the guide Vinegar. "function to the setting" (P101) For conditions such as the following, are not guided Be the case and the actual situation and the different guidance There. Actual traffic conditions and traffic rules and signs Please be operated in accordance with such. - When the vehicle position is not displayed correctly - The way in actually traveling with the map that is displayed when the road situation is different About e Start Us Speed from the start start until after about 5 seconds Upon detection of more than 41 km / h, sudden acceleration of warning It is guided by the WARNING message and voice. Memo e start guide I can ON / OFF. "function To the Settings "(P101) Operation of the map screen

Page 49

49 Basic navigation operation CRA4803-A On the screen that is displayed while driving

About When the signal approaches The traveling direction, a signal within about 300 m Mark of the machine will be displayed up to a maximum of five locations. When traveling on the toll road When traveling on the toll road, automatically highway Instead cut into by mode (auto high Way mode). Memo Auto highway mode, ON / OFF can Vinegar. "function to the setting" (P101) There are also some display outside the scope of the toll road. To manually switch to the highway mode, Yu The "leaf in the view switching menu in charge during the road traveling Choose the Iu~ei mode ". "Show how the map We change the law. " (P41) Operation of the map screen

Page 50

Fifty CRA4803-A For highway mode The distance of the highway mode, until the interchange and service area that is currently headed Away, and you can confirm and facility information. In addition, in accordance with the running of the car, automatically the next facility It will switch to the information. Facility information of the main line or on the branch destination also, you can see. Highway mode You are here screen of seeing how Toll road facility information close to the second Facility Feed touch key Screen is changed to the cursor mode, and sends a toll road facilities in order of proximity to the current location

It will continue. Use, for example, if you want to see the toll road facility close to the fourth. You are here Display (Side map) Toll road facility information close to the first ETC lane guide Or the presence or absence of the ETC board equipment It is displayed unchanged. Toll road facility information close to the third SA / PA Feed touch key SA and (service area) PA (parking area) We will send only to order You. Memo Map the orientation of the side map of highway mode will be heading up fixed. In the highway mode, each type of facility (IC / PA / SA / JCT / lamp / toll / smart IC) and facilities Distance and expected time remaining until arrival (pass) from the and location will be displayed. The following facilities and service information of the facility ( P52) It settled to when descended from the fee (pass or toll road and In the case of facilities) is displayed. When you touch on the map portion of the side map, it is used to display the map in the vicinity of facilities in location and selection Can you. SA / PA Feed If you touch, you can send only the service area and parking area in order. If the illustration information to the next facility is recorded, if you select the next facility, illustrations will be displayed. If there is a branch destination route to the next facility, you can select the branch destination. If the branch facility and SA / PA to the next facility is the hotel, you are prompted to select either. If you have to get the VICS information, VICS information ( P89) There will be displayed. During route guidance, when it comes to approximately 1 km before the toll road exit guide of the toll road exit is displayed, an exit Automatically highway mode when you pass will be canceled.

View If you touch, you can switch to choose another display map. Also, from other map display If you return to the highway mode, the right screen will be displayed in the map display of the angle of the previous. (For example, just before the earth If diagrammatic representation of Skyview, right screen of highway mode will be displayed in 3D. ) Operation of the map screen

Page 51

51 Basic navigation operation CRA4803-A About price indication If you set a route on the toll road, Rates may not appear. If the price of non-compliant route to " ***** " If it contains fee non-compliant routes " ***** Yen or more "is displayed. Rates display is possible because, urban expressways, urban During high speed, and it is part of the toll road. "Paid For road fee data " (P219) Rates displayed, by the vehicle setting, midsize car, Ordinary car, it can be switched to light car. "Setting the vehicle information."

(P113) Correspondingly, for the various ETC discounted rates No. See ahead of facility information In the highway mode, it is allowed to postpone the facility You can see the destination facility information Te. One Next facility , before the facility is touch And then choose the facility you want to display Facility in selection Memo By directly touching the previous facility, select the facility Rukoto I can also. Side map ( P46) Peripheral facilities in selected to Of the map is displayed. During route guidance, the facility is sent along the route You. If you touch to the facility in the selection, facility periphery of the selected You can display the side of the map. Map the displayed facilities, search history ( P60) It is registered in You. illustrations information has been recorded in the selected facilities If, illustrations will be displayed. If there is a branch destination route to the selected facilities, and branch The screen to select the destination is displayed. You can see up to 100 facilities destination.

branch facility and SA / PA is annexed to the chosen facility If you have that, the display screen to select either It is. When you press the (Hometown), highway mode current of Hometown screen appears. See the branch destination of the information of the branch facility The If the route is not set, running It is possible to see the facility information along the route You. Branch facility in the middle, regardless of the presence or absence of the route If so, look at the previous information by selecting the branch destination Rukoto I can. One Standing in the facility name by selecting the branch facility Chisuru Two Touch to branch destination you want to see Memo Map When you touch, the land of the point where there is a branch