novatek presentation

NOVATEK INDIA NOVATEK INDIA

INTETELLIGENT INDUSTRIAL ELECTRONICS

МИКРОПРОЦЕССОРНЫЕ РЕЛЕЙНЫЕ УСТРОЙСТВАwww.novatek-electro.com

AUTOMATION, CONTROLS AND PROTECTION

SINGLE PHASE VOLTAGE PROTECTION RELAYSSINGLE PHASE VOLTAGE PROTECTION RELAYS

RN-1 1 1 RN-1 1 1 М RN-1 0 1

■ up to 3.5 kW directly■ more than 3.5 kW via magnetic contactor

Operation range from 30 to 150% of rated voltage and built-in time relay

RN-1 0 1 М

FOR THE PROTECTION OF SINGLE PHASE POWER SUPPLY CONSUMING EQUIPMENT AND MACHINERY – TO PROTECT IT FROM UNALLOWABLE VOLTAGE DROPS AND FLUCTUCATIONS

DIN rail mounting Plug-Socket case performance

V OL T A G E P R OT E C T ION R E L A Y P H-1 0 2 ( 3 2 A )V OL T A G E P R OT E C T ION R E L A Y P H-1 0 2 ( 3 2 A )

FRONT PANEL INDICATION OF RMS VOLTAGE VALUE EASY WALL MOUNTING INSTALLATION SHORT CIRCUIT PROTECTION USING BUILT IN MINIATURE MCB 32А HIGH REQUENCY INTERRUPTIONS FILTER, PROTECTING THE LOAD FROM SHORT CIRCUIT

OUTPUT POWER SUPPLY UP TO 6,5 kW (32A); MAXIMUM POWER CAPACITY 6.3 KW UNDER VOLTAGE THRESHOLDS RANGE Umin=160 ÷ 220 V; OVERVOLTAGE THRESHOLD TRIPPINF RANGE о Umах=220 ÷ 280 V; AUTORECLOSING TIME SETTING t= 5 ÷ 900 sec;

B E N E F IT S :

B A S IC T E C HN IC A L P A R A ME T E R S :

www.novatek-electro.com

B E N E F IT S A N D A D V A N T A G E S

OVER/UNDER VOLTAGE FAULTS PHASE LOSS PHASE IMBALANCE WRONG PHASE SEQUENCE PHASE COINCIDENCE MAGNETIC CONTACTOR CONTROL PROTECTION FROM NUISANCE TRIPPINGS

R N P P -3 0 1 R N P P -3 0 2 R N P P -3 1 1 R N P P -3 1 1 М

T HR E E P HA S E V OL T A G E P R OT E C T ION R E L A Y ST HR E E P HA S E V OL T A G E P R OT E C T ION R E L A Y S

C OMP L E T E C ON T R OL OV E R T HE V OL T A G E P A R A ME T E R S :

TRUE RMS VOLTAGE MONITORING PHASE OR LINE VOLTAGE MONITORING FRONT PANEL INDICATION DISTINGUISH TYPES OF THE FAULS WIDE OPERATION RANGE AND RELIABLITY NUMBER OF ADJUSTABLE PARAMETERS

T W O C HA N N E L T IME D E L A Y R E L A Y S R E V S E R IE ST W O C HA N N E L T IME D E L A Y R E L A Y S R E V S E R IE S

2 INDEPENDENT CHANNELS PARRALLEL CHANNELS OPERATION COMBINATION OF CHANNELS

TIME DELAY RELAY IMPULSE RELAY PERIODIC RELAY CONTROL RELAY AND PRE-STARTING SIGNALIZATION

-2 0 1РЭВ

-2 0 1РЭВ М

R E V -2 0 1 M MOD E S A N D B E N E F IT S :

R E V -2 0 1 OP E R A T ION MOD E S :

E L E C T R ON IC HE A L T HY P HA S E S E L E C T OR P E F -3 0 1

CONTROL OVER VOLTAGE ON EACH OF AVAILABLE LINES SELECTS ANY OF THE LINES WITH REQUIRED PROPER VOLTAGE PARAMETERS POWER RESERVATION OF THE RESPONSIBLE CONSUMERS COMPACT AUTOMATIC FALLBACK PANEL OPERATION LOAD UP TO 3.5 KW DIRECTLY WRONG VOLTAGE FAULT INDICATION PROTECTION FROM INTERPHASE SWITCHING OPERATION WITH GENERATORS BUILT-IN AUTORECLOSING TIMER

PROGRAMMABLE UPTO ONE YEAR; PERPETUAL REAL TIME CLOCK WITH LOCATION PARAMETRS, VOLTAGE PROTECTION RELAY; PHOTO SENSORS 2 INDEPENDENT CHANELLS WITH 4 PROGRAMMS PER CHANNEL FREE SOFTWARE WITH USB COMMUNICATION LCD DISPLAY ON FRONT PANEL

R E V -3 0 2

P E F -3 0 1

MU L T IF U N C T ION A L T IME R F OR ON E Y E A R

TIMERS AND HEALTHY PHASE SELECTORS

T E C HN IC A L P A R A ME T E R S :

OV E R L OA D R E L A Y R MT -1 0 1OP E R A T ION MOD E S :

DIGITAL AMPER-METER; POWER CONSUMPTION LIMITING RELAY; SELECTION OF THE PRIORITY POWER LOAD;

ADJUSTABLE CURRENT MONITORING RANGE: FROM 0 TO 100А;MEASUREMENT ACCURACY: 1%OVERCURRENT FAULT TRIPPING TIME DELAY 0 ÷ 300 SEC;AUTORECLOSING TIME DELAY: 0 ÷ 900 SEC , ∞;

BUILT-IN CURRENT TRANSFORMER; MAXIMAL CURRENT PROTECTION WITH INDEPENDENT TIMING; INDICATION OF CURRENT AND MAXIMAL VALUES; POSSIBILITY TO DISABLE AUTORECLOSING.

A D V A N T A G E S A N D B E N E F IT S :


A D V A N T A G E S :

A C MOT OR P R OT E C T ION D E V IC E SA C MOT OR P R OT E C T ION D E V IC E S

U B Z-3 0 1 P E R F OR MS C OMP L E T E MOT ORP R OT E C T ION IN T HE F OL L OW IN G C A S E S :

BAD QUALITY POWER SUPPLY VOLTAGE; SYMMETRICAL OCERLOAD ON PHASE/LINE CURRENTS DUE TO MECHANICAL MOTOR LOAD; ASYMMETRICAL OVERLOAD; PHASE CURRENTS ASYMMETRY WITHOUT OVERLOAD, PROTECTION ON STARTING/OPERATION CURRENT DRY STROKE AND ABSENCE OF THE LOAD ON THE MOTOR; EARTH LEAKAGE PROTECTION WITH SUBSEQUENT DISABLING OF AUTORECLOSING

EASY AND ACCURATE SETTING OF NOMINAL CURRENTS BEFORE THE MOTOR START THERMAL OVERLOAD TRIPPING BASING THE CALCULATION OF THE DIFFERENTIAL HEATING BALANCE EQUATION INDICATION OF THE FAULTS ON A FRONT PANEL PROTECTION AND OPERATION WITH THE MOTORS FROM 2.5 TO 315 kW DATA TRANSMISSION TO THE UPPER LEVEL ON RS-485 PROTOCOL


COMPLETE VOLTAGE/CURRENT PROTECTION LONG LASTING START PROTECTION LOCKED ROTOR AND DRY STROKING PROTECTION TEMPERATURE CONTROL OVER THE MOTOR COILS MOTOR COILS INSULATION LEVEL CONTROL EARTH LEAKAGE AND FREQUENCY VARIATION

DELTA/STAR SWITCHING OPERATION CASCADE MOTOR START (DELAYED STARTING OF MOTOR ONE BY ONE) REMOTE TRIPPING THROUGH RELAY OUTPUT

BUILT-IN CURRENT TRANSFORMERS AND PTs OPERATION OF MOTOR AND DATA TRANSMISSION ON RS-485 AND MODBUS OPERATION AND DATA TRANSMISSION ON RS-232 INTERFACE COMPLETE WITH MONITORING, RECORDING AND ANALYSING SOFTWARE

B E N E F IT S A N D A D V A N T A G E S :

U N IV E R S A L A C MOT OR P R OT E C T ION D E V IC EU N IV E R S A L A C MOT OR P R OT E C T ION D E V IC E

U B Z-3 0 2 P R OV ID E S :

2 OU T P U T R E L A Y S P R OV ID E T HE P OS S IB IL IT Y F OR :


S OF T W A R E S U P P OR T F OR R E A L T IME MON IT OR IN G , C ON V E N IE N T P A R A ME T E R S E T T IN G S A N D S C A D A S Y S T E M IN T E G R A T ION


C ON F IG U R E A N D A D J U S T A L L T HE C ON T R OL L E D P A R A ME T E R S U S IN G P C IN T E R F A C E


U N IV E R S A L A C MOT OR P R OT E C T ION D E V IC EU N IV E R S A L A C MOT OR P R OT E C T ION D E V IC ER E A L T IME R E C OR D IN G OF D A T A A N D F A U L T HIS T OR Y ,

G R A P HIC A L A N A L Y S IS OF R E C OR D E D D A T A

U S B -F L A S H D R IV E R E C OR D E R R P M-1 6 -4 -3

A L L OW S T O C ON N E C T A N D OP E R A T E U P T O 1 6 IN P U T ME A S U R E ME N T C HA N N E L S : 4 CHANNELS FOR AC VOLTAGE 1-500V MEASUREMENT RANGE; 3 CHANNELS FOR CURRENT REGISTRATION 0-1000А USING EXTERNAL CURRENT TRANSFORMERS; 2 TEMPERATURE CHANNELS FROM -25 TO +100С BY MEANS OF NTC SENSORS; 2 CHANNELS WITH STANDARD OUTPUT SIGNAL (0/4-20 mА, 0-10V); 5 DIGITAL CHANNELS FOR THE SENSORS WITH DISCRETE (DIGITAL) OUTPUT.

MEASUREMENT OF RMS AC VOLTAGE LEVEL; MEASUREMENT OF RMS AC CURRENTS; TEMPERATURE MEASUREMENT; COLLECT INFORMATION FROM PRIMARY TRANSDUCERS WITH STANDARD CURRENT OR VOLTAGE OUTPUTS RECORD OF THE MEASURED PARAMETERS AND VALUES ONTO EXTERNAL USB-FLASH DRIVE

R E C OR D E D IN F R OMA T ION IS P OS S IB L E T O V IE W U S IN G A N Y S T A N D A R D MS OF F IC E S OF T W A R E , A S W E L L A S W IT H T HE U S E OF T HE OR IG IN A L S OF T W A R E P R OV ID E D F OR V IE W IN G T HE G R A P HS A N D W R IT T E N D A T A

B A S IC A P P L IC A T ION A N D F U N C T ION S :


U S B -F L A S H D R IV E R E C OR D E R R P M-1 6 -4 -3

SOFTWARE INTERFACE FOR DATA ANALYSIS AND RECORDING HISTORY

T E MP E R A T U R E C ON T R OL F OR :

• IN D U S T R IA L A IR -C ON D IT ION IN G

• R E F R IG E R A T ION

• F R U IT -B A N A N A R IP P E N IN G R OOMS

• T E L E C OM MOB IL E B A S E S T A T ION A N D A T M T E MP E R A T U R E C ON T R OL L E R S

OPERATION WITH SINGLE AND THREE PHASE EQUIPMENT


T E MP E R A T U R E C ON T R OL L E R S MC K S E R IE S

• BUILT-IN VOLTAGE PROTECTION FROM ALL POSSIBLE VOLTAGE FAULTS

D IG IT A L T E MP E R A T U R E R E L A Y T R -1 0 0

MOTORS GENERATORS DRY TYPE HIGH VOLTAGE TRANSFORMERS

TEMPERATURE MEASUREMENT ON 4 INPUT CHANNELS; 4 RELAY OUTPUT FOR ALARM, FAULT, COOLING, TRIPPING AND INDICATION OF THE PARAMETERS

B E N E F IT S :

UNIVERSAL POWER INPUT POWER SUPPLY AC/DC FROM 24 TO 255V; RS-485 INTERFACE AND MODBUS RTU PROTOCOLS OF DATA TRANSMISSION

D IG IT A L T E MP E R A R U R E C ON T R OL L E R

P R OV ID E S P R OT E C T ION OF :


D IG IT A L T E MP E R A R U R E C ON T R OL L E RSOFTWARE INTERFACE FOR REAL TIME MONITORING AND

PROGRAMMING

B E N E F IT S A N D A D V A N T A G E S :

GALVANICALLY INSULATED FROM CIRCUITS

WITHSTAND 3 FOLD OVERLOAD

OUTPUT VOLTAGE SELECTION

1% OUTPUT VOLTAGE ACCURACY

BUILT IN PROTECTION FROM ALL FAULTS

FRONT PANEL INDICATION


T R A N S F OR ME R L E S S V OL T A G E S T A B IL IZE R S - L E G A T S E R IE S

COMPACT AND LIGHT DUE TO THE ABSENSE OF POWER TRANSFORMERS INSIDE (HIGH FREQUENCY MODULATION PRINCIPLE) WIDE OPERATION RANGE 100-280V, (FOR LEGAT-8 OPERATION RANGE 90-420V) 100% OUTPUT POWER THROUGHOUT ALL THE OPERATION VOLTAGE RANGE

N E W IN S IG HT T O V OL T A G E S T A B IL IZA T ION

F A S T R E A C T ION T IME1 0 0 % OU T P U T P OW E R

T HA N K Y OU

novatek presentation

Documents