notice of approval avis d’approbation … · instrument transformer: current type d’appareil...
TRANSCRIPT
AE-1818APPROVAL No. - N° D’APPROBATION
Page 1 of/de 5 Project/Projet: AP-AE-10-0178
Measurement Canada
Mesures Canada
An agency of Industry Canada Un organisme d’Industrie Canada
NOTICE OF APPROVAL AVIS D’APPROBATION
Issued by statutory authority of the Minister of Industryfor:
Émis en vertu du pouvoir statutaire du ministre del’Industrie pour:
TYPE OF DEVICE
Instrument Transformer: Current
TYPE D’APPAREIL
Transformateur de mesure: courant
APPLICANT REQUÉRANT
Alstom Grid Inc.,One Ritz Avenue
Waynesboro, Georgia, 30830USA
MANUFACTURER FABRICANT
Alstom Grid Inc.,One Ritz Avenue
Waynesboro, Georgia, 30830USA
MODEL(S)/MODÈLE(S) RATING/ CLASSEMENT
OSKF 72.5 2000 x 1000 MR
Accuracy class / Classe de précision:See“Summary Description”/Voir “description sommaire”
Rating factor / Facteur de surcharge: 1.2Frequency / Fréquence: 60 HzVoltage Class/Catégorie de tension 72.5 kV
AE-1818APPROVAL No. - N° D’APPROBATION
Page 2 of/de 5 Project/Projet: AP-AE-10-0178
NOTE: This approval applies only to meters, thedesign, composition, construction and performance ofwhich are, in every material respect, identical to thatdescribed in the material submitted, and that aretypified by samples submitted by the applicant forevaluation for approval in accordance with sections 13and 14 of the Electricity and Gas InspectionRegulations. The following is a summary of theprincipal features only.
REMARQUE: Cette approbation ne vise que lescompteurs dont la conception, la composition, laconstruction et le rendement sont identiques, en toutpoint, à ceux qui sont décrits dans la documentationreçue et pour lesquels des échantillons représentatifsont été fournis par le requérant aux fins d’évaluation,conformément aux articles 13 et 14 du Règlement surl’inspection de l’électricité et du gaz. Ce qui suit estune brève description de leurs principalescaractéristiques.
SUMMARY DESCRIPTION: DESCRIPTION SOMMAIRE:
The OSKF-72.5 is a post type current transformer.This transformer is equipped with a primaryreconnect.
Le modèle OSKF-72.5 est un transformateur decourant de type poteau. Cet transformateur utilize unprimaire de reconnection.
RATIO/TAPS
The following ratios are approved for revenuemetering:
RAPPORT/ENROULEMENT
Les rapports suivants sont approuvés aux fins defacturation:
1X2W (Parallel) 2000-5A
RatioRapport
TapEnroulement
Accuracy classClasse de précision
Rating FactorFacteur de surcharge
2000-5A X1-X5 Y1-Y5 Z1-Z5 W1-W5 0.3B1.8
1.2
1600-5A X2-X5 Y2-Y5 Z2-Z5 W2-W5 0.3B1.8
1200-5A X1-X4 Y1-Y4 Z1-Z4 W1-W4 0.3B1.8
1000-5A X1-X3 Y1-Y3 Z1-Z3 W1-W3 0.3B0.9
800-5A X4-X5 Y4-Y5 Z4-Z5 W4-W5 0.6B0.9
600-5A X2-X3 Y2-Y3 Z2-Z3 W2-W3 0.6B0.5
AE-1818APPROVAL No. - N° D’APPROBATION
Page 3 of/de 5 Project/Projet: AP-AE-10-0178
2X1W (Series / Serie) 1000-5A
RatioRapport
TapEnroulement
Accuracy classClasse de précision
Rating FactorFacteur de surcharge
1000-5A X1-X5 Y1-Y5 Z1-Z5 W1-W5 0.3B1.8
1.2
800-5A X2-X5 Y2-Y5 Z2-Z5 W2-W5 0.3B1.8
600-5A X1-X4 Y1-Y4 Z1-Z4 W1-W4 0.3B1.8
500-5A X1-X3 Y1-Y3 Z1-Z3 W1-W3 0.3B0.9
400-5A X4-X5 Y4-Y5 Z4-Z5 W4-W5 0.6B0.9
300-5A X2-X3 Y2-Y3 Z2-Z3 W2-W3 0.6B0.5
EVALUATED BY
Michael RozeboomLegal Metrologist
ÉVALUÉ PAR
Michael RozeboomMétrologiste légal
AE-1818APPROVAL No. - N° D’APPROBATION
Page 4 of/de 5 Project/Projet: AP-AE-10-0178
NAMEPLATE AND MARKINGS PLAQUE SIGNALÉTIQUE ET MARQUAGES
AE-1818APPROVAL No. - N° D’APPROBATION
Page 5 of/de 5 Project/Projet: AP-AE-10-0178
APPROVAL:
The design, composition, construction andperformance of the meter type(s) identified hereinhave been evaluated in accordance with regulationsand specifications established under the Electricityand Gas Inspection Act. Approval is hereby grantedaccordingly pursuant to subsection 9(4) of the saidAct.
The sealing, marking, installation, use and manner ofuse of meters are subject to inspection in accordancewith regulations and specifications established underthe Electricity and Gas Inspection Act. The sealingand marking requirements are set forth inspecifications established pursuant to section 18 of theElectricity and Gas Inspection Regulations.Installation and use requirements are set forth inspecifications established pursuant to section 12 of theRegulations. Verification of conformity is required inaddition to this approval for all metering devicesexcepting instrument transformers. Inquiriesregarding inspection and verification should beaddressed to the local inspection office of IndustryCanada.
APPROBATION:
La conception, la composition, la construction et lerendement du(des) type(s) de compteurs identifié(s)ci-dessus, ayant fait l’objet d’une évaluationconformément au Règlement et aux prescriptionsétablis aux termes de la Loi sur l’inspection del’électricité et du gaz, la présente approbation estaccordée en application du paragraphe 9(4) de la diteLoi.
Le scellage, l’installation, le marquage, et l’utilisationdes compteurs sont soumis à l’inspectionconformément au Règlement et aux prescriptionsétablis aux termes de la Loi sur l’inspection del’électricité et du gaz. Les exigences de scellage et demarquage sont définies dans les prescriptions établiesen vertu de l’article 18 du Règlement sur l’inspectionde l’électricité et du gaz. Les exigences d’installationet d’utilisation sont définies dans les prescriptionsétablies en vertu de l’article 12 du dit règlement. Saufdans les cas des transformateurs de mesure, unevérification de conformité est requise. Toute questionsur l’inspection et la vérification de conformité doitêtre adressée au bureau local d’Industrie Canada.
Original copy signed by:
Isabelle TremblayLaboratory Manager - Electricity MeasurementFORAdnan RashidSenior Engineer – Electricity MeasurementEngineering and Laboratory Services Directorate
Copie authentique signée par :
Isabelle TremblayGestionnaire de laboratoire -Mesure de l’électricitéPOURAdnan RashidIngénieur principal – Mesure de l’électricitéDirection de l’ingénierie et des services delaboratoire
Date: 2011-06-23
Web Site Address / Adresse du site internet:http://mc.ic.gc.ca