norwegian maritime equipment -...

1

Copyright 2016 by Erling Riisnæs. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior permission in writing from the publishers.

NORWEGIAN MARITIME EQUIPMENT

22. edition

Published by:Instituttet for Merkantil Informasjon a-sP.O. Box 1617 Kilen, NO-3206 Sandefjord

Tel.: +47-91 32 37 11e-mail: imi@ imi.no

www.maritime-suppliers.comwww.marine-system.nowww.seadirectory.com

PRODUCTS AND SERVICESFOR THE SHIPPING AND OFFSHORE INDUSTRY.

LISTING OF THE NORWEGIAN EXPORTERS AND THEIRFOREIGN REPRESENTATIVES

Summary from www.maritime-suppliers.com

1_4_2016.indd 1 07.08.2016 12:04:55

2

Forword ........................................................................................3

Product Names ...........................................................................5

Index to Product Categories ..................................................127

Main Product Categories: Accommodation Equipment ...................................................135 Air, Gas & Pneumatic Equipment ..........................................149 Automation and Control .........................................................159 Boats, Lifesaving, Safety & Firefighting Equipment ..............177 Construction & Operation Services .......................................193 Construction/Fabrication Equipment & Software ...................201 Deck Machinery & Equipment ...............................................205 Electrical ................................................................................215 Engineering/Management Services & Software ....................223 Hydraulics Equipment, Fluid Transfer and Treatment ...........229 Materials, Protection & Insulation ..........................................243 Navigation & Communication ................................................249 Power Generation, Propulsion & Manouvering .....................257 Special Purpose Equipment ..................................................271 Structures & Outfitting Details ...............................................279 Tanks and Heating/Cooling Equipment .................................293Index to the SFI-system groups ............................................305

Directory of Suppliers ............................................................373Sales Representatives, Alphabetical list ................................471Sales Representatives, Geographical list ..............................513Foreign Factories / - Producers / - Suppliers represented .559Trade Marks.............................................................................563

CONTENTS:

1_4_2016.indd 2 07.08.2016 12:04:55

3

FOREWORDWe hereby have the pleasure of introducing the 22th edition of ”Norwegian Maritime Equipment”

The content of this publication is made on information given by the com-panies introduced in "Directory of Suppliers". Therefore, the publisher are not able to guarantee the accuracy of the information obtained in”Norwegian Maritime Equipment” nor do they accept responsibility for errors or omissions or their consequences. However, all the information given is controlled and accepted by the companies listed.

We would like to thank the many companies/individuals who have trusted us by giving us the information for this publication and which have made this production possible.

IMI has, some years ago, carried out a major research project. The pro-ject was financially supported by the Norwegian Research Council as well as by organizations like the Federation of Norwegian Industries, Marine Div. and the Association of Norwegian Maritime Exporters. It aims at de-veloping solutions enabling suppliers to provide product specifications that customers may import directly in their outline- or building specificati-ons.

The major consequence for our customers is the change in how products are classified. Historically, products have been connected to one group only. We experienced that products had to be duplicated in order to be located via a multiple product groups. In addition to that, product groups have represented a “mixture” of products, some of them being solely component based (i.e. “cranes”), whereas others have been system based (e.g. “deck machinery”), and others re-presenting a combination (e.g. “deck cranes”). This resulted in a large number of product groups.

The present change in structure, as will be seen in this book, implies that products now are classified in a new component structure (Component Breakdown Structure, CBS). In this system the products are sorted by

1_4_2016.indd 3 07.08.2016 12:04:55

4

type. Then products are also associated with relevant functions or sys-tems according to the well-known SFI system, a group system widely used within the maritime sector.

For instance, products that earlier would belong to the group “deck cra-nes” will now be classified as component group “Cranes, crane equip-ment, etc” and then among the system group “Deck cranes for cargo” (SFI 33). This means that the product in the online version will be shown when searching for cranes in general, and at the same time searching for cargo handling equipment. Both CBS and SFI are defined in a tree struc-ture.

Users will now find it easier to search for and get hold of the relevant pro-ducts.

We have worked intensily to make the transformation to a new grouping structure as smooth as possible and to ensure good quality to our clients. However, this is a major change and we hope our good customers will let us know if improvement areas are found.

Next edition will be published in June 2017.

Sandefjord, August 2016.The Publisher

1_4_2016.indd 4 07.08.2016 12:04:55

5

PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305PRODUCT NAMES

5-126_PR_2016.indd 5 07.08.2016 11:45:31

PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305

6

AC DRIVES- Electrical motors & starters System groups: 62, 651, 7 STADT AS 6083 Gjerdsvika Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no STADT STASCHO is a No Loss AC drive that supplies sinusoidal voltage and current to the electric motor and back to the main switchboard. This gives very low harmonic disturbances without using transformers or filters. STADT STASCHO is specially developed for marine propulsion systems, where it is used together with controllable pitch propellers.

ACCOMMODATION LADDERS- Ladders, railings, stairs, ramps & gangways System groups: 564 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium can supply a wide range of Accommodation ladders including: - Telescopic ladders - Fixed ladders - Bulwark ladders - Pilot ladders

The accommodation ladders and gangways can be made with: - curved steps, - fixed ribs

- perforated non-slip grating - adjustable steps The ladders will be custom built according to your specification. Some items are however also in stock.

ACTUATORS- Hydraulic motors & actuators - Pneumatic actuators System groups: 601, 651, 79, 898 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Representing: Danaher Motion, Stockholm, Sweden: Linear actuation systems. MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se We supply pneumatic double-acting or single-acting with spring return. The actuators are mainly quarterturn actuators for butterflyvalves and ball valves or multiturn for gate valves and globe valves. We also supply linear actuators for gate valves, knife gate valves and globe valves. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com

5-126_PR_2016.indd 6 07.08.2016 11:45:31

7


Totally electric Actuator Ultra compact, high torque, easy control electric actuator for remote valve control. Based on permanent magnet motor technology from the PG-MAPS pumping concept. Wide range of scalable sizes, and ATEX 100 ex-proof available

ADSORPTION DRYERS- AC units, air dryers, air cooling and heating components System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2

AGITATORS- Pumps & pump units System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com

PG-Submix 60 / 80 (Hydraulic driven) Market leading product for OSV’s world wide for high yield liquid mud handling Flygt Mixers (electrically driven) World leading products for electric mudmixers

AIR CONDITIONING- AC units, air dryers, air cooling and heating components System groups: 57 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Teknotherm refrigeration plants for air-conditioning of accommodation, control rooms, etc. can be delivered either as direct expansion systems or as water chilling units for indirect cooling. According to the required capacity, or to your specific demands, our plants can be delivered with compressors of reciprocating- or screw type. Normally everything assembled to a condensing unit as comprise, compressor, condenser, electric motor and necessary auxiliary equipment..

5-126_PR_2016.indd 7 07.08.2016 11:45:31


8

AIR DRYERS- AC units, air dryers, air cooling and heating components System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2

AIR HANDLING UNITS- AC units, air dryers, air cooling and heating components System groups: 316, 362, 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® air handling units are designed to satisfy HVAC requirements for all accommodation spaces onboard ships. We offer a flexible range of units. The units are made up of modules that enable us to deliver solutions tailor made to each vessel and ventilation room. Our products come in selections of single or dual-pipe units, low or high pressure units. AERON® Marine Air Handling Units: . are assembled from a wide range of standard sections

. are available in 12 sizes up to 51000 m3/h

. have very good acoustic and thermal insulation . can be delivered both as galvanised or stainless steel . are delivered with wave breakers and water traps . fan and motor are mounted on vibration dampers with flexible connections AERON® Marine Air Handling Units are delivered with all necessary accessories in order to minimise installation work at the yard. The heat exchangers and evaporators can be delivered in any type of materials the customer demands.

AIS (AUTOMATIC IDENTIFICATION SYSTEMS)- Detection & identification equipment - Safety equipment KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex - AIS Onboard In accordance with IMO requirements all SOLAS ships in international traffic above 300 gross tons must have Automatic Identification Systems (AIS) installed onboard. We offer a wide range of different AIS for use onboard ships (AIS mobile stations) tailored to different requirements. All mobile stations are in accordance with the IMO regulations. AIS Infrastructure We provide a full range of AIS infrastructure used for shore-side and platform based AIS

5-126_PR_2016.indd 8 07.08.2016 11:45:31

9


infrastructure. Our long record of supplying AIS infrastructure, GPS reference networks and EGNOS monitoring systems has provided us with the competence needed to undertake AIS projects of all types. We are an active member of IEC, ITU and IALA.

ALARM SYSTEMS- Monitoring equipment System groups: 381, 40, 79, 792, 793, 795, 85, 87, 875 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering.

ALUMINIUM BOATS- Lifeboats/rafts & other boats System groups: 443, 501 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com High-speed boats in MP-design, Seabear, Alusafe and Weedo. Body sizes 5 - 25 metre.

ANCHOR CHAINS- Chains, wires & ropes System groups: 431 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations.

5-126_PR_2016.indd 9 07.08.2016 11:45:31


10

ANCHORS- Anchors System groups: 431 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Anchors in all sizes in stock.

ANSI VALVES- Air & gas valves - Fluid valves & other armatures System groups: 35 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve

- Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

ANTENNA COOLING UNITS- Antennas & transmitters System groups: 411 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® Antenna unit type AM is a lightweight, compact cooling unit designed for cooling of antenna systems. The AM unit is equipped with compressor, evaporator and air-cooled condenser all fitted together in a “ready to use” unit. The AM can operate at surrounding temperatures up to 65?C. The units will be delivered with thermostat and complete control panel for easy operation. The AM Unit is a compact, flexible and quiet running air-condition unit. The unit is designed to operate inside or below radar domes in a non EX zone. The unit normally has a cooling capacity of 2,5 - 3.5 kW.

5-126_PR_2016.indd 10 07.08.2016 11:45:31

11


The unit is built in stainless steel chassis AISI 316 quality for long lasting lifetime. The construction is strong due to the harsh environment often found in demanding marine and offshore installations.

ANTENNAS- Antennas & transmitters System groups: 411 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Comrod is a world leader in the design and manufacture of commercial marine antennas. All products are designed and manufactured to maintain exceptional performance while withstanding the rigours of the marine environment. Antennas are available covering the HF, maritime VHF, Cellular & Wireless LAN frequency bands. Multiband antennas are also available covering combinations of frequency bands.

ANTENNAS, DEFENCE- Antennas & transmitters System groups: 411 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no

Forces worldwide choose Comrod products for their superior design and combat proven performance. Comrod has collaborated extensively with end users around the globe in the development of HF, VHF, UHF & SHF antennas for military applications. The result is a product line of sturdy broadband military antennas for tactical applications, consisting of handheld, manpack, vehicle, base station and shipboard antennas. The line includes combined antennas for VHF/GPS, VHF/UHF/L-Band, VHF/DECT, VHF/W-LAN, UHF/GPS, UHF/DECT and UHF/W-LAN. All antennas have been through full military testing for different programmes around the globe. Comrod sectional and telescopic support masts are used worldwide in heights from 5 metres up to heavy duty 34 metres. The sectional masts can elevate headloads up to 100kg and are available with electric winch and rotator tilter units as optional extras. The telescopic mast range is available in either push up, pneumatic, winch driven or electro-mechanical models up to 24 metres with headloads up to 100kg depending on the model selected. Comrod also manufactures passive and active military antenna combining systems for both vehicle and shipboard installations. The systems are primarily designed to reduce the number of antennas on a single installation. This allows the simultaneous use of several radios to one transmit antenna, or to individual directional antennas. A receiver distribution amplifier is included to allow simultaneous reception on all receivers.

5-126_PR_2016.indd 11 07.08.2016 11:45:31


12

ANTENNAS, MARINE & CIVIL- Antennas & transmitters System groups: 411, 412 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Comrod manufactures a range of masts for civil and commercial applications. Mast configurations are available in composite sectional, composite telescopic and aluminium telescopic. Masts and accessories are in service worldwide with civil and commercial organisations for applications such as temporary mobile phone base stations, temporary lighting, elevation of optronic equipment, elevation of sensors etc.

ANTI-CORROSION AGENTS- Anti-corrosion System groups: 27, 28 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam

-hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

ANTI-CORROSION EQUIPMENT- Anti-corrosion System groups: 443 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

ANTI-CORROSION SYSTEMS- Anti-corrosion System groups: 27, 28 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling.

5-126_PR_2016.indd 12 07.08.2016 11:45:31

13


EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

ANTI-CORROSIVE AGENTS- Anti-corrosion System groups: 27, 28 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.

ANTIFOULING- Anti-corrosion System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Seaquantum Ultra S - hydrolytic Seaquantum Classic S - hydrollytic Seaquantum Plus S - hydrolytic Seaquantum Static - hydrolytic Seaquantum Pro U Seamate MSeamate NB Seaforce 30

Seaforce 60 Seaforce 90 Seaconomy 700 - hydrolytic Seaconomy 900 - hydrolytic

AQUACULTURE- Fish farming equipment SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Aquaculture

AUTOMATION SYSTEMS- Alarm equipment - Control & automation systems - Monitoring equipment System groups: 109, 381, 40, 79, 793, 795, 85, 87, 875 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no To control the system we deliver everything from simple, virtually maintenance- free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.

5-126_PR_2016.indd 13 07.08.2016 11:45:31


14

SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering.

AXIAL FANS- Fans System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes

AZIMUTH COMBI THRUSTERS- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no

AZIMUTH COMBI THRUSTERS Azimuth Combi Thrusters - a unique Brunvoll solution The Brunvoll Combined Retractable Azimuth/Tunnel Thruster is a retractable azimuth thruster that can also be used as a conventional tunnel thruster. It provides unique opportunities for innovative and flexible use of thruster functionality for different types of vessels. Technical features - Locking device to secure in stowed position - Electric motor integrated in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance

AZIMUTH THRUSTERS, RETRACTABLE- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no RETRACTABLE AZIMUTH THRUSTERS Demand is growing for Brunvoll’s Retractable Azimuth Thrusters Brunvoll Retractable Azimuth Thruster Systems have proved their reliability in challenging applications for Offshore Service Vessels, Shuttle Tankers, Coast Guard, Navy, Fishing

5-126_PR_2016.indd 14 07.08.2016 11:45:31

15


and Research Vessels. These thruster systems provide manoeuvring capabilities that extend the operational weather window of the vessel, increasing capacity, flexibility, productivity, and safety. Technical features - Locking device to secure in stowed position - Electric motor in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance - Option for complete plug-in installation

BALL VALVES- Fluid valves & other armatures System groups: 6, 7 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves

- Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

BALLAST SYSTEMS- Purification plants & fluid treatment System groups: 801 OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com The type approved Optimarin Ballast System is based on filtration as pre-treatment and high doses of UV irradiation for inactivation of marine organisms, viruses and bacteria, without affecting the normal operation of the ship. Ballast water is UV treated both during ballasting and de-ballasting to ensure the dual UV effect. Ballast water is only filtered during ballasting. The OBS is one of very few treatment options that does not use or generate chemicals or biocides in its treatment or cleaning processes. It is based on the idea that such systems should be environmentally sound, simple, flexible and easy to install, and capable of operating on both newbuilds and existing vessels.

5-126_PR_2016.indd 15 07.08.2016 11:45:31


16

The Optimarin Ballast System is easy to install on board existing ships (retrofit) as well as on newbuilds. The modulized system is very flexible, with a relatively small footprint and weight, and will fit vessels of all kinds and sizes. The OBS can be delivered as a complete skid or as a customized solution. It accommodates a wide range of ballast water capacities and can handle flows up to 3000 m3/h (or higher upon request). The Optimarin Ballast System is normally installed in the pump or engine room and in close proximity to the ballast pumps. The OBS can be delivered in a container, on a skid or in separate pieces to allow for easy installation in most any available space. The equipment can be installed horizontally, vertically, on or suspended below deck, along the ship’s side or in several separate locations. It is relatively low weight and adds no extra noise. The OBS utilizes every square meter and does not require much space, this makes it a cost-efficient solution.

BALLAST WATER TREATMENT SYSTEM- Purification plants & fluid treatment System groups: 801 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no TeamTec and Evonik Resource Efficiency GMBH have signed a cooperation agreement. Since February, 2016 TeamTec has taken over the manufacture, sales and service of the AVITALIS T BWTS. A filter and chemical injection system that ensures complete and environmentally benign BW cleaning in any temperature, salinity and turbidity.

BALLAST WATER TREATMENT SYSTEMS- Cleaning equipment System groups: 17 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Ballast Water Treatment System The Hyde Guardian BWTS offers an effective and reliable solution based on solids separation and UV irradiation. The Hyde Guardian system utilizes existing ballast pumps and piping. Standard systems are available for flow rates from 60m3/h up to 1500m3/h and customized systems up to 6000m3/h

BATTERIES- Accumulators, condensers, chargers & batteries System groups: 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no We supply a full range of batteries to all applications.

5-126_PR_2016.indd 16 07.08.2016 11:45:31

17


BATTERY BOXES- Bins, baskets, boxes and containers System groups: 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Battery containers and battery racks for all types of vessels LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no - Low weight - Maintenance-free - Self-extinguishing - Resistant to battery acid - Ventilated - Recommended by the Norwegian Maritime Directorate and Approved by Germanischer Lloyd

BATTERY CHARGERS- Accumulators, condensers, chargers & batteries System groups: 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Wide range of battery chargers and rectifiers. We can also supply custom solutions to meet most demands. Our Anda Power Solution is a ground breaking system for DC backup power for vessels.

BLOCK POSITIONING UNITS (BPU`)- Blocks & shackles System groups: 274, 344 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The TTS Block Positioning Units provide a single low cost tool for increasing throughput capacity in drydocks or on slipways. The BPU is a tool for the complete micro positioning/holding task of the double bottom block. This task is normally performed by large shipyard cranes and by using BPUs, the cranes will be free to perform other tasks, increasing the shipyards throughput capacity significally. The BPU s can be operated under a block with a minimum of 3 units. 4 units is the most frequently used setup. But even more units can be added to position larger blocks or ring units.

BOILER REPAIRING- Machinery and piping work System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Boiler repairing. PARAT has an extensive and continuously expanding global service and repair network. Through strategic partnerships we are able to serve our clients at almost any port around the

5-126_PR_2016.indd 17 07.08.2016 11:45:31


18

world on short notice. We can perform repairs, modifications and upgrades both at port and during transit. All inquiries should be directed to our head office with 24 hour service. E-mail: [email protected] We are present with representatives or branch offices in the following countries: . USA . Brazil . United Kingdom . Namibia . Korea . Portugal . China . Denmark

BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat boilers. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our

clients and customers can rely on being handed the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close.

BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3, 307, 32, 327 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Straight boom cranes Typical applications: .Hose Handling for tankers .Provision/stores cranes .Service cranes

BOW EQUIPMENT- Structural work and surface treatment (plate, welder, paint) System groups: 2 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Bow Equipment For vessels requiring bow access, TTS offers bow equipment designed to meet the demands

5-126_PR_2016.indd 18 07.08.2016 11:45:31

19


of maritime safety. A great number of vessels have been successfully equipped with bow doors of side-swinging type combined with the TTS patented Folding Frame bow ramp solution

BOW PROPELLERS- Propellers & impellers System groups: 404 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon

BRAKE EQUIPMENT- Brakes, couplings & shafts System groups: 403, 406, 432 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no REXNORD Antriebstechnik, Dortmund, Germany: Electromagnetic, hydraulic and pneumatic operated brakes. KEB Antriebstechnik, Barntrup, Germany Electromagnetic operated brakes and clutches.

BRIDGE SYSTEMS- Control & automation systems System groups: 42, 791, 875 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Automatic identification systems - AIS - Dynamic positioning - DP systems - Electronic logbooks, K-Log - Fleet Management Software - Integrated workstations - Joystick control system - Marine refit / Retrofit / Conversions - Navigator safety system - Position and reference systems - Radar and navigation systems - Ship information systems - Thruster control system - Voyage data recorders

5-126_PR_2016.indd 19 07.08.2016 11:45:32


20

BUNKER BROKERS- Administration, broking, finance & insurance services GRIEG A/S, ALEX. BIRGER 5853 Bergen Telephone: +47-55 92 28 80 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no Bunker brokers 24 hour service

BUNKER TRADERS- Administration, broking, finance & insurance servicesGRIEG A/S, ALEX. BIRGER 5853 Bergen Telephone: +47-55 92 28 80 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no Bunker traders 24 hour service

BUTTERFLY VALVES- Air & gas valves - Fluid valves & other armatures System groups: 57 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are

accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Spjeldventiler for skip, offshore og petrokjemisk industri.

5-126_PR_2016.indd 20 07.08.2016 11:45:32

21


CABIN UNITS- AC units, air dryers, air cooling and heating components System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® Marine Cabin Units and air terminals are designed for use in high speed marine air conditioning systems. Their task is to control the flow of air, its distribution and temperature. The units are tested for optimum performance. Important factors includes air throw, air induction, insulation capability and sound attenuation. We have a comprehensive range of Cabin Units. A range containing units for wall mounting or ceiling suspension, units for 1-pipe, 2 pipe, 1 pipe with reheat and a wide selection of air terminal units for low pressure systems. Air diffusers for the ceiling Cabin Units are available in square or circular shapes to fit ceiling panels. The Cabin Units is ready for easy and quick installation and may be delivered according to IMO resolution A.754 (18) for false ceilings with fire resistance rating B15. The units satisfies the Comfort Class requirements for noise, vibrations and indoor climate from Det Norske Veritas.

CABINETS- Furniture & cabinets System groups: 5, 51, 541, 548 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com

LONG LIFE SPAN: Vestnes Produkt AS workshop cabinets are specially adapted to be used on-board ships and offshore. We have developed the cabinets in cooperation with users from ships and offshore installations. This has resulted in a high-quality product with exceptionally good utility value. The use of thick electrolytically galvanized panels means the cabinets have a very long life span. The cabinets can also be produces in acid-proof stainless steel. PRACTICAL SOLUTIONS Our cabinets are made from 1.25 mm thick panels, giving a high-quality finish. The sides, back, shelves and door frames are screwed together to ensure good stability and prevent rattling. The doors on our biggest cabinets have threepoint fastenings. The doors are assembled in an all-welded frame to prevent dust from getting in. The cabinets can be delivered without doors and with open shelves, which have a front lip to prevent objects falling out. The drawer shelves have a spot-welded lining and come withdrawer stops. All our models are made of electrolytically galvanized panels, have strengthened bases and are powder coated in colour RAL 9002 (light grey) FITTING The cabinets can be delivered pre-assembled by the manufacturer or in kit-form for the customer to assemble on board. A fitter form Vestnes is also available if required. All our cabinets come with assembly instructions. There are 12 standard layouts, but the cabinets can be installed as you wish. If you require internal fittings made to measure, we are happy to help.

5-126_PR_2016.indd 21 07.08.2016 11:45:32


22

CABINETS FOR EQUIPMENT- Bins, baskets, boxes and containers System groups: 48 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra GRP Equipment Cabinets: The cabinets are used for Life Jackets, Survival Suits, Stretchers, Fire Fighting Equipment, First Aid Equipment, etc. LIGHT WEIGHT - THERMAL INSULATION - NO CORROSION

CABLE GLANDS- Power cables System groups: 88 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Cable glands Exe / Exd Tranberg’s Exe and Exdcable glands, stopping plugs, drain plugs, adaptors and reducers are provided with O-ring seal to secure ingress protection. Made ofbrass or Stainless Steel AISI 316 material. Fully compliant with the latest ATEX/IECEx standards.

CALIBRATION EQUIPMENT- Meters & indicators - Workshop equipment System groups: 442 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Calibrators Matre calibration equipment is designed for the adjustment of thermostats and pressure-switches. The intention is to meet the demands and needs by the classifying authorities regarding the calibration of sensors in unmanned engine rooms. Common to all Matre calibrators is that they are very easy to use, dependable and easily portable. Matre Calibrators have obtained great recognition and are delivered to ship and yards worldwide.

CAMERA SYSTEMS- Control & automation systems - Subsea & seismic equipment System groups: 1, 414, 481 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Underwater Camera Systems - Industrial CCTV Camera Systems - Harsh Environment CCTV Systems: - Offshore Drill Support CCTV - Commercial Vessel CCTV

5-126_PR_2016.indd 22 07.08.2016 11:45:32

23


- Other Marine CCTV - Naval Ships CCTV - Naval Submarine TV - Naval Underwater Vehicle and Diver Deployed Cameras TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Camera Systems For any operation onboard a vessel a high quality camera monitor system is an added value. Whether being used for a view of the engine, deck areas or Heli deck, a camera system will give the operator an overview of all operations in one view. With the possibility of choosing between a fixed, zoom or pan & tilt zoom camera observation; the right type of camera can be selected for any of the processes.

CANVAS PRODUCTS- Scaffolds, jigs & tarpaulins etc. System groups: 316 PLANY AS 6082 Gursken Telephone: +47 70 02 68 20 Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no Plany heavy-duty canvas .Any size or colour .Experience .Tailormade .Customized after customer needs

CARGO CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Cargo Cranes - Cylinder Luffing TTS Cargo Cranes are designed to handle a wide variety of lifting applications. The range comprises standard designs and tailor made solutions as required by the customer. The cranes are designed and built to meet all requirements from ILO as well as relevant authorities, and can be certified by any recognised Classification Society.

CARGO PUMPS- Cargo handling equipment System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com LFL* Special Cargo Pumps Engineered solutions in full compliance with APEx / IMO 673 a.s.o. OSV Cargo Pumps PG-MACS patented, proprietary Multi Applicatio Cargo Solution

5-126_PR_2016.indd 23 07.08.2016 11:45:32


24

CARGO REFRIGERATION- Cargo handling equipment System groups: 3 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Teknotherm cargo refrigeration plants can be supplied for ships carrying food for human consumption and industrial solids or liquids. Refrigeration plants for full size reefers or partly refrigerated vessels carrying frozen or chilled goods are available as two different systems. Either as direct system with evaporation of the refrigerant directly in the aircoolers, or as indirect systems by means of circulating cold brine through the aircoolers. Teknotherm refrigeration plants for cooling of low boiling point liquids on board chemical tankers or product carriers are normally designed as indirect systems. The cargo is cooled by means of circulating a cold water/glycol mixture through cooling coils located in each cargo tank.

CARGO SYSTEMS- Cargo handling equipment System groups: 3, 32 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com

- Crude Cargo Systems - Deepwell Pumps - Gas Cargo Pumps - High Temp/High Viscocity Systems - Hydraulic Power Packs - LFL Special Cargo Pumps - Liquid Mug Agitators - OSV Cargo Pumps - Tank Cleaning Machines - Acid & Toxic Cargo Handling Solution

CEILINGS- Interior floor, wall & ceiling covers System groups: 511 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.

5-126_PR_2016.indd 24 07.08.2016 11:45:32

25


CENTRAL HEATING BOILERS- Boilers, burners and incinerators System groups: 577 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat central heating boilers.

CENTRIFUGAL FANS- Fans System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution.

CHAINS- Chains, wires & ropes System groups: 431 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info

The largest stock of ship’s chains in The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations. Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D - Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles

5-126_PR_2016.indd 25 07.08.2016 11:45:32


26

CHAIRS, PILOT CHAIRS- Bridge inventory & equipment - Furniture & cabinets System groups: 541 ALU DESIGN & SERVICES AS 4636 Kristiansand Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Think future Comfort No one else combines usability, functionality and innovation with this level of comfort. Our ergonomic expertise allows us to create chairs that become a seamless extension of the user - encapsulating them in an environment tailor made to maximize performance and minimize fatigue. Total control through absolute comfort.

CHECK VALVES- Air & gas valves - Fluid valves & other armatures System groups: 309, 513 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also

accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

COATINGS- Coatings & paint System groups: 443 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.

5-126_PR_2016.indd 26 07.08.2016 11:45:32

27


COMMUNICATION- Radio & telephone communication System groups: 412, 42, 421, 423 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex The Maritime Broadband Radio (MBR) is developed for use in maritime applications where digital high-speed reliable communication and data transfer are crucial for efficient and safe operations. MBR operates in the 5 GHz frequency band and has proven high capacity communication over distances in excess of 50 kilometres. Operating as a maritime “information highway”, the MBR connects crews and their vessels with a high-speed and high capacity digital communication channel with “fast track” priority options. The system can securely carry a diverse array of op¬erational information, from real-time video to system data, and remotely situated teams can work together seamlessly, co-or¬dinating systems and activities for optimal performance, safety and operational success.

COMPOSITE PRODUCTS- Additives & agents System groups: 196 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no These are custom-designed products for commercial and defence applications. Structural composites can be divided into the following product categories:

COMPRESSORS- Compressors System groups: 73 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Sundstrand International Corporation S.A, Belgium Centrifugal compressors and blowing machines. TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Refrigeration compressors from: Mycom, Japan Grasso, The Netherlands York, United Kingdom/USA Carrier, USA Bock, Germany Hall, England RefComp, Italy Service.

5-126_PR_2016.indd 27 07.08.2016 11:45:32


28

CONDENSERS- Evaporators, condensers and receivers TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Large assortment in refrigeration condensers Service.

CONTAINERS- Bins, baskets, boxes and containers System groups: 315, 317 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Our AERON® container’s can be delivered both for marine and offshore applications. These can be delivered fully insulated and with necessary light, ventilation, cooling and heating. You only need to supply electricity and necessary water and ventilation ducts. We may deliver containers for storage of special equipment in ATEX or non ATEX, and containers with complete HVAC-R systems for accommodation or technical rooms. The systems may be designed according to customers’ requirements and all will be delivered in accordance with relevant rules and regulations. Typical applications: . Storage of lithium battery packages in ATEX with necessary HVAC

. Storage of painting equipment in ATEX with necessary HVAC. . Container with complete HVAC Systems for accommodation . Container for cooling of Instrumentroom or Technical rooms . Container with complete provision room cooling system . Containers for temporary refuges with necessary equipment. . Other tailor made solutions in ATEX or non ATEX. Examples of AERON® HVAC container. . Containers with Mist Eliminator louvers, Air Handling Units, fans etc. . Refrigeration machinery with air-cooled or water cooled condensers. . Cooling system with necessary heat exchangers, integrated pumps. . Complete solutions with integrated PLC automation & control system. LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Plast AS have many different GRP containers. Click on the usage area thats closes to your requirement. Libra GRP Battery Containers: Libra supplies between 500 and 1000 battery containers per year for the marine industry. Type Approved by GL. LIGHT WEIGHT - NO CORROSION Libra GRP Containers: Libra produces GRP Containers for multiple purposes for the offshore industry. They are mainly used to store MOB and Emergency Equipment on deck.

5-126_PR_2016.indd 28 07.08.2016 11:45:32

29


You can find the following examples of a MOB Equipment Storage Cabinet Libra GRP Life Jacket Containers: Libra supplies Life Jacket Containers for the marine industry. Typical customers are Ferries, Passenger Vessels and Cruise Vessels. LIGHT WEIGHT - NO CORROSION

CONTROL AND MONITORING SYSTEMS- Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381, 40, 79, 793, 795, 85, 87, 875 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7

CONTROL LEVERS- Regulators & switches System groups: 791 LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no Norways largest manufacturer of Control Levers. Supplier to leading system manufacturers all over the world. -Control lever: Type LF 50, Joystick -Control lever: Type LF 60, Joystick -Control lever: Type LF 70, to operate azimuth propellers -Control lever: Type LF 80, Rudder control -Control lever: Type LF 90, to operate propulsion and thrusters -Control lever: Type LF 120, for maoeuvering of propulsion and thruster unit -Control lever: LF 150, steering wheel -Control lever: Type LF 180, for manueuvering of propulsion units - simple, one-axis control levers in different sizes, hand wheels, rudder controls, azimuth control units and multi-axis joysticks

CONTROL STATIONS- Control & automation systems System groups: 196 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com

5-126_PR_2016.indd 29 07.08.2016 11:45:32


30

Control Stations Tranberg control stations with various numbers and types of pushbuttons, lamps etc.enableflexible sizes and solutions. Only using Stainless Steel AISI 316 and fully compliant with the latest ATEX/IECEx and NORSOK standards.

CONTROL SYSTEM- Control & automation systems OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com The Ballast Control System allows easy operation of the Optimarin Ballast System.User-friendly interface. - Touch screen operation. - Interface with ship’s main systems. - Logging in accordance with IMO requirements. - Option of integrating ballast pumps and valves.

CONTROL SYSTEMS- Control & automation systems System groups: 109 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no To control the system we deliver everything from simple, virtually maintenance- free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems,

valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.

CONTROL VALVES- Air & gas valves - Fluid valves & other armatures System groups: 442, 6, 7 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve

5-126_PR_2016.indd 30 07.08.2016 11:45:32

31


- Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

CONVERTERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 42, 867 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Wide range of DC/AC and DC/DC converters to meet any demand.

COOLING SYSTEMS- AC units, air dryers, air cooling and heating components System groups: 362, 554 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Broadly assortment to freezing systems for merchant fleet and fishing fleet. For the merchant fleet we deliver cooling- and freezing systems for: Solid and liquid cargo, provisions, aircondition, inert gas and CO2. For the fishing fleet we deliver freezing systems for cargo, RSW and various freezing equipment. Service.

COOLING WATER TREATMENT- Cooling components for fluids - Purification plants & fluid treatment System groups: 722 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

CRANES- Cranes, crane equipment, lifting devices & booms System groups: 33, 45 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Cranes by PALFINGER MARINE are designed to meet the safety standards and extreme environmental conditions of the marine and offshore industry. PALFINGER MARINE and PALFINGER DREGGEN offer a comprehensive product range of knuckle boom, stiff boom and telescopic boom cranes as well as wire luffing and travelling cranes for various applications within the shipbuilding and the oil and gas industry worldwide.

5-126_PR_2016.indd 31 07.08.2016 11:45:32


32

CRUDE CARGO SYSTEMS- Cargo handling equipment System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Crude Cargo Systems Electric, hydraulic, or steam turbine driven cargo solutions for tonnage up to ULCC\’s

DAMPERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 109 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies.

DAUGHTER CRAFTS- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe has a wide range of daughter craft designed to operate away from the mother ship or offshore installations for extended periods of time. The primary function is to search for and rescue persons lost at sea. Effective search and recovery require a fast rescue craft with excellent reliability, manoeuvreability and sea keeping abilities. Combining these functions, Norsafe boats are suitable for all types of marine SAR missions. The daughter craft are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. We have daughter craft which fully comply according to current IMO requirements and all equipment has been approved in accordance with latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice.

5-126_PR_2016.indd 32 07.08.2016 11:45:32

33


DAVITS- Davits and masts System groups: 501, 502 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Harding’s unique Totally Enclosed Davit concept has established a new standard when it comes to safety, cost of installation and savings on mainetnance cost. The integration of highly efficient electrical and hydraulic systems into the davit structure provides optimal protection against wear and tear. The Total Enclosed Davit’s is intended for long term, reliable operation in harsh and hazardous marine and offshore environment. Then enclosed design also makes a perfect fit for operation under arctic climate conditions. Our davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98 on Marine Equipment (MED). The carefully considered and epoch-making design of our NPD system is an advantage when it comes to maintenance and service, installation and deck preparations and for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch Ship Davits: Harding NPD series davits are specifically designed for safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments

Rig Davits Harding NRD-series davits are specifically designed for the safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments. The davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98 on Marine Equipment (MED). Its carefully considered and epoch-making design, is an advantage when it comes to maintenance and service, installation and deck preparations, and also for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch. Our FAD davit system is ideal if you need flexible hook distance. The fixed arms can be situated on deck according to your applicable hook distance. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Davits suitable for all MP craft can be offered in package with the craft. In co-operation with major davit manufacturers, Maritime Partner can deliver davits or cranes specially designed for all MP-craft. An optimal solution to fit on any vessel can be tailor made. Both for newbuildings or retrofitted to existing vessels.

5-126_PR_2016.indd 33 07.08.2016 11:45:32


34

NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Lifeboat davits: - A-frame cantilever davits for marine and offshore. Life boats - “A Series” - Cantilever davits for platform installations and similar. Life boats - “C Series” - Cantilever davits for platform installations and similar. Life boats - “D Series” - Single pivot gravity davits for ships and similar. Life boats - “E Series” - Low build luffing davits for restricted height installation. Life boats - “LH Series” Rescue boat davits: - A-frame luffing davits for rescue & fast rescue boats - “NDA Series” - Cantilever davits for rescue & fast rescue boats - “NDC Series” Combi davits for rescue boats/ liferafts: - Slewing davits for life rafts and rescue boats - “NDSC Series” Free fall boat davits: - Free fall boat davits for ships and offshore installations. Lifeboats - “HD” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “H” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “SW” Series SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Davits

DECK MACHINERY- Cranes, crane equipment, lifting devices & booms System groups: 274 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PGH 10T Tugger Winch PGH 10T Capstan PGH 10T PSV Cargo Handling hydraulically driven Capstan PGH Cargo Securing Winch PGH Hydraulically driven PSV Cargo Securing Winch

DECK RAILS- Bridge inventory & equipment - Furniture & cabinets System groups: 541 ALU DESIGN & SERVICES AS 4636 KristiansandTelephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Certified excellence Alu Design invests in a comprehensive programme of testing and certification. It is our aim to demonstrate that every one of our products is built with care, precision and quality, complying with the market’s most exacting standards. When you sit in an Alu Design chair you can relax, safe in the knowledge that there is simply no better seat.

5-126_PR_2016.indd 34 07.08.2016 11:45:32

35


DECK SELFSMOOTHING SCREED- Interior floor, wall & ceiling covers - Sections, foundations, pillars, structural units and bulkheads System groups: 524 SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound

DECK SYSTEMS- Cranes, crane equipment, lifting devices & booms System groups: 3, 32 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Streamer Handling System - Gun handling systems - Wide Tow Handling System - Back-deck control system - Additional seismic products - Bulk Hose Securing Unit - BHSU - eBird - Seismic cable control - Flush Manhole covers - RoJo Quick Hatch - Helideck Monitoring System - HMS 100 - Launch and Recovery System - LARS for AUV and ROV - Marine cranes - Movable Deck Extender

DEEPWELL PUMPS- Pumps & pump units System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PG-SLB 125 Low Share Twin-screw Deepwell Pumps All stainless steel / duplex steel chemical cargo-handling pumps, based on twin-screw pump technology.

5-126_PR_2016.indd 35 07.08.2016 11:45:32


36

Positive displacement, low share, and vertially pulsation free performance with capacities up to 100m3/h and 9.0 BarG NOFO 2005-conform, hydraulically driven, ex-proof execution

DEHUMIDIFIERS- Air and gas treatment (dehydrators, air separators) System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no High relative humidity increases the risk of corrosion, mildew, rot and problems in electronics. Humidity reduction and control has proved to be the best and most cost efficient remedy against such damage. Alfsen og Gunderson AS has since 1965 presented leading solutions based on dry air technology and humidity control. - Tank drying equipment for chemical tankers. - Cargo hold dehumidifiers - AG Air Dryer for blasting and planting. - Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2

DIAPHRAGM VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

5-126_PR_2016.indd 36 07.08.2016 11:45:32

37


DOCKING SUPPORT ARMS- Repairs, modifications & docking System groups: 144 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com TTS Docking support arms can be incorporated into the TTS Transfer System, or be delivered as individual units to be placed, for example, in a drydock. The docking support arms consists of a basic cradle design with a keel blocks and hydraulically operated tilting arms. The tilting arms have wooden bilge blocks gimbaling at the end. This support conforms to the shape of the hull. During docking, the tilting arms rise and press on to the hull with a minor force of one metric tons, while they resist the force of 50 metric tons. When the ship is dry, the arm is secured with a bolt. The TTS Docking Support arms are operated from a mobile hydraulic power pack. .TTS Docking Suppport Arms can significantly increase your docking capacity by increasing the docking productivity .The systems saves human power and gives the ship an exact docking position

DOCKLIFT- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com

Building ring units or blocks weighing some 1,200-2,000 tonnes, instead of blocks weighing 2-400 tonnes, will significantly reduce the building time in dock. The docklift concept is based on assembling 2-400 tonnes blocks into ring units weighing up to 2,000 tonnes.

DONKEY BOILERS- Boilers, burners and incinerators System groups: 644 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat auxiliary boilers and exhaust boilers.

DOORS- Interior doors & windows - Watertight/weathertight doors & windows System groups: 51 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Watertight doors. Weathertight doors. Watertight and weathertight in A0 and A60. Spraytight bulkhead doors, insulated. Hatches, flush/raised VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com

5-126_PR_2016.indd 37 07.08.2016 11:45:32


38

TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.

DOORS, LIGHTWEIGHT- Watertight/weathertight doors & windows System groups: 513, 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Accommodation Composite Doors (AC): Lightweight, non-combustible interior doors for High-Speed and Light Craft Vessels. EXTREMELY LIGHTWEIGHT - EASY TO INSTALL - GOOD DESIGN Libra Lightweight Sandwich Doors (HSC): Libra Lightweight Doors (HSC) have been designed to comply with the HSC code (High-Speed and Light Craft regulations). In addition, these doors are ideal for Ferries, Cruise Vessels, Marine Vessels, Yachts, etc.

DOORS, SPRAYTIGHT- Watertight/weathertight doors & windows System groups: 513, 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Spraytight GRP Doors (ISD): Libra Spraytight Doors (ISD) are made from Glassfiber Reinforced Polyester (GRP) composite. The weight of the GRP Doors is only 1/3 of steel doors and the sandwich construction gives them excellent thermal insulation. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. .Steel or Aluminium coamings .Single dogs or Quick Acting .Delivered with either 30mm or 100mm corner radius Libra Spraytight Steel Doors and Hatches (SR): Libra Spraytight Doors (SR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. Libra Spraytight Aluminium Doors and Hatches (SR) Libra Spraytight Doors (SR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck.

5-126_PR_2016.indd 38 07.08.2016 11:45:33

39


DOORS, WATERTIGHT- Watertight/weathertight doors & windows System groups: 513, 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Watertight Steel Doors and Hatches: Libra Watertight Steel Doors have DNV type approval certificate and comply with International Load Line Convention 1966 DNV-OS-C301, the Norwegian Veritas’ rules for Classification of Mobile Offshore Units. Libra Watertight Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate water plane according to damage stability calculations. Libra Watertight Steel Doors may also be used in connection with SOLAS Chapter II-1 Part B Regulation 20-2.2, and the Stockholm Agreement. Libra Watertight Steel Doors may also be used below bulkhead deck in positions where a hinged door is acceptable, and where the actual water pressure is 50kN/m2 or less. Libra Watertight Aluminium Doors and Hatches: Libra produces Watertight Aluminium Doors on request. These doors will be made in accordance with the requirements set by Classification Societies.

Libra A-60 Fire-rated Watertight Steel Doors and Hatches: Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Watertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations/Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Watertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. Libra Watertight A-60 Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate waterline according to damage stability calculations. The Libra Watertight A-60 Steel Doors may also be used on cargo vessels (SOLAS Chapter II-1 Part B-1 Regulation 25.9) above equilibrium or intermediate waterline according to damage stability calculations, and these doors can also be used in connection with SOLAS II-1/20-2.2 and the Stockholm Agreement. Libra Watertight A-60 Steel Doors may be used below bulkhead deck in positions where a hinged door is acceptable and where the actual water pressure is not greater than the design pressure given by DNV.

5-126_PR_2016.indd 39 07.08.2016 11:45:33


40

DOORS, WEATHERTIGHT- Watertight/weathertight doors & windows System groups: 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Weathertight GRP Doors (WTD): Libra Weathertight Composite Doors and Hatches are built in compliance with the International Load Line Conventions and are Type Approved by most Classification Societies. LIGHT WEIGHT - EXCELLENT THERMAL INSULATION - NO CORROSION. Libra Weathertight Steel Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as external bulkhead doors on weather deck (positions 1 and 2), where sill height of 380 / 600mm is required. Both standard and custom sizes are available. Libra Weathertight Aluminium Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as

external bulkhead doors on weather deck (position 1 and 2), where sill height of 380 / 600 mm is required. Libra A-60 Fire-rated Weathertight Steel Doors and Hatches: Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Weathertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations / Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Weathertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. The Libra Weathertight A-60 Steel Doors may be used in access openings according to DNV Ship Rules Part 3 Chapter 3 Section 6 and the International Convention on Load Lines Chapter II Regulation 12

DRINKING WATER FILTERS- Fluid filters - Freshwater generation System groups: 584 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com

5-126_PR_2016.indd 40 07.08.2016 11:45:33

41


Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.

DRINKING WATER TREATMENT- Freshwater generation System groups: 584 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no AG possesses all technologies for treatment of drinking water and process fluids. That includes UV-sterilizers, simplex- and duplex basket filters, automatic backwash filters and mediafilters with fine ceramic media or activated carbon. ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling.

EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.

DROPPED OBJECT PROTECTION- Aluminium MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no On the topsides, the Dropped Object Protections are used for protecting decks or equipment. The Protections can be made in small panels or large protective decks and are used where swinging objects may be lifted above critical equipment. The panels can be designed to withstand the load from falling objects like drill collars, containers etc.

5-126_PR_2016.indd 41 07.08.2016 11:45:33


42

DUAL WALKING BEAM (DWB)- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The Dual Walking Beam (DWB) units are individual working machines, completely self-contained. They are simultaneously or individually controlled by one operator with a portable hand held control station. .A trackless Transfer System for Ship Sections .Smaller Ships and Heavy Loads .Load range: 200 tonnes up to 12.000 tonnes

EJECTORS- Ejectors - Maintenance, spare parts and supplies System groups: 356 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Ejectors E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Stripping Ejectors - reliable and indispensable jet pumps. TeamTec has more than 50 years experience with production of stripping ejectors, and has supplied over 75 000 units worldwide. The stripping ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. TeamTec Stripping Ejectors are superior for all-purpose stripping and have become

an important part of the standard equipment on modern new buildings. The main areas of application for the TeamTec Stripping Ejectors are stripping of cargo tanks, ballast water tanks, cargo holds, engine rooms and bilge, vacuum cleaning engine rooms, as well as emergency stripping. With a combination of high quality material and skillful construction TeamTec supplies effective solutions to meet onboard requirements. Other TeamTec ejector types and products related to specific purposes: i.e. mud mixing, degassing, vacuuming and evacuation of air, gas. TeamTec’s design and production of ejector types is flexible in accordance with the customer’s requests. The TeamTec Stripping Ejectors are produced in Ni-Al-Bz, stainless steel and super duplex.

ELECTRIC MOTORS- Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 867, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional

5-126_PR_2016.indd 42 07.08.2016 11:45:33

43


advantages include the reliable bearing design as well as rotors with aluminum die-cast cage for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs.

ELECTRICAL ANTI-ICE/DE-ICE- Electrical and electro work System groups: 88 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com As the world market leader we provide tailor made solutions certified by DNV-GL. Delivered to more than 60 projects worldwide.

ELECTRICAL CIRCULATION STEAM BOILERS- Boilers, burners and incinerators System groups: 577, 641, 841 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no ECS - ELECTRICAL CIRCULATION STEAM BOILERS

The PARAT Electrical circulation steam boiler was designed to meet the request for a modular and easy to install alternative to MGO fuel for auxiliary boilers on existing vessels in operation. By integrating the ECS in your boiler you have the option to maintain your steam pressure from an electrical power source (shore power, spare generator power etc.). The unit can be installed on any kind of existing steam boiler system and is also a good solution for newbuilds where increased fuel flexibility for the steam system is required. The electrical cabinet is not directly connected to the boiler unit. This ensures a low temperature in the electrical components. The cabinet is standardized, and type approved according to the NEK 400. Included are fuses, contactors and complete safety system. As an option the unit can be delivered with a main power switch. The boiler unit is designed for vertical or horizontal installation depending on the layout and space availability around the main auxiliary boiler. Inlet and outlet connections to main boiler will be done on site. The ECS can be delivered as a standard modular unit in capacities up to 400kW, which is equivalent to 600kg steam per hour. Larger capacities can be provided upon request. ELECTRICAL STEAM BOILERS The Parat Electrical element boiler can be delivered with capacity up to 5000 kW. With our 40 years of experience in marine boilers PARAT has landed on a rugged design that fulfills all class requirements. The electrical element boiler is very compact, and one of the greatest advantages with this product is the possibility of low load regulation, down to 15 kW. No smoke stack is needed, thus saving space and costs. The electrical cabinet is not directly connected to the boiler. This ensures a low temperature in the electrical components. The cabinet is

5-126_PR_2016.indd 43 07.08.2016 11:45:33


44

standardized, and type approved according to NEK 400. Included in the cabinet is the main switch, fuses, contactors and a complete safety and control system. This system is based on a Siemens PLC SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible, via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system. For vessels with ORO operation class, Parat has developed a successful package containing a heat exchanger for the hot water system and steam lances for heating of the ORO tanks. The patended Parat MEL-C was developed to meet the demand for a compact and flexible system that allows the operator to use one boiler system for both steam and hot water production. In normal operation the boiler generates hot water at an operating temperature of 90oC. When there is a requirement for steam production the water level in the boiler is reduced to provide a sufficient steam separation area. Hot water production is maintained separately by an electric heater in a bypass circuit. The MEL-DC was developed to enable connection to direct current power supply. It is based on our standard MEL low Voltage boiler but with specialized immersion heaters and control panel.

ELECTRICAL INSTALLATION EQUIPMENT- Electrical and electro work System groups: 85, 87, 88 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Installation Equipment Tranberg’s installation equipment is made to reduce installation and maintenance costs for yard andship-owner. Using only cast brass and stainless steel, manufactured to the highest standards.

ELECTRO BOILERS- Boilers, burners and incinerators System groups: 644 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Electrical boilers With decades of experience with various electrical steam and hot water boilers for land based industry PARAT is in a unique position to provide boilers for vessels with modern and often ground breaking propulsion and power generation systems.

5-126_PR_2016.indd 44 07.08.2016 11:45:33

45


Zero emissions, small footprints and simple installation and operation make our electrical boilers the perfect solution for steam and heat generation aboard the futures most energy efficient vessels. The following pages give a brief introduction to our electrical boiler range.

EMERGENCY MEDICINE CARE- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no A medical quality assurance tool coupled with telemedicine: ShipMed® Safety System ensures simple and safe operation of the ship’s hospital. The medical quality assurance tool lays the foundation for securing life and health on board and has been developed by medical personnel with long experience in ship medicine, in close cooperation with the maritime business, and according to Norwegian and International standards and regulations. ShipMed® Safety System assures the hospital stores and provides a full overview of the stock, expiry dates, distribution and purchase of medicines and medical equipment, as well as reports for stock, consumption and purchase. The software also provides a guide to use of medicines and medical equipment, a quick reference for medical equipment for different injuries and video clips showing various medical procedures.

The quality assurance tool is available in Norwegian, English and Portuguese, and covers lists of ships medicine for a wide variety of flag states. Telemedical solution: ShipMed® Safety System offers an option for telemedical solutions on board ships through ShipMed® Premium membership. The solution is coupled to the quality assurance tool, and increases the likelihood of reaching a diagnosis and administering treatment quickly. It allows for contact between vessels and doctor on shore with moving images and sound, as well as transfer of medical data such as ECG, pictures and text. In that way, illness, pains and visible injuries can be properly described and communicated, and correct treatment or evacuation can start quickly

ENCLOSURE SYSTEMS- Control & automation systems System groups: 41 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Tranberg develops, manufactures and distributes: ENCLOSURE SYSTEMS Junction boxes/Instrument enclosures Cable glands Panel building Switches & Distribution systems

5-126_PR_2016.indd 45 07.08.2016 11:45:33


46

ENGINE ROOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 4 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Overhead travelling bridge design, capacity of up to SWL 40 t - Handling of provision and machinery parts below deck level - Two main designs: standard headroom mono-beam design and ultra-low headroom dual-beam design - Electric, pneumatic or hydraulic power supply

ENGINE ROOM PUMPS- Pumps & pump units System groups: 6 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Engine Room Pumps

ENGINE ROOM SYSTEMS- Control & automation systems System groups: 79, 791 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Electronic logbooks, K-Log - Engine monitoring systems - Fleet Management Software - Marine automation systems - Marine refit / Retrofit / Conversions - Marine switchboards - Process control systems, K-Pro - Propulsion control systems - Safety system, K-Safe - Ship information systems

EQUIPMENT CABINETS- Furniture & cabinets LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no The Libra equipment cabinet is available in many standard sizes and we also supply sizes in accordance with the customer’s requirements. Shelf arrangement (vertical or horizontal), heating, lighting, etc., are supplied in accordance with requirements and adjusted in each individual case.

5-126_PR_2016.indd 46 07.08.2016 11:45:33

47


Main features: - Material: Fire retardant GRP - Low weight - Minimal maintenance - Central Closing Device - Corrosion- free - Layout/arrangement in accordance with requirements - Standard sizes + customized sizes on request - Double doors or roller front arrangement. - Standard colours: white, red or green - Side-by-side door arrangement or alternatively roller shutter

EXHAUST BOILERS- Boilers, burners and incinerators System groups: 646 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat exhaust boilers for hot water and steam. Utilizing the waste heat from engines and generators is a good way to save fuel and space and at the same time reduce harmful emissions to the atmosphere . Parat specializes in custom designed boilers and economizers for any vessel and engine type with the focus on providing the user with the most compact and efficient solution available. Since the worlds first composite boiler left our factory in 1972, we have continued innovating and are able to supply any standard or custom made heat recovery solution for all kinds of engines or generators. The following pages

give a brief overview of our products under the category exhaust gas boilers. EXHAUST GAS SMOKE TUBE BOILER The smoke tubes pass through the boiler and the exhaust gas flows inside the tubes. This construction makes the boiler suitable for connection to more than one engine with separate exhaust gas sections in one boiler. The boiler can either work with forced circulation with evaporation in a separate steam drum or as a natural circulating boiler with a built-in steam drum at the top. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boiler is pre-assembled and delivered as a complete unit. EXHAUST GAS WATER TUBE BOILER The water tube boiler consists of finned tube or bare tube bundles mounted together in sections. The water circulates through the tubes and the extended heating surface on the exhaust gas side makes this boiler compact. The water flow is generated by circulation pumps and evaporation takes place in the boiler. The water/steam mixture is then separated in a steam drum or in an auxiliary boiler. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boilers are pre-assembled and delivered as a complete unit. Needs proper water treatment and cleaning. SMOKE TUBE / EXHAUST GAS BOILER The boiler is of vertical design with smoke tubes through the boiler and steam evaporation at the upper section. The boiler is constructed from drawings approved by all classification societies and delivered with equipment in accordance with class requirements. The combination of both an oil fired section and

5-126_PR_2016.indd 47 07.08.2016 11:45:33


48

exhaust gas section in the same boiler leads to a simpler and more economical steam system on board. A two in one system is less expensive to install than two separate boilers. A combined system is easy to service and maintain, thus providing cost savings during the lifetime of the ship. Capacity of the exhaust gas section will depend on the exhaust gas quantity and temperature. The principle of the boiler is based on a common water and steam space and separate sections for oil firing and exhaust gas. If several engines are utilized, the boiler can be delivered with several separate exhaust gas sections. The boiler comprises smoke tubes both for the oil fired and the exhaust gas section. From the top of the boiler there is good access to the tubes which make service and maintenance easy. A main feature of the boiler is its automatic mode. When this mode is activated, the exhaust gas section becomes the main heating source. If the capacity is too small and the steam pressure drops, the oil burner automatically ensures correct pressure. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. Operation of the boiler control panel is done from the local touch screen. Boiler PLC can be connected to the main control system by standard ethernet/profibus/modbus communication.

EXTERNAL SIDE DOORS- Watertight/weathertight doors & windows System groups: 514 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com External side doors Offshore vessels are often built to comply with specific customer demands and are therefore tailor-made. TTS Ships Equipment offers a variety of equipment configurations to help meet these needs. The purpose of an offshore ROV (Remote Operated Vehicle) side door is mainly to deploy and retrieve subsea vehicles. The door must be designed to withstand operation in heavy seas and rough weather. TTS Ships Equipment delivers a number of different door configurations, all designed for operational flexibility, reliability and watertightness. .Top hinged .Side hinged .Bottom hinged .Sliding .Roller gate .Railing door .External Door/platform

5-126_PR_2016.indd 48 07.08.2016 11:45:33

49


FAIRLEAD SHACKLES- Blocks & shackles System groups: 274, 32 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Mandal Fairlead Shackle - Stainless steel mooring shackle with sleek shape designed to pass through fairleads. Available in two sizes 90 M and 120 M.

FANS- Fans System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no We are offering all types of fans needed to create an optimal ventilation system for marine and offshore applications. With requisite certificates according to class and governmental requirements. Axial Fans Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes at relative small pressure drops. Explosion- Proof Fans for Hazardous Area Hazardous areas onboard offshore rigs, chemical tankers, oil tankers and gas carriers, have very stringent requirements

with regard to design and execution of the ventilation fans, concerning safety. We offer a wide range of special fans for installation in hazardous areas. Centrifugal Fans Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution. Dampers and Fire-dampers We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies. Silencers We deliver any type of square and circular high efficiency silencers.

FEEDWATERTANK / DEGASSER- Heat exchangers & steam generation System groups: 648 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat IMR/IMT Feedwatertank / Degasser

5-126_PR_2016.indd 49 07.08.2016 11:45:33


50

FENDER DAVITS- Davits and masts System groups: 501 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Fender Davits: TTS Marine AS is a supplier of dual point davits for fenders. TTS is specialized in creating solutions to meet your requirements. We are able to offer davit and Yokohoma fender as a complete package

FILTERS- Fluid filters System groups: 584, 6 OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com Optimarin offers three different 40 micron filters: FilterSafe basket type, B&K candle type, and Filtrex basket type filter. All three filter types have automatic back flushing and are self-cleaning. Removes large particles and organisms. Low pressure loss of only 0.1 - 0.5 BAR. Horizontal or vertical installation. Bypassed during de-ballasting.

FIRE FIGHTING SYSTEMS- Firefighting equipment System groups: 376, 505, 57, 81, 813 WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no A Norwegian based company, developing and producing all types of active fire fighting systems. WME also carries out research and development of Water Mist Nozzles and systems. WME performs: . Site study . Design . Engineering . Fabrication . Testing . Installation . Commissioning/Start-up Our working areas cover Oil & Gas, Petrochemical, Offshore & Marine Industry as well as Air Craft Hangars and Building market. Our commitment to excellence is based on a deep and wide experience in both Fire Engineering and Water Mist Technology. Our well-trained staff have backgrounds in the North Sea Offshore area. Among our staff you will find Fire Cybernetics and Machine Engineers. When you purchase WME products you are buying the finest fire fighting equipment possible. Our well-trained and experienced project staff will execute your order in the most professional way.

5-126_PR_2016.indd 50 07.08.2016 11:45:33

51


FIRE FIGHTING SYSTEMS DIFFS / NUI- Firefighting equipment System groups: 819 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Deck Integrated Fire Fighting System (DIFFS) Matre Deck Integrated Fire Fighting System (DIFFS) - specially developed to extinguish fire on helidecks. An activated DIFFS system will extinguish a major spill fire on the helideck within 15 seconds. Although - tests have shown that such fires in most cases are extinguished in less than 10 seconds. Matre DIFFS can be automatically activated by detection system or manually by release panels (push buttons). Rescue personnel can safely perform rescue operations on the helideck even when the system is fully activated. Matre DIFFS can be used on many various installations and can be customized according to customer specifications. Today Matre DIFFS is used on various offshore installations as well as yachts and roof top helidecks. DIFFS consist of foam mixing skid and Matre pop-up nozzles. Matre DIFFS is designed in compliance to all applicable standards and regulations (CAP437, NORMAM27, ICAO, NMD, NORSOK). Matre Systems for Normally Unattended Installations: Normally Unattended Installations (NUI) can

now be equipped with Matre’s Deck Integrated Fire Fighting System (DIFFS) or Ring Main System (RMS). Today NUI present their own problems when helicopters have to land on installations with only rudimentary firefighting equipment. This is set to change as the CAA (Civil Aviation Authority) now demands better safety for helicopter movements on NUI. CAP 437, Standard for Offshore Helicopter Landing Areas, states the following in chapter 5.3 appendix D that: “DIFFS on NUIs should be integrated with platform safety systems such that pop-up nozzles are activated automatically in the event of an impact of a helicopter on the helideck where a Post-Crash Fire (PCF) is a foreseeable outcome. The overall design of a DIFFS should incorporate a method of fire detection and be configured to avoid spurious activation. It should be capable of manual over-ride by the HLO and from the mother installation or from an onshore control room. Similar to a DIFFS provided for a Permanently Attended Installation (PAI) or vessel, a DIFFS provided on an NUI needs to consider the eventuality that one or more nozzles may be rendered ineffective by, for example, a crash. The basic performance assumptions stated in paragraphs 2.10 to 2.12 should also apply for a DIFFS located on an NUI.”

FIRE VALVES- Air & gas valves - Firefighting equipment System groups: 57 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se

5-126_PR_2016.indd 51 07.08.2016 11:45:33


52

Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

FIRE-FIGHTING EQUIPMENT PROPORTIONERS- Firefighting equipment System groups: 505 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Foam Proportioning Equipment Matre has since the late eighties delivered specially designed foam proportioner for use on industrial, marine and offshore installations. Product development and a strong focus on safety and accuracy has led to our range of products. These are often preferred in projects where flexibility and quality are crucial for the result. The reliability of the foam proportioning system is essential in order to guarantee an effective operation. Matre offers a wide range of proportioner models and sizes. We strive to be able to deliver and meet our customer’s challenges with proven equipment and solutions. Our desire as a complete supplier of foam proportioner is to be in front with new development and to ensure that we at all times can deliver reliable, cost effective solutions to the industry. We aim to keep our position as a leading supplier of high quality foam proportioning equipment. Data Sheets: Please follow the link: http://www.matre.no/products

5-126_PR_2016.indd 52 07.08.2016 11:45:33

53


FIRST AID EQUIPMENT- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.

FLEXIBARRIER- Cargo handling equipment MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no FlexiBarrier is a product developed to cope with the rough handling of goods and containers offshore. Adjacent railing and protection systems in lay-down areas can often be damaged, causing work delays and safety problems.

FLEXIBLE ENGINE MOUNTS- Other engine & propulsion equipment System groups: 196 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Flexible engine mounts. Vibration, noise and shock control.

FLOOR COVERING- Interior floor, wall & ceiling covers VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com

5-126_PR_2016.indd 53 07.08.2016 11:45:33


54

Vestnes Ocean is the exclusive agent of STREAMO marine flooring range from Gerflor for the Norwegian maritime market. Gerflor creates, manufactures and markets innovative, design-led and eco-responsible solutions for flooring and complementary interior finishes. Gerflor is specifically developing new ranges for the maritime industry and has also certificates to deliver for both ships and offshore installations. Together with Vestnes Ocean`s Willy furniture, STREAMO floorings create a tasteful combination of colours and give an exclusive impression. Gerflor was actually the company that invented the homogeneous floorings in 1937. After this it has been a continuous development of new products and designs. STREAMO collection for maritime market also offers a complete solutions of handrails, pvc skirtings and pvc stair nosings. The floor convering offer consists of wooden imitation range called Streamo Karavel, and homogeneous PVC floorings called Streamo Cruiser, Seacrosser, Mariner and Steamer. For more information about the STREAMO products, visit www.streamobygerflor.com

FREE FALL LIFEBOATS- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com

Norsafe Free-fall lifeboats (GES - Gravity Escape System) have an optimal design and a large number of ships and offshore installations are equipped with our free-fall lifeboats. The benefits are clear: rapid evacuation in emergencies, the boat slides out from a ramp onboard the ship/installation, and hits the water well away from the ship or installation with a high vertical forward motion. Passengers are safe and secure in an enclosed cabin, securely fastened to anatomically shaped seats. The lifeboat system is robust and can withstand high winds, powerful waves and extreme weather conditions. The boats can be fitted with a water spray and compressed air system for protection against fire. Advantages with freefall-system: - Maximum distance from installation - Position to water entry point - Positive forward motion after water entry - Good guidance during initial phase of drop giving stability during free fall phase - Well-proven system designed for large heel/trim angles - Robust system against heavy wind and waves from any direction Our largest boats can withstand drops from great heights up to 47m and are highly space efficient. We supply davits specially designed for our free-fall lifeboats and can adapt davits to suit all onboard conditions. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC-labeled in accordance with the Marine Equipment Directive. Our lifeboat systems also meet the new DNV-OS-E406 standard for Norwegian waters as required from 2015. Typical specifications - are subject to revision according to customer requirements. All products are subject to continuous review. Norsafe AS reserves the right to change specifications without prior notice.

5-126_PR_2016.indd 54 07.08.2016 11:45:33

55


FREEZING SYSTEMS- AC units, air dryers, air cooling and heating components System groups: 57 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Freezing Systems Teknotherm has for years been a leading supplier of refrigeration systems to the world’s fishing fleet. Our wide range of products covers any kind of refrigeration installation onboard a fishing vessel, both for freezing or cooling the catch at sea.

FREQUENCY CONVERTERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 79, 85, 867, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems.

Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled.

FRESH WATER GENERATORS- Freshwater generation System groups: 761 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Fresh water generators.

FUEL CONSUMPTION MONITORING- Monitoring equipment System groups: 109 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PD Volummeters The accuracy of the KRAL Volumeter is unmatched. Our meters are accurate to within ±0,1 % of rate over a wide range of flow and viscosity. The reproducibility is better than ±0,01 %. With excellent service life and long-term stability, this clearly shows that sturdiness and precision are not mutually exclusive. Nine European standards laboratories used a KRAL Volumeter for a calibration

5-126_PR_2016.indd 55 07.08.2016 11:45:33


56

intercomparison. With results beyond expectations, the report suggests using our device as the default transfer standard between kerosene laboratories

FURNISHING- Furniture & cabinets System groups: 541 EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Modulbaserte “City” og “Ideal” er hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder, tekstiler og farger er meget stor, det samme gjelder ben og vanger. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø eller nyhetene “Stressless®City og “Metro” ? Utforsk hele kolleksjonen i vår nye digitalkatalog. I tillegg leverer vi Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva.

FURNITURES- Furniture & cabinets System groups: 541 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com WILLY FURNITURE LINE: Together with the designers Ralston & Bau, we developed the Willy furniture line as we felt there was no furniture on the market that is especially made for the purpose to be installed in a ship. This environment requires furniture that has several functions in addition to look good and be modern. Together with designer, seamen and outfitters we came up with Willy. It has its inspiration from the Orca, the killer whale. See more under Advantages to read about the clients benefits when choosing Willy on their ship. Do also have a look on the pages describing our concept for choosing the colors for the furniture and the rest of the interior on a ship. New maritime furniture collection called “Willy”, inspired by the round shapes of the killer whale. Some of the most important in the design work was to find solutions that are flexible and simple to adapt to customers needs and wishes. Willy Maritime Furniture Collection is module based, this means it’s easy to assemble and to fit to the environment onboard. This ensures lower man-hours in the outfitting. We also create colour collections to simplify the choice for the customer, but we are also flexible to fulfil the customer’s needs

5-126_PR_2016.indd 56 07.08.2016 11:45:33

57


GANGWAYS- Ladders, railings, stairs, ramps & gangways System groups: 564 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium was the first, and is by far the most experienced manufacturer of aluminium gangways in the world. Marine Aluminium’s telescopic gangways are a very important offshore safety feature, and although the main purpose is personnel access between offshore installations, it can also be used to support utility transfer lines for fuel, mud, electricity and water.

GAS CARGO PUMPS- Pumps & pump units System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com SMB Liquid Gas, submerged, in-tank Cargo Discharge Pum Shinko - Nishishiba SMB type submerged motor pumps have been developed as the send-out pumps in LNG, LPG & DME storage stations, and pressurizing and circulating pumps in LNG cryogenic power generation plants. The pump is used in submerged condition in the cryogenic liquefied gas in the barrel installed outside of the storage tank. It can be taken out

of the barrel easily by closing the valve provided between the barrel and tank, if the necessity occurs to check the pump for maintenance and inspection.

GATE VALVES- Air & gas valves - Fluid valves & other armatures System groups: 513 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve

5-126_PR_2016.indd 57 07.08.2016 11:45:34


58

- Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

GEARBOXES- Gears FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Single Stage Gearbox The reduction gearboxes are designed for engines between 150 kW to 8000 kW. Maximum input speed is from 3200 rpm to 1000 rpm for the largest gearboxes. The reduction ratio is from 2:1 up to 10:1. The largest reduction is done by an additional gear train. The gearboxes can be delivered with PTO’s for hydraulic pumps or shaft generator. GXU Gearbox GXU gearboxes are designed for vessels where the size of the engine room is limited. The gearbox can be delivered with different center distances for best possible arrangement in the engine room. The gearbox is engineered with a solid design for high reliability in operation. PTO’s for hydraulic pumps or shaft generator can be delivered. Twin Input - Single Output Twin input - single output gearboxes is often used when variable power to the propeller is required. The gearbox can be operated with one or two engines at the same time. In vessel were extra reliability is required this is a good solution. The engines can either be placed in

front or behind the gearbox. PTO’s for hydraulic pumps or shaft generator can be delivered. The gearboxes are manufactured with following main components: . Cast steel gearbox housing . Input shaft arranged for flexible coupling . Hydraulic operated multi-plate clutch for secure and soft engagement . Gearwheels with hardened and ground helical teeth for silent operating . Hydraulic built in servo unit for secure propeller pitch setting . Output shaft with flange arrangement for propeller shaft coupling . All bearings of roller type with a low friction losses and long lifetime . Spherical roller thrust bearing with a low friction losses and long lifetime All parts are made of the most suitable material qualities.

GEARS- Gears System groups: 637, 638 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no SEW-Eurodrive a.s., Moss, Norway: Gearboxes, gearmotors, gearsystems.

5-126_PR_2016.indd 58 07.08.2016 11:45:34

59


GEARS AND TRANSMISSIONS- Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 637, 638, 867, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide.

GENERATORS- Aggregates - Control & automation systems - Generators, alternators & dynamos System groups: 861, 87, 871, 872, 875, 89, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application.

GPS / GLONASS- Positioning & navigation equipment System groups: 412 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex - DARPS - Differential Absolute and Relative Positioning Sensor The DARPS product line combines high- performance sensors for reliable and accurate absolute and relative positioning of two vessels such as a shuttle tanker and a FPSO/FSU. The DARPS has proven itself over and over in harsh environments worldwide. - DPS - Differential Positioning Sensor Our Differential Position Sensors - DPS product line is developed for applications demanding reliable, accurate and quality-controlled position and velocity. The system has been well-proven and adapted by professional marine and offshore users worldwide. Typical applications include dynamic positioing systems, docking control and high-speed vessels.

HANGAR DOORS- Watertight/weathertight doors & windows TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Hangar Doors Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment

5-126_PR_2016.indd 59 07.08.2016 11:45:34


60

configurations to help meet these needs. Offshore vessels often have an enclosed hangar for storage of equipment or for sheltering offshore operations. The rear deck is then accessed through a door in the aft end of the hangar. TTS Ships Equipment offers all kinds of door configurations: the most important design principles being compact construction, light weight and operation on a limited free space either on deck or in the hangar. A number of door types can be delivered either with outwards or inwards opening depending on the aft deck and hangar layouts.

HATCH COVERS- Hatches, covers, ports, ramps & platforms System groups: 30 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Offshore - Hatch Covers Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. TTS Ships Equipment AS can supply different type of hatch covers as Sliding type, Side hinged single flap, etc. Tailor made solutions are available upon request, depending on ship design and purpose.

HATCHES- Hatches, covers, ports, ramps & platforms System groups: 30 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra’s weathertight hatches type WTH are made of GRP sandwic. Low weight makes this hatch easy to operate and open, and is above all important through emergency hatches during escape. - High strength - Low weight - No corrosion = Low maintenance - Weight saving - app. 60% less than steel Steel, alu. or GRP hatches available Raised, flush or emergency type with spring hinges.

HEART STARTERS- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital.

5-126_PR_2016.indd 60 07.08.2016 11:45:34

61


A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.

HEAT RECOVERY UNITS- Heat exchangers & steam generation System groups: 74 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat heat recovery units.

HEATING PLANTS- Heat exchangers & steam generation System groups: 577 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

HEATING SYSTEMS- Control & automation systems System groups: 41 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Heating Complete heating solutions from individual components to complete heat tracing systems for offshore and onshore applications.

5-126_PR_2016.indd 61 07.08.2016 11:45:34


62

HELICOPTER DECK, EQUIPMENT- Helicopter deck equipment System groups: 566 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex - Helideck monitoring system - HMS 100 The helideck monitoring system is used to analyze helideck motion during helicopter landings to improve safety in hostile weather conditions. The HMS 100 monitors helideck attitude and vertical velocity, wind speed and direction, air temperature and barometric pressure and presents this information to indicate landing conditions. The HMS 100 is typically used offshore on floating production and storage vessels (FPSO) and seismic vessels.

HELICOPTER DECKS- Helicopter deck equipment System groups: 566 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Impressive weight reduction - no maintenance required - no painting - no repainting. Aluminium ensures a substantial weight reduction. The alloy used for Helidecks has the mechanical properties of mild steel and merely one-third of its weight. In addition, the extrusion technology provides the designers with possibilities that are impossible with steel. The Helidecks can be tailor made to fulfil the customer’s requirements and the delivery can

differ from a package for container transport to a completely installed “turn key” Helideck with lighting, fire-fighting etc.

HELIDECK LIGHTING- Lighting equipment & armatures System groups: 427 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Helideck Lighting Our unique Helideck Control System includes: Circle&H-, Flood-, Perimeter-, Status-, Obstruction lights, illuminated Windsocks and other monitoring functions related to Helideck operation.

HIGH TEMP/HIGH VISCOCITY SYSTEMS- Control & automation systems System groups: 3, 35 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Asphalt- / Bitumen- Liquid Pitch Pumps Twin-screw pumps Special design twin-screw pumps for handling of high temp./high viscocity liquids such as Molten Sulphur, Asphalt, Bitumen, Liquid Pitc Tar a.s.o.

5-126_PR_2016.indd 62 07.08.2016 11:45:34

63


Heated, quensched and speed-controlled cargo pumps

HIGH VOLTAGE ELECTRODE BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no PARAT MEH High voltage electrode boilers The PARAT High Voltage electrode boiler can be delivered with a capacity up to 50 MW. With 40 years of experience in marine boilers we have developed a rugged design that fulfills all class requirements. The new electrode system for marine use, is a result of many years of experience combined with an innovative design. The high voltage electrode boiler is extremely compact. The cost savings on ships is significant, since no transformer or low voltage cables are needed, thus reducing both installation costs, space requirements and maintenance. The electrical control panel includes a complete safety and control system. This system is based on a Siemens SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system.

HOOK SYSTEMS- Safety equipment System groups: 503 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com As a response to industry concerns, Norsafe has undertaken an extensive process to improve release gear for lifeboats. This targets safety issues, especially the avoidance of a premature release. Our new TOR MKII Hook Release System has been developed and built according to the new regulations MSC.1/Circ.1392 and MSC.1/Circ.1393, IMO resolution MSC.320(89) and IMO resolution MSC.321(89). New hook systems installed after July 1, 2014 must comply with these new regulations, and all non-compliant hook systems must be replaced before July 1, 2019. Norsafe Service stations are currently carrying out re-hooking projects worldwide. Norsafe is proud to present the new TOR MKII Hook concept, a further development on the long proven TOR MKI Hook. The new hook is intrinsically safer and includes safety devices required by operators and regulators. It has already been well received by Norsafe’s key customers and is probably the safest hook on the market. The TOR MKII Hook has been designed specifically for simplicity of use and clearly understandable operation. The yellow padlock, clearly visible on both sides of the hook - indicates that the hook is set and release cables correctly located. The locking mechanism of the new TOR MKII Hook is such that securing pins through the hook (as a locking device or set indicator) and fall preventers are not necessary.

5-126_PR_2016.indd 63 07.08.2016 11:45:34


64

HOOKS- Blocks & shackles System groups: 274, 344 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Harding offer a complete range of new high quality generation hooks that come directly from the frontline of product development, techniques and regulations. Harding’s SeaCure lifeboat release and retrieval systems (the new name for hooks) meet or exceed all IMO requirements and have an optional industry-recommended Secondary Safety System. The design is based on years of experience and feedback in service. It is safe to use and simple to operate and maintain. The SeaCure hook improves safety of crews and increases their confidence in their lifeboats.

HOT WATER BOILERS- Boilers, burners and incinerators System groups: 445, 577, 641, 841 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no MVH Vertikal Hot Water Boiler The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance.

The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.

HVAC- Accommodation work (including carpentry, HVAC) System groups: 51, 54, 541, 57, 583 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® ATEX Products for Cooling of Hazardous Areas AERON® Antenna Cooling Units The AERON® range of HVAC-R cooling products for hazardous areas is ATEX compliant, reliable and suitable for location within or in connection with hazardous areas. Our ATEX product ranges complies with the ATEX directive and consist of both standard

5-126_PR_2016.indd 64 07.08.2016 11:45:34

65


products and products tailor made to our customers’ requirements and operation environments. Our long experience in the marked and continuing developments of ATEX products, has led us to be one of the leading companies in cooling for hazardous areas in the marine and offshore business. MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium has delivered HVAC products/solutions for decades. Our product range includes shafts, water separating inlet louvers, louver housing, dampers and hatches. The best protection and longevity for customer’’s ventilation systems is achieved by high efficiency separating performance and the use of seawater resistant aluminium. The solutions offered can be designed to fit the customer’s requirements.

HYDRAULIC POWER PACKS- Hydraulic plants & equipment System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Hydraulic Power Packs HPU\’s in all executions, and variations for onshore-, offshore applications

HYDROGEN RECOVERY SYSTEMS- Boilers, burners and incinerators System groups: 64 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors.

IMMERSION SUITS- Lifesaving equipment - Safety equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no E-307 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD. & XXL SeaEco N6 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD. & XXL SeaEco+ N6 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: M ,STD. & XXL SeaNordic SEANORDIC IMMERSION SUIT SOLAS

5-126_PR_2016.indd 65 07.08.2016 11:45:34


66

COLOUR: 290 Orange SIZES: STD., M & XXL SeaArctic IMMERSION SUIT ARCTIC OFFSHORE SOLAS COLOUR: 290 Orange SIZES: STD. & XL

INCINERATORS- Boilers, burners and incinerators - Maintenance, spare parts and supplies System groups: 445 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Incinerator E-mail: [email protected] Phone: +47 37 19 98 00 Spare Parts E-mail: [email protected] Phone: +47 37 19 98 00 Service E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Incinerators - safe and efficient waste management: TeamTec AS is a leading manufacturer of incinerators, with more than 11,000 units sold worldwide since 1972. The TeamTec Incinerators provide safe and efficient waste management, which complies with the IMO regulations for both waste oil and solid waste incineration. TeamTec supplies a wide range of incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts. TeamTec Bilge water injection solutions: TeamTec water injection system for the TeamTec Incinerators is an efficient and automated disposal system for contaminated water. The system reduces operating issues related to OWS, increase sludge burning

capacity and reduce NOX emissions. Older incinerator models can easily be upgraded with TeamTec’s certified water injection upgrading kit. TeamTec After Sales - worldwide service and spare parts: TeamTec provides comprehensive after sales service for all TeamTec products worldwide: spare parts, commissioning, repair service, pre-installation survey, service agreements, training and general technical support.

INERT GAS SYSTEMS- Firefighting equipment - Inert gas components, CO2 System groups: 376 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Since the first installation in 1984, our design has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s

5-126_PR_2016.indd 66 07.08.2016 11:45:34

67


generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system.

INSTRUMENT CONSOLES- Centrals, consoles & panels LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no For bridge wings, winch control and other manoeuvring purposes Due to severe corrosion and paint problems with steel consoles, Libra has now developed GRP (Glassfibre Reinforced Polyester) consoles which completely solves these problems. They have the following features: - Fire retardant material - Corrosion- free - Solid GRP construction - Anti- magnetic - Low weight Standard colour RAL 9010 (other colours on request) Spraytight, hinged instrument cover Standard ext. colour, white RAL 9010 Steel fittings: Stainless steel AISI 316L

INSULATION- Insulation System groups: 51, 52 SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound

5-126_PR_2016.indd 67 07.08.2016 11:45:34


68

INTEGRATED ELECTRIC PROPULSION SYSTEMS- Power generation, propulsion & manouvering System groups: 62, 651, 7 STADT AS 6083 Gjerdsvika Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no STADT STASCHO is a No Loss AC drive that supplies sinusoidal voltage and current to the electric motor and back to the main switchboard. This gives very low harmonic disturbances without using transformers or filters. STADT STASCHO is specially developed for marine propulsion systems, where it is used together with controllable pitch propellers.

INTERIOR FLOORS- Interior doors & windows System groups: 109, 51, 512, 513, 514, 515 SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking;

low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound

JIS VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve

5-126_PR_2016.indd 68 07.08.2016 11:45:34

69


- Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

JOYSTICK- Control & automation systems System groups: 403, 63, 791 LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no Norways larges manufacturer of Control Levers. Supplier to leading system manufacturers all over the world. -Control lever: Type LF50, Joystick -Control lever: Type LF60, Joystick - multi-axis joysticks.

KNIFE GATE VALVES- Air & gas valves - Fluid valves & other armatures System groups: 72 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logisticknowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

5-126_PR_2016.indd 69 07.08.2016 11:45:34


70

KNUCKLE BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Foldable Knuckle Boom Crane Range from 2 mt to 330 mt - Sophisticated crane geometry for effortless work - Strenghts and flexibility for loading and unloading - Compact construction for numerious applications and use Knuckle Boom Crane range from 17 mt to 3000 mt Sophisticated crane geometry for effortless work Strength and flexibility for loading and unloading Compact construction

KNUCKLE/TELESCOPIC CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3, 321, 33 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Knuckle/telescopic cranes Type GPS (Straight), GPT (Telescopic) & GPK (Folding jib) Typical applications: .Supply vessels .Anchor handling/Tug .Research vessels .Cable and Pipe layers

LASHINGS- Cargo handling equipment - Chains, wires & ropes System groups: 315 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Lashings

5-126_PR_2016.indd 70 07.08.2016 11:45:34

71


LIFE CYCLE MANAGEMENT- Aggregates - Alarm equipment - Centrals, consoles & panels - Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Engineering services - Gears - Generators, alternators & dynamos - Meters & indicators - Monitoring equipment - Project management, construction management - Propellers & impellers - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 109, 12, 381, 40, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide

LIFE JACKET CONTAINERS- Bins, baskets, boxes and containers - Lifesaving equipment System groups: 503 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no - Low weight - Minimal maintenance - Stainless steel hasps - Hot galvanized steel supports - Ventilated

LIFE JACKETS- Lifesaving equipment - Personal equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Life jackets SEALIFE LIFE JACKET SOLAS COLOUR: 290 ORANGE SEALIFE TP LIFE JACKET SOLAS COLOUR: 290 ORANGE SIZES: CHILD - ADULT SEALION Inflatable 150N OR 275N /SOLAS, HR SOLAS COLOUR: BLACK. SIZES: STD. PVC cover

5-126_PR_2016.indd 71 07.08.2016 11:45:34


72

LIFEBOATS- Lifeboats/rafts & other boats System groups: 501, 503 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Free-fall Offshore: Harding offers freefall systems for use in offshore applications and merchant vessels. We apply our vast experience from the North Sea into the research and development of our products. Therefore, we are able to offer you the most sophisticated and safest freefall systems in the industry today. FF1200 (70p): The FF1200 is a 70 person freefall lifeboat specifically designed to meet the latest regulations on the Norwegian Continental Shelf in the North Sea, way beyond SOLAS rules for freefall lifeboats. Free-fall Shipping: The Harding LBF-serie of free-fall lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo. All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and the electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI 316, depending on how exposed the equipment is. Notifying body: Bureau Veritas (others on request) Totally enclosed lifeboats: Harding’s totally enclosed lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo.

All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI 316, depending on equipment exposure. Notifying body: Bureau Veritas (others on request) Harding lifeboats are certified with the latest LSA Code as amended With New hooks approved according resolution MSC.320 (89) and resolution MSC.321 (89) NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe conventional lifeboats are used all over the world, both on ships and offshore installations. The smallest boats in the lifeboat range are approved both as lifeboats and rescue boats. Our largest totally enclosed lifeboat (TELB) has a capacity for 136 people and is the largest on the market. The boats are double skinned, with foam buoyancy injected into the space between the inner and outer elements. The boats also have dedicated buoyancy tanks. This means that the boats are unsinkable, even if they become damaged or in a fully flooded condition. The craft has a positive stability up to 180º and is self-righting both when it is intact and in flooded conditions. The steering rudder nozzle has been specially designed to give maximum thrust from the propeller. The lifeboat system is robust and can easily withstand the powerful winds and high waves associated with extreme weather conditions.

5-126_PR_2016.indd 72 07.08.2016 11:45:34

73


The boats are equipped with on-load lifting hooks that are controlled from a release handle mounted at the steering position. Hooks will release simultaneously when the craft is fully waterborne. All Norsafe conventional lifeboats can be delivered with Norsafe’s new TOR MKII Hook Release System. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. The hull, superstructure, buoyant tanks, water and provision containers are all made of fire-retardant GRP. Our lifeboat systems also meet the new NORSOK R-002 standard required for Norwegian waters from 2015. The lifeboat’s hooks will release simultaneously when the craft is fully waterborne. Emergency release of the hooks is possible but the system is secured against accidental release. The fire protecting spray system pump takes seawater from the lowest possible location under the boat. The spray system provides water over the entire surface of the craft (1,200 l/min). The compressed air system has sufficient capacity to provide air for the maximum number of personnel and engine combustion for a minimum of 10 minutes. The over-pressure inside the boat prevents ingress of toxic fumes or gas. Provisions have been made to recharge the air system from the ship’s compressed air system.

LIFE-SAVING EQUIPMENT- Lifesaving equipment System groups: 50 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Marine rescue and safety epuipment. Lifesaving equipment for standby rescue vessels. Package deliveries.

LIGHT SOURCES- Lighting equipment & armatures System groups: 89 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Widest range of light sources available, and and unmatched knowledge of special bulbs and tubes. Large stock of lamps and fixtures for marine applications in stock.

5-126_PR_2016.indd 73 07.08.2016 11:45:34


74

LIGHTING SYSTEMS- Lighting equipment & armatures System groups: 427, 89, 893 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Marine Lighting Designed in close cooperation with leading ship-owners and Naval architects and designers. Navigation-, Search-, Floodlights and Deck lights for the most demanding requirements

LOW NOISE TUNNEL THRUSTERS- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no LOWNOISE TUNNEL THRUSTERS NO 1 in LowNoise Thrusters Brunvoll pioneered the LowNoise concept in 1977. Since then, we have continuously refined our solutions into a proven concept. Today, Brunvoll is recognized world wide as the major supplier of effective LowNoise thruster solutions. Noise levels of 75-88 dB(A) are typical in cabins next to and above conventional tunnel thrusters. Brunvoll’s advanced technology can cut this by up to 15 dB(A). Combined with other measures,

noise reductions of up to 20-25 dB(A) have been verified.

MACHINERY DRIVES- Electrical motors & starters System groups: 12, 6, 65 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no The machinery drives are designed to be the fastest drives to install, parameter-set and commission. They are highly compact and cost effective. Equipped with cuttingedge intellegence and safety capability the drives are designed specufically to meet the production and performancenneeds og system integrators, original equipment manufactures (OEMs) and panel builders, as well as the requirements of end users in a broad range of applications. Applications: The machinery drives are designed to meet the requirements of an extensive range og machinery applications. The drives are ideal for food and beverages, material handling, lifting, textile, printing, rubber and plastics, and woodworking applications.

MACHINING SERVICE- Engineering services System groups: 6 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Machining Services

5-126_PR_2016.indd 74 07.08.2016 11:45:34

75


Through 60 years of delivering custom-made solutions for offshore and maritime applications, Matre has gained superior experience with machining special steel - resulting in a high number of commissions as subcontractor for machined components. At Matre’s production plant our experts are equipped with modern and advanced CNC machine tools, ensuring effective production and accuracy in every minute detail. As an integral part of our quality process, we also have well-equipped premises for assembly, control, testing and storage of machined components.

MAIN BOILERS- Boilers, burners and incinerators System groups: 61 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat steam boilers. Capacity 500 - 25.000 kg/h. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our clients and customers can rely on being handed

the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close.

MAIN SWITCHBOARDS- Switchboards & relays System groups: 871, 872, 875, 89 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Low-Voltage Switchboard Medium-Voltage Switchboard Cargo Pump Switchboard Starter Cabinets

MARINE AND OFFSHORE UPS- AC units, air dryers, air cooling and heating components System groups: 7 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no AC and DC UPS solutions to ensure clean and secure power onboard.

5-126_PR_2016.indd 75 07.08.2016 11:45:34


76

MASTS- Davits and masts System groups: 411, 412 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Masts Tactical masts for military use are one of the main product categories at Comrod France SA, the company’s French subsidiary. All masts are manufactured at the company’s production facility in France. Lerc SA supplies telescopic, sleeve, man-pack, manual and motorised masts. The company can also provide a complete antenna and mast system for rapid deployment. Key features of the mast products include easy maintenance, standard and tailormade versions, and advanced control systems for unmanned use of the masts. Sleeve masts constitute the main product category in this segment. Lerc has superior expertise and a well-proven track record for calculating, designing and manufacturing masts, especially for large and heavy top-load applications.

MATTRESS- Furniture & cabinets System groups: 541 EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no

Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva

MEDICAL EQUIPMENT- Hospital & medical equipment System groups: 504 MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates.

5-126_PR_2016.indd 76 07.08.2016 11:45:35

77


Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.

MEDICAL EQUIPMENT, EMERGENCY- Hospital & medical equipment System groups: 504 MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no A medical quality assurance tool coupled with telemedicine: ShipMed® Safety System ensures simple and safe operation of the ship’s hospital. The medical quality assurance tool lays the foundation for securing life and health on board and has been developed by medical personnel with long experience in ship medicine, in close cooperation with the maritime business, and according to Norwegian and International standards and regulations. ShipMed® Safety System assures the hospital stores and provides a full overview of the stock, expiry dates, distribution and purchase of medicines and medical equipment, as well as reports for stock, consumption and purchase. The software also provides a guide to use of medicines and medical equipment, a quick reference for medical equipment for different injuries and video clips showing various medical procedures. The quality assurance tool is available in

Norwegian, English and Portuguese, and covers lists of ships medicine for a wide variety of flag states. Telemedical solution: ShipMed® Safety System offers an option for telemedical solutions on board ships through ShipMed® Premium membership. The solution is coupled to the quality assurance tool, and increases the likelihood of reaching a diagnosis and administering treatment quickly. It allows for contact between vessels and doctor on shore with moving images and sound, as well as transfer of medical data such as ECG, pictures and text. In that way, illness, pains and visible injuries can be properly described and communicated, and correct treatment or evacuation can start quickly

MEDICINE CABINETS- Furniture & cabinets - Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design

5-126_PR_2016.indd 77 07.08.2016 11:45:35


78

Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.

MEMBRANE SYSTEMS- Freshwater generation AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Air Products membrane systems meets your requirements for . Field-proven, robust membranes, which can withstand oil vapor as well as liquid water. . Exceptional total lifetime. . Guaranteed After Sales Services throughout lifetime.

MILITARY & PROFESSIONAL- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe has a wide range of boats for military and professional use, and attention is paid to guarantee the highest quality. Only the best craftsmanship, components and materials are used. The boats are specially designed to operate away from shore or the mother ship for extended periods of time. Combining superb seaworthiness, manoeuvrability and high speed, the boats are ideal for all types of assistance, patrols and other special applications. The layout and performance of the boats allow wide ranging functions, including operations in hostile areas. Undetectable and task flexible The boats have a low freeboard, a sprayhood specially designed for boarding, an anti-slip deck surface. They are self-bailing, have ample deck space, a self-righting system and a sturdy foam-fi lled fender. Radar waves pass through fi breglass, giving the boats an inherent stealth capability. This combined with very little use of aluminium or steel helps reduce the overall radar signature. For many users failure of the equipment is not - and cannot be - an option. The boats operating in the “no-failure-zone” can be equipped with a mechanical override control system for the engine electronics. Even if all on board engine electronics are heavily damaged or should fail completely, this system allows for the engines to be manually and mechanically run. Further,

5-126_PR_2016.indd 78 07.08.2016 11:45:35

79


Norsafe can provide boats with full redundancy, where the motor, power train and all support functions are fully isolated within the craft. This ensures a safe return for the crew to land or to the mothership. Approved by authorities The boats are designed, built and equipped to comply with SOLAS regulations or similar national regulations. Other codes and certifi cation modules can be supplied. All boats are specially designed and constructed to meet the need for fully available, low maintenance, standby and operation. Following fabrication, all Norsafe boats are fully Factory Acceptance Tested (FAT) to ensure the boat performance and on board systems are fully functioning according to standard test procedures and the agreed specifi cation for the equipment. Customers are welcome to attend FAT and sea trials at Norsafe’s factory which has easy ocean access. Tailor made solutions One of the advantages for Norsafe customers is our design fl exibility, making it possible to build boats specifi cally intended to meet client requirements. Since our fi rst deliveries of professional boats all craft have been purpose equipped for specifi c tasks. Norsafe work closely with the customer to understand the requirements and produce concepts most suitable for the purpose the boats are intended for. Usually inboard diesel engines are fitted - these can be driven by waterjet, stern or surface drives. Petrol outboard motors can also be installed if preferred. Norsafe offer single, twin or triple engine installations. This wide range of propulsion options gives a wide spectrum of operation - from shallow river or coastal operations to high speed offshore use. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review.

Norsafe as reserves the right to change specification without prior notice.

MOB BOATS- Lifeboats/rafts & other boats System groups: 501 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Marketing of mob-boats in MP-design, Seabear, ALusafe and Weedo. Service, repairs and upgrade of all types. SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info MOB boats

MOON POOL HATCH COVERS- Hatches, covers, ports, ramps & platforms System groups: 30 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Offshore - Moon Pool Hatch Covers Offshore vessels are often built to comply

5-126_PR_2016.indd 79 07.08.2016 11:45:35


80

with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. Moon pool hatch covers are based on standard hatch cover design principles with special attention to slamming forces and bottom sea pressure. Tailor made solutions are available upon request, depending on ship design and purpose. .Top sliding .Top 1 or 2 sections .Top folding .Bottom sliding .Bottom 1 or 2 sections .Bottom folding

MOORING EQUIPMENT- Capstans, bollards & hawse holes - Winches, drums & reels System groups: 43 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface.

MOORING LINES- Anchor, pipe & cable handling equipment System groups: 43 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no

8-STRAND KARAT® MAXI Plus has become standard terminology in high quality mooring applications. Very high strength/weight ratio allows substantial size reductions and ease in handling, as well as providing excellent overall economy. The new KARAT® MAXI PLUS ropes have the same properties but offer a higher MBL and much better abrasion resistance. The new KARAT® MAXI PLUS is DNV Type approved. 8-STRAND EuroRope Marine supplies a wide range of KARAT® MAXI PLUS mooring tails to suit different dimensions steel wire mooring ropes. We can offer both single leg TAILS and double leg endless RINGTAILS.

MOORING LINKS- Anchor, pipe & cable handling equipment System groups: 43 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Tønsberg Mooring Link - galvanised steel mooring link of compact design typically utilised as connection between wire rope and fibre tail. Available in three sizes 90 T, 120 T and 180 T. 300 T can be supplied on special request.

MOORINGS- Winches, drums & reels System groups: 43 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info

5-126_PR_2016.indd 80 07.08.2016 11:45:35

81


Moorings. - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface.

MUD PUMPS- Pumps & pump units System groups: 481 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Liquid oil mud pumps.

MUDBOXES- Bins, baskets, boxes and containers MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve

- Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

MULTIWHEELERS- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com TTS can offer a cost effective, high quality, series of multiwheelers/block transporters. The standard programme is from 75 to 520 ton pay load. The system allows movement in all directions. Two vehicles might be operated simultaneously by the same driver in tandem operation, either in hard connection (platform to platform) or soft connection (signal cable). Driver cabinet on each side makes the operation easier, as well as possibility for wireless remote control. Tailor made versions are also possible on request.

5-126_PR_2016.indd 81 07.08.2016 11:45:35


82

NAVAL SYSTEMS- Control & automation systems System groups: 41 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Naval Sonar - Portable Integrated Navigation Systems - Underwater Noise Measurement - Waterside Security

NAVIGATION- Positioning & navigation equipment System groups: 17 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Aids to Navigation ( Aton ) NAVAIDS We specifically design to meet or exceed all known operational and safety requirements for aids to navigation on offshore installations. Tranberghas for 30 years been the exclusive distributor for Tideland products in Norway.

NAVIGATION / POSITIONING SYSTEMS- Positioning & navigation equipment KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex Seapath Our Seapath systems are designed to meet the position, attitude and heading requirements of hydro acoustic positioning and seabed mapping systems. The Seapath integrates GPS and inertial navigation technology to optimize accuracy in bathymetric surveys, seismic surveys and ADCP (Acoustic Doppler Current Profiler) systems. RADius RADius is a relative positioning system developed for operation in harsh and demanding environment utilising radar technology. As a stand-alone system, or interfaced with dynamic positioning or integrated bridge systems, RADius provides an extremely accurate and responsive ald to loading and unloading procedures for operations in all weather conditions. Docking and all loading procedures are also applications that can take advantage of the RADius system.

5-126_PR_2016.indd 82 07.08.2016 11:45:35

83


NEEDLE VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

NITROGEN GENERATOR SYSTEMS- Generators, alternators & dynamos System groups: 196, 376, 6 WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no Air-gas separation membranes are sensitive to contaminations from hydrocarbon aerosols/liquid (i.e. oil products) in the sense that such contamination cannot be removed nor can the membrane be regenerated, without running the risk of destroying the membrane. Most membrane based nitrogen generators have traditionally been equipped with oil lubricated feed air compressors, which increases the risk of oil contamination of the membranes. Traditionally, this problem has been dealt with by applying traditional filtration techniques upstream the membrane, and increasing the feed air temperature after filtration, in order to create a gap between the actual temperature and dew point temperature of oil & water vapor. Even though filtration equipment is installed, there will always be a risk of oil vapor carryover into the membrane. One of the situations that may contribute to this risk is that the traditional air-gas membrane normally has a recommended max. operating temperature of 50 °C. The compressor cooling water available may have a temperature of 36 °C, which, owing to the feed air temperature rise across the compressor, may result in a feed air temperature of as much as 46 °C, prior to the temperature increase required to avoid vapor condensation. This leaves us with a temperature gap of only 6 °C, which is not enough to avoid vapor condensation, because there is a temperature drop higher that this

5-126_PR_2016.indd 83 07.08.2016 11:45:35


84

across the membrane, during the separation process. With the new ETech membranes, these problems are avoided, because, at first, the membrane material, polyamide, consists of a single composition, and not, as many other membranes, a dual composition, where the governing membrane is a thin layer applied on to a substructure. The two layers are normally of different materials. The polyamide may withstand a much higher temperature (typically as much as 130 °C), and may easily operate at a temperature of 60 °C, thus avoiding the risk of vapor condensation owing to lower operating temperatures. If however, there should be a vapor carryover, due to filtration failure or excess oil carryover from compressor, then the ETech membranes may be regenerated. ETech can therefore offer an exchange arrangement, provided that ETech membranes are already installed. It is quite apparent, the cost savings in such an arrangement, as opposed to purchasing brand new membranes. The Life Cycle Cost of Nitrogen generator can be reduced with as much as 60% compared to a normal membrane set up, and will also contribute to increased safety, in terms of regularity and system capacity.

NITROGEN GENERATORS- Generators, alternators & dynamos System groups: 376 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no

Since the first installation in 1984, our design has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system.

NOZZLES- Air nozzles, jealousies and batteries - Fluid nozzles & mixing batteries System groups: 401, 404, 62, 721 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Nozzles for oil burners MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no

5-126_PR_2016.indd 84 07.08.2016 11:45:35

85


MATRE Nozzles Matre has developed different types of nozzles for firefighting. These are permanent installed high capacity deluge nozzles and pop-up nozzles for helideck or larger areas such as hangars or similar. Pop-up nozzle: The deck integrated pop-up nozzle can be delivered in two versions: offshore-/ ship version and yacht version. Standard material is SS316 for both nozzles and main parts in foam skid. Optional materials for nozzles are seawater resistant bronze and even titanium. The nozzles are installed flush with the deck top surface.When the system is released the nozzles will be lifted up by the water pressure and make an effective spray distribution of water/foam mixture to the entire landing area. According to the latest requirements given in CAP-437 these nozzles are further developed. The flow from a blocked nozzle will now remain the same as a fully popped-up nozzle. In this way the system still deliver full water capacity on deck if any nozzle are blocked. Flexi nozzles: MATRE Flexi Nozzle is a high capasity deluge nozzle. Both water capacity, spread angle and jet direction can be adjusted. MATRE Flexi Nozzles are in size 1” to 4” with flow range from approx. 200 l/min. to 4000 l/min. These nozzles have adjustable direction, spread angle and capacity. The large models of the nozzle operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution. Matre Flexi Nozzle can be used when a specific area has to be covered like:

- Car deck on a ferry - Tank top - Well head area The larger models of the nozzles operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution.

OBSTRUCTION LIGHTS- Lighting equipment & armatures System groups: 427 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Obstruction Lights High quality medium and low intensity LED obstruction lights in accordance with ICAO, FAA. Available for use in Zone 1, Zone 2 and Safe area.

OFFSHORE MODULES- Accommodation modules MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium can supply a wide range of custom built modules for various purposes such as: - Accommodation

5-126_PR_2016.indd 85 07.08.2016 11:45:35


86

- Office space - Workshops - Containers - Storage Areas - Control Room Modules - Special purpose Modules - Heli-guard Areas - Helicopter Hangars Marine Aluminium can offer complete Living Quarter Extensions, also made with glass facades insulated to A60 fire class. These modules offer first class office or recreational areas on the offshore installations. The Modules can be supplied ready outfitted and insulated to any fire-rating. Low weight makes installation easier by reducing the amount of work required offshore. The modules can be fully outfitted and still be lifted using existing cranes on the installation.

OIL BURNERS- Boilers, burners and incinerators System groups: 577, 641, 644 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Oil burners Separate control panels and accessories for oil burners.

OIL FILTERS- Fluid filters System groups: 70, 71 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Oil filters

OIL PREHEATERS- Preheaters System groups: 703 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Oil pre-heaters

PAINTS- Coatings & paint System groups: 443 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.

5-126_PR_2016.indd 86 07.08.2016 11:45:35

87


PANELL PRODUCTION LINES- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Since our first Panel Production Line delivery in 1977, TTS has delivered more than 60 Panel Production Lines to shipyards worldwide. Our solutions have in many cases been developed in co-operation with demanding customers, enabling us to build up a unique know-how of the technological challenges facing the industry’s production area. Different solutions for different requirements In order to fulfil the complexity of requirements related to production volumes, material dimensions, workshop sizes and layouts, material flow, investment and payback considerations and capacity, we offer a range of Panel Production Line solutions that can be customised to any shipyard. Our Module Based Designs offer stepwise investment TTS offers modular solutions in order to accommodate yards with limited investment budgets or need for stepwise increase of panel production capacity. Thus, a Panel Production Line can be installed as a complete unit or as individual sections purchased over time.

In either case, the final result is the same - a significant improvement in productivity. Attractive return on investment Due to our ability to deliver a range of options - from relatively low-tech mechanical solutions to highly automated and heavy duty solutions - our customers, ranging from small, specialised yards to large high-volume yards, experience attractive return on investment through significant improvement in productivity, capacity and quality.

PASSENGER SUITS- Lifesaving equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no SeaPass SEAPASS PASSENGER SUIT SOLAS COLOUR: 200 Fluorescent Orange SIZES: 50-100cm / 100-150cm / 150-200cm

5-126_PR_2016.indd 87 07.08.2016 11:45:35


88

PLATE HEAT EXCHANGERS- Heat exchangers & steam generation System groups: 36, 577, 7 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Sondex, Denmark Plate heat exchangers.

POWER SUPPLIES- Alarm equipment - Centrals, consoles & panels - Control & automation systems - Meters & indicators - Monitoring equipment - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 79, 791, 792, 793, 795, 85, 86 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.

POWERED WHEEL TRANSPORTER (PWT)- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The PWT-system is a module based transfer system, developed for fast and flexible moving of ships. A sophisticated control system enables movement in all directions, at the time being easy and user-friendly to operate. The system’s flexibility makes it possible to solve all common transfer operation and cope with different load, MDL, width, blocking length etc. Several safety features help the operator to perform the transfer according to modern safety standards. The PWT-system gives excellent access to the hull/trestle and has low requirement to ground conditions. The power unit(s) might be built-in in each module, every second/third module or as a separate unit. Available payload per unit is from 90 ton to 450ton.

PRECISION MECHANICS- Other construction assistance (cleaning, rigging, stores, support) LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no

5-126_PR_2016.indd 88 07.08.2016 11:45:35

89


Lilaas AS manufacture precision mechanics, details, assembled units and system solutions. The company is well known as a creative partner for ideas and problem solutions on different fields. Our highly skilled workers manage 15 CNC-controlled machines. The limit of tolerance is 0,004 mm, using among other machines, Mazak Integrex 200 for optimum complete machining and Kitamura H300SL with 200 tools and 40 palettes. Our production is based on our own or customer documentation, and is highly effective, with general integration between machinery, CAD and CAM software.

PRIMERS- Coatings & paint System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Jotamastic 80 - Epoxy mastic primer Jotamastic 87 - Epoxy mastic primer Jotamastic 90 - Epoxy mastic primer Jotamastic Smart Pack - Primer for maintenance Jotacote Universal - hard-wearing epoxy primer Jotacote Universal N10 - hard-wearing epoxy primer

PROFILE AND BEAM CUTTING LINES- Plates and profiles System groups: 196 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com For processing profiles and beams, TTS offers fully automated cutting lines with integrated systems for handling and robotic cutting. A TTS profile and beam cutting line deliveres consistent high quality cuts on all kinds of profiles and beamsflatbars, bulb profiles, angles, T-beams and U-channels. TTS Interactive Macro Assignment for Cutting - CIMA, is a PC based software package used for offline programming of profile parts. The profile and beam cutting line is a module-based system that can be intergrated to form a complete system, suitable for larger shipyards and the heavy steel industries, as well as smaller steel production facilities. Features that may be included are: .Logistics system for transport, processing and buffering of all types of profiles .Integrated PC and PLC control system .3D sensing and compensation .Accurate length measuring system .Scrap and small piece handling .Text and ID marking of profiles .Reference line marking .Bending line marking .Automatic drying of profiles .Edge celaning of profiles .Profile grinding and sorting system Minimal installation and start up time is achieved through full scale testing of each cutting system before shipment to customer.

5-126_PR_2016.indd 89 07.08.2016 11:45:35


90

PROPELLERS- Propellers & impellers System groups: 63 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no CP Propeller

The CP Propellers are manufactured from 1000 mm to 5000 mm in diameter. They are delivered with 3, 4 or 5 blades. The propeller hub and blades are manufactured in Ni.Al.-bronze. They can also be delivered in Stainless steel. The hydrodynamic blade design calculations are based on detailed analysis in computers together with Finnøy’s long experience. The propeller shaft is hollow bored and made of carbon steel or stainless steel. The pitch is adjusted by the push - pull rod. It transfers the axial force from the servo piston in the gearbox to the pitch setting mechanism in the propeller hub. The propeller hubs, type P26 to P48, are grease lubricated and from P39 to P125 are oil lubricated. The stern tube is delivered complete with bearings, sealing boxes and a gravity tank for stern tube oil. The stern tube can be delivered suitable for either oil or water lubrication. The sealing boxes are Finnøy’s own design, but other types can also be supplied. The propeller shaft flange is a split type for the smaller shafts and an oil shrink type for the larger shafts. Benefits of controllable pitch propellers compared to fixed pitch propellers: . Secure and precise manoeuvrability . An increase in the average speed . Stern tube wear is reduced . A constant speed at engine is possible . Easy replacement of spare blades . Engine wear is minimized . Reduced fuel costs . Dynamic position of vessel possible . Stepless speed control of the ship . Load control of engine is possible . Full power available under all conditions . The propeller can be designed for free running and towing Propeller Design All ships have individual needs. Speed is important for some ships. Towing pull is more important for others. To satisfy these needs Finnøy use the most suitable software

5-126_PR_2016.indd 90 07.08.2016 11:45:35

91


together with Finnøy’s knowledge when designing propeller blades. The propeller blade is designed for best possible performance regarding thrust, efficiency, noise and vibration. The blades are ground and balanced according to ISO 484 standards. Nozzle With ships that need maximum towing thrust a nozzle could be fitted. The nozzle increases the bollard pulls by approx 30%-40% over an open propeller absorbing the same power. It can be delivered as a steering or fixed nozzle.

PROPULSION- Other engine & propulsion equipment System groups: 40 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no BRUNVOLL PROPULSION SOLUTIONS Brunvoll is committed to developing new propulsion units with CPP technology. To complement our range with azimuth FPP Azimuth Thrusters, we are working together with Steerprop Ltd, in Finland. For conventional CPP propulsion, we have a collaboration with Finnøy Gear & Propeller to enable complete delivery of thruster units combined with main propulsion equipment including gears, shaft line, and propeller. This teamwork makes it possible for Brunvoll to offer coordinated systems for automation of propulsion and manoeuvring.

PROPULSION SYSTEMS- Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears - Propellers & impellers System groups: 40, 60, 601, 61, 62, 637, 638, 65, 793, 795 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise.

PROVISION CRANES- Cranes, crane equipment, lifting devices & booms System groups: 563 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com

5-126_PR_2016.indd 91 07.08.2016 11:45:35


92

Monorail design with a capacity of up to SWL 20 t - Designed for the efficient handling of spares and provision in harbour - Two separate hooks supported by a trolley travelling on a monorail beam operating on both sides of the vessel - Available electric or hydraulic driven

PROVISION STORAGE- Galley, pantry equipment and whiteware System groups: 552 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Teknotherm refrigeration plants for provision rooms are available as standard split systems or as factory assembled units forming a total package with necessary operation and stand-by system. Systems can also be delivered as central cooling/freezing machinery for refrigerators and catering equipment.

PUMP UNITS- Pumps & pump units - Regulators & switches System groups: 309, 438, 439 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Transport pump units Pumps and equipment

PUMPS- Pumps & pump units System groups: 3, 353, 354, 438, 6, 7, 803 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no *Centrifugal pumps - Dickow Pumpen KG *Eccentric pumps -ASV Stuebbe GmbH & Co KG *Centrifugal pump of plastic materials - ASV Stuebbe GmbH & Co. KG *Booster pumps, water supply, industrial pumps Aturia Pumps, Italy *Air operated diaphragm pumps, air powered doble diaphragm pumps - Yamada Europe, Netherlands horizontal pumps - APEX pumps *Centrifugal magnetic coupled side channel pumps - Dickow pumpen KG, Germany *Screw pumps, eccentric screw pumps, mono pumps - Armatech FTS GmbH, Germany *Peristaltic pumps, hose pumps - Ragazzini, Italy *Centrifugal pumps bombas ercole marelli - Sundyne Marelli, Spain *Boiler feed pumps, cooling systems, booster pumps - Edur Pumpenfabrik GmbH, Germany *Diaphragm dosing pumps, piston pumps, plungerpumps, solenoid metering pumps, dosing plants - Seybert & Rahiner, Germany *OBL dosing pumps (API 675), Milan, Italy Alfsen og Gunderson AS is a leading supplier of fluid handling equipment for offshore use. We deliver centrifugal pumps and pumps systems, metering, dosing and injection pumps for chemicales. AG also designs and builds complete skid mounted units, consisting of pumps, regulation and monitoring systems acc. to API/NORSOK standards and regulations. We have inhouse engineering capacity, and

5-126_PR_2016.indd 92 07.08.2016 11:45:35

93


can do all kind of engineering, incl. drawing and detailed design, production, automation and commissioning works. FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Pumps Matre Pumps comprise a wide range of specially designed, effective and reliable liquid ring pumps and centrifugal pumps. Our pumps represent state of the art pumping technology, and are results from many years of research and development - often in close cooperation with our customers. Matre Pumps are utilized by some of the worlds most recognized manufacturers of diesel engines and lifeboats, e.g Rolls Royce Marine, Wärtsilä, Hedemora Diesel, CAT Diesel, Cummins Diesel and Schat-Harding. Our pumps are delivered in salt-water resistant bronze, with shafts of stainless steel. Matre Pumps feature a robust design and withstand polluted water containing particles such as sand and shell. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com .

PURIFICATION SYSTEMS- Purification plants & fluid treatment System groups: 355, 382, 444, 57, 867 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors.

RAIL TRANSFER SYSTEM- Ladders, railings, stairs, ramps & gangways System groups: 52 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The Ship Rail Transfer System is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects. The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 350 tons. .The transfer system operates on one level

5-126_PR_2016.indd 93 07.08.2016 11:45:35


94

.No pit required

.Flush rails will allow for cross traffic all over the yard

RAILING SYSTEMS- Ladders, railings, stairs, ramps & gangways System groups: 533 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no The field installed railing systems are highly versatile and can be adapted to any structure. The advantages of using field installed railing systems are the reduced weight, easy installation and ease of modification or configuration. The system can be installed offshore without any hot work.

REFERENCE SYSTEMS- Control & automation systems - Positioning & navigation equipment System groups: 43 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex SpotTrack laser-based reference system SpotTrack is primarily used as a reference system for relative positioning in DP operations. The SpotTrack sensor is a robust motion stabilised rotating laser sensor which measures range and bearing to one or several retro-reflective targets installed on the target platform or vessel. Automatic wave motion stabilisation

provides optimum target lock. The onboard HMI unit allows for easy configuration and monitoring of the SpotTrack system.

REFRIGERATION PLANTS- AC units, air dryers, air cooling and heating components System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON´s range of refrigerating products will cover every need for refrigeration onboard modern ships and offshore installations. All refrigeration machineries and cooling products will be delivered according to requirements from yards, owners, classification society, and national authorities. Our refrigeration machineries are constructed for marine and offshore applications. Components and materials are chosen on the basis of our customers requirements and our long experience in the business. Emphasis is put on safety, energy efficiency, small dimensions, low weight and easy maintenance as well as site installation friendly solutions. The refrigeration plants can be delivered either as direct expansion systems or as chilled water plants for indirect cooling. Our plants can be delivered with aircooled or water cooled condensers, compressors for reciprocating or screw type systems, or as multi compressor units fitted with several compressors. Whatever the requirements, we will provide an optimal designed plant that meet your demands. Our refrigeration products may be delivered for ATEX or non ATEX areas. . Air cooled or water cooled Chilled water

5-126_PR_2016.indd 94 07.08.2016 11:45:35

95


refrigeration units - CW. . Air cooled or water cooled Refrigeration units with Direct expansion - DX. . Air cooled or water cooled Split AC units for ATEX or non ATEX. . Fan coils for Chilled water or ATEX air-cooled refrigeration units. . Complete Provision room refrigeration systems. . Self Contained Units for return air or fresh air supply. . Compact Deck units with Air Handling Units and refrigeration units built together. . Taylor made cooling systems in ATEX or non ATEX. . Antenna cooling units

REFRIGERATION SYSTEMS- AC units, air dryers, air cooling and heating components System groups: 362, 433, 554 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

REFRIGERATION, SPARE PART- AC units, air dryers, air cooling and heating components System groups: 362, 554 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Compressors, condensers, evaporators, valves, pulleys and motors. All manufacturers but mainly Danfoss, Bock, Carrier, Frigidaire, Lehmkuhl, Mycom, Tecumseh and York. Also supplier of refrigerant plants. Service

REM DRIVEN THRUSTERS (RDT)- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no RIM DRIVEN THRUSTERS (RDT) The Brunvoll RDT Concept with major potential in different areas. The Brunvoll Rim-Driven Thruster saves space and lower environmental impact with exceptionally low noise. The thruster, propeller and motor are in one compact unit There is no need for an external motor, shafts or couplings. Water-lubricated bearings eliminate

5-126_PR_2016.indd 95 07.08.2016 11:45:36


96

the need for lube oil, and the risk of oil pollution. With no central shaft and no dynamic seals, there is less risk of damage due to line and rope entering the thruster. Permanent magnets provide greater flexibility in selection of motor speed (number of motor poles) and a motor with high efficiency running at a lower temperature. Planned development of the RDT concept - Retractable Azimuth - Flexibility - Efficient manoeuvring - Highly compact - small footprint - Minimal height - Minimal space needed - Can be placed in narrow skeg - Low noise and vibration

REMOTE CONTROL- Control & automation systems System groups: 381, 79 FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Remote Control Electronic remote control for control of gearboxes and cp-propeller systems. Remote control systems of all types can be supplied, as a single panel for control of pitch and rpm to larger combinator controls and single lever joy-stick systems. Standard: . Pitch indication on all panels . Control of clutch In/Out from all remote stations . Alarms for control voltage failure and pitch feedback failure . Emergency control from main panel on bridge . Control position changeover between main and slave controls,

with synchronisation of the control levers . Dimming of all lights and indicators on the bridge panels Optional: . Automatic overload control where rpm and fuel consumption are the main parameters . Propeller rpm indication

RESCUE BOAT DAVITS- Davits and masts System groups: 501 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Rescure Boat Datits TTS Marine AS is a supplier of single point davits for life saving equipment according to SOLAS (LSA). TTS has choosen DNV as a Notified Body and the standard davits are supplied with EC Type-Examination Certificate. TTS is specialized in creating solutions to meet your requirements and can also offer davit and boat as a complete package.

RESCUE BOATS- Lifeboats/rafts & other boats - Lifesaving equipment System groups: 501, 503 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no

5-126_PR_2016.indd 96 07.08.2016 11:45:36

97


Harding offers a new range of rescue boat systems for offshore applications, merchant and passenger vessels. Our special designs ensure great stability and optimal working conditions on the vessel in rough sea conditions. We deliver rescue boats with petrol engine or diesel inboard engine. All boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). RRB: Harding’s rigid rescue boats have a special design that ensures great stability, as the outer and inner hulls are shaped in separate moulds. The buoyancy tank provides sufficient buoyancy to keep the boat afloat when flooded and fully manned. The boat can be delivered with or without an engine. We deliver rescue boats with petrol engine or diesel inboard engine. The boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). Harding fast rescue boats: Harding’s fast rescue boats can be supplied with both outboard petrol and inboard diesel engines. The boats have high-speed hulls, achieving speed up to 35 knots. Our fast rescue boats have hydraulic steering as standard. The robust GRP frame ensures good self-righting abilities, and large drain valves in the stern ensure drainage from the deck. The boats are equipped with high-quality navigation lights and switch panels (IP 56). Fast rescue boat in aluminum For rough usage under tough conditions Harding can also provide Fast rescue boats fitted with aluminum hull.The hull is designed for speed and stability, which means optimal

working conditions on the vessel in rough sea conditions. The boat achieves speed up to 35 knots. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Sale of boats in MP-design, Seabear, Alusafe and Weedo. Workshop for rescue- and work boats. NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe has the market’s widest range of rescue boats and daughter craft for ships, offshore installations, the coastguard service, police and other rescue services. Combining superb seaworthiness, maneuverability and speed, our boats are ideal for all types of rescue, patrols and other general applications. The boats are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit or outboard petrol engines. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. In accordance with current IMO regulations, all RO-RO Pax vessels must have fast rescue boats with a minimum length of 6 m and a top speed of at least 20 knots. We have boats which fully comply with these requirements and all equipment has been approved in accordance with latest SOLAS and subsequent

5-126_PR_2016.indd 97 07.08.2016 11:45:36


98

amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice.

REVERSE OSMOSIS PLANTS- Purification plants & fluid treatment System groups: 584, 761 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon, salg og vedlikehold av avsaltningsanlegg ved hjelp av omvendt osmoseanlegg/RO membrananlegg. Verksteder og service world wide.

ROPES- Chains, wires & ropes System groups: 43, 437 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no 12- STRAND Twelve strand braided rope, made from DYNEEMAT HMPE grade SK 75, with a braided jacket of polyester. This gives a compact, round rope with a circular cross section and good spooling qualities.

DynamaxT Plus with Polyester jacket is manufactured for applications where heavy abrasion is expected. Polyester has low friction against steel. For special applications our Dynamax Plus can be manu-factured with other type of jackets (dyneema, composite, etc.)

RSW SYSTEMS- Cargo handling equipment System groups: 32 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com RSW systems - Ideal for pelagic (purse seining and mid-water trawling) - Enables preservation of large catches, by cooling the catch rapidly to a temperature that allows storage on board over time, without significant reduction in quality - Has enabled large quality of mackerel, horse mackerel and herring to be used for human consumption - Improves quality on fishmeal by better rawmaterial - Reduced quotas set higher standards - better product means better price Teknotherm RSW plants mean rapid chill-down and storage of the catch in Refrigerated Sea Water. Storing the catch in RSW is an effective and cost-saving method of preserving the catch until landing ashore or further processing on board. The catch is brought down close to the freezing point of seawater in a minimum time by Teknotherm`s highly efficient RSW-chillers of flooded shell & tube type.

5-126_PR_2016.indd 98 07.08.2016 11:45:36

99


RUST PREVENTION AGENTS- Additives & agents - Anti-corrosion System groups: 27, 28 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.

SAFETY EQUIPMENT- Safety equipment System groups: 503 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Marine rescue and safety equipment. Lifesaving equipment to standby rescue vessels. Package deliveries.

SAFETY SYSTEMS- Control & automation systems System groups: 375 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com

Product groups - Fleet Management Software - Navigator safety system - Safety system, K-Safe - Voyage data recorders - Waterside Security

SAFETY VALVES- Air & gas valves - Fluid valves & other armatures System groups: 73, 75 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve

5-126_PR_2016.indd 99 07.08.2016 11:45:36


100

- Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

SCREW PUMPS- Pumps & pump units FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Screw pumps

SCRUBBERS- Purification plants & fluid treatment System groups: 70 YARA MARINE AS 0277 Oslo Telephone: +47 47 88 85 44 e-mail: [email protected] Internet: www.greentechmarine.com Green Tech Marine® scrubber R15 By using Green Tech Marine® scrubbers, shipowners can continue to operate on heavy fuel oil instead of more costly marine gas oil while staying below the strict IMO requirements regarding sulphur emissions. Fuel prices of marine gas oil are expected to rise even higher in 2015 when the 0,1% sulphur limit enters into force. The Green Tech Marine® scrubbers make it simple to meet new environmental

regulations by replacing your ship’s exhaust silencer - no structural modifications required. You also benefit from: .Proven reduction of SOx and PM, compliant with MARPOL Annex VI -MEPC 58 and 59 .Hybrid scrubber - both open and closed loop operation .An extremely small footprint .Low weight resulting in minimal change to stability conditions .Energy-efficient To see some of the innovative features of the Green Tech Marine® Scrubber, point at the appropriate hot-spot with your mouse The scrubber is a hybrid scrubber and can both operate in open and closed loop. Closed loop to be used while in port and during maneuvering re-circulating the water already within the scrubber. When at sea switching to open loop again. There is no need for water treatment in open loop since the natural alkalinity of seawater neutralizes the acid. Wash water is continuously monitored at the inlet and the outlet to make sure it is in line with the criteria of MEPC 184 before it is discharged into the sea with no harm to the environment.

SEATS- Furniture & cabinets EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Modulbaserte City er ett av våre hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder,

5-126_PR_2016.indd 100 07.08.2016 11:45:36

101


tekstiler og farger er meget stor, det samme gjelder ben og vanger. Den er designlik med en av våre kjente Stressless® hvilestoler, Orion. Kombinasjonen er en kjent og kjær slager i mannskapsmiljøer verden over. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø? Utforsk hele kolleksjonen i vår nye digitalkatalog.

SEAWAGE TREATMENT PLANTS- Purification plants & fluid treatment System groups: 58 JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com EcomotiveTSewage Treatment Plant by JetsT A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience.

SELFCLOSING VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve

5-126_PR_2016.indd 101 07.08.2016 11:45:36


102

- Diaphragm Valve - Storm Flap Valve

SENSORS- Sensors, gauges & detectors System groups: 60 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Helideck Monitoring System - HMS 100 - Marine level switches - Marine pressure transmitters - Marine temperature sensors - Motion and heading sensor products - Radar based tank gauges - Sensor simulator WM-25 - Signal converters and zener barriers - Water ingress detection system - Wireless temperature monitoring for compressors - SENTRY KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex The ultimate marine motion sensor The MRU is suitable for any maritime operation that requires attitude determination and motion compensation. Kongsberg’s range of motion sensors provides high accuracy motion measurements in all dynamic environments. They cover all marine activities, from small hydrographic vessels to large vessels and installations. Typical applications for MRUs . Motion compensation of single and multi-beam

echo sounders . Orientation and attitude measurements on AUVs and ROVs . High speed craft motion control and damping systems . Heave compensation of offshore cranes . Dynamic positioning . Hydro acoustic positioning . Ship motion monitoring . Ocean wave measurements . Antenna motion compensation and stabilization

SENSORS AND INSTRUMENTS- Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381, 40, 79, 792, 793, 795, 85, 87, 875 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators.

5-126_PR_2016.indd 102 07.08.2016 11:45:36

103


SEPARATORS & COWLS- Separators & trapsSystem groups: 73, 803 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks.

SERVICE PLATFORMS- Hatches, covers, ports, ramps & platforms System groups: 30 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Service platforms: TTS has designed a range of platforms for use in routine service work and

installation, significantly including tunnelling work for the mining industries. The platforms all feature double or triple-telescopic booms and are built with strong and rigid support. Over 2,700 TTS service platforms have been delivered to customers around the world, all supplied ready for connection to the customers’ hydraulic system.

SHACKLES- Blocks & shackles System groups: 344 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D - Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles

5-126_PR_2016.indd 103 07.08.2016 11:45:36


104

SHIP HANDLING TROLLEY (SHT)- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Ship Handling Trolley (SHT) is further cost efficient development of TTS’ well known rail trolley. Tyre wheels make the rails needless and enable the operator to move the ship “anywhere” in the yard. Like all other TTS transfer Systems fluid bed system gives full control of peak loads and load levelling properties. Each trolley has a payload of 150ton SWL and can be arranged differently depending on the load distribution and total load.

SHIP HORNS- Other nautical equipment System groups: 427 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com FROM CLASSIC “HONKS” TO COMPLETE ACOUSTIC SYSTEMS A Kockum Sonics whistle is not only high-quality design, it also contains the experience of more than 1 million TYFON® installations! Audibility is determed not simply by the strength of sound emenating from the whistle - much more is entailed to overcome absorption, distortion and local noise. This quality is the result of more than 80 years of development.

The TYFON® fulfi ls all current IMO and national authority regulations.

SHIP INTERIOR- Interior floor, wall & ceiling covers System groups: 511, 524 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.

SHIPAGENTS- Administration, broking, finance & insurance services BERGEN AGENT AS 5853 Bergen Telephone: +47-55 92 28 90 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.bergenagent.no

5-126_PR_2016.indd 104 07.08.2016 11:45:36

105


Shipagents 24 hour service GRIEG A/S, ALEX. BIRGER 5853 Bergen Telephone: +47-55 92 28 80 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no Shipsagents 24 hour service

SHIPBROKERS- Administration, broking, finance & insurance services GRIEG A/S, ALEX. BIRGER 5853 Bergen Telephone: +47-55 92 28 80 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no Shipbrokers 24 hour service

SHIPLIFT- Lifts, hoist & escalators System groups: 321, 561 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com A shiplift enable your yard to launch end retrieve ships in a very time efficient and controlled manner. All winches are monitored by the control system and load cells to ensure load distribution within the design limits. By utilizing

various type of hoist capacities and vary the spacings, different demands are met with regards to MDL, total capacity, platform size, etc. If a TTS rail trolleys are used as launching system, the trolleys can be left on the platform when submerged.

SHIP’S HEALTH SERVICE- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board

5-126_PR_2016.indd 105 07.08.2016 11:45:36


106

vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.

SHIP’S HOSPITALS- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no ShipMed Hospital Well thought-out and functional solutions Medi 3 ShipMed AS offers project planning and delivery of complete interior solutions, medicine and medical equipment to the ship’s medical facilities. Our hospital solution is adapted to each vessel based on type of vessel, number of crew, flag and certification requirements. The ShipMed Design Tool enables us to contribute with solutions already in the project planning phase and presents 3D drawings of the recommended interior solutions for the ship’s hospital. With ShipMed Hospital our customers can be sure that the ship’s medical facilities are equipped to the right extent.

SHIP’S MEDICINE- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.

5-126_PR_2016.indd 106 07.08.2016 11:45:36

107


SIDELOADING SYSTEMS- Cargo handling equipment - Cranes, crane equipment, lifting devices & booms System groups: 307 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Side loading system - Conveyor system The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side loading conveyor system. SWLs range from 6-20 tonnes. The system offers the possibility of installing an outer platform which can be used for larger tidal variations, and is also ideal for reefer ships. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity Side loading system - Side Mover The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side mover system. SWLs for one lift range from 2-8 tonnes. The system is ideal for smaller dry cargo ships and offers the possibility of tandem operation of the lifts for handling long cargo. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity. Side loading system - Side Swinger

The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side swinger system. SWLs for one lift range from 4-20 tonnes. Key benefits of a side loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity.

SILENCERS- Exhaust components & silencers System groups: 109 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no We deliver any type of square and circular high efficiency silencers.

SIMULATORS- Control & automation systems System groups: 109 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Dynamic positioning simulators - E-Learning system - Engine room simulator - GMDSS simulator - Liquid cargo handling simulator - Offshore Vessel Simulator - Ships bridge simulators - Thermal power plant simulator

5-126_PR_2016.indd 107 07.08.2016 11:45:36


108

- VTS - Vessel traffic services simulator - Crane simulators

SPECIAL SUITS- Lifesaving equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no SeaRescue RESCUE MAN SUIT COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL NAVY QUICK DONNING / ANTI EXPOSURE SUIT COLOUR: 290 Orange SIZES: STANDARD 150 - 200cm SeaPilot PILOT SUIT COLOURS: 290 Orange / 300 Fluorescent Yellow SIZES: XS-XXL SOLAS

SPIRO PIPES- Pipes & pipe units System groups: 196 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Our AERON® spiro pipe systems comes in uninsulated and preinsulated types, that complies

with EUROVENT 2.2 Class C specifications for tightness and withstands negative and positive pressure up to 3000 Pa. The preinsulated spiro pipes is made of galvanized steel sheet and insulated with 16mm mineral wool that provides an excellent guarantee against heat loss during the winter, and against condensation in the period of cooling all through the summer. The fittings and pipes are ready for easy assembling as the fittings are supplied with a sealed rubber-ring to ensure tightness. The uninsulated and preinsulated spiropipes can also be delivered in stainless steel, suitable for outdoor installation in offshore environments.

STAIRWAYS- Ladders, railings, stairs, ramps & gangways System groups: 52 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium Stairways are an integrated part of the Marine Aluminium Railing System. The stairways can be delivered as completed assemblies, designed and built to meet each customer’s unique requirements or have the stairway system built on site if preferred. Marine Aluminium’s flexible system designs make either option possible.

STARTERS- Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 79, 85, 867, 898

5-126_PR_2016.indd 108 07.08.2016 11:45:36

109


SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications.

STEAM BOILERS- Boilers, burners and incinerators System groups: 64, 641, 644 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat steam boilers. Capacity 750 - 25.000 kg/h. Parat oilfired steam boilers, exhaustì gas boilers or combined exhaust gas/oilfired steam boilers

STEAM GENERATORS- Heat exchangers & steam generation System groups: 64, 649 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat steam generators from 200 - 4.000 kg/h.

STEAM TRAPS- Evaporators, condensers and receivers System groups: 64 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

5-126_PR_2016.indd 109 07.08.2016 11:45:36


110

STIFF BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 32, 33 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Stiff Boom Crane Range from 22 mt to 3000 mt Exceptional power-to-weight ratio and mainability Slender design and additional winches Demountable crane booms simplify transportation

STOP VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve

- JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

STRAINERS- Fluid filters MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve

5-126_PR_2016.indd 110 07.08.2016 11:45:36

111


- Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

SUBSEA PUMPING SOLUTIONS- Subsea & seismic equipment System groups: 10 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PG-MAPS PG-MAPS Quad 1500 PG-MAPS Quad 1500 (Patent Pending) represent the most novel, low shear, high efficiency, positive displacement pumping solution currently presented to the market. Well Stimulation, Boosting, Scale Squeeze, Chemical Injection, Kill Mud, Drill Cuttings,

Water Injection and Sandaband a.s.o. are most relevant applications in the oil & gas sector

T AND H BEAM WELDING LINES- Welding & cutting equipment System groups: 191, 441 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com In co-operation with ESAB Welding Equipment AB, TTS offers a complete and efficient way of welding tailor-made beams and profiles. The lines are designed with economy and accuracy in mind, and can be delivered with additional equipment to suit special requirements for capacity and quality: .Welding of I-, T-, or L-beams, wide flange beams, columns, tapered beams or non-symmetrical beams with ESAB beam welder .Integrated handling equipment for mounting and handling of webs and flanges, as well as handling of ready welded profiles .Special sorting and handling cranes .Profile straightening .Inductive heat compensation .Surface treatment

5-126_PR_2016.indd 111 07.08.2016 11:45:36


112

TANK CLEANING MACHINES- Tank cleaning equipment System groups: 382 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com SC 15 TW Fixed SC 15 TW Portable tankcleaning systems specially developed for: Crude oill carriers Offshore Supply Vessels OBO carriers Product carriers Industrial applications Chemical carriers Bulk carriers Models SC 15 TW is media driven tankcleaning machines of twin nozzle type. SC 15 TW can be used either as portable machines on flexible hoses or as fixed submerged mounted machines. The machines can also be fixed installed on a extension pipe through the main deck.

TANK DRYING- Evaporators, condensers and receivers System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2

TANK GAUGING AND MEASUREMENTS- Cargo handling equipment System groups: 3 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Ballast and service tank gauging - Cargo monitoring and control system, K-Gauge - Crude oil interface Level Measurement system - Custody transfer system, K-Gauge CTS - Loading Computer system, C-Loading - Marine refit / Retrofit / Conversions - Radar based tank gauges - Tank overflow protection system

5-126_PR_2016.indd 112 07.08.2016 11:45:36

113


TANK HEATING SOLUTIONS- Tanks System groups: 641 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Tank Heating Solutions for Oil Spill Response Vessels Oil spill incidents are unplanned and unwanted events that can have dire consequences for the environment and fragile ecosystems around the globe. Fast response combined with the correct equipment able to cope with any type of hydrocarbon emulsion is vital to minimize the risk involved in extracting, processing and transporting petrochemicals outside our coastlines. Parat Halvorsen, in close cooperation with yards and ship owners, has developed a system that strengthens one vital part of the response value-chain in a very cost efficient way. A heating system that is fully integrated into the response vessels utility and heat recovery loop - and that in moments can be re-mobilized to deliver steam through specially engineered injection nozzles into the tanks that carry recovered hydrocarbons.

TANKCOATING- Coatings & paint System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Tankguard zink Tankguard dw Tankguard special ultra

TARPAULINS- Scaffolds, jigs & tarpaulins etc. System groups: 316 PLANY AS 6082 Gursken Telephone: +47 70 02 68 20 Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no De-Licing tarpaulins We deliver canvas-solutions with wide applications

TELESCOPIC BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 33 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com

5-126_PR_2016.indd 113 07.08.2016 11:45:37


114

Telescopic Boom Crane range from 20 mt to 3000 m - Flexible for outreach and close range - Compact parking position and operator convenience - Shorter cable lenghts ensure safe load handling at close rang

THERMAL OIL HEATERS- Heat exchangers & steam generation System groups: 648 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat thermal oil heaters. Output up to 7 MW.

THERMAL PROTECTION AID- Fire protection & detection equipment HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Ascotherm T.P.A. product line Ascotherm T.P.A. product line Ascotherm is currently one of the most successful designs of T.P.A. available today.

THRUSTER CONTROL, ALARM AND MONITORING SYSTEM- Control & automation systems System groups: 40 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no BRUCON The trusted Control, Alarm and Monitoring System from Brunvoll Control Brunvoll has built up decades of experience in reliable solutions for manoeuvring, positioning and propulsion control. Alarm Alerts and alarms give clear guidance for decision support. Early warnings enable quick intervention, reducing risks. Monitoring BruCon condition monitoring helps to optimize performance and makes it easier to plan smarter preventive maintenance. For Thrusters BruCon systems are specifically designed and produced for the entire range of Brunvoll thrusters. Main Propellers We provide complete control, monitoring and automation solutions for main propulsion equipment including azimuth systems from Brunvoll, and for main propulsion equipment from our strategic partners.

5-126_PR_2016.indd 114 07.08.2016 11:45:37

115


Drive Systems We supply BruCon for all our drive systems, including constant - / variable-speed CPP and FPP with frequency converters.

THRUSTERS- Thrusters and pods System groups: 404, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon

TOP FIRED WATER TUBE BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no PARAT MKS Marine Top Fired Water Tube Boiler The PARAT top fired water tube boiler is a fully automatic steam boiler.A sufficiently dimensioned steam drum makes the boiler suitable for evaporating steam from additional external exhaust gas boilers. The design and performance is a result of solid experience and high technical standards. The boiler is supplied with a circular furnace, constructed from membrane walls and convection sections with a combination of bare tubes and pin tubes. The heat flows cross sectional with a high flue gas velocity. With this unique design, both improved performance and reduced maintenance is achieved. The boiler fulfills the most stringent equipment standards and is available with certificates from all major class societies. Fittings and equipment are in accordance with class requirements. Our main equipment manufacturers supply high standard products. The steam atomizing burner can be supplied for oil, gas or dual fuel. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic and electric/pneumatic actuators. All operation from the boiler control panel is done from the local touch screen. Boiler PLC can be connected to the main control room with standard ethernet/profibus/modbus communication. Maintenance

5-126_PR_2016.indd 115 07.08.2016 11:45:37


116

and inspections can be carried out through large inspection doors. An automatic steam cleaning system is installed between the tube sections. The boiler is preassembled and delivered as complete unit incl. insulation and fittings.

TOPCOATS- Coatings & paint System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Hardtop AS - Shiny polyuret Paint with good color Hardtop AX Hardtop XP - Topcoat, shiny polyuretan with good color Hardtop Flexi - Topcoat, semi-gloss Hardtop Optima - Two-component polysiloxsan Topcoat Hardtop CA - two-component Hardtop Smart Pack - Topcoat for maintenance Pilot II - 1-component alkyd-based topcoat Pilot ACR - 1-component, quick-drying akryl-based Marathon - epoxy primer Marathon IQ - epoxy primer

TRANSFORMERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 865 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Wide range and type of transformers and reactors. THD - Filters Special applications.

TRANSMITTERS- Sensors, gauges & detectors KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Helideck Monitoring System - HMS 100 - Marine level switches - Marine pressure transmitters - Marine temperature sensors - Motion and heading sensor products - Radar based tank gauges - Sensor simulator WM-25 - Signal converters and zener barriers - Water ingress detection system - Wireless temperature monitoring for compressors - SENTRY

5-126_PR_2016.indd 116 07.08.2016 11:45:37

117


TRANSPORT SUITS- Lifesaving equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no SEAAIR OFFSHORE /TRANSPORT SUIT / IMMERSION SUIT COLOUR: 290 Orange SOLAS

TRAVELLING CRANES- Cranes, crane equipment, lifting devices & booms System groups: 3, 32 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Travelling cranes with a capacity from 50 t up to SWL - 600 For operations such as BOP/Christmas tree, pipe handling, or other specific tasks offshore - Available with special features like PLC programming, radio remote controls, design cabins, ATEX and IECEx approval

TUNNEL THRUSTERS- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no TUNNEL THRUSTERS Small or large - a comprehensive range of Tunnel Thrusters. We focus on developing ever more reliable, optimized and cost-effective systems . Refined continuously through 4 thruster generations We have delivered thousands of tunnel thrusters for fishing, cruise, naval, merchant and offshore vessels - a success story for generations. Standard & Customized Brunvoll offers a scope of supply to suit your needs. Our portfolio of in-house expertise enables us to develop effective solutions for challenging projects. Our design engineers work together with the yard’s hull design team to achieve cost-effective thruster installations.

5-126_PR_2016.indd 117 07.08.2016 11:45:37


118

UNDERWATER VEHICLES - AUV- Subsea & seismic equipment System groups: 414 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - HUGIN Autonomous underwater vehicles - REMUS Autonomous underwater vehicles - Underwater vehicle instruments - Launch and Recovery System - LARS for AUV and ROV - NavLab - Generic simulation and post-processing navigation software Commercial off the shelf We design and manufactures the REMUS and HUGIN product lines of commercial off the shelf (COTS) autonomous underwater vehicles (AUV). REMUS has been a tremendous success with more than 200 vehicles (2012) delivered. Remus vehicles are used in a wide number of applications including navies, hydrography and marine research. HUGIN AUVs boast operational experience from commercial and naval operations. Hugin operations have taken place in all parts of the world, in shallow to deep water, in arctic and tropical waters. REMUS and HUGIN vehicles have different capabilities and thus different applications and roles. They are available with short delivery times.

UV SYSTEM- Purification plants & fluid treatment System groups: 801 OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com The UV System was developed based on 20 years of experience in water injection on offshore platforms, water treatment for fish farming and drinking water plants in Norway.High power UV for the efficient killing or inactivation of organisms, bacteria and pathogens in ballast water. One UV lamp per chamber (167 m3/h flow rate per chamber). Standardized UV chamber, installed in parallel on a single manifold for higher flows. Developed and manufactured for installation aboard ships. Optimized for minimum maintenance and ease of operation. It is self-cleaning, with no moving parts or need for chemical cleaning. UV and temperature sensor in each chamber.

VACUUM PUMPS- Pumps & pump unitsSystem groups: 583 JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com VacuumaratorT pumps In-line installation of the VacuumaratorT pump combined with a small footprint and low weight allows for unique installation flexibility and considerable weight savings.

5-126_PR_2016.indd 118 07.08.2016 11:45:37

119


These advantages, along with low energy consumption, make JetsT the preferred choice for designers, yards and owners.

VACUUM TOILETS- Sanitary & waste equipment System groups: 583 JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com JetsT Vacuum Toilets A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience.

VACUUM VALVES- Air & gas valves MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a

new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

VALVES- Air & gas valves - Fluid valves & other armatures System groups: 3, 6, 7 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge.

5-126_PR_2016.indd 119 07.08.2016 11:45:37


120

Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Spjeldventiler og kuleventiler for sjøvann, oljeprodukter, kjemikalier med LPG og LNG.

VERTICAL PIN-TUBE BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no PARAT MPW Marine Vertical Pin-Tube Boiler The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.

5-126_PR_2016.indd 120 07.08.2016 11:45:37

121


VHF- Antennas & transmitters System groups: 411, 422, 424 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Comrod is a world leader in the design and manufacture of commercial marine antennas. All products are designed and manufactured to maintain exceptional performance while withstanding the rigours of the marine environment. Antennas are available covering the HF, maritime VHF, Cellular & Wireless LAN frequency bands. Multiband antennas are also available covering combinations of frequency bands.

WALL PANELS- Interior floor, wall & ceiling covers System groups: 511, 524 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium has developed, manufactured and supplied the Safety Wall Systems since 1984 and these systems have been supplied to most of the Oil & Gas installations in the North Sea. These systems are designed to meet the requirements of explosion blast relief, natural ventilation, weather protection and heat shielding. The construction material is seawater resistant aluminium. .Explosion blast relief .Natural ventilation

.Weather protection

.Heat shield (Stainless steel)

WALLS- Interior floor, wall & ceiling covers System groups: 511 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer. .

WATER TREATMENT- Purification plants & fluid treatment System groups: 584 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no

5-126_PR_2016.indd 121 07.08.2016 11:45:37


122

Leading supplier of technology for all kinds of water treatment - with special expertise in straining, filtration, disinfection and pumping techniques. Also including agitators and static mixers. ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.

WEATHER LOUVERS- Watertight/weathertight doors & windows System groups: 304, 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Humidity does more damage than most people realise. Humidity leads to corrosion which will shorten the lifespan of machinery, metal structures, electrical installations and electronic systems.

Installation onboard offshore platforms and various types of ships are often exposed to extreme environmental conditions. Louvers in general, particular the intake louvers, are often exposed to larger amounts of water from heavy rain, strong winds, green sea and water spray. To ensure the longevity of the louvers, but also to increase the lifespan and performance of machinery, electronic systems and more, a well dimensioned and high quality intake louver systems is always well invested money. AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks.

WEB WELDING LINES- Welding & cutting equipment System groups: 191, 441 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The TTS Web Welding Line is designed for welding smaller ship structure components such as webs and girders. Compared to manual pre-fabrication, an investment in a TTS welding line gives potential

5-126_PR_2016.indd 122 07.08.2016 11:45:37

123


improvements within the following areas: .Increased dimensional accuracy .Employ methods that reduces distortion .Dimensional accuracy allows the use of mechanized and robotized welding downstream .The components delivered from prefabrication to ship assembly are dimensional “accurate”. .Contributes to reduce assembly fit up time Improved working environment The line consists of a robot, which is mounted on a gantry together with the welding power source and the robot control system. The gantry travels on two rails placed on each side of the welding floor. All operations of the line are handled from the operator station placed on the shop floor, beside the rails.

WINCH BOLLARDS- Capstans, bollards & hawse holes System groups: 274, 33, 381, 432 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Winch Bollard: TTS Marine AS has developed a Winch Bollard mooring system, which makes mooring operations easier and safer than the more conventional systems currently available. The patended TTS Winch Bollard can replace mooring winches, capstans, warping drums and the bollards normally used for mooring. Basic features for Winch Bollard: .One man operated .Direct mooring without use of stoppers .Optimal and safe control during mooring .Control stand with a foot pedal .Integrated emergency stop and a flexible cable connection

.Easy controllable fail safe brakes

.Stepless speed control with high light line speed .Automatically reduction of line speed when the load is increased .Low noise during operation .Self lubricated bearings for low maintenance .Compact, clean and water resistant design

WINCH LINES- Anchor, pipe & cable handling equipment - Winches, drums & reels System groups: 274, 43 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no 6-STRAND KARAT® WINCHline combines the unique characteristics of the high strength KARAT®-fibres with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT® WINCHline is designed to be used on self tensioning winches and is DNV Type Approved. 6-STRAND BUOYANT WINCHlineT is a unique fibre rope with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHlineT is designed to be permanently floating and to be used on selftensioning winches.

5-126_PR_2016.indd 123 07.08.2016 11:45:37


124

WINCHES- Winches, drums & reels System groups: 33, 43 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Winches

WIND-SCREEN WIPERS- Bridge inventory & equipment System groups: 1 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Wind-Screen Wipers High quality custom-made wiper systems to meet any different installation requirement. The single blade mod. PG and twin blade mod. PGD straight line wipers, have been designed specifically for heavy duty applications either in naval or nautical sector. Straight line wiper are especially suited for very large windows aerea.

WIRE LUFFING LATTICE BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3, 33 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Slewing pedestal design with a load moment of up to 3000 mt - Fully electric crane available according to EN13852-1/NORSOK R-002 - Supplied with built in electro-hydraulic or diese-built in power pack - Meeting latest offshore rules and regulations and can be supplied with a variety of features in accordance with specific customer requirements

WIRE ROPE LUBRICATORS, HIGH PRESSURE- Lubricants System groups: 3, 4 MASTO WIRE SERVICE A/S 4688 Kristiansand S Telephone: +47 38 09 70 50 Telefax: +47 38 09 70 53 e-mail: [email protected] Internet: www.masto.no Distribution for the world-wide shipping marked: Wilhelmsen Ships Service (Unitor) together with Masto Wire Service A.S.

5-126_PR_2016.indd 124 07.08.2016 11:45:37

125


WIRE ROPE LUBRICATORS (high-pressure). For the shipping, offshore and industrial market. Produced in Norway. World-wide export

WORK/SURVIVAL SUITS- Personal equipment - Safety equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no E-300-2 WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XL SOLAS SEAMOB Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS SEAWORK Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS SEAWIND COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL SEAFISH Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS

WORKBOATS- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Munin 980 Workboats are now ready for delivery on 6 months notice. The boat has been developed in close cooperation with the major actor in seismic operations at sea. The product has more than fulfilled all the previous expectations for total performance in operation. This workboat is designed according to the DNV 2.21 Craft (April 2010) It is equipped with standard minimum equipment according to DNV Craft 2.21regulations. All equipment and outfitting are high quality components. The workboat is designed and outfitted for fulfilling the demands for reliability, low maintenance cost and long-time heavy use. The workboat has excellent reliability, manoeuvrability and sea keeping abilities in heavy sea in order to fulfil its prime function - to perform as an effective work platform. The boat is further designed to operate away from the mother ship for extended period, with sufficient range and long-time operation, with a high gunwale around the boat providing a protected and comfortable working environment for crew and passengers. The layout and performance of the boat allow it to perform roles as multi-purpose workboat, seismic workboat, towing boom, dive support, inspection- survey- and towingduties.

5-126_PR_2016.indd 125 07.08.2016 11:45:37


126

5-126_PR_2016.indd 126 07.08.2016 11:45:37

127

INDEX TO PRODUCT CATEGORIES Alphabetical

The present change in structure, as will be seen in this book, implies that products now are classified in a new component structure:

CBS - Component Breakdown Structure

In this system the products are sorted by type.

127-132_Index_CBS_2016.indd 127 07.08.2016 11:45:56

128

INDEX TO PRODUCT CATEGORIES AlphabeticalAC units, air dryers, air cooling and heating components ........150Accommodation modules .........................................................136Accommondation work (including carpentry, hvac) ..................194Accumulators, condensers, chargers & batteries .....................216Additives & agents ....................................................................244Administration, broking, finance & insurance services .............224Aggregates ...............................................................................258Air & gas valves ........................................................................152Air and gas treatment (dehydrators, air separators) .................153Air filters & spark arresters .......................................................154Air nozzles, jealousies and batteries ........................................154Alarm equipment ......................................................................160Aluminium .................................................................................244Anchor, pipe & cable handling equipment ................................272Anchors ....................................................................................206Antennas & transmitters ...........................................................250Anti-corrosion ...........................................................................244Anti-pollution equipment ...........................................................273Basic design & project development services ..........................224Bearings ...................................................................................258Bins, baskets, boxes and containers ........................................280Blasting & painting equipment ..................................................202Blocks & shackles.....................................................................206Boilers, burners and incinerators ..............................................294Brackets, bolts, fasteners and locking devices .........................282Brakes, couplings & shafts .......................................................258Bridge inventory & equipment ..................................................136Capstans, bollards & hawse holes ...........................................207Cargo handling equipment .......................................................273Centrals, consoles & panels .....................................................161Certification, Qa and verifivation services ................................225Chains, wires & ropes...............................................................208

127-132_Index_CBS_2016.indd 128 07.08.2016 11:45:56

129

INDEX TO PRODUCT CATEGORIES AlphabeticalChemicals ................................................................................245Cleaning equipment..................................................................137Coatings & paint .......................................................................245Combustion engine...................................................................259Compressors ............................................................................154Computer hardware ..................................................................162Connectors, sockets, plugs & distribution boxes ......................216Construction/fabrication software .............................................202Consumables............................................................................202Control & automation systems..................................................163Converters (voltage, frequency), receivers, el. dampers and rectifiers .................................................................................216Cooling components for fluids ..................................................299Cranes, crane equipment, lifting devices & booms ..................209Davits and masts ......................................................................282Detection & identification equipment ........................................251Diving equipment ......................................................................178Documentation & data management ........................................225Drilling equipment .....................................................................275Ducts, channels, trays and pipe support ..................................284Ejectors.....................................................................................230Electrical and electro work........................................................194Electrical heating ......................................................................218Electrical motors & starters.......................................................218Engineering services ................................................................226Engineering software (CAD, analysis) ......................................227Entertaining equipment.............................................................138Evaporators, condensers and receivers ...................................300Exhaust components & silencers .............................................259Fans..........................................................................................155Fenders & buoys ......................................................................212Fire protection & detection equipment ......................................178

127-132_Index_CBS_2016.indd 129 07.08.2016 11:45:56

130

INDEX TO PRODUCT CATEGORIES AlphabeticalFirefighting equipment ..............................................................178Fish farming equipment ............................................................275Fish processing equipment.......................................................275Fishing and hunting equipment ................................................276Fluid filters ................................................................................230Fluid nozzles & mixing batteries ...............................................232Fluid valves & other armatures .................................................233Freshwater generation..............................................................234Furniture & cabinets .................................................................138Galley, pantry equipment and whiteware ..................................141Gaskets, packings, liners & sealings ........................................260Gears ........................................................................................260Generators, alternators & dynamos..........................................262Gratings & drains ......................................................................284GRP/FRP ..................................................................................246Hatches, covers, ports, ramps & platforms...............................285Heat exchangers & steam generation ......................................301Helicopter deck equipment .......................................................276Hiring of rigs, platforms and ships ............................................195Hoses, drums, packings & fittings ............................................156Hospital & medical equipment ..................................................141Hydraulic motors & actuators ...................................................235Hydraulic plants & equipment ...................................................236Inert gas components, CO2......................................................156Inspection and testing (NDT, pressure, performance, trial trip, etc) ..........................195Inspections & testing equipment ..............................................202Insulation ..................................................................................246Interior doors & windows ..........................................................143Interior floor, wall & ceiling covers ............................................144Ladders, railings, stairs, ramps & gangways ............................286Lifeboats/rafts & other boats.....................................................182

127-132_Index_CBS_2016.indd 130 07.08.2016 11:45:56

131

Lifesaving equipment................................................................187Lifts, hoists & escalators ...........................................................146Lighting equipment & armatures...............................................220Lubricants .................................................................................247Machinery and piping work .......................................................195Maintenance, spare parts and supplies ....................................196Meters & indicators ...................................................................169Monitoring equipment ...............................................................170Onboard software .....................................................................172Other air/gas/pneumatic equipment .........................................157Other communication equipment..............................................252Other construction assistance (cleaning, rigging, stores, support) .................................................................................197Other electrical/electro equipment ............................................221Other engine & propulsion equipment ......................................264Other fluid transfer/treatment equipment ..................................236Other inventory .........................................................................146Other materials .........................................................................247Other nautical equipment .........................................................253Personal equipment..................................................................146Pipes & pipe units .....................................................................236Plastic .......................................................................................247Plates and profiles ....................................................................287Pneumatic actuators .................................................................157Positioning & navigation equipment .........................................253Power cables ............................................................................221Preheaters ................................................................................302Project management, construction management .....................227Propellers & impellers...............................................................265Pumps & pump units ................................................................237Purification plants & fluid treatment ..........................................239Radio & telephone communication ...........................................255

INDEX TO PRODUCT CATEGORIES Alphabetical

127-132_Index_CBS_2016.indd 131 07.08.2016 11:45:56

132

INDEX TO PRODUCT CATEGORIES AlphabeticalRegulators & switches ..............................................................172Repairs, modifications & docking .............................................198Safety equipment......................................................................189Sanitary & waste equipment .....................................................147Satellite communication............................................................255Scaffolds, jigs & tarpaulins etc. .................................................202Sections, foundations, pillars, structural units and bulkheads ..287Sensors, gauges & detectors ...................................................173Separators & traps....................................................................242Shipbuilding & offshore constructions ......................................199Signal cables & connectors ......................................................175Stainless steel ..........................................................................247Steel .........................................................................................248Steering equipment & stabilizers ..............................................267Structural work and surface treatment (plate, welder, paint) ....200Subsea & seismic equipment ...................................................277Switchboards & relays ..............................................................222Tank cleaning equipment ..........................................................302Tanks ........................................................................................302Thermal compensators .............................................................303Thrusters and pods...................................................................267Transport equipment ................................................................202Turbines & waterjet units ..........................................................269Vibration absorbers & dampeners ............................................269Watertight/weathertight doors & windows ................................288Welding & cutting equipment ....................................................203Winches, drums & reels............................................................212Workshop equipment ................................................................204

127-132_Index_CBS_2016.indd 132 07.08.2016 11:45:56

133

ACCOMMODATION EQUIPMENT PRODUCT CATEGORIES BY CBS

Component Brakedown System

133_304_CBS_2016.indd 133 07.08.2016 11:46:28

ACCOMMODATION EQUIPMENT

134

133_304_CBS_2016.indd 134 07.08.2016 11:46:28

135


Accommodation modules 136Bridge inventory & equipment 136Cleaning equipment 137Entertainment equipment 138Furniture & cabinets 138Galley, pantry equipment and whiteware 141Hospital & medical equipment 141Interior doors & windows 143Interior floor, wall & ceiling covers 144Lifts, hoists & Escalators 146Other inventory 146Personal equipment 146Sanitary & waste equipment 147

133_304_CBS_2016.indd 135 07.08.2016 11:46:28


136

ACCOMMODATION MODULESRelevant system groups:51, 512, 513, 514, 55, 583, 595 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no OFFSHORE MODULES Marine Aluminium can supply a wide range of custom built modules for various purposes such as: - Accommodation - Office space - Workshops - Containers - Storage Areas - Control Room Modules - Special purpose Modules - Heli-guard Areas - Helicopter Hangars Marine Aluminium can offer complete Living Quarter Extensions, also made with glass facades insulated to A60 fire class. These modules offer first class office or recreational areas on the offshore installations. The Modules can be supplied ready outfitted and insulated to any fire-rating. Low weight makes installation easier by reducing the amount of work required offshore. The modules can be fully outfitted and still be lifted using existing cranes on the installation. NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 ACCOMMODATION SYSTEMS WET UNITS

BRIDGE INVENTORY & EQUIPMENTRelevant system groups:1, 4, 417, 419, 43, 515, 541, 542, 548, 6, 7, 87, 951 ALU DESIGN & SERVICES AS 4636 Kristiansand Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Company brochures and datasheets are available on the Internet. CHAIRS, PILOT CHAIRS Think future Comfort No one else combines usability, functionality and innovation with this level of comfort. Our ergonomic expertise allows us to create chairs that become a seamless extension of the user - encapsulating them in an environment tailor made to maximize performance and minimize fatigue. Total control through absolute comfort. DECK RAILS Certified excellence Alu Design invests in a comprehensive programme of testing and certification. It is our aim to demonstrate that every one of our products is built with care, precision and quality, complying with the market’s most exacting standards. When you sit in an Alu Design chair you can relax, safe in the knowledge that there is simply no better seat.

133_304_CBS_2016.indd 136 07.08.2016 11:46:28

137


L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 BRIDGE CONTROL SYSTEMS NORSAP AS 4628 Kristiansand Telephone: +47-38 18 52 00 PILOT CHAIRS TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. WIND-SCREEN WIPERS Wind-Screen Wipers High quality custom-made wiper systems to meet any different installation requirement. The single blade mod. PG and twin blade mod. PGD straight line wipers, have been designed specifically for heavy duty applications either in naval or nautical sector. Straight line wiper are especially suited for very large windows aerea.

CLEANING EQUIPMENTRelevant system groups:123, 17, 196, 203, 401, 404, 442, 444, 551, 558, 582, 59, 62, 7 BEHA-HEDO INDUSTRIER AS 3702 Skien Telephone: +47 35 93 20 00 Telefax: +47 35 93 20 01 WASHING MACHINES CLEAN MARINE AS 1366 Lysaker Telephone: +47 21 04 33 11 EMISSION CLEANING SYSTEMS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com BALLAST WATER TREATMENT SYSTEMS Ballast Water Treatment System The Hyde Guardian BWTS offers an effective and reliable solution based on solids separation and UV irradiation. The Hyde Guardian system utilizes existing ballast pumps and piping. Standard systems are available for flow rates from 60m3/h up to 1500m3/h and customized systems up to 6000m3/h

133_304_CBS_2016.indd 137 07.08.2016 11:46:28


138

ENTERTAINMENT EQUIPMENTRelevant system groups:425, 446, 546 BAZE TECHNOLOGY AS NO-3905 Porsgrunn Telephone: +47 94 80 06 00 Telefax: +47 35 10 54 99 ENTERTAINMENT EQUIPMENT

FURNITURE & CABINETSRelevant system groups:10, 321, 446, 5, 51, 541, 542, 543, 548, 552, 553, 556, 558, 813 ALU DESIGN & SERVICES AS 4636 Kristiansand Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Company brochures and datasheets are available on the Internet. CHAIRS, PILOT CHAIRS Think future Comfort No one else combines usability, functionality and innovation with this level of comfort. Our ergonomic expertise allows us to create chairs that become a seamless extension of the user - encapsulating them in an environment tailor made to maximize performance and minimize fatigue. Total control through absolute comfort.

DECK RAILS Certified excellence Alu Design invests in a comprehensive programme of testing and certification. It is our aim to demonstrate that every one of our products is built with care, precision and quality, complying with the market’s most exacting standards. When you sit in an Alu Design chair you can relax, safe in the knowledge that there is simply no better seat. DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 STAINLES STEEL FURNISHMENTS EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Company brochures and datasheets are available on the Internet. FURNISHING Modulbaserte ”City” og ”Ideal” er hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder, tekstiler og farger er meget stor, det samme gjelder ben og vanger. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø eller nyhetene ”Stressless®City og ”Metro” ? Utforsk hele kolleksjonen i vår nye digitalkatalog.

133_304_CBS_2016.indd 138 07.08.2016 11:46:28

139


I tillegg leverer vi Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva. MATTRESS Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva SEATS Modulbaserte City er ett av våre hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder, tekstiler og farger er meget stor, det samme gjelder ben og vanger. Den er designlik med en av våre kjente Stressless® hvilestoler, Orion. Kombinasjonen er en kjent og kjær slager i mannskapsmiljøer verden over. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø? Utforsk hele kolleksjonen i vår nye digitalkatalog. LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet.

EQUIPMENT CABINETS The Libra equipment cabinet is available in many standard sizes and we also supply sizes in accordance with the customer’s requirements. Shelf arrangement (vertical or horizontal), heating, lighting, etc., are supplied in accordance with requirements and adjusted in each individual case. Main features: - Material: Fire retardant GRP - Low weight - Minimal maintenance - Central Closing Device - Corrosion- free - Layout/arrangement in accordance with requirements - Standard sizes + customized sizes on request - Double doors or roller front arrangement. - Standard colours: white, red or green - Side-by-side door arrangement or alternatively roller shutter MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Company brochures and datasheets are available on the Internet. MEDICINE CABINETS Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular

133_304_CBS_2016.indd 139 07.08.2016 11:46:28


140

vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use. MODELL MØBLER AS 4635 Kristiansand Telephone: +47 38 12 79 90 Telefax: +47 38 12 79 99 FURNITURES SEATS NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 FURNITURES VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet.

CABINETS LONG LIFE SPAN: Vestnes Produkt AS workshop cabinets are specially adapted to be used on-board ships and offshore. We have developed the cabinets in cooperation with users from ships and offshore installations. This has resulted in a high-quality product with exceptionally good utility value. The use of thick electrolytically galvanized panels means the cabinets have a very long life span. The cabinets can also be produces in acid-proof stainless steel. PRACTICAL SOLUTIONS Our cabinets are made from 1.25 mm thick panels, giving a high-quality finish. The sides, back, shelves and door frames are screwed together to ensure good stability and prevent rattling. The doors on our biggest cabinets have threepoint fastenings. The doors are assembled in an all-welded frame to prevent dust from getting in. The cabinets can be delivered without doors and with open shelves, which have a front lip to prevent objects falling out. The drawer shelves have a spot-welded lining and come withdrawer stops. All our models are made of electrolytically galvanized panels, have strengthened bases and are powder coated in colour RAL 9002 (light grey) FITTING The cabinets can be delivered pre-assembled by the manufacturer or in kit-form for the customer to assemble on board. A fitter form Vestnes is also available if required. All our cabinets come with assembly instructions. There are 12 standard layouts, but the cabinets can be installed as you wish. If you require internal fittings made to measure, we are happy to help. FURNITURES WILLY FURNITURE LINE: Together with the designers Ralston & Bau, we developed the Willy furniture line as we felt there was no furniture on the market that is especially made for the purpose to be installed in a ship. This environment requires furniture

133_304_CBS_2016.indd 140 07.08.2016 11:46:28

141


that has several functions in addition to look good and be modern. Together with designer, seamen and outfitters we came up with Willy. It has its inspiration from the Orca, the killer whale. See more under Advantages to read about the clients benefits when choosing Willy on their ship. Do also have a look on the pages describing our concept for choosing the colors for the furniture and the rest of the interior on a ship. New maritime furniture collection called “Willy”, inspired by the round shapes of the killer whale. Some of the most important in the design work was to find solutions that are flexible and simple to adapt to customers needs and wishes. Willy Maritime Furniture Collection is module based, this means it’s easy to assemble and to fit to the environment onboard. This ensures lower man-hours in the outfitting. We also create colour collections to simplify the choice for the customer, but we are also flexible to fulfil the customer’s needs

GALLEY, PANTRY EQUIPMENT AND WHITEWARERelevant system groups:362, 541, 551, 552, 553, 554, 558, 64, 841 BEHA-HEDO INDUSTRIER AS 3702 Skien Telephone: +47 35 93 20 00 Telefax: +47 35 93 20 01 COFFEE MACHINES DISHWASHING MACHINES ICE CUBE MACHINES MESS EQUIPMENT REFRIGERATORS WASHING MACHINES

TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. PROVISION STORAGE Teknotherm refrigeration plants for provision rooms are available as standard split systems or as factory assembled units forming a total package with necessary operation and stand-by system. Systems can also be delivered as central cooling/freezing machinery for refrigerators and catering equipment.

HOSPITAL & MEDICAL EQUIPMENTRelevant system groups:503, 504 MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Company brochures and datasheets are available on the Internet. EMERGENCY MEDICINE CARE MEDICAL EQUIPMENT, EMERGENCY A medical quality assurance tool coupled with telemedicine: ShipMed® Safety System ensures simple and safe operation of the ship’s hospital. The medical quality assurance tool lays the foundation for securing life and health on board

133_304_CBS_2016.indd 141 07.08.2016 11:46:28


142

and has been developed by medical personnel with long experience in ship medicine, in close cooperation with the maritime business, and according to Norwegian and International standards and regulations. ShipMed® Safety System assures the hospital stores and provides a full overview of the stock, expiry dates, distribution and purchase of medicines and medical equipment, as well as reports for stock, consumption and purchase. The software also provides a guide to use of medicines and medical equipment, a quick reference for medical equipment for different injuries and video clips showing various medical procedures. The quality assurance tool is available in Norwegian, English and Portuguese, and covers lists of ships medicine for a wide variety of flag states. Telemedical solution: ShipMed® Safety System offers an option for telemedical solutions on board ships through ShipMed® Premium membership. The solution is coupled to the quality assurance tool, and increases the likelihood of reaching a diagnosis and administering treatment quickly. It allows for contact between vessels and doctor on shore with moving images and sound, as well as transfer of medical data such as ECG, pictures and text. In that way, illness, pains and visible injuries can be properly described and communicated, and correct treatment or evacuation can start quickly FIRST AID EQUIPMENT HEART STARTERS MEDICAL EQUIPMENT MEDICINE CABINETS SHIP’S HEALTH SERVICE SHIP’S MEDICINE Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further

increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use. SHIP’S HOSPITALS ShipMed Hospital Well thought-out and functional solutions Medi 3 ShipMed AS offers project planning and delivery of complete interior solutions, medicine and medical equipment to the ship’s medical facilities. Our hospital solution is adapted to each vessel based on type of vessel, number of crew, flag and certification requirements. The ShipMed Design Tool enables us to contribute with solutions already in the project planning phase and presents 3D drawings of the recommended interior solutions for the ship’s hospital. With ShipMed Hospital our customers can be sure that the ship’s medical facilities are equipped to the right extent.

133_304_CBS_2016.indd 142 07.08.2016 11:46:28

143


INTERIOR DOORS & WINDOWSRelevant system groups:109, 51, 512, 513, 514, 515, 951 ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 DOORFRAMES WINDOW FRAMES LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. DOORS Watertight doors. Weathertight doors. Watertight and weathertight in A0 and A60. Spraytight bulkhead doors, insulated. Hatches, flush/raised NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 DOORS SHIPS’ WINDOWS

SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com INTERIOR FLOORS Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. DOORS TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden

133_304_CBS_2016.indd 143 07.08.2016 11:46:28


144

imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.

INTERIOR FLOOR, WALL & CEILING COVERSRelevant system groups:511, 524 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no WALL PANELS Marine Aluminium has developed, manufactured and supplied the Safety Wall Systems since 1984 and these systems have been supplied to most of the Oil & Gas installations in the North Sea. These systems are designed to meet the requirements of explosion blast relief, natural ventilation, weather protection and heat shielding. The construction material is seawater resistant aluminium. .Explosion blast relief .Natural ventilation .Weather protection .Heat shield (Stainless steel)

NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 CEILINGS WALLS OPTIMERA AS - MARINE DIV. 6155 Ørsta Telephone: +47 47 64 80 00 WALL PANELS SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Company brochures and datasheets are available on the Internet. DECK SELFSMOOTHING SCREED Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound

133_304_CBS_2016.indd 144 07.08.2016 11:46:28

145


VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. CEILINGS SHIP INTERIOR TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer. FLOOR COVERING Vestnes Ocean is the exclusive agent of STREAMO marine flooring range from Gerflor for the Norwegian maritime market. Gerflor creates, manufactures and markets innovative, design-led and eco-responsible solutions for flooring and complementary interior finishes. Gerflor is specifically developing new ranges for the maritime industry and has also certificates to deliver for both ships and offshore installations. Together with Vestnes Ocean`s Willy furniture, STREAMO floorings create a tasteful combination of colours and give an exclusive impression. Gerflor was actually the company that invented the homogeneous floorings

in 1937. After this it has been a continuous development of new products and designs. STREAMO collection for maritime market also offers a complete solutions of handrails, pvc skirtings and pvc stair nosings. The floor convering offer consists of wooden imitation range called Streamo Karavel, and homogeneous PVC floorings called Streamo Cruiser, Seacrosser, Mariner and Steamer. For more information about the STREAMO products, visit www.streamobygerflor.com WALLS TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer. .

133_304_CBS_2016.indd 145 07.08.2016 11:46:28


146

LIFTS, HOIST & ESCALATORSRelevant system groups:321, 34, 452, 56, 561 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. SHIPLIFT A shiplift enable your yard to launch end retrieve ships in a very time efficient and controlled manner. All winches are monitored by the control system and load cells to ensure load distribution within the design limits. By utilizing various type of hoist capacities and vary the spacings, different demands are met with regards to MDL, total capacity, platform size, etc. If a TTS rail trolleys are used as launching system, the trolleys can be left on the platform when submerged.

OTHER INVENTORYRelevant system groups:196, 446, 448, 54, 541, 543, 548, 7, 892

PERSONAL EQUIPMENTRelevant system groups:196, 403, 442, 50, 503, 505 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 SCREWS HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. LIFE JACKETS Life jackets SEALIFE LIFE JACKET SOLAS COLOUR: 290 ORANGE SEALIFE TP LIFE JACKET SOLAS COLOUR: 290 ORANGE SIZES: CHILD - ADULT SEALION Inflatable 150N OR 275N /SOLAS, HR SOLAS COLOUR: BLACK. SIZES: STD. PVC cover WORK/SURVIVAL SUITS E-300-2 WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XL SOLAS SEAMOB Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS

133_304_CBS_2016.indd 146 07.08.2016 11:46:28

147


SEAWORK Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS SEAWIND COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL SEAFISH Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS

SANITARY & WASTE EQUIPMENTRelevant system groups:442, 444, 445, 551, 58, 582, 583, 803 BEHA-HEDO INDUSTRIER AS 3702 Skien Telephone: +47 35 93 20 00 Telefax: +47 35 93 20 01 WASTE COMPACTORS DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 BATHROOM EQUPMENT SANITARY EQUIPMENT JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com

VACUUM TOILETS JetsT Vacuum Toilets A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience.

133_304_CBS_2016.indd 147 07.08.2016 11:46:28


148

133_304_CBS_2016.indd 148 07.08.2016 11:46:28

149


AIR, GAS & PNEUMATIC EQUIPMENT

AC units, air dryers, air cooling and heating components 150Air & gas valves 152Air and gas treatment (dehydrators, air separators) 153Air filters & spark arresters 154Air nozzles, jealousies and batteries 154Compressors 154Fans 155Hoses, drums, packings & fittings 156Inert gas components, CO2 156Other air/gas/pneumatic equipment 157Pneumatic actuators 157


133_304_CBS_2016.indd 149 07.08.2016 11:46:28


150

AC UNITS, AIR DRYERS, AIR COOLING AND HEATING COMPONENTSRelevant system groups:316, 362, 37, 433, 554, 57, 575, 601, 62, 651, 7, 73, 734, 89 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. AIR HANDLING UNITS AERON® air handling units are designed to satisfy HVAC requirements for all accommodation spaces onboard ships. We offer a flexible range of units. The units are made up of modules that enable us to deliver solutions tailor made to each vessel and ventilation room. Our products come in selections of single or dual-pipe units, low or high pressure units. AERON® Marine Air Handling Units: . are assembled from a wide range of standard sections . are available in 12 sizes up to 51000 m3/h . have very good acoustic and thermal insulation . can be delivered both as galvanised or stainless steel . are delivered with wave breakers and water traps

. fan and motor are mounted on vibration dampers with flexible connections AERON® Marine Air Handling Units are delivered with all necessary accessories in order to minimise installation work at the yard. The heat exchangers and evaporators can be delivered in any type of materials the customer demands. CABIN UNITS AERON® Marine Cabin Units and air terminals are designed for use in high speed marine air conditioning systems. Their task is to control the flow of air, its distribution and temperature. The units are tested for optimum performance. Important factors includes air throw, air induction, insulation capability and sound attenuation. We have a comprehensive range of Cabin Units. A range containing units for wall mounting or ceiling suspension, units for 1-pipe, 2 pipe, 1 pipe with reheat and a wide selection of air terminal units for low pressure systems. Air diffusers for the ceiling Cabin Units are available in square or circular shapes to fit ceiling panels. The Cabin Units is ready for easy and quick installation and may be delivered according to IMO resolution A.754 (18) for false ceilings with fire resistance rating B15. The units satisfies the Comfort Class requirements for noise, vibrations and indoor climate from Det Norske Veritas. REFRIGERATION PLANTS AERON´s range of refrigerating products will cover every need for refrigeration onboard modern ships and offshore installations. All refrigeration machineries and cooling products will be delivered according to requirements from yards, owners, classification society, and national authorities. Our refrigeration machineries are constructed for marine and offshore applications. Components and materials are chosen on the basis of our customers requirements and our long


133_304_CBS_2016.indd 150 07.08.2016 11:46:28

151


experience in the business. Emphasis is put on safety, energy efficiency, small dimensions, low weight and easy maintenance as well as site installation friendly solutions. The refrigeration plants can be delivered either as direct expansion systems or as chilled water plants for indirect cooling. Our plants can be delivered with aircooled or water cooled condensers, compressors for reciprocating or screw type systems, or as multi compressor units fitted with several compressors. Whatever the requirements, we will provide an optimal designed plant that meet your demands. Our refrigeration products may be delivered for ATEX or non ATEX areas. . Air cooled or water cooled Chilled water refrigeration units - CW. . Air cooled or water cooled Refrigeration units with Direct expansion - DX. . Air cooled or water cooled Split AC units for ATEX or non ATEX. . Fan coils for Chilled water or ATEX air-cooled refrigeration units. . Complete Provision room refrigeration systems. . Self Contained Units for return air or fresh air supply. . Compact Deck units with Air Handling Units and refrigeration units built together. . Taylor made cooling systems in ATEX or non ATEX. . Antenna cooling units ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. ADSORPTION DRYERS AIR DRYERS Tank drying equipment for chemical tankers. Cargo hold dehumidifiers

AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no MARINE AND OFFSHORE UPS AC and DC UPS solutions to ensure clean and secure power onboard. ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. REFRIGERATION SYSTEMS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 VENTILATION COWLS VENTILATION EQUIPMENT


133_304_CBS_2016.indd 151 07.08.2016 11:46:28


152

TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 ADSORPTION DRYERS AIR DRYERS TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. AIR CONDITIONING Teknotherm refrigeration plants for air-conditioning of accommodation, control rooms, etc. can be delivered either as direct expansion systems or as water chilling units for indirect cooling. According to the required capacity, or to your specific demands, our plants can be delivered with compressors of reciprocating- or screw type. Normally everything assembled to a condensing unit as comprise, compressor, condenser, electric motor and necessary auxiliary equipment.. COOLING SYSTEMS Broadly assortment to freezing systems for merchant fleet and fishing fleet. For the merchant fleet we deliver cooling- and freezing systems for: Solid and liquid cargo, provisions, aircondition, inert gas and CO2. For the fishing fleet we deliver freezing systems for cargo, RSW and various freezing equipment. Service. FREEZING SYSTEMS Freezing Systems Teknotherm has for years been a leading supplier of refrigeration systems to the world’s fishing fleet. Our wide range of products covers

any kind of refrigeration installation onboard a fishing vessel, both for freezing or cooling the catch at sea. REFRIGERATION, SPARE PART Compressors, condensers, evaporators, valves, pulleys and motors. All manufacturers but mainly Danfoss, Bock, Carrier, Frigidaire, Lehmkuhl, Mycom, Tecumseh and York. Also supplier of refrigerant plants. Service

AIR & GAS VALVESRelevant system groups:3, 309, 35, 354, 37, 375, 442, 477, 513, 57, 6, 601, 651, 7, 70, 71, 72, 73, 75, 79 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 BUTTERFLY VALVES CHECK VALVES GATE VALVES REDUCTION VALVES STOP VALVES MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. ANSI VALVES BUTTERFLY VALVES CHECK VALVES


133_304_CBS_2016.indd 152 07.08.2016 11:46:28

153


CONTROL VALVES DIAPHRAGM VALVES FIRE VALVES GATE VALVES JIS VALVES KNIFE GATE VALVES NEEDLE VALVES SAFETY VALVES SELFCLOSING VALVES STOP VALVES VACUUM VALVES VALVES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 VALVE EQUIPMENT WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Company brochures and datasheets are available on the Internet. BUTTERFLY VALVES Spjeldventiler for skip, offshore og petrokjemisk industri. VALVES Spjeldventiler og kuleventiler for sjøvann, oljeprodukter, kjemikalier med LPG og LNG.

AIR AND GAS TREATMENT (DEHYDRATORS, AIR SEPARATORS)Relevant system groups:355, 37, 445, 558, 57, 734, 75 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet.


133_304_CBS_2016.indd 153 07.08.2016 11:46:28


154

DEHUMIDIFIERS High relative humidity increases the risk of corrosion, mildew, rot and problems in electronics. Humidity reduction and control has proved to be the best and most cost efficient remedy against such damage. Alfsen og Gunderson AS has since 1965 presented leading solutions based on dry air technology and humidity control. - Tank drying equipment for chemical tankers. - Cargo hold dehumidifiers - AG Air Dryer for blasting and planting. - Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2

AIR FILTERS & SPARK ARRESTERSRelevant system groups:309, 37, 43, 442, 57, 6, 601, 646, 651, 7, 70, 73, 743, 744, 745 TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 FILTERS

AIR NOZZLES, JEALOUSIES AND BATTERIESRelevant system groups:401, 404, 62, 79 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com NOZZLES Nozzles for oil burners

COMPRESSORSRelevant system groups:362, 364, 505, 554, 601, 651, 73, 731 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 PRESSURE ALARM SYSTEMS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com


133_304_CBS_2016.indd 154 07.08.2016 11:46:29

155


COMPRESSORS Sundstrand International Corporation S.A, Belgium Centrifugal compressors and blowing machines. SPERRE INDUSTRI AS 6057 Ellingsøy Telephone: +47 70 16 11 00 COMPRESSORS TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 COMPRESSORS TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. COMPRESSORS Refrigeration compressors from: Mycom, Japan Grasso, The Netherlands York, United Kingdom/USA Carrier, USA Bock, Germany Hall, England RefComp, Italy Service.

FANSRelevant system groups:37, 374, 57, 575, 89, 897 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. AXIAL FANS Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes CENTRIFUGAL FANS Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution. FANS We are offering all types of fans needed to create an optimal ventilation system for marine and offshore applications. With requisite certificates according to class and governmental requirements. Axial Fans Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes at relative small pressure drops. Explosion- Proof Fans for Hazardous Area


133_304_CBS_2016.indd 155 07.08.2016 11:46:29


156

Hazardous areas onboard offshore rigs, chemical tankers, oil tankers and gas carriers, have very stringent requirements with regard to design and execution of the ventilation fans, concerning safety. We offer a wide range of special fans for installation in hazardous areas. Centrifugal Fans Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution. Dampers and Fire-dampers We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies. Silencers We deliver any type of square and circular high efficiency silencers. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 AXIAL FANS CENTRIFUGAL FANS DECK MOUNTING FANS FANS FANS, EXPLOSION PROOF GAS FREEING FANS MIST ELIMINATOR LOUVERS

HOSES, DRUMS, PACKINGS & FITTINGSRelevant system groups:196, 3, 344, 601, 651, 81, 813, 83, 88 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 FITTINGS KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 BULK HOSE SECURING UNITS

INERT GAS COMPONENTS, CO2 Relevant system groups:374, 376, 819 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. INERT GAS SYSTEMS Since the first installation in 1984, our design


133_304_CBS_2016.indd 156 07.08.2016 11:46:29

157


has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system. MARITIME PROTECTION AS 4620 Kristiansand Telephone: +47 908 15 987 Telefax: +47 38 01 10 25 INERT GAS SYSTEMS

OTHER AIR/GAS/PNEUMATIC EQUIPMENTRelevant system groups:196, 30, 35, 376, 381, 441, 504, 564, 57, 73, 734 TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 SCREW COMPRESSORS

PNEUMATIC ACTUATORSRelevant system groups:381, 601, 651, 79 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Company brochures and datasheets are available on the Internet. ACTUATORS Representing: Danaher Motion, Stockholm, Sweden: Linear actuation systems.


133_304_CBS_2016.indd 157 07.08.2016 11:46:29


158

ELTORQUE AS 7125 Vanvikan Telephone: +47-74 85 55 20 Telefax: +47-74 85 55 12 ACTUATORS MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se ACTUATORS We supply pneumatic double-acting or single-acting with spring return. The actuators are mainly quarterturn actuators for butterflyvalves and ball valves or multiturn for gate valves and globe valves. We also supply linear actuators for gate valves, knife gate valves and globe valves. SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 ACTUATORS


133_304_CBS_2016.indd 158 07.08.2016 11:46:29

159


AUTOMATION AND CONTROLAlarm equipment 160Centrals, consoles & panels 161Computer hardware 162Control & automation systems 163Meters & indicators 169Monitoring equipment 170Onboard software 172Regulators & switches 172Sensors, gauges & detectors 173Signal cables & connectors 175

AUTOMATION AND CONTROL

133_304_CBS_2016.indd 159 07.08.2016 11:46:29


160

ALARM EQUIPMENTRelevant system groups:109, 12, 14, 17, 20, 381, 40, 41, 42, 425, 542, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 797, 811, 85, 86, 865, 867, 87, 871, 872, 875, 88, 89, 898 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 GAS ALARM SYSTEMS OVERFILL ALARM SYSTEMS VOICE ALARM HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 ALARM & MONITORING SYSTEMS POWER MANAGEMENT HØGLUND MARINE AUTOMASJON AS 3150 Tolvsrød Telephone: +47 33 41 41 50 Telefax: +47 33 41 49 46 ALARM LOGGER KROHNE MARINE 3950 Breivik Telephone: +47 35 56 12 20 Telefax: +47 35 56 12 21 TANK ALARM SYSTEMS

MAS FLUID CONTROL AS 1301 Sandvika Telephone: +47 67 80 71 20 Telefax: +47 67 80 71 21 ALARM SYSTEMS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. AUTOMATION SYSTEMS www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering. CONTROL AND MONITORING SYSTEMS www.siemens.no/marine PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 LIFE CYCLE MANAGEMENT Life Cycle Management


133_304_CBS_2016.indd 160 07.08.2016 11:46:29

161


24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. SENSORS AND INSTRUMENTS www.siemens.no/marine Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators.

CENTRALS, CONSOLES & PANELSRelevant system groups:1, 109, 12, 25, 381, 40, 424, 427, 6, 60, 61, 62, 637, 638, 65, 651, 66, 7, 70, 71, 79, 791, 792, 793, 795, 811, 84, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 CONTROLING DESKS HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CONTROL PANELS LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. INSTRUMENT CONSOLES For bridge wings, winch control and other manoeuvring purposes


133_304_CBS_2016.indd 161 07.08.2016 11:46:29


162

Due to severe corrosion and paint problems with steel consoles, Libra has now developed GRP (Glassfibre Reinforced Polyester) consoles which completely solves these problems. They have the following features: - Fire retardant material - Corrosion- free - Solid GRP construction - Anti- magnetic - Low weight Standard colour RAL 9010 (other colours on request) Spraytight, hinged instrument cover Standard ext. colour, white RAL 9010 Steel fittings: Stainless steel AISI 316L SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions.

AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 CENTRAL HEATING SYSTEM

COMPUTER HARDWARERelevant system groups:109, 3, 381, 417, 444, 542, 792 KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 COMPUTER SYSTEMS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 COMPUTER SYSTEMS


133_304_CBS_2016.indd 162 07.08.2016 11:46:29

163


CONTROL & AUTOMATION SYSTEMSRelevant system groups:1, 109, 12, 14, 17, 196, 20, 3, 35, 375, 381, 40, 403, 41, 415, 42, 43, 464, 6, 60, 601, 61, 62, 63, 634, 637, 638, 64, 65, 651, 66, 7, 79, 791, 792, 793, 795, 797, 801, 811, 814, 85, 86, 861, 865, 867, 868, 87, 871, 872, 875, 88, 89, 898 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. AUTOMATION SYSTEMS CONTROL SYSTEMS To control the system we deliver everything from simple, virtually maintenance- free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.

AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 LEVEL ALARM SYSTEMS VAPOUR ALARM SYSTEMS BAZE TECHNOLOGY AS NO-3905 Porsgrunn Telephone: +47 94 80 06 00 Telefax: +47 35 10 54 99 INFOTAINMENT SYSTEMS MANAGEMENT OPERATION SYSTEMS BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no THRUSTER CONTROL, ALARM AND MONITORING SYSTEM BRUCON The trusted Control, Alarm and Monitoring System from Brunvoll Control Brunvoll has built up decades of experience in reliable solutions for manoeuvring, positioning and propulsion control. Alarm Alerts and alarms give clear guidance for decision support. Early warnings enable quick intervention, reducing risks. Monitoring BruCon condition monitoring helps to optimize performance and makes it easier to plan smarter preventive maintenance.


133_304_CBS_2016.indd 163 07.08.2016 11:46:29


164

For Thrusters BruCon systems are specifically designed and produced for the entire range of Brunvoll thrusters. Main Propellers We provide complete control, monitoring and automation solutions for main propulsion equipment including azimuth systems from Brunvoll, and for main propulsion equipment from our strategic partners. Drive Systems We supply BruCon for all our drive systems, including constant - / variable-speed CPP and FPP with frequency converters. ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 CONTROLING DESKS ELTORQUE AS 7125 Vanvikan Telephone: +47-74 85 55 20 Telefax: +47-74 85 55 12 CONTROL INTERFACES FLOW CONTROL SYSTEM FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. REMOTE CONTROL Remote Control Electronic remote control for control of gearboxes and cp-propeller systems. Remote

control systems of all types can be supplied, as a single panel for control of pitch and rpm to larger combinator controls and single lever joy-stick systems. Standard: . Pitch indication on all panels . Control of clutch In/Out from all remote stations . Alarms for control voltage failure and pitch feedback failure . Emergency control from main panel on bridge . Control position changeover between main and slave controls, with synchronisation of the control levers . Dimming of all lights and indicators on the bridge panels Optional: . Automatic overload control where rpm and fuel consumption are the main parameters . Propeller rpm indication HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 TANK LEVEL SYSTEMS HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CAMERA STATIONS, HAZARDOUS AREAS CAMERA STATIONS, SAFE AREAS CONTROL SYSTEMS DISPLAY UNITS HØGLUND MARINE AUTOMASJON AS 3150 Tolvsrød Telephone: +47 33 41 41 50 Telefax: +47 33 41 49 46 FUEL OIL CALCULATION SYSTEM


133_304_CBS_2016.indd 164 07.08.2016 11:46:29

165


POWER MANAGEMENT SYSTEMS PROCESS CONTROL SYSTEMS IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 AUTOMATION EQUIPMENT SSAS - SHIP SECURITY ALERT SYSTEM IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 AUTOMATION JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 DISPERSANT SYSTEMS JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 INTERCOM SYSTEMS PUBLIC ADDRESS SYSTEM SOUND RECEPTION SYSTEMS KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 CONTROL SYSTEMS

KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com BRIDGE SYSTEMS Product groups - Automatic identification systems - AIS - Dynamic positioning - DP systems - Electronic logbooks, K-Log - Fleet Management Software - Integrated workstations - Joystick control system - Marine refit / Retrofit / Conversions - Navigator safety system - Position and reference systems - Radar and navigation systems - Ship information systems - Thruster control system - Voyage data recorders ENGINE ROOM SYSTEMS Product groups - Electronic logbooks, K-Log - Engine monitoring systems - Fleet Management Software - Marine automation systems - Marine refit / Retrofit / Conversions - Marine switchboards - Process control systems, K-Pro - Propulsion control systems - Safety system, K-Safe - Ship information systems NAVAL SYSTEMS Product groups - Naval Sonar - Portable Integrated Navigation Systems - Underwater Noise Measurement - Waterside Security SAFETY SYSTEMS Product groups - Fleet Management Software - Navigator safety system - Safety system, K-Safe


133_304_CBS_2016.indd 165 07.08.2016 11:46:29


166

- Voyage data recorders - Waterside Security SIMULATORS Product groups - Dynamic positioning simulators - E-Learning system - Engine room simulator - GMDSS simulator - Liquid cargo handling simulator - Offshore Vessel Simulator - Ships bridge simulators - Thermal power plant simulator - VTS - Vessel traffic services simulator - Crane simulators KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex REFERENCE SYSTEMS SpotTrack laser-based reference system SpotTrack is primarily used as a reference system for relative positioning in DP operations. The SpotTrack sensor is a robust motion stabilised rotating laser sensor which measures range and bearing to one or several retro-reflective targets installed on the target platform or vessel. Automatic wave motion stabilisation provides optimum target lock. The onboard HMI unit allows for easy configuration and monitoring of the SpotTrack system. L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 AUTOMATION EQUIPMENT PLATFORM MANAGEMENT SYSTEM

LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no JOYSTICK Norways larges manufacturer of Control Levers. Supplier to leading system manufacturers all over the world. -Control lever: Type LF50, Joystick -Control lever: Type LF60, Joystick - multi-axis joysticks. MAS FLUID CONTROL AS 1301 Sandvika Telephone: +47 67 80 71 20 Telefax: +47 67 80 71 21 AUTOMATION OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com CONTROL SYSTEM The Ballast Control System allows easy operation of the Optimarin Ballast System.User-friendly interface. - Touch screen operation. - Interface with ship’s main systems. - Logging in accordance with IMO requirements. - Option of integrating ballast pumps and valves.


133_304_CBS_2016.indd 166 07.08.2016 11:46:29

167


PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com HIGH TEMP/HIGH VISCOCITY SYSTEMS Asphalt- / Bitumen- Liquid Pitch Pumps Twin-screw pumps Special design twin-screw pumps for handling of high temp./high viscocity liquids such as Molten Sulphur, Asphalt, Bitumen, Liquid Pitc Tar a.s.o. Heated, quensched and speed-controlled cargo pumps SCANA MAR-EL AS 3880 Dalen Telephone: +47-35 07 58 00 CONTROL SYSTEMS JOYSTICK CONTROL SYSTEMS PROPULSION CONTROL SYSTEMS THRUSTER REMOTE CONTROL, ELECTRONIC SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 HYDRAULIC CONTROLS VALVE REMOTE CONTROL SYSTEM SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet.

AUTOMATION SYSTEMS www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering. CONTROL AND MONITORING SYSTEMS www.siemens.no/marine PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 GENERATORS www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness.


133_304_CBS_2016.indd 167 07.08.2016 11:46:29


168

Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. SENSORS AND INSTRUMENTS www.siemens.no/marine Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications.

TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. CAMERA SYSTEMS Camera Systems For any operation onboard a vessel a high quality camera monitor system is an added value. Whether being used for a view of the engine, deck areas or Heli deck, a camera system will give the operator an overview of all operations in one view. With the possibility of choosing between a fixed, zoom or pan & tilt zoom camera observation; the right type of camera can be selected for any of the processes. CONTROL STATIONS Control Stations Tranberg control stations with various numbers and types of pushbuttons, lamps etc.enableflexible sizes and solutions. Only using Stainless Steel AISI 316 and fully compliant with the latest ATEX/IECEx and NORSOK standards. ENCLOSURE SYSTEMS Tranberg develops, manufactures and distributes: ENCLOSURE SYSTEMS Junction boxes/Instrument enclosures Cable glands Panel building Switches & Distribution systems HEATING SYSTEMS Heating Complete heating solutions from individual components to complete heat tracing systems for offshore and onshore applications.


133_304_CBS_2016.indd 168 07.08.2016 11:46:29

169


METERS & INDICATORSRelevant system groups:109, 12, 151, 3, 35, 351, 381, 40, 403, 41, 415, 417, 442, 503, 554, 6, 60, 61, 62, 637, 638, 65, 651, 66, 7, 70, 701, 71, 72, 761, 79, 791, 792, 793, 795, 797, 80, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 CALIBRATION EQUIPMENT KROHNE MARINE 3950 Breivik Telephone: +47 35 56 12 20 Telefax: +47 35 56 12 21 FLOWMETERS KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 SHAFT-TORQUE-METERS MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no

CALIBRATION EQUIPMENT MATRE Calibrators Matre calibration equipment is designed for the adjustment of thermostats and pressure-switches. The intention is to meet the demands and needs by the classifying authorities regarding the calibration of sensors in unmanned engine rooms. Common to all Matre calibrators is that they are very easy to use, dependable and easily portable. Matre Calibrators have obtained great recognition and are delivered to ship and yards worldwide. SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions.


133_304_CBS_2016.indd 169 07.08.2016 11:46:29


170

AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.

MONITORING EQUIPMENTRelevant system groups:109, 12, 14, 17, 192, 20, 30, 35, 38, 381, 40, 41, 414, 416, 417, 42, 423, 43, 53, 6, 60, 61, 62, 637, 638, 65, 651, 66, 7, 79, 791, 792, 793, 795, 797, 803, 815, 85, 86, 861, 865, 867, 87, 871, 872, 875, 88, 89, 898 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 LEVEL ALARM SYSTEMS WATER INGRESS ALARM SYSTEMS HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 ALARM & MONITORING SYSTEMS POWER MANAGEMENT HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CCTV

IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 THERMO CAMERAS KROHNE MARINE 3950 Breivik Telephone: +47 35 56 12 20 Telefax: +47 35 56 12 21 MONITORING OF BUNKERING MONITORING OF FUEL CONSUMPTION TANK MONITORING SYSTEMS KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 CONDITION MONITORING SYSTEMS L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00Telefax: +47 32 21 17 87 MONITORING EQUIPMENT LIGHT STRUCTURES AS 0667 Oslo Telephone: +47 23 89 71 33 MONITORING SYSTEMS MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 WAVE MONITORING SYSTEMS


133_304_CBS_2016.indd 170 07.08.2016 11:46:29

171


PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com FUEL CONSUMPTION MONITORING PD Volummeters The accuracy of the KRAL Volumeter is unmatched. Our meters are accurate to within ±0,1 % of rate over a wide range of flow and viscosity. The reproducibility is better than ±0,01 %. With excellent service life and long-term stability, this clearly shows that sturdiness and precision are not mutually exclusive. Nine European standards laboratories used a KRAL Volumeter for a calibration intercomparison. With results beyond expectations, the report suggests using our device as the default transfer standard between kerosene laboratories SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ALARM SYSTEMS AUTOMATION SYSTEMS www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering. CONTROL AND MONITORING SYSTEMS www.siemens.no/marine

PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. SENSORS AND INSTRUMENTS www.siemens.no/marine


133_304_CBS_2016.indd 171 07.08.2016 11:46:29


172

Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators. SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 MONITORING SYSTEMS

ONBOARD SOFTWARERelevant system groups:109, 381, 415, 42, 542, 63, 79, 792 KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 COMPUTER SYSTEMS SEAGULL MARITIME AS 3194 Horten Telephone: +47 33 03 0910 Telefax: +47 33 04 62 79 SOFTWARE STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 COMPUTER SYSTEMS MAINTENANCE MANAGEMENT SAFETY MANAGEMENT SYSTEMS

REGULATORS & SWITCHESRelevant system groups:109, 12, 309, 381, 40, 438, 439, 442, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 7, 70, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. PUMP UNITS Transport pump units Pumps and equipment IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 PRESSURE SWITCHES LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no CONTROL LEVERS Norways largest manufacturer of Control Levers. Supplier to leading


133_304_CBS_2016.indd 172 07.08.2016 11:46:29

173


system manufacturers all over the world. -Control lever: Type LF 50, Joystick -Control lever: Type LF 60, Joystick -Control lever: Type LF 70, to operate azimuth propellers -Control lever: Type LF 80, Rudder control -Control lever: Type LF 90, to operate propulsion and thrusters -Control lever: Type LF 120, for maoeuvering of propulsion and thruster unit -Control lever: LF 150, steering wheel -Control lever: Type LF 180, for manueuvering of propulsion units - simple, one-axis control levers in different sizes, hand wheels, rudder controls, azimuth control units and multi-axis joysticks SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used

to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.

SENSORS, GAUGES & DETECTORS Relevant system groups:109, 12, 151, 3, 35, 381, 40, 411, 442, 46, 554, 6, 60, 61, 62, 637, 638, 64, 65, 651, 66, 7, 70, 703, 71, 72, 761, 79, 791, 792, 793, 794, 795, 797, 8, 803, 811, 815, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 FIRE DETECTION SYSTEMS TEMPERATURE ALARM SYSTEMS IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 GAS DETECTORS PRESSURE TRANSMITTERS TEMPERATURE SWITCHES


133_304_CBS_2016.indd 173 07.08.2016 11:46:30


174

KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com SENSORS TRANSMITTERS Product groups - Helideck Monitoring System - HMS 100 - Marine level switches - Marine pressure transmitters - Marine temperature sensors - Motion and heading sensor products - Radar based tank gauges - Sensor simulator WM-25 - Signal converters and zener barriers - Water ingress detection system - Wireless temperature monitoring for compressors - SENTRY KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex SENSORS The ultimate marine motion sensor The MRU is suitable for any maritime operation that requires attitude determination and motion compensation. Kongsberg’s range of motion sensors provides high accuracy motion measurements in all dynamic environments. They cover all marine activities, from small hydrographic vessels to large vessels and installations. Typical applications for MRUs . Motion compensation of single and multi-beam echo sounders . Orientation and attitude measurements on AUVs and ROVs . High speed craft motion control and damping systems

. Heave compensation of offshore cranes

. Dynamic positioning

. Hydro acoustic positioning

. Ship motion monitoring

. Ocean wave measurements

. Antenna motion compensation and stabilization SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.


133_304_CBS_2016.indd 174 07.08.2016 11:46:30

175


SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 CATCH MONITORING SENSORS

SIGNAL CABLES & CONNECTORSRelevant system groups:382, 423, 70, 79, 85, 87, 88


133_304_CBS_2016.indd 175 07.08.2016 11:46:30


176


133_304_CBS_2016.indd 176 07.08.2016 11:46:30

177


BOATS, LIFESAVING, SAFETY & FIREFIGHTING EQUIPMENT

Diving equipment 178Fire protection & detection equipment 178Firefighting equipment 178Lifeboats/rafts & other boats 182Lifesaving equipment 187Safety equipment 189

BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT

133_304_CBS_2016.indd 177 07.08.2016 11:46:30


178

DIVING EQUIPMENTRelevant system groups:483

FIRE PROTECTION & DETECTION EQUIPMENTRelevant system groups:196, 298, 374, 376, 381, 425, 505, 51, 511, 515, 57, 64, 79, 792, 797, 811, 813, 816, 817, 818 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 FIRE DETECTION SYSTEMS GLAVA AS 1801 Askim Telephone: +47 69 81 84 00 Telefax: +47 69 81 84 78 FIRE INSULATION

HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. THERMAL PROTECTION AID Ascotherm T.P.A. product line Ascotherm T.P.A. product line Ascotherm is currently one of the most successful designs of T.P.A. available today. NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 FIRE RATED WINDOWS

FIREFIGHTING EQUIPMENTRelevant system groups:376, 421, 505, 57, 81, 813, 816, 818, 819 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. INERT GAS SYSTEMS Since the first installation in 1984, our design has undergone excessive standardization,


133_304_CBS_2016.indd 178 07.08.2016 11:46:30

179


minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system. AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 FIRE EXTINGUISHING INSTALLATIONS FIRE-FIGHTING EQUIPMENT WATERFOG SYSTEMS DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 FIRE-FIGHTING EQUIPMENT SPRINKLER SYSTEMS

FIRE FIGHTING SYSTEMS AS 1597 Moss Telephone: +47 69 24 49 90 Telefax: +47 69 24 49 95 FIRE-FIGHTING SYSTEMS JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 FIRE MONITORS FIREFIGHTING SYSTEMS TELESCOPIC MASTS KUMERA AS 3202 Sandefjord Telephone: +47-33 48 54 54 FIRE FIGHTING EQUIPMENT MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no Company brochures and datasheets are available on the Internet. FIRE FIGHTING SYSTEMS DIFFS / NUI MATRE Deck Integrated Fire Fighting System (DIFFS) Matre Deck Integrated Fire Fighting System (DIFFS) - specially developed to extinguish fire on helidecks. An activated DIFFS system will extinguish a major spill fire on the helideck within 15 seconds. Although - tests have shown that such fires in most cases are extinguished in less than 10 seconds.


133_304_CBS_2016.indd 179 07.08.2016 11:46:30


180

Matre DIFFS can be automatically activated by detection system or manually by release panels (push buttons). Rescue personnel can safely perform rescue operations on the helideck even when the system is fully activated. Matre DIFFS can be used on many various installations and can be customized according to customer specifications. Today Matre DIFFS is used on various offshore installations as well as yachts and roof top helidecks. DIFFS consist of foam mixing skid and Matre pop-up nozzles. Matre DIFFS is designed in compliance to all applicable standards and regulations (CAP437, NORMAM27, ICAO, NMD, NORSOK). Matre Systems for Normally Unattended Installations: Normally Unattended Installations (NUI) can now be equipped with Matre’s Deck Integrated Fire Fighting System (DIFFS) or Ring Main System (RMS). Today NUI present their own problems when helicopters have to land on installations with only rudimentary firefighting equipment. This is set to change as the CAA (Civil Aviation Authority) now demands better safety for helicopter movements on NUI. CAP 437, Standard for Offshore Helicopter Landing Areas, states the following in chapter 5.3 appendix D that: “DIFFS on NUIs should be integrated with platform safety systems such that pop-up nozzles are activated automatically in the event of an impact of a helicopter on the helideck where a Post-Crash Fire (PCF) is a foreseeable outcome. The overall design of a DIFFS should incorporate a method of fire detection and be configured to avoid spurious activation. It should be capable of manual over-ride by the HLO and from the mother installation or from an onshore control room. Similar to a DIFFS provided for

a Permanently Attended Installation (PAI) or vessel, a DIFFS provided on an NUI needs to consider the eventuality that one or more nozzles may be rendered ineffective by, for example, a crash. The basic performance assumptions stated in paragraphs 2.10 to 2.12 should also apply for a DIFFS located on an NUI.” FIRE-FIGHTING EQUIPMENT PROPORTIONERS MATRE Foam Proportioning Equipment Matre has since the late eighties delivered specially designed foam proportioner for use on industrial, marine and offshore installations. Product development and a strong focus on safety and accuracy has led to our range of products. These are often preferred in projects where flexibility and quality are crucial for the result. The reliability of the foam proportioning system is essential in order to guarantee an effective operation. Matre offers a wide range of proportioner models and sizes. We strive to be able to deliver and meet our customer’s challenges with proven equipment and solutions. Our desire as a complete supplier of foam proportioner is to be in front with new development and to ensure that we at all times can deliver reliable, cost effective solutions to the industry. We aim to keep our position as a leading supplier of high quality foam proportioning equipment. Data Sheets: Please follow the link: http://www.matre.no/products


133_304_CBS_2016.indd 180 07.08.2016 11:46:30

181


MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. FIRE VALVES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve

WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no Company brochures and datasheets are available on the Internet. FIRE FIGHTING SYSTEMS A Norwegian based company, developing and producing all types of active fire fighting systems. WME also carries out research and development of Water Mist Nozzles and systems. WME performs: . Site study . Design . Engineering . Fabrication . Testing . Installation . Commissioning/Start-up Our working areas cover Oil & Gas, Petrochemical, Offshore & Marine Industry as well as Air Craft Hangars and Building market. Our commitment to excellence is based on a deep and wide experience in both Fire Engineering and Water Mist Technology. Our well-trained staff have backgrounds in the North Sea Offshore area. Among our staff you will find Fire Cybernetics and Machine Engineers. When you purchase WME products you are buying the finest fire fighting equipment possible. Our well-trained and experienced project staff will execute your order in the most professional way.


133_304_CBS_2016.indd 181 07.08.2016 11:46:30


182

LIFEBOATS/RAFTS & OTHER BOATSRelevant system groups:443, 501, 502, 503 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. LIFEBOATS Free-fall Offshore: Harding offers freefall systems for use in offshore applications and merchant vessels. We apply our vast experience from the North Sea into the research and development of our products. Therefore, we are able to offer you the most sophisticated and safest freefall systems in the industry today. FF1200 (70p): The FF1200 is a 70 person freefall lifeboat specifically designed to meet the latest regulations on the Norwegian Continental Shelf in the North Sea, way beyond SOLAS rules for freefall lifeboats. Free-fall Shipping: The Harding LBF-serie of free-fall lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo. All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and the electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI

316, depending on how exposed the equipment is. Notifying body: Bureau Veritas (others on request) Totally enclosed lifeboats: Harding’s totally enclosed lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo. All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI 316, depending on equipment exposure. Notifying body: Bureau Veritas (others on request) Harding lifeboats are certified with the latest LSA Code as amended With New hooks approved according resolution MSC.320 (89) and resolution MSC.321 (89) RESCUE BOATS Harding offers a new range of rescue boat systems for offshore applications, merchant and passenger vessels. Our special designs ensure great stability and optimal working conditions on the vessel in rough sea conditions. We deliver rescue boats with petrol engine or diesel inboard engine. All boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). RRB: Harding’s rigid rescue boats have a special design that ensures great stability, as the outer and inner hulls are shaped in separate moulds. The buoyancy tank provides sufficient buoyancy to keep the boat afloat when flooded and fully manned. The boat can be delivered with or without an engine.


133_304_CBS_2016.indd 182 07.08.2016 11:46:30

183


We deliver rescue boats with petrol engine or diesel inboard engine. The boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). Harding fast rescue boats: Harding’s fast rescue boats can be supplied with both outboard petrol and inboard diesel engines. The boats have high-speed hulls, achieving speed up to 35 knots. Our fast rescue boats have hydraulic steering as standard. The robust GRP frame ensures good self-righting abilities, and large drain valves in the stern ensure drainage from the deck. The boats are equipped with high-quality navigation lights and switch panels (IP 56). Fast rescue boat in aluminum For rough usage under tough conditions Harding can also provide Fast rescue boats fitted with aluminum hull.The hull is designed for speed and stability, which means optimal working conditions on the vessel in rough sea conditions. The boat achieves speed up to 35 knots. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. ALUMINIUM BOATS High-speed boats in MP-design, Seabear, Alusafe and Weedo. Body sizes 5 - 25 metre. MOB BOATS Marketing of mob-boats in MP-design, Seabear, ALusafe and Weedo. Service, repairs and upgrade of all types.

RESCUE BOATS Sale of boats in MP-design, Seabear, Alusafe and Weedo. Workshop for rescue- and work boats. NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. DAUGHTER CRAFTS Norsafe has a wide range of daughter craft designed to operate away from the mother ship or offshore installations for extended periods of time. The primary function is to search for and rescue persons lost at sea. Effective search and recovery require a fast rescue craft with excellent reliability, manoeuvreability and sea keeping abilities. Combining these functions, Norsafe boats are suitable for all types of marine SAR missions. The daughter craft are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. We have daughter craft which fully comply according to current IMO requirements and all equipment has been approved in accordance with latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review.


133_304_CBS_2016.indd 183 07.08.2016 11:46:30


184

Norsafe as reserves the right to change specification without prior notice. FREE FALL LIFEBOATS Norsafe Free-fall lifeboats (GES - Gravity Escape System) have an optimal design and a large number of ships and offshore installations are equipped with our free-fall lifeboats. The benefits are clear: rapid evacuation in emergencies, the boat slides out from a ramp onboard the ship/installation, and hits the water well away from the ship or installation with a high vertical forward motion. Passengers are safe and secure in an enclosed cabin, securely fastened to anatomically shaped seats. The lifeboat system is robust and can withstand high winds, powerful waves and extreme weather conditions. The boats can be fitted with a water spray and compressed air system for protection against fire. Advantages with freefall-system: - Maximum distance from installation - Position to water entry point - Positive forward motion after water entry - Good guidance during initial phase of drop giving stability during free fall phase - Well-proven system designed for large heel/trim angles - Robust system against heavy wind and waves from any direction Our largest boats can withstand drops from great heights up to 47m and are highly space efficient. We supply davits specially designed for our free-fall lifeboats and can adapt davits to suit all onboard conditions. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC-labeled in accordance with the Marine Equipment Directive. Our lifeboat systems also meet the new DNV-OS-E406 standard for Norwegian waters as required from 2015.

Typical specifications - are subject to revision according to customer requirements. All products are subject to continuous review. Norsafe AS reserves the right to change specifications without prior notice. LIFEBOATS Norsafe conventional lifeboats are used all over the world, both on ships and offshore installations. The smallest boats in the lifeboat range are approved both as lifeboats and rescue boats. Our largest totally enclosed lifeboat (TELB) has a capacity for 136 people and is the largest on the market. The boats are double skinned, with foam buoyancy injected into the space between the inner and outer elements. The boats also have dedicated buoyancy tanks. This means that the boats are unsinkable, even if they become damaged or in a fully flooded condition. The craft has a positive stability up to 180º and is self-righting both when it is intact and in flooded conditions. The steering rudder nozzle has been specially designed to give maximum thrust from the propeller. The lifeboat system is robust and can easily withstand the powerful winds and high waves associated with extreme weather conditions. The boats are equipped with on-load lifting hooks that are controlled from a release handle mounted at the steering position. Hooks will release simultaneously when the craft is fully waterborne. All Norsafe conventional lifeboats can be delivered with Norsafe’s new TOR MKII Hook Release System. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. The hull, superstructure, buoyant tanks, water and provision containers are all made of fire-retardant GRP. Our lifeboat


133_304_CBS_2016.indd 184 07.08.2016 11:46:30

185


systems also meet the new NORSOK R-002 standard required for Norwegian waters from 2015. The lifeboat’s hooks will release simultaneously when the craft is fully waterborne. Emergency release of the hooks is possible but the system is secured against accidental release. The fire protecting spray system pump takes seawater from the lowest possible location under the boat. The spray system provides water over the entire surface of the craft (1,200 l/min). The compressed air system has sufficient capacity to provide air for the maximum number of personnel and engine combustion for a minimum of 10 minutes. The over-pressure inside the boat prevents ingress of toxic fumes or gas. Provisions have been made to recharge the air system from the ship’s compressed air system. MILITARY & PROFESSIONAL Norsafe has a wide range of boats for military and professional use, and attention is paid to guarantee the highest quality. Only the best craftsmanship, components and materials are used. The boats are specially designed to operate away from shore or the mother ship for extended periods of time. Combining superb seaworthiness, manoeuvrability and high speed, the boats are ideal for all types of assistance, patrols and other special applications. The layout and performance of the boats allow wide ranging functions, including operations in hostile areas. Undetectable and task flexible The boats have a low freeboard, a sprayhood specially designed for boarding, an anti-slip deck surface. They are self-bailing, have ample deck space, a self-righting system and a sturdy foam-fi lled fender. Radar waves pass through fi breglass, giving the boats an inherent stealth capability. This combined with very little use of aluminium or steel helps reduce the overall radar signature.

For many users failure of the equipment is not - and cannot be - an option. The boats operating in the “no-failure-zone” can be equipped with a mechanical override control system for the engine electronics. Even if all on board engine electronics are heavily damaged or should fail completely, this system allows for the engines to be manually and mechanically run. Further, Norsafe can provide boats with full redundancy, where the motor, power train and all support functions are fully isolated within the craft. This ensures a safe return for the crew to land or to the mothership. Approved by authorities The boats are designed, built and equipped to comply with SOLAS regulations or similar national regulations. Other codes and certifi cation modules can be supplied. All boats are specially designed and constructed to meet the need for fully available, low maintenance, standby and operation. Following fabrication, all Norsafe boats are fully Factory Acceptance Tested (FAT) to ensure the boat performance and on board systems are fully functioning according to standard test procedures and the agreed specifi cation for the equipment. Customers are welcome to attend FAT and sea trials at Norsafe’s factory which has easy ocean access. Tailor made solutions One of the advantages for Norsafe customers is our design fl exibility, making it possible to build boats specifi cally intended to meet client requirements. Since our fi rst deliveries of professional boats all craft have been purpose equipped for specifi c tasks. Norsafe work closely with the customer to understand the requirements and produce concepts most suitable for the purpose the boats are intended for. Usually inboard diesel engines are fitted - these can be driven by waterjet, stern or surface drives. Petrol outboard motors can also be installed if preferred. Norsafe offer single, twin


133_304_CBS_2016.indd 185 07.08.2016 11:46:30


186

or triple engine installations. This wide range of propulsion options gives a wide spectrum of operation - from shallow river or coastal operations to high speed offshore use. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice. RESCUE BOATS Norsafe has the market’s widest range of rescue boats and daughter craft for ships, offshore installations, the coastguard service, police and other rescue services. Combining superb seaworthiness, maneuverability and speed, our boats are ideal for all types of rescue, patrols and other general applications. The boats are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit or outboard petrol engines. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. In accordance with current IMO regulations, all RO-RO Pax vessels must have fast rescue boats with a minimum length of 6 m and a top speed of at least 20 knots. We have boats which fully comply with these requirements and all equipment has been approved in accordance with latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice.

WORKBOATS Munin 980 Workboats are now ready for delivery on 6 months notice. The boat has been developed in close cooperation with the major actor in seismic operations at sea. The product has more than fulfilled all the previous expectations for total performance in operation. This workboat is designed according to the DNV 2.21 Craft (April 2010) It is equipped with standard minimum equipment according to DNV Craft 2.21regulations. All equipment and outfitting are high quality components. The workboat is designed and outfitted for fulfilling the demands for reliability, low maintenance cost and long-time heavy use. The workboat has excellent reliability, manoeuvrability and sea keeping abilities in heavy sea in order to fulfil its prime function - to perform as an effective work platform. The boat is further designed to operate away from the mother ship for extended period, with sufficient range and long-time operation, with a high gunwale around the boat providing a protected and comfortable working environment for crew and passengers. The layout and performance of the boat allow it to perform roles as multi-purpose workboat, seismic workboat, towing boom, dive support, inspection- survey- and towingduties. SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info MOB BOATS MOB boats


133_304_CBS_2016.indd 186 07.08.2016 11:46:30

187


LIFESAVING EQUIPMENTRelevant system groups:196, 422, 48, 50, 501, 502, 503, 505 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 SCREWS HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. IMMERSION SUITS E-307 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD. & XXL SeaEco N6 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD. & XXL SeaEco+ N6 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: M ,STD. & XXL SeaNordic SEANORDIC IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD., M & XXL

SeaArctic IMMERSION SUIT ARCTIC OFFSHORE SOLAS COLOUR: 290 Orange SIZES: STD. & XL LIFE JACKETS Life jackets SEALIFE LIFE JACKET SOLAS COLOUR: 290 ORANGE SEALIFE TP LIFE JACKET SOLAS COLOUR: 290 ORANGE SIZES: CHILD - ADULT SEALION Inflatable 150N OR 275N /SOLAS, HR SOLAS COLOUR: BLACK. SIZES: STD. PVC cover PASSENGER SUITS SeaPass SEAPASS PASSENGER SUIT SOLAS COLOUR: 200 Fluorescent Orange SIZES: 50-100cm / 100-150cm / 150-200cm SPECIAL SUITS SeaRescue RESCUE MAN SUIT COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL NAVY QUICK DONNING / ANTI EXPOSURE SUIT COLOUR: 290 Orange SIZES: STANDARD 150 - 200cm SeaPilot PILOT SUIT COLOURS: 290 Orange / 300 Fluorescent Yellow SIZES: XS-XXL SOLAS TRANSPORT SUITS SEAAIR OFFSHORE /TRANSPORT SUIT / IMMERSION SUIT COLOUR: 290 Orange SOLAS


133_304_CBS_2016.indd 187 07.08.2016 11:46:30


188

HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. RESCUE BOATS Harding offers a new range of rescue boat systems for offshore applications, merchant and passenger vessels. Our special designs ensure great stability and optimal working conditions on the vessel in rough sea conditions. We deliver rescue boats with petrol engine or diesel inboard engine. All boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). RRB: Harding’s rigid rescue boats have a special design that ensures great stability, as the outer and inner hulls are shaped in separate moulds. The buoyancy tank provides sufficient buoyancy to keep the boat afloat when flooded and fully manned. The boat can be delivered with or without an engine. We deliver rescue boats with petrol engine or diesel inboard engine. The boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). Harding fast rescue boats: Harding’s fast rescue boats can be supplied with both outboard petrol and inboard diesel engines. The boats have high-speed hulls, achieving speed up to 35 knots. Our fast rescue boats have hydraulic steering as standard. The robust GRP frame ensures good self-righting abilities, and large drain valves in the stern ensure drainage from

the deck. The boats are equipped with high-quality navigation lights and switch panels (IP 56). Fast rescue boat in aluminum For rough usage under tough conditions Harding can also provide Fast rescue boats fitted with aluminum hull.The hull is designed for speed and stability, which means optimal working conditions on the vessel in rough sea conditions. The boat achieves speed up to 35 knots. LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Outline Specification proposals are available on the Internet. LIFE JACKET CONTAINERS - Low weight - Minimal maintenance - Stainless steel hasps - Hot galvanized steel supports - Ventilated MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. LIFE-SAVING EQUIPMENT Marine rescue and safety epuipment. Lifesaving equipment for standby rescue vessels. Package deliveries.


133_304_CBS_2016.indd 188 07.08.2016 11:46:30

189


RESTECH NORWAY A/S 8001 Bodø Telephone: +47-75 54 24 40 LINE THROWING APPARATUS

SAFETY EQUIPMENTRelevant system groups:109, 412, 417, 421, 422, 423, 448, 503, 505, 564, 891, 892 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 EMERGENCY LIGHT HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. IMMERSION SUITS E-307 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD. & XXL SeaEco N6 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD. & XXL SeaEco+ N6 - IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: M ,STD. & XXL

SeaNordic SEANORDIC IMMERSION SUIT SOLAS COLOUR: 290 Orange SIZES: STD., M & XXL SeaArctic IMMERSION SUIT ARCTIC OFFSHORE SOLAS COLOUR: 290 Orange SIZES: STD. & XL WORK/SURVIVAL SUITS E-300-2 WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XL SOLAS SEAMOB Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS SEAWORK Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS SEAWIND COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL SEAFISH Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 AIS (AUTOMATIC IDENTIFICATION SYSTEMS) GMDSS JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80


133_304_CBS_2016.indd 189 07.08.2016 11:46:30


190

AIS (AUTOMATIC IDENTIFICATION SYSTEMS) KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex AIS (AUTOMATIC IDENTIFICATION SYSTEMS) - AIS Onboard In accordance with IMO requirements all SOLAS ships in international traffic above 300 gross tons must have Automatic Identification Systems (AIS) installed onboard. We offer a wide range of different AIS for use onboard ships (AIS mobile stations) tailored to different requirements. All mobile stations are in accordance with the IMO regulations. AIS Infrastructure We provide a full range of AIS infrastructure used for shore-side and platform based AIS infrastructure. Our long record of supplying AIS infrastructure, GPS reference networks and EGNOS monitoring systems has provided us with the competence needed to undertake AIS projects of all types. We are an active member of IEC, ITU and IALA. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. SAFETY EQUIPMENT Marine rescue and safety equipment. Lifesaving equipment to standby rescue vessels. Package deliveries.

NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. HOOK SYSTEMS As a response to industry concerns, Norsafe has undertaken an extensive process to improve release gear for lifeboats. This targets safety issues, especially the avoidance of a premature release. Our new TOR MKII Hook Release System has been developed and built according to the new regulations MSC.1/Circ.1392 and MSC.1/Circ.1393, IMO resolution MSC.320(89) and IMO resolution MSC.321(89). New hook systems installed after July 1, 2014 must comply with these new regulations, and all non-compliant hook systems must be replaced before July 1, 2019. Norsafe Service stations are currently carrying out re-hooking projects worldwide. Norsafe is proud to present the new TOR MKII Hook concept, a further development on the long proven TOR MKI Hook. The new hook is intrinsically safer and includes safety devices required by operators and regulators. It has already been well received by Norsafe’s key customers and is probably the safest hook on the market. The TOR MKII Hook has been designed specifically for simplicity of use and clearly understandable operation. The yellow padlock, clearly visible on both sides of the hook - indicates that the hook is set and release cables correctly located. The locking mechanism of the new TOR MKII Hook is such that securing pins through the hook (as a locking device or set indicator) and fall preventers are not necessary.


133_304_CBS_2016.indd 190 07.08.2016 11:46:30

191


SCANA MAR-EL AS 3880 Dalen Telephone: +47-35 07 58 00 EMERGENCY TELEGRAPH STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 SAFETY MANAGEMENT SYSTEMS


133_304_CBS_2016.indd 191 07.08.2016 11:46:30


192


133_304_CBS_2016.indd 192 07.08.2016 11:46:30

193


CONSTRUCTION & OPERATION SERVICES

Accommondation work (including carpentry, hvac) 194Electrical and electro work 194Hiring of rigs, platforms and ships 195Inspection and testing (NDT, pressure, performance, trialtrip, etc. 195Machinery and piping work 195Maintenance, spare parts and supplies 196Other construction assistance (cleaning, rigging, stores,support) 197Repairs, modifications & docking 198Shipbuilding & offshore constructions 199Structural work and surface treatment (plate, welder,paint) 200


133_304_CBS_2016.indd 193 07.08.2016 11:46:30


194

ACCOMMODATION WORK (INCLUDING CARPENTRY, HVAC)Relevant system groups:51, 54, 541, 57, 583 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. HVAC AERON® ATEX Products for Cooling of Hazardous Areas AERON® Antenna Cooling Units The AERON® range of HVAC-R cooling products for hazardous areas is ATEX compliant, reliable and suitable for location within or in connection with hazardous areas. Our ATEX product ranges complies with the ATEX directive and consist of both standard products and products tailor made to our customers’ requirements and operation environments. Our long experience in the marked and continuing developments of ATEX products, has led us to be one of the leading companies in cooling for hazardous areas in the marine and offshore business.

MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no HVAC Marine Aluminium has delivered HVAC products/solutions for decades. Our product range includes shafts, water separating inlet louvers, louver housing, dampers and hatches. The best protection and longevity for customer’’s ventilation systems is achieved by high efficiency separating performance and the use of seawater resistant aluminium. The solutions offered can be designed to fit the customer’s requirements.

ELECTRICAL AND ELECTRO WORKRelevant system groups:41, 42, 423, 66, 79, 811, 85, 86, 87, 88, 89 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com ELECTRICAL ANTI-ICE/DE-ICE As the world market leader we provide tailor made solutions certified by DNV-GL. Delivered to more than 60 projects worldwide. ELECTRICAL INSTALLATION EQUIPMENT Installation Equipment Tranberg’s installation equipment is made to reduce installation and maintenance costs for yard andship-owner. Using only cast brass and stainless steel, manufactured to the highest standards.


133_304_CBS_2016.indd 194 07.08.2016 11:46:31

195


HIRING OF RIGS, PLATFORMS AND SHIPSRelevant system groups:101, 17

INSPECTION AND TESTING (NDT, PRESSURE, PERFORMANCE, TRIAL TRIP, ETC)Relevant system groups:109, 112, 151, 17, 375, 44, 442, 443, 6, 793, 8 KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 PERFORMANCE TESTING

MACHINERY AND PIPING WORKRelevant system groups:196, 202, 3, 40, 58, 6, 63, 634, 635, 64, 7, 8 BERGEN PLASTICS RUBBER SOLUTIONS AS 5852 Bergen Telephone: +47 55 92 57 20 Telefax: +47 55 92 57 49 METAL MACHINING IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 MACHINING PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. BOILER REPAIRING Boiler repairing. PARAT has an extensive and continuously expanding global service and repair network. Through strategic partnerships we are able to serve our clients at almost any port around the world on short notice. We can perform repairs, modifications and upgrades both at port and during transit.


133_304_CBS_2016.indd 195 07.08.2016 11:46:31


196

All inquiries should be directed to our head office with 24 hour service. E-mail: [email protected] We are present with representatives or branch offices in the following countries: . USA . Brazil . United Kingdom . Namibia . Korea . Portugal . China . Denmark

MAINTENANCE, SPARE PARTS AND SUPPLIESRelevant system groups:101, 109, 17, 196, 309, 356, 443, 445, 601, 651, 70, 71, 8 STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 MAINTENANCE MANAGEMENT TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Company brochures and datasheets are available on the Internet. EJECTORS Ejectors E-mail: [email protected] Phone: +47 37 19 98 00

TeamTec Stripping Ejectors - reliable and indispensable jet pumps. TeamTec has more than 50 years experience with production of stripping ejectors, and has supplied over 75 000 units worldwide. The stripping ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. TeamTec Stripping Ejectors are superior for all-purpose stripping and have become an important part of the standard equipment on modern new buildings. The main areas of application for the TeamTec Stripping Ejectors are stripping of cargo tanks, ballast water tanks, cargo holds, engine rooms and bilge, vacuum cleaning engine rooms, as well as emergency stripping. With a combination of high quality material and skillful construction TeamTec supplies effective solutions to meet onboard requirements. Other TeamTec ejector types and products related to specific purposes: i.e. mud mixing, degassing, vacuuming and evacuation of air, gas. TeamTec’s design and production of ejector types is flexible in accordance with the customer’s requests. The TeamTec Stripping Ejectors are produced in Ni-Al-Bz, stainless steel and super duplex. INCINERATORS Incinerator E-mail: [email protected] Phone: +47 37 19 98 00 Spare Parts E-mail: [email protected] Phone: +47 37 19 98 00 Service E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Incinerators - safe and efficient waste management: TeamTec AS is a leading manufacturer of incinerators, with more than 11,000 units sold worldwide since 1972. The TeamTec Incinerators provide safe and efficient waste management, which complies with the IMO


133_304_CBS_2016.indd 196 07.08.2016 11:46:31

197


regulations for both waste oil and solid waste incineration. TeamTec supplies a wide range of incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts. TeamTec Bilge water injection solutions: TeamTec water injection system for the TeamTec Incinerators is an efficient and automated disposal system for contaminated water. The system reduces operating issues related to OWS, increase sludge burning capacity and reduce NOX emissions. Older incinerator models can easily be upgraded with TeamTec’s certified water injection upgrading kit. TeamTec After Sales - worldwide service and spare parts: TeamTec provides comprehensive after sales service for all TeamTec products worldwide: spare parts, commissioning, repair service, pre-installation survey, service agreements, training and general technical support.

OTHER CONSTRUCTION ASSISTANCE (CLEANING, RIGGING, STORES, SUPPORT)Relevant system groups:101, 17, 203, 33, 45 LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no PRECISION MECHANICS Lilaas AS manufacture precision mechanics, details, assembled units and system solutions. The company is well known as a creative partner for ideas and problem solutions on different fields. Our highly skilled workers manage 15 CNC-controlled machines. The limit of tolerance is 0,004 mm, using among other machines, Mazak Integrex 200 for optimum complete machining and Kitamura H300SL with 200 tools and 40 palettes. Our production is based on our own or customer documentation, and is highly effective, with general integration between machinery, CAD and CAM software.


133_304_CBS_2016.indd 197 07.08.2016 11:46:31


198

REPAIRS, MODIFICATIONS & DOCKINGRelevant system groups:144, 17, 414, 443 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. DOCKING SUPPORT ARMS TTS Docking support arms can be incorporated into the TTS Transfer System, or be delivered as individual units to be placed, for example, in a drydock. The docking support arms consists of a basic cradle design with a keel blocks and hydraulically operated tilting arms. The tilting arms have wooden bilge blocks gimbaling at the end. This support conforms to the shape of the hull. During docking, the tilting arms rise and press on to the hull with a minor force of one metric tons, while they resist the force of 50 metric tons. When the ship is dry, the arm is secured with a bolt. The TTS Docking Support arms are operated from a mobile hydraulic power pack. .TTS Docking Suppport Arms can significantly increase your docking capacity by increasing the docking productivity .The systems saves human power and gives the ship an exact docking position DOCKLIFT Building ring units or blocks weighing some 1,200-2,000 tonnes, instead of blocks weighing 2-400 tonnes, will significantly reduce the building time in dock. The docklift concept is

based on assembling 2-400 tonnes blocks into ring units weighing up to 2,000 tonnes. DUAL WALKING BEAM (DWB) The Dual Walking Beam (DWB) units are individual working machines, completely self-contained. They are simultaneously or individually controlled by one operator with a portable hand held control station. .A trackless Transfer System for Ship Sections .Smaller Ships and Heavy Loads .Load range: 200 tonnes up to 12.000 tonnes MULTIWHEELERS TTS can offer a cost effective, high quality, series of multiwheelers/block transporters. The standard programme is from 75 to 520 ton pay load. The system allows movement in all directions. Two vehicles might be operated simultaneously by the same driver in tandem operation, either in hard connection (platform to platform) or soft connection (signal cable). Driver cabinet on each side makes the operation easier, as well as possibility for wireless remote control. Tailor made versions are also possible on request. PANELL PRODUCTION LINES Since our first Panel Production Line delivery in 1977, TTS has delivered more than 60 Panel Production Lines to shipyards worldwide. Our solutions have in many cases been developed in co-operation with demanding customers, enabling us to build up a unique know-how of the technological challenges facing the industry’s production area. Different solutions for different requirements In order to fulfil the complexity of requirements related to production volumes, material dimensions, workshop sizes and layouts, material flow, investment and payback considerations and capacity, we offer a range of Panel Production Line solutions that


133_304_CBS_2016.indd 198 07.08.2016 11:46:31

199


can be customised to any shipyard. Our Module Based Designs offer stepwise investment TTS offers modular solutions in order to accommodate yards with limited investment budgets or need for stepwise increase of panel production capacity. Thus, a Panel Production Line can be installed as a complete unit or as individual sections purchased over time. In either case, the final result is the same - a significant improvement in productivity. Attractive return on investment Due to our ability to deliver a range of options - from relatively low-tech mechanical solutions to highly automated and heavy duty solutions - our customers, ranging from small, specialised yards to large high-volume yards, experience attractive return on investment through significant improvement in productivity, capacity and quality. POWERED WHEEL TRANSPORTER (PWT) The PWT-system is a module based transfer system, developed for fast and flexible moving of ships. A sophisticated control system enables movement in all directions, at the time being easy and user-friendly to operate. The system’s flexibility makes it possible to solve all common transfer operation and cope with different load, MDL, width, blocking length etc. Several safety features help the operator to perform the transfer according to modern safety standards. The PWT-system gives excellent access to the hull/trestle and has low requirement to ground conditions. The power unit(s) might be built-in in each module, every second/third module or as a separate unit. Available payload per unit is from 90 ton to 450ton.

SHIP HANDLING TROLLEY (SHT) Ship Handling Trolley (SHT) is further cost efficient development of TTS’ well known rail trolley. Tyre wheels make the rails needless and enable the operator to move the ship “anywhere” in the yard. Like all other TTS transfer Systems fluid bed system gives full control of peak loads and load levelling properties. Each trolley has a payload of 150ton SWL and can be arranged differently depending on the load distribution and total load.

SHIPBUILDING & OFFSHORE CONSTRUCTIONSRelevant system groups:1, 14, 17, 2, 20, 381, 41, 42, 79, 88


133_304_CBS_2016.indd 199 07.08.2016 11:46:31


200

STRUCTURAL WORK AND SURFACE TREATMENT (PLATE, WELDER, PAINT)Relevant system groups:2, 203, 27, 28, 401, 404, 442, 445, 52, 53, 62 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. BOW EQUIPMENT Bow Equipment For vessels requiring bow access, TTS offers bow equipment designed to meet the demands of maritime safety. A great number of vessels have been successfully equipped with bow doors of side-swinging type combined with the TTS patented Folding Frame bow ramp solution


133_304_CBS_2016.indd 200 07.08.2016 11:46:31

201


CONSTRUCTION/FABRICATION EQUIPMENT & SOFTWARE

Blasting & painting equipment 202Construction/fabrication software 202Consumables 202Inspections & testing equipment 202Scaffolds, jigs & tarpaulins etc. 202Transport equipment 202Welding & cutting equipment 203Workshop equipment 204

CONSTRUCTION/FABRICATION EQUIPMENT& SOFTWARE

133_304_CBS_2016.indd 201 07.08.2016 11:46:31


202

BLASTING & PAINTING EQUIPMENTRelevant system groups:203, 27, 443, 444

CONSTRUCTION/FABRICATION SOFTWARERelevant system groups:10, 101, 109, 11, 12, 121, 381, 542, 792 STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 PURCHASING SYSTEMS

CONSUMABLESRelevant system groups:196, 89

INSPECTIONS & TESTING EQUIPMENTRelevant system groups:112, 15, 442, 481, 6, 64, 7

SCAFFOLDS, JIGS & TARPAULINS ETC.Relevant system groups:316, 443 PLANY AS 6082 Gursken Telephone: +47 70 02 68 20 Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no Company brochures and datasheets are available on the Internet. CANVAS PRODUCTS Plany heavy-duty canvas .Any size or colour .Experience .Tailormade .Customized after customer needs TARPAULINS De-Licing tarpaulins We deliver canvas-solutions with wide applications

TRANSPORT EQUIPMENTRelevant system groups:3, 32, 321, 322


133_304_CBS_2016.indd 202 07.08.2016 11:46:31

203


WELDING & CUTTING EQUIPMENTRelevant system groups:191, 441 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 WELDING EQUPMENT IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 LASER CUTTING TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. T AND H BEAM WELDING LINES In co-operation with ESAB Welding Equipment AB, TTS offers a complete and efficient way of welding tailor-made beams and profiles. The lines are designed with economy and accuracy in mind, and can be delivered with additional equipment to suit special requirements for capacity and quality: .Welding of I-, T-, or L-beams, wide flange beams, columns, tapered beams or non-symmetrical beams with ESAB beam welder .Integrated handling equipment for mounting and handling of webs and flanges, as well as

handling of ready welded profiles .Special sorting and handling cranes .Profile straightening .Inductive heat compensation .Surface treatment WEB WELDING LINES The TTS Web Welding Line is designed for welding smaller ship structure components such as webs and girders. Compared to manual pre-fabrication, an investment in a TTS welding line gives potential improvements within the following areas: .Increased dimensional accuracy .Employ methods that reduces distortion .Dimensional accuracy allows the use of mechanized and robotized welding downstream .The components delivered from prefabrication to ship assembly are dimensional “accurate”. .Contributes to reduce assembly fit up time Improved working environment The line consists of a robot, which is mounted on a gantry together with the welding power source and the robot control system. The gantry travels on two rails placed on each side of the welding floor. All operations of the line are handled from the operator station placed on the shop floor, beside the rails.


133_304_CBS_2016.indd 203 07.08.2016 11:46:31


204

WORKSHOP EQUIPMENTRelevant system groups:121, 123, 196, 282, 421, 423, 424, 44, 441, 442, 443, 444, 446, 481, 505, 541, 542 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 ELECTRICAL TOOLS HAND TOOLS SCREWS TOOLS DALSEIDE SHIPPING SERVICES AS 5397 Bekkjarvik Telephone: +47-56 18 12 00 Telefax: +47-53 18 12 01 CHIPPING HAMMERS COMPRESSED AIR TOOLS RUST SCALING HAMMERS IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 CALIBRATION EQUIPMENT MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no

CALIBRATION EQUIPMENT MATRE Calibrators Matre calibration equipment is designed for the adjustment of thermostats and pressure-switches. The intention is to meet the demands and needs by the classifying authorities regarding the calibration of sensors in unmanned engine rooms. Common to all Matre calibrators is that they are very easy to use, dependable and easily portable. Matre Calibrators have obtained great recognition and are delivered to ship and yards worldwide.


133_304_CBS_2016.indd 204 07.08.2016 11:46:31

205


DECK MACHINERY & EQUIPMENTAnchors 206Blocks & shackles 206Capstans, bollards & hawse holes 207Chains, wires & ropes 208Cranes, crane equipment, lifting devices & booms 209Fenders & buoys 212Winches, drums & reels 212

DECK MACHINERY & EQUIPMENT

133_304_CBS_2016.indd 205 07.08.2016 11:46:31


206

ANCHORSRelevant system groups:274, 327, 4, 43, 431, 434, 582 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. ANCHORS Anchors in all sizes in stock.

BLOCKS & SHACKLESRelevant system groups:274, 32, 327, 344, 4, 43, 434, 436, 437 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. FAIRLEAD SHACKLES Mandal Fairlead Shackle - Stainless steel mooring shackle with sleek shape designed to pass through fairleads. Available in two sizes 90 M and 120 M.

HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. HOOKS Harding offer a complete range of new high quality generation hooks that come directly from the frontline of product development, techniques and regulations. Harding’s SeaCure lifeboat release and retrieval systems (the new name for hooks) meet or exceed all IMO requirements and have an optional industry-recommended Secondary Safety System. The design is based on years of experience and feedback in service. It is safe to use and simple to operate and maintain. The SeaCure hook improves safety of crews and increases their confidence in their lifeboats. SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. SHACKLES Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D - Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles


133_304_CBS_2016.indd 206 07.08.2016 11:46:31

207

ACCOMMODATION EQUIPMENT TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. BLOCK POSITIONING UNITS (BPU`) The TTS Block Positioning Units provide a single low cost tool for increasing throughput capacity in drydocks or on slipways. The BPU is a tool for the complete micro positioning/holding task of the double bottom block. This task is normally performed by large shipyard cranes and by using BPUs, the cranes will be free to perform other tasks, increasing the shipyards throughput capacity significally. The BPU s can be operated under a block with a minimum of 3 units. 4 units is the most frequently used setup. But even more units can be added to position larger blocks or ring units.

CAPSTANS, BOLLARDS & HAWSE HOLESRelevant system groups:266, 274, 33, 381, 43, 432, 433, 435, 464, 481, 79 KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 CAPSTANS

MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 MOORING EQUIPMENT WINDLASSES RESTECH NORWAY A/S 8001 Bodø Telephone: +47-75 54 24 40 MOORING EQUIPMENT SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. MOORING EQUIPMENT Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet. WINCH BOLLARDS Winch Bollard: TTS Marine AS has developed a Winch Bollard mooring system, which makes mooring operations easier and safer than the more


133_304_CBS_2016.indd 207 07.08.2016 11:46:31


208

conventional systems currently available. The patended TTS Winch Bollard can replace mooring winches, capstans, warping drums and the bollards normally used for mooring. Basic features for Winch Bollard: .One man operated .Direct mooring without use of stoppers .Optimal and safe control during mooring .Control stand with a foot pedal .Integrated emergency stop and a flexible cable connection .Easy controllable fail safe brakes .Stepless speed control with high light line speed .Automatically reduction of line speed when the load is increased .Low noise during operation .Self lubricated bearings for low maintenance .Compact, clean and water resistant design

CHAINS, WIRES & ROPESRelevant system groups:274, 315, 327, 33, 4, 421, 43, 431, 432, 433, 434, 436, 437, 481, 63, 88 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. ROPES 12- STRAND Twelve strand braided rope, made from DYNEEMAT HMPE grade SK 75, with a braided jacket of polyester. This gives a compact, round

rope with a circular cross section and good spooling qualities. DynamaxT Plus with Polyester jacket is manufactured for applications where heavy abrasion is expected. Polyester has low friction against steel. For special applications our Dynamax Plus can be manu-factured with other type of jackets (dyneema, composite, etc.) KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 WIRE ROPE STOPPERS WIRE ROPES SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. ANCHOR CHAINS The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in


133_304_CBS_2016.indd 208 07.08.2016 11:46:31

209


permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations. CHAINS The largest stock of ship’s chains in The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations. Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D

- Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles LASHINGS Lashings

CRANES, CRANE EQUIPMENT, LIFTING DEVICES & BOOMSRelevant system groups:274, 3, 307, 32, 321, 327, 33, 346, 382, 4, 43, 434, 45, 463, 481, 503, 504, 563, 65 DALSEIDE SHIPPING SERVICES AS 5397 Bekkjarvik Telephone: +47-56 18 12 00 Telefax: +47-53 18 12 01 DECK MACHINERY KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 CRANES DECK CRANES NET HANDLING EQUIPMENT


133_304_CBS_2016.indd 209 07.08.2016 11:46:31


210

KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com DECK SYSTEMS Product groups - Streamer Handling System - Gun handling systems - Wide Tow Handling System - Back-deck control system - Additional seismic products - Bulk Hose Securing Unit - BHSU - eBird - Seismic cable control - Flush Manhole covers - RoJo Quick Hatch - Helideck Monitoring System - HMS 100 - Launch and Recovery System - LARS for AUV and ROV - Marine cranes - Movable Deck Extender MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 DECK MACHINERY PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Company brochures and datasheets are available on the Internet. CRANES Cranes by PALFINGER MARINE are designed to meet the safety standards and extreme environmental conditions of the marine and offshore industry. PALFINGER MARINE and PALFINGER DREGGEN offer a comprehensive product range of knuckle boom, stiff boom and

telescopic boom cranes as well as wire luffing and travelling cranes for various applications within the shipbuilding and the oil and gas industry worldwide. ENGINE ROOM CRANES Overhead travelling bridge design, capacity of up to SWL 40 t - Handling of provision and machinery parts below deck level - Two main designs: standard headroom mono-beam design and ultra-low headroom dual-beam design - Electric, pneumatic or hydraulic power supply KNUCKLE BOOM CRANES Foldable Knuckle Boom Crane Range from 2 mt to 330 mt - Sophisticated crane geometry for effortless work - Strenghts and flexibility for loading and unloading - Compact construction for numerious applications and use Knuckle Boom Crane range from 17 mt to 3000 mt Sophisticated crane geometry for effortless work Strength and flexibility for loading and unloading Compact construction PROVISION CRANES Monorail design with a capacity of up to SWL 20 t - Designed for the efficient handling of spares and provision in harbour - Two separate hooks supported by a trolley travelling on a monorail beam operating on both sides of the vessel - Available electric or hydraulic driven STIFF BOOM CRANES Stiff Boom Crane Range from 22 mt to 3000 mt Exceptional power-to-weight ratio and mainability Slender design and additional winches


133_304_CBS_2016.indd 210 07.08.2016 11:46:31

211


Demountable crane booms simplify transportation TELESCOPIC BOOM CRANES Telescopic Boom Crane range from 20 mt to 3000 m - Flexible for outreach and close range - Compact parking position and operator convenience - Shorter cable lenghts ensure safe load handling at close rang TRAVELLING CRANES Travelling cranes with a capacity from 50 t up to SWL - 600 For operations such as BOP/Christmas tree, pipe handling, or other specific tasks offshore - Available with special features like PLC programming, radio remote controls, design cabins, ATEX and IECEx approval WIRE LUFFING LATTICE BOOM CRANES Slewing pedestal design with a load moment of up to 3000 mt - Fully electric crane available according to EN13852-1/NORSOK R-002 - Supplied with built in electro-hydraulic or diese-built in power pack - Meeting latest offshore rules and regulations and can be supplied with a variety of features in accordance with specific customer requirements PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com DECK MACHINERY PGH 10T Tugger Winch PGH 10T Capstan PGH 10T PSV Cargo Handling hydraulically driven Capstan PGH Cargo Securing Winch

PGH Hydraulically driven PSV Cargo Securing Winch TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. BOOM CRANES Straight boom cranes Typical applications: .Hose Handling for tankers .Provision/stores cranes .Service cranes CARGO CRANES Cargo Cranes - Cylinder Luffing TTS Cargo Cranes are designed to handle a wide variety of lifting applications. The range comprises standard designs and tailor made solutions as required by the customer. The cranes are designed and built to meet all requirements from ILO as well as relevant authorities, and can be certified by any recognised Classification Society. KNUCKLE/TELESCOPIC CRANES Knuckle/telescopic cranes Type GPS (Straight), GPT (Telescopic) & GPK (Folding jib) Typical applications: .Supply vessels .Anchor handling/Tug .Research vessels .Cable and Pipe layers SIDELOADING SYSTEMS Side loading system - Conveyor system


133_304_CBS_2016.indd 211 07.08.2016 11:46:31


212

The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side loading conveyor system. SWLs range from 6-20 tonnes. The system offers the possibility of installing an outer platform which can be used for larger tidal variations, and is also ideal for reefer ships. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity Side loading system - Side Mover The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side mover system. SWLs for one lift range from 2-8 tonnes. The system is ideal for smaller dry cargo ships and offers the possibility of tandem operation of the lifts for handling long cargo. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity. Side loading system - Side Swinger The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side swinger system. SWLs for one lift range from 4-20 tonnes. Key benefits of a side loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity.

FENDERS & BUOYSRelevant system groups:436, 503

WINCHES, DRUMS & REELSRelevant system groups:274, 32, 327, 33, 34, 381, 4, 408, 43, 432, 433, 434, 437, 464, 481, 561, 79, 88 DALSEIDE SHIPPING SERVICES AS 5397 Bekkjarvik Telephone: +47-56 18 12 00 Telefax: +47-53 18 12 01 DECK MACHINERY EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. WINCH LINES 6-STRAND KARAT® WINCHline combines the unique characteristics of the high strength KARAT®-fibres with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT® WINCHline is designed to be used on self tensioning winches and is DNV Type Approved.


133_304_CBS_2016.indd 212 07.08.2016 11:46:31

213


6-STRAND BUOYANT WINCHlineT is a unique fibre rope with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHlineT is designed to be permanently floating and to be used on selftensioning winches. KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 WINCHES MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 DECK MACHINERY MOORING EQUIPMENT RESTECH NORWAY A/S 8001 Bodø Telephone: +47-75 54 24 40 MOORING EQUIPMENT SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. MOORING EQUIPMENT Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2.

In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. MOORINGS Moorings. - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. WINCHES Winches


133_304_CBS_2016.indd 213 07.08.2016 11:46:31


214


133_304_CBS_2016.indd 214 07.08.2016 11:46:31

215


ELECTRICALAccumulators, condensers, chargers & batteries 216Connectors, sockets, plugs & distribution boxes 216Converters (voltage, frequency), receivers, el. dampers and rectifiers 216Electrical heating 218Electrical motors & starters 218Lighting equipment & armatures 220Other electrical/electro equipment 221Power cables 221Switchboards & relays 222

ELECTRICAL

133_304_CBS_2016.indd 215 07.08.2016 11:46:31


216

ACCUMULATORS, CONDENSERS, CHARGERS & BATTERIESRelevant system groups:42, 81, 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71e-mail: [email protected] Internet: www.anda-olsen.no BATTERIES We supply a full range of batteries to all applications. BATTERY CHARGERS Wide range of battery chargers and rectifiers. We can also supply custom solutions to meet most demands. Our Anda Power Solution is a ground breaking system for DC backup power for vessels.

CONNECTORS, SOCKETS, PLUGS & DISTRIBUTION BOXESRelevant system groups:442, 447, 503, 541, 542, 7, 88, 89

CONVERTERS (VOLTAGE, FREQUENCY), RECEIVERS, EL. DAMPERS AND RECTIFIERSRelevant system groups:109, 12, 33, 34, 381, 40, 41, 42, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 74, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet.

ELECTRICAL

133_304_CBS_2016.indd 216 07.08.2016 11:46:32

217


DAMPERS We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies. ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no CONVERTERS Wide range of DC/AC and DC/DC converters to meet any demand. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 DAMPERS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ELECTRIC MOTORS www.siemens.no/marine AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional advantages include the reliable bearing design as well as rotors with aluminum die-cast cage

for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs. FREQUENCY CONVERTERS www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems. Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled. GEARS AND TRANSMISSIONS www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness.

ELECTRICAL

133_304_CBS_2016.indd 217 07.08.2016 11:46:32


218

Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications. TRANSFORMERS www.siemens.no/marine Wide range and type of transformers and reactors. THD - Filters Special applications.

ELECTRICAL HEATINGRelevant system groups:57, 88, 897 GLAMOX INTERNATIONAL ASA 6011 Ålesund Telephone: +47 70 14 30 16 HEATERS THERMAL TEC AS 2322 Ridabu Telephone: +47 62 58 59 30 ELECTRIC HEATED SYSTEMS TANK HEATING SYSTEMS

ELECTRICAL MOTORS & STARTERSRelevant system groups:109, 12, 381, 40, 564, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 665, 7, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no

ELECTRICAL

133_304_CBS_2016.indd 218 07.08.2016 11:46:32

219


MACHINERY DRIVES The machinery drives are designed to be the fastest drives to install, parameter-set and commission. They are highly compact and cost effective. Equipped with cuttingedge intellegence and safety capability the drives are designed specufically to meet the production and performancenneeds og system integrators, original equipment manufactures (OEMs) and panel builders, as well as the requirements of end users in a broad range of applications. Applications: The machinery drives are designed to meet the requirements of an extensive range og machinery applications. The drives are ideal for food and beverages, material handling, lifting, textile, printing, rubber and plastics, and woodworking applications. SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ELECTRIC MOTORS www.siemens.no/marine AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional advantages include the reliable bearing design as well as rotors with aluminum die-cast cage for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs.

FREQUENCY CONVERTERS www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems. Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled. GEARS AND TRANSMISSIONS www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine

ELECTRICAL

133_304_CBS_2016.indd 219 07.08.2016 11:46:32


220

With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications. STADT AS 6083 Gjerdsvika Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no Company brochures and datasheets are available on the Internet. AC DRIVES STADT STASCHO is a No Loss AC drive that supplies sinusoidal voltage and current to the electric motor and back to the main switchboard. This gives very low harmonic disturbances without using transformers or filters. STADT STASCHO is specially developed for marine propulsion systems, where it is used together with controllable pitch propellers.

LIGHTING EQUIPMENT & ARMATURESRelevant system groups:427, 442, 448, 503, 89, 891, 892, 893 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no LIGHT SOURCES Widest range of light sources available, and and unmatched knowledge of special bulbs and tubes. Large stock of lamps and fixtures for marine applications in stock. DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 ARMATURE GLAMOX INTERNATIONAL ASA 6011 Ålesund Telephone: +47 70 14 30 16 ARCHITECTURAL LIGHTS AREA LIGHTING DOWNLIGHTS EMERGENCY LIGHTS EXPLOSION PROOF LIGHTS FLOODLIGHTS HELIDECK-LIGHTING LIGHTING

ELECTRICAL

133_304_CBS_2016.indd 220 07.08.2016 11:46:32

221


NAVIGATION LIGHTS SEARCHLIGHTS TECHNICAL LIGHTS INDOOR TECHNICAL LIGHTS OUTDOOR TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. HELIDECK LIGHTING Helideck Lighting Our unique Helideck Control System includes: Circle&H-, Flood-, Perimeter-, Status-, Obstruction lights, illuminated Windsocks and other monitoring functions related to Helideck operation. LIGHTING SYSTEMS Marine Lighting Designed in close cooperation with leading ship-owners and Naval architects and designers. Navigation-, Search-, Floodlights and Deck lights for the most demanding requirements OBSTRUCTION LIGHTS Obstruction Lights High quality medium and low intensity LED obstruction lights in accordance with ICAO, FAA. Available for use in Zone 1, Zone 2 and Safe area.

OTHER ELECTRICAL/ELECTRO EQUIPMENTRelevant system groups:344, 41, 42, 436, 442, 79, 85, 86, 87, 871, 872, 88, 89

POWER CABLESRelevant system groups:17, 423, 85, 86, 87, 88 HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CABLES TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com CABLE GLANDS Cable glands Exe / Exd Tranberg’s Exe and Exdcable glands, stopping plugs, drain plugs, adaptors and reducers are provided with O-ring seal to secure ingress protection. Made ofbrass or Stainless Steel AISI 316 material. Fully compliant with the latest ATEX/IECEx standards.

ELECTRICAL

133_304_CBS_2016.indd 221 07.08.2016 11:46:32


222

SWITCHBOARDS & RELAYSRelevant system groups:109, 12, 381, 40, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 SWITCHBOARDS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide MAIN SWITCHBOARDS www.siemens.no/marine Low-Voltage Switchboard Medium-Voltage Switchboard

Cargo Pump Switchboard Starter Cabinets POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.

ELECTRICAL

133_304_CBS_2016.indd 222 07.08.2016 11:46:32

223


ENGINEERING/MANAGEMENT SERVICES & SOFTWARE

Administration, broking, finance & insurance services 224Basic design & project development services 224Certification, Qa and verification services 225Documentation & data management 225Engineering services 226Engineering software (CAD, analysis) 227Project management, construction management 227

ENGINEERING/MANAGEMENT SERVICES& SOFTWARE

133_304_CBS_2016.indd 223 07.08.2016 11:46:32


224

ADMINISTRATION, BROKING, FINANCE & INSURANCE SERVICESRelevant system groups:11, 112, 12, 121, 16, 542 BERGEN AGENT AS 5853 Bergen Telephone: +47-55 92 28 90 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.bergenagent.no SHIPAGENTS Shipagents 24 hour service GRIEG A/S, ALEX. BIRGER 5853 Bergen Telephone: +47-55 92 28 80 Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no BUNKER BROKERS Bunker brokers 24 hour service BUNKER TRADERS Bunker traders 24 hour service SHIPAGENTS Shipsagents 24 hour service SHIPBROKERS Shipbrokers 24 hour service

L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 SAFETY MANAGEMENT SYSTEMS METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 SENIOR MARINE ADVISERS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 GUARANTEE CLAIMS

BASIC DESIGN & PROJECT DEVELOPMENT SERVICESRelevant system groups:10, 108, 112, 14, 17, 20, 381, 41, 42, 79, 88 METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 SENIOR MARINE ADVISERS


133_304_CBS_2016.indd 224 07.08.2016 11:46:32

225


CERTIFICATION, QA AND VERIFICATION SERVICESRelevant system groups:10, 112, 12, 32, 33, 34, 45, 501, 502 METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 COMPLETION GREEN PASSPORTS IHM - INVENTORY OF HAZARDOUS MATERIALS MED - MARINE EQUIPMENT DIRECTIVE SENIOR MARINE ADVISERS

DOCUMENTATION & DATA MANAGEMENTRelevant system groups:109, 112, 417, 542 HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 SMART LINK IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 DATA LOGGERS

METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 COMPLETION GREEN PASSPORTS IHM - INVENTORY OF HAZARDOUS MATERIALS MED - MARINE EQUIPMENT DIRECTIVE SENIOR MARINE ADVISERS SEAGULL MARITIME AS 3194 Horten Telephone: +47 33 03 0910 Telefax: +47 33 04 62 79 MANAGEMENT SYSTEMS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 DOCUMENT CONTROL EDUCATIONAL MATERIAL SPARE PARTS SYSTEMS


133_304_CBS_2016.indd 225 07.08.2016 11:46:32


226

ENGINEERING SERVICESRelevant system groups:10, 108, 109, 112, 12, 14, 17, 20, 381, 40, 41, 42, 52, 54, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 88, 89, 898 MAS FLUID CONTROL AS 1301 Sandvika Telephone: +47 67 80 71 20 Telefax: +47 67 80 71 21 ENGINEERING MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MACHINING SERVICE MATRE Machining Services Through 60 years of delivering custom-made solutions for offshore and maritime applications, Matre has gained superior experience with machining special steel - resulting in a high number of commissions as subcontractor for machined components. At Matre’s production plant our experts are equipped with modern and advanced CNC machine tools, ensuring effective production and accuracy in every minute detail. As an integral part of our quality process, we also have well-equipped premises for assembly,

control, testing and storage of machined components. METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 SENIOR MARINE ADVISERS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide


133_304_CBS_2016.indd 226 07.08.2016 11:46:32

227


ENGINEERING SOFTWARE (CAD, ANALYSIS)Relevant system groups:10, 101, 11, 12, 121, 381, 542, 792 STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 DOCUMENT CONTROL E-COMMERCE INSURANCE SYSTEMS

PROJECT MANAGEMENT, CONSTRUCTION MANAGEMENTRelevant system groups:1, 10, 109, 112, 12, 121, 14, 17, 192, 20, 381, 40, 41, 42, 542, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 88, 89, 898 BAZE TECHNOLOGY AS NO-3905 Porsgrunn Telephone: +47 94 80 06 00 Telefax: +47 35 10 54 99 INTERGRATED OPERATION EQUIPMENT METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 SENIOR MARINE ADVISERS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet.


133_304_CBS_2016.indd 227 07.08.2016 11:46:32


228

LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 SHIPPING MANAGEMENT


133_304_CBS_2016.indd 228 07.08.2016 11:46:32

229


HYDRAULICS EQUIPMENT, FLUID TRANSFER AND TREATMENT

Ejectors 230Fluid filters 230Fluid nozzles & mixing batteries 232Fluid valves & other armatures 233Freshwater generation 234Hydraulic motors & actuators 235Hydraulic plants & equipment 236Other fluid transfer/treatment equipment 236Pipes & pipe units 236Pumps & pump units 237Purification plants & fluid treatment 239Separators & traps 242

HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT

133_304_CBS_2016.indd 229 07.08.2016 11:46:32


230

EJECTORSRelevant system groups:356 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Company brochures and datasheets are available on the Internet. EJECTORS Ejectors E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Stripping Ejectors - reliable and indispensable jet pumps. TeamTec has more than 50 years experience with production of stripping ejectors, and has supplied over 75 000 units worldwide. The stripping ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. TeamTec Stripping Ejectors are superior for all-purpose stripping and have become an important part of the standard equipment on modern new buildings. The main areas of application for the TeamTec Stripping Ejectors are stripping of cargo tanks, ballast water tanks, cargo holds, engine rooms and bilge, vacuum cleaning engine rooms, as well as emergency stripping. With a combination of high quality material and skillful construction TeamTec supplies effective solutions to meet onboard requirements. Other TeamTec ejector types and products related to specific purposes: i.e. mud mixing, degassing, vacuuming and evacuation of air, gas.

TeamTec’s design and production of ejector types is flexible in accordance with the customer’s requests. The TeamTec Stripping Ejectors are produced in Ni-Al-Bz, stainless steel and super duplex.

FLUID FILTERSRelevant system groups:309, 404, 43, 438, 442, 444, 57, 584, 6, 601, 646, 651, 7, 70, 71, 712, 73, 743, 744, 745, 761, 803 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. DRINKING WATER FILTERS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.


133_304_CBS_2016.indd 230 07.08.2016 11:46:32

231


FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com OIL FILTERS Oil filters GJERDE AS, JOHN 6083 Gjerdsvika Telephone: +47 70 02 65 00 Telefax: +47 70 02 65 01 FUEL FILTER MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. STRAINERS Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve

- Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com FILTERS Optimarin offers three different 40 micron filters: FilterSafe basket type, B&K candle type, and Filtrex basket type filter. All three filter types have automatic back flushing and are self-cleaning. Removes large particles and organisms. Low pressure loss of only 0.1 - 0.5 BAR. Horizontal or vertical installation. Bypassed during de-ballasting.


133_304_CBS_2016.indd 231 07.08.2016 11:46:32


232

FLUID NOZZLES & MIXING BATTERIESRelevant system groups:401, 404, 62, 721 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com NOZZLES Nozzles for oil burners MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no NOZZLES MATRE Nozzles Matre has developed different types of nozzles for firefighting. These are permanent installed high capacity deluge nozzles and pop-up nozzles for helideck or larger areas such as hangars or similar. Pop-up nozzle: The deck integrated pop-up nozzle can be delivered in two versions: offshore-/ ship version and yacht version. Standard material is SS316 for both nozzles and main parts in foam skid. Optional materials for nozzles are seawater resistant bronze and even titanium. The nozzles are installed flush with the deck top surface.When the system is released the nozzles will be lifted up by the water pressure

and make an effective spray distribution of water/foam mixture to the entire landing area. According to the latest requirements given in CAP-437 these nozzles are further developed. The flow from a blocked nozzle will now remain the same as a fully popped-up nozzle. In this way the system still deliver full water capacity on deck if any nozzle are blocked. Flexi nozzles: MATRE Flexi Nozzle is a high capasity deluge nozzle. Both water capacity, spread angle and jet direction can be adjusted. MATRE Flexi Nozzles are in size 1” to 4” with flow range from approx. 200 l/min. to 4000 l/min. These nozzles have adjustable direction, spread angle and capacity. The large models of the nozzle operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution. Matre Flexi Nozzle can be used when a specific area has to be covered like: - Car deck on a ferry - Tank top - Well head area The larger models of the nozzles operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution.


133_304_CBS_2016.indd 232 07.08.2016 11:46:32

233


FLUID VALVES & OTHER ARMATURESRelevant system groups:3, 309, 35, 354, 37, 375, 442, 513, 57, 58, 6, 601, 651, 7, 70, 71, 72, 73, 75, 79, 804, 84, 89 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 BALL VALVES BUTTERFLY VALVES CHECK VALVES GATE VALVES REDUCTION VALVES STOP VALVES GJERDE AS, JOHN 6083 Gjerdsvika Telephone: +47 70 02 65 00 Telefax: +47 70 02 65 01 CHECK VALVES VALVES IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 SOLENOID VALVES

MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. ANSI VALVES BALL VALVES BUTTERFLY VALVES CHECK VALVES CONTROL VALVES DIAPHRAGM VALVES GATE VALVES JIS VALVES KNIFE GATE VALVES NEEDLE VALVES SAFETY VALVES SELFCLOSING VALVES STOP VALVES VALVES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer


133_304_CBS_2016.indd 233 07.08.2016 11:46:32


234

- Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 VALVE EQUIPMENT WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Company brochures and datasheets are available on the Internet. BUTTERFLY VALVES Spjeldventiler for skip, offshore og petrokjemisk industri. VALVES Spjeldventiler og kuleventiler for sjøvann, oljeprodukter, kjemikalier med LPG og LNG.

FRESHWATER GENERATIONRelevant system groups:582, 584, 761, 794 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. MEMBRANE SYSTEMS Air Products membrane systems meets your requirements for . Field-proven, robust membranes, which can withstand oil vapor as well as liquid water. . Exceptional total lifetime. . Guaranteed After Sales Services throughout lifetime. ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. DRINKING WATER TREATMENT AG possesses all technologies for treatment of drinking water and process fluids. That includes UV-sterilizers, simplex- and duplex basket filters, automatic backwash filters and mediafilters with fine ceramic media or activated carbon.


133_304_CBS_2016.indd 234 07.08.2016 11:46:32

235


ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. DRINKING WATER FILTERS DRINKING WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com FRESH WATER GENERATORS Fresh water generators.

HYDRAULIC MOTORS & ACTUATORSRelevant system groups:309, 381, 43, 438, 439, 601, 651, 66, 79, 898 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Company brochures and datasheets are available on the Internet. ACTUATORS Representing: Danaher Motion, Stockholm, Sweden: Linear actuation systems. ELTORQUE AS 7125 VanvikanTelephone: +47-74 85 55 20 Telefax: +47-74 85 55 12 QUARTER-TURN ACTUATORS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com ACTUATORS Totally electric Actuator Ultra compact, high torque, easy control electric actuator for remote valve control.


133_304_CBS_2016.indd 235 07.08.2016 11:46:32


236

Based on permanent magnet motor technology from the PG-MAPS pumping concept. Wide range of scalable sizes, and ATEX 100 ex-proof available SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 ACTUATORS

HYDRAULIC PLANTS & EQUIPMENTRelevant system groups:3, 30, 309, 438, 439, 601, 651, 83 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com HYDRAULIC POWER PACKS Hydraulic Power Packs HPU\’s in all executions, and variations for onshore-, offshore applications SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 HYDRAULIC SYSTEMS

OTHER FLUID TRANSFER/TREATMENT EQUIPMENTRelevant system groups:442, 444, 481, 582, 867

PIPES & PIPE UNITSRelevant system groups:121, 196, 3, 40, 51, 6, 64, 72, 721, 722, 75, 80, 802, 804, 81, 821, 831, 928 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. SPIRO PIPES Our AERON® spiro pipe systems comes in uninsulated and preinsulated types, that complies with EUROVENT 2.2 Class C specifications for tightness and withstands negative and positive pressure up to 3000 Pa. The preinsulated spiro pipes is made of galvanized steel sheet and insulated with 16mm mineral wool that provides an excellent guarantee against heat loss during the winter, and against condensation in the period of cooling all through the summer. The fittings and pipes are ready for easy assembling as the


133_304_CBS_2016.indd 236 07.08.2016 11:46:33

237


fittings are supplied with a sealed rubber-ring to ensure tightness. The uninsulated and preinsulated spiropipes can also be delivered in stainless steel, suitable for outdoor installation in offshore environments. DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 ACID PROOF PIPES PIPES STAINLESS STEEL PIPES

PUMPS & PUMP UNITSRelevant system groups:3, 309, 353, 354, 356, 36, 438, 439, 465, 481, 513, 57, 581, 582, 583, 6, 64, 7, 721, 75, 76, 761, 801, 803, 813, 814, 819, 83 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. PUMPS *Centrifugal pumps - Dickow Pumpen KG *Eccentric pumps -ASV Stuebbe GmbH & Co KG *Centrifugal pump of plastic materials - ASV Stuebbe GmbH & Co. KG

*Booster pumps, water supply, industrial pumps Aturia Pumps, Italy *Air operated diaphragm pumps, air powered doble diaphragm pumps - Yamada Europe, Netherlands horizontal pumps - APEX pumps *Centrifugal magnetic coupled side channel pumps - Dickow pumpen KG, Germany *Screw pumps, eccentric screw pumps, mono pumps - Armatech FTS GmbH, Germany *Peristaltic pumps, hose pumps - Ragazzini, Italy *Centrifugal pumps bombas ercole marelli - Sundyne Marelli, Spain *Boiler feed pumps, cooling systems, booster pumps - Edur Pumpenfabrik GmbH, Germany *Diaphragm dosing pumps, piston pumps, plungerpumps, solenoid metering pumps, dosing plants - Seybert & Rahiner, Germany *OBL dosing pumps (API 675), Milan, Italy Alfsen og Gunderson AS is a leading supplier of fluid handling equipment for offshore use. We deliver centrifugal pumps and pumps systems, metering, dosing and injection pumps for chemicales. AG also designs and builds complete skid mounted units, consisting of pumps, regulation and monitoring systems acc. to API/NORSOK standards and regulations. We have inhouse engineering capacity, and can do all kind of engineering, incl. drawing and detailed design, production, automation and commissioning works. FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. PUMP UNITS Transport pump units Pumps and equipment


133_304_CBS_2016.indd 237 07.08.2016 11:46:33


238

PUMPS SCREW PUMPS Screw pumps JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 PUMPS TRANSMISSIONS JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com VACUUM PUMPS VacuumaratorT pumps In-line installation of the VacuumaratorT pump combined with a small footprint and low weight allows for unique installation flexibility and considerable weight savings. These advantages, along with low energy consumption, make JetsT the preferred choice for designers, yards and owners. KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 FISH PUMPS MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no

PUMPS MATRE Pumps Matre Pumps comprise a wide range of specially designed, effective and reliable liquid ring pumps and centrifugal pumps. Our pumps represent state of the art pumping technology, and are results from many years of research and development - often in close cooperation with our customers. Matre Pumps are utilized by some of the worlds most recognized manufacturers of diesel engines and lifeboats, e.g Rolls Royce Marine, Wärtsilä, Hedemora Diesel, CAT Diesel, Cummins Diesel and Schat-Harding. Our pumps are delivered in salt-water resistant bronze, with shafts of stainless steel. Matre Pumps feature a robust design and withstand polluted water containing particles such as sand and shell. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Company brochures and datasheets are available on the Internet. AGITATORS PG-Submix 60 / 80 (Hydraulic driven) Market leading product for OSV’s world wide for high yield liquid mud handling Flygt Mixers (electrically driven) World leading products for electric mudmixers DEEPWELL PUMPS PG-SLB 125 Low Share


133_304_CBS_2016.indd 238 07.08.2016 11:46:33

239


Twin-screw Deepwell Pumps All stainless steel / duplex steel chemical cargo-handling pumps, based on twin-screw pump technology. Positive displacement, low share, and vertially pulsation free performance with capacities up to 100m3/h and 9.0 BarG NOFO 2005-conform, hydraulically driven, ex-proof execution ENGINE ROOM PUMPS Engine Room Pumps GAS CARGO PUMPS SMB Liquid Gas, submerged, in-tank Cargo Discharge Pum Shinko - Nishishiba SMB type submerged motor pumps have been developed as the send-out pumps in LNG, LPG & DME storage stations, and pressurizing and circulating pumps in LNG cryogenic power generation plants. The pump is used in submerged condition in the cryogenic liquefied gas in the barrel installed outside of the storage tank. It can be taken out of the barrel easily by closing the valve provided between the barrel and tank, if the necessity occurs to check the pump for maintenance and inspection. MUD PUMPS Liquid oil mud pumps. PUMPS

PURIFICATION PLANTS & FLUID TREATMENTRelevant system groups:355, 382, 408, 444, 445, 501, 57, 58, 581, 582, 584, 64, 70, 722, 761, 801, 803, 867 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. PURIFICATION SYSTEMS Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors. ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. WATER TREATMENT Leading supplier of technology for all kinds of water treatment - with special expertise in straining, filtration, disinfection and pumping techniques. Also including agitators and static mixers.


133_304_CBS_2016.indd 239 07.08.2016 11:46:33


240

ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. COOLING WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide. REVERSE OSMOSIS PLANTS Produksjon, salg og vedlikehold av avsaltningsanlegg ved hjelp av omvendt osmoseanlegg/RO membrananlegg. Verksteder og service world wide. WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.

JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com SEAWAGE TREATMENT PLANTS EcomotiveTSewage Treatment Plant by JetsT A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience. KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 FUEL ECONOMIZING SYSTEMS OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com Company brochures and datasheets are available on the Internet. BALLAST SYSTEMS The type approved Optimarin Ballast System is based on filtration as pre-treatment and high doses of UV irradiation for inactivation of marine organisms, viruses and bacteria, without affecting the normal operation of the ship. Ballast water is UV treated both during ballasting and de-ballasting to ensure the dual UV effect. Ballast water is only filtered during ballasting. The OBS is one of very few treatment options that does not use or generate chemicals or


133_304_CBS_2016.indd 240 07.08.2016 11:46:33

241


biocides in its treatment or cleaning processes. It is based on the idea that such systems should be environmentally sound, simple, flexible and easy to install, and capable of operating on both newbuilds and existing vessels. The Optimarin Ballast System is easy to install on board existing ships (retrofit) as well as on newbuilds. The modulized system is very flexible, with a relatively small footprint and weight, and will fit vessels of all kinds and sizes. The OBS can be delivered as a complete skid or as a customized solution. It accommodates a wide range of ballast water capacities and can handle flows up to 3000 m3/h (or higher upon request). The Optimarin Ballast System is normally installed in the pump or engine room and in close proximity to the ballast pumps. The OBS can be delivered in a container, on a skid or in separate pieces to allow for easy installation in most any available space. The equipment can be installed horizontally, vertically, on or suspended below deck, along the ship’s side or in several separate locations. It is relatively low weight and adds no extra noise. The OBS utilizes every square meter and does not require much space, this makes it a cost-efficient solution. UV SYSTEM The UV System was developed based on 20 years of experience in water injection on offshore platforms, water treatment for fish farming and drinking water plants in Norway.High power UV for the efficient killing or inactivation of organisms, bacteria and pathogens in ballast water. One UV lamp per chamber (167 m3/h flow rate per chamber). Standardized UV chamber, installed in parallel on a single manifold for higher flows. Developed and manufactured for installation aboard ships. Optimized for minimum maintenance and ease of operation. It is self-cleaning, with no moving

parts or need for chemical cleaning. UV and temperature sensor in each chamber. TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no BALLAST WATER TREATMENT SYSTEM TeamTec and Evonik Resource Efficiency GMBH have signed a cooperation agreement. Since February, 2016 TeamTec has taken over the manufacture, sales and service of the AVITALIS T BWTS. A filter and chemical injection system that ensures complete and environmentally benign BW cleaning in any temperature, salinity and turbidity. YARA MARINE AS 0277 Oslo Telephone: +47 47 88 85 44 e-mail: [email protected] Internet: www.greentechmarine.com Company brochures and datasheets are available on the Internet. SCRUBBERS Green Tech Marine® scrubber R15 By using Green Tech Marine® scrubbers, shipowners can continue to operate on heavy fuel oil instead of more costly marine gas oil while staying below the strict IMO requirements regarding sulphur emissions. Fuel prices of marine gas oil are expected to rise even higher in 2015 when the 0,1% sulphur limit enters into force. The Green Tech Marine® scrubbers make it simple to meet new environmental regulations by replacing your ship’s exhaust silencer - no structural modifications required. You also benefit from: .Proven reduction of SOx and PM, compliant with MARPOL Annex VI -MEPC 58 and 59


133_304_CBS_2016.indd 241 07.08.2016 11:46:33


242

.Hybrid scrubber - both open and closed loop operation .An extremely small footprint .Low weight resulting in minimal change to stability conditions .Energy-efficient To see some of the innovative features of the Green Tech Marine® Scrubber, point at the appropriate hot-spot with your mouse The scrubber is a hybrid scrubber and can both operate in open and closed loop. Closed loop to be used while in port and during maneuvering re-circulating the water already within the scrubber. When at sea switching to open loop again. There is no need for water treatment in open loop since the natural alkalinity of seawater neutralizes the acid. Wash water is continuously monitored at the inlet and the outlet to make sure it is in line with the criteria of MEPC 184 before it is discharged into the sea with no harm to the environment.

SEPARATORS & TRAPSRelevant system groups:382, 702, 712, 73, 803 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. SEPARATORS & COWLS AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that

yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks.


133_304_CBS_2016.indd 242 07.08.2016 11:46:33

243


MATERIALS, PROTECTION & INSULATION

Additives & agents 244Aluminium 244Anti-corrosion 244Chemicals 245Coatings & paint 245GRP/FRP 246Insulation 246Lubricants 247Other materials 247Plastic 247Stainless steel 247Steel 248


133_304_CBS_2016.indd 243 07.08.2016 11:46:33


244

ADDITIVES & AGENTSRelevant system groups:192, 196, 27, 276, 28, 288, 3, 40, 443, 444, 5, 52, 53, 582, 584, 6, 63, 702, 80, 802, 804, 81, 821, 831 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no COMPOSITE PRODUCTS These are custom-designed products for commercial and defence applications. Structural composites can be divided into the following product categories: JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com RUST PREVENTION AGENTS Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.

ALUMINIUMRelevant system groups:102, 196, 201, 25, 505, 52, 53, 533 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no DROPPED OBJECT PROTECTION On the topsides, the Dropped Object Protections are used for protecting decks or equipment. The Protections can be made in small panels or large protective decks and are used where swinging objects may be lifted above critical equipment. The panels can be designed to withstand the load from falling objects like drill collars, containers etc.

ANTI-CORROSIONRelevant system groups:27, 276, 278, 28, 288, 443, 52, 53, 63 DALSEIDE SHIPPING SERVICES AS 5397 Bekkjarvik Telephone: +47-56 18 12 00 Telefax: +47-53 18 12 01 ANTI-CORROSION EQUIPMENT CORROSION PROTECTION


133_304_CBS_2016.indd 244 07.08.2016 11:46:33

245


ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. ANTI-CORROSION AGENTS ANTI-CORROSION EQUIPMENT ANTI-CORROSION SYSTEMS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide. HELSETH A/S 6450 Hjelset Telephone: +47-71 20 29 00 Telefax: +47-71 20 29 02 HOT DIP GALVANIZING JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com ANTI-CORROSIVE AGENTS RUST PREVENTION AGENTS Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry. ANTIFOULING Seaquantum Ultra S - hydrolytic Seaquantum Classic S - hydrollytic

Seaquantum Plus S - hydrolytic Seaquantum Static - hydrolytic Seaquantum Pro U Seamate MSeamate NB Seaforce 30 Seaforce 60 Seaforce 90 Seaconomy 700 - hydrolytic Seaconomy 900 - hydrolytic

CHEMICALSRelevant system groups:123, 196, 444

COATINGS & PAINTRelevant system groups:192, 27, 276, 28, 288, 403, 406, 432, 442, 443, 52, 522, 53, 63 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com COATINGS PAINTS Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry. PRIMERS Jotamastic 80 - Epoxy mastic primer Jotamastic 87 - Epoxy mastic primer Jotamastic 90 - Epoxy mastic primer Jotamastic Smart Pack - Primer for maintenance Jotacote Universal - hard-wearing epoxy primer Jotacote Universal N10 - hard-wearing epoxy primer


133_304_CBS_2016.indd 245 07.08.2016 11:46:33


246

TANKCOATING Tankguard zink Tankguard dw Tankguard special ultra TOPCOATS Hardtop AS - Shiny polyuret Paint with good color Hardtop AX Hardtop XP - Topcoat, shiny polyuretan with good color Hardtop Flexi - Topcoat, semi-gloss Hardtop Optima - Two-component polysiloxsan Topcoat Hardtop CA - two-component Hardtop Smart Pack - Topcoat for maintenance Pilot II - 1-component alkyd-based topcoat Pilot ACR - 1-component, quick-drying akryl-based Marathon - epoxy primer Marathon IQ - epoxy primer

GRP/FRPRelevant system groups:196, 3, 382, 40, 52, 53, 6, 72, 80, 802, 804, 81, 821, 831

INSULATIONRelevant system groups:196, 361, 51, 511, 52, 555, 64, 75, 928 GLAVA AS 1801 Askim Telephone: +47 69 81 84 00 Telefax: +47 69 81 84 78 COMFORT ISOLATION

SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com INSULATION Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound


133_304_CBS_2016.indd 246 07.08.2016 11:46:33

247


LUBRICANTSRelevant system groups:192, 27, 276, 28, 288, 3, 4, 43, 443, 52, 53, 63, 71 MASTO WIRE SERVICE A/S 4688 Kristiansand S Telephone: +47 38 09 70 50 Telefax: +47 38 09 70 53 e-mail: [email protected] Internet: www.masto.no Company brochures and datasheets are available on the Internet. WIRE ROPE LUBRICATORS, HIGH PRESSURE Distribution for the world-wide shipping marked: Wilhelmsen Ships Service (Unitor) together with Masto Wire Service A.S. WIRE ROPE LUBRICATORS (high-pressure). For the shipping, offshore and industrial market. Produced in Norway. World-wide export

OTHER MATERIALSRelevant system groups:194, 196, 27, 276, 28, 288, 443, 505, 52, 53, 63, 797, 801, 89 BERGEN PLASTICS RUBBER SOLUTIONS AS 5852 Bergen Telephone: +47 55 92 57 20 Telefax: +47 55 92 57 49 TECHNICAL RUBBER APPLICATIONS

OPTIMERA AS - MARINE DIV. 6155 Ørsta Telephone: +47 47 64 80 00 CHIPBOARD GYPSUM BOARD PLYWOOD SPERRE INDUSTRI AS 6057 Ellingsøy Telephone: +47 70 16 11 00 CASTINGS

PLASTICRelevant system groups:196, 505, 52, 53, 721, 722, 80, 804 BERGEN PLASTICS RUBBER SOLUTIONS AS 5852 Bergen Telephone: +47 55 92 57 20 Telefax: +47 55 92 57 49 TECNICAL PLASTIC COMPONENTS

STAINLESS STEELRelevant system groups:196, 505, 52, 53, 556 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 STAINLES STEEL FURNISHMENTS STAINLESS STEEL PIPES


133_304_CBS_2016.indd 247 07.08.2016 11:46:33


248

STEELRelevant system groups:196, 2, 505, 52, 53, 801, 804


133_304_CBS_2016.indd 248 07.08.2016 11:46:33

249


NAVIGATION & COMMUNICATIONAntennas & transmitters 250Detection & identification equipment 251Other communication equipment 252Other nautical equipment 253Positioning & navigation equipment 253Radio & telephone communication 255Satellite communication 255

NAVIGATION & COMMUNICATION

133_304_CBS_2016.indd 249 07.08.2016 11:46:33


250

ANTENNAS & TRANSMITTERSRelevant system groups:411, 412, 421, 422, 423, 424, 546, 70 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. ANTENNA COOLING UNITS AERON® Antenna unit type AM is a lightweight, compact cooling unit designed for cooling of antenna systems. The AM unit is equipped with compressor, evaporator and air-cooled condenser all fitted together in a “ready to use” unit. The AM can operate at surrounding temperatures up to 65?C. The units will be delivered with thermostat and complete control panel for easy operation. The AM Unit is a compact, flexible and quiet running air-condition unit. The unit is designed to operate inside or below radar domes in a non EX zone. The unit normally has a cooling capacity of 2,5 - 3.5 kW. The unit is built in stainless steel chassis AISI 316 quality for long lasting lifetime. The construction is strong due to the harsh environment often found in demanding marine and offshore installations.

COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Company brochures and datasheets are available on the Internet. ANTENNAS VHF Comrod is a world leader in the design and manufacture of commercial marine antennas. All products are designed and manufactured to maintain exceptional performance while withstanding the rigours of the marine environment. Antennas are available covering the HF, maritime VHF, Cellular & Wireless LAN frequency bands. Multiband antennas are also available covering combinations of frequency bands. ANTENNAS, DEFENCE Forces worldwide choose Comrod products for their superior design and combat proven performance. Comrod has collaborated extensively with end users around the globe in the development of HF, VHF, UHF & SHF antennas for military applications. The result is a product line of sturdy broadband military antennas for tactical applications, consisting of handheld, manpack, vehicle, base station and shipboard antennas. The line includes combined antennas for VHF/GPS, VHF/UHF/L-Band, VHF/DECT, VHF/W-LAN, UHF/GPS, UHF/DECT and UHF/W-LAN. All antennas have been through full military testing for different programmes around the globe. Comrod sectional and telescopic support masts are used worldwide in heights from 5 metres up to heavy duty 34 metres. The sectional masts


133_304_CBS_2016.indd 250 07.08.2016 11:46:33

251


can elevate headloads up to 100kg and are available with electric winch and rotator tilter units as optional extras. The telescopic mast range is available in either push up, pneumatic, winch driven or electro-mechanical models up to 24 metres with headloads up to 100kg depending on the model selected. Comrod also manufactures passive and active military antenna combining systems for both vehicle and shipboard installations. The systems are primarily designed to reduce the number of antennas on a single installation. This allows the simultaneous use of several radios to one transmit antenna, or to individual directional antennas. A receiver distribution amplifier is included to allow simultaneous reception on all receivers. ANTENNAS, MARINE & CIVIL Comrod manufactures a range of masts for civil and commercial applications. Mast configurations are available in composite sectional, composite telescopic and aluminium telescopic. Masts and accessories are in service worldwide with civil and commercial organisations for applications such as temporary mobile phone base stations, temporary lighting, elevation of optronic equipment, elevation of sensors etc. JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 ANTENNAS RADAR TRANSPONDERS ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 TV ANTENNA SYSTEMS

DETECTION & IDENTIFICATION EQUIPMENTRelevant system groups:196, 382, 408, 411, 412, 414, 417, 419, 42, 421, 425, 426, 427, 461, 483 IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 AIS (AUTOMATIC IDENTIFICATION SYSTEMS) GMDSS LRIT - LONG RANGE IDENTIFICATION AND TRACKING SYSTEM RADARS JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 AIS (AUTOMATIC IDENTIFICATION SYSTEMS) SEARCH AND RESCUE RADAR TRANSPONDERS KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex AIS (AUTOMATIC IDENTIFICATION SYSTEMS)


133_304_CBS_2016.indd 251 07.08.2016 11:46:33


252

- AIS Onboard In accordance with IMO requirements all SOLAS ships in international traffic above 300 gross tons must have Automatic Identification Systems (AIS) installed onboard. We offer a wide range of different AIS for use onboard ships (AIS mobile stations) tailored to different requirements. All mobile stations are in accordance with the IMO regulations. AIS Infrastructure We provide a full range of AIS infrastructure used for shore-side and platform based AIS infrastructure. Our long record of supplying AIS infrastructure, GPS reference networks and EGNOS monitoring systems has provided us with the competence needed to undertake AIS projects of all types. We are an active member of IEC, ITU and IALA. MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 OIL SPILL DETECTIONS SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 ECHO SOUNDER TRANSDUCERS ECHO SOUNDERS SONAR ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 SOUND SIGNAL RECEPTION SYSTEMS

OTHER COMMUNICATION EQUIPMENTRelevant system groups:381, 416, 42, 423, 425, 43, 444, 53, 79, 792, 811, 85 HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CCTV IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 COMMUNICATION SYSTEMS THERMO CAMERAS JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 COMMUNICATION INTEGRATED COMMUNICATION SYSTEMS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 COMMUNICATION


133_304_CBS_2016.indd 252 07.08.2016 11:46:33

253


ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 INTEGRATED COMMUNICATION SYSTEMS PUBLIC ADDRESS SYSTEMS TALK-BACK SYSTEMS

OTHER NAUTICAL EQUIPMENTRelevant system groups:4, 417, 427, 7, 8, 893 GLAMOX INTERNATIONAL ASA 6011 Ålesund Telephone: +47 70 14 30 16 FLOODLIGHTS NAVTOR AS 4370 Egersund Telephone: +47 51 49 22 00 Telefax: +47 51 49 22 01 WEATHER PREDITION EQUIPMENT TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. SHIP HORNS FROM CLASSIC “HONKS” TO COMPLETE ACOUSTIC SYSTEMS A Kockum Sonics whistle is not only high-quality design, it also contains the experience of more than 1 million TYFON® installations!

Audibility is determed not simply by the strength of sound emenating from the whistle - much more is entailed to overcome absorption, distortion and local noise. This quality is the result of more than 80 years of development. The TYFON® fulfi ls all current IMO and national authority regulations. ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 CENTRAL CLOCK SYSTEMS

POSITIONING & NAVIGATION EQUIPMENTRelevant system groups:14, 17, 20, 381, 40, 408, 41, 411, 412, 413, 417, 42, 43, 542, 79, 88 IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 ECDIS GPS GYRO COMPASSES NAVIGATION EQUIPMENT JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 EMERGENCY POSITION INDICATING RADIO BEACON- EPIRB/S-VDR


133_304_CBS_2016.indd 253 07.08.2016 11:46:33


254

KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex GPS / GLONASS - DARPS - Differential Absolute and Relative Positioning Sensor The DARPS product line combines high- performance sensors for reliable and accurate absolute and relative positioning of two vessels such as a shuttle tanker and a FPSO/FSU. The DARPS has proven itself over and over in harsh environments worldwide. - DPS - Differential Positioning Sensor Our Differential Position Sensors - DPS product line is developed for applications demanding reliable, accurate and quality-controlled position and velocity. The system has been well-proven and adapted by professional marine and offshore users worldwide. Typical applications include dynamic positioing systems, docking control and high-speed vessels. NAVIGATION / POSITIONING SYSTEMS Seapath Our Seapath systems are designed to meet the position, attitude and heading requirements ofhydro acoustic positioning and seabed mapping systems. The Seapath integrates GPS and inertial navigation technology to optimize accuracy in bathymetric surveys, seismic surveys and ADCP (Acoustic Doppler Current Profiler) systems. RADius RADius is a relative positioning system developed for operation in harsh and demanding environment utilising radar technology. As a stand-alone system, or interfaced with dynamic positioning or integrated bridge systems, RADius provides an extremely accurate and responsive ald to loading and

unloading procedures for operations in all weather conditions. Docking and all loading procedures are also applications that can take advantage of the RADius system. REFERENCE SYSTEMS SpotTrack laser-based reference system SpotTrack is primarily used as a reference system for relative positioning in DP operations. The SpotTrack sensor is a robust motion stabilised rotating laser sensor which measures range and bearing to one or several retro-reflective targets installed on the target platform or vessel. Automatic wave motion stabilisation provides optimum target lock. The onboard HMI unit allows for easy configuration and monitoring of the SpotTrack system. L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 NAVIGATION SYSTEMS NAVTOR AS 4370 Egersund Telephone: +47 51 49 22 00 Telefax: +47 51 49 22 01 ELECTRONIC CHARTS TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com NAVIGATION Aids to Navigation ( Aton ) NAVAIDS We specifically design to meet or exceed all known operational and safety requirements for aids to navigation on offshore installations. Tranberghas for 30 years been the exclusive distributor for Tideland products in Norway.


133_304_CBS_2016.indd 254 07.08.2016 11:46:33

255


RADIO & TELEPHONE COMMUNICATIONRelevant system groups:41, 412, 42, 421, 422, 423, 424, 425 IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 TELEPHONE SYSTEMS VHF RADIO JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 TELEPHONE SYSTEMS - BATTERYLESS UHF RADIO VHF RADIO KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex COMMUNICATION The Maritime Broadband Radio (MBR) is developed for use in maritime applications where digital high-speed reliable communication and data transfer are crucial for efficient and safe operations. MBR operates in the 5 GHz frequency band and has proven high capacity communication over distances in excess of 50 kilometres. Operating as a maritime “information highway”, the MBR connects crews and their vessels with a high-speed and high capacity

digital communication channel with “fast track” priority options. The system can securely carry a diverse array of op¬erational information, from real-time video to system data, and remotely situated teams can work together seamlessly, co-or¬dinating systems and activities for optimal performance, safety and operational success. ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 BATTERYLESS TELEPHONE SYSTEMS TELEPHONE SYSTEMS

SATELLITE COMMUNICATIONRelevant system groups:42, 421, 422, 423, 424, 425, 503, 546 IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 CCTV - CLOSED CIRCUIT TELEVISION SATELLITE COMMUNICATIONS


133_304_CBS_2016.indd 255 07.08.2016 11:46:34


256


133_304_CBS_2016.indd 256 07.08.2016 11:46:34

257


POWER GENERATION, PROPULSION & MANOUVERING

Aggregates 258Bearings 258Brakes, couplings & shafts 258Combustion engine 259Exhaust components & silencers 259Gaskets, packings, liners & sealings 260Gears 260Generators, alternators & dynamos 262Other engine & propulsion equipment 264Propellers & impellers 265Steering equipment & stabilizers 267Thrusters and pods 267Turbines & waterjet units 269Vibration absorbers & dampeners 269

POWER GENERATION, PROPULSION& MANOUVERING

133_304_CBS_2016.indd 257 07.08.2016 11:46:34


258

AGGREGATESRelevant system groups:109, 12, 309, 381, 40, 438, 439, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 861, 865, 867, 87, 871, 872, 875, 89, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. GENERATORS www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide

BEARINGSRelevant system groups:196, 3, 402, 412, 442, 6, 601, 63, 651, 7

BRAKES, COUPLINGS & SHAFTSRelevant system groups:3, 32, 324, 403, 406, 43, 432, 6, 601, 63, 651, 7, 8 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no BRAKE EQUIPMENT REXNORD Antriebstechnik, Dortmund, Germany: Electromagnetic, hydraulic and pneumatic operated brakes. KEB Antriebstechnik, Barntrup, Germany Electromagnetic operated brakes and clutches. KUMERA AS 3202 Sandefjord Telephone: +47-33 48 54 54 TRANSMISSION EQUIPMENT TRANSMISSIONS


133_304_CBS_2016.indd 258 07.08.2016 11:46:34

259


COMBUSTION ENGINERelevant system groups:109, 12, 381, 40, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 665, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 SERVOGEAR A/S 5420 Rubbestadneset Telephone: +47-53 42 39 50 PROPULSION SYSTEMS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine

With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise.

EXHAUST COMPONENTS & SILENCERSRelevant system groups:109, 601, 641, 651, 74, 743, 744, 745 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. SILENCERS We deliver any type of square and circular high efficiency silencers. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 SILENCERS


133_304_CBS_2016.indd 259 07.08.2016 11:46:34


260

ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 EXHAUST GAS ECONOMIZER

GASKETS, PACKINGS, LINERS & SEALINGSRelevant system groups:196, 303, 33, 404, 43, 442, 51, 522, 6, 601, 63, 651, 7, 898

GEARSRelevant system groups:109, 12, 33, 381, 40, 401, 442, 6, 60, 601, 61, 62, 63, 637, 638, 65, 651, 66, 7, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no GEARS SEW-Eurodrive a.s., Moss, Norway: Gearboxes, gearmotors, gearsystems.

FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. GEARBOXES Single Stage Gearbox The reduction gearboxes are designed for engines between 150 kW to 8000 kW. Maximum input speed is from 3200 rpm to 1000 rpm for the largest gearboxes. The reduction ratio is from 2:1 up to 10:1. The largest reduction is done by an additional gear train. The gearboxes can be delivered with PTO’s for hydraulic pumps or shaft generator. GXU Gearbox GXU gearboxes are designed for vessels where the size of the engine room is limited. The gearbox can be delivered with different center distances for best possible arrangement in the engine room. The gearbox is engineered with a solid design for high reliability in operation. PTO’s for hydraulic pumps or shaft generator can be delivered. Twin Input - Single Output Twin input - single output gearboxes is often used when variable power to the propeller is required. The gearbox can be operated with one or two engines at the same time. In vessel were extra reliability is required this is a good solution. The engines can either be placed in front or behind the gearbox. PTO’s for hydraulic pumps or shaft generator can be delivered. The gearboxes are manufactured with following main components: . Cast steel gearbox housing . Input shaft arranged for flexible coupling . Hydraulic operated multi-plate clutch for secure and soft engagement . Gearwheels with hardened and ground helical teeth for silent operating


133_304_CBS_2016.indd 260 07.08.2016 11:46:34

261


. Hydraulic built in servo unit for secure propeller pitch setting . Output shaft with flange arrangement for propeller shaft coupling . All bearings of roller type with a low friction losses and long lifetime . Spherical roller thrust bearing with a low friction losses and long lifetime All parts are made of the most suitable material qualities. JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 GEARS KUMERA AS 3202 Sandefjord Telephone: +47-33 48 54 54 GEARBOXES MARINE GEARS TRANSMISSION EQUIPMENT TRANSMISSIONS SERVOGEAR A/S 5420 Rubbestadneset Telephone: +47-53 42 39 50 GEARS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ELECTRIC MOTORS www.siemens.no/marine

AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional advantages include the reliable bearing design as well as rotors with aluminum die-cast cage for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs. FREQUENCY CONVERTERS www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems. Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled. GEARS AND TRANSMISSIONS www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide. LIFE CYCLE MANAGEMENT


133_304_CBS_2016.indd 261 07.08.2016 11:46:34


262

Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications.

GENERATORS, ALTERNATORS & DYNAMOSRelevant system groups:109, 12, 196, 376, 381, 40, 543, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 665, 79, 791, 792, 793, 795, 85, 86, 861, 865, 867, 87, 871, 872, 875, 89, 898 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. NITROGEN GENERATORS Since the first installation in 1984, our design has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading


133_304_CBS_2016.indd 262 07.08.2016 11:46:34

263


marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system. SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. GENERATORS www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide THERMAL TEC AS 2322 Ridabu Telephone: +47 62 58 59 30 GENERATOR SYSTEMS

WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no NITROGEN GENERATOR SYSTEMS Air-gas separation membranes are sensitive to contaminations from hydrocarbon aerosols/liquid (i.e. oil products) in the sense that such contamination cannot be removed nor can the membrane be regenerated, without running the risk of destroying the membrane. Most membrane based nitrogen generators have traditionally been equipped with oil lubricated feed air compressors, which increases the risk of oil contamination of the membranes. Traditionally, this problem has been dealt with by applying traditional filtration techniques upstream the membrane, and increasing the feed air temperature after filtration, in order to create a gap between the actual temperature and dew point temperature of oil & water vapor. Even though filtration equipment is installed, there will always be a risk of oil vapor carryover into the membrane. One of the situations that may contribute to this risk is that the traditional air-gas membrane normally has a recommended max. operating temperature of 50 °C. The compressor cooling water available may have a temperature of 36 °C, which, owing to the feed air temperature rise across the compressor, may result in a feed air temperature of as much as 46 °C, prior to the temperature increase required to avoid vapor condensation. This leaves us with a temperature gap of only 6 °C, which is not enough to avoid vapor condensation, because there is a temperature drop higher that this across the membrane, during the separation process. With the new ETech membranes, these problems are avoided, because, at first, the membrane material, polyamide, consists of a single composition, and not, as many other membranes, a dual composition, where the


133_304_CBS_2016.indd 263 07.08.2016 11:46:34


264

governing membrane is a thin layer applied on to a substructure. The two layers are normally of different materials. The polyamide may withstand a much higher temperature (typically as much as 130 °C), and may easily operate at a temperature of 60 °C, thus avoiding the risk of vapor condensation owing to lower operating temperatures. If however, there should be a vapor carryover, due to filtration failure or excess oil carryover from compressor, then the ETech membranes may be regenerated. ETech can therefore offer an exchange arrangement, provided that ETech membranes are already installed. It is quite apparent, the cost savings in such an arrangement, as opposed to purchasing brand new membranes. The Life Cycle Cost of Nitrogen generator can be reduced with as much as 60% compared to a normal membrane set up, and will also contribute to increased safety, in terms of regularity and system capacity.

OTHER ENGINE & PROPULSION EQUIPMENTRelevant system groups:196, 352, 381, 40, 601, 639, 651, 79 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no PROPULSION BRUNVOLL PROPULSION SOLUTIONS

Brunvoll is committed to developing new propulsion units with CPP technology. To complement our range with azimuth FPP Azimuth Thrusters, we are working together with Steerprop Ltd, in Finland. For conventional CPP propulsion, we have a collaboration with Finnøy Gear & Propeller to enable complete delivery of thruster units combined with main propulsion equipment including gears, shaft line, and propeller. This teamwork makes it possible for Brunvoll to offer coordinated systems for automation of propulsion and manoeuvring. CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no FLEXIBLE ENGINE MOUNTS Flexible engine mounts. Vibration, noise and shock control. KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 FUEL ECONOMIZING SYSTEMS


133_304_CBS_2016.indd 264 07.08.2016 11:46:34

265


PROPELLERS & IMPELLERSRelevant system groups:109, 12, 202, 381, 40, 404, 6, 60, 601, 61, 62, 63, 631, 634, 635, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no BOW PROPELLERS PROPELLERS The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters

- LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. PROPELLERS CP Propeller The CP Propellers are manufactured from 1000 mm to 5000 mm in diameter. They are delivered with 3, 4 or 5 blades. The propeller hub and blades are manufactured in Ni.Al.-bronze. They can also be delivered in Stainless steel. The hydrodynamic blade design calculations are based on detailed analysis in computers together with Finnøy’s long experience. The propeller shaft is hollow bored and made of carbon steel or stainless steel. The pitch is adjusted by the push - pull rod. It transfers the axial force from the servo piston in the gearbox to the pitch setting mechanism in the propeller hub. The propeller hubs, type P26 to P48, are grease lubricated and from P39 to P125 are oil lubricated. The stern tube is delivered complete with bearings, sealing boxes and a gravity tank for stern tube oil. The stern tube can be delivered suitable for either oil or water lubrication. The sealing boxes are Finnøy’s own design, but other types can also be supplied. The propeller shaft flange is a split type for the smaller shafts and an oil shrink type for the larger shafts.


133_304_CBS_2016.indd 265 07.08.2016 11:46:34


266

Benefits of controllable pitch propellers compared to fixed pitch propellers: . Secure and precise manoeuvrability . An increase in the average speed . Stern tube wear is reduced . A constant speed at engine is possible . Easy replacement of spare blades . Engine wear is minimized . Reduced fuel costs . Dynamic position of vessel possible . Stepless speed control of the ship . Load control of engine is possible . Full power available under all conditions . The propeller can be designed for free running and towing Propeller Design All ships have individual needs. Speed is important for some ships. Towing pull is more important for others. To satisfy these needs Finnøy use the most suitable software together with Finnøy’s knowledge when designing propeller blades. The propeller blade is designed for best possible performance regarding thrust, efficiency, noise and vibration. The blades are ground and balanced according to ISO 484 standards. Nozzle With ships that need maximum towing thrust a nozzle could be fitted. The nozzle increases the bollard pulls by approx 30%-40% over an open propeller absorbing the same power. It can be delivered as a steering or fixed nozzle. HELSETH A/S 6450 Hjelset Telephone: +47-71 20 29 00 Telefax: +47-71 20 29 02 PITCH PROPELLERS, CONTROLLABLE PROPELLERS

SERVOGEAR A/S 5420 Rubbestadneset Telephone: +47-53 42 39 50 PROPELLERS PROPULSION SYSTEMS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise.


133_304_CBS_2016.indd 266 07.08.2016 11:46:34

267


STEERING EQUIPMENT & STABILIZERSRelevant system groups:285, 40, 401, 403, 405, 637 HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 FIN STABILIZATION MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 STEERING GEARS SCANA MAR-EL AS 3880 Dalen Telephone: +47-35 07 58 00 STEERING GEARS

THRUSTERS AND PODSRelevant system groups:404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no Company brochures and datasheets are available on the Internet. AZIMUTH COMBI THRUSTERS AZIMUTH COMBI THRUSTERS Azimuth Combi Thrusters - a unique Brunvoll solution The Brunvoll Combined Retractable Azimuth/Tunnel Thruster is a retractable azimuth thruster that can also be used as a conventional tunnel thruster. It provides unique opportunities for innovative and flexible use of thruster functionality for different types of vessels. Technical features - Locking device to secure in stowed position - Electric motor integrated in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance AZIMUTH THRUSTERS, RETRACTABLE RETRACTABLE AZIMUTH THRUSTERS Demand is growing for Brunvoll’s Retractable Azimuth Thrusters


133_304_CBS_2016.indd 267 07.08.2016 11:46:34


268

Brunvoll Retractable Azimuth Thruster Systems have proved their reliability in challenging applications for Offshore Service Vessels, Shuttle Tankers, Coast Guard, Navy, Fishing and Research Vessels. These thruster systems provide manoeuvring capabilities that extend the operational weather window of the vessel, increasing capacity, flexibility, productivity, and safety. Technical features - Locking device to secure in stowed position - Electric motor in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance - Option for complete plug-in installation LOW NOISE TUNNEL THRUSTERS LOWNOISE TUNNEL THRUSTERS NO 1 in LowNoise Thrusters Brunvoll pioneered the LowNoise concept in 1977. Since then, we have continuously refined our solutions into a proven concept. Today, Brunvoll is recognized world wide as the major supplier of effective LowNoise thruster solutions. Noise levels of 75-88 dB(A) are typical in cabins next to and above conventional tunnel thrusters. Brunvoll’s advanced technology can cut this by up to 15 dB(A). Combined with other measures, noise reductions of up to 20-25 dB(A) have been verified. REM DRIVEN THRUSTERS (RDT) RIM DRIVEN THRUSTERS (RDT) The Brunvoll RDT Concept with major potential in different areas. The Brunvoll Rim-Driven Thruster saves space and lower environmental impact with exceptionally low noise.

The thruster, propeller and motor are in one compact unit There is no need for an external motor, shafts or couplings. Water-lubricated bearings eliminate the need for lube oil, and the risk of oil pollution. With no central shaft and no dynamic seals, there is less risk of damage due to line and rope entering the thruster. Permanent magnets provide greater flexibility in selection of motor speed (number of motor poles) and a motor with high efficiency running at a lower temperature. Planned development of the RDT concept - Retractable Azimuth - Flexibility - Efficient manoeuvring - Highly compact - small footprint - Minimal height - Minimal space needed - Can be placed in narrow skeg - Low noise and vibration THRUSTERS The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters


133_304_CBS_2016.indd 268 07.08.2016 11:46:34

269


- Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon TUNNEL THRUSTERS TUNNEL THRUSTERS Small or large - a comprehensive range of Tunnel Thrusters. We focus on developing ever more reliable, optimized and cost-effective systems . Refined continuously through 4 thruster generations We have delivered thousands of tunnel thrusters for fishing, cruise, naval, merchant and offshore vessels - a success story for generations. Standard & Customized Brunvoll offers a scope of supply to suit your needs. Our portfolio of in-house expertise enables us to develop effective solutions for challenging projects. Our design engineers work together with the yard’s hull design team to achieve cost-effective thruster installations.

TURBINES & WATERJET UNITSRelevant system groups:351, 61, 611, 621, 627, 75

VIBRATION ABSORBERS & DAMPENERSRelevant system groups:51, 6, 601, 651, 8 NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 FLOATING FLOORS


133_304_CBS_2016.indd 269 07.08.2016 11:46:34


270


133_304_CBS_2016.indd 270 07.08.2016 11:46:34

271


SPECIAL PURPOSE EQUIPMENTAnchor, pipe & cable handling equipment 272Anti-pollution equipment 273Cargo handling equipment 273Drilling equipment 275Fish farming equipment 275Fish processing equipment 275Fishing and hunting equipment 276Helicopter deck equipment 276Subsea & seismic equipment 277

SPECIAL PURPOSE EQUIPMENT

133_304_CBS_2016.indd 271 07.08.2016 11:46:34


272

ANCHOR, PIPE & CABLE HANDLING EQUIPMENTRelevant system groups:274, 43, 432, 433, 48, 6, 601, 798, 88 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. MOORING LINES 8-STRAND KARAT® MAXI Plus has become standard terminology in high quality mooring applications. Very high strength/weight ratio allows substantial size reductions and ease in handling, as well as providing excellent overall economy. The new KARAT® MAXI PLUS ropes have the same properties but offer a higher MBL and much better abrasion resistance. The new KARAT® MAXI PLUS is DNV Type approved. 8-STRAND EuroRope Marine supplies a wide range of KARAT® MAXI PLUS mooring tails to suit different dimensions steel wire mooring ropes. We can offer both single leg TAILS and double leg endless RINGTAILS. MOORING LINKS Tønsberg Mooring Link - galvanised steel mooring link of compact design typically utilised as connection between wire rope and fibre tail. Available in three sizes 90 T, 120 T and 180 T. 300 T can be supplied on special request.

WINCH LINES 6-STRAND KARAT® WINCHline combines the unique characteristics of the high strength KARAT®-fibres with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT® WINCHline is designed to be used on self tensioning winches and is DNV Type Approved. 6-STRAND BUOYANT WINCHlineT is a unique fibre rope with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHlineT is designed to be permanently floating and to be used on selftensioning winches. KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 ANCHOR HANDLING SYSTEMS KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 STREAMER HANDLING SYSTEMS


133_304_CBS_2016.indd 272 07.08.2016 11:46:34

273


ANTI-POLLUTION EQUIPMENTRelevant system groups:153, 17, 35, 382, 503, 582 IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 OIL SPILL RESPONSE MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 OIL SPILL DETECTIONS

CARGO HANDLING EQUIPMENTRelevant system groups:3, 307, 315, 32, 325, 327, 374, 376, 481, 7, 8 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com TANK GAUGING AND MEASUREMENTS Product groups - Ballast and service tank gauging - Cargo monitoring and control system, K-Gauge

- Crude oil interface Level Measurement system - Custody transfer system, K-Gauge CTS - Loading Computer system, C-Loading - Marine refit / Retrofit / Conversions - Radar based tank gauges - Tank overflow protection system MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 BOW LOADING SYSTEMS (BLS) STERN OFFLOADING SYSTEMS MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no FLEXIBARRIER FlexiBarrier is a product developed to cope with the rough handling of goods and containers offshore. Adjacent railing and protection systems in lay-down areas can often be damaged, causing work delays and safety problems. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com CARGO PUMPS LFL* Special Cargo Pumps Engineered solutions in full compliance with APEx / IMO 673 a.s.o. OSV Cargo Pumps


133_304_CBS_2016.indd 273 07.08.2016 11:46:34


274

PG-MACS patented, proprietary Multi Applicatio Cargo Solution CARGO SYSTEMS - Crude Cargo Systems - Deepwell Pumps - Gas Cargo Pumps - High Temp/High Viscocity Systems - Hydraulic Power Packs - LFL Special Cargo Pumps - Liquid Mug Agitators - OSV Cargo Pumps - Tank Cleaning Machines - Acid & Toxic Cargo Handling Solution CRUDE CARGO SYSTEMS Crude Cargo Systems Electric, hydraulic, or steam turbine driven cargo solutions for tonnage up to ULCC\’s SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. LASHINGS Lashings TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. CARGO REFRIGERATION Teknotherm cargo refrigeration plants can be supplied for ships carrying food for human consumption and industrial solids or liquids.

Refrigeration plants for full size reefers or partly refrigerated vessels carrying frozen or chilled goods are available as two different systems. Either as direct system with evaporation of the refrigerant directly in the aircoolers, or as indirect systems by means of circulating cold brine through the aircoolers. Teknotherm refrigeration plants for cooling of low boiling point liquids on board chemical tankers or product carriers are normally designed as indirect systems. The cargo is cooled by means of circulating a cold water/glycol mixture through cooling coils located in each cargo tank. RSW SYSTEMS RSW systems - Ideal for pelagic (purse seining and mid-water trawling) - Enables preservation of large catches, by cooling the catch rapidly to a temperature that allows storage on board over time, without significant reduction in quality - Has enabled large quality of mackerel, horse mackerel and herring to be used for human consumption - Improves quality on fishmeal by better rawmaterial - Reduced quotas set higher standards - better product means better price Teknotherm RSW plants mean rapid chill-down and storage of the catch in Refrigerated Sea Water. Storing the catch in RSW is an effective and cost-saving method of preserving the catch until landing ashore or further processing on board. The catch is brought down close to the freezing point of seawater in a minimum time by Teknotherm`s highly efficient RSW-chillers of flooded shell & tube type.


133_304_CBS_2016.indd 274 07.08.2016 11:46:34

275


TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. SIDELOADING SYSTEMS Side loading system - Conveyor system The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side loading conveyor system. SWLs range from 6-20 tonnes. The system offers the possibility of installing an outer platform which can be used for larger tidal variations, and is also ideal for reefer ships. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity Side loading system - Side Mover The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side mover system. SWLs for one lift range from 2-8 tonnes. The system is ideal for smaller dry cargo ships and offers the possibility of tandem operation of the lifts for handling long cargo. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity. Side loading system - Side Swinger The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side swinger system. SWLs for one lift range from 4-20 tonnes. Key benefits of

a side loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity.

DRILLING EQUIPMENTRelevant system groups:34, 344, 35, 375, 481

FISH FARMING EQUIPMENTRelevant system groups:46 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info AQUACULTURE Aquaculture

FISH PROCESSING EQUIPMENTRelevant system groups:25, 355, 46


133_304_CBS_2016.indd 275 07.08.2016 11:46:35


276

FISHING AND HUNTING EQUIPMENTRelevant system groups:317, 322, 432, 433, 461, 463, 464, 465 KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00Telefax: +47 52 85 68 02 FISH PUMPS NET HANDLING EQUIPMENT SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 CATCH MONITORING SYSTEMS TRAWL SONARS

HELICOPTER DECK EQUIPMENTRelevant system groups:566 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex HELICOPTER DECK, EQUIPMENT

- Helideck monitoring system - HMS 100 The helideck monitoring system is used to analyze helideck motion during helicopter landings to improve safety in hostile weather conditions. The HMS 100 monitors helideck attitude and vertical velocity, wind speed and direction, air temperature and barometric pressure and presents this information to indicate landing conditions. The HMS 100 is typically used offshore on floating production and storage vessels (FPSO) and seismic vessels. MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Company brochures and datasheets are available on the Internet. HELICOPTER DECKS Impressive weight reduction - no maintenance required - no painting - no repainting. Aluminium ensures a substantial weight reduction. The alloy used for Helidecks has the mechanical properties of mild steel and merely one-third of its weight. In addition, the extrusion technology provides the designers with possibilities that are impossible with steel. The Helidecks can be tailor made to fulfil the customer’s requirements and the delivery can differ from a package for container transport to a completely installed “turn key” Helideck with lighting, fire-fighting etc.


133_304_CBS_2016.indd 276 07.08.2016 11:46:35

277


SUBSEA & SEISMIC EQUIPMENTRelevant system groups:10, 196, 276, 3, 353, 354, 414, 438, 481, 6, 7, 802, 804, 81, 813, 821, 831, 871, 872, 875 KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 SEISMIC PRODUCTS KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com CAMERA SYSTEMS Product groups - Underwater Camera Systems - Industrial CCTV Camera Systems - Harsh Environment CCTV Systems: - Offshore Drill Support CCTV - Commercial Vessel CCTV - Other Marine CCTV - Naval Ships CCTV - Naval Submarine TV - Naval Underwater Vehicle and Diver Deployed Cameras UNDERWATER VEHICLES - AUV Product groups - HUGIN Autonomous underwater vehicles - REMUS Autonomous underwater vehicles - Underwater vehicle instruments - Launch and Recovery System - LARS for AUV and ROV - NavLab - Generic simulation and post-processing navigation software

Commercial off the shelf We design and manufactures the REMUS and HUGIN product lines of commercial off the shelf (COTS) autonomous underwater vehicles (AUV). REMUS has been a tremendous success with more than 200 vehicles (2012) delivered. Remus vehicles are used in a wide number of applications including navies, hydrography and marine research. HUGIN AUVs boast operational experience from commercial and naval operations. Hugin operations have taken place in all parts of the world, in shallow to deep water, in arctic and tropical waters. REMUS and HUGIN vehicles have different capabilities and thus different applications and roles. They are available with short delivery times. MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 OCEANOGRAPHICAL SYSTEMS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com SUBSEA PUMPING SOLUTIONS PG-MAPS PG-MAPS Quad 1500 PG-MAPS Quad 1500 (Patent Pending) represent the most novel, low shear, high efficiency, positive displacement pumping solution currently presented to the market.


133_304_CBS_2016.indd 277 07.08.2016 11:46:35


278

Well Stimulation, Boosting, Scale Squeeze, Chemical Injection, Kill Mud, Drill Cuttings, Water Injection and Sandaband a.s.o. are most relevant applications in the oil & gas sector


133_304_CBS_2016.indd 278 07.08.2016 11:46:35

279


STRUCTURES & OUTFITTING DETAILSBins, baskets, boxes and containers 280Brackets, bolts, fasteners and locking devices 282Davits and masts 282Ducts, channels, trays and pipe support 284Gratings & drains 284Hatches, covers, ports, ramps & platforms 285Ladders, railings, stairs, ramps & gangways 286Plates and profiles 287Sections, foundations, pillars, structural units andbulkheads 287Watertight/weathertight doors & windows 288

STRUCTURES & OUTFITTING DETAILS

133_304_CBS_2016.indd 279 07.08.2016 11:46:35


280

BINS, BASKETS, BOXES AND CONTAINERSRelevant system groups:315, 317, 322, 327, 362, 48, 481, 503, 505, 866 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. CONTAINERS Our AERON® container’s can be delivered both for marine and offshore applications. These can be delivered fully insulated and with necessary light, ventilation, cooling and heating. You only need to supply electricity and necessary water and ventilation ducts. We may deliver containers for storage of special equipment in ATEX or non ATEX, and containers with complete HVAC-R systems for accommodation or technical rooms. The systems may be designed according to customers’ requirements and all will be delivered in accordance with relevant rules and regulations. Typical applications: . Storage of lithium battery packages in ATEX with necessary HVAC . Storage of painting equipment in ATEX with necessary HVAC. . Container with complete HVAC Systems for accommodation . Container for cooling of Instrumentroom or

Technical rooms . Container with complete provision room cooling system . Containers for temporary refuges with necessary equipment. . Other tailor made solutions in ATEX or non ATEX. Examples of AERON® HVAC container. . Containers with Mist Eliminator louvers, Air Handling Units, fans etc. . Refrigeration machinery with air-cooled or water cooled condensers. . Cooling system with necessary heat exchangers, integrated pumps. . Complete solutions with integrated PLC automation & control system. ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no BATTERY BOXES Battery containers and battery racks for all types of vessels LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. BATTERY BOXES - Low weight - Maintenance-free - Self-extinguishing - Resistant to battery acid - Ventilated


133_304_CBS_2016.indd 280 07.08.2016 11:46:35

281


- Recommended by the Norwegian Maritime Directorate and Approved by Germanischer Lloyd CABINETS FOR EQUIPMENT Libra GRP Equipment Cabinets: The cabinets are used for Life Jackets, Survival Suits, Stretchers, Fire Fighting Equipment, First Aid Equipment, etc. LIGHT WEIGHT - THERMAL INSULATION - NO CORROSION CONTAINERS Libra Plast AS have many different GRP containers. Click on the usage area thats closes to your requirement. Libra GRP Battery Containers: Libra supplies between 500 and 1000 battery containers per year for the marine industry. Type Approved by GL. LIGHT WEIGHT - NO CORROSION Libra GRP Containers: Libra produces GRP Containers for multiple purposes for the offshore industry. They are mainly used to store MOB and Emergency Equipment on deck. You can find the following examples of a MOB Equipment Storage Cabinet Libra GRP Life Jacket Containers: Libra supplies Life Jacket Containers for the marine industry. Typical customers are Ferries, Passenger Vessels and Cruise Vessels. LIGHT WEIGHT - NO CORROSION LIFE JACKET CONTAINERS - Low weight

- Minimal maintenance - Stainless steel hasps - Hot galvanized steel supports - Ventilated MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. MUDBOXES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve


133_304_CBS_2016.indd 281 07.08.2016 11:46:35


282

- Gate Valve - Diaphragm Valve - Storm Flap Valve

BRACKETS, BOLTS, FASTENERS AND LOCKING DEVICESRelevant system groups:196, 3, 315, 317, 344, 431, 442, 503, 582, 6, 7, 743 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 SCREWS

DAVITS AND MASTSRelevant system groups:411, 412, 501, 502 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Company brochures and datasheets are available on the Internet. MASTS Masts Tactical masts for military use are one of the main product categories at Comrod France SA, the company’s French subsidiary.

All masts are manufactured at the company’s production facility in France. Lerc SA supplies telescopic, sleeve, man-pack, manual and motorised masts. The company can also provide a complete antenna and mast system for rapid deployment. Key features of the mast products include easy maintenance, standard and tailormade versions, and advanced control systems for unmanned use of the masts. Sleeve masts constitute the main product category in this segment. Lerc has superior expertise and a well-proven track record for calculating, designing and manufacturing masts, especially for large and heavy top-load applications. HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. DAVITS Harding’s unique Totally Enclosed Davit concept has established a new standard when it comes to safety, cost of installation and savings on mainetnance cost. The integration of highly efficient electrical and hydraulic systems into the davit structure provides optimal protection against wear and tear. The Total Enclosed Davit’s is intended for long term, reliable operation in harsh and hazardous marine and offshore environment. Then enclosed design also makes a perfect fit for operation under arctic climate conditions. Our davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98


133_304_CBS_2016.indd 282 07.08.2016 11:46:35

283


on Marine Equipment (MED). The carefully considered and epoch-making design of our NPD system is an advantage when it comes to maintenance and service, installation and deck preparations and for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch Ship Davits: Harding NPD series davits are specifically designed for safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments Rig Davits Harding NRD-series davits are specifically designed for the safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments. The davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98 on Marine Equipment (MED). Its carefully considered and epoch-making design, is an advantage when it comes to maintenance and service, installation and deck preparations, and also for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch. Our FAD davit system is ideal if you need

flexible hook distance. The fixed arms can be situated on deck according to your applicable hook distance. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com DAVITS Davits suitable for all MP craft can be offered in package with the craft. In co-operation with major davit manufacturers, Maritime Partner can deliver davits or cranes specially designed for all MP-craft. An optimal solution to fit on any vessel can be tailor made. Both for newbuildings or retrofitted to existing vessels. NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. DAVITS Lifeboat davits: - A-frame cantilever davits for marine and offshore. Life boats - “A Series” - Cantilever davits for platform installations and similar. Life boats - “C Series” - Cantilever davits for platform installations and similar. Life boats - “D Series” - Single pivot gravity davits for ships and similar. Life boats - “E Series” - Low build luffing davits for restricted height installation. Life boats - “LH Series” Rescue boat davits: - A-frame luffing davits for rescue & fast rescue


133_304_CBS_2016.indd 283 07.08.2016 11:46:35


284

boats - “NDA Series” - Cantilever davits for rescue & fast rescue boats - “NDC Series” Combi davits for rescue boats/ liferafts: - Slewing davits for life rafts and rescue boats - “NDSC Series” Free fall boat davits: - Free fall boat davits for ships and offshore installations. Lifeboats - “HD” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “H” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “SW” Series SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. DAVITS Davits TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet. FENDER DAVITS Fender Davits: TTS Marine AS is a supplier of dual point davits for fenders. TTS is specialized in creating solutions to meet your requirements.

We are able to offer davit and Yokohoma fender as a complete package RESCUE BOAT DAVITS Rescure Boat Datits TTS Marine AS is a supplier of single point davits for life saving equipment according to SOLAS (LSA). TTS has choosen DNV as a Notified Body and the standard davits are supplied with EC Type-Examination Certificate. TTS is specialized in creating solutions to meet your requirements and can also offer davit and boat as a complete package. VESTDAVIT AS 5160 Laksevåg Telephone: +47 55 54 92 00 Telefax: +47 55 34 24 04 DAVITS

DUCTS, CHANNELS, TRAYS AND PIPE SUPPORTRelevant system groups:51, 88

GRATINGS & DRAINSRelevant system groups:1, 15, 196, 505, 52, 53


133_304_CBS_2016.indd 284 07.08.2016 11:46:35

285


HATCHES, COVERS, PORTS, RAMPS & PLATFORMSRelevant system groups:30, 303, 304, 311, 374, 51, 52, 53, 601, 651, 79 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. HATCHES Libra’s weathertight hatches type WTH are made of GRP sandwic. Low weight makes this hatch easy to operate and open, and is above all important through emergency hatches during escape. - High strength - Low weight - No corrosion = Low maintenance - Weight saving - app. 60% less than steel Steel, alu. or GRP hatches available Raised, flush or emergency type with spring hinges. TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet.

SERVICE PLATFORMS Service platforms: TTS has designed a range of platforms for use in routine service work and installation, significantly including tunnelling work for the mining industries. The platforms all feature double or triple-telescopic booms and are built with strong and rigid support. Over 2,700 TTS service platforms have been delivered to customers around the world, all supplied ready for connection to the customers’ hydraulic system. TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. HATCH COVERS Offshore - Hatch Covers Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. TTS Ships Equipment AS can supply different type of hatch covers as Sliding type, Side hinged single flap, etc. Tailor made solutions are available upon request, depending on ship design and purpose. MOON POOL HATCH COVERS Offshore - Moon Pool Hatch Covers Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. Moon pool hatch covers are based on standard hatch cover design principles with special attention to slamming forces and bottom sea


133_304_CBS_2016.indd 285 07.08.2016 11:46:35


286

pressure. Tailor made solutions are available upon request, depending on ship design and purpose. .Top sliding .Top 1 or 2 sections .Top folding .Bottom sliding .Bottom 1 or 2 sections .Bottom folding

LADDERS, RAILINGS, STAIRS, RAMPS & GANGWAYSRelevant system groups:503, 52, 533, 564 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Company brochures and datasheets are available on the Internet. ACCOMMODATION LADDERS Marine Aluminium can supply a wide range of Accommodation ladders including: - Telescopic ladders - Fixed ladders - Bulwark ladders - Pilot ladders The accommodation ladders and gangways can be made with: - curved steps, - fixed ribs - perforated non-slip grating - adjustable steps The ladders will be custom built according to your specification. Some items are however also in stock.

GANGWAYS Marine Aluminium was the first, and is by far the most experienced manufacturer of aluminium gangways in the world. Marine Aluminium’s telescopic gangways are a very important offshore safety feature, and although the main purpose is personnel access between offshore installations, it can also be used to support utility transfer lines for fuel, mud, electricity and water. RAILING SYSTEMS The field installed railing systems are highly versatile and can be adapted to any structure. The advantages of using field installed railing systems are the reduced weight, easy installation and ease of modification or configuration. The system can be installed offshore without any hot work. STAIRWAYS Marine Aluminium Stairways are an integrated part of the Marine Aluminium Railing System. The stairways can be delivered as completed assemblies, designed and built to meet each customer’s unique requirements or have the stairway system built on site if preferred. Marine Aluminium’s flexible system designs make either option possible. TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. RAIL TRANSFER SYSTEM The Ship Rail Transfer System is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects.


133_304_CBS_2016.indd 286 07.08.2016 11:46:35

287


The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 350 tons. .The transfer system operates on one level .No pit required .Flush rails will allow for cross traffic all over the yard

PLATES AND PROFILESRelevant system groups:196 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. PROFILE AND BEAM CUTTING LINES For processing profiles and beams, TTS offers fully automated cutting lines with integrated systems for handling and robotic cutting. A TTS profile and beam cutting line deliveres consistent high quality cuts on all kinds of profiles and beamsflatbars, bulb profiles, angles, T-beams and U-channels. TTS Interactive Macro Assignment for Cutting - CIMA, is a PC based software package used for offline programming of profile parts. The profile and beam cutting line is a module-based system that can be intergrated to form a complete system, suitable for larger shipyards and the heavy steel industries, as well as smaller steel production facilities. Features that may be included are:

.Logistics system for transport, processing and buffering of all types of profiles .Integrated PC and PLC control system .3D sensing and compensation .Accurate length measuring system .Scrap and small piece handling .Text and ID marking of profiles .Reference line marking .Bending line marking .Automatic drying of profiles .Edge celaning of profiles .Profile grinding and sorting system Minimal installation and start up time is achieved through full scale testing of each cutting system before shipment to customer.

SECTIONS, FOUNDATIONS, PILLARS, STRUCTURAL UNITS AND BULKHEADSRelevant system groups:201, 30, 38, 48, 524, 58, 583 KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 DECK EXTENDERS SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Company brochures and datasheets are available on the Internet.


133_304_CBS_2016.indd 287 07.08.2016 11:46:35


288

DECK SELFSMOOTHING SCREED Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound

WATERTIGHT/WEATHERTIGHT DOORS & WINDOWSRelevant system groups:109, 304, 51, 512, 513, 514, 515, 52, 53, 57, 951 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. WEATHER LOUVERS Humidity does more damage than most people realise. Humidity leads to corrosion which

will shorten the lifespan of machinery, metal structures, electrical installations and electronic systems. Installation onboard offshore platforms and various types of ships are often exposed to extreme environmental conditions. Louvers in general, particular the intake louvers, are often exposed to larger amounts of water from heavy rain, strong winds, green sea and water spray. To ensure the longevity of the louvers, but also to increase the lifespan and performance of machinery, electronic systems and more, a well dimensioned and high quality intake louver systems is always well invested money. AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks. ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 DOORFRAMES WINDOW FRAMES


133_304_CBS_2016.indd 288 07.08.2016 11:46:35

289


IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 DOORS, WATERTIGHT SAFETY WINDOWS LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. DOORS Watertight doors. Weathertight doors. Watertight and weathertight in A0 and A60. Spraytight bulkhead doors, insulated. Hatches, flush/raised DOORS, LIGHTWEIGHT Libra Accommodation Composite Doors (AC): Lightweight, non-combustible interior doors for High-Speed and Light Craft Vessels. EXTREMELY LIGHTWEIGHT - EASY TO INSTALL - GOOD DESIGN Libra Lightweight Sandwich Doors (HSC): Libra Lightweight Doors (HSC) have been designed to comply with the HSC code (High-Speed and Light Craft regulations). In addition, these doors are ideal for Ferries, Cruise Vessels, Marine Vessels, Yachts, etc. DOORS, SPRAYTIGHT Libra Spraytight GRP Doors (ISD): Libra Spraytight Doors (ISD) are made from Glassfiber Reinforced Polyester (GRP) composite. The weight of the GRP Doors is only

1/3 of steel doors and the sandwich construction gives them excellent thermal insulation. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. .Steel or Aluminium coamings .Single dogs or Quick Acting .Delivered with either 30mm or 100mm corner radius Libra Spraytight Steel Doors and Hatches (SR): Libra Spraytight Doors (SR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. Libra Spraytight Aluminium Doors and Hatches (SR) Libra Spraytight Doors (SR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. DOORS, WATERTIGHT Libra Watertight Steel Doors and Hatches: Libra Watertight Steel Doors have DNV type approval certificate and comply with International Load Line Convention 1966 DNV-OS-C301, the Norwegian Veritas’ rules for Classification of Mobile Offshore Units. Libra Watertight Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate water plane according to damage stability calculations. Libra Watertight Steel Doors may also be used in connection with SOLAS Chapter II-1 Part B Regulation 20-2.2, and the Stockholm Agreement. Libra Watertight Steel Doors may also be used below bulkhead deck in positions where a


133_304_CBS_2016.indd 289 07.08.2016 11:46:35


290

hinged door is acceptable, and where the actual water pressure is 50kN/m2 or less. Libra Watertight Aluminium Doors and Hatches: Libra produces Watertight Aluminium Doors on request. These doors will be made in accordance with the requirements set by Classification Societies. Libra A-60 Fire-rated Watertight Steel Doors and Hatches: Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Watertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations/Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Watertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. Libra Watertight A-60 Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate waterline according to damage stability calculations. The Libra Watertight A-60 Steel Doors may also be used on cargo vessels (SOLAS Chapter II-1 Part B-1 Regulation 25.9) above equilibrium or intermediate waterline according to damage stability calculations, and these doors can also be used in connection with SOLAS II-1/20-2.2 and the Stockholm Agreement.

Libra Watertight A-60 Steel Doors may be used below bulkhead deck in positions where a hinged door is acceptable and where the actual water pressure is not greater than the design pressure given by DNV. DOORS, WEATHERTIGHT Libra Weathertight GRP Doors (WTD): Libra Weathertight Composite Doors and Hatches are built in compliance with the International Load Line Conventions and are Type Approved by most Classification Societies. LIGHT WEIGHT - EXCELLENT THERMAL INSULATION - NO CORROSION. Libra Weathertight Steel Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as external bulkhead doors on weather deck (positions 1 and 2), where sill height of 380 / 600mm is required. Both standard and custom sizes are available. Libra Weathertight Aluminium Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as external bulkhead doors on weather deck (position 1 and 2), where sill height of 380 / 600 mm is required. Libra A-60 Fire-rated Weathertight Steel Doors and Hatches:


133_304_CBS_2016.indd 290 07.08.2016 11:46:35

291


Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Weathertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations / Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Weathertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. The Libra Weathertight A-60 Steel Doors may be used in access openings according to DNV Ship Rules Part 3 Chapter 3 Section 6 and the International Convention on Load Lines Chapter II Regulation 12 NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 DOORS DOORS, WEATHERTIGHT FIRE RATED WINDOWS SHIPS’ WINDOWS TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet.

EXTERNAL SIDE DOORS External side doors Offshore vessels are often built to comply with specific customer demands and are therefore tailor-made. TTS Ships Equipment offers a variety of equipment configurations to help meet these needs. The purpose of an offshore ROV (Remote Operated Vehicle) side door is mainly to deploy and retrieve subsea vehicles. The door must be designed to withstand operation in heavy seas and rough weather. TTS Ships Equipment delivers a number of different door configurations, all designed for operational flexibility, reliability and watertightness. .Top hinged .Side hinged .Bottom hinged .Sliding .Roller gate .Railing door .External Door/platform HANGAR DOORS Hangar Doors Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. Offshore vessels often have an enclosed hangar for storage of equipment or for sheltering offshore operations. The rear deck is then accessed through a door in the aft end of the hangar. TTS Ships Equipment offers all kinds of door configurations: the most important design principles being compact construction, light weight and operation on a limited free space either on deck or in the hangar. A number of door types can be delivered either with outwards or inwards opening depending on the aft deck and hangar layouts.


133_304_CBS_2016.indd 291 07.08.2016 11:46:35


292

VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. DOORS TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.


133_304_CBS_2016.indd 292 07.08.2016 11:46:35

293


TANKS AND HEATING/COOLING EQUIPMENT

Boilers, burners and incinerators 294Cooling components for fluids 299Evaporators, condensers and receivers 300Heat exchangers & steam generation 301Preheaters 302Tank cleaning equipment 302Tanks 302Thermal compensators 303


133_304_CBS_2016.indd 293 07.08.2016 11:46:35


294

BOILERS, BURNERS AND INCINERATORSRelevant system groups:445, 481, 577, 58, 581, 61, 64, 641, 644, 646, 703, 841 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. HYDROGEN RECOVERY SYSTEMS Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors. FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. OIL BURNERS Oil burners Separate control panels and accessories for oil burners. KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 OIL RECOVERY HANDLING SYSTEMS

PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. BOILERS Parat boilers. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our clients and customers can rely on being handed the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close. CENTRAL HEATING BOILERS Parat central heating boilers. DONKEY BOILERS Parat auxiliary boilers and exhaust boilers. ELECTRICAL CIRCULATION STEAM BOILERS ECS - ELECTRICAL CIRCULATION STEAM BOILERS


133_304_CBS_2016.indd 294 07.08.2016 11:46:35

295


The PARAT Electrical circulation steam boiler was designed to meet the request for a modular and easy to install alternative to MGO fuel for auxiliary boilers on existing vessels in operation. By integrating the ECS in your boiler you have the option to maintain your steam pressure from an electrical power source (shore power, spare generator power etc.). The unit can be installed on any kind of existing steam boiler system and is also a good solution for newbuilds where increased fuel flexibility for the steam system is required. The electrical cabinet is not directly connected to the boiler unit. This ensures a low temperature in the electrical components. The cabinet is standardized, and type approved according to the NEK 400. Included are fuses, contactors and complete safety system. As an option the unit can be delivered with a main power switch. The boiler unit is designed for vertical or horizontal installation depending on the layout and space availability around the main auxiliary boiler. Inlet and outlet connections to main boiler will be done on site. The ECS can be delivered as a standard modular unit in capacities up to 400kW, which is equivalent to 600kg steam per hour. Larger capacities can be provided upon request. ELECTRICAL STEAM BOILERS The Parat Electrical element boiler can be delivered with capacity up to 5000 kW. With our 40 years of experience in marine boilers PARAT has landed on a rugged design that fulfills all class requirements. The electrical element boiler is very compact, and one of the greatest advantages with this product is the possibility of low load regulation, down to 15 kW. No smoke stack is needed, thus saving space and costs. The electrical cabinet is not directly connected to the boiler. This ensures a low temperature in the electrical components. The cabinet is

standardized, and type approved according to NEK 400. Included in the cabinet is the main switch, fuses, contactors and a complete safety and control system. This system is based on a Siemens PLC SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible, via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system. For vessels with ORO operation class, Parat has developed a successful package containing a heat exchanger for the hot water system and steam lances for heating of the ORO tanks. The patended Parat MEL-C was developed to meet the demand for a compact and flexible system that allows the operator to use one boiler system for both steam and hot water production. In normal operation the boiler generates hot water at an operating temperature of 90oC. When there is a requirement for steam production the water level in the boiler is reduced to provide a sufficient steam separation area. Hot water production is maintained separately by an electric heater in a bypass circuit. The MEL-DC was developed to enable connection to direct current power supply. It is based on our standard MEL low Voltage boiler but with specialized immersion heaters and control panel. ELECTRO BOILERS Electrical boilers With decades of experience with various electrical steam and hot water boilers for land based industry PARAT is in a unique position to provide boilers for vessels with modern and often ground breaking propulsion and power generation systems. Zero emissions, small footprints and simple installation and operation make our electrical boilers the perfect solution for steam and heat


133_304_CBS_2016.indd 295 07.08.2016 11:46:36


296

generation aboard the futures most energy efficient vessels. The following pages give a brief introduction to our electrical boiler range. EXHAUST BOILERS Parat exhaust boilers for hot water and steam. Utilizing the waste heat from engines and generators is a good way to save fuel and space and at the same time reduce harmful emissions to the atmosphere . Parat specializes in custom designed boilers and economizers for any vessel and engine type with the focus on providing the user with the most compact and efficient solution available. Since the worlds first composite boiler left our factory in 1972, we have continued innovating and are able to supply any standard or custom made heat recovery solution for all kinds of engines or generators. The following pages give a brief overview of our products under the category exhaust gas boilers. EXHAUST GAS SMOKE TUBE BOILER The smoke tubes pass through the boiler and the exhaust gas flows inside the tubes. This construction makes the boiler suitable for connection to more than one engine with separate exhaust gas sections in one boiler. The boiler can either work with forced circulation with evaporation in a separate steam drum or as a natural circulating boiler with a built-in steam drum at the top. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boiler is pre-assembled and delivered as a complete unit.

EXHAUST GAS WATER TUBE BOILER The water tube boiler consists of finned tube or bare tube bundles mounted together in sections. The water circulates through the tubes and the extended heating surface on the exhaust gas side makes this boiler compact. The water flow is generated by circulation pumps and evaporation takes place in the boiler. The water/steam mixture is then separated in a steam drum or in an auxiliary boiler. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boilers are pre-assembled and delivered as a complete unit. Needs proper water treatment and cleaning. SMOKE TUBE / EXHAUST GAS BOILER The boiler is of vertical design with smoke tubes through the boiler and steam evaporation at the upper section. The boiler is constructed from drawings approved by all classification societies and delivered with equipment in accordance with class requirements. The combination of both an oil fired section and exhaust gas section in the same boiler leads to a simpler and more economical steam system on board. A two in one system is less expensive to install than two separate boilers. A combined system is easy to service and maintain, thus providing cost savings during the lifetime of the ship. Capacity of the exhaust gas section will depend on the exhaust gas quantity and temperature. The principle of the boiler is based on a common water and steam space and separate sections for oil firing and exhaust gas. If several engines are utilized, the boiler can be delivered with several separate exhaust gas sections. The boiler comprises smoke tubes both for the oil fired and the exhaust gas section. From the top of the boiler there is good access to the tubes which make service and maintenance easy.


133_304_CBS_2016.indd 296 07.08.2016 11:46:36

297


A main feature of the boiler is its automatic mode. When this mode is activated, the exhaust gas section becomes the main heating source. If the capacity is too small and the steam pressure drops, the oil burner automatically ensures correct pressure. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. Operation of the boiler control panel is done from the local touch screen. Boiler PLC can be connected to the main control system by standard ethernet/profibus/modbus communication. HIGH VOLTAGE ELECTRODE BOILERS PARAT MEH High voltage electrode boilers The PARAT High Voltage electrode boiler can be delivered with a capacity up to 50 MW. With 40 years of experience in marine boilers we have developed a rugged design that fulfills all class requirements. The new electrode system for marine use, is a result of many years of experience combined with an innovative design. The high voltage electrode boiler is extremely compact. The cost savings on ships is significant, since no transformer or low voltage cables are needed, thus reducing both installation costs, space requirements and maintenance. The electrical control panel includes a complete safety and control system. This system is based on a Siemens SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system. HOT WATER BOILERS MVH Vertikal Hot Water Boiler

The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication. MAIN BOILERS Parat steam boilers. Capacity 500 - 25.000 kg/h. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our clients and customers can rely on being handed


133_304_CBS_2016.indd 297 07.08.2016 11:46:36


298

the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close. STEAM BOILERS Parat steam boilers. Capacity 750 - 25.000 kg/h. Parat oilfired steam boilers, exhaustì gas boilers or combined exhaust gas/oilfired steam boilers TOP FIRED WATER TUBE BOILERS PARAT MKS Marine Top Fired Water Tube Boiler The PARAT top fired water tube boiler is a fully automatic steam boiler.A sufficiently dimensioned steam drum makes the boiler suitable for evaporating steam from additional external exhaust gas boilers. The design and performance is a result of solid experience and high technical standards. The boiler is supplied with a circular furnace, constructed from membrane walls and convection sections with a combination of bare tubes and pin tubes. The heat flows cross sectional with a high flue gas velocity. With this unique design, both improved performance and reduced maintenance is achieved. The boiler fulfills the most stringent equipment standards and is available with certificates from all major class societies. Fittings and equipment are in accordance with class requirements. Our main equipment manufacturers supply high standard products. The steam atomizing burner can be supplied for oil, gas or dual fuel. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic and electric/pneumatic actuators. All operation from the boiler control panel is done from the local touch screen. Boiler PLC can be connected to

the main control room with standard ethernet/profibus/modbus communication. Maintenance and inspections can be carried out through large inspection doors. An automatic steam cleaning system is installed between the tube sections. The boiler is preassembled and delivered as complete unit incl. insulation and fittings. VERTICAL PIN-TUBE BOILERS PARAT MPW Marine Vertical Pin-Tube Boiler The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.


133_304_CBS_2016.indd 298 07.08.2016 11:46:36

299


TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Company brochures and datasheets are available on the Internet. INCINERATORS Incinerator E-mail: [email protected] Phone: +47 37 19 98 00 Spare Parts E-mail: [email protected] Phone: +47 37 19 98 00 Service E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Incinerators - safe and efficient waste management: TeamTec AS is a leading manufacturer of incinerators, with more than 11,000 units sold worldwide since 1972. The TeamTec Incinerators provide safe and efficient waste management, which complies with the IMO regulations for both waste oil and solid waste incineration. TeamTec supplies a wide range of incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts. TeamTec Bilge water injection solutions: TeamTec water injection system for the TeamTec Incinerators is an efficient and automated disposal system for contaminated water. The system reduces operating issues related to OWS, increase sludge burning capacity and reduce NOX emissions. Older incinerator models can easily be upgraded with TeamTec’s certified water injection upgrading kit. TeamTec After Sales - worldwide service and spare parts: TeamTec provides comprehensive after sales service for all TeamTec products worldwide: spare parts, commissioning, repair service, pre-installation survey, service agreements, training and general technical support.

THERMAL TEC AS 2322 Ridabu Telephone: +47 62 58 59 30 EXHAUST GAS BOILERS ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 INCINERATORS

COOLING COMPONENTS FOR FLUIDSRelevant system groups:355, 362, 554, 584, 7, 70, 71, 722 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. COOLING WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.


133_304_CBS_2016.indd 299 07.08.2016 11:46:36


300

SPERRE INDUSTRI AS 6057 Ellingsøy Telephone: +47 70 16 11 00 COOLERS

EVAPORATORS, CONDENSERS AND RECEIVERSRelevant system groups:355, 37, 58, 611, 64, 761, 794 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. TANK DRYING Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet.

STEAM TRAPS Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet.


133_304_CBS_2016.indd 300 07.08.2016 11:46:36

301


CONDENSERS Large assortment in refrigeration condensers Service.

HEAT EXCHANGERS & STEAM GENERATIONRelevant system groups:36, 577, 581, 64, 647, 648, 649, 7, 72, 74, 794, 89, 897 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 WATER HEATERS ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. HEATING PLANTS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.

PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. FEEDWATERTANK / DEGASSER Parat IMR/IMT Feedwatertank / Degasser HEAT RECOVERY UNITS Parat heat recovery units. STEAM GENERATORS Parat steam generators from 200 - 4.000 kg/h. THERMAL OIL HEATERS Parat thermal oil heaters. Output up to 7 MW. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PLATE HEAT EXCHANGERS Sondex, Denmark Plate heat exchangers. PLATE HEAT EXCHANGERS PHE Gasketed Plate Design By means of technological innovation SONDEX has developed and designed a new generation of plate heat exchangers.


133_304_CBS_2016.indd 301 07.08.2016 11:46:36


302

THERMAL TEC AS 2322 Ridabu Telephone: +47 62 58 59 30 STEAM GENERATORS

PREHEATERS Relevant system groups:70, 703, 71 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. OIL PREHEATERS Oil pre-heaters

TANK CLEANING EQUIPMENTRelevant system groups:382, 444 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com TANK CLEANING MACHINES SC 15 TW Fixed

SC 15 TW Portable tankcleaning systems specially developed for: Crude oill carriers Offshore Supply Vessels OBO carriers Product carriers Industrial applications Chemical carriers Bulk carriers Models SC 15 TW is media driven tankcleaning machines of twin nozzle type. SC 15 TW can be used either as portable machines on flexible hoses or as fixed submerged mounted machines. The machines can also be fixed installed on a extension pipe through the main deck. ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 TANK HEATING SYSTEMS

TANKSRelevant system groups:23, 285, 601, 641, 651, 70, 71, 73, 731, 732, 734 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no


133_304_CBS_2016.indd 302 07.08.2016 11:46:36

303


TANK HEATING SOLUTIONS Tank Heating Solutions for Oil Spill Response Vessels Oil spill incidents are unplanned and unwanted events that can have dire consequences for the environment and fragile ecosystems around the globe. Fast response combined with the correct equipment able to cope with any type of hydrocarbon emulsion is vital to minimize the risk involved in extracting, processing and transporting petrochemicals outside our coastlines. Parat Halvorsen, in close cooperation with yards and ship owners, has developed a system that strengthens one vital part of the response value-chain in a very cost efficient way. A heating system that is fully integrated into the response vessels utility and heat recovery loop - and that in moments can be re-mobilized to deliver steam through specially engineered injection nozzles into the tanks that carry recovered hydrocarbons.

THERMAL COMPENSATORSRelevant system groups:601, 641, 651, 74, 743


133_304_CBS_2016.indd 303 07.08.2016 11:46:36


304


133_304_CBS_2016.indd 304 07.08.2016 11:46:36

305

SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133 INDEX TO THE SFI-SYSTEM GROUPS Numeric

Then products are also associated with relevant functions or systems according to the well-known SFI system, a group system widely used within the maritime sector.

For instance, products that earlier would belong to the group “deck cranes” will now be classified as component group “Cranes, crane equipment, etc” and then among the system group “Deck cranes for cargo” (SFI 33). This means that the product in the online version will be shown when searching for cranes in general, and at the same time searching for cargo handling equipment.

305-372_SFI_216.indd 305 07.08.2016 11:46:52

306

SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133

1 - SHIP GENERALBridge inventory & equipment Control & automation systems Project management, construction management

10 - SPECIFICATION, ESTIMATING, DRAWING, INSTRUCTION, COURSESBasic design & project development services Construction/fabrication software Engineering services Engineering software (CAD, analysis) Furniture & cabinets Project management, construction management Subsea & seismic equipment

101 - CONTRACT/SPECIFIC. WORK, GENERAL DESIGN, MODEL TESTINGConstruction/fabrication software Engineering software (CAD, analysis) Maintenance, spare parts and supplies Other construction assistance (cleaning, rigging, stores, support)

102 - DRAWING, ORDERING ETC. WITH REGARD TO HULLAluminium

103 - DRAWING, ORDERING ETC. W.R.T. EQUIPMENT FOR CARGO

104 - DRAWING, ORDERING ETC. W.R.T. SHIP EQUIPMENT

105 - DRAWING, ORDERING W.R.T. EQUIPMENT FOR CREW, PASSENGERS

106 - DRAWING, ORDERING W.R.T. MACH. COMPONENTS, MACH/SHIP SYSTEMS

107 - ESTIMATING, DRAWING, OFFERS W.R.T. CHANGE ORDERS

108 - PURCHASE/RENTING OF DRAWINGS, PATENTS, LICENCES, CONSULTATIONBasic design & project development services Engineering services109 - MAINTENANCE SYSTEMS, INSTRUCTION MATERIALAggregates Alarm equipment Centrals, consoles & panels Combustion engine Computer hardware Construction/fabrication software Control & automation systems

305-372_SFI_216.indd 306 07.08.2016 11:46:52

307


Converters (voltage, frequency), receivers, el. dampers and rectifiers Documentation & data management Electrical motors & starters Engineering services Exhaust components & silencers Gears Generators, alternators & dynamos Inspection and testing (NDT, pressure, performance, trial trip, etc) Interior doors & windows Maintenance, spare parts and supplies Meters & indicators Monitoring equipment Onboard software Project management, construction management Propellers & impellers Regulators & switches Safety equipment Sensors, gauges & detectors Switchboards & relays Watertight/weathertight doors & windows

11 - INSURANCE, FEES, CERTIFICATES, REPRESENTATIONAdministration, broking, finance & insurance services Construction/fabrication software Engineering software (CAD, analysis)

111 - GENERAL INSURANCE

112 - CLASSIFICATION AND STATUTORY FEES AND CERTIFICATESDocumentation & data management Inspection and testing (NDT, pressure, performance, trial trip, etc) Inspections & testing equipment

12 - QUALITY ASSURANCE, GENERAL WORK, MODELSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Construction/fabrication software Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters

305-372_SFI_216.indd 307 07.08.2016 11:46:52

308


Engineering services Engineering software (CAD, analysis) Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

121 - QUALITY ASSURANCE, PLANNING, WORK PREPARATIONConstruction/fabrication software Engineering software (CAD, analysis) Pipes & pipe units Project management, construction management Workshop equipment

122 - WORK MANAGEMENT, FIRE GUARD, SUPERVISION, WATCH KEEPING

123 - CLEARING, CLEANINGChemicals Cleaning equipment Workshop equipment

124 - SNOW CLEARING, DE-ICING

125 - TRANSPORTATION (EXCL. HULL PARTS)

127 - MODELS, ALBUMS, PHOTOS

13 - PROVISIONAL RIGGING

131 - PROV. GANGWAYS, ROOFS, HATCHES, STAIRS, STAGES FOR HULL EXT.

132 - PROV. ROOFS, HATCHES, STAGES F. DECK HOUSES, SUPERSTR. EXT.

133 - PROV. HATCHES, LADDERS, STAGES IN CARGO HOLDS/TANKS

134 - PROV. HATCHES, LADDERS, STAGES IN ENGINE ROOM AND ACCOMMOD.

135 - PROV. ELECTRIC POWER, LIGHTING, MACHINERY

136 - PROV. STEAM, WATER, HEATING, VENTILATION PLANTS

305-372_SFI_216.indd 308 07.08.2016 11:46:52

309


137 - PROV. GAS, OXYGE, COMPRESSED AIR PLANTS

138 - TARPAULIN RENTALS

139 - PROV. LIFTING, TRANSPORT EQUIPMENT

14 - WORK ON WAYS, LAUNCHING, DOCKINGAlarm equipment Basic design & project development services Control & automation systems Engineering services Monitoring equipment Positioning & navigation equipment Project management, construction management

141 - KEEL BLOCKS, PILLARS, CUSHIONS

142 - LAUNCHING ARR. W/CRADLE, SUPPORTS, WATER FILLING, PLATFORM

143 - CREW, PILOTS, TUGS, CLEARING AT LAUNCHING

144 - DRY DOCKING, SLIP DOCKINGRepairs, modifications & docking

145 - SHIFTING, TOWING (EXCL. LAUNCHING)

146 - GAS FREEING, TANK CLEANING

147 - BERTHING, ANCHORAGE

15 - QUALITY CONTROL, MEASUREMENTS, TESTS, TRIALSInspections & testing equipment

151 - MACHINERY TESTINGInspection and testing (NDT, pressure, performance, trial trip, etc) Meters & indicators Sensors, gauges & detectors

152 - CAPACITY, INCLINATION, VIBRATION MEASUREMENTS

153 - FUEL AND LUBE OIL FOR TESTS AND TRIAL TRIPSAnti-pollution equipment

305-372_SFI_216.indd 309 07.08.2016 11:46:52

310


155 - SPECIAL TESTS/TRIALS

16 - GUARANTEE/MENDING WORKAdministration, broking, finance & insurance services

17 - SHIP REPAIR, SPECIAL SERVICESAlarm equipment Anti-pollution equipment Basic design & project development services Cleaning equipment Control & automation systems Engineering services Inspection and testing (NDT, pressure, performance, trial trip, etc) Maintenance, spare parts and supplies Monitoring equipment Other construction assistance (cleaning, rigging, stores, support) Positioning & navigation equipment Power cables Project management, construction management Repairs, modifications & docking

171 - DISPOSAL OF WASTE, GARBAGE, OIL, CHEMICALS

172 - CRANE ASSISTANCE TO SHIP’S CREW

173 - TRANSPORT OF YARD PERSONNEL

174 - TOILET AND WASH ROOM OUTLETS

175 - SERVICES TO SHIP’S CREW (MEALS ETC.)

19 - CONSUMPTION ARTICLES

191 - ELECTRODESWelding & cutting equipment

192 - GAS, OXYGEN, COAL, OILAdditives & agents Coatings & paint Lubricants Monitoring equipment Project management, construction management

193 - TOOLS, JIGS

305-372_SFI_216.indd 310 07.08.2016 11:46:52

311


194 - BINDING AND MENDING MATERIAL, CLEANING ARTICLESOther materials

196 - MISCELLANEOUS CONSUMPTION ARTICLESAdditives & agents Aluminium Bearings Brackets, bolts, fasteners and locking devices Chemicals Cleaning equipment Consumables Detection & identification equipment Fire protection & detection equipment Generators, alternators & dynamos Gratings & drains GRP/FRP Hoses, drums, packings & fittings Lifesaving equipment Machinery and piping work Other air/gas/pneumatic equipment Other engine & propulsion equipment Other inventory Other materials Personal equipment Pipes & pipe units Stainless steel Steel Subsea & seismic equipment Workshop equipment

305-372_SFI_216.indd 311 07.08.2016 11:46:52

312


2 - HULLSteel Structural work and surface treatment (plate, welder, paint)

20 - HULL MATERIALS, GENERAL HULL WORKAlarm equipment Basic design & project development services Control & automation systems Engineering services Monitoring equipment Positioning & navigation equipment Project management, construction management

201 - HULL MATERIALSAluminium Sections, foundations, pillars, structural units and bulkheads

202 - TRANSPORTATION, SORTING AND STORAGE OF HULL MATERIALSMachinery and piping work Propellers & impellers

203 - BLASTING, SHOP-PRIMING, ROLLING AND CLEANING OF MATERIALSCleaning equipment Other construction assistance (cleaning, rigging, stores, support) Structural work and surface treatment (plate, welder, paint)

204 - TESTING OF TANKS, BULKHEADS

205 - X-RAY AND ULTRASONIC TESTING OF HULL PARTS

206 - TEMPLATE AND MOULD LOFT WORK

207 - JOINING OF HULL PARTS AFLOAT

21 - AFTERBODY

211 - HULL SECTIONS AND PANELS, AFTERBODY

22 - ENGINE AREA221 - HULL SECTIONS AND PANELS, ENGINE AREA

305-372_SFI_216.indd 312 07.08.2016 11:46:52

313


23 - CARGO AREA - HULL SMALL VESSELSTanks

231 - HULL SECTIONS AND PANELS, CARGO AREA

24 - FOREBODY

241 - HULL SECTIONS AND PANELS, FOREBODY

25 - DECK HOUSES AND SUPERSTRUCTURESAluminium

251 - DECK HOUSES

252 - MAST, PUMP, FAN AND WINCH HOUSES, COMPANION WAYS

253 - SUPERSTRUCTURES

26 - HULL OUTFITTING

261 - HULL AND HOUSE MARKINGS

262 - BOTTOM PLUGS, SEA CHESTS, BILGE WELLS, WATER JET INTAKE

263 - FOUNDATIONS

264 - FENDER AND WEAR BARS, ICE FINS, BILGE KEELS, AIR CUSHION ARR.

265 - GUIDE, TRIM AND COVER PLATES

266 - HAWSE PIPESCapstans, bollards & hawse holes

267 - GUTTER BARS, BULWARK, BREAKWATERS, GAS BARRIERS

268 - FUNNELS

27 - MATERIAL PROTECTION, EXTERNALAdditives & agents

305-372_SFI_216.indd 313 07.08.2016 11:46:52

314


Anti-corrosion Coatings & paint Lubricants Other materials Structural work and surface treatment (plate, welder, paint)

271 - MATERIAL PROTECTION OF BOTTOM, BOOT TOP, RUDDER, RUDDER TRUNK

272 - EXTERNAL MATERIAL PROTECTION OF TOP SIDE

273 - EXTERNAL MATERIAL PROTECTIONDECKS

274 - EQUIPMENT ON EXTERNAL DECKS, BULWARK (INBOARD SIDE)Capstans, bollards & hawse holes Chains, wires & ropes Cranes, crane equipment, lifting devices & booms Winches, drums & reels

275 - SUPERSTRUCTURES, DECK HOUSES, MAST HOUSES

276 - GALVANIZING, NICKEL PLATING, METALLIZINGAdditives & agents Anti-corrosion Coatings & paint Lubricants Other materials Subsea & seismic equipment

278 - EXTERNAL CATHODIC PROTECTIONAnti-corrosion

28 - MATERIAL PROTECTION, INTERNALAdditives & agents Anti-corrosion Coatings & paint Lubricants Other materials Structural work and surface treatment (plate, welder, paint)

281 - MATERIAL PROTECTION OF ACCOMMODATION, DECK HOUSES, STORE ROOMS

282 - MATERIAL PROTECTION OF ENGINE, BOILER AND PUMP ROOMS, STEERING GEAR COMPARTMENTSWorkshop equipment

283 - MATERIAL PROTECTION OF CARGO HOLDS

305-372_SFI_216.indd 314 07.08.2016 11:46:52

315


284 - MATERIAL PROTECTION OF CARGO TANKS

285 - MATERIAL PROTECTION OF BALLAST, SEA W. AND STABIL. TANKS, COFFERDAMS, CHAIN LOCKERSSteering equipment & stabilizers Tanks

286 - MATERIAL PROTECTION OF FRESH WATER TANKS, MISC. TANKS

287 - MATERIAL PROTECTION OF FUEL OIL AND LUBE OIL TANKS

288 - INTERNAL CATHODIC PROTECTIONAdditives & agents Anti-corrosion Coatings & paint Lubricants Other materials

29 - MISCELLANEOUS HULL WORK (NOT STANDARD)

291 - MARKING

292 - FLAME CUTTING

293 - CUTTING, SHEARING

294 - BENDING, FLANGING, ROLLING

295 - BURNING, CHISELLING AND GRINDING FOR BACKWELDS

298 - FITTING AND JOINING OF COMPOSITE MATERIALS

305-372_SFI_216.indd 315 07.08.2016 11:46:52

316


3 - EQUIPMENT FOR CARGOAdditives & agents Air & gas valves Bearings Brackets, bolts, fasteners and locking devices Brakes, couplings & shafts Cargo handling equipment Computer hardware Cranes, crane equipment, lifting devices & booms Fluid valves & other armatures GRP/FRP Hoses, drums, packings & fittings Hydraulic plants & equipment Lubricants Machinery and piping work Meters & indicators Pipes & pipe units Pumps & pump units Sensors, gauges & detectors Subsea & seismic equipment

30 - HATCHES, PORTSHatches, covers, ports, ramps & platforms Hydraulic plants & equipment Monitoring equipment Other air/gas/pneumatic equipment Sections, foundations, pillars, structural units and bulkheads

301 - CARGO HATCH COVERS W/EQUIPMENT ON WEATHER DECKS

302 - CARGO HATCH COVERS W/EQUIPMENT, ON TWEEN DECKS

303 - CARGO TANK HATCHESHatches, covers, ports, ramps & platforms

304 - SMALLER HATCHES, GRAIN HATCHES, MANHOLE COVERSHatches, covers, ports, ramps & platforms Watertight/weathertight doors & windows

305 - BOW PORTS

306 - STERN PORTS

307 - SIDE PORTSCargo handling equipment Cranes, crane equipment, lifting devices & booms

305-372_SFI_216.indd 316 07.08.2016 11:46:52

317


308 - CARGO DOORS IN BULKHEADS

309 - COMMON HYDRAULIC OIL SYSTEM FOR HATCHES/PORTSAggregates Air & gas valves Air filters & spark arresters Fluid filters Fluid valves & other armatures Hydraulic motors & actuators Hydraulic plants & equipment Maintenance, spare parts and supplies Pumps & pump units Regulators & switches

31 - EQUIPMENT FOR CARGO IN HOLDS/ON DECK

311 - LOOSE DECKS AND PLATFORMS FOR CARGO, RAMPSHatches, covers, ports, ramps & platforms

312 - LOOSE TANKS FOR CARGO

313 - LOOSE BULKHEADS FOR CARGO, GRAIN FEEDERS

314 - HOLD BATTENS AND GRATING

315 - DECK/HOLD CARGO PILLARS, BINS, SHELVES, CASESBins, baskets, boxes and containers Brackets, bolts, fasteners and locking devices Cargo handling equipment Chains, wires & ropes

316 - PROTECTION PLATES, COVERS, HATCH TENTS AND TARPAULINSAC units, air dryers, air cooling and heating components Scaffolds, jigs & tarpaulins etc.

317 - CONTAINERS, PALLETSBins, baskets, boxes and containers Brackets, bolts, fasteners and locking devices Fishing and hunting equipment

305-372_SFI_216.indd 317 07.08.2016 11:46:52

318


32 - SPECIAL CARGO HANDLING EQUIPMENTBlocks & shackles Brakes, couplings & shafts Cargo handling equipment Cranes, crane equipment, lifting devices & booms Winches, drums & reels

321 - CARGO LIFTSCranes, crane equipment, lifting devices & booms Furniture & cabinets

322 - ROLLER WAYS, ROLLER CONVEYORS, TURNTABLESBins, baskets, boxes and containers Fishing and hunting equipment

323 - TRAVELLING CRANES IN CARGO HOLDS

324 - BULLDOZERS, MECHANICAL SHOVELS, TROLLEYS, TRUCKSBrakes, couplings & shafts

325 - SELF LOADERS, SCREW TRANSPORTERS, CONVEYOR BELTSCargo handling equipment

326 - PNEUMATIC PLANTS FOR BULK CARGO HANDLING

327 - GRABBING/LIFTING EQUIP. FOR CRANES, MASTS AND BOOMS FOR CARGOBins, baskets, boxes and containers Cargo handling equipment Chains, wires & ropes Cranes, crane equipment, lifting devices & booms Winches, drums & reels

33 - DECK CRANES FOR CARGOCapstans, bollards & hawse holes Chains, wires & ropes Converters (voltage, frequency), receivers, el. dampers and rectifiers Cranes, crane equipment, lifting devices & booms Gears Other construction assistance (cleaning, rigging, stores, support) Winches, drums & reels

331 - ROTATING CRANES W/CRANE PILLARS

332 - ROTATING TRAVELLING CRANES W/RAILS

305-372_SFI_216.indd 318 07.08.2016 11:46:52

319


333 - TRAVELLING TRAVERSE CRANES W/RAILS

334 - OTHER CRANES W/EQUIPMENT FOR CARGO

34 - MASTS, DERRICK POSTS, RIGGING, WINCHES FOR CARGOConverters (voltage, frequency), receivers, el. dampers and rectifiers Drilling equipment Winches, drums & reels

341 - MASTS, DERRICK POSTS

342 - DERRICK BOOMS, BOOM RESTS

343 - STANDING RIGGING

344 - RUNNING RIGGINGBlocks & shackles Brackets, bolts, fasteners and locking devices Drilling equipment Hoses, drums, packings & fittings Other electrical/electro equipment

345 - HOISTING WINCHES

346 - MANOEUVRING WINCHES FOR DERRICK BOOMSCranes, crane equipment, lifting devices & booms

347 - COMMON PLANTS FOR CARGO WINCHES

35 - LOADING/DISCHARGING SYSTEMS FOR LIQUID CARGOAir & gas valves Anti-pollution equipment Control & automation systems Drilling equipment Fluid valves & other armatures Meters & indicators Monitoring equipment Other air/gas/pneumatic equipment Sensors, gauges & detectors

351 - LOADING/DISCHARGING PUMPSMeters & indicators Turbines & waterjet units

305-372_SFI_216.indd 319 07.08.2016 11:46:52

320


352 - LOADING/DISCHARGING SYSTEMS ON DECKOther engine & propulsion equipment

353 - LOADING/DISCHARGING SYSTEMS IN PUMP ROOMSPumps & pump units Subsea & seismic equipment

354 - LOADING/DISCHARGING SYSTEMS IN CARGO TANKSAir & gas valves Fluid valves & other armatures Pumps & pump units Subsea & seismic equipment

355 - LOADING/DISCHARGING SYSTEMS FOR LPG/LNG IN GASEOUS PHASEAir and gas treatment (dehydrators, air separators) Cooling components for fluids Evaporators, condensers and receivers Purification plants & fluid treatment

356 - SEPARATE STRIPPING SYSTEMSEjectors Maintenance, spare parts and supplies Pumps & pump units

357 - MUD SYSTEMS W/PUMPS, PIPING

36 - FREEZING, REFRIGERATING, HEATING SYSTEMS FOR CARGOHeat exchangers & steam generation Pumps & pump units

361 - INSULATION AND SHEATHING OF CARGO HOLDS/TANKS

362 - FREEZING AND REFRIGERATING SYSTEMS FOR DRY CARGOAC units, air dryers, air cooling and heating components Bins, baskets, boxes and containers Compressors Cooling components for fluids Galley, pantry equipment and whiteware

363 - DIRECT COOLING SYSTEMS FOR LIQUID CARGO

364 - CASCADE COOLING SYSTEMS FOR LIQUID CARGOCompressors

365 - INDIRECT COOLING/HEATING SYSTEMS, CARGO OIL HEATING

305-372_SFI_216.indd 320 07.08.2016 11:46:52

321


37 - GAS/VENTILATION SYSTEMS FOR CARGO HOLDS/TANKSAC units, air dryers, air cooling and heating components Air & gas valves Air and gas treatment (dehydrators, air separators) Air filters & spark arresters Evaporators, condensers and receivers Fans Fluid valves & other armatures

371 - VENTILATION SYSTEMS FOR REFRIGERATED CARGO HOLDS

372 - CLOSED VENTILATION/RETURN VAPOUR SYSTEMS FOR CARGO HOLDS

373 - OPEN VENTILATION SYSTEMS FOR CARGO HOLDS

374 - VENT./GAS FREEING SYSTEMS FOR TANKS, WIND SAILS W/EQUIPMENTCargo handling equipment Fans Fire protection & detection equipment Hatches, covers, ports, ramps & platforms Inert gas components, CO2

375 - BLOW-OFF SYST. FROM SAFETY VALVES (PRESSURE/VACUUM VALVES)Air & gas valves Control & automation systems Drilling equipment Fluid valves & other armatures Inspection and testing (NDT, pressure, performance, trial trip, etc)

376 - INERT GAS SYSTEMS W/CONDITIONING PLANTCargo handling equipment Fire protection & detection equipment Firefighting equipment Generators, alternators & dynamos Inert gas components, CO2 Other air/gas/pneumatic equipment

38 - AUXILIARY SYSTEMS, EQUIPMENT FOR CARGOMonitoring equipment

381 - SOUNDING, SURVEIL. AND OPERATING EQUIPMENT FOR CARGO SYSTEMSAggregates

305-372_SFI_216.indd 321 07.08.2016 11:46:52

322


Alarm equipment Basic design & project development services Capstans, bollards & hawse holes Centrals, consoles & panels Combustion engine Computer hardware Construction/fabrication software Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Engineering software (CAD, analysis) Fire protection & detection equipment Gears Generators, alternators & dynamos Hydraulic motors & actuators Meters & indicators Monitoring equipment Onboard software Other air/gas/pneumatic equipment Other communication equipment Other engine & propulsion equipment Pneumatic actuators Positioning & navigation equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays Winches, drums & reels

382 - TANK CLEANING SYSTEMS AND EQUIPMENTAnti-pollution equipment Cranes, crane equipment, lifting devices & booms Detection & identification equipment GRP/FRP Purification plants & fluid treatment Separators & traps Signal cables & connectors

305-372_SFI_216.indd 322 07.08.2016 11:46:52

323


383 - LIFTING GEAR FOR CARGO HOSES

384 - SEPARATE COOLING WATER SYSTEMS FOR CARGO EQUIPMENT

385 - INSULATION DRYING SYSTEM FOR CARGO HOLDS/TANKS

386 - EQUIPM. F. ADDITION OF PRESERVATIVES, INHIBITORS, SPIRITS

387 - SPECIAL STRUCTURES FOR LOADING/DISCHARGING OVER STERN/STEM

305-372_SFI_216.indd 323 07.08.2016 11:46:52

324


4 - SHIP EQUIPMENTBridge inventory & equipment Lubricants Other nautical equipment Winches, drums & reels

40 - MANOEUVRING MACHINERY, EQUIPMENTAdditives & agents Aggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos GRP/FRP Machinery and piping work Meters & indicators Monitoring equipment Pipes & pipe units Positioning & navigation equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Steering equipment & stabilizers Switchboards & relays

401 - RUDDER W/WELDED PARTSAir nozzles, jealousies and batteries Cleaning equipment Fluid nozzles & mixing batteries Gears Steering equipment & stabilizers Structural work and surface treatment (plate, welder, paint)

402 - RUDDER CARRIERS, RUDDER STOCKS, RUDDER BEARINGSBearings

403 - STEERING GEAR/COLUMNS, TELEMOTOR SYS., RUDDER IND., EMERG.STBrakes, couplings & shafts

305-372_SFI_216.indd 324 07.08.2016 11:46:52

325


Coatings & paint Control & automation systems Meters & indicators Personal equipment Steering equipment & stabilizers

404 - SIDE THRUSTERSAir nozzles, jealousies and batteries Cleaning equipment Fluid filters Fluid nozzles & mixing batteries Propellers & impellers Structural work and surface treatment (plate, welder, paint) Thrusters and pods

405 - STABILIZERSSteering equipment & stabilizers

406 - BRAKESBrakes, couplings & shafts Coatings & paint

407 - BUBBLE PLANTS

408 - DYNAMIC POSITIONING SYSTEMSDetection & identification equipment Positioning & navigation equipment Purification plants & fluid treatment Winches, drums & reels

41 - NAVIGATION, SEARCHING EQUIPMENTAlarm equipment Basic design & project development services Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Engineering services Meters & indicators Monitoring equipment Other electrical/electro equipment Positioning & navigation equipment Project management, construction management Radio & telephone communication

411 - RADAR PLANTSAntennas & transmitters Davits and masts

305-372_SFI_216.indd 325 07.08.2016 11:46:52

326


Detection & identification equipment Positioning & navigation equipment

412 - DECCA, LORAN, OMEGA, RADIO DIRECTION FINDERAntennas & transmitters Bearings Davits and masts Detection & identification equipment Positioning & navigation equipment Radio & telephone communication Safety equipment

413 - GYRO PLANTS, AUTOPILOTS, COMPASSESPositioning & navigation equipment

414 - UNDERWATER SEARCHING EQUIPM.: ASDIC, ECHO SOUNDER, SPEED LOGDetection & identification equipment Monitoring equipment Repairs, modifications & docking Subsea & seismic equipment

415 - CLINOMETERS, TRIM INDICATORS, LOAD INDICATORSControl & automation systems Meters & indicators Onboard software

416 - NAVIGATION TVMonitoring equipment Other communication equipment

417 - CLOCKS, FACSIMILE RECORDERS, MISC. NAUTICAL EQUIPMENTBridge inventory & equipment Computer hardware Detection & identification equipment Documentation & data management Meters & indicators Monitoring equipment Other nautical equipment Positioning & navigation equipment Safety equipment

418 - RADAR, SIGNAL, OBSERVATION AND ANTENNA MASTS

419 - INTEGRATED NAVIGATION SYSTEMSBridge inventory & equipment Detection & identification equipment

305-372_SFI_216.indd 326 07.08.2016 11:46:52

327


42 - COMMUNICATION EQUIPMENTAccumulators, condensers, chargers & batteries Alarm equipment Basic design & project development services Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Detection & identification equipment Electrical and electro work Engineering services Monitoring equipment Onboard software Other communication equipment Other electrical/electro equipment Positioning & navigation equipment Project management, construction management Radio & telephone communication

421 - RADIO PLANT, GMDSSAntennas & transmitters Chains, wires & ropes Detection & identification equipment Firefighting equipment Radio & telephone communication Safety equipment Workshop equipment

422 - LIFEBOAT RADIO TRANSMITTERS, EPIRBSAntennas & transmitters Lifesaving equipment Radio & telephone communication Safety equipment

423 - DATA TRANSMISSION PLANTS, COMMUNICATIONAntennas & transmitters Electrical and electro work Monitoring equipment Other communication equipment Power cables Radio & telephone communication Safety equipment Signal cables & connectors Workshop equipment

305-372_SFI_216.indd 327 07.08.2016 11:46:52

328


424 - VHF/UHF TELEPHONESAntennas & transmitters Centrals, consoles & panels Radio & telephone communication Workshop equipment

425 - CALLING/COMMAND/CREW CALL TELEPHONE PLANTS, WALKIE-TALKIESAlarm equipment Detection & identification equipment Fire protection & detection equipment Other communication equipment Radio & telephone communication

426 - SPEAKING TUBES, TUBE POST PLANTSDetection & identification equipment

427 - LIGHT AND SIGNAL EQUIPMENT, LANTERNS, TYPHONSCentrals, consoles & panels Detection & identification equipment Lighting equipment & armatures Other nautical equipment

43 - ANCHORING, MOORING, TOWING EQUIPMENTAir filters & spark arresters Anchor, pipe & cable handling equipment Anchors Brakes, couplings & shafts Bridge inventory & equipment Capstans, bollards & hawse holes Chains, wires & ropes Control & automation systems Cranes, crane equipment, lifting devices & booms Fluid filters Hydraulic motors & actuators Lubricants Monitoring equipment Other communication equipment Winches, drums & reels

431 - ANCHORS W/CHAINS AND EQUIPMENTAnchors Brackets, bolts, fasteners and locking devices Chains, wires & ropes

305-372_SFI_216.indd 328 07.08.2016 11:46:52

329


432 - WINDLASSES W/CHAIN STOPPERS, ROLLERSAnchor, pipe & cable handling equipment Brakes, couplings & shafts Capstans, bollards & hawse holes Chains, wires & ropes Coatings & paint Fishing and hunting equipment Winches, drums & reels

433 - COMB. WINDLASS/MOORING WINCHES W/CHAIN STOPPERS, ROLLERSAC units, air dryers, air cooling and heating components Anchor, pipe & cable handling equipment Capstans, bollards & hawse holes Chains, wires & ropes Fishing and hunting equipment Winches, drums & reels

434 - CAPSTANS, WARPING AND MOORING WINCHESWinches, drums & reels

435 - FIXED MOORING EQUIPMENTCapstans, bollards & hawse holes

436 - LOOSE MOORING EQUIPMENTBlocks & shackles Chains, wires & ropes Fenders & buoys Other electrical/electro equipment

437 - TOWING EQUIPMENTBlocks & shackles Chains, wires & ropes Winches, drums & reels

438 - COMMON HYDRAULIC OIL SYSTEM FOR ANCHORING/MOORING EQUIPMENTAggregates Fluid filters Hydraulic motors & actuators Hydraulic plants & equipment Pumps & pump units Regulators & switches Subsea & seismic equipment

439 - COMMON HYDR. OIL SYST. FOR ANCHORING/MOORING/CARGO WINCHESAggregates Hydraulic motors & actuators Hydraulic plants & equipment Pumps & pump units Regulators & switches

305-372_SFI_216.indd 329 07.08.2016 11:46:52

330


44 - REP./MAINT./CLEAN. EQUIP. WORKSHOP/STORE OUTFIT, NAME PLATESInspection and testing (NDT, pressure, performance, trial trip, etc) Workshop equipment

441 - MACHINE TOOLS, CUTTING AND WELDING EQUIPMENTOther air/gas/pneumatic equipment Welding & cutting equipment Workshop equipment

442 - TOOLS/EQUIP. FOR ENGINEERS, ELECTR., BOATSWAINS, CARPENTERSAir & gas valves Air filters & spark arresters Bearings Brackets, bolts, fasteners and locking devices Cleaning equipment Coatings & paint Connectors, sockets, plugs & distribution boxes Fluid filters Fluid valves & other armatures Gears Inspection and testing (NDT, pressure, performance, trial trip, etc) Inspections & testing equipment Lighting equipment & armatures Meters & indicators Other electrical/electro equipment Other fluid transfer/treatment equipment Personal equipment Regulators & switches Sanitary & waste equipment Sensors, gauges & detectors Structural work and surface treatment (plate, welder, paint) Workshop equipment

443 - PAINTING EQUIPMENT, SCAFFOLDING, PAINT RAFTS/BOATS (GIGS)Additives & agents Anti-corrosion Coatings & paint Inspection and testing (NDT, pressure, performance, trial trip, etc) Lifeboats/rafts & other boats Lubricants Maintenance, spare parts and supplies Other materials Repairs, modifications & docking Scaffolds, jigs & tarpaulins etc. Workshop equipment

305-372_SFI_216.indd 330 07.08.2016 11:46:52

331


444 - CLEANING EQUIPMENT, GARBAGE CHUTESAdditives & agents Chemicals Cleaning equipment Computer hardware Fluid filters Other communication equipment Other fluid transfer/treatment equipment Purification plants & fluid treatment Sanitary & waste equipment Workshop equipment

445 - GARBAGE DISPOSAL PLANTS, INCINERATORSAir and gas treatment (dehydrators, air separators) Boilers, burners and incinerators Maintenance, spare parts and supplies Purification plants & fluid treatment Sanitary & waste equipment Structural work and surface treatment (plate, welder, paint)

446 - OUTFITTING IN STORE ROOMS AND WORKSHOPSFurniture & cabinets Other inventory Workshop equipment

447 - CLAMPS/FOUNDATIONS FOR SPARE PARTSConnectors, sockets, plugs & distribution boxes

448 - NAME PLATES/MARKING ON MACHINERY, EQUIPM., PIPES, CABLESLighting equipment & armatures Other inventory Safety equipment

45 - LIFTING, TRANSPORT EQUIPMENT FOR MACHINERY COMPONENTSCranes, crane equipment, lifting devices & booms Other construction assistance (cleaning, rigging, stores, support)

451 - ENGINE ROOM LIFTS

452 - TRAVELLING CRANES AND LIFTING GEAR IN ENGINE ROOM

453 - EXTERNAL LIFTING GEAR FOR MACHINERY COMPONENTS

305-372_SFI_216.indd 331 07.08.2016 11:46:52

332


46 - HUNTING, FISHING EQUIPMENTSensors, gauges & detectors

461 - HUNTING EQUIPMENT FOR WHALE, SEALDetection & identification equipment Fishing and hunting equipment

462 - LONGLINES W/EQUIPMENT, NETS, HANDFISHING EQUIPMENT

463 - PURSE NETS AND SEINE EQUIPMENT, POWER BLOCKSCranes, crane equipment, lifting devices & booms Fishing and hunting equipment

464 - TRAWLING EQUIPMENTCapstans, bollards & hawse holes Control & automation systems Fishing and hunting equipment Winches, drums & reels

465 - FISH PUMPING PLANTS AND LANDING EQUIPMENTFishing and hunting equipment Pumps & pump units

466 - SPECIAL FISHING EQUIPMENT

47 - ARMAMENT, WEAPON, WEAPON COUNTERMEASURES

471 - HAND WEAPONS, LIGHT AND HEAVY GUNS

472 - ROCKET PLANTS

473 - TORPEDO PLANTS

474 - ANTI-SUBMARINE WEAPONS

475 - MINELAYING EQUIPMENT

476 - MINESWEEPING EQUIPMENT

477 - DE-GAUSSING PLANTS

478 - TORPEDO COUNTERMEASURES, SMOKE GENERATING EQUIPMENT

479 - WEAPON CONTROL SYSTEMS

305-372_SFI_216.indd 332 07.08.2016 11:46:52

333


48 - SPECIAL EQUIPMENTBins, baskets, boxes and containers Lifesaving equipment

481 - DRILLING EQUIPMENTBins, baskets, boxes and containers Boilers, burners and incinerators Capstans, bollards & hawse holes Cargo handling equipment Chains, wires & ropes Cranes, crane equipment, lifting devices & booms Drilling equipment Inspections & testing equipment Other fluid transfer/treatment equipment Pumps & pump units Subsea & seismic equipment Winches, drums & reels Workshop equipment

482 - DREDGING EQUIPMENT

483 - DIVING EQUIPMENTDetection & identification equipment

484 - LABORATORY EQUIPMENT

485 - AIRCRAFT, HELICOPTERS

486 - AUXILIARY VESSELS

487 - DE-ICING EQUIPMENT

488 - SEISMIC EQUIPMENT

489 - ENVIRONMENTAL PROTECTION EQUIPMENT

305-372_SFI_216.indd 333 07.08.2016 11:46:52

334


49 - FISH PROCESSING EQUIPMENT

491 - RAW MATERIAL HANDLING

492 - FILLET FACTORIES

493 - SHRIMP FACTORIES

494 - MEAL AND OIL FACTORIES

495 - SURIMI FACTORIES

496 - SHELL FACTORIES

305-372_SFI_216.indd 334 07.08.2016 11:46:53

335


5 - EQUIPMENT FOR CREW AND PASSENGERSAdditives & agents Furniture & cabinets

50 - LIFESAVING, PROTECTION, MEDICAL EQUIPMENTLifesaving equipment Personal equipment

501 - LIFEBOATS W/EQUIPMENTDavits and masts Lifeboats/rafts & other boats Lifesaving equipment Purification plants & fluid treatment

502 - LIFERAFTS W/EQUIPMENTDavits and masts Lifeboats/rafts & other boats Lifesaving equipment

503 - LIFESAVING, SAFETY AND EMERGENCY EQUIPMENTAnti-pollution equipment Bins, baskets, boxes and containers Brackets, bolts, fasteners and locking devices Connectors, sockets, plugs & distribution boxes Cranes, crane equipment, lifting devices & booms Fenders & buoys Ladders, railings, stairs, ramps & gangways Lifeboats/rafts & other boats Lifesaving equipment Lighting equipment & armatures Meters & indicators Personal equipment Safety equipment

504 - MEDICAL, FIRST AID AND DENTAL EQUIPMENT, MEDICINESCranes, crane equipment, lifting devices & booms Other air/gas/pneumatic equipment505 - LOOSE FIREFIGHTING APPARATUSES AND EQUIP., FIREMEN’S OUTFITAluminium Bins, baskets, boxes and containers Compressors

305-372_SFI_216.indd 335 07.08.2016 11:46:53

336


Fire protection & detection equipment Firefighting equipment Gratings & drains Lifesaving equipment Other materials Personal equipment Safety equipment Stainless steel Steel Workshop equipment

506 - ABC PROTECTION EQUIPMENT

507 - STAND-BY/RESCUE EQUIPMENT

51 - INSULATION, PANELS, BULKHEADS, DOORS, SIDESCUTTLES,SKYLIGHTSAccommodation modules Ducts, channels, trays and pipe support Fire protection & detection equipment Furniture & cabinets Hatches, covers, ports, ramps & platforms Interior doors & windows Pipes & pipe units Vibration absorbers & dampeners Watertight/weathertight doors & windows

511 - INSULATION, PARTITION BULKHEADS, PANELLING, WALLPAPERFire protection & detection equipment Interior floor, wall & ceiling covers

512 - DOORS W/COAMINGS IN ACCOMMODATIONAccommodation modules Interior doors & windows Watertight/weathertight doors & windows

513 - OTHER INTERNAL DOORS W/COAMINGSAccommodation modules Air & gas valves Fluid valves & other armatures Interior doors & windows Pumps & pump units Watertight/weathertight doors & windows

514 - EXTERNAL DOORS W/COAMINGSAccommodation modules

305-372_SFI_216.indd 336 07.08.2016 11:46:53

337


Interior doors & windows Watertight/weathertight doors & windows

515 - SIDE SCUTTLES AND WINDOWS W/EQUIPMENTBridge inventory & equipment Fire protection & detection equipment Interior doors & windows Watertight/weathertight doors & windows

516 - SKYLIGHTS W/EQUIPMENT

52 - INTERNAL DECK COVERING, LADDERS, STEPS, RAILINGAdditives & agents Aluminium Anti-corrosion Coatings & paint Engineering services Gratings & drains GRP/FRP Hatches, covers, ports, ramps & platforms Ladders, railings, stairs, ramps & gangways Lubricants Other materials Stainless steel Steel Structural work and surface treatment (plate, welder, paint) Watertight/weathertight doors & windows

521 - INTERNAL DECK BASE COVERING

522 - INTERNAL DECK TOP COVERING (LINOLEUM, TILES, PARQUET ETC.)Coatings & paint

523 - INTERNAL GRATING AND WOOD DECKS

524 - LOOSE FLOOR PLATES, PLATFORMS, STEPS AND LADDERS IN ACCOMMOD.Interior floor, wall & ceiling covers Sections, foundations, pillars, structural units and bulkheads

525 - LOOSE FLOOR PLATES, PLATFORMS AND LADDERS IN ENG. AND PUMP ROOMS

526 - LADDERS, PLATFORMS AND RAILING IN BALLAST AND FUEL TANKS

527 - PLATFORMS, LADDERS AND RAILING IN CARGO TANKS

305-372_SFI_216.indd 337 07.08.2016 11:46:53

338


528 - PLATFORMS, LADDERS AND RAILING IN CARGO HOLDS

53 - EXT. DECK COVERING, LADDERS, STEPS, FORE, AFT GANGWAYAdditives & agents Aluminium Anti-corrosion Coatings & paint Gratings & drains GRP/FRP Hatches, covers, ports, ramps & platforms Lubricants Monitoring equipment Other communication equipment Other materials Stainless steel Steel Structural work and surface treatment (plate, welder, paint) Watertight/weathertight doors & windows

531 - EXTERNAL DECK COVERING

532 - EXTERNAL WOOD DECKS

533 - HANDRAILS, RAILING, RAIL GATESAluminium Ladders, railings, stairs, ramps & gangways

534 - EXTERNAL PLATFORMS, STEPS, LADDERS AND GRATING W/EQUIPMENT

535 - FORE AND AFT GANGWAYS W/EQUIPMENT

536 - AWNINGS W/EQUIPMENT

537 - DECK TABLES AND CHAIRS, SWIMMING POOLS

54 - FURNITURE, INVENTORY, ENTERTAINMENT EQUIPMENTEngineering services Other inventory

541 - FURNITURE FOR CREW, STANDARD FURNITUREBridge inventory & equipment Connectors, sockets, plugs & distribution boxes

305-372_SFI_216.indd 338 07.08.2016 11:46:53

339


Furniture & cabinets Galley, pantry equipment and whiteware Other inventory Workshop equipment

542 - OFFICE EQUIP. AND SPEC. FURNITURE IN WHEELH., CHART AND RADIOR.Administration, broking, finance & insurance services Alarm equipment Bridge inventory & equipment Computer hardware Connectors, sockets, plugs & distribution boxes Construction/fabrication software Documentation & data management Engineering software (CAD, analysis) Furniture & cabinets Onboard software Positioning & navigation equipment Project management, construction management Workshop equipment

543 - BEDCLOTH, MATTRESSESFurniture & cabinets Generators, alternators & dynamos Other inventory

544 - CURTAINS, CARPETS

545 - DECORATIONS, FIGUREHEADS

546 - HOBBY, SPORTS AND ENTERTAINMENT EQUIPMENTAntennas & transmitters

547 - INVENTORY, SMALLER ITEMS

548 - FURNITURE FOR PASSENGERSBridge inventory & equipment Furniture & cabinets Other inventory

55 - GALLEY/PANTRY EQUIP., PROVISION PLANTS, LAUNDRY/IRONING EQU.Accommodation modules

551 - GALLEY MACHINERYCleaning equipment Galley, pantry equipment and whiteware Sanitary & waste equipment

305-372_SFI_216.indd 339 07.08.2016 11:46:53

340


552 - GALLEY/PANTRY EQUIPMENT FOR PREPARATION AND SERVINGFurniture & cabinets Galley, pantry equipment and whiteware

553 - CAFETERIA PLANT W/EQUIPMENTFurniture & cabinets Galley, pantry equipment and whiteware

554 - FREEZING/REFRIGERATING SYSTEMS FOR PROVISIONSAC units, air dryers, air cooling and heating components Compressors Cooling components for fluids Galley, pantry equipment and whiteware Meters & indicators Sensors, gauges & detectors

555 - INSULATION, LINING AND BATTENING IN PROV. ROOMS, DOORS AND PORTS

556 - WALLS, BINS, SHELVES, RACKS, GRATING AND INVENT. IN PROV.ROOMSFurniture & cabinets Stainless steel

557 - INSULATION DRYING SYSTEMS FOR PROVISION ROOMS

558 - LAUNDRY, IRONING AND DRYING EQUIPMENTAir and gas treatment (dehydrators, air separators) Cleaning equipment Furniture & cabinets Galley, pantry equipment and whiteware

56 - TRANSPORT EQUIPMENT FOR CREW, PASSENGERS, PROVISIONS

561 - PERSONNEL LIFTS, ESCALATORSWinches, drums & reels

562 - FOOD AND LINEN LIFTS

563 - PROVISION CRANES AND DERRICKSCranes, crane equipment, lifting devices & booms

305-372_SFI_216.indd 340 07.08.2016 11:46:53

341


564 - SHORE GANGWAYS W/DAVITS, LANDING BOOMSElectrical motors & starters Ladders, railings, stairs, ramps & gangways Other air/gas/pneumatic equipment Safety equipment

565 - MISCELLANEOUS CONVEYANCE EQUIPMENT

566 - HELICOPTER PLATFORMS W/EQUIPMENTHelicopter deck equipment

57 - VENTILATION, AIR-CONDITIONING, HEATING SYSTEMSAC units, air dryers, air cooling and heating components Air & gas valves Air and gas treatment (dehydrators, air separators) Air filters & spark arresters Electrical heating Fans Fire protection & detection equipment Firefighting equipment Fluid filters Fluid valves & other armatures Other air/gas/pneumatic equipment Pumps & pump units Purification plants & fluid treatment Watertight/weathertight doors & windows

571 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR ACCOMMODATION

572 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR PROVISION ROOMS

573 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR CONTROL ROOMS

574 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR BOILER/ENG. ROOMS

575 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR PUMP ROOMSAC units, air dryers, air cooling and heating components Fans

576 - VENTILATION/AIR-COND. SYSTEMS FOR STEERING GEAR COMPARTMENTS

577 - CENTRAL HEATING SYSTEMS W/RADIATORSBoilers, burners and incinerators Heat exchangers & steam generation

305-372_SFI_216.indd 341 07.08.2016 11:46:53

342


58 - SANITARY SYST. W/DISCHARGES, ACCOMMODATION DRAIN SYSTEMSBoilers, burners and incinerators Evaporators, condensers and receivers Fluid valves & other armatures Machinery and piping work Purification plants & fluid treatment Sanitary & waste equipment Sections, foundations, pillars, structural units and bulkheads

581 - SANITARY SUPPLY SYSTEMSBoilers, burners and incinerators Heat exchangers & steam generation Pumps & pump units Purification plants & fluid treatment

582 - SANITARY DISCHARGE SYSTEMS, ACCOMMODATION DRAINAGE SYSTEMSAdditives & agents Anchors Anti-pollution equipment Brackets, bolts, fasteners and locking devices Cleaning equipment Freshwater generation Other fluid transfer/treatment equipment Pumps & pump units Purification plants & fluid treatment Sanitary & waste equipment

583 - BATHTUBS, BIDETS, SHOWER CABINETS, W.C., WASHBASINSAccommodation modules Pumps & pump units Sanitary & waste equipment Sections, foundations, pillars, structural units and bulkheads

584 - DRINKING WATER SYSTEMS AND COOLERSAdditives & agents Cooling components for fluids Fluid filters Freshwater generation Purification plants & fluid treatment

305-372_SFI_216.indd 342 07.08.2016 11:46:53

343


59 - PASSENGER VESSEL CABINS, PUBLIC ROOMSCleaning equipment

591 - PASSENGER CABINS

592 - PUBLIC SPACES

593 - OTHER PASSENGER SPACES

594 - CREW CABINS

595 - OTHER CREW SPACESAccommodation modules

305-372_SFI_216.indd 343 07.08.2016 11:46:53

344


6 - MACHINERY MAIN COMPONENTSAdditives & agents Aggregates Air & gas valves Air filters & spark arresters Alarm equipment Anchor, pipe & cable handling equipment Bearings Brackets, bolts, fasteners and locking devices Brakes, couplings & shafts Bridge inventory & equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Fluid filters Fluid valves & other armatures Gears Generators, alternators & dynamos GRP/FRP Inspection and testing (NDT, pressure, performance, trial trip, etc) Inspections & testing equipment Machinery and piping work Meters & indicators Monitoring equipment Pipes & pipe units Project management, construction management Propellers & impellers Pumps & pump units Regulators & switches Sensors, gauges & detectors Subsea & seismic equipment Switchboards & relays Vibration absorbers & dampeners

60 - DIESEL ENGINES FOR PROPULSIONAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems

305-372_SFI_216.indd 344 07.08.2016 11:46:53

345


Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

601 - DIESEL ENGINESAC units, air dryers, air cooling and heating components Air & gas valves Air filters & spark arresters Anchor, pipe & cable handling equipment Bearings Brakes, couplings & shafts Combustion engine Compressors Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Exhaust components & silencers Fluid filters Fluid valves & other armatures Gears Generators, alternators & dynamos Hatches, covers, ports, ramps & platforms Hoses, drums, packings & fittings Hydraulic motors & actuators Hydraulic plants & equipment Maintenance, spare parts and supplies Other engine & propulsion equipment Pneumatic actuators Propellers & impellers Regulators & switches Tanks Vibration absorbers & dampeners

61 - STEAM MACHINERY FOR PROPULSIONAggregates Alarm equipment Boilers, burners and incinerators

305-372_SFI_216.indd 345 07.08.2016 11:46:53

346


Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays Turbines & waterjet units

611 - STEAM TURBINES W/CONDENSERSEvaporators, condensers and receivers Turbines & waterjet units

612 - HIGH PRESSURE TURBINES

613 - MEDIUM AND LOW PRESSURE TURBINES

614 - MAIN CONDENSERS

618 - STEAM ENGINES W/CONDENSERS

62 - OTHER TYPES OF PROPULSION MACHINERYAggregates Air nozzles, jealousies and batteries Alarm equipment Centrals, consoles & panels Cleaning equipment Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Fluid nozzles & mixing batteries Gears Generators, alternators & dynamos Meters & indicators

305-372_SFI_216.indd 346 07.08.2016 11:46:53

347


Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Structural work and surface treatment (plate, welder, paint) Switchboards & relays

621 - GAS TURBINES W/AIR PREHEATERSTurbines & waterjet units

625 - EL. GENERATOR/EL. MOTOR PLANTS

627 - FAN PLANTS, WATER-JET PUMP PLANTS W/NOZZLESTurbines & waterjet units

628 - SPECIAL PROPULSION AGGREGATES

63 - PROPELLERS, TRANSMISSIONS, FOILSAdditives & agents Anti-corrosion Bearings Brakes, couplings & shafts Chains, wires & ropes Coatings & paint Control & automation systems Gears Lubricants Machinery and piping work Onboard software Other materials Propellers & impellers Thrusters and pods

631 - FIXED PROPELLER PLANTS INCL. NOZZLESPropellers & impellers

634 - CONTROLLABLE PITCH PROPELLER PLANTS INCL. NOZZLESControl & automation systems Machinery and piping work Propellers & impellers

635 - SPEC. PROPELLER PLANTS INCL. NOZZLES (EXCL. SIDE THRUSTERS)Machinery and piping work Propellers & impellers Thrusters and pods

636 - SPARE PROPELLERS

305-372_SFI_216.indd 347 07.08.2016 11:46:53

348


637 - MAIN REDUCTION GEARS W/THRUST BEARINGS AND COUPLINGSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Steering equipment & stabilizers Switchboards & relays

638 - CENTRAL GEARS (JOINT AUXILIARY GEAR, NOT FOR PROPULSION)Aggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

639 - FOILS, SAILS W/MASTS AND RIGGINGOther engine & propulsion equipment

64 - BOILERS, STEAM, GAS GENERATORSBoilers, burners and incinerators Control & automation systems Evaporators, condensers and receivers Fire protection & detection equipment

305-372_SFI_216.indd 348 07.08.2016 11:46:53

349


Galley, pantry equipment and whiteware Heat exchangers & steam generation Inspections & testing equipment Machinery and piping work Pipes & pipe units Pumps & pump units Purification plants & fluid treatment Sensors, gauges & detectors

641 - MAIN BOILERSBoilers, burners and incinerators Exhaust components & silencers Tanks

644 - AUXILIARY BOILERSBoilers, burners and incinerators

646 - EXHAUST GAS BOILERSAir filters & spark arresters Boilers, burners and incinerators Fluid filters

647 - STEAM CONVERTERSHeat exchangers & steam generation

648 - CENTRAL HEATING AND THERMAL OIL BOILERSHeat exchangers & steam generation

649 - GAS GENERATORSHeat exchangers & steam generation

65 - MOTOR AGGREGATES FOR MAIN ELECTRIC POWER PRODUCTIONAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Cranes, crane equipment, lifting devices & booms Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment

305-372_SFI_216.indd 349 07.08.2016 11:46:53

350


Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

651 - MOTOR AGGREGATESAC units, air dryers, air cooling and heating components Aggregates Air & gas valves Air filters & spark arresters Alarm equipment Bearings Brakes, couplings & shafts Centrals, consoles & panels Combustion engine Compressors Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Exhaust components & silencers Fluid filters Fluid valves & other armatures Gears Generators, alternators & dynamos Hatches, covers, ports, ramps & platforms Hoses, drums, packings & fittings Hydraulic motors & actuators Hydraulic plants & equipment Maintenance, spare parts and supplies Meters & indicators Monitoring equipment Other engine & propulsion equipment Pneumatic actuators Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays Tanks Vibration absorbers & dampeners

305-372_SFI_216.indd 350 07.08.2016 11:46:53

351


66 - OTHER AGGR., GEN. FOR MAIN, EMERGENCY EL. POWER PRODUCTIONAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Hydraulic motors & actuators Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

661 - STEAM TURBO AGGREGATES

663 - GAS TURBO AGGREGATES

665 - HARBOUR AND EMERGENCY AGGREGATES W/EQUIPMENTCombustion engine Electrical motors & starters Generators, alternators & dynamos

667 - SHAFT GENERATORS

669 - GENERATORS W/HYDRAULIC DRIVE

67 - NUCLEAR REACTOR PLANTS

305-372_SFI_216.indd 351 07.08.2016 11:46:53

352


7 - SYSTEMS FOR MACHINERY MAIN COMPONENTSAC units, air dryers, air cooling and heating components Air & gas valves Air filters & spark arresters Bearings Brackets, bolts, fasteners and locking devices Brakes, couplings & shafts Bridge inventory & equipment Cargo handling equipment Centrals, consoles & panels Cleaning equipment Connectors, sockets, plugs & distribution boxes Control & automation systems Cooling components for fluids Fluid filters Fluid valves & other armatures Gears Heat exchangers & steam generation Inspections & testing equipment Machinery and piping work Meters & indicators Monitoring equipment Other inventory Other nautical equipment Pumps & pump units Regulators & switches Sensors, gauges & detectors Subsea & seismic equipment

70 - FUEL SYSTEMSAir & gas valves Air filters & spark arresters Centrals, consoles & panels Cooling components for fluids Fluid filters Fluid valves & other armatures Maintenance, spare parts and supplies Meters & indicators Preheaters Purification plants & fluid treatment Regulators & switches Sensors, gauges & detectors

305-372_SFI_216.indd 352 07.08.2016 11:46:53

353


Signal cables & connectors Tanks

701 - FUEL OIL TRANSFER AND DRAIN SYSTEMSMeters & indicators

702 - FUEL OIL PURIFICATION PLANTSAdditives & agents Separators & traps

703 - FUEL OIL SUPPLY SYSTEMSBoilers, burners and incinerators Preheaters Sensors, gauges & detectors

704 - HEATING COILS IN FUEL OIL TANKS

707 - GAS FUEL SYSTEM

708 - SOLID FUEL SYSTEMS (E.G. COAL)

71 - LUBE OIL SYSTEMSAir & gas valves Centrals, consoles & panels Cooling components for fluids Fluid filters Fluid valves & other armatures Lubricants Maintenance, spare parts and supplies Meters & indicators Preheaters Sensors, gauges & detectors Tanks

711 - LUBE OIL TRANSFER AND DRAIN SYSTEMS

712 - LUBE OIL PURIFICATION PLANTSFluid filters Separators & traps

713 - LUBE OIL SYSTEMS FOR PROPULSION MACHINERY AND TRANSMISSIONS

714 - LUBE OIL SYSTEMS FOR MOTOR/TURBO AGGREGATES

715 - L.O. SYST. FOR GAS GEN., COMMON L.O. SYST. FOR OTHER MACH.

305-372_SFI_216.indd 353 07.08.2016 11:46:53

354


72 - COOLING SYSTEMSAir & gas valves Fluid valves & other armatures GRP/FRP Heat exchangers & steam generation Meters & indicators Pipes & pipe units Sensors, gauges & detectors

721 - SEA WATER COOLING SYSTEMSPipes & pipe units Pumps & pump units

722 - FRESH WATER AND OTHER COOLING SYSTEMSCooling components for fluids Pipes & pipe units Purification plants & fluid treatment

73 - COMPRESSED AIR SYSTEMSAC units, air dryers, air cooling and heating components Air & gas valves Air filters & spark arresters Compressors Fluid filters Fluid valves & other armatures Other air/gas/pneumatic equipment Separators & traps Tanks

731 - STARTING AIR SYSTEMS (HIGH PRESSURE)Compressors Tanks

732 - GENERAL PURPOSE AIR SYSTEMS FOR ENGINE ROOM (LOW PRESSURE)Tanks

733 - GENERAL PURPOSE AIR SYSTEMS FOR DECK (LOW PRESSURE)

734 - INSTRUMENT AIR SUPPLY SYSTEMSAC units, air dryers, air cooling and heating components Air and gas treatment (dehydrators, air separators) Other air/gas/pneumatic equipment Tanks

305-372_SFI_216.indd 354 07.08.2016 11:46:53

355


74 - EXHAUST SYSTEMS, AIR INTAKESConverters (voltage, frequency), receivers, el. dampers and rectifiers Exhaust components & silencers Heat exchangers & steam generation

741 - FRESH AIR INTAKES (NOT VENTILATION)

743 - EXHAUST GAS SYSTEMS FOR PROPULSION MACHINERYAir filters & spark arresters Brackets, bolts, fasteners and locking devices Exhaust components & silencers Fluid filters

744 - EXHAUST GAS SYSTEMS FOR MOTOR AGGREGATESAir filters & spark arresters Exhaust components & silencers Fluid filters

745 - EXHAUST GAS SYSTEMS FOR BOILERSAir filters & spark arresters Exhaust components & silencers Fluid filters

748 - ASH/SLAG HANDLING SYSTEMS

75 - STEAM, CONDENSATE, FEED WATER SYSTEMSAir & gas valves Air and gas treatment (dehydrators, air separators) Fluid valves & other armatures Pipes & pipe units Pumps & pump units

751 - PRIMARY FULL PRESSURE STEAM SYSTEMS

752 - PRIMARY REDUCED PRESSURE STEAM SYSTEMS IN ENGINE ROOM

753 - PRIMARY REDUCED PRESSURE SYSTEMS OUTSIDE ENGINE ROOM

754 - PRIM. DRAIN, BLOW-OFF, EXH. STEAM AND DEAERATION SYST. IN E/R

755 - PRIMARY CONDENSATE SYSTEMS

756 - PRIMARY FEED WATER SYSTEMS

305-372_SFI_216.indd 355 07.08.2016 11:46:53

356


757 - SECONDARY STEAM SYSTEMS IN ENGINE ROOM

758 - SECONDARY STEAM SYSTEMS OUTSIDE ENGINE ROOM

759 - SECONDARY CONDENSATE AND FEED WATER SYSTEMS

76 - DISTILLED, MAKE-UP WATER SYSTEMSPumps & pump units

761 - DISTILLED AND MAKE-UP WATER SYSTEMSEvaporators, condensers and receivers Fluid filters Freshwater generation Meters & indicators Pumps & pump units Purification plants & fluid treatment Sensors, gauges & detectors

79 - AUTOMATION SYSTEMS FOR MACHINERYAggregates Air & gas valves Air nozzles, jealousies and batteries Alarm equipment Basic design & project development services Capstans, bollards & hawse holes Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Electrical motors & starters Engineering services Fire protection & detection equipment Fluid valves & other armatures Gears Generators, alternators & dynamos Hatches, covers, ports, ramps & platforms Hydraulic motors & actuators Meters & indicators Monitoring equipment Onboard software Other communication equipment Other electrical/electro equipment

305-372_SFI_216.indd 356 07.08.2016 11:46:53

357


Other engine & propulsion equipment Pneumatic actuators Positioning & navigation equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Signal cables & connectors Switchboards & relays Winches, drums & reels

791 - MANOEUVRE CONSOLES, MAIN CONSOLESAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

792 - COMMON AUTOMATION EQUIPMENT, ENGINE ROOM ALARM SYSTEMSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Computer hardware Construction/fabrication software Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Engineering software (CAD, analysis) Fire protection & detection equipment Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment

305-372_SFI_216.indd 357 07.08.2016 11:46:53

358


Onboard software Other communication equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

793 - AUTOM. EQUIP. FOR PROP. MACH. AND TRANSMIS., ENG. TELEGRAPHAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Inspection and testing (NDT, pressure, performance, trial trip, etc) Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

794 - AUTOMATION EQUIPMENT FOR BOILERSEvaporators, condensers and receivers Freshwater generation Heat exchangers & steam generation Sensors, gauges & detectors

795 - AUTOMATION EQUIPMENT FOR MOTOR/TURBO AGGREGATESAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management

305-372_SFI_216.indd 358 07.08.2016 11:46:53

359


Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

796 - AUTOMATION EQUIPMENT FOR NUCLEAR REACTOR PLANTS

797 - AUTOMATION EQUIPMENT FOR OTHER MACHINERY COMPONENTSAlarm equipment Control & automation systems Fire protection & detection equipment Meters & indicators Monitoring equipment Other materials Sensors, gauges & detectors

798 - CABLES/LEADS AND PIPING FOR AUTOMATION SYSTEMS FOR MACHINERYAnchor, pipe & cable handling equipment

305-372_SFI_216.indd 359 07.08.2016 11:46:53

360


8 - SHIP COMMON SYSTEMSBrakes, couplings & shafts Cargo handling equipment Inspection and testing (NDT, pressure, performance, trial trip, etc) Machinery and piping work Maintenance, spare parts and supplies Other nautical equipment Sensors, gauges & detectors Vibration absorbers & dampeners

80 - BALLAST, BILGE SYSTEMS, GUTTER PIPES OUTSIDE ACCOMMOD.Additives & agents GRP/FRP Meters & indicators Pipes & pipe units

801 - BALLAST SYSTEMS, SOLID BALLASTControl & automation systems Other materials Pumps & pump units Purification plants & fluid treatment Steel

802 - HEATING COILS IN BALLAST TANKSAdditives & agents GRP/FRP Pipes & pipe units Subsea & seismic equipment

803 - BILGE SYSTEMSFluid filters Monitoring equipment Pumps & pump units Purification plants & fluid treatment Sanitary & waste equipment Sensors, gauges & detectors Separators & traps

804 - GUTTER PIPES OUTSIDE ACCOMMODATIONAdditives & agents Fluid valves & other armatures GRP/FRP

305-372_SFI_216.indd 360 07.08.2016 11:46:53

361


Pipes & pipe units Steel Subsea & seismic equipment

81 - FIRE, LIFEBOAT ALARM, FIRE FIGHTING AND WASH DOWN SYSTEMSAccumulators, condensers, chargers & batteries Additives & agents Firefighting equipment GRP/FRP Hoses, drums, packings & fittings Pipes & pipe units Subsea & seismic equipment

811 - FIRE DETECTION, FIRE AND LIFEBOAT ALARM SYSTEMSAlarm equipment Centrals, consoles & panels Control & automation systems Electrical and electro work Fire protection & detection equipment Other communication equipment Sensors, gauges & detectors

812 - EMERGENCY SHUTDOWN SYSTEM

813 - FIRE/WASH DOWN SYST., EMERGENCY FIRE PUMPS, SPRINKLER SYST.Fire protection & detection equipment Firefighting equipment Furniture & cabinets Hoses, drums, packings & fittings Pumps & pump units Subsea & seismic equipment

814 - FIRE FIGHTING SYSTEMS FOR EXTERNAL FIRESPumps & pump units

815 - FIRE FIGHTING SYSTEMS W/GAS (CO2, HALON, ETC)Monitoring equipment Sensors, gauges & detectors

816 - FIRE FIGHTING SYSTEMS W/FOAMFirefighting equipment

817 - FIRE FIGHTING SYSTEMS W/STEAM

818 - FIRE FIGHTING SYSTEMS W/POWDERFirefighting equipment

305-372_SFI_216.indd 361 07.08.2016 11:46:53

362


819 - FIRE FIGHTING SYSTEMS W/OTHER AGENTSFirefighting equipment Inert gas components, CO2 Pumps & pump units

82 - AIR, SOUNDING SYSTEMS FROM TANKS TO DECK

821 - AIR AND SOUNDING SYSTEMS FROM TANKS TO DECKAdditives & agents GRP/FRP Pipes & pipe units Subsea & seismic equipment

83 - SPECIAL COMMON HYDRAULIC OIL SYSTEMSHoses, drums, packings & fittings Hydraulic plants & equipment Pumps & pump units

831 - SPECIAL COMMON HYDRAULIC OIL SYSTEMSAdditives & agents GRP/FRP Pipes & pipe units Subsea & seismic equipment

84 - CENTRAL HEAT TRANSFER SYSTEMS W/CHEMICAL FLUIDS/OILFluid valves & other armatures

841 - HEATING OIL TREATMENT SYSTEMSBoilers, burners and incinerators Galley, pantry equipment and whiteware

842 - HEATING OIL DISTRIBUTION SYSTEMS FOR ENGINE ROOM

843 - HEATING OIL DISTRIBUTION SYSTEMS OUTSIDE ENGINE ROOM

305-372_SFI_216.indd 362 07.08.2016 11:46:53

363


85 - COMMON ELECTRIC, ELECTRONIC SYSTEMSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Other communication equipment Other electrical/electro equipment Power cables Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Signal cables & connectors Switchboards & relays

855 - COMMON COMPUTER SYSTEMS

86 - ELECTRIC POWER SUPPLYAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Other electrical/electro equipment Power cables Project management, construction management Propellers & impellers

305-372_SFI_216.indd 363 07.08.2016 11:46:53

364


Regulators & switches Sensors, gauges & detectors Switchboards & relays

861 - GENERATORS/ALTERNATORSAggregates Control & automation systems Generators, alternators & dynamos Monitoring equipment

865 - TRANSFORMERSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

866 - BATTERIES AND CHARGERSAccumulators, condensers, chargers & batteries Bins, baskets, boxes and containers

867 - RECTIFIERS AND CONVERTERSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Other fluid transfer/treatment equipment Project management, construction management

305-372_SFI_216.indd 364 07.08.2016 11:46:54

365


Propellers & impellers Purification plants & fluid treatment Regulators & switches Sensors, gauges & detectors Switchboards & relays

868 - ELECTRIC SHORE SUPPLY SYSTEMSControl & automation systems

87 - COMMON ELECTRIC DISTRIBUTION SYSTEMSAggregates Alarm equipment Bridge inventory & equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Other electrical/electro equipment Power cables Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Signal cables & connectors Switchboards & relays

871 - MAIN SWITCHBOARDSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators

305-372_SFI_216.indd 365 07.08.2016 11:46:54

366


Monitoring equipment Other electrical/electro equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Subsea & seismic equipment Switchboards & relays

872 - EMERGENCY SWITCHBOARDSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment Other electrical/electro equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Subsea & seismic equipment Switchboards & relays

873 - GROUP STARTERS

874 - LOCAL STARTERS

875 - DISTRIBUTION PANELS AND BOARDSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos Meters & indicators Monitoring equipment

305-372_SFI_216.indd 366 07.08.2016 11:46:54

367


Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Subsea & seismic equipment Switchboards & relays

88 - ELECTRIC CABLE INSTALLATIONAlarm equipment Anchor, pipe & cable handling equipment Basic design & project development services Chains, wires & ropes Connectors, sockets, plugs & distribution boxes Control & automation systems Ducts, channels, trays and pipe support Electrical and electro work Electrical heating Engineering services Hoses, drums, packings & fittings Monitoring equipment Other electrical/electro equipment Positioning & navigation equipment Power cables Project management, construction management Signal cables & connectors Winches, drums & reels

881 - CABLE TRAYS AND INSTALLATION IN ENGINE AND BOILER ROOMS

882 - CABLE TRAYS W/INSTALLATION IN ACCOMMODATION

883 - CABLE TRAYS AND INSTALLATION ON DECK AND IN CARGO HOLDS

886 - SPECIAL CABLES

89 - ELECTRIC CONSUMER SYSTEMSAC units, air dryers, air cooling and heating components Aggregates Alarm equipment Centrals, consoles & panels Combustion engine Connectors, sockets, plugs & distribution boxes Consumables Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers

305-372_SFI_216.indd 367 07.08.2016 11:46:54

368


Electrical and electro work Electrical motors & starters Engineering services Fans Fluid valves & other armatures Gears Generators, alternators & dynamos Heat exchangers & steam generation Lighting equipment & armatures Meters & indicators Monitoring equipment Other electrical/electro equipment Other materials Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

891 - ELECTRIC LIGHTING SYSTEMS FOR ENGINE AND BOILER ROOMLighting equipment & armatures Safety equipment

892 - ELECTRIC LIGHTING SYSTEMS FOR ACCOMMODATIONLighting equipment & armatures Other inventory Safety equipment

893 - ELECTRIC LIGHTING SYSTEMS FOR DECK AND CARGO HOLDSLighting equipment & armatures Other nautical equipment

897 - ELECTRIC FANSElectrical heating Fans Heat exchangers & steam generation

898 - ELECTRIC MOTORSAggregates Alarm equipment Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Gears Generators, alternators & dynamos

305-372_SFI_216.indd 368 07.08.2016 11:46:54

369


Hydraulic motors & actuators Meters & indicators Monitoring equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays

305-372_SFI_216.indd 369 07.08.2016 11:46:54

370


9 - TURNKEY

92 - HULL TURNKEY GROUPS

920 - HULL AND HULL WORK, TURNKEY/COMPLETE

921 - HULL BLOCKS AND SECTIONS, TURNKEY/COMPLETE

927 - SURFACE PROTECTION, TURNKEY/COMPLETE

928 - INSULATION WORK, TURNKEY/COMPLETEPipes & pipe units

93 - CARGO EQUIPMENT TURNKEY GROUPS

930 - DRY CARGO LOADING/DISCHARGING SYSTEMS, TURNKEY/COMPLETE

933 - DECK CRANES INSTALLATIONS, TURNKEY/COMPLETE

935 - LIQUID CARGO LOADING/DISCHARGING SYSTEM, TURNKEY/COMPLETE

936 - LIQUID CARGO TREATMENT SYSTEM, TURNKEY/COMPLETE

94 - SHIP EQUIPMENT TURNKEY GROUPS

940 - MANOUVERING SYSTEM, TURNKEY/COMPLETE

941 - NAVCOM SYSTEM, TURNKEY/COMPLETE

943 - ANCHOR AND MOORING SYSTEM, TURNKEY/COMPLETE

305-372_SFI_216.indd 370 07.08.2016 11:46:54

371


95 - EQUIPMENT FOR CREW AND PASSENGERS TURNKEY GROUPS

950 - LIFE SAVING, TURNKEY/COMPLETE

951 - DOORS AND WINDOWS INSTALLATIONS, TURNKEY/COMPLETEBridge inventory & equipment Interior doors & windows Watertight/weathertight doors & windows

954 - ACCOMODATION, TURNKEY/COMPLETE

955 - GALLEY, PANTRY AND RESTAURANT, TURNKEY/COMPLETE

956 - LIFT AND ELEVATOR INSTALLATIONS, TURNKEY/COMPLETE

957 - HVAC INSTALLATIONS

958 - SANITARY INSTALLATIONS, TURNKEY/COMPLETE

959 - CABINS, TURNKEY/COMPLETE

96 - MAIN MACHINERY TURNKEY GROUPS

960 - DIESEL PROPULSION SYSTEM, TURNKEY/COMPLETE

962 - DIESEL-ELECTRIC PROPULSION SYSTEM, TURNKEY/COMPLETE

963 - PROPULSION TRAIN, TURNKEY/COMPLETE

965 - ELECTRIC POWER PRODUCTION, TURNKEY/COMPLETE

97 - MACHINERY SYSTEMS TURNKEY GROUPS

970 - FUEL SYSTEM, TURNKEY/COMPLETE

971 - LUB OIL SYSTEM, TURNKEY/COMPLETE

973 - COMPRESSED AIR SYSTEM, TURNKEY/COMPLETE

305-372_SFI_216.indd 371 07.08.2016 11:46:54

372


974 - CASING, TURNKEY/COMPLETE

975 - STEAM AND CONDENSATE SYSTEM, TURNKEY/COMPLETE

977 - BRIDGE ARRANGEMENT, TURNKEY/COMPLETE

978 - BRIDGE CONSOLES, TURNKEY/COMPLETE

979 - ENGINE CONTROL ROOM AND AUTOMATION, TURNKEY/COMPLETE

98 - SHIP COMMON SYSTEMS TURNKEY GROUPS

981 - FIREFIGHTING SYSTEM, TURNKEY/COMPLETE

986 - ELECTRICAL POWER DISTRIBUTION SYSTEMS, TURNKEY/COMPLETE

987 - ELECTRICAL CABLING INSTALLATIONS, TURNKEY/COMPLETE

989 - LIGHTING INSTALLATIONS, TURNKEY/COMPLETE

305-372_SFI_216.indd 372 07.08.2016 11:46:54

373

DIRECTORY OF SUPPLIERSDIRECTORY OF SUPPLIERS

373_470_LF_2016.indd 373 07.08.2016 11:47:08

DIRECTORY OF SUPPLIERS

374

AF OFFSHORE AERONMOLLIER AS

Company reg.no: 937775741 Nulandsvika 8, 4400 Flekkefjord, NORWAY Telephone: +47 38 32 78 00. Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. Established: 1979 AF Offshore AeronMollier AS is a total contractor of Heating, Ventilation and Air-Conditioning (HVAC) systems for the global shipping and offshore industry. Our long history has given us a reputation of being a competitive, flexible, high-competent supplier as well as a reliable partner. AF Offshore AeronMollier AS - an AF Group company AF Gruppen ASA is a listed contracting and industrial group. Our core business areas comprise Property, Building, Civil Engineering, Environment, Energy and Offshore Aeron is a part of the offshore division in AF Group. Since its formation, AF has been an independent company, proud of its own strength and ability to perform complex tasks. The entrepreneurial spirit at AF has been characterized by the ability and will to think differently and find better, more future-oriented ways in which to generate value. “Addressing Future” AERON MARINE HVAC systems are designed to ensure optimal climate solutions for people, cargo, machinery and instruments onboard all types of ships. We want to be involved in all stages of the building process, as well as during the lifespan of installed systems. The Feeling Of Fresh Air It is a known fact how important a well dimensioned HVAC system is for the indoor environment onboard a ship. Fresh air is vital to both personnel and machinery. Feeling good improves productivity. With an optimised AERON HVAC system installed - you are sure to get - “the feeling of fresh air.” We have always worked closely with our customers in the marine environment, learning their needs and meeting their special requirements. The experience gained has been incorporated into our products and made Aeron a highly competent supplier of marine HVAC systems. Our skilled staff will ensure that our plants perform in accordance to our customer’s expectations. AF Offshore AeronMollier AS will be at your service at any time with a professional staff ready to analyse and solve any problem. In conjunction with our world wide representatives and business partners, we satisfy the customer’s needs on a short BRANCH OFFICES: Department Bergen: Sjøkrigsskoleveien 15, N-5163 Laksevåg Phone: +47 55 38 80 80 Department Sandnes: Forusbeen 210, N-4313 Sandnes Phone: +47 51 96 26 00

373_470_LF_2016.indd 374 07.08.2016 11:47:08

375

DIRECTORY OF SUPPLIERS SUBSIDIARY Aeron Energy Technology Co Ltd Flat 7, 530 Huicheng Road, Huinan County, Pudong District, 201300 Shanghai P.R. China Phone: +86 21 52282590 Telefax: +86 21 52286173 E-mail: [email protected] See index of Products and Services:

AIR HANDLING UNITS - AC units, air dryers, air cooling and heating components System groups: 316,362,57

DAMPERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 109

ANTENNA COOLING UNITS - Antennas & transmitters System groups: 411

FANS - Fans System groups: 57

AUTOMATION SYSTEMS - Control & automation systems System groups: 109

HVAC - Accommodation work (including carpentry, HVAC) System groups: 57

AXIAL FANS - Fans System groups: 57

REFRIGERATION PLANTS - AC units, air dryers, air cooling and heating components System groups: 57

CABIN UNITS - AC units, air dryers, air cooling and heating components System groups: 57

SEPARATORS & COWLS - Separators & traps System groups: 73,803

CENTRIFUGAL FANS - Fans System groups: 57

SILENCERS - Exhaust components & silencers System groups: 109

CONTAINERS - Bins, baskets, boxes and containers System groups: 317

SPIRO PIPES - Pipes & pipe units System groups: 196

CONTROL SYSTEMS - Control & automation systems System groups: 109

WEATHER LOUVERS - Watertight/weathertight doors & windows System groups: 304,57

373_470_LF_2016.indd 375 07.08.2016 11:47:08


376

The Supplier is represented in the following countries:

BRAZIL CHILE CHINA CROATIA HONG KONG KOREA, SOUTH

ROMANIA SINGAPORE SPAIN TURKEY UNITED ARAB EMIRATES VIETNAM

AIR PRODUCTS AS

Company reg.no: 917997500 Vige Havnevei 78, P.O. Box 4103 Kongsgaard, 4689 Kristiansand, NORWAY Telephone: +47 38 03 99 00. Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. Air Products Norway was the first company to commercialize hollow fiber membranes for air separation onboard ships and offshoreinstallations. The first on-site nitrogen generation plant using hollow fiber membranes onboard a ship was installed in 1984 and the first on an offshore platform in 1985. To date Air Products Norway has delivered more than 1000 PRISM® membranes nitrogen systems on a wide variety of ship applications, and more than 220 PRISM® membranes nitrogen systems for offshore installations. See index of Products and Services:

HYDROGEN RECOVERY SYSTEMS - Boilers, burners and incinerators System groups: 64

NITROGEN GENERATORS - Generators, alternators & dynamos System groups: 376

INERT GAS SYSTEMS - Firefighting equipment - Inert gas components, CO2 System groups: 376

PURIFICATION SYSTEMS - Purification plants & fluid treatment System groups: 355,382,444,57,867

MEMBRANE SYSTEMS - Freshwater generation

373_470_LF_2016.indd 376 07.08.2016 11:47:08

377


ALFSEN OG GUNDERSON AS

Company reg.no: 910116207 Brynsveien 5, 0667 Oslo, P.O.Box 6052 Etterstad, 0601 Oslo, NORWAY Telephone: +47-22 70 77 00. Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. Established: 1926 NS-EN ISO 9001:2008 NS-EN ISO 14001:2004 Managing director: Haakon Bryhn Member of INTSOK Alfsen og Gunderson AS (AG) is a Norwegian-owned engineering and trading company working with Dehumidifiers and Air treatment, Water treatment and Pump systems. In addition to our own products and systems, we market specialized products from suppliers of international repute. Systems based on self-developed technology forms the major part of AG’s revenues and are exported worldwide. See index of Products and Services:

ADSORPTION DRYERS - AC units, air dryers, air cooling and heating components System groups: 37

PUMPS - Pumps & pump units System groups: 3,353,354,438,6,7,803

AIR DRYERS - AC units, air dryers, air cooling and heating components System groups: 37

TANK DRYING - Evaporators, condensers and receivers System groups: 37

DEHUMIDIFIERS - Air and gas treatment (dehydrators, air separators) System groups: 37

WATER TREATMENT - Purification plants & fluid treatment System groups: 584

DRINKING WATER TREATMENT - Freshwater generation System groups: 584

373_470_LF_2016.indd 377 07.08.2016 11:47:08


378

ALU DESIGN & SERVICES AS

Company reg.no: 892167222 Skibåsen 44, 4636 Kristiansand, NORWAY Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Company brochures and datasheets are available on the Internet. The future of chair design Chairs are the centre of the maritime world. They are where operations are conducted, decisions made and goals achieved. Good chairs provide good working environments. Bad chairs cause fatigue, discomfort and unacceptable performance. Alu Design makes the market’s leading maritime seating. Chairs that set new standards in design, comfort, build quality and value. Our seats provide the best possible working environments, allowing operators to excel. We are, and put you, comfortably ahead of the competition - creating chairs for tomorrow’s challenges today. We are Alu Design, the future of chair design. See index of Products and Services:

CHAIRS, PILOT CHAIRS - Bridge inventory & equipment - Furniture & cabinets System groups: 541

DECK RAILS - Bridge inventory & equipment - Furniture & cabinets System groups: 541

ANDA-OLSEN AS

Company reg.no: 935692113 Blindheim Industrivei 2e, 6020 Aalesund, NORWAY Telephone: +47-70 17 89 70. Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Anda-Olsen AS is a producer and supplier of DC and AC UPS systems for all types of vessels. Our unique Anda Power Solution sets a new standard for backup power systems onboard Vessels.

373_470_LF_2016.indd 378 07.08.2016 11:47:08

379


Other products include: Battery chargers and batteries Light fixings and light sources Battery containers and battery racks Serviceavdeling Tel: +47 70 17 89 66 E-post: [email protected] Avdeling Tromsø Anda-Olsen AS Avd. Tromsø Stakkevoll veien 51 9010 Tromsø Norway Tel:+47 77600220 Fax: +47 77600225 E-post: [email protected] Web: www.anda-olsen.no Avdeling Trondheim Anda-Olsen Avd. Trondheim Ingvald Ystgardsvei 3a 7047 Trondheim Norway Tel: +47 73525251 Fax: +47 73525222 E-post: [email protected] E-post: [email protected] Web: www.anda-olsen.no Avdeling Ski Besøksadresse: Anda-Olsen AS Anolitveien 4 1400 Ski Norway Tel +47 70178970 Fax: +47 70178971 E-post: [email protected] Web: www.anda-olsen.no Postadresse: Anda-Olsen AS avd. Ski Postboks 1384 1401 Ski

373_470_LF_2016.indd 379 07.08.2016 11:47:08


380

See index of Products and Services:

BATTERIES - Accumulators, condensers, chargers & batteries System groups: 866

LIGHT SOURCES - Lighting equipment & armatures System groups: 89

BATTERY BOXES - Bins, baskets, boxes and containers System groups: 866

MACHINERY DRIVES - Electrical motors & starters System groups: 12,6,65

BATTERY CHARGERS - Accumulators, condensers, chargers & batteries System groups: 866

MARINE AND OFFSHORE UPS - AC units, air dryers, air cooling and heating components System groups: 7

CONVERTERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 42,867


INDIA KOREA, SOUTH

SINGAPORE

373_470_LF_2016.indd 380 07.08.2016 11:47:08

381


AUTRONICA FIRE AND SECURITY AS, DIVISION MARITMECompany reg.no: 979975503 Haakon VIIs gate 4, Postboks 5620, 7483 Trondheim, NORWAY Telephone: +47 90 90 55 00. Telefax: +47-73 58 25 01 See index of Products and Services:

CARBON DIOXIDE MEASURING System groups: 815

OVERFILL ALARM SYSTEMS - Alarm equipment

EMERGENCY LIGHT - Safety equipment System groups: 503

PRESSURE ALARM SYSTEMS - Compressors

FIRE DETECTION SYSTEMS - Fire protection & detection equipment - Sensors, gauges & detectors System groups: 811

TEMPERATURE ALARM SYSTEMS - Sensors, gauges & detectors System groups: 381,79

FIRE EXTINGUISHING INSTALLATIONS - Firefighting equipment System groups: 81

VAPOUR ALARM SYSTEMS - Control & automation systems System groups: 35

FIRE-FIGHTING EQUIPMENT - Firefighting equipment

VOICE ALARM - Alarm equipment System groups: 42

GAS ALARM SYSTEMS - Alarm equipment System groups: 381

WATER INGRESS ALARM SYSTEMS - Monitoring equipment

LEVEL ALARM SYSTEMS - Control & automation systems - Monitoring equipment System groups: 381,79

WATERFOG SYSTEMS - Firefighting equipment System groups: 813

373_470_LF_2016.indd 381 07.08.2016 11:47:08


382

BAZE TECHNOLOGY ASCompany reg.no: 991658920 Moen 15, P.O. Box 1124, NO-3905 Porsgrunn, NORWAY Telephone: +47 94 80 06 00. Telefax: +47 35 10 54 99 See index of Products and Services:

ENTERTAINMENT EQUIPMENT - Entertainment equipment System groups: 546

INTERGRATED OPERATION EQUIPMENT - Project management, construction management System groups: 1

INFOTAINMENT SYSTEMS - Control & automation systems System groups: 42

MANAGEMENT OPERATION SYSTEMS - Control & automation systems System groups: 375,40

BEHA-HEDO INDUSTRIER ASCompany reg.no: 948905299 Frednesøya 21, 3933 Porsgrunn, P.O. Box 2704 Kjørbekk, 3702 Skien, NORWAY Telephone: +47 35 93 20 00. Telefax: +47 35 93 20 01 See index of Products and Services:

COFFEE MACHINES - Galley, pantry equipment and whiteware System groups: 551

REFRIGERATORS - Galley, pantry equipment and whiteware System groups: 541,551

DISHWASHING MACHINES - Galley, pantry equipment and whiteware System groups: 551

WASHING MACHINES - Cleaning equipment - Galley, pantry equipment and whiteware System groups: 551

ICE CUBE MACHINES - Galley, pantry equipment and whiteware System groups: 551

WASTE COMPACTORS - Sanitary & waste equipment System groups: 445

MESS EQUIPMENT - Galley, pantry equipment and whiteware System groups: 551

373_470_LF_2016.indd 382 07.08.2016 11:47:08

383


BERGEN AGENT ASCompany reg.no: 968117823 Rieber-Mohnsvei 2, Paradis, P.O. Box 431 Nesttun, 5853 Bergen, NORWAY Telephone: +47-55 92 28 90. Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.bergenagent.no Company brochures and datasheets are available on the Internet. 24 hours service - mobile telephone +47-975 85000 Warehouse facilities and site office at CCB offshore base, Ågotnes: Tel.: +47-55 92 28 90 Visiting: L4 Warehouse NO-5347 Kystbasen, Ågotnes Operation: Helge T. Seim - Tel.: +47-55 92 28 85 Arnfinn J. Seim - Tel.: +47-55 92 28 81 Accounts: Anne May Seim - Tel.: +47-55 92 28 87 Crew Transport: Frank Eriksen - Tel.: +47-98 20 50 02 BERGEN AGENT was established 1993, primarily to support and assist offshore clients, so far, handled by our sister company ALEX BIRGER GRIEG. BERGEN AGENT’s force is a small organization, manned and managed by well-experienced personnel. Dedicated staff and ‘single point of contact’ will be reflected in a high grade of efficiency, throughout the project. Our personnel will offer the best service within maritime logistics and ship agency, incl mob/demob operations and crew change arrangements. BERGEN AGENT is located between the town centre/harbour and the airport. See index of Products and Services:

SHIPAGENTS - Administration, broking, finance & insurance services

373_470_LF_2016.indd 383 07.08.2016 11:47:08


384

BERGEN PLASTICS RUBBER SOLUTIONS ASCompany reg.no: 930124753 Sandbrekkeveien 85, P.O. Box 47 Nesttun, 5852 Bergen, NORWAY Telephone: +47 55 92 57 20. Telefax: +47 55 92 57 49 See index of Products and Services:

METAL MACHINING - Machinery and piping work System groups: 8

TECNICAL PLASTIC COMPONENTS - Plastic System groups: 196

TECHNICAL RUBBER APPLICATIONS - Other materials System groups: 196

BRUNVOLL A.S

Company reg.no: 995 884 070 Eikremsvingen 2 , 6422 Molde, NORWAY Telephone: +47-71 21 96 00. Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no Established: 1912 Managing Director: Odd Tore Finnøy Member of ”The Prime Group of Norway.” 24 hours service assistanse: +47 71 21 96 70 Brunvoll’s operation is dedicated to thrusters, and we supply and service complete thruster packages from A to Z. We take full responsibility for your thruster needs, including electric, hydraulic and diesel drive system packages. We can tailor systems to your specific propulsion and manoeuvring requirements, cutting installation time and life cycle costs. Brunvoll offers a complete technological environment with in-house expertise in hydraulics, hydrodynamics, electronics, mechanical and electrical engineering, and production. We are satisfied When we have supplied the quality thruster system specified, at a competetive price, on time, and when we have provided the support services required and expected.

373_470_LF_2016.indd 384 07.08.2016 11:47:08

385


- Traditions and marine experience since 1912 - 330 employees at main site in Molde, Norway - Modern production facilities - Quality system according to ISO 9001 See index of Products and Services:

AZIMUTH COMBI THRUSTERS - Thrusters and pods System groups: 404,63,635

PROPULSION - Other engine & propulsion equipment System groups: 40

AZIMUTH THRUSTERS, RETRACTABLE - Thrusters and pods System groups: 404,63,635

REM DRIVEN THRUSTERS (RDT) - Thrusters and pods System groups: 404,63,635

BOW PROPELLERS - Propellers & impellers System groups: 404

THRUSTER CONTROL, ALARM AND MONITORING SYSTEM - Control & automation systems System groups: 40

LOW NOISE TUNNEL THRUSTERS - Thrusters and pods System groups: 404,63,635

THRUSTERS - Thrusters and pods System groups: 404,635

PROPELLERS - Propellers & impellers System groups: 63

TUNNEL THRUSTERS - Thrusters and pods System groups: 404,63,635


ARGENTINA AUSTRALIA BRAZIL CHILE CHINA CROATIA DENMARK FINLAND FRANCE GERMANY GREECE HONG KONG

ICELAND INDIA ITALY KOREA, SOUTH POLAND RUSSIA SINGAPORE SPAIN TURKEY UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES

373_470_LF_2016.indd 385 07.08.2016 11:47:08


386

CENTA TRANSMISJONER A.S.Company reg.no: 951166626 Breiliveien 49, P.O. Box 1551 Kilen, 3206 Sandefjord, NORWAY Telephone: +47-33 48 31 00. Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Manager: Børre Karlsrud Mob.: +47-90 13 90 28. e-mail: [email protected] Mechanical Engineer Sales: Øyvind Gjerstad Mob.: +47-90 96 77 04. e-mail: [email protected] Mechanical Engineer Sales: Stig Gøran Berget Mob.: +47-90 63 28 66 Logistics: Stig Torbergsen Mob.: +47-41 49 37 80. e-mail: [email protected] Established: 1989 The company is a subsidiary of CENTA Antriebe Kirschey GmbH in Germany. Main activities are power transmissions. The company represents: - CENTA Antriebe Kirschey GmbH, Haan, Germany: Elastic and flexible couplings. - REXNORD Antriebstechnik, Dortmund, Germany: Couplings, brakes, torque limiters, backstops and freewheels. - MALMEDIE Antriebstechnik GmbH., Düsseldorf, Germany: Gearcouplings. - SEW-Eurodrive a.s., Moss, Norway: Gearboxes, gearmotors, gearsystems, electric motors, inverters. - Danaher Motion, Stockholm, Sweden: Linear actuation systems. - Karl E. Brinkmann GmbH, KEB Antriebstechnik, Barntrup, Germany: Brakes, cluches and inverters See index of Products and Services:

ACTUATORS - Hydraulic motors & actuators - Pneumatic actuators System groups: 601,651

FLEXIBLE ENGINE MOUNTS - Other engine & propulsion equipment System groups: 196

BRAKE EQUIPMENT - Brakes, couplings & shafts System groups: 403,406,432

GEARS - Gears System groups: 637,638

The Supplier is represented in the following countries: UNITED KINGDOM

373_470_LF_2016.indd 386 07.08.2016 11:47:08

387


CLEAN MARINE ASStrandveien 15, 1366 Lysaker, NORWAY Telephone: +47 21 04 33 11 See index of Products and Services:

EMISSION CLEANING SYSTEMS - Cleaning equipment System groups: 123,444,7

COMROD COMMUNICATION A/S

Company reg.no: 934335724 Fiskavegen 1, 4120 Tau Stavanger., NORWAY Telephone: +47-51 74 05 00. Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Company brochures and datasheets are available on the Internet. Comrod designs and manufactures military antennas, marine antennas, telescopic & sectional masts, power supplies, battery chargers and specialist composite products Comrod Communication Group is an international company with development, production, sales & marketing of antennas and antenna systems, support masts, power supplies and battery chargers to the defence communication market. The Group also supplies antennas and antenna systems for commercial marine, as well as composite industrial products for the offshore and defence industry. Comrod Communication Group products are associated with innovative, high quality communication solutions and long-lasting products. The Norwegian subsidiary, Comrod AS, is a supplier of antennas, antenna systems and power supplies, mainly for the defence market, but also for other maritime and commercial applications. Comrod France SA, is a supplier of masts and mast systems, antennas and composite industrial products. Comrod Sweden AB (formerly WIBE Telescopic Masts) are a world leader in the design and manufacture of crank-up aluminium telescopic masts. The Group headquarters are located at Stavanger in South-Western Norway.

373_470_LF_2016.indd 387 07.08.2016 11:47:08


388


ANTENNAS - Antennas & transmitters System groups: 411

COMPOSITE PRODUCTS - Additives & agents System groups: 196

ANTENNAS, DEFENCE - Antennas & transmitters System groups: 411

MASTS - Davits and masts System groups: 411,412

ANTENNAS, MARINE & CIVIL - Antennas & transmitters System groups: 411,412

VHF - Antennas & transmitters System groups: 411,422,424


AUSTRALIA BELGIUM CHINA FRANCE GERMANY KOREA, SOUTH NETHERLANDS, THE

SINGAPORE SWEDEN TAIWAN UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES

DAHL AS, BRØDRENECompany reg.no: 945757280 Brynsengveien 5, P.O. Box 6146 Etterstad, 0602 Oslo, NORWAY Telephone: +47-22 72 55 00. Telefax: +47 22 65 87 65 See index of Products and Services:

373_470_LF_2016.indd 388 07.08.2016 11:47:09

389


ACID PROOF PIPES - Pipes & pipe units

PIPES - Pipes & pipe units System groups: 196

ARMATURE - Lighting equipment & armatures System groups: 891,892,893

REDUCTION VALVES - Air & gas valves - Fluid valves & other armatures System groups: 73,75

BALL VALVES - Fluid valves & other armatures System groups: 6,7

SANITARY EQUIPMENT - Sanitary & waste equipment System groups: 58

BATHROOM EQUPMENT - Sanitary & waste equipment System groups: 583

SCREWS - Brackets, bolts, fasteners and locking devices - Lifesaving equipment - Personal equipment - Workshop equipment System groups: 196

BUTTERFLY VALVES - Air & gas valves - Fluid valves & other armatures System groups: 57

SPRINKLER SYSTEMS - Firefighting equipment System groups: 813

CHECK VALVES - Air & gas valves - Fluid valves & other armatures System groups: 309

STAINLES STEEL FURNISHMENTS - Furniture & cabinets - Stainless steel System groups: 556

ELECTRICAL TOOLS - Workshop equipment System groups: 442

STAINLESS STEEL PIPES - Pipes & pipe units - Stainless steel

FIRE-FIGHTING EQUIPMENT - Firefighting equipment System groups: 505

STOP VALVES - Air & gas valves - Fluid valves & other armatures

FITTINGS - Hoses, drums, packings & fittings System groups: 196

TOOLS - Workshop equipment System groups: 44

GATE VALVES - Air & gas valves - Fluid valves & other armatures System groups: 513

WATER HEATERS - Heat exchangers & steam generation System groups: 581

HAND TOOLS - Workshop equipment System groups: 442

WELDING EQUPMENT - Welding & cutting equipment System groups: 441

373_470_LF_2016.indd 389 07.08.2016 11:47:09


390

DALSEIDE SHIPPING SERVICES ASCompany reg.no: 933888967 Bekkjarviksundet 1, 5397 Bekkjarvik, NORWAY Telephone: +47-56 18 12 00. Telefax: +47-53 18 12 01 See index of Products and Services:

ANTI-CORROSION EQUIPMENT - Anti-corrosion System groups: 443

CORROSION PROTECTION - Anti-corrosion System groups: 27,28

CHIPPING HAMMERS - Workshop equipment System groups: 442

DECK MACHINERY - Cranes, crane equipment, lifting devices & booms - Winches, drums & reels System groups: 274

COMPRESSED AIR TOOLS - Workshop equipment System groups: 44

RUST SCALING HAMMERS - Workshop equipment System groups: 443

373_470_LF_2016.indd 390 07.08.2016 11:47:09

391


EKORNES CONTRACT ASCompany reg.no: 954811506 6239 Sykkylven, NORWAY Telephone: +47 70 25 52 00. Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Ekornes Contract er Ekornes sitt salgsapparat mot prosjektmarked og næringsliv. 7 ansatte jobber med salg og planlegging av prosjekter. I tillegg til å tilby produkter fra den brede Ekornes® og Stressless®-kolleksjonen, har vi underleverandører i flere segmenter. Ekornes Contract har lang erfaring og meget gode referanser innen totalinnredning av skip. Våre modulsystemer gir svært stor fleksibilitet, og vi er gjerne med som en medspiller i planleggingen av din skipsinnredning. Vi tilbyr spesialløsninger med utgangspunkt i vår basiskolleksjon, slik at du alltid kan være trygg på at vi har en skreddersydd løsning for deg. Alle våre produkter svarer til Veritas’ rattsertifisering, samt brannkravene i den britiske standarden BS5852 tk. 5. Våre huder, Batick, Cori og Paloma er dessuten godkjent med flammehemmende spesifikasjoner. Madrassen Svane®Original er i tillegg miljømerket med Svanen Bransjekontor: Ekornes Beds AS - Svane® madrasser NO-1900 Fetsund NORWAY Telephone: +47 63 88 33 00 Telefax: +47 63 88 02 73 Email: [email protected] www.ekornes.no See index of Products and Services:

FURNISHING - Furniture & cabinets System groups: 541

SEATS - Furniture & cabinets

MATTRESS - Furniture & cabinets System groups: 541

373_470_LF_2016.indd 391 07.08.2016 11:47:09


392

ELPRO INDUSTRIER ASCompany reg.no: 984738528 7318 Agdenes, NORWAY Telephone: +47-40 00 67 40. Telefax: +47-72 49 12 17 See index of Products and Services:

CONTROLING DESKS - Centrals, consoles & panels - Control & automation systems System groups: 79

SWITCHBOARDS - Switchboards & relays System groups: 871,872,875

DOORFRAMES - Interior doors & windows - Watertight/weathertight doors & windows System groups: 51

WINDOW FRAMES - Interior doors & windows - Watertight/weathertight doors & windows System groups: 51

ELTORQUE ASCompany reg.no: 976944968 Lyng Industrial Park, 7125 Vanvikan, NORWAY Telephone: +47-74 85 55 20. Telefax: +47-74 85 55 12 See index of Products and Services:

ACTUATORS - Pneumatic actuators System groups: 381,601,651,79

FLOW CONTROL SYSTEM - Control & automation systems System groups: 6

CONTROL INTERFACES - Control & automation systems System groups: 6

QUARTER-TURN ACTUATORS - Hydraulic motors & actuators System groups: 651

373_470_LF_2016.indd 392 07.08.2016 11:47:09

393


ENWA WATER TECHNOLOGY AS

Company reg.no: 992592451 Skansegaten 2, Tolboden, 4001 Stavanger, NORWAY Telephone: +47-51 63 43 00. Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. Avdelingskontorer: Enwa AS, Oslo Tlf.: 22 32 39 00. Telefax: 22 30 40 11. Enwa AS, Trondheim Tlf.: 72 89 84 10. Telefax: 72 89 84 11. Enwa AB, Sverige Tlf.: +46-31 742 90 50. Telefax: +46-31 742 90 60. Enwa AB, Sundsbruk, Sverige Tlf.: +46-60 537 17 0. Telefax: +46-60 537 06 6. Enwa AB, Haninge, Sverige Tlf.: +46-8 776 33 23. Telefax: +46-8 776 33 23. Enwa AS, Sandefjord Tlf.: 33 48 80 50. Telefax: 33 47 89 20. Verksteder og service world wide. See index of Products and Services:

ANTI-CORROSION AGENTS - Anti-corrosion System groups: 27,28

DRINKING WATER TREATMENT - Freshwater generation System groups: 584

ANTI-CORROSION EQUIPMENT - Anti-corrosion System groups: 443

HEATING PLANTS - Heat exchangers & steam generation System groups: 577

ANTI-CORROSION SYSTEMS - Anti-corrosion System groups: 27,28

REFRIGERATION SYSTEMS - AC units, air dryers, air cooling and heating components System groups: 362,433,554

COOLING WATER TREATMENT - Cooling components for fluids - Purification plants & fluid treatment System groups: 722

REVERSE OSMOSIS PLANTS - Purification plants & fluid treatment System groups: 584,761

DRINKING WATER FILTERS - Fluid filters - Freshwater generation System groups: 584

WATER TREATMENT - Purification plants & fluid treatment System groups: 584

373_470_LF_2016.indd 393 07.08.2016 11:47:09


394

EUROROPE MARINE AS

Company reg.no: 986466800 Stensarmen 9, 3212 Tønsberg, NORWAY Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. EuroRope Marine is the continuation of ScanRope Marine, a well known and highly trusted supplier of mooring ropes and accessories to the marine industry. The company’s main credentials remain the renowned product range Karat ®, the experienced staff, and the high degree of service we provide. The name change is the final stage in a transition that started in 2004 when the company became part of EUROROPE S.A., one of Europe’s largest and most dynamic rope manufacturers. All Karat ® rope manufacturing takes place at a large and ultra-modern manufacturing plant in Piraeus, Greece. The factory was built in 2002 and has achieved its goal of high efficiency and unsurpassed quality. For our customers this means receiving reliable products at competitive prices delivered to the agreed destination at the agreed time. EuroRope Marine’s highly skilled staff based in Tønsberg, Norway, has a reputation for friendly service and a fundamental understanding of the shipping companies’ needs. Karat Maxi mooring ropes are therefore stocked at strategic ports throughout the world, including Rotterdam, Aberdeen, Houston, Singapore and Dubai. Furthermore, quality wire ropes and rope accessories are procured from approved manufacturers to ensure our customers a complete range of marine ropes and hardware. See index of Products and Services:

FAIRLEAD SHACKLES - Blocks & shackles System groups: 274,32

ROPES - Chains, wires & ropes System groups: 43,437

MOORING LINES - Anchor, pipe & cable handling equipment System groups: 43

WINCH LINES - Anchor, pipe & cable handling equipment - Winches, drums & reels System groups: 274,43

MOORING LINKS - Anchor, pipe & cable handling equipment System groups: 43


GERMANY JAPAN SINGAPORE

SPAIN UNITED ARAB EMIRATES UNITED STATES

373_470_LF_2016.indd 394 07.08.2016 11:47:09

395


FINNØY GEAR & PROPELLER AS

Company reg.no: 956659485 Finnøy, 6487 Harøy, NORWAY Telephone: +47 71 27 60 00. Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. Finnøy was founded in 1884. From 1902 to 1975 we produced engines with propellers. Our first hydraulic controllable pitch propeller was delivered in 1932. Since 1975 we have specialised in the design and manufacture of gearboxes and controllable Pitch propellers. Our product range is reduction gearboxes, controllable pitch propellers, fixed nozzles, steering nozzles and remote controls. We have a continous Development programme in propeller systems and our intention is to be a market leader in this field. Finnøy is located in modern production halls with modern production machines to meet the demands the market requires. See index of Products and Services:

GEARBOXES - Gears

REMOTE CONTROL - Control & automation systems System groups: 381,79



AUSTRALIA CHINA GERMANY GREECE INDIA KOREA, SOUTH ROMANIA RUSSIA

SINGAPORE SOUTH AFRICA SPAIN TURKEY UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES

373_470_LF_2016.indd 395 07.08.2016 11:47:09


396

FIRE FIGHTING SYSTEMS ASCompany reg.no: 883747062 Tykkemyr 27, 1597 Moss, NORWAY Telephone: +47 69 24 49 90. Telefax: +47 69 24 49 95 See index of Products and Services:

FIRE-FIGHTING SYSTEMS - Firefighting equipment System groups: 505,81

FREMO ASCompany reg.no: 850977712 Helgeroveien 3, P.O. Box 38, 3291 Stavern, NORWAY Telephone: +47 33 19 65 00. Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. Established: 1916 General Manager: Sverre R. Nyegaard Developing and manufacturing of Fremo oil and gas burners, booster pumps, and oil pre-heaters. See index of Products and Services:

NOZZLES - Air nozzles, jealousies and batteries - Fluid nozzles & mixing batteries System groups: 401,404,62

PUMP UNITS - Pumps & pump units - Regulators & switches System groups: 309,438,439

OIL BURNERS - Boilers, burners and incinerators System groups: 577,641,644

PUMPS - Pumps & pump units System groups: 3,6,7

OIL FILTERS - Fluid filters System groups: 70,71

SCREW PUMPS - Pumps & pump units

OIL PREHEATERS - Preheaters System groups: 703

373_470_LF_2016.indd 396 07.08.2016 11:47:09

397


GJERDE AS, JOHNCompany reg.no: 931973673 Bryggjebakken, 6083 Gjerdsvika, NORWAY Telephone: +47 70 02 65 00. Telefax: +47 70 02 65 01 See index of Products and Services:

CHECK VALVES - Fluid valves & other armatures System groups: 3

VALVES - Fluid valves & other armatures System groups: 3

FUEL FILTER - Fluid filters System groups: 6

GLAMOX INTERNATIONAL ASABrudalsveien 216, 6011 Ålesund, NORWAY Telephone: +47 70 14 30 16 See index of Products and Services:

ARCHITECTURAL LIGHTS - Lighting equipment & armatures System groups: 89

HELIDECK-LIGHTING - Lighting equipment & armatures System groups: 427,89,893

AREA LIGHTING - Lighting equipment & armatures System groups: 503,89,893

LIGHTING - Lighting equipment & armatures System groups: 89,891,892

DOWNLIGHTS - Lighting equipment & armatures System groups: 89,892

NAVIGATION LIGHTS - Lighting equipment & armatures System groups: 893

EMERGENCY LIGHTS - Lighting equipment & armatures System groups: 503,89

SEARCHLIGHTS - Lighting equipment & armatures System groups: 89

EXPLOSION PROOF LIGHTS - Lighting equipment & armatures System groups: 89

TECHNICAL LIGHTS INDOOR - Lighting equipment & armatures System groups: 89

FLOODLIGHTS - Lighting equipment & armatures - Other nautical equipment System groups: 893

TECHNICAL LIGHTS OUTDOOR - Lighting equipment & armatures System groups: 89

HEATERS - Electrical heating System groups: 57

373_470_LF_2016.indd 397 07.08.2016 11:47:09


398

GLAVA ASCompany reg.no: 912008754 P.O. Box F, 1801 Askim, NORWAY Telephone: +47 69 81 84 00. Telefax: +47 69 81 84 78 See index of Products and Services:

COMFORT ISOLATION - Insulation System groups: 51

FIRE INSULATION - Fire protection & detection equipment System groups: 51

GRIEG A/S, ALEX. BIRGERCompany reg.no: 912085775 Rieber-Mohns vei 2, 5230 Paradis, P.O. Box 432 Nesttun, 5853 Bergen, NORWAY Telephone: +47-55 92 28 80. Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no Company brochures and datasheets are available on the Internet. 24 hour service - mobile telephone +47-975 85000 Warehouse facilities and site office at CCB offshore base, Ågotnes: Tel.: +47-55 92 28 90 Visiting: L4 Warehouse Kjeller NO-5347 Kystbasen, Ågotnes The Company was founded in 1891 by Alexander Birger Grieg, close relative to the Composer Edvard Grieg. From its founding the company brokered small tankers and dry cargo chartering both shortsea and deep sea. However since 1982 the company has been focused on specializing within chartering of oversized, awkward & heavy project cargo together with Port Agencies. In 1972 Mr. Arnfinn J. Seim entered the company and since 1995 the sole Owner, however with the decision to maintain the company name as an easy reference to quality, dedication and personal service. Today customers around the world, still recognize Alex. Birger. Grieg A/S as a top professional ship broker company, with great expertize within the Heavy Lift sector & 1st Class Port Agency Services all over Norway. See index of Products and Services:

BUNKER BROKERS - Administration, broking, finance & insurance services

SHIPAGENTS - Administration, broking, finance & insurance services

BUNKER TRADERS - Administration, broking, finance & insurance services

SHIPBROKERS - Administration, broking, finance & insurance services

373_470_LF_2016.indd 398 07.08.2016 11:47:09

399


HALVORSEN POWER SYSTEMJåttåflaten 10, 4020 Stavanger, NORWAY Telephone: +47 992 85 600 See index of Products and Services:

ALARM & MONITORING SYSTEMS - Alarm equipment - Monitoring equipment System groups: 381,79,792

SMART LINK - Documentation & data management

FIN STABILIZATION - Steering equipment & stabilizers System groups: 405

TANK LEVEL SYSTEMS - Control & automation systems System groups: 79

POWER MANAGEMENT - Alarm equipment - Monitoring equipment System groups: 381,79,792

373_470_LF_2016.indd 399 07.08.2016 11:47:09


400

HANSEN PROTECTION AS

Company reg.no: 871200092 Tykkemyr 27, P.O. Box 218, 1501 Moss, NORWAY Telephone: +47 69 00 13 00. Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. We develop, design and manufacture both standard and tailor-made hi-tech textile products for various sectors. We have more than 100 years of experience in manufacturing protective clothing and life jackets for seafarers. Our teams have been designing, developing and making rescue and survival suits for the North Sea Oil Industry since 1976. In addition our activities include canopies for leisure boats, as well as products for agricultural applications and the health sector. We are also a major supplier to the Norwegian Defence Forces. . See index of Products and Services:

IMMERSION SUITS - Lifesaving equipment - Safety equipment System groups: 503

THERMAL PROTECTION AID - Fire protection & detection equipment

LIFE JACKETS - Lifesaving equipment - Personal equipment System groups: 503

TRANSPORT SUITS - Lifesaving equipment System groups: 503

PASSENGER SUITS - Lifesaving equipment System groups: 503

WORK/SURVIVAL SUITS - Personal equipment - Safety equipment System groups: 503

SPECIAL SUITS - Lifesaving equipment System groups: 503


AUSTRALIA BELGIUM CANADA CHINA DENMARK FINLAND GERMANY

NETHERLANDS, THE POLAND SINGAPORE SWEDEN UNITED KINGDOM UNITED STATES

373_470_LF_2016.indd 400 07.08.2016 11:47:09

401


HARDING SAFETY AS

Company reg.no: 990322767 Seimsvegen 116, 5472 Seimsfoss, NORWAY Telephone: +47 53 48 36 00. Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. Harding is the global market leader of marine life-saving systems, with a solid track record of deliveries to offshore installations and vessels worldwide. The company developed the first lifeboat (FF1200) fulfilling the new regulation, DNV 406, for the North Sea and it is also the developer of the enclosed davit system. Harding was formed in 2013 when Schat Harding and Noreq AS merged together in order to form the world’s leading manufacturer and supplier of lifesaving equipment. Our history, however, goes all the way back to the 1920’s. Bergen Branch: Lønningsflaten 25, 5258 Blomsterdalen, Bergen Phone: +47 53 48 36 00 - Fax: +47 53 48 36 01 Stavanger Branch: Hammaren 23, 4056 Tananger - Stavanger Phone + 47 53 48 37 07 - +47 53 48 36 01 Ølve Branch: Ølvesvegen 447, 5637 Ølve See index of Products and Services:

DAVITS - Davits and masts System groups: 501

LIFEBOATS - Lifeboats/rafts & other boats System groups: 501,503

HOOKS - Blocks & shackles System groups: 274,344

RESCUE BOATS - Lifeboats/rafts & other boats - Lifesaving equipment System groups: 501,503


AUSTRALIA BRAZIL CHINA CYPRUS DENMARK GERMANY KOREA, SOUTH

MALAYSIA POLAND RUSSIA SINGAPORE SPAIN UNITED ARAB EMIRATES UNITED STATES

373_470_LF_2016.indd 401 07.08.2016 11:47:09


402

HELSETH A/SCompany reg.no: 959730784 Bakliveien 11-13, 6450 Hjelset, NORWAY Telephone: +47-71 20 29 00. Telefax: +47-71 20 29 02 See index of Products and Services:

HOT DIP GALVANIZING - Anti-corrosion System groups: 276


PITCH PROPELLERS, CONTROLLABLE - Propellers & impellers System groups: 634

HERNIS SCAN SYSTEMS ASCompany reg.no: 953054086 Tangen Alle 41, P.O. Box 791 Stoa, 4809 Arendal, NORWAY Telephone: +47-37 06 37 00 See index of Products and Services:

CABLES - Power cables System groups: 85,86,87,88

CONTROL PANELS - Centrals, consoles & panels System groups: 1

CAMERA STATIONS, HAZARDOUS AREAS - Control & automation systems System groups: 1

CONTROL SYSTEMS - Control & automation systems System groups: 1,17,381

CAMERA STATIONS, SAFE AREAS - Control & automation systems System groups: 1

DISPLAY UNITS - Control & automation systems System groups: 1

CCTV - Monitoring equipment - Other communication equipment System groups: 416

373_470_LF_2016.indd 402 07.08.2016 11:47:09

403


HØGLUND MARINE AUTOMASJON ASCompany reg.no: 966107650 Carl 15 gate 19, 3150 Tolvsrød, NORWAY Telephone: +47 33 41 41 50. Telefax: +47 33 41 49 46 See index of Products and Services:

ALARM LOGGER - Alarm equipment System groups: 109,42

POWER MANAGEMENT SYSTEMS - Control & automation systems System groups: 795

FUEL OIL CALCULATION SYSTEM - Control & automation systems System groups: 196,6,62

PROCESS CONTROL SYSTEMS - Control & automation systems

IKM INSTRUTEK ASCompany reg.no: 883385152 Elveveien 28, 3262 Larvik, NORWAY Telephone: +47 33 16 57 00. Telefax: +47 33 16 57 01

373_470_LF_2016.indd 403 07.08.2016 11:47:09


404


AIS (AUTOMATIC IDENTIFICATION SYSTEMS) - Detection & identification equipment - Safety equipment

NAVIGATION EQUIPMENT - Positioning & navigation equipment System groups: 41

AUTOMATION EQUIPMENT - Control & automation systems System groups: 79

PRESSURE SWITCHES - Regulators & switches System groups: 12

CALIBRATION EQUIPMENT - Meters & indicators - Workshop equipment System groups: 442

PRESSURE TRANSMITTERS - Sensors, gauges & detectors System groups: 442,6,7

CCTV - CLOSED CIRCUIT TELEVISION - Satellite communication System groups: 546

RADARS - Detection & identification equipment System groups: 411

COMMUNICATION SYSTEMS - Other communication equipment

SATELLITE COMMUNICATIONS - Satellite communication System groups: 421,424

DATA LOGGERS - Documentation & data management System groups: 109

SOLENOID VALVES - Fluid valves & other armatures System groups: 70

ECDIS - Positioning & navigation equipment

SSAS - SHIP SECURITY ALERT SYSTEM - Control & automation systems System groups: 1

GAS DETECTORS - Sensors, gauges & detectors System groups: 381

TELEPHONE SYSTEMS - Radio & telephone communication System groups: 425

GMDSS - Detection & identification equipment - Safety equipment System groups: 421

TEMPERATURE SWITCHES - Sensors, gauges & detectors System groups: 381,79

GPS - Positioning & navigation equipment System groups: 412

THERMO CAMERAS - Monitoring equipment - Other communication equipment System groups: 416

GYRO COMPASSES - Positioning & navigation equipment System groups: 413

VHF RADIO - Radio & telephone communication System groups: 424

LRIT - LONG RANGE IDENTIFICATION AND TRACKING SYSTEM - Detection & identification equipment System groups: 196

373_470_LF_2016.indd 404 07.08.2016 11:47:09

405


IMS ASCompany reg.no: 932402920 Moland Vest, 4994 Akland, NORWAY Telephone: +47 37 14 32 00. Telefax: +47 37 14 32 01 See index of Products and Services:

AUTOMATION - Control & automation systems System groups: 79

MACHINING - Machinery and piping work System groups: 196

DOORS, WATERTIGHT - Watertight/weathertight doors & windows System groups: 513,514

OIL SPILL RESPONSE - Anti-pollution equipment System groups: 153

LASER CUTTING - Welding & cutting equipment System groups: 441

SAFETY WINDOWS - Watertight/weathertight doors & windows System groups: 951

JASON ENGINEERING ASCompany reg.no: 942135610 Grønland 82, P.O. Box 2151, 3003 Drammen, NORWAY Telephone: +47-32 20 45 50. Telefax: +47-32 20 45 60 See index of Products and Services:

DISPERSANT SYSTEMS - Control & automation systems System groups: 814

PUMPS - Pumps & pump units System groups: 3,7

FIRE MONITORS - Firefighting equipment

TELESCOPIC MASTS - Firefighting equipment

FIREFIGHTING SYSTEMS - Firefighting equipment System groups: 816,818,819

TRANSMISSIONS - Pumps & pump units System groups: 3,7

GEARS - Gears System groups: 638

373_470_LF_2016.indd 405 07.08.2016 11:47:09


406

JETS VACUUM AS

Company reg.no: 857788982 Myravegen 1, 6060 Hareid, NORWAY Telephone: +47 70 03 91 00. Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com A SMARTER SANITARY SYSTEM FOR ANY TYPE OF VESSEL The scalability of the JetsT vacuum solutions allow their use in virtually every possible scenario, from one-toilet cabin systems, to the world’s largest cruise vessels with thousands of passengers. In-line installation of the VacuumaratorT pump combined with a small footprint and low weight allows for unique installation flexibility and considerable weight savings. These advantages, along with low energy consumption, make JetsT the preferred choice for designers, yards and owners. Easy to install, operate and maintain, JetsT equipment is renowned for its high level of quality and reliability, which is appreciated by crews and passengers on the high seas, as well as by our customers onshore. A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience. See index of Products and Services:

SEAWAGE TREATMENT PLANTS - Purification plants & fluid treatment System groups: 58

VACUUM TOILETS - Sanitary & waste equipment System groups: 583

VACUUM PUMPS - Pumps & pump units System groups: 583

373_470_LF_2016.indd 406 07.08.2016 11:47:10

407


JOTRON ASCompany reg.no: 917713324 Østbyveien 1, P.O. Box 54, 3280 Tjodalyng, NORWAY Telephone: +47-33 13 97 00. Telefax: +47-33 12 67 80 See index of Products and Services:


RADAR TRANSPONDERS - Antennas & transmitters System groups: 411

ANTENNAS - Antennas & transmitters System groups: 411

SEARCH AND RESCUE RADAR TRANSPONDERS - Detection & identification equipment System groups: 411

COMMUNICATION - Other communication equipment System groups: 42

SOUND RECEPTION SYSTEMS - Control & automation systems System groups: 42

EMERGENCY POSITION INDICATING RADIO BEACON- EPIRB/S-VDR - Positioning & navigation equipment System groups: 41

TELEPHONE SYSTEMS - BATTERYLESS - Radio & telephone communication System groups: 42

INTEGRATED COMMUNICATION SYSTEMS - Other communication equipment System groups: 42

UHF RADIO - Radio & telephone communication System groups: 424

INTERCOM SYSTEMS - Control & automation systems System groups: 42

VHF RADIO - Radio & telephone communication System groups: 424

PUBLIC ADDRESS SYSTEM - Control & automation systems System groups: 42

373_470_LF_2016.indd 407 07.08.2016 11:47:10


408

JOTUN COATINGS

Company reg.no: 923248579 Hystadveien 167, 3209 Sandefjord, P.O. Box 2021, 3202 Sandefjord, NORWAY Telephone: +47-33 45 70 00. Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings. We have 71 companies and 36 production facilities on all continents, and are represented in more than 90 countries with our network of agents, branch offices, distributors and sales offices around the world. Our operations cover development, production, marketing, R&D and sales of paints and coatings to protect and decorate surfaces in residential, shipping, and industrial markets. Jotun is organised in four segments and seven geographical regions, with its head office located in Sandefjord, Norway. Protective coatings Our protective coatings are protecting assets in industries such as offshore, energy, infrastructure and hydrocarbon processing. Marine coatings As the world’s leading provider of marine coatings we supply to ship owners, management companies and others for both newbuilding and dry dock. Powder coatings Pur powder coatings are supplied to manufacturers of appliances, furniture, building components, pipelines and general industries. Decorative paints Our interior and exterior paints are being used by consumers and professionals worldwide, for protection and decoration. See index of Products and Services:

ANTI-CORROSIVE AGENTS - Anti-corrosion System groups: 27,28

PRIMERS - Coatings & paint System groups: 27

ANTIFOULING - Anti-corrosion System groups: 27

RUST PREVENTION AGENTS - Additives & agents - Anti-corrosion System groups: 27,28

COATINGS - Coatings & paint System groups: 443

TANKCOATING - Coatings & paint System groups: 27

PAINTS - Coatings & paint System groups: 443

TOPCOATS - Coatings & paint System groups: 27

373_470_LF_2016.indd 408 07.08.2016 11:47:10

409


KARMØY WINCH A/SBygnesveien 30, P.O. Box 160, 4291 Kopervk, NORWAY Telephone: +47 52 85 68 00. Telefax: +47 52 85 68 02 See index of Products and Services:

ANCHOR HANDLING SYSTEMS - Anchor, pipe & cable handling equipment System groups: 43

FISH PUMPS - Fishing and hunting equipment - Pumps & pump units System groups: 465

CAPSTANS - Capstans, bollards & hawse holes System groups: 43

NET HANDLING EQUIPMENT - Cranes, crane equipment, lifting devices & booms - Fishing and hunting equipment System groups: 463

CONTROL SYSTEMS - Control & automation systems System groups: 40,43

WINCHES - Winches, drums & reels System groups: 33,43

CRANES - Cranes, crane equipment, lifting devices & booms System groups: 33,45

WIRE ROPE STOPPERS - Chains, wires & ropes

DECK CRANES - Cranes, crane equipment, lifting devices & booms System groups: 33

WIRE ROPES - Chains, wires & ropes System groups: 43

KONGSBERG EVOTECMyrvåg, 6080 Gurskøy, NORWAY Telephone: +47-94 94 10 00 See index of Products and Services:

BULK HOSE SECURING UNITS - Hoses, drums, packings & fittings System groups: 196

SEISMIC PRODUCTS - Subsea & seismic equipment System groups: 196

DECK EXTENDERS - Sections, foundations, pillars, structural units and bulkheads System groups: 48

STREAMER HANDLING SYSTEMS - Anchor, pipe & cable handling equipment System groups: 48

OIL RECOVERY HANDLING SYSTEMS - Boilers, burners and incinerators System groups: 481

373_470_LF_2016.indd 409 07.08.2016 11:47:10


410

KONGSBERG MARITIME AS

Company reg.no: 979750730 Kirkegårdsveien 45, P.O. Box 483, 3601 Kongsberg, NORWAY Telephone: +47 32 28 50 00. Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Business activities: We deliver systems for dynamic positioning and navigation, marine automation, safety management, cargo handling, subsea survey and construction, maritime simulation and training, and satellite positioning. Our solutions enhance efficiency and safety throughout the whole maritime technology spectrum and we offer additional competence in providing turnkey engineering services within the shipbuilding and floating production sectors. Market sector: Key markets are countries with large offshore, shipyard and energy exploration & production industries. In exploration we provide sophisticated underwater and positioning technology and systems for survey vessel operation. In field development, we support construction and offshore vessels with innovative solutions for operation and specialist applications whilst in production our hardware and software enhances output and minimises downtime. For maritime transport and offshore vessels, we supply The Full Picture, including navigation, automation, training and safety systems.

373_470_LF_2016.indd 410 07.08.2016 11:47:10

411



BRIDGE SYSTEMS - Control & automation systems System groups: 42,791,875

SENSORS - Sensors, gauges & detectors

CAMERA SYSTEMS - Subsea & seismic equipment System groups: 414,481

SIMULATORS - Control & automation systems System groups: 109

DECK SYSTEMS - Cranes, crane equipment, lifting devices & booms System groups: 3,32

TANK GAUGING AND MEASUREMENTS - Cargo handling equipment System groups: 3

ENGINE ROOM SYSTEMS - Control & automation systems System groups: 79,791

TRANSMITTERS - Sensors, gauges & detectors

NAVAL SYSTEMS - Control & automation systems System groups: 41

UNDERWATER VEHICLES - AUV - Subsea & seismic equipment System groups: 414

SAFETY SYSTEMS - Control & automation systems System groups: 375


BRAZIL CANADA CHINA GERMANY GREECE INDIA ITALY KOREA, SOUTH MEXICO

NETHERLANDS, THE POLAND RUSSIA SINGAPORE SPAIN UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES

373_470_LF_2016.indd 411 07.08.2016 11:47:10


412

KONGSBERG SEATEX ASCompany reg.no: 982786185 Pirsenteret , 7462 Trondheim, NORWAY Telephone: +47 73 54 55 00. Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex Global source for marine and offshore electronics KONGSBERG SEATEX is a marine electronics manufacturer with products for precision positioning and motion sensing. Our commitment is to provide quality products and solutions for safe navigation and operations at sea. We provide innovative and reliable precision positioning and motion sensing systems. As part of Kongsberg Maritime we can provide complete ship and offshore systems. KONGSBERG SEATEX provides the following range of products: Attitude Determination Systems - Motion Reference Units - Helideck Monitoring Systems - High-end solutions for precision positioning Surface Positioning Reference Systems - Relative positioning - Absolute positioning - High end GPS/Glonass solutions Automatic Identification Systems - AIS Infrastructure for coastal surveillance - AIS Mobile Stations for onboard use Global Navigation Satellite Systems - Project oriented development of today’s and future navigation systems See index of Products and Services:


NAVIGATION / POSITIONING SYSTEMS - Positioning & navigation equipment

COMMUNICATION - Radio & telephone communication System groups: 412,42,421,423

REFERENCE SYSTEMS - Control & automation systems - Positioning & navigation equipment System groups: 43

GPS / GLONASS - Positioning & navigation equipment System groups: 412

SENSORS - Sensors, gauges & detectors System groups: 60

HELICOPTER DECK, EQUIPMENT - Helicopter deck equipment System groups: 566

373_470_LF_2016.indd 412 07.08.2016 11:47:10

413


KROHNE MARINEStromtangveien 21, 3950 Breivik, NORWAY Telephone: +47 35 56 12 20. Telefax: +47 35 56 12 21 See index of Products and Services:

FLOWMETERS - Meters & indicators System groups: 3

TANK ALARM SYSTEMS - Alarm equipment System groups: 381

MONITORING OF BUNKERING - Monitoring equipment System groups: 192

TANK MONITORING SYSTEMS - Monitoring equipment System groups: 192,35,38

MONITORING OF FUEL CONSUMPTION - Monitoring equipment System groups: 192

KUMERA ASCompany reg.no: 910374354 Gneisveien 11, P.O. Box 2043, 3202 Sandefjord, NORWAY Telephone: +47-33 48 54 54 See index of Products and Services:

FIRE FIGHTING EQUIPMENT - Firefighting equipment

TRANSMISSION EQUIPMENT - Brakes, couplings & shafts - Gears System groups: 601,651

GEARBOXES - Gears System groups: 637,638

TRANSMISSIONS - Brakes, couplings & shafts - Gears System groups: 601,651

MARINE GEARS - Gears System groups: 637,638

373_470_LF_2016.indd 413 07.08.2016 11:47:10


414

KYMA ASCompany reg.no: 974416549 Åsamyrane 88B, 5116 Ulset Bergen, NORWAY Telephone: +47-55 53 00 14. Telefax: +47-55 53 00 17 See index of Products and Services:

COMPUTER SYSTEMS - Computer hardware - Onboard software System groups: 542

PERFORMANCE TESTING - Inspection and testing (NDT, pressure, performance, trial trip, etc) System groups: 793

CONDITION MONITORING SYSTEMS - Monitoring equipment

SHAFT-TORQUE-METERS - Meters & indicators System groups: 793

FUEL ECONOMIZING SYSTEMS - Other engine & propulsion equipment - Purification plants & fluid treatment

373_470_LF_2016.indd 414 07.08.2016 11:47:10

415


L-3 COMMUNICATIONS VALMARINE ASCompany reg.no: 977040329 Buskerudveien 129, P.O. Box 881, 3007 Drammen, NORWAY Telephone: +47 32 21 81 00. Telefax: +47 32 21 17 87 See index of Products and Services:

AUTOMATION EQUIPMENT - Control & automation systems System groups: 79

NAVIGATION SYSTEMS - Positioning & navigation equipment System groups: 41

BRIDGE CONTROL SYSTEMS - Bridge inventory & equipment System groups: 419

PLATFORM MANAGEMENT SYSTEM - Control & automation systems System groups: 1

MONITORING EQUIPMENT - Monitoring equipment System groups: 381,79

SAFETY MANAGEMENT SYSTEMS - Administration, broking, finance & insurance services

373_470_LF_2016.indd 415 07.08.2016 11:47:10


416

LIBRA-PLAST AS

Company reg.no: 950603739 Raffelneset 12, 6060 Hareid., NORWAY Telephone: +47-70 09 54 00. Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Established: 1954 Through innovative products, Libra has remained an important supplier to the world`s maritime industry during the last 60 years. Ship doors are Libra`s primary focus area and the company is a world leader in this sector. Libra supply all types of vessels with a complete range of IMO-compliant, hinged, external and internal bulkhead doors made of steel, aluminum, stainless steel or composite materials. All doors are visualized by 3D models and drawings. A complete set of accurate drawings accompanies all quotes and supplies. Libra also produce safe storage cabinets and containers for emergency and rescue equipment. Our cabinets can also be supplied with EX heating and/or EX lighting on request for your offshore ship or rig installation. GRP cabinets and containers has the advantage of lightweight, long service life and low maintenance. Libra supply products worldwide and we have agents on all continents working for us closer to your time zone. Please visit our internet site for more information about your closest contact point. Or contact our head office directly in case you have any questions.

373_470_LF_2016.indd 416 07.08.2016 11:47:10

417



BATTERY BOXES - Bins, baskets, boxes and containers System groups: 866

DOORS, WATERTIGHT - Watertight/weathertight doors & windows System groups: 513,514

CABINETS FOR EQUIPMENT - Bins, baskets, boxes and containers System groups: 48

DOORS, WEATHERTIGHT - Watertight/weathertight doors & windows System groups: 514

CONTAINERS - Bins, baskets, boxes and containers System groups: 315

EQUIPMENT CABINETS - Furniture & cabinets

DOORS - Interior doors & windows - Watertight/weathertight doors & windows System groups: 51

HATCHES - Hatches, covers, ports, ramps & platforms System groups: 30

DOORS, LIGHTWEIGHT - Watertight/weathertight doors & windows System groups: 513,514

INSTRUMENT CONSOLES - Centrals, consoles & panels

DOORS, SPRAYTIGHT - Watertight/weathertight doors & windows System groups: 513,514

LIFE JACKET CONTAINERS - Bins, baskets, boxes and containers - Lifesaving equipment System groups: 503


AUSTRALIA CHINA CROATIA DENMARK FINLANDFRANCE GREECE HONG KONG ITALY JAPAN

KOREA, SOUTH NETHERLANDS, THE NEW ZEALAND PORTUGAL SINGAPORE SPAIN TURKEY UNITED KINGDOM VIETNAM

373_470_LF_2016.indd 417 07.08.2016 11:47:10


418

LIGHT STRUCTURES ASNils Hansens vei 2, 0667 Oslo, NORWAY Telephone: +47 23 89 71 33 See index of Products and Services:

MONITORING SYSTEMS - Monitoring equipment

LILAAS AS

Company reg.no: 997346912 Kongeveien 75, P.O. Box 705, 3196 Horten, NORWAY Telephone: +47-33 03 18 50. Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no Lilaas AS is one the world’s leading manufacturers of maritime control levers, joysticks and wheels. Fishing boats and ferries, supply vessels, large tankers, cruise ships and cranes are manoeuvred by control levers from Lilaas. Lilaas has 50 years in business. The governing idea has always been quality. Traditions are important, but the company is in a constant stage of transition, as its customers are. Control units are the major contributor to Lilaas’ turnover. The range includes products from simple to very complex, from one-axis control levers, hand wheels and rudder controls, to azimuth control units and multi-axis joysticks. All units may be delivered motorised on all axes and with several optional features. Most models are certified by Det Norske Veritas (DNV). The Azimuth Electronic Shaft System (AESS), developed by Lilaas and known for its reliability, is used in a wide range of applications. Master and slave control levers are connected for simultaneous operation. Unique design, top-grade materials and thorough testing give products of high quality that require a minimum of service and maintenance. In addition to a broad standard assortment of control levers, Lilaas offer specialised solutions designed to customer specifications. The company has experienced excellent working co-operation between customers, professional industrial designers and its own engineers. Accordingly, we are releasing a new generation control levers. A new look and a new technology will be available in 2011. Lilaas has received a handful award of design excellence, national and international. It’s several times awarded Norwegian Design Council’s award for Design Excellence, and once the Red Dot award from the international Red dot institute for advanced design studies. The company has recruited a staff of skilled operators and engineers and created state-of-the-art equipped departments for mechanical production and manual assembly. It cooperate with

373_470_LF_2016.indd 418 07.08.2016 11:47:10

419


demanding customers, such as Rolls-Royce Marine, Kongsberg Maritime, Berg Propulsion, Wärtsilä and other suppliers and shipbuilders in maritime and offshore related industry. Lilaas also supply medicine, defense, space/satellite related industries with precision mechanics. Modern machinery and skilled staff makes the company capable to cope with stringent grades of tolerance, a characteristic force of its production. The machine department produces small and medium sized details in a range of materials, such as stainless/acid-proof steel, titan, inconel 718, covar, hasteloy, brass, aluminum and various plastic materials. The Lilaas factory uses CNC-controlled machine tools with integrated CAD/CAM, and design and production uses technology such as Pro/Engineer and EdgeCam. See index of Products and Services:

CONTROL LEVERS - Regulators & switches System groups: 791

PRECISION MECHANICS - Other construction assistance (cleaning, rigging, stores, support)

JOYSTICK - Control & automation systems System groups: 403,63,791

MACGREGOR PUSNES ASCompany reg.no: 951925357 Skilsøveien 368 Pusnes, 4818 Færvik, NORWAY Telephone: +47 37 08 73 00. Telefax: +47 37 08 61 21 See index of Products and Services:

BOW LOADING SYSTEMS (BLS) - Cargo handling equipment

STEERING GEARS - Steering equipment & stabilizers System groups: 40,403,637

DECK MACHINERY - Cranes, crane equipment, lifting devices & booms - Winches, drums & reels System groups: 274

STERN OFFLOADING SYSTEMS - Cargo handling equipment

MOORING EQUIPMENT - Capstans, bollards & hawse holes - Winches, drums & reels System groups: 43

WINDLASSES - Capstans, bollards & hawse holes System groups: 432,433

373_470_LF_2016.indd 419 07.08.2016 11:47:10


420

MARINE ALUMINIUM A.S

Company reg.no: 988419486 Husøyvn. 165, P.O. Box 134, 4299 Avaldsnes, NORWAY Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Company brochures and datasheets are available on the Internet. Established 1953 Marine Aluminium AS (MA) is one of the world’s leading companies within engineering, design and fabrication of aluminium structures and products for the offshore and shipbuilding industry. MA has more than 60 years experience working with aluminium, with particular competence in the fields of material technology, extrusion tooling and welding techniques. The site includes spacious indoor facilities, as well as a large quay capable of load out of structures in excess of 1000 MT and mooring up to three rigs simultaneously. The firm has an extensive production of aluminium-constructions such as: - Helicopter decks - Accommodation ladders with davits - Wheelhouses and other superstructures - Aluminium boats - Friction stir welded panels - Extruded aluminium profiles - Engineering - Finishing and welding - Aluminium structures The firms main products offshore is helicopter decks, telescopic personnel bridges and customer specified structures

373_470_LF_2016.indd 420 07.08.2016 11:47:10

421



ACCOMMODATION LADDERS - Ladders, railings, stairs, ramps & gangways System groups: 564

HVAC - Accommodation work (including carpentry, HVAC) System groups: 51,54,541,57,583

DROPPED OBJECT PROTECTION - Aluminium

OFFSHORE MODULES - Accommodation modules

FLEXIBARRIER - Cargo handling equipment

RAILING SYSTEMS - Ladders, railings, stairs, ramps & gangways System groups: 533

GANGWAYS - Ladders, railings, stairs, ramps & gangways System groups: 564

STAIRWAYS - Ladders, railings, stairs, ramps & gangways System groups: 52

HELICOPTER DECKS - Helicopter deck equipment System groups: 566

WALL PANELS - Interior floor, wall & ceiling covers System groups: 511,524

373_470_LF_2016.indd 421 07.08.2016 11:47:10


422

MARITIME PARTNER AS

Company reg.no: 970949763 Breivika Industriveg 65, P.O. Box 8193 Spjelkavik, 6022 Ålesund, NORWAY Telephone: +47-70 17 15 65. Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. Established: 1994 Supplier of Mob boats, rescue boats, work boats in MP, Seabear, Alusafe and Weedo design. Body sizes 5 - 25 metre. Repairs, upgrading of Mob/-work and rescue boats. Stand-By Rescue equipment After-Sales Service Follow up of delivered boats takes first priority at Maritime Partner. All Alusafe, Seabear, Springer and Weedo boats delivered are supported from one OEM (Original Equipment Manufacturer) - Maritime Partner. MacGregor Breivassvegen 105 P.O. Box 64 NO-5363 Ågotnes Telephone: +47 56 31 33 00 - Telefax: +47 56 31 33 23 Contact person: Bjørnar Andersen www.macgregor-group.com Maritronic & Kristiansand Båtservice A/S Bråvannskleiva 10 P.O. Box 7033 NO-4674 Kristiansand Telephone: +47 913 68 300 Email: [email protected] www.maritronic.no See index of Products and Services:

ALUMINIUM BOATS - Lifeboats/rafts & other boats System groups: 443,501

MOB BOATS - Lifeboats/rafts & other boats System groups: 501

DAVITS - Davits and masts System groups: 501,502

RESCUE BOATS - Lifeboats/rafts & other boats System groups: 501

LIFE-SAVING EQUIPMENT - Lifesaving equipment System groups: 50

SAFETY EQUIPMENT - Safety equipment System groups: 503

373_470_LF_2016.indd 422 07.08.2016 11:47:10

423

DIRECTORY OF SUPPLIERS The Supplier is represented in the following countries:

ARGENTINA AUSTRALIA BRAZIL CHINA FINLAND FRANCE GREECE ICELAND

INDIA JAPAN KOREA, SOUTH KUWAIT SINGAPORE SPAIN UNITED STATES

MARITIME PROTECTION ASCompany reg.no: 894 038 322 Bosmyrkollen 2, 4620 Kristiansand, NORWAY Telephone: +47 908 15 987. Telefax: +47 38 01 10 25 See index of Products and Services:

INERT GAS SYSTEMS - Inert gas components, CO2 System groups: 376,819

MAS FLUID CONTROL ASEivind Lychesvei 19A, P.O. Box 336, 1301 Sandvika, NORWAY Telephone: +47 67 80 71 20. Telefax: +47 67 80 71 21 See index of Products and Services:

ALARM SYSTEMS - Alarm equipment System groups: 792

ENGINEERING - Engineering services

AUTOMATION - Control & automation systems System groups: 79

373_470_LF_2016.indd 423 07.08.2016 11:47:10


424

MASTO WIRE SERVICE A/SCompany reg.no: 929942787 Nye Tegelverksvei 7B, P.O. Box 1615 Lundsiden, 4688 Kristiansand S, NORWAY Telephone: +47 38 09 70 50. Telefax: +47 38 09 70 53 e-mail: [email protected] Internet: www.masto.no HIGH PRESSURE WIRE ROPE LUBRICATORS Distribution for the world-wide shipping marked: Wilhelmsen Ships Service (Unitor) together with Masto Wire Service A.S. WIRE ROPE LUBRICATORS (high-pressure). For the shipping, offshore and industrial market. World-wide export Representative for UK: BRIDON INTERNATIONAL - CERTEX UK, Doncaster Tel.:+302/382496. Telefax: +302/382263 See index of Products and Services:

WIRE ROPE LUBRICATORS, HIGH PRESSURE - Lubricants System groups: 3,4


AUSTRALIA CANADA GERMANY INDIA INDONESIA ITALY

SINGAPORE SPAIN SWEDEN UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES

MATRE MASKIN AS

Company reg.no: 936279198 5420 Rubbestadneset, NORWAY Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no Company brochures and datasheets are available on the Internet. Sales: [email protected] Spareparts: [email protected] Technical support: [email protected]

373_470_LF_2016.indd 424 07.08.2016 11:47:10

425

DIRECTORY OF SUPPLIERS Matre is a well renowned provider of products, systems and services for the global maritime and offshore industry, focusing on firefighting solutions, calibrating equipment, pumps and machining services. Throughout the company’s 60 year long history we have placed great emphasis on quality, product development, flexible and reliable solutions, and designs that are tailor-made for each customer or project. This has resulted in a steady rate of innovations within our different product ranges. In Matre, high quality is our brand. Strict programs for testing and control, guided by a ISO 9001 certified quality assurance system, ensures that every delivery meets the current safety regulations, project specifications and the customers’ requirements. Selling our products to customers who place extremely high demands on accuracy and materials, we need to have the highest levels of expertise and the very best equipment. And we’re proud to say: We have both! Our highly dedicated professionals comprise engineering, mechanical and machine operation expertise, and many of our employees have years of invaluable experience. Matre was founded in 1953, in Bømlo at the west coast of Norway. Here, at the very heart of a major maritime cluster, with roots dating all the way back to the Viking era, the company has grown and evolved steadily. MATRE Firefighting Services: Matre provides a worldwide Field Service, comprising commissioning of new fire fighting equipment on board rigs and vessels, general maintenance of Matre equipment, annual inspections of DIFFS, maintenance of major deluges, as well as retrofits, conversions and modifications of existing helideck systems.In addition we also offer in-house repairs and services of Matre firefighting equipment at our facility in Bømlo. See index of Products and Services:

CALIBRATION EQUIPMENT - Meters & indicators - Workshop equipment System groups: 442

MACHINING SERVICE - Engineering services System groups: 6

FIRE FIGHTING SYSTEMS DIFFS / NUI - Firefighting equipment System groups: 819

NOZZLES - Fluid nozzles & mixing batteries System groups: 721

FIRE-FIGHTING EQUIPMENT PROPORTIONERS - Firefighting equipment System groups: 505


373_470_LF_2016.indd 425 07.08.2016 11:47:10


426

MEDI 3 MARINE AS

Company reg.no: 941455077 Sundgata 12, 6003 Ålesund, P.O. Box 1514, 6025 Ålesund, NORWAY Telephone: +47-70 11 70 00. Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Company brochures and datasheets are available on the Internet. Medical Safety at Sea THE SHIPMED CONCEPT - ACCORDING TO MLC 2006 The ShipMed Concept takes care of the medical safety on board, provides quality assurance of the operation of the ship’s hospital and increases the safety for those on board. The ShipMed Concept substantiates MLC 2006 which aimes to: “ensure that seafarers are given health protection and medical care as comparable as possible to that which is generally available to workers ashore, including prompt access to the neccessary medicines, medical equipment and facilities for diagnosis and treatment and to medical information and expertise”. Medi 3 ShipMed has developed innovative and functional hospital solutions to make sure the crew on board are taken as good care of as possible. Medi 3 ShipMed provides project planning, equipment and a safety system for managing the hospital on board.

373_470_LF_2016.indd 426 07.08.2016 11:47:10

427



EMERGENCY MEDICINE CARE - Hospital & medical equipment

MEDICINE CABINETS - Furniture & cabinets - Hospital & medical equipment

FIRST AID EQUIPMENT - Hospital & medical equipment

SHIP’S HEALTH SERVICE - Hospital & medical equipment

HEART STARTERS - Hospital & medical equipment

SHIP’S HOSPITALS - Hospital & medical equipment

MEDICAL EQUIPMENT - Hospital & medical equipment System groups: 504

SHIP’S MEDICINE - Hospital & medical equipment

MEDICAL EQUIPMENT, EMERGENCY - Hospital & medical equipment System groups: 504

373_470_LF_2016.indd 427 07.08.2016 11:47:11


428

MESON ASCompany reg.no: 984707592 Narverødveien 40, 3113 Tønsberg, NORWAY Telephone: +47 33 32 49 00. Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. Manager: Malvin Hansen Meson together with its subsidiaries are one of the leading suppliers of marine valves and fittings in Europe. We deliver valves & fittings to customers world wide. Our foundries and workshops produce the quality brands MAB and MJ. Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. Since the start the Meson group have had an expansive and solid growth. Thank you for giving us the responsibility to handle your need for valves! If you are not already our customer, please contact us when you consider your next order. See index of Products and Services:

ACTUATORS - Pneumatic actuators System groups: 601,651,79

CHECK VALVES - Air & gas valves - Fluid valves & other armatures System groups: 309,513

ANSI VALVES - Air & gas valves - Fluid valves & other armatures System groups: 35

CONTROL VALVES - Air & gas valves - Fluid valves & other armatures System groups: 442,6,7

BALL VALVES - Fluid valves & other armatures System groups: 6,7

DIAPHRAGM VALVES - Air & gas valves - Fluid valves & other armatures


FIRE VALVES - Air & gas valves - Firefighting equipment System groups: 57

373_470_LF_2016.indd 428 07.08.2016 11:47:11

429


GATE VALVES - Air & gas valves - Fluid valves & other armatures System groups: 513

SELFCLOSING VALVES - Air & gas valves - Fluid valves & other armatures

JIS VALVES - Air & gas valves - Fluid valves & other armatures

STEAM TRAPS - Evaporators, condensers and receivers System groups: 64

KNIFE GATE VALVES - Air & gas valves - Fluid valves & other armatures System groups: 72

STOP VALVES - Air & gas valves - Fluid valves & other armatures

MUDBOXES - Bins, baskets, boxes and containers

STRAINERS - Fluid filters

NEEDLE VALVES - Air & gas valves - Fluid valves & other armatures

VACUUM VALVES - Air & gas valves

SAFETY VALVES - Air & gas valves - Fluid valves & other armatures System groups: 73,75

VALVES - Air & gas valves - Fluid valves & other armatures System groups: 3,6,7

The Supplier is represented in the following countries: SWEDEN

373_470_LF_2016.indd 429 07.08.2016 11:47:11


430

METIZOFT ASCompany reg.no: 990346755 Eggesbøvegen 40, P.O. Box 104, 6099 Fosnavåg, NORWAY Telephone: +47 41 77 77 55 See index of Products and Services:

COMPLETION - Certification, QA and verification services - Documentation & data management System groups: 112

MED - MARINE EQUIPMENT DIRECTIVE - Certification, QA and verification services - Documentation & data management System groups: 112

GREEN PASSPORTS - Certification, QA and verification services - Documentation & data management System groups: 112

SENIOR MARINE ADVISERS - Administration, broking, finance & insurance services - Basic design & project development services - Certification, QA and verification services - Documentation & data management - Engineering services - Project management, construction management System groups: 112

IHM - INVENTORY OF HAZARDOUS MATERIALS - Certification, QA and verification services - Documentation & data management System groups: 112

373_470_LF_2016.indd 430 07.08.2016 11:47:11

431


MIROS ASCompany reg.no: 935450365 Solbraveien 20, Postboks 364, 1372 Asker, NORWAY Telephone: +47-66 98 75 00. Telefax: +47-66 90 41 70 See index of Products and Services:

OCEANOGRAPHICAL SYSTEMS - Subsea & seismic equipment System groups: 276

WAVE MONITORING SYSTEMS - Monitoring equipment System groups: 791

OIL SPILL DETECTIONS - Anti-pollution equipment - Detection & identification equipment System groups: 382

MODELL MØBLER ASCompany reg.no: 981931440 Skibåsen 7, 4635 Kristiansand, NORWAY Telephone: +47 38 12 79 90. Telefax: +47 38 12 79 99 See index of Products and Services:

FURNITURES - Furniture & cabinets System groups: 541

SEATS - Furniture & cabinets

NAVTOR ASStrandgaten 18, 4370 Egersund, NORWAY Telephone: +47 51 49 22 00. Telefax: +47 51 49 22 01 See index of Products and Services:

ELECTRONIC CHARTS - Positioning & navigation equipment System groups: 41

WEATHER PREDITION EQUIPMENT - Other nautical equipment System groups: 417

373_470_LF_2016.indd 431 07.08.2016 11:47:11


432

NORAC A/SCompany reg.no: 979376626 Stoaveien 16, P.O. Box 1593 Stoa, 4857 Arendal, NORWAY Telephone: +47-37 05 92 50. Telefax: +47-37 05 92 51 See index of Products and Services:

ACCOMMODATION SYSTEMS - Accommodation modules System groups: 51

FLOATING FLOORS - Vibration absorbers & dampeners

CEILINGS - Interior floor, wall & ceiling covers System groups: 511



SHIPS’ WINDOWS - Interior doors & windows - Watertight/weathertight doors & windows System groups: 515

DOORS, WEATHERTIGHT - Watertight/weathertight doors & windows System groups: 514

WALLS - Interior floor, wall & ceiling covers System groups: 511

FIRE RATED WINDOWS - Fire protection & detection equipment - Watertight/weathertight doors & windows System groups: 515

WET UNITS - Accommodation modules System groups: 583

NORSAFE AS

Company reg.no: 940411696 P.O. Box 115, 4852 Faervik, NORWAY Telephone: +47-37 05 85 00. Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. Norsafe develops, manufactures and supplies marine lifesaving systems for all types of ships and offshore installations and for military and professional use. As experts in the business of safety at sea, Norsafe has produced over 27 000 lifeboats since 1903. Norsafe’s worldwide involvement includes production, sales, delivery and service of lifesaving equipment. Norsafe headquarters is situated in Arendal, Norway. Production facilities, sales and service companies are located in Norway, China, Greece, Mexico, Singapore, South Korea, Australia, the USA, Japan, Brazil, the Netherlands and the United Arab Emirates, supporting our worldwide customers. The Norsafe Group counts 1100 employees and is fast expanding.

373_470_LF_2016.indd 432 07.08.2016 11:47:11

433


Norsafe offers 24/7 service for Life Saving Appliances through an international service network comprising 45 authorised service partners spread across all continents (phone: +47 37 05 63 33). Norsafe Academy offers operational and maintenance courses and training, STCW95/OLF & OPITO. For further information, visit our website: norsafe.com and youtube.com/norsafeas World-leading manufacturer of: . Free-fall lifeboats . Conventional lifeboats . Fast rescue boats . Daughter craft . Work boats . Professional boats . Military boats . Davit systems World-leading provider of: . New lifesaving equipment . Commissioning . Technical support . 24/7 service (phone: +47 35 05 63 33) . Mandatory annual and 5 yearly inspections . Fleet Service Agreements (FSA) . Spare parts . Upgrades/refits according to latest regulations . Re-hooking . Training through Norsafe Academy, STCW95/OLF & OPITO . Return and recycling of outdated lifeboat systems NORSAFE’s DAUGHTER COMPANIES: Norsafe AS Tybakken 90, N-4852 Faervik NORWAY Tel: +47 37 05 63 33 - Fax: +47 37 06 27 51 [email protected] Norsafe Australia Pty Ltd. 1 / 4 Monash Gate, Jandakot 6164 WESTERN AUSTALIA Tel: +61 8 9414 7477 - Fax: +61 8 9414 7488 Norsafe Årsnes AS Årsnes Industriområde, N-5474 Rosendal NORWAY Tel: +47 37 05 63 74 - Fax: +47 53 48 91 51 [email protected]

373_470_LF_2016.indd 433 07.08.2016 11:47:11


434

Norsafe BV Visiting: Brielslaan 69, Harbour 1357, Rotterdam THE NETHERLANDS Tel: +31 010 484 37 48 - Fax: +31 010 423 01 36 [email protected] Norsafe Japan Ltd. 11-5 Higashisakura-machi, Fukuyama-city, Hiroshima 720-0065 Japan JAPAN Tel: +81 84 982 5300 - Fax: +81 84 982 5301 [email protected] Norsafe Korea Co., Ltd. # 432-16, Songjeong-Li, Yeoncho-Myeon, Geoje-City, Kyungnam Province KOREA Tel: +82 55 633 1903 - Fax: +82 55 632 1904 [email protected] Jiangyin Norsafe F.R.P. Co. Ltd. Beihuan Road 29, Yuecheng Town, Jiangyin City, Jiangsu Province, 214404 CHINA Tel: +86 510 8698 6788 - Fax: +86 510 8698 7371 [email protected] Norsafe Singapore Pte Ltd. 40 Gul Crescent SINGAPORE Tel: +65 6515 0030 - Fax: +65 6872 0864 [email protected] Norsafe Watercraft Hellas S.A. 7th Klm Old National Road, Thebes - Beotia GREECE Tel: +30 22620 22441 - Fax: +30 22620 29075 [email protected] Lifeboat Service de Mexico Calle 50 N° 5 Col. Miami CP 24155 Cd. Del Carmen, Camp. México Tel: +52 938 384 2017 Tel: +52 938 111 1233 [email protected] [email protected]

373_470_LF_2016.indd 434 07.08.2016 11:47:11

435


Norsafe Marine & Offshore 1301 Edwards Avenue, Suite B, Jefferson LA 70123 USA Tel: +1 504 733 0100 - Fax: +1 504 733 0155 [email protected] Norsafe UK Aberdeen Business Centre Bon Accord Crescent, Aberdeen AB11 6DE Tele +44 (0) 1224 502580 [email protected] Norsafe Brazil Rua José Cardoso da Silva, No. 300, Centro, Zip code: 28.800-000, Rio Bonito, RJ - Brasil. Tel: + 55 21 2734 3322 [email protected] See index of Products and Services:

DAUGHTER CRAFTS - Lifeboats/rafts & other boats System groups: 501

LIFEBOATS - Lifeboats/rafts & other boats System groups: 501


MILITARY & PROFESSIONAL - Lifeboats/rafts & other boats System groups: 501

FREE FALL LIFEBOATS - Lifeboats/rafts & other boats System groups: 501

RESCUE BOATS - Lifeboats/rafts & other boats System groups: 501

HOOK SYSTEMS - Safety equipment System groups: 503

WORKBOATS - Lifeboats/rafts & other boats System groups: 501

373_470_LF_2016.indd 435 07.08.2016 11:47:11


436


ARGENTINA AUSTRALIA BRAZIL CROATIA CYPRUS EGYPT FRANCE GERMANY GREECE INDIA IRAN ITALY KOREA, SOUTH MALAYSIA

NETHERLANDS, THE NEW CALEDONIA NIGERIA PORTUGAL QATAR RUSSIA SOUTH AFRICA SPAIN SWEDEN TURKEY UNITED STATES VENEZUELA VIETNAM

NORSAP ASCompany reg.no: 919405619 Mjåvannsveien 45/47, 4628 Kristiansand, NORWAY Telephone: +47-38 18 52 00 See index of Products and Services:

PILOT CHAIRS - Bridge inventory & equipment System groups: 542

373_470_LF_2016.indd 436 07.08.2016 11:47:11

437


NYBORG A/SCompany reg.no: 952783297 Haugsetveien 72, 6230 Sykkylven, NORWAY Telephone: +47-70 25 40 80. Telefax: +47-70 25 29 08 See index of Products and Services:

AXIAL FANS - Fans System groups: 57

GAS FREEING FANS - Fans System groups: 57

CENTRIFUGAL FANS - Fans System groups: 57

MIST ELIMINATOR LOUVERS - Fans System groups: 57

DAMPERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 109,33,40

SILENCERS - Exhaust components & silencers System groups: 743,744

DECK MOUNTING FANS - Fans System groups: 57

VENTILATION COWLS - AC units, air dryers, air cooling and heating components System groups: 316

FANS - Fans System groups: 57

VENTILATION EQUIPMENT - AC units, air dryers, air cooling and heating components System groups: 37,57

FANS, EXPLOSION PROOF - Fans System groups: 897

373_470_LF_2016.indd 437 07.08.2016 11:47:11


438

OPTIMARIN AS

Company reg.no: 970942327 Sjøveien 34, 4315 Sandnes, NORWAY Telephone: +47 51 11 45 33. Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com Company brochures and datasheets are available on the Internet. Optimarin AS was founded in 1994 in Stavanger, a town along the west coast of Norway and we were one of the first companies in the world to develop a system for environmentally friendly purification of ballast water. Although we recognized that there were various methods for purifying ballast water, both chemical and environmentally friendly methods, we chose to pursue a solution that does not use any chemicals and leaves no residual products that are harmful to the ocean or the environment. In the year of 2000 we were honored by installing the world’s first ballast water treatment system on board the cruise ship Regal Princess. After several years of testing, developing and patenting new technology, we finally obtained type approval for the Optimarin Ballast System in 2009, in accordance with Guideline 8 and the ‘International Convention for the Control and Management of Ships’ Ballast Water and Sediments, 2004’. The Optimarin Ballast System (OBS) uses approved technology that significantly exceeds the stringent requirements set out in the IMO Convention. But for Optimarin, it is not enough to simply be approved. We operate in accordance with ISO 9001 / 2008 and our vision is to have the most environmentally friendly ballast water purification system in the world. See index of Products and Services:

BALLAST SYSTEMS - Purification plants & fluid treatment System groups: 801

FILTERS - Fluid filters System groups: 584,6

CONTROL SYSTEM - Control & automation systems

UV SYSTEM - Purification plants & fluid treatment System groups: 801


ARGENTINA BRAZIL CHINA CROATIA CYPRUS DENMARK GREECE INDIA ISRAEL ITALY

KOREA, SOUTH NETHERLANDS, THE PORTUGAL SINGAPORE SPAIN SWEDEN TAIWAN TURKEY UNITED STATES

373_470_LF_2016.indd 438 07.08.2016 11:47:11

439


OPTIMERA AS - MARINE DIV.Industrivegen 26, 6155 Ørsta, NORWAY Telephone: +47 47 64 80 00 See index of Products and Services:

CHIPBOARD - Other materials System groups: 27,28

PLYWOOD - Other materials System groups: 27

GYPSUM BOARD - Other materials System groups: 27,28

WALL PANELS - Interior floor, wall & ceiling covers System groups: 511,524

373_470_LF_2016.indd 439 07.08.2016 11:47:11


440

PALFINGER MARINE NORWAY AS

Company reg.no: 960256778 Hegrenesveien 17A, 5042 Bergen, NORWAY Telephone: +47 55 33 36 50. Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Company brochures and datasheets are available on the Internet. PALFINGER MARINE NORWAY AS is the global leading manufacturer of highly reliable, innovative and customised deck equipment and handling solutions for the maritime industries. LIFETIME EXCELLENCE is our promise. For PALFINGER MARINE NORWAY customers, this means excellence without compromise and reliable, economical solutions from a global network of skilled service partners - the entire product life cycle. See index of Products and Services:

CRANES - Cranes, crane equipment, lifting devices & booms System groups: 33,45

STIFF BOOM CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,32,33

ENGINE ROOM CRANES - Cranes, crane equipment, lifting devices & booms System groups: 4

TELESCOPIC BOOM CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,33

KNUCKLE BOOM CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,3

TRAVELLING CRANES - Cranes, crane equipment, lifting devices & booms System groups: 3,32

PROVISION CRANES - Cranes, crane equipment, lifting devices & booms System groups: 563

WIRE LUFFING LATTICE BOOM CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,3,33

PARAT HALVORSEN A-S

Company reg.no: 986908277 Tjørsvågstrand 27, P.O. Box 173, 4402 Flekkefjord, NORWAY Telephone: +47-99 48 55 00. Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. Steam and Heat solutions from a world class boiler manufacturer! Parat Halvorsen is an engineering and manufacturing company with strong roots. It was first established in 1842 and has been a significant supplier to the boiler industry ever since. With a total of close to 9.000 deliveries to the Marine, Offshore and industry markets since the beginning we have established a solid base of expertise. The factory and head office is situated in the city of Flekkefjord on the south coast of Norway, just two hours from the Offshore capital of Stavanger.

373_470_LF_2016.indd 440 07.08.2016 11:47:11

441


Today we still focus on tailor made steam and heat systems for both industrial and marine/offshore applications. We never compromise on quality and have a strong customer focus. For us there are no problems, only challenges and we take pride in being able provide solutions to all our customers demands, both great and small. We supply turn key solutions for most processes that require large amounts of heat input and our skilled and experienced engineering staff work hard to meet even the strictest requirements. We produce a vast range of steam and heat systems ranging from 100kW to 50.000kW output. To maintain our competitiveness we have established partnerships in Korea enabling us to be closer to the Asian shipyards and to keep our manufacturing and shipping costs as low as possible. Parat Halvorsen is once again strengthening the service and after sales department to be able to serve a growing demand for our expertise. By using an efficient team of skilled multidiscipline boiler technicians we have seen that we can perform complete modification or repair assignments very quickly and thereby save a great amount of costs for the vessel owner. Our teams are also fully certified to do sailing jobs around the world. On the product side we are working on various improvements of existing technology. We are also continuously developing customer optimized products to serve a changing market where the focus on lower emissions and improved fuel economy is becoming more and more important all over the globe. By focusing on maximum heat recovery from engines and generators and integrating electrical heaters in the exhaust gas boilers we are able to provide customized and fully optimized turnkey packages to any client who is focusing on long term benefits. For the offshore segment we are still delivering a great amount of heating systems for Oil Spill Response vessels. Our specialized Parat ORO system ensures that any recovered oil is kept sufficiently viscous during transport to shore offloading and processing (see enclosed whitepaper). For rigs and FPSO we provide complete turnkey packages for topside heating medium systems, tank heating systems and also for marine support systems like hot water service packages. Here we also focus strongly on sustainability and space optimization, ensuring that the end client gets the most cost efficient and stable operation possible utilizing the absolute minimum of space on deck or in the engine room areas. Parat Halvorsen prides itself in being a most innovative supplier of systems to any process that requires heat input. We constantly strive to find the most optimal solution to our customers demand, and have a special focus on sustainable and long lasting systems that give the end user the most cost efficient process. A typical example for a modern commercial vessel is to utilize as much of the waste energy as possible often in combination with integrated electrical heaters to ensure maximum redundancy and minimum fuel consumption. Main solutions: High Voltage Electrode Boiler, Low Voltage Electric Boiler, ORO Tank Heating, Oil Fired Smoke Tube Boiler, Exhaust Gas Water Tube Boiler, District Heating System, Waste-to-Energy, Economizer, Degasser, Feedwater Tank, Service, Maintenance, Worldwide, ASME, U-Stamp, S-Stamp, NOFO, Marine, Offshore, Industry, Oil Spill Response, Heat Exchangers, Boiler Repair Service, Retubing Certificates: ISO9001, DNV, Lloyds, ASME U-Stamp, ASME S-Stamp, CEN, ABS, Achilles etc.

373_470_LF_2016.indd 441 07.08.2016 11:47:11


442


BOILER REPAIRING - Machinery and piping work System groups: 64

HIGH VOLTAGE ELECTRODE BOILERS - Boilers, burners and incinerators System groups: 64

BOILERS - Boilers, burners and incinerators System groups: 64

HOT WATER BOILERS - Boilers, burners and incinerators System groups: 445,577,641,841

CENTRAL HEATING BOILERS - Boilers, burners and incinerators System groups: 577

MAIN BOILERS - Boilers, burners and incinerators System groups: 61

DONKEY BOILERS - Boilers, burners and incinerators System groups: 644

STEAM BOILERS - Boilers, burners and incinerators System groups: 64,641,644

ELECTRICAL CIRCULATION STEAM BOILERS - Boilers, burners and incinerators System groups: 577,641,841

STEAM GENERATORS - Heat exchangers & steam generation System groups: 64,649

ELECTRO BOILERS - Boilers, burners and incinerators System groups: 644

TANK HEATING SOLUTIONS - Tanks System groups: 641

EXHAUST BOILERS - Boilers, burners and incinerators System groups: 646

THERMAL OIL HEATERS - Heat exchangers & steam generation System groups: 648

FEEDWATERTANK / DEGASSER - Heat exchangers & steam generation System groups: 648

TOP FIRED WATER TUBE BOILERS - Boilers, burners and incinerators System groups: 64

HEAT RECOVERY UNITS - Heat exchangers & steam generation System groups: 74

VERTICAL PIN-TUBE BOILERS - Boilers, burners and incinerators System groups: 64


CHINA DENMARK FINLAND KOREA, SOUTH

SINGAPORE SPAIN TURKEY UNITED STATES

373_470_LF_2016.indd 442 07.08.2016 11:47:11

443


PG FLOW SOLUTIONS AS

Company reg.no: 932608103 Nye Vakås vei 28, P.O. Box 154, 1378 Nesbru, NORWAY Telephone: +47-66 77 56 00. Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Company brochures and datasheets are available on the Internet. Established: 1982 Representing: Henrich Behrens Pumpenfabrik, Bremen, Germany: Pumps Fritz Seeberger GmbH. & Co. (Seepex), Germany Speck-Pumpenfabrik, Roth, Germany Speck Pumpen, Hilpoltstein, Germany Speck Triplex Pumpen, Germany Sundstrand International Corporation S.A., Belgium Vatec Maschinenbau, Bremen, Germany KRAL-Screw Pumps, Lustenau, Austria Bornemann, Screw Pumps, Germany ABS Pumpenfabrik, Germany Sondex, Denmark Thyssen Maschinenbau GmbH. - “Ruhrpumpen”, Germany Shinko INd. Ltd., Japan Scanjet AS, Sweden and PG Construction AS, Drammen PG Hydraulics AS, Ålesund See index of Products and Services:

ACTUATORS - Hydraulic motors & actuators System groups: 601,898

CARGO SYSTEMS - Cargo handling equipment System groups: 3,32

AGITATORS - Pumps & pump units System groups: 3

COMPRESSORS - Compressors System groups: 73

BALLAST WATER TREATMENT SYSTEMS - Cleaning equipment System groups: 17

CRUDE CARGO SYSTEMS - Cargo handling equipment System groups: 3

CARGO PUMPS - Cargo handling equipment System groups: 3

DECK MACHINERY - Cranes, crane equipment, lifting devices & booms System groups: 274

373_470_LF_2016.indd 443 07.08.2016 11:47:11


444

DEEPWELL PUMPS - Pumps & pump units System groups: 3

MUD PUMPS - Pumps & pump units System groups: 481

ENGINE ROOM PUMPS - Pumps & pump units System groups: 6

PLATE HEAT EXCHANGERS - Heat exchangers & steam generation System groups: 36,7

FRESH WATER GENERATORS - Freshwater generation System groups: 761

PLATE HEAT EXCHANGERS - Heat exchangers & steam generation System groups: 36,577

FUEL CONSUMPTION MONITORING - Monitoring equipment System groups: 109


GAS CARGO PUMPS - Pumps & pump units System groups: 3

SUBSEA PUMPING SOLUTIONS - Subsea & seismic equipment System groups: 10

HIGH TEMP/HIGH VISCOCITY SYSTEMS - Control & automation systems System groups: 3,35

TANK CLEANING MACHINES - Tank cleaning equipment System groups: 382

HYDRAULIC POWER PACKS - Hydraulic plants & equipment System groups: 3

PLANY AS

Company reg.no: 918346651 Haugsbygda, 6082 Gursken, NORWAY Telephone: +47 70 02 68 20. Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no Company brochures and datasheets are available on the Internet. Established: 1964 Pla-Ny was established in 1964. Since that we have developed to become one of the leading actors in the field of canvas and tarpaulin products in Norway. Canvas and tarpaulin products for: - Shipyards - MOB boats - Aquaculture

373_470_LF_2016.indd 444 07.08.2016 11:47:11

445



CANVAS PRODUCTS - Scaffolds, jigs & tarpaulins etc. System groups: 316

TARPAULINS - Scaffolds, jigs & tarpaulins etc. System groups: 316

RESTECH NORWAY A/SCompany reg.no: 951274763 Olav V gt 112, P.O. Box 624, 8001 Bodø, NORWAY Telephone: +47-75 54 24 40 See index of Products and Services:

LINE THROWING APPARATUS - Lifesaving equipment System groups: 503


SAINT-GOBAIN WEBER

Company reg.no: 911781174 Brobekkvn. 84, P.O. Box 216 Alnabru, 0614 Oslo, NORWAY Telephone: +47-22 88 77 00. Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Company brochures and datasheets are available on the Internet. ACCREDITED WEBER MARINE FLOOR CONTRACTORS: Quality Assured application by Accredited Weber Marine Floor Contractors When proposing high quality products and solutions, it is always one subject which is very important in addition to the product itself - the installation. Weber Marine floors shall always be supplied in the exact quality as agreed and in terms of function, strength, durability, surface, flexibility and so on. This is the reason why our Marine Floor Products, Systems and Concepts are applied by Accredited Weber Marine Floor Contractors (AWMFC). Weber teach and train our contractors to perform an excellent quality to the clients’ satisfaction. The contractors are regularly re-certified by Weber to receive the latest information concerning developments of products and

373_470_LF_2016.indd 445 07.08.2016 11:47:11


446

concepts. For the end-user this means quality assured installation of Weber Marine Floors that is performed according to the Weber installation instructions. All stages in the Marine Flooring application are crucial for the final result. Therefore, we have introduced a quality assurance (QA) procedure to be followed by Weber and our Accredited Weber Marine Floor Contractors. The control consists of: . Quality Control of raw materials . Production control - ISO 9001/14001 . Quality Control of finished product . Product certificate . AWMFC consignment control . AWMFC Quality Control . Quality Assurance of finished floor Certified contractors by Weber are Accredited Weber Marine Floor Contractors (AWMFC) and perform all types of marine floor installations. Our contractors are: . Experienced, skilled and educated . Trained and approved by Weber . Theoretical and practical training . Independent local companies in close cooperation with Weber Training can be performed either in Weber’s own premises or at a feasible location selected by the contractor and can be arranged upon request. For new Weber Marine Floor Contractors Weber will, if requested, assist with technical support during the first installations of marine floors. WEBER - PUMPABLE SELF-LEVELLING MARINE FLOOR CREEDS AND FLOORING SYSTEMS Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor, Marine dB A-60 Floor and Marine dB-Floor. Weber was at the vanguard of developing pumpable, self-levelling floor screed products that offer the ability to create seamless high-performance floors at previously unachievable speeds. Present in 30 countries worldwide, 30 years’ experience has so far seen the company supply over one million m² of flooring. WEBER PREMIX RANGE - PUMPABLE FLOOR SCREEDS Weber marine flooring systems are built layer by layer to provide the optimum solution for each individual client’s requirement. Pumpable self-levelling floor screeds allow you to achieve the flattest, smoothest and thinnest floors possible, performing to exacting standards even in highly testing environments. They are pre-mixed at the manufacturing plant, and boast the following benefits:

373_470_LF_2016.indd 446 07.08.2016 11:47:11

447


- Factory blending ensures consistent quality - Machine mixing guarantees optimum consistency - Choice of delivery in bags, bulk or pump trucks - Pumpable form minimises down time and enhances ergonomics - Rapid drying time means floors are walkable after one to three hours - Up to 300m² to 500m² can be covered per hour - High strength / low thickness mix minimises loss of floor to ceiling height - Self-compacting and self-levelling; ready to surface finish after one to three days - Marine flooring systems only installed by accredited Weber contractors MARINE DECK AND SOUND-INSULATED FLOOR SYSTEMS Weber produce a number of floor systems to meet different needs. These include: - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine dB A-60 Floor: Det Norsk Veritas (DNV) A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound CERTIFICATION AND APPROVALS Weber marine products satisfy the requirements of the leading classification societies and authorities. All Weber marine flooring systems are manufactured according to ISO9001 quality standards, and to ISO 14001 environmental management systems and standards. All self-levelling compounds are approved by DNV. See index of Products and Services:

DECK SELFSMOOTHING SCREED - Interior floor, wall & ceiling covers - Sections, foundations, pillars, structural units and bulkheads System groups: 524

INTERIOR FLOORS - Interior doors & windows System groups: 109,51,512,513,514,515

INSULATION - Insulation System groups: 51,52

373_470_LF_2016.indd 447 07.08.2016 11:47:12


448

SCANA MAR-EL ASCompany reg.no: 914192137 Storvegen 48, 3880 Dalen, NORWAY Telephone: +47-35 07 58 00 See index of Products and Services:

CONTROL SYSTEMS - Control & automation systems System groups: 79

PROPULSION CONTROL SYSTEMS - Control & automation systems System groups: 40

EMERGENCY TELEGRAPH - Safety equipment System groups: 503

STEERING GEARS - Steering equipment & stabilizers System groups: 403

JOYSTICK CONTROL SYSTEMS - Control & automation systems System groups: 403,63,791

THRUSTER REMOTE CONTROL, ELECTRONIC - Control & automation systems System groups: 381,79

SCANA SKARPENORD AS - RJUKANCompany reg.no: 937773609 Såheimsveien 2, P.O. Box 3, 3660 Rjukan, NORWAY Telephone: +47-35 09 18 00. Telefax: +47-35 09 18 01 See index of Products and Services:

ACTUATORS - Hydraulic motors & actuators - Pneumatic actuators System groups: 601,651

VALVE EQUIPMENT - Air & gas valves - Fluid valves & other armatures System groups: 442

HYDRAULIC CONTROLS - Control & automation systems System groups: 403,43,634

VALVE REMOTE CONTROL SYSTEM - Control & automation systems System groups: 381,79

HYDRAULIC SYSTEMS - Hydraulic plants & equipment System groups: 83

373_470_LF_2016.indd 448 07.08.2016 11:47:12

449


SEAGULL MARITIME ASGamleveien 36, P.O. Box 1062, 3194 Horten, NORWAY Telephone: +47 33 03 0910. Telefax: +47 33 04 62 79 See index of Products and Services:

MANAGEMENT SYSTEMS - Documentation & data management System groups: 109

SOFTWARE - Onboard software System groups: 109

SERVOGEAR A/SCompany reg.no: 980414159 Brubakken 73, 5420 Rubbestadneset, NORWAY Telephone: +47-53 42 39 50 See index of Products and Services:

GEARS - Gears System groups: 637,638

PROPULSION SYSTEMS - Combustion engine - Propellers & impellers System groups: 60,601,61,62


SIEMENS AS, MARINE & SHIPBUILDING

Bratsbergveien 5, 7037 Trondheim, NORWAY Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Life Cycle Management E-mail: [email protected] On-call 24 hours Phone: +47-815 365 24 Siemens has been around for more than 160 years and is among the world’s major suppliers to the shipping market. Siemens can provide a wide range of excellent and first class solutions and products. Our goal is to deliver safe, environmentally and profitable solutions. As a supplier, Siemens is able to create a long-running cooperation with ship owners to reduce vessel life-cycle costs and at the same time help the yards to be more competitive. Our solutions ensure operational benefits and give a strong contribution to lower fuel consumption and reduced

373_470_LF_2016.indd 449 07.08.2016 11:47:12


450

emission of harmful greenhouse gases. At Siemens you will get all Components from the same manufacturer. Siemens Marine & Shipbuilding supports ship owners globally and sell our solutions through Siemens’ worldwide network. Unique products and solutions for all kind of ships have been developed from our research and production facilities in Norway in cooperation with Siemens AG in Germany. Complete system solutions. Trend setting competence. Worldwide service network. See index of Products and Services:

ALARM SYSTEMS - Monitoring equipment System groups: 381,40,79,792,793,795,85,87,875

LIFE CYCLE MANAGEMENT - Aggregates - Alarm equipment - Centrals, consoles & panels - Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Engineering services - Gears - Generators, alternators & dynamos - Meters & indicators - Monitoring equipment - Project management, construction management - Propellers & impellers - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 109,12,381,40,6,60,61,62,637,638,65,651,66,79,791,792,793,795,85,86,865,867,87,871,872,875,89,898

AUTOMATION SYSTEMS - Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381,40,79,793,795,85,87,875

MAIN SWITCHBOARDS - Switchboards & relays System groups: 871,872,875,89

373_470_LF_2016.indd 450 07.08.2016 11:47:12

451


CONTROL AND MONITORING SYSTEMS - Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381,40,79,793,795,85,87,875

POWER SUPPLIES - Alarm equipment - Centrals, consoles & panels - Control & automation systems - Meters & indicators - Monitoring equipment - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 79,791,792,793,795,85,86

ELECTRIC MOTORS - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,867,898

PROPULSION SYSTEMS - Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears - Propellers & impellers System groups: 40,60,601,61,62,637,638,65,793,795

FREQUENCY CONVERTERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,79,85,867,898

SENSORS AND INSTRUMENTS - Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381,40,79,792,793,795,85,87,875

GEARS AND TRANSMISSIONS - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,637,638,867,898

STARTERS - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,79,85,867,898

GENERATORS - Aggregates - Control & automation systems - Generators, alternators & dynamos System groups: 861,87,871,872,875,89,898

TRANSFORMERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 865

373_470_LF_2016.indd 451 07.08.2016 11:47:12


452

SIMRAD ASStrandpromenaden 50, 3190 Horten, NORWAY Telephone: +47 33 03 40 00. Telefax: +47 33 04 29 87 See index of Products and Services:

CATCH MONITORING SENSORS - Sensors, gauges & detectors

MONITORING SYSTEMS - Monitoring equipment System groups: 14

CATCH MONITORING SYSTEMS - Fishing and hunting equipment System groups: 464

SONAR - Detection & identification equipment System groups: 414

ECHO SOUNDER TRANSDUCERS - Detection & identification equipment System groups: 414

TRAWL SONARS - Fishing and hunting equipment

ECHO SOUNDERS - Detection & identification equipment System groups: 414

SOTRA ANCHOR & CHAIN AS

Company reg.no: 979912722 Gamle Vindenesveg 11, 5363 Ågotnes, NORWAY Telephone: +47-56 32 68 50. Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Sotra Anchor & Chain / Sotra Marine Produkter AS is a company 100 % owned by The SOTRA GROUP. The group was founded in 1980 at Sotra on west coast of Norway. SOTRA ANCHOR & CHAIN has become known as the world`s largest stockist of anchors and chains. The company have today more than 10 000 tonnes brand new and second hand anchors, chain, shackles and accessories for supply within shipping, offshore, aquaculture, shipyards and even to decoration market. The company still have main office and main yard in Norway, but have also established yards in Scotland, The Netherlands and in China. From these yards the company supply anchors and chains to hundreds of ships, offshore drilling rigs, fishfarms and new buildings every year. Although ever increasing order volume, the organisation is small and manage to offer all our customer the best of service. Our staff are able to load and delivery immediate upon order and can make delivery 24 hours a day, 7 days per week if required. Our staff is always available to offer service to all our customer when required.

373_470_LF_2016.indd 452 07.08.2016 11:47:12

453


We have ancors and chains both for sales and rental. See index of Products and Services:

ANCHOR CHAINS - Chains, wires & ropes System groups: 431

MOB BOATS - Lifeboats/rafts & other boats System groups: 501

ANCHORS - Anchors System groups: 431


AQUACULTURE - Fish farming equipment

MOORINGS - Winches, drums & reels System groups: 43

CHAINS - Chains, wires & ropes System groups: 431

SHACKLES - Blocks & shackles System groups: 344


WINCHES - Winches, drums & reels System groups: 33,43

LASHINGS - Cargo handling equipment - Chains, wires & ropes System groups: 315

SPERRE INDUSTRI ASCompany reg.no: 961479142 Ellingsøyvegen 740, 6057 Ellingsøy, NORWAY Telephone: +47 70 16 11 00 See index of Products and Services:

CASTINGS - Other materials System groups: 196

COOLERS - Cooling components for fluids System groups: 362,7


373_470_LF_2016.indd 453 07.08.2016 11:47:12


454

STADT AS

Company reg.no: 984021887 Moloveien 2, 6083 Gjerdsvika, NORWAY Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no Company brochures and datasheets are available on the Internet. For 30 years, STADT has developed, manufactured and installed AC motor-drives, process controls and integrated electric propulsion systems for ships. STADT has always been focusing on development of SUSTAINABLE SOLUTIONS that will have a positive impact on the environmental issues in a global scale. STADT has recently signed several contracts for various ships to use the STADT STASCHO full electric ship propulsion system, and has gained major experience with the system during the project MV “Sanco Star”, delivered in 2008. STADT is a supplier of totally integrated electric systems, including generators, switchboards, motor drives / inverters, power management systems, integrated alarm and monitoring systems, electric motors and DP systems etc. See index of Products and Services:

AC DRIVES - Electrical motors & starters System groups: 62,651,7

INTEGRATED ELECTRIC PROPULSION SYSTEMS - Power generation, propulsion & manouvering System groups: 62,651,7

373_470_LF_2016.indd 454 07.08.2016 11:47:12

455


STAR INFORMATION SYSTEMS ASCompany reg.no: 979176848 Kjøpmannsgaten 35, 7011 Trondheim, NORWAY Telephone: +47-73 87 62 00 See index of Products and Services:

COMMUNICATION - Other communication equipment System groups: 42

INSURANCE SYSTEMS - Engineering software (CAD, analysis) System groups: 11

COMPUTER SYSTEMS - Computer hardware - Onboard software System groups: 542

MAINTENANCE MANAGEMENT - Maintenance, spare parts and supplies - Onboard software System groups: 109

DOCUMENT CONTROL - Documentation & data management - Engineering software (CAD, analysis)

PURCHASING SYSTEMS - Construction/fabrication software System groups: 109

E-COMMERCE - Engineering software (CAD, analysis)

SAFETY MANAGEMENT SYSTEMS - Onboard software - Safety equipment

EDUCATIONAL MATERIAL - Documentation & data management System groups: 112

SHIPPING MANAGEMENT - Project management, construction management

GUARANTEE CLAIMS - Administration, broking, finance & insurance services System groups: 16

SPARE PARTS SYSTEMS - Documentation & data management System groups: 109

373_470_LF_2016.indd 455 07.08.2016 11:47:12


456

TAMROTOR MARINE COMPRESSORS ASCompany reg.no: 976516648 Prof. Birkelands vei 24D, P.O.Box 3 Furuset, 1001 Oslo, NORWAY Telephone: +47 22 91 85 00. Telefax: +47 22 91 84 93 See index of Products and Services:

ADSORPTION DRYERS - AC units, air dryers, air cooling and heating components System groups: 73

FILTERS - Air filters & spark arresters System groups: 73

AIR DRYERS - AC units, air dryers, air cooling and heating components System groups: 57

SCREW COMPRESSORS - Other air/gas/pneumatic equipment System groups: 73


TEAMTEC A/S

Company reg.no: 974388472 Nyvei 41, P.O. Box 203, 4902 Tvedestrand, NORWAY Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no TeamTec is a world leading manufacturer of marine incinerators and stripping ejectors. TeamTec provides high-tech design, production and documentation, and is known worldwide for superior quality, high flexibility and short delivery time. TeamTec adheres to environmentally sound solutions, and the technical specifications of the products are in compliance with existing requirements and regulations. TeamTec and Evonik Resource Efficiency GMBH have signed a cooperation agreement. Since February, 2016 TeamTec has taken over the manufacture, sales and service of the AVITALIS T BWTS. A filter and chemical injection system that ensures complete and environmentally benign BW cleaning in any temperature, salinity and turbidity. The TeamTec Incinerators ensure safe and efficient waste management, which complies with the IMO regulations for both waste oil and solid waste incineration. TeamTec’s bilge water injection solutions for incinerators were launched in 2009, in order to reduce operating costs of bilge water separators and to meet the stricter regulations for discharge. TeamTec supplies incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts.

373_470_LF_2016.indd 456 07.08.2016 11:47:12

457

DIRECTORY OF SUPPLIERS The TeamTec Stripping Ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. The ejectors are superior for all-purpose stripping and have become an important part of the standard equipment on modern new buildings. TeamTec also offers a variety of ejector types and products, and has a flexible in-house casting and production. TeamTec provides comprehensive after sales service for TeamTec’s products worldwide. TeamTec guarantee customers prompt and professional service with maximum cost-effectiveness. See index of Products and Services:

BALLAST WATER TREATMENT SYSTEM - Purification plants & fluid treatment System groups: 801

INCINERATORS - Boilers, burners and incinerators - Maintenance, spare parts and supplies System groups: 445

EJECTORS - Ejectors - Maintenance, spare parts and supplies System groups: 356


ARGENTINA AUSTRALIA BRAZIL BULGARIA CANADA CHINA FRANCE GERMANY GREECE HONG KONG INDIA INDONESIA ITALY JAPAN KOREA, SOUTH

MALDIVES NETHERLANDS, THE NIGERIA POLAND ROMANIA RUSSIA SINGAPORE SPAIN SRI LANKA TAIWAN TURKEY UNITED ARAB EMIRATES UNITED STATES VIETNAM

373_470_LF_2016.indd 457 07.08.2016 11:47:12


458

TEKNOTHERM MARINE A/S

Company reg.no: 996386805 Sørliveien 90-92, 1788 Berg i Østfold, P.O. Box 87, 1751 Halden, NORWAY Telephone: +47-69 19 09 00. Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. Established: 2011 General manager: Roy Moberg Office Ålesund: Kalvøyvegen 20, N-6014 Ålesund Tel.: +47-70 10 71 50. Telefax: +47-70 10 71 51. Subsidary company Norway: Teknotherm-Therma Tromsø AS Stakkevollveien 12, N-9010 Tromsø Tel.: +47 77 61 11 00. Subsidary company Sweden: Teknotherm Refrigeration AB Marieholmsgatan 10B, SE-41 502 Gothenburg, Sweden Tel.: +46-31 217 500. Telefax: +46-31 217 500. Subsidary company Poland: Teknotherm Marine HVAC Ul. Wyspianskiego 51, PL-70 479 Szczecin, Poland Tel.: +48-49 433 18 00. Telefax: +48-49 422 18 01. Subsidary company Russia: Teknotherm Marine HVAC - Repr. Office Korablestriteley dom 32, Korpus 1, Office 35N, RU-199 397 St. Petersburg, Russia Tel.: +7 812 946 9954. Subsidary company Turkey: Teknotherm Marine HVAC - Repr. Office Yala Mah. Vatan Cad. Meka is Merkezi, No: 58/15, Tuzla/Istanbul, Turkey Tel.: +90 533 332 83 97. Subsidiary company China: Teknotherm Refrigeration Wuxi Co. Ltd. No. 19-8, Xingchuang #4 Road, Wuxi Singapore Ind. Park, Jiangsu Province, P.R China Tel.: +86-510 8528 1763. Telefax: +86-510 8528 2537. Teknotherm Marine AS has a history dating back to 1926 as a designer, contractor, and manufacturer of marine-, offshore- and industrial refrigeration systems. Through all these years we have had close contact with our customers in the marine-, offshore- and industrial environment, learning their needs and meeting the special requirements demanded by the industry. The

373_470_LF_2016.indd 458 07.08.2016 11:47:12

459


experience gained has been incorporated into our products, and made Teknotherm Marine a highly competent supplier of marine- offshore- and industrial installations. Being a customizer, always in response to the specific needs of our customers, has made Teknotherm Marine a flexible company, responding to rapid changes. It has also made the organization alert to new trends and fashions in the industry which puts the company in the front line of development. The company delivers complete cooling installations of own production and own design to: -Merchant fleet -Fishing fleet -Offshore industry -Industrial industry The company also delivers various refrigeration components for freezing systems and heat exchangers. See index of Products and Services:

AIR CONDITIONING - AC units, air dryers, air cooling and heating components System groups: 57

FREEZING SYSTEMS - AC units, air dryers, air cooling and heating components System groups: 57

CARGO REFRIGERATION - Cargo handling equipment System groups: 3

PROVISION STORAGE - Galley, pantry equipment and whiteware System groups: 552

COMPRESSORS - Compressors

REFRIGERATION, SPARE PART - AC units, air dryers, air cooling and heating components System groups: 362,554

CONDENSERS - Evaporators, condensers and receivers

RSW SYSTEMS - Cargo handling equipment System groups: 32

COOLING SYSTEMS - AC units, air dryers, air cooling and heating components System groups: 362,554

373_470_LF_2016.indd 459 07.08.2016 11:47:12


460


CHILE CROATIA FINLAND GREECE NETHERLANDS, THE

POLAND RUSSIA SOUTH AFRICA TURKEY UNITED KINGDOM

THERMAL TEC ASKurudvegen 55, 2322 Ridabu, NORWAY Telephone: +47 62 58 59 30 See index of Products and Services:

ELECTRIC HEATED SYSTEMS - Electrical heating System groups: 88

STEAM GENERATORS - Heat exchangers & steam generation System groups: 64,74,794

EXHAUST GAS BOILERS - Boilers, burners and incinerators System groups: 577,64,841

TANK HEATING SYSTEMS - Electrical heating System groups: 57

GENERATOR SYSTEMS - Generators, alternators & dynamos System groups: 196,40

TRANBERG A.S.

Company reg.no: 986926909 Strandsvingen 6, Gausel, P.O. Box 8033, 4068 Stavanger, NORWAY Telephone: +47-51 57 89 00. Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. Tranberg AS has since 1901 designed, manufactured and supplied high quality electromechanical products for use on ships and offshore installations. Experienced engineering skills and flexible production capabilities are vital in order to adapt to rapidly changing demands. The company is also continuously updated to changes in national and international safety and environment regulations and the Quality Management System has been ISO 9001-certified since 1995. Tranberg offers a wide range of high quality products: -Navigation and Signal Lights and Control Panels -Luminaires, Searchlights and Floodlights -Heavy Duty Switches, Sockets and Connectors -Windsocks and Deck Lights for Helicopter Landing Areas -Junction Boxes and Control Stations in Stainless Steel 316L and Brass

373_470_LF_2016.indd 460 07.08.2016 11:47:12

461


-Thermostats and Special Components for Heat Tracing and Instrument heating -Cable Glands and Adaptors -Trace Heating, Instrument Heating and Process Heating -Electrical De-Ice / Winterization Our main markets are the International Marine and Oil & Gas related Industry. Tranberg Navigation Lighting Systems, as Navigation Lights, Signal Lights, and Navigation/Signal Light Controllers, comply with all relevant COLREG, SOLAS and IEC regulations/norms, and are additional to this, certified by DNV (Det Norske Veritas) according to COLREG 72 and DNV Rules for Classification of Ships. The company’s Quality Management System is certified according to ISO9001:2008 by Dekra. Our production holds production quality assurance notification for ATEX and IECEx and Quality assessment according to “Forskrift om skipsutstyr” ( Directive 2009/26/EC). Products manufactured for hazardous areas are all Atex-certified by Nemko or DNV. Addition to this range of quality products, Tranberg also provides complete solutions for electrical heating of industrial process, within Oil & Gas-, Refineries-, and other Process Industries. See index of Products and Services:

CABLE GLANDS - Power cables System groups: 88

HELIDECK LIGHTING - Lighting equipment & armatures System groups: 427

CAMERA SYSTEMS - Control & automation systems System groups: 1

LIGHTING SYSTEMS - Lighting equipment & armatures System groups: 427,89,893

CONTROL STATIONS - Control & automation systems System groups: 196

NAVIGATION - Positioning & navigation equipment System groups: 17

ELECTRICAL ANTI-ICE/DE-ICE - Electrical and electro work System groups: 88

OBSTRUCTION LIGHTS - Lighting equipment & armatures System groups: 427

ELECTRICAL INSTALLATION EQUIPMENT - Electrical and electro work System groups: 85,87,88

SHIP HORNS - Other nautical equipment System groups: 427

ENCLOSURE SYSTEMS - Control & automation systems System groups: 41

WIND-SCREEN WIPERS - Bridge inventory & equipment System groups: 1

HEATING SYSTEMS - Control & automation systems System groups: 41

373_470_LF_2016.indd 461 07.08.2016 11:47:12


462


ARGENTINA AUSTRALIA BRAZIL CANADA CHILE CHINA CROATIA DENMARK FINLAND FRANCE GERMANY ICELAND INDIA ITALY JAPAN

KOREA, SOUTH MALAYSIA MEXICO NETHERLANDS, THE PERU POLAND PORTUGAL RUSSIA SINGAPORE SPAIN TURKEY UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES VIETNAM

TTS MARINE AS (NORWAY)

Barstølveien 26, 4606 Kristiansand, NORWAY Telephone: +47 38 04 95 00. Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet. TTS Marine AS, is headquartered in Kristiansand, Norway and also have an office in Bergen, Norway. It is a product and service company and forms part of the TTS Marine division. TTS Marine AS is the center of excellence for aftersales, service, conversion, inspection and training for marine cranes, offshore equipment, davits and other lifesaving equipment. It also design and supplies rescue boat davits, fender davits, winch bollards and service platforms See index of Products and Services:

FENDER DAVITS - Davits and masts System groups: 501

SERVICE PLATFORMS - Hatches, covers, ports, ramps & platforms System groups: 30

RESCUE BOAT DAVITS - Davits and masts System groups: 501

WINCH BOLLARDS - Capstans, bollards & hawse holes System groups: 274,33,381,432

373_470_LF_2016.indd 462 07.08.2016 11:47:12

463


TTS SHIPS EQUIPMENT AS

Company reg.no: 932142104 Folke Bernadottes vei 38, Fyllingsdalen, P.O. Box 3577 Fyllingsdalen, 5845 Bergen, NORWAY Telephone: +47 55 11 30 50 . Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com TTS Ships Equipment AS, located in Bergen, Norway, is designated the side loading equipment ’Centre of Excellence’ and forms part of the TTS Offshore & Heavy lift division. TTS Ships Equipment is a leading designer and supplier of cargo handling and cargo access equipment for a variety of vessel types, including dry cargo ships, reefer ships and offshore vessels. Working closely with customers, the company combines knowledge and experience with creativity and innovation to develop optimal solutions for the many logistical demands of handling and accessing unitised cargo. Equipment for Offshore vessels TTS Ships Equipment AS can supply a wide variety of different external doors, moon pool hatch covers, hangar doors, observation platforms, provision platforms and other types of doors. Equipment for cruise ships and passenger ferries TTS Ships Equipment offers a wide range of personnel access and cargo handling equipment including complete side loading systems and solutions for handling and accessing unitised cargo and personnel for cruise ships and passenger ferries. The company can tailor products to suit the individual requirements of shipowners and operators. See index of Products and Services:

BOOM CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,3,307,32,327

HATCH COVERS - Hatches, covers, ports, ramps & platforms System groups: 30

BOW EQUIPMENT - Structural work and surface treatment (plate, welder, paint) System groups: 2

KNUCKLE/TELESCOPIC CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,3,321,33

CARGO CRANES - Cranes, crane equipment, lifting devices & booms System groups: 274,3

MOON POOL HATCH COVERS - Hatches, covers, ports, ramps & platforms System groups: 30

EXTERNAL SIDE DOORS - Watertight/weathertight doors & windows System groups: 514

SIDELOADING SYSTEMS - Cargo handling equipment - Cranes, crane equipment, lifting devices & booms System groups: 307

HANGAR DOORS - Watertight/weathertight doors & windows

373_470_LF_2016.indd 463 07.08.2016 11:47:12


464

TTS SYNCROLIFT AS

Company reg.no: 939077774 Holterkollveien 6, P.O. Box 49, 1441 Drøbak, NORWAY Telephone: +47 64 90 79 10. Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. TTS Syncrolift AS has during the last thirty years been a major supplier to ship yards worldwide with state of the art products. In these years we have demonstrated our performance and innovatory characteristic solving our client challenges. As a leading supplier of shipyard production technology, heavy load handling and shipyard consultancy, TTS gives you the profitable opportunity to work with one professional partner in the whole modernisation process. TTS has continuously developed systems for handling, launching and docking purposes. Today we offer a wide range of products for efficient Block and Ship Transfer Systems, as well as shiplift and slipway systems. Our transfer systems include rail trolleys, tyre wheel system and track/tyre-less systems. All TTS applications are designed as fluid bed systems. This means that the impact forces will be distributed out, i.e. there will be no high peak loads during the handling of blocks or ships and the user knows exactly which forces that are exerted on the ship/block and ground at any time. The TTS Ship Transfer Systems have been delivered both to navy and commercial shipyards, for construction as well as repair. See index of Products and Services:

BLOCK POSITIONING UNITS (BPU`) - Blocks & shackles System groups: 274,344

PROFILE AND BEAM CUTTING LINES - Plates and profiles System groups: 196

DOCKING SUPPORT ARMS - Repairs, modifications & docking System groups: 144

RAIL TRANSFER SYSTEM - Ladders, railings, stairs, ramps & gangways System groups: 52

DOCKLIFT - Repairs, modifications & docking System groups: 144,17

SHIP HANDLING TROLLEY (SHT) - Repairs, modifications & docking System groups: 144,17

DUAL WALKING BEAM (DWB) - Repairs, modifications & docking System groups: 144,17

SHIPLIFT - Lifts, hoist & escalators System groups: 321,561

MULTIWHEELERS - Repairs, modifications & docking System groups: 144,17

T AND H BEAM WELDING LINES - Welding & cutting equipment System groups: 191,441

PANELL PRODUCTION LINES - Repairs, modifications & docking System groups: 144,17

WEB WELDING LINES - Welding & cutting equipment System groups: 191,441

POWERED WHEEL TRANSPORTER (PWT) - Repairs, modifications & docking System groups: 144,17

373_470_LF_2016.indd 464 07.08.2016 11:47:12

465


ULMATEC PYRO ASCompany reg.no: 966300345 Gamlem, 6280 Søvik, NORWAY Telephone: +47 70 20 98 70. Telefax: +47 70 20 98 90 See index of Products and Services:

CENTRAL HEATING SYSTEM - Centrals, consoles & panels System groups: 84

INCINERATORS - Boilers, burners and incinerators System groups: 445

EXHAUST GAS ECONOMIZER - Exhaust components & silencers System groups: 109,601,641,743

TANK HEATING SYSTEMS - Tank cleaning equipment System groups: 382,444

VESTDAVIT ASDamsgårdsveien 143, 5160 Laksevåg, NORWAY Telephone: +47 55 54 92 00. Telefax: +47 55 34 24 04 See index of Products and Services:


VESTNES OCEAN AS

Company reg.no: 979523483 Leirvåggt. 1, P.O. Box 409, 6901 Florø, NORWAY Telephone: +47 57 75 20 70. Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. «Vestnes Ocean is a Scandinavian supplier of forward thinking interior solutions. We deliver “turn key” supplies of ship interior and outfitting. Vestnes Ocean provides complete services such as design, engineering, insulation, wall systems, flooring solutions, ceilings, galley equipment, curtains and of course our own furniture line “Willy” and “Keys” which we have developed together with professional designers and seamen. We make sure you get the quality and design you will want to have in a living quarter. Some of our references is major shipowners of Chemical tankers, juice carriers, PSV`s, Pipe laying vessels, navy and fishing vessels.”

373_470_LF_2016.indd 465 07.08.2016 11:47:13


466


CABINETS - Furniture & cabinets System groups: 5,51,541,548


CEILINGS - Interior floor, wall & ceiling covers System groups: 511

SHIP INTERIOR - Interior floor, wall & ceiling covers System groups: 511,524


WALLS - Interior floor, wall & ceiling covers System groups: 511

FLOOR COVERING - Interior floor, wall & ceiling covers

WATER MIST ENGINEERING AS

Lohnelia 70, 4640 Søgne, NORWAY Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no Water Mist Engineering AS does engineering and manufacturing of Active Fire Fighting systems and Fire Prevention system. Through the years the company has become a single source, full-service and product supplier of Fire Protection systems. Our commitments to excellence are based upon an extensive experience within Fire engineering, System building, Process product and Systems Development within air-gas separation, services and commissioning. WME focuses on delivering innovative engineering services as well as cost efficient and high quality Fire Protection systems. WME is experienced in delivering Projects according to leading international standards like NORSOK, DNV, NFPA, BV etc. WME holds numerous references within Maritime & Offshore installations as well as chemical industry systems worldwide. See index of Products and Services:

FIRE FIGHTING SYSTEMS - Firefighting equipment System groups: 376,505,57,81,813

NITROGEN GENERATOR SYSTEMS - Generators, alternators & dynamos System groups: 196,376,6

373_470_LF_2016.indd 466 07.08.2016 11:47:13

467


WESTAD INDUSTRI AS

Company reg.no: 936612741 Heggenveien, 3360 Geithus, NORWAY Telephone: +47-32 78 95 00. Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Company brochures and datasheets are available on the Internet. The company was established in 1895 by Daniel Westad and manufactured initially valves to local pulp and paper industry. Various transitions in the industry allowed Westad to start serving the Marine industry around 1950. With the arrival of oil and gas production in Norway in the late 1970-ties, Westad adapted its product lines to serve this demanding market segment. Material requirements increased, and Westad delivered on its reputation. Special stainless steel materials like Titanium, Duplex, Super-duplex and 6MO became the common materials for valves in demanding services. Westad aims to be the leading supplier of high tech butterfly valves and ball valves for LNG, LPG, chemicals and other critical applications. Westad is a well reputed supplier of valves to the Marine Industry, Oil & Gas downstream and Oil & Gas upstream. Westad has for decades delivered butterfly valve packages to the offshore industry, the last major project being to Goliat. We are also providing valves to the FPSO business. Westad Industri AS is located at Geithus approximately 70 km outside Oslo. See index of Products and Services:


VALVES - Air & gas valves - Fluid valves & other armatures System groups: 3,6,7

373_470_LF_2016.indd 467 07.08.2016 11:47:13


468

YARA MARINE AS

Drammensveien 134, 0277 Oslo, NORWAY Telephone: +47 47 88 85 44 e-mail: [email protected] Internet: www.greentechmarine.com Company brochures and datasheets are available on the Internet. Yara Marine Technologies develops innovative and high-performance solutions within environmental and energy-saving technology for the maritime and offshore industries. Their offices are located in Norway and Sweden. Yara Marine Technologies was founded in 2010 but its founders have many years of experience in the maritime industry as well as first-hand experience at sea. Yara Marine Technologies’ mission is to create exhaust gas cleaning and energy saving solutions that not only benefit the planet, but create significant financial rewards for clients. The first pilot installation of a Green Tech Marine® scrubber was conducted in the winter 2011-2012, after which DNV issued a statement of compliance. The company is supported by Innovation Norge, a fund supporting promising companies with strong business concepts. This gives the company a solid financial base. See index of Products and Services:

SCRUBBERS - Purification plants & fluid treatment System groups: 70

The Supplier is represented in the following countries: SWEDEN

373_470_LF_2016.indd 468 07.08.2016 11:47:13

469


ZENITEL NORGE ASCompany reg.no: 863503922 Bromsveien 17, 3194 Horten, NORWAY Telephone: +47 40 00 27 00 See index of Products and Services:

BATTERYLESS TELEPHONE SYSTEMS - Radio & telephone communication System groups: 425

SOUND SIGNAL RECEPTION SYSTEMS - Detection & identification equipment System groups: 426,427

CENTRAL CLOCK SYSTEMS - Other nautical equipment System groups: 417

TALK-BACK SYSTEMS - Other communication equipment System groups: 425

INTEGRATED COMMUNICATION SYSTEMS - Other communication equipment System groups: 42

TELEPHONE SYSTEMS - Radio & telephone communication System groups: 425

PUBLIC ADDRESS SYSTEMS - Other communication equipment System groups: 425

TV ANTENNA SYSTEMS - Antennas & transmitters System groups: 546

373_470_LF_2016.indd 469 07.08.2016 11:47:13


470

373_470_LF_2016.indd 470 07.08.2016 11:47:13

471

SALES REPRESENTATIVES - Alphabetical List

SALES REPRESENTATIVESALPHABETICAL LIST

471_512_SR_Alf_2016.indd 471 07.08.2016 11:47:25


472

Acebi Saint-Herblon FR-44150 Ancenis FRANCE Telephone: +33 240 98 00 06 Telefax: +33 240 98 09 22 Email: [email protected] Contact person: Jean-Pierre Moreau www.acebi.com Preferred Makers represented: Norsafe AS Aegean Dynamic Services Ltd. 71 Akti Miaouli GR-185 37 Piraeus GREECE Telephone: +30 210 4280444 Telefax: +30 210 4280443 Email: [email protected] www.aegeandynamic.com Preferred Makers represented: Optimarin AS Aegean Dynamic Services Ltd. 49 Metochiou Street, Orphil Court, Office 301 CY-CY-1101 Nicosia CYPRUS Telephone: +357 22 661 988 Telefax: +357 22 660 521 Email: [email protected] www.aegeandynamic.com Preferred Makers represented: Optimarin AS Aeron Energy Technology Co. Ltd. Building 7, 530 Huicheng Road, Huinan Town, Pudong New District CN-201300 Shanghai CHINA Telephone: +86 21 5228 2590 Telefax: +86 21 5228 6173 Email: [email protected] Preferred Makers represented: AF Offshore AeronMollier AS

AFA Marine ul. Polnicy 37/6 PL-80-177 Gdansk POLAND Telephone: +48-58-3030159 Telefax: +48-58-3030351 Email: [email protected] Contact person: Mirka Gierak Preferred Makers represented: Brunvoll A.S Akor ehf Logasalir 1 IS-201 Kópavogur ICELAND Telephone: +354 517 9100 Telefax: +354 517 1902 Email: [email protected] Preferred Makers represented: Tranberg A.S. All Pumps Holland B.V. Achterdijk 84a Postbus 41, 4140 AA Leerdam NL-4243 TM Nieuwland NETHERLANDS, THE Telephone: +31 (0) 345-62 13 44 Email: [email protected] www.allpumpsholland.nl Preferred Makers represented: Teamtec A/S Alliance Safety Pte Ltd Block 3016 Bedok North Avenue 4, #06-06 Eastech SG-489947 Singapore SINGAPORE Telephone: +65 65424131 Email: [email protected] Contact person: Stanley Anthony Preferred Makers represented: Hansen Protection AS

471_512_SR_Alf_2016.indd 472 07.08.2016 11:47:25

473

SALES REPRESENTATIVES - Alphabetical List Alpha Marine Engineering Ltd. Salaminos 43 GR-166 74 Glyfada, Athens GREECE Telephone: +30 210 89 43 220 Telefax: +30 210 96 80 210 Email: [email protected] Contact person: Mr. Dimitris Perakis www.ame.gr Preferred Makers represented: Brunvoll A.S Maritime Partner AS Teamtec A/S Alula S.A. 6F, No. 9, Lane 3, Min Sheng West Road TW-104 Taipei TAIWAN Email: [email protected] Preferred Makers represented: Optimarin AS AMI 107 Forsyth Street AU-W.A. 6163 O’Connor AUSTRALIA Telephone: +61-8-9337 3266 Telefax: +61-8-9314 2929 www.amisales.com.au Preferred Makers represented: Harding Safety AS Apel / CSA Enterprises 35 Ash Lake Court, Bayers Lake Business Park CA-B3S 1B7 Halifax, Novia Scotia CANADA Telephone: +1 902 4505647 Telefax: 1 902 4505286 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Ardee Saigal Group 83-c, Mittal Court, Nairman point IN-400 021 Mumbai INDIA Telephone: +91 22 22 04 02 57 Telefax: +91 22 22 4 72 93 Email: [email protected] Contact person: Raj Choudhari Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Asolan Integrated Projects Limited Plot 21, 19th Street Bendel Estate Warri NIGERIA Telephone: +234 80522 29650 Email: [email protected] Preferred Makers represented: Teamtec A/S Atlantique Shipping 95 Route de Leur Ar March FR-29470 Plougastel-Daoulas FRANCE Telephone: +33-02 98 04 26 59 Telefax: +33 2 9804 2268 Email: [email protected] Contact person: Patrick Le Bihan Preferred Makers represented: Brunvoll A.S ATP Trading OY Vartiokylantie 9 P.O. Box 77 FI-00931 Helsinki FINLAND Telephone: +358-9-3250055 Telefax: +358-9-3250883 Email: [email protected] Contact person: Antti Parkinen Preferred Makers represented: Libra-Plast AS Teknotherm Marine A/S

471_512_SR_Alf_2016.indd 473 07.08.2016 11:47:25


474

Automatic Systems engineering Sp. z.o.o. Ul. Narwicka 6 PL-80-557 Gdansk POLAND Telephone: +48 58 520 77 20 Telefax: +48 58 346 43 44 Email: [email protected] Preferred Makers represented: Tranberg A.S. Axon Group DMCCO / Axon Offshore Group S.A. Dubai Maritime City, P.O. Box 124974 Dubai UNITED ARAB EMIRATES Telephone: +971 505 054584 Email: [email protected] Contact person: Rajiv Saigal Preferred Makers represented: Brunvoll A.S Bater d.o.o. Kampanja 19 HR-51000 Rijeka CROATIA Telephone: +385 51 216 104 Telefax: +385 512 17 383 Email: [email protected] Contact person: Ivan Mataja Preferred Makers represented: Teknotherm Marine A/S Bavcar, Claudio Via U. Felluga 90/2 IT-34132 Trieste ITALY Telephone: +39 040 94 37 36 Telefax: +39 040 39 45 51 Email: [email protected] Contact person: Claudio Bavcar Preferred Makers represented: Brunvoll A.S

BetuMar Import/Export Ltd. Evliya Çelebi Mh., Gizem Sokak No: 11 Dükkan: 1 TR-34945 Tuzla - Kadiköy TURKEY Telephone: +90 216 447 31 91 Telefax: +90 216 447 31 93 Email: [email protected] Contact person: Serge van der Haegen www.betumar.com Preferred Makers represented: Finnøy Gear & Propeller AS Biardo survival suits bv De Trompet 2800 NL-1967 DD Heemskerk NETHERLANDS, THE Telephone: +31 (0)251 241256 Telefax: +31 (0)251 246932 Email: [email protected] Preferred Makers represented: Hansen Protection AS BMS Marine Survey ul. Wyczólkowsiego 73 PL-80 147 Gedansk POLAND Telephone: +48 58 30 20 13 0 Telefax: +48 58 30 20 13 0 Email: [email protected] Contact person: Mr. Zbigniew Baranski and Mr. Krzysztof Pazderski Preferred Makers represented: Teamtec A/S

471_512_SR_Alf_2016.indd 474 07.08.2016 11:47:25

475


Boema Hi-Tec Ltd. 4th Floor, Seoul Bldg., 1532-7 Seocho 3-Dong, Seocho-Gu KR-137-871 Seoul KOREA, SOUTH Telephone: +82-2-3486 3340 Telefax: +82-2-3486 3341 Email: [email protected] Contact person: Hyun Ock Kim Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Bridon International - Certex Doncaster, Carr Hill GB-DNU 8DG Doncaster, South Yorkshire UNITED KINGDOM Telephone: +44-302-344010 Telefax: +44-302-640449 Preferred Makers represented: Masto Wire Service A/S Bridon Middle East P.O. Box 16931 Dubai UNITED ARAB EMIRATES Telephone: 084-35129 Telefax: 084-35689 Preferred Makers represented: Masto Wire Service A/S Bridon Singapore (PTE) Ltd. Jurong Town P.O. Box 390 SG-9161 Singapore SINGAPORE Telephone: 65-2664811 Telefax: 65-2654100 Preferred Makers represented: Masto Wire Service A/S

Bridon Svenska A.B Lundbyhamnen 122 Box 8713 SE-402 75 Gøteborg SWEDEN Telephone: 46-0-31508650 Telefax: 46-0-31518281 Contact person: Liss Henriksson Preferred Makers represented: Masto Wire Service A/S Bripindo Ciladak Commersial Estate, Building 404 P.O. Box 5/CCE SAK SEL ID-12560 Jakarta INDONESIA Telephone: 7801936/7802192 Telefax: 7860779 Preferred Makers represented: Masto Wire Service A/S Brunvoll Deutschland / Steinbach Ingenieurtechnik Robert Bosch Str. 7A DE-23909 Ratzeburg GERMANY Telephone: +49 4541 802610 Telefax: +49 4541 8026120 Email: [email protected] Contact person: Jörg Steinbach Preferred Makers represented: Brunvoll A.S Bureau of Eng Morad, Ahmed 278 Cornich Avenue, Stanley Beach Alexandria EGYPT Telephone: +20 3 54 36 140 Telefax: +20 3 54 11 060 Email: [email protected] Contact person: Morad S. Ahmed Preferred Makers represented: Norsafe AS

471_512_SR_Alf_2016.indd 475 07.08.2016 11:47:25


476

Caspian Marine Services Pte Ltd. (Marine Lighting) TradeHub 21, 18 Boon Lay Way #06-108 SG-609966 Singapore SINGAPORE Telephone: +65 68468180 Telefax: +65 68468011 Email: [email protected] Preferred Makers represented: Tranberg A.S. Caspian Marine Services Pte. Ltd. Tradehub 21, 18 Boon Lay Way #06-108 SG-609966 Singapore SINGAPORE Telephone: + 65 68 46 81 80 Mob.phone: +65 96 89 99 89 Telefax: Telefax: + 65 68 46 80 11 Email: [email protected] Contact person: Reeve Tan Preferred Makers represented: AF Offshore AeronMollier AS Ceiling Works P.O. Box 70 Glengarry LPO AU-WA 6023 Glengarry LPO AUSTRALIA Telephone: +61 89 302 5777 Telefax: +61 89 302 5788 Email: [email protected] Preferred Makers represented: Libra-Plast AS Ceiling Works P.O. Box 70 NZ-WA 6023 Duncraig East LPO NEW ZEALAND Telephone: + 61 89 302 57 77 Telefax: + 61 89 302 57 88 Email: [email protected] Contact person: Mr. Jim Mc Inerney Preferred Makers represented: Libra-Plast AS

Certex P.O. Box 18428 US-TX 77223 Houston UNITED STATES Telephone: 713-921 4101 Telefax: 713-931 4493 Contact person: Tom Hana Preferred Makers represented: Masto Wire Service A/S Cetus Naval Chile 1465 - 2 “B” AR-C1098AB Buenos Aires ARGENTINA Telephone: +54 11 4384 0842 Telefax: +54 11 4331 9426 Email: [email protected] www.cetus-naval.com.ar Preferred Makers represented: Optimarin AS Tranberg A.S. Cetus-Naval Ferreyra & Asociados S.H. Chile 1465 - 2 “B” AR-C1098AB Buoenos Aires ARGENTINA Telephone: +5411 4384 08 42 Telefax: +5411 4331 94 26 Email: [email protected] Contact person: Mr. A. Ferreyra / Mob: +54911 5630 42 47 Preferred Makers represented: Brunvoll A.S Teamtec A/S

471_512_SR_Alf_2016.indd 476 07.08.2016 11:47:25

477


Chidambaram Shipcare Private Limited 38 Second Line Beach IN-600 001 Chennai INDIA Telephone: (91) (44) 25220304 Telefax: (91) (44) 25220080 Email: [email protected] www.shipcare.in Preferred Makers represented: Optimarin AS Christie + Gray Ltd Morley Road, Tonbridge GB-TN9 1RA Kent UNITED KINGDOM Telephone: +44 1732 371100 Telefax: +44 1732 359666 Email: [email protected] www.christiegray.com Preferred Makers represented: Centa Transmisjoner A.S. Cifast S.P.A. Centro Funi, Corso Bramante 56 IT-10126 Torino ITALY Telephone: +11-6965151 Telefax: +11-637055 Contact person: Franco Tonus Preferred Makers represented: Masto Wire Service A/S Clean Ship Scandinavia AB Sodra Kroksdal 67 SE-SE - 47 133 Skarhamn SWEDEN Telephone: +46 736 791 399 Email: [email protected] www.cleanship-scandinavia.com Preferred Makers represented: Optimarin AS

Cogema, Comêrcio Geral De Mâquinas, Lda. Av. Sidonio Pais 28-4,Drt PT-P-1050 Lisboa PORTUGAL Telephone: +351 21355 6843 Telefax: +351 21355 7498 Email: [email protected] Contact person: Mr. Alberto Andrade Preferred Makers represented: Libra-Plast AS Comrod Communication Jebel Ali Free Zone P.O Box 18214 Duvai UNITED ARAB EMIRATES Telephone: +971 50 531 6723 Telefax: +971 4 802 7001 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Comrod France S.A. 600 Chemin des Hamaïdes, BP 10119, FR-59732 Saint Amand Les Eaux FRANCE Telephone: +33 32722 8550 Telefax: +33 32722 8555 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Comrod Inc. 12830 Triskett Road US-44111 Cleveland, Ohio UNITED STATES Telephone: 216-252-6610 Telefax: 216-252-6615 Email: [email protected] Preferred Makers represented: Comrod Communication A/S

471_512_SR_Alf_2016.indd 477 07.08.2016 11:47:25


478

Comrod Sweden AB Wibevägen 1 SE-79227 Mora SWEDEN Telephone: +46 70 216 1122 Telefax: +46 250 10392 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Consilium Middle East (FZC) B3-22, SAIF Zone P.O.Box 8018 Sharjah UNITED ARAB EMIRATES Telephone: +971 6 55 70 740 Telefax: +971 6 55 70 741 Email: [email protected] Contact person: Mr. K.P. Krishnan www.consilium.ae Preferred Makers represented: Teamtec A/S Dae Hwa Trading Co. #1715, 17th Floor of Centrum IS Tower 1209, Jaesong-Dong, Haeundae-Gu KR-612 050 Busan KOREA, SOUTH Telephone: +82 51 747 5460 - Mobil +82 11 59 42 510 Telefax: +82 51 747 5426 Email: [email protected] Contact person: J.H. Tak Preferred Makers represented: Norsafe AS

Daehwa Trading Company #1715, 17th floor Centrum IS Tower, 1209 Jaesong-Dong, Haeudae-Gu KR-612 050 Pusan KOREA, SOUTH Telephone: +82-51-747-5460 Telefax: +82-51-747-5426 Email: [email protected] Preferred Makers represented: Optimarin AS Desimat Ltda, Ingeniera Av. Puerto Vespucio CL-9670 Pudahuel Santiago CHILE Telephone: +56 2 7470152 Telefax: +56 2 7470153 Email: [email protected] Preferred Makers represented: Tranberg A.S. Desimat Peru SAC Av. Velasco Astete 2371 Surco-Lima PERU Telephone: +51 1 2752765 Telefax: +51 1 2752776 Email: [email protected] Preferred Makers represented: Tranberg A.S. Diamond Braid International P.O. Box 6540 US-TX 77325 Kingwood UNITED STATES Telephone: 888-643-4096 Email: [email protected] www.diamondbraidintl.com Preferred Makers represented: EuroRope Marine AS

471_512_SR_Alf_2016.indd 478 07.08.2016 11:47:25

479


Donna HF Háihvammur 16 IS-220 Hafnarfjörâur ICELAND Telephone: +354 555 3100 Telefax: +354 365 3455 Email: [email protected] Contact person: Olafur Magnusson www.donna.is Preferred Makers represented: Maritime Partner AS Dräger Marine & Offshore (Unisafe) Beurtschipperstraat 1 NL-3194 AL Hoogvliet NETHERLANDS, THE Telephone: +31 (0) 10 295 2710 Email: [email protected] www.unisafe.nl Preferred Makers represented: Hansen Protection AS DSL Trading Put Ltd. c/6-103/104, Kanchau Pushd Complex, Opp. Suraj Water Park,Kavsar, G.B. Road IN-400 607 Thane (W) INDIA Telephone: +91 25970125/26 Telefax: +91 25970127 Email: [email protected] Preferred Makers represented: Masto Wire Service A/S Ecatdan ApS 3. Angel Georgiev Str. BG-9000 Varna BULGARIA Telephone: +359 52 618265 Email: [email protected] Preferred Makers represented: Teamtec A/S

Electromach bv Hamerstraat 10 P.O. Box 175 NL-7550 AD Hengelo NETHERLANDS, THE Telephone: +31 74 2 472 472 Telefax: +31 74 2 435 925 Email: [email protected] Preferred Makers represented: Tranberg A.S. Emami, Eng. I. Pariz Kala, Apt. 19 (6th floor), No. 147, Khoramsha Avenue IR-15338 Teheran IRAN Telephone: +98 21 875 3080 Telefax: +98 21 857 0582 Email: [email protected] Preferred Makers represented: Norsafe AS Emder Ship Supply Zu den Hafenbecken 7-9 DE-26723 Emden GERMANY Telephone: +49 4921 8009-0 Telefax: +49 4921 8009-10 Email: [email protected] www.emder.de Preferred Makers represented: EuroRope Marine AS EMS Ship Supply (Singapore) Pte Ltd 7, Kian Teck Drive SG-628824 Singapore SINGAPORE Telephone: +65 6261 1600 Telefax: +65 6261 1500 Email: [email protected] Contact person: Barry Heng www.ems-shipsupply.com Preferred Makers represented: Hansen Protection AS

471_512_SR_Alf_2016.indd 479 07.08.2016 11:47:25


480

Enmao Corporation 715 Ho, Ocean Tower, Wu 1-Dong, Haeundae-Gu KR-612-021 Busan KOREA, SOUTH Telephone: +82 517 405 140 Telefax: +82 517 405 142 Email: [email protected] Contact person: Lim Young-Hak Preferred Makers represented: AF Offshore AeronMollier AS Anda-Olsen AS Environmental Marine Partners, LLC 915 8th street unit #204 US-FL 33139 Miami Beach UNITED STATES Telephone: +1 78 63 59 46 35 Telefax: +1 78 63 59 46 35 Email: [email protected] Contact person: Bjørn Erik Hansen Preferred Makers represented: Parat Halvorsen A-S Equimer - Folliard 30 Avenue Amiral Lemonnier FR-78150 Marly le Roi FRANCE Telephone: +33 139 16 35 80 Telefax: +33 139 16 31 94 Email: [email protected] Contact person: Mr. P. Folliard, Mob: +33 663 27 94 26 www.equimer.com Preferred Makers represented: Teamtec A/S

Equipos Nornaval S.A. C/García Barbón, 89 - 3º ES-36201 Vigo SPAIN Telephone: + 34 91 575 2960 Telefax: + 34 91 578 3898 Email: [email protected] Contact person: Rafael Gutiérrez www.scel.no Preferred Makers represented: AF Offshore AeronMollier AS Brunvoll A.S Libra-Plast AS Eximtec Ltda. Neverie 4444, Floor 9 P.O. Box 3414 Santiago CHILE Telephone: +(56-2) 2076590. Mob. phone: + (56-9) 8700165 Telefax: + (56-2) 2076591 Email: [email protected] Contact person: Norberto E. Sainz Preferred Makers represented: AF Offshore AeronMollier AS Eximtec Ltda. Avenida Apoquindo 4501, 4, Office 404 Las Condes-Santiago CHILE Telephone: +56-2-2076590 Telefax: +56-2-2076591 Email: [email protected] Contact person: Norberto E. Sainz Preferred Makers represented: Brunvoll A.S Teknotherm Marine A/S

471_512_SR_Alf_2016.indd 480 07.08.2016 11:47:25

481


Eylex Pty Ltd. 9/10 Anella Avenue AU-NSW 2154 Castle Hill AUSTRALIA Telephone: +61 2 8850 0599 Telefax: +61 2 9894 1662 Contact person: Mr. Todd Williams Preferred Makers represented: Comrod Communication A/S Fode Nigeria Limited 24 Erastus Akingbola Street, Lekki Phase 1 Lagos NIGERIA Telephone: +234 1 271 8608/8609 Telefax: +234 1 271 8610 Email: [email protected] Contact person: Paul Blake www.fode-ltd.com Preferred Makers represented: Norsafe AS For Win Equipment & Engineering Co Ltd, Beijing Office Room 205, House Hao Bai C2 Block Building, No. 50, Xisanhuanbeilu CN-100044 Beijing CHINA Telephone: +86 10 88515498 88517369 88512699 88515022 Telefax: +86 10 88517458 Email: [email protected] Contact person: Cathy Yang www.forwin.com.cn Preferred Makers represented: Finnøy Gear & Propeller AS

Forbes Refrigeration Ltd. Station Road GB-AB41 9AY Ellon, Aberdeenshire, Scotland UNITED KINGDOM Telephone: +44-1358-72 08 53 Telefax: +44-1358-72 18 98 Contact person: Gordon Forbes Preferred Makers represented: Teknotherm Marine A/S Fournais AS Enrumvej 7 DK-2942 Skodsborg DENMARK Telephone: +45-42 89 04 45 Telefax: +45-42 89 42 25 Email: [email protected] Contact person: Peter Fournais www.fournais-ing.dk Preferred Makers represented: Brunvoll A.S FPS-Corpus Christi 4221 Beacon Street US-TX 78405 Corpus Christi UNITED STATES Telephone: (361) 289-9102 Telefax: (361) 289-1421 Preferred Makers represented: Hansen Protection AS FPS-Houston 8050 Harrisburg Blvd. US-TX 77012 Houston UNITED STATES Telephone: (713)-924-9600 Telefax: (713) 923-6272 Email: [email protected] www.fps-usa.com Preferred Makers represented: Hansen Protection AS

471_512_SR_Alf_2016.indd 481 07.08.2016 11:47:26


482

FPS-New Orleans 821 Industry Road US-LA 70062 Kenner UNITED STATES Telephone: (504) 466-8003 Telefax: (504) 469-9922 Email: [email protected] Preferred Makers represented: Hansen Protection AS Fraser Pty Ltd - Perth, H.I. 27 a Stockdale Rd AU-6163 WA O’Connor AUSTRALIA Telephone: +61 8 9314 7877 Telefax: +61 8 9314 5933 Contact person: Mr. J. McDonald, Mob: +61 411 072 772 Preferred Makers represented: Teamtec A/S Fraser Pty Ltd - Sydney, H.I. 6/5 Vuko Place, Warriewood 2102 NSW PO Box 885 AU-1660 Mona Vale NSW AUSTRALIA Telephone: +61 2 9970 7322 Telefax: +61 2 9913 7207 Contact person: Mr. M. Blyth, Mob: +61 400 311 756 Preferred Makers represented: Teamtec A/S Galram Surveyors & Adjusters Ltd. P.O. Box 4094 IL-77140 ISRAEL Telephone: +972 8 856 1634 Telefax: + 972 8 853 1325 Email: [email protected] www.galram.com Preferred Makers represented: Optimarin AS

Gandara & CIA. S.A., J.L. Acebal Idigoras 2-4 ES-48002 BilbaoSPAIN Telephone: +34-4232339 Telefax: +34-4249007 Preferred Makers represented: Masto Wire Service A/S Tranberg A.S. Gellweiler Travessa De Alecrim 3-2 PT-1200 Lisboa PORTUGAL Telephone: +351 21 340 7160 Telefax: +351 21 340 7169 Contact person: Rui Texeira Preferred Makers represented: Norsafe AS GET Ltd. Business Center “GRANI”, Furazhny Pereulok, Bld 3 liter “K”, Office 413 RU-191 015 St. Petersburg RUSSIA Telephone: +7 812 449 46 26 Telefax: +7 812 449 46 43 Email: [email protected] Contact person: Kirill Golubev Preferred Makers represented: Norsafe AS Gildor United ApS Moscow RUSSIA Telephone: +7 495 913 67 10 Telefax: +7 495 913 67 14 Email: [email protected] Contact person: Olga N. Murdygina Preferred Makers represented: Norsafe AS

471_512_SR_Alf_2016.indd 482 07.08.2016 11:47:26

483


Gimex Pte. Ltd. 151 Chin Swee Road # 02-22, Manhattan House SG-169876 Singpore SINGAPORE Telephone: +65 67350278 Telefax: +65 67350279 Email: [email protected] Contact person: Mr. Henry Oh www.gimex.com Preferred Makers represented: EuroRope Marine AS Gin-A Co., Ltd. 912 Dongbu Root Bldg. 16-2, Sunae-dong, Bundang-gu, Seongnam-si KR-463-825 Gyeonggi-do KOREA, SOUTH Telephone: +82 31 711 9681/2 Telefax: +82 31 711 4230 Email: [email protected] Contact person: B.H. Lee /S.H. Jung Preferred Makers represented: Maritime Partner AS Global Mar-Tech Company Ltd. 21-25 Cheung Sha Wan Road HONG KONG Telephone: + 852 3520 4957. Mob. phone: +852 9454 3254 Telefax: +852 3520 4951 Email: [email protected] Contact person: CK Tang Preferred Makers represented: AF Offshore AeronMollier AS

GlobalSim Inc. 12577 South 265 West, Suite 3A, US-84020 Draper, Utah UNITED STATES Telephone: +1 800 979 9728 Telefax: +1 801 571 9535 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS GM Turbo D.o.o. Vukovarska 58 HR-21000 Split, Hrvatska CROATIA Telephone: +021 543 985 Email: [email protected] Contact person: Danica Griusic Preferred Makers represented: Norsafe AS Goltens Korea Room 1003, ACE Hightech 21, 1470, U-Dong, Haeundae-Gu KR-612-020 Busan KOREA, SOUTH Telephone: +82 51 744 8000 Telefax: +82 51 744 8008 Email: [email protected] Contact person: Mr. K.O. Kim, Mob: +82 10 93927441 www.goltens.com Preferred Makers represented: Teamtec A/S Goltens Singapore Pte. Ltd. 6A, Benoi Road SG-629881 Singapore SINGAPORE Telephone: +65 6861 5220 Telefax: +65 6861 1037 Email: [email protected] Contact person: Mr. Tony Chan Preferred Makers represented: Teamtec A/S

471_512_SR_Alf_2016.indd 483 07.08.2016 11:47:26


484

GTA Marine 33 Krauser Road, Downingtown US-PA 19335 Thorndale UNITED STATES Telephone: +1 610 321 0300 Telefax: +1 610 321 0609 Email: [email protected] Contact person: Mr. Gerard Bourgeault / Mob: +1 610 999 1840 www.gtamarine.com Preferred Makers represented: Teamtec A/S Hai Cheung Trading Co. (HK) Ltd. 8/F Juyang Tower, No. 1200, Pudong Avenue CN-PC 200135 Shanghai CHINA Telephone: +86 21 6888 9889 Ext. 6862 Telefax: +86 21 6329 3888 Email: [email protected] Contact person: Mr. Danny Ran - Shanghai Office www.haicheung.com Preferred Makers represented: Teamtec A/S Hai Cheung Trading Co., (HK) Ltd. RM 1706-7 Emperor Group Centre, 288 Hennessy Road Wanchai, Hong Kong CHINA Telephone: +852 2836 3936 Telefax: +852 2893 5550 Email: [email protected] Contact person: Mr. Francis Chan www.haicheung.com Preferred Makers represented: Teamtec A/S

Hansen Protection Canada Ltd. 131 Thornhill Drive CA-B3B 1S2 Dartmounth, N.S CANADA Telephone: +1-902-468 6382 Telefax: +1-902-468 2367 Preferred Makers represented: Hansen Protection AS Headland Engineering Pty Ltd 666, Pittwater Road, Brookvale AU-NSW 2100 Sydney AUSTRALIA Telephone: +61-2-9939 1966 Telefax: +61-2-9938 6210 Contact person: G. Mannasz Preferred Makers represented: Finnøy Gear & Propeller AS Health Lead Development Ltd. - Head-Office Room B, 12th Floor, Guangdong Investment Tower, 148 Connaught Road Central Hong Kong CHINA Telephone: +852-2858 0012 Telefax: +852-2559 6731 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd. - Wuhan Rm 21-1-202 Jinchang Garden, 101 Zhuodaoquan Road, Hongshan District CN-430079 Wuhan CHINA Telephone: +86 27 8761 98 08 Telefax: +86 27 8761 98 08 Email: [email protected] Preferred Makers represented: Harding Safety AS

471_512_SR_Alf_2016.indd 484 07.08.2016 11:47:26

485


Health Lead Development Ltd., Dalian Office 23A Li Yuan Mansion, No. 16-18 Ming Ze Street Zhongshan District Dalian CHINA Telephone: +86 411 82825205 Telefax: +86 411 82803992 Email: [email protected] Contact person: Michael Tse/P.X. Song www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Guangzhou office 30F Tai Fu Center, Tai Hong Plaza, No. 111 Tai Kang Road CN-510115 Guangzhou CHINA Telephone: +86 20 83221115 Telefax: +86 20 831221110 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Shanghai Office Rm 801 King tower, No 28 Xinjingqiao, Pudong CN-201206 Shanghai CHINA Telephone: +86 21 3382 14 60 Telefax: +86 21 3382 14 65 Email: [email protected] Contact person: Mr. Lu Yi www.health-lead.com Preferred Makers represented: Harding Safety AS

Health Lead Development Ltd., Tianjin Office Room 501, Flat 23# Tai Feng Jia Yuan, No 99 Fourth avenue TEDA CN-300457 Tianjin CHINA Telephone: +86 22 66221118 Telefax: +86 22 66221118 Email: [email protected] Contact person: C.L. Zhang www.health-lead.com Preferred Makers represented: Harding Safety AS Heidemann Ing. & Handelsfirma ApS Sødergade 242 DK-9900 Fredrikshavn DENMARK Telephone: +45 98 422 030 Telefax: +45 98 438 890 Email: peer.heidemann.dk Contact person: Peer H. Heidemann Preferred Makers represented: Optimarin AS Henriksen Y. Cia. S.A., Gunnar Melian 3838 AR-1430 Buenos Aires ARGENTINA Telephone: +54 1 541 0969 Telefax: +54 1 541 4411 Contact person: Clas Henriksson Preferred Makers represented: Norsafe AS

471_512_SR_Alf_2016.indd 485 07.08.2016 11:47:26


486

Hermes, Ing. Lorenzo Ermini Via Trento 43/2 IT-16145 Genova ITALY Telephone: +39 010 3622 525 Telefax: +39 010 3169 58 Email: [email protected] Contact person: Lorenzo Ermini Preferred Makers represented: Norsafe AS Hermont Marine Inc. 8080 Rte. Transcanadienne, CA-QC, H4S 1 M5 CANADA Telephone: +1 514-856-1212 Email: [email protected] www.hermont.com Preferred Makers represented: Teamtec A/S Heros R. Zone Industrielle, Baic de Numbo-Lots 6 et 7 BP3267 NC-98846 Noumea NEW CALEDONIA Telephone: +687 28 59 69 Telefax: +687 25 22 47 Preferred Makers represented: Norsafe AS Hodt Korrosschutz GmbH Flurstr. 8 DE-21465 Wentorf Hamburg GERMANY Telephone: +49 40 72 90 40 30 Telefax: +49 40 72 90 40 59 Preferred Makers represented: Masto Wire Service A/S

Holland Safety Energieweg 2c NL-1785 AD Den Helder NETHERLANDS, THE Telephone: 223 614 999 Email: [email protected] www.holland-safety.nl Preferred Makers represented: Hansen Protection AS Hua Hai Equipment & Engineering Co. Ltd Room 2018, Block B, Sea View Estate, 4-6 Watson Road North Point, Hong Kong CHINA Telephone: +852-8251 7783 Telefax: +852-2851 7522 Email: [email protected] Contact person: Kenneth Jo www.huahai.com.hk Preferred Makers represented: Maritime Partner AS Hydroid Europe Unit 3, Basepoint Enterprise Centre Anderson’s Road GB-SO14 5FE Southampton UNITED KINGDOM Telephone: +44-2380-682-388 Telefax: +44-2380-682-389 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Hydroid Inc. 6 Benjamin Nye Circle US-MA 02559-4900 Pocasset UNITED STATES Telephone: +1 508 563 6565 Telefax: +1 508 563 3445 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

471_512_SR_Alf_2016.indd 486 07.08.2016 11:47:26

487

SALES REPRESENTATIVES - Alphabetical List Ilaa Maldives Pte. Ltd. Onugas Magu MV-10637 (M2-24), Hulhumale’ MALDIVES Telephone: +960 335 5751 Telefax: +960 31 07 02 Email: [email protected] Contact person: Mr. Adnan Moosa www.ilaamaldives.com Preferred Makers represented: Teamtec A/S Ilkfer Group Guzelyali Mah.Sahil Bulvari, Cad.Deniz Sokak No. 54/2, Guzelyali/Pendik Istanbul TURKEY Telephone: +90 216 493 09 62 Telefax: +90 216 493 09 69 Email: [email protected] www.uniservice.com.tr Preferred Makers represented: Optimarin AS IMC Comercio Int. c Repr. Ltda Rua Visconde do Piraja 414/311, 40, Ipanema BR-22410-002 Rio de Janeiro BRAZIL Telephone: +55 21 2522 0696 Telefax: +55 21 2522 6945 Email: [email protected] Contact person: Kenneth Mill Preferred Makers represented: Norsafe AS

Imex Marine D.o.o. Dragonja 1 HR-52100 Pula CROATIA Telephone: +385 52 502 366 Telefax: +385 52 502 330 Email: [email protected] Contact person: Mr. Mladen Radolovic Preferred Makers represented: Brunvoll A.S Implementos y Servicios Electrónicos SA de CV (ISEL) Via Lopez Mateos 128, Col Jacarandas MX-54050 Tlalnepantla, Estado de México cp MEXICO Telephone: +52 55 5398 8088 Telefax: +52 55 5397 3985 Email: [email protected] Preferred Makers represented: Tranberg A.S. IMS Griffin ul. Luzycka 2A PL-81-537 Gdynia POLAND Telephone: (058) 620 52 63 Email: [email protected] www.griffin-marine.pl Preferred Makers represented: Hansen Protection AS Imtech Marine Germany GmbH Albert Einstein - Ring 6 DE-22 761 Hamburg GERMANY Telephone: +49-40-8997215 Telefax: +49-40-89972199 Contact person: Michael Miersen Preferred Makers represented: Comrod Communication A/S

471_512_SR_Alf_2016.indd 487 07.08.2016 11:47:26


488

International Safety Products Ltd Orrell Mount, 159 Hawthorne Road GB-L20 6JU Bootle UNITED KINGDOM Telephone: +44 (0)151 922 2202 Email: [email protected] www.ispl.co.uk Preferred Makers represented: Hansen Protection AS Interprombribor 6th floor No. 10, Zvyozdnyi bulvar 21 RU-129085 Moskau RUSSIA Telephone: +7 495 6163252 Telefax: +7 495 6163464 Email: [email protected] Preferred Makers represented: Tranberg A.S. Intra Mare Greece 4, Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 210 429 3843 Telefax: +30 210 429 3845 Email: [email protected] Contact person: George Gerassimou www.intramare.gr Preferred Makers represented: Norsafe AS Teknotherm Marine A/S Intra Mare Hellas 4 Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 10 4293 843 Telefax: +30 10 4293 845 Email: [email protected] Contact person: Mr. George Gerassimou Preferred Makers represented: Libra-Plast AS

Issaquah Trading 4622 174th Pl. Se. US-98006 Bellevue UNITED STATES Telephone: +1 425-830-4154 Email: [email protected] Preferred Makers represented: Teamtec A/S Issaquah Trading 4622 174th PL SE US-WA 98006 Bellevue UNITED STATES Telephone: +1 425 830 4154 Email: [email protected] Contact person: Mr. Per N. Thomassen Preferred Makers represented: Teamtec A/S Jaeun Corporation 648-8, Moonhyun-2dong KR-608-042 Pusan KOREA, SOUTH Telephone: +82 51 631 7398 Telefax: +82 51 647 7515 Contact person: Chae Kyu Lee Preferred Makers represented: Comrod Communication A/S Jason Electronics (Pte) Ltd. Blk 194 Pandan Loop #06-05, Pantech Industrial Complex SG-128383 Singapore SINGAPORE Telephone: +65 8720211 Telefax: +65 8721800 Contact person: Ronald Tan Preferred Makers represented: Comrod Communication A/S

471_512_SR_Alf_2016.indd 488 07.08.2016 11:47:26

489


Jason Offshore Equipment Co.,ltd 33I, New Time Plaza, Nanshan, Shenzhen Guangdong CHINA www.jasonoffshore.com Preferred Makers represented: Hansen Protection AS Kaminco Overseas Inc. Pireaus Branch: 57 Aki Miaouli P.O. Box 80 222 GR-18510 Piraeus GREECE Telephone: +301 45 28 240 Telefax: +301 42 94 887 Email: [email protected] Contact person: Sotirios Kaminis Preferred Makers represented: Finnøy Gear & Propeller AS Kas Pazariama A.S. Sedat Simavi Sokak TR-52/2 Cankaya Ankara TURKEY Telephone: +90 312 441 8385 Telefax: +90 312 441 4336 Email: [email protected] Preferred Makers represented: Tranberg A.S. KDU Worldwide Technical Services Fzc P6-171, Saif Zone P.O. Box #9567 Sharjah UNITED ARAB EMIRATES Telephone: +971-6-5575480 Telefax: +971-6-5575490 Email: [email protected] Contact person: Ralph Cabral, Director Technical Preferred Makers represented: AF Offshore AeronMollier AS

Killing Agencies and Marketing Limited Plot no. 7, Chandivali Farm Road, Chandivali IN-400 072 Mumbai INDIA Telephone: +91 22 2857 3581 Telefax: +91 22 2857 3549 Email: [email protected] Contact person: Pradeep M Mankame www.kaml.in Preferred Makers represented: Maritime Partner AS Kongsberg GeoAcoustics Ltd Shuttleworth Close, Gapton Hall Industrial Estate GB-NR31 0NQ Great Yarmouth UNITED KINGDOM Telephone: +44 1493 600 666 Telefax: +44 1493 651 100 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg GeoAcoustics Pte Ltd. 30 Loyang Way, #07-12 SG-508769 Singapore SINGAPORE Telephone: +65 6546 3687 Telefax: +65 6546 3690 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime - Training center Avenida Hildebrando Alves Barbosa 3.700 - Nossa, Senhora da Ajuda BR-RJ 27950-010 Macaé BRAZIL Telephone: +55 22 3311 8121 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

471_512_SR_Alf_2016.indd 489 07.08.2016 11:47:26


490

Kongsberg Maritime China (Jiangsu) Ltd. 3F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983333 Telefax: +86-511-81983399 Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China (Shanghai) Ltd. - Site Office Rm 2002, North Tower, 3 Huaqiang Road CN-510623 Guangzhou CHINA Telephone: +86-188-19825000 Telefax: +86-20-38039496 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China (Shanghai) Ltd. - Site Office RM 2703A/B, 25 Tongxing Street CN-116001 Dalian CHINA Telephone: +86-188-41181669 Telefax: +86-411-39869768 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China Ltd. No.6 Building, 401 Chuanqiao Road CN-201206 Shanghai CHINA Telephone: +86-21-31279888 Telefax: +86-21-31279555 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime China Zhenjiang Ltd. 1-2F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983222 Telefax: +86-511-81983299 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime do Brasil S.A. Av. Rio Branco 173 - 16 andar , Centro BR-BR-20040-007 Rio de Janeiro BRAZIL Telephone: +55 21 2240 9402 Telefax: +55 21 2262 8749 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Hellas SA 7 Gravias street GR-7 Gravias street Piraeus GREECE Telephone: +30 210 4117200 Telefax: +30 210 4117200 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Holland BV Edisonweg 10 NL-3208 kb Spijkenisse NETHERLANDS, THE Telephone: +31 181 623 611 Telefax: +31 181 626 162 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

471_512_SR_Alf_2016.indd 490 07.08.2016 11:47:26

491


Kongsberg Maritime Inc. 5373 W. Sam Houston Parkway N, Suite 200 US-TX 77041 Houston UNITED STATES Telephone: +1 713 329 5580 Telefax: +1 713 329 5581 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Inc. 150 James Drive East, Suite 160 US-LA 70087 Saint rose UNITED STATES Telephone: +1 504 712 2799 Telefax: +1 504 712 7986 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime India Private Ltd. Plot No 14,Sector 24,Vashi-Turbhe,, Sion-Panvel Highway IN-400 705 Navi Mumbai INDIA Telephone: +91 22 4119 0101 Telefax: +91 22 4119 0111 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. #1101-Harbor Tower, 113-1, Nampodong 6-Ga, Jung-Gu KR-600-046 Busan KOREA, SOUTH Telephone: +82-51-242-9933 Telefax: +82-51-242-9934 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime Korea Ltd. - Site Office 3F,181-23,Seobu-dong, Dong-gu KR-681-807 Ulsan KOREA, SOUTH Telephone: +82 52 236 0869 Telefax: +82 52 236 0881 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 3F,1869, Yongdang-ri, Samho-eup, Youngam-gun KR-526-896 Jellanam-do KOREA, SOUTH Telephone: +82 61 461 0160 Telefax: +82 61 461 0160 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 4F, Mariposa Bldg 531-17, Okpo-dong KR-656-906 Geoje, Gyeongsangnam-do KOREA, SOUTH Telephone: +82 55 687 4561 Telefax: +82 55 687 4661 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 2F, Artvil Bldg 1198, Jangpyung-ri, Shinhyun-eup KR-656-808 Geoje, Gyeongsangnam-do KOREA, SOUTH Telephone: +82 55 633 7061 Telefax: +82 55 633 7051 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

471_512_SR_Alf_2016.indd 491 07.08.2016 11:47:26


492

Kongsberg Maritime Ltd Campus 1, Aberdeen Science & Tecnology Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 12 24 22 65 00 Telefax: +44 12 24 22 65 01 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd Campus 1, Aberdeen Innovation Park, Balgownie, Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. Airport Industrial Estate, Wick GB-KW1 4QS Caithness UNITED KINGDOM Telephone: +44 1 955 603 606 Telefax: +44 1 955 607 520 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. 11 The Briars Waterberry Drive, Waterlooville GB-PO7 7YH Portsmouth UNITED KINGDOM Telephone: +44 023 9224 7800 Telefax: +44 023 9224 7808 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime Ltd. 261 Brownlow Avenue, Dartmouth CA-B3B 2B6 Nova Scotia CANADA Telephone: +1 902 468 2268 Telefax: +1 902 468 2217 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. - Offshore Campus 1 , Aberdeen Innovation Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Mexico S.A. DE C.V. Av. La Marigalante 311-31, Boca Del Rio MX-94298 Veracruz MEXICO Telephone: + 52 229 921 7708 Telefax: +(52) 229 197 1198 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Middle East DMCCO Dubai Investment Park, Falcon House Dubai UNITED ARAB EMIRATES Telephone: +971-4-8991800 Telefax: +971-4-8991801 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

471_512_SR_Alf_2016.indd 492 07.08.2016 11:47:26

493


Kongsberg Maritime Poland Sp. z o.o. Ul. Ziemowita 10d PL-71-717 Szczecin POLAND Telephone: +48 91 459 9300 Telefax: +48 91 459 9399 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Pte. Ltd. 81 Toh Guan Rd East, #04-01/02 Secom Centre SG-608606 Singapore SINGAPORE Telephone: +65 6411 6400 Telefax: +65 6411 6401 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime Simulation 139 Water Street, Suite 902, CA-NF A1C 1B2 St.John’s, NL CANADA Telephone: +1 709 579 4859 Telefax: +1 709 579 4852 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Simulation Inc. 70 Essex Street P.O. Box 180 US-CT 06388-0180 West Mystic UNITED STATES Telephone: +1 860 536 1254 Telefax: +1 860 536 0923 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime Srl Via Cornelia 498, Block 2 - First floor IT-00166 Rome ITALY Telephone: +39 06 615 224 76 Telefax: +39 06 615 295 13 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Tech LLC Ul. Rizhskaya, Building 1, Office 407 RU-195196 St. Petersburg RUSSIA Telephone: +7 812 495 56 06 Telefax: +7 812 495 56 06 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Training & Simulation Centre 15 Abercrombie Court, Prospect Road, Arnhall Business Park GB-AB32 6FE Westhill, Aberdeen UNITED KINGDOM Telephone: +44 1224 617 670 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Mesotech Ltd. 1598 Kebet Way, Port Coquitlam CA-V3C 5M5 British Columbia CANADA Telephone: +1 604 464 8144 Telefax: +1 604 941 5423 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

471_512_SR_Alf_2016.indd 493 07.08.2016 11:47:26


494

Kongsberg Process Simulation Pvt. Ltd 6th floor, Plot no - 29-32, 36-37, Pudhari Bhavan, Sector - 30A, Vashi IN-400 705 Navi Mumbai INDIA Telephone: +91 22 4157 5200 Telefax: +91 22 4157 5250 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kuwait Development & Trading Co. Shuwaikh Industrial Area - Jahra Road-Kuwait P.O. Box 707 KW-13008 Safat KUWAIT Telephone: +965 4815517 Telefax: +965 4819059 Email: [email protected] Contact person: Idris Taher www.kdtco.net Preferred Makers represented: Maritime Partner AS Kyoei Marine Co., Ltd. Yokohama JAPAN Email: [email protected] Preferred Makers represented: EuroRope Marine AS Long Ji Hong Kong Industrial Co. Ltd. 1202 China Merchant Plaza (East Building), No. 333 Chengdu Road (North) CN-200041 Shanghai CHINA Telephone: +86 21 3210 0553 Preferred Makers represented: Optimarin AS

LSC Multech Co., Ltd. 7F, No. 431, Fu-Hsing N Rd,, Songshan District TW-TW 105 Taipei TAIWAN Telephone: Songshan District Telefax: +886-2-8712-2557 Email: [email protected] Contact person: Mrs. Joyce Chen / Ronnie Chen www.lscmultech.com.tw Preferred Makers represented: Teamtec A/S Macnor Marine Consultoria Empresarial Ltda. Av. Evandro Lins e Silva, 840, Barra da Tijuca BR-Sl 815/816 Rio de Janeiro BRAZIL Telephone: +55 21 22 20 54 13 Telefax: +55 21 2262 3174 Email: [email protected] Contact person: Pedro Guimaraes www.macnor.com.br Preferred Makers represented: AF Offshore AeronMollier AS Brunvoll A.S Maritime Partner AS Teamtec A/S Tranberg A.S. Marine & Offshore Equipment GmbH & Co Røntgenstrasse 6 DE-21465 Reinbek GERMANY Telephone: +49 40 650 456-0 Telefax: +49 40 650 456-11 Email: [email protected] Contact person: Tim Kutscher www.moe-hh.de Preferred Makers represented: Norsafe AS Teamtec A/S

471_512_SR_Alf_2016.indd 494 07.08.2016 11:47:26

495


Marine Bridge & Navigation Systems 19, Promyshlennaya str. RU-198099 St. Petersburg RUSSIA Telephone: +7 812 320 3840 Telefax: +7 812 320 3848 Email: [email protected] Preferred Makers represented: Tranberg A.S. Marine EQ Via Cassa di Risparmio 6 IT-34121 Trieste ITALY Telephone: +39 040 660 550 Telefax: +39 040 660 620 Email: [email protected] Contact person: Ms. Annamaria Zangrilli Preferred Makers represented: Brunvoll A.S Marine Propulsion Systems Admiral Business Centre, office 459, Na6, Oguodongo Kan 118 RU-190005 St. Petersburg RUSSIA Telephone: +7 812 441 3807 Telefax: +7 812 441 38 09 Email: [email protected] Contact person: Sergey B. Sumkin Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Marine Systems (UK) Ltd. 18 Heron Close, Sawbridgeworth GB-CM21 0BB Herts UNITED KINGDOM Telephone: +44 7889 0287 29 Contact person: Basil Black Preferred Makers represented: Finnøy Gear & Propeller AS

Maritim AB, OY Veneentekijäntie 1 FI-00210 Helsinki 21 FINLAND Telephone: +358 (0)207 651 80 Email: [email protected] www.maritim.fi Preferred Makers represented: Hansen Protection AS Maritime Partner Asia Pte Ltd. Pioneer Lot, 31B Benoi Road SG-627780 Singapore SINGAPORE Telephone: +65 9820 1095 Telefax: +65 6795 8908 Contact person: Arne Dybvik Preferred Makers represented: Maritime Partner AS Marsys SA Avda. General Peron, 8-7 B ES-28020 Madrid SPAIN Telephone: +34 91 572 32 19 / 572 32 61 Telefax: +34 91 572 32 13 Email: [email protected] www.marsys.org Preferred Makers represented: Norsafe AS Optimarin AS Teamtec A/S

471_512_SR_Alf_2016.indd 495 07.08.2016 11:47:26


496

Martrade Srl. 13, Domneasca Street RO-6200 Galatzi ROMANIA Telephone: +40-236 460 814 Telefax: +40-236 436 930 Email: [email protected] Contact person: Marian Vasile Preferred Makers represented: AF Offshore AeronMollier AS Finnøy Gear & Propeller AS Teamtec A/S Meson AB Kullgårdsvägen 27 SE-312 34 Laholm SWEDEN Telephone: +46 430 295 00 Telefax: +46 430 171 91 Email: [email protected] Contact person: Bengt-Olof Wesslén www.meson.se Preferred Makers represented: Meson AS Metalock Brazil Ltda. Rua Visconde do Rio Branco 20/26 Santos - SP BRAZIL Telephone: +55 13 3226 4686 Telefax: +55 13 7804 4977 Email: [email protected] Preferred Makers represented: Optimarin AS MG Insulation & Marine Service Pte Ltd 4 Soon Lee Road SG-628071 Singapore SINGAPORE Telephone: +65 6264 0868 Telefax: +65 6264 0878 Email: [email protected] Preferred Makers represented: Optimarin AS

Mischling Engineering Pte LTD TradeHub 21, 18 Boon Lay way, #02-111 SG-609966 Singapore SINGAPORE Telephone: +65 68 46 81 80 Telefax: +65 68468011 Email: [email protected] Contact person: Reeve Tan Preferred Makers represented: Parat Halvorsen A-S MRH Marine Ltd. No. 3 Crofthead Mill, Lochlibo Road, Neilston GB-G78 3NA Glasgow UNITED KINGDOM Telephone: +44-141 880 6939 Telefax: +44-141 881 3600 Email: [email protected] Contact person: Mr. Bill Higginbotham Preferred Makers represented: Libra-Plast AS MTS Co., Ltd (Marine Trade Services Ltd) R 1207 Vuon Xuan Building, 71 Nguyen Chi Thanh Street Hanoi VIETNAM Telephone: +84 4 62 75 86 22 Telefax: +84 4 62 75 86 23 Email: [email protected] Contact person: Mr. Hoang Tuan Anh Preferred Makers represented: Libra-Plast AS

471_512_SR_Alf_2016.indd 496 07.08.2016 11:47:26

497


MTS International JSC R1207 - Vuon Xuan Bld., 71 Nguyen Chi Thanh Str. Hanoi VIETNAM Telephone: +84 4 7623499. Telefax: +84 4 7623476 Email: [email protected] Contact person: Mr. Hoang Tuan Anh Preferred Makers represented: AF Offshore AeronMollier AS Teamtec A/S Tranberg A.S. Narval D.o.o. J.P Kamova 95 b, HR HR-51000 Rijeka CROATIA Telephone: +385 51 400 617 Email: [email protected] www.narval.hr Preferred Makers represented: Optimarin AS NAUTILUS Marine Service GmbH Alter Postweg 24 DE-21614 Buxtehude GERMANY Telephone: +49 4161 86625 0 Email: [email protected] www.nautilus-gmbh.com Preferred Makers represented: Hansen Protection AS Naval Motor S.A. Buenos Aires ARGENTINA Telephone: +54 11 4796 1777 Telefax: +54 11 4796 1888 Email: [email protected] Contact person: Jose Maria Valente Preferred Makers represented: Maritime Partner AS

Nemomarin TIC. MÜH. Denizcilik A.S. Aydintepe Mah. Sahilyolu Bulvari, Alize Is Merkezi No.191/56 TR-34947 Tuzla-Istanbul TURKEY Telephone: +90 216 392 92 02 Telefax: +90 216 392 92 05 Email: [email protected] Contact person: Mete Tarihmen www.nemomarin.com Preferred Makers represented: Teamtec A/S NHP Electrical engineering Products Pty. Ltd. 43-67 river Street AU-3112 Richmond, Victoria AUSTRALIA Telephone: +61 3 94292999 Telefax: +61 3 94291075 Email: [email protected] Preferred Makers represented: Tranberg A.S. Nippon Engineering & Trading Room 502 Nippon-Bashi Residenc, 2-4-21 Kouzu, Chuo-Ku, JP-542-007 Osaka JAPAN Telephone: +81 66212 0175 Telefax: +81 66212 0176 Email: [email protected] Contact person: H. Matsumoto Preferred Makers represented: Maritime Partner AS Noko Land & Marine Irun SPAIN Email: [email protected] www.nokolandmarine.com Preferred Makers represented: EuroRope Marine AS

471_512_SR_Alf_2016.indd 497 07.08.2016 11:47:26


498

Noreq Acta A/S Emil Neckelmanns Vej 15 K DK-5220 Odense SØ DENMARK Telephone: +45 63 17 61 00 Telefax: +45 66 15 35 57 Email: [email protected] Preferred Makers represented: Harding Safety AS Noreq Do Brazil Innovation Norway, Rua Lauro Muller,116 / suite 2405, Torre do Rio Sul / Botafogo Rio de Janeiro BRAZIL Telephone: (21) 3544 0022 Telefax: (21) 82 59 46 86 Email: [email protected] Preferred Makers represented: Harding Safety AS NOREQ FZE Office No. 6WA 633, Dubai Airport Freezone PO Box : 121707 Dubai UNITED ARAB EMIRATES Telephone: +971 4 2602748 Telefax: +971 4 2602750 Email: [email protected] Preferred Makers represented: Harding Safety AS Noreq LLC 3410 W. Dallas Ste. 239 US-TX 77019 Houston UNITED STATES Telephone: +1 713 589 3161 Email: [email protected] Preferred Makers represented: Harding Safety AS

NOREQ Pte Ltd No. 232, Tuas South Avenue 2, West Point BizHub SG-637221 Singapore SINGAPORE Telephone: +65 6896 8027 Email: [email protected] Preferred Makers represented: Harding Safety AS Noreq Sp. z o.o Unii Europejskiej 8, PL-86-050 Solec Kujawski POLAND Telephone: +48 52 38 70 608 Email: [email protected] Preferred Makers represented: Harding Safety AS Norinco Private Limited INDIA Telephone: +91 22 2757 1242 Email: [email protected] Preferred Makers represented: Anda-Olsen AS Norinco Private Limited (Kolkatta) 14 Netaji Subhas Road, 2nd Floor P.O. Box No 2211 Kolkatta IN-700 001 West Bengal INDIA Telephone: +91 33 22 21 2452 / 22436094 Telefax: +91 33 22 20 3361 Email: [email protected] Contact person: Mr. Narayan Jaikishen Preferred Makers represented: Teamtec A/S

471_512_SR_Alf_2016.indd 498 07.08.2016 11:47:27

499


Norinco Private Limited (Mumbay) #301/302, 3rd Floor, Orbit Plaza (Behind Chaitanya Towers), New Prabhadevi Road, Prabhadevi P.O. Box 871 IN-400 001 Mumbai INDIA Telephone: +91 22 2438 9712 - 9713 - 9717 Telefax: +91 22 2438 9715 Email: [email protected] Contact person: Mr. George Mathew, Managing Director www.norinco.co.in Preferred Makers represented: Teamtec A/S Norinco Private Ltd. #301/302, 3rd Floor, Orbit Plaza, New Prabhadevi Road, Prabhadevi IN-400 025 Mumbai INDIA Telephone: +91 22 2438 9712/13/17 Telefax: +91 22 2438 9715 Email: [email protected] Contact person: Nandan Tavanandi www.norinco.co.in Preferred Makers represented: Norsafe AS Norinco PVT Ltd. No. 302/43, Dr. C.V.S. Corea MW, Victory Gardens Hokandara SRI LANKA Telephone: 011 215 6629 Email: [email protected] www.norinco.co.in Preferred Makers represented: Teamtec A/S

Norrkust Marina Varvs AB Industriområdet SE-952 95 Båtskärnäs SWEDEN Telephone: 0923-67 02 72 Email: [email protected] www.norrkustmarina.se Preferred Makers represented: Hansen Protection AS North West Service Ltd. Tavricheskaya str. 19-13 RU-191015 St. Petersburg RUSSIA Telephone: +7 812 2757832 Telefax: +7 812 320 014 6 Email: [email protected] Contact person: Mr. Pavel Lastochkin, Director www.nws-spb.ru Preferred Makers represented: Teamtec A/S Ocean Fair International LLC Dubai Investments Park - Phase II, Near Abu Dhabi Pipe Factory (ADPF) Dubai UNITED ARAB EMIRATES Telephone: +971 4 8849555 Telefax: +971 4 8849557 Email: [email protected] www.oceanfair.com Preferred Makers represented: EuroRope Marine AS Ocean Power & Equipment Co. 1140 Bloomfield Avenue, Suite 107 US-NJ 07006 West Caldwell UNITED STATES Telephone: +1 973 575 5775 Telefax: +1 973 575 5850 Email: [email protected] Preferred Makers represented: Optimarin AS

471_512_SR_Alf_2016.indd 499 07.08.2016 11:47:27


500

Oceanist Deniz Araclari Muh. Mum. San ve Tic. LTD STI. Kavacik Mah. F.S.M. Cad., Yayabeyi Sk. No:2/13 TR-34810 Beykoz / Istanbul TURKEY Telephone: +90 216 701 19 03 Telefax: +90 216 701 19 23 Email: [email protected] Contact person: Mr. Umur CULHA www.oceanist.com Preferred Makers represented: Libra-Plast AS Oceanist Engineering Ltd. Kavacik Mah. F.S.M. Cad. Yayabeyi Sk. No.: 2/13 TR-34810 Beykoz - Istanbul TURKEY Telephone: +90 216 701 1903 Telefax: +90 216 701 1923 Email: [email protected] Contact person: Umur Culha Preferred Makers represented: Brunvoll A.S Parat Halvorsen A-S Omega SSP Calle 61 Entre Av. 3E Y 3F, No. 3E-49, Sector Las Mercedes, Maracaibo 4002 Zulia VENEZUELA Telephone: +58 261 792 2616 Telefax: +58 261 792 5268 Email: [email protected] Contact person: Mr. John Ketchum Preferred Makers represented: Norsafe AS

Onursan Co. Ltd. Icmeler, Rauf Orbay Cad., Gul Sok. No. 8 Turzla - Istanbul TURKEY Telephone: +90 216 395 82 27 Telefax: +90 216 395 04 60 Email: [email protected] Contact person: Mr. Barbaros Onur www.onursan.net Preferred Makers represented: Norsafe AS Parat Korea Centum Class one, Rm. 1413, Haeunde KR-612-050 Busan KOREA, SOUTH Telephone: +82 10 3189 2916 Telefax: +82 51 783 2916 Email: [email protected] Contact person: S. H. Oh Preferred Makers represented: Parat Halvorsen A-S Pasch Capitán Haya 9 ES-28020 Madrid SPAIN Telephone: +34 91 598 37 77 Telefax: +34 91 555 13 41 Email: [email protected] Contact person: Juan Antonio Azpiazu www.pasch.es Preferred Makers represented: Maritime Partner AS Pasch Y Cia Capitan Haya 9 ES-28020 Madrid SPAIN Telephone: +34 91 598 37 60 Telefax: +34 91 555 13 41 Contact person: Juan Antonio Azpiazu Preferred Makers represented: Parat Halvorsen A-S

471_512_SR_Alf_2016.indd 500 07.08.2016 11:47:27

501

SALES REPRESENTATIVES - Alphabetical List Petroleum Technology Co. W.L.L. 8th Floor, Toyota Tower P.O. Box 16069 Doha QATAR Telephone: +974 441 96 03 Telefax: +974 441 96 04 Email: [email protected] Contact person: Mr. Jassim Jacob www.petrotec.com.qa Preferred Makers represented: Norsafe AS Phong Viet Co. Ltd. 45 Road No. 32, Tanphong Ward, District 7 HoChiMinh City VIETNAM Telephone: +84 8 377 17 179 Telefax: +84 8 377 15 791 Email: thuan2phongvieco.com Contact person: Tran Dinh Thuan www.phongvietco.com Preferred Makers represented: Norsafe AS Pilot Marine 2751 Parsons Rest US-FL 32309 Talahassee UNITED STATES Telephone: (850) 893-5730 Telefax: (850) 668-0822 Email: [email protected] Contact person: Mr. Jon Denton Smith Preferred Makers represented: Comrod Communication A/S

PT. Assindo Perniagaan Internasional (API) Victoria Centre 3rd Floor, Jl. Sultan Hasanuddin No. 47-51 P.O. Box 4051 ID-12160 Jakarta INDONESIA Telephone: +62 21 72 55541 Telefax: +62 21 72 55546 Email: [email protected] Contact person: Mr. Bachtiar Sonda and Mr. Arnold Karauwan Preferred Makers represented: Teamtec A/S Quicklog Lda Casais do Chafariz 28 PT-2565-774 Turcifal PORTUGAL Email: [email protected] Preferred Makers represented: Optimarin AS Radio Holland Belgium NV Noordersingel 17 BE-2140 Deurne (Antwerp) BELGIUM Telephone: +32-3-3201711 Telefax: +32-3-3662470 Contact person: Mr. Leo van Bulck Preferred Makers represented: Comrod Communication A/S Radio Holland BV 8A Tuas Avenue 12 SG-2263 Singapore SINGAPORE Telephone: +65-8622218 Telefax: +65-8622430 Contact person: Mr. Danny Tan Preferred Makers represented: Comrod Communication A/S

471_512_SR_Alf_2016.indd 501 07.08.2016 11:47:27


502

Radio Holland Hong Kong 806 Join in Hang Sing Centre, 71-75 Container Port Road Kwai Chung N.T., Hong Kong CHINA Telephone: +8522-4239007 Telefax: +8522-34805898 Contact person: Stephen Chan Preferred Makers represented: Comrod Communication A/S Radio Holland Netherlands B.V. Eekhoutstraat 2 NL-3087 AB Rotterdam NETHERLANDS, THE Telephone: +31 10 4283344 Telefax: +31 10 4281498 Contact person: Mr. Jan Dielemann Preferred Makers represented: Comrod Communication A/S Radio Holland USA 8943 Gulf Freeway US-TX 77017 Houston UNITED STATES Telephone: +1-713-9433325 Telefax: +1-713-9433802 Email: [email protected] Contact person: Johnny Hamby Preferred Makers represented: Comrod Communication A/S Safety Marine Autralia Pty. Ltd. 37 Levanswell Road, Moorabbin AU-3189 Victoria AUSTRALIA Telephone: +613 9555 5211 Telefax: +613 9553 4380 Preferred Makers represented: Hansen Protection AS

Sang Myung Trading Co., Ltd. #1935, 21 Cebtury O/T, 55-1-Daeyeon-Dong Nam-Ku Pusan KOREA, SOUTH Telephone: +82 51 610 1211 Telefax: +82 51 610 1215 Email: [email protected] Contact person: H.T. Kim Preferred Makers represented: Libra-Plast AS SBS Ltd. Obvodniy canal, 138-96, office 447 RU-190020 St.Petersburg RUSSIA Telephone: ( 00) 7 (812) 495-94-20 Telefax: ( 00) 7 (812) 495-94-20 Email: [email protected] www.sbs-spb.ru Preferred Makers represented: Harding Safety AS Scan Pacific Marine, LLC 909 West Esplanade Avenue, Suite 104 US-LA 70065 Kenner UNITED STATES Telephone: +1 504 466 5788 Telefax: +1 504 466 5703 Email: [email protected] Contact person: Sandra Kleven www.scanpacificmarine.com Preferred Makers represented: Norsafe AS Scan, AS Fabriksvej 14 DK-6960 Hvide Sande DENMARK Telephone: +45 9731 1045 Telefax: +45 9731 1677 Email: [email protected] Contact person: Michael Vejlgaard Preferred Makers represented: Parat Halvorsen A-S

471_512_SR_Alf_2016.indd 502 07.08.2016 11:47:27

503

SALES REPRESENTATIVES - Alphabetical List Scanadria d.o.o. Trgovina i zastupanje, Stube Marka Remsa 18 HR-51000 Rijeka CROATIA Telephone: +385 51 345 007 Telefax: +385 51 345 008 Email: [email protected] Contact person: Mr. Milos Scepanovic Preferred Makers represented: Libra-Plast AS Scanadria D.O.O. Stube Marka Remsa 18 HR-51000 Rijeka CROATIA Telephone: +385 51 345007. Mob. phone: +385 98 546729 Telefax: +385 51 345008 Email: [email protected] Contact person: Milos Scepanovic Preferred Makers represented: AF Offshore AeronMollier AS Scanvik Marine Services Pte. Ltd. 31B Benoi Road, pioneer lot Singapore SINGAPORE Telephone: +65-67 95 78 87 Telefax: +65-67 95 89 08 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Anda-Olsen AS Brunvoll A.S Finnøy Gear & Propeller AS

Scanvik Marine Services Pte. Ltd. SINGAPORE Telephone: +65 6863 2070 Telefax: +65 6261 5255 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Libra-Plast AS Seaparts Molenraai 11 NL-9611 Th Sappemeer NETHERLANDS, THE Telephone: +31 598 361 665 Email: [email protected] www.seaparts.nl Preferred Makers represented: Libra-Plast AS Sedni S.A. C/. Santo Domingo s/n, Edificio Alauda L/C no. 6 ES-03005 Alicante SPAIN Telephone: +34 96 598 2193 Telefax: +34 96 592 3065 Email: [email protected] Contact person: Jose Miguel Garcia Cordoba Preferred Makers represented: Finnøy Gear & Propeller AS Harding Safety AS

471_512_SR_Alf_2016.indd 503 07.08.2016 11:47:27


504

Senak Marine Ind. and Trading Co. Ltd. Senak Denizcilik San san ve tic ltd sti, Aydintepe Mah. Sahilyolu Cad., Denizciler Tic. Mrkz. No:25 Kat:2 TR-43 34947 Tuzla Istanbul TURKEY Telephone: +90 216 392 69 92. Mob. phone: +90 532 287 54 40 Telefax: +90 216 392 65 05 Email: [email protected] person: Hasan Ufuk Gölek www.senak.com Preferred Makers represented: AF Offshore AeronMollier AS Septor OY Laurinmäenkuja 3 FI-00440 Helsinki FINLAND Telephone: +358 400 911435 Telefax: +358 20 720 9639 Email: [email protected] Contact person: Mr. Fredrik Björklöf www.septor.fi Preferred Makers represented: Brunvoll A.S Maritime Partner AS Serimatik 10-3A Ukay Boulevard, Middle Ring Road2 (MRR2) MY-68000 Ampang, Selangor Darul Ehsan MALAYSIA Telephone: +603 4161 9111 Telefax: +603 4161 9911 Email: [email protected] Preferred Makers represented: Harding Safety AS

Sernav S.P.A. Via Cornigliano 185 IT-16152 Genova ITALY Telefax: 10-418820 Contact person: Boccardo Preferred Makers represented: Masto Wire Service A/S Serviseas 35, rue du Landanier FR-35170 Bruz FRANCE Telephone: +33 6 86 04 75 38 Contact person: Jean-Michel Seinlary Preferred Makers represented: Libra-Plast AS Maritime Partner AS Seven Seas Electronics Co., Ltd. 6th Floor-1, No. 288-9, Shin Ya Road, Chien Chen District Kaohsiung TAIWAN Telefax: +886-7-815 1775 Contact person: Mr. Johnny Lin Preferred Makers represented: Comrod Communication A/S Sheerline Petrochemicals Ltd. The Hawk Building, 124, Gladstonos Street CY-3032 Limassol CYPRUS Telephone: +357 25 88 98 89 Telefax: +357 25 34 50 64 Email: [email protected] Contact person: Mr. K. Yiasoumis www.miegroup.com.cy Preferred Makers represented: Norsafe AS

471_512_SR_Alf_2016.indd 504 07.08.2016 11:47:27

505


Ships Electronic Services Ltd. Waterside Court, Neptune Close GB-ME2 4NZ Rochester, Kent UNITED KINGDOM Telephone: +44 1634-29 55 00 Telefax: +44 1634-29 55 37 Email: [email protected] Contact person: Ms. Stephen Pedgrift Preferred Makers represented: Comrod Communication A/S Ships Machinery International Inc. 12380 s.w. 130 th street US-33186 Miami, Florida UNITED STATES Telephone: +1 305 234 5693 Telefax: +1 305 234 5694 Email: [email protected] Contact person: Arthur Dewey www.shipsmachinery.com Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Simrad - Spain S.L. Partida Torres no 38, Naves 8 y 9 ES-03570 Villajoyosa - Alicante SPAIN Telephone: +34 96 681 01 49 Telefax: +34-96-685 23 04 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS SIRN srl Via Casaregis 22/1 IT-16147 Genova ITALY Telephone: +39 010 58 67 71 Telefax: +39 010 54 26 78 Email: [email protected] Preferred Makers represented: Teamtec A/S

Sirn Srl. Via Lazaretto Vecchio, 9 IT-30123 Trieste ITALY Telephone: +39 040 3042 47 Telefax: +39 040 30 81 96 Email: [email protected] Contact person: Mr. Cataldo (Dino) Gravina, President Preferred Makers represented: Teamtec A/S SKB Life Saving Equipment nv Vosseschijnstraat 44 BE-2030 Antwerp BELGIUM Telephone: +32 3 2138670 Email: [email protected] www.skblse.be Preferred Makers represented: Hansen Protection AS SMI Ships Machinery International, Inc. 13005 SW 124 Ave US-FL 33186 Miami UNITED STATES Telephone: +1 305 234 5693 Telefax: +1 305 234 5694 Email: [email protected] Contact person: Mr. Arthur Dewey Preferred Makers represented: Maritime Partner AS Smith Marine & Offshore Technology Co.,Ltd. Room 3903, Shimao Bay R3 building Zhifu District, Yantai Shandong Province CHINA Telephone: +86 (0)535 6288176-602 Telefax: +86 6288276 Contact person: Terry Tongdacheng Preferred Makers represented: Parat Halvorsen A-S

471_512_SR_Alf_2016.indd 505 07.08.2016 11:47:27


506

Springer-Ems Pte. Ltd. (Helideck Lighting) 66 Tannery Lane, #06-05 Sindo Building SG-347805 Singapore SINGAPORE Telephone: +65 67453300 Telefax: +65 67466374 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl (P) Ltd., R. 9, Arcot Road, Lakshmi Nagar, Porur IN-600 116 Chennai INDIA Telephone: +91 44 24766674 Telefax: +91 44 24767835 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl Co. Ltd., R. No. 503 Keang Nam Bldg., #163-16 Sung Nae-Dong Kang Dong-Ku, Seoul KOREA, SOUTH Telephone: +82 2 4708877 Telefax: +82 2 4718285 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl France S.A.S., R. Immeuble Naxos, 56, Rue des Hautes Patures FR-92737 Nanterre Cedex FRANCE Telephone: +33 1 41194858 Telefax: +33 1 41194859 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Stahl Inc., R. 9001 Knight Road US-TX 77054 Houston UNITED STATES Telephone: +1 713 7929300 Telefax: +1 713 7929301 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl K.K. Co. Ltd., R. Sinyurigaoka - City Bldg. 4F, 1-1, Manpukuji 1 chome, Asou JP-215-0004 Kawasaki-shi, Kanagawa JAPAN Telephone: +81 44 9592612 Telefax: +81 44 9592605 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl Ltd., R. Stahl House, 43 Elmdon Trading Estate GB-B37 7HE Birmingham UNITED KINGDOM Telephone: +44 121 767 6400 Telefax: +44 121 767 6490 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl Ltd., R. 5148-75th. Street CA-T6E-6W2 Edmonton, alberta CANADA Telephone: +1 800 782 4357 Telefax: +1 780 469 5525 Email: [email protected] Preferred Makers represented: Tranberg A.S.

471_512_SR_Alf_2016.indd 506 07.08.2016 11:47:27

507


Stahl Middle East FZE, R. P.O. Box 17784 Dubai UNITED ARAB EMIRATES Telephone: +971 4 8835855 Telefax: +971 4 8834685 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl Schaltergeräte GmbH, R. Am Bahnhof 30 DE-74638 Waldenburg GERMANY Telephone: +49 7942 943-0 Telefax: +49 7942 943-4333 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl sri socio unico, R. Via Grandi 27 IT-20068 Peschiera Borromeo (MI) ITALY Telephone: +39 2 55308024 Telefax: +39 2 51650680 Email: [email protected] Preferred Makers represented: Tranberg A.S. Stahl, S.A., Industrias sucursal em Portugal, Largo Piramide no 3 M Sala E Gab. 7 PT-2795-156 Linda-a-Velha (Conceio Oeiras), Lisboa PORTUGAL Telephone: +351 21 4145315 Telefax: +351 21 4145317 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Steinbach Ingenieurtechnik Robert Bosch Strasse 7A DE-23909 Ratzeburg GERMANY Telephone: +49 4541 802610 Telefax: +49 4541 80261 20 Email: [email protected] Contact person: Jörg Steinbach www.si-technik.de Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Stelio Bardi SRL Via delle Primule, 101 IT-16148 Genova ITALY Telephone: +39 010 3760 750 Telefax: +39 010 3760 759 Email: [email protected] Contact person: Stelio Bardi www.bardi.it Preferred Makers represented: Libra-Plast AS Optimarin AS Structor Oy Laurinmäenkuja 3 P.O. Box 299 FI-00101 Helsinki FINLAND Telephone: +358 20 7209632 Telefax: +358 20 7209639 Email: [email protected] Contact person: Fredrik Björklöf Preferred Makers represented: Parat Halvorsen A-S

471_512_SR_Alf_2016.indd 507 07.08.2016 11:47:27


508

Tamarix Marine CC t/a Sea Power Tyger Valley 7536 P.O. Box 3723 Cape Town SOUTH AFRICA Telephone: +27-21-551 9192 Telefax: +27-21-552 9326 Email: [email protected] Contact person: Piet de Klerk Preferred Makers represented: Finnøy Gear & Propeller AS Norsafe AS Teknotherm Marine A/S TBU - B.V. Seinshuiswachter 1 NL-3034 KH Rotterdam NETHERLANDS, THE Telephone: +31 10 4114614 Telefax: +31 10 1414004 Email: [email protected] Contact person: H.F. Uittenbogaart Preferred Makers represented: Teknotherm Marine A/S TBU - B.V. Technisch Bureau Uittenbogaart Brugwachter 13 NL-3034 KD Rotterdam NETHERLANDS, THE Telephone: +31 10 411 46 14 Telefax: +31 10 414 10 04 Email: [email protected] www.tbu.nl Preferred Makers represented: Optimarin AS

Technoship B V, Mariecke Siezen Socratesstraat 94 NL-7323 PH Apeldoorn NETHERLANDS, THE Telephone: +31 553 555 876 Telefax: +31 553 555 861 Email: [email protected] Contact person: Hans Siezen www.faxberoepengids.nl/72653 Preferred Makers represented: Norsafe AS Tecway (HK) Ltd. Flat 15&19, 10/F, Shatin Galleria, 18-24 Shan Mel Street, Fotan Shatin, New Territories HONG KONG Telephone: +852 2548 3118 Telefax: +852 2581 1302 Email: [email protected] Contact person: Mr. Harold Ko www.tecwayintl.com Preferred Makers represented: Brunvoll A.S Teamtec A/S Tecway International (Marine) Ltd. RM.AB, 19/F, Yu Jia Bldg., 1336 Huashan Road, DR-Code: 3114941570 CN-200052 Shanghai CHINA Telephone: +86 21 6226 5267 Telefax: +86 21 6226 5015 Email: [email protected] Contact person: Mr. Yuda Zhang www.tecwayintl.com Preferred Makers represented: Brunvoll A.S Libra-Plast AS Tranberg A.S.

471_512_SR_Alf_2016.indd 508 07.08.2016 11:47:27

509


Tecway International Ltd. Room 1904, Tower 1, Dong-Jun Plaza, 828 - 836, Dongfeng Road East CN-5100800 Guangzhou CHINA Telephone: +86 20 8766 7085 Telefax: +86 20 8765 9436 Email: [email protected] Contact person: Ms. Jane Cheng Preferred Makers represented: Brunvoll A.S Libra-Plast AS Tecway International Ltd. Room 303, Sam Cheong Building, 216-220, Des Voeux Road HK-510080 Hong Kong HONG KONG Telephone: +852 2851 2138 Telefax: +852 2581 1302 Contact person: Harold Ko Preferred Makers represented: Libra-Plast AS Tecway International Ltd. Room 2106, Ping an Building 24, Renmin Road, Zhongshan District CN-116001 Dalian CHINA Telephone: +86 411 8253 9175 Telefax: +86 411 8253 9187 Email: [email protected] Contact person: Mr. Xiao Ming Xu Preferred Makers represented: Brunvoll A.S Libra-Plast AS

Tehmar d.o.o. Palmoticeva 23 HR-21000 Split CROATIA Telephone: +385 21 530564 Telefax: +385 21 530564 Email: [email protected] Preferred Makers represented: Tranberg A.S. Teknotherm Marine HVAC Ul. Wyspianskiego 51 PL-70 497 Szczecin POLAND Telephone: +48 91 433 1800 Telefax: +48 91 433 1801 Email: [email protected] Contact person: Tomasz Skrzypczak www.teknotherm.pl Preferred Makers represented: Teknotherm Marine A/S Teknotherm Marine HVAC - Istanbul Repr. office Yala Mah. Vatan Meka is Merkezi, No: 58/15 Tuzla - Istanbul TURKEY Telephone: +90 533 332 83 97 Email: [email protected] Preferred Makers represented: Teknotherm Marine A/S Teknotherm Marine HVAC - St. Petersburg Repr. office Korablestriteley dom 32, Korpus 1, office 35N RU-RU-199 397 St. Petersburg RUSSIA Telephone: +7 812 946 9954 Email: [email protected] Preferred Makers represented: Teknotherm Marine A/S

471_512_SR_Alf_2016.indd 509 07.08.2016 11:47:27


510

Tokyo Sangyo Co. Ltd., InfrastructureDept. B Shin-Otemachi Bldg, 2-1,Otemachi, 2-Chorne Chiyoda-Ku, Tokyo JAPAN Telephone: +81-3-5203-7907 Telefax: +81-3-5203-0652 Contact person: Junichi Komatsu www.tscom.co.jp Preferred Makers represented: Libra-Plast AS Tranberg Systems AS Hjulmagervej 15C DK-7100 Vejle DENMARK Telephone: +45-7585 8380 Telefax: +45-7585 8370 Email: [email protected] Preferred Makers represented: Tranberg A.S. Tratec Ltd. No. 1-43-13, Asagaya-Kita, Suginami-ku JP-166-0001 Tokyo JAPAN Telephone: +81 3 3339 1211 Telefax: +81 3 3339 7577 Contact person: Mr. A. Omata, Mr. T. Miyoshi Preferred Makers represented: Teamtec A/S Ulmatec DMCCO Office 604, Maritime Business Centre Building, Dubai Maritime City (DMC) Dubai UNITED ARAB EMIRATES Telephone: +971 4 4476669 (Office) Telefax: +971 4 3688526 Email: [email protected] Contact person: Rajesh Kamath www.ulmatec.no Preferred Makers represented: Finnøy Gear & Propeller AS

Umar Shipping Services P.O.Box 58019 CY-3730 Limasson CYPRUS Telephone: +357 5 3555 18 Telefax: +357 5 3555 19 Email: [email protected] Contact person: Mr. Thrasos Tsangarides Preferred Makers represented: Harding Safety AS Uni-Safe Perspektivvej 11 DK-9900 Frederikshavn DENMARK Telephone: +45-98431353 Email: [email protected] www.unisafe.dk Preferred Makers represented: Hansen Protection AS Vèlar og Skip Ehf. Hólmaslód 4 IS-101 Reykjavik ICELAND Telephone: +354-562 0095 Telefax: +354-562 1095 Email: [email protected] Contact person: Magnus Petursson Preferred Makers represented: Brunvoll A.S Wear Dock & Engineering Co. South Dock, Sunderland GB-SR1 2EE Tyne & Wear UNITED KINGDOM Telephone: +44-191 567 4749 Telefax: +44-191 510 0765 Email: [email protected] Contact person: Harry Wilson www.weardock.co.uk Preferred Makers represented: Brunvoll A.S

471_512_SR_Alf_2016.indd 510 07.08.2016 11:47:27

511

SALES REPRESENTATIVES - Alphabetical List Western Advance Pty Ltd. Unit 10, 199 Balcatta Road, AU-6021 Balcatta Western AUSTRALIA Telephone: +61 8 9240 4622 Telefax: +61 8 9240 4822 Email: [email protected] Contact person: Michael Pugh www.westernadvance.com.au Preferred Makers represented: Norsafe AS Wide Beam SDN.BHD No. 17 Jalan SS 7/26, Kelana Jaya 47301 Petaling Jaya, Selangor D.E. MALAYSIA Telephone: +603 780 35371 Telefax: +603 780 35171 Email: [email protected] Preferred Makers represented: Tranberg A.S. Wildhagen Marine-Service GmbH Braunstrasse 12 DE-D-24145 Kiel GERMANY Telephone: +49 431 713809 Telefax: +49 431 714644 Email: [email protected] Preferred Makers represented: Harding Safety AS Wiltrading Pty. Ltd. 36 Dody Str. P.O. Box 133 AU-NSW 2015 Alexandria AUSTRALIA Contact person: T. Amundsen Preferred Makers represented: Masto Wire Service A/S

Wiltrading Pty. Ltd. 20 Mews Road P.O. Box 438 AU-WA 6160 Fremantle AUSTRALIA Telephone: +61 8 9335 9080 Telefax: +61 8 9335 7406 Contact person: Michael Connolly Preferred Makers represented: Maritime Partner AS Wire Rope Industries 104 Lorence St. unit 7 CA-PC3 RB Sudbury, Ontario CANADA Telephone: 204-7864404 Telefax: 204-7862848 Contact person: Rick Balmer Preferred Makers represented: Masto Wire Service A/S Woolley Pty. Limited, James 86 QUEEN STREET P.O. Box 161 AU-2282 Warners Bay, New South Wales AUSTRALIA Telephone: +61 249 48 90 20 Email: [email protected] Preferred Makers represented: Brunvoll A.S World Ocean Co., Ltd. 10th Fl., Hae Deok B/D, 1212-11 Choryang-Dong, Dong-Gu KR-601-839 Busan KOREA, SOUTH Telephone: 82 51 462 2554 Preferred Makers represented: Harding Safety AS

471_512_SR_Alf_2016.indd 511 07.08.2016 11:47:27


512

Yara Marine Technologies Gamla Almedalsvägen 21C SE-412 63 Gothenburg SWEDEN Telephone: +46 31 31 340 39 Email: [email protected] www.greentechmarine.com Preferred Makers represented: Yara Marine AS Zak Piping (M) Sdn Bhd D-3-3, Block D, Megan Phileo Promenade, 189 Jalan Tun Razak MY-50400 Kuala Lumpur MALAYSIA Telephone: +603 21 66 37 16 Telefax: +603 21 66 37 19 Email: [email protected] Contact person: Zakaria Mahmud Preferred Makers represented: Norsafe AS

471_512_SR_Alf_2016.indd 512 07.08.2016 11:47:27

513

SALES REPRESENTATIVES - Geographical List

SALES REPRESENTATIVESGEOGRAPHICAL LIST

513_558_SR-Geo_2016.indd 513 07.08.2016 11:47:49


514

ARGENTINACetus Naval Chile 1465 - 2 “B” AR-C1098AB Buenos Aires ARGENTINA Telephone: +54 11 4384 0842 Telefax: +54 11 4331 9426 Email: [email protected] www.cetus-naval.com.ar Preferred Makers represented: Optimarin AS Tranberg A.S. Cetus-Naval Ferreyra & Asociados S.H. Chile 1465 - 2 “B” AR-C1098AB Buoenos Aires ARGENTINA Telephone: +5411 4384 08 42 Telefax: +5411 4331 94 26 Email: [email protected] Contact person: Mr. A. Ferreyra / Mob: +54911 5630 42 47 Preferred Makers represented: Brunvoll A.S Teamtec A/S Henriksen Y. Cia. S.A., Gunnar Melian 3838 AR-1430 Buenos Aires ARGENTINA Telephone: +54 1 541 0969 Telefax: +54 1 541 4411 Contact person: Clas Henriksson Preferred Makers represented: Norsafe AS

Naval Motor S.A. Buenos Aires ARGENTINA Telephone: +54 11 4796 1777 Telefax: +54 11 4796 1888 Email: [email protected] Contact person: Jose Maria Valente Preferred Makers represented: Maritime Partner AS

AUSTRALIAAMI 107 Forsyth Street AU-W.A. 6163 O’Connor AUSTRALIA Telephone: +61-8-9337 3266 Telefax: +61-8-9314 2929 www.amisales.com.au Preferred Makers represented: Harding Safety AS Ceiling Works P.O. Box 70 Glengarry LPO AU-WA 6023 Glengarry LPO AUSTRALIA Telephone: +61 89 302 5777 Telefax: +61 89 302 5788 Email: [email protected] Preferred Makers represented: Libra-Plast AS Eylex Pty Ltd. 9/10 Anella Avenue AU-NSW 2154 Castle Hill AUSTRALIA Telephone: +61 2 8850 0599 Telefax: +61 2 9894 1662 Contact person: Mr. Todd Williams Preferred Makers represented: Comrod Communication A/S

513_558_SR-Geo_2016.indd 514 07.08.2016 11:47:49

515

SALES REPRESENTATIVES - Geographical List Fraser Pty Ltd - Perth, H.I. 27 a Stockdale Rd AU-6163 WA O’Connor AUSTRALIA Telephone: +61 8 9314 7877 Telefax: +61 8 9314 5933 Contact person: Mr. J. McDonald, Mob: +61 411 072 772 Preferred Makers represented: Teamtec A/S Fraser Pty Ltd - Sydney, H.I. 6/5 Vuko Place, Warriewood 2102 NSW PO Box 885 AU-1660 Mona Vale NSW AUSTRALIA Telephone: +61 2 9970 7322 Telefax: +61 2 9913 7207 Contact person: Mr. M. Blyth, Mob: +61 400 311 756 Preferred Makers represented: Teamtec A/S Headland Engineering Pty Ltd 666, Pittwater Road, Brookvale AU-NSW 2100 Sydney AUSTRALIA Telephone: +61-2-9939 1966 Telefax: +61-2-9938 6210 Contact person: G. Mannasz Preferred Makers represented: Finnøy Gear & Propeller AS NHP Electrical engineering Products Pty. Ltd. 43-67 river Street AU-3112 Richmond, Victoria AUSTRALIA Telephone: +61 3 94292999 Telefax: +61 3 94291075 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Safety Marine Autralia Pty. Ltd. 37 Levanswell Road, Moorabbin AU-3189 Victoria AUSTRALIA Telephone: +613 9555 5211 Telefax: +613 9553 4380 Preferred Makers represented: Hansen Protection AS Western Advance Pty Ltd. Unit 10, 199 Balcatta Road, AU-6021 Balcatta Western AUSTRALIA Telephone: +61 8 9240 4622 Telefax: +61 8 9240 4822 Email: [email protected] Contact person: Michael Pugh www.westernadvance.com.au Preferred Makers represented: Norsafe AS Wiltrading Pty. Ltd. 36 Dody Str. P.O. Box 133 AU-NSW 2015 Alexandria AUSTRALIA Contact person: T. Amundsen Preferred Makers represented: Masto Wire Service A/S Wiltrading Pty. Ltd. 20 Mews Road P.O. Box 438 AU-WA 6160 Fremantle AUSTRALIA Telephone: +61 8 9335 9080 Telefax: +61 8 9335 7406 Contact person: Michael Connolly Preferred Makers represented: Maritime Partner AS

513_558_SR-Geo_2016.indd 515 07.08.2016 11:47:49


516

Woolley Pty. Limited, James 86 QUEEN STREET P.O. Box 161 AU-2282 Warners Bay, New South Wales AUSTRALIA Telephone: +61 249 48 90 20 Email: [email protected] Preferred Makers represented: Brunvoll A.S

BELGIUMRadio Holland Belgium NV Noordersingel 17 BE-2140 Deurne (Antwerp) BELGIUM Telephone: +32-3-3201711 Telefax: +32-3-3662470 Contact person: Mr. Leo van Bulck Preferred Makers represented: Comrod Communication A/S SKB Life Saving Equipment nv Vosseschijnstraat 44 BE-2030 Antwerp BELGIUM Telephone: +32 3 2138670 Email: [email protected] www.skblse.be Preferred Makers represented: Hansen Protection AS

BRAZILIMC Comercio Int. c Repr. Ltda Rua Visconde do Piraja 414/311, 40, Ipanema BR-22410-002 Rio de Janeiro BRAZIL Telephone: +55 21 2522 0696 Telefax: +55 21 2522 6945 Email: [email protected] Contact person: Kenneth Mill Preferred Makers represented: Norsafe AS Kongsberg Maritime - Training center Avenida Hildebrando Alves Barbosa 3.700 - Nossa, Senhora da Ajuda BR-RJ 27950-010 Macaé BRAZIL Telephone: +55 22 3311 8121 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime do Brasil S.A. Av. Rio Branco 173 - 16 andar , Centro BR-BR-20040-007 Rio de Janeiro BRAZIL Telephone: +55 21 2240 9402 Telefax: +55 21 2262 8749 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

513_558_SR-Geo_2016.indd 516 07.08.2016 11:47:49

517


Macnor Marine Consultoria Empresarial Ltda. Av. Evandro Lins e Silva, 840, Barra da Tijuca BR-Sl 815/816 Rio de Janeiro BRAZIL Telephone: +55 21 22 20 54 13 Telefax: +55 21 2262 3174 Email: [email protected] Contact person: Pedro Guimaraes www.macnor.com.br Preferred Makers represented: AF Offshore AeronMollier AS Brunvoll A.S Maritime Partner AS Teamtec A/S Tranberg A.S. Metalock Brazil Ltda. Rua Visconde do Rio Branco 20/26 Santos - SP BRAZIL Telephone: +55 13 3226 4686 Telefax: +55 13 7804 4977 Email: [email protected] Preferred Makers represented: Optimarin AS Noreq Do Brazil Innovation Norway, Rua Lauro Muller,116 / suite 2405, Torre do Rio Sul / Botafogo Rio de Janeiro BRAZIL Telephone: (21) 3544 0022 Telefax: (21) 82 59 46 86 Email: [email protected] Preferred Makers represented: Harding Safety AS

BULGARIAEcatdan ApS 3. Angel Georgiev Str. BG-9000 Varna BULGARIA Telephone: +359 52 618265 Email: [email protected] Preferred Makers represented: Teamtec A/S

CANADAApel / CSA Enterprises 35 Ash Lake Court, Bayers Lake Business Park CA-B3S 1B7 Halifax, Novia Scotia CANADA Telephone: +1 902 4505647 Telefax: 1 902 4505286 Email: [email protected] Preferred Makers represented: Tranberg A.S. Hansen Protection Canada Ltd. 131 Thornhill Drive CA-B3B 1S2 Dartmounth, N.S CANADA Telephone: +1-902-468 6382 Telefax: +1-902-468 2367 Preferred Makers represented: Hansen Protection AS Hermont Marine Inc. 8080 Rte. Transcanadienne, CA-QC, H4S 1 M5 CANADA Telephone: +1 514-856-1212 Email: [email protected] www.hermont.com Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 517 07.08.2016 11:47:49


518

Kongsberg Maritime Ltd. 261 Brownlow Avenue, Dartmouth CA-B3B 2B6 Nova Scotia CANADA Telephone: +1 902 468 2268 Telefax: +1 902 468 2217 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Simulation 139 Water Street, Suite 902, CA-NF A1C 1B2 St.John’s, NL CANADA Telephone: +1 709 579 4859 Telefax: +1 709 579 4852 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Mesotech Ltd. 1598 Kebet Way, Port Coquitlam CA-V3C 5M5 British Columbia CANADA Telephone: +1 604 464 8144 Telefax: +1 604 941 5423 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Stahl Ltd., R. 5148-75th. Street CA-T6E-6W2 Edmonton, alberta CANADA Telephone: +1 800 782 4357 Telefax: +1 780 469 5525 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Wire Rope Industries 104 Lorence St. unit 7 CA-PC3 RB Sudbury, Ontario CANADA Telephone: 204-7864404 Telefax: 204-7862848 Contact person: Rick Balmer Preferred Makers represented: Masto Wire Service A/S

CHILEDesimat Ltda, Ingeniera Av. Puerto Vespucio CL-9670 Pudahuel Santiago CHILE Telephone: +56 2 7470152 Telefax: +56 2 7470153 Email: [email protected] Preferred Makers represented: Tranberg A.S. Eximtec Ltda. Neverie 4444, Floor 9 P.O. Box 3414 Santiago CHILE Telephone: +(56-2) 2076590. Mob. phone: + (56-9) 8700165 Telefax: + (56-2) 2076591 Email: [email protected] Contact person: Norberto E. Sainz Preferred Makers represented: AF Offshore AeronMollier AS

513_558_SR-Geo_2016.indd 518 07.08.2016 11:47:49

519


Eximtec Ltda. Avenida Apoquindo 4501, 4, Office 404 Las Condes-Santiago CHILE Telephone: +56-2-2076590 Telefax: +56-2-2076591 Email: [email protected] Contact person: Norberto E. Sainz Preferred Makers represented: Brunvoll A.S Teknotherm Marine A/S

CHINA17 Group of Norway Ltd. Room 2316, 23/F, Pudong Civil Aviation Centre, 18 Xin Jin Qiao Road CN-201206 Shanghai CHINA Telephone: +86 21 5030 1750 Telefax: +86 21 5030 1731 Email: [email protected] Contact person: Martin Nickelsen Preferred Makers represented: Tranberg A.S. Aeron Energy Technology Co. Ltd. Building 7, 530 Huicheng Road, Huinan Town, Pudong New District CN-201300 Shanghai CHINA Telephone: +86 21 5228 2590 Telefax: +86 21 5228 6173 Email: [email protected] Preferred Makers represented: AF Offshore AeronMollier AS

For Win Equipment & Engineering Co Ltd, Beijing Office Room 205, House Hao Bai C2 Block Building, No. 50, Xisanhuanbeilu CN-100044 Beijing CHINA Telephone: +86 10 88515498 88517369 88512699 88515022 Telefax: +86 10 88517458 Email: [email protected] Contact person: Cathy Yang www.forwin.com.cn Preferred Makers represented: Finnøy Gear & Propeller AS Hai Cheung Trading Co. (HK) Ltd. 8/F Juyang Tower, No. 1200, Pudong Avenue CN-PC 200135 Shanghai CHINA Telephone: +86 21 6888 9889 Ext. 6862 Telefax: +86 21 6329 3888 Email: [email protected] Contact person: Mr. Danny Ran - Shanghai Office www.haicheung.com Preferred Makers represented: Teamtec A/S Hai Cheung Trading Co., (HK) Ltd. RM 1706-7 Emperor Group Centre, 288 Hennessy Road Wanchai, Hong Kong CHINA Telephone: +852 2836 3936 Telefax: +852 2893 5550 Email: [email protected] Contact person: Mr. Francis Chan www.haicheung.com Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 519 07.08.2016 11:47:49


520

Health Lead Development Ltd. - Head-Office Room B, 12th Floor, Guangdong Investment Tower, 148 Connaught Road Central Hong Kong CHINA Telephone: +852-2858 0012 Telefax: +852-2559 6731 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd. - Wuhan Rm 21-1-202 Jinchang Garden, 101 Zhuodaoquan Road, Hongshan District CN-430079 Wuhan CHINA Telephone: +86 27 8761 98 08 Telefax: +86 27 8761 98 08 Email: [email protected] Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Dalian Office 23A Li Yuan Mansion, No. 16-18 Ming Ze Street Zhongshan District Dalian CHINA Telephone: +86 411 82825205 Telefax: +86 411 82803992 Email: [email protected] Contact person: Michael Tse/P.X. Song www.health-lead.com Preferred Makers represented: Harding Safety AS

Health Lead Development Ltd., Guangzhou office 30F Tai Fu Center, Tai Hong Plaza, No. 111 Tai Kang Road CN-510115 Guangzhou CHINA Telephone: +86 20 83221115 Telefax: +86 20 831221110 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Shanghai Office Rm 801 King tower, No 28 Xinjingqiao, Pudong CN-201206 Shanghai CHINA Telephone: +86 21 3382 14 60 Telefax: +86 21 3382 14 65 Email: [email protected] Contact person: Mr. Lu Yi www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Tianjin Office Room 501, Flat 23# Tai Feng Jia Yuan, No 99 Fourth avenue TEDA CN-300457 Tianjin CHINA Telephone: +86 22 66221118 Telefax: +86 22 66221118 Email: [email protected] Contact person: C.L. Zhang www.health-lead.com Preferred Makers represented: Harding Safety AS

513_558_SR-Geo_2016.indd 520 07.08.2016 11:47:49

521


Hua Hai Equipment & Engineering Co. Ltd Room 2018, Block B, Sea View Estate, 4-6 Watson Road North Point, Hong Kong CHINA Telephone: +852-8251 7783 Telefax: +852-2851 7522 Email: [email protected] Contact person: Kenneth Jo www.huahai.com.hk Preferred Makers represented: Maritime Partner AS Jason Offshore Equipment Co.,ltd 33I, New Time Plaza, Nanshan, Shenzhen Guangdong CHINA www.jasonoffshore.com Preferred Makers represented: Hansen Protection AS Kongsberg Maritime China (Jiangsu) Ltd. 3F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983333 Telefax: +86-511-81983399 Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China (Shanghai) Ltd. - Site Office RM 2703A/B, 25 Tongxing Street CN-116001 Dalian CHINA Telephone: +86-188-41181669 Telefax: +86-411-39869768 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime China (Shanghai) Ltd. - Site Office Rm 2002, North Tower, 3 Huaqiang Road CN-510623 Guangzhou CHINA Telephone: +86-188-19825000 Telefax: +86-20-38039496 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China Ltd. No.6 Building, 401 Chuanqiao Road CN-201206 Shanghai CHINA Telephone: +86-21-31279888 Telefax: +86-21-31279555 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China Zhenjiang Ltd. 1-2F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983222 Telefax: +86-511-81983299 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Long Ji Hong Kong Industrial Co. Ltd. 1202 China Merchant Plaza (East Building), No. 333 Chengdu Road (North) CN-200041 Shanghai CHINA Telephone: +86 21 3210 0553 Preferred Makers represented: Optimarin AS

513_558_SR-Geo_2016.indd 521 07.08.2016 11:47:49


522

Radio Holland Hong Kong 806 Join in Hang Sing Centre, 71-75 Container Port Road Kwai Chung N.T., Hong Kong CHINA Telephone: +8522-4239007 Telefax: +8522-34805898 Contact person: Stephen Chan Preferred Makers represented: Comrod Communication A/S Smith Marine & Offshore Technology Co.,Ltd. Room 3903, Shimao Bay R3 building Zhifu District, Yantai Shandong Province CHINA Telephone: +86 (0)535 6288176-602 Telefax: +86 6288276 Contact person: Terry Tongdacheng Preferred Makers represented: Parat Halvorsen A-S Tecway International (Marine) Ltd. RM.AB, 19/F, Yu Jia Bldg., 1336 Huashan Road, DR-Code: 3114941570 CN-200052 Shanghai CHINA Telephone: +86 21 6226 5267 Telefax: +86 21 6226 5015 Email: [email protected] Contact person: Mr. Yuda Zhang www.tecwayintl.com Preferred Makers represented: Brunvoll A.S Libra-Plast AS Tranberg A.S.

Tecway International Ltd. Room 2106, Ping an Building 24, Renmin Road, Zhongshan District CN-116001 Dalian CHINA Telephone: +86 411 8253 9175 Telefax: +86 411 8253 9187 Email: [email protected] Contact person: Mr. Xiao Ming Xu Preferred Makers represented: Brunvoll A.S Libra-Plast AS Tecway International Ltd. Room 1904, Tower 1, Dong-Jun Plaza, 828 - 836, Dongfeng Road East CN-5100800 Guangzhou CHINA Telephone: +86 20 8766 7085 Telefax: +86 20 8765 9436 Email: [email protected] Contact person: Ms. Jane Cheng Preferred Makers represented: Brunvoll A.S Libra-Plast AS

CROATIABater d.o.o. Kampanja 19 HR-51000 Rijeka CROATIA Telephone: +385 51 216 104 Telefax: +385 512 17 383 Email: [email protected] Contact person: Ivan Mataja Preferred Makers represented: Teknotherm Marine A/S

513_558_SR-Geo_2016.indd 522 07.08.2016 11:47:50

523


GM Turbo D.o.o. Vukovarska 58 HR-21000 Split, Hrvatska CROATIA Telephone: +021 543 985 Email: [email protected] Contact person: Danica Griusic Preferred Makers represented: Norsafe AS Imex Marine D.o.o. Dragonja 1 HR-52100 Pula CROATIA Telephone: +385 52 502 366 Telefax: +385 52 502 330 Email: [email protected] Contact person: Mr. Mladen Radolovic Preferred Makers represented: Brunvoll A.S Narval D.o.o. J.P Kamova 95 b, HR HR-51000 Rijeka CROATIA Telephone: +385 51 400 617 Email: [email protected] www.narval.hr Preferred Makers represented: Optimarin AS Scanadria d.o.o. Trgovina i zastupanje, Stube Marka Remsa 18 HR-51000 Rijeka CROATIA Telephone: +385 51 345 007 Telefax: +385 51 345 008 Email: [email protected] Contact person: Mr. Milos Scepanovic Preferred Makers represented: Libra-Plast AS

Scanadria D.O.O. Stube Marka Remsa 18 HR-51000 Rijeka CROATIA Telephone: +385 51 345007. Mob. phone: +385 98 546729 Telefax: +385 51 345008 Email: [email protected] Contact person: Milos Scepanovic Preferred Makers represented: AF Offshore AeronMollier AS Tehmar d.o.o. Palmoticeva 23 HR-21000 Split CROATIA Telephone: +385 21 530564 Telefax: +385 21 530564 Email: [email protected] Preferred Makers represented: Tranberg A.S.

CYPRUSAegean Dynamic Services Ltd. 49 Metochiou Street, Orphil Court, Office 301 CY-CY-1101 Nicosia CYPRUS Telephone: +357 22 661 988 Telefax: +357 22 660 521 Email: [email protected] www.aegeandynamic.com Preferred Makers represented: Optimarin AS

513_558_SR-Geo_2016.indd 523 07.08.2016 11:47:50


524

Sheerline Petrochemicals Ltd. The Hawk Building, 124, Gladstonos Street CY-3032 Limassol CYPRUS Telephone: +357 25 88 98 89 Telefax: +357 25 34 50 64 Email: [email protected] Contact person: Mr. K. Yiasoumis www.miegroup.com.cy Preferred Makers represented: Norsafe AS Umar Shipping Services P.O.Box 58019 CY-3730 Limasson CYPRUS Telephone: +357 5 3555 18 Telefax: +357 5 3555 19 Email: [email protected] Contact person: Mr. Thrasos Tsangarides Preferred Makers represented: Harding Safety AS

DENMARKFournais AS Enrumvej 7 DK-2942 Skodsborg DENMARK Telephone: +45-42 89 04 45 Telefax: +45-42 89 42 25 Email: [email protected] Contact person: Peter Fournais www.fournais-ing.dk Preferred Makers represented: Brunvoll A.S

Heidemann Ing. & Handelsfirma ApS Sødergade 242 DK-9900 Fredrikshavn DENMARK Telephone: +45 98 422 030 Telefax: +45 98 438 890 Email: peer.heidemann.dk Contact person: Peer H. Heidemann Preferred Makers represented: Optimarin AS Noreq Acta A/S Emil Neckelmanns Vej 15 K DK-5220 Odense SØ DENMARK Telephone: +45 63 17 61 00 Telefax: +45 66 15 35 57 Email: [email protected] Preferred Makers represented: Harding Safety AS Scan, AS Fabriksvej 14 DK-6960 Hvide Sande DENMARK Telephone: +45 9731 1045 Telefax: +45 9731 1677 Email: [email protected] Contact person: Michael Vejlgaard Preferred Makers represented: Parat Halvorsen A-S Tranberg Systems AS Hjulmagervej 15C DK-7100 Vejle DENMARK Telephone: +45-7585 8380 Telefax: +45-7585 8370 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 524 07.08.2016 11:47:50

525


Uni-Safe Perspektivvej 11 DK-9900 Frederikshavn DENMARK Telephone: +45-98431353 Email: [email protected] www.unisafe.dk Preferred Makers represented: Hansen Protection AS

EGYPTBureau of Eng Morad, Ahmed 278 Cornich Avenue, Stanley Beach Alexandria EGYPT Telephone: +20 3 54 36 140 Telefax: +20 3 54 11 060 Email: [email protected] Contact person: Morad S. Ahmed Preferred Makers represented: Norsafe AS

FINLANDATP Trading OY Vartiokylantie 9 P.O. Box 77 FI-00931 Helsinki FINLAND Telephone: +358-9-3250055 Telefax: +358-9-3250883 Email: [email protected] Contact person: Antti Parkinen Preferred Makers represented: Libra-Plast AS Teknotherm Marine A/S

Maritim AB, OY Veneentekijäntie 1 FI-00210 Helsinki 21 FINLAND Telephone: +358 (0)207 651 80 Email: [email protected] www.maritim.fi Preferred Makers represented: Hansen Protection AS Septor OY Laurinmäenkuja 3FI-00440 Helsinki FINLAND Telephone: +358 400 911435 Telefax: +358 20 720 9639 Email: [email protected] Contact person: Mr. Fredrik Björklöf www.septor.fi Preferred Makers represented: Brunvoll A.S Maritime Partner AS Structor Oy Laurinmäenkuja 3 P.O. Box 299 FI-00101 Helsinki FINLAND Telephone: +358 20 7209632 Telefax: +358 20 7209639 Email: [email protected] Contact person: Fredrik Björklöf Preferred Makers represented: Parat Halvorsen A-S

513_558_SR-Geo_2016.indd 525 07.08.2016 11:47:50


526

FRANCEAcebi Saint-Herblon FR-44150 Ancenis FRANCE Telephone: +33 240 98 00 06 Telefax: +33 240 98 09 22 Email: [email protected] Contact person: Jean-Pierre Moreau www.acebi.com Preferred Makers represented: Norsafe AS Atlantique Shipping 95 Route de Leur Ar March FR-29470 Plougastel-Daoulas FRANCE Telephone: +33-02 98 04 26 59 Telefax: +33 2 9804 2268 Email: [email protected] Contact person: Patrick Le Bihan Preferred Makers represented: Brunvoll A.S Comrod France S.A. 600 Chemin des Hamaïdes, BP 10119, FR-59732 Saint Amand Les Eaux FRANCE Telephone: +33 32722 8550 Telefax: +33 32722 8555 Email: [email protected] Preferred Makers represented: Comrod Communication A/S

Equimer - Folliard 30 Avenue Amiral Lemonnier FR-78150 Marly le Roi FRANCE Telephone: +33 139 16 35 80 Telefax: +33 139 16 31 94 Email: [email protected] Contact person: Mr. P. Folliard, Mob: +33 663 27 94 26 www.equimer.com Preferred Makers represented: Teamtec A/S Serviseas 35, rue du Landanier FR-35170 Bruz FRANCE Telephone: +33 6 86 04 75 38 Contact person: Jean-Michel Seinlary Preferred Makers represented: Libra-Plast AS Maritime Partner AS Stahl France S.A.S., R. Immeuble Naxos, 56, Rue des Hautes Patures FR-92737 Nanterre Cedex FRANCE Telephone: +33 1 41194858 Telefax: +33 1 41194859 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 526 07.08.2016 11:47:50

527


GERMANYBrunvoll Deutschland / Steinbach Ingenieurtechnik Robert Bosch Str. 7A DE-23909 Ratzeburg GERMANY Telephone: +49 4541 802610 Telefax: +49 4541 8026120 Email: [email protected] Contact person: Jörg Steinbach Preferred Makers represented: Brunvoll A.S Emder Ship Supply Zu den Hafenbecken 7-9 DE-26723 Emden GERMANY Telephone: +49 4921 8009-0 Telefax: +49 4921 8009-10 Email: [email protected] www.emder.de Preferred Makers represented: EuroRope Marine AS Hodt Korrosschutz GmbH Flurstr. 8 DE-21465 Wentorf Hamburg GERMANY Telephone: +49 40 72 90 40 30 Telefax: +49 40 72 90 40 59 Preferred Makers represented: Masto Wire Service A/S Imtech Marine Germany GmbH Albert Einstein - Ring 6 DE-22 761 Hamburg GERMANY Telephone: +49-40-8997215 Telefax: +49-40-89972199 Contact person: Michael Miersen Preferred Makers represented: Comrod Communication A/S

Marine & Offshore Equipment GmbH & Co Røntgenstrasse 6 DE-21465 Reinbek GERMANY Telephone: +49 40 650 456-0 Telefax: +49 40 650 456-11 Email: [email protected] Contact person: Tim Kutscher www.moe-hh.de Preferred Makers represented: Norsafe AS Teamtec A/S NAUTILUS Marine Service GmbH Alter Postweg 24 DE-21614 Buxtehude GERMANY Telephone: +49 4161 86625 0 Email: [email protected] www.nautilus-gmbh.com Preferred Makers represented: Hansen Protection AS Stahl Schaltergeräte GmbH, R. Am Bahnhof 30 DE-74638 Waldenburg GERMANY Telephone: +49 7942 943-0 Telefax: +49 7942 943-4333 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 527 07.08.2016 11:47:50


528

Steinbach Ingenieurtechnik Robert Bosch Strasse 7A DE-23909 Ratzeburg GERMANY Telephone: +49 4541 802610 Telefax: +49 4541 80261 20 Email: [email protected] Contact person: Jörg Steinbach www.si-technik.de Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Wildhagen Marine-Service GmbH Braunstrasse 12 DE-D-24145 Kiel GERMANY Telephone: +49 431 713809 Telefax: +49 431 714644 Email: [email protected] Preferred Makers represented: Harding Safety AS

GREECEAegean Dynamic Services Ltd. 71 Akti Miaouli GR-185 37 Piraeus GREECE Telephone: +30 210 4280444 Telefax: +30 210 4280443 Email: [email protected] www.aegeandynamic.com Preferred Makers represented: Optimarin AS

Alpha Marine Engineering Ltd. Salaminos 43 GR-166 74 Glyfada, Athens GREECE Telephone: +30 210 89 43 220 Telefax: +30 210 96 80 210 Email: [email protected] Contact person: Mr. Dimitris Perakis www.ame.gr Preferred Makers represented: Brunvoll A.S Maritime Partner AS Teamtec A/S Intra Mare Greece 4, Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 210 429 3843 Telefax: +30 210 429 3845 Email: [email protected] Contact person: George Gerassimou www.intramare.gr Preferred Makers represented: Norsafe AS Teknotherm Marine A/S Intra Mare Hellas 4 Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 10 4293 843 Telefax: +30 10 4293 845 Email: [email protected] Contact person: Mr. George Gerassimou Preferred Makers represented: Libra-Plast AS

513_558_SR-Geo_2016.indd 528 07.08.2016 11:47:50

529


Kaminco Overseas Inc. Pireaus Branch: 57 Aki Miaouli P.O. Box 80 222 GR-18510 Piraeus GREECE Telephone: +301 45 28 240 Telefax: +301 42 94 887 Email: [email protected] Contact person: Sotirios Kaminis Preferred Makers represented: Finnøy Gear & Propeller AS Kongsberg Maritime Hellas SA 7 Gravias street GR-7 Gravias street Piraeus GREECE Telephone: +30 210 4117200 Telefax: +30 210 4117200 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

HONG KONGGlobal Mar-Tech Company Ltd. 21-25 Cheung Sha Wan Road HONG KONG Telephone: + 852 3520 4957. Mob. phone: +852 9454 3254 Telefax: +852 3520 4951 Email: [email protected] Contact person: CK Tang Preferred Makers represented: AF Offshore AeronMollier AS

Tecway (HK) Ltd. Flat 15&19, 10/F, Shatin Galleria, 18-24 Shan Mel Street, Fotan Shatin, New Territories HONG KONG Telephone: +852 2548 3118 Telefax: +852 2581 1302 Email: [email protected] Contact person: Mr. Harold Ko www.tecwayintl.com Preferred Makers represented: Brunvoll A.S Teamtec A/S Tecway International Ltd. Room 303, Sam Cheong Building, 216-220, Des Voeux Road HK-510080 Hong Kong HONG KONG Telephone: +852 2851 2138 Telefax: +852 2581 1302 Contact person: Harold Ko Preferred Makers represented: Libra-Plast AS

ICELANDAkor ehf Logasalir 1 IS-201 Kópavogur ICELAND Telephone: +354 517 9100 Telefax: +354 517 1902 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 529 07.08.2016 11:47:50


530

Donna HF Háihvammur 16 IS-220 Hafnarfjörâur ICELAND Telephone: +354 555 3100 Telefax: +354 365 3455 Email: [email protected] Contact person: Olafur Magnusson www.donna.is Preferred Makers represented: Maritime Partner AS Vèlar og Skip Ehf. Hólmaslód 4 IS-101 Reykjavik ICELAND Telephone: +354-562 0095 Telefax: +354-562 1095 Email: [email protected] Contact person: Magnus Petursson Preferred Makers represented: Brunvoll A.S

INDIAArdee Saigal Group 83-c, Mittal Court, Nairman point IN-400 021 Mumbai INDIA Telephone: +91 22 22 04 02 57 Telefax: +91 22 22 4 72 93 Email: [email protected] Contact person: Raj Choudhari Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS

Chidambaram Shipcare Private Limited 38 Second Line Beach IN-600 001 Chennai INDIA Telephone: (91) (44) 25220304 Telefax: (91) (44) 25220080 Email: [email protected] www.shipcare.in Preferred Makers represented: Optimarin AS DSL Trading Put Ltd. c/6-103/104, Kanchau Pushd Complex, Opp. Suraj Water Park,Kavsar, G.B. Road IN-400 607 Thane (W) INDIA Telephone: +91 25970125/26 Telefax: +91 25970127 Email: [email protected] Preferred Makers represented: Masto Wire Service A/S Killing Agencies and Marketing Limited Plot no. 7, Chandivali Farm Road, Chandivali IN-400 072 Mumbai INDIA Telephone: +91 22 2857 3581 Telefax: +91 22 2857 3549 Email: [email protected] Contact person: Pradeep M Mankame www.kaml.in Preferred Makers represented: Maritime Partner AS

513_558_SR-Geo_2016.indd 530 07.08.2016 11:47:50

531


Kongsberg Maritime India Private Ltd. Plot No 14,Sector 24,Vashi-Turbhe,, Sion-Panvel Highway IN-400 705 Navi Mumbai INDIA Telephone: +91 22 4119 0101 Telefax: +91 22 4119 0111 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Process Simulation Pvt. Ltd 6th floor, Plot no - 29-32, 36-37, Pudhari Bhavan, Sector - 30A, Vashi IN-400 705 Navi Mumbai INDIA Telephone: +91 22 4157 5200 Telefax: +91 22 4157 5250 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Norinco Private Limited INDIA Telephone: +91 22 2757 1242 Email: [email protected] Preferred Makers represented: Anda-Olsen AS Norinco Private Limited (Kolkatta) 14 Netaji Subhas Road, 2nd Floor P.O. Box No 2211 Kolkatta IN-700 001 West Bengal INDIA Telephone: +91 33 22 21 2452 / 22436094 Telefax: +91 33 22 20 3361 Email: [email protected] Contact person: Mr. Narayan Jaikishen Preferred Makers represented: Teamtec A/S

Norinco Private Limited (Mumbay) #301/302, 3rd Floor, Orbit Plaza (Behind Chaitanya Towers), New Prabhadevi Road, Prabhadevi P.O. Box 871 IN-400 001 Mumbai INDIA Telephone: +91 22 2438 9712 - 9713 - 9717 Telefax: +91 22 2438 9715 Email: [email protected] Contact person: Mr. George Mathew, Managing Director www.norinco.co.in Preferred Makers represented: Teamtec A/S Norinco Private Ltd. #301/302, 3rd Floor, Orbit Plaza, New Prabhadevi Road, Prabhadevi IN-400 025 Mumbai INDIA Telephone: +91 22 2438 9712/13/17 Telefax: +91 22 2438 9715 Email: [email protected] Contact person: Nandan Tavanandi www.norinco.co.in Preferred Makers represented: Norsafe AS Stahl (P) Ltd., R. 9, Arcot Road, Lakshmi Nagar, Porur IN-600 116 Chennai INDIA Telephone: +91 44 24766674 Telefax: +91 44 24767835 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 531 07.08.2016 11:47:50


532

INDONESIABripindo Ciladak Commersial Estate, Building 404 P.O. Box 5/CCE SAK SEL ID-12560 Jakarta INDONESIA Telephone: 7801936/7802192 Telefax: 7860779 Preferred Makers represented: Masto Wire Service A/S PT. Assindo Perniagaan Internasional (API) Victoria Centre 3rd Floor, Jl. Sultan Hasanuddin No. 47-51 P.O. Box 4051 ID-12160 Jakarta INDONESIA Telephone: +62 21 72 55541 Telefax: +62 21 72 55546 Email: [email protected] Contact person: Mr. Bachtiar Sonda and Mr. Arnold Karauwan Preferred Makers represented: Teamtec A/S

IRANEmami, Eng. I. Pariz Kala, Apt. 19 (6th floor), No. 147, Khoramsha Avenue IR-15338 Teheran IRAN Telephone: +98 21 875 3080 Telefax: +98 21 857 0582 Email: [email protected] Preferred Makers represented: Norsafe AS

ISRAELGalram Surveyors & Adjusters Ltd. P.O. Box 4094 IL-77140 ISRAEL Telephone: +972 8 856 1634 Telefax: + 972 8 853 1325 Email: [email protected] www.galram.com Preferred Makers represented: Optimarin AS

ITALYBavcar, Claudio Via U. Felluga 90/2 IT-34132 Trieste ITALY Telephone: +39 040 94 37 36 Telefax: +39 040 39 45 51 Email: [email protected] Contact person: Claudio Bavcar Preferred Makers represented: Brunvoll A.S Cifast S.P.A. Centro Funi, Corso Bramante 56 IT-10126 Torino ITALY Telephone: +11-6965151 Telefax: +11-637055 Contact person: Franco Tonus Preferred Makers represented: Masto Wire Service A/S

513_558_SR-Geo_2016.indd 532 07.08.2016 11:47:50

533


Hermes, Ing. Lorenzo Ermini Via Trento 43/2 IT-16145 Genova ITALY Telephone: +39 010 3622 525 Telefax: +39 010 3169 58 Email: [email protected] Contact person: Lorenzo Ermini Preferred Makers represented: Norsafe AS Kongsberg Maritime Srl Via Cornelia 498, Block 2 - First floor IT-00166 Rome ITALY Telephone: +39 06 615 224 76 Telefax: +39 06 615 295 13 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Marine EQ Via Cassa di Risparmio 6 IT-34121 Trieste ITALY Telephone: +39 040 660 550 Telefax: +39 040 660 620 Email: [email protected] Contact person: Ms. Annamaria Zangrilli Preferred Makers represented: Brunvoll A.S Sernav S.P.A. Via Cornigliano 185 IT-16152 Genova ITALY Telefax: 10-418820 Contact person: Boccardo Preferred Makers represented: Masto Wire Service A/S

SIRN srl Via Casaregis 22/1 IT-16147 Genova ITALY Telephone: +39 010 58 67 71 Telefax: +39 010 54 26 78 Email: [email protected] Preferred Makers represented: Teamtec A/S Sirn Srl. Via Lazaretto Vecchio, 9 IT-30123 Trieste ITALY Telephone: +39 040 3042 47 Telefax: +39 040 30 81 96 Email: [email protected] Contact person: Mr. Cataldo (Dino) Gravina, President Preferred Makers represented: Teamtec A/S Stahl sri socio unico, R. Via Grandi 27 IT-20068 Peschiera Borromeo (MI) ITALY Telephone: +39 2 55308024 Telefax: +39 2 51650680 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 533 07.08.2016 11:47:50


534

Stelio Bardi SRL Via delle Primule, 101 IT-16148 Genova ITALY Telephone: +39 010 3760 750 Telefax: +39 010 3760 759 Email: [email protected] Contact person: Stelio Bardi www.bardi.it Preferred Makers represented: Libra-Plast AS Optimarin AS

JAPANKyoei Marine Co., Ltd. Yokohama JAPAN Email: [email protected] Preferred Makers represented: EuroRope Marine AS Nippon Engineering & Trading Room 502 Nippon-Bashi Residenc, 2-4-21 Kouzu, Chuo-Ku, JP-542-007 Osaka JAPAN Telephone: +81 66212 0175 Telefax: +81 66212 0176 Email: [email protected] Contact person: H. Matsumoto Preferred Makers represented: Maritime Partner AS

Stahl K.K. Co. Ltd., R. Sinyurigaoka - City Bldg. 4F, 1-1, Manpukuji 1 chome, Asou JP-215-0004 Kawasaki-shi, Kanagawa JAPAN Telephone: +81 44 9592612 Telefax: +81 44 9592605 Email: [email protected] Preferred Makers represented: Tranberg A.S. Tokyo Sangyo Co. Ltd., Infrastructure Dept. B Shin-Otemachi Bldg, 2-1,Otemachi, 2-Chorne Chiyoda-Ku, Tokyo JAPAN Telephone: +81-3-5203-7907 Telefax: +81-3-5203-0652 Contact person: Junichi Komatsu www.tscom.co.jp Preferred Makers represented: Libra-Plast AS Tratec Ltd. No. 1-43-13, Asagaya-Kita, Suginami-ku JP-166-0001 Tokyo JAPAN Telephone: +81 3 3339 1211 Telefax: +81 3 3339 7577 Contact person: Mr. A. Omata, Mr. T. Miyoshi Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 534 07.08.2016 11:47:50

535


KOREA, SOUTHBoema Hi-Tec Ltd. 4th Floor, Seoul Bldg., 1532-7 Seocho 3-Dong, Seocho-Gu KR-137-871 Seoul KOREA, SOUTH Telephone: +82-2-3486 3340 Telefax: +82-2-3486 3341 Email: [email protected] Contact person: Hyun Ock Kim Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS Dae Hwa Trading Co. #1715, 17th Floor of Centrum IS Tower 1209, Jaesong-Dong, Haeundae-Gu KR-612 050 Busan KOREA, SOUTH Telephone: +82 51 747 5460 - Mobil +82 11 59 42 510 Telefax: +82 51 747 5426 Email: [email protected] Contact person: J.H. Tak Preferred Makers represented: Norsafe AS Daehwa Trading Company #1715, 17th floor Centrum IS Tower, 1209 Jaesong-Dong, Haeudae-Gu KR-612 050 Pusan KOREA, SOUTH Telephone: +82-51-747-5460 Telefax: +82-51-747-5426 Email: [email protected] Preferred Makers represented: Optimarin AS

Enmao Corporation 715 Ho, Ocean Tower, Wu 1-Dong, Haeundae-Gu KR-612-021 Busan KOREA, SOUTH Telephone: +82 517 405 140 Telefax: +82 517 405 142 Email: [email protected] Contact person: Lim Young-Hak Preferred Makers represented: AF Offshore AeronMollier AS Anda-Olsen AS Gin-A Co., Ltd. 912 Dongbu Root Bldg. 16-2, Sunae-dong, Bundang-gu, Seongnam-si KR-463-825 Gyeonggi-do KOREA, SOUTH Telephone: +82 31 711 9681/2 Telefax: +82 31 711 4230 Email: [email protected] Contact person: B.H. Lee /S.H. Jung Preferred Makers represented: Maritime Partner AS Goltens Korea Room 1003, ACE Hightech 21, 1470, U-Dong, Haeundae-Gu KR-612-020 Busan KOREA, SOUTH Telephone: +82 51 744 8000 Telefax: +82 51 744 8008 Email: [email protected] Contact person: Mr. K.O. Kim, Mob: +82 10 93927441 www.goltens.com Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 535 07.08.2016 11:47:50


536

Jaeun Corporation 648-8, Moonhyun-2dong KR-608-042 Pusan KOREA, SOUTH Telephone: +82 51 631 7398 Telefax: +82 51 647 7515 Contact person: Chae Kyu Lee Preferred Makers represented: Comrod Communication A/S Kongsberg Maritime Korea Ltd. #1101-Harbor Tower, 113-1, Nampodong 6-Ga, Jung-Gu KR-600-046 Busan KOREA, SOUTH Telephone: +82-51-242-9933 Telefax: +82-51-242-9934 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 3F,181-23,Seobu-dong, Dong-gu KR-681-807 Ulsan KOREA, SOUTH Telephone: +82 52 236 0869 Telefax: +82 52 236 0881 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 4F, Mariposa Bldg 531-17, Okpo-dong KR-656-906 Geoje, Gyeongsangnam-do KOREA, SOUTH Telephone: +82 55 687 4561 Telefax: +82 55 687 4661 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime Korea Ltd. - Site Office 3F,1869, Yongdang-ri, Samho-eup, Youngam-gun KR-526-896 Jellanam-do KOREA, SOUTH Telephone: +82 61 461 0160 Telefax: +82 61 461 0160 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 2F, Artvil Bldg 1198, Jangpyung-ri, Shinhyun-eup KR-656-808 Geoje, Gyeongsangnam-do KOREA, SOUTH Telephone: +82 55 633 7061 Telefax: +82 55 633 7051 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Parat Korea Centum Class one, Rm. 1413, Haeunde KR-612-050 Busan KOREA, SOUTH Telephone: +82 10 3189 2916 Telefax: +82 51 783 2916 Email: [email protected] Contact person: S. H. Oh Preferred Makers represented: Parat Halvorsen A-S Sang Myung Trading Co., Ltd. #1935, 21 Cebtury O/T, 55-1-Daeyeon-Dong Nam-Ku Pusan KOREA, SOUTH Telephone: +82 51 610 1211 Telefax: +82 51 610 1215 Email: [email protected] Contact person: H.T. Kim Preferred Makers represented: Libra-Plast AS

513_558_SR-Geo_2016.indd 536 07.08.2016 11:47:50

537

SALES REPRESENTATIVES - Geographical List Stahl Co. Ltd., R. No. 503 Keang Nam Bldg., #163-16 Sung Nae-Dong Kang Dong-Ku, Seoul KOREA, SOUTH Telephone: +82 2 4708877 Telefax: +82 2 4718285 Email: [email protected] Preferred Makers represented: Tranberg A.S. World Ocean Co., Ltd. 10th Fl., Hae Deok B/D, 1212-11 Choryang-Dong, Dong-Gu KR-601-839 Busan KOREA, SOUTH Telephone: 82 51 462 2554 Preferred Makers represented: Harding Safety AS

KUWAITKuwait Development & Trading Co. Shuwaikh Industrial Area - Jahra Road-Kuwait P.O. Box 707 KW-13008 Safat KUWAIT Telephone: +965 4815517 Telefax: +965 4819059 Email: [email protected] Contact person: Idris Taher www.kdtco.net Preferred Makers represented: Maritime Partner AS

MALAYSIASerimatik 10-3A Ukay Boulevard, Middle Ring Road2 (MRR2) MY-68000 Ampang, Selangor Darul Ehsan MALAYSIA Telephone: +603 4161 9111 Telefax: +603 4161 9911 Email: [email protected] Preferred Makers represented: Harding Safety AS Wide Beam SDN.BHD No. 17 Jalan SS 7/26, Kelana Jaya 47301 Petaling Jaya, Selangor D.E. MALAYSIA Telephone: +603 780 35371 Telefax: +603 780 35171 Email: [email protected] Preferred Makers represented: Tranberg A.S. Zak Piping (M) Sdn Bhd D-3-3, Block D, Megan Phileo Promenade, 189 Jalan Tun Razak MY-50400 Kuala Lumpur MALAYSIA Telephone: +603 21 66 37 16Telefax: +603 21 66 37 19 Email: [email protected] Contact person: Zakaria Mahmud Preferred Makers represented: Norsafe AS

513_558_SR-Geo_2016.indd 537 07.08.2016 11:47:50


538

MALDIVESIlaa Maldives Pte. Ltd. Onugas Magu MV-10637 (M2-24), Hulhumale’ MALDIVES Telephone: +960 335 5751 Telefax: +960 31 07 02 Email: [email protected] Contact person: Mr. Adnan Moosa www.ilaamaldives.com Preferred Makers represented: Teamtec A/S

MEXICOImplementos y Servicios Electrónicos SA de CV (ISEL) Via Lopez Mateos 128, Col Jacarandas MX-54050 Tlalnepantla, Estado de México cp MEXICO Telephone: +52 55 5398 8088 Telefax: +52 55 5397 3985 Email: [email protected] Preferred Makers represented: Tranberg A.S. Kongsberg Maritime Mexico S.A. DE C.V. Av. La Marigalante 311-31, Boca Del Rio MX-94298 Veracruz MEXICO Telephone: + 52 229 921 7708 Telefax: +(52) 229 197 1198 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

NETHERLANDS, THEAll Pumps Holland B.V. Achterdijk 84a Postbus 41, 4140 AA Leerdam NL-4243 TM Nieuwland NETHERLANDS, THE Telephone: +31 (0) 345-62 13 44 Email: [email protected] www.allpumpsholland.nl Preferred Makers represented: Teamtec A/S Biardo survival suits bv De Trompet 2800 NL-1967 DD Heemskerk NETHERLANDS, THE Telephone: +31 (0)251 241256 Telefax: +31 (0)251 246932 Email: [email protected] Preferred Makers represented: Hansen Protection AS Dräger Marine & Offshore (Unisafe) Beurtschipperstraat 1 NL-3194 AL Hoogvliet NETHERLANDS, THE Telephone: +31 (0) 10 295 2710 Email: [email protected] www.unisafe.nl Preferred Makers represented: Hansen Protection AS Electromach bv Hamerstraat 10 P.O. Box 175 NL-7550 AD Hengelo NETHERLANDS, THE Telephone: +31 74 2 472 472 Telefax: +31 74 2 435 925 Email: [email protected] Preferred Makers represented: Tranberg A.S.

513_558_SR-Geo_2016.indd 538 07.08.2016 11:47:50

539

SALES REPRESENTATIVES - Geographical List Holland Safety Energieweg 2c NL-1785 AD Den Helder NETHERLANDS, THE Telephone: 223 614 999 Email: [email protected] www.holland-safety.nl Preferred Makers represented: Hansen Protection AS Kongsberg Maritime Holland BV Edisonweg 10 NL-3208 kb Spijkenisse NETHERLANDS, THE Telephone: +31 181 623 611 Telefax: +31 181 626 162 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Radio Holland Netherlands B.V. Eekhoutstraat 2 NL-3087 AB Rotterdam NETHERLANDS, THE Telephone: +31 10 4283344 Telefax: +31 10 4281498 Contact person: Mr. Jan Dielemann Preferred Makers represented: Comrod Communication A/S Seaparts Molenraai 11 NL-9611 Th Sappemeer NETHERLANDS, THE Telephone: +31 598 361 665 Email: [email protected] www.seaparts.nl Preferred Makers represented: Libra-Plast AS

TBU - B.V. Seinshuiswachter 1 NL-3034 KH Rotterdam NETHERLANDS, THE Telephone: +31 10 4114614 Telefax: +31 10 1414004 Email: [email protected] Contact person: H.F. Uittenbogaart Preferred Makers represented: Teknotherm Marine A/S TBU - B.V. Technisch Bureau Uittenbogaart Brugwachter 13 NL-3034 KD Rotterdam NETHERLANDS, THE Telephone: +31 10 411 46 14 Telefax: +31 10 414 10 04 Email: [email protected] www.tbu.nl Preferred Makers represented: Optimarin AS Technoship B V, Mariecke Siezen Socratesstraat 94 NL-7323 PH Apeldoorn NETHERLANDS, THE Telephone: +31 553 555 876 Telefax: +31 553 555 861 Email: [email protected] Contact person: Hans Siezen www.faxberoepengids.nl/72653 Preferred Makers represented: Norsafe AS

513_558_SR-Geo_2016.indd 539 07.08.2016 11:47:50


540

NEW CALEDONIAHeros R. Zone Industrielle, Baic de Numbo-Lots 6 et 7 BP3267 NC-98846 Noumea NEW CALEDONIA Telephone: +687 28 59 69 Telefax: +687 25 22 47 Preferred Makers represented: Norsafe AS

NEW ZEALANDCeiling Works P.O. Box 70 NZ-WA 6023 Duncraig East LPO NEW ZEALAND Telephone: + 61 89 302 57 77 Telefax: + 61 89 302 57 88 Email: [email protected] Contact person: Mr. Jim Mc Inerney Preferred Makers represented: Libra-Plast AS

NIGERIAAsolan Integrated Projects Limited Plot 21, 19th Street Bendel Estate Warri NIGERIA Telephone: +234 80522 29650 Email: [email protected] Preferred Makers represented: Teamtec A/S

Fode Nigeria Limited 24 Erastus Akingbola Street, Lekki Phase 1 Lagos NIGERIA Telephone: +234 1 271 8608/8609 Telefax: +234 1 271 8610 Email: [email protected] Contact person: Paul Blake www.fode-ltd.com Preferred Makers represented: Norsafe AS

PERUDesimat Peru SAC Av. Velasco Astete 2371 Surco-Lima PERU Telephone: +51 1 2752765 Telefax: +51 1 2752776 Email: [email protected] Preferred Makers represented: Tranberg A.S.

POLANDAFA Marine ul. Polnicy 37/6 PL-80-177 Gdansk POLAND Telephone: +48-58-3030159 Telefax: +48-58-3030351 Email: [email protected] Contact person: Mirka Gierak Preferred Makers represented: Brunvoll A.S

513_558_SR-Geo_2016.indd 540 07.08.2016 11:47:51

541


Automatic Systems engineering Sp. z.o.o. Ul. Narwicka 6 PL-80-557 Gdansk POLAND Telephone: +48 58 520 77 20 Telefax: +48 58 346 43 44 Email: [email protected] Preferred Makers represented: Tranberg A.S. BMS Marine Survey ul. Wyczólkowsiego 73 PL-80 147 Gedansk POLAND Telephone: +48 58 30 20 13 0 Telefax: +48 58 30 20 13 0 Email: [email protected] Contact person: Mr. Zbigniew Baranski and Mr. Krzysztof Pazderski Preferred Makers represented: Teamtec A/S IMS Griffin ul. Luzycka 2A PL-81-537 Gdynia POLAND Telephone: (058) 620 52 63 Email: [email protected] www.griffin-marine.pl Preferred Makers represented: Hansen Protection AS Kongsberg Maritime Poland Sp. z o.o. Ul. Ziemowita 10d PL-71-717 Szczecin POLAND Telephone: +48 91 459 9300 Telefax: +48 91 459 9399 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Noreq Sp. z o.o Unii Europejskiej 8, PL-86-050 Solec Kujawski POLAND Telephone: +48 52 38 70 608 Email: [email protected] Preferred Makers represented: Harding Safety AS Teknotherm Marine HVAC Ul. Wyspianskiego 51 PL-70 497 Szczecin POLAND Telephone: +48 91 433 1800 Telefax: +48 91 433 1801 Email: [email protected] Contact person: Tomasz Skrzypczak www.teknotherm.pl Preferred Makers represented: Teknotherm Marine A/S

PORTUGALCogema, Comêrcio Geral De Mâquinas, Lda. Av. Sidonio Pais 28-4,Drt PT-P-1050 Lisboa PORTUGAL Telephone: +351 21355 6843 Telefax: +351 21355 7498 Email: [email protected] Contact person: Mr. Alberto Andrade Preferred Makers represented: Libra-Plast AS Gellweiler Travessa De Alecrim 3-2 PT-1200 Lisboa PORTUGAL Telephone: +351 21 340 7160 Telefax: +351 21 340 7169 Contact person: Rui Texeira Preferred Makers represented: Norsafe AS

513_558_SR-Geo_2016.indd 541 07.08.2016 11:47:51


542

Quicklog Lda Casais do Chafariz 28 PT-2565-774 Turcifal PORTUGAL Email: [email protected] Preferred Makers represented: Optimarin AS Stahl, S.A., Industrias sucursal em Portugal, Largo Piramide no 3 M Sala E Gab. 7 PT-2795-156 Linda-a-Velha (Conceio Oeiras), Lisboa PORTUGAL Telephone: +351 21 4145315 Telefax: +351 21 4145317 Email: [email protected] Preferred Makers represented: Tranberg A.S.

QATARPetroleum Technology Co. W.L.L. 8th Floor, Toyota Tower P.O. Box 16069 Doha QATAR Telephone: +974 441 96 03 Telefax: +974 441 96 04 Email: [email protected] Contact person: Mr. Jassim Jacob www.petrotec.com.qa Preferred Makers represented: Norsafe AS

ROMANIAMartrade Srl. 13, Domneasca Street RO-6200 Galatzi ROMANIA Telephone: +40-236 460 814 Telefax: +40-236 436 930 Email: [email protected] Contact person: Marian Vasile Preferred Makers represented: AF Offshore AeronMollier AS Finnøy Gear & Propeller AS Teamtec A/S

RUSSIAGET Ltd. Business Center “GRANI”, Furazhny Pereulok, Bld 3 liter “K”, Office 413 RU-191 015 St. Petersburg RUSSIA Telephone: +7 812 449 46 26 Telefax: +7 812 449 46 43 Email: [email protected] Contact person: Kirill Golubev Preferred Makers represented: Norsafe AS Gildor United ApS Moscow RUSSIA Telephone: +7 495 913 67 10 Telefax: +7 495 913 67 14 Email: [email protected] Contact person: Olga N. Murdygina Preferred Makers represented: Norsafe AS

513_558_SR-Geo_2016.indd 542 07.08.2016 11:47:51

543


Interprombribor 6th floor No. 10, Zvyozdnyi bulvar 21 RU-129085 Moskau RUSSIA Telephone: +7 495 6163252 Telefax: +7 495 6163464 Email: [email protected] Preferred Makers represented: Tranberg A.S. Kongsberg Maritime Tech LLC Ul. Rizhskaya, Building 1, Office 407 RU-195196 St. Petersburg RUSSIA Telephone: +7 812 495 56 06 Telefax: +7 812 495 56 06 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Marine Bridge & Navigation Systems 19, Promyshlennaya str. RU-198099 St. Petersburg RUSSIA Telephone: +7 812 320 3840 Telefax: +7 812 320 3848 Email: [email protected] Preferred Makers represented: Tranberg A.S. Marine Propulsion Systems Admiral Business Centre, office 459, Na6, Oguodongo Kan 118 RU-190005 St. Petersburg RUSSIA Telephone: +7 812 441 3807 Telefax: +7 812 441 38 09 Email: [email protected] Contact person: Sergey B. Sumkin Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS

North West Service Ltd. Tavricheskaya str. 19-13 RU-191015 St. Petersburg RUSSIA Telephone: +7 812 2757832 Telefax: +7 812 320 014 6 Email: [email protected] Contact person: Mr. Pavel Lastochkin, Director www.nws-spb.ru Preferred Makers represented: Teamtec A/S SBS Ltd. Obvodniy canal, 138-96, office 447 RU-190020 St.Petersburg RUSSIA Telephone: ( 00) 7 (812) 495-94-20 Telefax: ( 00) 7 (812) 495-94-20 Email: [email protected] www.sbs-spb.ru Preferred Makers represented: Harding Safety AS Teknotherm Marine HVAC - St. Petersburg Repr. office Korablestriteley dom 32, Korpus 1, office 35N RU-RU-199 397 St. Petersburg RUSSIA Telephone: +7 812 946 9954 Email: [email protected] Preferred Makers represented: Teknotherm Marine A/S

513_558_SR-Geo_2016.indd 543 07.08.2016 11:47:51


544

SINGAPOREAlliance Safety Pte Ltd Block 3016 Bedok North Avenue 4, #06-06 Eastech SG-489947 Singapore SINGAPORE Telephone: +65 65424131 Email: [email protected] Contact person: Stanley Anthony Preferred Makers represented: Hansen Protection AS Bridon Singapore (PTE) Ltd. Jurong Town P.O. Box 390 SG-9161 Singapore SINGAPORE Telephone: 65-2664811 Telefax: 65-2654100 Preferred Makers represented: Masto Wire Service A/S Caspian Marine Services Pte Ltd. (Marine Lighting) TradeHub 21, 18 Boon Lay Way #06-108 SG-609966 Singapore SINGAPORE Telephone: +65 68468180 Telefax: +65 68468011 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Caspian Marine Services Pte. Ltd. Tradehub 21, 18 Boon Lay Way #06-108 SG-609966 Singapore SINGAPORE Telephone: + 65 68 46 81 80 Mob.phone: +65 96 89 99 89 Telefax: Telefax: + 65 68 46 80 11 Email: [email protected] Contact person: Reeve Tan Preferred Makers represented: AF Offshore AeronMollier AS EMS Ship Supply (Singapore) Pte Ltd 7, Kian Teck Drive SG-628824 Singapore SINGAPORE Telephone: +65 6261 1600 Telefax: +65 6261 1500 Email: [email protected] Contact person: Barry Heng www.ems-shipsupply.com Preferred Makers represented: Hansen Protection AS Gimex Pte. Ltd. 151 Chin Swee Road # 02-22, Manhattan House SG-169876 Singpore SINGAPORE Telephone: +65 67350278 Telefax: +65 67350279 Email: [email protected] Contact person: Mr. Henry Oh www.gimex.com Preferred Makers represented: EuroRope Marine AS

513_558_SR-Geo_2016.indd 544 07.08.2016 11:47:51

545


Goltens Singapore Pte. Ltd. 6A, Benoi Road SG-629881 Singapore SINGAPORE Telephone: +65 6861 5220 Telefax: +65 6861 1037 Email: [email protected] Contact person: Mr. Tony Chan Preferred Makers represented: Teamtec A/S Jason Electronics (Pte) Ltd. Blk 194 Pandan Loop #06-05, Pantech Industrial Complex SG-128383 Singapore SINGAPORE Telephone: +65 8720211 Telefax: +65 8721800 Contact person: Ronald Tan Preferred Makers represented: Comrod Communication A/S Kongsberg GeoAcoustics Pte Ltd. 30 Loyang Way, #07-12 SG-508769 Singapore SINGAPORE Telephone: +65 6546 3687 Telefax: +65 6546 3690 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Pte. Ltd. 81 Toh Guan Rd East, #04-01/02 Secom Centre SG-608606 Singapore SINGAPORE Telephone: +65 6411 6400 Telefax: +65 6411 6401 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Maritime Partner Asia Pte Ltd. Pioneer Lot, 31B Benoi Road SG-627780 Singapore SINGAPORE Telephone: +65 9820 1095 Telefax: +65 6795 8908 Contact person: Arne Dybvik Preferred Makers represented: Maritime Partner AS MG Insulation & Marine Service Pte Ltd 4 Soon Lee Road SG-628071 Singapore SINGAPORE Telephone: +65 6264 0868 Telefax: +65 6264 0878 Email: [email protected] Preferred Makers represented: Optimarin AS Mischling Engineering Pte LTD TradeHub 21, 18 Boon Lay way, #02-111 SG-609966 Singapore SINGAPORE Telephone: +65 68 46 81 80 Telefax: +65 68468011 Email: [email protected] Contact person: Reeve Tan Preferred Makers represented: Parat Halvorsen A-S NOREQ Pte Ltd No. 232, Tuas South Avenue 2, West Point BizHub SG-637221 Singapore SINGAPORE Telephone: +65 6896 8027 Email: [email protected] Preferred Makers represented: Harding Safety AS

513_558_SR-Geo_2016.indd 545 07.08.2016 11:47:51


546

Radio Holland BV 8A Tuas Avenue 12 SG-2263 Singapore SINGAPORE Telephone: +65-8622218 Telefax: +65-8622430 Contact person: Mr. Danny Tan Preferred Makers represented: Comrod Communication A/S Scanvik Marine Services Pte. Ltd. 31B Benoi Road, pioneer lot Singapore SINGAPORE Telephone: +65-67 95 78 87 Telefax: +65-67 95 89 08 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Anda-Olsen AS Brunvoll A.S Finnøy Gear & Propeller AS Scanvik Marine Services Pte. Ltd. SINGAPORE Telephone: +65 6863 2070 Telefax: +65 6261 5255 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Libra-Plast AS Springer-Ems Pte. Ltd. (Helideck Lighting) 66 Tannery Lane, #06-05 Sindo Building SG-347805 Singapore SINGAPORE Telephone: +65 67453300 Telefax: +65 67466374 Email: [email protected] Preferred Makers represented: Tranberg A.S.

SOUTH AFRICATamarix Marine CC t/a Sea Power Tyger Valley 7536 P.O. Box 3723 Cape Town SOUTH AFRICA Telephone: +27-21-551 9192 Telefax: +27-21-552 9326 Email: [email protected] Contact person: Piet de Klerk Preferred Makers represented: Finnøy Gear & Propeller AS Norsafe AS Teknotherm Marine A/S

SPAINEquipos Nornaval S.A. C/García Barbón, 89 - 3º ES-36201 Vigo SPAIN Telephone: + 34 91 575 2960 Telefax: + 34 91 578 3898 Email: [email protected] Contact person: Rafael Gutiérrez www.scel.no Preferred Makers represented: AF Offshore AeronMollier AS Brunvoll A.S Libra-Plast AS Gandara & CIA. S.A., J.L. Acebal Idigoras 2-4 ES-48002 Bilbao SPAIN Telephone: +34-4232339 Telefax: +34-4249007 Preferred Makers represented: Masto Wire Service A/S Tranberg A.S.

513_558_SR-Geo_2016.indd 546 07.08.2016 11:47:51

547


Marsys SA Avda. General Peron, 8-7 B ES-28020 Madrid SPAIN Telephone: +34 91 572 32 19 / 572 32 61 Telefax: +34 91 572 32 13 Email: [email protected] www.marsys.org Preferred Makers represented: Norsafe AS Optimarin AS Teamtec A/S Noko Land & Marine Irun SPAIN Email: [email protected] www.nokolandmarine.com Preferred Makers represented: EuroRope Marine AS Pasch Capitán Haya 9 ES-28020 Madrid SPAIN Telephone: +34 91 598 37 77 Telefax: +34 91 555 13 41 Email: [email protected] Contact person: Juan Antonio Azpiazu www.pasch.es Preferred Makers represented: Maritime Partner AS Pasch Y Cia Capitan Haya 9 ES-28020 Madrid SPAIN Telephone: +34 91 598 37 60 Telefax: +34 91 555 13 41 Contact person: Juan Antonio Azpiazu Preferred Makers represented: Parat Halvorsen A-S

Sedni S.A. C/. Santo Domingo s/n, Edificio Alauda L/C no. 6 ES-03005 Alicante SPAIN Telephone: +34 96 598 2193 Telefax: +34 96 592 3065 Email: [email protected] Contact person: Jose Miguel Garcia Cordoba Preferred Makers represented: Finnøy Gear & Propeller AS Harding Safety AS Simrad - Spain S.L. Partida Torres no 38, Naves 8 y 9 ES-03570 Villajoyosa - Alicante SPAIN Telephone: +34 96 681 01 49 Telefax: +34-96-685 23 04 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

SRI LANKANorinco PVT Ltd. No. 302/43, Dr. C.V.S. Corea MW, Victory Gardens Hokandara SRI LANKA Telephone: 011 215 6629 Email: [email protected] www.norinco.co.in Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 547 07.08.2016 11:47:51


548

SWEDENBridon Svenska A.B Lundbyhamnen 122 Box 8713 SE-402 75 Gøteborg SWEDEN Telephone: 46-0-31508650 Telefax: 46-0-31518281 Contact person: Liss Henriksson Preferred Makers represented: Masto Wire Service A/S Clean Ship Scandinavia AB Sodra Kroksdal 67 SE-SE - 47 133 Skarhamn SWEDEN Telephone: +46 736 791 399 Email: [email protected] www.cleanship-scandinavia.com Preferred Makers represented: Optimarin AS Comrod Sweden AB Wibevägen 1 SE-79227 Mora SWEDEN Telephone: +46 70 216 1122 Telefax: +46 250 10392 Email: [email protected] Preferred Makers represented: Comrod Communication A/S

Meson AB Kullgårdsvägen 27 SE-312 34 Laholm SWEDEN Telephone: +46 430 295 00 Telefax: +46 430 171 91 Email: [email protected] Contact person: Bengt-Olof Wesslén www.meson.se Preferred Makers represented: Meson AS Norrkust Marina Varvs AB Industriområdet SE-952 95 Båtskärnäs SWEDEN Telephone: 0923-67 02 72 Email: [email protected] www.norrkustmarina.se Preferred Makers represented: Hansen Protection AS Yara Marine Technologies Gamla Almedalsvägen 21C SE-412 63 Gothenburg SWEDEN Telephone: +46 31 31 340 39 Email: [email protected] www.greentechmarine.com Preferred Makers represented: Yara Marine AS

TAIWANAlula S.A. 6F, No. 9, Lane 3, Min Sheng West Road TW-104 Taipei TAIWAN Email: [email protected] Preferred Makers represented: Optimarin AS

513_558_SR-Geo_2016.indd 548 07.08.2016 11:47:51

549

SALES REPRESENTATIVES - Geographical List LSC Multech Co., Ltd. 7F, No. 431, Fu-Hsing N Rd,, Songshan District TW-TW 105 Taipei TAIWAN Telephone: Songshan District Telefax: +886-2-8712-2557 Email: [email protected] Contact person: Mrs. Joyce Chen / Ronnie Chen www.lscmultech.com.tw Preferred Makers represented: Teamtec A/S Seven Seas Electronics Co., Ltd. 6th Floor-1, No. 288-9, Shin Ya Road, Chien Chen District Kaohsiung TAIWAN Telefax: +886-7-815 1775 Contact person: Mr. Johnny Lin Preferred Makers represented: Comrod Communication A/S

TURKEYBetuMar Import/Export Ltd. Evliya Çelebi Mh., Gizem Sokak No: 11 Dükkan: 1 TR-34945 Tuzla - Kadiköy TURKEY Telephone: +90 216 447 31 91 Telefax: +90 216 447 31 93 Email: [email protected] Contact person: Serge van der Haegen www.betumar.com Preferred Makers represented: Finnøy Gear & Propeller AS

Ilkfer Group Guzelyali Mah.Sahil Bulvari, Cad.Deniz Sokak No. 54/2, Guzelyali/Pendik Istanbul TURKEY Telephone: +90 216 493 09 62 Telefax: +90 216 493 09 69 Email: [email protected] www.uniservice.com.tr Preferred Makers represented: Optimarin AS Kas Pazariama A.S. Sedat Simavi Sokak TR-52/2 Cankaya Ankara TURKEY Telephone: +90 312 441 8385 Telefax: +90 312 441 4336 Email: [email protected] Preferred Makers represented: Tranberg A.S. Nemomarin TIC. MÜH. Denizcilik A.S. Aydintepe Mah. Sahilyolu Bulvari, Alize Is Merkezi No.191/56 TR-34947 Tuzla-Istanbul TURKEY Telephone: +90 216 392 92 02 Telefax: +90 216 392 92 05 Email: [email protected] Contact person: Mete Tarihmen www.nemomarin.com Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 549 07.08.2016 11:47:51


550

Oceanist Deniz Araclari Muh. Mum. San ve Tic. LTD STI. Kavacik Mah. F.S.M. Cad., Yayabeyi Sk. No:2/13 TR-34810 Beykoz / Istanbul TURKEY Telephone: +90 216 701 19 03 Telefax: +90 216 701 19 23 Email: [email protected] Contact person: Mr. Umur CULHA www.oceanist.com Preferred Makers represented: Libra-Plast AS Oceanist Engineering Ltd. Kavacik Mah. F.S.M. Cad. Yayabeyi Sk. No.: 2/13 TR-34810 Beykoz - Istanbul TURKEY Telephone: +90 216 701 1903 Telefax: +90 216 701 1923 Email: [email protected] Contact person: Umur Culha Preferred Makers represented: Brunvoll A.S Parat Halvorsen A-S Onursan Co. Ltd. Icmeler, Rauf Orbay Cad., Gul Sok. No. 8 Turzla - Istanbul TURKEY Telephone: +90 216 395 82 27 Telefax: +90 216 395 04 60 Email: [email protected] Contact person: Mr. Barbaros Onur www.onursan.net Preferred Makers represented: Norsafe AS

Senak Marine Ind. and Trading Co. Ltd. Senak Denizcilik San san ve tic ltd sti, Aydintepe Mah. Sahilyolu Cad., Denizciler Tic. Mrkz. No:25 Kat:2 TR-43 34947 Tuzla Istanbul TURKEY Telephone: +90 216 392 69 92. Mob. phone: +90 532 287 54 40 Telefax: +90 216 392 65 05 Email: [email protected] Contact person: Hasan Ufuk Gölek www.senak.com Preferred Makers represented: AF Offshore AeronMollier AS Teknotherm Marine HVAC - Istanbul Repr. office Yala Mah. Vatan Meka is Merkezi, No: 58/15 Tuzla - Istanbul TURKEY Telephone: +90 533 332 83 97 Email: [email protected] Preferred Makers represented: Teknotherm Marine A/S

UNITED ARAB EMIRATESAxon Group DMCCO / Axon Offshore Group S.A. Dubai Maritime City, P.O. Box 124974 Dubai UNITED ARAB EMIRATES Telephone: +971 505 054584 Email: [email protected] Contact person: Rajiv Saigal Preferred Makers represented: Brunvoll A.S

513_558_SR-Geo_2016.indd 550 07.08.2016 11:47:51

551


Bridon Middle East P.O. Box 16931 Dubai UNITED ARAB EMIRATES Telephone: 084-35129 Telefax: 084-35689 Preferred Makers represented: Masto Wire Service A/S Comrod Communication Jebel Ali Free Zone P.O Box 18214 Duvai UNITED ARAB EMIRATES Telephone: +971 50 531 6723 Telefax: +971 4 802 7001 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Consilium Middle East (FZC) B3-22, SAIF Zone P.O.Box 8018 Sharjah UNITED ARAB EMIRATES Telephone: +971 6 55 70 740 Telefax: +971 6 55 70 741 Email: [email protected] Contact person: Mr. K.P. Krishnan www.consilium.ae Preferred Makers represented: Teamtec A/S

KDU Worldwide Technical Services Fzc P6-171, Saif Zone P.O. Box #9567 Sharjah UNITED ARAB EMIRATES Telephone: +971-6-5575480 Telefax: +971-6-5575490 Email: [email protected] Contact person: Ralph Cabral, Director Technical Preferred Makers represented: AF Offshore AeronMollier AS Kongsberg Maritime Middle East DMCCO Dubai Investment Park, Falcon House Dubai UNITED ARAB EMIRATES Telephone: +971-4-8991800 Telefax: +971-4-8991801 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS NOREQ FZE Office No. 6WA 633, Dubai Airport Freezone PO Box : 121707 Dubai UNITED ARAB EMIRATES Telephone: +971 4 2602748 Telefax: +971 4 2602750 Email: [email protected] Preferred Makers represented: Harding Safety AS

513_558_SR-Geo_2016.indd 551 07.08.2016 11:47:51


552

Ocean Fair International LLC Dubai Investments Park - Phase II, Near Abu Dhabi Pipe Factory (ADPF) Dubai UNITED ARAB EMIRATES Telephone: +971 4 8849555 Telefax: +971 4 8849557 Email: [email protected] www.oceanfair.com Preferred Makers represented: EuroRope Marine AS Stahl Middle East FZE, R. P.O. Box 17784 Dubai UNITED ARAB EMIRATES Telephone: +971 4 8835855 Telefax: +971 4 8834685 Email: [email protected] Preferred Makers represented: Tranberg A.S. Ulmatec DMCCO Office 604, Maritime Business Centre Building, Dubai Maritime City (DMC) Dubai UNITED ARAB EMIRATES Telephone: +971 4 4476669 (Office) Telefax: +971 4 3688526 Email: [email protected] Contact person: Rajesh Kamath www.ulmatec.no Preferred Makers represented: Finnøy Gear & Propeller AS

UNITED KINGDOMBridon International - Certex Doncaster, Carr Hill GB-DNU 8DG Doncaster, South Yorkshire UNITED KINGDOM Telephone: +44-302-344010 Telefax: +44-302-640449 Preferred Makers represented: Masto Wire Service A/S Christie + Gray Ltd Morley Road, Tonbridge GB-TN9 1RA Kent UNITED KINGDOM Telephone: +44 1732 371100 Telefax: +44 1732 359666 Email: [email protected] www.christiegray.com Preferred Makers represented: Centa Transmisjoner A.S. Forbes Refrigeration Ltd. Station Road GB-AB41 9AY Ellon, Aberdeenshire, Scotland UNITED KINGDOM Telephone: +44-1358-72 08 53 Telefax: +44-1358-72 18 98 Contact person: Gordon Forbes Preferred Makers represented: Teknotherm Marine A/S Hydroid Europe Unit 3, Basepoint Enterprise Centre Anderson’s Road GB-SO14 5FE Southampton UNITED KINGDOM Telephone: +44-2380-682-388 Telefax: +44-2380-682-389 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

513_558_SR-Geo_2016.indd 552 07.08.2016 11:47:51

553

SALES REPRESENTATIVES - Geographical List International Safety Products Ltd Orrell Mount, 159 Hawthorne Road GB-L20 6JU Bootle UNITED KINGDOM Telephone: +44 (0)151 922 2202 Email: [email protected] www.ispl.co.uk Preferred Makers represented: Hansen Protection AS Kongsberg GeoAcoustics Ltd Shuttleworth Close, Gapton Hall Industrial Estate GB-NR31 0NQ Great Yarmouth UNITED KINGDOM Telephone: +44 1493 600 666 Telefax: +44 1493 651 100 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd Campus 1, Aberdeen Innovation Park, Balgownie, Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd Campus 1, Aberdeen Science & Tecnology Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 12 24 22 65 00 Telefax: +44 12 24 22 65 01 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Kongsberg Maritime Ltd. 11 The Briars Waterberry Drive, Waterlooville GB-PO7 7YH Portsmouth UNITED KINGDOM Telephone: +44 023 9224 7800 Telefax: +44 023 9224 7808 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. Airport Industrial Estate, Wick GB-KW1 4QS Caithness UNITED KINGDOM Telephone: +44 1 955 603 606 Telefax: +44 1 955 607 520 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. - Offshore Campus 1 , Aberdeen Innovation Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Training & Simulation Centre 15 Abercrombie Court, Prospect Road, Arnhall Business Park GB-AB32 6FE Westhill, Aberdeen UNITED KINGDOM Telephone: +44 1224 617 670 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

513_558_SR-Geo_2016.indd 553 07.08.2016 11:47:51


554

Marine Systems (UK) Ltd. 18 Heron Close, Sawbridgeworth GB-CM21 0BB Herts UNITED KINGDOM Telephone: +44 7889 0287 29 Contact person: Basil Black Preferred Makers represented: Finnøy Gear & Propeller AS MRH Marine Ltd. No. 3 Crofthead Mill, Lochlibo Road, Neilston GB-G78 3NA Glasgow UNITED KINGDOM Telephone: +44-141 880 6939 Telefax: +44-141 881 3600 Email: [email protected] Contact person: Mr. Bill Higginbotham Preferred Makers represented: Libra-Plast AS Ships Electronic Services Ltd. Waterside Court, Neptune Close GB-ME2 4NZ Rochester, Kent UNITED KINGDOM Telephone: +44 1634-29 55 00 Telefax: +44 1634-29 55 37 Email: [email protected] Contact person: Ms. Stephen Pedgrift Preferred Makers represented: Comrod Communication A/S Stahl Ltd., R. Stahl House, 43 Elmdon Trading Estate GB-B37 7HE Birmingham UNITED KINGDOM Telephone: +44 121 767 6400 Telefax: +44 121 767 6490 Email: [email protected] Preferred Makers represented: Tranberg A.S.

Wear Dock & Engineering Co. South Dock, Sunderland GB-SR1 2EE Tyne & Wear UNITED KINGDOM Telephone: +44-191 567 4749 Telefax: +44-191 510 0765 Email: [email protected] Contact person: Harry Wilson www.weardock.co.uk Preferred Makers represented: Brunvoll A.S

UNITED STATESCertex P.O. Box 18428 US-TX 77223 Houston UNITED STATES Telephone: 713-921 4101 Telefax: 713-931 4493 Contact person: Tom Hana Preferred Makers represented: Masto Wire Service A/S Comrod Inc. 12830 Triskett Road US-44111 Cleveland, Ohio UNITED STATES Telephone: 216-252-6610 Telefax: 216-252-6615 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Diamond Braid International P.O. Box 6540 US-TX 77325 Kingwood UNITED STATES Telephone: 888-643-4096 Email: [email protected] www.diamondbraidintl.com Preferred Makers represented: EuroRope Marine AS

513_558_SR-Geo_2016.indd 554 07.08.2016 11:47:51

555

SALES REPRESENTATIVES - Geographical List Environmental Marine Partners, LLC 915 8th street unit #204 US-FL 33139 Miami Beach UNITED STATES Telephone: +1 78 63 59 46 35 Telefax: +1 78 63 59 46 35 Email: [email protected] Contact person: Bjørn Erik Hansen Preferred Makers represented: Parat Halvorsen A-S FPS-Corpus Christi 4221 Beacon Street US-TX 78405 Corpus Christi UNITED STATES Telephone: (361) 289-9102 Telefax: (361) 289-1421 Preferred Makers represented: Hansen Protection AS FPS-Houston 8050 Harrisburg Blvd. US-TX 77012 Houston UNITED STATES Telephone: (713)-924-9600 Telefax: (713) 923-6272 Email: [email protected] www.fps-usa.com Preferred Makers represented: Hansen Protection AS FPS-New Orleans 821 Industry Road US-LA 70062 Kenner UNITED STATES Telephone: (504) 466-8003 Telefax: (504) 469-9922 Email: [email protected] Preferred Makers represented: Hansen Protection AS

GlobalSim Inc. 12577 South 265 West, Suite 3A, US-84020 Draper, Utah UNITED STATES Telephone: +1 800 979 9728 Telefax: +1 801 571 9535 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS GTA Marine 33 Krauser Road, Downingtown US-PA 19335 Thorndale UNITED STATES Telephone: +1 610 321 0300 Telefax: +1 610 321 0609 Email: [email protected] Contact person: Mr. Gerard Bourgeault / Mob: +1 610 999 1840 www.gtamarine.com Preferred Makers represented: Teamtec A/S Hydroid Inc. 6 Benjamin Nye Circle US-MA 02559-4900 Pocasset UNITED STATES Telephone: +1 508 563 6565 Telefax: +1 508 563 3445 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Issaquah Trading 4622 174th PL SE US-WA 98006 Bellevue UNITED STATES Telephone: +1 425 830 4154 Email: [email protected] Contact person: Mr. Per N. Thomassen Preferred Makers represented: Teamtec A/S

513_558_SR-Geo_2016.indd 555 07.08.2016 11:47:51


556

Issaquah Trading 4622 174th Pl. Se. US-98006 Bellevue UNITED STATES Telephone: +1 425-830-4154 Email: [email protected] Preferred Makers represented: Teamtec A/S Kongsberg Maritime Inc. 150 James Drive East, Suite 160 US-LA 70087 Saint rose UNITED STATES Telephone: +1 504 712 2799 Telefax: +1 504 712 7986 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Inc. 5373 W. Sam Houston Parkway N, Suite 200 US-TX 77041 Houston UNITED STATES Telephone: +1 713 329 5580 Telefax: +1 713 329 5581 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Simulation Inc. 70 Essex Street P.O. Box 180 US-CT 06388-0180 West Mystic UNITED STATES Telephone: +1 860 536 1254 Telefax: +1 860 536 0923 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS

Noreq LLC 3410 W. Dallas Ste. 239 US-TX 77019 Houston UNITED STATES Telephone: +1 713 589 3161 Email: [email protected] Preferred Makers represented: Harding Safety AS Ocean Power & Equipment Co. 1140 Bloomfield Avenue, Suite 107 US-NJ 07006 West Caldwell UNITED STATES Telephone: +1 973 575 5775 Telefax: +1 973 575 5850 Email: [email protected] Preferred Makers represented: Optimarin AS Pilot Marine 2751 Parsons Rest US-FL 32309 Talahassee UNITED STATES Telephone: (850) 893-5730 Telefax: (850) 668-0822 Email: [email protected] Contact person: Mr. Jon Denton Smith Preferred Makers represented: Comrod Communication A/S Radio Holland USA 8943 Gulf Freeway US-TX 77017 Houston UNITED STATES Telephone: +1-713-9433325 Telefax: +1-713-9433802 Email: [email protected] Contact person: Johnny Hamby Preferred Makers represented: Comrod Communication A/S

513_558_SR-Geo_2016.indd 556 07.08.2016 11:47:51

557


Scan Pacific Marine, LLC 909 West Esplanade Avenue, Suite 104 US-LA 70065 Kenner UNITED STATES Telephone: +1 504 466 5788 Telefax: +1 504 466 5703 Email: [email protected] Contact person: Sandra Kleven www.scanpacificmarine.com Preferred Makers represented: Norsafe AS Ships Machinery International Inc. 12380 s.w. 130 th street US-33186 Miami, Florida UNITED STATES Telephone: +1 305 234 5693 Telefax: +1 305 234 5694 Email: [email protected] Contact person: Arthur Dewey www.shipsmachinery.com Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS SMI Ships Machinery International, Inc. 13005 SW 124 Ave US-FL 33186 Miami UNITED STATES Telephone: +1 305 234 5693 Telefax: +1 305 234 5694 Email: [email protected] Contact person: Mr. Arthur Dewey Preferred Makers represented: Maritime Partner AS

Stahl Inc., R. 9001 Knight Road US-TX 77054 Houston UNITED STATES Telephone: +1 713 7929300 Telefax: +1 713 7929301 Email: [email protected] Preferred Makers represented: Tranberg A.S.

VENEZUELAOmega SSP Calle 61 Entre Av. 3E Y 3F, No. 3E-49, Sector Las Mercedes, Maracaibo 4002 Zulia VENEZUELA Telephone: +58 261 792 2616 Telefax: +58 261 792 5268 Email: [email protected] Contact person: Mr. John Ketchum Preferred Makers represented: Norsafe AS

VIETNAMMTS Co., Ltd (Marine Trade Services Ltd) R 1207 Vuon Xuan Building, 71 Nguyen Chi Thanh Street Hanoi VIETNAM Telephone: +84 4 62 75 86 22 Telefax: +84 4 62 75 86 23 Email: [email protected] Contact person: Mr. Hoang Tuan Anh Preferred Makers represented: Libra-Plast AS

513_558_SR-Geo_2016.indd 557 07.08.2016 11:47:52


558

MTS International JSC R1207 - Vuon Xuan Bld., 71 Nguyen Chi Thanh Str. Hanoi VIETNAM Telephone: +84 4 7623499. Telefax: +84 4 7623476 Email: [email protected] Contact person: Mr. Hoang Tuan Anh Preferred Makers represented: AF Offshore AeronMollier AS Teamtec A/S Tranberg A.S. Phong Viet Co. Ltd. 45 Road No. 32, Tanphong Ward, District 7 HoChiMinh City VIETNAM Telephone: +84 8 377 17 179 Telefax: +84 8 377 15 791 Email: thuan2phongvieco.com Contact person: Tran Dinh Thuan www.phongvietco.com Preferred Makers represented: Norsafe AS

513_558_SR-Geo_2016.indd 558 07.08.2016 11:47:52

559

Foreign Factory / Country Referance inProducer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent

FOREIGN FACTORIES /PRODUCERS / SUPPLIERS

REPRESENTED

559_562_Ag_2016.indd 559 07.08.2016 11:48:02

560

Foreign Factory / Country Referance in Producer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent

A.B. Marine d.o.o. Croatia Alu Design & Services ASAcco Trade Spain Alu Design & Services ASAquafides Austria Alfsen og Gunderson ASAquanautic Agencies Pte. Singapore Alu Design & Services ASArmatech FTS GmbH Germany Alfsen og Gunderson ASASV Stuebbe GmbH & Co. KG Germany Alfsen og Gunderson ASAtlas HF Iceland Alu Design & Services ASBehrens Pumpenfabrik GmbH & Co., Henrich

Germany MA PG Flow Solutions AS

Benson Marine Services Pvt.Ltd. India Alu Design & Services ASBitzer Kühlmaschinenbau GmbH Germany Teknotherm Marine A/SBock Kältemaschinen GmbH Germany Teknotherm Marine A/SBoll & Kirch Filterbau GmbH Germany Alfsen og Gunderson ASBornemann GmbH, Joh. Heinr. Germany MA PG Flow Solutions ASBrook Marine Equipment Trading Company LLC

United Arab Emirates Alu Design & Services AS

Carrier Transicold United States MA Teknotherm Marine A/SCenta Antriebe Kirschey GmbH Germany MA Centa Transmisjoner A.S.Chemineer, Ltd. United Kingdom MA Alfsen og Gunderson ASDanaher Motion Sweden MA Centa Transmisjoner A.S.Danfoss Marine Systems A/S (IPH) Denmark Teknotherm Marine A/SDickow Pumpen KG Germany Alfsen og Gunderson ASEDUR Pumpenfabrik GmbH Germany Alfsen og Gunderson ASFeluwa Pumpen GmbH Germany PG Flow Solutions ASFertigung GmbH, Wilhelm Sander Germany Meson ASFrigidaire United States Teknotherm Marine A/SHoenderop BV, P. Netherlands, The Alu Design & Services ASHyde Marine United States PG Flow Solutions ASIn-Mar Solutions Inc. United States Alu Design & Services ASKinetico Inc. United States MA Alfsen og Gunderson ASKral-Lustenau Austria MA PG Flow Solutions ASMalmedie Antriebstechnik GmbH. Germany MA Centa Transmisjoner A.S.Marant Polska Sp. z o.o. Poland Alu Design & Services ASMarine & Offshore Equipment GmbH & Co

Germany Alu Design & Services AS

Mayekawa Mfg. Co. Japan MA Teknotherm Marine A/SMeson AB Sweden MA Meson ASMeson AB Sweden MA Meson ASMeson ApS Denmark MA Meson ASMeson Far East Singapore MA Meson ASMeson s.r.l. Romania MA Meson AS

559_562_Ag_2016.indd 560 07.08.2016 11:48:02

561

Foreign Factory / Country Referance inProducer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent

Meson Shanghai Chile MA Meson ASMeson Spain SL Spain MA Meson ASMeson Valves BV Netherlands, The MA Meson ASMRU Air fair Germany MA Fremo ASNemomarin TIC. MÜH. Denizcilik A.S. Turkey Alu Design & Services ASOBL Dosing Pumps Italy Alfsen og Gunderson ASOffshore & Industrial Security Technology Brokers

Mexico Alu Design & Services AS

PG Construction AS Norway MA PG Flow Solutions ASPG Hydraulics AS Norway MA PG Flow Solutions ASProMinent GmbH Germany PG Flow Solutions ASRagazzini Italy Alfsen og Gunderson ASRamson AB Sweden Alfsen og Gunderson ASRefComp S.p.A Italy Teknotherm Marine A/SRexnord Antriebstechnik Germany MA Centa Transmisjoner A.S.Ruhrpumpen Manufacturing Plant Germany PG Flow Solutions ASRui Neiva Representacões Ltda. Brazil Alu Design & Services ASSamson Pumps AS Denmark PG Flow Solutions ASSBS Ltd. Russia Alu Design & Services ASSeepex GmbH + Co. KG Germany PG Flow Solutions ASSeibu Giken DST AB Sweden MA Alfsen og Gunderson ASSeybert & Rahier Germany Alfsen og Gunderson ASShanghai Wanji Trade Co., Ltd. China Alu Design & Services ASSondex A/S Denmark MA PG Flow Solutions ASSpeck GmbH & Co. KG, Walter - Speck Pumpen


Speck Triplex GmbH & Co. KG - Speck Triplex Pumpen


Speck-Pumpenfabrik-Hilpoltstein Germany MA PG Flow Solutions ASSPX Airpel Filtration United Kingdom Alfsen og Gunderson ASSteinen Mfg. Co., Wm United States MA Fremo ASStelio Bardi SRL Italy Alu Design & Services ASSundyne Marelli Spain Alfsen og Gunderson ASThermon Europe B.V. Netherlands, The MA Tranberg A.S.Tideland Signal Ltd. United Kingdom MA Tranberg A.S.Tokyo Sangyo Co. Ltd., Infrastructure Dept. B

Japan Alu Design & Services AS

Wepuko Pahnke GmbH Germany PG Flow Solutions ASWinter.Pumpen GmbH Germany PG Flow Solutions ASXylem United States PG Flow Solutions ASYamada Europe (Holland) Netherlands, The Alfsen og Gunderson ASYork United Kingdom Teknotherm Marine A/S

559_562_Ag_2016.indd 561 07.08.2016 11:48:02

562

Foreign Factory / Country Referance in Producer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent

559_562_Ag_2016.indd 562 07.08.2016 11:48:02

563

TRADE MARKS SUPPLIER

TRADE MARKS

563_568_TM_2016.indd 563 07.08.2016 11:48:43

564


ABS Saint-Gobain WeberAERON AF Offshore AeronMollier ASAG POTABLE WATER UNIT Alfsen og Gunderson ASAIRDEL Alfsen og Gunderson ASALLWEILER Parat Halvorsen A-SALUSAFE Maritime Partner ASALUTECH Alu Design & Services ASANDA POWER SOLUTIONS Anda-Olsen ASANELLO Fremo ASAPEX PUMPS Alfsen og Gunderson ASAQUA FILTERTEKNIKK Enwa Water Technology ASAQUAFIDES Alfsen og Gunderson ASARI ARMATUREN Parat Halvorsen A-SASCO FILTRI Alfsen og Gunderson ASASV STUEBBE Alfsen og Gunderson ASAUTOCHIEF Kongsberg Maritime ASAZIMUTH Brunvoll A.SBAILEY Anda-Olsen ASBANNER Anda-Olsen ASBEARING MASTER Kongsberg Maritime ASBEHRENS PG Flow Solutions ASBERGEN LTT Palfinger Marine Norway ASBOLL & KIRCH Alfsen og Gunderson ASBORNEMANN PG Flow Solutions ASBRUNVOLL Brunvoll A.SBSD Centa Transmisjoner A.S.BUOYANT WINCHLINE EuroRope Marine ASCALDER PG Flow Solutions ASCENTADISC Centa Transmisjoner A.S.CENTAFLEX Centa Transmisjoner A.S.CENTAJOINT Centa Transmisjoner A.S.CENTALINK Centa Transmisjoner A.S.CENTAMAX Centa Transmisjoner A.S.CENTASTART Centa Transmisjoner A.S.CENTAX Centa Transmisjoner A.S.CHEMINEER Alfsen og Gunderson ASCITY Ekornes Contract ASCOMROD Comrod Communication A/SDANAHER Centa Transmisjoner A.S.DANFOSS Parat Halvorsen A-SDANFOSS Fremo ASDARPS Kongsberg Seatex AS

563_568_TM_2016.indd 564 07.08.2016 11:48:43

565


DATABRIDGE Kongsberg Maritime ASDATACHIEF Kongsberg Maritime ASDEITERMANN Saint-Gobain WeberDEWERS Meson ASDICKOW Alfsen og Gunderson ASDPS Kongsberg Seatex ASDREGGEN Palfinger Marine Norway ASDREGGEN CRANE Palfinger Marine Norway ASDST Alfsen og Gunderson ASDVZ Meson ASDYNAMAX EuroRope Marine ASECOMOTIVET Jets Vacuum ASEDUR Alfsen og Gunderson ASEIBEL Fremo ASEKORNES® Ekornes Contract ASELTEK ENERGI Anda-Olsen ASENDRES & HAUSER Parat Halvorsen A-SENWA AB Enwa Water Technology ASENWAMATIC Enwa Water Technology ASEUCARO Meson ASFELUWA PG Flow Solutions ASFINNØY Finnøy Gear & Propeller ASFLOWSERVE Parat Halvorsen A-SFONDITAL Fremo ASFREMO Fremo ASFTS Alfsen og Gunderson ASFUNKE Parat Halvorsen A-SGESTRA Parat Halvorsen A-SGOLAR Teamtec A/SGREEN TECH MARINE® Yara Marine ASGRUNDFOS Parat Halvorsen A-SGRUNDFOS Fremo ASGXU Finnøy Gear & Propeller ASHAMMELMANN PG Flow Solutions ASHANSEN PROTECTION Hansen Protection ASHARDING Harding Safety ASHARDTOP Jotun CoatingsHDM KONTRO PG Flow Solutions ASHONEYWELL Fremo ASHYDE GUARDIAN PG Flow Solutions ASHYDE MARINE PG Flow Solutions ASHYDRALIFT TTS Marine AS (Norway)JETST Jets Vacuum AS

563_568_TM_2016.indd 565 07.08.2016 11:48:43

566


JOTACOTE Jotun CoatingsJOTAMASTIC Jotun CoatingsJOTUN Jotun CoatingsKARAT EuroRope Marine ASKEB Centa Transmisjoner A.S.KENICS Alfsen og Gunderson ASKINETICO Alfsen og Gunderson ASKLINGER Parat Halvorsen A-SKRAL PG Flow Solutions ASKROHNE Parat Halvorsen A-SKSB Parat Halvorsen A-SKUBLER Parat Halvorsen A-SLEPTON CONTROL Meson ASLIBRA Anda-Olsen ASLIBRA DOORS Libra-Plast ASLIBRA MARINE DOORS Libra-Plast ASMARATHON Jotun CoatingsMASTO Masto Wire Service A/SMAXIT Saint-Gobain WeberMOBREY Parat Halvorsen A-SMODULFLEX Centa Transmisjoner A.S.MRU Kongsberg Seatex ASMRU Fremo ASMT FRESHWATER Enwa Water Technology ASMUNCK OFFSHORE Palfinger Marine Norway ASNORBRO Parat Halvorsen A-SNOREQ Harding Safety ASNORLIFT TTS Marine AS (Norway)NORSAFE Norsafe ASOBL Alfsen og Gunderson ASOCHSNER Parat Halvorsen A-SOILON Parat Halvorsen A-SOKV Meson ASOPTIMA Anda-Olsen ASOPTIMARIN Optimarin ASOSRAM Anda-Olsen ASPARAT Parat Halvorsen A-SPILOT Jotun CoatingsPLANY Plany ASPOWEC Anda-Olsen ASPRISM Air Products ASPROMINENT PG Flow Solutions AS

563_568_TM_2016.indd 566 07.08.2016 11:48:43

567


RADIUM Anda-Olsen ASRADIUS Kongsberg Seatex ASRAMSON Alfsen og Gunderson ASROTHO Alfsen og Gunderson ASRUHRPUMPEN PG Flow Solutions ASSAACKE Parat Halvorsen A-SSAINT-GOBAIN WEBER Saint-Gobain WeberSAMSON PG Flow Solutions ASSAMSON Parat Halvorsen A-SSANSYS Meson ASSAUTER Parat Halvorsen A-SSCANJET PG Flow Solutions ASSEABEAR Maritime Partner ASSEACONOMY Jotun CoatingsSEAFORCE Jotun CoatingsSEAMATE Jotun CoatingsSEAPATH Kongsberg Seatex ASSEAQUANTUM Jotun CoatingsSEEPEX PG Flow Solutions ASSEIBU GIKEN Alfsen og Gunderson AS

SERA Alfsen og Gunderson ASSHINKO PG Flow Solutions ASSIEMENS Fremo ASSIEMENS Siemens AS, Marine & ShipbuildingSOCOMEC Anda-Olsen ASSONDEX PG Flow Solutions ASSONNENSHEIN Anda-Olsen ASSPECK PG Flow Solutions ASSPERRE Parat Halvorsen A-SSPIRAX SARCO Parat Halvorsen A-SSPRINGER Maritime Partner ASSTADT STADT ASSTASCHO STADT ASSTEINEN Fremo ASSTREAMO Vestnes Ocean ASSTRESSLESS® Ekornes Contract ASSUNDYNE PG Flow Solutions ASSUNDYNE MARELLI Alfsen og Gunderson ASSUNTEC Fremo ASSVANE® Ekornes Contract ASTANKGUARD Jotun Coatings

563_568_TM_2016.indd 567 07.08.2016 11:48:43

568


TEAMTEC Teamtec A/STHOMAS Centa Transmisjoner A.S.TIGERHOLM Fremo ASTRANBERG Tranberg A.S.TRANSMOTOR Anda-Olsen ASUMB Meson ASUNIGAS Fremo ASUNI-SOLAR Anda-Olsen ASVACUUMARATORT Jets Vacuum ASVICTRON Anda-Olsen ASVIESSMANN Parat Halvorsen A-SVISA Alfsen og Gunderson ASVISADES Alfsen og Gunderson ASVISION Anda-Olsen ASWEEDO Maritime Partner ASWEISHAUPT Parat Halvorsen A-SWEPUKO PG Flow Solutions ASWILHELM SANDER Meson ASWILLY Vestnes Ocean ASWINTER PG Flow Solutions ASWME Water Mist Engineering ASWS Meson ASWT MESON Meson ASXYLEM PG Flow Solutions ASYAMADA Alfsen og Gunderson ASYARA Yara Marine ASYOKOGAWA Parat Halvorsen A-S

563_568_TM_2016.indd 568 07.08.2016 11:48:43

norwegian maritime equipment -...

Documents