nortek · hvac copper/metal theft prevention copper cop™ is an efficient, dependable and reliable...

NORTEKSECURITY & CONTROLLINEAR SECURITY – WIRELESS

Master Index

Karol

Stempel

HVAC Copper/Metal Theft Prevention

Copper Cop™ is an efficient, dependable and reliable security protection solution designed to combat theft of commercial air conditioning (HVAC) units. Copper Cop can be installed and activated in minutes by a security professional and, unlike other HVAC alarm products, does not require an HVAC, Plumber’s or Electrical Contractor’s License.

Thousands of commercial HVAC units are destroyed each year by thieves seeking to gain quick cash by stealing copper condenser lines and selling them at scrap yards. The cost of business disruption can be high, including replacement of the HVAC system, and inability to use the facility while the HVAC service is being restored. Additionally, repeated thefts increase a company’s insurance premiums, making copper theft one of the most vexing challenges businesses face today.

Linear, a leader in innovative and cost-effective security products and theft prevention systems, has developed Copper Cop for Security dealers and integrators whose customers want a quick, secure, and active deterrence solution.

The Solution Is HereLinear’s Copper Cop consists of a unique 30-foot cable harness with eight self-tapping screw-in clip assemblies, connected to a weatherproof alarm interconnect box. The system is ready to accept a wireless alarm transmitter or hard-wired connection to a security alarm panel. Once Copper Cop is installed on the exterior of the HVAC unit and activated, removal of the HVAC unit cover or tampering with the cable triggers an alarm.

Field-Proven, Simple and Effective Copper Theft Deterrence

Copper Cop tamper-resistant

alarm interconnect box

Copper Cop cable harness &

interconnect box

Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com P/N 234762A

For more information, please visit www.linearcorp.com.Specifications subject to change without notice.

Features

• Reliable, simple non-intrusive solution to guard against HVAC unit copper or metal theft• Does not require Electrician’s, Plumber’s or HVAC Contractor’s license • Does not trigger a false alarm even if fluctuations in refrigerant pressure or electrical power

outages occur**Connected alarm system must have backup battery power to operate properly during a power outage

• Ready to accept hard-wired alarm system connection or wireless alarm transmitter• Optional secondary 30-foot harness can be added to cover larger commercial HVAC units

(60’ length total)• Bright yellow cable harness acts as a visual deterrent to would-be thieves

Target Markets

• Schools • Places of Worship • Single-Story Retail Buildings • Cellular Network Facilities / Towers• Remote Communication Centers • Substation Outbuildings

Accessories

Model # Description

DXS-31 Wireless RF Alarm Sensor Transmitter

DXR-702 2-Channel Wireless RF Alarm Sensor Receiver

CC3008XT Secondary 30-foot Extension Harness (for larger HVAC units)

CC3008WK1 Copper Cop Kit with Wireless Transmitter and Receiver

HVAC Copper/Metal Theft Prevention

Copper Cop Wireless and Hard-Wired System

Your HVAC is an open invitation for copper thieves!

Stop thieves in their tracks with…

Field-Proven, Simple and Effective Copper Theft Deterrence

Linear Copper Cop theft deterrent products are distributed by:

www.linearcorp.com235721A

Copper Cop Cable Harness & Interconnect Box

Copper Cop is Ideal for:

• Schools

• Places of Worship

• Single-Story Retail Buildings

• Cellular Network Facilities / Towers

• Remote Communication Centers

• Substation Outbuildings

Thieves want the recyclable copper and other metal parts of your HVAC units and exterior machinery…Copper Cop safeguards your HVAC units from theft and destruction!

Metal theft has increased by 81% since 2008, with copper being stolen more than any other metal, according to the National Insurance Crime Bureau.

Field-Proven, Effective Theft Deterrence

• Installs quickly on HVAC unit exterior by any Securitycontractor – no need to pay an electrician or plumber

• Bright yellow cable harness acts as a visual deterrent

to would-be thieves

• Connects to your existing security system or nearlyany independent alarm/siren apparatus

• Does not trigger a false alarm, even if fluctuations inrefrigerant pressure or electrical power outages occur

• Accepts hard-wired alarm system connection or wireless alarm transmitter

Cut Your Risk

Don’t risk higher insurance premiums due to theft, or, the loss of potential goods, business and equipment by the lack of A/C while a new system is ordered and installed.

Copper Cop guards against:

• Employees being inconvenienced by business closure

• Loss of perishable items (food products, anything thatcannot stand excessive heat/cold)

• Damage to sensitive computer equipment or systemsdue to excessive heat

Learn More

• Watch the Copper Cop Video at: www.linearcorp.com/coppercop

• Download the Copper Cop datasheet at: www.linearcorp.com/pdf/literature/Copper-Cop-Lit.pdf

• Contact your local Security sales rep or, call Linear at:800.421.1587 for a referral in your area.

Copper Cop Tamper-Resistant Alarm Interconnect Box

Scan QR code for more information:

A Simple, Practical Line of

Smart Home Connected Products

... Your Connected World

PRINTER’S INSTRUCTIONS:GOCONTROL BROCHURE - NORTEK P/N: 235610F - INK: 4/4: 4-COLOR PROCESS - SADDLE STITCHED BOOK - PAPER STOCK: PLUS COVER: ENDURANCE VELVET 80 lb. COVER - INSIDE PAGES: ENDURANCE VELVET 100 lb. TEXT - SIZE: 8.500” X 11.000” - SCALE: 1-1 - 12 PAGES

With GoControl-branded Smart home solutions, you get fully-compatible, easy-to-use and affordable smart products that satisfy your family’s home control needs and desires.

GoControl Smart products are so easy to install—and they work with nearly everything else that talks Z-Wave®. Mix and match GoControl Smart products to create your own personal mix of smart control. Even add other brand smart products to rev-up your smart home IQ!

Smart Products for Everyday Life

Easy-to-Use Compatible Affordable

LBR30Z-1

Flood Light Bulb Smart Dimmable LED Indoor Flood LightBy simply removing an existing flood light bulb and screwing in this GoControl Smart LED dimmable indoor flood light bulb, you’ll get beautiful, warm 65-watt equivalent lighting for only 7.5 watts of energy use. Using your Z-Wave hub, you’ll also get ’scene’ control for setting the right mood, or making this light turn on or off when other Z-Wave devices are activated whether you’re at home or away!

LB65R6Z-1

In-Ceiling Smart LED Recessed Retrofit Lighting KitThe GoControl Smart LED Recessed Retrofit Light Kit is designed to replace a conventional 5" or 6" recessed downlight. The kit comes with a new white trim ring providing a fresh, clean look. It is simple to install and setup and provides a long, 20+ years of life (3 hrs. /day). The light provides instant-on, bright and fully-dimmable illumination, equal to 65-watt incandescent bulbs, but uses only 8.5 watts of energy—far superior than either incandescent or fluorescent light bulbs.

LB60Z-1

Bulbz Smart Dimmable LED Standard Light BulbThe GoControl model LB60Z-1 instant-on Smart LED screw-in light bulb is fully-dimmable, and provides pleasant soft-white illumination equivalent to a 60-watt incandescent bulb, yet uses only 9 watts of energy. You get great value and Z-Wave remote control convenience with an estimated 22+ year lifespan.

Control your home’s mood remotelyUsing your Z-Wave hub, connect and control your GoControl light bulbs and lighting fixtures from the switch or wirelessly from your app to get the mood for comfortable living just right.

SMART ELECTRICAL

SMART ELECTRICAL

WA00Z-1

Smart Battery-Powered Wall Switch• Great for controlling GoControl (or

other brand) Z-Wave lightbulbs installed in fixtures that use a wall switch

• Easily controls ON/OFF or dimming of lighting

• One switch can be programmed to control up to 5 Z-Wave dimmers, switches and other Z-Wave automation devices

• Can be mounted over any standard or decorator-style switch, or on just about any surface (Simple self-adhesive mounting pads included; can also screw-mount over switch if desired)

• No need to do any wiring at all!

WS15Z5-1

Smart Switch

Automatically turn on or off any device, saving time and energy. From turning on the coffee maker in the morning so your fresh brew is waiting to the ceiling fan when it gets too hot, the Smart Switch is perfect for small appliances or lights.• Supports multi-tap scene control for up

to 8 programmed Scenes• Replaceable Decorator trim ring design –

available in black, brown and almond

WT00Z5-1

Smart 3-Way Switch/Dimmer

Control any device, light or lights from anywhere you have power, with no new wiring needed. The Smart 3-Way Switch can control up to 5 dimmers and 5 on/off switches, with no extra wires. No more traveler wires, no more limits. • Supports multi-tap scene control for up

to 8 programmed Scenes• Creates multi-switch “3-way” circuits

without the need for a traveler wire• Replaceable Decorator trim ring design –

available in black, brown and almond

WO15EMZ5-1

Smart EM Wall Outlet

Every outlet can now be smart and efficient. The EM Wall Outlet has one controlled and one standard outlet allowing for simultaneous normal and Energy Monitored automated operation.• Energy Monitoring reports energy usage• Tamper resistant per National Electrical

Code (2008)

WD500Z5-1

Smart Dimmer SwitchCreate the ideal lighting environment with the Smart Dimmer Switch. With 100 step dimming this switch can set the ideal lighting scene from romantic low light to full brightness for emergency situations

• Supports multi-tap scene control for up to 8 programmed Scenes

• Replaceable Decorator trim ring design – available in black, brown and almond

Smart Lighting Control Made Easy

GoControl Smart home solutions help make busy lives easier, giving you the smart remote control you want most.

With GoControl, just about anything in your home that you want to control, automate and monitor is just a click away. We give you affordable and intelligent solutions to set the right mood and help protect the people and places you hold dear. GoControl Smart products really rev-up your smart home’s IQ!

Part Number DescriptionZ-Wave Range(line of sight)

Operating Temp. Power/Battery Color Security Compatible Repeats Signal

WAPIRZ-1 Passive Infrared Motion Detector - Up to 100' 5° - 140° F 3 VDC/CR123A White -

WADWAZ-1 Door-Window Sensor - Up to 100' 5° - 140° F 3 VDC/CR123A White -

WA105DBZ-1 Siren/Strobe Warning Device - Up to 100' 5° - 140° FAC Powered with 6 VDC/NiMH (permanent cell)

White w/red lens GB00Z-2 Glass Break Sensor - Up to 100' 32° to 120° F 3 VDC/CR123A (2) White -

WF00Z-1 Water Leak Sensor Up to 130' 32° to 120° F 3 VDC/CR123A White -



GD00Z-4Garage Door Opener Remote Controller Up to 130’ -4° to 122° F

Controller: 12 VDC from 120 VAC/60Hz power supply; Tilt Sensor: CR2032

Black

GC-TBZ48 Battery-powered Smart Thermostat - Up to 100' 32° to 120°F4 x ‘AA’; Can be powered by 24V HVAC “R” or “C” wire

Whitew/silver trim -

Part Number Description Brightness Light Appearance Energy Use Avg. Life Repeats Signal

LB60Z-1 Dimmable LED Standard Light Bulb (60-watt equivalent) 750 lumens 2700° K 9 watts 22.8 years (3 hrs./day) LBR30Z-1 Dimmable LED Flood Light Bulb (65-watt equivalent) 650 lumens 5000° K 7.5 watts 22.8 years (3 hrs./day) LB65R6Z-1 Retrofit Recessed LED Light Bulb Kit (65-watt equivalent) 650 lumens 2700° K 8.5 watts 22.8 years (3 hrs./day)

Part Number DescriptionIsolated Contacts/Resistive

Motor Incandescent Auto Sense Replaceable Trim Ring Repeats Signal

WD1000Z-1 In-Wall Dimmer Switch, 1000 W - n/a n/a1000W (installed lighting, no receptacles)

-

WD500Z5-1 In-Wall Dimmer Switch, 500 W n/a n/a500W (installed lighting, no receptacles)

-

WT00Z5-1 In-Wall Wireless “3-Way” switch None (does not control a load directly) - WS15Z5-1 In-Wall Switch 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - WO15EMZ5-1 In-Wall Receptacle Outlet 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - - PD300EMZ5-1 Smart EM Lamp Module n/a n/a 300W max, 120 VAC - PS15EMZ5-1 Smart EM Appliance Module 15 amps, 1800W max 15 amps, 1800W max 300W max, 120 VAC -

FS20Z-1 Fixture-Mounted Control Module -20 amps G.P. max, 277 VAC, 10 FLA, 60 LRA, 250 VAC

1 H.P. max, 120/240 VAC960 W max, 120 VAC, TV8 (Tungsten)

- -

WA00Z-1 Battery-powered Scene Controller None (does not control a load directly) - - -

GoControl Product Specification Chart

SMART ELECTRICAL

SMART SENSORS

SMART CONTROL



WAPIRZ-1 Passive Infrared Motion Detector - Up to 100' 5° - 140° F 3 VDC/CR123A White -

WADWAZ-1 Door-Window Sensor - Up to 100' 5° - 140° F 3 VDC/CR123A White -

WA105DBZ-1 Siren/Strobe Warning Device - Up to 100' 5° - 140° FAC Powered with 6 VDC/NiMH (permanent cell)

White w/red lens GB00Z-2 Glass Break Sensor - Up to 100' 32° to 120° F 3 VDC/CR123A (2) White -

WF00Z-1 Water Leak Sensor Up to 130' 32° to 120° F 3 VDC/CR123A White -



GD00Z-4Garage Door Opener Remote Controller Up to 130’ -4° to 122° F

Controller: 12 VDC from 120 VAC/60Hz power supply; Tilt Sensor: CR2032

Black

GC-TBZ48 Battery-powered Smart Thermostat - Up to 100' 32° to 120°F4 x ‘AA’; Can be powered by 24V HVAC “R” or “C” wire

Whitew/silver trim -

Part Number Description Brightness Light Appearance Energy Use Avg. Life Repeats Signal

LB60Z-1 Dimmable LED Standard Light Bulb (60-watt equivalent) 750 lumens 2700° K 9 watts 22.8 years (3 hrs./day) LBR30Z-1 Dimmable LED Flood Light Bulb (65-watt equivalent) 650 lumens 5000° K 7.5 watts 22.8 years (3 hrs./day) LB65R6Z-1 Retrofit Recessed LED Light Bulb Kit (65-watt equivalent) 650 lumens 2700° K 8.5 watts 22.8 years (3 hrs./day)

Part Number DescriptionIsolated Contacts/Resistive

Motor Incandescent Auto Sense Replaceable Trim Ring Repeats Signal

WD1000Z-1 In-Wall Dimmer Switch, 1000 W - n/a n/a1000W (installed lighting, no receptacles)

-

WD500Z5-1 In-Wall Dimmer Switch, 500 W n/a n/a500W (installed lighting, no receptacles)

-

WT00Z5-1 In-Wall Wireless “3-Way” switch None (does not control a load directly) - WS15Z5-1 In-Wall Switch 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - WO15EMZ5-1 In-Wall Receptacle Outlet 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - - PD300EMZ5-1 Smart EM Lamp Module n/a n/a 300W max, 120 VAC - PS15EMZ5-1 Smart EM Appliance Module 15 amps, 1800W max 15 amps, 1800W max 300W max, 120 VAC -

FS20Z-1 Fixture-Mounted Control Module -20 amps G.P. max, 277 VAC, 10 FLA, 60 LRA, 250 VAC

1 H.P. max, 120/240 VAC960 W max, 120 VAC, TV8 (Tungsten)

- -

WA00Z-1 Battery-powered Scene Controller None (does not control a load directly) - - -

SMART ELECTRICAL

PS15EMZ5-1

Smart EM Appliance Module

Remotely control devices with the EM Appliance Module. Plug in the tea kettle, light or small appliance and activate it on a schedule, from your phone or Smart Switch. And with Energy Monitoring capability, know how Green your appliances are performing. It will also light your path with an integrated LED night light.

• Energy Monitoring reports energy usage• Does not impede 2nd outlet• 15 Amp maximum capacity

FS20Z-1

Smart Fixture ModuleGoControl’s Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical box to operate loads or control relay-based devices. The relay can be isolated for dry contact applications or powered to switch live loads. This device can operate loads of up to 277v.

Possible Applications: Commercial Lighting, In-Ceiling Lighting/fans, Dry-Contact Relays, Pool Pumps, Water Heaters, Fireplaces.

PD300EMZ5-1

Smart EM Lamp Module

Quickly add dimmable control to a lamp with the EM Lamp Module. A simple plug-n-play device, lighting control has never been easier or Greener. It’s unique Energy Monitoring circuitry provides both a visual indication of the amount of energy being used, as well as reports it to the Z-Wave hub for reference. It will also light your path with an integrated LED night light.

• Energy Monitoring reports energy usage• Does not impede 2nd outlet

SMART SENSORS

WADWAZ-1

Smart Door/Window Sensor A two-piece sensor designed to be affixed to a door, window or other permanent fixture that opens and closes, such as a drawer, safe, or valuables storage cabinet. Once paired with a compatible Z-Wave hub, the sensor will report when the fixture has been opened or closed via wireless Z-Wave transmission.

Specifications• Maximum Sensor Gap: 0.75"• Supports External Contact: Yes• Long-life battery included• For non-life safety applications

WAPIRZ-1

Smart Motion DetectorOur Passive Infrared Motion Detector (PIR) is a wireless indoor security device that senses and reports motion activity and transmits alert signals via Z-Wave. The PIR conveniently delivers a low-battery alert signal when the battery needs replacement. The PIR also senses temperature changes and can trigger an alert based on specific changes to the room’s temperature.

Specifications• Motion Detection Range: 6' to 32'• Horizontal Coverage Angle:

120 Degrees• Temperature Change Alert: 2° F• Long-life battery included• For non-life safety applications

WA105DBZ-1

Smart Siren-Strobe AlarmOur combination Siren/Strobe Smart warning device alerts intruders of a security system presence. Once paired with a compatible Z-Wave hub, the sensor can be turned on or off remotely via the Z-Wave network. When on, the siren emits a very loud 105 dB alert tone and the integrated strobe flashes brightly.

The WA105DBZ-1 Siren/Strobe wall-mounts, and comes with a UL-approved AC plug-in power supply and offers an integrated battery backup, in case of AC power interruption.

Specifications• Siren Volume: 105 dB @ 1 Meter• Strobe Illumination: 4 white LED,

360 lumens• For non-life safety applications

Essential

Wireless Door-Window Sensors

Wireless Motion Detector

BOX INCLUDES:

• 2 QTY. DOOR-WINDOW SENSORS

• 1 MOTION DETECTOR

Home Security Suite

GC-DBC-1

Smart Doorbell Camera*

GB00Z-2

Smart Glass Break DetectorUsing your Z-Wave hub receive an alarm on your smart phone app if window breaking sounds are detected.

Features:• Always ready detection• Spatial detection of window shattering

sounds• Long-life battery included• Z-wave communications test button

With the GoControl Smart Doorbell Camera, you can see who is there, and answer your door on your smartphone app. Easy sale for professional installers.

WF00Z-1

Smart Water Leak SensorThe GoControl Smart Water Leak Sensor is great for multiple locations in your home— set one by your toilets, water heater, under sinks, and even near water-using appliances like washing machines and dishwashers.

Easy to install – battery powered: • Place sensor on the floor near potential

leak sources.• 10+ year battery life (battery included)• Great for second homes, while on

vacation, or when you’re away

SMART SENSORS

SMART CONTROL

• Fully weatherproof: Hermetically sealed, IP65 (Dust and water resistant)

• Wide-angle lens: 180 degrees, fisheye with fixed focal length, 6” to infinity

• Clearer audio: Two-way, built in speaker and microphone, active noise cancellation & echo reduction

GC-DBC-1 GoControl Doorbell Camera, WiFi Accessories:GC-DBC-C1 GoControl Wired Door Chime, WhiteGC-DBC-C2 GoControl WiFi Door Chime, WhiteGC-DBC-PS1 Plug-in Power Adapter, 120VAC, 16VAC OutputGC-DBC-PS2 Doorbell Transformer 16VAC, 30VAGC-DBC-FP GoControl Doorbell Camera Faceplate Kit: Bronze, Brass, White, CharcoalGC-DBC-T1 GoControl Doorbell Camera Test Tool

*Not supported directly by 2GIG Panel, uses stand-alone app.

SMART CONTROL

GC-TBZ48

Smart Battery-Powered Thermostat

GD00Z-4

Smart Garage Door ControllerOpens or closes garage door remotely through a Z-Wave hub/controller. Compatible with virtually any garage door opener/sectional door. Includes Tilt Sensor.

Specifications• Power: 120VAC, 50/60 Hz• Garage door position

sensor frequency: 345 MHz• Z-wave Frequency:

908.42 MHz

Features• Battery powered design

runs on 4 “AA” batteries• Extremely long 2 year

battery life• Can be powered by 24 VAC

“C” wire from HVAC system• Z-Wave compatible -

Ver. 4.5.5• Supports Z-Wave FLiRS

functionality

• Works on standard HVAC systems: 2 stage heat/ 2 stage cool

• Works on heat pump HVAC systems: 3 stage heat/ 2 stage cool

• Incredibly easy to install and program

• USB firmware upgrade ability• Wall mount or mounts on

single-gang junction box

Z-Wave Specifications• Range: Up to 130 feet

between the wireless controller and/or the closest Z-Wave receiver module

• Network wide inclusion• Security compatible• Scene: Command Class

Certifications• FCC, UL

Your family’s comfort, safety & security are all right at hand with GoControl.

Our sensors and control equipment help to protect and preserve the lifestyle you want to live, whether you’re relaxing at home, or away for a while. Live life richly and effortlessly with GoControl!

Copyright © 2017 Nortek Security & Control LLC. All rights reserved. GoControl is a registered trademark of Nortek Security & Control LLC. All other products or name brands are trademarks of their respective holders. Specifications and product availability subject to change without notice.

Nortek Security & Control

1950 Camino Vida Roble, Suite 150

Carlsbad, CA 92008

800.421.1587

nortekcontrol.com

235610F

Linear | NAPCO® Compatible Wireless Sensors

Compatible with all NAPCO® Receivers

Pet Immune Wireless PIR

Door / Window Wireless Sensor

• Vanishing Design• 5 Yr Lithium Battery• 7/8” Activation Gap

More Detailed Specs on Reverse Side

Glass BreakWireless Sensor

Recessed Door Sensor

• Compact Design• Rare Earth Magnet• 1.25” Activation Gap

WirelessPanic Remote

• Single Recessed Button• Neck/Wrist/Belt/Wall Clip Option• Breakaway Neck Lanyard

Wireless Key FOB

• Belt/Wall Clip Option• Resist Accidental Button Press• Tactile Button Feel

NAPPIRO1

NAPMDWO1

NAPGBO1

NAPRDWO1

NAPFOBO1

NAPPANO1

• Selectable 33/55Lb Pet Immunity• 30’ x 50’ Detection Area• Corner / Wall Mount Bracket

• 2-Stage Detector Circuit• 12ft/360 Degree Coverage• Built-in Glass Break and RF Test

Linear | NAPCO® Compatible Wireless Sensors

Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com | 235140X5

Compatible with all NAPCO® Receivers

NAPFOB01 Wireless Key FOB

Battery Life: 3 years Battery: (2) CR2025 LithiumTX Range: Up to 300 feetSize: 2.5 x 1.2 x 0.375 in (H x W x D)Accessories: Visor Clip, Belt clipOrder No: NAPFOB01

NAPGB01 Glass Break Wireless Sensor

Battery Life: 3 years Battery: 2 x CR123ADetection Range: 12ftTX Range: Up to 500 feetSize: 4.625 x 1.875 in (D x H)Accessories: ScrewsOrder No: NAPGB01

NAPMDW01 Door / WindowWireless Sensor

Battery Life: 5 years Battery: CR2032Range: Up to 500 feetSize: 1.5 x 1.0 x .375 (H x W x D)7/8” Wide GapAccessories: Double Sided Tape, ScrewsOrder No: NAPMDW01

NAPRDW01 RecessedDoor Sensor

Battery Life: 5 yearsBattery: CR2Range: Up to 500 feetSize: 0.75 x 2.5 in (D x H)1.25” Wide GapAccessories: Mounting Screws, Screw Secured CoverOrder No: NAPRDW01

NAPPIR01 Pet Immune Wireless PIR

Battery Life: 5 years Battery: CR123A33Lb or 55Lb Pet Immune DetectionDetection Area: 30 ft x 50 ftTX Range: Up to 500 feetSize: 3.5 x 2.3 x 1.9 in (H x W x D)Accessories: Screws, Corner and Wall Mount BracketsOrder No: NAPPIR01

NAPPAN01 Wireless Panic Remote

Battery Life: 3-5 years Battery: CR2032Range: Up to 300 feetSize: 2.5 x 1.2 x .375 (H x W x D)Accessories: Breakaway Lanyard, Belt Clip, Wrist BandOrder No: NAPPAN01

NAPCO is a trademark of Napco Security Technologies, Inc

Linear | Interlogix® Compatible Wireless Sensors

Compatible with all Interlogix Receivers

Pet Immune Wireless PIR



Recessed Door Sensor

• Selectable 33/55Lb Pet Immunity

• 30’ x 50’ Detection Area• Corner/Wall Mount Bracket

Works with all Wireless Interlogix Alarm Panels

- Simon

- NX Series

- Concord Series

More Detailed Specs on Reverse Side

Glass BreakWireless Sensor

• 2 Stage Detector Circuit• 12ft/360 Degree Coverage• Built-in Glass Break and

RF Test

Wireless Key FOB

• Belt/Wall Clip Option• Resist Accidental

Button Press• Tactile Button Feel

ITIRDW01

ITIDWA01 Compatibility

ITIMDW01 ITIPIR01ITIFOB01

ITIGLB01

• Compact Design• Rare Earth Magnet• 1.25” Activation Gap

• Vanishing Design• 5 Yr Lithium Battery• 7/8” Activation Gap

• Slim Design• Aux Input• 7/8” Activation Gap

Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com | P/N

Linear | Interlogix Compatible Wireless Sensors

Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com | 235141X5

Compatible with all Interlogix Receivers

ITIFOB01 Wireless Key FOB

Battery Life: 3 years Battery: (2) CR2025 LithiumTX Range: Up to 300 feetSize: 2.5 x 1.2 x 0.375 in (H x W x D)Accessories: Visor Clip, Belt clipOrder No: ITIFOB01

ITIGLB01 Glass Break Wireless Sensor

Battery Life: 3 years Battery: 2 x CR123ADetection Range: 12ftTX Range: Up to 500 feetSize: 4.625 x 1.875 in (D x H)Accessories: ScrewsOrder No: ITIGLB01

ITIMDW01 Door/WindowWireless Sensor

Battery Life: 5 years Battery: CR2032Range: Up to 500 feetSize: 1.5 x 1.0 x .375 (H x W x D)7/8” Wide GapAccessories: Double Sided Tape, ScrewsOrder No: ITIMDW01

ITIDWA01 Door / WindowWireless Sensor

Battery Life: 5 years Battery: 2 x CR2032TX Range: Up to 500 feetAccessories: ScrewsOrder No: ITIDWA01

ITIRDW01 RecessedDoor Sensor

Battery Life: 5 yearsBattery: CR2Range: Up to 500 feetSize: 0.75 x 2.5 in (D x H)1.25” Wide GapAccessories: Mounting Screws, Screw Secured CoverOrder No: ITIRDW01

ITIPIR01 Pet Immune Wireless PIR

Battery Life: 5 years Battery: CR123A33Lb or 55Lb Pet Immune DetectionDetection Area: 30 ft x 50 ftTX Range: Up to 500 feetSize: 3.5 x 2.3 x 1.9 in (H x W x D)Accessories: Screws, Corner and Wall Mount BracketsOrder No: ITIPIR01

Common Specifications

Frequency: 319.5MhzOperating Temperature: -5° to 55° COperating Relative Humidity: 5 to 90%, non-condensing

Interlogix is a trademark of Interlogix,Inc., a United Technologies Corporation.

Dual diversity superheterodyne technology.

Up to 1,500 foot line-of-sight range.

4 and 8-channel models for North American andEuropean markets.

Compatibility with nearly 40 different Linear DX and DXS series transmitters.

DXSR 1500 SERIES SUPERVISED RECEIVERSThe ultimate receivers

for adding wireless security.

®

There are a lot of reasons to add wireless

functions to a hardwire security panel.With

Linear’s DXSR 1500 series receivers, there are

also plenty of incentives. Security installers

can offer many valuable enhancements to the

alarm systems of present customers.And they

can attract more new business by offering a

state-of-the-art hybrid product.

What makes

DXSR 1500

series

receivers so

advantageous

is dual

diversity

superhetero-

dyne technolo-

gy that makes

possible

a measured

line-of-sight

range of up

to 1,500 feet.

Detached

garages, poolhouses, and other outbuildings that

were previously hard or impossible to protect

are now easily tied in using Linear’s wireless

sensors. Remote controls and panic button

functions can be added via Linear personal

transmitters in any style. Collectively, our DX

and DXS series represents industry’s most

extensive line — there are 39 models to choose

from, including pendants, keyrings, handhelds,

wristbands, door/windows, PIRs, smokes, glass

breaks, and bill traps.With our 8-channel DXSR

1508 receivers, up to 32 transmitters can be

distributed between channels.

Configuring new wireless security loops is

simple, thanks to quick-learn programming, a

7-segment channel display, and the per-channel

flexibility of selectable supervision and custom

output options.The channel display lights a

flashing center dash in Power On and Standby

conditions, a channel ID during an Alarm condi-

tion, and a decimal point to signal RF activity.

Additional outputs include per-channel Alarm,

common Low Battery, and common Status, with

LED indicators

for each.The

DXSR 1500

series even

comes in a

choice of

capacities and

frequencies:

4-channel or

8-channel

models for the

United States

(315 MHz)

or Europe

(433.92 MHz).

Creating wireless/hardwirehybrids is easy (and rewarding)

with DXSR 1500 seriesreceivers.

Non-Supervised Portable Transmitters, 315 MHz

PRODUCTMODEL NUMBER DESCRIPTION

DXT-21 SNT00376 2-Button, 1-Channel HandheldDXT-23 SNT00377 3-Button, 4-Channel HandheldDXT-25 SNT00378 5-Button, 8-Channel HandheldDXT-41 SNT00381 1-Button, 1-Channel Mini/KeyringDXT-42 SNT00382 2-Button, 3-Channel Mini/KeyringDXT-61A SNT00380A 1-Button, 1-Channel Pendant

Non-Supervised Stationary Transmitters, 315 MHz


DXT-31 SBT00014 Door/Window TransmitterDXT-54 SBT00013 Passive Infrared Motion DetectorDXT-72 SNA00356 Photoelectric Smoke DetectorDXT-72/K SNA00364 Photoelectric Smoke Detector

(for Canada)DXT-81 SNT00383 Bill TrapDXT-91 SNA00363 Glass Break

Supervised Portable Transmitters,433.92 MHz (EC Versions)


DXS-62/EC SST00092 Supervised 1-Button, 1-Channel Waterproof

DXS-63/EC SST00093 Supervised 2-Button, 3-Channel Waterproof

Supervised Stationary Transmitters,433.92 MHz (EC Versions)


DXS-31/EC SST00085 Supervised Door/Window Transmitter

DXS-54/EC SST00086 Supervised Passive Infrared Motion Detector

DXS-72/EC SST00087 Supervised Photoelectric Smoke Detector

DXS-91/EC SSA00017 Supervised Glass Break

Non-Supervised Portable Transmitters,433.92 MHz (EC Versions)


DXT-21/EC SNT00389 2-Button, 1-Channel HandheldDXT-23/EC SNT00388 3-Button, 4-Channel HandheldDXT-41/EC SNT00365 1-Button, 1-Channel Mini/KeyringDXT-42 SNT00366 2-Button, 3-Channel Mini/KeyringDXT-61/EC SNT00391 1-Button, 1-Channel Pendant


DXSR-1504 SSR00070 4-Channel, 315 MHz, Supervised Receiver (for United States and Canada)

DXSR-1504/EC SSR00072 4-Channel, 433.92 MHz, SupervisedReceiver(for Europe)

DXSR-1508 SSR00071 8-Channel, 315 MHz, Supervised Receiver (for United States and Canada)

DXSR-1508/EC SSR00073 8-Channel, 433.92 MHz, Supervised

Receiver(for Europe)

Available Models

Compatible Transmitters

Supervised Portable Transmitters, 315 MHz


DXS-21 SST00094 Supervised 2-Button, 1-Channel Handheld



DXS-62 SST00090 Supervised 1-Button, 1-Channel Waterproof

DXS-63 SST00091 Supervised 2-Button, 3-Channel Waterproof

Supervised Stationary Transmitters, 315 MHz


DXS-31 SST00073 Supervised Door/Window Transmitter

DXS-54 SST00074 Supervised Passive Infrared Motion Detector

DXS-72 SST00076 Supervised Photoelectric Smoke Detector

DXS-72/K SST00077 Supervised Photoelectric Smoke Detector (for Canada)

DXS-81 SST00078 Supervised Bill Trap

DXS-91 SSA00015 Supervised Glass Break

Specifications

Number of Channels:DXSR-1504; DXSR-1504/EC: 4 channels, supervisedDXSR-1508; DXSR-1508/EC: 8 channels, supervised

Receiver Type: diversity, dual superheterodyne

Carrier Frequency:North American: 315 MHzEuropean: 433.92 MHz

Bandwidth: 200 KHz typical

Receiver Sensitivity: -102 dBm typical at each antenna

Data Formats: Linear DX

Modulation: type A1D, PPM (pulse position modulation)

Measured Range: 1,500 feet, typical, with most standard LinearDXT or DXS stationary transmitters

Transmitter Capacity: 32 total with any distribution betweenchannels (note: learning multiple transmitters into any channelwill defeat device supervision)

Receiver Outputs:DXSR-1504; DXSR-1504/EC: 4 channel Alarm outputs,1 common Low Battery output, and 1 common Status outputDXSR-1508; DXSR-1508/EC: 8 channel Alarm outputs, 1common Low Battery output and 1 common Status output

Output Type:Mode: factory set to normally open; can be globally selectedas normally closed by internal jumperCurrent Rating: 100 mA maximum per output point

Channel Output Options: 3 output options, field selectableby channelMomentary: 3/4-second momentary closure on alarmToggle: alternate alarm action; toggle on, toggle offLatch: requires manual reset at the receiver or operates as a follower with door/window transmitters; latches “on”with open (Alarm) condition; latches “off” with closed(Restore) condition

Display Output:Channel Display: 7-segment LED indicator; displays flashingcenter dash in Power On and Standby; displays channel IDduring Alarm condition, along with Alarm condition LED;automatically clears when Alarm output restores; displays “P”,channel ID, and number of learned transmitters in each channel during programming modeRF Activity: indicated by decimal point on 7-segment display; indicates radio receiver activity; flashes with received dataAlarm Condition: 3 LED indicators — Alarm, Low Battery,and Status

Operating Voltage: 10.2 to 14.4 Vdc or 12 to 16 Vac

Operating Current:Standby: 30 mAAlarm: up to 120 mA

Operating Temperature: 0 to 60°C (32 to 120°F)

2055 Corte Del Nogal, Carlsbad, CA 92009 (760) 438-7000 (800) 421-1587 Fax (800) 468-1340

www.linearcorp.com

Copyright 1999, Linear Corporation 98-226 P/N 216512A Printed in U.S.A.

Dimensions: 7.25 in W x 5.00 in H x 1.00 in D (185.00 x127.00 x 25.40 mm)

Space Required for Installation: 7.50 in W x 14.0 in H

Antennae: 2 - 9.50 in wire whip antennas (supplied)

Mounting Hardware: 4 - #6 1.25 in wood screws (supplied)

Receiver Operating Parameters:Status Supervision: monitored on each channel for hourlystatus transmissions; reports status exception if no transmis-sions received within last 8-hour time period; 1 commonStatus output provided for all channels; 7-segment displayindicates channel where violation occurred; exception set and cleared by channelEnable Options: Status supervision can be enabled on perchannel basis by cutting appropriate jumper per channel;factory default is disabled (note: with Status supervision monitoring, more than one transmitter should not be learnedper channel)Low Battery Supervision: monitors each transmitter forLow Battery alarm; reports if any learned transmitter LowBattery signal is received; one common Low Battery alarmoutput provided for all transmitters; 7-segment display indicates channel where Low Battery occurred; Low Batteryset and cleared by individual transmitters; transmitter that has sent Low Battery report must send Good Battery signal to clear Low Battery conditionProgram Mode: enabled by program jumper; remote toenter program modeTransmitter Learn: momentary press and release desiredChannel Learn button (activate transmitter within 5 secondsto learn it into desired channel)Memory Interrogation: hold appropriate channel’s Learnbutton for less than 5 seconds; 7-segment display will indicatenumber of devices learned into the selected channelMemory Erase: hold appropriate channel’s Learn button formore than 10 seconds and then release; transmitters learnedinto that channel will be erased from receiver memory

Specifications subject to change without notice.

TYPICAL 4-ZONECONTROL PANEL

CONNECTION

DXS-80

The DXS-80 is a UL listed†, single station, carbon monoxide alarm with a built-in supervised transmitter. It is compatible with Linear’s wireless DXS Format Security Systems, Personal Emergency Reporting Systems (PERS), and other stand-alone receivers. The DXS-80 provides a warning to alert against both the acute and chronic effects of carbon monoxide (CO) poisoning.

When carbon monoxide is detected, the alarm sounds a loud local alarm. The built-in transmitter sends a digitally coded wireless signal to its companion receiver every 20 seconds until the air has cleared and the detector is restored.

The local alarm can be silenced once by pressing the test/reset button. The transmitter will continue to send an alarm signal every 20 seconds. After 7 minutes, the alarm will sound again if there is still an unsafe carbon monoxide concentration level. The reset function can be used only once for each alarm occurrence.

No field coding is required because the DXS-80 is factory set to a unique code; one of over a million possible codes.

The DXS-80 is powered by one 3-volt lithium battery. The battery is supplied and can power the unit for up to the six year life of the detector. If the battery voltage drops below a preset level the alarm will sound a low battery chirp every 45 seconds and a low battery signal will be sent to the receiver.

At about 6 years, the carbon monoxide detector element will reach the end of its serviceable life. The self-supervising detector will signal a permanent trouble condition, indicating time for replacement.

SPECIFICATIONS

REGULATORY LISTINGS: UL2034

DETECTION METHODS: Electrochemical

TIME TO ALARM PER UL 2034:

Carbon Monoxide Concentration Level

Minimum Time to Alarm

Maximum Time to Alarm

50 ppm +/-5 ppm 30 days Indefinite

70 ppm +/-5 ppm 60 min 240 min



AUDIBLE OUTPUT: 85 dBA/10'

OPERATING TEMP. RANGE: 32º-100º F

POWER: 3-Volt battery (Lithium Type 123A) (UL tested for greater than 1 year service life)

CURRENT: 7 mA alarm average, 15 µA standby

FREQUENCY: 315 MHz

NUMBER OF CODES: One of 1,048,576 possible codes

DIMENSIONS: 5.3" diameter, 2.0"h

COMPATIBLE RECEIVERS†: PERS-3600 PERS-2400A DXSR-1504 DXSR-1508 DVS-1200 DXR-702 DUAL-824 DVS-2400

Model DXS-80(SST00116)

Carbon Monoxide Alarm

Wireless Carbon Monoxide Alarm

,

,

A

Model DXR-702(SNR00149)

2-Channel Receiver

Also available as a kit:DX-COKIT(SSA00020)

Kit contains one DXR-702 receiver with a DXS-80 already learned into

the receiverNOTE: The DX-COKIT is not for use

in UL Listed applications† The DXS-80 is currently UL Listed for use with the Linear PERS Consoles only. It has not been tested by UL with other compatible Linear receivers.

DXS-80

DXR-702

Security Alarm Panel

DX-COKIT

The DX-COKIT is an excellent way to add CO protection to new or existing security alarm panels

Security Alarm Panel Requirement:Available input(s) which can accept a dry N.C. or N.O. contact

DX-COKIT

• Includes one DXS-80 CO Detector and one Linear DXR-702 Receiver, with the DXS-80 already learned into the receiver

• Interconnects to any Security Alarm Panel that can accept a dry N.C. or N.O. contact for a zone input

• Perfect for installations that require one CO detector

For applications requiring more than one CO detector, Linear recommends and offers the following product solutions:

NOTE: When multiple CO detectors are required for an application, Linear recommends that each CO detector be assigned to its own receiver channel to assure proper device supervision and reporting.

Number ofCO Detectors

Linear Receiver

Notes

1 DXR-702 Use the Linear DX-COKIT

1 to 4 DXSR-1504 Purchase the required number of DXS-80 Detectors

1 to 8 DXSR-1508 Purchase the required number of DXS-80 Detectors

Copyright © 2008 Linear LLC Printed in China 228209 AX2

USA & Canada (800) 421-1587 & (800) 392-0123(760) 438-7000 - Toll Free FAX (800) 468-1340

www.linearcorp.com

NOTE: The DX-COKIT is not for use in UL Listed applications

nortek · hvac copper/metal theft prevention copper cop™ is an efficient, dependable and reliable...

Documents