normal, bending and transverse shear stress and strains_kuli
DESCRIPTION
hfyfhjTRANSCRIPT
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
What isNormal, Bending, and Transverse
Shear Stresses and Strains
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Centroid of Area
Centroid of Area
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Area Moment of Inertia
Area with coordinates used in describing area moment of inertia.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Centroid, Area Moment of Inertia and Area
Centroid, area moment of inertia, and area for seven cross sections.
text reference: Table 4.1, page 146
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Mass and Mass Moment of Inertia
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Mass and Mass Moment of Inertia (cont.)
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Circular Bar with Tensile Load
Circular bar with tensile load applied.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Twisting due to Applied Torque
Twisting of member due to applied torque.
text reference: Figure 4.11, page 152
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Bending of a Bar
Bar made of elastomeric material to illustrate effect of bending. (a) Undeformed bar; (b) deformed bar.
text reference: Figure 4.12, page 156
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Bending in Cantilevered Bar
Bending occurring in cantilevered bar, showing neutral surface.
text reference: Figure 4.13, page 157
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Bending Stress Distribution
Profile view of bending stress variation.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Curved Member in Bending
Curved member in bending. (a) Circumferential view; (b) cross-sectional view.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Cross Section of Curved Member
Rectangular cross section of curved member.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Development of Transverse Shear
How transverse shear is developed.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Deformation due to Transverse Shear
Cantilevered bar made of highly deformable material and marked with horizontal and vertical grid lines to show deformation due to transverse shear. (a) Undeformed; (b) deformed.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Moments and Stresses on Elements
Three-dimensional and profile views of moments and stresses associated with shaded top segment of element that has been sectioned at y’ about neutral axis. (a) Three-dimensional view; (b) profile view.
Hendri DS BudionoCopy from Fundamentals of Machine Elements by Bernard J. Hamrock©2004 p2M DTM FTUI
Maximum Shear Stress
Maximum shear stress for different beam cross sections.