norgren filters, regulators and lubricators norgren...f74g-4an-qd3 f74g-6an-ap3 f74g-6an-ad3...
TRANSCRIPT
NorgrenFilters, Regulators and Lubricators
2 Customer Service: 877.963.4966
Dixon - Norgren Cross ReferenceCross-Reference
RegulatorsDixon
R07-100RR07-100RGR07-200RR07-200RGR11-013RGR11-037RGR11-061RGR17-600RR17-600RGR17-800RR17-800RGR17-A00RR17-A00RGR17-B00RR17-B00RGR18-C05RR18-C05RGR22-405RR43-201RGR43-301RGR43-406RGR72G-2RR72G-2RGR72G-3RR72G-3RGR72M-2RGR72M-3RGR72M-2RR72M-3RR73G-2RR73G-2RGR73G-3RR73G-3RGR73G-4RR73G-4RGR74G-3RR74G-3RGR74G-4RR74G-4RGR74G-6RR74G-6RGR83-200RR91-221RG
R07-100-RNKAR07-100-RGKAR07-200-RNKAR07-200-RGKA11-002-01311-002-03711-002-061R17-600-RNLAR17-600-RGLAR17-800-RNLAR17-800-RGLAR17-A00-RNLAR17-A00-RGLAR17-B00-RNLAR17-B00-RGLAR18-C05-RNLAR18-C05-RGLAR22-405-RNMAR43-201-NGLAR43-301-NGLAR43-406-NGLAR72G-2AK-RMNR72G-2AK-RMGR72G-3AK-RMNR72G-3AK-RMGR72M-2AK-RMGR72M-3AK-RMGR72M-2AK-RMNR72M-3AK-RMNR73G-2AK-RMNR73G-2AK-RMGR73G-3AK-RMNR73G-3AK-RMGR73G-4AK-RMNR73G-4AK-RMGR74G-3AK-RMNR74G-3AK-RMGR74G-4AK-RMNR74G-4AK-RMGR74G-6AK-RMNR74G-6AK-RMGR83-200-RNLAR91W-2AK-NGLN
NorgrenDixon Norgren
F07-100-A1TAF07-100-M1TAF07-200-A1TAF07-200-M1TAF17-600-A3DAF17-600-M3DAF17-800-A3DAF17-800-M3DAF17-A00-A3DAF17-A00-M3DAF17-B00-A3DAF17-B00-M3DAF18-C00-A3DAF18-C00-M3DAF22-405-A2DAF72G2ANST3F72G2ANSD3F72G2ANQT3F72G2ANQD3F72G3ANST3F72G3ANSD3F72G3ANQT3F72G3ANQD3F73G2ANAT3F73G2ANAD3F73G2ANQT3F73G2ANQD3F73G3ANAT3F73G3ANAD3F73G3ANQT3F73G3ANQD3F73G4ANAT3F73G4ANAD3F73G4ANQT3F73G4ANQD3F74C-3AD-AD0F74C-4AD-AD0F74G-3AN-AP3F74G-3AN-AD3F74G-3AN-QP3F74G-3AN-QD3F74G-4AN-AP3F74G-4AN-AD3F74G-4AN-QP3F74G-4AN-QD3F74G-6AN-AP3F74G-6AN-AD3F74G-6AN-QP3F74G-6AN-QD3F74H-4AD-AD0F74H-6AD-AD0F74V-3AN-EMAF74V-4AN-EMAF74V-6AN-EMA
Filters
F07-100AF07-100MF07-200AF07-200MF17-600AF17-600MF17-800AF17-800MF17-A00AF17-A00MF17-B00AF17-B00MF18-C00AF18-C00MF22-405A-MBF72G-2AF72G-2A-MBF72G-2MF72G-2M-MBF72G-3AF72G-3A-MBF72G-3MF72G-3M-MBF73G-2AF73G-2A-MBF73G-2MF73G-2M-MBF73G-3AF73G-3A-MBF73G-3MF73G-3M-MBF73G-4AF73G-4A-MBF73G-4MF73G-4M-MBF74C-3A-MBF74C-4A-MBF74G-3AF74G-3A-MBF74G-3MF74G-3M-MBF74G-4AF74G-4A-MBF74G-4MF74G-4M-MBF74G-6AF74G-6A-MBF74G-6MF74G-6M-MBF74H-4A-MBF74H-6A-MBF74V-3A-MBF74V-4A-MBF74V-6A-MB
B07-102AGB07-102MGB07-202AGB07-202MGB12-218AGB12-218MGB72G-2AGB72G-2AG-MBB72G-2MGB72G-2MG-MBB72G-3AGB72G-3AG-MBB72G-3MGB72G-3MG-MBB73G-2AGB73G-2AG-MBB73G-2MGB73G-2MG-MBB73G-3AGB73G-3AG-MBB73G-3MGB73G-3MG-MBB73G-4AGB73G-4AG-MBB73G-4MGB73G-4MG-MBB74G-3AGB74G-3AG-MBB74G-3MGB74G-3MG-MBB74G-4AGB74G-4AG-MBB74G-4MGB74G-4MG-MBB74G-6AGB74G-6AG-MBB74G-6MGB74G-6MG-MB
Dixon Norgren
B07-102-A1KAB07-102-M1KAB07-202-A1KAB07-202-M1KAB12-218-A3LAB12-218-M3LAB72G-2AK-ST3-RMGB72G-2AK-SD3-RMGB72G-2AK-QT3-RMGB72G-2AK-QD3-RMGB72G-3AK-ST3-RMGB72G-3AK-SD3-RMGB72G-3AK-QT3-RMGB72G-3AK-QD3-RMGB73G-2AK-AT3-RMGB73G-2AK-AD3-RMGB73G-2AK-QT3-RMGB73G-2AK-QD3-RMGB73G-3AK-AT3-RMGB73G-3AK-AD3-RMGB73G-3AK-QT3-RMGB73G-3AK-QD3-RMGB73G-4AK-AT3-RMGB73G-4AK-AD3-RMGB73G-4AK-QT3-RMGB73G-4AK-QD3-RMGB74G-3AK-AP3-RMGB74G-3AK-AD3-RMGB74G-3AK-QP3-RMGB74G-3AK-QD3-RMGB74G-4AK-AP3-RMGB74G-4AK-AD3-RMGB74G-4AK-QP3-RMGB74G-4AK-QD3-RMGB74G-6AK-AP3-RMGB74G-6AK-AD3-RMGB74G-6AK-QP3-RMGB74G-6AK-QD3-RMG
Filter / Regulators
SCFM ratings are at 100 PSI inlet pressureLine art measurements given in inches (mm).
3Customer Service: 877.963.4966
L07-100AL07-200AL17-600AL17-800AL17-A00AL17-B00AL17-600APXL17-800APXL17-A00APXL17-B00APXL72M-2L72M-2MBL72M-3L72M-3MBL72M-2MBPXL72M-3MBPXL73M-2L73M-2MBL73M-3L73M-3MBL73M-4L73M-4MBL73M-2MBPXL73M-3MBPXL73M-4MBPXL74M-3L74M-3MBL74M-4L74M-4MBL74M-6L74M-6MBL74M-3MBPXL74M-4MBPXL74M-6MBPX
L07-100-MPAAL07-200-MPAAL17-600-MPDAL17-800-MPDAL17-A00-MPDAL17-B00-MPDAL17-600MP-DA8NL17-800MP-A8NL17-A00-MPDA8NL17-B00-MPDA8NL72M2AP-QTNL72M2AP-QDNL72M3AP-QTNL72M3AP-QDNL72M-2AP-DRPL72M-3AP-DRPL73M2APQTNL73M2APQDNL73M3APQTNL73M3APQDNL73M4APQTNL73M4APQDNL73M-2AP-DRPL73M-3AP-DRPL73M-4AP-DRPL74M-3AP-QPNL74M-3AP-QDNL74M-4AP-QPNL74M-4AP-QDNL74M-6AP-QPNL74M-6AP-QDNL74M-3AP-DRPL74M-4AP-DRPL74M-6AP-DRP
Lubricators - Micro-FogDixon Norgren
Lubricators - Oil-Fog
L17-600-OPDAL17-800-OPDAL17-A00-OPDAL17-B00-OPDAL22-405-OPDAL72C-2AP-QTNL72C-2AP-QDNL72C-3AP-QTNL72C-3AP-QDNL73C-2AP-QTNL73C-2AP-QDNL73C-3AP-QTNL73C-3AP-QDNL73C-4AP-QTNL73C-4AP-QDNL74C-3AP-QPNL74C-3AP-QDNL74C-4AP-QPNL74C-4AP-QDNL74C-6AP-QPNL74C-6AP-QDN
L17-600DL17-800DL17-A00DL17-B00DL22-405MBL72C-2L72C-2MBL72C-3L72C-3MBL73C-2L73C-2MBL73C-3L73C-3MBL73C-4L73C-4MBL74C-3L74C-3MBL74C-4L74C-4MBL74C-6L74C-6MB
Dixon Norgren
Combination Units
E72-2AE72-2A-MBE72-2ME72-2M-MBE72-3AE72-3A-MBE72-3ME72-3M-MBE73-2AE73-2A-MBE73-2ME73-2M-MBE73-3AE73-3A-MBE73-3ME73-3M-MBE73-4AE73-4A-MBE73-4ME73-4M-MBE74-3AE74-3A-MBE74-3ME74-3M-MBE74-4AE74-4A-MBE74-4ME74-4M-MBE74-6AE74-6A-MBE74-6ME74-6M-MBP1A-100AP1A-100MP1A-200AP1A-200MP8A-660AP8A-660MP8A-860AP8A-860MPTH-100AGPTH-200AG
C72A-2AK-ST3-RMG-QTBC72A-2AK-SD3-RMG-QDBC72A-2AK-QT3-RMG-QTBC72A-2AK-QD3-RMG-QDBC72A-3AK-ST3-RMG-QTBC72A-3AK-SD3-RMG-QDBC72A-3AK-QT3-RMG-QTBC72A-3AK-QD3-RMG-QDBC73A-2AK-AT3-RMG-QTBC73A-2AK-AD3-RMG-QDBC73A-2AK-QT3-RMG-QTBC73A-2AK-QD3-RMG-QDBC73A-3AK-AT3-RMG-QTBC73A-3AK-AD3-RMG-QDBC73A-3AK-QT3-RMG-QTBC73A-3AK-QD3-RMG-QDBC73A-4AK-AT3-RMG-QTBC73A-4AK-AD3-RMG-QDBC73A-4AK-QT3-RMG-QTBC73A-4AK-QD3-RMG-QDBC74A-3AK-AT3-RMG-QPBC74A-3AK-AD3-RMG-QDBC74A-3AK-QT3-RMG-QPBC74A-3AK-QD3-RMG-QDBC74A-4AK-AT3-RMG-QPBC74A-4AK-AD3-RMG-QDBC74A-4AK-QT3-RMG-QPBC74A-4AK-QD3-RMG-QDBC74A-6AK-AT3-RMG-QPBC74A-6AK-AD3-RMG-QDBC74A-6AK-QT3-RMG-QPBC74A-6AK-QD3-RMG-QDBP1A-100-A1AAP1A-100-M1AAP1A-200-A1AAP1A-200-M1AAP8A-660-A3DAP8A-660-M3DAP8A-860-A3DAP8A-860-M3DAPTH-100-A1AAPTH-200-A1AA
Dixon Norgren
Dixon - Norgren Cross Reference
Dixon's couplings and retention devices are designed to work safely for their intended use. The selection of theproper hose, coupling, and retention devices; and the proper application of the coupling to the hose are of utmostimportance. Users must consider the size, temperature, application, media, pressure, and hose and couplingmanufacturer's recommendations when selecting the proper hose assembly components. Dixon recommends that allhose assemblies be tested in accordance with the Rubber Manufacturers Association's recommendations and beinspected regularly (before each use), to ensure that they are not damaged or have become loose.
Where safety devices are integral to the coupling, they must be working and utilized. The use of supplementarysafety devices, such as safety clips and King Cable safety cables, are recommended. If any problem is detected,couplings must be removed from service immediately.
Dixon is always available for consultation concerning the couplings and accessories we sell. We will suggest theappropriate fittings, test those applications when necessary, and train distributors in assembly procedures. We stronglyrecommend that distributors and end users make use of these services. Dixon can be contacted at 877.963.4966.
Dryers
W74D-2A-MB32W74D-2A-MB7
W74D-2AD-NMNW74D-2AN-NPN
Dixon Norgren
Safety Statement
Cross-Reference
4 Customer Service: 877.963.4966
Three main types of filters exist: The general purpose filter for water and particles, the coalescing oil removal filter foroil aerosols and the activated carbon filter for the removal of oil vapors. The general purpose filter is used for mostfilter applications and is available from 1/8" to 2" pipe sizes. Uses are main headers, branch lines, tools, cylinders,valves and valve circuits, air agitators etc. Oil removal filters are used where very clean, oil-free air is required, such asfor the supply to instrumentation, air gauging equipment and air bearings. Activated carbon filters are used for systemswhere the oil vapors in the air are not acceptable; such as instrumentation and paint spraying.
How Do General Purpose Filters Work?The dirt and moisture-laden air enters the inlet port and
is directed into the louvres which centrifugally separatethe entrapped liquids and dirt which fall to the bottom ofthe bowl. Near the bottom of the bowl a baffle creates aquiet zone, preventing the turbulent air re-entrapping thecontaminants. The air, now free of water droplets andlarge dirt particles, passes through the filter elementwhich removes small dirt particles.
How Do Oil Removal Filters Work?The fine oil mist is coalesced (merged) as it passes
through the fine fibrous filtration media. These oil dropletsare collected in the outer sock and then drop from theelement to the bottom of the bowl for easy removal.
Where a coalescing filter is being used for oil removal,the element quickly becomes saturated which is clearlyvisible on the outer sock. This is the normal operatingcondition for oil removal.
How do Vapor Removal Filters Work?Carbon filters are used to remove oil vapors (odors).
The activated carbon has a porous structure whichresults in a large surface area. The oil vapors are at-tracted and adhere to this surface. There is usually asmall sintered medium included in an activated carbonelement to prevent the carbon particles from migratingdownstream. The carbon filter reduces the maximum oilcontent of air leaving the filter to 0.003 ppm at 70°F, forexample to ISO 8573 class 1.7.1.
Why use a Pre-Filter?A pre-filter is simply a general purpose filter placed
upstream of a higher grade filter to remove the majority ofthe water and larger particle contaminants and thuslengthen the life of the higher grade filter element. A 5micron pre-filter should always be used ahead of an oil orvapor removal filter.
FiltersGeneral Overview
Coalescing Filter
Bowl
Element
Outer sock
Metal bowl sight glass
Collected condensate
Body
Serviceindicator
Drain
Metal bowlsight glass
General Purpose Filter
Element
Centre post
Collected condensate
Body
Service indicator(optional)
Drain
Louvre
Bowl
Baffle
5Customer Service: 877.963.4966
Excessive pressure drop
Dirt passing through filter
Water passing through filter
Crazing of Polycarbonatebowlor milky appearance
Water beyond the filter
Micron rating of element too small
Filter element blocked
Flow requirement greater thanfilter capacity.
Element seals missing ordefective (N.B. seals notrequired on some units).
Damaged element
Water level in bowl abovebaffle
Flow capacity of filterexceeded
Bowl has been cleaned withincompatible fluid
Bowl is being used in an areacontaining fumes or vaporsincompatible with polycarbonate.
Compressor oil vapor may becausing problem
Air intake to compressor maycontain fumes or vapor incompatiblewith polycarbonate.
Inlet air has a high temperatureand as it cools downstream,moisture condenses to water.
Use larger micron element size forapplication.
1.Clean element (not coalescing element).2.Replace with new element.
Use larger filter
1.Replace seal2.Tighten element
Replace element
Drain water
Maintain flow within capacityof filter or change to filtercapable of handling desired flows.
Replace bowl(Clean only with clean warm water and soap.)
Replace bowlEliminate source of problem orconvert from plastic to metal bowls.
Replace bowlEliminate source of problem orconvert from plastic to metal bowls.
Replace bowlEliminate source of problem orconvert from plastic to metal bowls.
Fit dryer, pre-cool air or fitfilter immediately prior to application.
Simple Filter Troubleshooting
Malfunction Possible Cause Remedy
Filter Information
6 Customer Service: 877.963.4966
Regulators ideally provide a constant outlet pressure independent of variations in inlet pressure or flow.Regulators are typically used to:
a) reduce pressure to the level required for downstream equipmentb) limit the force of cylindersc) minimize pressure variation at the point of use
The range of different regulators and options within each type are wide and varied, but each can broadly be put intoone of 3 categories.
• general purpose regulators• pilot operated regulators• application specific regulators
General Purpose Regulators:General purpose regulators are designed to give the
maximum flow capacity (for their size) while maintaining,to a reasonable accuracy, the outlet pressure to the setlevel. They are used to control pressures in compressedair line installations to different parts of machines or topneumatic tools and motors. General purpose regulatorsare available in relieving or non-relieving types. Relievingregulators can be adjusted from a high pressure to a lowpressure. Even in a dead end situation relieving regulatorswill allow the excess downstream pressure to be ex-hausted. This causes a loud hissing sound which isperfectly normal. Non-relieving regulators when similarlyadjusted will not allow the downstream pressure to es-cape. The trapped air will need to be released in someother way, for example by operating a downstream valve.General purpose regulators have a control spring whichacts on a diaphragm to regulate the air pressure. Therating of this control spring determines the adjustmentrange of the regulator. The outlet pressure setting isobtained by turning the knob (or T handle) clockwise toincrease pressure, counter clockwise to decrease pres-sure.
RegulatorsGeneral Overview
General Purpose Regulator
Diaphragm
Control spring
Valve pin
Adjusting screw
Knob
Valve
Spring rest
Relief seat
Adjusting nut
Valve spring
Bottom plug
7Customer Service: 877.963.4966
Regulator creep (increase insecondary pressure due toleak from primary)
Won’t relieve secondarypressure
Won’t reach desiredpressure
Excessive leak from reliefhole
Regulator chatter
Regulator difficult to adjust
Dirty or cut valve elastomers.Nick in valve seat.
Non-relieving diaphragm assembly.
Regulating spring with low springrate.
Damaged relief seat. Ruptureddiaphragm.
Leakage past valve causingsecondary to increase somewhatand open relief seat.
A resonant condition is generallyonly encountered under a certainset of conditions of flow and pres-sure and then only in some applica-tions in which regulator couples withother system components.
Adjusting screw or knob lockingdevice in locked position.
Contaminants in adjusting screwthreads.
Replace or clean valve. If body orvalve seat is damaged it can bereplaced on some models. Onothers replacement of completeregulator is required.
If this feature is required, replacewith relieving type diaphragmassembly.
Use regulating spring with springrate designed to cover desired range.
Replace diaphragm assembly
Replace or clean valve
Replace spring with a higher pressure rangespring.
Replace with a piston type regulatorsince they have less tendency tochatter.
Pull to unlock knob and adjust; pushknob to lock.
Threaded adjusting screws: loosenlock nut, remove adjusting screw,clean thread and lubricate.
Place some lubricant on tip of screw.
Simple Regulator Troubleshooting
Problem Problem cause Remedy
Regulator Information
8 Customer Service: 877.963.4966
Filter/regulators combine the features of a filter and regulator with a single compact body. Air passes through the filtersection first removing water and particle contaminants, and is then regulated by the top regulator section.
See individual filter and regulator sections for details.
Performance characteristics:The regulator section of the filter/regulator determines
the flow and regulation characteristics of the unit.Flow is therefore measured in terms of
pressure drop from set pressure (see regulators) and notflow versus pressure drop as in a filter.
Regulation characteristics are determined inthe same way as regulators.
Filter/RegulatorGeneral Overview
General Purpose Filter/Regulator
Center post
Element
Metal bowl sight glass
Collected condensate
Bowl
Baffle
Drain
Diaphragm
Control spring
Valve pin
Adjusting screw
Knob
Valve
Spring rest
Relief seat
Adjusting nut
Valve spring
9Customer Service: 877.963.4966
Information
Dixon offers two main types of lubricators: Micro-Fog and Oil-Fog.These units are mounted directly into the pipe and add small amounts of oil to the air flowing through them.
Micro-Fog Lubricators:The oil droplets seen in the sight dome are atomized
and collected in the area above the oil in the bowl. Thesmaller lighter particles are drawn into the air flow andpass downstream. As a result typically only 10% of the oilseen as drops in the sight dome is passed downstream.The remainder falls back into the oil reservoir. Conse-quently, drip rate settings are somewhat higher than theiroil-fog equivalent. This makes setting much easier,particularly in low flow applications. The fine micro-fog oilparticles can travel long distances through complex pipework making micro-fog lubricators suitable for multiplevalve and cylinder circuits.
Oil Fog-Lubricators:All the oil droplets seen in the sight dome are added
directly into the air flow. This results in relatively large oildroplets passing downstream, suitable for heavy lubrica-tion applications, for example single cylinders and tools.Most competitive in line lubricators are of the oil-fog type.
LubricatorGeneral Overview
Micro-Fog Lubricator
Sight dome
Bowl
General assembly
Syphon tube
Oil
Body
Drain (optional)
Metal bowlsight glass
Flow sensor
Oil-Fog Lubricator
Bowl
Check valve
Syphon tube
Oil
Body
Sight dome
Drain (optional)
Metal bowlsight glass
Flow sensor
10 Customer Service: 877.963.4966
Micro-Fog:• Small oil particles; less than 2 micron• Only 10% of ‘drip rate’ is delivered downstream as active lubricant (remainder is returned to main oil reservoir)• High drip rates make drip setting easier in low flow applications• Can be mounted above or below the point of application• Cannot be filled without shutting off upstream air (unless a quick fill cap or remote fill device is used)• For use with lengthy air lines, multiple valve and cylinder circuits• Has a flow sensor to provide an almost constant oil output density for varying flows
Oil-Fog:• Large oil particles not as fine as micro-fog• All oil drips seen in sight domes are delivered downstream.• For applications over short distances• Should be mounted at same level or higher than device being lubricated• Standard bowls can be filled under pressure (not on rapid cycle units)• Suitable for heavy lubrication applications, for example single large cylinders and tools• Has a flow sensor which provides constant oil output density for varying flows
Can Oil-Fog and Micro-Fog Units be Converted?Generally not, simply changing a green (oil-fog) sight dome for a red (micro-fog) sight dome does not change the
function. Some lubricators are designed around a cartridge insert. In this case it may be possible to swap the cartridgeand sight domes to change the function.
What Are The Differences Between Micro-Fog and Oil-Fog?
Setting Lubricator Drip RatesWhat is the Correct Drip Rate Setting?
The drip rate will depend on the application, the amount of lubrication required, the flow through the lubricator and thelubricator type. In micro-fog lubricators only 10% of the droplets in the sight dome are carried downstream. The driprate in micro-fog lubricators therefore tends to be much higher. The following table can be used to estimate drip rate forrequired flow. This is very much a rule of thumb. In practice it is necessary to fine tune the oil drip rate in each applica-tion.
Can the Drip Rate be Shut Off?In lubricators with needle valve type sight dome, yes. Some Norgren sight domes use a felt pad which is soaked in oil
at the point where the drops are formed. With this type of sight dome the oil droplets cease once the felt pad dries out.With the new style dome (L72/73/74 and L07) complete shut off is not possible. Minimum adjustment for the drip rate isaround 1 drop per minute.
10 (5)20 (10)30 (15)40 (20)50 (25)60 (30)
24681012
20406080100120
Typical Drip Rateper minutemicro-fog
Typical Drip Rateper minute
oil-fog
Approximateflow
scfm (dm3/s)
11Customer Service: 877.963.4966
1 pint 1 gallon
Lubricator Information
No Drip Rate
Oil Foaming
Oil Emulsified
Drip Rate changes aftersetting
Oil adjustment knob fully clockwise
Low oil level
Airflow through lubricator too low
Blocked oil filter screen
Air leaks
Over aeration
Water in lubricator
Fade
Readjust knob.
Check oil level.
Use smaller size lubricator.
Remove bowl and sight feedadjustment dome and clear syphontube.
Remove sight feed adjustment domeand clean or replace screen locatedin dome assembly.
Check bowl, filler plug and sightdome seals. Tighten if necessary.
Check bowl seals for slight leaks.
Fit filter immediately upstream.
Readjust drip rate.
Simple Lubricator Troubleshooting
Problem Possible cause Remedy
Micro-Fog:The standard micro-fog unit can only be filled without isolating the upstream pressure if a remote fill or quick fill nipple
accessory is fitted. To remove the fill plug of a micro-fog lubricator while under pressure can be dangerous. If in doubtshut off the upstream air!
Oil-Fog:The standard oil-fog lubricators can be filled under pressure, for example without switching off the upstream air.
When a fill plug is removed a check valve in the lubricator body isolates the inlet pressure from the bowl and thereservoir will depressurize. The lubricator can then be filled with oil. When the fill plug is replaced, the reservoir willrepressurize.
Filling Methods
Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which willreadily break up into a mist, i.e., Mobil DTE light or comparable oil. Do not use anysynthetic oil or oils containing additives or solvents.
Avoid Lubricator ProblemsUse an Approved Air Tool Oil
Dixon offers a specially formulated high grade lubricant that prolongs the service life of airtools, cylinders and accessories while permitting maximum performance. It is available inone pint (DAT016), and one gallon (DAT128) size containers.See the current Dixon Price List for more information.
12 Customer Service: 877.963.4966
Carded Mini'sDixon offers the Series I line of Miniature Filters, Filter/Regulators, Regulators and Lubricators in prepack-aged clear plastic units suitable for hanging on store peg racks or displays. The primary features of eachunit are printed on the packaging. Each package contains 1 Miniature Filter, Filter/Regulator, Regulator orLubricator and instruction sheet.
Carded Mini Filter/Regulators
• 1 oz. reservoir• 5-100 PSIG adjustable range• Relieving type diaphragm• Transparent bowl (guard not available)• 5-micron filter element• Push to lock adjusting knob• Supplied with a GC620 gauge
Carded Mini Regulators
• Relieving Type• Adjustable 5-100 PSIG• Regulation at flows up to 22 scfm at 100 PSIG• Inlet pressure 250 PSI maximum• Supplied with a GC620 gauge
• 1 oz. reservoir• Transparent bowls• 5-micron element standard• Inlet pressure 150 PSI maximum
Carded Mini Lubricators
• Transparent bowl• 1 oz. reservoir with drain standard• Inlet pressure 150 PSI maximum
Carded Mini Filters
Part #SizePart #
F07-200AC
Size
1/4" 1/4" F07-200MC
Manual DrainAutomatic Drain
SCFM
21
SCFM
21
Part #
R07-200RGC
Size
1/4"
with Gauge
SCFM
20
Part #SizePart #
B07-202AGC
Size
1/4" 1/4" B07-202MGC
Manual DrainAutomatic Drain
SCFM
21
SCFM
21
Part #
L07-200AC
Size
1/4"
with Gauge
SCFM
14
13Customer Service: 877.963.4966
Mini Filters
Miniatures
Mini Regulators
Mini Filter/Regulators
Mini Lubricators
• Transparent bowls• 5-micron element standard
• 1 oz. reservoir• Inlet pressure 150 PSI maximum
Part #SizePart #
F07-100AF07-200A
Size
1/8"1/4"
1/8"1/4"
F07-100MF07-200M
Manual DrainAutomatic Drain
SCFM
1821
SCFM
1821
• Relieving Type• Supplied with a GC620 gauge
• 5-100 PSIG adjustable range• Inlet pressure 300 PSI maximum
Part #SizePart #
R07-100RGR07-200RG
Size
1/8"1/4"
1/8"1/4"
R07-100RR07-200R
without Gaugewith Gauge
SCFM
2222
SCFM
2222
• 5-100 PSIG adjustable range• Relieving type diaphragm• Transparent bowl
(guard not available)• 5-micron filter element
• Push to lock adjusting knob• 1 oz. reservoir• Inlet pressure 150 PSI maximum• Supplied with a GC620 gauge
Part #SizePart #
B07-102AGB07-202AG
Size
1/8"1/4"
1/8"1/4"
B07-102MGB07-202MG
Manual DrainAutomatic Drain
SCFM
1821
SCFM
1821
• Transparent bowl• 1 oz. reservoir with drain standard• Inlet pressure 150 PSI maximum
Part #
L07-100AL07-200A
Size
1/8"1/4"
SCFM
1414
Miniature Non-Repairable General Purpose Regulators
• Relieving piston design allowsreduction of downstreampressure when the systemis dead-ended.
• Left to right flow• Supplied with a GC620 gauge
• 5 to 125 PSIG outlet pressureadjustment range
• Compact design and lightweightconstruction
• Wrench flats for easy installation
Part #SizePart #
R46-200RG
Size
1/4" 1/4" R46-200R
without Gaugewith Gauge
SCFM
13
SCFM
13
1.97
(50
)0.
33 (
8)
1.63 (41)
1.65 (42) Dia.
14 Customer Service: 877.963.4966
(Filter, Regulator, Lubricator)Mini Combination Units
Micro Mate Combination Units
• 5-125 PSIG adjustable range• 1 oz. reservoir• Inlet pressure 150 PSI maximum• Supplied with a GC620 gauge
• Automatic drain on filter• Requires only 2 pipe
connections.• 5-125 PSIG adjustable range• Inlet pressure 150 PSI maximum
Part #
PTH-100AGPTH-200AG
Size
1/8"1/4"
1010
Part #SizePart #
P1A-100AP1A-200A
Size
1/8"1/4"
1/8"1/4"
P1A-100MP1A-200M
Manual DrainAutomatic Drain
SCFM
1010
SCFM
1010
15Customer Service: 877.963.4966
Dixon FRL's are rugged and long lasting units for compressed air service, or water or gas service if indicated.Units may be purchased assembled or individually. Please consult Dixon for special service on these and allhose fittings.
Filters
• 2 oz. reservoir• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40-Micron filter element standard• Particle removal per ISO 8573-1, Class 5 and Class 3• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI maximum
• 4 oz. reservoir• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40-Micron filter element standard• Particle removal per ISO 8573-1, Class 5 and Class 3• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI maximum
1/4" Basic - Transparent Bowl
Part #SizePart #
F72G-2AF72G-3A
Size
1/4"3/8"
1/4"3/8"
F72G-2MF72G-3M
Manual DrainSemi-automatic Drain
SCFM
5555
SCFM
5555
1/4" Basic - Metal Bowl with Sight Glass
Part #SizePart #
F72G-2A-MBF72G-3A-MB
Size
1/4"3/8"
1/4"3/8"
F72G-2M-MBF72G-3M-MB
Manual DrainSemi-automatic Drain
SCFM
5555
SCFM
5555
3/8" Basic - Transparent Bowl
Part #SizePart #
F73G-2AF73G-3AF73G-4A
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
F73G-2MF73G-3MF73G-4M
Manual DrainSemi-automatic Drain
SCFM
536569
SCFM
536569
3/8" Basic - Metal Bowl with Sight Glass
Part #SizePart #
F73G-2A-MBF73G-3A-MBF73G-4A-MB
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
F73G-2M-MBF73G-3M-MBF73G-4M-MB
Manual DrainSemi-automatic Drain
SCFM
536569
SCFM
536569
Airline Filters
16 Customer Service: 877.963.4966
Filters
• 7 oz. reservoir• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40-Micron filter element standard• Particle removal per ISO 8573-1, Class 5 and Class 3• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI maximum
• 1 qt. reservoir• General purpose with low pressure drop and excellent
water removal characteristics.• Metal bowl with sight glass• 50-Micron element standard• Inlet pressure is 250 PSI maximum
• 2 gal. metal bowl with sight glass• 50-micron element standard• Inlet pressure is 250 PSI maximum
1/2" Basic - Transparent Bowl with Guard
Part #SizePart #
F74G-3AF74G-4AF74G-6A
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
F74G-3MF74G-4MF74G-6M
Manual DrainSemi-automatic Drain
SCFM
112140140
SCFM
112140140
1/2" Basic - Metal Bowl with Sight Glass
Part #SizePart #
F74G-3A-MBF74G-4A-MBF74G-6A-MB
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
F74G-3M-MBF74G-4M-MBF74G-6M-MB
Manual DrainSemi-automatic Drain
SCFM
112140140
SCFM
112140140
1" Basic - Metal Bowl with Sight Glass
Part #SizePart #
F17-600AF17-800AF17-A00AF17-B00A
Size
3/4"1"
1-1/4"1-1/2"
3/4"1"
1-1/4"1-1/2"
F17-600MF17-800MF17-A00MF17-B00M
Manual DrainSemi-automatic Drain
SCFM
325425425425
SCFM
325425425425
2" Basic - Metal Bowl with Sight Glass
Part #SizePart #
F18-C00A
Size
2" 2" F18-C00M
Manual DrainSemi-automatic Drain
SCFM
1400
SCFM
1400
Airline Filters
17Customer Service: 877.963.4966
Filters
Oil Vapor Removal Filters
• In-line or modular installation• Quick-release bayonet metal bowl• Prismatic liquid level indicator• F74C and F74H provide Air Quality Class 2 Hydrocarbon and Class 1 Particulate Removal per ISO 8573-1• Element removes particles down to 0.01mm. Maximum remaining oil content of air leaving the filter is 0.01 ppm
at 70°F (21°C) with an inlet concentration of 8 ppm.• Service life indicator turns from green to red when element needs to be replaced.
3535
7075
SCFMSaturated Element
SCFMDry Element
1/2" Basic, Standard Flow - Metal Bowl
Part #
F74C-3A-MBF74C-4A-MB
Size
3/8"1/2"
Automatic Drain
6060
100120
SCFMSaturated Element
SCFMDry Element
1/2" Basic, High Flow - Metal Bowl
Part #
F74H-4A-MBF74H-6A-MB
Size
1/2"3/4"
Automatic Drain
Oil Removal (coalescing) Filters
• In-line or modular installation• Quick-release bayonet metal bowl• Activated carbon cartridge filter element absorbs oil vapors and
removes most hydrocarbon odors• Filter and element designs optimizes air velocity and contact time
to reduce oil content of air leaving the filter to 0.003 ppm at 70°F (21°C).• Long service life of carbon cartridge element• Minimum service life of 400 hours can be expected if the vapor removal filter is
protected upstream by an oil removal (coalescing) filter and if the filtrationtemperature is in the region of 70° to 80°F (21° to 26°C). Above this range, oil vapor content ofcompressed air increases substantially and element service life is reduced.
• F74C and F74V combinations provide Air Quality Class 1 Particulate Removalper ISO 8573-1, Class 1.-.1
For maximum service life install a general purpose filter upstream of the oil removal filter.
For maximum service life install a general purpose filter upstream of the oil removal filter.
1/2" Basic - Metal Bowl
Part #
F74V-3A-MBF74V-4A-MBF74V-6A-MB
Size
3/8"1/2"3/4"
SCFM
212121
18 Customer Service: 877.963.4966
• Two 1/4" high flow capacityfull-flow gauge ports
• Relieving type
• Adjustable 5-125 PSI• Inlet pressure 300 PSI maximum• Supplied with a GC230 gauge
• Two 1/4" high flow capacityfull-flow gauge ports
• Relieving type
• Adjustable 5-125 PSI• Inlet pressure 450 PSI maximum• Supplied with a GC230 gauge
• In-line or modular installation• Two 1/4" full-flow gauge ports• Relieving type
• Adjustable 5-150 PSI• Inlet pressure 300 PSI maximum• Supplied with a GC230 gauge
• In-line or modular installation• Two 1/4" full-flow gauge ports• Relieving type
• Adjustable 5-150 PSI• Inlet pressure 300 PSI maximum• Supplied with a GC230 gauge
• In-line or modular installation• Two 1/8" full-flow gauge ports• Relieving type
• Adjustable 5-150 PSI• Inlet pressure 300 PSI maximum• Supplied with a GC620 gauge
1/4" Basic
Part #SizePart #
R72G-2RGR72G-3RG
Size
1/4"3/8"
1/4"3/8"
R72G-2RR72G-3R
without Gaugewith Gauge
SCFM
7070
SCFM
7070
3/8" Basic
Part #SizePart #
R73G-2RGR73G-3RGR73G-4RG
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
R73G-2RR73G-3RR73G-4R
without Gaugewith Gauge
SCFM
91144144
SCFM
91144144
1/2" Basic
Part #SizePart #
R74G-3RGR74G-4RGR74G-6RG
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
R74G-3RR74G-4RR74G-6R
without Gaugewith Gauge
SCFM
208220220
SCFM
208220220
For 0-60 PSI range R72, R73 or R74 unit, add a L to the end of the part number.
1" Basic
Part #SizePart #
R17-600RGR17-800RGR17-A00RGR17-B00RG
Size
3/4"1"
1 1/4"1 1/2"
3/4"1"
1 1/4"1 1/2"
R17-600RR17-800RR17-A00RR17-B00R
without Gaugewith Gauge
SCFM
440480400440
SCFM
440480400440
2" Basic
Part #SizePart #
R18-C05RG
Size
2" 2" R18-C05R
without Gaugewith Gauge
SCFM
2000
SCFM
2000
Regulators
19Customer Service: 877.963.4966
1.97
(50
)0.
33 (
8)
1.63 (41)
1.65 (42) Dia.
Cylinder Gas RegulatorUL listed for service with Carbon Dioxide, water, pumped air, Nitrogen, Argon, Helium, Krypton, Neon and Xenon.Not to be used with flammable gases.
Manifold RegulatorsManifold up to six regulators on a single air supply. Design allows in-line installation with hex nipple or modularinstallation with 72 Series accessories (see pages 34-35).
General RegulatorsFloating valve pin provides positive seating and dependibility. Large diaphragm provides quick response to flowdemands and line pressure changes. Balanced valve reduces inlet pressure variations on oulet pressure.
• T-handle adjustmentstandard
• Adjustable 5-125 PSI• Inlet pressure 400 PSI
maximum• Supplied with a GC620 gauge
• Adjustable 5-150 PSI• Inlet pressure 300 PSI maximum• Supplied with a GC620 gauge
• Relieving type• Two ports for high pressure
and two ports for service.• Adjustable 5-125 PSI• Inlet pressure 3000 PSI
maximum
Regulators
1/4" Basic
Part #SizePart #
R72M-2RGR72M-3RG
Size
1/4"3/8"
1/4"3/8"
R72M-2RR72M-3R
without Gaugewith Gauge
SCFM
8383
SCFM
8383
with Gauge
Part #R11-013RGR11-037RGR11-061RG
Size
1/4"3/8"1/2"
SCFM
110110260
without Gauge
Part #R83-200R
Size
1/4"
SCFM
10
Miniature Non-Repairable General Purpose Regulators
• Relieving piston design allowsreduction of downstreampressure when the systemis dead-ended.
• Left to right flow• Supplied with a GC620 gauge
• 5 to 125 PSIG outlet pressureadjustment range
• Compact design and lightweightconstruction
• Wrench flats for easy installation
Part #SizePart #
R46-200RG
Size
1/4" 1/4" R46-200R
without Gaugewith Gauge
SCFM
13
SCFM
13
20 Customer Service: 877.963.4966
9.50
(24
1)
5.00 (127)
1.62
(41
)
Miniature Water Regulator
Used in water systems to reduce and maintain pressure at a nearly constant level despite changes in the inletpressure and changes in downstream flow requirements. Brass body and Aluminum bonnet.
Designed for use with deionized water and potable water systems. Plastic and metals in contact with fluid areapproved by the National Sanitation Foundation (NSF) or the Food and Drug Administration (FDA) for use inpotable water systems. Elastomers are food grade.
Water Regulators
• T-handle adjustment standard• Non-relieving type• Gauge port is full-flow and can
be used as an outlet port• Adjustable 5-125 PSI• Inlet pressure 400 PSI
maximum• Supplied with a GC230 gauge
• Non-relieving type• Supplied with a GC620 gauge
with Gauge
Part #R43-201RGR43-301RGR43-406RG
Size
1/4"3/8"1/2"
GPM
5510
with Gauge
Part #R91-221RG
Size
1/4"
GPM
1.75
Balanced valve minimizes effects of the inlet pressure variations on outlet pressure. Body, valve and bottomplug are brass. Bonnet is aluminum and steel. Elastomers are nitrile.
Water Pressure Regulators
• T-handle adjustment standard• Non-relieving type• Maximum pressure: 400 PSI• Operating temperature:
water service: 35° to 200°F(2° to 93°C)air service: -30° to 200°F(-34° to 93°C)
• Supplied with a GC230 gauge
with Gauge
Part #11-009-06511-009-081
Size
3/4"1"
GPM
27.527.5
21Customer Service: 877.963.4966
Filters/Regulators
• 2 oz. reservoir• Adjustable pressure from 5-150 PSI• Inlet pressure for transparent bowl
is 150 PSI• Inlet pressure for metal bowl
is 250 PSI maximum• Supplied with a GC620 gauge
• In-line or modular installation• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40 micron filter element standard• Particle removal per ISO 8573-1,
Class 5 and Class 2
1/4" Basic - Transparent Bowl
Part #SizePart #
B72G-2AGB72G-3AG
Size
1/4"3/8"
1/4"3/8"
B72G-2MGB72G-3MG
Manual DrainAutomatic Drain
SCFM
8080
SCFM
8080
1/4" Basic - Metal Bowl with Sight Glass
Part #SizePart #
B72G-2AG-MBB72G-3AG-MB
Size
1/4"3/8"
1/4"3/8"
B72G-2MG-MBB72G-3MG-MB
Manual DrainAutomatic Drain
SCFM
8080
SCFM
8080
3/8" Basic - Transparent Bowl
Part #SizePart #
B73G-2AGB73G-3AGB73G-4AG
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
B73G-2MGB73G-3MGB73G-4MG
Manual DrainAutomatic Drain
SCFM
78123123
SCFM
78123123
3/8" Basic - Metal Bowl with Sight Glass
Part #SizePart #
B73G-2AG-MBB73G-3AG-MBB73G-4AG-MB
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
B73G-2MG-MBB73G-3MG-MBB73G-4MG-MB
Manual DrainAutomatic Drain
SCFM
78123123
SCFM
78123123
• In-line or modular installation• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40 micron filter element standard• Particle removal per ISO 8573-1,
Class 5 and Class 2
• 2 oz. reservoir• Adjustable pressure from 5-150 PSI• Inlet pressure for transparent bowl
is 150 PSI• Inlet pressure for metal bowl is
250 PSI maximum.• Supplied with a GC230 gauge
Filters / Regulators
22 Customer Service: 877.963.4966
• Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or morepoints of lubrication, cylinders and multiple or single tools.
• Air flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the foggenerator and atomized into a fine mist. Lightweight particles are delivered downstream for lubrication.Heavier particles fall back into the reservoir.
• The micro-fog lubricator delivers 10% of the oil drops visible through the transparent sight-feed dome.• Micro-fog lubricators cannot be filled under pressure.
• 2 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil
rated 50 to 200 SSU (ISO Grade 7 to 46) at 100°F.
1/4" Basic - Transparent Bowl
Part #
L72M-2L72M-3
Size
1/4"3/8"
SCFM
5151
Micro-Fog Design Lubricators
1/4" Basic - Metal Bowl with Sight Glass
Part #
L72M-2MBL72M-3MB
Size
1/4"3/8"
SCFM
5151
1/2" Basic - Transparent Bowl
Part #SizePart #
B74G-3AGB74G-4AGB74G-6AG
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
B74G-3MGB74G-4MGB74G-6MG
Manual DrainAutomatic Drain
SCFM
163212212
SCFM
163212212
1/2" Basic - Metal Bowl with Sight Glass
Part #SizePart #
B74G-3AG-MBB74G-4AG-MBB74G-6AG-MB
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
B74G-3MG-MBB74G-4MG-MBB74G-6MG-MB
Manual DrainAutomatic Drain
SCFM
163212212
SCFM
163212212
• 1/2 pt. reservoir• 5-125 PSIG adjustable range• Relieving type diaphragm• 40-micron filter element
• Non-rising adjustment with easilysealed lockring to resist tampering.
• Other pressure ranges available• Supplied with a GC230 gauge
Filters / Regulators
23Customer Service: 877.963.4966
Lubricators
• 4 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist.• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated
50 to 200 SSU (ISO Grade 7 to 46) at 100°F.
3/8" Basic - Transparent Bowl
Part #
L73M-2L73M-3L73M-4
Size
1/4"3/8"1/2"
SCFM
707070
3/8" Basic - Metal Bowl with Sight Glass
Part #
L73M-2MBL73M-3MBL73M-4MB
Size
1/4"3/8"1/2"
SCFM
707070
• 7 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist.• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated
50 to 200 SSU (ISO Grade 7 to 46) at 100°F.
1/2" Basic - Transparent Bowl with Guard
Part #
L74M-3L74M-4L74M-6
Size
3/8"1/2"3/4"
SCFM
114154142
1/2" Basic - Metal Bowl with Sight Glass
Part #
L74M-3MBL74M-4MBL74M-6MB
Size
3/8"1/2"3/4"
SCFM
114154142
Lubricators
24 Customer Service: 877.963.4966
• Designed for use with alcohol or other anti-freeze agents when units are installed in cold temperature environments.• Pyrex® sight feed dome with aluminum case and fluorocarbon O-Rings and seals; Pyrex® sight glass on bowls and
metal petcock drain.• Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or more points of
lubrication, cylinders and multiple or single tools.• Air flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator
andatomized into a fine mist. Lightweight particles are delivered downstream for lubrication. Heavier particles fallback into the reservoir.
• The micro-fog lubricator delivers 10% of the oil drops visible through the transparent sight-feed dome.• Micro-fog lubricators cannot be filled under pressure.
1/4" Basic - Metal Bowl with Sight Glass
Part #L72M-2MBPXL72M-3MBPX
Size
1/4"3/8"
SCFM
5151
• 2 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist.• Quick release bayonet bowl• Inlet pressure for metal bowl is 250 PSI
• Maximum temperature for metal bowlis 175°F
• Recommended lubricants: Use amisting type oil rated 50 to 200 SSU(ISO Grade 7 to 46) at 100°F.
• 2 gal. reservoir• Oil flow can be positively set• Reservoirs are ASME construction• Inlet pressure 250 PSI maximum
• 1 qt. metal reservoir with drain and oil level sight gauge• One turn threaded bowl attachment permits easy
maintenance• Inlet pressure 250 PSI maximum.
1" Basic - Metal Bowl with Sight Glass
Part #
L17-600AL17-800AL17-A00AL17-B00A
Size
3/4"1"
1-1/4"1-1/2"
SCFM
160275275275
General Purpose - 2" Ports(Oil-Fog ONLY)
Part #
10-076-004
Size
2"
SCFM
1000
Micro-Fog, Pyrex® Sight Feed Dome Lubricators
Lubricators
25Customer Service: 877.963.4966
• 7 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist• Quick release bayonet bowl• Inlet pressure for metal bowl is 250 PSI
• Maximum temperature for metal bowlis 175°F
• Recommended lubricants: Use amisting type oil rated 50 to 200 SSU(ISO Grade 7 to 46) at 100°F.
Micro-Fog, Pyrex® Sight Feed Dome Lubricators
3/8" Basic - Metal Bowl with Sight Glass
Part #
L73M-2MBPXL73M-3MBPXL73M-4MBPX
Size
1/4"3/8"1/2"
SCFM
606060
• 4 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist• Quick release bayonet bowl• Inlet pressure for metal bowl is 250 PSI
• Maximum temperature for metal bowlis 175°F
• Recommended lubricants: Use amisting type oil rated 50 to 200 SSU(ISO Grade 7 to 46) at 100°F.
1/2" Basic - Metal Bowl with Sight Glass
Part #
L74M-3MBPXL74M-4MBPXL74M-6MBPX
Size
3/8"1/2"3/4"
SCFM
114154142
• 1 qt. metal reservoir with drain andoil level sight gauge
• Inlet pressure 250 PSI maximum
• Particle removal per ISO 8573-1,Class 5 and Class 2
• One turn threaded bowl attachmentpermits easy maintenance
1" Basic - Metal Bowl with Sight Glass
Part #
L17-600APXL17-800APXL17-A00APXL17-B00APX
Size
3/4"1"
1-1/4"1-1/2"
SCFM
160275275275
Lubricators
26 Customer Service: 877.963.4966
• 2 oz. reservoir• In-line or modular installation• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated
50 to 200 SSU (ISO Grade 7 to 46) at 100°F.
• 4 oz. reservoir• In-line or modular installation• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated
50 to 200 SSU (ISO Grade 7 to 46) at 100°F.
• Oil-fog lubricators, identified by a green adjusting screw, are used for lubricating a single air tool or air motor,and are located as near the device as possible.
• All the oil visible dropping through the transparent sight-feed dome goes to the airstream.• L72C, L73C and L74C OIL-FOG lubricators can be filled under pressure.
Oil-Fog Design Lubricators
1/4" Basic - Transparent Bowl
Part #L72C-2L72C-3
Size
1/4"3/8"
SCFM
5151
1/4" Basic - Metal Bowl with Sight Glass
Part #L72C-2MBL72C-3MB
Size
1/4"3/8"
SCFM
5151
3/8" Basic - Transparent Bowl
Part #
L73C-2L73C-3L73C-4
Size
1/4"3/8"1/2"
SCFM
606060
3/8" Basic - Metal Bowl with Sight Glass
Part #
L73C-2MBL73C-3MBL73C-4MB
Size
1/4"3/8"1/2"
SCFM
606060
27Customer Service: 877.963.4966
• One turn threaded bowl attachment permits easymaintenance
• 1 qt. metal reservoir with drain and oil level sight gauge• Inlet pressure 250 PSI maximum
• 7 oz. reservoir• In-line or modular installation• Quick release bayonet bowl.• Inlet pressure for transparent bowl
is 150 PSI• Inlet pressure for metal bowl is 250 PSI
• Maximum temperature fortransparent bowl is 125°
• Maximum temperature formetal bowl is 175°F.
• Recommended lubricants: Use amisting type oil rated 50 to 200 SSU(ISO Grade 7 to 46) at 100°F.
Lubricators
Oil-Fog Design Lubricators
• Oil-fog lubricators, identified by a green adjusting screw, are used for lubricating a single air tool or air motor,and are located as near the device as possible.
• All the oil visible dropping through the transparent sight-feed dome goes to the airstream.• L72C, L73C and L74C oil-fog lubricators can be filled under pressure.
1/2" Basic - Transparent Bowl with Guard
Part #
L74C-3L74C-4L74C-6
Size
3/8"1/2"3/4"
SCFM
118192186
1/2" Basic - Metal Bowl with Sight Glass
Part #
L74C-3MBL74C-4MBL74C-6MB
Size
3/8"1/2"3/4"
SCFM
118192186
1" Basic - Metal Bowl with Sight Glass
Part #
L17-600DL17-800DL17-A00DL17-B00D
Size
3/4"1"
1-1/4"1-1/2"
SCFM
160275275275
General Purpose - 2" Ports
Part #
10-076-004
Size
2"
SCFM
1000
• 2 gal. reservoir• Oil flow can be positively set• Reservoirs are ASME construction• Inlet pressure 250 PSI maximum
28 Customer Service: 877.963.4966
316 Stainless Steel Pressure Regulators are used in compressed air systems to maintain pressures at levelssuitable for the proper operation of air-operated devices. They are designed for use where resistance to corrosionand chemical attack is required. Applications include process-control, petrochemical and marine applications.
Stainless Steel Lubricator - Oil-Fog DesignMaterials meet NACE (National Association of Corrosion Engineers) Standard MR-01-75 (1980 Revision) whichdefines requirements for materials which are resistant to sulphite stress cracking (SSC) for applications in oil fieldequipment. 316 Stainless Steel construction provides strength and resistance to corrosion and chemical attack.Pyrex® sight dome on body provides clear visibility of drip rate. Pyrex® sight glass on bowl has striped back-ground to provide clear visibility of liquid level. Flow sensor design provides a nearly constant oil/air ratio over awide range of air flows. Can be filled under pressure.
Materials meet NACE (National Association of Corrosion Engineers) Standard MR-01-75 (1980 Revision) whichdefines requirements for materials which are resistant to sulphite stress cracking (SSC) for applications in oil fieldequipment. 316 Stainless Steel construction provides strength and resistance to corrosion and chemical attack.Pyrex® sight glass with striped background provides clear visibility of liquid level and resistance to chemicalattack.
• Full-flow 1/4" gauge ports can be used asauxiliary flow ports
• Relieving type• Adjustable 5-150 PSI• Inlet pressure 290 PSI maximum
• 8 oz. bowl• 1/2" NPT port• Manual drain• Accurate drip rate adjustment• Inlet pressure for metal bowl is 250 PSI
• 8 oz. bowl• 25-Micron filter element standard• Inlet pressure for metal bowl is 250 PSI
Stainless Steel
Stainless Steel Filter
Stainless Steel Regulator
22 series - Metal Bowl with Sight Glass
Part #
L22-405MB
Size
1/2"
SCFM
102
22 series - Metal Bowl with Sight Glass
Part #
F22-405A-MB
Size
1/2"
SCFM
98
Automatic Drain
22 series
Part #
R22-405R
Size
1/2"
SCFM
106
without Gauge
29Customer Service: 877.963.4966
Combination Units
• 72 Series Combination Units areconnected modularly
• Includes 2 clamp and wall mountingbrackets #4214-52, 2 clamps #4214-51and 2 NPT pipe adapters.See modular components onpages 34-35 for other options.
• 2 oz. reservoir• Adjustable 5-150 PSI• Inlet pressure for transparent bowl
is 150 PSI• Inlet pressure for metal bowl is 250 PSI
maximum
Mini - Transparent Bowl
Part #SizePart #
P1A-100AP1A-200A
Size
1/8"1/4"
1/8"1/4"
P1A-100MP1A-200M
Manual DrainAutomatic Drain
SCFM
1010
SCFM
1010
• 1 oz. reservoir
1/4" Basic - Transparent Bowl
Part #SizePart #
E72-2AE72-3A
Size
1/4"3/8"
1/4"3/8"
E72-2ME72-3M
Manual DrainAutomatic Drain
SCFM
3636
SCFM
3636
• 2 oz. reservoir1/4" Basic - Metal Bowl with Sight Glass
Part #SizePart #
E72-2A-MBE72-3A-MB
Size
1/4"3/8"
1/4"3/8"
E72-2M-MBE72-3M-MB
Manual DrainAutomatic Drain
SCFM
3636
SCFM
3636
• 73 Series Combination Units areconnected modularly
• Includes 2 clamp and wall mountingbrackets #4314-52, 2 clamps#4314-51 and 2 NPT pipe adapters.See modular components onpages 34-35 for other options.
• 2 oz. reservoir• Adjustable 5-150 PSI• Inlet pressure for transparent bowl
is 150 PSI• Inlet pressure for metal bowl is 250 PSI
maximum
3/8" Basic - Metal Bowl with Sight Glass
Part #SizePart #
E73-2A-MBE73-3A-MBE73-4A-MB
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
E73-2M-MBE73-3M-MBE73-4M-MB
Manual DrainAutomatic Drain
SCFM
707070
SCFM
707070
3/8" Basic - Transparent Bowl
Part #SizePart #
E73-2AE73-3AE73-4A
Size
1/4"3/8"1/2"
1/4"3/8"1/2"
E73-2ME73-3ME73-4M
Manual DrainAutomatic Drain
SCFM
707070
SCFM
707070
Combination Units
30 Customer Service: 877.963.4966
Combination Units
• 74 Series Combination Units areconnected modularly
• Includes 2 clamp and wall mountingbrackets #4314-52, 2 clamps #4314-51and 2 NPT pipe adapters. See modularcomponents on pages 34-35 for otheroptions.
• 7 oz. reservoir• Adjustable 5-150 PSI• Inlet pressure for transparent bowl
is 150 PSI• Inlet pressure for metal bowl is 250 PSI
maximum
1" Basic - Metal Bowl with Sight Glass
Part #SizePart #
P8A-660AP8A-860A
Size
3/4"1"
3/4"1"
P8A-660MP8A-860M
Manual DrainAutomatic Drain
SCFM
160275
SCFM
160275
• 1 qt. reservoir
1/2" Basic - Metal Bowl with Sight Glass
Part #SizePart #
E74-3A-MBE74-4A-MBE74-6A-MB
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
E74-3M-MBE74-4M-MBE74-6M-MB
Manual DrainAutomatic Drain
SCFM
140140140
SCFM
140140140
1/2" Basic - Transparent Bowl
Part #SizePart #
E74-3AE74-4AE74-6A
Size
3/8"1/2"3/4"
3/8"1/2"3/4"
E74-3ME74-4ME74-6M
Manual DrainAutomatic Drain
SCFM
140140140
SCFM
140140140
These units are intended for use in industrial compressed air systems only. They must not beused where pressure or temperature may exceed maximum rated operating conditions. Thepolycarbonated plastic bowls used on these units can be damaged and possibly burst if exposedto such substances as certain solvents, strong alkalies, compressor oils that contain ester-basedadditives or synthetic oils. Fumes of these substances in contact with the polycarbonate bowl,externally or internally, can also result in damage. Clean with warm water only. Use metal bowlin applications where a plastic bowl might be exposed to substances that are incompatible withpolycarbonates. Not for use with fluids.Combination Units are supplied with micro-fog lubricators.
Combination Units
31Customer Service: 877.963.4966
Series 1 Drip Leg Automatic Drain
Series 1 Three-Way Shut-Off Valves
Desiccant Compressed Air Dryers
7 oz. 1 qt.
Cubic Foot ratings at 100 PSI inlet pressure.
• Compressed air dryers help to eliminate condensation at the point of use. A replaceable element filters outletair to help prevent desiccant dust migration downstream.
• Silica gel desiccant changes color from blue to pink when desiccant replacement is needed. Desiccant can bedried and reused by heating to 275°F, or replaced. 7 oz. bowl uses 1 gel packet; 1 qt. bowl uses 5 gel packets.
• An after filter should be placed downstream from the desiccant dryer to ensure solid contaminants such asdesiccant dust do not migrate downstream.
In-line or modular installation. Quick release bayonet bowl.7 oz: Nominal air drying capacity 750 cubic feet at 100 PSI and 77°F.
Maximum inlet pressure: 150 PSI. Maximum temperature: 175°F.transparent bowl with guard; .25 lb. capacity
1 qt: Moisture indicator on top of body.Nominal air drying capacity 6000 cubic feet at 100 PSI and 77°F.Maximum inlet pressure: 250 PSI. Maximum temperature: 175°F.metal bowl; 1.25 lb. capacity
• Shut-off valves, typically attached to the inlet end ofa combination unit, are manually operated, slidetype valves that open and close with a short one-inch movement of the slide.
• The valve slide can be locked in the closed positionwith a customer supplied padlock.
• The standard valve is a 3-way valve that exhaustsdownstream air in the closed position.
• Recommended pressure is 250 PSI.• For use with 72 and 73 series filters, regulators and
lubricators on pages 15-26.• Conforms to OSHA lockout regulation
Part #
T73E-2T73E-3T73E-4
Size
1/4"3/8"1/2"
Used in compressed air systems to automatically expel liquids from piping systems. Installed at low points inpiping and at end of pipe network, where water is likely to accumulate.
• Metal bowl• Drain is ported to 1/8" NPT• Inlet for metal bowl: 250 PSIG
Accessories
Part #
17-016-107
Size
1/2"
Part #
W74D-2A-MB7W74D-2A-MB32
Size
7 oz.1 qt.
SCFM
1020
Size
1/4"1/4"
32 Customer Service: 877.963.4966
Brass Hex Nipples
Steel Close Nipples
Do not use pipe nipples as hose inserts.
Part #
BCN12BCN25BCN37BCN50BCN75
BCN100
Size
1/8" x 1/8"1/4" x 1/4"3/8" x 3/8"1/2" x 1/2"3/4" x 3/4"
1" x 1"
Part #
CN100CN125CN150CN200
Size
1" x 1"1-1/4" x 1-1/4"1-1/2" x 1-1/2"
2" x 2"
Accessories
Filter AccessoriesPart #Description
4380-0204380-0304380-051
Liquid level lens kitLiquid level lens kitPyrex® sight glass kit
For
F73F72F74
Bowls and Bowl GuardsPart #Description
3646-513646-53
3646-544266-50RF4266-52RF
4425-50RF4425-51RF4325-51R4325-52R4203-51RF
4425-50RL4304-77R
4325-50R4326-01
Polycarbonate bowl w/ auto drainPolycarbonate bowl with manualdrainPolycarbonate bowl with drainTransparent bowl with manual drainTransparent bowl with semi-automatic drainTransparent bowl with manual drainTransparent bowl with auto drainTransparent bowl with manual drainTransparent bowl with auto drainMetal bowl with Pyrex® liquid levelIndicator and ¼ turn manual drainTransparent bowl with manual drainMetal bowl with Pyrex® liquid levelIndicator and ¼ turn manual drainTransparent bowl with manual drainBowl guard
For
F07F07
L07F72F72
F73F73F74, B74F74, B74L72
L73L74
L74F74, B74,L74
Filter ElementsPart #Description
3652-115311-015311-025311-035882-115882-125882-135925-035925-024438-014438-034338-044338-05
5 micron5 micron25 micron40 micron5 micron25 micron40 micron5 micron40 micron5 micron40 micron5 micron40 micron
For
F07F17
F18
F72
F73
F74
33Customer Service: 877.963.4966
Accessories
Regulator Replacement SpringsPart #Description
4232-024232-034432-014432-024332-014332-02
5-605-1505-60
5-1505-60
5-150
For
R72
R73
R74
Element ReplacementsPart #Description
4344-014344-024341-014385-700
Oil removal filterOil removal filterVapor removal filter5 silica gel refills, .25lb. each
For
F74CF74H F74VW74D
Mounting BracketsPart #Description
2962-895988-025226-975939-066212-506212-515095-1718-025-0035570-0418-001-96218-001-959
Plastic panel nutPanel nut (stainless steel)Metal panel nutMounting bracketMounting bracket kit for ¾" & 1"Mounting bracket kit for 1¼" & 1½"Mounting bracketMounting bracketMounting bracketMounting bracket kitMounting bracket kit w/panel nut
For
R07R22R17F07F17, L17F17, L17L07R07, B07R17R22R22
Lubricator AccessoriesPart #Description
18-011-0212325-10720-014272-992325-135301-554055-50
4055-51
5055-545605-504380-050
Quick fill capViton® sealBuna sealAcetal fill plugViton® sealAluminum fill plugSight feed dome
(Micro-fogging design)Sight feed dome
(Oil-fogging design)Sight feed domePyrex® sight feed domeLiquid level indicator repair kit
For
L17, L74L72L72L72L74L73, L74L72, L74
L72
L12L72, L74L74
Repair KitsPart #Description
5945-503407-02529-035578-025945-404381-5004381-6004381-700
Repair kitRepair kitRepair kitRepair kitRepair kitRepair kitRepair kitRepair kit
For
F18R07R11R17R18R72R73R74
Auto and Manual DrainsPart #Description
3000-102796-525379-RK4000-51R3000-10619-50
Auto drainManual drain assemblySemiautomatic drainAuto drainAuto drainManual drain
For
F17F17, L17F72F72, F73F74F72, F73,F74
34 Customer Service: 877.963.4966
Accessories
Use to panel mount regulators and filter/regulators.Series 72 nut is plastic; Series 73 and 74 nuts are zinc.
GaugesPart #Description
GC620GC230
0-160 PSI gauge0-160 PSI gauge
For
R72, B72R73, R74,B73, B74
Panel Nuts
Part #
4248-895191-884348-89
For
727374
Part #
5797-50
For
74
Service Life Indicator Conversion Kit forF74 Airline Filters and Oil Removal Filters
Allows addition of service life indicator in the field.
Part #
2117-01
For
73,74
Seal Wire
Install under sight feed dome on L73 and L74 lubricatorsto provide tamper resistant protection of the lubricatordrip rate setting.
Part #
4255-514455-514355-51
For
727374
Tamper Resistant Cover & Seal Wire
Install on the adjusting knob of regulators or filter/regulatorsto help prevent unauthorized adjustment to the pressuresetting. Cover can be locked in place with up to fourpadlocks.
O-Ring KitsPart #Description
5578-055771-024380-5004380-6004380-7004382-5004382-6004382-700
O-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kit
For
F17L17F72F73F74L72L73L74
35Customer Service: 877.963.4966
Wall Mounting BracketsFor use with 72, 73 & 74 Series products to secure to a wall,machine panel or other flat surface. For use instead ofquickclamps and pipe adapters for wall attachment ofcombination unit or individual filter, regulator or lubricator.Use close nipples to connect combination unit and then placein bracket.
Typical SetupCombination unit shown with clamps, end pipe adapters andwall mounting brackets.
Clamp Wall Mounting BracketsUse with the clamp to provide secure mounting to a wall,machine panel or other flat surface. 72 Series mounts with3/16" screws; 74 Series mounts with 7/32" screws.
ClampsFor use with all 72, 73 & 74 Series products to providemodular installation capability. Flanges on the products slideinto V grooves in the clamp. Two face-sealing O-rings in theclamp provide a positive seal when the clamp is closed andthe captive screw is tightened.
Clamp and Wall Mounting Brackets
Porting BlocksInstalls between two clamps to provide three additional 1/4"PTF outlets for auxiliary air.
Pipe AdaptersFor use with clamps to provide PTF threaded connections tothe system piping. Sold individually.
Manifold BlocksInstalls with clamps. 72 Series ports are threaded 3/8" PTF;73 & 74 Series ports are threaded 3/4" PTF to providemanifolding capability for up to three components.
Accessories
Part #
4216-504316-50
For
7273, 74
Part #
4228-014328-50
For
7273, 74
Part #
4214-524314-52
For
7273, 74
Part #
4213-894313-50
For
7273, 74
Part #
4214-514314-514384-5704384-770
For
72 Quickclamp73, 74 Quickclamp72 Service Kit (2 O-rings)73, 74 Service Kit (2 O-rings)
* For L74 with 1 quart reservoir
Part #
4224-504424-504324-504324-51*
For
72737474
Part #
4215-024215-034315-014315-024315-034315-04
727273, 7473, 7473, 7473, 74
Size
1/4"3/8"1/4"3/8"1/2"3/4"
For
Through its divisions and affiliated companies, Dixon is
recognized as the premier manufacturer and supplier of
hose fittings and accessories spanning a wide range of
industrial uses. Dixon’s reach includes products for fire
protection,food, dairy processing, beverage and brewery,
mobile tankers, mining, construction, chemical processing,
petroleum, oilfields, refining, nuclear and manufacturing.
800 High Street, Chestertown, MD 21620Customer Service: 800.355.1991Fax: 800.283.4966www.dixonvalve.com
Dixon Valve & Coupling Company
© 2006 DVCC Printed in the USA NFRL406-1P5M