norgren filters, regulators and lubricators - bay … norgren.pdf · 2 customer service:...

NorgrenFilters, Regulators and Lubricators

2 Customer Service: 877.963.4966

Dixon - Norgren Cross ReferenceCross-Reference

RegulatorsDixon

R07-100RR07-100RGR07-200RR07-200RGR11-013RGR11-037RGR11-061RGR17-600RR17-600RGR17-800RR17-800RGR17-A00RR17-A00RGR17-B00RR17-B00RGR18-C05RR18-C05RGR22-405RR43-201RGR43-301RGR43-406RGR72G-2RR72G-2RGR72G-3RR72G-3RGR72M-2RGR72M-3RGR72M-2RR72M-3RR73G-2RR73G-2RGR73G-3RR73G-3RGR73G-4RR73G-4RGR74G-3RR74G-3RGR74G-4RR74G-4RGR74G-6RR74G-6RGR83-200RR91-221RG

R07-100-RNKAR07-100-RGKAR07-200-RNKAR07-200-RGKA11-002-01311-002-03711-002-061R17-600-RNLAR17-600-RGLAR17-800-RNLAR17-800-RGLAR17-A00-RNLAR17-A00-RGLAR17-B00-RNLAR17-B00-RGLAR18-C05-RNLAR18-C05-RGLAR22-405-RNMAR43-201-NGLAR43-301-NGLAR43-406-NGLAR72G-2AK-RMNR72G-2AK-RMGR72G-3AK-RMNR72G-3AK-RMGR72M-2AK-RMGR72M-3AK-RMGR72M-2AK-RMNR72M-3AK-RMNR73G-2AK-RMNR73G-2AK-RMGR73G-3AK-RMNR73G-3AK-RMGR73G-4AK-RMNR73G-4AK-RMGR74G-3AK-RMNR74G-3AK-RMGR74G-4AK-RMNR74G-4AK-RMGR74G-6AK-RMNR74G-6AK-RMGR83-200-RNLAR91W-2AK-NGLN

NorgrenDixon Norgren

F07-100-A1TAF07-100-M1TAF07-200-A1TAF07-200-M1TAF17-600-A3DAF17-600-M3DAF17-800-A3DAF17-800-M3DAF17-A00-A3DAF17-A00-M3DAF17-B00-A3DAF17-B00-M3DAF18-C00-A3DAF18-C00-M3DAF22-405-A2DAF72G2ANST3F72G2ANSD3F72G2ANQT3F72G2ANQD3F72G3ANST3F72G3ANSD3F72G3ANQT3F72G3ANQD3F73G2ANAT3F73G2ANAD3F73G2ANQT3F73G2ANQD3F73G3ANAT3F73G3ANAD3F73G3ANQT3F73G3ANQD3F73G4ANAT3F73G4ANAD3F73G4ANQT3F73G4ANQD3F74C-3AD-AD0F74C-4AD-AD0F74G-3AN-AP3F74G-3AN-AD3F74G-3AN-QP3F74G-3AN-QD3F74G-4AN-AP3F74G-4AN-AD3F74G-4AN-QP3F74G-4AN-QD3F74G-6AN-AP3F74G-6AN-AD3F74G-6AN-QP3F74G-6AN-QD3F74H-4AD-AD0F74H-6AD-AD0F74V-3AN-EMAF74V-4AN-EMAF74V-6AN-EMA

Filters

F07-100AF07-100MF07-200AF07-200MF17-600AF17-600MF17-800AF17-800MF17-A00AF17-A00MF17-B00AF17-B00MF18-C00AF18-C00MF22-405A-MBF72G-2AF72G-2A-MBF72G-2MF72G-2M-MBF72G-3AF72G-3A-MBF72G-3MF72G-3M-MBF73G-2AF73G-2A-MBF73G-2MF73G-2M-MBF73G-3AF73G-3A-MBF73G-3MF73G-3M-MBF73G-4AF73G-4A-MBF73G-4MF73G-4M-MBF74C-3A-MBF74C-4A-MBF74G-3AF74G-3A-MBF74G-3MF74G-3M-MBF74G-4AF74G-4A-MBF74G-4MF74G-4M-MBF74G-6AF74G-6A-MBF74G-6MF74G-6M-MBF74H-4A-MBF74H-6A-MBF74V-3A-MBF74V-4A-MBF74V-6A-MB

B07-102AGB07-102MGB07-202AGB07-202MGB12-218AGB12-218MGB72G-2AGB72G-2AG-MBB72G-2MGB72G-2MG-MBB72G-3AGB72G-3AG-MBB72G-3MGB72G-3MG-MBB73G-2AGB73G-2AG-MBB73G-2MGB73G-2MG-MBB73G-3AGB73G-3AG-MBB73G-3MGB73G-3MG-MBB73G-4AGB73G-4AG-MBB73G-4MGB73G-4MG-MBB74G-3AGB74G-3AG-MBB74G-3MGB74G-3MG-MBB74G-4AGB74G-4AG-MBB74G-4MGB74G-4MG-MBB74G-6AGB74G-6AG-MBB74G-6MGB74G-6MG-MB

Dixon Norgren

B07-102-A1KAB07-102-M1KAB07-202-A1KAB07-202-M1KAB12-218-A3LAB12-218-M3LAB72G-2AK-ST3-RMGB72G-2AK-SD3-RMGB72G-2AK-QT3-RMGB72G-2AK-QD3-RMGB72G-3AK-ST3-RMGB72G-3AK-SD3-RMGB72G-3AK-QT3-RMGB72G-3AK-QD3-RMGB73G-2AK-AT3-RMGB73G-2AK-AD3-RMGB73G-2AK-QT3-RMGB73G-2AK-QD3-RMGB73G-3AK-AT3-RMGB73G-3AK-AD3-RMGB73G-3AK-QT3-RMGB73G-3AK-QD3-RMGB73G-4AK-AT3-RMGB73G-4AK-AD3-RMGB73G-4AK-QT3-RMGB73G-4AK-QD3-RMGB74G-3AK-AP3-RMGB74G-3AK-AD3-RMGB74G-3AK-QP3-RMGB74G-3AK-QD3-RMGB74G-4AK-AP3-RMGB74G-4AK-AD3-RMGB74G-4AK-QP3-RMGB74G-4AK-QD3-RMGB74G-6AK-AP3-RMGB74G-6AK-AD3-RMGB74G-6AK-QP3-RMGB74G-6AK-QD3-RMG

Filter / Regulators

SCFM ratings are at 100 PSI inlet pressureLine art measurements given in inches (mm).

3Customer Service: 877.963.4966

L07-100AL07-200AL17-600AL17-800AL17-A00AL17-B00AL17-600APXL17-800APXL17-A00APXL17-B00APXL72M-2L72M-2MBL72M-3L72M-3MBL72M-2MBPXL72M-3MBPXL73M-2L73M-2MBL73M-3L73M-3MBL73M-4L73M-4MBL73M-2MBPXL73M-3MBPXL73M-4MBPXL74M-3L74M-3MBL74M-4L74M-4MBL74M-6L74M-6MBL74M-3MBPXL74M-4MBPXL74M-6MBPX

L07-100-MPAAL07-200-MPAAL17-600-MPDAL17-800-MPDAL17-A00-MPDAL17-B00-MPDAL17-600MP-DA8NL17-800MP-A8NL17-A00-MPDA8NL17-B00-MPDA8NL72M2AP-QTNL72M2AP-QDNL72M3AP-QTNL72M3AP-QDNL72M-2AP-DRPL72M-3AP-DRPL73M2APQTNL73M2APQDNL73M3APQTNL73M3APQDNL73M4APQTNL73M4APQDNL73M-2AP-DRPL73M-3AP-DRPL73M-4AP-DRPL74M-3AP-QPNL74M-3AP-QDNL74M-4AP-QPNL74M-4AP-QDNL74M-6AP-QPNL74M-6AP-QDNL74M-3AP-DRPL74M-4AP-DRPL74M-6AP-DRP

Lubricators - Micro-FogDixon Norgren

Lubricators - Oil-Fog

L17-600-OPDAL17-800-OPDAL17-A00-OPDAL17-B00-OPDAL22-405-OPDAL72C-2AP-QTNL72C-2AP-QDNL72C-3AP-QTNL72C-3AP-QDNL73C-2AP-QTNL73C-2AP-QDNL73C-3AP-QTNL73C-3AP-QDNL73C-4AP-QTNL73C-4AP-QDNL74C-3AP-QPNL74C-3AP-QDNL74C-4AP-QPNL74C-4AP-QDNL74C-6AP-QPNL74C-6AP-QDN

L17-600DL17-800DL17-A00DL17-B00DL22-405MBL72C-2L72C-2MBL72C-3L72C-3MBL73C-2L73C-2MBL73C-3L73C-3MBL73C-4L73C-4MBL74C-3L74C-3MBL74C-4L74C-4MBL74C-6L74C-6MB

Dixon Norgren

Combination Units

E72-2AE72-2A-MBE72-2ME72-2M-MBE72-3AE72-3A-MBE72-3ME72-3M-MBE73-2AE73-2A-MBE73-2ME73-2M-MBE73-3AE73-3A-MBE73-3ME73-3M-MBE73-4AE73-4A-MBE73-4ME73-4M-MBE74-3AE74-3A-MBE74-3ME74-3M-MBE74-4AE74-4A-MBE74-4ME74-4M-MBE74-6AE74-6A-MBE74-6ME74-6M-MBP1A-100AP1A-100MP1A-200AP1A-200MP8A-660AP8A-660MP8A-860AP8A-860MPTH-100AGPTH-200AG

C72A-2AK-ST3-RMG-QTBC72A-2AK-SD3-RMG-QDBC72A-2AK-QT3-RMG-QTBC72A-2AK-QD3-RMG-QDBC72A-3AK-ST3-RMG-QTBC72A-3AK-SD3-RMG-QDBC72A-3AK-QT3-RMG-QTBC72A-3AK-QD3-RMG-QDBC73A-2AK-AT3-RMG-QTBC73A-2AK-AD3-RMG-QDBC73A-2AK-QT3-RMG-QTBC73A-2AK-QD3-RMG-QDBC73A-3AK-AT3-RMG-QTBC73A-3AK-AD3-RMG-QDBC73A-3AK-QT3-RMG-QTBC73A-3AK-QD3-RMG-QDBC73A-4AK-AT3-RMG-QTBC73A-4AK-AD3-RMG-QDBC73A-4AK-QT3-RMG-QTBC73A-4AK-QD3-RMG-QDBC74A-3AK-AT3-RMG-QPBC74A-3AK-AD3-RMG-QDBC74A-3AK-QT3-RMG-QPBC74A-3AK-QD3-RMG-QDBC74A-4AK-AT3-RMG-QPBC74A-4AK-AD3-RMG-QDBC74A-4AK-QT3-RMG-QPBC74A-4AK-QD3-RMG-QDBC74A-6AK-AT3-RMG-QPBC74A-6AK-AD3-RMG-QDBC74A-6AK-QT3-RMG-QPBC74A-6AK-QD3-RMG-QDBP1A-100-A1AAP1A-100-M1AAP1A-200-A1AAP1A-200-M1AAP8A-660-A3DAP8A-660-M3DAP8A-860-A3DAP8A-860-M3DAPTH-100-A1AAPTH-200-A1AA

Dixon Norgren

Dixon - Norgren Cross Reference

Dixon's couplings and retention devices are designed to work safely for their intended use. The selection of theproper hose, coupling, and retention devices; and the proper application of the coupling to the hose are of utmostimportance. Users must consider the size, temperature, application, media, pressure, and hose and couplingmanufacturer's recommendations when selecting the proper hose assembly components. Dixon recommends that allhose assemblies be tested in accordance with the Rubber Manufacturers Association's recommendations and beinspected regularly (before each use), to ensure that they are not damaged or have become loose.

Where safety devices are integral to the coupling, they must be working and utilized. The use of supplementarysafety devices, such as safety clips and King Cable safety cables, are recommended. If any problem is detected,couplings must be removed from service immediately.

Dixon is always available for consultation concerning the couplings and accessories we sell. We will suggest theappropriate fittings, test those applications when necessary, and train distributors in assembly procedures. We stronglyrecommend that distributors and end users make use of these services. Dixon can be contacted at 877.963.4966.

Dryers

W74D-2A-MB32W74D-2A-MB7

W74D-2AD-NMNW74D-2AN-NPN

Dixon Norgren

Safety Statement

Cross-Reference


Three main types of filters exist: The general purpose filter for water and particles, the coalescing oil removal filter foroil aerosols and the activated carbon filter for the removal of oil vapors. The general purpose filter is used for mostfilter applications and is available from 1/8" to 2" pipe sizes. Uses are main headers, branch lines, tools, cylinders,valves and valve circuits, air agitators etc. Oil removal filters are used where very clean, oil-free air is required, such asfor the supply to instrumentation, air gauging equipment and air bearings. Activated carbon filters are used for systemswhere the oil vapors in the air are not acceptable; such as instrumentation and paint spraying.

How Do General Purpose Filters Work?The dirt and moisture-laden air enters the inlet port and

is directed into the louvres which centrifugally separatethe entrapped liquids and dirt which fall to the bottom ofthe bowl. Near the bottom of the bowl a baffle creates aquiet zone, preventing the turbulent air re-entrapping thecontaminants. The air, now free of water droplets andlarge dirt particles, passes through the filter elementwhich removes small dirt particles.

How Do Oil Removal Filters Work?The fine oil mist is coalesced (merged) as it passes

through the fine fibrous filtration media. These oil dropletsare collected in the outer sock and then drop from theelement to the bottom of the bowl for easy removal.

Where a coalescing filter is being used for oil removal,the element quickly becomes saturated which is clearlyvisible on the outer sock. This is the normal operatingcondition for oil removal.

How do Vapor Removal Filters Work?Carbon filters are used to remove oil vapors (odors).

The activated carbon has a porous structure whichresults in a large surface area. The oil vapors are at-tracted and adhere to this surface. There is usually asmall sintered medium included in an activated carbonelement to prevent the carbon particles from migratingdownstream. The carbon filter reduces the maximum oilcontent of air leaving the filter to 0.003 ppm at 70°F, forexample to ISO 8573 class 1.7.1.

Why use a Pre-Filter?A pre-filter is simply a general purpose filter placed

upstream of a higher grade filter to remove the majority ofthe water and larger particle contaminants and thuslengthen the life of the higher grade filter element. A 5micron pre-filter should always be used ahead of an oil orvapor removal filter.

FiltersGeneral Overview

Coalescing Filter

Bowl

Element

Outer sock

Metal bowl sight glass

Collected condensate

Body

Serviceindicator

Drain

Metal bowlsight glass

General Purpose Filter

Element

Centre post


Body

Service indicator(optional)

Drain

Louvre

Bowl

Baffle


Excessive pressure drop

Dirt passing through filter

Water passing through filter

Crazing of Polycarbonatebowlor milky appearance

Water beyond the filter

Micron rating of element too small

Filter element blocked

Flow requirement greater thanfilter capacity.

Element seals missing ordefective (N.B. seals notrequired on some units).

Damaged element

Water level in bowl abovebaffle

Flow capacity of filterexceeded

Bowl has been cleaned withincompatible fluid

Bowl is being used in an areacontaining fumes or vaporsincompatible with polycarbonate.

Compressor oil vapor may becausing problem

Air intake to compressor maycontain fumes or vapor incompatiblewith polycarbonate.

Inlet air has a high temperatureand as it cools downstream,moisture condenses to water.

Use larger micron element size forapplication.

1.Clean element (not coalescing element).2.Replace with new element.

Use larger filter

1.Replace seal2.Tighten element

Replace element

Drain water

Maintain flow within capacityof filter or change to filtercapable of handling desired flows.

Replace bowl(Clean only with clean warm water and soap.)

Replace bowlEliminate source of problem orconvert from plastic to metal bowls.



Fit dryer, pre-cool air or fitfilter immediately prior to application.

Simple Filter Troubleshooting

Malfunction Possible Cause Remedy

Filter Information


Regulators ideally provide a constant outlet pressure independent of variations in inlet pressure or flow.Regulators are typically used to:

a) reduce pressure to the level required for downstream equipmentb) limit the force of cylindersc) minimize pressure variation at the point of use

The range of different regulators and options within each type are wide and varied, but each can broadly be put intoone of 3 categories.

• general purpose regulators• pilot operated regulators• application specific regulators

General Purpose Regulators:General purpose regulators are designed to give the

maximum flow capacity (for their size) while maintaining,to a reasonable accuracy, the outlet pressure to the setlevel. They are used to control pressures in compressedair line installations to different parts of machines or topneumatic tools and motors. General purpose regulatorsare available in relieving or non-relieving types. Relievingregulators can be adjusted from a high pressure to a lowpressure. Even in a dead end situation relieving regulatorswill allow the excess downstream pressure to be ex-hausted. This causes a loud hissing sound which isperfectly normal. Non-relieving regulators when similarlyadjusted will not allow the downstream pressure to es-cape. The trapped air will need to be released in someother way, for example by operating a downstream valve.General purpose regulators have a control spring whichacts on a diaphragm to regulate the air pressure. Therating of this control spring determines the adjustmentrange of the regulator. The outlet pressure setting isobtained by turning the knob (or T handle) clockwise toincrease pressure, counter clockwise to decrease pres-sure.

RegulatorsGeneral Overview

General Purpose Regulator

Diaphragm

Control spring

Valve pin

Adjusting screw

Knob

Valve

Spring rest

Relief seat

Adjusting nut

Valve spring

Bottom plug


Regulator creep (increase insecondary pressure due toleak from primary)

Won’t relieve secondarypressure

Won’t reach desiredpressure

Excessive leak from reliefhole

Regulator chatter

Regulator difficult to adjust

Dirty or cut valve elastomers.Nick in valve seat.

Non-relieving diaphragm assembly.

Regulating spring with low springrate.

Damaged relief seat. Ruptureddiaphragm.

Leakage past valve causingsecondary to increase somewhatand open relief seat.

A resonant condition is generallyonly encountered under a certainset of conditions of flow and pres-sure and then only in some applica-tions in which regulator couples withother system components.

Adjusting screw or knob lockingdevice in locked position.

Contaminants in adjusting screwthreads.

Replace or clean valve. If body orvalve seat is damaged it can bereplaced on some models. Onothers replacement of completeregulator is required.

If this feature is required, replacewith relieving type diaphragmassembly.

Use regulating spring with springrate designed to cover desired range.

Replace diaphragm assembly

Replace or clean valve

Replace spring with a higher pressure rangespring.

Replace with a piston type regulatorsince they have less tendency tochatter.

Pull to unlock knob and adjust; pushknob to lock.

Threaded adjusting screws: loosenlock nut, remove adjusting screw,clean thread and lubricate.

Place some lubricant on tip of screw.

Simple Regulator Troubleshooting

Problem Problem cause Remedy

Regulator Information


Filter/regulators combine the features of a filter and regulator with a single compact body. Air passes through the filtersection first removing water and particle contaminants, and is then regulated by the top regulator section.

See individual filter and regulator sections for details.

Performance characteristics:The regulator section of the filter/regulator determines

the flow and regulation characteristics of the unit.Flow is therefore measured in terms of

pressure drop from set pressure (see regulators) and notflow versus pressure drop as in a filter.

Regulation characteristics are determined inthe same way as regulators.

Filter/RegulatorGeneral Overview

General Purpose Filter/Regulator

Center post

Element

Metal bowl sight glass


Bowl

Baffle

Drain

Diaphragm

Control spring

Valve pin

Adjusting screw

Knob

Valve

Spring rest

Relief seat

Adjusting nut

Valve spring


Information

Dixon offers two main types of lubricators: Micro-Fog and Oil-Fog.These units are mounted directly into the pipe and add small amounts of oil to the air flowing through them.

Micro-Fog Lubricators:The oil droplets seen in the sight dome are atomized

and collected in the area above the oil in the bowl. Thesmaller lighter particles are drawn into the air flow andpass downstream. As a result typically only 10% of the oilseen as drops in the sight dome is passed downstream.The remainder falls back into the oil reservoir. Conse-quently, drip rate settings are somewhat higher than theiroil-fog equivalent. This makes setting much easier,particularly in low flow applications. The fine micro-fog oilparticles can travel long distances through complex pipework making micro-fog lubricators suitable for multiplevalve and cylinder circuits.

Oil Fog-Lubricators:All the oil droplets seen in the sight dome are added

directly into the air flow. This results in relatively large oildroplets passing downstream, suitable for heavy lubrica-tion applications, for example single cylinders and tools.Most competitive in line lubricators are of the oil-fog type.

LubricatorGeneral Overview

Micro-Fog Lubricator

Sight dome

Bowl

General assembly

Syphon tube

Oil

Body

Drain (optional)


Flow sensor

Oil-Fog Lubricator

Bowl

Check valve

Syphon tube

Oil

Body

Sight dome

Drain (optional)


Flow sensor


Micro-Fog:• Small oil particles; less than 2 micron• Only 10% of ‘drip rate’ is delivered downstream as active lubricant (remainder is returned to main oil reservoir)• High drip rates make drip setting easier in low flow applications• Can be mounted above or below the point of application• Cannot be filled without shutting off upstream air (unless a quick fill cap or remote fill device is used)• For use with lengthy air lines, multiple valve and cylinder circuits• Has a flow sensor to provide an almost constant oil output density for varying flows

Oil-Fog:• Large oil particles not as fine as micro-fog• All oil drips seen in sight domes are delivered downstream.• For applications over short distances• Should be mounted at same level or higher than device being lubricated• Standard bowls can be filled under pressure (not on rapid cycle units)• Suitable for heavy lubrication applications, for example single large cylinders and tools• Has a flow sensor which provides constant oil output density for varying flows

Can Oil-Fog and Micro-Fog Units be Converted?Generally not, simply changing a green (oil-fog) sight dome for a red (micro-fog) sight dome does not change the

function. Some lubricators are designed around a cartridge insert. In this case it may be possible to swap the cartridgeand sight domes to change the function.

What Are The Differences Between Micro-Fog and Oil-Fog?

Setting Lubricator Drip RatesWhat is the Correct Drip Rate Setting?

The drip rate will depend on the application, the amount of lubrication required, the flow through the lubricator and thelubricator type. In micro-fog lubricators only 10% of the droplets in the sight dome are carried downstream. The driprate in micro-fog lubricators therefore tends to be much higher. The following table can be used to estimate drip rate forrequired flow. This is very much a rule of thumb. In practice it is necessary to fine tune the oil drip rate in each applica-tion.

Can the Drip Rate be Shut Off?In lubricators with needle valve type sight dome, yes. Some Norgren sight domes use a felt pad which is soaked in oil

at the point where the drops are formed. With this type of sight dome the oil droplets cease once the felt pad dries out.With the new style dome (L72/73/74 and L07) complete shut off is not possible. Minimum adjustment for the drip rate isaround 1 drop per minute.

10 (5)20 (10)30 (15)40 (20)50 (25)60 (30)

24681012

20406080100120

Typical Drip Rateper minutemicro-fog

Typical Drip Rateper minute

oil-fog

Approximateflow

scfm (dm3/s)


1 pint 1 gallon

Lubricator Information

No Drip Rate

Oil Foaming

Oil Emulsified

Drip Rate changes aftersetting

Oil adjustment knob fully clockwise

Low oil level

Airflow through lubricator too low

Blocked oil filter screen

Air leaks

Over aeration

Water in lubricator

Fade

Readjust knob.

Check oil level.

Use smaller size lubricator.

Remove bowl and sight feedadjustment dome and clear syphontube.

Remove sight feed adjustment domeand clean or replace screen locatedin dome assembly.

Check bowl, filler plug and sightdome seals. Tighten if necessary.

Check bowl seals for slight leaks.

Fit filter immediately upstream.

Readjust drip rate.

Simple Lubricator Troubleshooting

Problem Possible cause Remedy

Micro-Fog:The standard micro-fog unit can only be filled without isolating the upstream pressure if a remote fill or quick fill nipple

accessory is fitted. To remove the fill plug of a micro-fog lubricator while under pressure can be dangerous. If in doubtshut off the upstream air!

Oil-Fog:The standard oil-fog lubricators can be filled under pressure, for example without switching off the upstream air.

When a fill plug is removed a check valve in the lubricator body isolates the inlet pressure from the bowl and thereservoir will depressurize. The lubricator can then be filled with oil. When the fill plug is replaced, the reservoir willrepressurize.

Filling Methods

Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which willreadily break up into a mist, i.e., Mobil DTE light or comparable oil. Do not use anysynthetic oil or oils containing additives or solvents.

Avoid Lubricator ProblemsUse an Approved Air Tool Oil

Dixon offers a specially formulated high grade lubricant that prolongs the service life of airtools, cylinders and accessories while permitting maximum performance. It is available inone pint (DAT016), and one gallon (DAT128) size containers.See the current Dixon Price List for more information.


Carded Mini'sDixon offers the Series I line of Miniature Filters, Filter/Regulators, Regulators and Lubricators in prepack-aged clear plastic units suitable for hanging on store peg racks or displays. The primary features of eachunit are printed on the packaging. Each package contains 1 Miniature Filter, Filter/Regulator, Regulator orLubricator and instruction sheet.

Carded Mini Filter/Regulators

• 1 oz. reservoir• 5-100 PSIG adjustable range• Relieving type diaphragm• Transparent bowl (guard not available)• 5-micron filter element• Push to lock adjusting knob• Supplied with a GC620 gauge

Carded Mini Regulators

• Relieving Type• Adjustable 5-100 PSIG• Regulation at flows up to 22 scfm at 100 PSIG• Inlet pressure 250 PSI maximum• Supplied with a GC620 gauge

• 1 oz. reservoir• Transparent bowls• 5-micron element standard• Inlet pressure 150 PSI maximum

Carded Mini Lubricators

• Transparent bowl• 1 oz. reservoir with drain standard• Inlet pressure 150 PSI maximum

Carded Mini Filters

Part #SizePart #

F07-200AC

Size

1/4" 1/4" F07-200MC

Manual DrainAutomatic Drain

SCFM

21

SCFM

21

Part #

R07-200RGC

Size

1/4"

with Gauge

SCFM

20

Part #SizePart #

B07-202AGC

Size

1/4" 1/4" B07-202MGC


SCFM

21

SCFM

21

Part #

L07-200AC

Size

1/4"

with Gauge

SCFM

14


Mini Filters

Miniatures

Mini Regulators

Mini Filter/Regulators

Mini Lubricators

• Transparent bowls• 5-micron element standard

• 1 oz. reservoir• Inlet pressure 150 PSI maximum

Part #SizePart #

F07-100AF07-200A

Size

1/8"1/4"

1/8"1/4"

F07-100MF07-200M


SCFM

1821

SCFM

1821

• Relieving Type• Supplied with a GC620 gauge

• 5-100 PSIG adjustable range• Inlet pressure 300 PSI maximum

Part #SizePart #

R07-100RGR07-200RG

Size

1/8"1/4"

1/8"1/4"

R07-100RR07-200R

without Gaugewith Gauge

SCFM

2222

SCFM

2222

• 5-100 PSIG adjustable range• Relieving type diaphragm• Transparent bowl

(guard not available)• 5-micron filter element

• Push to lock adjusting knob• 1 oz. reservoir• Inlet pressure 150 PSI maximum• Supplied with a GC620 gauge

Part #SizePart #

B07-102AGB07-202AG

Size

1/8"1/4"

1/8"1/4"

B07-102MGB07-202MG


SCFM

1821

SCFM

1821

• Transparent bowl• 1 oz. reservoir with drain standard• Inlet pressure 150 PSI maximum

Part #

L07-100AL07-200A

Size

1/8"1/4"

SCFM

1414

Miniature Non-Repairable General Purpose Regulators

• Relieving piston design allowsreduction of downstreampressure when the systemis dead-ended.

• Left to right flow• Supplied with a GC620 gauge

• 5 to 125 PSIG outlet pressureadjustment range

• Compact design and lightweightconstruction

• Wrench flats for easy installation

Part #SizePart #

R46-200RG

Size

1/4" 1/4" R46-200R


SCFM

13

SCFM

13

1.97

(50

)0.

33 (

8)

1.63 (41)

1.65 (42) Dia.


(Filter, Regulator, Lubricator)Mini Combination Units

Micro Mate Combination Units

• 5-125 PSIG adjustable range• 1 oz. reservoir• Inlet pressure 150 PSI maximum• Supplied with a GC620 gauge

• Automatic drain on filter• Requires only 2 pipe

connections.• 5-125 PSIG adjustable range• Inlet pressure 150 PSI maximum

Part #

PTH-100AGPTH-200AG

Size

1/8"1/4"

1010

Part #SizePart #

P1A-100AP1A-200A

Size

1/8"1/4"

1/8"1/4"

P1A-100MP1A-200M


SCFM

1010

SCFM

1010


Dixon FRL's are rugged and long lasting units for compressed air service, or water or gas service if indicated.Units may be purchased assembled or individually. Please consult Dixon for special service on these and allhose fittings.

Filters

• 2 oz. reservoir• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40-Micron filter element standard• Particle removal per ISO 8573-1, Class 5 and Class 3• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI maximum


1/4" Basic - Transparent Bowl

Part #SizePart #

F72G-2AF72G-3A

Size

1/4"3/8"

1/4"3/8"

F72G-2MF72G-3M

Manual DrainSemi-automatic Drain

SCFM

5555

SCFM

5555

1/4" Basic - Metal Bowl with Sight Glass

Part #SizePart #

F72G-2A-MBF72G-3A-MB

Size

1/4"3/8"

1/4"3/8"

F72G-2M-MBF72G-3M-MB


SCFM

5555

SCFM

5555


Part #SizePart #

F73G-2AF73G-3AF73G-4A

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

F73G-2MF73G-3MF73G-4M


SCFM

536569

SCFM

536569


Part #SizePart #

F73G-2A-MBF73G-3A-MBF73G-4A-MB

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

F73G-2M-MBF73G-3M-MBF73G-4M-MB


SCFM

536569

SCFM

536569

Airline Filters


Filters


• 1 qt. reservoir• General purpose with low pressure drop and excellent

water removal characteristics.• Metal bowl with sight glass• 50-Micron element standard• Inlet pressure is 250 PSI maximum

• 2 gal. metal bowl with sight glass• 50-micron element standard• Inlet pressure is 250 PSI maximum

1/2" Basic - Transparent Bowl with Guard

Part #SizePart #

F74G-3AF74G-4AF74G-6A

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

F74G-3MF74G-4MF74G-6M


SCFM

112140140

SCFM

112140140


Part #SizePart #

F74G-3A-MBF74G-4A-MBF74G-6A-MB

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

F74G-3M-MBF74G-4M-MBF74G-6M-MB


SCFM

112140140

SCFM

112140140

1" Basic - Metal Bowl with Sight Glass

Part #SizePart #

F17-600AF17-800AF17-A00AF17-B00A

Size

3/4"1"

1-1/4"1-1/2"

3/4"1"

1-1/4"1-1/2"

F17-600MF17-800MF17-A00MF17-B00M


SCFM

325425425425

SCFM

325425425425


Part #SizePart #

F18-C00A

Size

2" 2" F18-C00M


SCFM

1400

SCFM

1400

Airline Filters


Filters

Oil Vapor Removal Filters

• In-line or modular installation• Quick-release bayonet metal bowl• Prismatic liquid level indicator• F74C and F74H provide Air Quality Class 2 Hydrocarbon and Class 1 Particulate Removal per ISO 8573-1• Element removes particles down to 0.01mm. Maximum remaining oil content of air leaving the filter is 0.01 ppm

at 70°F (21°C) with an inlet concentration of 8 ppm.• Service life indicator turns from green to red when element needs to be replaced.

3535

7075

SCFMSaturated Element

SCFMDry Element

1/2" Basic, Standard Flow - Metal Bowl

Part #

F74C-3A-MBF74C-4A-MB

Size

3/8"1/2"

Automatic Drain

6060

100120

SCFMSaturated Element

SCFMDry Element

1/2" Basic, High Flow - Metal Bowl

Part #

F74H-4A-MBF74H-6A-MB

Size

1/2"3/4"

Automatic Drain

Oil Removal (coalescing) Filters

• In-line or modular installation• Quick-release bayonet metal bowl• Activated carbon cartridge filter element absorbs oil vapors and

removes most hydrocarbon odors• Filter and element designs optimizes air velocity and contact time

to reduce oil content of air leaving the filter to 0.003 ppm at 70°F (21°C).• Long service life of carbon cartridge element• Minimum service life of 400 hours can be expected if the vapor removal filter is

protected upstream by an oil removal (coalescing) filter and if the filtrationtemperature is in the region of 70° to 80°F (21° to 26°C). Above this range, oil vapor content ofcompressed air increases substantially and element service life is reduced.

• F74C and F74V combinations provide Air Quality Class 1 Particulate Removalper ISO 8573-1, Class 1.-.1

For maximum service life install a general purpose filter upstream of the oil removal filter.

For maximum service life install a general purpose filter upstream of the oil removal filter.

1/2" Basic - Metal Bowl

Part #

F74V-3A-MBF74V-4A-MBF74V-6A-MB

Size

3/8"1/2"3/4"

SCFM

212121


• Two 1/4" high flow capacityfull-flow gauge ports

• Relieving type

• Adjustable 5-125 PSI• Inlet pressure 300 PSI maximum• Supplied with a GC230 gauge

• Two 1/4" high flow capacityfull-flow gauge ports

• Relieving type


• In-line or modular installation• Two 1/4" full-flow gauge ports• Relieving type






1/4" Basic

Part #SizePart #

R72G-2RGR72G-3RG

Size

1/4"3/8"

1/4"3/8"

R72G-2RR72G-3R


SCFM

7070

SCFM

7070

3/8" Basic

Part #SizePart #

R73G-2RGR73G-3RGR73G-4RG

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

R73G-2RR73G-3RR73G-4R


SCFM

91144144

SCFM

91144144

1/2" Basic

Part #SizePart #

R74G-3RGR74G-4RGR74G-6RG

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

R74G-3RR74G-4RR74G-6R


SCFM

208220220

SCFM

208220220

For 0-60 PSI range R72, R73 or R74 unit, add a L to the end of the part number.

1" Basic

Part #SizePart #

R17-600RGR17-800RGR17-A00RGR17-B00RG

Size

3/4"1"

1 1/4"1 1/2"

3/4"1"

1 1/4"1 1/2"

R17-600RR17-800RR17-A00RR17-B00R


SCFM

440480400440

SCFM

440480400440

2" Basic

Part #SizePart #

R18-C05RG

Size

2" 2" R18-C05R


SCFM

2000

SCFM

2000

Regulators


1.97

(50

)0.

33 (

8)

1.63 (41)

1.65 (42) Dia.

Cylinder Gas RegulatorUL listed for service with Carbon Dioxide, water, pumped air, Nitrogen, Argon, Helium, Krypton, Neon and Xenon.Not to be used with flammable gases.

Manifold RegulatorsManifold up to six regulators on a single air supply. Design allows in-line installation with hex nipple or modularinstallation with 72 Series accessories (see pages 34-35).

General RegulatorsFloating valve pin provides positive seating and dependibility. Large diaphragm provides quick response to flowdemands and line pressure changes. Balanced valve reduces inlet pressure variations on oulet pressure.

• T-handle adjustmentstandard

• Adjustable 5-125 PSI• Inlet pressure 400 PSI

maximum• Supplied with a GC620 gauge


• Relieving type• Two ports for high pressure

and two ports for service.• Adjustable 5-125 PSI• Inlet pressure 3000 PSI

maximum

Regulators

1/4" Basic

Part #SizePart #

R72M-2RGR72M-3RG

Size

1/4"3/8"

1/4"3/8"

R72M-2RR72M-3R


SCFM

8383

SCFM

8383

with Gauge

Part #R11-013RGR11-037RGR11-061RG

Size

1/4"3/8"1/2"

SCFM

110110260

without Gauge

Part #R83-200R

Size

1/4"

SCFM

10

Miniature Non-Repairable General Purpose Regulators

• Relieving piston design allowsreduction of downstreampressure when the systemis dead-ended.

• Left to right flow• Supplied with a GC620 gauge

• 5 to 125 PSIG outlet pressureadjustment range

• Compact design and lightweightconstruction

• Wrench flats for easy installation

Part #SizePart #

R46-200RG

Size

1/4" 1/4" R46-200R


SCFM

13

SCFM

13


9.50

(24

1)

5.00 (127)

1.62

(41

)

Miniature Water Regulator

Used in water systems to reduce and maintain pressure at a nearly constant level despite changes in the inletpressure and changes in downstream flow requirements. Brass body and Aluminum bonnet.

Designed for use with deionized water and potable water systems. Plastic and metals in contact with fluid areapproved by the National Sanitation Foundation (NSF) or the Food and Drug Administration (FDA) for use inpotable water systems. Elastomers are food grade.

Water Regulators

• T-handle adjustment standard• Non-relieving type• Gauge port is full-flow and can

be used as an outlet port• Adjustable 5-125 PSI• Inlet pressure 400 PSI

maximum• Supplied with a GC230 gauge

• Non-relieving type• Supplied with a GC620 gauge

with Gauge

Part #R43-201RGR43-301RGR43-406RG

Size

1/4"3/8"1/2"

GPM

5510

with Gauge

Part #R91-221RG

Size

1/4"

GPM

1.75

Balanced valve minimizes effects of the inlet pressure variations on outlet pressure. Body, valve and bottomplug are brass. Bonnet is aluminum and steel. Elastomers are nitrile.

Water Pressure Regulators

• T-handle adjustment standard• Non-relieving type• Maximum pressure: 400 PSI• Operating temperature:

water service: 35° to 200°F(2° to 93°C)air service: -30° to 200°F(-34° to 93°C)

• Supplied with a GC230 gauge

with Gauge

Part #11-009-06511-009-081

Size

3/4"1"

GPM

27.527.5


Filters/Regulators

• 2 oz. reservoir• Adjustable pressure from 5-150 PSI• Inlet pressure for transparent bowl

is 150 PSI• Inlet pressure for metal bowl

is 250 PSI maximum• Supplied with a GC620 gauge

• In-line or modular installation• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40 micron filter element standard• Particle removal per ISO 8573-1,

Class 5 and Class 2


Part #SizePart #

B72G-2AGB72G-3AG

Size

1/4"3/8"

1/4"3/8"

B72G-2MGB72G-3MG


SCFM

8080

SCFM

8080


Part #SizePart #

B72G-2AG-MBB72G-3AG-MB

Size

1/4"3/8"

1/4"3/8"

B72G-2MG-MBB72G-3MG-MB


SCFM

8080

SCFM

8080


Part #SizePart #

B73G-2AGB73G-3AGB73G-4AG

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

B73G-2MGB73G-3MGB73G-4MG


SCFM

78123123

SCFM

78123123


Part #SizePart #

B73G-2AG-MBB73G-3AG-MBB73G-4AG-MB

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

B73G-2MG-MBB73G-3MG-MBB73G-4MG-MB


SCFM

78123123

SCFM

78123123

• In-line or modular installation• Quick-release bayonet bowl• Prismatic lens liquid level indicator• 40 micron filter element standard• Particle removal per ISO 8573-1,

Class 5 and Class 2

• 2 oz. reservoir• Adjustable pressure from 5-150 PSI• Inlet pressure for transparent bowl

is 150 PSI• Inlet pressure for metal bowl is

250 PSI maximum.• Supplied with a GC230 gauge

Filters / Regulators


• Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or morepoints of lubrication, cylinders and multiple or single tools.

• Air flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the foggenerator and atomized into a fine mist. Lightweight particles are delivered downstream for lubrication.Heavier particles fall back into the reservoir.

• The micro-fog lubricator delivers 10% of the oil drops visible through the transparent sight-feed dome.• Micro-fog lubricators cannot be filled under pressure.

• 2 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil

rated 50 to 200 SSU (ISO Grade 7 to 46) at 100°F.


Part #

L72M-2L72M-3

Size

1/4"3/8"

SCFM

5151

Micro-Fog Design Lubricators


Part #

L72M-2MBL72M-3MB

Size

1/4"3/8"

SCFM

5151


Part #SizePart #

B74G-3AGB74G-4AGB74G-6AG

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

B74G-3MGB74G-4MGB74G-6MG


SCFM

163212212

SCFM

163212212


Part #SizePart #

B74G-3AG-MBB74G-4AG-MBB74G-6AG-MB

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

B74G-3MG-MBB74G-4MG-MBB74G-6MG-MB


SCFM

163212212

SCFM

163212212

• 1/2 pt. reservoir• 5-125 PSIG adjustable range• Relieving type diaphragm• 40-micron filter element

• Non-rising adjustment with easilysealed lockring to resist tampering.

• Other pressure ranges available• Supplied with a GC230 gauge

Filters / Regulators


Lubricators

• 4 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist.• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated

50 to 200 SSU (ISO Grade 7 to 46) at 100°F.


Part #

L73M-2L73M-3L73M-4

Size

1/4"3/8"1/2"

SCFM

707070


Part #

L73M-2MBL73M-3MBL73M-4MB

Size

1/4"3/8"1/2"

SCFM

707070

• 7 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist.• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated



Part #

L74M-3L74M-4L74M-6

Size

3/8"1/2"3/4"

SCFM

114154142


Part #

L74M-3MBL74M-4MBL74M-6MB

Size

3/8"1/2"3/4"

SCFM

114154142

Lubricators


• Designed for use with alcohol or other anti-freeze agents when units are installed in cold temperature environments.• Pyrex® sight feed dome with aluminum case and fluorocarbon O-Rings and seals; Pyrex® sight glass on bowls and

metal petcock drain.• Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or more points of

lubrication, cylinders and multiple or single tools.• Air flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator

andatomized into a fine mist. Lightweight particles are delivered downstream for lubrication. Heavier particles fallback into the reservoir.

• The micro-fog lubricator delivers 10% of the oil drops visible through the transparent sight-feed dome.• Micro-fog lubricators cannot be filled under pressure.


Part #L72M-2MBPXL72M-3MBPX

Size

1/4"3/8"

SCFM

5151

• 2 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist.• Quick release bayonet bowl• Inlet pressure for metal bowl is 250 PSI

• Maximum temperature for metal bowlis 175°F

• Recommended lubricants: Use amisting type oil rated 50 to 200 SSU(ISO Grade 7 to 46) at 100°F.

• 2 gal. reservoir• Oil flow can be positively set• Reservoirs are ASME construction• Inlet pressure 250 PSI maximum

• 1 qt. metal reservoir with drain and oil level sight gauge• One turn threaded bowl attachment permits easy

maintenance• Inlet pressure 250 PSI maximum.


Part #

L17-600AL17-800AL17-A00AL17-B00A

Size

3/4"1"

1-1/4"1-1/2"

SCFM

160275275275

General Purpose - 2" Ports(Oil-Fog ONLY)

Part #

10-076-004

Size

2"

SCFM

1000

Micro-Fog, Pyrex® Sight Feed Dome Lubricators

Lubricators


• 7 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist• Quick release bayonet bowl• Inlet pressure for metal bowl is 250 PSI



Micro-Fog, Pyrex® Sight Feed Dome Lubricators


Part #

L73M-2MBPXL73M-3MBPXL73M-4MBPX

Size

1/4"3/8"1/2"

SCFM

606060

• 4 oz. reservoir• In-line or modular installation• Micro-fog design delivers aerosol mist• Quick release bayonet bowl• Inlet pressure for metal bowl is 250 PSI




Part #

L74M-3MBPXL74M-4MBPXL74M-6MBPX

Size

3/8"1/2"3/4"

SCFM

114154142

• 1 qt. metal reservoir with drain andoil level sight gauge

• Inlet pressure 250 PSI maximum

• Particle removal per ISO 8573-1,Class 5 and Class 2

• One turn threaded bowl attachmentpermits easy maintenance


Part #

L17-600APXL17-800APXL17-A00APXL17-B00APX

Size

3/4"1"

1-1/4"1-1/2"

SCFM

160275275275

Lubricators


• 2 oz. reservoir• In-line or modular installation• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated


• 4 oz. reservoir• In-line or modular installation• Quick release bayonet bowl• Inlet pressure for transparent bowl is 150 PSI• Inlet pressure for metal bowl is 250 PSI• Maximum temperature for transparent bowl is 125°F• Maximum temperature for metal bowl is 175°F• Recommended lubricants: Use a misting type oil rated


• Oil-fog lubricators, identified by a green adjusting screw, are used for lubricating a single air tool or air motor,and are located as near the device as possible.

• All the oil visible dropping through the transparent sight-feed dome goes to the airstream.• L72C, L73C and L74C OIL-FOG lubricators can be filled under pressure.

Oil-Fog Design Lubricators


Part #L72C-2L72C-3

Size

1/4"3/8"

SCFM

5151


Part #L72C-2MBL72C-3MB

Size

1/4"3/8"

SCFM

5151


Part #

L73C-2L73C-3L73C-4

Size

1/4"3/8"1/2"

SCFM

606060


Part #

L73C-2MBL73C-3MBL73C-4MB

Size

1/4"3/8"1/2"

SCFM

606060


• One turn threaded bowl attachment permits easymaintenance

• 1 qt. metal reservoir with drain and oil level sight gauge• Inlet pressure 250 PSI maximum

• 7 oz. reservoir• In-line or modular installation• Quick release bayonet bowl.• Inlet pressure for transparent bowl

is 150 PSI• Inlet pressure for metal bowl is 250 PSI

• Maximum temperature fortransparent bowl is 125°

• Maximum temperature formetal bowl is 175°F.


Lubricators

Oil-Fog Design Lubricators

• Oil-fog lubricators, identified by a green adjusting screw, are used for lubricating a single air tool or air motor,and are located as near the device as possible.

• All the oil visible dropping through the transparent sight-feed dome goes to the airstream.• L72C, L73C and L74C oil-fog lubricators can be filled under pressure.


Part #

L74C-3L74C-4L74C-6

Size

3/8"1/2"3/4"

SCFM

118192186


Part #

L74C-3MBL74C-4MBL74C-6MB

Size

3/8"1/2"3/4"

SCFM

118192186


Part #

L17-600DL17-800DL17-A00DL17-B00D

Size

3/4"1"

1-1/4"1-1/2"

SCFM

160275275275

General Purpose - 2" Ports

Part #

10-076-004

Size

2"

SCFM

1000

• 2 gal. reservoir• Oil flow can be positively set• Reservoirs are ASME construction• Inlet pressure 250 PSI maximum


316 Stainless Steel Pressure Regulators are used in compressed air systems to maintain pressures at levelssuitable for the proper operation of air-operated devices. They are designed for use where resistance to corrosionand chemical attack is required. Applications include process-control, petrochemical and marine applications.

Stainless Steel Lubricator - Oil-Fog DesignMaterials meet NACE (National Association of Corrosion Engineers) Standard MR-01-75 (1980 Revision) whichdefines requirements for materials which are resistant to sulphite stress cracking (SSC) for applications in oil fieldequipment. 316 Stainless Steel construction provides strength and resistance to corrosion and chemical attack.Pyrex® sight dome on body provides clear visibility of drip rate. Pyrex® sight glass on bowl has striped back-ground to provide clear visibility of liquid level. Flow sensor design provides a nearly constant oil/air ratio over awide range of air flows. Can be filled under pressure.

Materials meet NACE (National Association of Corrosion Engineers) Standard MR-01-75 (1980 Revision) whichdefines requirements for materials which are resistant to sulphite stress cracking (SSC) for applications in oil fieldequipment. 316 Stainless Steel construction provides strength and resistance to corrosion and chemical attack.Pyrex® sight glass with striped background provides clear visibility of liquid level and resistance to chemicalattack.

• Full-flow 1/4" gauge ports can be used asauxiliary flow ports

• Relieving type• Adjustable 5-150 PSI• Inlet pressure 290 PSI maximum

• 8 oz. bowl• 1/2" NPT port• Manual drain• Accurate drip rate adjustment• Inlet pressure for metal bowl is 250 PSI

• 8 oz. bowl• 25-Micron filter element standard• Inlet pressure for metal bowl is 250 PSI

Stainless Steel

Stainless Steel Filter

Stainless Steel Regulator

22 series - Metal Bowl with Sight Glass

Part #

L22-405MB

Size

1/2"

SCFM

102

22 series - Metal Bowl with Sight Glass

Part #

F22-405A-MB

Size

1/2"

SCFM

98

Automatic Drain

22 series

Part #

R22-405R

Size

1/2"

SCFM

106

without Gauge


Combination Units

• 72 Series Combination Units areconnected modularly

• Includes 2 clamp and wall mountingbrackets #4214-52, 2 clamps #4214-51and 2 NPT pipe adapters.See modular components onpages 34-35 for other options.

• 2 oz. reservoir• Adjustable 5-150 PSI• Inlet pressure for transparent bowl


maximum

Mini - Transparent Bowl

Part #SizePart #

P1A-100AP1A-200A

Size

1/8"1/4"

1/8"1/4"

P1A-100MP1A-200M


SCFM

1010

SCFM

1010

• 1 oz. reservoir


Part #SizePart #

E72-2AE72-3A

Size

1/4"3/8"

1/4"3/8"

E72-2ME72-3M


SCFM

3636

SCFM

3636

• 2 oz. reservoir1/4" Basic - Metal Bowl with Sight Glass

Part #SizePart #

E72-2A-MBE72-3A-MB

Size

1/4"3/8"

1/4"3/8"

E72-2M-MBE72-3M-MB


SCFM

3636

SCFM

3636


• Includes 2 clamp and wall mountingbrackets #4314-52, 2 clamps#4314-51 and 2 NPT pipe adapters.See modular components onpages 34-35 for other options.



maximum


Part #SizePart #

E73-2A-MBE73-3A-MBE73-4A-MB

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

E73-2M-MBE73-3M-MBE73-4M-MB


SCFM

707070

SCFM

707070


Part #SizePart #

E73-2AE73-3AE73-4A

Size

1/4"3/8"1/2"

1/4"3/8"1/2"

E73-2ME73-3ME73-4M


SCFM

707070

SCFM

707070

Combination Units


Combination Units


• Includes 2 clamp and wall mountingbrackets #4314-52, 2 clamps #4314-51and 2 NPT pipe adapters. See modularcomponents on pages 34-35 for otheroptions.



maximum


Part #SizePart #

P8A-660AP8A-860A

Size

3/4"1"

3/4"1"

P8A-660MP8A-860M


SCFM

160275

SCFM

160275

• 1 qt. reservoir


Part #SizePart #

E74-3A-MBE74-4A-MBE74-6A-MB

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

E74-3M-MBE74-4M-MBE74-6M-MB


SCFM

140140140

SCFM

140140140


Part #SizePart #

E74-3AE74-4AE74-6A

Size

3/8"1/2"3/4"

3/8"1/2"3/4"

E74-3ME74-4ME74-6M


SCFM

140140140

SCFM

140140140

These units are intended for use in industrial compressed air systems only. They must not beused where pressure or temperature may exceed maximum rated operating conditions. Thepolycarbonated plastic bowls used on these units can be damaged and possibly burst if exposedto such substances as certain solvents, strong alkalies, compressor oils that contain ester-basedadditives or synthetic oils. Fumes of these substances in contact with the polycarbonate bowl,externally or internally, can also result in damage. Clean with warm water only. Use metal bowlin applications where a plastic bowl might be exposed to substances that are incompatible withpolycarbonates. Not for use with fluids.Combination Units are supplied with micro-fog lubricators.

Combination Units


Series 1 Drip Leg Automatic Drain

Series 1 Three-Way Shut-Off Valves

Desiccant Compressed Air Dryers

7 oz. 1 qt.

Cubic Foot ratings at 100 PSI inlet pressure.

• Compressed air dryers help to eliminate condensation at the point of use. A replaceable element filters outletair to help prevent desiccant dust migration downstream.

• Silica gel desiccant changes color from blue to pink when desiccant replacement is needed. Desiccant can bedried and reused by heating to 275°F, or replaced. 7 oz. bowl uses 1 gel packet; 1 qt. bowl uses 5 gel packets.

• An after filter should be placed downstream from the desiccant dryer to ensure solid contaminants such asdesiccant dust do not migrate downstream.

In-line or modular installation. Quick release bayonet bowl.7 oz: Nominal air drying capacity 750 cubic feet at 100 PSI and 77°F.

Maximum inlet pressure: 150 PSI. Maximum temperature: 175°F.transparent bowl with guard; .25 lb. capacity

1 qt: Moisture indicator on top of body.Nominal air drying capacity 6000 cubic feet at 100 PSI and 77°F.Maximum inlet pressure: 250 PSI. Maximum temperature: 175°F.metal bowl; 1.25 lb. capacity

• Shut-off valves, typically attached to the inlet end ofa combination unit, are manually operated, slidetype valves that open and close with a short one-inch movement of the slide.

• The valve slide can be locked in the closed positionwith a customer supplied padlock.

• The standard valve is a 3-way valve that exhaustsdownstream air in the closed position.

• Recommended pressure is 250 PSI.• For use with 72 and 73 series filters, regulators and

lubricators on pages 15-26.• Conforms to OSHA lockout regulation

Part #

T73E-2T73E-3T73E-4

Size

1/4"3/8"1/2"

Used in compressed air systems to automatically expel liquids from piping systems. Installed at low points inpiping and at end of pipe network, where water is likely to accumulate.

• Metal bowl• Drain is ported to 1/8" NPT• Inlet for metal bowl: 250 PSIG

Accessories

Part #

17-016-107

Size

1/2"

Part #

W74D-2A-MB7W74D-2A-MB32

Size

7 oz.1 qt.

SCFM

1020

Size

1/4"1/4"


Brass Hex Nipples

Steel Close Nipples

Do not use pipe nipples as hose inserts.

Part #

BCN12BCN25BCN37BCN50BCN75

BCN100

Size

1/8" x 1/8"1/4" x 1/4"3/8" x 3/8"1/2" x 1/2"3/4" x 3/4"

1" x 1"

Part #

CN100CN125CN150CN200

Size

1" x 1"1-1/4" x 1-1/4"1-1/2" x 1-1/2"

2" x 2"

Accessories

Filter AccessoriesPart #Description

4380-0204380-0304380-051

Liquid level lens kitLiquid level lens kitPyrex® sight glass kit

For

F73F72F74

Bowls and Bowl GuardsPart #Description

3646-513646-53

3646-544266-50RF4266-52RF

4425-50RF4425-51RF4325-51R4325-52R4203-51RF

4425-50RL4304-77R

4325-50R4326-01

Polycarbonate bowl w/ auto drainPolycarbonate bowl with manualdrainPolycarbonate bowl with drainTransparent bowl with manual drainTransparent bowl with semi-automatic drainTransparent bowl with manual drainTransparent bowl with auto drainTransparent bowl with manual drainTransparent bowl with auto drainMetal bowl with Pyrex® liquid levelIndicator and ¼ turn manual drainTransparent bowl with manual drainMetal bowl with Pyrex® liquid levelIndicator and ¼ turn manual drainTransparent bowl with manual drainBowl guard

For

F07F07

L07F72F72

F73F73F74, B74F74, B74L72

L73L74

L74F74, B74,L74

Filter ElementsPart #Description

3652-115311-015311-025311-035882-115882-125882-135925-035925-024438-014438-034338-044338-05

5 micron5 micron25 micron40 micron5 micron25 micron40 micron5 micron40 micron5 micron40 micron5 micron40 micron

For

F07F17

F18

F72

F73

F74


Accessories

Regulator Replacement SpringsPart #Description

4232-024232-034432-014432-024332-014332-02

5-605-1505-60

5-1505-60

5-150

For

R72

R73

R74

Element ReplacementsPart #Description

4344-014344-024341-014385-700

Oil removal filterOil removal filterVapor removal filter5 silica gel refills, .25lb. each

For

F74CF74H F74VW74D

Mounting BracketsPart #Description

2962-895988-025226-975939-066212-506212-515095-1718-025-0035570-0418-001-96218-001-959

Plastic panel nutPanel nut (stainless steel)Metal panel nutMounting bracketMounting bracket kit for ¾" & 1"Mounting bracket kit for 1¼" & 1½"Mounting bracketMounting bracketMounting bracketMounting bracket kitMounting bracket kit w/panel nut

For

R07R22R17F07F17, L17F17, L17L07R07, B07R17R22R22

Lubricator AccessoriesPart #Description

18-011-0212325-10720-014272-992325-135301-554055-50

4055-51

5055-545605-504380-050

Quick fill capViton® sealBuna sealAcetal fill plugViton® sealAluminum fill plugSight feed dome

(Micro-fogging design)Sight feed dome

(Oil-fogging design)Sight feed domePyrex® sight feed domeLiquid level indicator repair kit

For

L17, L74L72L72L72L74L73, L74L72, L74

L72

L12L72, L74L74

Repair KitsPart #Description

5945-503407-02529-035578-025945-404381-5004381-6004381-700

Repair kitRepair kitRepair kitRepair kitRepair kitRepair kitRepair kitRepair kit

For

F18R07R11R17R18R72R73R74

Auto and Manual DrainsPart #Description

3000-102796-525379-RK4000-51R3000-10619-50

Auto drainManual drain assemblySemiautomatic drainAuto drainAuto drainManual drain

For

F17F17, L17F72F72, F73F74F72, F73,F74


Accessories

Use to panel mount regulators and filter/regulators.Series 72 nut is plastic; Series 73 and 74 nuts are zinc.

GaugesPart #Description

GC620GC230

0-160 PSI gauge0-160 PSI gauge

For

R72, B72R73, R74,B73, B74

Panel Nuts

Part #

4248-895191-884348-89

For

727374

Part #

5797-50

For

74

Service Life Indicator Conversion Kit forF74 Airline Filters and Oil Removal Filters

Allows addition of service life indicator in the field.

Part #

2117-01

For

73,74

Seal Wire

Install under sight feed dome on L73 and L74 lubricatorsto provide tamper resistant protection of the lubricatordrip rate setting.

Part #

4255-514455-514355-51

For

727374

Tamper Resistant Cover & Seal Wire

Install on the adjusting knob of regulators or filter/regulatorsto help prevent unauthorized adjustment to the pressuresetting. Cover can be locked in place with up to fourpadlocks.

O-Ring KitsPart #Description

5578-055771-024380-5004380-6004380-7004382-5004382-6004382-700

O-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kitO-Ring kit

For

F17L17F72F73F74L72L73L74


Wall Mounting BracketsFor use with 72, 73 & 74 Series products to secure to a wall,machine panel or other flat surface. For use instead ofquickclamps and pipe adapters for wall attachment ofcombination unit or individual filter, regulator or lubricator.Use close nipples to connect combination unit and then placein bracket.

Typical SetupCombination unit shown with clamps, end pipe adapters andwall mounting brackets.

Clamp Wall Mounting BracketsUse with the clamp to provide secure mounting to a wall,machine panel or other flat surface. 72 Series mounts with3/16" screws; 74 Series mounts with 7/32" screws.

ClampsFor use with all 72, 73 & 74 Series products to providemodular installation capability. Flanges on the products slideinto V grooves in the clamp. Two face-sealing O-rings in theclamp provide a positive seal when the clamp is closed andthe captive screw is tightened.

Clamp and Wall Mounting Brackets

Porting BlocksInstalls between two clamps to provide three additional 1/4"PTF outlets for auxiliary air.

Pipe AdaptersFor use with clamps to provide PTF threaded connections tothe system piping. Sold individually.

Manifold BlocksInstalls with clamps. 72 Series ports are threaded 3/8" PTF;73 & 74 Series ports are threaded 3/4" PTF to providemanifolding capability for up to three components.

Accessories

Part #

4216-504316-50

For

7273, 74

Part #

4228-014328-50

For

7273, 74

Part #

4214-524314-52

For

7273, 74

Part #

4213-894313-50

For

7273, 74

Part #

4214-514314-514384-5704384-770

For

72 Quickclamp73, 74 Quickclamp72 Service Kit (2 O-rings)73, 74 Service Kit (2 O-rings)

* For L74 with 1 quart reservoir

Part #

4224-504424-504324-504324-51*

For

72737474

Part #

4215-024215-034315-014315-024315-034315-04

727273, 7473, 7473, 7473, 74

Size

1/4"3/8"1/4"3/8"1/2"3/4"

For

Through its divisions and affiliated companies, Dixon is

recognized as the premier manufacturer and supplier of

hose fittings and accessories spanning a wide range of

industrial uses. Dixon’s reach includes products for fire

protection,food, dairy processing, beverage and brewery,

mobile tankers, mining, construction, chemical processing,

petroleum, oilfields, refining, nuclear and manufacturing.

800 High Street, Chestertown, MD 21620Customer Service: 800.355.1991Fax: 800.283.4966www.dixonvalve.com

Dixon Valve & Coupling Company

© 2006 DVCC Printed in the USA NFRL406-1P5M

norgren filters, regulators and lubricators - bay … norgren.pdf · 2 customer service:...

Documents