non-contact displacement vibration transducer · non-contact displacement vibration transducer...
TRANSCRIPT
seriesVKNon-contactDisplacement VibrationTRANSDUCER
Contact to
Printed in Japan 10204E2.2-07501 C 2003-2007 All rights reserved.
Published in Jan. 2007
SHINKAWA Sensor Technology, Inc.
SHINKAWA Electric Co., Ltd.3rd Fl. Shin-kojimachi Bldg.3-3 Kojimachi 4-chome, Chiyoda-kuTokyo 102-0083, JapanPhone : 81-3-3263-4411 Fax : 81-3-3262-2171 WEB : http://www.shinkawa.co.jp/
SEC of America Inc.6934 Beach Drive SW, Ste.4, Ocean Isle Beach, NC28469-5797, USAPhone : 1-910-579-3220 Fax : 1-910-575-3238e-mail : [email protected] : http://www.sec-america.com
4-22 Yoshikawa-kogyodanchi, Higashihiroshima 739-0153, JapanPhone : 81-82-429-1118 Fax : 81-82-429-0804WEB : http://www.sst-shinkawa.co.jp
* Specifications, outline drawings and other written information can be changed without notice.
Consists of sensor, extension cable and driver. Available inlengths of 15m and 20m, the total distance between sensorand driver.
TIIS equivalent to IEC standard, Ex ia IIC T6
LONG CABLE TRANSDUCERVK-RThe VK-R series vibration transducer is an eddy-current transducer designed to measure the shaft vibration without contact,and complies with API Standard 670. With its long cable extension feature, this transducer is most suitable for many types ofrotating machinery, such as power generating gas turbines whose large size also requires a vibration transducer with a longcable length. The VK-R transducer can also be used in an explosive gas atmosphere due to its intrinsically safe construction.
DRIVER
SENSOR
EXTENSION CABLE
VK-202A VK-452A VK-202P
VK-302P VK-602P VK-143P
VK-263P VK-152R
REVERSE MOUNT TYPE SENSOR
[Specifications]
Calibration Material
Linear Range
Sensitivity
OperationTemperatureRange
Sensor
Ext. cable
Driver
Power Supply
System Cable Length
VK-152R
787 mV / 100 µm
More then 1,500 µmJIS SCM440 (AISI 4140 Steel ) Flat Surface
-40 to +177 deg. C(connector : MAX. 125 deg. C)
-40 to +177 deg.C
-38 to +80 deg.C
15 m +/- 10% or 20 m +/- 10%
-24 VDC(-18 to -26 VDC)
STATIC CHARACTERISTICS
( 0.5 or 1.0 m )8( )
φ 10
()
φ5
()
φ 9.5max.
9φ
Thread
Sensor tip
Flexible armor
Sensor cable
Coaxial connector
Jam nut
( 0.5 or 1.0 m )28( ) 5
φ 10
()
φ 5
()
9.5max.
φ
Hex. 14
ThreadSensor cable
Jam nut
Sensor tip
Coaxial connector
MAX.φ6
( 13.0 to 19.5 m )
9.5max.
φφ 9
Driver sideSensor side
Coaxial connector
Coaxial connectorCoaxial cableFlexible armor
00.40.0 0.8 1.2 1.6 2.0 2.4 2.8
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
Output(V)
GAP (mm)
00.50.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
Output(V)
GAP (mm)
00
5 10 15 20 25 30 35
-2
-4
-6
-8
-10
-12
-14
-16
Output(V)
GAP (mm)
0.0 0.5 1.0 1.5 2.00
-2
-4
-6
-8
-10
-12
-14
-16
-18
Output(V)
GAP (mm)
00
1 2 3 4 5 6 7 8
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
Output(V)
GAP (mm)
00
5 10 15 20 25
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
Output(V)
GAP (mm)
01.00.0 2.0 3.0 4.0 5.0 6.0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
-24
Output(V)
GAP (mm)
00.40.0 0.8 1.2 1.6 2.0 2.4 2.8
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
Output(V)
GAP (mm)
Dimensions : mm
Dimensions : mm
* Current and detail information are refer to Web site (http://www.sst-shinkawa.co.jp)
System composition
Intrinsic safety explosion-proof construction
Anti-corrosionExtensive operating temperature range (-40 to +177 deg.C).Not affected by lubricating oil or dust (excluding connector).Extensive operating temperature range (-40 to +177 deg.C).Not affected by lubricating oil or dust (excluding connector).
4- φ4
92
49
(41)
33
(104)
31
Name plate Insulator
Terminal block
ConnectorBody
TSI TRANSDUCERVK-P
VK-263P SENSOR
VK-263P SIDE EXIT TYPE SENSOR
VK-602P SENSOR
VK-143P SENSOR
VK-143P SIDE EXIT TYPE SENSOR
18(φ
)
( 0.5 or 1.0 m )
( 0.5 or 1.0 m )
( 0.5 or 1.0 m )
9.5max.
φ
φ5
()
9φ
14( )
Thread
Sensor tip
Flexible armor
Sensor cable
Coaxial connector
Jam nut
(23)
(φ 25)
(φ5)
9.5max
φ
φ 9
ThreadFlexible armor
Sensor cableJam nut
Sensor tip
Coaxial connector
4-M6 depth 14
P.C.D40
(φ 25.4) 9.5max
φ
42.5
52φ
(φ 5)
φ 9
Flexible armor
Sensor cable
Sensor tip
Coaxial connector
( 0.5 or 1.0 m )
( 0.5 or 1.0 m )
49.5
50(φ
)
9φ
φ 52
(φ 5)
φ 9.5max.
Thread
Sensor tip
Flexible armor
Sensor cable
Coaxial connector
Jam nut
P.C.D40
4-M6 depth 14
φ9
52φ
9.5max.
φ
(φ 5)
50(φ )
56.8
Sensor tip
Flexible armor
Sensor cable
Coaxial connector
Dimensions : mm
Dimensions : mmDimensions : mm
Dimensions : mm
Dimensions : mm
Consists of sensor, extension cable and driver. Available inlengths of 5m and 9m, the total distance between sensorand driver.
TIIS equivalent to IEC standardEx ia IIC T5, CSA, FM, ATEX
Extensive operating temperature range (-40 to +125deg. C).Not affected by lubricating oil or dust (excluding connector).Ammonia resistant and hydrogen sulfide models are alsoavailable. (For details, contact us.) (Outside installationinappropriate.)
The VK-P series transducer is offered in five measuredranges of 2mm, 3mm, 6mm, 13.5mm and 26mm. Suitablefor long-range measurement as required for TSI.
DRIVER
EXTENSION CABLE
VK-302P SENSOR
VK-202P SENSOR
VK-302P REVERSE MOUNT TYPE SENSOR
MAX.φ6
( 4.0 to 8.5 m )
9.5max.
φ
φ 9
Driver sideSensor side
Coaxial connector
Coaxial connectorCoaxial cableFlexible armor
9.4
φ 6max.
φ
(φ 8)
( 0.5 or 1.0 m )
(8)
9.5max.
φ
Thread
Sensor tip
Flexible armorCoaxial connector
Sensor cableJam nut
( 0.5 or 1.0 m )
8( )
φ 10
()
φ 5
()
φ9.5max.
9φ
Thread
Sensor tip
Flexible armor
Sensor cable
Coaxial connector
Jam nut
( 0.5 or 1.0 m )2
8( ) 5
φ 10
()
φ 5
()
9.5.
φ
Hex. 14
ThreadSensor cable
Jam nut
Sensor Tip
Coaxial connector
Calibrated Material
Linear Range
Sensitivity
OperatingTemperatureRange
Sensor
Ext. Cable
Driver
Power Supply
System Cable Length
VK-202P
JIS SCM440 (AISI 4140 Steel) Flat Surface
787 mV / 100 µm-40 to +125 deg.C
-40 to +125deg. C
-38 to +80 deg. C
5 m +/-10 % or 9m +/- 10%
More than 2 mm(begins at approx. 0.3 mm from sensor tip)
VK-302P
5 V / mm
More than 3 mm(begins at approx. 0.3 mm from sensor tip)
VK-602P
2.5 V / mm
More than 6 mm(begins at approx. 0.3 mm from sensor tip)
Within -24 VDC +/-10 %
Calibrated Material
Linear Range
Sensitivity
OperatingTemperatureRange
Sensor
Ext. Cable
Driver
Power Supply
System Cable Length
VK-143P
0.8 V / mm
More than 13.5 mm(begins at approx. 0.3 mm from sensor tip)
VK-263P
0.4 V / mm
More than 26 mm(begins at approx. 0.3 mm from sensor tip)
JIS SCM440 (AISI 4140 Steel) Flat Surface
-40 to +125 deg. C
-40 to +125 deg.C
-38 to +80 deg. C
5 m +/- 10% or 9 m+/- 10%
Within -24 VDC +/- 10%
[Specifications]
System composition
Various type of measuredranges
Intrinsic safety explosion-proof construction
Anti-corrosion
Dimensions : mm
Dimensions : mm
Dimensions : mm
Dimensions : mm
Dimensions : mm
TSI TRANSDUCERVK-PThe VK-P series TSI transducer is a high-grade, eddy-current type, non-contacting transducer for
bearing position and differential expansion measurement required for TSI. It offers the necessary
low temperature drift and stability for displacement measurement, and can also be used in an
explosive gas atmosphere due to its intrinsically safe construction.
4- φ4
92
49
(41)
33
(104)
31
Name plate Insulator
Terminal block
ConnectorBody
Consists of sensor, extension cable and driver. Available inlengths of 5m and 9m, total distance between sensor anddriver.
Extensive operating temperature range (-40 to +177deg.C).Not affected by lubricating oil or dust (excluding connector).Ammonia resistant and hydrogen sulfide models are alsoavailable. For details, contact us. (Inappropriate for outsideinstallation, where sensors may be exposed to rain.)
Satisfies API Standard 670 regarding scale factor error,interchangeability and sensor size.
TIIS equivalent to IEC standardEx ia IIC T5 (VK-452A), Ex ia IIC T6 (VK-202A)CSA, FM, ATEX
TRANSDUCERVK-AThe VK-A series vibration transducer is an eddy-current transducer that measures the shaft vibration without
contact, and complies with API Standard 670. This is the most appropriate sensor to measure shaft vibration
supported by plain bearings, and is frequently used to monitor the vibration of turbine generators and
compressors. It can also be used in an explosive gas atmosphere due to its intrinsic safety construction.
VK-202A DRIVER
VW EXTENSION CABLE
VK-202A SENSOR
VK-202A REVERSE MOUNT TYPE SENSOR
[Specifications]Thread
Sensor tip
Flexible armor
Sensor cable
Coaxial connector
3.5
φ
7.1
φ
φ 5
()
5( )( 0.5 or 1.0 m )
Jam nut
Packing ( Al )
12/(13.9)Hex.
7.1
φ
( 0.5 or 1.0 m )
3.5
φ
(φ 8)10
φ
8( )
ThreadSensor cable
Jam nut
Sensor tip
Coaxial connector
Calibrated Material
Linear Range
Scale Factor
OperatingTemperatureRange
Sensor
Ext. Cable
Driver
Power Supply
System Cable Length
VK-202A VK-452A
JIS SCM440 (AISI 4140 steel) flat surface
More than 2,000 µm More than 4,500 µm787 mV / 100 µm 394 mV / 100 µm
-40 to +177 deg.C (Connector : MAX. 125 deg.C)
-40 to+177 deg.C
-38 to+80 deg.C
-24 VDC +/-10 %
5 m +/- 10 % or 9 m +/- 10 %
Driver sideSensor side
( 4.0 to 8.5 m )
8φ3.5
φ
7.1
φ6.8
φ
Coaxial connector
Coaxial connectorCoaxial cableFlexible armor
Dimensions : mm
Dimensions : mm
Dimensions : mm
Dimensions : mm
System composition
Intrinsic safety explosion-proofconstruction
Anti-corrosion
API compliant
4- φ4
92
49
(41)
33
(104)
31
Name plate Insulator
Terminal block
ConnectorBody
The VK-A Series vibration transducer is an eddy-current transducerdesigned to measures the shaft vibration, and satisfies theAmerican Petroleum Institute API Standard 670.
The VK-P Series TSI transducer is exclusively designed for bearing positionand differential expansion measurement. This high-grade, eddy-currenttype, non-contacting transducer offers lower temperature drift and stabledisplacement measurement.
With a long cable extension feature, this transducer is most suitable forpower generation gas turbines and other types whose large size requires avibration transducer with a long cable length.
Many types of rotating machinery are utilized in the oil refining-centered energy industry. To ensure safe operation of the machinery,consistent monitoring is essential. In many cases, machinery failuresresult in vibration value increases. Therefore, constant vibration valuemonitoring promotes early irregularity detection and considers optimalcounter plans. SHINKAWA vibration monitoring products are variedand flexible, adapting to any user’s customized system.
AHIGHGRADETRANSDUCERFORSAFE-ROTATINGMACHINERYOPERATION
Complies with American Petroleum Institute (API) Standard 670Non-contact rotor vibration measurementSensor durabilityA variety of monitors-displacement, vibration, rotation, and zero speed
VK-A Series / TRANSDUCER
VK-P Series / TSI TRANSDUCER
VK-R Series / Long cable TRANSDUCER
Gas TurbineSteam TurbineGenerator
Analysis & DiagnosisSystem
Monitor
VK Driver
Sensor
DANGER
ALERT1 2
DANGER
ALERT1 2
DANGER
ALERT1 2
DANGER
ALERT1 2
DANGER
ALERT1 2
DANGER
ALERT1 2
DANGER
ALERT1 2
TRANSDUCER & MONITOR
Connector
VL Sensor VW Extension Cable
VK DriverSystem Length
LINE UP
This vibration monitoring system consists of various transducers and monitors for signal management. Numerous kinds ofmonitoring systems that suit any rotating machinery can be configured.
VK SYSTEM CONFIGURATION
MONITORING SYSTEM EXAMPLE