nissan nv200 (2010-2015) - gamber-johnson nv200_ped.pdf · nissan nv200 (2010-2015) heavy-duty...

2
Rugged Solutions: Nissan NV200 (2010-2015) Heavy-Duty Vehicle Bases & Pedestals Computer Cradles & Docking Stations Recommended Vehicle Mounting Solution Follow us on:

Upload: phamminh

Post on 17-Sep-2018

240 views

Category:

Documents


0 download

TRANSCRIPT

Rugged Solutions:

Nissan NV200 (2010-2015)

Heavy-Duty Vehicle Bases & Pedestals

Computer Cradles & Docking Stations

Recommended Vehicle Mounting Solution

Follow us on:

Solution Components:

1. Vehicle Base (Item No. 7160-0557)Vehicle Base is a no-drill solution and attaches to the passenger side seat studs. Designed using heavy gauge steel for long-term durability.

2. Lower Tube(Item No. DS-LOWER-13)The Lower Tube provides vertical clearance over the center console or the seat.

3. Upper Pole(Item No. 7160-0178)Center Upper Pole allows for closer mounting to the dash and less stress on the vehicle mounting equipment as gravity is centered on the pole. Wrench is needed for loosening, tightening or height adjustment.

4. 6” Locking Slide Arm(Item No. 7160-0500)Locking Slide Arm can rotate around 360° with locking points every 15°. Slide Arm can slide up to 5.5” from center pole. Motion Attachment has tilt capabilities up to 90° forward/26° backward and can be swiveled up to 360°. Motion Attachment works with VESA 75mm, Gamber-Johnson 2x4, NEC or AMPS hole patterns.

5. Support Brace(Item No. 7160-0230)Support Brace provides additional mount system support in rugged driving conditions and increases mounting system rigidity.

Rugg

ed D

ocki

ng S

tati

ons

and

Vehi

cle

Mou

nts

3001 Borham Ave, Stevens Point, WI 54481Toll Free: 800-456-6868 Fax: 800-934-3577Email: [email protected]

Nissan NV200 (2010-2015) - Pedestal System

This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2015 Gamber-Johnson, LLC

Gamber-Johnson is the leading manufacturer of quality, rugged docking stations and vehicle mounts. The solution shown is the recommended solution, however the components can be mixed and matched so you can design the solution that fits your specific requirements. Visit Gamber-Johnson’s website at www.gamberjohnson.com to view the complete line of vehicle mounts, console boxes and docking stations.

3

1

2

4

5