nibe f2300 and f2026 air/ water heat pump range

31
Air/water heat pumps Capture free energy from the outside air

Upload: billquigley

Post on 08-Sep-2014

661 views

Category:

Technology


0 download

DESCRIPTION

Presentation on the Nibe F2300 and F2026 Air/ Water Heat Pump Range

TRANSCRIPT

Page 1: Nibe F2300 and F2026 Air/ Water Heat Pump Range

Air/water heat pumps Capture free energy from the outside air

Page 2: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE Air/water

• Air/water heat pump: General– Good reasons to install a NIBE Air/water

heat pump– Principle for Air/water heat pumps– Product programme

• NIBE™ Monobloc air/water programme– NIBE F2026– NIBE F2300– NIBE Monobloc ait/water programme:

Possible combinations– NIBE F2026/F2300 + SMO 05 system– NIBE F2026/F2300 + NIBE SMO 10 system– NIBE F2026/F2300 + NIBE SMO system – Other accessories – NIBE F2026/F2300 + NIBE VVM 500 system– NIBE F2026/F2300 + NIBE VVM 500 system – Other accessories – NIBE F2026/F2300 + NIBE VVM 300 system– NIBE F2026/F2300 + NIBE VVM 300 system – Other accessories – NIBE F2026/NIBE F2300 + an existing boiler– NIBE air/water – Recommended system solutions

• NIBE™ SPLIT – NIBE SPLIT systems– NIBE SPLIT systems – Other accessories

Page 3: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

Good reasons to install a NIBE Air/Water heat pump

• You save money. – Up to your annual bill for heatery and

domestic hot water.– Low installation cost.

• You reduce CO2 emissions. – One house equipped with a heat pump equals taking one car of the road.

• Classified as a renewable energy.

• A air/water heat pump (NIBE Split) not only heat your house. It provides cooling as well.

Page 4: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

Principle for air/water heat pumps

How do you get heat from cold air?

Air/water heat pumps utilise the heat energy from the outside air.

The heat pumps are designed for outside placement and transform the free energy stored in the air to useful heating and cooling energy and domestic hot water.

From 1 kWh electrical energy an annual average of 3 kWh heating energy is produced.

Page 5: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

Principle for air/water heat pumps

How do you get heat from cold air?

Heat pump technology is actually based on a very simple, well-known principle. It works in a similar way to any domestic refrigerator, using a vapour compression cycle.

1. Heat from the outside air is drawn in by the fan. The refrigerant in the evaporator is colder than the air, causing the heat to move from the air to the refrigerant. It then evaporates and absorbs the energy from the outside air.

1._2. This vapour moves to the compressor and reaches a higher pressure and temperature.

Page 6: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

Principle for air/water heat pumps

1. _2. _3. The hot vapour enters the

condenser and gives off heat as it condenses.

1. _2. _3. _4. The refrigerant moves to the expansion

valve; drops in temperature and pressure; then returns to the evaporator.

How do you get heat from cold air?

Page 7: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE F2026 NIBE F2300

Residential use Residential and commercial use

NIBE monobloc air-water programme

Page 8: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026

Page 9: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026

NIBE F2026 is an air/water heat pump, specially designed for the Nordic climate. F2026 has been developed with special attention to make installation as smooth as possible. For example, we always include anti-vibration water connections and built-in condensate water solution. The F2026 series can handle a house heating range of 5 – 13 kW.

A broad accessory programme is available, and there are numerous recommended possible combinations.

•Very low sound level

•Sizes: 6 kW, 8 kW and 10 kW

•Built-in condensate water tray

•Integrated intelligent controller

•Components selected for a long lifetime

•Flexible system solutions

•Discreet design

•Efficient scroll compressor

•Advanced defrosting

Page 10: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2300

Page 11: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2300

The NIBE F2300 is a air/water heat pump, specially designed for the Nordic climate.

F2300 can handle a building heating power demand of 12 – 22 kW.

The F2300-14 and -20 are particularly suitable for larger houses/buildings. Great efforts have been made to create attractive system combinations.

Special attention has been given to minimising the noise

level. For example, the noise level for the F2300-20 kW is no

more than that of a small 2026-8 kW, one of the quietest

units available on the market.

A broad accessory programme is available, and there are numerous recommended possible combinations.

•Sizes: 14 kW and 20 kW•COP levels are among the best on the market•Supply temperature 63 °C at -25 °C ambient•Very low noise level•Extended real working range down to -25 °C ambient•Built-in condensate water tray

Page 12: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ VVM 300Indoor module

NIBE monobloc air-water programme Possible combinations

NIBE™ SMO 10Advanced controller

NIBE™ SMO 05Basic controller

Existing boilerNIBE™ VVM 500Indoor unit

Page 13: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + SMO 05 system

Individual set up with the NIBE SMO 05 basic controller and F2026 or F2300

The NIBE SMO 05 controller has the new-generation user interface. You can install it in any convenient room or hall, from where you can make various adjustments to your heating system.

The NIBE SMO 05 supports one basic heating scheme enabling differently sized outdoor units and water heaters to be combined.

– Simple installation– Enables optimised control of the climate unit– Control the climate unit using degree minute calculation– Clear display of the heat pump’s and heating system’s

essential temperatures– Automatic legionella control– The combination F2026, SMO 05 and VPA 200/70 is ideal

for low ceiling heights

Page 14: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + SMO 10 system

Individual setup with the NIBE SMO 10 advanced controller and F2026 or F2300

The NIBE SMO 10 is an advanced control module supporting a broad range of different hydraulic schemes. The SMO 10 enables you to combine a NIBE F2026 air/water heat pump with other equipment and create your own customised heating system. Start with one NIBE F2026 heat pump; if you need more power, you can install as many as nine NIBE F2026 heat pumps together in the same system.

The addition of the SMO 10 intelligent control module allows your NIBE F2026 to work smoothly in a variety of ways. For example:

– Connected to another heating system such as gas, oil, electricity or district heating.

– Connected to a NIBE water heater of the size required to meet your domestic hot water needs.

– If you have a swimming pool, the SMO can connect your heat pump to your pool and heat that too.

– Systems controlled by the SMO can also incorporate solar panels, enabling you to use solar energy as a complementary heat source when available.

Page 15: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + SMO system – Other accessories

Page 16: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + VVM 500 system

Flexible all in one indoor module VVM 500 and F2026 or F2300 for a complete heating system.

VVM 500 is part of a new generation of products, which have been introduced to supply your home with inexpensive and environmentally friendly heating and domestic hot water in the most efficient way. Heat production is reliable and economical with integrated hot water coil, circulation pumps, solar coil, control system and immersion heater.

The indoor module is connected to the air/water outdoor unit

and your house heating distribution system. It is also prepared

for connection to a number of different products and accessories, e.g. solar or other external heat source, extra water heater, swimming pool and climate systems with different temperatures

Page 17: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + VVM 500 system – Other accessories

Page 18: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + VVM 300 system

All-in-one indoor unit cabinet solution VVM 300 and F2026

The VVM 300 indoor unit takes care of your hot water demand

and ensures that the correct heating power is sent to your heating

system in the most economical way. The system work with floating condensation. The unit produces the exact amount of energy that the building requires.

An advantage for installers is that the VVM 300 consists of all

the components needed. For example, it includes a built-in

expansion vessel and circulation pump. It is also fitted with a

modulating load pump.

The heat pump is weather-compensating: the outside temperature

is measured to ensure the correct supply temperature is

delivered to your heating system. If you have a pool or are thinking

of installing a pool, the VVM 300 is ready. Installers rate the

VVM 300 one of our most appreciated “all in one” units.

Page 19: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + VVM 300 system – Other accessories

Page 20: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ F2026/F2300 + existing boiler This system set up is often used to back up an existing heating

system. The built-in controller in the outdoor unit can work with

a thermostat.

In the case of a wood-fired boiler, the NIBE F2026 is connected

to the accumulator tank, which contains a water heater. When

the wood-fired boiler is not in use, the heat pump starts automatically, providing an economical heat source. It is controlled

by a thermostat in the accumulator tank.

In the case of an oil or gas boiler, the heat pump is connected

to the heating circuit just before the boiler, and contributes to

heating the house (but not the hot water). It is controlled by a

room thermostat.

Both of these installations make use of existing equipment and

thus keep installation costs down. However, the energy savings

that can be achieved are not as high as with the three other

systems described.

Page 21: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ air/water system solutions

Page 22: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT systems

Page 23: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT systems

Full SPLIT programme for residential use

We have developed a new range of six different split combinationssuitable for both new build and refurbishment installations. Factors such as the size of your house, where you live and your domestichot water needs will determine which pack is most appropriate foryou.

Alongside the indoor units, three different sizes of outdoor units are available. Each combination pack, containing a fixed indoor unit and an outdoor unit, has been carefully developed to achieve the optimal performance (COP) for heating and hot water production. The indoor units consist of either an all-in-one cabinet with hot water cylinder included or a control cabinet (hydro box) with a choice of separate cylinders.

•NIBE SPLIT is a system for heating, cooling and hot water production for a variety of house sizes•Now choose from six packs to meet your individual needs•Easy installation, especially for the all-in-one indoor unit•Best-in-class energy savings•Full accessory programme, for example pre-defined solar packs

Page 24: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT Pack 1

NIBE SPLIT air/water heat pump, indoor unit ACVM 270 and outdoor unit AMS 10-8

•Plug and play heating system suitable for small sized homes and normal hot water demand

•House heating demand 3 – 7 kW

Page 25: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT Pack 2

NIBE SPLIT air/water heat pump, indoor unit ACVM 270 and outdoor unit AMS 10-12

•Plug and play heating system suitable for average sized homes and normal hot water demand

•House heating demand 5 – 10 kW

Page 26: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT Pack 3

Separate controller (hydro box) and separate tank, HBS 12 + HEV 500 and outdoor unit AMS 10-12

•Plug and play heating system suitable for average sized homes and high hot water demand.

•House heating demand 5 – 10 kW

Page 27: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT Pack 4

Separate controller (hydro box) and separate tank HBS 16 + HEV 300 and outdoor unit AMS 10-16

•Plug and play heating system suitable for large sized homes and normal hot water demand

•House heating demand 7 – 13 kW

Page 28: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT Pack 5

Separate controller (hydro box) and separate tank HBS 16 + HEV 500 and outdoor unit AMS 10-16

•Plug and play heating system suitable for large sized homes and high hot water demand

•House heating demand 7 – 13 kW

Page 29: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT Pack 6

• Separate controller (hydro box) and separate tank HBS 16 + HE 30 and outdoor unit AMS 10-16

• Plug and play heating system suitable for large sized buildings and no hot water demand

• House heating demand 7 – 13 kW

Page 30: Nibe F2300 and F2026 Air/ Water Heat Pump Range

NIBE ENERGY SYSTEMS

Air/water heat pumps

NIBE™ SPLIT systems – Other accessories

Page 31: Nibe F2300 and F2026 Air/ Water Heat Pump Range