ni venng ti perfect skin for you - biotechnologia.pl · baycusan® c 1000 not only improves the...

Beauty Made Possible.

INVENTING PERFECT SKIN

FOR YOU

Around the world, notions of beauty are as colorful as the people who pursue them. There is certainly more than just one kind of beauty, and everybody has their own idea of what beauty involves. Although personal definitions may differ, one aspect remains the same: Everyone wants to be beautiful in some way. And that’s what Baycusan® is all about – enabling individual beauty through your products.

Baycusan® is your key ingredient for creating products that enable people to be as beautiful as they would like to be. We are passionate about inventing products – for you and together with you – that expand the possibilities for being beautiful. We like to keep raising the bar, re-inventing and perfecting, so that in the end it’s not just products but Beauty Made Possible.

This brochure presents three formulation lines featuring our innovative film-formers Baycusan® C 1000, Baycusan® C 1001 and Baycusan® C 1004, and our polyurea powder Baycusan® C 1005. They set new benchmarks in skin care with outstanding cleansing, conditioning and treatment capabilities – for perfect skin every day.

»Our skin is like a delicate pearl. Let’s treasure its beauty with gentle passion.«

Skincare Product Lines

SkinCleansingPeel off imperfection.

04

SkinConditioningEven out imperfection.

08

SkinTreatmentWard off imperfection.

20

SkinCleansing SkinConditioning SkinTreatment

SkinCleansing – comfortable peeling masks for velvety smooth skin.

Skin has a natural tendency to imperfection – sometimes a little more, some-times a little less. Removing excess grease and impurities is no big deal – at least it shouldn’t be. Yet most cleansing facemasks are hard to peel off and leave irritations or a feeling of tight skin.

That’s where our innovative film-former Baycusan® C 1001 is just doing the right job. It forms a flexible and breathable film that is not only comfortable to wear but also makes every mask really easy to peel off. The only thing left is velvety smooth skin – made possible by our SkinCleansing formulation line!

– SkinCleansing Soothing Wet Peel-off Mask

Peel off imperfection.

5

SkinCleansingSoothing Wet Peel-off Mask“Leave behind the traces of a stressful day.”

Key Benefits: – High wear comfort– Fast drying process – Good rub-off resistance– Easily peeled off without any skin irritation– Velvety smooth touch feel of skin– Possibility to incorporate various actives– Facilitating longer-lasting retention of actives on the surface of skin– Increasing efficacy of active ingredients

Formulation: RR 8062

Phase Ingredient % by wt.

A

Acrylates/C10-30 Alkyl Acrylate Crosspolymer1 0.40

Hydroxyethylcellulose2 0.40

Aqua 57.78

Baycusan® C 1001 30.00

Alcohol Denat. 5.00

Dipropylene Glycol 5.00

Aminomethyl Propanol (to pH 6.0 – 7.0) 0.12

PEG-40 Castor Oil 0.50

Propyl Glycol (and) Diazolidinyl Urea (and)Iodopropynyl Butylcarbamate

0.80

100.00

Raw materials: 1 Carbopol® Ultrez 21, Lubrizol. 2 Natrosol™ 250 HHR, Ashland.Processing: At room temperature, add all ingredients except Aminomethyl Propanol one by one while mixing. Then, add Aminomethyl Propanol to pH 6.0 – 7.0 while mixing until homogeneous.

7

8

SkinConditioning – for flawless make-up and easy removal day after day.

An excellent appearance is particularly important to most women. And thatnaturally includes their make-up. Perfect make-up depends on well-prepared,flawless skin. Yet this is often hard to achieve, and removing make-up after astressful day is nearly always an annoying job – especially when time is tight.

That’s why our innovative polymers Baycusan® C 1000 and Baycusan® C 1005 are designed to enable perfect make-up every morning. They effec-tively fade out skin imperfections and have great sensory properties. Baycu-san® C1000 will let make-up last longer while Baycusan® C1005 will provide a matte finish on the skin.

After a stressful day, Baycusan® C 1004 allows a woman to remove hermake-up quickly and gently with nothing but warm water – made possible byour SkinConditioning formulation line!

– SkinConditioning Anti-Pollution Water– SkinConditioning Mattifying Cream– SkinConditioning Anti-Pollution Primer– SkinConditioning EasyClean Primer– SkinConditioning Make-up Primer Spray

Even out imperfection.


SkinConditioningAnti-Pollution Cosmetic Water“For a well-balanced skin.”

Key Benefits: – Protects from air pollution– Smoothens & moisturizes the skin– Make-up sits better, lasts longer and is easier to remove


10


Ingredient % by wt.

Aqua 87.15


Polyquaternium-511 1.00

Glycerin 5.00

Tocopherol 0.05

PEG-50 Hydrogenated Castor Oil 0.20

Phenoxyethanol 0.60

100.00

Raw materials: 1 Lipidure®-PMB, NOF Corporation.Processing: At room temperature, add all ingredients one by one while mixing. Homogenize if necessary.

11

SkinConditioningMattifying Cream“For a shine-free complexion with velvety skin touch.”

Key Benefits: – Shine reduction– Skin breathability– Visible reduction of fine lines– Matte finish– Dry, powdery & natural feel



A

Aqua 65.45

Disodium EDTA 0.10

Glycerin 4.00

Xanthan Gum 0.30

Propylene Glycol 3.00

B

Glyceryl Monostearate 0.75

Polyglyceryl-6 Isostearate1 0.40

PEG-100 Stearate 0.40

Cetearyl Alcohol 0.40

Cetyl Alcohol 0.40

Polysorbate 80 0.40

Squalane 2.00

Cyclopentasiloxane (and) Cyclohexasiloxane2 2.00

Dimethicone3 2.00

12


Raw materials: 1 Plurol® Isostearique, Gattefosse. 2 Xiameter® PMX-0345 Cyclosiloxane, Dow Corning. 3 Xiameter® PMX-200 SILICONE FLUID 50CS, Dow Corning. 4 Algisium® C, Exsymol. 5 Alistin®, Exsymol. 6 Simulgel™ EG, Seppic. 7 Euxyl® PE9010, Schülke & Mayr. 8 Euxyl® K220, Schülke & Mayr. Processing: Add water in the main beaker. Premix Xanthan Gum with Glycerin and Propylene Glycol, then add them to the water while mixing. Heat to 70 °C and mix until phase A is homogeneous. Com-bine ingredients of phase B together. Mix and heat to 60–70 °C until it is clear. Add phase B to phase A while mixing. Stop heating. Cool batch to 40 °C. Add ingredients of phase C one by one to phase A + B while mixing. Add phase D to phase A + B + C.


C

Methylsilanol Mannuronate4 5.00

Decarboxy Carnosine HCL5 0.30

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (and) Isohexadecane (and) Polysorbate 806 2.00

Phenoxyethanol (and) Ethylhexlglycerin7 1.00

Ethylhexylglycerin (and) Methylisothiazoline8 0.10

DBaycusan® C 1000 5.00


100.00

13

SkinConditioningAnti-Pollution Primer“Anti-pollution barrier for a healthy skin.”

Key Benefits: – Make-up long-lasting– Anti-pollution




A

Aqua 72.25

Disodium EDTA 0.20

Ammonium Acryloyldimethyltaurate/VP Copolymer 1.50

B

Titanium Dioxide (and) Silica1 1.00

Kaolin 0.30

Microcrystalline Wax 0.25

C

Dimethicone2 5.00

Polysorbate 20 1.00

PEG-120 Methyl Glucose Dioleate 2.00

Cyclopetasiloxane (and) PEG/PPG-18/18 Dimethicone3 4.00

Dimethicone and Dimethicone Crosspolymer4 2.00

Phenoxyethanol (and) Ethlhexylglycerin 0.50

DAlcohol Denat. 5.00


100.00

Raw materials: 1 Eusolex® T-AVO, Merck. 2 Dow Corning 200 Fluid 5 cst, Dow Corning. 3 Dow Corning 5225C Formulation Aid, Dow Corning. 4 Dow Corning 9041 Silicone Elastomer Blend, Dow Corning.Processing: Phase A should be pre-dispersed at 60–70 °C and stirred. Phase B is added to phase A at 60–70 °C while stirring. Phase C is pre-dispersed at 60–70 °C, and then added to phase A + B. Then homogenize the mixture phase A + B + C for at least 15 minutes. Add phase D and phase E when the temperature is below 45 °C, keep stirring until phases are homogeneous.

15

16

SkinConditioningEasyClean Primer“The fast track to perfect make-up – and back.”

Key Benefits: – Make-up long-lasting – Easy-to-wash off using only warm water– No need for make-up remover




A

Aqua 68.18

Dipropylene Glycol 6.00

Disodium EDTA 0.20

Ammonium Acryloyldimethyl Taurate/VPCopolymer 2.00

B

Titanium Dioxide (and) Silica1 1.00

Iron Oxide Yellow 0.05

Iron Oxide Red 0.02

Kaolin 0.30

C

Microcrystalline Wax 0.25

Dimethicone2 5.00

Polysorbate 80 1.00

PEG-120 Methyl Glucose Dioleate3 2.00

DPhenoxyethanol (and) Ethylhexylglycerin4 0.50

Alcohol Denat. 6.00

E Baycusan® C 1004 7.50

100.00

Raw materials: 1 Eusolex® T-AVO, Eusolex. 2 Dow Corning® 200 Fluid, Dow Corning. 3 Glucamate TM DOE-120, Lubrizol. 4 Euxyl® PE-9010, Schuelke & Mayr.Processing: Phase A should be pre-dispersed at 60~70 °C and stirred. Phase B is added to phase A at 60~70 °C while stirring. Phase C is pre-dispersed 60~70 °C, and then added to phase A + B. Then homogenize the mixture phase A + B + C for at least 15 minutes. Add phase D and phase E when the temperature is below 45 °C, keep stirring until phases are homogeneous.

17

18

SkinConditioningMake-up Primer Spray“Smoothing the way for perfect make-up.”

Key Benefits: – No tacky afterfeel– Quick drying– Line filling– Soft focus line blurring– Make-up long-lasting




A

Aqua 63.00

Glycerin 1.00

Potassium Sorbate 0.10

Sodium Benzoate 0.20

Acrylates/C10-30 Alkyl AcrylateCrosspolymer1 0.25

Triethanolamine 0.25

B

Diisopropyl Adipate2 6.00

PPG-2 Myristyl Ether Propionate3 3.00

Isoamyl Laurate4 6.00

C Isododecane (and) Polysilicone-115 10.00

DButylene Glycol 5.00

Chlorphenesin 0.20


100.00

Raw materials: 1 Pemulen® TR-2, Lubrizol. 2 Dermol DIA, Akzo. 3 Crodamol™ PMP, Croda. 4 Radia 7750, Brenntag. 5 Gransil PC-12, Grant.Processing: Prepare the water phase. Dissolve ingredients of phase A in deionized water. Mix until uniform. In a separate vessel, combine phase B ingredients. Mix until uniform and add to phase A. Add phase C. Mix very vigorously to disperse. Homogenization may be used. Combine phase D (heat lightly if needed) and add to main batch. Add Baycusan® C 1000. Homogenize. Mix until uniform. Check pH. If necessary, adjust pH to 6.0 – 6.5.Additional info: Cold process, sprayable.

19

SkinTreatment – gentle support for perfect skin.

The state of our skin impacts greatly on whether we feel good or not. Peoplesuffering from acne, for example, don’t feel comfortable in their skin and aregrateful for effective help. At the same time, a good many others are worriedabout the right daily protection from the sun as they want to delay their skin’saging process for as long as possible.

Baycusan® provides the right solution for both needs. Our versatile film-former Baycusan® C 1000 not only improves the efficacy of moisturizing, anti-wrinkle, whitening and anti-acne agents, it also boosts the sun protection factor in BB creams. And to make things as comfortable as possible, our polyurea powder Baycusan® C 1005 provides outstanding sensory properties for a smooth-feeling skin – made possible by our SkinTreatment formulation line!

– SkinTreatment Moisturizing Cream– SkinTreatment Anti-Wrinkle Cream– SkinTreatment Whitening Fluid – SkinTreatment Anti-Acne Cream– SkinTreatment Anti-Aging BB Cream SPF 20

Ward off imperfection.

21


SkinTreatmentMoisturizing Cream“Hydrate your skin!”

Key Benefits: – Long-lasting and boosting of hyaluronic acid efficacy– Skin leveling & breathability– Immediate visible effect on fine lines



A

Aqua 68.60

Glycerin 3.00

Pentylene Glycol 2.00

Phenoxyethanol (and) Ethylhexylglycerin 1.00

Sodium Hyaluronate1 0.15


Xanthan Gum2 0.25

Raw materials: 1 Hyaluronic Acid Na-Salt 1.5-1.8 MDa, GfN. 2 Keltrol® CG-SFT, Kelco. 3 Abil® 350, Evonik.Processing: Prepare the water phase (phase A): dissolve Glycerin and Pentylene Glycol in deionized water (70 °C). Add Sodium Hyaluronate under intensively stirring, then add polymers (Ammonium Acryloyldimethyltaurate/VP Copolymer, Xanthan Gum) and stir intensively until the polymers are fully dispersed. Phase A is heated to 75–80 °C under stirring. Phase B is mixed in a separate vessel and heated to 75–80 °C. When the two phases are uniform, phase B is added to phase A under continuous mixing. The emulsion is then homogenized. At 38 °C Citric Acid solution is added for pH-value adjustment, then Panthenol is added under stirring. Baycusan® C 1000 is slowly added and mixed. Cool the emulsion to 25 °C.


B

Arachidyl Alcohol (and) Behenyl Alcohol (and)Arachidyl Glucoside 3.00

Myristyl Alcohol (and) Myristyl Glucoside 2.00

Sodium Stearoyl Lactylate 0.50

Propylheptyl Caprylate 2.00

Helianthus Annuus Seed Oil 2.00

Simmondsia Chinensis Seed Oil 2.00

Isohexadecane 3.00

Pentaerythrityl Distearate 1.00

Behenoxy Dimethicone 1.50

Dimethicone3 0.50

Tocopheryl Acetate 0.50

C Citric Acid (and) Aqua (25 wt. % sol.) 0.30

D Panthenol 1.00


100.00

23


SkinTreatmentAnti-Wrinkle Cream“Try to stay young forever.”

Key Benefits: – Boosting of retinol efficacy – Reduction of wrinkles appearance and depth– Even complexion– Excellent skin feeling



A

Aqua 66.00

Glycerin 3.00

Propanediol 2.00



Xanthan Gum1 0.20

Raw materials: 1 Keltrol® CG-SFT, Kelco. 2 Abil® 250, Evonik. 3 Oxynex® L Liquid, Merck.4 RetiStar®, BASF.Processing: Prepare the water phase (Phase A): dissolve Glycerin and Propanediol in deionised water (70 °C). Add polymers (Ammonium Acryloyldimethyltaurate/VP Copolymer, Xanthan Gum) and stir intensively until the polymers are fully dispersed. Phase A is heated to 75–80 °C under stirring. In separate vessel all phase B ingredients are mixed while heating to 75–80 °C. When phase B is uniform, add to the hot phase A while intensively stirring. The dispersed pre-emulsion is then homo-genized. Cool the emulsion to 38 °C under moderate stirring.Add slowly phase C and D to the emulsion at 38 °C and stirr furthermore for 10 min. Then Baycu-san® C 1000 is slowly added and mixed. Cool the emulsion to 25 °C.Others: – Appearance: light yellow soft cream– pH-Value: 5,50–6,00


B

Polyglyceryl-3 Dicitrate/Stearate 3.00

Glyceryl Stearate 1.00

Sodium Stearoyl Lactylate 0.50

Myristyl Myristate 1.50

Isohexadecane 2.00

Canola Oil 1.00

Propylheptyl Caprylate 3.00


Helianthus Annuus Seed Oil 2.00

Persea Gratissima Oil (and) Butyrospermum Parkii Butter (and) Elaeis Guineensis Oil 1.00

Behenoxy Dimethicone 1.50

Dimethicone2 0.50


Alcohol (and) Tocopherol (and) Caprylic/Capric Triglyceride (and) Ascorbyl Palmitate (and) Ascorbic Acid (and) Citric Acid3 0.10

C Panthenol 1.00

D Caprylic/Capric Triglyceride (and) Sodium Ascorbate (and)Retinol4

1.00


100.00

25


SkinTreatmentWhitening Fluid“Reduce signs of premature aging!”

Key Benefits: – Boosting of ascorbyl glucoside efficacy– Skin lightening– Even complexion



A

Aqua 67.10

Glycerin 2.00

Pentylene Glycol1 3.00


Sodium Hyaluronate2 0.10

Sodium Acryloyldimethyltaurate/VP Copolymer3 0.80

Xanthan Gum4 0.20

B

Glyceryl Stearate Citrate 3.00

Cetearyl Glucoside 1.00

Sodium Stearoyl Lactylate5 0.50

Myristyl Myristate 1.00

Caprylyl-Caprylate/Caprate 2.00

Squalane 2.00


Pentaerythrityl Distearate6 1.00


Alcohol (and) Tocopherol (and) Caprylic/Capric Triglyceride (and) Ascorbyl Palmitate (and) Ascorbic Acid (and) Citric Acid7 0.10

26

Raw materials: 1 Purolan® PD-LO, Lanxess. 2 Hyaluronic Acid Na-Salt 1.5–1.8 MDa, GfM. 3 Aristoflex® AVS, Clariant. 4 Keltrol® CG-SFT, Kelco. 5 Akoline SLTM, AAK. 6 Cutina® PES, BASF. 7 Oxynex® L Liquid, Merck. 8 AA2G, Hayashibara. 9 Xiameter® PMX-1503 Fluid, Dow Corning.Processing: Prepare the water phase (Phase A): dissolve Glycerin and Pentylene Glycol in deionized water (70 °C). Add Sodium Hyaluronate under intensively stirring, then add polymers (Ammonium Acryloyldimethyltaurate/VP Copolymer, Xanthan Gum) and stir intensively until the polymers are fully dispersed. Phase A is heated to 75–80 °C under stirring. In separate vessel all phase B ingre-dients are mixed while heating to 75–80 °C. When the phase B is uniform, add to the hot phase A while intensively stirring. The dispersed pre-emulsion is then homogenized. Cool the emulsion to 38 °C under stirring. Prepare phase C, dissolve Ascorbyl Glucoside into the cold water. Then slowly add NaOH solution under stirring. Add slowly phase C to phase A + B at 38 °C and stir furthermore for 10 min. Add additional NaOH solution to adjust the pH-value, then Panthenol and Dimethiconol (and) Dimethicone are added under stirring. Then Baycusan® C 1000 is slowly added and mixed. The emulsion is cooled to 25 °C.Others: – Appearance: white soft fluid-cream– pH-Value: 6,50 +/- 0,25


C

Ascorbyl Glucoside8 2.00

Aqua 5.00

Sodium Hydroxide (18 wt. % sol.) 1.20

D Sodium Hydroxide (18 wt. % sol.) 0.50

E Panthenol 1.00

F Dimethiconol (and) Dimethicone9 0.50

G Baycusan® C 1000 5.00

100.00

27


SkinTreatmentAnti-Acne Cream“What is acne?”

Key Benefits: – Efficacy improvement of the anti-acne serum: significant reduction of

lesion size and inflammation– Longer-lasting retention of the salicylic acid on the surface of human skin



A

Aqua 44.90

Disodium EDTA 0.10

Allantoin 0.25

Glycerin 3.00

Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate 0.25


B

Cyclopentasiloxane (and) Cyclohexasiloxane1 5.00

Isododecane 5.00

Caprylic/Capric Triglyceride 5.00

Isododecane (and) Polysilicone-112 8.00

Polysorbate 20 1.00

Polyacrylamide (and) C13-14 Isoparaffin (and) Laureth-73 3.00

28

Raw materials: 1 Xiameter® PMX-0345 Cyclosiloxane Blend, Biesterfeld. 2 Gransil PC-12, Grant Industries. 3 Sepigel® 305, Seppic. 4 Super Refined™ Arlasolve™ DMI, Croda. 5 Drago-Beta-Glucan,Symrise. 6 Actiphyte® of Tea Conc. BG50P, Active Organics, Inc.Processing: Add phase A ingredients in main vessel at room temperature sequentially, as listed. Mix with rapid agitation until thick and uniform. In separate vessel, combine phase B ingredients. Mix until uniform. Add to phase A. Prepare phase C by combining all ingredients except Ammonium Hydroxide. Mix until uniform and clear. Add Ammonium Hydroxide. Add to main vessel. Adjust pH 4.0 – 4.5 if necessary. Add phase D and E and mix until homogeneous.


C

Salicylic Acid 2.00

Butylene Glycol 5.00

Dimethyl Isosorbide4 5.00

Bisabolol 0.50

PPG-5-Ceteth-20 3.00

Ammonium Hydroxide 0.50

D

Aqua (and) Butylene Glycol (and) Glycerin (and) Avena Sativa (Oat) Kermal Extract5 2.00

Glycerin (and) Aqua (and) Camellia Oleifera Leaf Extract6 0.50


100.00

29

SkinTreatmentAnti-Aging BB Cream SPF 20“Superior care for beautiful skin.”

Key Benefits: – UVA/UVB protection– Moisturizing– Anti-Aging– Brightening/Illuminating

– Soothing– Nourishing– Soft-focus effect– Radiance


Raw materials: 1 Euxyl® PE 9010, Schuelke & Mayr. 2 Dermofeel® SL, Straetmans. 3 Montanov™ 202, Seppic. 4 Soft-Tex® White Titanium Dioxide C47-7756, Sun Chemical. 5 Soft-Tex® Brown Iron Oxide C33-7715, Sun Chemical. 6 Soft-Tex® Yellow Iron Oxide C33-7773, Sun Chemical. 7 LexFeel® D5, Inolex. 8 HerbEx™ Korean Ginseng, BioSpectrum. 9 Vivillume™, Lonza. 10 Aquaxyl™, Seppic.Processing: Prepare the water phase. Dissolve ingredients of phase A in deionized water (80 °C).Add Sodium Hyaluronate under intensively stirring, and then add ingredients of phase B and stirr intensively until everything is fully dispersed. The water phase is heated to 80–85°C under stirring.In a separate vessel, the oil phase C is weighted and mixed while heating to 85 °C until the UV-Filters are dissolved and the pigments are fully dispersed.


A

Aqua 44.75

Glycerin 2.00

Propandiol 3.00

Phenoxyethanol (and) Ethylhexylglycerin1 1.00

Dipotassium Glycyrrhizanate 0.20

Coffein 0.50

Niacinamide 1.00

Sodium Stearoyl Lactylate2 0.50

B

Sodium Hyaluronate 0.05

Sodium Acryloyldimethyltaurate/VP Copolymer 0.60

Xanthan Gum 0.20


30

Processing: When the phases are uniform, the oil phase is added to the water phase under continuous mixing. The emulsion is homogenized at 80 °C – 85 °C for 15 minutes. Cool batch under stirring to 35 °C. Add in succession all ingredients of phase D. Baycusan® C 1000 is slowly added and mixed. Then sprinkle Baycusan® C 1005 under stirring. Finally parfum is added. The tinted emulsion is cooled to 25 °C. Check pH. If necessary, adjust pH to 6,0–6,58. Check pH. If necessary, adjust pH to 6,0–6,5.Additional info: Paraben free. In vivo SPF (International test method on 5 volunteers) = 22.6.In vitro UVA SPF (Colipa test method. 2011) = 7.7.


C

Arachidyl Alcohol (and) Behenyl Alcohol (and) ArachidylGlucoside3 2.50

Glyceryl Stearate 1.00

Ethylhexyl Methoxycinnamate 3.00

Bis-Etylhexyloxyphenol Methoxyphenyl Triazine 2.00

Diethylamino Hydroxybenzoyl Hexyl Benzoate 2.00

Etylhexyl Triazone 3.00

Iron Oxide4 3.00

Iron Oxide5 0.35

Iron Oxide6 0.35

Dicaprylyl Carbonate 5.00

Neopentyl Glycol Diheptanoate (and) Isododecane7 5.50


D

Cyclopentasiloxane (and) Dimethiconol 3.00

Butylene Glycol (and) Aqua (and) Panax Ginseng Root Extract8 2.00

Panthenol 0.50

Aqua (and) Sterlitza Nicolai Seed Ari Extract9 2.00

Xylitylglucoside (and) Anhydroxylitol (and) Xylitol10 2.00

E



Fragrance 0.50

100.00

31

Covestro Deutschland AGBusines UnitCoatings, Adhesives, SpecialtiesD-51365 [email protected]

This information and our technical advice – whether verbal, in writing or by ways of trial – are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. The information is provided by Covestro Deutschland AG without assumption of any liability. If any of the above mentioned regulations change after the date of declaration, this decla-ration is no longer valid. Covestro Deutschland AG will strive to keep this information up-to-date. Our advice does not release you from the obligation to verify the information provided – especially that contained in our safety data and technical information sheets –, to check for updates of any information provided by us and to test our products as to their suitability for the intended process-es and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.Edition: 2016-03 · Order-No.: COV00080279 · Printed in Germany

ni venng ti perfect skin for you - biotechnologia.pl · baycusan® c 1000 not only improves the...

Documents