new work data selectmea.nipponpaint-autorefinishes.com/wp-content/uploads/... · 2019. 5. 9. · 11...
TRANSCRIPT
-
CALIBRATION & MEASUREMENT
Take the calibration of the spectrometer01
Take the colour readingNote: Polish the car before reading
02
WORK DATA SELECT
Move to “WORK DATA SELECT”03
Select work spaceNote: Clear existing data by clicking “DATA CLEAR”
04
SEARCHING
Move to “SEARCH”05
Select “COATING TYPE” & “CAR MAKER” Type “COLOUR CODE”Note: “COATING TYPE” is mandatory.
06
Click “TARGET READING”07
Click “DATA READING”08
Click “OK”09
10
Start preferably by selecting the first formulation 11
CALCULATION & WEIGHING
12
Click “WEIGHING”Note: Correction can be done before weighing by clicking “CALCULATION”
13
Click “WEIGHING”14
Click “ZERO RESET”15
Place container on weighing scale16
Pour toners sequentially as per formulation & then click "NEXT"17
Click “COMPLETE”, then click “Yes”18
Spray the mixed colour & Dry19
Click “READING OF TRIAL COLOUR”20
Click “DATA READING”21
Click “OK”22
If colour is good, input the required quantity (If correction is required, go to 25.)23
Click “FINAL WEIGHING”24
CORRECTION
If correction is required again, click “ ” to move C1 & Click “CALCULATION”25
26 Go to step 13
27 Correction can be repeated till the desired accuracy is achieved
01
02
03
04
05
06
07
08
09
Click “SEARCH”10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
REGISTRATION TO USER DATABASE
Move to “USER DATABASE”28
Type required information29
Click “REGIST”30
28
29
30
DATA UPDATE
Move to “DATA UPDATE”31
Click “ONLINE UPDATE” to get latest program & formulation data32Note: Do not work on the computer while the update is in progress
31
32
Move to “CALCULATION - SIMULATION”
Note: Calibration should be done once a day
• Select “Take reading”.
• Place the spectrometer onto car body and click “operate”.
• Click “operate” to complete reading. (Read color 4 times)
01
03
05
0611
07
10
08
09
12
23
13
20
14
18
15
17
25
28
29
30
31
32
24
04
02
• Select “Calibrate” and click “operate”.
• Place the spectrometer onto Zero Box and click “operate”.
• Place the spectrometer onto White Plate and click “operate”.
Customer Support : [email protected]