New Life Steel StructuresAN ISO 9001:2008 CERTIFIED COMPANY

Factory sheds, Warehouses, Thermal power projects, Air craft hangers, Vehicle stands,

Community halls, Canopies, Green houses, Site Offices etc.

Features Of Pre Engineered Buildings :

Application :

New life steel prefabricated steel buildings are designed to suit the demands of their

customers. They provide speed in delivery and erection, flexibility in expansion and with

stand severest weather conditions.

We strive to provide one stop solution for all building requirements. To do so our product

range includes Mezzanine Floors, Canopies, Portable Cabins, Stairs, Windows, and

Doors etc. We have been in this field for more than 19 years and have gained confidence to

meet any sophisticated jobs.

New life steel buildings are available in large spans, multi spans, lean to roof at all required

heights and side cladding. New life can also provide insulation and variety of accessories

such as Skylights, Roof vents, Louvers, Sliding doors and Windows.

Our customer has large choice of sheet material to choose and suit their budget and

requirement such as Pre-coated sheets, GI sheets, Fiber sheets, and AC sheets

1) No welding is required at site 2) These sheds can be resold. 3) Dispensable and

relocatable 4) Aesthetically superior and most economical 5) Time saving in completion of

project

Features Of Pre Engineered Buildings :

Application :

New Life Steel Structures

ROOF SHEETSROOF SHEETS

CLEAR SPAN

MULTISPAN( 2 Interior Columns )

MULTISPAN( 3 Interior Columns )

ROOF SYSTEM MONO SLOPE

TURBO VENTILATOR

S LOUVERS

TYPICAL COLUMN “Z” SECTION “C” SECTIONTYPICAL RAFTER

New Life Steel Structures

A Standard New Life Steel building system is made up of primary members, connections, roof

sheeting, wall sheeting, sheeting fasteners, sealer, closures, ridge caps, flashing and trim,

gutters and downs pouts

Primary structural framing shall include the transverse rigid frames, lean-to-rafters and

columns, canopy rafters, interior columns (beam and column frames), bearing frame rafters

and corner columns and endwall wind columns.

Secondary structural framing shall include the purlins, grits eavestruts, wind bracing, flange

bracing, base angles, clips and other miscellaneous structural parts.

All structural members shall be cleaned by wire brushing to remove dirt, grease, oil and loose

mill scale and given one shop coat of red oxide, air drying.Any additional finish painting is not

included in New Life Steel scope.

A. All field connections shall be bolted.

B. Primary bolted connections shall be furnished with high strength bolts confirming to the

physical specifications of ASTM 325 (or equivalent).

C. Secondary bolted connections shall be furnished with machine bolts confirming to the

physical specifications of ASTM 3207 (or equivalent).

A. Members fabricated from plates shall have flanges and webs joined on one side of the web by

submerged welding process having a minimum yield strength 345 mpa.

B. Members fabricated by cold forming process shall have a minimum yield strength of 345 mpa

C. Members fabricated from hot rolled structural shapes shall have a minimum Yield strength of

250 mpa.

D. Rod and angle bracing shall have a minimum yield strength of 250 mpa.

E. Roof and wall cladding shall confirm to physical specifications have a minimum Yield strength

of 345 mpa.

F. All other miscellaneous secondary members have a minimum yield strength of 250 mpa.

1. Primary Members

2. Secondary Members

3. Paint

3. Connections

5. Physical Specifications Of Structural Members

Main load-bearing frame

Secondary frame

Roofing

system

Facadesystem

Accessories

Ridge Ventilator

Roof Jack

Eave Strut

Purlin

Rafter

SidewallGirt

SidewallSteel Line(Outside Faceof Girt)

Gable Column

Gable Girt

EndwallSteel Line(Outside Faceof Girt)

Main Frame Column

Door

Wall Cladding

Downspout

Gutter

Door

Aluminium Window

Louver

VerticalFascia

Roof Curb

Skylight

Roof Cladding

Sheet Colours

New Life Steel Structures

6. Roof Sheeting / Wall Sheeting

7. Sheeting Fastners

8. Sealer / Rope Seal

Roof and wall panels shall be of 26 gauges thick profiled galavalume / galvalume color

coated / gi colour coated steel sheeting. In case of prepainted galvalume panels, the

exterior face is prepainted galvalume panels, the exterior face is prepainted with 1 mil.

thick factory applied polyester paint. The interior face is prepainted with 0.5 mil. thick

factory applied polyester paints. each panel shall be white / grey. Other materials,

thickness and coating are available upon request.

Standard fastners shall be self tapping sheet metal screws with metal and neoprene

washers. All screws shall have hexagonal heads.

This is to be applied at all side laps and end laps of roof panels and around self flashing.

9. Closures / Filler Strips

10. Ridge Cap

11. Flashing and Trim

12. Eave Gutters and Downspouts

Sold or closed cell e.t.p. (ethylene polypropylene terpolymer) closures matching th

profile of the panel shall be installed.

A formed panel matching materrial colour, slope and profile.

Flashing and / or trim shall be furnished at the rake, corners, and eaves framed

openings and wherever necessary to provide weather tightness and finished

appearance.

Eave gutters shall be box shaped, colour coated, 0.5mm nominal thickness (26 gauge)

galvanized steel. The outside face of the gutter shall be supported with colour coated

0.5mm nominal thickness (26 gauge) straps to the eave member at a maximum

spacing Of 0.2 m.

New Life Steel deck section is fixed on welded plate girder

primary and secondary beams.

Average 60 mm thick concreting is done on it to ensure

smooth top surface.

This ensures dry construction, fast speed and high strength.

New Life Steel has been evolving durable, aesthetical and yet economical industrial buildings by using the ever

dependable FINK / N trusses and WIDE FLANGE or H-SECTION steel columns.

It's a combination of solid web columns & open web lattice roof grinders.This systems is the economical alternative

for large clear spans.

Open Web Lattice Structures

New Life Steel Structures

G.I. Deck & MezzanineG.I. Deck & Mezzanine

Open Web Lattice Structures

Manufacturing

Shop drawings are sent to the factory for fabrication; manufacture all structural members and accessories for complete installation.

Manufacturing

Erection

The pre-fabricated structures or space frames are assembled on the ground and installed using crane or scaffolding. The structure will undergo full and complete final inspection after installation.

Erection

All structures are designed and manufactured strictly according to ensuring maximum safety and economy by making optimum use of quality raw materials and sheets.There is laboratory to check the raw materials to verify the standard of material supplied to us as well as to ascertain the quality of manufactured steel structures at various stages. The lab is equipped with all necessary equipments.

1. All dimensional & weight checking as per ISI specification is carried out at our factory.2. Quality manual is maintained as per requirement.3. All welders are tested & certified welders

ISI specifications

* All raw material required for the product are as per ISI specification

Quality Control SystemsQuality Control Systems

Engineering

This stage consists of a compute structural analysis to provide all the calculations that satisfy code requirement

Engineering

C & Z Purlins

C & Z purlins are revolutionary products which have been technically approved and accepted all over the world by architects and engineers. Its extraordinary shapes increases its strength and load taking capacity. Usage of Z purlins results in cost saving upto 50% in structural steel as compared to traditional rolled section (Like Angle / Channel / Beams) and hollow sections like (Round Pipes / SHS / RSH.) it is available in customised lengths, Thus there is no need of any fabrication, cutting or welding at the site. Hence there is no material wastage or fabrication cost. It is also available is various thickness and sizes. The customers also has the option to buy high quality Galvanised Z purlins.

• Longest life• Light Weight - Highest Strength• Corrosion Resistant• Lower Maintenance Cost• Longer Spans - Lower No. of Pillers• Easy Installation

BENEFITS

C & Z Purlins

Production Facilities

PALGHAR PLANT : This state of art plant is located at diwan and sons industrial state (district thane), which is one of the epicenters of our manufacturing facilities.Fabrication of steel structure is supervised by experienced staff and certified welders.

We have excellent work force and enough space to handle any amount of work.

Production Facilities

Design

Our experienced engineers work closely to design pre - fabricated structure, space frames as per owner's requirement & site conditions

Design

New Life Steel Structures

Mumbai : 1, Shivdarshan, Radhabai Mhatre Road, Near Vithal Mandir, Dahisar (W), Mumbai - 68.Telefax. : (022) 28933330, 28923558, 28919151

Website : www.newlifesteel.net / www.newlifesteel.comSales Enquiry : newlifesteel@gmail.com

Delhi : B-6, Amba Apartment, Plot No. 5, Sector-10, Dwarka, New Delhi-75Sales Enquiry : newlifesteel@gmail.com

Ahemdabad : 304,shivdeep Avenue, 2nd Floor, Opposite Mony Hotel, Ishanpur, Ahmedabad-382443Sales Enquiry : newlifesteel@gmail.com

Raipur : C-7, Mahavir Nagar, New Purena, Raipur - 482006 • Sales Enquiry : newlifesteel@gmail.comPalghar Factory Unit I : 103-109 Diwan & Sons Ind. Estate Village, Aliyali, Palghar (W), Dist Thane. Tel. : (02525) 250024Palghar Factory Unit II : Plot No. 18, Survey No. 132 / 3 / 4 / 6, Viva Raj Prabha Industrial City, Taluka-Palghar (E), Dist.-Thane.

Tel. : (02525) 323767

New Life Steel Structures