new faculty of telecommunications, computer science...

OFFER SCIENTIFIC RESEARCH

FOR INDUSTRY

FACULTY OFTELECOMMUNICATIONS, COMPUTER SCIENCE AND

ELECTRICAL ENGINEERING

Free promotional material

Offer Scientific ResearchFaculty of

Telecommunications, Computer Science and Electrical Engineering

for Industry

UTP University of Science and Technologyin Bydgoszcz

Inkubator Innowacyjności

Bydgoszcz 2014

3Offer Scientific Research Faculty of Telecommunications,Computer Science and Electrical Engineering for Industry

INSTITUTE OF TELECOMMUNICATIONSFaculty of Telecommunications, Computer Science and Electrical EngineeringUTP University of Science and Technology| +48 52 3408038 | wtie.utp.edu.pl | [email protected]. Prof. S. Kaliskiego 7, 85-796 BYDGOSZCZ

Table of Contents

Offer of Specialized Labs for Industry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Measurement laboratory of electric and data communication systems . . 3 Laboratory of microprocessor controllers, programmable systems and building management and control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Laboratory of computer networks and signal processing systems . . . . . . 6 Laboratory of creating and measurements for modern data communication services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Designing of Broadband Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Cisco Academy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Network Cabling Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Automation Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Systems for Telecommunications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Communication Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Design of Specialized Electronic Circuits and Systems . . . . . . . . . . . . . . . . . 20 Electric Energy Quality Analysis in Distribution and Transmission Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Simulation Analysis of Operating Electrical Systems . . . . . . . . . . . . . . . . . . . 23 Services for Green Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Mathematical Modelling and Computer Simulation of Electrical and Electromechanical Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 EMC Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Examination of Medium Voltage Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Thermal Imaging testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Optimization of the Purchase and Effectiveness of Electricity Consumption in a Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Measurement Performanceand Development of Power Quality Measurement Results in the Fields of Electricity Distribution in a Company According to Bs En 50160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Offer of Specialized Labs for Industry

Measurement laboratory of electric and data communication systems

Laboratory offer:

ĥ Teletransmission measurements in optical, copper and wireless networks within to 5 Gbit/s band ĥ Research and equipment testing for data communication and telecommunication systems ĥ LAN, MAN, WAN networks measurements implemented in different technologies ĥ Evaluation of the quality of services in ICT networks ĥ Comprehensive measurements of optical systems ĥ Wireless sensor networks measurements ĥ Designing of electronic circuits ĥ Testing of electronic circuits ĥ Commissioning of electronic circuits ĥ Programming of electronic circuits ĥ Designing of communication protocols

Laboratory Equipment:

ĥ Real-Time Spectrum Analyzer (with adapters and probes) ĥ RF Spectrum Analyzer in real-time (along with a set of measuring antennas) ĥ Optical spectrum analyzer for extended wavelength range ĥ The dual-channel arbitrary waveform generator 20 GS/s ĥ Sources of voltage and current with a wide range of current-voltage regulation ĥ Laser wavelength source of the narrow and broad spectral characteristics ĥ Laser source of white light ĥ A set of probes for the differential current and high-voltage ĥ Fiber optic welder with optoelectronic equipment ĥ The optical reflectometer with dispersion measurement ĥ SDH tester with NGSDH option ĥ Signal level measuring equipment for signals in the range 30 MHz - 5 GHz ĥ Frequency meter ĥ Sonometer ĥ High-resolution laboratory multimeters to work with a PC ĥ Software for designing electronic circuits

Contact:Piotr Kiedrowski 52 3408338 [email protected]

54 Offer Scientific Research Faculty of Telecommunications,Computer Science and Electrical Engineering for Industry


Laboratory of microprocessor controllers, programmable systems and building management and control

Laboratory offer:

ĥ Designing of electronic devices using modern processors and microcontrollers

ĥ Testing and measuring of electronic systems ĥ Designing real-time embedded systems ĥ Design of human-machine interfaces ĥ Designing of modern telecommunication sys-

tems modules ĥ Studies in the field of mathematical modeling

of concurrent and distributed control systems ĥ Synthesis and optimization of concurrent

digital systems ĥ Modeling and simulation of concurrent digital

microsystems ĥ Computer aided design of digital systems

implemented in ASICs systems ĥ Automation of industrial processes ĥ Designing of specialized DSP systems ĥ Designing of specialized microprocessor con-

trollers (hardware, software) ĥ Developing and designing solutions for build-

ing automation and intelligent buildings


ĥ Oscilloscope 200 MHz ĥ Oscilloscope 1 GHz ĥ High-resolution laboratory multimeters to

work with a PC ĥ Power supplies with adjustable voltage in

ranges 0-30 V and 0-60 V ĥ Function generator 20 MHz, 100 MHz, 200 MHz ĥ Position control system ĥ Two-axis positioning module for compact con-

trollers with the possibility of linear and axial interpolation

ĥ The servo motor

Contact:Łukasz Zabłudowski 52 3408396 [email protected]

ĥ Multi-turn absolute encoder 25 bit with cables for motors

ĥ Spartan and Virtex FPGA boards ĥ Prototype boards cooperating with KEIL soft-

ware packages and ULINK2 adapter, ĥ ARM processor board set ĥ Programmable laboratory test kit consisting

of production modules from National Instru-ments using LabView language

ĥ Laboratory for building automation systems operating in the KNX standard

ĥ Laboratory for testing BMS (Building Manage-ment System) implemented in Kieback & Peter technology standard

ĥ Gigabit Ethernet camera operating in IEEE 802.3 1000baseT standard

ĥ High-resolution camera lens up to 5 megapix-els

ĥ The intelligent auto focus camera ĥ Software image processing, computer vision

system responsible for acquisitions from all sources including USB, FireWire, GigE Vision (Direct-Connect), and analog frame grabbers and CameraLink





Laboratory of computer networks and signal processing systems

Laboratory offer:

ĥ Designing of modern equipment (fixed and mobile) using the technique for converting video and audio signals

ĥ Designing of telecommunications equipment complying with international recommendations ĥ Studies for complex devices and solutions using artificial intelligence to recognize objects in the

automation ĥ Studies in the design and implementation of modern surveillance systems using computer vision ĥ Remote metering systems of various electrical and non-electrical parameters ĥ Telecommunications equipment used to defend computer systems against network attacks ĥ Design of support systems for the purposes of medical diagnosis


ĥ Modern Network infrastructure for LAN/WAN supporting IPv6 ĥ Laboratory set for the acquisition of 3D video signals along with a 3D rotating scanner ĥ Laboratory set for the 3D signal processing ĥ Laboratory set for the 2D signal acquisition and processing ĥ Computer laboratory stand with optical microscope for inspection of materials and images ĥ Laboratory stand for video system design, operating in real time ĥ Laboratory stand for audio system design, operating in real time ĥ Design sets in FPGA technology (Xlinx Spartan) ĥ Laboratory stand for designing of embedded systems in real-time ĥ Control measurement device for protocol analysis in telecommunication networks ĥ Arbitral generator 240 MHz ĥ Thermal imaging camera

Contact:Łukasz Saganowski 52 3408373 [email protected]





Laboratory of creating and measurements for modern data communication services

Laboratory offer:

ĥ Research in the field of innovative services (development and testing): Î Operating in distributed networks - in particular based on the paradigm of SOA (Service Oriented Architecture)

Î Broadly defined services for next generation networks (NGN / IMS) in the use of modern sensors (eg EEG, Kinect) and architectures (OpenIMS, Mobiscents)

Î New applications of programmable wireless nodes (SDR) ĥ Research in the field of network simulation and service systems (WAN, LAN, LTE, WiMAX) ĥ Research in the field of analysis / performance optimization in IP networks (Ethernet, WLAN, 4G)

Î research on architectures, protocols, network mechanisms (eg quality of service, security, mobility, multimedia)

ĥ Evaluation of the quality of services in ICT networks (using real wireless terminals, traffic generation) Î Including measu rement of SLA in ICT networks Î Study of subjective quality (QOE) services (eg web, AR)

ĥ Develop of methodologies / procedures for testing the services / network devices (eg IPTV, VoIP, etc.) Î Verification and validation of methodologies for testing network services

ĥ Piloting before implementation services - profiling services (eg IPTV), prepare / develop scripts to automate user behavior, tests


ĥ Network Infrastructure LAN/WAN ĥ Professional packet traffic generator/analyzer; 4 x 1 Gb (including audio, video, routing, security,

simulation service clients), protocols such as: MPLS, BGP, RFC 2544/2889/3918, etc. ĥ Equipment for looping motion and automatic testing of SLA. Laboratory stand for tests WiFi, WiMAX,

GSM (inside and outside) ĥ Mobile terminals ( WLAN, 3G/4G, IMS) and multimedia (including Kinect, TV) ĥ Programmable radio nodes (Software Defined Radio - SDR) ĥ I/O devices to work with the services (audio, video, EEG, ....) ĥ Professional network simulator OPNET (including Etherhet, ATM, LTE, mobility, QoS, service) ĥ Laboratory stand to create and run services in SOA technology (application servers, service creation

environment, testing with SIP traffic generator) ĥ Computing servers (cloud)

Contact:Adam Flizikowski 52 3408333 [email protected]





Designing of Broadband Networks

Cisco Academy

ĥ CCNA courses 640-801 and 640-802 (CISCO Certified Network Associate)

ĥ The certificate is well known all over the world and honorable in all network oriented companies

ĥ The course lasts for one year and consists of 4 semesters

ĥ More information: cisco.utp.edu.pl

ĥ Designing of network infrastructure ĥ Network optimization of a mitigation costs ĥ Selection of active and passive devices ĥ Estimating and predicting the telecommunica-

tions traffic ĥ Wired and wireless networks ĥ Feasibility studies ĥ Functional and utility programs

Contact:Łukasz Zabłudowski 52 3408396 [email protected]

Contact:Tomasz Marciniak 52 3408393 [email protected]





Network Cabling Certifications

ĥ Supported standards: TSB 67, TSB 95, TIA/EIA 568-B Level III; ĥ Measurment standards: TIA Cat 5E, 6, ISO 11801 Class D (2002), EN 50173 Class D (2002); ĥ Cable types: UTP, STP, ScTP, FTP.

Basic tests: NEXT, remote NEXT, PSNEXT, remote PSNEXT, ELNEXT, PSELFEXT,attenuation, reflections stability, remote ACR, PSACR, remote PSACR,length, propagation latency, impedance, resistance of DC,wire map, reflectometer TDR, Tdnext

Contact:Tomasz Marciniak 52 3408393 [email protected]





Automation Systems

ĥ Designing and creating control systems for machinery and production lines ĥ Integration of control systems of various manufacturers ĥ Remote control systems ĥ Remote measurements and data acquisition ĥ Production processes visualization ĥ Building automation systems ĥ Data acquisition systems ĥ Monitoring and remote control

Contact:Sławomir Bujnowski 52 3408394 [email protected]





Systems for Telecommunications

ĥ Designing and creating of systems for telecommunications and information technology and commu-nication applications

ĥ Telecommunication systems integrations ĥ Designing and implementation of new services ĥ Controlling systems for telecommunication devices ĥ Interfaces programming ĥ Controlling systems implementations in FPGA systems and signaling processors

Contact:Sławomir Bujnowski 52 3408394 [email protected]





Communication Systems

ĥ Designing, implementation, analysis and protocol testing ĥ Quality rating ĥ Study on compliance with the recommendations ĥ Data distribution and acquisition ĥ WSN networks ĥ Telematics measurements ĥ AMR and ADAM system

Contact:Piotr Kiedrowski 52 3408338 [email protected]



21Offer Scientific Research Institute of ElectricalEngineering for Industry20 UTP University of Science and Technology

in Bydgoszcz

Electric Energy Quality Analysis in Distribution and Transmission Networks

ĥ Measurements of physical values in power networks ĥ Development of measurement performance and registration ĥ Quality analysis of electricity in power networks ĥ Identification of power system deteriorating the quality electricity

Contact:Sławomir Cieślik 52 3408560 [email protected]

Design of Specialized Electronic Circuits and Systems

ĥ Design and realization of low-power, high speed analog and mixed (analog-digital) circuits in the CMOS technology

ĥ Measurement of electrical parameters of ultra low power electronic circuits and systems

ĥ Protection of circuits and systems against ESD effects (electrostatic discharge)

ĥ Design and application of intelligent systems and artificial neural networks and realization of such systems in hardware (ASIC VLSI, FPGA, microcontrollers)

ĥ Design and implementation of specialized, energy-efficient filters and analog-to-digital converters (ADC) in the CMOS technology

Contact:Tomasz Talaśka 52 3408189 [email protected]

INSTITUTE OF ELECTRICAL ENGINEERINGFaculty of Telecommunications, Computer Science and Electrical EngineeringUTP University of Science and Technology| +48 52 3408088 | ie.utp.edu.pl | [email protected]. Prof. S. Kaliskiego 7, 85-796 BYDGOSZCZ



in Bydgoszcz

Simulation Analysis of Operating Electrical Systems

ĥ Calculation of current, active and reactive power and voltage ĥ Short-circuit analysis including all national power system ĥ Quality analysis of electricity ĥ Analysis of the transition states in power systems ĥ Dimensions heat line calculation of electromagnetic impact on the environment

SIMULATION OF ELECTRICAL SYSTEMS WORKING IN REAL TIME

ĥ PSCAD ĥ PLS-CADD ĥ FLUX ĥ PLANS SCC INDUSTRIAL





in Bydgoszcz

Mathematical Modelling and Computer Simulation of Electrical and Electromechanical Systems

DIGITAL SIMULATORS OF ELECTROME-CHANICAL AND ELECTRICAL SYSTEMS WORKING IN REAL TIME.

Services for Green Energy

ĥ Possibility studies for generator connection to power systems ĥ Technical solutions for generator connection to power systems ĥ Electrical terminal building projects ĥ Feasibility studies for adoption of overhead power lines 110 kV for increased power capacity ĥ Experimental research cogenerating units with power system


INSTITUTE OF ELECTRICAL ENGINEERINGFaculty of Telecommunications, Computer Science and Electrical EngineeringUniversity of Technology and Life Sciences in Bydgoszcz| +48 52 3408088 | ie.utp.edu.pl | [email protected]. Prof. S. Kaliskiego 7, 85-796 BYDGOSZCZ



in Bydgoszcz

EMC Tests

RESISTANCE TEST FOR SINUSOIDAL DISORDERS WITH MEASUREMENT OF EMISSIONS BOTH RADIATED AND CONDUCTED

Measurement of resistance to sinusoidal radiated disturbances in the GTEM chamber. The system is allow-ing for generating a magnetic field with intensity 10 V/m within the frequency range 80 MHz – 1 GHz with AM 80% modulation and pulse modulation. Max size of EUT: 0,74 x 0,74 x 0,30 [m]. Size of EUT (according to normative deviation criteria: +/-3 dB): 0,60 x 0,60 x 0,30 [m]; main doors dimension: 0,48 x 0,68 [m].

The EMI measurement receiver with spectrum ana-lyzer: full compliance with CISPR-16-1-1; frequency range 9 kHz to 3 GHz.

Artificial three-phase network: type V, full compli-ance with CIPSR-16-1-2; frequency range 9 kHz – 30 MHz. Current carrying capacity of 4 × 25 A continu-ous current, 4 × 50 A for 2 minutes.

Resistance measurement on Sinusoidal conduct-ed disturbances and induced by radio frequency fields, in accordance with standard base IEC 61000-4-6 and harmonized standards.

PULSE DISORDERS RESISTANCE TESTS

ĥ ESD – IEC/EN 61000-4-2 ĥ EFT/Burst – IEC61000-4-4 ĥ Surge - IEC 61000-4-5 ĥ PQT: Fluctuations and voltage drops in AC lines

AC - IEC 61000-4-11. Fluctuations and voltage drops in DC lines – IEC 61000-4-29

ĥ Power line magnetic field resistance tests - IEC/EN 61000-4-8: maximum field intensity 40 A/m. ĥ Pulsed magnetic field resistance - IEC/EN 61000-4-9, maximum field intensity 1200 A/m.

Contact:Piotr Boniewicz 52 3408572 [email protected]

EMC Tests

TEST OF RESISTANCE TO FREQUENCY CHANGE

Analysis of 1-phase devices with network and low AC voltage in the following subranges:

ĥ 0.135 VAC (continuous load current: 37 A), the possibility to extend the voltage range up to 150 VAC while maintaining the stability of 5 kVA,

ĥ 0.270 VAC (continuous load current: 18.5 A), the possibility to extend the voltage range up to 300 VAC while maintaining stability 5 kVA

Analysis of DC-powered devices in the ranges:

ĥ 0.200 VDC (continuous load current: 26 A) while maintaining the stability of 3.5 kW,

ĥ 0.400 VDC (continuous load current of 13 A) while maintaining the stability of 3.5 kW

Conducting research in full compliance with the re-quirements of the following standards:

ĥ IEC 61000-3-2 Ed3 2005 / Ed3 A1 2008 / Ed3 A2 2009),

ĥ IEC 61000-3-3 Ed1 1994 / Ed1 A1 2001 / Ed1 A2 2005 / Ed2 2008),

ĥ IEC 61000-4-13: 2009, ĥ IEC 61000-4-14: 2009, ĥ IEC 61000-4-17: 2009, ĥ IEC 61000-4-28: 2009, ĥ Precompliance IEC 61000-4-29: 2000.

Contact:Piotr Boniewicz 52 3408572 [email protected]




in Bydgoszcz

Thermal Imaging Testing

ĥ GENERATORS ĥ TRANSMISSION LINES AND HIGH VOLTAGE LINE

FUSE ĥ IZOLATORS ĥ TRANSFORMATORS ĥ TRANSFORME AND ELECTRICAL CABINETS ĥ FUSES ĥ PINs AND ELECTRICAL CONNECTORS ĥ SWITCHES AND DISCONNECTORS ĥ BATTERY CAPACITOR

Examination of Medium Voltage Cables

POWER CABLE RESISTANCE TEST TO HEAT CYCLES SHRINKAGE FILM STUDY OF POWER CABLES (IN ACCORDANCE WITH THE REQUIREMENTS OF BS, ISO, CIGRE)





in Bydgoszcz

Optimization of the Purchase and Effectiveness of Electricity Consumption in a CompanyThe main objective of the work is to analyze the profitability of a change in the purchase of electricity consumed by the tested facilities of the company used as one of the methods of minimization of costs incurred in electricity consumption. In addition, the study indicates the possibility to increase energy efficiency in the test facility consuming the electricity. In addition, the work fills an important target for cognitive assessment of energy efficiency and provides information on applicable laws related to energy efficiency and purchasing electricity on the energy market in Poland.

United postulated:

ĥ Demonstration of the conditions that must be met by audited company to freely choose their elec-tricity supplier

ĥ Demonstration of opportunities for savings in the cost of purchasing electricity through a change in the purchase of electricity. Indication of the most beneficial from the point of view of minimizing the cost of purchasing electricity

ĥ Indication of the steps to fully participate in the energy market.

Contact:Kazimierz Bieliński 52 3408518 [email protected]



32 UTP University of Science and Technologyin Bydgoszcz

Measurement Performanceand Development of Power Quality Measurement Results in the Fields of Electricity Distribution in a Company According to Bs En 50160

The main objective of the work is to measure and assess the quality of the electricity supplied to consum-ers electrical switchgear and main point of the distribution of electricity in the enterprise. In addition, the goal of the work is to provide awerness of the consequences of exceeding the limit values of voltage, as well as on the law relating to the issues of quality of electricity in Poland.

United postulated:

ĥ Assessment of voltage electricity accordance with the requirements of BS EN 50 160 ĥ Assessment of electrical currents flowing at the designated points of measurement ĥ Indication of the steps of the investigation for the compensation of undesirable phenomena.

Contact:Kazimierz Bieliński 52 3408518 [email protected]


www.wtie.utp.edu.pl

Dział Współpracy z Gospodarkąul. Kaliskiego 7, 85-789 Bydgoszcz

[email protected]

Projekt Współfinansowany ze środków Unii Europejskiej w ramach Europejskiego Funduszu Rozwoju Regionalnego

new faculty of telecommunications, computer science...

Documents