new ctcp plate - imagewand · 2016. 5. 30. · uv-pii-type uv-ctp plate, also used as high...
TRANSCRIPT
-
WWW.HGFILM.COM.CN
华光-绿色印刷推动者华光-绿色印刷推动者
1817
Based on Huaguang UV-P plate, UVP-II is a new generation of CTcP plate to meet the market requirements for speed and efficiency. The new photosensitive layer and stable production process not only increase its sensitivity (25% higher) but also maintain the excellent performance of plate making and printing same to UV-P. UVP-II, with good developing and plate-making compatibity, is the best choice for offset packaging and commercial printing.
Technical Specification
Processing Conditions
new CTcP Plate
UV-PII-type UV-CTP plate, also used as high sensitivity PS plate.
Commercial sheetfed and rotary press printing
Electrochemically grained and anodized aluminum
0.15/0.20/0.25/0.30/0.40 mm
Blue-Green
350-460nm UV light, especially 400-410nm UV laser
40±5 mW(Cron UV-4632CI platesetter Parameter 1000 rpm)
2-98% @ 250 lpi.( The difference between plate-making equipment will be different)
main UV-CTP platesetters such as Cron,luscher,Amsky,basysPrint.
(unbaked)18 months, run length will be different when used in different conditions such as printing presses/paper/ink/printing chemicals and etc,.
Yellow light
18 months under recommended storage conditions
Huaguang PD positive PS plate developer
1:3-1:4
24±1°C
20-30s
Room temperature
50°C
100—150 ml/m2
Plate Type
Application
Substrate
Gauge
Final image color
Spectral sensitivity
Relative Sensitivity
Resolution
Applicable platesetter
Run length
Safelights
Run length
Developer
The ratio of developing solution (PD: water)
Developing temperature
Developing time
Washing temperature
Drying temperature
Replenishing Rate
The processing of UV-PII may follow UV-P processing conditions. Huaguang positive PS plate developer (PD) is recommended. Recommended conditions:
The above parameter is obtained by Cron UV-4632CI platesetter, user can change above conditions according to specific equipment.