new capacitor products - mouser electronics · new type 325, 125 °c long-life, switching-power...

1001 Rev. 50102

CORNELLDUBILIER

Your Source For Capacitor Solutions

CO

RN

EL

LD

UB

ILIE

R

YS

FC

itS

lti

New Capacitor ProductsNew Type AFK surface-mount aluminum capacitoris the best at low impedance and small size. With40 to 60% lower impedance, 30 to 50% smaller sizeand more than twice the life compared to other low-impedance aluminum SMD capacitors, the AFK also

excels at cold-temperature performance down to –55 °C.Capacitance: 3.3 µF to 6800 µF ±20% (See page 1.020)Voltage: 6.3 Vdc to 100 VdcOperating Temperature: –55 °C to 105 °CLife Test: 5000 h @ 105 °CRipple Current: Up to 2 amps @ 100 kHz, 105 °CESR: To 33 mΩ @ 100 kHz

New, Big-Seven case sizes. All computergrade, screw-terminal capacitor types are now available in 7 5/8 inch(200 mm) lengths. This new length is an especially goodvalue because it allows us to use anode and cathodefoils cut to half the roll width, and so there is no need forspecial widths and no wasted foil. It’s super for fast, on-time delivery.

New Type 325, 125 °C Long-Life, Switching-Power GradeRadial Capacitor is an ultra-wide-temperature, ultra-low-ESRelectrolytic capacitor. It’s a great choice for switching power-supply outputs and automotive applications. One of thesecapacitors can save by replacing eight to ten of the 12.5 mmdiameter capacitors routinely at the output of switching powersupplies.

Capacitance: 880 µF to 46000 µF –10 +75% (See page 2.116)Voltage: 6.3 Vdc to 35 VdcOperating Temperature: –55 °C to 125 °CLife Test: 2000 h @ 125 °CRipple Current: Up to 27 amps @ 20 kHz, 85 °CESR: To 5 mΩ @ 20 kHz

New Type ESRH 125 °C Ultra-Low ImpedanceAluminum Polymer Chip is great for DC/DC con-verter bricks and other hot, high-frequency appli-cations. Like the Type ESRE 105 °C chip, it filtersbetter than 3 or 4 polymer tantalum chips. It deliv-

ers the stability of film chips, is ignition free and fits the footprint ofD-case tantalum chips.

Capacitance: 68 µF to 270 µF ± 20% (See page 1.045)Voltage: 2 Vdc to 8 VdcOperating Temperature: –55 °C to 125 °CLife Test: 1000 h @ 125 °C & 75% voltageRipple Current: 2 or 3 amps @ 100 kHz, 125 °CESR: To 15 mΩ @ 100 kHz

New Type 381LQ Snap-In Capacitor is onaverage 23% smaller and more than 5 mmshorter than Type 381L. A new can-closuremethod installs the capacitor elements intosmaller cans. With nearly the robust capability of

the 381L, the new 381LQ enables you to shrink equipment size andretain the original performance.

Capacitance: 100 to 3300 µF ±20% (See page 2.070)Voltage: 160 to 450 VdcOperating Temperature: –40 °C to 125 °CLife Test: 5000 h at full load at 85 °CRipple Current: To 4.9 amps @ 20 kHz, 105 °CESR: To 41 mΩ @ 20 kHz

New Type 450C is a significantly better value than com-parable 105 °C snap-in capacitors. It’s a plug-in, invertergrade capacitor that can deliver the ripple-current capabilityand exceptional life needed for motor-drive and inverter buscapacitors. The extended cathode foil of the 450C assurescool operation and heat flow from the capacitor element tothe can in all orientations

Capacitance: 150 µF to 24,000 µF ± 20% (See page 2.143)Voltage: 100 to 500 VdcOperating Temperature: –40 °C to 105 °CLife Test: 2,000 h at Full load @ 105°CRipple Current: To 28.4 amps @ 20 kHz, 85 °CESR: To 6.9 mΩ @ 20 kHz

Bound Printed MatterC

APA

CIT

OR

S

CORNELLDUBILIER


Products Listed by Type Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Chip and SMT CapacitorsSelector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.001Aluminum Electrolytic SMT Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.002Aluminum/Polymer Low Impedance Chip Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.028Mica High-Frequency, High-Voltage Chip Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.047PPS Film Chip Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.052

Aluminum Electrolytic CapacitorsSelector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.001Screw-Terminal, Computergrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.005Mounting Hardware for Screw-Terminal Computergrade Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.053Snap-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.054Radial Leaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.095Axial Leaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.153Photoflash and Strobe-Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.176Application Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.183

Film CapacitorsSelector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.000Polyester Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.002Polypropylene Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.024Taping Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.051Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.053Application Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.054

Mica CapacitorsSelector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.001Standard Dipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.002Miniature Dipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.006High-Frequency Dipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.011Reel-Packed Dipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.015Radial-Leaded Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.016Radial-Leaded Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.018High-Reliability Dipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.020High-Voltage, Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.025High-Voltage, Cylindrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.027High-Voltage and Pulse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.035

Pulse, High-Frequency and Snubber CapacitorsSelector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.001IGBT Snubber Capacitor Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.002Polypropylene Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.007Mica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.025Oil-Filled Snubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.029Application Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.030

Motor-Run, Motor-Start and High-Voltage DC Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.001

Capacitor Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.000

Metric Conversion Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.001

Sales Offices and Representatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.001

Contents

1605 East Rodney French Blvd. 140 Technology PlaceNew Bedford, MA 02744 Liberty, SC 29657

(508) 996-8564, Fax (508) 996-3830 (864) 843-2277, Fax (864) 843-3800http://www.cornell-dubilier.com http://www.cornell-dubilier.com

E-mail: [email protected] E-mail: [email protected]

Chip & SMTCapacitors

Chip and SMT

Capacitors

1605 East Rodney French Blvd.New Bedford, MA 02744(508) 996-8564, Fax (508) 996-3830http://www.cornell-dubilier.comE-mail: [email protected] 1.001

Chip and SMT

Capacitors

CORNELLDUBILIER


Selector Guide, Chip and SMT Capacitors

Voltage Capacitance Temperature Load PageForm Type Description Range Range Range Life NumberFactor (Vdc) (µF) (°C) (h @ °C)

Aluminum Electrolytic, Cylindrical

AVS General Purpose 4–100 0.1–1500 –40 to 85 2000 @ 85 1.002

AHA Long–Life 6.3–100 0.1–1500 –55 to 105 1000 or 1.0072000 @ 105

AFC Long–Life, Low 6.3–50 1–1500 –55 to 105 1000 1.012Impedance @ 105

AHD Very Long Life 10–100 0.47–330 –40 to 105 5000 1.016

AFK Compact, Low ESR, 6.3–100 3.3–6800 –55 to 105 2000 or 1.020Low Z, Long Life 5000 @ 105

Aluminum Polymer, Chip

ESRD Tantalum D case 2–16 2.2–220 –55 to 105 1000 @ 105 1.028compatible

ESRL Tantalum D case 2–8 22–68 –55 to 105 1000 @ 105 1.032compatible

ESRE Tantalum E case 2–8 100–330 –55 to 105 1000 @ 105 1.031compatible

ESRH Tantalum E case 2–8 68–270 –55 to 125 1000 @ 125 1.045compatible

Mica Chip Capacitors

MC silver mica, 0805, 100–1000 1 pF–0.0022 –55 to 125 2000 @ 125 1.0471210, 1812, 2220

Film Chip Capacitors

Met. PPS, 0805,FCP 1206, 1210, 1913, 16–50 0.0001–0.22 –55 to 125 1000 @ 125 1.052

2416

FCN Met. PEN, 1206 to 16–250 0.001–1.0 –40 to 85 or 1000 @ 85 1.0566040 –55 to 105

FCA Acrylic resin, 0805, 16 0.1–1.0 –40 to 85 1000 @ 85 1.0641206, 1210

Low ProfileTantalum D case

compatible

High TemperatureTantalum E case

compatible

1605 East Rodney French Blvd.New Bedford, MA 02744

(508) 996-8564, Fax (508) 996-3830http://www.cornell-dubilier.com

E-mail: [email protected]

CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

General Purpose Filtering, Bypassing, Power Supply Decoupling

♦ +85°C, 2000 Hour Load Life♦ Capacitance Range: 0.1 µF to 1500 F♦ Voltage Range: 4.0 Vdc to 100 Vdc

Specifications

Highlights

Type AVSSMT Aluminum Electrolytic Capacitors - General Purpose, 85°C

Type AVS Capacitors are the best value for filter andbypass applications not requiring wide temperatureperformance or high ripple current. Their vertical cylindricalcases facilitate automatic mounting and reflow solderingand Type AVS offers a significant cost savings overtantalum capacitors.

50/60 Hz 120 Hz 1 kHz 10 kHz & up0.7 1.0 1.3 1.7

Operating Temperature: Rated Voltage: Capacitance: D.F (@ 20°C): Capacitance Tolerance: Leakage Current:Ripple Current Multipliers:

-40°C to +85°C4.0, 6.3, 10, 16, 25, 35, 50, 63 & 100 Vdc0.1 µF to 1500 µ FSee Ratings Table±20% @ 120 Hz and +20°C0.01 CV or 3 µ A @ +20°C, after two minutes (whichever is greater)

CaseCode D ± 0.5 L A ± 0.2 H (max) I (ref) W P (ref) K

A 3.0 5.4 +.1,-.2 3.3 4.5 1.5 0.55 ± 0.1 0.6 0.35 + 0.15/-0.20B 4.0 5.4 +.1,-.2 4.3 5.5 1.8 0.65 ± 0.1 1.0 0.35 + 0.15/-0.20C 5.0 5.4 +.1,-.2 5.3 6.5 2.2 0.65 ± 0.1 1.5 0.35 + 0.15/-0.20D 6.3 5.4 +.1,-.2 6.6 7.8 2.6 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20X 6.3 7.9 ±.3 6.6 7.8 2.6 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20E 8.0 6.2 ±.3 8.3 9.5 3.4 0.65 ± 0.1 2.2 0.35 + 0.15/-0.20F 8.0 10.2 ±.3 8.3 10.0 3.4 0.90 ± 0.2 3.1 0.70 ± 0.20G 10.0 10.2 ±.3 10.3 12.0 3.5 0.90 ± 0.2 4.6 0.70 ± 0.20

Outline Drawing

W.V. (Vdc) 4 6.3 10 16 25 35 50 63 100-25°C / +20°C 7 4 3 2 2 2 2 3 3-40°C / +20°C 15 8 6 4 4 3 3 4 4

Maximum Impedance Ratio @ 120 Hz

Frequency

Case Dimensions

Load Life: Shelf Life:2000 h @ +85°C ∆ Capacitance: ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit

1000 h @ +85°C ∆ Capacitance: ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit

(mm)

AVS Series Marking

220

6 = 6.3 Vdc16 = 16 Vdc25 = 25 Vdc, etc.

Capacitance (µ F)

s or A

Voltage

Series

Lot No.

H

LW

PD

0.3 mm Max. A

I

I

K


Chip and SMT

Capacitors

CORNELLDUBILIER


Max. Max. Max.Max. Dissipation ESR @ Ripple Current Size

Cap Catalog DCL Factor @ 120 Hz/20°C 120 Hz/85°C Case D x L QuantityµF Number (µA) 120 Hz (Ohms) (mA) Code (mm) per Reel

22 AVS226M04A12T 3.0 0.37 27.9 19 A 3x5.4 200033 AVS336M04B12T 3.0 0.35 17.6 26 B 4x5.4 200047 AVS476M04B12T 3.0 0.35 12.3 34 B 4x5.4 2000

100 AVS107M04C12T 4.0 0.35 5.8 61 C 5x5.4 1000220 AVS227M04D16T 8.8 0.35 2.6 82 D 6.3x5.4 1000

22 AVS226M06A12T 3.0 0.35 26.4 20 A 3x5.4 200022 AVS226M06B12T 3.0 0.26 19.6 29 B 4x5.4 200033 AVS336M06B12T 3.0 0.35 17.6 29 B 4x5.4 200047 AVS476M06B12T 3.0 0.35 12.3 36 B 4x5.4 200047 AVS476M06C12T 3.0 0.26 9.2 46 C 5x5.4 1000

100 AVS107M06C12T 6.3 0.35 5.8 47 C 5x5.4 1000100 AVS107M06D16T 6.3 0.26 4.3 71 D 6.3x5.4 1000220 AVS227M06D16T 13.9 0.35 2.6 74 D 6.3x5.4 1000330 AVS337M06X16T 20.8 0.26 1.3 150 X 6.3x7.9 900330 AVS337M06E16T 20.8 0.35 1.8 300 E 8x6.2 1000470 AVS477M06F24T 29.6 0.35 1.2 380 F 8x10.2 5001000 AVS108M06F24T 63.0 0.35 0.6 500 F 8x10.2 5001000 AVS108M06G24T 63.0 0.35 0.6 700 G 10x10.2 5001500 AVS158M06G24T 94.5 0.35 0.4 700 G 10x10.2 500

22 AVS226M10B12T 3.0 0.3 22.6 28 B 4x5.4 200033 AVS336M10B12T 3.3 0.3 15.1 29 B 4x5.4 200033 AVS336M10C12T 3.3 0.2 10.1 43 C 5x5.4 100047 AVS476M10C12T 4.7 0.3 10.6 43 C 5x5.4 1000

100 AVS107M10C12T 10.0 0.3 5.0 50 C 5x5.4 1000100 AVS107M10D16T 10.0 0.2 3.3 70 D 6.3x5.4 1000220 AVS227M10X16T 22.0 0.2 1.5 150 X 6.3x7.9 900220 AVS227M10E16T 22.0 0.26 2.0 250 E 8x6.2 1000330 AVS337M10F24T 33.0 0.26 1.3 330 F 8x10.2 500470 AVS477M10F24T 47.0 0.26 0.92 330 F 8x10.2 500470 AVS477M10G24T 47.0 0.26 0.92 400 G 10x10.2 5001000 AVS108M10G24T 100.0 0.26 0.43 580 G 10x10.2 500

10 Vdc (13 Vdc Surge)

4 Vdc (5 Vdc Surge)

6.3 Vdc (8 Vdc Surge)

10 AVS106M16A12T 3.0 0.18 29.9 20 A 3x5.4 200010 AVS106M16B12T 3.0 0.16 26.5 28 B 4x5.4 200022 AVS226M16B12T 3.5 0.26 19.6 28 B 4x5.4 200022 AVS226M16C12T 3.5 0.16 12.1 39 C 5x5.4 100033 AVS336M16C12T 5.3 0.26 13.1 35 C 5x5.4 100047 AVS476M16C12T 7.5 0.26 9.2 39 C 5x5.4 100047 AVS476M16D16T 7.5 0.16 5.6 70 D 6.3x5.4 1000

100 AVS107M16D16T 16.0 0.26 4.3 70 D 6.3x5.4 1000100 AVS107M16E16T 16.0 0.2 3.3 200 E 8x6.2 1000220 AVS227M16X16T 35.2 0.16 1.2 150 X 6.3x7.9 900220 AVS227M16E16T 35.2 0.2 1.5 200 E 8x6.2 1000220 AVS227M16F24T 35.2 0.2 1.5 280 F 8x10.2 500330 AVS337M16F24T 52.8 0.2 1.0 320 F 8x10.2 500330 AVS337M16G24T 52.8 0.2 1.0 380 G 10x10.2 500470 AVS477M16F24T 75.2 0.2 0.71 320 F 8x10.2 500470 AVS477M16G24T 75.2 0.2 0.71 420 G 10x10.2 500

4.7 AVS475M25A12T 3.0 0.16 56.5 12 A 3x5.4 20004.7 AVS475M25B12T 3.0 0.14 49.4 22 B 4x5.4 200010 AVS106M25B12T 3.0 0.20 33.2 22 B 4x5.4 200010 AVS106M25C12T 3.0 0.14 23.2 28 C 5x5.4 100022 AVS226M25C12T 5.5 0.20 15.1 35 C 5x5.4 100022 AVS226M25D16T 5.5 0.14 10.6 55 D 6.3x5.4 100033 AVS336M25C12T 8.3 0.2 10.0 42 C 5x5.4 100033 AVS336M25D16T 8.3 0.14 7.0 65 D 6.3x5.4 100047 AVS476M25D16T 11.8 0.20 7.1 70 D 6.3x5.4 1000

100 AVS107M25X16T 25.0 0.14 2.3 150 X 6.3x7.9 900100 AVS107M25E16T 25.0 0.16 2.7 91 E 8x6.2 1000100 AVS107M25F24T 25.0 0.16 2.7 180 F 8x10.2 500220 AVS227M25F24T 55.0 0.16 1.2 140 F 8x10.2 500220 AVS227M25G24T 55.0 0.16 1.2 310 G 10x10.2 500330 AVS337M25F24T 82.5 0.16 0.8 150 F 8x10.2 500330 AVS337M25G24T 82.5 0.16 0.8 340 G 10x10.2 500470 AVS477M25G24T 117.5 0.16 0.6 360 G 10x10.2 500



Type AVS

Ratings Table

SMT Aluminum Electrolytic Capacitors - General Purpose, 85°C




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors



2.2 AVS225M35A12T 3.0 0.14 105.6 8 A 3x5.4 20003.3 AVS335M35A12T 3.0 0.14 70.4 10 A 3x5.4 20004.7 AVS475M35B12T 3.0 0.12 42.4 22 B 4x5.4 200010 AVS106M35B12T 3.5 0.16 26.5 22 B 4x5.4 200010 AVS106M35C12T 3.5 0.12 19.9 30 C 5x5.4 100022 AVS226M35C12T 7.7 0.16 12.1 36 C 5x5.4 100022 AVS226M35D16T 7.7 0.12 9.1 60 D 6.3x5.4 100033 AVS336M35D16T 11.6 0.16 8.0 60 D 6.3x5.4 100033 AVS336M35E16T 11.6 0.14 7.0 130 E 8x6.2 100047 AVS476M35D16T 16.5 0.16 5.6 70 D 6.3x5.4 100047 AVS476M35E16T 16.5 0.14 4.9 165 E 8x6.2 1000

100 AVS107M35X16T 35.0 0.12 2.0 130 X 6.3x7.9 900100 AVS107M35F24T 35.0 0.14 2.3 140 F 8x10.2 500100 AVS107M35G24T 35.0 0.14 2.3 210 G 10x10.2 500220 AVS227M35F24T 77.0 0.14 1.1 200 F 8x10.2 500220 AVS227M35G24T 77.0 0.14 1.1 310 G 10x10.2 500330 AVS337M35G24T 115.5 0.14 0.7 320 G 10x10.2 500

0.1 AVS104M50A12T 3.0 0.14 2322 1 A 3x5.4 20000.1 AVS104M50B12T 3.0 0.12 1990 1 B 4x5.4 2000

0.22 AVS224M50A12T 3.0 0.14 1055 2 A 3x5.4 20000.22 AVS224M50B12T 3.0 0.12 905 2 B 4x5.4 20000.33 AVS334M50A12T 3.0 0.14 704 3 A 3x5.4 20000.33 AVS334M50B12T 3.0 0.12 603 3 B 4x5.4 20000.47 AVS474M50A12T 3.0 0.14 494 5 A 3x5.4 20000.47 AVS474M50B12T 3.0 0.12 424 5 B 4x5.4 2000

1 AVS105M50A12T 3.0 0.14 232 8 A 3x5.4 20001 AVS105M50B12T 3.0 0.12 199 10 B 4x5.4 2000

2.2 AVS225M50A12T 3.0 0.14 106 10 A 3x5.4 20002.2 AVS225M50B12T 3.0 0.12 90.5 16 B 4x5.4 20003.3 AVS335M50B12T 3.0 0.12 60.3 16 B 4x5.4 20004.7 AVS475M50B12T 3.0 0.14 49.4 18 B 4x5.4 20004.7 AVS475M50C12T 3.0 0.12 42.4 23 C 5x5.4 100010 AVS106M50C12T 5.0 0.14 23.2 27 C 5x5.4 100010 AVS106M50D16T 5.0 0.12 19.9 35 D 6.3x5.4 100022 AVS226M50D16T 11.0 0.14 10.6 60 D 6.3x5.4 1000



22 AVS226M50E16T 11.0 0.12 9.1 120 E 8x6.2 100033 AVS336M50X16T 16.5 0.12 6.0 85 X 6.3x7.9 90033 AVS336M50E16T 16.5 0.12 6.0 130 E 8x6.2 100033 AVS336M50F24T 16.5 0.12 6.0 140 F 8x10.2 50047 AVS476M50X16T 23.5 0.12 4.2 90 X 6.3x7.9 90047 AVS476M50F24T 23.5 0.12 4.2 150 F 8x10.2 50047 AVS476M50G24T 23.5 0.12 4.2 160 G 10x10.2 500

100 AVS107M50F24T 50.0 0.12 2.0 200 F 8x10.2 500100 AVS107M50G24T 50.0 0.12 2.0 250 G 10x10.2 500220 AVS227M50G24T 110.0 0.12 0.9 300 G 10x10.2 500

10 AVS106M63D16T 6.3 0.18 29.9 35 D* 6.3x5.7 100022 AVS226M63E16T 13.9 0.18 13.6 40 E 8x6.2 100022 AVS226M63F24T 13.9 0.18 13.6 40 F 8x10.2 50033 AVS336M63F24T 20.8 0.18 9.1 45 F 8x10.2 50047 AVS476M63F24T 29.6 0.18 6.4 45 F 8x10.2 500

100 AVS107M63G24T 63.0 0.18 3.0 60 G 10x10.2 500

3.3 AVS335M2AE16T 3.3 0.18 90.4 50 E 8x6.2 10004.7 AVS475M2AE16T 4.7 0.18 63.5 50 E 8x6.2 10004.7 AVS475M2AF24T 4.7 0.18 63.5 80 F 8x10.2 50010 AVS106M2AE16T 10.0 0.18 29.8 50 E 8x6.2 100010 AVS106M2AF24T 10.0 0.18 29.8 85 F 8x10.2 50022 AVS226M2AF24T 22.0 0.18 13.6 70 F 8x10.2 50022 AVS226M2AG24T 22.0 0.18 13.6 90 G 10x10.2 50033 AVS336M2AG24T 33.0 0.18 8.0 90 G 10x10.2 500

63 Vdc (75 vdc Surge)


12 = Carrier Tape Width (mm)T = Tape & ReelB = Bulk

Type AVS

Part Numbering SystemAVS 106 M

Type Capacitance Capacitance Tolerance104 = 0.1 µ F

105 = 1.0 µ F106 = 10 µ F107 = 100 µ F108 = 1000 µ F

16 B 12T

Voltage CaseCode

PackagingInformation

M = ±20%04 = 4 Vdc06 = 6.3 Vdc10 = 10 Vdc16 = 16 Vdc25 = 25 Vdc

35 = 35 Vdc50 = 50 Vdc63 = 63 Vdc2A = 100 Vdc

Ratings Table


*Overall case height (L dimension) is 5.7 mm ±0.3 mm.


Chip and SMT

Capacitors

CORNELLDUBILIER


0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue –40°C

0°C

25°C

65°C

85°C

45°C

–20°C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

0

0.2

0.4

0.6

0.8

1

1.2

1.4

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

40°C

45°

–20°C

Impedance vs. Temperature and Frequency

1500 µF @ 6.3 Vdc (10 X 10.2 mm)Capacitance vs. Temperature & Frequency

ESR vs. Temperature and Frequency

0

0.2

0.4

0.6

0.8

1

1.2

1.4

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

–40°C

45°C

–20°C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

Capacitance vs. Temperature & Frequency



100 µF @ 16 Vdc (10 X 10.2 mm)

Frequency (Hz) Frequency (Hz)


Frequency (Hz)Frequency (Hz)

Type AVS

Typical Performance Curves


1500 µF @ 6.3 Vdc (10 X 10.2 mm)

1500 µF @ 6.3 Vdc (10 X 10.2 mm)

100 µF @ 16 Vdc (10 X 10.2 mm)

100 µF @ 16 Vdc (10 X 10.2 mm)

–




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type AVS

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C

85°C 45°C

–20°C

-20

-15

-10

-5

0

5

10

0 500 1 ,000 1 ,500 2 ,000

Cap

acita

nce

Cha

nge

(%)

1 0 µF @ 16 Vdc (4 x 5 .4 mm )

47 µF @ 16 Vdc ( 6 .3 x 5 .4 m m)

330 µF @ 16 Vdc (10 x 10.2 mm )


0

0 .2

0 .4

0 .6

0 .8

1

1 .2

1 0 1 0 0 1 ,0 0 0 1 0 ,0 0 0 1 0 0 ,0 0 0 1 ,0 0 0 ,0 0 0

Rat

io to

25°

C, 1

20 H

z V

alue

6 5 °C

2 5 °C

8 5 °C

0 °C

– 4 0 ° C

4 5 °C

– 2 0 ° C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C



Capacitance vs. Temperature & Frequency220 µF @ 50 Vdc (10 X 10.2 mm)

-30

-25

-20

-15

-10

-5

0

5

10

-60 -40 -20 0 20 40 60 80 100

Cap

acita

nce

Cha

nge

(%)

100 µF @ 6.3 Vdc (6.3 X 5.4 mm)

47µF @ 16Vdc (6.3 X 5.4 mm)

10µF @ 50Vdc (6.3 X 5.4 mm)

Capacitance Change with Temperature(Typical Performance for AVS Series @ 120 Hz)

Temperature (°C)

0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

1.8

2

-60 -40 -20 0 20 40 60 80 100

D.F

. (@

120

Hz)

100 µF @ 6.3 Vdc (6.3 X 5.4 mm)

47 µF @ 16 Vdc (6.3 X 5.4 mm)

10 µF @ 50 Vdc (6.3 X 5.4 mm )

Dissipation Factor vs. Temperature

Temperature (°C)

Capacitance Change vs. Time

Time (Hours)

Frequency (Hz)

Frequency (Hz)

Frequency (Hz)


220 µF @ 50 Vdc (10 X 10.2 mm)

220 µF @ 50 Vdc (10 X 10.2 mm)

(Typical Performance for AVS Series @ 120 Hz)

(Typical Performance AVS Series)


Chip and SMT

Capacitors

CORNELLDUBILIER


Type AHA, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Long Life, 105°CLong Life Filtering, Bypassing, Power Supply Decoupling

Highlights♦ +105°C, Up to 2000 Hour Load Life♦ Capacitance Range: 0.1 µF to 1500 µF♦ Voltage Range: 6.3 Vdc to 100 Vdc

Type AHA Capacitors deliver twice the life of many SMTaluminum capacitor types, and they handle high levels ofripple current. The AHA can handle the ripple current ofType AVS at 20°C higher temperature. The verticalcylindrical cases facilitate automatic mounting and reflowsoldering and Type AHA offers a significant cost savingsover tantalum capacitors.

Specifications Operating Temperature: Rated Voltage: Capacitance: D.F. (@ 20°C): Capacitance Tolerance: Leakage Current:Ripple Current Multipliers:

-55°C to +105°C6.3, 10, 16, 25, 35, 50, 63 & 100 Vdc0.1 µF to 1500 µFSee Ratings Table±20% @ 120Hz and +20°C0.01 CV or 3 µA @ +20°C after two minutes (whichever is greater)

50/60 Hz 120 Hz 1 kHz 10 kHz & up0.7 1 1.3 1.7

Frequency

1000 h @ +105°C, 4.0 - 6.3 mm dia.2000 h @ +105°C, 8.0 - 10.0 mm dia. ∆ Capacitance ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit

1000 h @ +105°C, 4.0 - 6.3 mm dia. ∆ Capacitance ± 20% DF: ≤ 200% of limit DCL: ≤100% of limit

Outline Drawing


B 4.0 5.4 +.1,-.2 4.3 5.5 1.8 0.65 ± 0.1 1.0 0.35 + 0.15/-0.20C 5.0 5.4 +.1,-.2 5.3 6.5 2.2 0.65 ± 0.1 1.5 0.35 + 0.15/-0.20D 6.3 5.4 +.1,-.2 6.6 7.8 2.4 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20X 6.3 7.9 ±.3 6.6 7.8 2.6 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20E 8.0 6.2 ±.3 8.3 9.5 3.4 0.65 ± 0.1 2.2 0.35 + 0.15/-0.20F 8.0 10.2 ±.3 8.3 10 3.4 0.90 ± 0.2 3.1 0.70 ± 0.20G 10.0 10.2 ±.3 10.3 12 3.5 0.90 ± 0.2 4.6 0.70 ± 0.20

W.V. (Vdc) 6.3 10 16 25 35 50 63 100-25 °C / +20 °C 4 3 2 2 2 2 3 3-40 °C / +20 °C 8 6 4 4 3 3 4 4

Maximum Impedance Ratio

Case Dimensions

Load Life: Shelf Life:

(mm)

AHA Series MarkingCapacitance (µF)

HA220

Voltage

Lot No.

Series

j = 6.3 Vdc V = 35 VdcA = 10 Vdc H = 50 VdcC = 16 Vdc J = 63 VdcE = 25 Vdc 2A = 100 Vdc

H

LW

PD

0.3 mm Max. A

I

I

K




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Cap Catalog DCL Factor @ 120 Hz/20°C 120 Hz/105°C Case D x L QuantityµF Number µA) 120 Hz (Ohms) (mA) Code (mm) per Reel

22 AHA226M06B12T 3.0 0.30 22.6 29 B 4x5.4 200033 AHA336M06B12T 3.0 0.35 17.6 29 B 4x5.4 200047 AHA476M06B12T 3.0 0.35 12.3 36 B 4x5.4 200047 AHA476M06C12T 3.0 0.30 10.6 46 C 5x5.4 1000

100 AHA107M06C12T 6.3 0.35 5.8 47 C 5x5.4 1000100 AHA107M06D16T 6.3 0.30 5.0 71 D 6.3x5.4 1000220 AHA227M06D16T 13.9 0.35 2.6 74 D 6.3x5.4 1000330 AHA337M06X16T 20.8 0.30 1.5 105 X 6.3x7.9 900330 AHA337M06F24T 20.8 0.35 1.8 230 F 8x10.2 500470 AHA477M06F24T 29.6 0.35 1.2 300 F 8x10.2 5001000 AHA108M06F24T 63.0 0.35 0.6 300 F 8x10.2 5001000 AHA108M06G24T 63.0 0.35 0.6 400 G 10x10.2 5001500 AHA158M06G24T 94.5 0.35 0.4 480 G 10x10.2 500

22 AHA226M10B12T 3.0 0.30 22.6 28 B 4x5.4 200033 AHA336M10B12T 3.3 0.30 15.1 29 B 4x5.4 200033 AHA336M10C12T 3.3 0.22 11.1 43 C 5x5.4 100047 AHA476M10C12T 4.7 0.30 10.6 43 C 5x5.4 1000

100 AHA107M10D16T 10.0 0.30 5.0 70 D 6.3x5.4 1000100 AHA107M10E16T 10.0 0.26 4.3 110 E 8x6.2 1000220 AHA227M10X16T 22.0 0.22 1.7 105 X 6.3x7.9 900220 AHA227M10F24T 22.0 0.26 2.0 160 F 8x10.2 500470 AHA477M10F24T 47.0 0.26 0.9 200 F 8x10.2 500470 AHA477M10G24T 47.0 0.26 0.9 270 G 10x10.2 5001000 AHA108M10G24T 100.0 0.26 0.4 580 G 10x10.2 500

10 AHA106M16B12T 3.0 0.16 26.5 28 B 4x5.4 200022 AHA226M16B12T 3.5 0.26 19.6 28 B 4x5.4 200022 AHA226M16C12T 3.5 0.16 12.1 39 C 5x5.4 100033 AHA336M16C12T 5.3 0.26 13.1 35 C 5x5.4 100047 AHA476M16C12T 7.5 0.26 9.2 39 C 5x5.4 100047 AHA476M16D16T 7.5 0.16 5.6 70 D 6.3x5.4 1000

100 AHA107M16D16T 16.0 0.26 4.3 70 D 6.3x5.4 1000220 AHA227M16X16T 35.2 0.16 1.2 105 X 6.3x7.9 900220 AHA227M16F24T 35.2 0.20 1.5 150 F 8x10.2 500220 AHA227M16G24T 35.2 0.20 1.5 210 G 10x10.2 500330 AHA337M16F24T 52.8 0.20 1.0 170 F 8x10.2 500330 AHA337M16G24T 52.8 0.20 1.0 230 G 10x10.2 500470 AHA477M16F24T 75.2 0.20 0.7 190 F 8x10.2 500470 AHA477M16G24T 75.2 0.20 0.7 340 G 10x10.2 500

4.7 AHA475M25B12T 3.0 0.14 49.4 22 B 4x5.4 200010 AHA106M25B12T 3.0 0.20 33.2 22 B 4x5.4 200010 AHA106M25C12T 3.0 0.14 23.2 28 C 5x5.4 100022 AHA226M25C12T 5.5 0.20 15.1 35 C 5x5.4 100022 AHA226M25D16T 5.5 0.14 10.6 55 D 6.3x5.4 100033 AHA336M25C12T 8.3 0.20 10.0 42 C 5x5.4 100033 AHA336M25D16T 8.3 0.14 7.0 65 D 6.3x5.4 100047 AHA476M25D16T 11.8 0.20 7.1 70 D 6.3x5.4 100047 AHA476M25E16T 11.8 0.16 5.6 91 E 8x6.2 1000

100 AHA107M25E16T 25.0 0.16 2.7 91 E 8x6.2 1000100 AHA107M25F24T 25.0 0.16 2.7 130 F 8x10.2 500220 AHA227M25F24T 55.0 0.16 1.2 160 F 8x10.2 500220 AHA227M25G24T 55.0 0.16 1.2 190 G 10x10.2 500330 AHA337M25F24T 82.5 0.16 0.8 180 F 8x10.2 500330 AHA337M25G24T 82.5 0.16 0.8 340 G 10x10.2 500470 AHA477M25G24T 117.5 0.16 0.6 360 G 10x10.2 500

6.3 Vdc ( 8 Vdc Surge)


16 Vdc ( 20 Vdc Surge)


Type AHA, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Long Life, 105°CRatings Table


Chip and SMT

Capacitors

CORNELLDUBILIER




4.7 AHA475M35B12T 3.0 0.12 42.3 22 B 4x5.4 200010 AHA106M35B12T 3.6 0.16 26.5 22 B 4x5.4 200010 AHA106M35C12T 3.6 0.12 19.9 30 C 5x5.4 100022 AHA226M35C12T 7.7 0.16 12.1 35 C 5x5.4 100022 AHA226M35D16T 7.7 0.12 9.0 60 D 6.3x5.4 100033 AHA336M35D16T 11.6 0.16 8.0 42 D 6.3x5.4 100033 AHA336M35E16T 11.6 0.14 7.0 84 E 8x6.2 100047 AHA476M35E16T 16.5 0.14 4.9 84 E 8x6.2 100047 AHA476M35F24T 16.5 0.14 4.9 98 F 8x10.2 500

100 AHA107M35X16T 35.0 0.12 2.0 84 X 6.3x7.9 900100 AHA107M35F24T 35.0 0.14 2.3 120 F 8x10.2 500100 AHA107M35G24T 35.0 0.14 2.3 160 G 10x10.2 500220 AHA227M35F24T 77.0 0.14 1.1 170 F 8x10.2 500220 AHA227M35G24T 77.0 0.14 1.1 210 G 10x10.2 500330 AHA337M35G24T 115.5 0.14 0.7 250 G 10x10.2 500

0.1 AHA104M50B12T 3.0 0.12 1990 1 B 4x5.4 20000.22 AHA224M50B12T 3.0 0.12 905 2 B 4x5.4 20000.33 AHA334M50B12T 3.0 0.12 603 3 B 4x5.4 20000.47 AHA474M50B12T 3.0 0.12 424 5 B 4x5.4 2000

1 AHA105M50B12T 3.0 0.12 199 10 B 4x5.4 20002.2 AHA225M50B12T 3.0 0.12 90.5 16 B 4x5.4 20003.3 AHA335M50B12T 3.0 0.12 60.3 16 B 4x5.4 20004.7 AHA475M50C12T 3.0 0.12 42.4 23 C 5x5.4 100010 AHA106M50D16T 5.0 0.12 19.9 35 D 6.3x5.4 100022 AHA226M50E16T 11.0 0.12 9.0 70 E 8x6.2 100033 AHA336M50X16T 16.5 0.12 6.0 60 X 6.3x7.9 90033 AHA336M50E16T 16.5 0.12 6.0 70 E 8x6.2 100033 AHA336M50F24T 16.5 0.12 6.0 91 F 8x10.2 50047 AHA476M50X16T 23.5 0.12 4.2 63 X 6.3x7.9 90047 AHA476M50F24T 23.5 0.12 4.2 95 F 8x10.2 50047 AHA476M50G24T 23.5 0.12 4.2 100 G 10x10.2 500

100 AHA107M50F24T 50.0 0.12 2.0 110 F 8x10.2 500100 AHA107M50G24T 50.0 0.12 2.0 120 G 10x10.2 500220 AHA227M50G24T 110.0 0.12 0.9 150 G 10x10.2 500

10 AHA106M63E16T 6.3 0.18 29.9 25 E 8x6.2 100022 AHA226M63E16T 13.9 0.18 13.6 30 E 8x6.2 100022 AHA226M63F24T 13.9 0.18 13.6 30 F 8x10.2 50033 AHA336M63G24T 20.8 0.18 9.0 45 G 10x10.2 50047 AHA476M63F24T 29.6 0.18 6.3 50 F 8x10.2 50047 AHA476M63G24T 29.6 0.18 6.3 50 G 10x10.2 500

3.3 AHA335M2AE16T 3.3 0.18 90.5 30 E 8x6.2 10004.7 AHA475M2AE16T 4.7 0.18 63.5 30 E 8x6.2 10004.7 AHA475M2AF24T 4.7 0.18 63.5 50 F 8x10.2 50010 AHA106M2AF24T 10.0 0.18 29.8 55 F 8x10.2 50022 AHA226M2AF24T 22.0 0.18 13.6 55 F 8x10.2 50022 AHA226M2AG24T 22.0 0.18 13.6 60 G 10x10.2 50033 AHA336M2AG24T 33.0 0.18 9.0 65 G 10x10.2 500





Type AHA, -55°C to 105°CSMT Aluminum Electrolytics Capacitors - Long Life, 105°C

Part Numbering SystemAHA 106 M 16 B 12T

Type Capacitance Capacitance Tolerance

Voltage CaseCode

PackagingInformation104 = 0.1 µ

µF

105 = 1.0 µ

F106 = 10 F107 = 100 µ F108 = 1000 µF

M = ±20% 12 = Carrier Tape Width (mm)T = Tape & ReelB = Bulk

06 = 6.3 Vdc10 = 10 Vdc16 = 16 Vdc25 = 25 Vdc

35 = 35 Vdc50 = 50 Vdc63 = 63 Vdc2A = 100 Vdc

Ratings Table




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type AHA, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Long Life, 105°CTypical Performance Curves

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue –40°C

0°C

25°C

65°C

85°C

45°C

–20°C

105°C

–55°C

0.1

1

10

100

1000

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C45°C

85°C

65°C

105°C

–55°C

0

0.2

0.4

0.6

0.8

1

1.2

1.4

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue 65°C

25°C

85°C

0°C

105°C

–40°C

45°

–20°C

–55°C

Capacitance vs. Temperature & Frequency1500 µF @ 6.3 Vdc (10 X 10.2 mm)



Frequency (Hz)

Frequency (Hz)


Frequency (Hz)

Frequency (Hz)

0

0.2

0.4

0.6

0.8

1

1.2

1.4

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

105°C

–40°C

45°

–20°C

–55°C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C45°C

85°C

65°C

105°C

–55°C

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

–55°C




470 µF @ 16 Vdc (10 X 10.2 mm)

1500 µF @ 6.3 Vdc (10 X 10.2 mm)

1500 µF @ 6.3 Vdc (10 X 10.2 mm)

470 µF @ 16 Vdc (10 X 10.2 mm)

470 µF @ 16 Vdc (10 X 10.2 mm)


Chip and SMT

Capacitors

CORNELLDUBILIER


Type AHA, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Long Life, 105°CTypical Performance Curves


0

0.2

0.4

0.6

0.8

1

1.2

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

105°C

–40°C

45°C

–20°C

–55°C

0.1

1

10

100

1000

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

105°C

–55°C

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

–55°C

Impedance vs. Temperature and Frequency220µF @ 50 Vdc (10 X 10.2 mm)


Frequency (Hz)

Frequency (Hz)

Frequency (Hz)

-30

-25

-20

-15

-10

-5

0

5

10

-60 -40 -20 0 20 40 60 80 100 120

Cap

acita

nce

Cha

nge

(%)

100 µF @ 6.3 Vdc (6.3 X 5.4 mm)47 µF @ 16 Vdc (6.3 X 5.4 mm)

10 µF @ 50 Vdc (6.3 X 5.4 mm)

Capacitance Change with Temperature(Typical Performance AHA @ 120 Hz)

Temperature (°C)

Temperature (°C)

0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

1.8

2

-60 -40 -20 0 20 40 60 80 100 120

D.F

. (@

120

Hz)

100 µF @ 6.3 Vdc (6.3 X 5.4 mm)47 µF @ 16 Vdc (6.3 X 5.4 mm)10 µF @ 50 Vdc (6.3 X 5.4 mm)

Dissipation Factor vs. Temperature(Typical Performance AHA @ 120 Hz)

-30

-25

-20

-15

-10

-5

0

5

10

0 250 500 750 1,000 1,250 1,500 1,750 2,000

Cap

acita

nce

Cha

nge

(%)

10 µF @ 16 Vdc (4 x 5.4 mm)47 µF @ 16 Vdc ( 6.3 x 5.4 mm)330 µF @ 16 Vdc (10 x 10.2 mm)

Capacitance Change vs Time

Time (Hours)

220µF @ 50 Vdc (10 X 10.2 mm)

220µF @ 50 Vdc (10 X 10.2 mm)

(Typical Performance for AHA Series)




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Low Impedance and Long-Life for Filtering, Bypassing, Power Supply Decoupling

Highlights♦ +105°C, Up to 1000 Hour Load Life♦ Capacitance Range: 1 µ F to 1500 µ F♦ Voltage Range: 6.3 Vdc to 50 Vdc

Type AFC Capacitors are the choice for high-frequencyfiltering. At 100 kHz, most ratings can handle morethan twice the ripple current of type AHA. With solidperformance at temperatures down to -55°C, Type AFChas more than 90% capacitance retention at -20°C and 1kHz. With low impedance to beyond 100 kHz, it is idealfor higher power DC/DC converters. The verticalcylindrical cases make for easy automatic mounting andreflow soldering, and offer big savings and highercapacitance compared to tantalum capacitors.

Type AFC, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Low Impedance, 105°C

-55°C to +105°C6.3, 10, 16, 25 & 50 Vdc1.0 µF to 1500 µF±20% @ 120 Hz and +20°C0.01 CV or 3 µ A @ +20°C, after two minutes (whichever is greater)Frequency

See Ratings Table

Specifications

1000 h @ +105°C ∆ Capacitance ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit

1000 h @ +105°C ∆ Capacitance ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit

Load Life: Shelf Life:

Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current:Ripple Current Multiplier:

Dissipation Factor:

50/60 Hz 120 Hz 1 kHz 10 kHz 100 kHz0.7 0.75 0.9 0.95 1.0

Case DimensionsCaseCode D ± 0.5 L A ± 0.2 H (max) I (ref) W P (ref) K

B 4.0 5.4 +.1,-.2 4.3 5.5 1.8 0.65 ± 0.1 1.0 0.35 + 0.15/-0.20C 5.0 5.4 +.1,-.2 5.3 6.5 2.2 0.65 ± 0.1 1.5 0.35 + 0.15/-0.20D 6.3 5.4 +.1,-.2 6.6 7.8 2.4 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20E 8.0 6.2 ±.3 8.3 9.5 3.4 0.65 ± 0.1 2.2 0.35 + 0.15/-0.20F 8.0 10.2 ±.3 8.3 10 3.4 0.90 ± 0.2 3.2 0.70 ± 0.20G 10.0 10.2 ±.3 10.3 12 3.5 0.90 ± 0.2 4.6 0.70 ± 0.20

Outline Drawing

H

LW

PD

0.3 mm Max. A

I

I

K

AFC Series Marking

220

Capacitance (µF)

Voltage

Series

FC

Line Ident.

j = 6.3 Vdc E = 25 VdcA = 10 Vdc V = 35 VdcC = 16 Vdc H = 50 Vdc


Chip and SMT

Capacitors

CORNELLDUBILIER


1 AFC105M35B12T 3.0 0.12 199 3.0 60 B 4x5.4 20002.2 AFC225M35B12T 3.0 0.12 90.4 3.0 60 B 4x5.4 20003.3 AFC335M35B12T 3.0 0.12 60.3 3.0 60 B 4x5.4 20004.7 AFC475M35B12T 3.0 0.12 42.4 3.0 60 B 4x5.4 20006.8 AFC685M35C12T 3.0 0.12 29.3 1.8 95 C 5x5.4 100010 AFC106M35C12T 3.5 0.12 19.9 1.8 95 C 5x5.4 100022 AFC226M35D16T 7.7 0.12 9.1 1.0 140 D 6.3x5.4 100033 AFC336M35E16T 11.6 0.12 6.0 0.4 230 E 8x6.2 100047 AFC476M35E16T 16.5 0.12 4.2 0.4 230 E 8x6.2 1000

100 AFC107M35G24T 35.0 0.12 2.0 0.2 670 G 10x10.2 500220 AFC227M35G24T 77.0 0.12 0.9 0.15 670 G 10x10.2 500330 AFC337M35G24T 115.5 0.12 0.6 0.15 670 G 10x10.2 500

1 AFC105M50B12T 3.0 0.12 199 5.0 30 B 4x5.4 20002.2 AFC225M50B12T 3.0 0.12 90.5 5.0 30 B 4x5.4 20003.3 AFC335M50B12T 3.0 0.12 60.3 5.0 30 B 4x5.4 20004.7 AFC475M50C12T 3.0 0.12 42.4 3.0 50 C 5x5.4 100010 AFC106M50D16T 5.0 0.12 19.9 2.0 70 D 6.3x5.4 100022 AFC226M50E16T 11.0 0.12 9.1 0.7 120 E 8x6.2 100033 AFC336M50F24T 16.5 0.12 6.0 0.6 300 F 8x10.2 50047 AFC476M50G24T 23.5 0.12 4.2 0.3 500 G 10x10.2 500

100 AFC107M50G24T 50.0 0.12 2.0 0.3 500 G 10x10.2 500220 AFC227M50G24T 110.0 0.12 0.9 0.3 500 G 10x10.2 500


50 Vdc ( 63 vdc Surge)

Part Numbering System


Ratings TableMax. Max. Max.

Max. Dissipation ESR @ Impedance Ripple CurrentCap Catalog DCL Factor @ 120 Hz @ 100 kHz @ 105°C Case Size (mm) QuantityµF Number (µA/2 120 Hz 20 °C 20 °C 100 kHz Code D x L per Reel

min) 20 °C (Ω) (Ω) (mA)

22 AFC226M06B12T 3.0 0.26 19.6 3.0 60 B 4x5.4 200047 AFC476M06C12T 3.0 0.26 9.2 1.8 95 C 5x5.4 1000

100 AFC107M06D16T 6.3 0.26 4.3 1.0 140 D 6.3x5.4 1000220 AFC227M06E16T 13.9 0.26 2.0 0.4 230 E 8x6.2 1000330 AFC337M06F24T 20.8 0.26 1.3 0.3 450 F 8x10.2 5001000 AFC108M06G24T 63.0 0.26 0.43 0.15 670 G 10x10.2 5001500 AFC158M06G24T 94.5 0.26 0.29 0.15 670 G 10x10.2 500

33 AFC336M10C12T 3.3 0.19 9.6 1.8 95 C 5x5.4 1000100 AFC107M10E16T 10.0 0.19 3.2 0.4 230 E 8x6.2 1000150 AFC157M10E16T 15.0 0.19 2.1 0.4 230 E 8x6.2 1000220 AFC227M10F24T 22.0 0.19 1.4 0.3 450 F 8x10.2 500470 AFC477M10G24T 47.0 0.19 0.67 0.15 670 G 10x10.2 5001000 AFC108M10G24T 100.0 0.22 0.36 0.15 670 G 10x10.2 500

10 AFC106M16B12T 3.0 0.16 26.5 3.0 60 B 4x5.4 200022 AFC226M16C12T 3.5 0.16 12.1 1.8 95 C 5x5.4 100047 AFC476M16D16T 7.5 0.16 5.7 1.0 140 D 6.3x5.4 100068 AFC686M16E16T 10.9 0.16 3.9 0.4 230 E 8x6.2 1000

100 AFC107M16E16T 16.0 0.16 2.7 0.4 230 E 8x6.2 1000220 AFC227M16G24T 35.2 0.16 1.2 0.15 670 G 10x10.2 500330 AFC337M16G24T 52.8 0.16 0.8 0.15 670 G 10x10.2 500470 AFC477M16G24T 75.2 0.16 0.6 0.15 670 G 10x10.2 500680 AFC687M16G24T 108.8 0.16 0.4 0.15 670 G 10x10.2 500

6.8 AFC685M25B12T 3.0 0.14 34.1 3.0 60 B 4x5.4 200022 AFC226M25D16T 5.5 0.14 10.6 1.0 140 D 6.3x5.4 100033 AFC336M25D16T 8.3 0.14 7.0 1.0 140 D 6.3x5.4 100047 AFC476M25E16T 11.8 0.14 4.9 0.4 230 E 8x6.2 100068 AFC686M25F24T 17.0 0.14 3.4 0.3 450 F 8x10.2 500

100 AFC107M25F24T 25.0 0.14 2.3 0.3 450 F 8x10.2 500220 AFC227M25G24T 55.0 0.14 1.1 0.15 670 G 10x10.2 500330 AFC337M25G24T 82.5 0.14 0.7 0.15 670 G 10x10.2 500470 AFC477M25G24T 117.5 0.14 0.5 0.15 670 G 10x10.2 500





10 = 10 Vdc 35 = 35 Vdc16 = 16 Vdc 50 = 50 Vdc25 = 25 Vdc

AFC 106 M 16 B 12T

Type Capacitance Capacitance Tolerance

Voltage CaseCode

PackagingInformation105 = 1.0 µF

106 = 10 µF107 = 100 µF108 = 1000 µF

M = ±20%12 = Carrier Tape Width (mm)T = Tape & ReelB = Bulk



0

0 .2

0 .4

0 .6

0 .8

1

1 .2

1 .4

1 0 1 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0

Rat

io to

25°

C, 1

20 H

z V

alue

6 5 ° C

2 5 ° C

8 5 ° C

0 ° C

– 4 0 ° C

4 5 ° C

– 2 0 ° C

1 0 5 ° C

– 5 5 ° C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C45°C

85°C65°C

–55°C

105°C


1500 µF @ 6.3 Vdc (10 X 10.2 mm)mm)

1500 µF @ 6.3 Vdc (10 X 10.2 mm)

1500 µF @ 6.3 Vdc (10 X 10.2 mm)



Frequency (Hz)

Frequency (Hz)

Frequency (Hz)

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

–55°




0

0 . 2

0 . 4

0 . 6

0 . 8

1

1 . 2

1 0 1 0 0 1 , 0 0 0 1 0 ,0 0 0 1 0 0 ,0 0 0 1 , 0 0 0 ,0 0 0

Rat

io to

25°

C, 1

20 H

z V

alue

6 5 ° C

2 5 ° C

8 5 ° C

0 ° C

– 4 0 ° C

4 5 ° C

– 2 0 ° C

1 0 5 ° C

– 5 5 ° C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

–55°C

105°C

Frequency (Hz)

Frequency (Hz)

Frequency (Hz)

330 µF @ 6.3 Vdc (8 X 10.2 mm)

330 µF @ 6.3 Vdc (8 X 10.2 mm)

330 µF @ 6.3 Vdc (8 X 10.2 mm)mm)

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

–55°C




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


SMT Aluminum Electrolytic Capacitors - Low Impedance, 105°CType AFC




0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

–55°

0 .1

1

10

100

10 100 1 ,000 10,000 100 ,000 1 ,000 ,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40 °C

–20 °C

0 °C

25 °C

45 °C

85 °C65 °C

–55 °C

105 °C

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue 65°C

25°C

85°C

0°C

–40°C

45°C

–20°C

105°C

–55°C

220 µF @ 50 Vdc (10 X 10.2 mm)

220 µF @ 50 Vdc (10 X 10.2 mm)

220 µF @ 50 Vdc (10 X 10.2 mm)

Frequency (Hz)

Frequency (Hz)

Frequency (Hz)

-20

-10

0

10

20

-60 -40 -20 0 20 40 60 80 100 120

Cap

acita

nce

Cha

nge

(%)

100 µF @ 6.3 Vdc (6.3 X 5.4 mm)

47 µF @ 16 Vdc (6.3 X 5.4 mm)

10 µF @ 50 Vdc (6.3 X 5.4 mm)

Capacitance Change with Temperature(Typical Performance AFC Series @ 120 Hz)

(Typical Performance AFC Series @ 120 Hz)

Temperature (°C)

Temperature (°C)

Dissipation Factor vs. Temperature

0

0.1

0.2

0.3

0.4

0.5

0.6

-60 -40 -20 0 20 40 60 80 100 120

D.F

. (@

120

Hz)

100 µF @ 6.3 Vdc (6.3 X 5.4 mm)

47 µF @ 16 Vdc (6.3 X 5.4 mm)

10 µF @ 50 Vdc (6.3 X 5.4 mm)

-2 0

-1 5

-1 0

-5

0

5

1 0

0 5 0 0 1 ,0 0 0 1 ,5 0 0 2 ,0 0 0

Cap

acita

nce

Cha

nge

(%)

1 0 µF @ 1 6 Vdc (4 x 5 .4 mm)

4 7 µF @ 1 6 Vdc ( 6 .3 x 5 .4 mm)

3 3 0 µF @ 1 6 Vdc (1 0 x 1 0 .2 mm)

Capacitance Change vs Time

Time (Hours)

(Typical Performance AFC Series)


Chip and SMT

Capacitors

CORNELLDUBILIER





CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type AHDSMT Aluminum Electrolytic Capacitors - Long Life, 105°CLong Life Filtering, Bypassing, Power Supply Decoupling

Highlights♦ +105°C, 5000 Hour Load Life♦ Capacitance Range: 0.47µF to 330µF♦ Voltage Range: 10 Vdc to 100 Vdc

SpecificationsOperating Temperature: Rated Voltage: Capacitance:Capacitance Tolerance: Leakage Current:Ripple Current Multiplier:

Dissipation Factor:

-40°C to+105°C10,16, 25, 35, 50, 63 &100 Vdc0.47 F to 330 F±20% @ 120 Hz and +20°C0.01 CV or 3 µA @ +20°C, after two minutes (whichever is greater)Frequency

Load Life: Shelf Life:5000 h @ +105°C ∆ Capacitance: ±30% DF: ≤ 300% of limit DCL: ≤ 100% of limit

1000 h @ +105°C ∆ Capacitance: ±20% DF: ≤ 200% of limit DCL: ≤ 100% of limit

Low Temperature Vdc 10 16 25 35 50 - 100Stability -22°C / +20°C 6 2 2 2 2

Impedance Ratio @ 120 Hz -40°C / +20°C 12 5 3 3 3

Outline Drawing

Case Dimensions

Voltage 10V 16V 25V 35V 50V 63 V 100 V4 to 6.3 mm - 0.2 0.16 0.13 0.12 - -8 to 10 mm 0.3 0.23 0.18 0.16 0.14 0.18 0.18

AHD Series Marking

H

LW

PD

0.3 mm Max. A

I

I

K

In smaller capacitance values usually rated for 1000 to 2000hours load life, the Type AHD delivers 5000 hour load lifecapability. While not a low-impedance type, the Type AHD isthe choice for long life in small capacitance, general filteringapplications. The vertical cylindrical cases facilitate automaticmounting and reflow soldering and Type AHD offers significantcost savings over tantalum capacitors.


B 4.0 5.8 +.1,-.2 4.3 5.5 1.8 0.65 ± 0.1 1.0 0.35 + 0.15/-0.20C 5.0 5.8+.1,-.2 5.3 6.5 2.2 0.65 ± 0.1 1.5 0.35 + 0.15/-0.20D 6.3 5.8 +.1,-.2 6.6 7.8 2.4 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20E 8.0 6.2 ±.3 8.3 9.5 3.4 0.65 ± 0.1 2.2 0.35 + 0.15/-0.20F 8.0 10.2 ±.3 8.3 10 3.4 0.90 ± 0.2 3.2 0.70 ± 0.20G 10.0 10.2 ±.3 10.3 13 3.5 0.90 ± 0.2 4.6 0.70 ± 0.20

220

Capacitance (µF)

Voltage

Series

HD

Lot No.

A = 10 Vdc V = 35 VdcC = 16 Vdc H = 50 VdcE = 25 Vdc J = 63 Vdc 2A = 100 Vdc

50/60 Hz 120 Hz 1 kHz 10 kHz 100 kHz0.7 1.0 1.3 1.7 1.7


Chip and SMT

Capacitors

CORNELLDUBILIER


Ratings Table

12 = Carrier Tape Width (mm)T = Tape & ReelB = Bulk


Max. Max. Max.Max. Dissipation ESR @ Impedance Ripple Current

Cap Catalog DCL Factor @ 120 Hz @ 100 kHz @ 105°C Case Size (mm) QuantityF Number (µ A/2 120 Hz 20 °C 20 °C 120 Hz Code D x L per Reel

min) 20 °C (Ω) (Ω ) (mA)

100 AHD107M10E16T 10.0 0.3 5.0 2.0 62 E 8x6.2 1000220 AHD227M10F24T 22.0 0.3 2.3 1.5 93 F 8x10.2 500330 AHD337M10G24T 33.0 0.3 1.5 0.8 118 G 10x10.2 500

10 AHD106M16B12T 3.0 0.2 33.2 12.0 20 B 4x5.8 200022 AHD226M16C12T 3.5 0.2 15.1 7.2 33 C 5x5.8 100047 AHD476M16D16T 7.5 0.2 7.1 4.0 55 D 6.3x5.8 1000

100 AHD107M16F24T 16.0 0.23 3.8 1.5 89 F 8x10.2 500220 AHD227M16G24T 35.2 0.23 1.7 0.8 113 G 10x10.2 500

4.7 AHD475M25B12T 3.0 0.16 56.4 12.0 15 B 4x5.8 200010 AHD106M25C12T 3.0 0.16 26.5 7.2 26 C 5x5.8 100022 AHD226M25D16T 5.5 0.16 12.1 4.0 42 D 6.3x5.8 100033 AHD336M25D16T 8.3 0.16 8 2.0 52 D 6.3x5.8 100047 AHD476M25E16T 11.8 0.18 6.3 1.5 56 E 8x6.2 1000

100 AHD107M25F24T 25.0 0.18 3 0.8 84 F 8x10.2 500

4.7 AHD475M35B12T 3.0 0.13 45.9 12.0 17 B 4x5.8 200010 AHD106M35C12T 3.5 0.13 21.6 7.2 28 C 5x5.8 100022 AHD226M35D16T 7.7 0.13 9.8 4.0 47 D 6.3x5.8 100033 AHD336M35E16T 11.6 0.16 8 2.0 53 E 8x6.2 100047 AHD476M35F24T 16.5 0.16 5.6 1.5 79 F 8x10.2 500

100 AHD107M35G24T 35.0 0.16 2.7 0.8 101 G 10x10.2 500

0.47 AHD474M50B12T 3.0 0.12 424 12.0 5 B 4x5.8 20001 AHD105M50B12T 3.0 0.12 199 12.0 7 B 4x5.8 2000

2.2 AHD225M50B12T 3.0 0.12 90.4 12.0 12 B 4x5.8 20003.3 AHD335M50B12T 3.0 0.12 60.3 12.0 16 B 4x5.8 20004.7 AHD475M50C12T 3.0 0.12 42.3 7.2 21 C 5x5.8 100010 AHD106M50D16T 5.0 0.12 19.9 4.0 33 D 6.3x5.8 100022 AHD226M50E16T 11.0 0.14 10.6 2.0 50 E 8x6.2 100033 AHD336M50F24T 16.5 0.14 7 1.5 74 F 8x10.2 50047 AHD476M50G24T 23.5 0.14 4.9 0.8 94 G 10x10.2 500

10 AHD106M63E16T 6.3 0.18 29.8 2.0 45 E 8x6.2 100022 AHD226M63F24T 13.86 0.18 13.6 1.5 65 F 8x10.2 50033 AHD336M63G24T 20.79 0.18 9 0.8 80 G 10x10.2 500

3.3 AHD335M2AE16T 3.3 0.18 90.4 2.0 30 E 8x6.2 10004.7 AHD475M2AF24T 4.7 0.18 63.5 1.5 50 F 8x10.2 50010 AHD106M2AF24T 10.0 0.18 29.8 1.5 55 F 8x10.2 50022 AHD226M2AG24T 22.0 0.18 13.6 0.8 70 G 10x10.2 500








AHD

Type

106

Capacitance

104 = 0.1 F105 = 1.0 µF106 = 10 µF107 = 100 µF

M

Capacitance Tolerance

M = ±20%

16

Voltage

10 = 10 Vdc 50 = 50 Vdc16 = 16 Vdc 63 = 63 Vdc25 = 25 Vdc 2A = 100 Vdc35 = 35 Vdc

B

CaseCode

12T

PackagingInformation

Type AHDSMT Aluminum Electrolytic Capacitors - Long Life, 105°C

µ




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type AHDSMT Aluminum Electrolytic Capacitors - Long Life, 105°CTypical Performance Curves

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

–40°C

45°C

–20°C

105°

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

–40°C

45°C

–20°C

105°

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

Capacitance vs. Temperature & Frequency330 µF @ 10 Vdc (10 X 10.2 mm)

330 µF @ 10 Vdc (10 X 10.2 mm)Impedance vs. Temperature & Frequency

Frequency (Hz)

Frequency (Hz)

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C65°C

105°

330 µF @ 10 Vdc (10 X 10.2 mm)ESR vs. Temperature & Frequency

Frequency (Hz)

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

105°C

0.001

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue –40°C

0°C

25°C

65°C

85°C

45°C

–20°C

105°


ESR vs. Temperature & Frequency

Impedance vs. Temperature & Frequency

10 µF @ 16 Vdc (4 X 5.8 mm)

10 µF @ 16 Vdc (4 X 5.8 mm)

10 µF @ 16 Vdc (4 X 5.8 mm)

Frequency (Hz)

Frequency (Hz)

Frequency (Hz)


Chip and SMT

Capacitors

CORNELLDUBILIER


Type AHDSMT Aluminum Electrolytic Capacitors - Long Life, 105°CTypical Performance Curves


Frequency (Hz)

0.001

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C

85°C

45°C

–20°C

105°C

0.001

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue –40°C

0°C

25°C

65°C85°C

45°C

–20°C

510 °C

100 µF @ 35 Vdc (10 X 10.2 mm)

Capacitance Change vs. Temperature

Dissipation Factor vs. Temperature(Typical Performance AHD Series @ 120 Hz)

Temperature (°C)

0.01

0.1

1

10D

issi

patio

n Fa

ctor

at 1

20 H

z100 µF, 10 V

47 µF, 16 V

10 µF, 50 V

-60 -40 -20 0 20 40 60 80 100 120

-40

-35

-30

-25

-20

-15

-10

-5

0

5

10

-60 -40 -20 0 20 40 60 80 100 120

Cap

acita

nce

Cha

nge

(%)

47 µF, 16 V

100 µF, 10 V

10 µF, 50 V

100 µF, 10 V

47 µF, 16 V

10 µF, 50 V

Temperature (°C)

(Typical Performance AHD Series @ 120 Hz)


ESR vs. Temperature & Frequency


Frequency (Hz)

Frequency (Hz)

Frequency (Hz)

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

–40°C

45°C

–20°C

105°

0.01

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

105°C

10 µF @ 50 Vdc (6.3 X 5.8 mm)

10 µF @ 50 Vdc (6.3 X 5.8 mm)

10 µF @ 50 Vdc (6.3 X 5.8 mm)




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type AFK, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105°CLowest ESR and Long Life for Filtering, Bypassing, Power Supply Decoupling

Highlights♦ +105°C, Up to 5000 Hour Load Life♦ Capacitance Range: 3.3 µF to 6800 µF♦ Voltage Range: 6.3 Vdc to 100 Vdc

SpecificationsOperating Temperature: Rated Voltage: Capacitance:Capacitance Tolerance: Leakage Current:Ripple Current Multiplier: Dissipation Factor:

-55°C to +105°C6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc3.3 µF to 6800 µ F±20% @ 120 Hz and +20°C0.01 CV or 3 µA @ +20°C, after two minutes (whichever is greater)Frequency

Life Test: Shelf Life:2000 h @ +105°C, 4.0 - 10.0 mm dia.5000 h @ +105°C, 12.5 - 18.0 mm dia. ∆ Capacitance ±30% DF: ≤ 200% of limit DCL: ≤ 100% of limit

1000 h @ +105°C ∆ Capacitance ±30% DF: ≤ 200% of limit DCL: ≤ 100% of limit

Outline Drawing

Case Dimensions

Series

6.3 V 10 V 16 V 25 V 35 V 50 V 63 V 80 V 100 V0.26 0.19 0.16 0.14 0.12 0.1 0.08 0.08 0.07

Add 0.02 per 1000 µF for values greater than 1000 µF

AFK Series Marking

Type AFK Capacitors are the best and by a wide margin.With 40% to 60% lower impedance, 30% to 50% smallercase size and more than twice the life compared tolow-ESR type AFC, the Type AFK also excels at coldperformance down to -55°C. In addition, this terrific,low-impedance performance approaching low-ESRtantalum capacitors is at a significant cost savingscompared to tantalum. The vertical cylindrical casesfacilitate automatic mounting and reflow soldering into thesame footprint of like-rated tantalum capacitors exceptwithout the need for voltage derating.

(mm)

FK220

Capacitance (µF)

Voltage

Lot No.

j 6.3VdcA 10VdcC 16VdcE 25VdcV 35VdcH 50VdcJ 63VdcK 80Vdc2A 100Vdc

H

LW

PD

0.3 mm Max. A

I

I

K

50/60 Hz 120 Hz 1 kHz 10 kHz 100 kHz0.7 0.75 0.9 0.95 1.0

Case Code D ± .05 L A ± 0.2 H (max) I (ref) W P (ref) KB 4.0 5.8 ± 0.3 4.3 5.5 1.8 0.65 ±0.1 1.0 0.35 +0.15/-0.20C 5.0 5.8 ± 0.3 5.3 6.5 2.2 0.65 ±0.1 1.5 0.35 +0.15/-0.20D 6.3 5.8 ± 0.3 6.6 7.8 2.4 0.65 ±0.1 1.8 0.35 +0.15/-0.20X 6.3 7.9 ± 0.3 6.6 7.8 2.4 0.65 ±0.1 1.8 0.35 +0.15/-0.20E 8.0 6.2 ± 0.3 8.3 9.5 3.4 0.65 ±0.1 2.2 0.35 +0.15/-0.20F 8.0 10.2 ± 0.3 8.3 10.0 3.4 0.90 ±0.3 3.1 0.70 ±0.20G 10.0 10.2 ± 0.3 10.3 13.0 3.5 0.90 ±0.3 4.6 0.70 ±0.20H 12.5 13.5 ± 0.5 13.5 15 4.7 0.90 ±0.3 4.4 0.70 ±0.30P 16 16.5 ± 0.5 17 19 5.5 1.2 ±0.3 6.7 0.70 ±0.30R 18 16.5 ± 0.5 19 21 6.7 1.2 ±0.3 6.7 0.70 ±0.30


Chip and SMT

Capacitors

CORNELLDUBILIER


Type AFK, -55°C to 105°CSMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105°C

Ratings TableMax. Max. Max.

Max. Dissipation ESR @ Impedance Ripple CurrentCap Catalog DCL Factor @ 100 kHz @ 100 kHz @ 105°C Case Size (mm) Quantity

µF Number A/2 120 Hz 20 °C 20 °C 100 kHz Code D x L per Reelmin) 20 °C (Ω ) ( ) (mA)

22 AFK226M06B12T 3.0 0.26 1.35 1.35 90 B 4x5.8 200047 AFK476M06B12T 3.0 0.26 1.35 1.35 90 B 4x5.8 200047 AFK476M06C12T 3.0 0.26 0.7 0.7 160 C 5x5.8 1000

100 AFK107M06C12T 6.3 0.26 0.7 0.7 160 C 5x5.8 1000100 AFK107M06D16T 6.3 0.26 0.36 0.36 240 D 6.3x5.8 1000220 AFK227M06D16T 13.9 0.26 0.36 0.36 240 D 6.3x5.8 1000330 AFK337M06X16T 20.8 0.26 0.34 0.34 280 X 6.3x7.7 900330 AFK337M06E16T 20.8 0.26 0.26 0.26 300 E 8x6.2 1000470 AFK477M06F24T 29.6 0.26 0.16 0.16 600 F 8x10.2 5001000 AFK108M06F24T 63.0 0.26 0.16 0.16 600 F 8x10.2 5001500 AFK158M06G24T 94.5 0.26 0.08 0.08 850 G 10x10.2 5003300 AFK338M06H32T 207.9 0.3 0.06 0.06 1100 H 12.5x13.5 2006800 AFK688M06P44T 428.4 0.36 0.035 0.035 1800 P 16x16.5 125

22 AFK226M10B12T 3.0 0.19 1.35 1.35 90 B 4x5.8 200033 AFK336M10B12T 3.3 0.19 1.35 1.35 90 B 4x5.8 200033 AFK336M10C12T 3.3 0.19 0.7 0.7 160 C 5x5.8 1000

150 AFK157M10D16T 15.0 0.19 0.36 0.36 240 D 6.3x5.8 1000220 AFK227M10X16T 22.0 0.19 0.34 0.34 280 X 6.3x7.7 900220 AFK227M10E16T 22.0 0.19 0.26 0.26 300 E 8x6.2 1000330 AFK337M10F24T 33.0 0.19 0.16 0.16 600 F 8x10.2 500470 AFK477M10F24T 47.0 0.19 0.16 0.16 600 F 8x10.2 5001000 AFK108M10G24T 100.0 0.19 0.08 0.08 850 G 10x10.2 5002200 AFK228M10H32T 220.0 0.21 0.06 0.06 1100 H 12.5x13.5 2004700 AFK478M10P44T 470.0 0.25 0.035 0.035 1800 P 16x16.5 1256800 AFK688M10R44T 680.0 0.29 0.033 0.033 2060 R 18x16.5 125

10 AFK106M16B12T 3.0 0.16 1.35 1.35 90 B 4x5.8 200022 AFK226M16B12T 3.5 0.16 1.35 1.35 90 B 4x5.8 200022 AFK226M16C12T 3.5 0.16 0.7 0.7 160 C 5x5.8 100047 AFK476M16C12T 7.5 0.16 0.7 0.7 160 C 5x5.8 100047 AFK476M16D16T 7.5 0.16 0.36 0.36 240 D 6.3x5.8 100068 AFK686M16D16T 10.9 0.19 0.36 0.36 240 D 6.3x5.8 1000

100 AFK107M16D16T 16.0 0.16 0.36 0.36 240 D 6.3x5.8 1000150 AFK157M16X16T 24.0 0.16 0.34 0.34 280 X 6.3x7.7 900220 AFK227M16X16T 35.2 0.16 0.34 0.34 280 X 6.3x7.7 900220 AFK227M16E16T 35.2 0.16 0.26 0.26 300 E 8x6.2 1000330 AFK337M16F24T 52.8 0.16 0.16 0.16 600 F 8x10.2 500470 AFK477M16F24T 75.2 0.16 0.08 0.08 850 F 8x10.2 500680 AFK687M16G24T 108.8 0.16 0.08 0.08 850 G 10x10.2 5001500 AFK158M16H32T 240 0.16 0.06 0.06 1100 H 12.5x13.5 2003300 AFK338M16P44T 528 0.2 0.035 0.035 1800 P 16x16.5 1254700 AFK478M16R44T 752 0.22 0.033 0.033 2060 R 18x16.5 125

10 AFK106M25B12T 3.0 0.14 1.35 1.35 90 B 4x5.8 200022 AFK226M25C12T 5.5 0.14 0.7 0.7 160 C 5x5.8 100033 AFK336M25C12T 8.3 0.14 0.7 0.7 160 C 5x5.8 100033 AFK336M25D16T 8.3 0.14 0.36 0.36 240 D 6.3x5.8 100047 AFK476M25D16T 11.8 0.14 0.36 0.36 240 D 6.3x5.8 100068 AFK686M25D16T 17.0 0.14 0.36 0.36 240 D 6.3x5.8 1000

100 AFK107M25X16T 25.0 0.14 0.34 0.34 280 X 6.3x7.7 900100 AFK107M25E16T 25.0 0.14 0.26 0.26 300 E 8x6.2 1000150 AFK157M25F24T 37.5 0.14 0.16 0.16 600 F 8x10.2 500220 AFK227M25F24T 55.0 0.14 0.16 0.16 600 F 8x10.2 500330 AFK337M25F24T 82.5 0.14 0.16 0.16 600 F 8x10.2 500470 AFK477M25G24T 117.5 0.14 0.16 0.16 850 G 10x10.2 5001000 AFK108M25H32T 250 0.14 0.06 0.06 1100 H 12.5x13.5 2002200 AFK228M25P44T 550 0.16 0.035 0.035 1800 P 16x16.5 1253300 AFK338M25R44T 825 0.18 0.033 0.033 2060 R 18x16.5 125



16 Vdc ( 20Vdc Surge)


Ω




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Type AFK, -55°C to 105°C

AFK

Type

106

Capacitance

M


Voltage Code

16 B

CaseCode

12T

Packaging Code105 = 1.0 µ F106 = 10 µ F107 = 100 µF108 = 1000 µF

M = ±20% 12 = Carrier Tape Width (mm) T = Tape & Reel B = Bulk

06 = 6.3 Vdc10 = 10 Vdc16 = 16 Vdc25 = 25 Vdc

35 = 35 Vdc50 = 50 Vdc63 = 63 Vdc80 = 80 Vdc

2A = 100 Vdc

SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105°C

Ratings TableM ax . M ax . M ax .

M ax . D is s ipat ion E S R @ Im pedanc e Ripple CurrentCap Cata log DCL F ac tor @ 100 k Hz @ 100 k Hz @ 105°C Cas e S iz e (m m ) Q uantityµF Num ber (µA /2 120 Hz 20 °C 20 °C 100 k Hz Code D x L per Reel

m in) 20 ° Ω Ω m A )

4.7 A FK 475M 35B 12T 3.0 0.12 1.35 1.35 90 B 4x 5.8 200010 A FK 106M 35B 12T 3.5 0.12 1.35 1.35 90 B 4x 5.8 200010 A FK 106M 35C12T 3.5 0.12 0.7 0.7 160 C 5x 5.8 100022 A FK 226M 35C12T 7.7 0.12 0.7 0.7 160 C 5x 5.8 100033 A FK 336M 35D16T 11.6 0.12 0.36 0.36 240 D 6.3x 5.8 100047 A FK 476M 35D16T 16.5 0.12 0.36 0.36 240 D 6.3x 5.8 100068 A FK 686M 35X16T 23.8 0.12 0.34 0.34 280 X 6.3x 7.7 900

100 A FK 107M 35X16T 35.0 0.12 0.34 0.34 280 X 6.3x 7.7 900100 A FK 107M 35F 24T 35.0 0.12 0.16 0.16 600 F 8x 10.2 500150 A FK 157M 35F 24T 52.5 0.12 0.16 0.16 600 F 8x 10.2 500220 A FK 227M 35F 24T 77.0 0.12 0.16 0.16 600 F 8x 10.2 500330 A FK 337M 35G 24T 115.5 0.12 0.08 0.08 850 G 10x 10.2 500470 A FK 477M 35H32T 164.5 0.12 0.06 0.06 1100 H 12.5x 13.5 200680 A FK 687M 35H32T 238 0.12 0.06 0.06 1100 H 12.5x 13.5 200

1500 A FK 158M 35P 44T 525 0.12 0.035 0.035 1800 P 16x 16.5 125

4.7 A FK 475M 50B 12T 2.4 0.10 2.9 2.9 60 B 4x 5.8 200010 A FK 106M 50C12T 5.0 0.10 1.52 1.52 85 C 5x 5.8 100010 A FK 106M 50D16T 5.0 0.10 0.88 0.88 165 D 6.3x 5.8 100022 A FK 226M 50D16T 11.0 0.10 0.88 0.88 165 D 6.3x 5.8 100033 A FK 336M 50X16T 16.5 0.10 0.68 0.68 195 X 6.3x 7.7 90033 A FK 336M 50E 16T 16.5 0.10 0.68 0.68 195 E 8x 6.2 100047 A FK 476M 50X16T 23.5 0.10 0.68 0.68 195 X 6.3x 7.7 90047 A FK 476M 50E 16T 23.5 0.10 0.68 0.68 195 E 8x 6.2 1000

100 A FK 107M 50F 24T 50.0 0.10 0.34 0.34 350 F 8x 10.2 500150 A FK 157M 50G 24T 75.0 0.10 0.18 0.18 670 G 10x 10.2 500220 A FK 227M 50G 24T 110 0.10 0.18 0.18 670 G 10x 10.2 500330 A FK 337M 50H32T 165 0.10 0.12 0.12 900 H 12.5x 13.5 200680 A FK 687M 50P 44T 340 0.10 0.073 0.073 1610 P 16x 16.5 125

1000 A FK 108M 50P 44T 500 0.10 0.073 0.073 1610 P 16x 16.5 125

4.7 A FK 475M 63C12T 2.96 0.08 3 3 50 C 5x 5.8 100010 A FK 106M 63D16T 6.3 0.08 1.5 1.5 80 D 6.3x 5.8 100022 A FK 226M 63X16T 13.9 0.08 1.2 1.2 120 X 6.3x 7.7 90022 A FK 226M 63E 16T 13.9 0.08 1.2 1.2 120 E 8x 6.2 100033 A FK 336M 63F 24T 20.8 0.08 0.65 0.65 250 F 8x 10.2 50047 A FK 476M 63F 24T 29.6 0.08 0.65 0.65 250 F 8x 10.2 50068 A FK 686M 63G 24T 42.8 0.08 0.35 0.35 400 G 10x 10.2 500

100 A FK 107M 63G 24T 63.0 0.08 0.35 0.35 400 G 10x 10.2 500150 A FK 157M 63H32T 94.5 0.08 0.35 0.35 800 H 12.5x 13.5 200220 A FK 227M 63H32T 138.6 0.08 0.16 0.16 800 H 12.5x 13.5 200470 A FK 477M 63P 44T 296.1 0.08 0.082 0.082 1410 P 16x 16.5 125680 A FK 687M 63R44T 428.4 0.08 0.08 0.08 1690 R 18x 16.5 125

3.3 A FK 335M 80C12T 2.64 0.08 5 5 25 C 5x 5.8 10004.7 A FK 475M 80D16T 3.76 0.08 3 3 40 D 6.3x 5.8 100010 A FK 106M 80X16T 8.0 0.08 2.4 2.4 60 X 6.3x 7.7 90010 A FK 106M 80E 16T 8.0 0.08 2.4 2.4 60 E 8x 6.2 100022 A FK 226M 80F 24T 17.6 0.08 1.3 1.3 130 F 8x 10.2 50033 A FK 336M 80F 24T 26.4 0.08 1.3 1.3 130 F 8x 10.2 50047 A FK 476M 80G 24T 37.6 0.08 0.7 0.7 200 G 10x 10.2 50068 A FK 686M 80H32T 54.4 0.08 0.32 0.32 500 H 12.5x 13.5 200

100 A FK 107M 80H32T 80.0 0.08 0.32 0.32 500 H 12.5x 13.5 200150 A FK 157M 80H32T 120 0.08 0.32 0.32 500 H 12.5x 13.5 200330 A FK 337M 80P 44T 264 0.08 0.17 0.17 793 P 16x 16.5 125470 A FK 477M 80R44T 376 0.08 0.153 0.153 917 R 18x 16.5 125

22 A FK 226M 2A F24T 22.0 0.07 1.3 1.3 130 F 8x 10.2 50033 A FK 336M 2A G 24T 33.0 0.07 0.7 0.7 200 G 10x 10.2 50047 A FK 476M 2A H32T 47.0 0.07 0.32 0.32 500 H 12.5x 13.5 20068 A FK 686M 2A H32T 68.0 0.07 0.32 0.32 500 H 12.5x 13.5 200

100 A FK 107M 2A P 44T 100 0.07 0.17 0.17 793 P 16x 16.5 125150 A FK 157M 2A P 44T 150 0.07 0.17 0.17 793 P 16x 16.5 125220 A FK 227M 2A R44T 220 0.07 0.153 0.153 917 R 18x 16.5 125330 A FK 337M 2A R44T 330 0.07 0.153 0.153 917 R 18x 16.5 125

100 V dc (125 V d c S u rg e )

35 V dc (44 V dc S urge )



80 V dc (100 V dc S urg e )


Chip and SMT

Capacitors

CORNELLDUBILIER





0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

–40°C

45°

–20°

105°

–55°C

.

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C 85°C45°C

–20°C

105°C

–55°C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C45°C

85°C 65°C105°

–55°C

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C

25°C

85°C

0°C

105°C

–40°C

45°

–20°C

–55°C

0.001

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C25°C

65°C 85°C

45°C

–20°C

105°C

–55°C

0.1

1

10

100

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

–20°C

0°C

25°C

45°C

85°C

65°C

105°C

–55°C

Impedance vs. Temperature and Frequency Impedance vs. Temperature and Frequency

ESR vs. Temperature and Frequency ESR vs. Temperature and Frequency

100 µF @ 16 Vdc (6.3 X 5.8 mm)Capacitance vs. Temperature & Frequency Capacitance vs. Temperature & Frequency

100 µF @ 16 Vdc (6.3 X 5.8 mm)

100 µF @ 16 Vdc (6.3 X 5.8 mm)

3300 µF @ 6.3 Vdc (12.5 X 13.5 mm)

3300 µF @6.3 Vdc (12.5 X 13.5 mm)

3300 µF @6.3 Vdc (12.5 X 13.5 mm)







CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors




0

1

2

3

-6 0 -1 0 4 0 9 0 1 4 0

D.F

. (@

120

Hz)

4 7 µ F @ 6 .3 V dc (4 X 5 .8 m m )1 0 0 µ F @ 6 .3 V dc (6 .3 X 5 .8 m m )1 0 0 0 µF @ 6 .3 V d c (8 X 1 0 .2 m m )

-2 0

-1 5

-1 0

-5

0

5

0 5 0 0 1 0 0 0 1 5 0 0 2 0 0 0 2 5 0 0 3 0 0 0 3 5 0 0

Cap

acita

nce

Cha

nge

(%)

2 2 µ F @ 6 .3 V d c (4 x 5 .4 m m )

1 0 0 µ F @ 6 .3 V d c ( 6 .3 x 5 .4 m m )

1 5 0 0 µ F @ 6 .3 V d c (1 0 x 1 0 .2 m m )

0

0.2

0.4

0.6

0.8

1

1.2

1.4

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

65°C25°C

85°C

0°C

–40°C

45°C

–20°C

105°C

–55°C

0.1

1

10

100

10 100 1,000 10 ,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

ñ40°C

ñ20°C

0°C

25 °C45 °C

85 °C65 °C 105°

ñ55°C

0.01

0.1

1

10

10 100 1,000 10,000 100,000 1,000,000

Rat

io to

25°

C, 1

20 H

z V

alue

–40°C

0°C

25°C

65°C85°C

45°C

–20°C

105°C

–55°C




470 µF @ 80 Vdc (18 X 16.5 mm)

470 µF @ 80 Vdc (18 X 16.5 mm)

470 µF @ 80 Vdc (18 X 16.5 mm)

-2 0

-1 5

-1 0

-5

0

5

1 0

1 5

-6 0 -1 0 4 0 9 0 1 4 0

Cap

acita

nce

Cha

nge

(%)

4 7 µ F @ 6 . 3 V d c (4 X 5 .8 m m )1 0 0 µ F @ 6 .3 V d c (6 .3 X 5 .8 m m )1 0 0 0 µ F @ 6 .3 V d c (8 X 1 0 .2 m m )3 3 µ F @ 8 0 V d c (8 X 1 0 .2 m m )

Capacitance Change vs.Temperature

Temperature (°C)

Dissipation Factor vs.Temperature

Frequency (Hz)

Frequency (Hz)

Frequency (Hz)

Temperature (°C)

Capacitance Change vs. Time

Time (Hours)

(Typical Performance AFK Series @ 120 Hz)

(Typical Performance AFK Series @ 120 Hz)

(Typical Performance for AFK Series)


Chip and SMT

Capacitors

CORNELLDUBILIER


Type AVS, AHA, AFC, AFK, AHD Tape and Reel SpecificationsTape Specifications

A ± 0.2 P1

B ± 0.2W ± 0.3

4 ± 0.11.5 dia 1.75 ± 0.1

F ± 0.1

0.4

t ± 0.2

Component OrientationPolarity Stripe (-) Cathode

Case Code W A B P1 F tA 12.0 3.4 3.5 8.0 5.5 5.8B 12.0 4.7 4.6 8.0 5.5 5.8C 12.0 6.0 6.0 12.0 5.5 5.8D 16.0 7.0 7.0 12.0 7.5 5.8X 16.0 7.0 7.0 12.0 7.5 8.4E 16.0 8.7 8.7 12.0 7.5 6.8F 24.0 8.7 8.7 16.0 11.5 11.0G 24.0 10.7 10.7 16.0 11.5 11.0

Case Code W A B C D F P SJ 32.0 10.7 10.7 14.5 14.5 14.2 20.0 28.4K 32.0 10.7 10.7 14.5 18.5 14.2 20.0 28.4H 32.0 14.0 14.0 18.0 14.5 14.2 24.0 28.4L 32.0 14.0 14.0 18.0 17.5 14.2 24.0 28.4P 44.0 17.5 17.5 23.0 17.5 20.2 28.0 40.4R 44.0 19.5 19.5 26.0 17.5 20.2 32.0 40.4S 44.0 19.5 19.5 26.0 22.5 20.2 32.0 40.4U 44 17.5 17.5 23 22.5 20.2 28 40.4

0.2+0.05

0.75+0.1

2.0±0.1 4.0±0.1 1.5±0.1

P±0.1 B±0.5

W±0.3S±0.1

F±0.1

1.75±0.1

A±0.5

D±0.20.5

C±0.5




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Land Pattern:

Reel Specifications

W

Case Code A B C D E W tA, B size 380±2 50 min 13.0±0.5 21.0±0.8 2.0±0.5 14±1 3.0

C, D, E, X size 380±2 50 min 13.0±0.5 21.0±0.8 2.0±0.5 18±1 3.0F, G size 380±2 50 min 13.0±0.5 21.0±0.8 2.0±0.5 26±1 3.0

J, K, H, L size 330±2 50 min 13.0±0.5 21.0±0.8 2.0±0.5 34±1 3.0P, R, S, U size 330±2 50 min 13.0±0.5 21.0±0.8 2.0±0.5 46±1 3.0

Type AVS, AHA, AFC, AFK, AHD Tape and Reel Specifications

EC

DR: 1.0 mm

(.039 in.)

A

t

B

Case Code A B CA 0.6 2.2 1.5B 1.0 2.5 1.6C 1.5 2.8 1.6D 2.2 3.0 1.6E 2.2 4.5 1.6F 3.2 4.0 2.0G 4.6 4.3 2.0

J, K 4 4.5 2.0H 4.0 5.7 2.0L 4.0 5.7 2.0P 6.0 6.5 2.5

R, U 6.0 6.5 2.5S 6.0 7.5 2.5

C

B BA


Chip and SMT

Capacitors

CORNELLDUBILIER


Type AVS, AHA, AFC, AFK, AHD Reflow Solder & Case Dimensions

Outline Drawing

Case Dimensions

Reflow Soldering Temperature Profile:

(mm)

*5.8 +0.1,-0.2 for AFK and AHD Series

Case Peak Max. TimeCode Temp (°C) @ 200°C

(Sec.)A, B, C, D, X 240 40

E, F, G, H 230 30J, K, L, PR, S, U


A 3.0 5.4 +.1,-.2 3.3 4.5 1.5 0.55 ± 0.1 0.6 0.35 + 0.15/-0.20B 4.0 5.4 +.1,-.2 4.3 5.5 1.8 0.65 ± 0.1 1.0 0.35 + 0.15/-0.20C 5.0 5.4 +.1,-.2 5.3 6.5 2.2 0.65 ± 0.1 1.5 0.35 + 0.15/-0.20D 6.3 5.4 +.1,-.2 6.6 7.8 2.4 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20X 6.3 7.9 ±.3 6.6 7.8 2.6 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20E 8.0 6.2 ±.3 8.3 9.5 3.4 0.65 ± 0.1 2.2 0.35 + 0.15/-0.20F 8.0 10.2 ±.3 8.3 10 3.4 0.90 ± 0.2 3.2 0.70 ± 0.20G 10.0 10.2 ±.3 10.3 13 3.5 0.90 ± 0.2 4.6 0.70 ± 0.20H 12.5 13.5 ± .5 13.5 15 4.7 0.9 ±0.3 4.4 0.70 ± 0.30J 10 13.5 10.3 12 3.5 0.9 ±0.2 4.6 0.70 ± 0.20K 10 17.5 10.3 12 3.5 0.9 ±0.2 4.6 0.70 ± 0.20L 12.5 16.5 ± .5 13.5 15.0 4.7 0.9±0.3 4.4 0.70 ± 0.30P 16.0 16.5 ± .5 17.0 19.0 5.5 1.2±0.3 6.7 0.70 ± 0.30R 18.0 16.5 ± .5 19.0 21.0 6.5 1.2±0.3 6.7 0.70 ± 0.30S 18.0 21.5 ± .5 19.0 21.0 6.5 1.2±0.3 6.7 0.70 ± 0.30U 16.0 21.5 17.0 19.0 6.7 1.2±0.3 6.7 0.70 ± 0.30

120 seconds

Preheat

Maximum Time @ 200°C(see chart below)

Time

160°C

200°C

PeakTemp.(see chartbelow)

5 secondsmaximum

H

LW

PD

0.3 mm Max. A

I

I

K




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

SPA CapacitorsSolid Polymer Aluminum Surface Mount Capacitors

Solid polymer aluminum capacitors combine the highcapacitance capability of an electrolytic componentwith the high frequency performance of film capacitors.When the need for low impedance at high frequency iscritical for your design, one SPA chip is capable ofreplacing several liquid electrolyte aluminum ortantalum capacitors connected in parallel. This is dueto the ultra-low e.s.r. which results in significantly lowerimpedance than either aluminum or tantalumcapacitors at frequencies of 100 kHz and above. Thereis no longer a need to stack capacitors to lower theimpedance at high frequency. The low e.s.r. and high

capacitance make them ideal for bypassing highfrequency noise, and for switching frequency filteringin DC/ DC conversion. SPA capacitors are packaged ina molded resin case with the same footprint (7.3x4.3mm) as the industry standard tantalum “D” and “E”case sizes. The solid electrolyte results in a capacitorwith stable impedance and equivalent series resistanceover the entire operating temperature range and theyhave more than twice the ripple current handlingcapability of tantalum capacitors. In addition, thesolid electrolyte delivers a typical expected operatinglife of more than 50 years, and it is ignition free.

Highlights• Capacitance Range: 2.2 µF to 330 µF• Ripple current ratings up to 3.0Arms at 100 kHz and 105°C• Low Impedance• Ultra-Low E.S.R.; 10 m Ω @ 100 kHz• -55° to 105°C operating temperature

• Voltage Range: 2.0 Vdc to 16 Vdc• Solid electrolyte for extended life• Footprint Compatible with “D” and “E” Case Tantalum• Flat Z and E.S.R. vs. temperature• Ignition free

Filtering power of 3 or more tantalum chips and 50 year life

CDE SPA Type ESRE ESRD ESRD ESRL

Dimensions (mm) 7.3x4.3x4.2 7.3x4.3x3.1 7.3x4.3x1.8 7.3x4.3x1.1

Capacitance Range (µF) 100 - 330 68 - 220 2.2 - 100 22 - 68

Max. ESR at 100 kHz (Ω) 0.015 0.018 .025 - .110 .040 - .090

Max. Ripple Current at 100 kHz (Arms) 3.0 2.2 1.0 - 1.8 1.6


Chip and SMT

Capacitors

CORNELLDUBILIER


SPA CapacitorsSolid Polymer Aluminum Capacitors

Markings

Ordering Information

Polarity Stripe (Anode)

+Capacitance(ìRî = Decimal Point) W.V. Code

D = 2.0 VE = 2.5 VG = 4.0 VJ = 6.3 V

CDEType

CAPACITANCECODE

4R7 = 4.7 µF220 = 22 µF101 = 100 µF CAPACITANCE

TOLERANCEM = ± 20%

WVDC CODE02 = 2.0 Vdc0E = 2.5 Vdc04 = 4.0 Vdc06 = 6.3 Vdc

PACKAGING CODE R = Tape & Reel

ESRD (1.8mm Ht.): 3500 pcs/ reel ESRD (3.1mm Ht.): 2000 pcs/ reel

ESRE: 2000 pcs/reelESRL: 3500 pcs/reel

B = Bulk Quantity (100 pc multiples)

ESRD 4R7 M 16 R

K = 8.0 VB = 12.5 VC = 16.0 V

08 = 8.0 Vdc12 = 12.5 Vdc16 = 16.0 Vdc

Applications

Motherboard By-PassSwitching Supply Input/Output Filters

Power Supply DecouplingHigh Frequency Noise Reduction

Laptop LCD DisplaysAutomotive Digital Equipment

Portable Electronic Equipment

Lot Code




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Ratings

1 For other frequencies use the ripple current frequency multipliers.

Outline Drawing

Dimensions in mm

Part Maximum Maximum1

Capacitance Number E.S.R Ripple Current(Tape & Reel) 100kHz/20°C 100kHz/105°C

(µF) (Ω) (Amps)2.0 Vdc

100 ESRD101M02R 0.025 1.8 1.8180 ESRD181M02R 0.018 2.2 3.1220 ESRD221M02R 0.018 2.2 3.1

82 ESRD820M0ER 0.025 1.8 1.8150 ESRD151M0ER 0.018 2.2 3.1180 ESRD181M0ER 0.018 2.2 3.1

56 ESRD560M04R 0.025 1.8 1.8120 ESRD121M04R 0.018 2.2 3.1

6.3 Vdc10 ESRD100M06R 0.060 1.0 1.822 ESRD220M06R 0.045 1.3 1.833 ESRD330M06R 0.035 1.6 1.847 ESRD470M06R 0.025 1.8 1.8100 ESRD101M06R 0.018 2.2 3.1

8.0 Vdc8.2 ESRD8R2M08R 0.060 1.0 1.815 ESRD150M08R 0.045 1.3 1.822 ESRD220M08R 0.035 1.6 1.833 ESRD330M08R 0.025 1.8 1.868 ESRD680M08R 0.018 2.2 3.1

12.5 Vdc4.7 ESRD4R7M12R 0.080 1.0 1.810 ESRD100M12R 0.060 1.0 1.815 ESRD150M12R 0.050 1.3 1.822 ESRD220M12R 0.040 1.3 1.8

16.0 Vdc2.2 ESRD2R2M16R 0.110 1.0 1.84.7 ESRD4R7M16R 0.080 1.0 1.86.8 ESRD6R8M16R 0.070 1.0 1.88.2 ESRD8R2M16R 0.060 1.0 1.8

Case Height

H ( ±0.1 mm )

2.5 Vdc

4.0 Vdc

ESRD Surface Mount


Chip and SMT

Capacitors

CORNELLDUBILIER



Ratings

Outline Drawing

Dimensions in mm

ESRE Surface Mount, High Capacitance


Capacitance Number E.S.R. Ripple Current(Tape & Reel) 100kHz/20°C 100kHz/105°C

(µF) (Amps)

2.0 Vdc

270 ESRE271M02R 0.015 3.0

330 ESRE331M02R 0.015 3.0

2.5 Vdc

220 ESRE221M0ER 0.015 3.0

270 ESRE271M0ER 0.015 3.0

4.0 Vdc

180 ESRE181M04R 0.015 3.0

6.3 Vdc

150 ESRE151M06R 0.015 3.0

8.0 Vdc

100 ESRE101M08R 0.015 3.0


(Ω)




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors SPA Capacitors

Solid Polymer Aluminum Capacitors

Ratings

Outline Drawing

Dimensions in mm

ESRL Surface Mount, Very Low Profile (1.1mm High)



Capacitance Number E.S.R. Ripple Current(Tape & Reel) 100kHz/20°C 100kHz/105°C

(µF) (Amps)

2.0 Vdc

68 ESRL680M02R 0.035 1.6

2.5 Vdc

56 ESRL560M0ER 0.035 1.6

4.0 Vdc

39 ESRL390M04R 0.035 1.6

6.3 Vdc

33 ESRL330M06R 0.035 1.6

8.0 Vdc

22 ESRL220M08R 0.035 1.6


Chip and SMT

Capacitors

CORNELLDUBILIER



SpecificationsOperating Temperature Range; -55°C to +105∫C, at 100% rated voltage

Surge Voltage; 125% of the rated working Vdc

Capacitance Range; 2.2 µF to 330 µF

Capacitance Tolerance; ±20% at 120 Hz and +20°C

DC Leakage Current (DCL); After a two minute application of the ratedworking voltage at +20°C:

2V - 4V: I ≤ 0.06CV

6.3V - 16V: I ≤ 0.04CV or 3µA (whichever greater)

Dissipation Factor (DF); The ratio of the capacitorís equivalent seriesresistance to its reactance at 120Hz and +20°C. ESRL & ESRD (1.8 mm ht.): D.F. is .06 Max. ESRE & ESRD (3.1 mm ht.): D.F. is .10 Max.

Resistance to Soldering Heat; Heat the capacitors at 235°C in an oven for 200seconds. The capacitors will meet the followinglimits after stabilizing at 20°C:

∆C = ±10% of the initial measured value

DF ≤ the initial specified value

DCL ≤ the initial specified value

Moisture Resistance; After 500 hours storage at +60°C and 90 to 95%R.H. without load, the capacitor will meet thefollowing limits:

∆C = +70%/-20% of the initial measured value (2.0 Vdc, 2.5 Vdc), +60%/-20% of the initial measured value (4.0 Vdc), +50%/-20% of the initial measured value (6.3 Vdc), +40%/-20% of the initial measured value (all other voltages)

DF ≤ two times the initial specified value


Life Test; Apply rated DC working voltage at 105°C for1000 hours, and then stabilize them to +20°C.Capacitors will meet the following limits:




Shelf Life Test; Shelf life is typically 5 to 10 years. Acceleratedtest: after 500 hours at 105°C, capacitors will meetthe following limits after stabilization at 20°C:




Shear Test;No damage shall be visible after subjecting amounted capacitor to a side force of 5 N for 10seconds

Vibration;

No abnormal change shall occur to capacitors thathave been soldered (and attached) to a board whensubjected to a vibration of 1.5 mm amplitude thatis varied from 10 Hz to 2000 Hz in 20 min. cycles.The test duration is 2 hours for each right angledirection (total 6 hours). Capacitance is monitoredduring the last cycle of the test for stablilty.




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Tape Specifications

W3.0± E F

¯D0.0-/1.0+

øPP1

2.0± P2A

2.0±B

2.0± t1

21 57.1 5.5 5.1 4 8 2 7.7 6.4 4.0

APSepyT

LRSEDRSE

).tHmm8.1(DRSE

).tHmm1.3(ERSE

t2 2.0±4.1 2.0±1.2 2.0±4.3 2.0±5.4

Reel Specifications

2±A .nimB 5.0±C 8.0±D 5.0±E 1±W t

033 05 0.31 0.12 0.2 41 3

mm

mm

Tol.: ± 0.1 mm unless otherwise specified

0

2

4

6

8

10

-60 -20 20 60 100Temperature (°C)

DF

( %

)

-20

-10

0

10

20

-60 -20 20 60 100Temperature (°C)

∆C

( %

)

Capacitance Change at 120 Hz Dissipation Factor at 120 Hz

Typical Temperature Characteristics

10µF/6.3V10µF/6.3V

Design kits containing various ratings are available through the CDE Web site.

Design Kits


Chip and SMT

Capacitors

CORNELLDUBILIER


SPA CapacitorsSolid Polymer Aluminum CapacitorsTypical Impedance and Equivalent Series Resistance

0.001

0.010

0.100

1.000

10.000

100.000

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Oh

ms

ESRE101M08R100uF/8Vdc

Impedance/E.S.R.


Impedance/E.S.R.


Impedance/E.S.R.

0.001

0.010

0.100

1.000

10.000

100.000

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Oh

ms

ESRD680M08R68uF/8V

Impedance/E.S.R.

ESRD121M04R120uF/4V

Impedance/E.S.R.

ESRD181M02R180uF/2V

Impedance/E.S.R.

ESRD (3.1mm Ht.)

ESRE




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


0.001

0.01

0.1

1

10

100

1000

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Oh

ms

Equivalent Series Resistance

10uF Impedance22uF Impedance33uF Impedance47uF Impedance

Typical Impedance and Equivalent Series ResistanceESRD - 6.3 Vdc

ESRD - 12.5 Vdc

0.001

0.01

0.1

1

10

100

1000

0.1 1 10 100 1000 10000 100000Frequency (kHz)

Oh

ms

8.2uF Impedance 15uF Impedance 22uF Impedance 33uF Impedance


ESRD - 8.0 Vdc

0.001

0.01

0.1

1

10

100

1000

0.1 1 10 100 1000 10000 100000Frequency (kHz)

Oh

ms


4.7uF Impedance 10uF Impedance 15uF Impedance 22uF Impedance

ESRD - 16.0 Vdc

0.001

0.01

0.1

1

10

100

1000

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Oh

ms


2.2uF Impedance4.7uF Impedance6.8uF Impedance8.2uF Impedance


Chip and SMT

Capacitors

CORNELLDUBILIER



Typical Temperature CharacteristicsImpedance at 100 kHz E.S.R. at 100 kHz

Impedance at 400 kHz E.S.R. at 400 kHz

0

0.025

0.05

0.075

0.1

-60 -40 -20 0 20 40 60 80 100 120

Temperature (°C)

Ohm

s

8.2 µF / 16 Vdc

22 µF / 12.5 Vdc

47 µF / 6.3 Vdc

0

0.1

0.2

0.3

0.4

0.5

-60 -40 -20 0 20 40 60 80 100 120

Temperature (°C)

Oh

ms

8.2 µF / 16 Vdc

22 µF / 12.5 Vdc

47 µF / 6.3 Vdc

0

0.1

0.2

0.3

0.4

0.5

-60 -40 -20 0 20 40 60 80 100 120Temperature (°C)

Oh

ms

8.2 µF / 16 Vdc

22 µF / 12.5 Vdc

47 µF / 6.3 Vdc

0

0.025

0.05

0.075

0.1

-60 -40 -20 0 20 40 60 80 100 120

Temperature (°C)

Oh

ms

8.2 µF / 16 Vdc

22 µF / 12.5 Vdc

47 µF / 6.3 Vdc




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Capacitance Change vs Time (at 105°C)

-20

-10

0

10

0 500 1000 1500 2000

Time (Hours)

∆C

(%

)

Aluminum Electrolytic Capacitor (6.3 mm Dia.)

Type ESRD

Life Expectancy

Endurance Test Data

0

5

10

0 500 1000 1500 2000Time (Hours)

DC

L (µ

A)

Type ESRD Aluminum ElectrolyticCapacitor (6.3mm Dia.)

DC Leakage Current vs Time (at 105°C)

Note: Failure limit is 100% impedance increase at 400 kHz.

10

100

1,000

10,000

100,000

1,000,000

10,000,000

100,000,000

1,000,000,000

50 60 70 80 90 100 110 120

Temperature (∞C)

Lif

e E

xpec

tan

cy (

ho

urs

)

35%

55%

65%

75%

85%

45%

Life Expectancy vs Temperature and Relative Humidity


Chip and SMT

Capacitors

CORNELLDUBILIER



Shelf LifeWhen stored at room temperature, in lowhumidity, and out of direct sunlight, SPA capacitorshave a storage life of 5 to 10 years. Storage at highhumidity over long periods of time can cause theDC leakage current to increase. However, the ap-plication of rated voltage will reduce the DC leak-age current to normal limits.

Rated VoltageThis is the maximum voltage that the capacitor hasbeen designed to withstand continuously at ratedtemperature.

Solid polymer aluminum capacitors are quiterugged and may be operated continuously at ratedvoltage. Voltage derating does not significantlyincrease the life expectancy of the capacitor. Atvoltage levels equal to or less than rated voltage,the capacitor will not short circuit (even at end oflife). In fact it can self heal. A polymer aluminumcapacitor can be operated over a lifetime at full ratedvoltage without worry of short circuiting.However, if subjected to sufficient over voltageor reverse voltage, a SPA capacitor can fail shortcircuit.

Reverse VoltageSPA capacitors are polarized and are not intendedto be used with reversed voltage. They canwithstand reverse voltage pulses or transients upto 20% of the rated voltage, and they are capableof operating with up to 10% of the rated voltagewhen reverse voltage is applied continuously.

Ripple Current/Ripple VoltageAC voltage as part of the capacitorís DC biasvoltage will cause current to flow through thecapacitor. This ripple current flows through thecapacitorís equivalent series resistance generatingheat. The heat increases the capacitorís internal

Application Notes

0

5

10

15

20

25

30

35

10,000 100,000 1,000,000

Frequency (Hz)

Tem

per

atu

re R

ise

(°C

)

3.0 Arms

2.5 Arms

2.0 Arms

1.5 Arms

1.0 Arms

0.5 Arms

Peaks of the AC ripple voltage should not exceedthe rated voltage or cause voltage reversal.

temperature. Exceeding the specified maximumripple current will overheat and damage thecapacitor. The maximum ripple current ratings aregiven in the ratings tables.

Temperature Rise from Ripple Current(47µF/6.3Vdc)

)zHk(ycneuqerF 01 02 05 001 052 005 000,1

sreilpitluMycneuqerFtnerruCevaWeniSrof

C°501+ot02+6.0 7.0 8.0 0.1 1.1 2.1 3.1

Ripple Current Frequency Multipliers




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Recommended Circuit Board Mounting Pads

Dimensions in mm

Capacitor Outline

CleaningThe capacitors can withstand for 5 minutes at 60°Cthe following cleaning solvents by dipping orultrasonic methods:

Pine Alpha ST-100SSunelec B-12DK Be-Clear CW-5790Aqua Cleaner 210SEPCold Cleaner P3-375Telpen Cleaner EC-7RClean-Thru 750H, 750L, and 710MTechno-Cleaner 219Techno-Care FRW-1, FRW-17, & FRV-1

After cleaning, wash the circuit board with waterfor about 3 minutes, and dry at 100°C for 20minutes.

Heat Stress while SolderingDC leakage current can increase after soldering,but it will return to the initial level after applyingvoltage.

When using a soldering iron to mount thecapacitor, the iron should have a maximumtemperature of 350°C and soldering should notexceed 10 seconds.

200

210

220

230

240

250

0 10 20 30 40 50 60

Time at 200°C or above (seconds)

Pea

k Te

mpe

ratu

re (

°C)

Reflow SolderingThe following graph gives the maximumrecommended capacitor surface temperatureduring reflow soldering.

ReclamationThe resin case of a capacitor can be damaged bythe heat stress of soldering if it has absorbedexcessive moisture. Capacitors suspected ofhaving been exposed to high humidity can bereclaimed by placing them in an oven at 50°C for100 Hours.


Chip and SMT

Capacitors

CORNELLDUBILIER



ConstructionConstruction is a unique combination of theelements of aluminum electrolytic and solidtantalum capacitors.

Like conventional aluminum electrolytic capacitors,the anode in SPA capacitors is an aluminum plateon which an aluminum oxide layer has been builtup by an electrolysis process. The aluminum oxideserves as the dielectric in both SPA and conven-tional aluminum electrolytics.

The dielectric in solid tantalum capacitors istantalum pentoxide which is built upon a tantalumpellet anode.

A highly conductive polymer electrolyte film isdeposited over the aluminum oxide dielectric in SPAcapacitors. Carbon and silver paint are used tofinish the capacitorís cathode. This is similar towhat is used in solid tantalum capacitors, wheremanganese dioxide is used as the electrolyte.

The capacitor element is encased in a molded resinthat is capable of meeting the UL-94,V0flammability rating. The terminals are solder coatedcopper clad steel.

Up to 50 Years Life

Ultra Low E.S.R. and High Ripple Current Capability

SPA SMT capacitors are polarized, aluminumcapacitors which use a highly conductive solidpolymer as the electrolyte. They have reliabilityadvantages over both aluminum and solid tantalumelectrolytic capacitors. Unlike aluminum capacitors,there is no liquid electrolyte that can evaporate andcause a failure. Unlike solid tantalum which can

Life expectancy curves show 200,000 hoursexpected life at full rated voltage and normalambient conditions.

fail short and burn, SPA capacitors graduallybecome open circuits after 25 to 50 yearsoperation.

The equivalent series resistance (e.s.r.) of solidpolymer aluminum capacitors is much lower thanthe e.s.r. of solid tantalum capacitors. This resultsin a much higher ripple current handling capability.The e.s.r. is even lower than the new tantalum-polymer hybrid capacitors. SPA’ s ultra-lowresistance magic is in the solid conductive polymer.

The series resistance of electrolytic capacitorsis largely determined by the resistivity of theelectrolyte. Because the resistivity of SPA’spolymer electrolyte is several orders of magnitudeless than that of other electrolytes, the equivalentseries resistance is almost zero.




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

-60 -40 -20 0 20 40 60 80 100 120Temperature (°C)

Imp

edan

ce (

oh

ms)

Aluminum Electrolytic

TantalumElectrolytic

SPA

0.001

0.01

0.1

1

10

100

1000

0.0001 0.001 0.01 0.1 1 10 100

Frequency (MHz)

Imp

edan

ce (

Oh

ms)

Aluminum Electrolytic

Tantalum Electrolytic

Film

SPA

SPA Compared to Other Electrolytics

SPA capacitors have stable impedance over the entire temperature range.

SPA capacitors have lower impedance at high frequencies than the same values ofwet electrolyte aluminum capacitors and solid tantalum capacitors.

10 µF @ 1 MHz


Chip and SMT

Capacitors

CORNELLDUBILIER



SPA vs Solid Tantalum

0.01

0.1

1

10

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

e.s.

r. (

Oh

ms)

Tantalum100uF/6.3Vdc

7.3x4.3x2.8mm

SPA10uF/6.3Vdc

7.3x4.3x1.8mm

SPA47uF/6.3Vdc

7.3x4.3x1.8mm

100µF 47µF Tantalum Solid Polymer Aluminum

Capacitor Electrolytic Capacitor

Equivalent series Impedance Equivalent series ImpedanceFrequency resistance Magnitude |Z| resistance Magnitude |Z|

(ohm) (ohm) (ohm) (ohm)

100kHz 0.12 0.12 0.012 0.0351.0MHz 0.08 0.08 0.010 0.01010MHz 0.08 0.19 0.016 0.035

At 1 MHz the Solid Polymer Aluminum capacitor will provide almost 8 times more rippleand noise attenuation (.08/.01) as compared to the tantalum capacitor.




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Type ESRD’s impedance and equivalent series resistance are lower at highfrequencies than that of tantalum-polymer hybrid type capacitors.

SPA vs Tantalum-Polymer Hybrid

0.01

0.1

1

10

100

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Oh

ms

TantalumPolymer Hybrid

150µF/6.3V

Type ESRD47µF/6.3V

0

20

40

60

80

100

120

140

160

180

200

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Cap

acit

ance

(µF

)

Type ESRD47µF/6.3Vdc

Tantalum -Polymer Hybrid150µF/6.3Vdc

Impedance

e.s.r.

Note the capacitance roll off of the tantalum-polymer capacitor at highfrequencies. The tantalum-polymer capacitor loses approximately 2/3 ofits capacitance at 100kHz.


Chip and SMT

Capacitors

CORNELLDUBILIER


SPA Type ESRHSMT Solid Polymer Aluminum Electrolytic Capacitors

Ratings

Solid polymer aluminum capacitors are now available witha +125°C temperature rating. CDE’s type ESRHcapacitors are rated at +125°C for 1000 hours whenoperated at 3/4 of the 105°C rated voltage. SPAelectrolytic capacitors feature extremely low e.s.r.which yields a capacitor with very low high frequencyimpedance and high ripple current capability. When lowe.s.r. is your requirement, one type ESRH capacitor canreplace three or more tantalum or aluminum electrolyticcapacitors. The solid electrolyte in a polymer aluminumcapacitor results in a long (and ignition free) life, andthe 7.3 x 4.3 footprint is compatible with "D" case solidtantalum capacitors.

Highlights• Lowest e.s.r.:< 15 m Ω at 100 kHz up to 3.0 A ripple at 100 kHz• "D"case footprint: 7.3(L)x4.3(W)

• Ignition Free

Specifications

Capacitance (µF)

Rated Voltage WVDC

CDE Tape* and Reel

Part Number (2000 pcs/reel)

Maximum E.S.R. at

100 kHz/20°C (Ohms)

Ripple Current at 100 kHz**

+20 to +125°C (Arms)

H ± 0.1 (mm)

180 2 ESRH181M02R 0.018 2.0 3.1150 2.5 ESRH151M0ER 0.018 2.0 3.1120 4 ESRH121M04R 0.018 2.0 3.1100 6.3 ESRH101M06R 0.018 2.0 3.168 8 ESRH680M08R 0.018 2.0 3.1

270 2 ESRH271M02R 0.015 3.0 4.2220 2.5 ESRH221M0ER 0.015 3.0 4.2180 4 ESRH181M04R 0.015 3.0 4.2150 6.3 ESRH151M06R 0.015 3.0 4.2100 8 ESRH101M08R 0.015 3.0 4.2

*12 mm wide tape -- 13"diameter reel **See ripple current frequency multipliers table.

Operating Temperature Range: -55°C to +105°C, at rated voltage (+125°C at .75 x rated voltage)

Capacitance Tolerance: ±20% at 120 Hz and +20°C

Dissipation Factor (DF): ≤ 0.10 at 120Hz and +20°C.

Surge Voltage: 1.25 x rated voltage

DC Leakage current (after 2 min.): 2 - 4 Vdc

6.3 - 8 Vdc

Outline Drawing

Ultra-Low E.S.R.

+125°C

High Frequency Ripple FiltersPower Supply DecouplingBypass Filtering




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

0.001

0.01

0.1

1

10

100

0.1 1 10 100 1000 10000 100000

Frequency (kHz)

Oh

ms ESRH680M08R

68 µF/8 VImpedance/E.S.R.

ESRH271M02R270 µF/2 V

Impedance/E.S.R.

Polarity Stripe (Anode)

+

Capacitance

W.V. CodeD = 2.0VE = 2.5VG = 4.0VJ = 6.3VK = 8.0V

Markings

Lot No.

SPA Type ESRHSMT Solid Polymer Aluminum Electrolytic Capacitors

Life Test:Apply rated DC working voltage at 105°C (or .75xWVDC at 125°C) for1000 hours, and then stabilize them to +20°C. Capacitors will meet thefollowing limits: ∆C = ±10% of the initial measured value DF & DCL ≤

the initial specified value

Shelf Life Test:Shelf life is typically 5 to 10 years. Accelerated test: after 500 hours at125°C, capacitors will meet the following limits after stabilization at 20°C: ∆C = ±10% of the initial measured value DF & DCL ≤ the initial specified value

Typical Impedance & E.S.R.

Specifications (continued)

Moisture Resistance:After 500 hours storage at +60°C and 90% R.H. without load,the capacitor will meet the following limits: ∆C = +70%/-20% of the initial measured value (2.0 & 2.5 Vdc),

+60%/-20% of the initial measured value (4.0 Vdc),+50%/-20% of the initial measured value (6.3 Vdc),+40%/-20% of the initial measured value (8.0 Vdc).

DF ≤ two times the initial specified value DCL ≤ the initial specified value

Resistance to Soldering Heat:Capacitors withstand being heated in an oven at 235°C for 200 sec..

Frequency (kHz) 10 20 50 100 250 500 1000

0.6 0.7 0.8 1.0 1.1 1.2 1.3Frequency Multipliers for Sine

Wave Current (+20 to +125°C)

200

210

220

230

240

250

0 10 20 30 40 50 60

Time at 200°C or above (seconds)

PeakTemperature

(°C)

Land Pattern

mm

Capacitor Outline

Soldering:SPA capacitors are designed for reflow soldering. P r e h e a t t h ecapacitors at 160°C for a maximum of 120 seconds. The time at orabove 200°C on the surface of the capacitor should be per thefollowing chart:

Ripple current frequency multipliers:

2.8

4.0

8.8


Chip and SMT

Capacitors

CORNELLDUBILIER


High-Frequency, High-Stability Chip for Instruments and RF

With self-resonant frequencies typically above

one gigahertz for popular RF capacitance values

and with a Q above 2,000, Type MC capacitors

are the answer for high-frequency applications

like flight radio and cable television. The natural

mica dielectric retains its high-Q to many

megahertz, so higher and higher frequency

applications are limited by the circuit inductance,

not the Type MC capacitor.

Performance Highlights• Voltages: 100 Vdc, 500 Vdc, and 1000 Vdc• Capacitance Range: .5 pF to 2,200 pF• Capacitance Tolerance: ±0.25% to ±5%• Temperature Range: –55°C to +125°C• Low impedance to beyond 1 GHz• Near-zero capacitance change, all environments

• Available in tight tolerance exact values• Easy to attach to printed circuit boards• Case sizes 0805, 1210, 1812, and 2220• Handles pulses with dV/dt>20,000 V/µs• Withstands 200% rated voltage

Ratings

Cap Catalog CasepF Number Type

100 Vdc1 MC08CA010D 08052 MC08CA020D 08053 MC08CA030D 08054 MC08CA040D 08055 MC08CA050D 08056 MC08CA060D 08057 MC08CA070D 08058 MC08CA080D 08059 MC08CA090D 0805

10 MC08CA100D 0805

12 MC08EA120J 080515 MC08EA150J 080518 MC08EA180J 080520 MC08EA200J 080522 MC08EA220J 080524 MC08EA240J 080527 MC08EA270J 080530 MC08EA300J 080533 MC08FA330J 080536 MC08FA360J 080539 MC08FA390J 080543 MC08FA430J 080547 MC12FA470J 121050 MC12FA500J 121051 MC12FA510J 1210


100 Vdc56 MC12FA560J 121062 MC12FA620J 121068 MC12FA680J 121075 MC12FA750J 121082 MC12FA820J 121091 MC12FA910J 1210

100 MC12FA101J 1210110 MC12FA111J 1210120 MC12FA121J 1210130 MC12FA131J 1210

150 MC12FA151J 1210160 MC12FA161J 1210180 MC12FA181J 1210200 MC12FA201J 1210220 MC12FA221J 1210

240 MC12FA241J 1210250 MC12FA251J 1210270 MC12FA271J 1210300 MC12FA301J 1210330 MC12FA331J 1210360 MC12FA361J 1210390 MC12FA391J 1210430 MC12FA431J 1210250 MC18FA251J 1812270 MC18FA271J 1812


100 Vdc300 MC18FA301J 1812330 MC18FA331J 1812360 MC18FA361J 1812390 MC18FA391J 1812430 MC18FA431J 1812470 MC18FA471J 1812500 MC18FA501J 1812510 MC18FA511J 1812560 MC18FA561J 1812620 MC18FA621J 1812

680 MC18FA681J 1812750 MC18FA751J 1812820 MC18FA821J 1812910 MC22FA911J 2220

1000 MC22FA102J 2220

1100 MC22FA112J 22201200 MC22FA122J 22201500 MC22FA152J 22201800 MC22FA182J 22202000 MC22FA202J 22202200 MC22FA222J 2220

Type MC, Surface-Mount Mica Chip Capacitors




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Ratings

Typical Characteristic CurvesQ vs. CAPACITANCE CAPACITANCE vs. FREQUENCY Q vs. FREQUENCY

% CAPACITANCE CHANGE vs. TEMPERATURE RESONANT FREQUENCY vs. CAPACITANCE


500 Vdc1 MC12CD010D 12102 MC12CD020D 12103 MC12CD030D 12104 MC12CD040D 12105 MC12CD050D 12106 MC12CD060D 12107 MC12CD070D 12108 MC12CD080D 12109 MC12CD090D 1210

10 MC12CD100D 121012 MC12ED120J 121015 MC12ED150J 121018 MC12ED180J 121020 MC12ED200J 121022 MC12ED220J 121024 MC12ED240J 121027 MC12ED270J 121030 MC12ED300J 121033 MC12FD330J 121036 MC12FD360J 121039 MC12FD390J 121043 MC12FD430J 121047 MC12FD470J 121050 MC12FD500J 121051 MC12FD510J 121056 MC12FD560J 121062 MC12FD620J 121068 MC12FD680J 121075 MC12FD750J 121082 MC12FD820J 121091 MC12FD910J 1210

100 MC18FD101J 1812110 MC18FD111J 1812

Cap Catalog Case pF Number Type

500 Vdc120 MC18FD121J 1812130 MC18FD131J 1812150 MC18FD151J 1812100 MC12FD101J 1210110 MC12FD111J 1210120 MC12FD121J 1210130 MC12FD131J 1210150 MC12FD151J 1210160 MC18FD161J 1812180 MC18FD181J 1812200 MC18FD201J 1812220 MC18FD221J 1812240 MC18FD241J 1812250 MC18FD251J 1812270 MC18FD271J 1812300 MC18FD301J 1812330 MC18FD331J 1812360 MC18FD361J 1812390 MC18FD391J 1812430 MC18FD431J 1812470 MC18FD471J 1812500 MC22FD501J 2220510 MC22FD511J 2220560 MC22FD561J 2220620 MC22FD621J 2220680 MC22FD681J 2220750 MC22FD751J 2220820 MC22FD821J 2220910 MC22FD911J 2220

1000 MC22FD102J 22201100 MC22FD112J 22201200 MC22FD122J 2220


1000 Vdc1 MC12CF010D 12102 MC12CF020D 12103 MC12CF030D 12104 MC12CF040D 12105 MC12CF050D 12106 MC12CF060D 12107 MC12CF070D 12108 MC12CF080D 12109 MC12CF090D 1210

10 MC12CF100D 121012 MC12EF120J 121015 MC12EF150J 121018 MC12EF180J 121020 MC12EF200J 121022 MC12EF220J 121024 MC12EF240J 121027 MC12EF270J 121030 MC12EF300J 121033 MC12FF330J 121036 MC12FF360J 121039 MC12FF390J 121043 MC12FF430J 121047 MC12FF470J 121050 MC12FF500J 1210

Cap Catalog Case pF Number Type

1000 Vdc100 MC22FF101J 2220110 MC22FF111J 2220120 MC22FF121J 2220130 MC22FF131J 2220150 MC22FF151J 2220160 MC22FF161J 2220180 MC22FF181J 2220200 MC22FF201J 2220220 MC22FF221J 2220240 MC22FF241J 2220250 MC22FF251J 2220270 MC22FF271J 2220300 MC22FF301J 2220330 MC22FF331J 2220360 MC22FF361J 2220390 MC22FF391J 2220430 MC22FF431J 2220470 MC22FF471J 2220500 MC22FF501J 2220510 MC22FF511J 2220560 MC22FF561J 2220620 MC22FF621J 2220680 MC22FF681J 2220750 MC22FF751J 2220820 MC22FF821J 2220910 MC22FF911J 2220

1000 MC22FF102J 22201100 MC22FF112J 22201200 MC22FF122J 22201500 MC22FF152J 2220

IMPEDANCE vs. FREQUENCY


Chip and SMT

Capacitors

CORNELLDUBILIER



Specifications

MarkingVoltage Colorbrown=100 Vdc

R1 green=500 VdcBRN/GRN=1000 Vdc

Capacitance Code

Base Code Base CodeValue Ltr. Value Ltr.

10 A 40 d11 B 43 R12 C 45 e13 D 47 S15 E 50 f16 F 51 T18 G 56 U20 H 60 m22 J 62 V24 K 68 W25 a 70 n27 L 75 X30 M 80 t33 N 82 Y35 b 90 y36 P 91 Z39 Q

Multiplier CodeNo.

X 0.1 0X 1 1X 10 2X 100 3X 0.01 9

Capacitance is within tolerancewhen measured as follows:

1–1000 pF @ 1 MHz> 1000 pF @ 1 kHz

Dissipation Factor is no morethan 0.1% when measured asabove.

Quality Factor (Q) is as followswhen measured at 1 MHz.

Capacitance Min. QRange

1 to 80 pF 500 to 3000

>80 pF 3000

Insulation Resistance is noless than 100 GΩ when measuredat 100 Vdc.

Withstanding Voltage is twotimes the rated voltage and can beapplied up to 5 seconds withoutdamage.

Life Test: Subject capacitors to125±3°C with 1.5 times rated volt-age applied for 2000 (+72,–0)hours. There will be no visual dam-age and the capacitors will meetthe limits of the table below.

Vibration Resistance: Subjectthe capacitors to simple harmonicmotion with an amplitude of 0.06inches; vary the frequency uni-formly from 10 to 55 Hz and returnto 10 Hz, all in one minute. Repeatthat cycle continuously for twohours in each of three mutuallyperpendicular directions. There willbe no visual damage and the ca-pacitors will meet the limits of thetable below.

Bending Test: Solder attach thecapacitors to printed-circuit boards.Suspend each board between twoedges separated 3.5 inches with thecapacitor in the center and on the

underside. Press in the center of thesuspension until the board flexesdownward 0.1 inches. There will beno visual damage and the capaci-tors will meet the limits of the tablebelow during and after the bend-ing.

Moisture Resistance: Subjectthe capacitors to 40±2°C at 90 to95% humidity for 500 (+24,–0)hours. Return to room ambient for24 hours. There will be no visualdamage and the capacitors willmeet the limits of the table below.

Temperature Coefficientand Drift: Measure the capaci-tors’ capacitance at 25°C, –55°C,25°C, 125°C, and at 25°C—all±3°C—after stabilizing at each tem-perature. The capacitance will meetthe limits of the Characteristic tablein Ordering Information.

Heat Resistance: Subject the ca-pacitors to 125±2°C for 2 (+1,–0)hours. Then the insulation resis-tance will be no less than 5GΩ.

Solderability: After 2±0.5 sec-onds in molten solder with 2.5% sil-ver at 270±5°C, solder coverage willbe no less than 90% when exam-ined at 10X magnification for flowsoldering and no less than 75% forreflow soldering.

Solder Heat Resistance: Sub-ject the capacitors to molten solderas above with 5 minutes preheatingat 150±3°C. There will be no visualdamage and the capacitors willmeet the limits of the table below.

Test Withstand Insulation Capacitance DF QVoltage Resistance (whichever >)

Life Test IL IL IV±2% or ±.5pF 150% max IL 2/3xILVibration Resistance IL 30 GΩ IV±1% or ±1pF IL ILBending Test IL IV±.5% or ±1pF ILMoisture Res. IL 30 GΩ IV±3% or ±.5pF 150% max IL 2/3xILSolderability IL IL IL IL ILHeat Resistance 5 GΩSolder Heat Res. IL 30 GΩ IV±.5% or ±1pF IL IL

IL=Initial Limit IV=Initial Value

After-Test Limits

Example:R1 = 43 pF




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors



Order by complete part number, as below. For other options,write your requirements on your quote request.

Surface-Mount Chip Mica Capacitors

MC 22 F D 122 J – T

CDE Case Voltage CapacitanceType Code A = 100 Vdc 010-1pF

D = 500 Vdc 1R8=1.8pFF = 1000 Vdc (187)=187pF

182=1800pFCharacteristic

Char Capacitance Temperature CapacitanceCode Range pF Coefficient ppm/°C Drift Tol. Code Tolerance Capacitance Range

C 0.5 to 10 100±100 ±(.5% +0.1 pF) B ±0.1 pF 0.5 pF to 10 pFE 10.5 to 30 50±50 ±(.1%+0.1 pF) C ±0.25 pF 0.5 pF to 99.5 pFF 30.5 & up 25±25 ±(.05%+.1 pF) D ±0.5 pF 0.5 pF to 10 pF

F ±1 pF 0.5 pF to 10 pF

C ±0.25% 100 pF and upD ±0.5% 50.5 pF and upF ±1 % 25.5 pF and upG ±2% 13 pF and upJ ±5% 10.5 pF and up


Available Capacitance ValuesCapacitance, pF Minimum

Case Cap.Code 100 Vdc 500 Vdc 1000 Vdc Step, pF

08 0.5 to 43 N/A N/A 0.512 43.5 to 100 0.5 to 100 N/A 0.512 101 to 430 101 to 150 N/A 1.012 1 to 50 1.018 250 to 820 100 to 470 N/A 1.022 821 to 1000 471 to 1000 N/A 1.022 1010 to 2000 1010 to 1200 100 to 1500 10.0

Standard Minimum Shipping QuantitiesReel Packed

Case Codes 08 & 12: 3,000/reelCase Codes 18 & 22: 1,000/reel

Bulk Packed100 per bag

Case SizesINCHES MILLIMETERS

Case Case I ICode Type L W H min/max L W H min/max

08 0805 .079 .049 .055 .008/.035 2.0 1.25 1.4 .2/.9

12 1210 .126 .098 .079 .012/.043 3.2 2.5 2.0 .3/1.1

18 1812 .177 .126 .079 .012/.051 4.5 3.2 2.0 .3/1.3

22 2220 .224 .197 .079* .012/.051 5.7 5.0 2.0* .3/1.3

+.02–0

+.024–.004

+.024–.008

+.016–.012

+.02–0

+.024–.004

+.024–0

+.016–.012

+.5–0

+.6–.1

+.6–0

+.4–.3

+.5–0

+.6–.1

+.6–.2

+.4–.3

010 = 1pF1R8 = 1.8pF(187)= 187pF182 = 1800pF

Length Width

—Solder-coatedNickel/Silver Termination

Height

I I

Packageleave blank for bulk

add –“T” for reelor tape

*.157 (4.0 mm) for 1000 V rating


Chip and SMT

Capacitors

CORNELLDUBILIER



Surface-Mount Chip Mica Capacitors for Auto Insertion

.078±.02(2±.5)

.83±.03(21±.8)

.51±.02(13±.5)

3.15(80)

7.0±.08(178±2)

P1 P2 P0

t

T

D

B

C

d

Carrier DimensionsItem Symbol Case Code

08 12 18 22Sprocket hole pitch P1 .157±.008 (4.0±0.2)Sprocket hole location B .069±.008 (1.75±0.2)Hole center to cavity center C .138±.002 (3.5±0.05) .217±.004 (5.5±0.1)Carrier tape width D .315±.012 (8.0±0.3) .472±.012 (12.0±0.3)Sprocket hole diameter d .059 (1.5 )Cavity pitch P0 .157± .004 (4.0±0.1) .315±.008 (8.0±0.2)Hole center to cavity center P2 .079±.004 (2.0±0.1)Cavity length L .110 (2.8 ) .150 (3.8 ) .205 (5.2 ) .246 (6.25 )Cavity width W .075±.008 (1.9±0.2) .118±.008 (3.0±0.2) .161±.008 (4.1±0.2) .217±.008 (5.5±0.2)Cavity depth T .051±.004 (1.3±0.1) .059±.004 (1.5±0.1) .071±.004 (1.8±0.1) .087±.004 (2.2±0.1)Carrier tape thickness t .012±.002 (0.3±0.05)Holder distance W1 .354 (9.0 ) .512 (13.0 )Reel thickness W2 about .47 (12) about .63 (16)

+0.2-0.1

+.008-.004

+0.2-0.1

+.008-.004

+0.2-0.1

+.008-.004

+0.2-0.1

+.008-.004

+.002-0

+0.1-0

+.08-.02

+2-0.5

+2-0.5

+.08-.02

L

W

W1

W2

.078±.02(2±0.5)




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type FCP Surface-Mount Film Chip Capacitors

Specifications

Outline Dimensions

Highlights

Type FCP stacked metallized polyphenylenesulfide (PPS) film capacitors offer high capacitanceper unit volume, stable capacitance and D.F. overa wide temperature range, and excellent highfrequency performance. Type FCP capacitorsconform to standard EIA 0805, 1206, 1210 &1913 surface mount case sizes and are packagedon tape and reel.

Stable non-inductive metallized film capacitors for timing, filtering, by-pass,and decoupling applications.

• Capacitance Range of 100 pF to .1 µF• Standard EIA 0805, 1206, 1210 & 1913 sizes

• 16 and 50 Vdc Rated Voltage• Capacitance Change from -55°C to 85°C ≤ ±.5%

Nominal Capacitance Range: 100 pF to .1µF(1 kHz at ≤5 Vrms)

Capacitance Tolerance: ±5% (J) Standard,±2% (G) Optional

Rated Voltage: 16 and 50 Vdc

Dissipation Factor (Tan δ): 0.6% Max. (1 kHzat ≤5 Vrms)

Life Test: Capacitors subjected to 1000 hoursof maximum rated temperature and 125% of therated voltage will not have any significant visualdamage, the capacitance will be within ±2% ofthe initial measured value, DF will be a maximumof .66% and IR will be a minimum of 1000Mohm.

Operating Temperature Range: -55°C to +125°C

Dielectric Strength: 175% of rated Vdc for 5seconds

Insulation Resistance: 3000 M Min. at 20°C,60s. 16 Vdc rated, test 10 Vdc; 50 Vdc rated, test50 Vdc

Construction: Stacked Metallized PolyphenyleneSulfide film

Resistance to Soldering Heat: Capacitors sub-jected to a 260°C reflow for 5 seconds will nothave any significant visual damage, dielectricstrength will be as specified, the capacitance willbe within ±3% of the initial measured value, DFwill be a maximum of .66% and IR will be aminimum of 1000 Mohm.

L ± .2

t t

T±.2

W ± .2

Case Size Outline Dimentions (In.) Case Size OutlineDimentions (mm) PackagingCode L±.008 W T±.008 t (metric) L±.2 W T±.2 t Code

0805 0.079 0.049±0.0080.035

0.018±0.010 2012 2.0 1.25±0.20.9

0.45±0.25J1

0.043 1.1 J20.035 0.9 H1

1206 0.126 0.063±0.008 0.043 0.126±0.012 3216 3.2 1.6±0.2 1.1 0.65±0.3 H20.059 1.5 H30.043 1.1 G1

1210 0.126 0.098±0.008 0.059 0.026±0.012 3225 3.2 2.5±0.2 1.5 0.65±0.3 G20.083 2.1 G30.055 1.4 E1

1913 0.189 0.130±0.0120.079

0.014±0.008 4833 4.8 3.3±0.32.0

0.35±0.2E2

0.110 2.8 E30.094 2.4 E40.071 1.8 D1

2416 0.236 0.161±0.0120.094

0.014±0.008 6041 6.0 4.1±0.32.4

0.35±0.2D3

0.110 2.8 D40.126 3.2 D5


Chip and SMT

Capacitors

CORNELLDUBILIER



Cleaning SolventsIsopropyl alcoholTrichloro ethane

Cleaning MethodsTemperature Time

Dipping 25˚C < 5 min.Vapor < 50˚C < 5 min.

Ultrasonic < 50˚C < 5 min.Dry the circuit board completely after cleaning.


FCP 0805 H 101 J - J1

Type Case Size Voltage Capacitance Code Tolerance Packaging CodeCode C = 16 Vdc

H = 50 VdcpF code

101 = 100pFJ = ±5%

(G = ±2%)See Standard Ratings Table and page1.038 for tape and reeling information

Land

Film Chip

c

a

b

SolderResist

Land Pattern

Ratings

16 Vdc0.0033 3300 FCP0805C332J-J1 0805 0.0390.0039 3900 FCP0805C392J-J1 0805 0.0390.0047 4700 FCP0805C472J-J1 0805 0.0390.0056 5600 FCP0805C562J-J1 0805 0.0390.0068 6800 FCP0805C682J-J1 0805 0.0390.0082 8200 FCP0805C822J-J2 0805 0.0470.01 10000 FCP0805C103J-J2 0805 0.0470.012 12000 FCP1206C123J-H1 1206 0.0390.015 15000 FCP1206C153J-H1 1206 0.0390.018 18000 FCP1206C183J-H1 1206 0.0390.022 22000 FCP1206C223J-H1 1206 0.0390.027 27000 FCP1206C273J-H2 1206 0.0470.033 33000 FCP1206C333J-H2 1206 0.0470.039 39000 FCP1206C393J-H3 1206 0.0630.047 47000 FCP1206C473J-H3 1206 0.0630.056 56000 FCP1210C563J-G2 1210 0.0630.068 68000 FCP1210C683J-G2 1210 0.0630.082 82000 FCP1210C823J-G3 1210 0.0870.10 100000 FCP1210C104J-G3 1210 0.087

50 Vdc0.00010 100 FCP0805H101J-J1 0805 0.0390.00012 120 FCP0805H121J-J1 0805 0.0390.00015 150 FCP0805H151J-J1 0805 0.0390.00018 180 FCP0805H181J-J1 0805 0.0390.00022 220 FCP0805H221J-J1 0805 0.0390.00027 270 FCP0805H271J-J1 0805 0.0390.00033 330 FCP0805H331J-J1 0805 0.0390.00039 390 FCP0805H391J-J1 0805 0.0390.00047 470 FCP0805H471J-J1 0805 0.0390.00056 560 FCP0805H561J-J1 0805 0.039

Capacitance Catalog Case Maximum(µF) (pf) Part Number Code Thickness (in.)

0.00068 680 FCP0805H681J-J1 0805 0.0390.00082 820 FCP0805H821J-J1 0805 0.0390.0010 1000 FCP0805H102J-J1 0805 0.0390.0012 1200 FCP0805H122J-J1 0805 0.0390.0015 1500 FCP0805H152J-J1 0805 0.0390.0018 1800 FCP0805H182J-J1 0805 0.0390.0022 2200 FCP0805H222J-J1 0805 0.0390.0027 2700 FCP0805H272J-J1 0805 0.0390.0033 3300 FCP1206H332J-H1 1206 0.0390.0039 3900 FCP1206H392J-H1 1206 0.0390.0047 4700 FCP1206H472J-H1 1206 0.0390.0056 5600 FCP1206H562J-H1 1206 0.0390.0068 6800 FCP1206H682J-H1 1206 0.0390.0082 8200 FCP1206H822J-H2 1206 0.0470.010 10000 FCP1206H103J-H2 1206 0.0470.012 12000 FCP1210H123J-G1 1210 0.0470.015 15000 FCP1210H153J-G1 1210 0.0470.018 18000 FCP1210H183J-G2 1210 0.0630.022 22000 FCP1210H223J-G2 1210 0.0630.027 27000 FCP1210H273J-G2 1210 0.0630.033 33000 FCP1210H333J-G3 1210 0.0870.039 39000 FCP1210H393J-G3 1210 0.0870.047 47000 FCP1913H473J-E1 1913 0.0630.056 56000 FCP1913H563J-E2 1913 0.0630.068 68000 FCP1913H683J-E2 1913 0.0630.082 82000 FCP1913H823J-E4 1913 0.0870.10 100000 FCP1913H104J-E3 1913 0.0870.12 120000 FCP2416H124J-D1 2416 0.0790.15 150000 FCP2416H154J-D3 2416 0.1020.18 180000 FCP2416H184J-D4 2416 0.1180.22 220000 FCP2416H224J-D5 2416 0.134

Capacitance Catalog Case Maximum(µF) (pf) Part Number Code Thickness (in.)

Size Land Dimentions (mm)Code a b c

0805 (2012) 1.0 2.7 1.11206 (3216) 2.2 3.8 1.41210 (3225) 2.2 3.8 2.31913 (4833) 2.6 6.6 3.02416 (6041) 3.8 7.8 3.8




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors


Typical Temperature Characteristics Typical Frequency Characteristics


Chip and SMT

Capacitors

CORNELLDUBILIER


mm


Reel Quantity and Dimensions

Tape Dimensions

SymbolDimensions (mm)8 mm Tape 12 mm Tape

A 178 330C 13 13D 23.5 21E 2 2N 60 80r 1 1

W1 9.5 14W2 1.2 2

Packaging Tape Width Reel Diameter Quantity perCode (mm) (mm) Reel

J1, J2 8 178 3,000H1, H2 8 178 3,000

G1, G2, G3, H3 8 178 2,000E1, E2 12 330 3,000

SymbolDimensions (mm)

J1,J2,H1,H2,H3,G1,G2,G3 E1,E2W 8.0 ±0.3 12.0 ±0.3F 3.5 ±0.05 5.5 ±0.05E 1.75 ±0.1 1.75 ±0.1P1 4.0 ±0.1 8.0 ±0.1P2 2.0 ±0.05 2.0 ±0.05P0 4.0 ±0.1 4.0 ±0.1D0 1.5 +.1/-0 dia. 1.5 +.1/-0 dia.D1 1.0 +0.2/-0 dia. 1.5 +0.2/-0 dia.

Type A±0.1 B±0.1 T±0.05 T2±.2 K±.1J1 1.55 2.3 0.25 1.3 1.2J2 1.55 2.3 0.25 1.5 1.4

H1,H2 1.9 3.5 0.25 1.5 1.4H3 1.9 3.5 0.25 1.9 1.8

G1,G2 2.8 3.5 0.25 1.9 1.8G3 2.8 3.5 0.25 2.5 2.4E1 3.8 5.1 0.30 2.0 1.9E2 3.8 5.1 0.30 2.6 2.5




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors Type FCN

Ratings Chart (Case Size by Capacitance and Voltage)

Surface Mount Film Capacitors

• General Purpose Capacitors

• 16, 50, 100, & 250 Vdc ratings

• 1000 pF to 1.0 µF

• 1206 to 6040 SMT Case Sizes

• Reflow Soldering

Highlights

Type FCN stacked metallized film SMT capacitors are the low cost,general purpose line of CDE's surface mount product offerings. They rangein capacitance from .001 to 1.0 , and are availble in voltage ratingsup to 250 Vdc

• Temperature Ranges;16 Vdc, 50 Vdc, & 100 Vdc ( < .012 µF) : -55 to +105°C

100 Vdc ( ≥ .012 µF), & 250 Vdc : -40 to +85°C

Type FCN capaci tors are designed forapplications requiring a general purposeSMT capacitor with stable temperatureand frequency characteristics similar topolyester film capacitoes. They are ideal forapplications such as EMI noise filtering,power supply input/output filters, audio ors i gna l coup l i ng , and IC power bus

bypassing or decoupl ing. FCN surfacemount capacitors have a non-inductivestacked metallized PEN film constructionwhich results in a low e.s.r. and excellenthigh frequency performance. They aredesigned to be mounted onto a circuit boardusing reflow soldering and come packagedon tape and reel.

Capacitance (pf code)

Vdc

16 1913 2416

50 1913 2416

100 1206 1210 1913 2416 2820 3022 3925

250 1913 2416 2420 2825 3925 3931 6031 6040

102

122

152

182

222

272

332

392

472

562

682

822

103

123

153

183

223

273

333

393

473

563

683

823

104

124

154

184

224

274

334

394

474

564

684

824

105


Chip and SMT

Capacitors

CORNELLDUBILIER


Packaging

Surface Mount Film CapacitorsType FCN

Ordering InformationFCN

Type

1913

Case SizeCode

VoltageC = 16 VdcH = 50 VdcA = 100VdcE = 250Vdc

C 124

CapacitanceCodepf code

124 = 120,000pf =0.12 F

J

Tolerance J = 5% K = 10%

- E1

PackagingCode

H2, H3, G2, G3

E1, E2, E3, E4, B D1, D2, D3, D4, D5, Z

U, V, X, Y

S, T

A 178 330 330 330C 13 13 13 13D 21 21 21 21E 2 2 - -N 60 80 80 80

W1 9.5 14 17.5 25.5W2 1.2 2 2 2

r 1 1 - -

Symbol

Dimensions (mm)

W 8 12 12 16 24F 3.5 5.5 5.5 7.5 11.5E 1.75 1.75 1.75 1.75 1.75

P0 4 4 4 4 4

P1 4 8 8 12 16

P2 2 2 2 2 2

D0 1.5 1.5 1.5 1.5 1.5

D1 1 1.5 - 1.5 1.5

Dimensions (mm)

SymbolS, T

H2, H3, G2, G3

E1, E2, E3, E4

D1, D2, B D3, D4, D5, Z

U, V, X, Y

Tape & Reel Specifications

Contents 100V ( .012 to 1.0 µF) O. D., Specifications, & Ratings 5 250V ( .001 to .068 µF) O. D., Specifications, & Ratings 6 250V ( .082 to 1.0 µF) O. D., Specifications, & Ratings 7 Typical FCN Frequency Characteristics 7 Land Pattern 8 Soldering Information 8 Design Kits 8

Ratings Chart 1 Ordering Information 2 Packaging 2 Tape & Reel Specification 2 Contents 2 16V & 50V Outline Drawing, Specifications, & Ratings 3 100V (.001 to .01 µF) O. D., Specifications, & Ratings 4 Typical FCN Temperature Characteristics 4

Packaging Code Quantity per ReelTape Width(mm)

Reel Dia.in. (mm)

H2H3, G2, G3

E1, E2, D1, D2E3, E4, D3, D4, D5

B, ZU, V, X, Y

S, T

88

1212121624

300020003000200015001000750

7 (178)7 (178)13 (330)13 (330)13 (330)13 (330)13 (330)




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type FCNSurface Mount Film Capacitors

Rated Voltage: 50 Vdc (40 Vac) Operating Temperature Range: -55 to +105°C Capacitance Range: 0.056 to 0.22 µF Dielectric Withstand Voltage: 87.5 Vdc for 5 seconds Capacitance Tolerance ± 5% (J) Insulation Resistance (20°C, 50 Vdc, 60 Seconds);

D.F. (20°C, 1 kHz): ≤ 1% I.R. ≥ 3000 MegΩ Max. capacitor surface temperature: 240°C

Capacitance (µF)

CDE P.N.

0.056 FCN1913H563J-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)

0.068 FCN1913H683J-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)

0.082 FCN1913H823J-E4 0.189 (4.8) 0.130 (3.3) 0.094 (2.4)

0.10 FCN1913H104J-E3 0.189 (4.8) 0.130 (3.3) 0.110 (2.8)

0.12 FCN2416H124J-D1 0.236 (6.0) 0.161 (4.1) 0.071 (1.8)

0.15 FCN2416H154J-D2 0.236 (6.0) 0.161 (4.1) 0.079 (2.0)

0.18 FCN2416H184J-D3 0.236 (6.0) 0.161 (4.1) 0.094 (2.4)

0.22 FCN2416H224J-D4 0.236 (6.0) 0.161 (4.1) 0.110 (2.8)

T ±.008 (±0.2) [in.(mm)]

L ±.008 (±0.2) [in.(mm)]

W ±.012 (±0.3) [in.(mm)]

Rated Voltage: 16 Vdc (12 Vac) Operating Temperature Range: -55 to +105°C Capacitance Range: 0.12 to 0.47 µF Dielectric Withstand Voltage: 28 Vdc for 5 seconds Capacitance Tolerance ± 5% (J) Insulation Resistance (20∞C,10 Vdc, 60 Seconds);

D.F. (20°C, 1 kHz): ≤ 1% For C ≤ 0.33 µF: I.R. ≥ 3000 MegΩFor C > 0.33 µF: I.R. = 1000 MegΩ •µF Min. Max. capacitor surface temperature: 240°C

Capacitance (µF)

CDE P.N.

0.12 FCN1913C124J-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)

0.15 FCN1913C154J-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)

0.18 FCN1913C184J-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)

0.22 FCN1913C224J-E4 0.189 (4.8) 0.130 (3.3) 0.094 (2.4)

0.27 FCN2416C274J-D1 0.236 (6.0) 0.161 (4.1) 0.071 (1.8)

0.33 FCN2416C334J-D2 0.236 (6.0) 0.161 (4.1) 0.079 (2.0)

0.39 FCN2416C394J-D3 0.236 (6.0) 0.161 (4.1) 0.094 (2.4)

0.47 FCN2416C474J-D4 0.236 (6.0) 0.161 (4.1) 0.110 (2.8)

T ±.008 (±0.2) [in.(mm)]

L ±.008 (±0.2) [in.(mm)]

W ±.012 (±0.3) [in.(mm)]

Outline Drawing

16 Vdc & 50 Vdc Ratings


Chip and SMT

Capacitors

CORNELLDUBILIER



Rated Voltage: 100 Vdc (63 Vac) Operating Temperature Range: -55 to +105°C Capacitance Range: 0.001 to 0.010 µF Dielectric Withstand Voltage: 175 Vdc for 5 seconds

Capacitance Tolerance ± 5% (J) Insulation Resistance (20°C, 100 Vdc, 60 Seconds);

D.F. (20°C, 1 kHz): ≤ 1% I.R. ≥ 3000 MegΩ Max. capacitor surface temperature: 240°C

Capacitance (µF)

CDE P.N.

0.001 FCN1206A102J-H2 0.126 (3.2) 0.063 (1.6) 0.043 (1.1)

0.0012 FCN1206A122J-H2 0.126 (3.2) 0.063 (1.6) 0.043 (1.1)

0.0015 FCN1206A152J-H2 0.126 (3.2) 0.063 (1.6) 0.043 (1.1)

0.0018 FCN1206A182J-H2 0.126 (3.2) 0.063 (1.6) 0.043 (1.1)

0.0022 FCN1206A222J-H2 0.126 (3.2) 0.063 (1.6) 0.043 (1.1)

0.0027 FCN1206A272J-H2 0.126 (3.2) 0.063 (1.6) 0.043 (1.1)

0.0033 FCN1206A332J-H3 0.126 (3.2) 0.063 (1.6) 0.059 (1.5)

0.0039 FCN1206A392J-H3 0.126 (3.2) 0.063 (1.6) 0.059 (1.5)

0.0047 FCN1206A472J-H3 0.126 (3.2) 0.063 (1.6) 0.059 (1.5)

0.0056 FCN1210A562J-G2 0.126 (3.2) 0.098 (2.5) 0.059 (1.5)

0.0068 FCN1210A682J-G2 0.126 (3.2) 0.098 (2.5) 0.059 (1.5)

0.0082 FCN1210A822J-G3 0.126 (3.2) 0.098 (2.5) 0.083 (2.1)

0.01 FCN1210A103J-G3 0.126 (3.2) 0.098 (2.5) 0.083 (2.1)

L ±.008 (±0.2) [in.(mm)]

W ±.008 (±0.2) [in.(mm)]

T ±.008 (±0.2) [in.(mm)]

t = .026 ±.012in. (0.65 ± 0.3mm)

Outline Drawing

100 Vdc Ratings

.001µF to .01µF

-3

-2

-1

0

1

2

3

-60 -40 -20 0 20 40 60 80 100 120Temperature (°C)

0

0.2

0.4

0.6

0.8

1

-60 -40 -20 0 20 40 60 80 100 120Temperature (°C)

D.F

. (%

)

Dissipation Factor Change

∆C/C

(%)

Capacitance Change

Typical type FCN Temperature Characteristics




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Rated Voltage: 100 Vdc (63 Vac) Operating Temperature Range: -40 to +85°C

Capacitance Range: 0.012 to 1.0 µF Dielectric W ithstand Voltage: 150 Vdc for 60 seconds

Capacitance Tolerance ± 10% (K) Insulation Resistance (20°C, 100 Vdc, 60 Seconds);

D.F. (20°C, 1 kHz): ≤ 1% For C ≤ 0.33 µF: I.R. ≥ 3000 MegΩ

For C > 0.33 µF: I.R. = 1000 MegΩ •µF Min. Max. capacitor surface temperature: 230°C

Capacitance (µF)

CDE P.N.

0.18 FCN2820A184K-Z 0.280 (7.1) 0.197 (5.0) 0.079 (2.0)0.22 FCN2820A224K-Z 0.280 (7.1) 0.197 (5.0) 0.094 (2.4)0.27 FCN2820A274K-Z 0.280 (7.1) 0.197 (5.0) 0.114 (2.9)0.33 FCN2820A334K-Z 0.280 (7.1) 0.197 (5.0) 0.138 (3.5)0.39 FCN3022A394K-X 0.303 (7.7) 0.217 (5.5) 0.134 (3.4)0.47 FCN3022A474K-X 0.303 (7.7) 0.217 (5.5) 0.157 (4.0)0.56 FCN3925A564K-V 0.386 (9.8) 0.248 (6.3) 0.118 (3.0)0.68 FCN3925A684K-V 0.386 (9.8) 0.248 (6.3) 0.142 (3.6)0.82 FCN3925A824K-V 0.386 (9.8) 0.248 (6.3) 0.169 (4.3)1.0 FCN3925A105K-V 0.386 (9.8) 0.248 (6.3) 0.201 (5.1)

L ±.016 (±0.4)π [in.(mm)]

W ±.016 (±0.4) [in.(mm)]

T ±.012 (±0.3) [in.(mm)]

Capacitance (µF)

CDE P.N.

0.012 FCN1913A123K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.015 FCN1913A153K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.018 FCN1913A183K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.022 FCN1913A223K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.027 FCN1913A273K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.033 FCN1913A333K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.039 FCN1913A393K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.047 FCN1913A473K-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)0.056 FCN1913A563K-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)0.068 FCN1913A683K-E4 0.189 (4.8) 0.130 (3.3) 0.094 (2.4)0.082 FCN1913A823K-E3 0.189 (4.8) 0.130 (3.3) 0.110 (2.8)0.10 FCN2416A104K-D1 0.236 (6.0) 0.161 (4.1) 0.071 (1.8)0.12 FCN2416A124K-D3 0.236 (6.0) 0.161 (4.1) 0.094 (2.4)0.15 FCN2416A154K-D4 0.236 (6.0) 0.161 (4.1) 0.110 (2.8)

L ±.008 (±0.2) [in.(mm)]

W ±.012 (±0.3) [in.(mm)]

T ±.008 (±0.2) [in.(mm)]

1 L dimension tolerance is ±.02 (±0.5) for 3925 case size.

Outline Drawing

100 Vdc Ratings

.012 µF to 1.0 µF



Chip and SMT

Capacitors

CORNELLDUBILIER



Capacitance Range: 0.001 to .068 µF Dielectric Withstand Voltage: 375 Vdc for 60 seconds


D.F. (20°C, 1 kHz): ≤ 1%

Max. capacitor surface temperature: 230°CI.R. ≥ 3000 MegΩ

Capacitance (µF)

CDE P.N.

0.001 FCN1913E102K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0012 FCN1913E122K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0015 FCN1913E152K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0018 FCN1913E182K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0022 FCN1913E222K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0027 FCN1913E272K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0033 FCN1913E332K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0039 FCN1913E392K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0047 FCN1913E472K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0056 FCN1913E562K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0068 FCN1913E682K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.0082 FCN1913E822K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.010 FCN1913E103K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.012 FCN1913E123K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.015 FCN1913E153K-E1 0.189 (4.8) 0.130 (3.3) 0.055 (1.4)0.018 FCN1913E183K-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)0.022 FCN1913E223K-E2 0.189 (4.8) 0.130 (3.3) 0.079 (2.0)0.027 FCN1913E273K-E4 0.189 (4.8) 0.130 (3.3) 0.094 (2.4)0.033 FCN1913E333K-E3 0.189 (4.8) 0.130 (3.3) 0.110 (2.8)0.039 FCN2416E393K-D2 0.236 (6.0) 0.161 (4.1) 0.079 (2.0)0.047 FCN2416E473K-D3 0.236 (6.0) 0.161 (4.1) 0.094 (2.4)0.056 FCN2416E563K-D4 0.236 (6.0) 0.161 (4.1) 0.110 (2.8)0.068 FCN2416E683K-D5 0.236 (6.0) 0.161 (4.1) 0.126 (3.2)

L ±.008 (±0.2) [in.(mm)]

W ±.012 (±0.3) [in.(mm)]

T ±.008 (±0.2) [in.(mm)]

Outline Drawing

250 VdcRatings

.001 µF to .068 µF





CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Capacitance (µF)

CDE P.N.

0.082 FCN2420E823K-B 0.236±.008 (6.0±0.2) 0.197 (5.0) 0.126 (3.2)0.10 FCN2420E104K-B 0.236±.008 (6.0±0.2) 0.197 (5.0) 0.150 (3.8)0.12 FCN2420E124K-B 0.236±.008 (6.0±0.2) 0.197 (5.0) 0.177 (4.5)0.15 FCN2825E154K-Y 0.280±.016 (7.1±0.4) 0.248 (6.3) 0.138 (3.5)0.18 FCN2825E184K-Y 0.280±.016 (7.1±0.4) 0.248 (6.3) 0.161 (4.1)0.22 FCN2825E224K-Y 0.280±.016 (7.1±0.4) 0.248 (6.3) 0.201 (5.1)0.27 FCN3925E274K-V 0.386±.020 (9.8±0.5) 0.248 (6.3) 0.154 (3.9)0.33 FCN3925E334K-V 0.386±.020 (9.8±0.5) 0.248 (6.3) 0.189 (4.8)0.39 FCN3931E394K-U 0.386±.020 (9.8±0.5) 0.315 (8.0) 0.173 (4.4)0.47 FCN3931E474K-U 0.386±.020 (9.8±0.5) 0.315 (8.0) 0.209 (5.3)0.56 FCN6031E564K-T 0.598±.020 (15.2±0.5) 0.315 (8.0) 0.146 (3.7)0.68 FCN6031E684K-T 0.598±.020 (15.2±0.5) 0.315 (8.0) 0.173 (4.4)0.82 FCN6040E824K-S 0.598±.020 (15.2±0.5) 0.394 (10.0) 0.165 (4.2)1.0 FCN6040E105K-S 0.598±.020 (15.2±0.5) 0.394 (10.0) 0.201 (5.1)

L [in.(mm)]

W ±.016 (±0.4) [in.(mm)]

T ±.012 (±0.3) [in.(mm)]


Capacitance Range: 0.082 to 1.0 µF Dielectric Withstand Voltage: 375 Vdc for 60 seconds


D.F. (20°C, 1 kHz): ≤ 1% For C ≤ 0.33 µF: I.R. ≥ 3000 MegΩFor C > 0.33 µF: I.R. = 1000 MegΩ •µF Min. Max. capacitor surface temperature: 230°C

Outline Drawing

250 VdcRatings

.082 µF to 1.0 µF


-6

-4

-2

0

2

4

6

8

10

1 10 100 1000 10000Frequency (kHz)

0

1

2

3

4

5

6

7

8

9

10

1 10 100 1000 10000

Frequency (kHz)

∆C/C

(%)

Capacitance Change

D.F

. (%

)

Dissipation Factor Change

Typical type FCN Frequency Characteristics


Chip and SMT

Capacitors

CORNELLDUBILIER


SolderingReflow method only, not to exceed two reflow processings.Halogen content of flux, solder paste and cleaner should beless than 0.1% for each.

Cleaning Solvent

Isopropyl alcohol

Cleaning MethodTemperature Time

Immersion 25°C <5min.Vapor <50°C <5min.Ultrasonic <50°C <5min.

Dry the circuit board completely after cleaning.

A

B

C

Case SizeCode1206 0.07 (1.8) 0.14 (3.6) 0.06 (1.4)

1210 0.07 (1.8) 0.14 (3.6) 0.09 (2.3)

1913 0.10 (2.6) 0.26 (6.6) 0.12 (3.0)

2416 0.15 (3.8) 0.31 (7.8) 0.15 (3.8)

2420 0.15 (3.8) 0.31 (7.8) 0.18 (4.6)

2820 0.18 (4.5) 0.35 (9.0) 0.18 (4.6)

2825 0.18 (4.5) 0.35 (9.0) 0.22 (5.7)

3022 0.20 (5.1) 0.38 (9.7) 0.20 (5.0)

3925 0.28 (7.2) 0.47 (11.9) 0.22 (5.7)

3931 0.28 (7.2) 0.47 (11.9) 0.28 (7.2)

6031 0.50 (12.6) 0.68 (17.3) 0.28 (7.2)

6040 0.50 (12.6) 0.68 (17.3) 0.35 (9.0)

A B CLand Dimensions

Land Pattern

Design Kits

Soldering InformationRecommended Reflow Soldering Conditions

in. (mm)


Capacitor Outline

Information on design kits for many CDE productsavailable at the CDE Web site.

Kits containing various ratings ofFCA, FCN, and FCP surface mount film products are offered.

Also available are kits for aluminum electrolytic,polymer aluminum, and mica surface mount capacitors.

Visit us at www.cornell-dubilier.com

30 secondsmax.

above210°C

Land

Land




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Type FCA

Ratings

Type FCA acrylic film capacitors offerhigh capacitance values in standardsurface mount case sizes. They are greatfor attenuating DC power bus noise, andas ripple filters in dc to dc powerconversion circuits. As couplingcapacitors in audio circuits, they yield

High Capacitance 16 Vdc Film Chips0.1µF to 1.0µF in 0805 to 1210 Case Size

Surface Mount Film Capacitors

• Smallest Film Chips• Non-Polarized• No Piezo Electric Effects• Low E.S.R

Type FCA acrylic film chips are non-inductive stackedmetallized film capacitors which feature large capacitancevalues in standard surface mount case sizes.

distort ion free sound and bet terhigh frequency filtering. The capacitoris constructed of stacked layers ofmetallized acrylic resin film, and thecapacitor surface is sealed in a protectivelayer of acrylic resin. The terminals aresolder plated copper alloy.

Highlights

dV/dt(V/µs) 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz

0.10 FCA0805C104M-J2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65

0.15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.45 0.54 0.62 0.68

0.22 FCA1206C224M-H1 13 0.25 0.33 0.45 0.55 0.66 0.76 0.84

0.33 FCA1206C334M-H2 10 0.35 0.45 0.61 0.74 0.84 0.94 1.00

0.47 FCA1206C474M-H3 7 0.39 0.52 0.71 0.86 1.00 1.10 1.17

0.68 FCA1206C684M-H3 5 0.48 0.625 0.85 1.04 1.19 1.31 1.34

1.0 FCA1210C105M-G2 3 0.60 0.78 1.05 1.25 1.38 1.46 1.46

Capacitance (µF)

CDE Part NumberMaximum Current (Arms)

» Filtering » Decoupling

» Noise Attenuation

» Distortion Free Audio


Chip and SMT

Capacitors

CORNELLDUBILIER


Type FCASurface Mount Film Chip Capacitors

Life Test;Apply 125% of the rated DC working voltage at 85°Cfor 1000 hours, and then stabilize them to +20°C.Capacitors will meet the following limits: C = +7%/-20% of the initial measured value DF 1.65% (at 1kHz) I.R. > 300MΩ (C ≤

0.33µF)

I.R. > 100MΩ •µ

F(C >

0.33µF)

Moisture Resistance;After 500 hours with rated voltage applied at +40°C and90 to 95% R.H., the capacitor will meet the followinglimits: ∆ C = +20/-3% of the initial measured value DF ≤ 2.25% (at 1kHz) I.R. > 100MΩ (C ≤ 0.33µF) I.R. > 30MΩ •µ F(C >

0.33µF)

Dielectric Strength: Capacitor will withstand 130% of the rated voltage for 1 minute.

Shelf Life Test;Shelf life accelerated test: after 500 hours at 105°C,capacitors will meet the following limits after stabiliza-tion at 20°C:

∆C = ±10% of the initial measured value DF & DCL ≤ the initial specified value

Resistance to Soldering Heat;The capacitors can withstand being heated in an ovenat 235°C for 200 seconds.

Operating Temperature Range;-40°C to +85°C

Capacitance Tolerance;±20% at 1 kHz and +20°C

Dissipation Factor (DF);It's no more than 0.015 at 1 kHz and +20°C.

Dielectric Strength;175% of rated voltage for 5 seconds

Insulation Resistance (I.R.);After 1 minute @ 10Vdc (+20°C), I.R. > 1000MΩ (C ≤

0.33µF)

I.R. > 300MΩ •µF (C > 0.33µF)

Ac Voltage Rating:12 Volts rms

Specifications

J2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45

H1 1206 0.126 0.063 0.032 0.026 3.2 1.6 0.8 0.65

H2 1206 0.126 0.063 0.039 0.026 3.2 1.6 1.0 0.65

H3 1206 0.126 0.063 0.055 0.026 3.2 1.6 1.4 0.65

G2 1210 0.126 0.098 0.055 0.026 3.2 2.5 1.4 0.65

H (±.008in.)

S (±.012in.)

Part Number Suffix

Case Code

L (±.008in.)

MetricEnglish

L (±0.2mm)

W (±0.2mm)

H (±0.2mm)

S (±0.3mm)

W (±.008in.)

Outline Dimensions

H

W

S

S

L

Outline Drawing




CORNELLDUBILIER


Chip

and

SM

TCa

paci

tors

Dissipation Factor

0

1

2

-60 -40 -20 0 20 40 60 80 100

Temperature (°C)

D.F

. (%

)

(Typical)

Capacitance Change

-10

-8

-6

-4

-2

0

2

4

6

8

10

-60 -40 -20 0 20 40 60 80 100

Temperature (°C)

Cap

acit

ance

Ch

ang

e (%

)

(Typical)

Dissipation Factor

0

1

2

3

4

5

6

7

8

9

10

1 10 100 1,000 10,000

Frequency (kHz)

D.F

. (%

)

0.1uF

.33uF

1.0uF

Capacitance Change

-10

-8

-6

-4

-2

0

2

4

6

8

10

1 10 100 1,000 10,000

Frequency (kHz)

Cap

acit

ance

Ch

ang

e (%

)

0.1uF

0.33uF

1.0uF

Impedance

0.01

0.10

1.00

10.00

100.00

1000.00

10000.00

1 10 100 1,000 10,000

Frequency (kHz)

Imp

edan

ce (

oh

ms)

0.1uF

.33uF

1.0uF

Insulation Resistance

1

10

100

1000

-60 -40 -20 0 20 40 60 80 100Temperature (°C)

I. R

. (M

egO

hm

s)

0.1uF0.33uF1.0uF

Type FCASurface Mount Film Chip Capacitors

Temperature Characteristics Frequency Characteristics


Chip and SMT

Capacitors

CORNELLDUBILIER


J2 8 178 3,000

H1, H2 8 178 3,000

H3 8 178 2,000

G2 8 178 2,000

Packaging CodeTape Width

(mm)Reel Diameter

(mm)Quantity per Reel

Packaging

a b c

0805 0.031 (0.8) 0.094 (2.4) 0.043 (1.1)

1206 0.071 (1.8) 0.142 (3.6) 0.055 (1.4)

1210 0.071 (1.8) 0.142 (3.6) 0.091 (2.3)

Case Size Code

Land Dimensions

Land Pattern

Surface Mount Film Chip CapacitorsType FCA

SolderingReflow method only, not to exceed two reflow processings.Halogen content of flux, solder paste and cleaner should beless than 0.1% for each.

Cleaning Solvent

Isopropyl alcohol

Cleaning MethodTemperature Time

Immersion 25°C <5min.Vapor <50°C <5min.Ultrasonic <50°C <5min.

Dry the circuit board completely after cleaning.

Soldering InformationRecommended Reflow Soldering Conditions

Ordering InformationFCA

Type

0805

Case SizeCode

VoltageC = 16 Vdc

C 104

CapacitanceCodepf code

104 = 100,000pf =.1µF

M

ToleranceM = 20%

- J2

PackagingCode

Aluminum

ElectrolyticCapacitors

AluminumElectrolyticCapacitors

Aluminum

ApplicationGuide

PhotoflashStrobe-FlashCapacitors

Aluminum

Axial LeadedCapacitors

Aluminum

Radial LeadedCapacitors

Aluminum

Snap-InCapacitors

Aluminum

Screw Term

inalCom

puter Grade

Aluminum


140 Technology PlaceLiberty, SC 29657(864) 843-2277, Fax (864) 843-3800http://www.cornell-dubilier.comE-mail: [email protected] 2.001

CORNELLDUBILIER


Selector Guide, Aluminum Electrolytic Capacitors

Max Max Load Case Case BestCap Volts Temp Life Sizes Sizes Bus

Type (µF) (Vdc) (°C) (h) (inches) (mm) Application Caps Highlights Page

Computergrade, Screw TerminalDCMC 2,700,000 6.3 to 550 85 °C 2000* 1.38x1.63 to 35x41 to UPS, Power Supply Highest µF, 2.005

3.5x8.63 89x218 input/output ThermalPak™

500C 2,600,000 6.3 to 550 95 °C 5000* 1.38x1.63 to 35x41 to UPS, Power Supply Long • Long Life, 2.0173.5x8.63 89x218 Life, input/output ThermalPak™

520C 39,000 200 to 500 85 °C 8000* 1.38x1.63 to 35x41 to Inverters, High Ripple, • Inverter-Grade 2.0283.5x8.63 89x218 Long Life ThermalPak™

550C 35,000 200 to 450 105 °C 10,000* 1.38x1.63 to 35x41 to Inverters, Higher Ripple, • Inverter-Grade 2.0343.5x8.63 89x218 Longer Life ThermalPak™

101C 1,500,000 7.5 to 250 105 °C 8,000* 1.38x1.63 to 35x41 to Wide Temp, Power Supply, –55 °C, Low ESR 2.0403x8.63 76x218 Supply, input/output ThermalPak™

125 190,000 5 to 40 125 °C 2000 1.38x1.63 to 35x41 to Ultra-High Temp, Power Hi Temperature 2.0491.38x5.63 35x143 Supply Output ThermalPak™

Snap-In380LQ 3,900 160 to 450 85 °C 2000 0.87x0.98 to 22x25 to Compact High Cap, 27% Smaller than 2.054

1.38x1.97 35x50 General Purpose 380LX

380L/LX 100,000 16 to 500 85 °C 3000 0.79x0.98 to 20x25 to High Capacitance, Widest Selection, 2.0581.58x3.15 40x80 General Purpose 45 case sizes

382L/LX 120,000 16 to 450 85 °C 3000 1.38x0.98 to 35x25 to 4 or 5 terminals, High µF, Rugged 2.0581.58x3.15 40x80 general purpose Reverseproof

381LQ 46,000 160 to 450 105 °C 2000 0.87x0.98 to 22x25 to Compact High-Ripple, • 24% Smaller than 2.0701.38x1.97 35x50 High Temperature 381LX

381L/LX 120,000 10 to 450 105 °C 3000 0.79x0.98 to 20x25 to High-Ripple, • 4 X Life of 380L/LX 2.0741.38x3.13 40x80 High Temperature

383L/LX 150,000 10 to 450 105 °C 3000 1.38x0.98 to 35x25 to 4 or 5 terminals, High • Hi Ripple, Rugged 2.0741.58x3.15 40x80 Ripple, High Temp Reverseproof

381LR 2,200 200 to 450 105 °C 3000 0.87x0.98 to 22x25 to Ultra-high Ripple Current • 25% Higher Ripple 2.0871.38x1.97 35x50 than 381L/LX

381EL 2,200 160 to 400 105 °C 7000 0.87x0.98 to 22x25 to Ultra-Long Life • 10 X Life of 380L/LX 2.0911.38x1.97 35x50

Radial Leaded

MLP 47,000 6.3 to 450 85°C 2000 1.5x1.75x0.5 to 38x44x13 to Flatpack, Ultra-Long Life • Hi Ripple, 2.0953x1.75x.5 51x44x13 Heatsinkable

MLS 47,000 5.0 to 250 125 °C 2000 1.5x1.75x0.5 to 38x44x13 to Flatpack, Ultra-Long Life • Hi Ripple, 2.0993x1.75x.5 51x44x13 Heatsinkable

300/301 33,000 6.3 to 250 105 °C 4000 0.5x0.78 to 12.5x20 to Long Life, Switching Low ESR, Welded 2.1031.0x3.63 25x92 Power Grade Leads, Low Z@100

kHz

* Full load ripple life test mounted horizontally per EIA IS-749

140 Technology PlaceLiberty, SC 29657



CORNELLDUBILIER


Alum

inum

Elec

troly

ticCa

paci

tors

Selector Guide, Aluminum Electrolytic Capacitors

*Full load ripple life test mounted horizontally per EIA IS–749Cornell Dubilier is a QPL Supplier for MIL-C-39018 capacitors and is ISO 9000 registered

Max Max Load Case Case BestCap Volts Temp Life Sizes Sizes Bus

Type (µF) (Vdc) (°C) (h) (inches) (mm) Application Caps Highlights Page

Radial Leaded (continued)330/331 33,000 6.3 to 250 105 °C 0.77x3.65 to 19.5x93 to 30-year Power Supplies High Ripple, Ultra 2.111

1x3.65 25x92 Long Life

325/326 46,000 6.3 to 35 125 °C 4000 0.77x1.15 to 19.5x93 to High Ripple, Automotive 2.1161x3.66 25x93

350 15,000 6.3 to 100 105 °C 4000 0.75x1.125 to 19.5x93 to Low Impedance, Low ESL 2.1201x3.625 25x92 High Frequency

361R 18,000 6.3 to 450 105 °C 1000 0.5x0.78 to 12.5x20 to Miniature, Industrial High Value 2.1240.87x1.6 22x40 Grade

4CMC 560,000 6.3 to 450 85 °C 2000* 1.375x1.75 to 35x44 to High Capacitance, Highest Cap, 2.1292x5.75 51x146 Computer Grade 3 Leads

400C 530,000 6.3 to 450 95 °C 3000* 1.375x1.75 to 35x44 to Long Life, • High Cap, Long Life, 2.1352x5.75 51x146 Computer Grade 3-Leads

401C 490,000 6.3 to 250 105 °C 2500* 1.375x1.75 t 35x44 to Low ESR, Wide High Ripple, Wide 2.1462x5.75 51x146 Temperature Grade Temp, 3 Leads

420C 27,000 100 to 500 85 °C 4000* 1.375x1.75 to 35x44 to Inverters, High Ripple, • High Ripple, 3 Leads 2.1402x5.75 51x146 Long Life

450C 24,000 100 to 500 105 °C 5000* 1.375x1.75 to 35x44 to Inverters, Higher Ripple, • Highest Ripple, 2.1432x5.75 51x146 Longer Life 3 Leads

Axial Leaded

NLW 600 6.3 to 150 105 °C 1000 .28x.57 to 7x14 to Miniature Computer High Temperature 2.153.40x1.57 10x40 Grade

556 12,000 6.3 to 450 105 °C 4000 .25x.51 to 6.3x13 to Computer Grade Long life, twice 2.155.71x1.57 18x40 ripple capability

066 68,000 6.3 to 450 105 °C 1000 .635x.760 to 16.13x19.30 to Standard, Low DCL Low DCL 2.1601.250x3.750 31.75x95.25

WBR 10,000 16 to 500 85 °C 2000 .28x.57 to 7x14 to General Purpose High Capacitance, 2.1661.42x3.72 36x94 High Voltage

557/UHL 1,000 5 to 250 125 °C 2000 .291x.385 to 7.39x9.78 to Wide Temperature Range High Temperature, 2.1681.062x1.250 26.97x31.75 Long life

057 33,000 6.3 to 250 105 °C 2000 .510x1.25 to 13x32 to High Ripple, Military High Ripple, 2.172.760x3.75 19x95 Grade High Vibration

Photoflash and Strobe7P 2,700 330 & 360 55 °C 100,000 1.18x.98 to 30x25 to Photoflash, Hi-Energy 100,000 Flashes, 2.176

flashes 1.57x3.15 40x80 Snap-in

PF 2,100 500 55 °C 100,000 1.375x1.68 to 35x43 to Photoflash, Long Life 100,000 Flashes, 2.178flashes 2x5.68 51x144 Screw Terminals

10 Exceptional lifeST 300 360 to 450 55 °C million 0.98x1.38 to 25x35 to Strobe-Flash,Long Life capability, 30 million 2.180

flashes 0.98x1.97 25x50 discharges

Aluminum Electrolytic Capacitor Application Guide 2.183


CORNELLDUBILIER


Aluminum


Aluminum Electrolytic Capacitors

Your Source for Capacitor Solutions. Our new rallying cry is“Your Source for Capacitor Solutions.” Cornell Dubilier is anold-line capacitor company reborn with a vision. All of our stan-dard products are capacitors. But most are not popcorn, me-toocapacitors. Most have special capabilities that we can mold to

solutions for your application needs. The capacitors in this bookare capability statements. Think of them as starting places. Letus know your special requirements and we’ll tweak the capacitorsto meet your needs. To see the extra capability take a look atwhat’s here:

125 °C. Type 325 is the ultra-wide-temperature, low-ESRcapacitor for switching power-supply outputs and automotiveapplications. The 125 °C capability and exceptionally lowESRs enable high ripple-current capability. With series induc-tance of 12 to 16 nH and ripple currents to 27 amps one ofthese capacitors can save by replacing eight to ten of the 12.5mm diameter capacitors routinely at the output of switchingpower supplies.

New snap-in capacitors are more compact or offer muchhigher ripple current capability. New Type 381LQ is onaverage 23% smaller and more than 5 mm shorter using a newcan-closure method that permits installing capacitor elementsinto smaller cans. This enables you to shrink equipment sizeand retain the original performance. The new Type 381LR canhandle an extra 25% ripple current or more. The new, extreme-ly low ESR values really deliver in high ripple current applica-tions like motor drives where you can save by using fewercapacitors.

And discover for yourself why the Application Guide,Aluminum Electrolytic Capacitors at the end of the alu-minum electrolytic capacitor section got this unsolicited com-ment from one of our customers: “I just finished reading the‘guide,’ and I had to write you guys a note to say thanks, andalso a hearty ‘well done’ to whoever wrote it! I’ve been design-ing and modifying tube and solid-state circuits for quite a fewyears now, and have never seen a lot of the data in the‘guide’—you can find it pretty easily for tantalums, but not forAL’s. It answered just about every question I’ve ever had onAL’s-and never knew where to find the answers. Not only that,but the quality of the writing is exceptional, really super read-able!”

The New, Expanded Temperature-Lifetime Calculatorsallow you to save on bus capacitors by empowering yourselfto choose the capacitors you need for your operating condi-tions and to meet your minimum lifetime requirements. Nowyou can know precisely how long your bus capacitors will lastin a welder, power supply, motor drive, UPS or other inverterapplication. Three new calculators permit you to input youroperating conditions and see the capacitor’s hot spot tempera-ture ± 2 °C and expected lifetime in 100 h increments. Basedon thousands of measurements of the thermal properties ofcapacitor materials and extensive modeling of ESR versustemperature and frequency, these new calculators take awaymuch of the uncertainty in predicting capacitor expected life,especially in high ripple current applications. These three,easy-to-use calculators are at the Cornell-Dubilier Website,www.cornell-dubilier.com. One is for computergrade capaci-tors, one for snap-in capacitors and a new one for PC-mountcomputergrade capacitors.

New Thermal Pak™ PC-Mount capacitors are the better-value replacement for large snap-in capacitors. Now withextended cathode foil to pull heat from the capacitor elementto the can, these new PC-mount computergrades are worth alook. You not only save the labor of installing and tighteningtwo terminal screws and up to 4 mounting-bracket screws foreach capacitor, you also gain more capacitance and ripple-cur-rent capability per case size. Look for the types beginningwith the number 4, 4CMC, 400C, 420C, 450C and 401C.

New Type 325 extends large radial-leaded capacitors to125 °C operation. As a complement to the ultra-long-lifeType 330 capacitor, the new Type 325 capacitor allows contin-uous operation at slow, ham-roasting temperatures up to

Thermal Pak™ Construction BenefitsCompression Design—Better heat transfer because of continuousheat conduction path from core to case.

Better Shock & Vibration Performance—Capacitor core is firmlyanchored and protected from rotational movement.

Positive Orientation of Capacitor Core in Case—Capacitor core is always upright, never tilted, and centrally locatedfor even heat transfer.

More Reliable Safety Vent—The vent cannot become cloggedwith thermoplastic potting compound often used by other manu-facturers.

Longer Life—Electrolytic capacitors gradually build up internalpressure during operation. Absence of thermoplastic pottingcompound allows more free space for gas thus lowering the rateof internal pressure rise.

Lighter Weight—Elimination of heavy thermoplasticpotting compound reduces weight.

MATCHING RISERMOLDED INTO TOP

ALUMINUM EXTENDEDFOR POSITIVEHEAT CONDUCTIONPATH (EXTENDEDCATHODE DESIGN)

POSITIONING RISERINSIDE CAN BOTTOM

Alum

inum

Elec

troly

ticCa

paci

tors

CORNELLDUBILIER


Aluminum Electrolytic Capacitors




Expected Lifetime/Operating-Temperature Calculator on Web Site

The figure above shows the new temperature-lifetime calculator forcomputergrade, screw terminal capacitors. In the instance here a TypeDCMC, 6800 µF 450 V capacitor is operating in 45 °C still air with 400V and ripple currents of 10 amps at 120 Hz and 20 amps at 20 kHz. Thecapacitor is pressed against a heatsink delivering a 2 °C/W thermal resis-tance to ambient air. These operating conditions predict an expected lifeof 82,700 hours with an average internal hot spot temperature of 59 °C.Without the heatsink the temperature would jump to 67 °C and theexpected life drop to 47,700 hours. That’s a drop from nearly 10 yearsto just more than five years. To see this yourself, try it out at www.cor-nell-dubilier.com/newframe12.htm

CDE Computergrade Life / Temperature Calculator

Initial PowerDissipation (W)

Initial CoreTemp (C)

Avg Core Tempover Life (C)

Expected Life(hours)

CALCULATE ?


Type DCMC, 85 C High Capacitance, Computer Grade, Aluminum

CORNELLDUBILIER


Aluminum

Screw Term

inalCom

puter Grade

SpecificationsOperating Temperature: 40 °C to +85 °C

Rated Voltage: 6.3 to 550 VdcCapacitance: 110 µF to 2.7 F

Capacitance Tolerance: 10 +75% up to 100 Vdc, 10 + 50% 160 Vdc & upLeakage Current: 6 CV µA (6mA maximum) at 5 minutesCold Impedance: 20 ˚C multiple of 25 ˚C Z 20 for 6.3–10V, 8 for 16–50V,

4 for 63–100V, 3 for 150V and up.Ripple Current Multipliers: Ambient Temperature

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz& up

1 3/8” & 1 3/4” Diameters:6.3 to 160 V 0.92 0.94 1.00 1.05 1.10 1.10 1.12200 to 350 V 0.80 0.85 1.00 1.17 1.30 1.30 1.32400 to 550 V 0.78 0.83 1.00 1.20 1.35 1.36 1.40

2” & 2 1/2” Diameters:6.3 to 160 V 0.93 0.95 1.00 1.04 1.07 1.11 1.12200 to 350 V 0.81 0.87 1.00 1.13 1.20 1.24 1.26400 to 550 V 0.79 0.83 1.00 1.17 1.26 1.30 1.34

3” & 3 1/2” Diameters:6.3 to 160 V 0.95 0.96 1.00 1.02 1.04 1.05 1.05200 to 350 V 0.85 0.88 1.00 1.08 1.12 1.14 1.17400 to 550 V 0.82 0.84 1.00 1.13 1.20 1.24 1.27

EIA Ripple Life: 2,000 h at full load @ +85 °C per EIA IS-749 Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h @ +85 °C, capacitance, ESR and DCL, initial requirements.Vibration: 10 to 55 Hz, 0.06” and 10g max, 1.5 h ea of 2 axis

45 °C 55 °C 65 °C 75 °C 85 °C2.24 2.00 1.73 1.41 1.00

40 °C to +85 °C, High CapacitanceBest Capacitance Value Screw Terminal TypeType DCMC capacitors are the choice for high-capacitance,power supply filters and energy storage applications suchas welding equipment, UPS systems and computer hold-uppower where high capacitance, low ESR and the ability tohandle large ripple currents are the hallmarks. The extendedcathode foil of the DCMC assures cool operation with heatflow from the capacitor element to the can.

Highlights Highest capacitance value Right for Power Supply and UPS systems Thermal-Pak™ extended cathode construction

ripple

500Cp 2.017

520Cp 2.028

life

cold101Cp 2.040

MORE




Type DCMC, 85 °C High Capacitance, Computer Grade, Aluminum

CORNELLDUBILIER


Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de

Case Dimensions

Uninsulated Case DimensionsFor insulated case, add 0.024” (0.610 mm) to “D” and 0.030” (0.762 mm) to height.

Outline Drawings

Case Stud P0.039”Diam. Thread (1.0 mm)1.375 M8 0.470” (12.0)2.000 M12 0.630” (16.0)2.500 M12 0.630” (16.0)3.000 M12 0.630” (16.0)3.500 M12 0.630” (16.0)

Post Diameter H max For CaseTerminal Style Code inches (mm) inches (mm) Thread Diameters

Low Post A 0.314” (8.0) 0.094” (2.39) 10-32 13⁄8 to 3High Post B 0.314” (8.0) 0.281” (7.14) 10-32 13⁄8 to 3High Current, Low Post D 0.687” (17.5) 0.125” (3.18) 1⁄4-28 21⁄2 to 31⁄2High Current, High Post E 0.687” (17.5) 0.281” (7.14) 1⁄4-28 21⁄2 to 31⁄2M5 Post F 0.512” (13.0) 0.230” (5.84) M5 21⁄2 & 3

NOTE: With the stud-mount feature,a thermally-conductive disk can beinserted in the bottom flush with theouter insulating sleeve. This reducesthe thermal resistance through the canbottom by 0.3 °C/W. Order Can Style P.

Diam. (D) Length (L) Terminals (S)Case .031 .78 .062 1.57 0.015 .38 Typical WeightCode Inches mm Inches mm Inches mm oz gAK 1.375 34.93 1.625 41.28 0.500 12.70 1.9 54AA 1.375 34.93 2.125 53.98 0.500 12.70 2.0 57AH 1.375 34.93 2.625 66.68 0.500 12.70 2.7 77AB 1.375 34.93 3.125 79.38 0.500 12.70 3.3 94AJ 1.375 34.93 3.625 92.08 0.500 12.70 3.8 108AC 1.375 34.93 4.125 104.78 0.500 12.70 4.4 125AD 1.375 34.93 4.625 117.48 0.500 12.70 5.1 145AE 1.375 34.93 5.125 130.18 0.500 12.70 6.8 193AF 1.375 34.93 5.625 142.88 0.500 12.70 8.1 230EA 1.750 44.45 2.125 53.98 0.750 19.05 2.7 76EH 1.750 44.45 2.625 66.68 0.750 19.05 3.8 108EB 1.750 44.45 3.125 79.38 0.750 19.05 5.1 145EJ 1.750 44.45 3.625 92.08 0.750 19.05 6.8 193EC 1.750 44.45 4.125 104.78 0.750 19.05 8.1 230ED 1.750 44.45 4.625 117.48 0.750 19.05 9.0 255EE 1.750 44.45 5.125 130.18 0.750 19.05 9.5 269EF 1.750 44.45 5.625 142.88 0.750 19.05 10.5 298BA 2.000 50.80 2.125 53.98 0.875 22.23 5.4 153BH 2.000 50.80 2.625 66.68 0.875 22.23 6.1 173BB 2.000 50.80 3.125 79.38 0.875 22.23 6.8 193BJ 2.000 50.80 3.625 92.08 0.875 22.23 8.2 232BC 2.000 50.80 4.125 104.78 0.875 22.23 9.5 269BD 2.000 50.80 4.625 117.48 0.875 22.23 10.3 292BE 2.000 50.80 5.125 130.18 0.875 22.23 10.7 303BF 2.000 50.80 5.625 142.88 0.875 22.23 13.0 369CH 2.500 63.50 2.625 66.68 1.125 28.58 9.2 261CB 2.500 63.50 3.125 79.38 1.125 28.58 10.4 295CJ 2.500 63.50 3.625 92.08 1.125 28.58 12.7 361CC 2.500 63.50 4.125 104.78 1.125 28.58 15.0 425CD 2.500 63.50 4.625 117.48 1.125 28.58 17.2 488CE 2.500 63.50 5.125 130.18 1.125 28.58 19.3 547CF 2.500 63.50 5.625 142.88 1.125 28.58 21.4 607DJ 3.000 76.20 3.625 92.08 1.250 31.75 20.0 567DC 3.000 76.20 4.125 104.78 1.250 31.75 22.2 629DD 3.000 76.20 4.625 117.48 1.250 31.75 25.5 723DE 3.000 76.20 5.125 130.18 1.250 31.75 30.0 850DF 3.000 76.20 5.625 142.88 1.250 31.75 31.9 904DP 3.000 76.20 5.875 149.23 1.250 31.75 32.8 931DN 3.000 76.20 7.625 193.68 1.250 31.75 39.5 1119DG 3.000 76.20 8.625 219.08 1.250 31.75 43.3 1227FC 3.500 88.90 4.125 104.78 1.250 31.75 30.0 850FD 3.500 88.90 4.625 117.48 1.250 31.75 34.4 976FE 3.500 88.90 5.125 130.18 1.250 31.75 40.5 1148FF 3.500 88.90 5.625 142.88 1.250 31.75 43.1 1221FP 3.500 88.90 5.875 149.23 1.250 31.75 44.3 1257FN 3.500 88.90 7.625 193.68 1.250 31.75 53.3 1512FG 3.500 88.90 8.625 219.03 1.250 31.75 58.5 1658

Stud Dimensions

Terminal Dimensions

+0-.062

(+0-1.57)

Note: Only high post and M5post terminals are available at550 Vdc as they meet therequired creepage distance.

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER




Part Numbering SystemDCMC 492 U 063 AA 2 B S

Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style100 = 10 F M = 20% 6R3 = 6.3 Vdc 0 = None A = Low Post Blank =101 = 100 F U = 10%+75% 063 = 63 Vdc 1 = Polyester B = High Post Standard492 = 4900 F T = 10%+50% 100 = 100 Vdc 2 = PVC D = High Current, Can433 = 43,000 F Low Post S = Stud

E = High Current, BottomHigh Post P = Stud with

F = M5 Post thermalpad

Temperature Characteristics - 4600 F 100 Vdc

Temperature Characteristics - 100,000 F 10 Vdc Temperature Characteristics - 29,000 F 50 Vdc

Standard insulation is 0.008-in PVC sleeve with 0.01-in polypropylene end disk.

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER




Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Type DCMC, 85 °C High Capacitance, Computer Grade, AluminumTypical Performance Curves

Ratings

6.3 Vdc (8 Vdc Surge)28000 DCMC283U6R3AK2B 46.9 4.1 1 3/8 X 1 5/857000 DCMC573U6R3AA2B 26.5 6.1 1 3/8 X 2 1/868000 DCMC683U6R3AH2B 18.8 7.8 1 3/8 X 2 5/891000 DCMC913U6R3AB2B 14.7 9.4 1 3/8 X 3 1/8

100000 DCMC104U6R3EA2B 18.8 8.8 1 3/4 X 2 1/8110000 DCMC114U6R3AJ2B 12.8 11.2 1 3/8 X 3 5/8120000 DCMC124U6R3EH2B 14.3 11.0 1 3/4 X 2 5/8130000 DCMC134U6R3AC2B 11.0 13.0 1 3/8 X 4 1/8130000 DCMC134U6R3BA2B 14.2 11.9 2 X 2 1/8150000 DCMC154U6R3BH2B 9.9 11.6 2 X 2 5/8160000 DCMC164U6R3AD2B 9.8 12.5 1 3/8 X 4 5/8160000 DCMC164U6R3EB2B 11.0 12.6 1 3/4 X 3 1/8180000 DCMC184U6R3AE2B 8.9 14.7 1 3/8 X 5 1/8200000 DCMC204U6R3AF2B 8.3 16.0 1 3/8 X 5 5/8200000 DCMC204U6R3EJ2B 9.1 15.9 1 3/4 X 3 5/8210000 DCMC214U6R3BB2B 7.8 17.8 2 X 3 1/8240000 DCMC244U6R3EC2B 7.9 18.3 1 3/4 X 4 1/8260000 DCMC264U6R3BJ2B 6.5 15.6 2 X 3 5/8260000 DCMC264U6R3CH2B 6.9 16.2 2 1/2 X 2 5/8280000 DCMC284U6R3ED2B 7.0 17.1 1 3/4 X 4 5/8310000 DCMC314U6R3BC2B 5.6 20.2 2 X 4 1/8320000 DCMC324U6R3EE2B 6.4 19.7 1 3/4 X 5 1/8350000 DCMC354U6R3CB2B 5.3 22.6 2 1/2 X 3 1/8360000 DCMC364U6R3EF2B 6.0 22.0 1 3/4 X 5 5/8370000 DCMC374U6R3BD2B 5.0 24.9 2 X 4 5/8420000 DCMC424U6R3BE2B 4.5 23.0 2 X 5 1/8

440000 DCMC444U6R3CJ2B 4.3 25.0 2 1/2 X 3 5/8470000 DCMC474U6R3BF2B 4.2 26.7 2 X 5 5/8520000 DCMC524U6R3DB2B 4.1 28.3 3 X 3 1/8530000 DCMC534U6R3CC2D 3.8 30.4 2 1/2 X 4 1/8610000 DCMC614U6R3CD2D 3.4 33.4 2 1/2 X 4 5/8650000 DCMC654U6R3DJ2D 3.3 34.6 3 X 3 5/8700000 DCMC704U6R3CE2D 3.1 33.3 2 1/2 X 5 1/8780000 DCMC784U6R3DC2D 2.9 35.7 3 X 4 1/8790000 DCMC794U6R3CF2D 2.8 37.9 2 1/2 X 5 5/8910000 DCMC914U6R3DD2D 2.6 41.0 3 X 4 5/8

1000000 DCMC105U6R3DE2D 2.4 44.4 3 X 5 1/81100000 DCMC115U6R3DF2D 2.4 45.0 3 X 5 5/81100000 DCMC115U6R3FC2D 3.0 41.4 3 1/2 X 4 1/81200000 DCMC125U6R3DP2D 2.4 51.5 3 X 5 7/81200000 DCMC125U6R3FD2D 2.6 43.2 3 1/2 X 4 5/81400000 DCMC145U6R3FE2D 2.4 47.1 3 1/2 X 5 1/81600000 DCMC165U6R3DN2D 2.4 49.3 3 X 7 5/81600000 DCMC165U6R3FF2D 2.4 47.9 3 1/2 X 5 5/81700000 DCMC175U6R3FP2D 2.4 49.4 3 1/2 X 5 7/81900000 DCMC195U6R3DG2D 2.4 49.9 3 X 8 5/82300000 DCMC235U6R3FN2D 2.4 54.1 3 1/2 X 7 5/82700000 DCMC275U6R3FG2D 2.4 56.5 3 1/2 X 8 5/8

10 Vdc (12 Vdc Surge)24000 DCMC243U010AK2B 46.9 4.1 1 3/8 X 1 5/844000 DCMC443U010AA2B 26.5 6.1 1 3/8 X 2 1/857000 DCMC573U010AH2B 20.1 7.5 1 3/8 X 2 5/876000 DCMC763U010AB2B 15.5 9.2 1 3/8 X 3 1/8

ESR Max. Ripple Max.@ 25 °C @ 85 °C Nominal Size

Cap. Catalog 120 Hz 120 Hz D x LF Part Number (mΩ) (A) (inches)



Impedance vs Frequency @ +25 C

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Ratings


79000 DCMC793U010EA2B 18.8 8.8 1 3/4 X 2 1/896000 DCMC963U010AJ2B 12.8 11.2 1 3/8 X 3 5/8

100000 DCMC104U010EH2B 14.3 11.0 1 3/4 X 2 5/8100000 DCMC104U010BA2B 17.6 10.3 2 X 2 1/8110000 DCMC114U010AC2B 11.0 13.5 1 3/8 X 4 1/8130000 DCMC134U010AD2B 9.8 11.6 1 3/8 X 4 5/8140000 DCMC144U010EB2B 11.0 11.8 1 3/4 X 3 1/8140000 DCMC144U010BH2B 13.4 11.4 2 X 2 5/8150000 DCMC154U010AE2B 8.9 14.7 1 3/8 X 5 1/8170000 DCMC174U010AF2B 8.3 16.0 1 3/8 X 5 5/8170000 DCMC174U010EJ2B 9.1 15.9 1 3/4 X 3 5/8180000 DCMC184U010BB2B 10.5 15.4 2 X 3 1/8210000 DCMC214U010EC2B 7.9 18.3 1 3/4 X 4 1/8220000 DCMC224U010BJ2B 8.7 13.5 2 X 3 5/8220000 DCMC224U010CH2B 8.8 14.4 2 1/2 X 2 5/8240000 DCMC244U010ED2B 7.0 17.1 1 3/4 X 4 5/8270000 DCMC274U010BC2B 7.5 17.4 2 X 4 1/8280000 DCMC284U010EE2B 6.4 19.7 1 3/4 X 5 1/8290000 DCMC294U010CB2B 6.7 20.0 2 1/2 X 3 1/8310000 DCMC314U010EF2B 6.0 22.0 1 3/4 X 5 5/8310000 DCMC314U010BD2B 6.7 21.5 2 X 4 5/8350000 DCMC354U010BE2B 6.1 19.8 2 X 5 1/8370000 DCMC374U010CJ2B 5.5 22.1 2 1/2 X 3 5/8400000 DCMC404U010BF2B 5.7 22.9 2 X 5 5/8430000 DCMC434U010DB2B 4.1 28.3 3 X 3 1/8440000 DCMC444U010CC2B 4.8 26.9 2 1/2 X 4 1/8510000 DCMC514U010CD2B 4.3 29.5 2 1/2 X 4 5/8540000 DCMC544U010DJ2D 3.3 34.6 3 X 3 5/8590000 DCMC594U010CE2B 3.9 29.5 2 1/2 X 5 1/8640000 DCMC644U010DC2D 2.9 35.7 3 X 4 1/8660000 DCMC664U010CF2D 3.6 33.5 2 1/2 X 5 5/8750000 DCMC754U010DD2D 2.6 41.0 3 X 4 5/8860000 DCMC864U010DE2D 2.4 44.4 3 X 5 1/8900000 DCMC904U010FC2D 2.9 41.6 3 1/2 X 4 1/8940000 DCMC944U010DF2D 2.3 47.1 3 X 5 5/8

1000000 DCMC105U010DP2D 2.3 52.8 3 X 5 7/81000000 DCMC105U010FD2D 2.8 42.0 3 1/2 X 4 5/81200000 DCMC125U010FE2D 2.5 46.3 3 1/2 X 5 1/81300000 DCMC135U010FF2D 2.2 50.3 3 1/2 X 5 5/81400000 DCMC145U010DN2D 2.1 52.7 3 X 7 5/81400000 DCMC145U010FP2D 2.1 52.7 3 1/2 X 5 7/81600000 DCMC165U010DG2D 2.1 54.2 3 X 8 5/81900000 DCMC195U010FN2D 1.8 64.3 3 1/2 X 7 5/82200000 DCMC225U010FG2D 1.5 70.6 3 1/2 X 8 5/8

16 Vdc (20 Vdc Surge)21000 DCMC213U016AK2B 46.9 4.1 1 3/8 X 1 5/835000 DCMC353U016AA2B 26.5 6.1 1 3/8 X 2 1/849000 DCMC493U016AH2B 20.1 7.5 1 3/8 X 2 5/857000 DCMC573U016EA2B 18.8 8.3 1 3/4 X 2 1/862000 DCMC623U016AB2B 15.5 9.7 1 3/8 X 3 1/873000 DCMC733U016BA2B 17.6 9.5 2 X 2 1/876000 DCMC763U016AJ2B 12.8 11.7 1 3/8 X 3 5/877000 DCMC773U016EH2B 15.3 11.1 1 3/4 X 2 5/890000 DCMC903U016AC2B 11.0 13.5 1 3/8 X 4 1/899000 DCMC993U016AD2B 9.8 11.6 1 3/8 X 4 5/8

100000 DCMC104U016EB2B 12.5 11.1 1 3/4 X 3 1/8110000 DCMC114U016AE2B 8.9 14.0 1 3/8 X 5 1/8110000 DCMC114U016BH2B 13.4 12.0 2 X 2 5/8130000 DCMC134U016AF2B 8.3 16.0 1 3/8 X 5 5/8130000 DCMC134U016EJ2B 10.9 14.6 1 3/4 X 3 5/8

130000 DCMC134U016BB2B 10.5 15.4 2 X 3 1/8150000 DCMC154U016EC2B 9.7 16.5 1 3/4 X 4 1/8160000 DCMC164U016BJ2B 8.7 13.5 2 X 3 5/8160000 DCMC164U016CH2B 8.8 14.4 2 1/2 X 2 5/8180000 DCMC184U016ED2B 8.8 15.3 1 3/4 X 4 5/8200000 DCMC204U016BC2B 7.5 17.4 2 X 4 1/8210000 DCMC214U016EE2B 8.2 17.5 1 3/4 X 5 1/8220000 DCMC224U016CB2B 6.7 20.0 2 1/2 X 3 1/8230000 DCMC234U016EF2B 7.8 19.3 1 3/4 X 5 5/8230000 DCMC234U016BD2B 6.7 21.5 2 X 4 5/8260000 DCMC264U016BE2B 6.1 19.8 2 X 5 1/8270000 DCMC274U016CJ2B 5.5 22.1 2 1/2 X 3 5/8290000 DCMC294U016BF2B 5.7 22.9 2 X 5 5/8320000 DCMC324U016CC2B 5.0 25.6 2 1/2 X 4 1/8320000 DCMC324U016DB2B 4.2 28.9 3 X 3 1/8380000 DCMC384U016CD2B 4.6 28.5 2 1/2 X 4 5/8400000 DCMC404U016DJ2D 3.6 33.3 3 X 3 5/8430000 DCMC434U016CE2B 4.4 27.9 2 1/2 X 5 1/8480000 DCMC484U016DC2D 3.3 33.8 3 X 4 1/8490000 DCMC494U016CF2D 4.2 31.2 2 1/2 X 5 5/8560000 DCMC564U016DD2D 3.1 37.5 3 X 4 5/8650000 DCMC654U016DE2D 2.8 40.5 3 X 5 1/8700000 DCMC704U016FC2D 2.9 41.6 3 1/2 X 4 1/8710000 DCMC714U016DF2D 2.8 42.8 3 X 5 5/8750000 DCMC754U016DP2D 2.8 48.3 3 X 5 7/8810000 DCMC814U016FD2D 2.8 42.1 3 1/2 X 4 5/8930000 DCMC934U016FE2D 2.5 46.2 3 1/2 X 5 1/8

1000000 DCMC105U016FF2D 2.4 48.3 3 1/2 X 5 5/81000000 DCMC105U016DN2D 2.6 47.5 3 X 7 5/81500000 DCMC155U016FN2D 2.3 55.4 3 1/2 X 7 5/81700000 DCMC175U016FG2D 2.3 58.2 3 1/2 X 8 5/8

25 Vdc (30 Vdc Surge)12000 DCMC123U025AK2B 37.1 4.7 1 3/8 X 1 5/820000 DCMC203U025AA2B 23.6 6.5 1 3/8 X 2 1/824000 DCMC243U025AH2B 20.1 7.5 1 3/8 X 2 5/833000 DCMC333U025AB2B 19.3 8.2 1 3/8 X 3 1/836000 DCMC363U025EA2B 21.8 8.2 1 3/4 X 2 1/842000 DCMC423U025AJ2B 19.4 9.1 1 3/8 X 3 5/843000 DCMC433U025EH2B 19.4 9.5 1 3/4 X 2 5/847000 DCMC473U025BA2B 21.8 9.3 2 X 2 1/852000 DCMC523U025AC2B 17.6 10.7 1 3/8 X 4 1/859000 DCMC593U025BH2B 16.5 9.0 2 X 2 5/860000 DCMC603U025EB2B 15.2 10.1 1 3/4 X 3 1/861000 DCMC613U025AD2B 16.4 10.3 1 3/8 X 4 5/871000 DCMC713U025AE2B 15.2 11.3 1 3/8 X 5 1/876000 DCMC763U025BB2B 12.2 13.2 2 X 3 1/877000 DCMC773U025EJ2B 12.8 13.4 1 3/4 X 3 5/880000 DCMC803U025AF2B 14.0 13.3 1 3/8 X 5 5/890000 DCMC903U025CH2B 9.5 16.7 2 1/2 X 2 5/894000 DCMC943U025EC2B 11.2 11.8 1 3/4 X 4 1/898000 DCMC983U025BJ2B 9.8 13.6 2 X 3 5/8

110000 DCMC114U025ED2B 10.2 14.2 1 3/4 X 4 5/8120000 DCMC124U025BC2B 8.3 16.6 2 X 4 1/8130000 DCMC134U025EE2B 9.6 16.1 1 3/4 X 5 1/8130000 DCMC134U025CB2B 7.6 18.9 2 1/2 X 3 1/8140000 DCMC144U025BD2B 7.3 19.9 2 X 4 5/8150000 DCMC154U025EF2B 9.1 18.4 1 3/4 X 5 5/8160000 DCMC164U025BE2B 6.6 19.1 2 X 5 1/8160000 DCMC164U025CJ2B 6.4 20.5 2 1/2 X 3 5/8190000 DCMC194U025BF2B 6.1 22.2 2 X 5 5/8





Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings


190000 DCMC194U025DB2B 5.0 25.5 3 X 3 1/8200000 DCMC204U025CC2B 5.8 24.6 2 1/2 X 4 1/8230000 DCMC234U025CD2B 5.2 26.8 2 1/2 X 4 5/8240000 DCMC244U025DJ2D 4.3 30.5 3 X 3 5/8270000 DCMC274U025CE2B 5.0 26.0 2 1/2 X 5 1/8300000 DCMC304U025DC2D 3.9 31.0 3 X 4 1/8310000 DCMC314U025CF2B 4.6 29.8 2 1/2 X 5 5/8350000 DCMC354U025DD2D 3.5 35.1 3 X 4 5/8400000 DCMC404U025DE2D 3.3 37.5 3 X 5 1/8430000 DCMC434U025FC2D 3.8 36.0 3 1/2 X 4 1/8460000 DCMC464U025DF2D 3.2 39.9 3 X 5 5/8490000 DCMC494U025DP2D 3.1 46.0 3 X 5 7/8500000 DCMC504U025FD2D 3.5 37.6 3 1/2 X 4 5/8580000 DCMC584U025FE2D 3.2 40.3 3 1/2 X 5 1/8660000 DCMC664U025FF2D 3.1 42.8 3 1/2 X 5 5/8670000 DCMC674U025DN2D 3.1 44.0 3 X 7 5/8700000 DCMC704U025FP2D 2.9 44.9 3 1/2 X 5 7/8780000 DCMC784U025DG2D 3.0 44.9 3 X 8 5/8950000 DCMC954U025FN2D 3.0 48.7 3 1/2 X 7 5/8

1100000 DCMC115U025FG2D 2.9 51.1 3 1/2 X 8 5/835 Vdc (40 Vdc Surge)

8200 DCMC822U035AK2B 41.7 4.4 1 3/8 X 1 5/814000 DCMC143U035AA2B 26.7 6.1 1 3/8 X 2 1/816000 DCMC163U035AH2B 23.2 7.0 1 3/8 X 2 5/823000 DCMC233U035AB2B 21.9 7.7 1 3/8 X 3 1/825000 DCMC253U035EA2B 22.3 8.1 1 3/4 X 2 1/830000 DCMC303U035AJ2B 21.6 8.6 1 3/8 X 3 5/830000 DCMC303U035EH2B 19.2 9.5 1 3/4 X 2 5/832000 DCMC323U035BA2B 24.5 8.8 2 X 2 1/836000 DCMC363U035AC2B 20.1 10.0 1 3/8 X 4 1/841000 DCMC413U035BH2B 20.1 8.1 2 X 2 5/842000 DCMC423U035EB2B 15.5 10.0 1 3/4 X 3 1/843000 DCMC433U035AD2B 17.8 9.9 1 3/8 X 4 5/849000 DCMC493U035AE2B 15.5 11.2 1 3/8 X 5 1/853000 DCMC533U035BB2B 15.9 11.6 2 X 3 1/854000 DCMC543U035EJ2B 13.2 13.2 1 3/4 X 3 5/856000 DCMC563U035AF2B 14.1 13.3 1 3/8 X 5 5/863000 DCMC633U035CH2B 14.8 13.4 2 1/2 X 2 5/866000 DCMC663U035EC2B 11.8 11.5 1 3/4 X 4 1/869000 DCMC693U035BJ2B 13.2 11.7 2 X 3 5/878000 DCMC783U035ED2B 10.6 13.9 1 3/4 X 4 5/884000 DCMC843U035BC2B 11.6 14.0 2 X 4 1/888000 DCMC883U035CB2B 11.5 14.7 2 1/2 X 3 1/890000 DCMC903U035EE2B 9.8 16.6 1 3/4 X 5 1/899000 DCMC993U035BD2B 10.5 16.6 2 X 4 5/8

100000 DCMC104U035EF2B 9.4 18.1 1 3/4 X 5 5/8110000 DCMC114U035BE2B 9.8 15.6 2 X 5 1/8110000 DCMC114U035CJ2B 9.4 16.9 2 1/2 X 3 5/8130000 DCMC134U035BF2B 9.4 17.9 2 X 5 5/8130000 DCMC134U035DB2B 6.9 21.8 3 X 3 1/8140000 DCMC144U035CC2B 8.2 20.6 2 1/2 X 4 1/8160000 DCMC164U035CD2B 7.4 22.5 2 1/2 X 4 5/8170000 DCMC174U035DJ2B 5.7 26.4 3 X 3 5/8190000 DCMC194U035CE2B 6.8 22.3 2 1/2 X 5 1/8210000 DCMC214U035CF2B 6.1 24.7 2 1/2 X 5 5/8210000 DCMC214U035DC2B 5.2 28.0 3 X 4 1/8240000 DCMC244U035DD2D 4.7 30.5 3 X 4 5/8280000 DCMC284U035DE2D 4.4 32.6 3 X 5 1/8300000 DCMC304U035FC2D 4.9 31.7 3 1/2 X 4 1/8320000 DCMC324U035DF2D 4.0 35.5 3 X 5 5/8

340000 DCMC344U035DP2D 3.9 40.9 3 X 5 7/8350000 DCMC354U035FD2D 4.5 33.0 3 1/2 X 4 5/8410000 DCMC414U035FE2D 4.0 36.2 3 1/2 X 5 1/8460000 DCMC464U035FF2D 3.6 39.2 3 1/2 X 5 5/8470000 DCMC474U035DN2D 3.8 39.8 3 X 7 5/8490000 DCMC494U035FP2D 3.5 41.1 3 1/2 X 5 7/8550000 DCMC554U035DG2D 3.6 40.9 3 X 8 5/8680000 DCMC684U035FN2D 3.4 45.7 3 1/2 X 7 5/8790000 DCMC794U035FG2D 3.3 48.4 3 1/2 X 8 5/8

50 Vdc (65 Vdc Surge)5900 DCMC592U050AK2B 47.9 4.1 1 3/8 X 1 5/8

10000 DCMC103U050AA2B 30.9 5.6 1 3/8 X 2 1/812000 DCMC123U050AH2B 25.9 6.7 1 3/8 X 2 5/816000 DCMC163U050AB2B 23.6 7.4 1 3/8 X 3 1/818000 DCMC183U050EA2B 22.8 8.0 1 3/4 X 2 1/821000 DCMC213U050AJ2B 19.6 9.0 1 3/8 X 3 5/821000 DCMC213U050EH2B 20.2 9.3 1 3/4 X 2 5/823000 DCMC233U050BA2B 25.3 8.6 2 X 2 1/826000 DCMC263U050AC2B 18.7 10.4 1 3/8 X 4 1/829000 DCMC293U050BH2B 20.8 8.0 2 X 2 5/830000 DCMC303U050EB2B 15.6 9.9 1 3/4 X 3 1/831000 DCMC313U050AD2B 17.9 9.9 1 3/8 X 4 5/835000 DCMC353U050AE2B 15.9 11.0 1 3/8 X 5 1/838000 DCMC383U050EJ2B 13.5 12.5 1 3/4 X 3 5/838000 DCMC383U050BB2B 16.3 11.9 2 X 3 1/840000 DCMC403U050AF2B 14.4 13.1 1 3/8 X 5 5/845000 DCMC453U050CH2B 15.1 13.3 2 1/2 X 2 5/847000 DCMC473U050EC2B 12.0 11.4 1 3/4 X 4 1/849000 DCMC493U050BJ2B 13.6 11.6 2 X 3 5/856000 DCMC563U050ED2B 10.8 13.8 1 3/4 X 4 5/860000 DCMC603U050BC2B 11.9 13.8 2 X 4 1/863000 DCMC633U050CB2B 12.0 14.4 2 1/2 X 3 1/864000 DCMC643U050EE2B 9.8 16.6 1 3/4 X 5 1/871000 DCMC713U050BD2B 10.8 16.4 2 X 4 5/873000 DCMC733U050EF2B 9.5 18.0 1 3/4 X 5 5/881000 DCMC813U050CJ2B 10.3 15.2 2 1/2 X 3 5/882000 DCMC823U050BE2B 10.0 16.4 2 X 5 1/893000 DCMC933U050BF2B 9.5 17.7 2 X 5 5/894000 DCMC943U050DB2B 9.1 18.9 3 X 3 1/899000 DCMC993U050CC2B 8.9 19.8 2 1/2 X 4 1/8

120000 DCMC124U050CD2B 7.9 21.8 2 1/2 X 4 5/8120000 DCMC124U050DJ2B 7.7 22.7 3 X 3 5/8130000 DCMC134U050CE2B 7.2 21.7 2 1/2 X 5 1/8150000 DCMC154U050CF2B 6.7 23.7 2 1/2 X 5 5/8150000 DCMC154U050DC2B 6.9 24.2 3 X 4 1/8170000 DCMC174U050DD2B 6.1 26.7 3 X 4 5/8200000 DCMC204U050DE2B 5.9 28.1 3 X 5 1/8200000 DCMC204U050FC2B 6.4 27.9 3 1/2 X 4 1/8230000 DCMC234U050DF2D 5.6 30.0 3 X 5 5/8230000 DCMC234U050FD2D 5.7 33.8 3 1/2 X 4 5/8240000 DCMC244U050DP2D 5.4 30.2 3 X 5 7/8270000 DCMC274U050FE2D 5.4 31.3 3 1/2 X 5 1/8310000 DCMC314U050FF2D 5.1 33.2 3 1/2 X 5 5/8320000 DCMC324U050FP2D 4.9 34.8 3 1/2 X 5 7/8350000 DCMC354U050DN2D 4.5 37.5 3 X 7 5/8390000 DCMC394U050DG2D 4.1 38.6 3 X 8 5/8450000 DCMC454U050FN2D 4.2 41.3 3 1/2 X 7 5/8520,000 DCMC524U050FG2D 3.8 44.9 3 1/2 X 8 5/8

63 Vdc (75 Vdc Surge)4100 DCMC412U063AK2B 60.6 3.6 1 3/8 X 1 5/8




Cap. Catalog 120 Hz 120 Hz D x LµF Part Number (mΩ) (A) (inches)

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Ratings


7000 DCMC702U063AA2B 39.0 5.0 1 3/8 X 2 1/88300 DCMC832U063AH2B 32.7 5.9 1 3/8 X 2 5/8

12000 DCMC123U063AB2B 28.6 6.8 1 3/8 X 3 1/813000 DCMC133U063EA2B 27.9 7.2 1 3/4 X 2 1/815000 DCMC153U063AJ2B 26.1 7.8 1 3/8 X 3 5/815000 DCMC153U063EH2B 25.6 8.2 1 3/4 X 2 5/815000 DCMC153U063BA2B 28.0 8.2 2 X 2 1/818000 DCMC183U063AC2B 22.0 9.6 1 3/8 X 4 1/818000 DCMC183U063BH2B 22.6 7.7 2 X 2 5/821000 DCMC213U063AD2B 19.3 8.9 1 3/8 X 4 5/821000 DCMC213U063EB2B 19.5 9.4 1 3/4 X 3 1/825000 DCMC253U063AE2B 17.3 10.6 1 3/8 X 5 1/825000 DCMC253U063BB2B 18.1 10.8 2 X 3 1/827000 DCMC273U063EJ2B 16.2 11.9 1 3/4 X 3 5/828000 DCMC283U063AF2B 15.8 12.5 1 3/8 X 5 5/829000 DCMC293U063CH2B 26.8 9.9 2 1/2 X 2 5/832000 DCMC323U063BJ2B 15.1 10.2 2 X 3 5/833000 DCMC333U063EC2B 14.2 11.3 1 3/4 X 4 1/839000 DCMC393U063ED2B 12.8 12.7 1 3/4 X 4 5/839000 DCMC393U063BC2B 13.3 13.1 2 X 4 1/841000 DCMC413U063CB2B 19.3 11.4 2 1/2 X 3 1/845000 DCMC453U063EE2B 11.8 15.1 1 3/4 X 5 1/846000 DCMC463U063BD2B 12.1 15.5 2 X 4 5/851000 DCMC513U063EF2B 11.2 16.6 1 3/4 X 5 5/852000 DCMC523U063CJ2B 17.1 11.8 2 1/2 X 3 5/853000 DCMC533U063BE2B 11.3 15.5 2 X 5 1/860000 DCMC603U063BF2B 10.7 16.7 2 X 5 5/861000 DCMC613U063DB2B 14.9 14.8 3 X 3 1/864000 DCMC643U063CC2B 13.7 16.0 2 1/2 X 4 1/876000 DCMC763U063CD2B 11.8 17.8 2 1/2 X 4 5/878000 DCMC783U063DJ2B 12.1 18.1 3 X 3 5/887000 DCMC873U063CE2B 11.0 17.6 2 1/2 X 5 1/895000 DCMC953U063DC2B 10.8 18.6 3 X 4 1/899000 DCMC993U063CF2B 10.5 19.7 2 1/2 X 5 5/8

110000 DCMC114U063DD2B 9.9 21.0 3 X 4 5/8130000 DCMC134U063DE2B 8.8 23.0 3 X 5 1/8130000 DCMC134U063FC2B 9.9 22.3 3 1/2 X 4 1/8150000 DCMC154U063DF2B 7.9 25.3 3 X 5 5/8150000 DCMC154U063FD2B 9.0 26.8 3 1/2 X 4 5/8160000 DCMC164U063DP2B 7.5 25.5 3 X 5 7/8180000 DCMC184U063FE2B 7.9 25.7 3 1/2 X 5 1/8200000 DCMC204U063FF2B 7.2 28.0 3 1/2 X 5 5/8210000 DCMC214U063FP2B 6.8 29.4 3 1/2 X 5 7/8230000 DCMC234U063DN2D 6.5 31.2 3 X 7 5/8250000 DCMC254U063DG2D 5.7 32.6 3 X 8 5/8300000 DCMC304U063FN2D 5.8 35.3 3 1/2 X 7 5/8350000 DCMC354U063FG2D 5.2 38.5 3 1/2 X 8 5/8

75 Vdc (95 Vdc Surge)3200 DCMC322U075AK2B 76.2 3.2 1 3/8 X 1 5/85300 DCMC532U075AA2B 50.7 4.4 1 3/8 X 2 1/86400 DCMC642U075AH2B 41.7 5.2 1 3/8 X 2 5/89000 DCMC902U075AB2B 38.6 5.8 1 3/8 X 3 1/89900 DCMC992U075EA2B 55.6 5.1 1 3/4 X 2 1/8

12000 DCMC123U075AJ2B 34.3 6.8 1 3/8 X 3 5/812000 DCMC123U075EH2B 47.3 6.1 1 3/4 X 2 5/812000 DCMC123U075BA2B 34.8 7.4 2 X 2 1/814000 DCMC143U075AC2B 30.5 8.1 1 3/8 X 4 1/814000 DCMC143U075BH2B 27.5 6.9 2 X 2 5/816000 DCMC163U075EB2B 34.1 6.7 1 3/4 X 3 1/8

17000 DCMC173U075AD2B 26.2 8.2 1 3/8 X 4 5/819000 DCMC193U075AE2B 23.8 9.0 1 3/8 X 5 1/819000 DCMC193U075BB2B 21.4 10.0 2 X 3 1/821000 DCMC213U075EJ2B 26.9 9.3 1 3/4 X 3 5/822000 DCMC223U075AF2B 21.4 10.8 1 3/8 X 5 5/823000 DCMC233U075CH2B 30.0 9.4 2 1/2 X 2 5/825000 DCMC253U075BJ2B 18.0 9.3 2 X 3 5/826000 DCMC263U075EC2B 22.3 9.0 1 3/4 X 4 1/830000 DCMC303U075ED2B 19.2 10.4 1 3/4 X 4 5/830000 DCMC303U075BC2B 15.6 12.1 2 X 4 1/832000 DCMC323U075CB2B 21.6 10.7 2 1/2 X 3 1/835000 DCMC353U075EE2B 16.9 12.6 1 3/4 X 5 1/835000 DCMC353U075BD2B 13.9 14.4 2 X 4 5/840000 DCMC403U075EF2B 15.2 14.3 1 3/4 X 5 5/841000 DCMC413U075BE2B 12.8 13.7 2 X 5 1/841000 DCMC413U075CJ2B 17.8 12.3 2 1/2 X 3 5/846000 DCMC463U075BF2B 12.0 15.8 2 X 5 5/847000 DCMC473U075DB2B 18.0 13.4 3 X 3 1/850000 DCMC503U075CC2B 15.1 15.2 2 1/2 X 4 1/859000 DCMC593U075CD2B 13.5 16.7 2 1/2 X 4 5/861000 DCMC613U075DJ2B 14.4 16.6 3 X 3 5/868000 DCMC683U075CE2B 12.0 16.8 2 1/2 X 5 1/874000 DCMC743U075DC2B 12.9 17.0 3 X 4 1/877000 DCMC773U075CF2B 11.2 19.0 2 1/2 X 5 5/888000 DCMC883U075DD2B 11.8 19.2 3 X 4 5/8

100000 DCMC104U075DE2B 10.4 21.1 3 X 5 1/8100000 DCMC104U075FC2B 11.8 20.4 3 1/2 X 4 1/8110000 DCMC114U075DF2B 9.4 23.3 3 X 5 5/8120000 DCMC124U075DP2B 8.9 26.9 3 X 5 7/8120000 DCMC124U075FD2B 10.7 21.4 3 1/2 X 4 5/8140000 DCMC144U075FE2B 9.4 23.7 3 1/2 X 5 1/8160000 DCMC164U075FF2B 8.4 25.7 3 1/2 X 5 5/8170000 DCMC174U075DN2D 7.7 28.1 3 X 7 5/8170000 DCMC174U075FP2B 8.1 27.1 3 1/2 X 5 7/8200000 DCMC204U075DG2B 6.8 29.8 3 X 8 5/8230000 DCMC234U075FN2D 6.9 32.3 3 1/2 X 7 5/8270000 DCMC274U075FG2D 6.2 35.2 3 1/2 X 8 5/8

100 Vdc (125 Vdc Surge)1900 DCMC192U100AK2B 98.4 2.9 1 3/8 X 1 5/83100 DCMC312U100AA2B 60.2 4.0 1 3/8 X 2 1/83900 DCMC392U100AH2B 51.0 4.7 1 3/8 X 2 5/85500 DCMC552U100AB2B 43.4 5.5 1 3/8 X 3 1/86000 DCMC602U100EA2B 62.0 4.8 1 3/4 X 2 1/86300 DCMC632U100BA2B 51.8 5.6 2 X 2 1/87000 DCMC702U100AJ2B 36.5 6.9 1 3/8 X 3 5/87100 DCMC712U100EH2B 52.8 6.0 1 3/4 X 2 5/88600 DCMC862U100AC2B 33.3 7.8 1 3/8 X 4 1/89000 DCMC902U100BH2B 37.8 5.9 2 X 2 5/89900 DCMC992U100EB2B 38.0 6.4 1 3/4 X 3 1/8

10000 DCMC103U100AD2B 31.1 7.5 1 3/8 X 4 5/812000 DCMC123U100AE2B 30.0 8.0 1 3/8 X 5 1/813000 DCMC133U100AF2B 29.0 8.6 1 3/8 X 5 5/813000 DCMC133U100EJ2B 29.9 8.8 1 3/4 X 3 5/813000 DCMC133U100BB2B 30.6 9.0 2 X 3 1/815000 DCMC153U100CH2B 33.7 8.9 2 1/2 X 2 5/816000 DCMC163U100EC2B 24.8 8.0 1 3/4 X 4 1/816000 DCMC163U100BJ2B 22.3 9.0 2 X 3 5/818000 DCMC183U100ED2B 21.2 9.8 1 3/4 X 4 5/820000 DCMC203U100BC2B 19.9 10.7 2 X 4 1/8





Aluminum

Screw Term

inalCom

puter GradeType DCMC, 85 °C High Capacitance, Computer Grade, Aluminum


CORNELLDUBILIER


Ratings

21000 DCMC213U100EE2B 18.7 11.5 1 3/4 X 5 1/821000 DCMC213U100CB2B 23.4 10.7 2 1/2 X 3 1/823000 DCMC233U100BD2B 17.7 12.8 2 X 4 5/824000 DCMC243U100EF2B 16.8 13.6 1 3/4 X 5 5/827000 DCMC273U100BE2B 15.6 12.4 2 X 5 1/827000 DCMC273U100CJ2B 19.1 11.9 2 1/2 X 3 5/831000 DCMC313U100BF2B 14.9 14.1 2 X 5 5/831000 DCMC313U100DB2B 19.9 12.8 3 X 3 1/833000 DCMC333U100CC2B 16.5 14.6 2 1/2 X 4 1/839000 DCMC393U100CD2B 14.7 16.0 2 1/2 X 4 5/840000 DCMC403U100DJ2B 16.4 15.6 3 X 3 5/845000 DCMC453U100CE2B 13.4 15.9 2 1/2 X 5 1/849000 DCMC493U100DC2B 14.4 16.1 3 X 4 1/851000 DCMC513U100CF2B 12.5 18.0 2 1/2 X 5 5/858000 DCMC583U100DD2B 13.0 18.3 3 X 4 5/867000 DCMC673U100DE2B 12.0 19.7 3 X 5 1/867000 DCMC673U100FC2B 13.4 19.2 3 1/2 X 4 1/876000 DCMC763U100DF2B 11.2 21.3 3 X 5 5/879000 DCMC793U100FD2B 12.1 23.1 3 1/2 X 4 5/880000 DCMC803U100DP2B 11.1 21.0 3 X 5 7/892000 DCMC923U100FE2B 10.9 22.0 3 1/2 X 5 1/8

100000 DCMC104U100FF2B 10.2 23.4 3 1/2 X 5 5/8110000 DCMC114U100DN2B 9.2 25.8 3 X 7 5/8110000 DCMC114U100FP2B 10.0 24.3 3 1/2 X 5 7/8130000 DCMC134U100DG2B 8.2 27.3 3 X 8 5/8150000 DCMC154U100FN2D 8.3 29.5 3 1/2 X 7 5/8180000 DCMC184U100FG2D 7.3 32.3 3 1/2 X 8 5/8

160 Vdc (200 Vdc Surge)1100 DCMC112T160AK2B 149.6 2.3 1 3/8 X 1 5/81800 DCMC182T160AA2B 93.0 3.3 1 3/8 X 2 1/82300 DCMC232T160AH2B 70.5 4.0 1 3/8 X 2 5/83200 DCMC322T160AB2B 58.5 4.7 1 3/8 X 3 1/83500 DCMC352T160EA2B 62.0 4.8 1 3/4 X 2 1/83700 DCMC372T160BA2B 70.5 4.8 2 X 2 1/84100 DCMC412T160AJ2B 50.2 5.9 1 3/8 X 3 5/84100 DCMC412T160EH2B 52.8 6.0 1 3/4 X 2 5/85000 DCMC502T160AC2B 42.9 6.9 1 3/8 X 4 1/85300 DCMC532T160BH2B 46.5 5.3 2 X 2 5/85800 DCMC582T160EB2B 38.0 6.4 1 3/4 X 3 1/85900 DCMC592T160AD2B 37.7 6.8 1 3/8 X 4 5/86800 DCMC682T160AE2B 34.7 7.5 1 3/8 X 5 1/87400 DCMC742T160EJ2B 29.9 8.4 1 3/4 X 3 5/87400 DCMC742T160BB2B 33.5 8.3 2 X 3 1/87700 DCMC772T160AF2B 32.2 8.8 1 3/8 X 5 5/88300 DCMC832T160CH2B 30.1 9.4 2 1/2 X 2 5/89100 DCMC912T160EC2B 24.8 8.0 1 3/4 X 4 1/89500 DCMC952T160BJ2B 26.4 8.3 2 X 3 5/8

11000 DCMC113T160ED2B 21.2 9.8 1 3/4 X 4 5/812000 DCMC123T160EE2B 18.7 11.0 1 3/4 X 5 1/812000 DCMC123T160BC2B 21.9 10.7 2 X 4 1/812000 DCMC123T160CB2B 21.3 11.2 2 1/2 X 3 1/814000 DCMC143T160EF2B 16.8 13.1 1 3/4 X 5 5/814000 DCMC143T160BD2B 18.8 12.8 2 X 4 5/815000 DCMC153T160CJ2B 17.0 11.9 2 1/2 X 3 5/816000 DCMC163T160BE2B 16.6 12.8 2 X 5 1/817000 DCMC173T160DB2B 14.7 14.3 3 X 3 1/818000 DCMC183T160BF2B 14.9 14.8 2 X 5 5/818000 DCMC183T160CC2B 14.1 15.8 2 1/2 X 4 1/822000 DCMC223T160CD2B 11.9 17.8 2 1/2 X 4 5/822000 DCMC223T160DJ2B 11.5 18.6 3 X 3 5/8

25000 DCMC253T160CE2B 10.7 17.8 2 1/2 X 5 1/827000 DCMC273T160DC2B 9.6 19.7 3 X 4 1/828000 DCMC283T160CF2B 9.6 20.5 2 1/2 X 5 5/832000 DCMC323T160DD2B 8.2 23.0 3 X 4 5/837000 DCMC373T160DE2B 7.3 25.3 3 X 5 1/837000 DCMC373T160FC2B 9.2 23.2 3 1/2 X 4 1/842000 DCMC423T160DF2B 6.5 27.9 3 X 5 5/844000 DCMC443T160FD2B 7.9 28.6 3 1/2 X 4 5/845000 DCMC453T160DP2B 6.2 28.1 3 X 5 7/851000 DCMC513T160FE2B 6.9 27.5 3 1/2 X 5 1/858000 DCMC583T160FF2B 6.2 30.0 3 1/2 X 5 5/861000 DCMC613T160FP2D 5.9 31.6 3 1/2 X 5 7/862000 DCMC623T160DN2D 5.1 34.9 3 X 7 5/872000 DCMC723T160DG2D 4.3 37.5 3 X 8 5/885000 DCMC853T160FN2D 4.9 38.8 3 1/2 X 7 5/899000 DCMC993T160FG2D 4.2 42.8 3 1/2 X 8 5/8

200 Vdc (250 Vdc Surge)680 DCMC681T200AK2B 205.8 2.0 1 3/8 X 1 5/8

1000 DCMC102T200AA2B 140.3 2.6 1 3/8 X 2 1/81500 DCMC152T200AH2B 100.5 3.4 1 3/8 X 2 5/81800 DCMC182T200AB2B 78.5 4.1 1 3/8 X 3 1/81900 DCMC192T200EA2B 79.1 4.3 1 3/4 X 2 1/82200 DCMC222T200AJ2B 63.9 5.0 1 3/8 X 3 5/82400 DCMC242T200EH2B 62.5 5.3 1 3/4 X 2 5/82500 DCMC252T200BA2B 82.0 4.8 2 X 2 1/82700 DCMC272T200AC2B 51.7 6.2 1 3/8 X 4 1/83100 DCMC312T200EB2B 48.4 5.2 1 3/4 X 3 1/83300 DCMC332T200AD2B 43.2 6.0 1 3/8 X 4 5/83300 DCMC332T200BH2B 61.0 5.3 2 X 2 5/83800 DCMC382T200EJ2B 37.9 7.2 1 3/4 X 3 5/83900 DCMC392T200AE2B 37.8 7.5 1 3/8 X 5 1/84300 DCMC432T200BB2B 46.1 7.1 2 X 3 1/84500 DCMC452T200AF2B 33.4 8.6 1 3/8 X 5 5/84600 DCMC462T200EC2B 31.3 9.2 1 3/4 X 4 1/85400 DCMC542T200ED2B 26.8 7.7 1 3/4 X 4 5/85500 DCMC552T200CH2B 42.2 6.6 2 1/2 X 2 5/85600 DCMC562T200BJ2B 36.2 7.5 2 X 3 5/86100 DCMC612T200EE2B 23.5 9.9 1 3/4 X 5 1/86900 DCMC692T200EF2B 21.0 10.9 1 3/4 X 5 5/86900 DCMC692T200BC2B 28.5 9.7 2 X 4 1/87100 DCMC712T200CB2B 31.2 9.6 2 1/2 X 3 1/88200 DCMC822T200BD2B 24.4 11.2 2 X 4 5/89100 DCMC912T200BE2B 21.7 10.5 2 X 5 1/8

10000 DCMC103T200BF2B 19.6 11.7 2 X 5 5/810000 DCMC103T200CJ2B 22.3 11.6 2 1/2 X 3 5/811000 DCMC113T200CC2B 20.3 12.7 2 1/2 X 4 1/811000 DCMC113T200DB2B 30.3 10.8 3 X 3 1/812000 DCMC123T200CD2B 17.3 14.7 2 1/2 X 4 5/813000 DCMC133T200CE2B 15.8 15.9 2 1/2 X 5 1/813000 DCMC133T200DJ2B 23.7 12.0 3 X 3 5/815000 DCMC153T200CF2B 13.7 16.5 2 1/2 X 5 5/815000 DCMC153T200DC2B 19.7 14.3 3 X 4 1/818000 DCMC183T200DD2B 16.9 16.1 3 X 4 5/821000 DCMC213T200FC2B 17.1 16.5 3 1/2 X 4 1/822000 DCMC223T200DE2B 14.8 18.2 3 X 5 1/824000 DCMC243T200DF2B 13.3 19.5 3 X 5 5/825000 DCMC253T200FD2B 15.3 20.5 3 1/2 X 4 5/826000 DCMC263T200DP2B 12.7 19.7 3 X 5 7/828000 DCMC283T200FE2B 13.4 19.8 3 1/2 X 5 1/831000 DCMC313T200FF2B 12.0 21.6 3 1/2 X 5 5/8





Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Ratings


33000 DCMC333T200DN2B 10.8 23.7 3 X 7 5/833000 DCMC333T200FP2B 11.5 22.7 3 1/2 X 5 7/837000 DCMC373T200DG2B 9.6 25.2 3 X 8 5/844000 DCMC443T200FN2D 9.3 28.2 3 1/2 X 7 5/851000 DCMC513T200FG2D 7.9 31.1 3 1/2 X 8 5/8

250 Vdc (300 Vdc Surge)470 DCMC471T250AK2B 259.7 1.8 1 3/8 X 1 5/8820 DCMC821T250AA2B 156.4 2.5 1 3/8 X 2 1/8

1200 DCMC122T250AH2B 118.7 3.1 1 3/8 X 2 5/81400 DCMC142T250EA2B 99.0 3.6 1 3/4 X 2 1/81500 DCMC152T250AB2B 88.0 4.1 1 3/8 X 3 1/81800 DCMC182T250EH2B 83.3 4.4 1 3/4 X 2 5/81800 DCMC182T250BA2B 94.7 4.3 2 X 2 1/81900 DCMC192T250AJ2B 69.5 5.2 1 3/8 X 3 5/82300 DCMC232T250AC2B 57.9 5.9 1 3/8 X 4 1/82300 DCMC232T250EB2B 61.3 4.6 1 3/4 X 3 1/82400 DCMC242T250AD2B 51.4 5.5 1 3/8 X 4 5/82500 DCMC252T250BH2B 65.7 5.2 2 X 2 5/82700 DCMC272T250AE2B 44.0 6.6 1 3/8 X 5 1/83000 DCMC302T250EJ2B 48.7 6.6 1 3/4 X 3 5/83300 DCMC332T250BB2B 46.2 7.1 2 X 3 1/83400 DCMC342T250AF2B 38.3 8.0 1 3/8 X 5 5/83700 DCMC372T250EC2B 40.5 8.1 1 3/4 X 4 1/83900 DCMC392T250ED2B 34.8 6.7 1 3/4 X 4 5/83900 DCMC392T250BJ2B 38.2 6.9 2 X 3 5/84100 DCMC412T250CH2B 51.8 6.3 2 1/2 X 2 5/84500 DCMC452T250EE2B 30.6 8.6 1 3/4 X 5 1/84700 DCMC472T250BC2B 31.5 8.9 2 X 4 1/85000 DCMC502T250EF2B 27.3 9.9 1 3/4 X 5 5/85200 DCMC522T250CB2B 32.1 9.5 2 1/2 X 3 1/85600 DCMC562T250BD2B 26.9 10.7 2 X 4 5/86200 DCMC622T250BE2B 23.6 10.1 2 X 5 1/86400 DCMC642T250CJ2B 25.1 10.4 2 1/2 X 3 5/86800 DCMC682T250BF2B 21.2 11.9 2 X 5 5/87800 DCMC782T250DB2B 27.6 10.9 3 X 3 1/88200 DCMC822T250CC2B 20.8 13.0 2 1/2 X 4 1/8

10000 DCMC103T250CD2B 17.8 14.5 2 1/2 X 4 5/810000 DCMC103T250DJ2B 21.6 13.6 3 X 3 5/811000 DCMC113T250CE2B 15.5 14.8 2 1/2 X 5 1/812000 DCMC123T250CF2B 13.8 16.5 2 1/2 X 5 5/812000 DCMC123T250DC2B 17.6 15.2 3 X 4 1/813000 DCMC133T250DD2B 16.3 16.4 3 X 4 5/815000 DCMC153T250DE2B 14.3 18.0 3 X 5 1/816000 DCMC163T250FC2B 19.5 15.9 3 1/2 X 4 1/818000 DCMC183T250DF2B 12.0 20.6 3 X 5 5/818000 DCMC183T250FD2B 17.1 19.4 3 1/2 X 4 5/819000 DCMC193T250DP2B 11.5 20.6 3 X 5 7/821000 DCMC213T250FE2B 15.1 18.7 3 1/2 X 5 1/823000 DCMC233T250FF2B 13.4 20.4 3 1/2 X 5 5/824000 DCMC243T250FP2B 12.9 21.4 3 1/2 X 5 7/827000 DCMC273T250DN2D 9.5 27.2 3 X 7 5/830000 DCMC303T250DG2B 7.0 29.6 3 X 8 5/833000 DCMC333T250FN2B 10.6 26.2 3 1/2 X 7 5/838000 DCMC383T250FG2B 9.2 28.8 3 1/2 X 8 5/8

300 Vdc (350 Vdc Surge)330 DCMC331T300AK2B 418.1 1.4 1 3/8 X 1 5/8600 DCMC601T300AA2B 231.4 2.1 1 3/8 X 2 1/8730 DCMC731T300AH2B 188.8 2.5 1 3/8 X 2 5/8

1000 DCMC102T300AB2B 137.5 3.1 1 3/8 X 3 1/8

1000 DCMC102T300EA2B 139.3 3.2 1 3/4 X 2 1/81200 DCMC122T300EH2B 117.2 3.7 1 3/4 X 2 5/81200 DCMC122T300BA2B 131.1 3.6 2 X 2 1/81300 DCMC132T300AJ2B 106.8 4.2 1 3/8 X 3 5/81500 DCMC152T300AC2B 90.4 4.7 1 3/8 X 4 1/81500 DCMC152T300BH2B 102.6 3.6 2 X 2 5/81700 DCMC172T300EB2B 84.5 4.3 1 3/4 X 3 1/81800 DCMC182T300AD2B 77.4 4.7 1 3/8 X 4 5/82100 DCMC212T300AE2B 65.7 5.4 1 3/8 X 5 1/82100 DCMC212T300EJ2B 68.3 5.6 1 3/4 X 3 5/82200 DCMC222T300BB2B 71.1 5.7 2 X 3 1/82300 DCMC232T300AF2B 60.3 6.4 1 3/8 X 5 5/82600 DCMC262T300EC2B 56.7 6.8 1 3/4 X 4 1/82600 DCMC262T300CH2B 60.5 5.1 2 1/2 X 2 5/82800 DCMC282T300BJ2B 55.5 5.7 2 X 3 5/83000 DCMC302T300ED2B 48.5 6.5 1 3/4 X 4 5/83300 DCMC332T300CB2B 46.5 7.0 2 1/2 X 3 1/83400 DCMC342T300BC2B 45.7 7.4 2 X 4 1/83500 DCMC352T300EE2B 42.5 8.0 1 3/4 X 5 1/83900 DCMC392T300EF2B 37.9 8.7 1 3/4 X 5 5/84000 DCMC402T300BD2B 38.9 8.9 2 X 4 5/84200 DCMC422T300CJ2B 38.1 7.9 2 1/2 X 3 5/84600 DCMC462T300BE2B 34.0 8.9 2 X 5 1/84800 DCMC482T300DB2B 42.8 8.4 3 X 3 1/85200 DCMC522T300CC2B 29.9 10.4 2 1/2 X 4 1/85300 DCMC532T300BF2B 30.2 10.8 2 X 5 5/86000 DCMC602T300DJ2B 34.0 10.5 3 X 3 5/86100 DCMC612T300CD2B 25.5 12.5 2 1/2 X 4 5/87100 DCMC712T300CE2B 22.2 12.3 2 1/2 X 5 1/87400 DCMC742T300DC2B 26.2 11.9 3 X 4 1/88000 DCMC802T300CF2B 19.8 14.3 2 1/2 X 5 5/88700 DCMC872T300DD2B 23.6 13.6 3 X 4 5/8

10000 DCMC103T300DE2B 20.5 15.1 3 X 5 1/810000 DCMC103T300FC2B 21.0 15.3 3 1/2 X 4 1/811000 DCMC113T300DF2B 18.0 16.8 3 X 5 5/812000 DCMC123T300DP2B 17.0 19.5 3 X 5 7/812000 DCMC123T300FD2B 18.2 16.4 3 1/2 X 4 5/813000 DCMC133T300FE2B 16.0 18.1 3 1/2 X 5 1/815000 DCMC153T300FF2B 14.3 19.8 3 1/2 X 5 5/816000 DCMC163T300DN2B 13.2 21.8 3 X 7 5/816000 DCMC163T300FP2B 13.5 20.9 3 1/2 X 5 7/819000 DCMC193T300DG2B 10.8 23.7 3 X 8 5/822000 DCMC223T300FN2B 11.0 25.9 3 1/2 X 7 5/826000 DCMC263T300FG2B 9.3 28.6 3 1/2 X 8 5/8

350 Vdc (400 Vdc Surge)220 DCMC221T350AK2B 605.4 1.2 1 3/8 X 1 5/8430 DCMC431T350AA2B 378.8 1.6 1 3/8 X 2 1/8510 DCMC511T350AH2B 253.0 2.1 1 3/8 X 2 5/8680 DCMC681T350AB2B 190.2 2.6 1 3/8 X 3 1/8760 DCMC761T350EA2B 176.6 2.9 1 3/4 X 2 1/8860 DCMC861T350AJ2B 152.5 3.2 1 3/8 X 3 5/8920 DCMC921T350EH2B 161.7 3.3 1 3/4 X 2 5/8990 DCMC991T350BA2B 167.6 3.3 2 X 2 1/8

1000 DCMC102T350AC2B 127.5 4.0 1 3/8 X 4 1/81200 DCMC122T350AD2B 109.6 3.5 1 3/8 X 4 5/81200 DCMC122T350EB2B 124.7 3.5 1 3/4 X 3 1/81200 DCMC122T350BH2B 132.2 3.6 2 X 2 5/81300 DCMC132T350AE2B 97.2 4.5 1 3/8 X 5 1/81500 DCMC152T350AF2B 85.9 5.0 1 3/8 X 5 5/8





Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings


1500 DCMC152T350EJ2B 97.3 4.9 1 3/4 X 3 5/81500 DCMC152T350BB2B 101.5 4.9 2 X 3 1/81800 DCMC182T350EC2B 79.9 5.8 1 3/4 X 4 1/81900 DCMC192T350BJ2B 79.2 4.4 2 X 3 5/82000 DCMC202T350CH2B 86.9 4.6 2 1/2 X 2 5/82100 DCMC212T350ED2B 67.8 5.5 1 3/4 X 4 5/82300 DCMC232T350BC2B 65.1 5.9 2 X 4 1/82400 DCMC242T350EE2B 59.1 6.5 1 3/4 X 5 1/82500 DCMC252T350CB2B 61.0 6.6 2 1/2 X 3 1/82700 DCMC272T350EF2B 52.4 7.4 1 3/4 X 5 5/82700 DCMC272T350BD2B 55.4 7.5 2 X 4 5/83100 DCMC312T350BE2B 48.7 7.0 2 X 5 1/83100 DCMC312T350CJ2B 48.5 7.5 2 1/2 X 3 5/83500 DCMC352T350BF2B 42.8 8.3 2 X 5 5/83700 DCMC372T350CC2B 39.9 9.0 2 1/2 X 4 1/83800 DCMC382T350DB2B 54.0 8.1 3 X 3 1/84200 DCMC422T350CD2B 34.0 10.5 2 1/2 X 4 5/84600 DCMC462T350DJ2B 41.7 9.8 3 X 3 5/84800 DCMC482T350CE2B 29.6 10.7 2 1/2 X 5 1/85400 DCMC542T350CF2B 26.2 11.9 2 1/2 X 5 5/85500 DCMC552T350DC2B 34.7 10.8 3 X 4 1/86300 DCMC632T350DD2B 29.6 12.2 3 X 4 5/87200 DCMC722T350DE2B 25.8 13.4 3 X 5 1/87700 DCMC772T350FC2B 29.9 12.8 3 1/2 X 4 1/88200 DCMC822T350DF2B 22.9 14.9 3 X 5 5/88400 DCMC842T350DP2B 21.7 17.2 3 X 5 7/88800 DCMC882T350FD2B 25.7 13.8 3 1/2 X 4 5/8

10000 DCMC103T350FE2B 22.5 15.3 3 1/2 X 5 1/811000 DCMC113T350DN2B 17.1 19.1 3 X 7 5/811000 DCMC113T350FF2B 20.0 16.7 3 1/2 X 5 5/812000 DCMC123T350FP2B 18.9 17.7 3 1/2 X 5 7/813000 DCMC133T350DG2B 14.2 20.7 3 X 8 5/816000 DCMC163T350FN2B 14.9 22.3 3 1/2 X 7 5/818000 DCMC183T350FG2B 12.4 24.8 3 1/2 X 8 5/8

400 Vdc (450 Vdc Surge)180 DCMC181T400AK2B 652.4 1.1 1 3/8 X 1 5/8350 DCMC351T400AA2B 408.2 1.6 1 3/8 X 2 1/8420 DCMC421T400AH2B 272.6 2.1 1 3/8 X 2 5/8570 DCMC571T400AB2B 204.8 2.5 1 3/8 X 3 1/8630 DCMC631T400EA2B 189.5 2.8 1 3/4 X 2 1/8710 DCMC711T400AJ2B 164.3 3.1 1 3/8 X 3 5/8760 DCMC761T400EH2B 173.7 3.2 1 3/4 X 2 5/8820 DCMC821T400BA2B 179.3 3.2 2 X 2 1/8850 DCMC851T400AC2B 137.3 3.8 1 3/8 X 4 1/8

1000 DCMC102T400AD2B 118.0 3.4 1 3/8 X 4 5/81000 DCMC102T400EB2B 134.0 3.4 1 3/4 X 3 1/81000 DCMC102T400BH2B 141.7 3.5 2 X 2 5/81100 DCMC112T400AE2B 104.6 4.3 1 3/8 X 5 1/81200 DCMC122T400AF2B 92.4 4.8 1 3/8 X 5 5/81200 DCMC122T400EJ2B 106.6 4.6 1 3/4 X 3 5/81300 DCMC132T400BB2B 108.9 4.8 2 X 3 1/81500 DCMC152T400EC2B 85.8 5.6 1 3/4 X 4 1/81600 DCMC162T400BJ2B 85.0 4.3 2 X 3 5/81700 DCMC172T400ED2B 74.3 4.9 1 3/4 X 4 5/81700 DCMC172T400CH2B 93.1 4.7 2 1/2 X 2 5/81900 DCMC192T400BC2B 69.8 5.7 2 X 4 1/82000 DCMC202T400EE2B 63.4 6.3 1 3/4 X 5 1/82100 DCMC212T400CB2B 65.3 6.4 2 1/2 X 3 1/8

2200 DCMC222T400EF2B 57.3 7.1 1 3/4 X 5 5/82300 DCMC232T400BD2B 59.3 7.2 2 X 4 5/82600 DCMC262T400BE2B 52.2 6.8 2 X 5 1/82600 DCMC262T400CJ2B 52.0 7.2 2 1/2 X 3 5/82900 DCMC292T400BF2B 45.9 8.1 2 X 5 5/83100 DCMC312T400CC2B 42.8 8.7 2 1/2 X 4 1/83200 DCMC322T400DB2B 57.5 7.8 3 X 3 1/83900 DCMC392T400CD2B 35.6 10.3 2 1/2 X 4 5/83900 DCMC392T400DJ2B 44.9 9.4 3 X 3 5/84000 DCMC402T400CE2B 31.7 10.3 2 1/2 X 5 1/84700 DCMC472T400CF2B 28.1 11.5 2 1/2 X 5 5/84700 DCMC472T400DC2B 37.0 10.5 3 X 4 1/85300 DCMC532T400DD2B 31.5 11.8 3 X 4 5/86000 DCMC602T400DE2B 27.4 13.0 3 X 5 1/86400 DCMC642T400FC2B 31.9 12.4 3 1/2 X 4 1/86800 DCMC682T400DF2B 24.4 14.4 3 X 5 5/87100 DCMC712T400DP2B 23.1 16.7 3 X 5 7/87400 DCMC742T400FD2B 27.4 13.4 3 1/2 X 4 5/88400 DCMC842T400FE2B 23.9 14.8 3 1/2 X 5 1/89400 DCMC942T400FF2B 21.2 16.2 3 1/2 X 5 5/89600 DCMC962T400DN2B 18.2 18.6 3 X 7 5/89900 DCMC992T400FP2B 20.1 17.2 3 1/2 X 5 7/8

11000 DCMC113T400DG2B 15.1 20.1 3 X 8 5/813000 DCMC133T400FN2B 15.8 21.7 3 1/2 X 7 5/815000 DCMC153T400FG2B 13.1 24.1 3 1/2 X 8 5/8

450 Vdc (500 Vdc Surge)150 DCMC151T450AK2B 796.7 1.0 1 3/8 X 1 5/8270 DCMC271T450AA2B 437.7 1.5 1 3/8 X 2 1/8350 DCMC351T450AH2B 337.1 1.8 1 3/8 X 2 5/8460 DCMC461T450EA2B 264.2 2.2 1 3/4 X 2 1/8470 DCMC471T450AB2B 253.2 2.4 1 3/8 X 3 1/8560 DCMC561T450AJ2B 203.0 2.8 1 3/8 X 3 5/8570 DCMC571T450EH2B 213.1 2.9 1 3/4 X 2 5/8590 DCMC591T450BA2B 228.4 2.9 2 X 2 1/8680 DCMC681T450AC2B 169.5 3.4 1 3/8 X 4 1/8740 DCMC741T450EB2B 164.5 2.8 1 3/4 X 3 1/8780 DCMC781T450BH2B 178.0 2.9 2 X 2 5/8820 DCMC821T450AD2B 145.6 3.5 1 3/8 X 4 5/8920 DCMC921T450EJ2B 130.9 3.8 1 3/4 X 3 5/8930 DCMC931T450AE2B 127.7 4.1 1 3/8 X 5 1/8

1000 DCMC102T450AF2B 113.9 4.5 1 3/8 X 5 5/81000 DCMC102T450BB2B 137.0 4.3 2 X 3 1/81100 DCMC112T450EC2B 107.4 5.0 1 3/4 X 4 1/81200 DCMC122T450BJ2B 109.0 3.8 2 X 3 5/81200 DCMC122T450CH2B 115.8 4.0 2 1/2 X 2 5/81300 DCMC132T450ED2B 91.1 4.7 1 3/4 X 4 5/81500 DCMC152T450EE2B 79.2 5.4 1 3/4 X 5 1/81500 DCMC152T450BC2B 89.5 5.3 2 X 4 1/81700 DCMC172T450EF2B 70.2 6.2 1 3/4 X 5 5/81700 DCMC172T450CB2B 81.1 6.0 2 1/2 X 3 1/81800 DCMC182T450BD2B 76.0 6.4 2 X 4 5/81900 DCMC192T450BE2B 66.8 6.0 2 X 5 1/82000 DCMC202T450CJ2B 66.5 6.4 2 1/2 X 3 5/82200 DCMC222T450BF2B 58.6 7.1 2 X 5 5/82400 DCMC242T450CC2B 54.7 7.7 2 1/2 X 4 1/82500 DCMC252T450DB2B 65.7 7.3 3 X 3 1/82800 DCMC282T450CD2B 46.4 9.0 2 1/2 X 4 5/83000 DCMC302T450DJ2B 52.2 8.7 3 X 3 5/8








CORNELLDUBILIER


Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de

Ratings


3300 DCMC332T450CE2B 40.4 9.2 2 1/2 X 5 1/83900 DCMC392T450CF2B 35.4 10.3 2 1/2 X 5 5/83900 DCMC392T450DC2B 40.1 10.1 3 X 4 1/84100 DCMC412T450DD2B 37.5 10.8 3 X 4 5/84700 DCMC472T450DE2B 32.5 12.0 3 X 5 1/85000 DCMC502T450FC2B 31.8 12.5 3 1/2 X 4 1/85600 DCMC562T450DF2B 28.8 13.3 3 X 5 5/85800 DCMC582T450DP2B 27.3 15.4 3 X 5 7/85800 DCMC582T450FD2B 27.0 13.5 3 1/2 X 4 5/86800 DCMC682T450FE2B 23.5 15.0 3 1/2 X 5 1/87300 DCMC732T450FF2B 21.1 16.3 3 1/2 X 5 5/87700 DCMC772T450FP2B 20.0 17.2 3 1/2 X 5 7/87900 DCMC792T450DN2B 21.3 17.1 3 X 7 5/89000 DCMC902T450DG2B 17.6 18.6 3 X 8 5/8

10000 DCMC103T450FN2B 15.9 21.6 3 1/2 X 7 5/812000 DCMC123T450FG2B 13.3 24.0 3 1/2 X 8 5/8

500 Vdc (550 Vdc Surge)110 DCMC111T500AK2B 1224.3 0.8 1 3/8 X 1 5/8180 DCMC181T500AA2B 736.9 1.2 1 3/8 X 2 1/8240 DCMC241T500AH2B 556.5 1.4 1 3/8 X 2 5/8270 DCMC271T500EA2B 498.4 1.6 1 3/4 X 2 1/8320 DCMC321T500AB2B 409.7 1.9 1 3/8 X 3 1/8340 DCMC341T500BA2B 393.1 2.0 2 X 2 1/8380 DCMC381T500EH2B 347.2 2.2 1 3/4 X 2 5/8400 DCMC401T500AJ2B 338.1 2.4 1 3/8 X 3 5/8470 DCMC471T500BH2B 273.9 2.7 2 X 2 5/8480 DCMC481T500AC2B 293.2 2.1 1 3/8 X 4 1/8500 DCMC501T500EB2B 264.5 2.4 1 3/4 X 3 1/8560 DCMC561T500AD2B 261.2 2.6 1 3/8 X 4 5/8640 DCMC641T500AE2B 231.1 2.9 1 3/8 X 5 1/8650 DCMC651T500EJ2B 202.0 3.2 1 3/4 X 3 5/8700 DCMC701T500BB2B 200.1 3.4 2 X 3 1/8720 DCMC721T500AF2B 195.4 3.6 1 3/8 X 5 5/8790 DCMC791T500EC2B 172.4 3.9 1 3/4 X 4 1/8800 DCMC801T500CH2B 170.6 3.0 2 1/2 X 2 5/8860 DCMC861T500BJ2B 159.1 3.4 2 X 3 5/8930 DCMC931T500ED2B 149.1 3.7 1 3/4 X 4 5/8

1000 DCMC102T500BC2B 138.7 4.1 2 X 4 1/81100 DCMC112T500EE2B 129.6 4.4 1 3/4 X 5 1/81100 DCMC112T500CB2B 122.0 4.7 2 1/2 X 3 1/81200 DCMC122T500EF2B 114.7 5.0 1 3/4 X 5 5/81200 DCMC122T500BD2B 117.7 5.1 2 X 4 5/81400 DCMC142T500BE2B 102.3 4.8 2 X 5 1/81400 DCMC142T500CJ2B 95.1 5.3 2 1/2 X 3 5/81500 DCMC152T500BF2B 93.3 5.7 2 X 5 5/81700 DCMC172T500CC2B 79.7 6.4 2 1/2 X 4 1/81700 DCMC172T500DB2B 86.4 6.4 3 X 3 1/82100 DCMC212T500CE2B 61.1 7.8 2 1/2 X 5 1/82200 DCMC222T500CD2B 68.3 7.6 2 1/2 X 4 5/82200 DCMC222T500DJ2B 67.4 7.1 3 X 3 5/82500 DCMC252T500CF2B 54.7 8.3 2 1/2 X 5 5/82500 DCMC252T500DC2B 55.4 8.6 3 X 4 1/83000 DCMC302T500DD2B 48.1 9.5 3 X 4 5/83400 DCMC342T500DE2B 43.1 10.4 3 X 5 1/83500 DCMC352T500FC2B 40.1 11.1 3 1/2 X 4 1/83900 DCMC392T500DF2B 37.5 11.6 3 X 5 5/84100 DCMC412T500DP2B 35.5 13.5 3 X 5 7/84100 DCMC412T500FD2B 34.1 12.0 3 1/2 X 4 5/84800 DCMC482T500FE2B 30.0 13.2 3 1/2 X 5 1/85400 DCMC542T500FF2B 28.0 14.2 3 1/2 X 5 5/85700 DCMC572T500FP2B 26.0 15.1 3 1/2 X 5 7/85700 DCMC572T500DN2B 27.9 15.0 3 X 7 5/86600 DCMC662T500DG2B 23.1 16.2 3 X 8 5/87900 DCMC792T500FN2B 20.5 19.1 3 1/2 X 7 5/89,200 DCMC922T500FG2B 16.7 21.4 3 1/2 X 8 5/8

550 Vdc (600 Vdc Surge)1400 DCMC142T550CC2B 170.5 4.90 2 1/2 X 4.1251700 DCMC172T550CD2B 132.6 5.90 2 1/2 X 4.6251900 DCMC192T550CE2B 111.7 6.80 2 1/2 X 5.1252200 DCMC222T550DC2B 90.4 7.80 3 X 4.1252300 DCMC232T550CF2B 86.5 7.80 2 1/2 X 5.6252500 DCMC252T550DD2B 79.6 8.40 3 X 4.6252900 DCMC292T550DE2B 64.0 9.70 3 X 5.1253400 DCMC342T550DF2B 54.6 10.90 3 X 5.625





Aluminum

Screw Term

inalCom

puter Grade


Rated Voltage: 6.3 to 500 VdcCapacitance: 100 F to 2.6 F

Capacitance Tolerance: <200 Vdc: 10 +75% 200 Vdc: 10% +50%Leakage Current: 3CV A at 5 minutes; 4mA max.Cold Impedance: 20 ˚C multiple of 25 ˚C Z 20 for 6.3–10V, 8 for 16–50V,

4 for 63–100V, 3 for 150V and up.Ripple Current Multipliers: Ambient Temperature

Frequency


1 3/8” & 1 3/4” Diameters:6.3 to 160 V 0.91 0.93 1.00 1.06 1.08 1.10 1.10200 to 350 V 0.76 0.81 1.00 1.24 1.36 1.43 1.44400 to 500 Vx 0.76 0.81 1.00 1.24 1.37 1.44 1.45

2” & 2 1/2” Diameters:6.3 to 160 V 0.93 0.95 1.00 1.04 1.06 1.06 1.07200 to 350 V 0.78 0.83 1.00 1.20 1.29 1.34 1.35

400 to 500 V 0.77 0.82 1.00 1.22 1.33 1.39 1.403” & 3 1/2” Diameters:

6.3 to 160 V 0.95 0.97 1.00 1.03 1.04 1.04 1.04200 to 350 V 0.84 0.88 1.00 1.12 1.17 1.20 1.20400 to 500 V 0.79 0.84 1.00 1.18 1.26 1.31 1.32

EIA Ripple Life: 5,000 h at full load @ +85 °C per EIA IS-749 Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h @ +95 °C, Capacitance, ESR and DCL, initial requirements.Vibration: 10 to 55 Hz, 0.06” and 10 g max, 1.5 h ea. of 2 axis


CORNELLDUBILIER


Highlights Long-life, High-Capacitance Better for Power-supply and UPS systems Thermal-Pak extended cathode construction

Type 500C, 95 °C Long-life, Computer Grade, Aluminum

Computer Grade, 40 °C to +95 °C, Long Life

Twice the Life!Type 500C capacitors are designed for mainframe computersand other long life UPS and power supply filter applications.They deliver nearly as much capacitance as the Type DCMCcapacitors, but with two times the life expectancy. Theyare an excellent choice for high ripple applications. Theextended cathode foil of the 500C assures cool operationwith heat flow from the capacitor element to the can.

45 °C 55 °C 65 °C 75 °C 85 °C2.00 1.82 1.59 1.33 1.00

F

ripple

life520Cp 2.028

520Cp 2.028

cold101Cp 2.040

MOREDCMCp 2.005



Terminal Dimensions

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER



Case DimensionsOutline Drawings



Stud Dimensions

Diam. (D) Length (L) Terminals (S)Case .031 .78 .062 1.57 0.015 .38 Typical WeightCode Inches mm Inches mm Inches mm oz g

AK 1.375 34.93 1.625 41.28 0.500 12.70 1.9 54AA 1.375 34.93 2.125 53.98 0.500 12.70 2.0 57AH 1.375 34.93 2.625 66.68 0.500 12.70 2.7 77AB 1.375 34.93 3.125 79.38 0.500 12.70 3.3 94AJ 1.375 34.93 3.625 92.08 0.500 12.70 3.8 108AC 1.375 34.93 4.125 104.78 0.500 12.70 4.4 125AD 1.375 34.93 4.625 117.48 0.500 12.70 5.1 145AE 1.375 34.93 5.125 130.18 0.500 12.70 6.8 193AF 1.375 34.93 5.625 142.88 0.500 12.70 8.1 230EA 1.750 44.45 2.125 53.98 0.750 19.05 2.7 76EH 1.750 44.45 2.625 66.68 0.750 19.05 3.8 108EB 1.750 44.45 3.125 79.38 0.750 19.05 5.1 145EJ 1.750 44.45 3.625 92.08 0.750 19.05 6.8 193EC 1.750 44.45 4.125 104.78 0.750 19.05 8.1 230ED 1.750 44.45 4.625 117.48 0.750 19.05 9.0 255EE 1.750 44.45 5.125 130.18 0.750 19.05 9.5 269EF 1.750 44.45 5.625 142.88 0.750 19.05 10.5 298BA 2.000 50.80 2.125 53.98 0.875 22.23 5.4 153BH 2.000 50.80 2.625 66.68 0.875 22.23 6.1 173BB 2.000 50.80 3.125 79.38 0.875 22.23 6.8 193BJ 2.000 50.80 3.625 92.08 0.875 22.23 8.2 232BC 2.000 50.80 4.125 104.78 0.875 22.23 9.5 269BD 2.000 50.80 4.625 117.48 0.875 22.23 10.3 292BE 2.000 50.80 5.125 130.18 0.875 22.23 10.7 303BF 2.000 50.80 5.625 142.88 0.875 22.23 13.0 369CH 2.500 63.50 2.625 66.68 1.125 28.58 9.2 261CB 2.500 63.50 3.125 79.38 1.125 28.58 10.4 295CJ 2.500 63.50 3.625 92.08 1.125 28.58 12.7 361CC 2.500 63.50 4.125 104.78 1.125 28.58 15.0 425CD 2.500 63.50 4.625 117.48 1.125 28.58 17.2 488CE 2.500 63.50 5.125 130.18 1.125 28.58 19.3 547CF 2.500 63.50 5.625 142.88 1.125 28.58 21.4 607DJ 3.000 76.20 3.625 92.08 1.250 31.75 20.0 567DC 3.000 76.20 4.125 104.78 1.250 31.75 22.2 629DD 3.000 76.20 4.625 117.48 1.250 31.75 25.5 723DE 3.000 76.20 5.125 130.18 1.250 31.75 30.0 850DF 3.000 76.20 5.625 142.88 1.250 31.75 31.9 904DP 3.000 76.20 5.875 149.23 1.250 31.75 32.8 931DN 3.000 76.20 7.625 193.68 1.250 31.75 39.5 1119DG 3.000 76.20 8.625 219.08 1.250 31.75 43.3 1227FC 3.500 88.90 4.125 104.78 1.250 31.75 30.0 850FD 3.500 88.90 4.625 117.48 1.250 31.75 34.4 976FE 3.500 88.90 5.125 130.18 1.250 31.75 40.5 1148FF 3.500 88.90 5.625 142.88 1.250 31.75 43.1 1221FP 3.500 88.90 5.875 149.23 1.250 31.75 44.3 1257FN 3.500 88.90 7.625 193.68 1.250 31.75 53.3 1512FG 3.500 88.90 8.625 219.08 1.250 31.75 58.5 1658


+0-.062

(+0-1.57)

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER



Part Numbering System500C 492 U 063 AA 2 B S

Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style500C 100 = 10 F M = 20% 6R3 = 6.3 Vdc 0 = None A = Low Post Blank =

101 = 100 F U = 10%+75% 063 = 63 Vdc 1 = Polyester B = High Post Standard492 = 4900 F T = 10%+50% 100 = 100 Vdc 2 = PVC D = High Current, Can433 = 43,000 F Low Post S = Stud

E = High Current, MountHigh Post P = Stud with

F = M5 Post thermalpad


Impedance vs. Frequency @ +25C Temperature Characteristics - 29,000 F 50 Vdc

Temperature Characteristics - 98,000 F 10 Vdc Temperature Characteristics - 4200 F 100 Vdc


Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Ratings

6.3 Vdc (8 Vdc Surge)27000 500C273U6R3AK2B 46.9 4.7 1 3/8 X 1 5/855000 500C553U6R3AA2B 26.5 6.9 1 3/8 X 2 1/866000 500C663U6R3AH2B 18.8 8.9 1 3/8 X 2 5/887000 500C873U6R3AB2B 14.7 10.7 1 3/8 X 3 1/896000 500C963U6R3EA2B 18.8 9.6 1 3/4 X 2 1/8

110000 500C114U6R3AJ2B 12.8 12.1 1 3/8 X 3 5/8120000 500C124U6R3EH2B 14.3 11.8 1 3/4 X 2 5/8120000 500C124U6R3BA2B 14.2 12.0 2 X 2 1/8130000 500C134U6R3AC2B 11.0 13.7 1 3/8 X 4 1/8140000 500C144U6R3BH2B 9.9 15.5 2 X 2 5/8150000 500C154U6R3AD2B 9.8 15.2 1 3/8 X 4 5/8160000 500C164U6R3EB2B 11.0 14.3 1 3/4 X 3 1/8170000 500C174U6R3AE2B 8.9 16.5 1 3/8 X 5 1/8190000 500C194U6R3AF2B 8.3 17.8 1 3/8 X 5 5/8190000 500C194U6R3EJ2B 9.1 16.6 1 3/4 X 3 5/8200000 500C204U6R3BB2B 7.8 18.4 2 X 3 1/8230000 500C234U6R3EC2B 7.9 18.7 1 3/4 X 4 1/8250000 500C254U6R3BJ2B 6.5 21.4 2 X 3 5/8250000 500C254U6R3CH2B 6.9 21.2 2 1/2 X 2 5/8270000 500C274U6R3ED2B 7.0 20.6 1 3/4 X 4 5/8300000 500C304U6R3BC2B 5.6 24.1 2 X 4 1/8310000 500C314U6R3EE2B 6.4 22.4 1 3/4 X 5 1/8340000 500C344U6R3CB2B 5.3 25.8 2 1/2 X 3 1/8350000 500C354U6R3EF2B 6.0 24.0 1 3/4 X 5 5/8360000 500C364U6R3BD2B 5.0 26.6 2 X 4 5/8410000 500C414U6R3BE2B 4.5 28.8 2 X 5 1/8420000 500C424U6R3CJ2B 4.3 29.9 2 1/2 X 3 5/8450000 500C454U6R3BF2D 4.2 30.9 2 X 5 5/8500000 500C504U6R3DB2D 4.1 32.9 3 X 3 1/8510000 500C514U6R3CC2D 3.8 33.4 2 1/2 X 4 1/8580000 500C584U6R3CD2D 3.4 36.8 2 1/2 X 4 5/8620000 500C624U6R3DJ2D 3.3 38.2 3 X 3 5/8680000 500C684U6R3CE2D 3.1 40.0 2 1/2 X 5 1/8740000 500C744U6R3DC2D 2.9 42.5 3 X 4 1/8760000 500C764U6R3CF2D 2.8 42.9 2 1/2 X 5 5/8

880000 500C884U6R3DD2D 2.6 46.7 3 X 4 5/8980000 500C984U6R3DE2D 2.4 50.6 3 X 5 1/8

1100000 500C115U6R3DF2D 2.4 51.3 3 X 5 5/81100000 500C115U6R3FC2D 3.0 46.4 3 1/2 X 4 1/81100000 500C115U6R3FD2D 2.6 51.0 3 1/2 X 4 5/81200000 500C125U6R3DP2D 2.4 52.0 3 X 5 7/81400000 500C145U6R3FE2D 2.4 55.4 3 1/2 X 5 1/81600000 500C165U6R3FF2D 2.4 56.1 3 1/2 X 5 5/81600000 500C165U6R3DN2D 2.6 55.9 3 X 7 5/81700000 500C175U6R3FP2D 2.4 57.0 3 1/2 X 5 7/81800000 500C185U6R3DG2D 2.4 58.6 3 X 8 5/82300000 500C235U6R3FN2D 2.4 61.7 3 1/2 X 7 5/82600000 500C265U6R3FG2D 2.4 64.4 3 1/2 X 8 5/8

10 Vdc (12 Vdc Surge)22000 500C223U010AK2B 46.9 4.7 1 3/8 X 1 5/839000 500C393U010AA2B 26.5 6.9 1 3/8 X 2 1/852000 500C523U010AH2B 20.1 8.6 1 3/8 X 2 5/870000 500C703U010AB2B 15.5 10.5 1 3/8 X 3 1/871000 500C713U010EA2B 18.8 9.6 1 3/4 X 2 1/887000 500C873U010AJ2B 12.8 12.1 1 3/8 X 3 5/895000 500C953U010EH2B 14.3 11.8 1 3/4 X 2 5/8

100000 500C104U010AC2B 11.0 13.7 1 3/8 X 4 1/8100000 500C104U010BA2B 17.6 10.7 2 X 2 1/8120000 500C124U010AD2B 9.8 15.2 1 3/8 X 4 5/8130000 500C134U010EB2B 11.0 14.3 1 3/4 X 3 1/8130000 500C134U010BH2B 13.4 13.3 2 X 2 5/8140000 500C144U010AE2B 8.9 16.5 1 3/8 X 5 1/8160000 500C164U010AF2B 8.3 17.8 1 3/8 X 5 5/8160000 500C164U010EJ2B 9.1 16.6 1 3/4 X 3 5/8160000 500C164U010BB2B 10.5 16.0 2 X 3 1/8190000 500C194U010EC2B 7.9 18.7 1 3/4 X 4 1/8200000 500C204U010BJ2B 8.7 18.5 2 X 3 5/8200000 500C204U010CH2B 8.8 18.9 2 1/2 X 2 5/8220000 500C224U010ED2B 7.0 20.6 1 3/4 X 4 5/8240000 500C244U010BC2B 7.5 20.8 2 X 4 1/8250000 500C254U010EE2B 6.4 22.4 1 3/4 X 5 1/8







Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings


270000 500C274U010CB2B 6.7 22.9 2 1/2 X 3 1/8280000 500C284U010EF2B 6.0 24.0 1 3/4 X 5 5/8280000 500C284U010BD2B 6.7 22.9 2 X 4 5/8320000 500C324U010BE2B 6.1 24.8 2 X 5 1/8340000 500C344U010CJ2B 5.5 26.5 2 1/2 X 3 5/8360000 500C364U010BF2B 5.7 26.5 2 X 5 5/8400000 500C404U010DB2D 4.1 32.9 3 X 3 1/8410000 500C414U010CC2B 4.8 29.6 2 1/2 X 4 1/8480000 500C484U010CD2D 4.3 32.6 2 1/2 X 4 5/8500000 500C504U010DJ2D 3.3 38.2 3 X 3 5/8550000 500C554U010CE2D 3.9 35.3 2 1/2 X 5 1/8600000 500C604U010DC2D 2.9 42.5 3 X 4 1/8610000 500C614U010CF2D 3.6 37.9 2 1/2 X 5 5/8700000 500C704U010DD2D 2.6 46.7 3 X 4 5/8800000 500C804U010DE2D 2.4 50.6 3 X 5 1/8830000 500C834U010FC2D 2.9 47.3 3 1/2 X 4 1/8870000 500C874U010DF2D 2.3 53.0 3 X 5 5/8930000 500C934U010DP2D 2.3 53.3 3 X 5 7/8970000 500C974U010FD2D 2.8 49.6 3 1/2 X 4 5/8

1100000 500C115U010FE2D 2.5 54.5 3 1/2 X 5 1/81200000 500C125U010FF2D 2.2 59.0 3 1/2 X 5 5/81300000 500C135U010FP2D 2.1 60.8 3 1/2 X 5 7/81300000 500C135U010DN2D 2.1 60.1 3 X 7 5/81500000 500C155U010DG2D 2.1 63.7 3 X 8 5/81700000 500C175U010FN2D 1.8 73.4 3 1/2 X 7 5/82000000 500C205U010FG2D 1.5 80.5 3 1/2 X 8 5/8

16 Vdc (20 Vdc Surge)15000 500C153U016AK2B 46.9 4.7 1 3/8 X 1 5/827000 500C273U016AA2B 26.5 6.9 1 3/8 X 2 1/836000 500C363U016AH2B 20.1 8.6 1 3/8 X 2 5/848000 500C483U016AB2B 15.5 10.5 1 3/8 X 3 1/849000 500C493U016EA2B 18.8 9.6 1 3/4 X 2 1/861000 500C613U016AJ2B 12.8 12.1 1 3/8 X 3 5/866000 500C663U016EH2B 15.3 11.4 1 3/4 X 2 5/871000 500C713U016BA2B 17.6 10.7 2 X 2 1/873000 500C733U016AC2B 11.0 13.7 1 3/8 X 4 1/885000 500C853U016AD2B 9.8 15.2 1 3/8 X 4 5/888000 500C883U016EB2B 12.5 13.5 1 3/4 X 3 1/890000 500C903U016BH2B 13.4 13.3 2 X 2 5/897000 500C973U016AE2B 8.9 16.5 1 3/8 X 5 1/8

110000 500C114U016AF2B 8.3 17.8 1 3/8 X 5 5/8110000 500C114U016EJ2B 10.9 15.2 1 3/4 X 3 5/8110000 500C114U016BB2B 10.5 16.0 2 X 3 1/8130000 500C134U016EC2B 9.7 16.9 1 3/4 X 4 1/8140000 500C144U016BJ2B 8.7 18.5 2 X 3 5/8140000 500C144U016CH2B 8.8 18.9 2 1/2 X 2 5/8150000 500C154U016ED2B 8.8 18.5 1 3/4 X 4 5/8170000 500C174U016BC2B 7.5 20.8 2 X 4 1/8180000 500C184U016EE2B 8.2 19.9 1 3/4 X 5 1/8190000 500C194U016CB2B 6.7 22.9 2 1/2 X 3 1/8200000 500C204U016EF2B 7.8 21.1 1 3/4 X 5 5/8200000 500C204U016BD2B 6.7 22.9 2 X 4 5/8220000 500C224U016BE2B 6.1 24.8 2 X 5 1/8230000 500C234U016CJ2B 5.5 26.5 2 1/2 X 3 5/8250000 500C254U016BF2B 5.7 26.5 2 X 5 5/8280000 500C284U016CC2B 5.0 29.2 2 1/2 X 4 1/8280000 500C284U016DB2D 4.2 32.4 3 X 3 1/8320000 500C324U016CD2D 4.6 31.4 2 1/2 X 4 5/8

350000 500C354U016DJ2D 3.6 36.8 3 X 3 5/8370000 500C374U016CE2D 4.4 33.4 2 1/2 X 5 1/8420000 500C424U016CF2D 4.2 35.2 2 1/2 X 5 5/8420000 500C424U016DC2D 3.3 40.2 3 X 4 1/8490000 500C494U016DD2D 3.1 42.8 3 X 4 5/8550000 500C554U016DE2D 2.8 46.2 3 X 5 1/8600000 500C604U016FC2D 2.9 47.3 3 1/2 X 4 1/8610000 500C614U016DF2D 2.8 48.1 3 X 5 5/8640000 500C644U016DP2D 2.8 48.8 3 X 5 7/8700000 500C704U016FD2D 2.8 49.7 3 1/2 X 4 5/8800000 500C804U016FE2D 2.5 54.4 3 1/2 X 5 1/8870000 500C874U016FF2D 2.4 56.7 3 1/2 X 5 5/8870000 500C874U016DN2D 2.6 54.1 3 X 7 5/8920000 500C924U016FP2D 2.4 57.3 3 1/2 X 5 7/8

1000000 500C105U016DG2D 2.6 57.1 3 X 8 5/81300000 500C135U016FN2D 2.3 63.1 3 1/2 X 7 5/81500000 500C155U016FG2D 2.3 66.4 3 1/2 X 8 5/8

25 Vdc (30 Vdc Surge)11000 500C113U025AK2B 37.1 5.3 1 3/8 X 1 5/818000 500C183U025AA2B 23.6 7.4 1 3/8 X 2 1/826000 500C263U025AH2B 16.9 9.4 1 3/8 X 2 5/833000 500C333U025EA2B 21.8 8.9 1 3/4 X 2 1/834000 500C343U025AB2B 17.1 10.0 1 3/8 X 3 1/839000 500C393U025EH2B 19.4 10.2 1 3/4 X 2 5/843000 500C433U025AJ2B 17.7 10.3 1 3/8 X 3 5/847000 500C473U025BA2B 21.8 9.7 2 X 2 1/851000 500C513U025AC2B 16.3 11.3 1 3/8 X 4 1/853000 500C533U025BH2B 16.5 12.0 2 X 2 5/854000 500C543U025EB2B 15.2 12.2 1 3/4 X 3 1/860000 500C603U025AD2B 15.4 12.1 1 3/8 X 4 5/869000 500C693U025AE2B 14.4 13.0 1 3/8 X 5 1/869000 500C693U025BB2B 12.2 14.8 2 X 3 1/870000 500C703U025EJ2B 12.8 14.1 1 3/4 X 3 5/877000 500C773U025AF2B 13.4 14.0 1 3/8 X 5 5/882000 500C823U025CH2B 9.5 18.1 2 1/2 X 2 5/886000 500C863U025EC2B 11.2 15.7 1 3/4 X 4 1/889000 500C893U025BJ2B 9.8 17.4 2 X 3 5/8

100000 500C104U025ED2B 10.2 17.1 1 3/4 X 4 5/8110000 500C114U025BC2B 8.3 19.7 2 X 4 1/8110000 500C114U025CB2B 7.6 21.5 2 1/2 X 3 1/8120000 500C124U025EE2B 9.6 18.4 1 3/4 X 5 1/8130000 500C134U025EF2B 9.1 19.5 1 3/4 X 5 5/8130000 500C134U025BD2B 7.3 21.9 2 X 4 5/8150000 500C154U025BE2B 6.6 23.9 2 X 5 1/8150000 500C154U025CJ2B 6.4 24.6 2 1/2 X 3 5/8170000 500C174U025BF2B 6.1 25.7 2 X 5 5/8170000 500C174U025DB2B 5.0 29.7 3 X 3 1/8180000 500C184U025CC2B 5.8 27.0 2 1/2 X 4 1/8210000 500C214U025CD2B 5.2 29.5 2 1/2 X 4 5/8220000 500C224U025DJ2D 4.3 33.6 3 X 3 5/8250000 500C254U025CE2D 5.0 31.1 2 1/2 X 5 1/8270000 500C274U025DC2D 3.9 36.9 3 X 4 1/8280000 500C284U025CF2D 4.6 33.7 2 1/2 X 5 5/8320000 500C324U025DD2D 3.5 40.0 3 X 4 5/8370000 500C374U025DE2D 3.3 42.7 3 X 5 1/8390000 500C394U025FC2D 3.8 40.9 3 1/2 X 4 1/8420000 500C424U025DF2D 3.2 44.9 3 X 5 5/8440000 500C444U025DP2D 3.1 46.5 3 X 5 7/8





Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


460000 500C464U025FD2D 3.5 44.4 3 1/2 X 4 5/8530000 500C534U025FE2D 3.2 47.4 3 1/2 X 5 1/8600000 500C604U025FF2D 3.1 50.2 3 1/2 X 5 5/8610000 500C614U025DN2D 3.1 50.2 3 X 7 5/8630000 500C634U025FP2D 2.9 51.8 3 1/2 X 5 7/8710000 500C714U025DG2D 3.0 52.8 3 X 8 5/8870000 500C874U025FN2D 3.0 55.6 3 1/2 X 7 5/8

1000000 500C105U025FG2D 2.9 58.3 3 1/2 X 8 5/835 Vdc (40 Vdc Surge)

6600 500C662U035AK2B 41.7 5.0 1 3/8 X 1 5/811000 500C113U035AA2B 26.7 6.9 1 3/8 X 2 1/816000 500C163U035AH2B 19.5 8.7 1 3/8 X 2 5/820000 500C203U035EA2B 22.3 8.8 1 3/4 X 2 1/821000 500C213U035AB2B 19.4 9.3 1 3/8 X 3 1/824000 500C243U035EH2B 19.2 10.2 1 3/4 X 2 5/826000 500C263U035AJ2B 19.7 9.8 1 3/8 X 3 5/826000 500C263U035BA2B 24.5 9.1 2 X 2 1/832000 500C323U035AC2B 18.7 10.5 1 3/8 X 4 1/833000 500C333U035BH2B 20.1 10.8 2 X 2 5/834000 500C343U035EB2B 15.5 12.1 1 3/4 X 3 1/837000 500C373U035AD2B 16.7 11.6 1 3/8 X 4 5/842000 500C423U035AE2B 14.8 12.9 1 3/8 X 5 1/843000 500C433U035EJ2B 13.2 13.8 1 3/4 X 3 5/843000 500C433U035BB2B 15.9 13.0 2 X 3 1/848000 500C483U035AF2B 13.5 14.0 1 3/8 X 5 5/851000 500C513U035CH2B 14.8 14.5 2 1/2 X 2 5/853000 500C533U035EC2B 11.8 15.3 1 3/4 X 4 1/855000 500C553U035BJ2B 13.2 15.0 2 X 3 5/862000 500C623U035ED2B 10.6 16.8 1 3/4 X 4 5/867000 500C673U035BC2B 11.6 16.7 2 X 4 1/871000 500C713U035CB2B 11.5 17.5 2 1/2 X 3 1/872000 500C723U035EE2B 9.8 18.2 1 3/4 X 5 1/880000 500C803U035BD2B 10.5 18.2 2 X 4 5/882000 500C823U035EF2B 9.4 19.2 1 3/4 X 5 5/891000 500C913U035CJ2B 9.4 20.3 2 1/2 X 3 5/892000 500C923U035BE2B 9.8 19.5 2 X 5 1/8

100000 500C104U035BF2B 9.4 20.7 2 X 5 5/8110000 500C114U035CC2B 8.2 22.6 2 1/2 X 4 1/8110000 500C114U035DB2B 6.9 25.3 3 X 3 1/8130000 500C134U035CD2B 7.4 24.8 2 1/2 X 4 5/8140000 500C144U035DJ2B 5.7 29.1 3 X 3 5/8150000 500C154U035CE2B 6.8 26.8 2 1/2 X 5 1/8170000 500C174U035CF2B 6.1 29.2 2 1/2 X 5 5/8170000 500C174U035DC2D 5.2 32.0 3 X 4 1/8200000 500C204U035DD2D 4.7 34.8 3 X 4 5/8230000 500C234U035DE2D 4.4 37.2 3 X 5 1/8240000 500C244U035FC2D 4.9 36.0 3 1/2 X 4 1/8260000 500C264U035DF2D 4.0 39.9 3 X 5 5/8270000 500C274U035DP2D 3.9 41.3 3 X 5 7/8280000 500C284U035FD2D 4.5 39.0 3 1/2 X 4 5/8330000 500C334U035FE2D 4.0 42.6 3 1/2 X 5 1/8370000 500C374U035FF2D 3.6 46.0 3 1/2 X 5 5/8380000 500C384U035DN2D 3.8 45.3 3 X 7 5/8390000 500C394U035FP2D 3.5 47.5 3 1/2 X 5 7/8440000 500C444U035DG2D 3.6 48.1 3 X 8 5/8540000 500C544U035FN2D 3.4 52.1 3 1/2 X 7 5/8630000 500C634U035FG2D 3.3 55.2 3 1/2 X 8 5/8

50 Vdc (65 Vdc Surge)4500 500C452U050AK2B 47.9 4.7 1 3/8 X 1 5/87600 500C762U050AA2B 30.9 6.4 1 3/8 X 2 1/8

11000 500C113U050AH2B 21.8 8.3 1 3/8 X 2 5/814000 500C143U050AB2B 20.9 9.0 1 3/8 X 3 1/814000 500C143U050EA2B 22.8 8.7 1 3/4 X 2 1/816000 500C163U050EH2B 20.2 10.0 1 3/4 X 2 5/817000 500C173U050BA2B 25.3 9.0 2 X 2 1/818000 500C183U050AJ2B 17.8 10.3 1 3/8 X 3 5/821000 500C213U050AC2B 17.3 11.0 1 3/8 X 4 1/822000 500C223U050BH2B 20.8 10.7 2 X 2 5/823000 500C233U050EB2B 15.6 12.1 1 3/4 X 3 1/825000 500C253U050AD2B 16.8 11.6 1 3/8 X 4 5/829000 500C293U050AE2B 15.1 12.7 1 3/8 X 5 1/829000 500C293U050EJ2B 13.5 13.6 1 3/4 X 3 5/829000 500C293U050BB2B 16.3 12.8 2 X 3 1/832000 500C323U050AF2B 13.8 13.8 1 3/8 X 5 5/834000 500C343U050CH2B 15.1 14.4 2 1/2 X 2 5/836000 500C363U050EC2B 12.0 15.2 1 3/4 X 4 1/837000 500C373U050BJ2B 13.6 14.8 2 X 3 5/842000 500C423U050ED2B 10.8 16.6 1 3/4 X 4 5/846000 500C463U050BC2B 11.9 16.5 2 X 4 1/848000 500C483U050CB2B 12.0 17.1 2 1/2 X 3 1/849000 500C493U050EE2B 9.8 18.1 1 3/4 X 5 1/854000 500C543U050BD2B 10.8 18.0 2 X 4 5/855000 500C553U050EF2B 9.5 19.1 1 3/4 X 5 5/862000 500C623U050BE2B 10.0 19.4 2 X 5 1/862000 500C623U050CJ2B 10.3 19.4 2 1/2 X 3 5/870000 500C703U050BF2B 9.5 20.5 2 X 5 5/872000 500C723U050DB2B 9.1 22.0 3 X 3 1/875000 500C753U050CC2B 8.9 21.8 2 1/2 X 4 1/889000 500C893U050CD2B 7.9 24.0 2 1/2 X 4 5/892000 500C923U050DJ2B 7.7 25.1 3 X 3 5/8

100000 500C104U050CE2B 7.2 26.0 2 1/2 X 5 1/8110000 500C114U050DC2B 6.9 27.6 3 X 4 1/8120000 500C124U050CF2B 6.7 27.9 2 1/2 X 5 5/8130000 500C134U050DD2D 6.1 30.4 3 X 4 5/8150000 500C154U050DE2D 5.9 32.0 3 X 5 1/8150000 500C154U050FC2D 6.4 31.7 3 1/2 X 4 1/8170000 500C174U050DF2D 5.6 33.8 3 X 5 5/8180000 500C184U050DP2D 5.4 35.0 3 X 5 7/8180000 500C184U050FD2D 5.7 34.7 3 1/2 X 4 5/8200000 500C204U050FE2D 5.4 36.8 3 1/2 X 5 1/8230000 500C234U050FF2D 5 39 3 1/2 X 5 5/8250000 500C254U050FP2D 5 40 3 1/2 X 5 7/8260000 500C264U050DN2D 5 42 3 X 7 5/8300000 500C304U050DG2D 4 45 3 X 8 5/8340000 500C344U050FN2D 4 47 3 1/2 X 7 5/8400000 500C404U050FG2D 4 51 3 1/2 X 8 5/8

63 Vdc (75 Vdc Surge)3400 500C342U063AK2B 60.6 4.1 1 3/8 X 1 5/85800 500C582U063AA2B 39.0 5.7 1 3/8 X 2 1/88200 500C822U063AH2B 27.4 7.4 1 3/8 X 2 5/8

11000 500C113U063AB2B 25.2 8.2 1 3/8 X 3 1/811000 500C113U063EA2B 27.9 7.9 1 3/4 X 2 1/812000 500C123U063EH2B 25.6 8.8 1 3/4 X 2 5/813000 500C133U063BA2B 28.0 8.5 2 X 2 1/8





Ratings


Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


14000 500C143U063AJ2B 23.7 8.9 1 3/8 X 3 5/815000 500C153U063BH2B 22.6 10.2 2 X 2 5/816000 500C163U063AC2B 20.4 10.1 1 3/8 X 4 1/817000 500C173U063EB2B 19.5 10.8 1 3/4 X 3 1/819000 500C193U063AD2B 18.1 11.2 1 3/8 X 4 5/820000 500C203U063BB2B 18.1 12.1 2 X 3 1/822000 500C223U063AE2B 16.4 12.2 1 3/8 X 5 1/822000 500C223U063EJ2B 16.2 12.5 1 3/4 X 3 5/824000 500C243U063CH2B 26.8 10.8 2 1/2 X 2 5/825000 500C253U063AF2B 15.1 13.2 1 3/8 X 5 5/826000 500C263U063BJ2B 15.1 14.0 2 X 3 5/827000 500C273U063EC2B 14.2 14.0 1 3/4 X 4 1/832000 500C323U063ED2B 12.8 15.3 1 3/4 X 4 5/832000 500C323U063BC2B 13.3 15.6 2 X 4 1/834000 500C343U063CB2B 19.3 13.5 2 1/2 X 3 1/837000 500C373U063EE2B 11.8 16.5 1 3/4 X 5 1/838000 500C383U063BD2B 12.1 17.0 2 X 4 5/842000 500C423U063EF2B 11.2 17.6 1 3/4 X 5 5/843000 500C433U063CJ2B 17.1 15.1 2 1/2 X 3 5/844000 500C443U063BE2B 11.3 18.3 2 X 5 1/849000 500C493U063BF2B 10.7 19.4 2 X 5 5/850000 500C503U063DB2B 14.9 17.2 3 X 3 1/853000 500C533U063CC2B 13.7 17.5 2 1/2 X 4 1/862000 500C623U063CD2B 11.8 19.6 2 1/2 X 4 5/865000 500C653U063DJ2B 12.1 20.0 3 X 3 5/872000 500C723U063CE2B 11.0 21.1 2 1/2 X 5 1/879000 500C793U063DC2B 10.8 22.1 3 X 4 1/882000 500C823U063CF2B 10.5 22.3 2 1/2 X 5 5/893000 500C933U063DD2B 9.9 23.9 3 X 4 5/8

110000 500C114U063DE2B 8.8 26.3 3 X 5 1/8110000 500C114U063FC2B 9.9 25.4 3 1/2 X 4 1/8120000 500C124U063DF2B 7.9 28.5 3 X 5 5/8130000 500C134U063DP2B 7.5 29.6 3 X 5 7/8130000 500C134U063FD2B 9.0 27.6 3 1/2 X 4 5/8150000 500C154U063FE2D 7.9 30.3 3 1/2 X 5 1/8170000 500C174U063FF2D 7.2 32.8 3 1/2 X 5 5/8180000 500C184U063DN2D 6.5 35.0 3 X 7 5/8180000 500C184U063FP2D 6.8 34.0 3 1/2 X 5 7/8210000 500C214U063DG2D 5.7 38.3 3 X 8 5/8250000 500C254U063FN2D 5.8 40.2 3 1/2 X 7 5/8290000 500C294U063FG2D 5.2 43.9 3 1/2 X 8 5/8

75 Vdc (95 Vdc Surge)2700 500C272U075AK2B 76.2 3.7 1 3/8 X 1 5/84300 500C432U075AA2B 50.7 5.0 1 3/8 X 2 1/86400 500C642U075AH2B 35.0 6.5 1 3/8 X 2 5/88300 500C832U075EA2B 55.6 5.6 1 3/4 X 2 1/88600 500C862U075AB2B 34.0 7.1 1 3/8 X 3 1/89800 500C982U075EH2B 47.3 6.5 1 3/4 X 2 5/8

10000 500C103U075BA2B 34.8 7.7 2 X 2 1/811000 500C113U075AJ2B 31.1 7.8 1 3/8 X 3 5/811000 500C113U075BH2B 27.5 9.3 2 X 2 5/813000 500C133U075AC2B 28.2 8.6 1 3/8 X 4 1/814000 500C143U075EB2B 34.1 8.2 1 3/4 X 3 1/815000 500C153U075AD2B 24.5 9.6 1 3/8 X 4 5/816000 500C163U075BB2B 21.4 11.2 2 X 3 1/817000 500C173U075AE2B 22.5 10.4 1 3/8 X 5 1/818000 500C183U075EJ2B 26.9 9.7 1 3/4 X 3 5/819000 500C193U075AF2B 20.4 11.3 1 3/8 X 5 5/8

19000 500C193U075CH2B 30.0 10.2 2 1/2 X 2 5/821000 500C213U075EC2B 22.3 11.1 1 3/4 X 4 1/821000 500C213U075BJ2B 18.0 12.8 2 X 3 5/825000 500C253U075ED2B 19.2 12.5 1 3/4 X 4 5/825000 500C253U075BC2B 15.6 14.4 2 X 4 1/826000 500C263U075CB2B 21.6 12.7 2 1/2 X 3 1/829000 500C293U075EE2B 16.9 13.8 1 3/4 X 5 1/830000 500C303U075BD2B 13.9 15.8 2 X 4 5/833000 500C333U075EF2B 15.2 15.1 1 3/4 X 5 5/834000 500C343U075BE2B 12.8 17.1 2 X 5 1/834000 500C343U075CJ2B 17.8 14.8 2 1/2 X 3 5/839000 500C393U075BF2B 12.0 18.3 2 X 5 5/840000 500C403U075DB2B 18.0 15.6 3 X 3 1/842000 500C423U075CC2B 15.1 16.7 2 1/2 X 4 1/849000 500C493U075CD2B 13.5 18.4 2 1/2 X 4 5/851000 500C513U075DJ2B 14.4 18.3 3 X 3 5/857000 500C573U075CE2B 12.0 20.2 2 1/2 X 5 1/862000 500C623U075DC2B 12.9 20.2 3 X 4 1/864000 500C643U075CF2B 11.2 21.5 2 1/2 X 5 5/874000 500C743U075DD2B 11.8 21.9 3 X 4 5/885000 500C853U075DE2B 10.4 24.1 3 X 5 1/885000 500C853U075FC2B 11.8 23.2 3 1/2 X 4 1/896000 500C963U075DF2B 9.4 26.2 3 X 5 5/8

100000 500C104U075DP2B 8.9 27.2 3 X 5 7/8100000 500C104U075FD2B 10.7 25.3 3 1/2 X 4 5/8120000 500C124U075FE2B 9.4 27.8 3 1/2 X 5 1/8130000 500C134U075FF2D 8.4 30.2 3 1/2 X 5 5/8140000 500C144U075DN2D 7.7 32.1 3 X 7 5/8140000 500C144U075FP2D 8.1 31.3 3 1/2 X 5 7/8160000 500C164U075DG2D 6.8 35.1 3 X 8 5/8190000 500C194U075FN2D 6.9 36.8 3 1/2 X 7 5/8220000 500C224U075FG2D 6.2 40.2 3 1/2 X 8 5/8

100 Vdc (125 Vdc Surge)1600 500C162U100AK2B 98.4 3.3 1 3/8 X 1 5/82500 500C252U100AA2B 60.2 4.6 1 3/8 X 2 1/83800 500C382U100AH2B 42.7 5.9 1 3/8 X 2 5/84900 500C492U100EA2B 62.0 5.3 1 3/4 X 2 1/85100 500C512U100AB2B 38.2 6.7 1 3/8 X 3 1/85100 500C512U100BA2B 51.8 6.3 2 X 2 1/85800 500C582U100EH2B 52.8 6.2 1 3/4 X 2 5/86300 500C632U100AJ2B 33.0 7.6 1 3/8 X 3 5/87300 500C732U100BH2B 37.8 7.9 2 X 2 5/87600 500C762U100AC2B 30.7 8.2 1 3/8 X 4 1/88100 500C812U100EB2B 38.0 7.7 1 3/4 X 3 1/88900 500C892U100AD2B 29.0 8.8 1 3/8 X 4 5/8

10000 500C103U100AE2B 28.3 9.3 1 3/8 X 5 1/810000 500C103U100EJ2B 29.9 9.2 1 3/4 X 3 5/810000 500C103U100BB2B 30.6 9.3 2 X 3 1/811000 500C113U100AF2B 27.6 9.7 1 3/8 X 5 5/812000 500C123U100CH2B 33.7 9.6 2 1/2 X 2 5/813000 500C133U100EC2B 24.8 10.6 1 3/4 X 4 1/813000 500C133U100BJ2B 22.3 11.5 2 X 3 5/815000 500C153U100ED2B 21.2 11.9 1 3/4 X 4 5/816000 500C163U100BC2B 19.9 12.8 2 X 4 1/817000 500C173U100EE2B 18.7 13.1 1 3/4 X 5 1/817000 500C173U100CB2B 23.4 12.3 2 1/2 X 3 1/819000 500C193U100BD2B 17.7 14.1 2 X 4 5/820000 500C203U100EF2B 16.8 14.3 1 3/4 X 5 5/8





Ratings


Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


18000 500C183T160DC2B 9.6 23.4 3 X 4 1/819000 500C193T160CF2B 9.6 23.2 2 1/2 X 5 5/821000 500C213T160DD2B 8.2 26.2 3 X 4 5/825000 500C253T160DE2B 7.3 28.9 3 X 5 1/825000 500C253T160FC2B 9.2 26.4 3 1/2 X 4 1/828000 500C283T160DF2D 6.5 31.4 3 X 5 5/829000 500C293T160DP2D 6.2 32.6 3 X 5 7/829000 500C293T160FD2B 7.9 29.5 3 1/2 X 4 5/834000 500C343T160FE2D 6.9 32.4 3 1/2 X 5 1/838000 500C383T160FF2D 6.2 35.1 3 1/2 X 5 5/840000 500C403T160FP2D 5.9 36.5 3 1/2 X 5 7/841000 500C413T160DN2D 5.1 39.8 3 X 7 5/847000 500C473T160DG2D 4.3 44.0 3 X 8 5/856000 500C563T160FN2D 4.9 44.3 3 1/2 X 7 5/865000 500C653T160FG2D 4.2 48.8 3 1/2 X 8 5/8

200 Vdc (250 Vdc Surge)540 500C541T200AK2B 206 2.3 1 3/8 X 1 5/8770 500C771T200AA2B 140 3.0 1 3/8 X 2 1/8970 500C971T200AH2B 101 3.9 1 3/8 X 2 5/8

1400 500C142T200AB2B 78.5 4.6 1 3/8 X 3 1/81500 500C152T200EA2B 79.1 4.7 1 3/4 X 2 1/81600 500C162T200BA2B 82.0 5.0 2 X 2 1/81700 500C172T200AJ2B 63.9 5.4 1 3/8 X 3 5/81700 500C172T200EH2B 62.5 5.7 1 3/4 X 2 5/82100 500C212T200AC2B 51.7 6.3 1 3/8 X 4 1/82200 500C222T200BH2B 61.0 6.2 2 X 2 5/82400 500C242T200EB2B 48.4 6.9 1 3/4 X 3 1/82500 500C252T200AD2B 43.2 7.2 1 3/8 X 4 5/82900 500C292T200AE2B 37.8 8.0 1 3/8 X 5 1/83100 500C312T200EJ2B 37.9 8.2 1 3/4 X 3 5/83100 500C312T200BB2B 46.1 7.6 2 X 3 1/83300 500C332T200AF2B 33.4 8.9 1 3/8 X 5 5/83500 500C352T200CH2B 42.2 8.6 2 1/2 X 2 5/83800 500C382T200EC2B 31.3 9.4 1 3/4 X 4 1/84000 500C402T200BJ2B 36.2 9.0 2 X 3 5/84500 500C452T200ED2B 26.8 10.6 1 3/4 X 4 5/84900 500C492T200BC2B 28.5 10.6 2 X 4 1/84900 500C492T200CB2B 31.2 10.6 2 1/2 X 3 1/85200 500C522T200EE2B 23.5 11.7 1 3/4 X 5 1/85800 500C582T200BD2B 24.4 12.0 2 X 4 5/85900 500C592T200EF2B 21.0 12.8 1 3/4 X 5 5/86200 500C622T200CJ2B 22.3 13.2 2 1/2 X 3 5/86700 500C672T200BE2B 21.7 13.2 2 X 5 1/87600 500C762T200BF2B 19.6 14.3 2 X 5 5/87600 500C762T200CC2B 20.3 14.4 2 1/2 X 4 1/87600 500C762T200DB2B 30.3 12.1 3 X 3 1/89000 500C902T200CD2B 17.3 16.2 2 1/2 X 4 5/89800 500C982T200DJ2B 23.7 14.3 3 X 3 5/8

10000 500C103T200CE2B 15.8 17.6 2 1/2 X 5 1/812000 500C123T200CF2B 13.7 19.4 2 1/2 X 5 5/812000 500C123T200DC2B 19.7 16.3 3 X 4 1/814000 500C143T200DD2B 16.9 18.3 3 X 4 5/815000 500C153T200FC2B 17.1 19.3 3 1/2 X 4 1/816000 500C163T200FG2B 14.8 20.2 3 X 5 1/818000 500C183T200DF2B 13.3 22.0 3 X 5 5/819000 500C193T200DP2B 15.3 20.7 3 X 5 7/820000 500C203T200FD2B 12.7 23.3 3 1/2 X 4 5/8

22000 500C223U100BE2B 15.6 15.5 2 X 5 1/822000 500C223U100CJ2B 19.1 14.3 2 1/2 X 3 5/825000 500C253U100BF2B 14.9 16.4 2 X 5 5/825000 500C253U100DB2B 19.9 14.9 3 X 3 1/827000 500C273U100CC2B 16.5 16.0 2 1/2 X 4 1/832000 500C323U100CD2B 14.7 17.6 2 1/2 X 4 5/833000 500C333U100DJ2B 16.4 17.2 3 X 3 5/836000 500C363U100CE2B 13.4 19.1 2 1/2 X 5 1/840000 500C403U100DC2B 14.4 19.1 3 X 4 1/841000 500C413U100CF2B 12.5 20.4 2 1/2 X 5 5/847000 500C473U100DD2B 13.0 20.9 3 X 4 5/854000 500C543U100DE2B 12.0 22.5 3 X 5 1/855000 500C553U100FC2B 13.4 21.8 3 1/2 X 4 1/862000 500C623U100DF2B 11.2 23.9 3 X 5 5/865000 500C653U100DP2B 11.1 24.4 3 X 5 7/865000 500C653U100FD2B 12.1 23.8 3 1/2 X 4 5/874000 500C743U100FE2B 10.9 25.9 3 1/2 X 5 1/884000 500C843U100FF2B 10.2 27.5 3 1/2 X 5 5/889000 500C893U100FP2B 10.0 28.1 3 1/2 X 5 7/894000 500C943U100DN2D 9.2 29.4 3 X 7 5/8

110000 500C114U100DG2D 8.2 32.1 3 X 8 5/8120000 500C124U100FN2D 8.3 33.7 3 1/2 X 7 5/8140000 500C144U100FG2D 7.3 36.8 3 1/2 X 8 5/8

160 Vdc (200 Vdc)750 500C751T160AK2B 150 2.6 1 3/8 X 1 5/8

1200 500C122T160AA2B 93.0 3.7 1 3/8 X 2 1/81500 500C152T160AH2B 70.5 4.6 1 3/8 X 2 5/82100 500C212T160AB2B 58.5 5.4 1 3/8 X 3 1/82300 500C232T160EA2B 62.0 5.3 1 3/4 X 2 1/82400 500C242T160BA2B 70.5 5.4 2 X 2 1/82700 500C272T160AJ2B 50.2 6.1 1 3/8 X 3 5/82700 500C272T160EH2B 52.8 6.2 1 3/4 X 2 5/83300 500C332T160AC2B 42.9 7.0 1 3/8 X 4 1/83500 500C352T160BH2B 46.5 7.1 2 X 2 5/83800 500C382T160EB2B 38.0 7.7 1 3/4 X 3 1/83900 500C392T160AD2B 37.7 7.7 1 3/8 X 4 5/84500 500C452T160AE2B 34.7 8.4 1 3/8 X 5 1/84900 500C492T160EJ2B 29.9 9.2 1 3/4 X 3 5/84900 500C492T160BB2B 33.5 8.9 2 X 3 1/85100 500C512T160AF2B 32.2 9.0 1 3/8 X 5 5/85500 500C552T160CH2B 30.1 10.2 2 1/2 X 2 5/86000 500C602T160EC2B 24.8 10.6 1 3/4 X 4 1/86300 500C632T160BJ2B 26.4 10.6 2 X 3 5/87100 500C712T160ED2B 21.2 11.9 1 3/4 X 4 5/87700 500C772T160BC2B 21.9 12.2 2 X 4 1/87700 500C772T160CB2B 21.3 12.8 2 1/2 X 3 1/88200 500C822T160EE2B 18.7 13.1 1 3/4 X 5 1/89100 500C912T160BD2B 18.8 13.6 2 X 4 5/89300 500C932T160EF2B 16.8 14.3 1 3/4 X 5 5/89900 500C992T160CJ2B 17.0 15.1 2 1/2 X 3 5/8

10000 500C103T160BE2B 16.6 15.0 2 X 5 1/811000 500C113T160DB2B 14.7 17.3 3 X 3 1/812000 500C123T160BF2B 14.9 16.4 2 X 5 5/812000 500C123T160CC2B 14.1 17.3 2 1/2 X 4 1/814000 500C143T160CD2B 11.9 19.6 2 1/2 X 4 5/815000 500C153T160DJ2B 11.5 20.5 3 X 3 5/816000 500C163T160CE2B 10.7 21.3 2 1/2 X 5 1/8





Ratings


Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


21000 500C213T200FE2B 13.4 23.3 3 1/2 X 5 1/824000 500C243T200FF2B 12.0 25.3 3 1/2 X 5 5/825000 500C253T200FP2B 11.5 26.3 3 1/2 X 5 7/826000 500C263T200DN2B 11.7 26.4 3 X 7 5/831000 500C313T200DG2B 9.6 29.6 3 X 8 5/835000 500C353T200FN2D 9.3 32.1 3 1/2 X 7 5/840000 500C403T200FG2D 7.9 35.5 3 1/2 X 8 5/8


1100 500C112T250AB2B 87.5 4.4 1 3/8 X 3 1/81100 500C112T250EA2B 99.1 4.2 1 3/4 X 2 1/81200 500C122T250BA2B 94.6 4.6 2 X 2 1/81300 500C132T250EH2B 82.8 4.9 1 3/4 X 2 5/81400 500C142T250AJ2B 69.5 5.2 1 3/8 X 3 5/81700 500C172T250AC2B 57.8 6.0 1 3/8 X 4 1/81700 500C172T250BH2B 65.7 6.0 2 X 2 5/81800 500C182T250EB2B 61.1 6.1 1 3/4 X 3 1/82000 500C202T250AD2B 51.5 6.6 1 3/8 X 4 5/82300 500C232T250AE2B 44.1 7.4 1 3/8 X 5 1/82300 500C232T250EJ2B 48.5 7.2 1 3/4 X 3 5/82400 500C242T250BB2B 46.2 7.6 2 X 3 1/82600 500C262T250AF2B 38.4 8.3 1 3/8 X 5 5/82600 500C262T250CH2B 51.6 7.8 2 1/2 X 2 5/82800 500C282T250EC2B 40.4 8.3 1 3/4 X 4 1/83100 500C312T250BJ2B 38.1 8.8 2 X 3 5/83300 500C332T250ED2B 34.7 9.3 1 3/4 X 4 5/83700 500C372T250CB2B 32.0 10.5 2 1/2 X 3 1/83800 500C382T250EE2B 30.5 10.3 1 3/4 X 5 1/83800 500C382T250BC2B 31.4 10.1 2 X 4 1/84300 500C432T250EF2B 27.3 11.2 1 3/4 X 5 5/84500 500C452T250BD2B 26.9 11.4 2 X 4 5/84700 500C472T250CJ2B 25.0 12.4 2 1/2 X 3 5/85200 500C522T250BE2B 23.6 12.6 2 X 5 1/85600 500C562T250DB2B 27.6 12.6 3 X 3 1/85800 500C582T250CC2B 20.7 14.3 2 1/2 X 4 1/85900 500C592T250BF2B 21.0 13.8 2 X 5 5/86900 500C692T250CD2B 17.7 16.1 2 1/2 X 4 5/87200 500C722T250DJ2B 21.6 15.0 3 X 3 5/87900 500C792T250CE2B 15.5 17.7 2 1/2 X 5 1/88800 500C882T250DC2B 17.6 17.3 3 X 4 1/89000 500C902T250CF2B 13.8 19.4 2 1/2 X 5 5/8

10000 500C103T250DD2B 16.3 18.6 3 X 4 5/811000 500C113T250FC2B 19.5 18.1 3 1/2 X 4 1/812000 500C123T250DE2B 14.3 20.6 3 X 5 1/813000 500C133T250FD2B 17.2 19.9 3 1/2 X 4 5/814000 500C143T250DF2B 12.0 23.2 3 X 5 5/815000 500C153T250DP2B 11.5 23.9 3 X 5 7/815000 500C153T250FE2B 15.1 22.0 3 1/2 X 5 1/817000 500C173T250FF2B 13.2 24.2 3 1/2 X 5 5/818000 500C183T250FP2B 12.8 24.8 3 1/2 X 5 7/821000 500C213T250DN2D 9.6 30.9 3 X 7 5/824000 500C243T250DG2D 7.0 34.6 3 X 8 5/825000 500C253T250FN2D 10.5 30.0 3 1/2 X 7 5/829000 500C293T250FG2D 9.2 33.0 3 1/2 X 8 5/8

300 Vdc (350 Vdc Surge)290 500C291T300AK2B 418 1.6 1 3/8 X 1 5/8520 500C521T300AA2B 231 2.3 1 3/8 X 2 1/8630 500C631T300AH2B 189 2.8 1 3/8 X 2 5/8870 500C871T300AB2B 138 3.5 1 3/8 X 3 1/8870 500C871T300EA2B 139 3.5 1 3/4 X 2 1/8

1000 500C102T300BA2B 131 3.9 2 X 2 1/81100 500C112T300AJ2B 107 4.2 1 3/8 X 3 5/81100 500C112T300EH2B 117 4.1 1 3/4 X 2 5/81300 500C132T300AC2B 90.4 4.8 1 3/8 X 4 1/81300 500C132T300BH2B 103 4.8 2 X 2 5/81400 500C142T300EB2B 84.5 5.2 1 3/4 X 3 1/81600 500C162T300AD2B 77.4 5.4 1 3/8 X 4 5/81800 500C182T300AE2B 65.7 6.1 1 3/8 X 5 1/81800 500C182T300EJ2B 68.3 6.1 1 3/4 X 3 5/81900 500C192T300BB2B 71.1 6.1 2 X 3 1/82000 500C202T300AF2B 60.3 6.6 1 3/8 X 5 5/82200 500C222T300EC2B 56.7 7.0 1 3/4 X 4 1/82200 500C222T300CH2B 60.5 7.2 2 1/2 X 2 5/82400 500C242T300BJ2B 55.5 7.3 2 X 3 5/82600 500C262T300ED2B 48.5 7.9 1 3/4 X 4 5/82900 500C292T300BC2B 45.7 8.4 2 X 4 1/82900 500C292T300CB2B 46.5 8.7 2 1/2 X 3 1/83000 500C302T300EE2B 42.5 8.7 1 3/4 X 5 1/83400 500C342T300EF2B 37.9 9.5 1 3/4 X 5 5/83500 500C352T300BD2B 38.9 9.5 2 X 4 5/83700 500C372T300CJ2B 38.1 10.1 2 1/2 X 3 5/84000 500C402T300BE2B 34.0 10.5 2 X 5 1/84100 500C412T300DB2B 42.8 10.1 3 X 3 1/84500 500C452T300BF2B 30.2 11.5 2 X 5 5/84500 500C452T300CC2B 29.9 11.9 2 1/2 X 4 1/85200 500C522T300DJ2B 34.0 11.9 3 X 3 5/85300 500C532T300CD2B 25.5 13.4 2 1/2 X 4 5/86100 500C612T300CE2B 22.2 14.8 2 1/2 X 5 1/86400 500C642T300DC2B 26.2 14.2 3 X 4 1/86900 500C692T300CF2B 19.8 16.2 2 1/2 X 5 5/87500 500C752T300DD2B 23.6 15.5 3 X 4 5/88700 500C872T300DE2B 20.5 17.2 3 X 5 1/88900 500C892T300FC2B 21.0 17.4 3 1/2 X 4 1/89800 500C982T300DF2B 18.0 18.9 3 X 5 5/8

10000 500C103T300DP2B 17.0 19.7 3 X 5 7/810000 500C103T300FD2B 18.2 19.4 3 1/2 X 4 5/812000 500C123T300FE2B 16.0 21.3 3 1/2 X 5 1/813000 500C133T300FF2B 14.3 23.2 3 1/2 X 5 5/814000 500C143T300FP2B 13.5 24.2 3 1/2 X 5 7/815000 500C153T300DN2B 13.2 24.9 3 X 7 5/817000 500C173T300DG2B 10.8 27.9 3 X 8 5/819000 500C193T300FN2D 11.0 29.5 3 1/2 X 7 5/822000 500C223T300FG2D 9.3 32.6 3 1/2 X 8 5/8

350 Vdc (400 Vdc Surge)200 500C201T350AK2B 605 1.3 1 3/8 X 1 5/8320 500C321T350AA2B 379 1.8 1 3/8 X 2 1/8470 500C471T350AH2B 253 2.4 1 3/8 X 2 5/8630 500C631T350AB2B 190 3.0 1 3/8 X 3 1/8720 500C721T350EA2B 177 3.1 1 3/4 X 2 1/8770 500C771T350EH2B 162 3.5 1 3/4 X 2 5/8





Ratings


Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


790 500C791T350AJ2B 153 3.5 1 3/8 X 3 5/8790 500C791T350BA2B 168 3.5 2 X 2 1/8950 500C951T350AC2B 127 4.0 1 3/8 X 4 1/8977 500C971T350BH2B 132 4.2 2 X 2 5/8996 500C991T350EB2B 125 4.3 1 3/4 X 3 1/8

1100 500C112T350AD2B 110 4.5 1 3/8 X 4 5/81300 500C132T350AE2B 96.3 5.0 1 3/8 X 5 1/81300 500C132T350EJ2B 97.3 5.1 1 3/4 X 3 5/81300 500C132T350BB2B 101 5.1 2 X 3 1/81400 500C142T350AF2B 85.9 5.5 1 3/8 X 5 5/81500 500C152T350CH2B 86.9 6.0 2 1/2 X 2 5/81600 500C162T350EC2B 79.9 5.9 1 3/4 X 4 1/81600 500C162T350BJ2B 79.2 6.1 2 X 3 5/81800 500C182T350ED2B 67.8 6.6 1 3/4 X 4 5/82000 500C202T350BC2B 65.1 7.0 2 X 4 1/82100 500C212T350EE2B 59.1 7.4 1 3/4 X 5 1/82100 500C212T350CB2B 61.0 7.6 2 1/2 X 3 1/82300 500C232T350BD2B 55.4 8.0 2 X 4 5/82400 500C242T350EF2B 52.4 8.1 1 3/4 X 5 5/82700 500C272T350BE2B 48.3 8.8 2 X 5 1/82700 500C272T350CJ2B 48.5 8.9 2 1/2 X 3 5/82900 500C292T350DB2B 54.0 9.0 3 X 3 1/83100 500C312T350BF2B 42.8 9.7 2 X 5 5/83300 500C332T350CC2B 39.9 10.3 2 1/2 X 4 1/83700 500C372T350DJ2B 41.7 10.8 3 X 3 5/83900 500C392T350CD2B 34.0 11.6 2 1/2 X 4 5/84500 500C452T350CE2B 29.6 12.8 2 1/2 X 5 1/84600 500C462T350DC2B 34.7 12.3 3 X 4 1/85100 500C512T350CF2B 26.2 14.1 2 1/2 X 5 5/85400 500C542T350DD2B 29.6 13.9 3 X 4 5/86200 500C622T350DE2B 25.8 15.3 3 X 5 1/86400 500C642T350FC2B 29.9 14.6 3 1/2 X 4 1/87000 500C702T350DF2B 22.9 16.7 3 X 5 5/87500 500C752T350DP2B 21.7 17.4 3 X 5 7/87500 500C752T350FD2B 25.7 16.3 3 1/2 X 4 5/88700 500C872T350FE2B 22.5 18.0 3 1/2 X 5 1/89800 500C982T350FF2B 20.0 19.6 3 1/2 X 5 5/8

10000 500C103T350DN2B 17.1 21.8 3 X 7 5/810000 500C103T350FP2B 18.9 20.4 3 1/2 X 5 7/812000 500C123T350DG2B 14.2 24.3 3 X 8 5/815000 500C153T350FN2B 14.9 25.4 3 1/2 X 7 5/817000 500C173T350FG2B 12.4 28.3 3 1/2 X 8 5/8

400 Vdc (450 Vdc Surge)160 500C161T400AK2B 652 1.3 1 3/8 X 1 5/8250 500C251T400AA2B 408 1.8 1 3/8 X 2 1/8380 500C381T400AH2B 273 2.3 1 3/8 X 2 5/8500 500C501T400AB2B 205 2.9 1 3/8 X 3 1/8570 500C571T400EA2B 189 3.0 1 3/4 X 2 1/8610 500C611T400EH2B 174 3.4 1 3/4 X 2 5/8630 500C631T400AJ2B 164 3.4 1 3/8 X 3 5/8630 500C631T400BA2B 179 3.4 2 X 2 1/8750 500C751T400AC2B 137 3.9 1 3/8 X 4 1/8780 500C781T400BH2B 142 4.1 2 X 2 5/8790 500C791T400EB2B 134 4.1 1 3/4 X 3 1/8880 500C881T400AD2B 118 4.4 1 3/8 X 4 5/8

1000 500C102T400AE2B 104 4.9 1 3/8 X 5 1/81000 500C102T400EJ2B 105 4.9 1 3/4 X 3 5/8

1000 500C102T400BB2B 109 5.0 2 X 3 1/81100 500C112T400AF2B 92.4 5.3 1 3/8 X 5 5/81200 500C122T400EC2B 85.8 5.7 1 3/4 X 4 1/81200 500C122T400CH2B 93.1 5.8 2 1/2 X 2 5/81300 500C132T400BJ2B 85.0 5.9 2 X 3 5/81500 500C152T400ED2B 72.9 6.4 1 3/4 X 4 5/81600 500C162T400BC2B 69.8 6.8 2 X 4 1/81700 500C172T400EE2B 63.4 7.1 1 3/4 X 5 1/81700 500C172T400CB2B 65.3 7.3 2 1/2 X 3 1/81900 500C192T400EF2B 56.2 7.8 1 3/4 X 5 5/81900 500C192T400BD2B 59.3 7.7 2 X 4 5/82100 500C212T400BE2B 51.7 8.5 2 X 5 1/82100 500C212T400CJ2B 52.0 8.6 2 1/2 X 3 5/82300 500C232T400DB2B 57.5 8.8 3 X 3 1/82400 500C242T400BF2B 45.9 9.3 2 X 5 5/82600 500C262T400CC2B 42.8 9.9 2 1/2 X 4 1/83000 500C302T400DJ2B 44.9 10.4 3 X 3 5/83100 500C312T400CD2B 35.6 11.3 2 1/2 X 4 5/83500 500C352T400CE2B 31.7 12.4 2 1/2 X 5 1/83600 500C362T400DC2B 37.0 11.9 3 X 4 1/84000 500C402T400CF2B 31.5 12.8 2 1/2 X 5 5/84300 500C432T400DD2B 28.1 14.2 3 X 4 5/84900 500C492T400DE2B 27.4 14.8 3 X 5 1/85100 500C512T400FC2B 31.9 14.1 3 1/2 X 4 1/85600 500C562T400DF2B 24.4 16.2 3 X 5 5/85900 500C592T400DP2B 23.1 16.9 3 X 5 7/86000 500C602T400FD2B 27.4 15.8 3 1/2 X 4 5/86900 500C692T400FE2B 23.9 17.5 3 1/2 X 5 1/87800 500C782T400FF2B 21.2 19.0 3 1/2 X 5 5/88200 500C822T400DN2B 18.2 21.2 3 X 7 5/88300 500C832T400FP2B 20.1 19.8 3 1/2 X 5 7/89500 500C952T400DG2B 15.1 23.6 3 X 8 5/8

11000 500C113T400FN2B 15.8 24.7 3 1/2 X 7 5/813000 500C133T400FG2B 13.1 27.5 3 1/2 X 8 5/8

450 Vdc (500 Vdc Surge)140 500C141T450AK2B 797 1.1 1 3/8 X 1 5/8220 500C221T450AA2B 438 1.7 1 3/8 X 2 1/8330 500C331T450AH2B 337 2.1 1 3/8 X 2 5/8420 500C421T450EA2B 264 2.6 1 3/4 X 2 1/8440 500C441T450AB2B 253 2.6 1 3/8 X 3 1/8520 500C521T450EH2B 213 3.1 1 3/4 X 2 5/8550 500C551T450AJ2B 203 3.1 1 3/8 X 3 5/8550 500C551T450BA2B 228 3.0 2 X 2 1/8660 500C661T450AC2B 169 3.5 1 3/8 X 4 1/8670 500C671T450EB2B 165 3.7 1 3/4 X 3 1/8680 500C681T450BH2B 178 3.6 2 X 2 5/8760 500C761T450AD2B 146 3.9 1 3/8 X 4 5/8870 500C871T450AE2B 128 4.4 1 3/8 X 5 1/8870 500C871T450EJ2B 131 4.4 1 3/4 X 3 5/8870 500C871T450BB2B 137 4.4 2 X 3 1/8980 500C981T450AF2B 114 4.8 1 3/8 X 5 5/8

1100 500C112T450EC2B 107 5.1 1 3/4 X 4 1/81100 500C112T450BJ2B 109 5.2 2 X 3 5/81100 500C112T450CH2B 116 5.2 2 1/2 X 2 5/81300 500C132T450ED2B 91.1 5.7 1 3/4 X 4 5/81400 500C142T450EE2B 79.2 6.4 1 3/4 X 5 1/81400 500C142T450BC2B 89.5 6.0 2 X 4 1/8





Ratings


Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


1500 500C152T450CB2B 81.1 6.6 2 1/2 X 3 1/81600 500C162T450EF2B 70.2 7.0 1 3/4 X 5 5/81600 500C162T450BD2B 76.0 6.8 2 X 4 5/81900 500C192T450BE2B 66.1 7.5 2 X 5 1/81900 500C192T450CJ2B 66.5 7.6 2 1/2 X 3 5/82100 500C212T450BF2B 58.6 8.3 2 X 5 5/82100 500C212T450DB2B 63.8 8.3 3 X 3 1/82400 500C242T450CC2B 54.7 8.8 2 1/2 X 4 1/82700 500C272T450DJ2B 49.8 9.9 3 X 3 5/82800 500C282T450CD2B 46.4 9.9 2 1/2 X 4 5/83200 500C322T450CE2B 40.4 11.0 2 1/2 X 5 1/83300 500C332T450DC2B 38.2 11.8 3 X 4 1/83600 500C362T450CF2B 35.4 12.1 2 1/2 X 5 5/83900 500C392T450DD2B 35.7 12.6 3 X 4 5/84500 500C452T450DE2B 30.9 14.0 3 X 5 1/84600 500C462T450FC2B 30.3 14.5 3 1/2 X 4 1/85100 500C512T450DF2B 27.4 15.3 3 X 5 5/85400 500C542T450DP2B 26.0 15.9 3 X 5 7/85400 500C542T450FD2B 25.7 16.3 3 1/2 X 4 5/86300 500C632T450FE2B 22.4 18.0 3 1/2 X 5 1/87100 500C712T450FF2B 19.9 19.7 3 1/2 X 5 5/87500 500C752T450FP2B 18.8 20.5 3 1/2 X 5 7/87500 500C752T450DN2B 20.3 20.0 3 X 7 5/88700 500C872T450DG2B 16.8 22.4 3 X 8 5/89700 500C972T450FN2B 15.1 25.2 3 1/2 X 7 5/8

11000 500C113T450FG2B 12.7 28.0 3 1/2 X 8 5/8500 Vdc (550 Vdc Surge)

100 500C101T500AK2B 1224 0.9 1 3/8 X 1 5/8170 500C171T500AA2B 722 1.3 1 3/8 X 2 1/8230 500C231T500AH2B 546 1.7 1 3/8 X 2 5/8260 500C261T500EA2B 498 1.9 1 3/4 X 2 1/8310 500C311T500AB2B 410 2.0 1 3/8 X 3 1/8320 500C321T500BA2B 393 2.3 2 X 2 1/8370 500C371T500EH2B 347 2.4 1 3/4 X 2 5/8380 500C381T500AJ2B 328 2.4 1 3/8 X 3 5/8460 500C461T500AC2B 293 2.7 1 3/8 X 4 1/8470 500C471T500BH2B 274 2.9 2 X 2 5/8480 500C481T500EB2B 265 2.9 1 3/4 X 3 1/8530 500C531T500AD2B 261 2.9 1 3/8 X 4 5/8610 500C611T500AE2B 231 3.3 1 3/8 X 5 1/8620 500C621T500EJ2B 202 3.5 1 3/4 X 3 5/8650 500C651T500BB2B 200 3.7 2 X 3 1/8690 500C691T500AF2B 195 3.7 1 3/8 X 5 5/8760 500C761T500EC2B 169 4.0 1 3/4 X 4 1/8770 500C771T500CH2B 171 4.3 2 1/2 X 2 5/8840 500C841T500BJ2B 156 4.4 2 X 3 5/8890 500C891T500ED2B 143 4.6 1 3/4 X 4 5/8960 500C961T500BC2B 136 4.9 2 X 4 1/8

1000 500C102T500EE2B 125 5.1 1 3/4 X 5 1/81100 500C112T500BD2B 115 5.5 2 X 4 5/81100 500C112T500CB2B 122 5.4 2 1/2 X 3 1/81200 500C122T500EF2B 110 5.6 1 3/4 X 5 5/81300 500C132T500BE2B 100 6.1 2 X 5 1/81400 500C142T500CJ2B 95.1 6.4 2 1/2 X 3 5/81500 500C152T500BF2B 88.9 6.7 2 X 5 5/8



Ratings


1600 500C162T500DB2B 86.4 7.1 3 X 3 1/81700 500C172T500CC2B 78.1 7.4 2 1/2 X 4 1/82000 500C202T500CD2B 66.3 8.3 2 1/2 X 4 5/82100 500C212T500DJ2B 67.4 8.5 3 X 3 5/82200 500C222T500CE2B 61.1 8.9 2 1/2 X 5 1/82400 500C242T500CF2B 54.7 9.7 2 1/2 X 5 5/82400 500C242T500DC2B 55.4 9.8 3 X 4 1/82800 500C282T500DD2B 48.1 10.9 3 X 4 5/83300 500C332T500DE2B 43.1 11.8 3 X 5 1/83400 500C342T500FC2B 40.1 12.6 3 1/2 X 4 1/83700 500C372T500DF2B 37.5 13.1 3 X 5 5/83900 500C392T500DP2B 35.5 13.6 3 X 5 7/84000 500C402T500FD2B 34.1 14.2 3 1/2 X 4 5/84600 500C462T500FE2B 30.0 15.6 3 1/2 X 5 1/85200 500C522T500FF2B 28.0 16.6 3 1/2 X 5 5/85400 500C542T500DN2B 27.9 17.1 3 X 7 5/85500 500C552T500FP2B 26.0 17.4 3 1/2 X 5 7/86300 500C632T500DG2B 23.1 19.1 3 X 8 5/87600 500C762T500FN2B 20.5 21.8 3 1/2 X 7 5/88800 500C882T500FG2B 16.7 24.4 3 1/2 X 8 5/8

550 Vdc (600 Vdc Surge)1400 500C142T550CC2B 170.5 4.90 2 1/2 X 4.1251700 500C172T550CD2B 132.6 5.90 2 1/2 X 4.6251900 500C192T550CE2B 111.7 6.80 2 1/2 X 5.1252200 500C222T550DC2B 90.4 7.80 3 X 4.1252300 500C232T550CF2B 86.5 7.80 2 1/2 X 5.6252500 500C252T550DD2B 79.6 8.40 3 X 4.6252900 500C292T550DE2B 64.0 9.70 3 X 5.1253400 500C342T550DF2B 54.6 10.90 3 X 5.625



Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER



Rated Voltage: 200 to 500 VdcCapacitance: 84 F to 39,000 F

Capacitance Tolerance: 10% +50%Leakage Current: 3 CV (A), 5 mA max, 5 minutesCold Impedance: 20 °C Multiple of 25 °C Z 3

Ripple Current Multipliers: Ambient Temperature

Frequency


1 3/8” & 1 3/4” Diameters:200 to 350 V 0.76 0.81 1.00 1.24 1.36 1.43 1.44400 to 500 Vx 0.76 0.81 1.00 1.24 1.37 1.44 1.45

2” & 2 1/2” Diameters:200 to 350 V 0.78 0.83 1.00 1.20 1.29 1.34 1.35400 to 500 V 0.77 0.82 1.00 1.22 1.33 1.39 1.40


EIA Ripple Life: 8,000 h at full load @ +85 °C per EIA 1S-749 Capacitance ±20%ESR 200% of limitDCL 100% of limit

Shelf Life Test: 500 h @ 85 °C, capacitance, ESR and DCL, initial requirements.Vibration: 10 to 55 Hz, 0.06” and 10 g max, 1.5 h ea of 2 axis

Type 520C, 85 °C Long-Life, Inverter Grade, Aluminum

Highlights New 8,000 hour load life Ripple current to 55 amps ESRs to 8 mΩ Best value high ripple current Thermal-Pak extended cathode construction

Best Value High Ripple TypeType 520C is the 85 °C version of the Type 550C Inverter-Grade capacitor. It delivers the ripple-current capability andexceptional life needed for motor-drive bus capacitors andapproaches the performance of the 550C at lower cost. It israted for 8000 hours life with full ripple current, rated volt-age, 85 °C and 100 lfm airflow while mounted horizontally.Horizontal mounting is more severe than vertical mounting.The extended cathode foil of the 520C assures heat flowfrom the capacitor element to the can in all orientations.

Ultra-Ripple, Long-life, Inverter Grade, 85 C

45 °C 55 °C 65 °C 75 °C 85 °C1.80 1.63 1.45 1.25 1.00

F

ripple

life550Cp 2.034

550Cp 2.034

MORE500Cp 2.017



Terminal Dimensions

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Type 520C, 85 °C Long-life, Inverter Grade, Aluminum

Outline Drawings



Diam. (D) Length (L) Terminals (S)Case .031 .78 .062 1.57 0.015 .38 Typical WeightCode Inches mm Inches mm Inches mm oz gAK 1.375 34.93 1.625 41.28 0.500 12.70 1.9 54AA 1.375 34.93 2.125 53.98 0.500 12.70 2.0 57AH 1.375 34.93 2.625 66.68 0.500 12.70 2.7 77AB 1.375 34.93 3.125 79.38 0.500 12.70 3.3 94AJ 1.375 34.93 3.625 92.08 0.500 12.70 3.8 108AC 1.375 34.93 4.125 104.78 0.500 12.70 4.4 125AD 1.375 34.93 4.625 117.48 0.500 12.70 5.1 145AE 1.375 34.93 5.125 130.18 0.500 12.70 6.8 193AF 1.375 34.93 5.625 142.88 0.500 12.70 8.1 230EA 1.750 44.45 2.125 53.98 0.750 19.05 2.7 76EH 1.750 44.45 2.625 66.68 0.750 19.05 3.8 108EB 1.750 44.45 3.125 79.38 0.750 19.05 5.1 145EJ 1.750 44.45 3.625 92.08 0.750 19.05 6.8 193EC 1.750 44.45 4.125 104.78 0.750 19.05 8.1 230ED 1.750 44.45 4.625 117.48 0.750 19.05 9.0 255EE 1.750 44.45 5.125 130.18 0.750 19.05 9.5 269EF 1.750 44.45 5.625 142.88 0.750 19.05 10.5 298BA 2.000 50.80 2.125 53.98 0.875 22.23 5.4 153BH 2.000 50.80 2.625 66.68 0.875 22.23 6.1 173BB 2.000 50.80 3.125 79.38 0.875 22.23 6.8 193BJ 2.000 50.80 3.625 92.08 0.875 22.23 8.2 232BC 2.000 50.80 4.125 104.78 0.875 22.23 9.5 269BD 2.000 50.80 4.625 117.48 0.875 22.23 10.3 292BE 2.000 50.80 5.125 130.18 0.875 22.23 10.7 303BF 2.000 50.80 5.625 142.88 0.875 22.23 13.0 369CH 2.500 63.50 2.625 66.68 1.125 28.58 9.2 261CB 2.500 63.50 3.125 79.38 1.125 28.58 10.4 295CJ 2.500 63.50 3.625 92.08 1.125 28.58 12.7 361CC 2.500 63.50 4.125 104.78 1.125 28.58 15.0 425CD 2.500 63.50 4.625 117.48 1.125 28.58 17.2 488CE 2.500 63.50 5.125 130.18 1.125 28.58 19.3 547CF 2.500 63.50 5.625 142.88 1.125 28.58 21.4 607DJ 3.000 76.20 3.625 92.08 1.250 31.75 20.0 567DC 3.000 76.20 4.125 104.78 1.250 31.75 22.2 629DD 3.000 76.20 4.625 117.48 1.250 31.75 25.5 723DE 3.000 76.20 5.125 130.18 1.250 31.75 30.0 850DF 3.000 76.20 5.625 142.88 1.250 31.75 31.9 904DP 3.000 76.20 5.875 149.23 1.250 31.75 32.8 931DN 3.000 76.20 7.625 193.68 1.250 31.75 39.5 1119DG 3.000 76.20 8.625 219.08 1.250 31.75 43.3 1227FC 3.500 88.90 4.125 104.78 1.250 31.75 30.0 850FD 3.500 88.90 4.625 117.48 1.250 31.75 34.4 976FE 3.500 88.90 5.125 130.18 1.250 31.75 40.5 1148FF 3.500 88.90 5.625 142.88 1.250 31.75 43.1 1221FP 3.500 88.90 5.875 149.23 1.250 31.75 44.3 1257FN 3.500 88.90 7.625 193.68 1.250 31.75 53.3 1512FG 3.500 88.90 8.625 219.08 1.250 31.75 58.5 1658

Case Dimensions

Stud Dimensions


+0-.062

(+0-1.57)

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Type 520C, 85 °C Long-Life, Inverter Grade, Aluminum

Part Numbering System520C 782 T 500 FG 2 D S

Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style782 = 7800 F M =20% 200 = 200 Vdc 0 = None A = Low Post Blank =

U =10% +75% 500 = 500 Vdc 1 = Polyester B = High Post StandardT = 10% +50% 2 = PVC D = High Current Can

Low Post S = StudE = High Current, Bottom

High Post P = Stud withF = M5 Post thermal

pad



Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings



1300 520C132T200AB2B 82.4 4.9 1 3/8 X 3 1/81300 520C132T200EA2B 83.1 4.9 1 3/4 X 2 1/81400 520C142T200BA2B 86.1 5.2 2 X 2 1/81600 520C162T200AJ2B 67.1 5.7 1 3/8 X 3 5/81600 520C162T200EH2B 65.7 5.9 1 3/4 X 2 5/82000 520C202T200AC2B 54.2 6.6 1 3/8 X 4 1/82000 520C202T200BH2B 64.1 6.5 2 X 2 5/82200 520C222T200EB2B 50.8 7.2 1 3/4 X 3 1/82300 520C232T200AD2B 45.4 7.6 1 3/8 X 4 5/82700 520C272T200AE2B 39.7 8.4 1 3/8 X 5 1/82700 520C272T200EJ2B 39.8 8.5 1 3/4 X 3 5/82800 520C282T200BB2B 48.4 8.0 2 X 3 1/83000 520C302T200AF2B 35.0 9.3 1 3/8 X 5 5/83200 520C322T200CH2B 44.3 9.0 2 1/2 X 2 5/83300 520C332T200EC2B 32.9 9.8 1 3/4 X 4 1/83600 520C362T200BJ2B 38.0 9.5 2 X 3 5/83900 520C392T200ED2B 28.1 11.1 1 3/4 X 4 5/84400 520C442T200BC2B 30.0 11.2 2 X 4 1/84400 520C442T200CB2B 32.8 11.1 2 1/2 X 3 1/84500 520C452T200EE2B 24.6 12.3 1 3/4 X 5 1/85000 520C502T200EF2B 22.0 13.4 1 3/4 X 5 5/85200 520C522T200BD2B 25.7 12.5 2 X 4 5/85700 520C572T200CJ2B 23.4 13.8 2 1/2 X 3 5/86000 520C602T200BE2B 22.8 13.8 2 X 5 1/86400 520C642T200DB2B 31.8 12.6 3 X 3 1/86800 520C682T200BF2B 20.6 15.0 2 X 5 5/87000 520C702T200CC2B 21.3 15.1 2 1/2 X 4 1/88200 520C822T200CD2B 18.2 17.0 2 1/2 X 4 5/88200 520C822T200DJ2B 24.9 15.0 3 X 3 5/89500 520C952T200CD2B 16.6 18.4 2 1/2 X 5 1/8

10000 520C103T200DC2B 20.7 17.1 3 X 4 1/811000 520C113T200CF2B 14.4 20.4 2 1/2 X 5 5/812000 520C123T200DD2B 17.7 19.2 3 X 4 5/814000 520C143T200DE2B 18.0 19.7 3 X 5 1/815000 520C153T200FG2B 15.6 21.7 3 1/2 X 4 1/816000 520C163T200DF2B 14.0 23.0 3 X 5 5/816000 520C163T200DP2B 16.1 21.7 3 X 5 7/817000 520C173T200FG2B 13.3 24.4 3 1/2 X 4 5/820000 520C203T200FG2B 14.1 24.4 3 1/2 X 5 1/822000 520C223T200DN2D 12.3 27.6 3 X 7 5/823000 520C233T200FG2B 12.6 26.5 3 1/2 X 5 5/824000 520C243T200FG2B 12.0 27.5 3 1/2 X 5 7/826000 520C263T200DG2D 10.1 31.0 3 X 8 5/834000 520C343T200FN2D 9.7 33.6 3 1/2 X 7 5/839000 520C393T200FG2D 8.3 37.2 3.5 X 8 5/8

250 Vdc (300 Vdc Surge)290 520C291T250AK2B 273 2.1 1 3/8 X 1 5/8530 520C531T250AA2B 164 3.0 1 3/8 X 2 1/8640 520C641T250AH2B 125 3.7 1 3/8 X 2 5/8880 520C881T250AB2B 91.9 4.6 1 3/8 X 3 1/8880 520C881T250EA2B 104 4.4 1 3/4 X 2 1/8940 520C941T250BA2B 99.3 4.9 2 X 2 1/8

1100 520C112T250AJ2B 72.9 5.5 1 3/8 X 3 5/81100 520C112T250EH2B 87.0 5.2 1 3/4 X 2 5/81300 520C132T250AC2B 60.6 6.3 1 3/8 X 4 1/81400 520C142T250BH2B 69.0 6.3 2 X 2 5/8

1500 520C152T250EB2B 64.1 6.4 1 3/4 X 3 1/81600 520C162T250AD2B 54.1 6.9 1 3/8 X 4 5/81800 520C182T250AE2B 46.3 7.8 1 3/8 X 5 1/81900 520C192T250EJ2B 51.0 7.6 1 3/4 X 3 5/81900 520C192T250BB2B 48.5 8.0 2 X 3 1/82000 520C202T250AF2B 40.3 8.7 1 3/8 X 5 5/82100 520C212T250CH2B 54.2 8.2 2 1/2 X 2 5/82200 520C222T250EC2B 42.4 8.7 1 3/4 X 4 1/82400 520C242T250BJ2B 40.0 9.2 2 X 3 5/82600 520C262T250ED2B 36.4 9.7 1 3/4 X 4 5/83000 520C302T250EE2B 32.0 10.8 1 3/4 X 5 1/83000 520C302T250BC2B 33.0 10.6 2 X 4 1/83000 520C302T250CB2B 33.6 11.0 2 1/2 X 3 1/83400 520C342T250EF2B 28.6 11.8 1 3/4 X 5 5/83500 520C352T250BD2B 28.2 12.0 2 X 4 5/83900 520C392T250CJ2B 26.3 13.0 2 1/2 X 3 5/84100 520C412T250BE2B 24.7 13.2 2 X 5 1/84300 520C432T250DB2B 29.0 13.2 3 X 3 1/84600 520C462T250BF2B 22.1 14.5 2 X 5 5/84700 520C472T250CC2B 21.8 15.0 2 1/2 X 4 1/85600 520C562T250CD2B 18.6 16.8 2 1/2 X 4 5/85600 520C562T250DJ2B 22.7 15.7 3 X 3 5/86400 520C642T250CD2B 16.3 18.6 2 1/2 X 5 1/86800 520C682T250DC2B 18.5 18.2 3 X 4 1/87300 520C732T250CF2B 14.5 20.3 2 1/2 X 5 5/88000 520C802T250DD2B 17.1 19.5 3 X 4 5/89300 520C932T250DE2B 15.0 21.6 3 X 5 1/8

10000 520C103T250FC2B 20.4 19.0 3 1/2 X 4 1/811000 520C113T250DF2B 12.6 24.3 3 X 5 5/811000 520C113T250DP2B 12.1 25.1 3 X 5 7/812000 520C123T250FD2B 18.1 20.9 3 1/2 X 4 5/814000 520C143T250FE2B 15.8 23.0 3 1/2 X 5 1/815000 520C153T250FF2B 13.9 25.3 3 1/2 X 5 5/816000 520C163T250DN2B 9.1 32.2 3 X 7 5/816000 520C163T250FP2B 13.5 26.0 3 1/2 X 5 7/818000 520C183T250DG2D 7.4 36.2 3 X 8 5/822000 520C223T250FN2B 11.0 31.5 3 1/2 X 7 5/826000 520C263T250FG2D 9.6 34.6 3 1/2 X 8 5/8

300 Vdc (350 Vdc Surge)210 520C211T300AK2B 439 1.7 1 3/8 X 1 5/8360 520C361T300AA2B 243 2.5 1 3/8 X 2 1/8510 520C511T300AH2B 198 2.9 1 3/8 X 2 5/8530 520C531T300EA2B 146 3.7 1 3/4 X 2 1/8670 520C671T300AB2B 144 3.7 1 3/8 X 3 1/8670 520C671T300BA2B 138 4.1 2 X 2 1/8760 520C761T300EH2B 123 4.3 1 3/4 X 2 5/8840 520C841T300AJ2B 112 4.4 1 3/8 X 3 5/8960 520C961T300BH2B 108 5.0 2 X 2 5/8

1000 520C102T300AC2B 94.9 5.0 1 3/8 X 4 1/81100 520C112T300EB2B 88.7 5.4 1 3/4 X 3 1/81200 520C122T300AD2B 81.2 5.7 1 3/8 X 4 5/81300 520C132T300AE2B 69.0 6.4 1 3/8 X 5 1/81300 520C132T300BB2B 71.7 6.6 2 X 3 1/81400 520C142T300EJ2B 74.7 6.2 1 3/4 X 3 5/81500 520C152T300AF2B 63.4 6.9 1 3/8 X 5 5/81600 520C162T300CH2B 59.5 7.8 2 1/2 X 2 5/81700 520C172T300EC2B 63.6 7.1 1 3/4 X 4 1/81700 520C172T300BJ2B 58.3 7.7 2 X 3 5/82000 520C202T300ED2B 51.0 8.2 1 3/4 X 4 5/82200 520C222T300CB2B 48.8 9.1 2 1/2 X 3 1/8








CORNELLDUBILIER


Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de

Ratings


2300 520C232T300EE2B 44.7 9.1 1 3/4 X 5 1/82400 520C242T300BC2B 48.0 8.8 2 X 4 1/82500 520C252T300BD2B 40.8 9.9 2 X 4 5/82600 520C262T300EF2B 39.8 10.0 1 3/4 X 5 5/82900 520C292T300BE2B 35.7 11.0 2 X 5 1/82900 520C292T300CJ2B 40.0 10.6 2 1/2 X 3 5/83300 520C332T300BF2B 31.7 12.1 2 X 5 5/83400 520C342T300DB2B 44.9 10.6 3 X 3 1/83500 520C352T300CC2B 31.4 12.5 2 1/2 X 4 1/84100 520C412T300CD2B 26.8 14.0 2 1/2 X 4 5/84300 520C432T300DJ2B 35.7 12.5 3 X 3 5/84800 520C482T300CD2B 23.3 15.5 2 1/2 X 5 1/85300 520C532T300DC2B 27.5 14.9 3 X 4 1/85400 520C542T300CF2B 20.7 17.0 2 1/2 X 5 5/86300 520C632T300DD2B 24.8 16.3 3 X 4 5/87200 520C722T300DE2B 21.5 18.0 3 X 5 1/87400 520C742T300FC2B 22.1 18.2 3 1/2 X 4 1/88200 520C822T300DF2B 18.9 19.8 3 X 5 5/88700 520C872T300DP2B 17.9 20.6 3 X 5 7/88800 520C882T300FD2B 19.1 20.3 3 1/2 X 4 5/8

10000 520C103T300FE2B 16.8 22.3 3 1/2 X 5 1/811000 520C113T300FF2B 15.0 24.4 3 1/2 X 5 5/812000 520C123T300DN2B 13.8 26.1 3 X 7 5/812000 520C123T300FP2B 14.2 25.3 3 1/2 X 5 7/814000 520C143T300DG2B 11.3 29.3 3 X 8 5/817000 520C173T300FN2D 11.5 30.9 3 1/2 X 7 5/820000 520C203T300FG2D 9.8 34.2 3 1/2 X 8 5/8

350 Vdc (400 Vdc Surge)190 520C191T350AK2B 636 1.4 1 3/8 X 1 5/8330 520C331T350AA2B 398 1.9 1 3/8 X 2 1/8460 520C461T350AH2B 266 2.5 1 3/8 X 2 5/8480 520C481T350EA2B 185 3.3 1 3/4 X 2 1/8610 520C611T350BA2B 176 3.7 2 X 2 1/8620 520C621T350AB2B 200 3.1 1 3/8 X 3 1/8690 520C691T350EH2B 170 3.7 1 3/4 X 2 5/8770 520C771T350AJ2B 160 3.7 1 3/8 X 3 5/8880 520C881T350BH2B 139 4.4 2 X 2 5/8920 520C921T350AC2B 134 4.2 1 3/8 X 4 1/8970 520C971T350EB2B 131 4.5 1 3/4 X 3 1/8

1100 520C112T350AD2B 115 4.8 1 3/8 X 4 5/81200 520C122T350AE2B 101 5.3 1 3/8 X 5 1/81200 520C122T350BB2B 107 5.4 2 X 3 1/81300 520C132T350EJ2B 102 5.3 1 3/4 X 3 5/81400 520C142T350AF2B 90.2 5.8 1 3/8 X 5 5/81500 520C152T350EC2B 83.9 6.2 1 3/4 X 4 1/81500 520C152T350CH2B 91.3 6.3 2 1/2 X 2 5/81600 520C162T350BJ2B 83.2 6.4 2 X 3 5/81800 520C182T350ED2B 71.2 7.0 1 3/4 X 4 5/82000 520C202T350CB2B 64.0 8.0 2 1/2 X 3 1/82100 520C212T350EE2B 62.0 7.7 1 3/4 X 5 1/82200 520C222T350BC2B 68.4 7.4 2 X 4 1/82300 520C232T350BD2B 58.1 8.3 2 X 4 5/82400 520C242T350EF2B 55.0 8.5 1 3/4 X 5 5/82600 520C262T350BE2B 50.7 9.2 2 X 5 1/82600 520C262T350CJ2B 51.0 9.4 2 1/2 X 3 5/83000 520C302T350BF2B 45.0 10.1 2 X 5 5/83100 520C312T350DB2B 56.6 9.5 3 X 3 1/83200 520C322T350CC2B 41.9 10.8 2 1/2 X 4 1/83800 520C382T350CD2B 35.7 12.1 2 1/2 X 4 5/84000 520C402T350DJ2B 43.8 11.3 3 X 3 5/8

4400 520C442T350CD2B 31.1 13.5 2 1/2 X 5 1/84800 520C482T350DC2B 36.5 12.9 3 X 4 1/84900 520C492T350CF2B 27.6 14.7 2 1/2 X 5 5/85700 520C572T350DD2B 31.0 14.5 3 X 4 5/86600 520C662T350DE2B 27.1 16.1 3 X 5 1/86800 520C682T350FC2B 31.4 15.3 3 1/2 X 4 1/87500 520C752T350DF2B 24.1 17.5 3 X 5 5/87900 520C792T350DP2B 22.8 18.3 3 X 5 7/88000 520C802T350FD2B 27.0 17.1 3 1/2 X 4 5/89200 520C922T350FE2B 23.6 18.9 3 1/2 X 5 1/8

10000 520C103T350FF2B 21.0 20.6 3 1/2 X 5 5/810000 520C103T350FF2B 21.0 20.6 3 1/2 X 5 5/811000 520C113T350FP2B 19.9 21.4 3 1/2 X 5 7/813000 520C133T350DG2B 14.9 25.5 3 X 8 5/815000 520C153T350FN2B 15.7 26.7 3 1/2 X 7 5/818000 520C183T350FG2B 13.0 29.7 3 1/2 X 8 5/8

400 Vdc (450 Vdc Surge)150 520C151T400AK2B 685 1.3 1 3/8 X 1 5/8250 520C251T400AA2B 429 1.9 1 3/8 X 2 1/8350 520C351T400AH2B 286 2.5 1 3/8 X 2 5/8370 520C371T400EA2B 199 3.2 1 3/4 X 2 1/8470 520C471T400AB2B 215 3.0 1 3/8 X 3 1/8470 520C471T400BA2B 188 3.5 2 X 2 1/8530 520C531T400EH2B 182 3.6 1 3/4 X 2 5/8590 520C591T400AJ2B 173 3.6 1 3/8 X 3 5/8670 520C671T400BH2B 149 4.3 2 X 2 5/8710 520C711T400AC2B 149 4.0 1 3/8 X 4 1/8740 520C741T400EB2B 141 4.3 1 3/4 X 3 1/8820 520C821T400AD2B 124 4.6 1 3/8 X 4 5/8940 520C941T400AE2B 109 5.1 1 3/8 X 5 1/8940 520C941T400BB2B 114 5.2 2 X 3 1/8950 520C951T400EJ2B 110 5.1 1 3/4 X 3 5/8

1100 520C112T400AF2B 97.1 5.6 1 3/8 X 5 5/81100 520C112T400CH2B 97.8 6.1 2 1/2 X 2 5/81200 520C122T400EC2B 97.8 5.7 1 3/4 X 4 1/81200 520C122T400BJ2B 89.2 6.2 2 X 3 5/81400 520C142T400ED2B 76.5 6.7 1 3/4 X 4 5/81600 520C162T400EE2B 66.6 7.5 1 3/4 X 5 1/81600 520C162T400CB2B 68.6 7.7 2 1/2 X 3 1/81700 520C172T400BC2B 73.3 7.1 2 X 4 1/81700 520C172T400BD2B 62.3 8.1 2 X 4 5/81800 520C182T400EF2B 59.0 8.2 1 3/4 X 5 5/82000 520C202T400BE2B 54.3 8.9 2 X 5 1/82000 520C202T400CJ2B 54.6 9.1 2 1/2 X 3 5/82300 520C232T400BF2B 48.2 9.8 2 X 5 5/82400 520C242T400CC2B 44.9 10.4 2 1/2 X 4 1/82400 520C242T400DB2B 60.4 9.2 3 X 3 1/82900 520C292T400CD2B 47.1 10.6 2 1/2 X 4 5/83000 520C302T400DJ2B 47.1 10.9 3 X 3 5/83300 520C332T400CD2B 33.0 13.0 2 1/2 X 5 1/83700 520C372T400DC2B 38.8 12.5 3 X 4 1/83800 520C382T400CF2B 33.0 13.5 2 1/2 X 5 5/84400 520C442T400DD2B 29.5 14.9 3 X 4 5/85000 520C502T400DE2B 28.8 15.6 3 X 5 1/85200 520C522T400FC2B 33.5 14.8 3 1/2 X 4 1/85700 520C572T400DF2B 25.6 17.0 3 X 5 5/86100 520C612T400DP2B 24.3 17.7 3 X 5 7/86100 520C612T400FD2B 28.8 16.6 3 1/2 X 4 5/87000 520C702T400FE2B 25.1 18.3 3 1/2 X 5 1/88000 520C802T400FF2B 22.3 20.0 3 1/2 X 5 5/8






CORNELLDUBILIER


Aluminum

Screw Term

inalCom

puter Grade

Ratings


8400 520C842T400DN2B 19.1 22.2 3 X 7 5/88500 520C852T400FP2B 21.1 20.8 3 1/2 X 5 7/89800 520C982T400DG2B 15.8 24.8 3 X 8 5/8

12000 520C123T400FN2B 16.6 25.9 3 1/2 X 7 5/814000 520C143T400FG2B 13.8 28.8 3 1/2 X 8 5/8

450 Vdc (500 Vdc Surge)120 520C121T450AK2B 831 1.2 1 3/8 X 1 5/8210 520C211T450AA2B 460 1.8 1 3/8 X 2 1/8290 520C291T450AH2B 344 2.2 1 3/8 X 2 5/8300 520C301T450EA2B 347 2.4 1 3/4 X 2 1/8390 520C391T450AB2B 258 2.8 1 3/8 X 3 1/8390 520C391T450BA2B 240 3.1 2 X 2 1/8440 520C441T450EH2B 224 3.2 1 3/4 X 2 5/8490 520C491T450AJ2B 207 3.2 1 3/8 X 3 5/8550 520C551T450BH2B 187 3.8 2 X 2 5/8580 520C581T450AC2B 173 3.7 1 3/8 X 4 1/8610 520C611T450EB2B 173 3.9 1 3/4 X 3 1/8680 520C681T450AD2B 149 4.2 1 3/8 X 4 5/8780 520C781T450AE2B 131 4.6 1 3/8 X 5 1/8780 520C781T450BB2B 134 4.8 2 X 3 1/8790 520C791T450EJ2B 135 4.6 1 3/4 X 3 5/8870 520C871T450AF2B 146 4.6 1 3/8 X 5 5/8920 520C921T450CH2B 114 5.6 2 1/2 X 2 5/8960 520C961T450EC2B 111 5.4 1 3/4 X 4 1/8

1000 520C102T450BJ2B 104 5.7 2 X 3 5/81100 520C112T450ED2B 94.2 6.1 1 3/4 X 4 5/81300 520C132T450EE2B 82.0 6.7 1 3/4 X 5 1/81300 520C132T450CB2B 81.9 7.0 2 1/2 X 3 1/81400 520C142T450BC2B 82.1 6.7 2 X 4 1/81400 520C142T450BD2B 71.4 7.5 2 X 4 5/81500 520C152T450EF2B 72.7 7.4 1 3/4 X 5 5/81600 520C162T450CJ2B 63.5 8.4 2 1/2 X 3 5/81700 520C172T450BE2B 63.5 8.3 2 X 5 1/81900 520C192T450BF2B 53.4 9.3 2 X 5 5/81900 520C192T450DB2B 52.6 9.8 3 X 3 1/82000 520C202T450CC2B 49.8 9.9 2 1/2 X 4 1/82400 520C242T450CD2B 42.3 11.1 2 1/2 X 4 5/82500 520C252T450DJ2B 40.3 11.8 3 X 3 5/82700 520C272T450CD2B 38.9 12.0 2 1/2 X 5 1/83100 520C312T450CF2B 32.7 13.5 2 1/2 X 5 5/83100 520C312T450DC2B 33.0 13.6 3 X 4 1/83600 520C362T450DD2B 27.8 15.3 3 X 4 5/84200 520C422T450DE2B 23.9 17.1 3 X 5 1/84300 520C432T450FC2B 23.9 17.5 3 1/2 X 4 1/84700 520C472T450DF2B 21.3 18.7 3 X 5 5/85000 520C502T450DP2B 20.0 19.5 3 X 5 7/85000 520C502T450FD2B 20.0 19.9 3 1/2 X 4 5/85800 520C582T450FE2B 17.6 21.8 3 1/2 X 5 1/86600 520C662T450FF2B 15.1 24.2 3 1/2 X 5 5/87000 520C702T450FP2B 14.3 25.2 3 1/2 X 5 7/87000 520C702T450DN2B 15.0 25.0 3 X 7 5/88100 520C812T450DG2B 12.5 27.9 3 X 8 5/89500 520C952T450FN2D 11.0 32.0 3 1/2 X 7 5/8

11000 520C113T450FG2D 9.1 35.5 3 1/2 X 8 5/8500 Vdc (550 Vdc Surge)

84 520C840T500AK2B 1310 1.0 1 3/8 X 1 5/8140 520C141T500AA2B 773 1.4 1 3/8 X 2 1/8200 520C201T500AH2B 547 1.8 1 3/8 X 2 5/8210 520C211T500EA2B 531 1.9 1 3/4 X 2 1/8270 520C271T500AB2B 411 2.2 1 3/8 X 3 1/8270 520C271T500BA2B 389 2.5 2 X 2 1/8

300 520C301T500EH2B 370 2.5 1 3/4 X 2 5/8340 520C341T500AJ2B 329 2.6 1 3/8 X 3 5/8380 520C381T500BH2B 271 3.2 2 X 2 5/8400 520C401T500AC2B 275 3.0 1 3/8 X 4 1/8420 520C421T500EB2B 264 3.1 1 3/4 X 3 1/8470 520C471T500AD2B 236 3.3 1 3/8 X 4 5/8540 520C541T500AE2B 207 3.7 1 3/8 X 5 1/8540 520C541T500BB2B 194 4.0 2 X 3 1/8550 520C551T500EJ2B 200 3.8 1 3/4 X 3 5/8610 520C611T500AF2B 230 3.6 1 3/8 X 5 5/8630 520C631T500CH2B 165 4.7 2 1/2 X 2 5/8670 520C671T500EC2B 164 4.4 1 3/4 X 4 1/8690 520C691T500BJ2B 151 4.8 2 X 3 5/8790 520C791T500ED2B 139 5.0 1 3/4 X 4 5/8840 520C841T500BC2B 124 5.5 2 X 4 1/8890 520C891T500CB2B 118 5.9 2 1/2 X 3 1/8910 520C911T500EE2B 121 5.5 1 3/4 X 5 1/8

1000 520C102T500EF2B 110 6.0 1 3/4 X 5 5/81000 520C102T500BD2B 105 6.2 2 X 4 5/81100 520C112T500CJ2B 91.9 7.0 2 1/2 X 3 5/81200 520C122T500BE2B 91.4 6.9 2 X 5 1/81300 520C132T500BF2B 80.9 7.6 2 X 5 5/81300 520C132T500DB2B 77.1 8.1 3 X 3 1/81400 520C142T500CC2B 73.1 8.2 2 1/2 X 4 1/81600 520C162T500CD2B 63.2 9.1 2 1/2 X 4 5/81700 520C172T500DJ2B 60.1 9.7 3 X 3 5/81900 520C192T500CD2B 54.9 10.1 2 1/2 X 5 1/82100 520C212T500DC2B 49.4 11.1 3 X 4 1/82200 520C222T500CF2B 46.2 11.4 2 1/2 X 5 5/82500 520C252T500DD2B 42.0 12.5 3 X 4 5/82900 520C292T500DE2B 36.5 13.8 3 X 5 1/83000 520C302T500FC2B 35.7 14.4 3 1/2 X 4 1/83300 520C332T500DF2B 32.4 15.1 3 X 5 5/83500 520C352T500DP2B 30.6 15.8 3 X 5 7/83500 520C352T500FD2B 30.3 16.1 3 1/2 X 4 5/84000 520C402T500FE2B 26.4 17.8 3 1/2 X 5 1/84600 520C462T500FF2B 23.4 19.5 3 1/2 X 5 5/84800 520C482T500FP2B 22.2 20.3 3 1/2 X 5 7/84800 520C482T500DN2B 23.9 19.8 3 X 7 5/85600 520C562T500DG2B 19.7 22.2 3 X 8 5/86700 520C672T500FN2B 17.3 25.4 3 1/2 X 7 5/87800 520C782T500FG2B 14.2 28.4 3 1/2 X 8 5/8





Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER




Capacitance Tolerance: 10 + 50%DC Leakage Current: 3 CV A (4 mA max)

Cold Impedance: 20 C multiple of 25 C Z 3Ripple Current Multipliers: Ambient Temperature

Frequency50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz

& up

1 3/8” to 2 1/2” Diameters:200 to 350 V 0.77 0.82 1.00 1.21 1.32 1.37 1.38400 to 500 V 0.73 0.78 1.00 1.33 1.53 1.66 1.68


EIA Ripple Life: 10,000 h at full load at 85 °C per EIA IS-749 Capacitance ±20%ESR 200% of limitDCL 100% of limit

Shelf Life Test: 500 h at 105 °C, capacitance, ESR and DCL, initial requirements.Vibration: 10 to 55 Hz, 0.06” and 10 g. max, 1.5 h ea. of 2 axis

Ultra-Ripple, Long-life, Inverter GradeThe Ultimate in Ripple and LifeType 550C is the standard for motor drive and other high-ripple, long-life applications. It boasts more than 25% extraripple capability per can size, but less capacitance thanType 520C. Expected operating life is more than 100,000hours in typical applications. (See Operating Life, page 2.037)

Type 550C is rated for 10,000 hours life with full ripplecurrent, rated voltage, 85 C and 100 lfm airflow whilemounted horizontally. Horizontal mounting is more severethan vertical mounting. The extended cathode foil of the550C assures heat flow from the capacitor element to the canin all orientations.

Highlights New, 10,000 hour load life Ripple current to 105 amps ESRs to 7 mΩ

Type 550C, 105 °C Ultra-Ripple, Long-life, Inverter Grade, Aluminum

45 °C 55 °C 65 °C 75 °C 85 °C 95 C 105 C1.66 1.52 1.37 1.20 1.00 0.75 0.36

low Vdc Type 101Cp 2.040

Type 125p 2.049hot

MOREFType 520Cp 2.028



Terminal Dimensions

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Type 550C, 105 C Ultra-Ripple, Long-Life Inverter Grade, Aluminum

Outline Drawings Case DimensionsUninsulated Case Dimensions

For insulated case, add 0.024” (0.610 mm) to “D” and 0.030” (0.762 mm) to height.

Diam. (D) Length (L) Terminals (S) TypicalCase .031 .78 .062 1.57 0.015 .78 WeightCode Inches mm Inches mm Inches mm oz g


Stud Dimensions


+0-.062

(+0-1.57)

AK 1.375 34.93 1.625 41.28 0.500 12.70 1.9 54AA 1.375 34.93 2.125 53.98 0.500 12.70 2.0 57AH 1.375 34.93 2.625 66.68 0.500 12.70 2.7 77AB 1.375 34.93 3.125 79.38 0.500 12.70 3.3 94AJ 1.375 34.93 3.625 92.08 0.500 12.70 3.8 108AC 1.375 34.93 4.125 104.78 0.500 12.70 4.4 125AD 1.375 34.93 4.625 117.48 0.500 12.70 5.1 145AE 1.375 34.93 5.125 130.18 0.500 12.70 6.8 193AF 1.375 34.93 5.625 142.88 0.500 12.70 8.1 230EA 1.750 44.45 2.125 53.98 0.750 19.05 2.7 76EH 1.750 44.45 2.625 66.68 0.750 19.05 3.8 108EB 1.750 44.45 3.125 79.38 0.750 19.05 5.1 145EJ 1.750 44.45 3.625 92.08 0.750 19.05 6.8 193EC 1.750 44.45 4.125 104.78 0.750 19.05 8.1 230ED 1.750 44.45 4.625 117.48 0.750 19.05 9.0 255EE 1.750 44.45 5.125 130.18 0.750 19.05 9.5 269EF 1.750 44.45 5.625 142.88 0.750 19.05 10.5 298BA 2.000 50.80 2.125 53.98 0.875 22.23 5.4 153BH 2.000 50.80 2.625 66.68 0.875 22.23 6.1 173BB 2.000 50.80 3.125 79.38 0.875 22.23 6.8 193BJ 2.000 50.80 3.625 92.08 0.875 22.23 8.2 232BC 2.000 50.80 4.125 104.78 0.875 22.23 9.5 269BD 2.000 50.80 4.625 117.48 0.875 22.23 10.3 292BE 2.000 50.80 5.125 130.18 0.875 22.23 10.7 303BF 2.000 50.80 5.625 142.88 0.875 22.23 13.0 369CH 2.500 63.50 2.625 66.68 1.125 28.58 9.2 261CB 2.500 63.50 3.125 79.38 1.125 28.58 10.4 295CJ 2.500 63.50 3.625 92.08 1.125 28.58 12.7 361CC 2.500 63.50 4.125 104.78 1.125 28.58 15.0 425CD 2.500 63.50 4.625 117.48 1.125 28.58 17.2 488CE 2.500 63.50 5.125 130.18 1.125 28.58 19.3 547CF 2.500 63.50 5.625 142.88 1.125 28.58 21.4 607DJ 3.000 76.20 3.625 92.08 1.250 31.75 20.0 567DC 3.000 76.20 4.125 104.78 1.250 31.75 22.2 629DD 3.000 76.20 4.625 117.48 1.250 31.75 25.5 723DE 3.000 76.20 5.125 130.18 1.250 31.75 30.0 850DF 3.000 76.20 5.625 142.88 1.250 31.75 31.9 904DP 3.000 76.20 5.875 149.23 1.250 31.75 32.8 931DN 3.000 76.20 7.625 193.68 1.250 31.75 39.5 1119DG 3.000 76.20 8.625 219.08 1.250 31.75 43.3 1227FC 3.500 88.90 4.125 104.78 1.250 31.75 30.0 850FD 3.500 88.90 4.625 117.48 1.250 31.75 34.4 976FE 3.500 88.90 5.125 130.18 1.250 31.75 40.5 1148FF 3.500 88.90 5.625 142.88 1.250 31.75 43.1 1221FP 3.500 88.90 5.875 149.23 1.250 31.75 44.3 1257FN 3.500 88.90 7.625 193.68 1.250 31.75 53.3 1512FG 3.500 88.90 8.625 219.08 1.250 31.75 58.5 1658

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Type 550C, 105 °C Ultra-Ripple, Long-Life, Inverter Grade, Aluminum


Part Numbering System550 812 T 450 FG 2 D S

Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style812 = 8100 F M = 20% 200 = 200 Vdc 0 = None A = Low Post Blank =

U = 10%+75% 1 = Polyester B = High Post StandardT = 10%+50% 2 = PVC D = High Current, Can

Low Post S = StudE = High Current, Bottom

High Post P = Stud withF = M5 Post thermal

pad

ESR vs. Temperature and Frequency5000 F 200 V

Capacitance vs. Temperature and Frequency5000 F 200 V

Capacitance vs. Temperature and Frequency4700 F 400 V

ESR vs. Temperature and Frequency4700 F 400 V


Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Type 550C, 105 °C Ultra-Ripple, Long-Life, Inverter Grade, Aluminum


Ratings


1200 550C122T200AB2B 88.5 5.1 1 3/8 X 3 1/81200 550C122T200EA2B 87.9 5.2 1 3/4 X 2 1/81200 550C122T200BA2B 86.0 5.7 2 X 2 1/81400 550C142T200EH2B 72.0 6.2 1 3/4 X 2 5/81500 550C152T200AJ2B 70.3 6.1 1 3/8 X 3 5/81800 550C182T200AC2B 58.5 7.0 1 3/8 X 4 1/81800 550C182T200BH2B 60.2 7.4 2 X 2 5/81900 550C192T200EB2B 53.1 7.7 1 3/4 X 3 1/82100 550C212T200AD2B 50.2 7.9 1 3/8 X 4 5/82400 550C242T200AE2B 44.1 8.8 1 3/8 X 5 1/82400 550C242T200EJ2B 42.2 9.1 1 3/4 X 3 5/82500 550C252T200BB2B 43.3 9.2 2 X 3 1/82700 550C272T200AF2B 39.4 9.6 1 3/8 X 5 5/82800 550C282T200CH2B 39.1 10.5 2 1/2 X 2 5/83000 550C302T200EC2B 35.1 10.4 1 3/4 X 4 1/83200 550C322T200BJ2B 34.0 11.0 2 X 3 5/83500 550C352T200ED2B 30.2 11.7 1 3/4 X 4 5/83900 550C392T200BC2B 28.1 12.6 2 X 4 1/84000 550C402T200EE2B 26.6 13.0 1 3/4 X 5 1/84000 550C402T200CB2B 28.1 13.2 2 1/2 X 3 1/84500 550C452T200EF2B 23.8 14.2 1 3/4 X 5 5/84600 550C462T200BD2B 24.0 14.2 2 X 4 5/85100 550C512T200CJ2B 22.0 15.6 2 1/2 X 3 5/85300 550C532T200BE2B 21.1 15.7 2 X 5 1/85700 550C572T200DB2B 23.4 16.1 3 X 3 1/86100 550C612T200BF2B 18.9 17.2 2 X 5 5/86200 550C622T200CC2B 17.8 18.1 2 1/2 X 4 1/87300 550C732T200CD2B 15.2 20.3 2 1/2 X 4 5/87300 550C732T200DJ2B 18.3 19.1 3 X 3 5/88500 550C852T200CE2B 13.4 22.5 2 1/2 X 5 1/89000 550C902T200DC2B 15.2 21.9 3 X 4 1/89600 550C962T200CF2B 11.9 24.5 2 1/2 X 5 5/8

11000 550C113T200DD2B 13.0 24.5 3 X 4 5/812000 550C123T200DE2B 11.5 27.0 3 X 5 1/813000 550C133T200FC2B 15.5 23.8 3 1/2 X 4 1/814000 550C143T200DF2B 10.3 29.4 3 X 5 5/815000 550C153T200DP2D 9.8 30.6 3 X 5 7/816000 550C163T200FD2B 13.2 26.8 3 1/2 X 4 5/8

18000 550C183T200FE2B 11.7 29.4 3 1/2 X 5 1/820000 550C203T200FF2D 10.5 31.9 3 1/2 X 5 5/821000 550C213T200DN2D 8.2 36.8 3 X 7 5/822000 550C223T200FP2D 10.0 33.2 3 1/2 X 5 7/824000 550C243T200DG2D 7.1 40.4 3 X 8 5/830000 550C303T200FN2D 8.0 40.6 3 1/2 X 7 5/835000 550C353T200FG2D 6.8 44.9 3 1/2X 8 5/8

250 Vdc (300 Vdc Surge)280 550C281T250AK2B 339 2.1 1 3/8 X 1 5/8510 550C511T250AA2B 186 3.1 1 3/8 X 2 1/8620 550C621T250AH2B 153 3.7 1 3/8 X 2 5/8850 550C851T250AB2B 113 4.6 1 3/8 X 3 1/8850 550C851T250EA2B 120 4.5 1 3/4 X 2 1/8910 550C911T250BA2B 117 4.9 2 X 2 1/8

1000 550C102T250EH2B 101 5.3 1 3/4 X 2 5/81100 550C112T250AJ2B 89.3 5.4 1 3/8 X 3 5/81300 550C132T250AC2B 74.1 6.2 1 3/8 X 4 1/81300 550C132T250BH2B 82.1 6.3 2 X 2 5/81400 550C142T250EB2B 71.3 6.6 1 3/4 X 3 1/81500 550C152T250AD2B 63.5 7.0 1 3/8 X 4 5/81800 550C182T250AE2B 55.0 7.8 1 3/8 X 5 1/81800 550C182T250EJ2B 55.9 7.9 1 3/4 X 3 5/81800 550C182T250BB2B 59.0 7.9 2 X 3 1/82000 550C202T250AF2B 49.7 8.5 1 3/8 X 5 5/82100 550C212T250CH2B 50.5 9.3 2 1/2 X 2 5/82200 550C222T250EC2B 45.8 9.1 1 3/4 X 4 1/82400 550C242T250BJ2B 45.3 9.5 2 X 3 5/82600 550C262T250ED2B 39.3 10.3 1 3/4 X 4 5/82900 550C292T250EE2B 34.5 11.4 1 3/4 X 5 1/82900 550C292T250BC2B 37.4 10.9 2 X 4 1/82900 550C292T250CB2B 36.9 11.5 2 1/2 X 3 1/83300 550C332T250EF2B 30.8 12.4 1 3/4 X 5 5/83400 550C342T250BD2B 31.9 12.3 2 X 4 5/83700 550C372T250CJ2B 28.7 13.7 2 1/2 X 3 5/83900 550C392T250BE2B 27.9 13.6 2 X 5 1/84200 550C422T250DB2B 28.9 14.5 3 X 3 1/84500 550C452T250BF2B 24.9 14.9 2 X 5 5/84600 550C462T250CC2B 23.4 15.8 2 1/2 X 4 1/85400 550C542T250CD2B 19.9 17.8 2 1/2 X 4 5/85400 550C542T250DJ2B 22.3 17.3 3 X 3 5/86200 550C622T250CE2B 17.1 19.9 2 1/2 X 5 1/86600 550C662T250DC2B 18.5 19.9 3 X 4 1/8





Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Ratings


260 550C261T350AA2B 414 2.1 1 3/8 X 2 1/8390 550C391T350AH2B 284 2.7 1 3/8 X 2 5/8400 550C401T350EA2B 281 2.9 1 3/4 X 2 1/8510 550C511T350BA2B 209 3.7 2 X 2 1/8520 550C521T350AB2B 213 3.3 1 3/8 X 3 1/8570 550C571T350EH2B 196 3.8 1 3/4 X 2 5/8640 550C641T350AJ2B 175 3.9 1 3/8 X 3 5/8740 550C741T350BH2B 146 4.7 2 X 2 5/8770 550C771T350AC2B 146 4.4 1 3/8 X 4 1/8800 550C801T350EB2B 141 4.7 1 3/4 X 3 1/8900 550C901T350AD2B 123 5.0 1 3/8 X 4 5/8

1000 550C102T350AE2B 111 5.5 1 3/8 X 5 1/81000 550C102T350EJ2B 110 5.6 1 3/4 X 3 5/81000 550C102T350BB2B 105 5.9 2 X 3 1/81200 550C122T350AF2B 93.1 6.2 1 3/8 X 5 5/81300 550C132T350EC2B 86.0 6.7 1 3/4 X 4 1/81300 550C132T350BJ2B 81.7 7.1 2 X 3 5/81300 550C132T350CH2B 86.7 7.1 2 1/2 X 2 5/81500 550C152T350ED2B 74.9 7.4 1 3/4 X 4 5/81600 550C162T350BC2B 67.2 8.2 2 X 4 1/81700 550C172T350EE2B 65.3 8.3 1 3/4 X 5 1/81800 550C182T350CB2B 62.1 8.8 2 1/2 X 3 1/81900 550C192T350EF2B 58.0 9.1 1 3/4 X 5 5/81900 550C192T350BD2B 57.3 9.2 2 X 4 5/82200 550C222T350BE2B 50.0 10.2 2 X 5 1/82300 550C232T350CJ2B 48.5 10.5 2 1/2 X 3 5/82500 550C252T350BF2B 44.4 11.2 2 X 5 5/82800 550C282T350CC2B 40.0 12.1 2 1/2 X 4 1/82800 550C282T350DB2B 41.2 12.2 3 X 3 1/83300 550C332T350CD2B 34.0 13.6 2 1/2 X 4 5/83600 550C362T350DJ2B 32.2 14.5 3 X 3 5/83800 550C382T350CE2B 29.7 15.1 2 1/2 X 5 1/84300 550C432T350CF2B 25.8 16.7 2 1/2 X 5 5/84400 550C442T350DC2B 26.6 16.6 3 X 4 1/85100 550C512T350DD2B 22.7 18.6 3 X 4 5/85800 550C582T350FC2B 20.5 20.8 3 1/2 X 4 1/85900 550C592T350DE2B 19.8 20.6 3 X 5 1/86700 550C672T350DF2B 17.7 22.4 3 X 5 5/86900 550C692T350FD2B 17.5 23.3 3 1/2 X 4 5/87100 550C712T350DP2B 16.8 23.3 3 X 5 7/88000 550C802T350FE2B 15.3 25.7 3 1/2 X 5 1/89000 550C902T350FF2B 13.2 28.4 3 1/2 X 5 5/89500 550C952T350FP2B 12.5 29.6 3 1/2 X 5 7/89600 550C962T350DN2D 13.3 29.0 3 X 7 5/8

11000 550C113T350DG2D 11.1 32.3 3 X 8 5/813000 550C133T350FN2D 9.9 36.6 3 1/2 X 7 5/815000 550C153T350FG2D 8.3 40.7 3 1/2 X 8 5/8

400 Vdc (450 Vdc Surge)130 550C131T400AK2B 733 1.4 1 3/8 X 1 5/8200 550C201T400AA2B 458 2.0 1 3/8 X 2 1/8300 550C301T400AH2B 328 2.5 1 3/8 X 2 5/8310 550C311T400EA2B 310 2.8 1 3/4 X 2 1/8400 550C401T400AB2B 241 3.1 1 3/8 X 3 1/8400 550C401T400BA2B 247 3.4 2 X 2 1/8450 550C451T400EH2B 216 3.6 1 3/4 X 2 5/8510 550C511T400AJ2B 194 3.7 1 3/8 X 3 5/8580 550C581T400BH2B 168 4.4 2 X 2 5/8610 550C611T400AC2B 162 4.2 1 3/8 X 4 1/8630 550C631T400EB2B 155 4.5 1 3/4 X 3 1/8710 550C711T400AD2B 139 4.7 1 3/8 X 4 5/8800 550C801T400EJ2B 121 5.4 1 3/4 X 3 5/8810 550C811T400AE2B 122 5.3 1 3/8 X 5 1/8810 550C811T400BB2B 121 5.5 2 X 3 1/8910 550C911T400AF2B 109 5.8 1 3/8 X 5 5/8980 550C981T400EC2B 99.3 6.2 1 3/4 X 4 1/8





7100 550C712T250CF2B 15.2 21.7 2 1/2 X 5 5/87800 550C782T250DD2B 15.8 22.3 3 X 4 5/89000 550C902T250DE2B 13.9 24.6 3 X 5 1/89700 550C972T250FC2B 16.5 23.1 3 1/2 X 4 1/8

10000 550C103T250DF2B 12.4 26.8 3 X 5 5/811000 550C113T250DP2B 11.4 28.2 3 X 5 7/811000 550C113T250FD2B 14.3 25.8 3 1/2 X 4 5/813000 550C133T250FE2B 12.5 28.4 3 1/2 X 5 1/815000 550C153T250DN2D 9.4 34.4 3 X 7 5/815000 550C153T250FF2D 11.0 31.2 3 1/2 X 5 5/816000 550C163T250FP2D 10.5 32.3 3 1/2 X 5 7/817000 550C173T250DG2D 7.9 38.3 3 X 8 5/822000 550C223T250FN2D 8.5 39.5 3 1/2 X 7 5/825000 550C253T250FG2D 7.2 43.7 3 1/2X 8 5/8

300 Vdc (350 Vdc Surge)200 550C201T300AK2B 591 1.6 1 3/8 X 1 5/8320 550C321T300AA2B 378 2.2 1 3/8 X 2 1/8480 550C481T300AH2B 254 2.9 1 3/8 X 2 5/8490 550C491T300EA2B 252 3.1 1 3/4 X 2 1/8640 550C641T300AB2B 190 3.5 1 3/8 X 3 1/8640 550C641T300BA2B 188 3.9 2 X 2 1/8710 550C711T300EH2B 176 4.0 1 3/4 X 2 5/8800 550C801T300AJ2B 156 4.1 1 3/8 X 3 5/8910 550C911T300BH2B 131 5.0 2 X 2 5/8960 550C961T300AC2B 131 4.7 1 3/8 X 4 1/8990 550C991T300EB2B 126 5.0 1 3/4 X 3 1/8

1100 550C112T300AD2B 110 5.3 1 3/8 X 4 5/81300 550C132T300AE2B 96.9 5.9 1 3/8 X 5 1/81300 550C132T300EJ2B 96.2 6.0 1 3/4 X 3 5/81300 550C132T300BB2B 94.2 6.3 2 X 3 1/81400 550C142T300AF2B 83.4 6.6 1 3/8 X 5 5/81600 550C162T300EC2B 77.2 7.0 1 3/4 X 4 1/81600 550C162T300BJ2B 73.7 7.5 2 X 3 5/81600 550C162T300CH2B 78.2 7.4 2 1/2 X 2 5/81800 550C182T300ED2B 67.3 7.8 1 3/4 X 4 5/82000 550C202T300BC2B 60.7 8.6 2 X 4 1/82100 550C212T300EE2B 58.7 8.7 1 3/4 X 5 1/82200 550C222T300CB2B 56.1 9.3 2 1/2 X 3 1/82400 550C242T300EF2B 52.2 9.6 1 3/4 X 5 5/82400 550C242T300BD2B 51.7 9.7 2 X 4 5/82700 550C272T300BE2B 45.1 10.7 2 X 5 1/82800 550C282T300CJ2B 43.8 11.1 2 1/2 X 3 5/83100 550C312T300BF2B 40.2 11.8 2 X 5 5/83400 550C342T300DB2B 37.7 12.7 3 X 3 1/83500 550C352T300CC2B 35.9 12.8 2 1/2 X 4 1/84100 550C412T300CD2B 30.6 14.4 2 1/2 X 4 5/84400 550C442T300DJ2B 29.5 15.1 3 X 3 5/84700 550C472T300CE2B 26.7 15.9 2 1/2 X 5 1/85300 550C532T300CF2B 23.4 17.5 2 1/2 X 5 5/85400 550C542T300DC2B 24.4 17.3 3 X 4 1/86400 550C642T300DD2B 20.8 19.4 3 X 4 5/87200 550C722T300FC2B 18.8 21.7 3 1/2 X 4 1/87400 550C742T300DE2B 18.2 21.5 3 X 5 1/88300 550C832T300DF2B 16.2 23.4 3 X 5 5/88600 550C862T300FD2B 16.0 24.3 3 1/2 X 4 5/88800 550C882T300DP2B 15.4 24.3 3 X 5 7/89900 550C992T300FE2B 14.0 26.8 3 1/2 X 5 1/8

11000 550C113T300FF2B 12.1 29.6 3 1/2 X 5 5/812000 550C123T300FP2D 11.5 30.8 3 1/2 X 5 7/812000 550C123T300DN2D 12.4 30.0 3 X 7 5/814000 550C143T300DG2D 10.5 33.3 3 X 8 5/816000 550C163T300FN2D 9.2 38.1 3 1/2 X 7 5/818000 550C183T300FG2D 7.7 42.3 3 1/2X 8 5/8

350 Vdc (400 Vdc Surge)160 550C161T350AK2B 662 1.5 1 3/8 X 1 5/8

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings


2400 550C242T450CF2B 30.5 15.3 2 1/2 X 5 5/82400 550C242T450DC2B 30.6 15.5 3 X 4 1/82900 550C292T450DD2B 26.1 17.4 3 X 4 5/83200 550C322T450FC2B 22.9 19.6 3 1/2 X 4 1/83300 550C332T450DE2B 22.7 19.2 3 X 5 1/83700 550C372T450DF2B 20.2 20.9 3 X 5 5/83800 550C382T450FD2B 19.5 22.1 3 1/2 X 4 5/84000 550C402T450DP2B 19.2 21.8 3 X 5 7/84400 550C442T450FE2B 17.0 24.3 3 1/2 X 5 1/85000 550C502T450FF2B 15.1 26.5 3 1/2 X 5 5/85300 550C532T450FP2B 14.3 27.6 3 1/2 X 5 7/85500 550C552T450DN2B 15.5 26.8 3 X 7 5/86400 550C642T450DG2B 13.1 29.8 3 X 8 5/87100 550C712T450FN2D 11.3 34.3 3 1/2 X 7 5/88100 550C812T450FG2D 9.5 38.2 3 1/2 X 8 5/8

500 Vdc (550 Vdc Surge)91 550C910U500AK2B 1482.2 1.0 1 3/8 X 1 5/8

150 550C151U500AA2B 865.7 1.4 1 3/8 X 2 1/8220 550C221U500AH2B 612.3 1.8 1 3/8 X 2 5/8230 550C231U500EA2B 609.4 2.0 1 3/4 X 2 1/8290 550C291U500BA2B 463.9 2.5 2 X 2 1/8290 550C291U500AB2B 459.7 2.3 1 3/8 X 3 1/8330 550C331U500EH2B 424.5 2.6 1 3/4 X 2 5/8360 550C361U500AJ2B 368.3 2.7 1 3/8 X 3 5/8410 550C411U500BH2B 323.3 3.2 2 X 2 5/8430 550C431U500AC2B 307.4 3.1 1 3/8 X 4 1/8460 550C461U500EB2B 303.7 3.2 1 3/4 X 3 1/8510 550C511U500AD2B 263.9 3.4 1 3/8 X 4 5/8580 550C581U500BB2B 231.3 4.0 2 X 3 1/8580 550C581U500AE2B 231.4 3.8 1 3/8 X 5 1/8590 550C591U500EJ2B 236.6 3.8 1 3/4 X 3 5/8650 550C651U500AF2B 206.2 4.2 1 3/8 X 5 5/8680 550C681U500CH2B 196.9 4.7 2 1/2 X 2 5/8720 550C721U500EC2B 193.9 4.4 1 3/4 X 4 1/8740 550C741U500BJ2B 180.3 4.8 2 X 3 5/8850 550C851U500ED2B 164.5 5.0 1 3/4 X 4 5/8910 550C911U500BC2B 155.6 5.4 2 X 4 1/8960 550C961U500CB2B 140.8 5.9 2 1/2 X 3 1/8980 550C981U500EE2B 142.9 5.6 1 3/4 X 5 1/8

1100 550C112U500BD2B 122.8 6.3 2 X 4 5/81100 550C112U500EF2B 126.4 6.1 1 3/4 X 5 5/81200 550C122U500CJ2B 109.1 7.0 2 1/2 X 3 5/81200 550C122U500BE2B 109.1 6.9 2 X 5 1/81400 550C142U500DB2B 86.2 8.4 3 X 3 1/81400 550C142U500BF2B 91.5 7.8 2 X 5 5/81500 550C152U500CC2B 85.3 8.3 2 1/2 X 4 1/81800 550C182U500CD2B 72.4 9.3 2 1/2 X 4 5/81900 550C192U500DJ2B 66.0 10.1 3 X 3 5/82000 550C202U500CE2B 66.4 10.1 2 1/2 X 5 1/82300 550C232U500DC2B 53.9 11.6 3 X 4 1/82300 550C232U500CF2B 55.7 11.4 2 1/2 X 5 5/82700 550C272U500DD2B 45.2 13.2 3 X 4 5/83100 550C312U500DE2B 38.9 14.7 3 X 5 1/83200 550C322U500FC2B 38.8 15.1 3 1/2 X 4 1/83500 550C352U500DF2B 34.5 16.1 3 X 5 5/83700 550C372U500DP2B 32.4 16.8 3 X 5 7/83800 550C382U500FD2B 32.3 17.1 3 1/2 X 4 5/84300 550C432U500FE2B 28.4 18.8 3 1/2 X 5 1/84900 550C492U500FF2B 24.3 20.9 3 1/2 X 5 5/85200 550C522U500FP2B 23.0 21.8 3 1/2 X 5 7/85400 550C542U500DN2B 26.1 20.9 3 X 7 5/86000 550C602U500DG2B 19.7 24.2 3 X 8 5/87000 550C702U500FN2B 17.0 27.9 3 1/2 X 7 5/88400 550C842U500FG2B 14.3 31.0 3 1/2 X 8 5/8

990 550C991T400CH2B 95.2 6.7 2 1/2 X 2 5/81000 550C102T400BJ2B 94.2 6.6 2 X 3 5/81200 550C122T400ED2B 82.5 7.1 1 3/4 X 4 5/81300 550C132T400EE2B 71.9 7.9 1 3/4 X 5 1/81300 550C132T400BC2B 77.4 7.6 2 X 4 1/81400 550C142T400CB2B 68.2 8.4 2 1/2 X 3 1/81500 550C152T400EF2B 63.8 8.6 1 3/4 X 5 5/81500 550C152T400BD2B 64.3 8.7 2 X 4 5/81700 550C172T400BE2B 57.5 9.5 2 X 5 1/81800 550C182T400CJ2B 53.2 10.0 2 1/2 X 3 5/82000 550C202T400BF2B 48.6 10.7 2 X 5 5/82200 550C222T400CC2B 43.8 11.6 2 1/2 X 4 1/82200 550C222T400DB2B 45.7 11.6 3 X 3 1/82600 550C262T400CD2B 37.3 13.0 2 1/2 X 4 5/82800 550C282T400DJ2B 35.7 13.7 3 X 3 5/83000 550C302T400CE2B 32.5 14.4 2 1/2 X 5 1/83400 550C342T400CF2B 28.9 15.8 2 1/2 X 5 5/83400 550C342T400DC2B 29.3 15.8 3 X 4 1/84000 550C402T400DD2B 25.0 17.7 3 X 4 5/84600 550C462T400FC2B 22.2 20.0 3 1/2 4 1/84700 550C472T400DE2B 21.4 19.8 3 X 5 1/85300 550C532T400DF2B 19.0 21.6 3 X 5 5/85400 550C542T400FD2B 18.9 22.4 3 1/2 X 4 5/85600 550C562T400DP2B 18.1 22.4 3 X 5 7/86200 550C622T400FE2B 16.5 24.7 3 1/2 X 5 1/87100 550C712T400FF2B 14.3 27.3 3 1/2 X 5 5/87500 550C752T400FP2B 13.5 28.4 3 1/2 X 5 7/87800 550C782T400DN2D 14.6 27.6 3 X 7 5/89000 550C902T400DG2D 12.4 30.6 3 X 8 5/89700 550C972T400FN2D 10.9 34.9 3 1/2 X 7 5/8

11000 550C113T400FG2D 9.2 38.7 3 1/2X 8 5/8450 Vdc (500 Vdc Surge)

90 550C900T450AK2B 827 1.3 1 3/8 X 1 5/8140 550C141T450AA2B 521 1.8 1 3/8 X 2 1/8210 550C211T450AH2B 353 2.4 1 3/8 X 2 5/8220 550C221T450EA2B 333 2.7 1 3/4 X 2 1/8280 550C281T450BA2B 265 3.3 2 X 2 1/8290 550C291T450AB2B 260 3.0 1 3/8 X 3 1/8320 550C321T450EH2B 232 3.5 1 3/4 X 2 5/8360 550C361T450AJ2B 208 3.5 1 3/8 X 3 5/8410 550C411T450BH2B 180 4.3 2 X 2 5/8430 550C431T450AC2B 174 4.1 1 3/8 X 4 1/8440 550C441T450EB2B 166 4.3 1 3/4 X 3 1/8500 550C501T450AD2B 150 4.6 1 3/8 X 4 5/8570 550C571T450AE2B 132 5.1 1 3/8 X 5 1/8570 550C571T450EJ2B 130 5.2 1 3/4 X 3 5/8570 550C571T450BB2B 129 5.3 2 X 3 1/8640 550C641T450AF2B 118 5.6 1 3/8 X 5 5/8700 550C701T450EC2B 107 6.0 1 3/4 X 4 1/8700 550C701T450CH2B 108 6.3 2 1/2 X 2 5/8740 550C741T450BJ2B 101 6.4 2 X 3 5/8820 550C821T450ED2B 90.7 6.8 1 3/4 X 4 5/8900 550C901T450BC2B 82.9 7.3 2 X 4 1/8950 550C951T450EE2B 77.1 7.6 1 3/4 X 5 1/8980 550C981T450CB2B 77.3 7.9 2 1/2 X 3 1/8

1100 550C112T450EF2B 68.4 8.3 1 3/4 X 5 5/81100 550C112T450BD2B 68.8 8.4 2 X 4 5/81200 550C122T450BE2B 61.5 9.2 2 X 5 1/81300 550C132T450CJ2B 57.3 9.7 2 1/2 X 3 5/81400 550C142T450BF2B 53.3 10.2 2 X 5 5/81500 550C152T450CC2B 49.6 10.9 2 1/2 X 4 1/81500 550C152T450DB2B 47.4 11.3 3 X 3 1/81800 550C182T450CD2B 42.2 12.2 2 1/2 X 4 5/82000 550C202T450DJ2B 37.0 13.5 3 X 3 5/82100 550C212T450CE2B 34.9 13.9 2 1/2 X 5 1/8





Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up

1 3/8” & 1 3/4” Diameters7.5 to 150 V 0.91 0.93 1.00 1.06 1.08 1.09 1.09200 & 250 V 0.82 0.86 1.00 1.14 1.20 1.23 1.23

2” & 2 1/2” Diameters7.5 to 150 V 0.92 0.94 1.00 1.05 1.07 1.08 1.08200 & 250 V 0.82 0.86 1.00 1.14 1.20 1.23 1.27

3” Diameter7.5 to 150 V 0.95 0.96 1.00 1.03 1.04 1.05 1.05200 & 250 V 0.85 0.88 1.00 1.11 1.15 1.18 1.18

Load Life: 5,000 h at full load @ 85 °C per EIA IS-749 Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life Test: 500 h at 105 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 1.5 h ea. of 2 axis

Type 101C, 55 °C to 105 °C Low-ESR, Wide-Temperature Grade




CORNELLDUBILIER


SpecificationsOperating Temperature: 55 °C to 105 °C

Rated Voltage: 7.5 to 250 VdcCapacitance: 290 F to 1.5 F

Capacitance Tolerance: 7.5 to 150 Vdc: 10 + 75%, 200 & 250 Vdc; 10 +50%DC Leakage Current: 1.5 CV A, 4 mA max, 5 minutes

Cold Impedance: 55 °C multiple of 25 °C Z 3Ripple Current Multipliers: Ambient Temperature

The Ultimate in Cold Performance and ESRThe Type 101C is the wide-temperature, low voltage versionof the Type 550C. It is ideal for high-ripple current militaryand industrial applications that need full performance to40 C and solid performance to 55 C. It also excels as apower-supply output capacitor because of its exceptionallylow ESR. The extended cathode foil of the 101C assuresheat flow from the capacitor element to the can in allmounting orientations.

Highlights New, 5,000 hour load life Ripple Current to > 100 amps @ 55°C ESRs to 2.5 mΩ >90% capacitance at 40 C Thermal-Pak extended cathode construction

45 °C 55 °C 65 °C 75 °C 85 °C 95 C 105 C1.66 1.52 1.37 1.20 1.00 0.75 0.36

F

ripple

Type 125p 2.049

Type 125p 2.049

hotMORE520C

p 2.028


Low Post A 0.314” (8.0) 0.094” (2.39) 10-32 13⁄8 to 3High Post B 0.314” (8.0) 0.281” (7.14) 10-32 13⁄8 to 3High Current, High Post D 0.434” (11.0) 0.19” (7.14) 1⁄4-28 21⁄2 to 31⁄2

Terminal Dimensions

Aluminum

Screw Term

inalCom

puter GradeType 101C, 55 °C to 105 C Low-ESR, Wide-Temperature Grade


CORNELLDUBILIER


Outline Drawings


Diam. (D) Length (L) Terminals (S)Case .031 .78 .062 1.57 0.015 .38 Typical Weight

Code Inches mm Inches mm Inches mm oz g


Case Dimensions

Stud Dimensions


+0-.062

(+0-1.57)

AK 1.375 34.93 1.625 41.28 0.500 12.70 1.9 54AA 1.375 34.93 2.125 53.98 0.500 12.70 2.0 57AH 1.375 34.93 2.625 66.68 0.500 12.70 2.7 77AB 1.375 34.93 3.125 79.38 0.500 12.70 3.3 94AJ 1.375 34.93 3.625 92.08 0.500 12.70 3.8 108AC 1.375 34.93 4.125 104.78 0.500 12.70 4.4 125AD 1.375 34.93 4.625 117.48 0.500 12.70 5.1 145AE 1.375 34.93 5.125 130.18 0.500 12.70 6.8 193AF 1.375 34.93 5.625 142.88 0.500 12.70 8.1 230EA 1.750 44.45 2.125 53.98 0.750 19.05 2.7 76EH 1.750 44.45 2.625 66.68 0.750 19.05 3.8 108EB 1.750 44.45 3.125 79.38 0.750 19.05 5.1 145EJ 1.750 44.45 3.625 92.08 0.750 19.05 6.8 193EC 1.750 44.45 4.125 104.78 0.750 19.05 8.1 230ED 1.750 44.45 4.625 117.48 0.750 19.05 9.0 255EE 1.750 44.45 5.125 130.18 0.750 19.05 9.5 269EF 1.750 44.45 5.625 142.88 0.750 19.05 10.5 298BA 2.000 50.80 2.125 53.98 0.875 22.23 5.4 153BH 2.000 50.80 2.625 66.68 0.875 22.23 6.1 173BB 2.000 50.80 3.125 79.38 0.875 22.23 6.8 193BJ 2.000 50.80 3.625 92.08 0.875 22.23 8.2 232BC 2.000 50.80 4.125 104.78 0.875 22.23 9.5 269BD 2.000 50.80 4.625 117.48 0.875 22.23 10.3 292BE 2.000 50.80 5.125 130.18 0.875 22.23 10.7 303BF 2.000 50.80 5.625 142.88 0.875 22.23 13.0 369CH 2.500 63.50 2.625 66.68 1.125 28.58 9.2 261CB 2.500 63.50 3.125 79.38 1.125 28.58 10.4 295CJ 2.500 63.50 3.625 92.08 1.125 28.58 12.7 361CC 2.500 63.50 4.125 104.78 1.125 28.58 15.0 425CD 2.500 63.50 4.625 117.48 1.125 28.58 17.2 488CE 2.500 63.50 5.125 130.18 1.125 28.58 19.3 547CF 2.500 63.50 5.625 142.88 1.125 28.58 21.4 607DJ 3.000 76.20 3.625 92.08 1.250 31.75 20.0 567DC 3.000 76.20 4.125 104.78 1.250 31.75 22.2 629DD 3.000 76.20 4.625 117.48 1.250 31.75 25.5 723DE 3.000 76.20 5.125 130.18 1.250 31.75 30.0 850DF 3.000 76.20 5.625 142.88 1.250 31.75 31.9 904DP 3.000 76.20 5.875 149.23 1.250 31.75 32.8 931DN 3.000 76.20 7.625 193.68 1.250 31.75 39.5 1119DG 3.000 76.20 8.625 219.08 1.250 31.75 43.3 1227

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de

Part Numbering System101C 183 T 250 DG 2 D S

Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style100 = 10 F M = 20% 7R5 = 7.5 Vdc 0 = None A = Low Post Blank =101 = 100 F U = 10%+75% 063 = 63 Vdc 1 = Polyester B = High Post Standard183 = 18,000 F T =10%+50% 100 = 100 Vdc 2 = PVC D = High Current Can

S = StudBottom

P = Stud withthermalpad

Type 101C, 55 °C to 105 C Low-ESR, Wide-Temperature Grade




CORNELLDUBILIER




Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings






7.5 Vdc (10 Vdc Surge)28000 101C283U7R5AK2B 38.2 6.1 1 3/8 X 1 5/847000 101C473U7R5AA2B 25.0 8.7 1 3/8 X 2 1/866000 101C663U7R5AH2B 19.0 11.4 1 3/8 X 2 5/879000 101C793U7R5BA2B 18.3 14.0 2 X 2 1/884000 101C843U7R5EA2B 22.6 11.6 1 3/4 X 2 1/884000 101C843U7R5AB2B 15.4 13.8 1 3/8 X 3 1/8

100000 101C104U7R5AJ2B 13.2 15.9 1 3/8 X 3 5/8120000 101C124U7R5EH2B 16.5 14.7 1 3/4 X 2 5/8120000 101C124U7R5BH2B 12.4 18.3 2 X 2 5/8120000 101C124U7R5AC2B 12.1 17.4 1 3/8 X 4 1/8140000 101C144U7R5AD2B 10.8 19.2 1 3/8 X 4 5/8160000 101C164U7R5EB2B 13.2 17.5 1 3/4 X 3 1/8160000 101C164U7R5AE2B 9.9 20.9 1 3/8 X 5 1/8170000 101C174U7R5BB2B 8.5 23.6 2 X 3 1/8180000 101C184U7R5AF2B 9.1 22.6 1 3/8 X 5 5/8200000 101C204U7R5EJ2B 11.1 20.1 1 3/4 X 3 5/8210000 101C214U7R5CH2B 9.4 24.2 2 1/2 X 2 5/8220000 101C224U7R5EC2B 8.2 24.4 1 3/4 X 4 1/8220000 101C224U7R5BJ2B 7.6 26.2 2 X 3 5/8260000 101C264U7R5BC2D 6.0 31.0 2 X 4 1/8270000 101C274U7R5ED2B 8.7 24.7 1 3/4 X 4 5/8280000 101C284U7R5CB2B 7.2 29.4 2 1/2 X 3 1/8300000 101C304U7R5BD2D 5.7 32.9 2 X 4 5/8310000 101C314U7R5EE2B 7.9 26.8 1 3/4 X 5 1/8350000 101C354U7R5EF2B 7.4 28.8 1 3/4 X 5 5/8350000 101C354U7R5BE2D 5.2 35.9 2 X 5 1/8360000 101C364U7R5CJ2D 5.9 34.2 2 1/2 X 3 5/8390000 101C394U7R5DB2D 7.1 33.1 3 X 3 1/8390000 101C394U7R5BF2D 4.9 38.2 2 X 5 5/8430000 101C434U7R5CC2D 4.2 42.4 2 1/2 X 4 1/8490000 101C494U7R5DJ2D 5.8 38.5 3 X 3 5/8490000 101C494U7R5CD2D 4.4 42.8 2 1/2 X 4 5/8570000 101C574U7R5CE2D 4.0 46.7 2 1/2 X 5 1/8610000 101C614U7R5DC2D 4.6 45.2 3 X 4 1/8640000 101C644U7R5CF2D 3.4 52.1 2 1/2 X 5 5/8700000 101C704U7R5DD2D 4.0 50.0 3 X 4 5/8810000 101C814U7R5DE2D 3.7 53.6 3 X 5 1/8910000 101C914U7R5DF2D 3.4 57.8 3 X 5 5/8960000 101C964U7R5DP2D 3.4 58.8 3 X 5 7/8

1300000 101C135U7R5DN2D 2.8 70.2 3 X 7 5/81500000 101C155U7R5DG2D 2.5 76.4 3 X 8 5/8

10 Vdc (15 Vdc Surge)25000 101C253U010AK2B 36.0 6.2 1 3/8 X 1 5/841000 101C413U010AA2B 23.9 8.9 1 3/8 X 2 1/858000 101C583U010AH2B 18.1 11.7 1 3/8 X 2 5/868000 101C683U010BA2B 17.8 14.2 2 X 2 1/869000 101C693U010EA2B 22.8 11.6 1 3/4 X 2 1/874000 101C743U010AB2B 14.6 14.2 1 3/8 X 3 1/889000 101C893U010AJ2B 12.5 16.4 1 3/8 X 3 5/899000 101C993U010EH2B 16.6 14.6 1 3/4 X 2 5/8

110000 101C114U010BH2B 12.1 18.6 2 X 2 5/8110000 101C114U010AC2B 11.3 18.1 1 3/8 X 4 1/8120000 101C124U010AD2B 10.3 19.7 1 3/8 X 4 5/8130000 101C134U010EB2B 13.2 17.4 1 3/4 X 3 1/8140000 101C144U010AE2B 9.4 21.4 1 3/8 X 5 1/8150000 101C154U010BB2B 8.1 24.2 2 X 3 1/8160000 101C164U010EJ2B 11.1 20.0 1 3/4 X 3 5/8

160000 101C164U010AF2B 8.7 23.1 1 3/8 X 5 5/8180000 101C184U010CH2B 9.2 24.5 2 1/2 X 2 5/8180000 101C184U010BJ2B 7.4 26.5 2 X 3 5/8190000 101C194U010EC2B 8.2 24.4 1 3/4 X 4 1/8220000 101C224U010ED2B 8.7 24.7 1 3/4 X 4 5/8230000 101C234U010BC2D 5.7 31.7 2 X 4 1/8240000 101C244U010CB2B 7.0 29.7 2 1/2 X 3 1/8250000 101C254U010EE2B 8.0 26.7 1 3/4 X 5 1/8260000 101C264U010BD2D 5.5 33.5 2 X 4 5/8280000 101C284U010EF2B 7.4 28.7 1 3/4 X 5 5/8300000 101C304U010CJ2D 5.7 34.6 2 1/2 X 3 5/8300000 101C304U010BE2D 5.0 36.5 2 X 5 1/8340000 101C344U010BF2D 4.7 38.9 2 X 5 5/8360000 101C364U010DB2D 7.0 33.4 3 X 3 1/8370000 101C374U010CC2D 4.0 43.0 2 1/2 X 4 1/8430000 101C434U010CD2D 4.3 43.5 2 1/2 X 4 5/8450000 101C454U010DJ2D 5.7 38.8 3 X 3 5/8500000 101C504U010CE2D 3.8 47.5 2 1/2 X 5 1/8550000 101C554U010DC2D 4.5 45.5 3 X 4 1/8560000 101C564U010CF2D 3.3 53.0 2 1/2 X 5 5/8640000 101C644U010DD2D 4.0 50.4 3 X 4 5/8740000 101C744U010DE2D 3.7 54.0 3 X 5 1/8840000 101C844U010DF2D 3.3 58.2 3 X 5 5/8880000 101C884U010DP2D 3.3 59.2 3 X 5 7/8

1200000 101C125U010DN2D 2.8 70.7 3 X 7 5/81400000 101C145U010DG2D 2.5 76.9 3 X 8 5/8

16 Vdc (25 Vdc Surge)16000 101C163U016AK2B 39.2 6.0 1 3/8 X 1 5/827000 101C273U016AA2B 26.0 8.5 1 3/8 X 2 1/838000 101C383U016AH2B 20.0 11.1 1 3/8 X 2 5/845000 101C453U016BA2B 19.1 13.7 2 X 2 1/846000 101C463U016EA2B 24.3 11.2 1 3/4 X 2 1/849000 101C493U016AB2B 15.9 13.6 1 3/8 X 3 1/859000 101C593U016AJ2B 13.5 15.7 1 3/8 X 3 5/866000 101C663U016EH2B 17.7 14.2 1 3/4 X 2 5/871000 101C713U016BH2B 13.0 18.0 2 X 2 5/873000 101C733U016AC2B 12.2 17.4 1 3/8 X 4 1/882000 101C823U016AD2B 11.1 19.0 1 3/8 X 4 5/886000 101C863U016EB2B 14.1 16.9 1 3/4 X 3 1/893000 101C933U016AE2B 10.1 20.6 1 3/8 X 5 1/8

100000 101C104U016BB2B 8.6 23.4 2 X 3 1/8110000 101C114U016EJ2B 11.8 19.4 1 3/4 X 3 5/8110000 101C114U016AF2B 9.3 22.3 1 3/8 X 5 5/8120000 101C124U016CH2B 9.8 23.7 2 1/2 X 2 5/8120000 101C124U016BJ2B 8.0 25.7 2 X 3 5/8130000 101C134U016EC2B 8.6 23.8 1 3/4 X 4 1/8150000 101C154U016ED2B 9.2 24.0 1 3/4 X 4 5/8160000 101C164U016CB2B 7.5 28.9 2 1/2 X 3 1/8160000 101C164U016BC2D 6.0 30.9 2 X 4 1/8170000 101C174U016EE2B 8.4 26.0 1 3/4 X 5 1/8170000 101C174U016BD2D 5.9 32.5 2 X 4 5/8190000 101C194U016EF2B 7.8 28.0 1 3/4 X 5 5/8200000 101C204U016CJ2D 6.1 33.6 2 1/2 X 3 5/8200000 101C204U016BE2D 5.3 35.4 2 X 5 1/8230000 101C234U016BF2D 4.9 38.0 2 X 5 5/8240000 101C244U016DB2D 7.3 32.7 3 X 3 1/8250000 101C254U016CC2D 4.3 41.9 2 1/2 X 4 1/8290000 101C294U016CD2D 4.5 42.3 2 1/2 X 4 5/8

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

deType 101C, 55 °C to 105 °C Low-ESR, Wide-Temperature Grade




CORNELLDUBILIER


RatingsESR Max. Ripple Max.@ 25 °C @ 85 °C Nominal Size




300000 101C304U016DJ2D 5.9 38.1 3 X 3 5/8330000 101C334U016CE2D 4.0 46.2 2 1/2 X 5 1/8360000 101C364U016DC2D 4.7 44.6 3 X 4 1/8370000 101C374U016CF2D 3.4 51.6 2 1/2 X 5 5/8430000 101C434U016DD2D 4.1 49.5 3 X 4 5/8490000 101C494U016DE2D 3.8 53.0 3 X 5 1/8560000 101C564U016DF2D 3.5 57.2 3 X 5 5/8590000 101C594U016DP2D 3.4 58.2 3 X 5 7/8800000 101C804U016DN2D 2.9 69.6 3 X 7 5/8920000 101C924U016DG2D 2.6 75.8 3 X 8 5/8

20 Vdc (30 Vdc Surge)13000 101C133U020AK2B 39.2 6.0 1 3/8 X 1 5/821000 101C213U020AA2B 26.0 8.5 1 3/8 X 2 1/829000 101C293U020AH2B 20.0 11.1 1 3/8 X 2 5/834000 101C343U020BA2B 19.1 13.7 2 X 2 1/835000 101C353U020EA2B 24.3 11.2 1 3/4 X 2 1/838000 101C383U020AB2B 15.9 13.6 1 3/8 X 3 1/845000 101C453U020AJ2B 13.5 15.7 1 3/8 X 3 5/850000 101C503U020EH2B 17.7 14.2 1 3/4 X 2 5/854000 101C543U020BH2B 13.0 18.0 2 X 2 5/855000 101C553U020AC2B 12.2 17.4 1 3/8 X 4 1/862000 101C623U020AD2B 11.1 19.0 1 3/8 X 4 5/866000 101C663U020EB2B 14.1 16.9 1 3/4 X 3 1/871000 101C713U020AE2B 10.1 20.6 1 3/8 X 5 1/877000 101C773U020BB2B 8.6 23.4 2 X 3 1/880000 101C803U020AF2B 9.3 22.3 1 3/8 X 5 5/881000 101C813U020EJ2B 11.8 19.4 1 3/4 X 3 5/889000 101C893U020CH2B 9.8 23.7 2 1/2 X 2 5/894000 101C943U020BJ2B 8.0 25.7 2 X 3 5/898000 101C983U020EC2B 8.6 23.8 1 3/4 X 4 1/8

110000 101C114U020ED2B 9.2 24.0 1 3/4 X 4 5/8120000 101C124U020CB2B 7.5 28.9 2 1/2 X 3 1/8120000 101C124U020BC2D 6.0 30.9 2 X 4 1/8130000 101C134U020EE2B 8.4 26.0 1 3/4 X 5 1/8130000 101C134U020BD2D 5.9 32.5 2 X 4 5/8140000 101C144U020EF2B 7.8 28.0 1 3/4 X 5 5/8150000 101C154U020CJ2D 6.1 33.6 2 1/2 X 3 5/8150000 101C154U020BE2D 5.3 35.4 2 X 5 1/8180000 101C184U020DB2D 7.3 32.7 3 X 3 1/8180000 101C184U020BF2D 4.9 38.0 2 X 5 5/8190000 101C194U020CC2D 4.3 41.9 2 1/2 X 4 1/8220000 101C224U020CD2D 4.5 42.3 2 1/2 X 4 5/8230000 101C234U020DJ2D 5.9 38.1 3 X 3 5/8250000 101C254U020CE2D 4.0 46.2 2 1/2 X 5 1/8280000 101C284U020DC2D 4.7 44.6 3 X 4 1/8280000 101C284U020CF2D 3.4 51.6 2 1/2 X 5 5/8330000 101C334U020DD2D 4.1 49.5 3 X 4 5/8380000 101C384U020DE2D 3.8 53.0 3 X 5 1/8420000 101C424U020DF2D 3.5 57.2 3 X 5 5/8450000 101C454U020DP2D 3.4 58.2 3 X 5 7/8610000 101C614U020DN2D 2.9 69.4 3 X 7 5/8710000 101C714U020DG2D 2.6 75.5 3 X 8 5/8


16000 101C163U025AA2B 28.2 8.2 1 3/8 X 2 1/823000 101C233U025AH2B 20.9 10.8 1 3/8 X 2 5/827000 101C273U025EA2B 25.1 11.0 1 3/4 X 2 1/827000 101C273U025BA2B 19.9 13.5 2 X 2 1/8

30000 101C303U025AB2B 16.6 13.3 1 3/8 X 3 1/835000 101C353U025AJ2B 14.2 15.4 1 3/8 X 3 5/839000 101C393U025EH2B 18.3 13.9 1 3/4 X 2 5/842000 101C423U025BH2B 13.5 17.6 2 X 2 5/843000 101C433U025AC2B 12.7 17.0 1 3/8 X 4 1/849000 101C493U025AD2B 11.6 18.6 1 3/8 X 4 5/852000 101C523U025EB2B 14.5 16.6 1 3/4 X 3 1/856000 101C563U025AE2B 10.6 20.2 1 3/8 X 5 1/860000 101C603U025BB2B 9.0 22.9 2 X 3 1/863000 101C633U025AF2B 9.7 21.9 1 3/8 X 5 5/864000 101C643U025EJ2B 12.2 19.1 1 3/4 X 3 5/870000 101C703U025CH2B 10.1 23.3 2 1/2 X 2 5/873000 101C733U025BJ2B 8.3 25.2 2 X 3 5/877000 101C773U025EC2B 9.9 22.2 1 3/4 X 4 1/888000 101C883U025ED2B 9.5 23.6 1 3/4 X 4 5/890000 101C903U025BC2B 6.4 30.0 2 X 4 1/895000 101C953U025CB2B 7.7 28.4 2 1/2 X 3 1/8

100000 101C104U025EE2B 8.6 25.7 1 3/4 X 5 1/8100000 101C104U025BD2D 6.1 31.9 2 X 4 5/8110000 101C114U025EF2B 8.0 27.6 1 3/4 X 5 5/8120000 101C124U025CJ2D 6.3 33.1 2 1/2 X 3 5/8120000 101C124U025BE2D 5.5 34.8 2 X 5 1/8140000 101C144U025DB2D 7.4 32.4 3 X 3 1/8140000 101C144U025BF2D 5.1 37.4 2 X 5 5/8150000 101C154U025CC2D 4.5 40.6 2 1/2 X 4 1/8170000 101C174U025CD2D 4.7 41.6 2 1/2 X 4 5/8180000 101C184U025DJ2D 6.0 37.7 3 X 3 5/8200000 101C204U025CE2D 4.2 45.5 2 1/2 X 5 1/8220000 101C224U025DC2D 4.8 44.1 3 X 4 1/8220000 101C224U025CF2D 3.6 50.3 2 1/2 X 5 5/8260000 101C264U025DD2D 4.5 47.3 3 X 4 5/8290000 101C294U025DE2D 4.0 51.6 3 X 5 1/8330000 101C334U025DF2D 3.5 56.7 3 X 5 5/8350000 101C354U025DP2D 3.5 57.7 3 X 5 7/8480000 101C484U025DN2D 2.9 69.0 3 X 7 5/8550000 101C554U025DG2D 2.6 75.2 3 X 8 5/8


13000 101C133U030AA2B 29.8 8.0 1 3/8 X 2 1/819000 101C193U030AH2B 21.4 10.7 1 3/8 X 2 5/823000 101C233U030EA2B 23.1 11.5 1 3/4 X 2 1/823000 101C233U030BA2B 18.8 13.8 2 X 2 1/824000 101C243U030AB2B 16.0 13.6 1 3/8 X 3 1/830000 101C303U030AJ2B 14.1 15.4 1 3/8 X 3 5/833000 101C333U030EH2B 16.9 14.5 1 3/4 X 2 5/836000 101C363U030AC2B 13.0 16.8 1 3/8 X 4 1/836000 101C363U030BH2B 12.8 18.1 2 X 2 5/841000 101C413U030AD2B 11.6 18.6 1 3/8 X 4 5/844000 101C443U030EB2B 13.4 17.3 1 3/4 X 3 1/847000 101C473U030AE2B 10.6 20.2 1 3/8 X 5 1/849000 101C493U030BB2B 8.7 23.3 2 X 3 1/853000 101C533U030AF2B 9.8 21.8 1 3/8 X 5 5/854000 101C543U030EJ2B 11.3 19.9 1 3/4 X 3 5/859000 101C593U030CH2B 9.3 24.4 2 1/2 X 2 5/862000 101C623U030BJ2B 7.8 25.8 2 X 3 5/864000 101C643U030EC2B 9.2 23.0 1 3/4 X 4 1/875000 101C753U030ED2B 8.4 25.1 1 3/4 X 4 5/875000 101C753U030BC2D 6.3 30.1 2 X 4 1/8

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Ratings


81000 101C813U030CB2B 7.1 29.7 2 1/2 X 3 1/885000 101C853U030EE2B 7.9 26.9 1 3/4 X 5 1/888000 101C883U030BD2D 5.8 32.7 2 X 4 5/895000 101C953U030EF2B 7.5 28.5 1 3/4 X 5 5/8

100000 101C104U030CJ2D 5.7 34.6 2 1/2 X 3 5/8100000 101C104U030BE2D 5.2 35.6 2 X 5 1/8110000 101C114U030BF2D 4.8 38.4 2 X 5 5/8120000 101C124U030DB2D 7.0 33.3 3 X 3 1/8120000 101C124U030CC2D 4.7 40.0 2 1/2 X 4 1/8150000 101C154U030DJ2D 5.7 38.7 3 X 3 5/8150000 101C154U030CD2D 4.3 43.4 2 1/2 X 4 5/8170000 101C174U030CE2D 3.8 47.4 2 1/2 X 5 1/8180000 101C184U030DC2D 4.8 43.9 3 X 4 1/8190000 101C194U030CF2D 3.5 51.2 2 1/2 X 5 5/8220000 101C224U030DD2D 4.3 48.5 3 X 4 5/8250000 101C254U030DE2D 3.8 52.8 3 X 5 1/8280000 101C284U030DF2D 3.5 56.9 3 X 5 5/8300000 101C304U030DP2D 3.4 58.8 3 X 5 7/8410000 101C414U030DN2D 2.9 69.5 3 X 7 5/8470000 101C474U030DG2D 2.6 75.8 3 X 8 5/8


13000 101C133U040AH2B 23.1 10.3 1 3/8 X 2 5/816000 101C163U040EA2B 26.6 10.7 1 3/4 X 2 1/816000 101C163U040BA2B 21.2 13.0 2 X 2 1/817000 101C173U040AB2B 17.3 13.1 1 3/8 X 3 1/821000 101C213U040AJ2B 15.2 14.8 1 3/8 X 3 5/823000 101C233U040EH2B 19.3 13.5 1 3/4 X 2 5/825000 101C253U040BH2B 14.3 17.1 2 X 2 5/825000 101C253U040AC2B 14.0 16.2 1 3/8 X 4 1/829000 101C293U040AD2B 12.4 17.9 1 3/8 X 4 5/830000 101C303U040EB2B 15.4 16.2 1 3/4 X 3 1/833000 101C333U040AE2B 11.3 19.6 1 3/8 X 5 1/834000 101C343U040BB2B 9.8 22.0 2 X 3 1/837000 101C373U040EJ2B 12.9 18.6 1 3/4 X 3 5/837000 101C373U040AF2B 10.4 21.1 1 3/8 X 5 5/841000 101C413U040CH2B 10.7 22.7 2 1/2 X 2 5/843000 101C433U040BJ2B 8.8 24.4 2 X 3 5/845000 101C453U040EC2B 10.5 21.6 1 3/4 X 4 1/852000 101C523U040ED2B 9.5 23.6 1 3/4 X 4 5/852000 101C523U040BC2B 7.1 28.5 2 X 4 1/856000 101C563U040CB2B 8.1 27.6 2 1/2 X 3 1/859000 101C593U040EE2B 8.9 25.4 1 3/4 X 5 1/861000 101C613U040BD2D 6.5 31.0 2 X 4 5/866000 101C663U040EF2B 8.4 26.9 1 3/4 X 5 5/870000 101C703U040BE2D 5.8 33.8 2 X 5 1/871000 101C713U040CJ2D 6.6 32.2 2 1/2 X 3 5/879000 101C793U040BF2D 5.3 36.5 2 X 5 5/883000 101C833U040DB2D 8.6 30.1 3 X 3 1/886000 101C863U040CC2D 5.4 37.3 2 1/2 X 4 1/8

100000 101C104U040CD2D 4.9 40.6 2 1/2 X 4 5/8110000 101C114U040DJ2D 7.0 35.1 3 X 3 5/8120000 101C124U040CE2D 4.4 44.4 2 1/2 X 5 1/8130000 101C134U040DC2D 5.3 41.9 3 X 4 1/8130000 101C134U040CF2D 4.0 48.0 2 1/2 X 5 5/8150000 101C154U040DD2D 5.2 44.0 3 X 4 5/8

170000 101C174U040DE2D 4.6 48.1 3 X 5 1/8190000 101C194U040DF2D 4.2 51.9 3 X 5 5/8210000 101C214U040DP2D 4.0 53.8 3 X 5 7/8280000 101C284U040DN2D 3.4 63.9 3 X 7 5/8330000 101C334U040DG2D 3.0 69.9 3 X 8 5/8


10000 101C103U050AH2B 22.0 10.5 1 3/8 X 2 5/812000 101C123U050EA2B 26.5 10.7 1 3/4 X 2 1/812000 101C123U050BA2B 20.8 13.2 2 X 2 1/813000 101C133U050AB2B 17.5 13.0 1 3/8 X 3 1/816000 101C163U050AJ2B 14.6 15.2 1 3/8 X 3 5/818000 101C183U050EH2B 19.3 13.6 1 3/4 X 2 5/819000 101C193U050BH2B 14.1 17.2 2 X 2 5/819000 101C193U050AC2B 13.4 16.6 1 3/8 X 4 1/822000 101C223U050AD2B 11.9 18.3 1 3/8 X 4 5/824000 101C243U050EB2B 15.3 16.2 1 3/4 X 3 1/825000 101C253U050AE2B 10.8 20.0 1 3/8 X 5 1/827000 101C273U050BB2B 9.6 22.2 2 X 3 1/829000 101C293U050EJ2B 12.8 18.6 1 3/4 X 3 5/829000 101C293U050AF2B 10.0 21.5 1 3/8 X 5 5/832000 101C323U050CH2B 9.6 24.0 2 1/2 X 2 5/834000 101C343U050BJ2B 8.6 24.6 2 X 3 5/835000 101C353U050EC2B 10.5 21.6 1 3/4 X 4 1/840000 101C403U050ED2B 9.5 23.6 1 3/4 X 4 5/841000 101C413U050BC2B 7.2 28.2 2 X 4 1/844000 101C443U050CB2B 8.2 27.6 2 1/2 X 3 1/846000 101C463U050EE2B 8.8 25.4 1 3/4 X 5 1/848000 101C483U050BD2D 6.3 31.2 2 X 4 5/852000 101C523U050EF2B 8.4 27.0 1 3/4 X 5 5/855000 101C553U050CJ2D 6.6 32.2 2 1/2 X 3 5/855000 101C553U050BE2D 5.7 34.1 2 X 5 1/862000 101C623U050BF2D 5.2 36.8 2 X 5 5/865000 101C653U050DB2B 8.9 29.5 3 X 3 1/867000 101C673U050CC2D 5.4 37.3 2 1/2 X 4 1/879000 101C793U050CD2D 4.9 40.5 2 1/2 X 4 5/883000 101C833U050DJ2D 7.3 34.4 3 X 3 5/890000 101C903U050CE2D 4.4 44.3 2 1/2 X 5 1/8

100000 101C104U050DC2D 5.5 41.1 3 X 4 1/8100000 101C104U050CF2D 4.0 47.9 2 1/2 X 5 5/8120000 101C124U050DD2D 5.4 43.2 3 X 4 5/8130000 101C134U050DE2D 4.8 47.2 3 X 5 1/8150000 101C154U050DF2D 4.4 51.0 3 X 5 5/8160000 101C164U050DP2D 4.2 52.9 3 X 5 7/8220000 101C224U050DN2D 3.5 63.0 3 X 7 5/8260000 101C264U050DG2D 3.1 69.0 3 X 8 5/8

63 Vdc (85 Vdc Surge)2800 101C282U063AK2B 57.9 4.9 1 3/8 X 1 5/85000 101C502U063AA2B 35.5 7.3 1 3/8 X 2 1/87200 101C722U063AH2B 25.8 9.8 1 3/8 X 2 5/88800 101C882U063BA2B 22.8 12.6 2 X 2 1/88900 101C892U063EA2B 28.0 10.4 1 3/4 X 2 1/89400 101C942U063AB2B 20.4 12.0 1 3/8 X 3 1/8

12000 101C123U063AJ2B 17.1 14.0 1 3/8 X 3 5/813000 101C133U063EH2B 20.4 13.2 1 3/4 X 2 5/814000 101C143U063BH2B 15.4 16.5 2 X 2 5/8





Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra





CORNELLDUBILIER


Ratings

14000 101C143U063AC2B 14.8 15.8 1 3/8 X 4 1/816000 101C163U063AD2B 13.2 17.4 1 3/8 X 4 5/817000 101C173U063EB2B 16.1 15.8 1 3/4 X 3 1/818000 101C183U063AE2B 12.0 19.0 1 3/8 X 5 1/819000 101C193U063BB2B 10.2 21.5 2 X 3 1/820000 101C203U063AF2B 11.0 20.5 1 3/8 X 5 5/821000 101C213U063EJ2B 13.5 18.2 1 3/4 X 3 5/823000 101C233U063CH2B 11.3 22.1 2 1/2 X 2 5/824000 101C243U063BJ2B 9.6 23.4 2 X 3 5/825000 101C253U063EC2B 11.0 21.1 1 3/4 X 4 1/829000 101C293U063ED2B 10.0 23.0 1 3/4 X 4 5/829000 101C293U063BC2B 8.2 26.4 2 X 4 1/831000 101C313U063CB2B 8.6 26.9 2 1/2 X 3 1/833000 101C333U063EE2B 9.3 24.8 1 3/4 X 5 1/834000 101C343U063BD2B 7.2 29.3 2 X 4 5/837000 101C373U063EF2B 8.8 26.3 1 3/4 X 5 5/839000 101C393U063BE2D 6.5 32.0 2 X 5 1/840000 101C403U063CJ2D 7.0 31.4 2 1/2 X 3 5/844000 101C443U063BF2D 5.9 34.6 2 X 5 5/847000 101C473U063DB2B 9.3 29.0 3 X 3 1/848000 101C483U063CC2D 5.6 36.4 2 1/2 X 4 1/856000 101C563U063CD2D 5.2 39.5 2 1/2 X 4 5/859000 101C593U063DJ2D 7.5 33.8 3 X 3 5/865000 101C653U063CE2D 4.6 43.3 2 1/2 X 5 1/872000 101C723U063DC2D 6.0 39.5 3 X 4 1/873000 101C733U063CF2D 4.2 46.8 2 1/2 X 5 5/884000 101C843U063DD2D 5.6 42.5 3 X 4 5/897000 101C973U063DE2D 5.0 46.5 3 X 5 1/8

110000 101C114U063DF2D 4.5 50.2 3 X 5 5/8120000 101C124U063DP2D 4.3 52.0 3 X 5 7/8160000 101C164U063DN2D 3.6 62.2 3 X 7 5/8180000 101C184U063DG2D 3.2 68.2 3 X 8 5/8

75 Vdc (100 Vdc Surge)2100 101C212U075AK2B 97.3 3.8 1 3/8 X 1 5/83600 101C362U075AA2B 67.2 5.3 1 3/8 X 2 1/85200 101C522U075AH2B 50.0 7.0 1 3/8 X 2 5/86400 101C642U075BA2B 40.7 9.4 2 X 2 1/86500 101C652U075EA2B 47.5 8.0 1 3/4 X 2 1/86800 101C682U075AB2B 39.3 8.7 1 3/8 X 3 1/88400 101C842U075AJ2B 32.5 10.1 1 3/8 X 3 5/89400 101C942U075EH2B 34.2 10.2 1 3/4 X 2 5/8

10000 101C103U075AC2B 27.9 11.5 1 3/8 X 4 1/810000 101C103U075BH2B 27.4 12.4 2 X 2 5/812000 101C123U075EB2B 27.0 12.2 1 3/4 X 3 1/812000 101C123U075AD2B 24.5 12.8 1 3/8 X 4 5/813000 101C133U075AE2B 22.0 14.0 1 3/8 X 5 1/814000 101C143U075BB2B 18.0 16.2 2 X 3 1/815000 101C153U075EJ2B 22.4 14.1 1 3/4 X 3 5/815000 101C153U075AF2B 20.0 15.2 1 3/8 X 5 5/817000 101C173U075CH2B 18.9 17.1 2 1/2 X 2 5/817000 101C173U075BJ2B 16.8 17.7 2 X 3 5/818000 101C183U075EC2B 18.0 16.5 1 3/4 X 4 1/821000 101C213U075ED2B 16.2 18.1 1 3/4 X 4 5/821000 101C213U075BC2B 12.7 21.2 2 X 4 1/823000 101C233U075CB2B 14.3 20.8 2 1/2 X 3 1/824000 101C243U075EE2B 14.8 19.6 1 3/4 X 5 1/825000 101C253U075BD2B 12.3 22.4 2 X 4 5/827000 101C273U075EF2B 13.9 20.9 1 3/4 X 5 5/8

28000 101C283U075BE2B 11.0 24.6 2 X 5 1/829000 101C293U075CJ2B 11.5 24.4 2 1/2 X 3 5/832000 101C323U075BF2B 9.9 26.7 2 X 5 5/834000 101C343U075DB2B 13.3 24.2 3 X 3 1/835000 101C353U075CC2B 8.7 29.4 2 1/2 X 4 1/841000 101C413U075CD2D 8.4 30.9 2 1/2 X 4 5/843000 101C433U075DJ2B 10.8 28.2 3 X 3 5/847000 101C473U075CE2D 7.5 34.0 2 1/2 X 5 1/852000 101C523U075DC2D 7.6 35.0 3 X 4 1/853000 101C533U075CF2D 6.7 36.9 2 1/2 X 5 5/861000 101C613U075DD2D 7.9 35.7 3 X 4 5/870000 101C703U075DE2D 6.1 42.0 3 X 5 1/879000 101C793U075DF2D 6.0 43.5 3 X 5 5/883000 101C833U075DP2D 5.7 45.1 3 X 5 7/8

110000 101C114U075DN2D 4.7 54.7 3 X 7 5/8130000 101C134U075DG2D 4.1 60.3 3 X 8 5/8

100 Vdc (150 Vdc Surge)1300 101C132U100AK2B 116 3.5 1 3/8 X 1 5/82300 101C232U100AA2B 79.9 4.9 1 3/8 X 2 1/83400 101C342U100AH2B 59.4 6.4 1 3/8 X 2 5/84100 101C412U100BA2B 47.6 8.7 2 X 2 1/84200 101C422U100EA2B 55.0 7.4 1 3/4 X 2 1/84400 101C442U100AB2B 46.6 8.0 1 3/8 X 3 1/85400 101C542U100AJ2B 38.5 9.3 1 3/8 X 3 5/86100 101C612U100EH2B 39.6 9.5 1 3/4 X 2 5/86500 101C652U100AC2B 32.9 10.6 1 3/8 X 4 1/86500 101C652U100BH2B 32.0 11.4 2 X 2 5/87500 101C752U100AD2B 28.9 11.8 1 3/8 X 4 5/87900 101C792U100EB2B 31.1 11.4 1 3/4 X 3 1/88500 101C852U100AE2B 25.8 12.9 1 3/8 X 5 1/88900 101C892U100BB2B 21.0 15.0 2 X 3 1/89600 101C962U100AF2B 23.4 14.1 1 3/8 X 5 5/89800 101C982U100EJ2B 25.8 13.2 1 3/4 X 3 5/8

11000 101C113U100CH2B 20.7 16.3 2 1/2 X 2 5/811000 101C113U100BJ2B 19.5 16.4 2 X 3 5/812000 101C123U100EC2B 20.7 15.4 1 3/4 X 4 1/814000 101C143U100ED2B 18.6 16.9 1 3/4 X 4 5/814000 101C143U100BC2B 14.8 19.7 2 X 4 1/815000 101C153U100EE2B 17.0 18.3 1 3/4 X 5 1/815000 101C153U100CB2B 16.5 19.4 2 1/2 X 3 1/816000 101C163U100BD2B 14.3 20.8 2 X 4 5/817000 101C173U100EF2B 15.9 19.6 1 3/4 X 5 5/818000 101C183U100BE2B 12.7 22.9 2 X 5 1/819000 101C193U100CJ2B 13.3 22.7 2 1/2 X 3 5/821000 101C213U100BF2B 11.4 24.9 2 X 5 5/822000 101C223U100DB2B 13.8 23.8 3 X 3 1/822000 101C223U100CC2B 10.0 27.4 2 1/2 X 4 1/826000 101C263U100CD2B 9.7 28.9 2 1/2 X 4 5/828000 101C283U100DJ2B 11.2 27.7 3 X 3 5/830000 101C303U100CE2D 8.6 31.7 2 1/2 X 5 1/834000 101C343U100DC2D 8.5 33.2 3 X 4 1/834000 101C343U100CF2D 7.7 34.5 2 1/2 X 5 5/839000 101C393U100DD2D 7.9 35.7 3 X 4 5/845000 101C453U100DE2D 6.5 40.5 3 X 5 1/851000 101C513U100DF2D 6.0 43.5 3 X 5 5/854000 101C543U100DP2D 6.0 44.1 3 X 5 7/874000 101C743U100DN2D 4.8 54.0 3 X 7 5/885000 101C853U100DG2D 4.2 59.2 3 X 8 5/8





Aluminum

Screw Term

inalCom

puter GradeType 101C, 55 °C to 105 °C Low-ESR, Wide-Temperature Grade


CORNELLDUBILIER


2800 101C282T200AF2B 71.0 8.1 1 3/8 X 5 5/83100 101C312T200BJ2B 64.2 9.0 2 X 3 5/83400 101C342T200EC2B 58.5 9.1 1 3/4 X 4 1/83500 101C352T200ED2B 56.8 9.7 1 3/4 X 4 5/84000 101C402T200EE2B 49.7 10.7 1 3/4 X 5 1/84000 101C402T200CB2B 49.7 11.2 2 1/2 X 3 1/84000 101C402T200BC2B 43.1 11.5 2 X 4 1/84400 101C442T200BD2B 45.2 11.7 2 X 4 5/84500 101C452T200EF2B 44.2 11.7 1 3/4 X 5 5/85000 101C502T200BE2B 39.8 12.9 2 X 5 1/85100 101C512T200CJ2B 39.0 13.3 2 1/2 X 3 5/86100 101C612T200BF2B 32.6 14.7 2 X 5 5/86500 101C652T200CC2B 26.3 16.9 2 1/2 X 4 1/87200 101C722T200CH2B 27.6 14.1 2 1/2 X 2 5/87200 101C722T200CD2B 27.6 17.1 2 1/2 X 4 5/87600 101C762T200DJ2B 29.7 17.0 3 X 3 5/88300 101C832T200CE2B 24.0 19.0 2 1/2 X 5 1/89300 101C932T200DC2B 21.4 20.9 3 X 4 1/8

10000 101C103T200CF2B 21.2 20.8 2 1/2 X 5 5/811000 101C113T200DD2B 20.5 22.1 3 X 4 5/813000 101C133T200DB2B 17.8 20.9 3 X 3 1/813000 101C133T200DE2B 17.8 24.5 3 X 5 1/814000 101C143T200DF2B 16.9 25.9 3 X 5 5/815000 101C153T200DP2B 15.9 27.1 3 X 5 7/820000 101C203T200DN2D 12.5 33.9 3 X 7 5/823000 101C233T200DG2D 10.4 37.8 3 X 8 5/8

250 Vdc (350 Vdc Surge)290 101C291T250AK2B 549 1.8 1 3/8 X 1 5/8530 101C531T250AA2B 300 2.7 1 3/8 X 2 1/8700 101C701T250EA2B 227 3.7 1 3/4 X 2 1/8760 101C761T250AH2B 209 3.5 1 3/8 X 2 5/8890 101C891T250BA2B 164 4.7 2 X 2 1/8990 101C991T250AB2B 161 4.3 1 3/8 X 3 1/8

1100 101C112T250EH2B 145 5.0 1 3/4 X 2 5/81200 101C122T250AJ2B 133 5.0 1 3/8 X 3 5/81400 101C142T250BH2B 104 6.3 2 X 2 5/81500 101C152T250AC2B 106 5.9 1 3/8 X 4 1/81500 101C152T250EB2B 106 6.2 1 3/4 X 3 1/81700 101C172T250AD2B 101 6.3 1 3/8 X 4 5/81900 101C192T250AE2B 90.7 6.9 1 3/8 X 5 1/81900 101C192T250EJ2B 83.8 7.3 1 3/4 X 3 5/81900 101C192T250BB2B 69.8 8.2 2 X 3 1/82200 101C222T250AF2B 84.4 7.4 1 3/8 X 5 5/82300 101C232T250CH2B 75.0 8.6 2 1/2 X 2 5/82300 101C232T250EC2B 69.2 8.4 1 3/4 X 4 1/82400 101C242T250BJ2B 58.0 9.5 2 X 3 5/82700 101C272T250ED2B 58.9 9.5 1 3/4 X 4 5/82900 101C292T250BC2B 50.3 10.7 2 X 4 1/83100 101C312T250CB2B 55.6 10.6 2 1/2 X 3 1/83100 101C312T250EE2B 51.3 10.5 1 3/4 X 5 1/83400 101C342T250BD2B 45.6 11.7 2 X 4 5/83500 101C352T250EF2B 45.5 11.6 1 3/4 X 5 5/83900 101C392T250BE2B 42.0 12.6 2 X 5 1/84000 101C402T250CJ2B 43.1 12.6 2 1/2 X 3 5/84500 101C452T250BF2B 38.3 13.6 2 X 5 5/84700 101C472T250DB2B 42.3 13.6 3 X 3 1/85100 101C512T250CC2B 30.6 15.6 2 1/2 X 4 1/85700 101C572T250CD2B 28.9 16.7 2 1/2 X 4 5/8

150 Vdc (200 Vdc Surge)490 101C491U150AK2B 433 2.1 1 3/8 X 1 5/8880 101C881U150AA2B 241 3.1 1 3/8 X 2 1/8

1200 101C122U150EA2B 199 3.9 1 3/4 X 2 1/81300 101C132U150AH2B 163 4.0 1 3/8 X 2 5/81500 101C152U150BA2B 159 4.8 2 X 2 1/81700 101C172U150AB2B 125 4.9 1 3/8 X 3 1/81800 101C182U150EH2B 133 5.2 1 3/4 X 2 5/81900 101C192U150AJ2B 112 5.5 1 3/8 X 3 5/82300 101C232U150BH2B 104 6.3 2 X 2 5/82500 101C252U150EB2B 95.5 6.5 1 3/4 X 3 1/82500 101C252U150AC2B 84.9 6.6 1 3/8 X 4 1/82700 101C272U150AD2B 80.1 7.1 1 3/8 X 4 5/83100 101C312U150AE2B 74.0 7.6 1 3/8 X 5 1/83200 101C322U150EJ2B 74.6 7.7 1 3/4 X 3 5/83400 101C342U150BB2B 54.6 9.3 2 X 3 1/83600 101C362U150AF2B 66.3 8.4 1 3/8 X 5 5/83800 101C382U150CH2B 62.8 9.4 2 1/2 X 2 5/84000 101C402U150BJ2B 59.7 9.4 2 X 3 5/84400 101C442U150EC2B 54.3 9.5 1 3/4 X 4 1/84500 101C452U150ED2B 53.1 10.0 1 3/4 X 4 5/85200 101C522U150EE2B 45.9 11.1 1 3/4 X 5 1/85200 101C522U150CB2B 45.9 11.6 2 1/2 X 3 1/85200 101C522U150BC2B 45.0 11.3 2 X 4 1/85700 101C572U150BD2B 41.9 12.2 2 X 4 5/85800 101C582U150EF2B 41.2 12.2 1 3/4 X 5 5/86600 101C662U150BE2B 36.2 13.6 2 X 5 1/86600 101C662U150CJ2B 36.2 13.8 2 1/2 X 3 5/87800 101C782U150DB2B 35.7 14.8 3 X 3 1/87900 101C792U150BF2B 30.2 15.3 2 X 5 5/88500 101C852U150CC2B 28.1 16.3 2 1/2 X 4 1/89400 101C942U150CD2B 25.4 17.8 2 1/2 X 4 5/89900 101C992U150DJ2B 28.1 17.5 3 X 3 5/8

11000 101C113U150CE2B 21.7 19.9 2 1/2 X 5 1/812000 101C123U150DC2B 23.2 20.1 3 X 4 1/813000 101C133U150CF2B 18.4 22.3 2 1/2 X 5 5/814000 101C143U150DD2B 19.9 22.5 3 X 4 5/816000 101C163U150DE2B 17.4 24.8 3 X 5 1/818000 101C183U150DF2B 15.5 27.1 3 X 5 5/819000 101C193U150DP2B 14.7 28.2 3 X 5 7/826000 101C263U150DN2D 11.3 35.7 3 X 7 5/830000 101C303U150DG2D 9.3 40.0 3 X 8 5/8

200 Vdc (275 Vdc Surge)380 101C381T200AK2B 454 2.0 1 3/8 X 1 5/8680 101C681T200AA2B 254 3.0 1 3/8 X 2 1/8890 101C891T200EA2B 224 3.7 1 3/4 X 2 1/8980 101C981T200AH2B 176 3.9 1 3/8 X 2 5/8

1100 101C112T200BA2B 181 4.5 2 X 2 1/81300 101C132T200AB2B 133 4.8 1 3/8 X 3 1/81400 101C142T200EH2B 142 5.0 1 3/4 X 2 5/81600 101C162T200AJ2B 108 5.6 1 3/8 X 3 5/81800 101C182T200BH2B 111 6.1 2 X 2 5/81900 101C192T200EB2B 105 6.2 1 3/4 X 3 1/81900 101C192T200AC2B 88.9 6.4 1 3/8 X 4 1/82200 101C222T200AD2B 90.4 6.7 1 3/8 X 4 5/82400 101C242T200EJ2B 82.9 7.3 1 3/4 X 3 5/82400 101C242T200BB2B 82.9 7.5 2 X 3 1/82500 101C252T200AE2B 79.6 7.4 1 3/8 X 5 1/8

RatingsESR Max. Ripple Max.@ 25 °C @ 85 °C Nominal Size




Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra





CORNELLDUBILIER


Ratings

5900 101C592T250DJ2B 33.7 16.0 3 X 3 5/86500 101C652T250CE2B 26.6 18.0 2 1/2 X 5 1/87200 101C722T250DC2B 27.6 18.4 3 X 4 1/87700 101C772T250CF2B 24.1 19.5 2 1/2 X 5 5/88500 101C852T250DD2B 23.4 20.7 3 X 4 5/89700 101C972T250DE2B 20.5 22.8 3 X 5 1/8

11000 101C113T250DF2B 18.1 25.0 3 X 5 5/812000 101C123T250DP2B 16.6 26.5 3 X 5 7/816000 101C163T250DN2D 13.4 32.8 3 X 7 5/818000 101C183T250DG2D 11.1 36.7 3 X 8 5/8



Aluminum

Screw Term

inalCom

puter GradeType 125, 55 C to 125 C, Ultra-High Temperature, Military Grade


CORNELLDUBILIER


SpecificationsOperating Temperature: 55 °C to 125 °C


Capacitance Tolerance: 10 +75%DC Leakage Current: 0.003 CV A @ 25 C, 0.009 CV @ 125 C

Cold Impedance: 55 °C Multiple of 25 °C Z 2Ripple Current Multipliers: Ambient Temperature

Frequency

50 Hz 60Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up0.85 0.87 1.00 1.10 1.22 1.32 1.33

Load Life: 5,000 h at full load @ 85 °C per EIA IS-749 Capacitance ±20%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h @ 105 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 1.5 h ea. of 2 axis

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.80 1.63 1.45 1.25 1.00 0.87 0.71

Highlights Now 5000 hour load life Ripple Current to 50 amps ESRs to 4 mΩ >90% capacitance at 40 C Operates at 125 C

The Pace-Setter for Long Life and High TemperatureExceeding the requirements of military aluminumelectrolytic large can capacitors, the Type 125 performsin the most demanding filter applications delivering thelongest life and the lowest leakage in low-voltage,aluminum-electrolytic capacitors. It’s the choice foroutput capacitors in high temperature and militarypower supplies.

µFType 101Cp 2.040

VdcType 101C

p 2.040

MORE

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

de




CORNELLDUBILIER


Case Dimensions

Terminal Dimensions


Diam. (D) Length (L) Terminals (S)Case .031 .78 .062 1.57 0.015 .78 Typical WeightCode Inches mm Inches mm Inches mm H max. oz g

AK 1.375 34.93 1.625 41.28 0.500 12.7 See 1.9 54AA 1.375 34.93 2.125 53.98 0.500 12.7 Terminal 2.0 57AH 1.375 34.93 2.625 66.68 0.500 12.7 Dimensions 2.7 77AB 1.375 34.93 3.125 79.38 0.500 12.7 3.3 94AJ 1.375 34.93 3.625 92.08 0.500 12.7 3.8 108AC 1.375 34.93 4.125 104.78 0.500 12.7 4.4 125AD 1.375 34.93 4.625 117.48 0.500 12.7 5.1 145AE 1.375 34.93 5.125 130.18 0.500 12.7 5.7 193AF 1.375 34.93 5.625 142.88 0.500 12.7 6.4 230

Type 125, 55 C to 125 C, Ultra-High Temperature, Military Grade

Outline Drawings

Post Diameter H maxTerminal Style Code inches (mm) inches (mm) Thread

Low Post A 0.313” (8.0) 0.094” (2.39) 10-32High Post B 0.313” (8.0) 0.281” (7.14) 10-32

1.375 0.031(34.93 0.38)

0.50 0.015(12.7 0.78)

+0-.062

(+0-1.57)

Aluminum

Screw Term

inalCom

puter Grade


CORNELLDUBILIER


Type 125, 55 C to 125 C, Ultra-High Temperature, Military Grade

Part Numbering System125 333 U 7R5 AA 1 B

Type Capacitance Tolerance Voltage Case Code Insulation Terminal100 = 10 F U = 10%+75% 6R3 = 6.3 Vdc 0 = None A = Low Post101 = 100 F 063 = 63 Vdc 1 = Polyester B = High Post

100 = 100 Vdc


Impedance vs. Frequency - 14,000 µF 7.5 Vdc Impedance vs. Frequency - 5700 µF 40 Vdc

Alum

inum

Scre

w T

erm

inal

Com

pute

r Gra

deType 125, 55 C to 125 C, Ultra-High Temperature, Military Grade




CORNELLDUBILIER


Ratings

5 Vdc (8 Vdc Surge)

25000 125253U005AK1B 0.028 0.022 10.3 15.5 1 3/8 x 1 5/849000 125493U005AA1B 0.017 0.013 17.2 21.0 1 3/8 x 2 1/865000 125653U005AH1B 0.012 0.010 21.0 25.4 1 3/8 x 2 5/889000 125893U005AB1B 0.010 0.008 24.0 28.5 1 3/8 x 3 1/8

110000 125114U005AJ1B 0.008 0.006 26.1 31.0 1 3/8 x 3 5/8130000 125134U005AC1B 0.007 0.006 28.2 32.9 1 3/8 x 4 1/8150000 125154U005AD1B 0.006 0.005 29.3 34.1 1 3/8 x 4 5/8170000 125174U005AE1B 0.006 0.005 30.6 35.3 1 3/8 x 5 1/8190000 125194U005AF1B 0.005 0.004 30.7 35.1 1 3/8 x 5 5/8


23000 125233U6R3AK1B 0.028 0.022 11.3 15.5 1 3/8 x 1 5/838000 125383U6R3AA1B 0.047 0.013 17.2 21.0 1 3/8 x 2 1/858000 125583U6R3AH1B 0.012 0.009 21.0 25.4 1 3/8 x 2 5/872000 125723U6R3AB1B 0.009 0.008 24.0 28.5 1 3/8 x 3 1/889000 125893U6R3AJ1B 0.008 0.006 26.1 31.0 1 3/8 x 3 5/8

110000 125114U6R3AC1B 0.007 0.006 28.2 32.9 1 3/8 x 4 1/8120000 125124U6R3AD1B 0.006 0.005 29.6 34.0 1 3/8 x 4 5/8140000 125144U6R3AE1B 0.006 0.005 30.6 35.3 1 3/8 x 5 1/8160000 125164U6R3AF1B 0.005 0.004 30.7 35.1 1 3/8 x 5 5/8


20000 125203U7R5AK1B 0.029 0.022 11.8 15.5 1 3/8 x1 5/833000 125333U7R5AA1B 0.017 0.013 16.8 20.9 1 3/8 x 2 1/848000 125483U7R5AH1B 0.013 0.010 20.4 25.2 1 3/8 x 2 5/863000 125633U7R5AB1B 0.010 0.008 23.4 28.5 1 3/8 x 3 1/878000 125783U7R5AJ1B 0.008 0.006 25.7 30.9 1 3/8 x 3 5/893000 125933U7R5AC1B 0.007 0.006 27.5 32.9 1 3/8 x 4 1/8

110000 125114U7R5AD1B 0.006 0.005 28.8 34.0 1 3/8 x 4 5/8120000 125124U7R5AE1B 0.006 0.005 30.2 35.3 1 3/8 x 5 1/8140000 125144U7R5AF1B 0.005 0.004 30.2 35.3 1 3/8 x 5 5/8


13000 125133U12R5AK1B 0.032 0.022 11.6 15.2 1 3/8 x 1 5/822000 125223U12R5AA1B 0.019 0.014 15.7 20.6 1 3/8 x 2 1/832000 125323U12R5AH1B 0.014 0.01 19.2 25.0 1 3/8 x 2 5/841000 125413U12R5AB1B 0.011 0.008 21.9 28.2 1 3/8 x 3 1/851000 125513U12R5AJ1B 0.009 0.007 24.1 30.6 1 3/8 x 3 5/861000 125613U12R5AC1B 0.008 0.006 25.9 32.4 1 3/8 x 4 1/871000 125713U12R5AD1B 0.007 0.005 27.2 33.7 1 3/8 x 4 5/881000 125813U12R5AE1B 0.006 0.005 28.5 35.0 1 3/8 x 5 1/890000 125903U12R5AF1B 0.006 0.004 28.8 34.7 1 3/8 x 5 5/8


10000 125103U015AK1B 0.031 0.021 11.1 14.4 1 3/8 x 1 5/817000 125173U015AA1B 0.019 0.013 15.2 19.5 1 3/8 x 2 1/824000 125243U015AH1B 0.013 0.01 18.6 23.7 1 3/8 x 2 5/832000 125323U015AB1B 0.011 0.008 21.2 26.8 1 3/8 x 3 1/840000 125403U015AJ1B 0.009 0.006 23.4 29.2 1 3/8 x 3 5/847000 125473U015AC1B 0.008 0.005 25.1 31.0 1 3/8 x 4 1/855000 125553U015AD1B 0.007 0.005 26.5 32.3 1 3/8 x 4 5/862000 125623U015AE1B 0.006 0.005 27.8 33.6 1 3/8 x 5 1/870000 125703U015AF1B 0.006 0.004 28.1 33.4 1 3/8 x 5 5/8


7000 125702U020AK1B 0.034 0.022 10.4 14.2 1 3/8 x 1 5/812000 125123U020AA1B 0.020 0.013 14.4 19.3 1 3/8 x 2 1/818000 125183U020AH1B 0.015 0.010 17.5 23.4 1 3/8 x 2 5/824000 125243U020AB1B 0.012 0.008 20.0 26.5 1 3/8 x 3 1/829000 125293U020AJ1B 0.010 0.006 22.1 28.9 1 3/8 x 3 5/835000 125353U020AC1B 0.008 0.006 23.8 30.9 1 3/8 x 4 1/840000 125403U020AD1B 0.007 0.005 25.1 32.0 1 3/8 x 4 5/846000 125463U020AE1B 0.007 0.005 26.5 33.4 1 3/8 x 5 1/851000 125513U020AF1B 0.006 0.004 26.8 33.3 1 3/8 x 5 5/8


5600 125562U025AK1B 0.035 0.022 10.3 14.2 1 3/8 x 1 5/89300 125932U025AA1B 0.021 0.013 14.5 19.2 1 3/8 x 2 1/8

14000 125143U025AH1B 0.015 0.010 17.2 23.3 1 3/8 x 2 5/818000 125183U025AB1B 0.012 0.008 19.7 26.4 1 3/8 x 3 1/822000 125223U025AJ1B 0.010 0.006 21.7 28.8 1 3/8 x 3 5/826000 125263U025AC1B 0.009 0.006 23.5 30.7 1 3/8 x 4 1/830000 125303U025AD1B 0.008 0.005 24.8 32.0 1 3/8 x 4 5/834000 125343U025AE1B 0.007 0.005 26.1 33.3 1 3/8 x 5 1/839000 125393U025AF1B 0.006 0.004 26.4 33.1 1 3/8 x 5 5/8


4000 125402U030AK1B 0.037 0.022 9.9 14.1 1 3/8 x 1 5/87300 125732U030AA1B 0.022 0.013 13.5 19.0 1 3/8 x 2 1/8

11000 125113U030AH1B 0.016 0.01 16.5 23.1 1 3/8 x 2 5/814000 125143U030AB1B 0.013 0.008 18.9 26.2 1 3/8 x 3 1/817000 125173U030AJ1B 0.011 0.007 20.9 28.6 1 3/8 x 3 5/820000 125203U030AC1B 0.009 0.006 22.6 30.5 1 3/8 x 4 1/824000 125243U030AD1B 0.008 0.005 23.8 31.7 1 3/8 x 4 5/827000 125273U030AE1B 0.007 0.005 25.2 33.0 1 3/8 x 5 1/830000 125303U030AF1B 0.007 0.004 25.5 33.0 1 3/8 x 5 5/8


2600 125262U040AK1B 0.040 0.022 9.4 14.0 1 3/8 x 1 5/84600 125462U040AA1B 0.024 0.014 12.8 18.9 1 3/8 x 2 1/86700 125672U040AH1B 0.017 0.010 15.8 22.8 1 3/8 x 2 5/88800 125882U040AB1B 0.014 0.008 18.0 25.9 1 3/8 x 3 1/8

11000 125113U040AJ1B 0.011 0.007 20.0 28.3 1 3/8 x 3 5/813000 125133U040AC1B 0.010 0.006 21.7 30.2 1 3/8 x 4 1/815000 125153U040AD1B 0.009 0.005 22.8 31.4 1 3/8 x 4 5/817000 125173U040AE1B 0.008 0.005 24.3 32.7 1 3/8 x 5 1/819000 125193U040AF1B 0.007 0.004 24.5 32.7 1 3/8 x 5 5/8

ESR Max. Ripple@ 25 °C max @ 85 °C Nominal

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz Size D x LµF Part Number (Ω) (A rms) (inches)

ESR Max. Ripple@ 25 °C max @ 85 °C Nominal

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz Size D x LµF Part Number (Ω) (A rms) (inches)

Aluminum

Screw Term

inalCom

puter GradeMounting Hardware for Screw-Terminal, Computer-Grade Capacitors


CORNELLDUBILIER


Mounting Hardware

Bracket Dimensions

Nylon Nuts for Insulated Stud Mounting

For Stud Standoff Nut Nut Hex MountingNylon Nut Diameter Diameter Diameter Elevation Head Min. Hole Max. Chassis Max. TighteningPart Number (mm) S (mm) W (mm) T (mm) J (mm) Diameter Thickness Torque

(mm) (mm) in. lbs.

M8S17W25 M8 17 25 14 17 17.5 5 25

M12S22W30 M12 22 30 16 19 22.5 5 75

M12S30W38 M12 30 38 16.5 19 30.5 5 75

Dimensions in Inches Dimensions in millimetersFigure Bracket A B C D E F A B C D E F

Number1 115058-06* 1.375 1.813 30° 2.313 .750 .563 34.93 46.04 30° 58.74 19.05 14.301 115058-15* 1.750 2.188 30° 2.625 .750 .560 44.45 55.56 30° 66.68 19.05 14.222 115058-09* 2.000 1.250 75° 1.438 1.125 .750 50.80 31.75 75° 36.51 28.58 19.053 115058-05 2.000 2.563 30° 2.938 1.125 .750 50.80 65.09 30° 76.41 28.58 19.052 115058-14* 2.500 1.500 75° 1.688 1.125 .750 63.50 38.10 75° 42.86 28.58 19.053 115058-10 2.500 3.000 30° 3.438 1.125 .750 63.50 76.20 30° 87.31 28.58 19.052 115058-11* 3.000 1.750 75° 1.938 1.125 .750 76.20 44.45 75° 49.21 28.58 19.053 115058-01 3.000 3.500 30° 3.938 1.125 .750 76.20 88.90 30° 100.01 28.58 19.054 125309-01 3.500 4.488 60° 2.224 .984 – 90.00 114.00 60° 4.70 25.00 –

Note: All mounting brackets and clamps except Figure 4 are zinc plated. Figure 4 is black nylon. When mounting capacitors there is no need to wrap capacitors withprotective wrapping before installing mounting clamp.

* Stock bracket

FIGURE 1 FIGURE 2 FIGURE 3

FIGURE 4 Clamp Dimensions

Clamp Dimensions in InchesNumber A B C D125364-01 1.375 2.125 2.500 1.281125364-05 1.750 2.500 2.875 1.656125364-02 2.000 2.750 3.125 1.906125364-04 2.500 3.250 3.625 2.406125364-03 3.000 3.750 4.125 2.906125364-06 3.500 4.250 4.625 3.481

Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER


SpecificationsOperating Temperature: –40°C to + 85°C <250Vdc

–25°C to + 85°C >350VdcRated Voltage: 160 to 450 Vdc

Capacitance: 82 µF to 3,900 µF ± 20%Leakage Current: ≤ 3 √CV µA, 4 mA max, 5 minutes


Frequency

Load Life: 2000 h at full load at 85 °C Capacitance 10%ESR 125% of limitDCL 100% of limit

EIA Ripple Life: 2000 h at 85 °C, full load per EIA IS-749 °C Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life: 1000 h at 85 °C, capacitance ± 10%, ESR 200% of limit, DCL 100% of limitVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane

Type 380LQ, 85 °C Compact, High-Capacitance Snap-in

Type 380LQ is on average 27% smaller and more than 10mm shorter than Type 380L. This is achieved with a newcan-closure method that permits installing capacitor ele-ments into smaller cans. Approaching the capability of the380L, the new 380LQ enables you to shrink equipment sizeand retain the original performance.

27% Smaller for Same Capacitance

Highlights New, more capacitance per case Compare to Type 380L

45 °C 60 °C 70 °C 85 °C1.5 1.46 1.3 1.0

50 Hz 60 Hz 120 Hz 500 Hz 1 kHz 10 kHz & up

0.95 0.98 1.00 1.20 1.25 1.40ripple

380LXp 2.058

381LQp 2.070

life

temp381LQp 2.070

MORE

Aluminum

Snap-InCapacitors


CORNELLDUBILIER


Outline Drawings


DIAMETER LENGTH Typical DIAMETER LENGTH TypicalCase D L Weight Case D L WeightCode mm inches mm inches (grams) Code mm inches mm inches (grams)H01 22 0.87 25 0.98 16 K01 30 1.18 25 0.98 30H02 22 0.87 30 1.18 19 K02 30 1.18 30 1.18 35H03 22 0.87 35 1.38 22 K03 30 1.18 35 1.38 40H04 22 0.87 40 1.57 24 K04 30 1.18 40 1.57 44H45 22 0.87 45 1.77 28 K45 30 1.18 45 1.77 49H05 22 0.87 50 1.97 31 K05 30 1.18 50 1.97 53

J01 25 0.98 25 0.98 20 A01 35 1.38 25 0.98 42J02 25 0.98 30 1.18 24 A02 35 1.38 30 1.18 48J03 25 0.98 35 1.38 27 A03 35 1.38 35 1.38 54J04 25 0.98 40 1.57 31 A04 35 1.38 40 1.57 60J45 25 0.98 45 1.77 35 A45 35 1.38 45 1.77 67J05 25 0.98 50 1.97 38 A05 35 1.38 50 1.97 74

Insulated Case Dimentions

Part Numbering System380LQ 561 M 160 HO1 2

Type Capacitance Tolerance Rated Case Code Insulation561 = 560 µF M = 20% Voltage 2 = PVC

392 = 3900 µF 160 = 160 V450 = 450 V

Ratings

160 Vdc (200 Vdc Surge)560 380LQ561M160H012 0.355 0.160 2.25 3.15 22 X 25680 380LQ681M160H022 0.293 0.132 2.50 3.50 22 X 30820 380LQ821M160H032 0.243 0.109 2.75 3.85 22 X 35

1000 380LQ102M160H042 0.199 0.090 3.00 4.20 22 X 401000 380LQ102M160J022 0.199 0.090 3.00 4.20 25 X 301200 380LQ122M160H452 0.166 0.075 3.25 4.55 22 X 451200 380LQ122M160J032 0.166 0.075 3.25 4.55 25 X 351200 380LQ122M160K012 0.166 0.075 3.25 4.55 30 X 251500 380LQ152M160H052 0.133 0.060 3.73 5.22 22 X 501500 380LQ152M160J042 0.133 0.060 3.73 5.22 25 X 401500 380LQ152M160K022 0.133 0.060 3.73 5.22 30 X 301500 380LQ152M160A012 0.133 0.060 3.73 5.22 35 X 251800 380LQ182M160J452 0.111 0.050 4.20 5.88 25 X 451800 380LQ182M160K032 0.120 0.054 4.20 5.88 30 X 351800 380LQ182M160A022 0.111 0.050 4.20 5.88 35 X 302200 380LQ222M160K042 0.090 0.041 4.78 6.69 30 X 402200 380LQ222M160A032 0.098 0.049 4.78 6.69 35 X 352700 380LQ272M160K452 0.074 0.033 5.45 7.63 30 X 452700 380LQ272M160A042 0.080 0.040 5.45 7.63 35 X 403300 380LQ332M160A452 0.070 0.035 5.75 8.05 35 X 453900 380LQ392M160A052 0.055 0.028 6.00 8.40 35 X 50

180 Vdc. (225 Vdc Surge)470 380LQ471M180H012 0.423 0.190 2.08 2.91 22 X 25560 380LQ561M180H022 0.355 0.160 2.25 3.15 22 X 30680 380LQ681M180H022 0.293 0.132 2.50 3.50 22 X 30680 380LQ681M180J012 0.293 0.132 2.50 3.50 25 X 25820 380LQ821M180H032 0.243 0.109 2.75 3.85 22 X 35820 380LQ821M180J022 0.243 0.109 2.75 3.85 25 X 30

ESR Max Ripple Max Nominal@ 25 °C @ 105 °C Size

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz DxL(µF) Part Number (Ω) (Ω) (Α) (Α) (mm)

1000 380LQ102M180H452 0.199 0.090 3.00 4.20 22 X 451000 380LQ102M180J032 0.199 0.090 3.00 4.20 25 X 351000 380LQ102M180K012 0.199 0.090 3.00 4.20 30 X 251200 380LQ122M180H052 0.166 0.075 3.31 4.63 22 X 501200 380LQ122M180J042 0.166 0.075 3.31 4.63 25 X 401200 380LQ122M180K022 0.166 0.075 3.31 4.63 30 X 301200 380LQ122M180A012 0.166 0.075 3.31 4.63 35 X 251500 380LQ152M180J452 0.133 0.060 3.83 5.36 25 X 451500 380LQ152M180K032 0.133 0.060 3.83 5.36 30 X 351500 380LQ152M180A022 0.133 0.060 3.83 5.36 35 X 301800 380LQ182M180J052 0.120 0.054 4.32 6.05 25 X 501800 380LQ182M180K042 0.120 0.054 4.32 6.05 30 X 401800 380LQ182M180A022 0.120 0.054 4.32 6.05 35 X 302200 380LQ222M180K452 0.098 0.049 4.92 6.89 30 X 452200 380LQ222M180A042 0.098 0.049 4.92 6.89 35 X 402700 380LQ272M180K052 0.086 0.043 5.52 7.73 30 X 502700 380LQ272M180A452 0.086 0.043 5.52 7.73 35 X 453300 380LQ332M180A052 0.080 0.040 5.75 8.05 35 X 50

200 Vdc, (250 Vdc Surge)390 380LQ391M200H012 0.510 0.230 1.68 2.35 22 X 25470 380LQ471M200H022 0.423 0.190 1.85 2.59 22 X 30560 380LQ561M200H022 0.355 0.160 2.43 3.40 22 X 30560 380LQ561M200J012 0.355 0.160 2.43 3.40 25 X 25680 380LQ681M200H032 0.293 0.132 2.68 3.75 22 X 35680 380LQ681M200J022 0.293 0.132 2.68 3.75 25 X 30820 380LQ821M200H042 0.243 0.109 2.93 4.10 22 X 40820 380LQ821M200J022 0.243 0.109 2.93 4.10 25 X 30820 380LQ821M200K012 0.243 0.109 2.93 4.10 30 X 25

1000 380LQ102M200H452 0.199 0.090 3.25 4.55 22 X 45



Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER



Typical Performance CurvesLife Test, 105 °C, Full Load, 120 F, 400 V

-2

0

2

4

6

8

10

12

0 500 1000 1500 2000

Test Hours

∆ C

ap (

%)

and

DF

(%

)

0

10

20

30

DC

L (

uA)

DF

DCL

∆C

Life Test, 105 °C, Full Load, 330 F, 400 V

-1

0

1

2

3

4

5

6

7

8

0 500 1000 1500 2000

Test Hours

∆ C

ap (

%)

and

DF

(%

)

0

10

20

30

40

50

60

70

80

90

DC

L (

uA)

DF

DCL

∆C

Type 380LQ Operating Life vs Ripple Current

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5

Rated Ripple-Current Multiple

Exp

ecte

d O

pera

ting

Lif

e, k

h

45°C

55°C

65°C

75°C

85°C

Aluminum

Snap-InCapacitors


CORNELLDUBILIER



1000 380LQ102M200J032 0.199 0.090 3.25 4.55 25 X 351000 380LQ102M200K022 0.199 0.090 3.25 4.55 30 X 301000 380LQ102M200A012 0.232 0.116 3.25 4.55 35 X 251200 380LQ122M200H052 0.166 0.075 3.50 4.90 22 X 501200 380LQ122M200J042 0.166 0.075 3.50 4.90 25 X 401200 380LQ122M200K022 0.166 0.075 3.50 4.90 30 X 301500 380LQ152M200J052 0.133 0.060 3.87 5.42 25 X 501500 380LQ152M200K032 0.144 0.065 3.87 5.42 30 X 351500 380LQ152M200A022 0.144 0.065 3.87 5.42 35 X 301800 380LQ182M200K452 0.160 0.080 4.32 6.05 30 X 451800 380LQ182M200A032 0.120 0.060 4.32 6.05 35 X 352200 380LQ222M200K052 0.098 0.049 4.92 6.89 30 X 502200 380LQ222M200A042 0.105 0.053 4.92 6.89 35 X 402700 380LQ272M200A052 0.086 0.043 5.45 7.63 35 X 50

250 Vdc, (300 Vdc Surge)270 380LQ271M250H012 0.737 0.332 1.31 1.83 22 X 25330 380LQ331M250H022 0.603 0.271 1.75 2.45 22 X 30390 380LQ391M250H022 0.510 0.230 1.91 2.67 22 X 30390 380LQ391M250J012 0.510 0.230 1.91 2.67 25 X 25470 380LQ471M250H032 0.423 0.190 2.11 2.95 22 X 35470 380LQ471M250J022 0.423 0.190 2.11 2.95 25 X 30560 380LQ561M250H042 0.355 0.160 2.25 3.15 22 X 40560 380LQ561M250J022 0.355 0.160 2.25 3.15 25 X 30560 380LQ561M250K012 0.355 0.160 2.25 3.15 30 X 25680 380LQ681M250H452 0.293 0.132 2.50 3.50 22 X 45680 380LQ681M250J032 0.293 0.132 2.50 3.50 25 X 35680 380LQ681M250K022 0.293 0.132 2.50 3.50 30 X 30820 380LQ821M250H052 0.243 0.109 2.77 3.88 22 X 50820 380LQ821M250J042 0.243 0.109 2.77 3.88 25 X 40820 380LQ821M250K022 0.243 0.109 2.77 3.88 30 X 30820 380LQ821M250A012 0.243 0.121 2.77 3.88 35 X 25

1000 380LQ102M250J452 0.199 0.090 3.32 4.65 25 X 451000 380LQ102M250K032 0.199 0.090 3.32 4.65 30 X 351000 380LQ102M250A022 0.199 0.090 3.32 4.65 35 X 301200 380LQ122M250K042 0.166 0.075 3.53 4.94 30 X 401200 380LQ122M250A032 0.166 0.083 3.53 4.94 35 X 351500 380LQ152M250K052 0.133 0.066 4.04 5.66 30 X 501500 380LQ152M250A042 0.133 0.066 4.04 5.66 35 X 401800 380LQ182M250A452 0.111 0.055 4.55 6.37 35 X 452200 380LQ222M250A052 0.105 0.052 5.00 7.00 35 X 50

315 Vdc, (385 Vdc Surge)180 380LQ181M315H012 1.105 0.553 1.21 1.69 22 X 25220 380LQ221M315H022 0.904 0.452 1.41 1.97 22 X 30270 380LQ271M315H022 0.737 0.368 1.60 2.24 22 X 30330 380LQ331M315H042 0.603 0.301 1.82 2.55 22 X 40330 380LQ331M315J022 0.603 0.301 1.82 2.55 25 X 30330 380LQ331M315K012 0.603 0.301 1.82 2.55 30 X 25390 380LQ391M315H452 0.510 0.255 2.01 2.81 22 X 45390 380LQ391M315J032 0.510 0.255 2.01 2.81 25 X 35390 390LQ391M315K022 0.510 0.255 2.01 2.81 30 X 30470 380LQ471M315H052 0.423 0.212 2.27 3.18 22 X 50470 380LQ471M315J042 0.423 0.212 2.27 3.18 25 X 40470 380LQ471M315K022 0.423 0.212 2.27 3.18 30 X 30470 380LQ471M315A012 0.423 0.233 2.27 3.18 35 X 25560 380LQ561M315J452 0.355 0.178 2.56 3.58 25 X 45560 380LQ561M315K032 0.355 0.178 2.56 3.58 30 X 35560 380LQ561M315A022 0.355 0.195 2.56 3.58 35 X 30680 380LQ681M35K042 0.293 0.148 2.87 4.02 30 X 40680 380LQ681M315A032 0.293 0.146 2.87 4.55 35 X 35820 380LQ821M315K452 0.243 0.121 3.25 4.55 30 X 45820 380LQ821M315A042 0.243 0.121 3.25 4.55 35 X 40

1000 380LQ102M315K052 0.199 0.090 3.63 5.08 30 X 501000 380LQ102M315A452 0.199 0.109 3.63 5.08 35 X 45

350 Vdc (400 Vdc Surge)150 380LQ151M350H012 1.328 0.663 1.12 1.57 22 X 25180 380LQ181M350H022 1.105 0.553 1.22 1.71 22 X 30220 380LQ221M350H032 0.904 0.452 1.44 2.02 22 X 35

270 380LQ271M350H042 0.737 0.368 1.66 2.32 22 X 40270 380LQ271M350J022 0.737 0.368 1.66 2.32 25 X 30330 380LQ331M350H452 0.603 0.301 1.88 2.63 22 X 45330 380LQ331M350J032 0.603 0.301 1.88 2.63 25 X 35390 380LQ391M350H052 0.510 0.255 2.06 2.88 22 X 50390 380LQ391M350J042 0.510 0.255 2.06 2.88 25 X 40390 380LQ391M350K022 0.510 0.255 2.06 2.88 30 X 30390 380LQ391M350A012 0.510 0.255 2.06 2.88 35 X 25470 380LQ471M350J452 0.423 0.211 2.40 3.36 25 X 45470 380LQ471M350K032 0.423 0.211 2.40 3.36 30 X 35470 380LQ471M350A022 0.423 0.211 2.40 3.36 35 X 30560 380LQ561M350J050 0.355 0.178 2.60 3.64 25 X 50560 380LQ561M350K042 0.355 0.178 2.60 3.64 30 X 40560 380LQ561M350A022 0.355 0.178 2.60 3.64 35 X 30680 380LQ681M350K452 0.293 0.146 2.96 4.14 30 X 45680 380LQ681M350A032 0.293 0.146 2.96 4.14 35 X 35820 380LQ821M350K052 0.243 0.121 3.25 4.55 30 X 50820 380LQ821M350A452 0.243 0.121 3.25 4.55 35 X 45

1000 380LQ102M350A052 0.199 0.109 3.54 4.96 35 X 50400 Vdc (450 Vdc Surge)

120 380LQ121M400H012 1.658 0.830 1.02 1.43 22 X 25150 380LQ151M400H022 1.326 0.660 1.16 1.62 22 X 30180 380LQ181M400H032 1.105 0.552 1.44 2.02 22 X 35220 380LQ221M400H042 0.904 0.452 1.49 2.09 22 X 40220 380LQ221M400J022 0.904 0.452 1.49 2.09 25 X 30270 380LQ271M400H452 0.737 0.368 1.67 2.34 22 X 45270 380LQ271M400J032 0.737 0.368 1.67 2.34 25 X 35270 380LQ271M400K022 0.737 0.368 1.67 2.34 30 X 30330 380LQ331M400H052 0.603 0.301 1.90 2.66 22 X 50330 380LQ331M400J042 0.603 0.301 1.90 2.66 25 X 40330 380LQ331M400K022 0.603 0.301 1.90 2.66 30 X 30330 380LQ331M400A012 0.603 0.301 1.90 2.66 35 X 25390 380LQ391M400J452 0.510 0.255 2.13 2.98 25 X 45390 380LQ391M400K032 0.510 0.255 2.13 2.98 30 X 35390 380LQ391M400A022 0.510 0.255 2.13 2.98 35 X 30470 380LQ471M400J052 0.423 0.212 2.39 3.35 25 X 50470 380LQ471M400K042 0.423 0.212 2.39 3.35 30 X 40470 380LQ471M400A022 0.423 0.212 2.39 3.35 35 X 30560 380LQ561M400K452 0.355 0.178 2.69 3.77 30 X 45560 380LQ561M400A032 0.355 0.178 2.69 3.77 35 X 35680 380LQ681M400K052 0.293 0.148 2.96 4.14 30 X 50680 380LQ681M400A452 0.293 0.148 2.96 4.14 35 X 45820 380LQ821M400A052 0.243 0.122 3.25 4.55 35 X 50

450 Vdc (500 Vdc Surge)82 380LQ820M450H012 2.426 1.213 0.83 1.16 22 X 25

100 380LQ101M450H012 1.990 0.995 0.93 1.30 22 X 25120 380LQ121M450H022 1.656 0.829 1.04 1.46 22 X 30150 380LQ151M450H032 1.326 0.663 1.19 1.67 22 X 35150 380LQ151M450J022 1.326 0.663 1.19 1.67 25 X 30180 380LQ181M450H042 1.105 0.553 1.35 1.89 22 X 40180 380LQ181M450J022 1.105 0.553 1.35 1.89 25 X 30220 380LQ221M450H452 0.904 0.452 1.55 2.17 22 X 45220 380LQ221M450J042 0.904 0.452 1.55 2.17 25 X 40220 380LQ221M450K022 0.904 0.452 1.55 2.17 30 X 30220 380LQ221M450A012 0.904 0.452 1.55 2.17 35 X 25270 380LQ271M450H052 0.737 0.368 1.78 2.49 22 X 50270 380LQ271M450J042 0.737 0.368 1.78 2.49 25 X 40270 380LQ271M450K022 0.737 0.368 1.78 2.49 30 X 30330 380LQ331M450J052 0.603 0.302 2.01 2.81 25 X 50330 380LQ331M450K042 0.603 0.302 2.01 2.81 30 X 40330 380LQ331M450A022 0.603 0.302 2.01 2.81 35 X 30390 380LQ391M450K042 0.510 0.255 2.24 3.14 30 X 40390 380LQ391M450A032 0.510 0.255 2.24 3.14 35 X 35470 380LQ471M450K452 0.423 0.212 2.53 3.54 30 X 45470 380LQ471M450A042 0.423 0.212 2.53 3.54 35 X 40560 380LQ561M450K052 0.355 0.178 2.82 3.95 30 X 50560 380LQ561M450A452 0.355 0.178 2.82 3.95 35 X 45





Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER


SpecificationsOperating Temperature: 40 °C to 85 °C up to 300 V, 25 °C to 85 °C 315 V

Rated Voltage: 16 Vdc to 500 VdcCapacitance: 33 µF to 120,000 F 20%

Leakage Current: 3CV A at 5 min.


Frequency

60 Hz 120 Hz 500 Hz 1 kHz 10 kHz& up

16-100 Vdc 0.95 1.00 1.05 1.08 1.15160-450 Vdc 0.80 1.00 1.20 1.25 1.40

EIA Ripple Life: 3,000 h @ full load at +85 °C per EIA IS-749 Capacitance 20%ESR 150% of limitDCL 100% of limit

Shelf Life: 1000 h @ 85 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane

Types 380L, 382L, 380LX & 382LX, 85 C High-Capacitance Snap-In

The excellent value of Type 380L/LX capacitors findsapplication in switching power supply input and outputcircuits and even motor drives where the high surface areaof multiple units in parallel approaches the ripple capabilityof our Type 520C computer-grade capacitor. Type 380LXdelivers more capacitance per can size while Type 380Lgives lower ESR for the same capacitance rating. Type 382Lgives the choice of 4 or 5 leads for stable, reverse proofmounting. 382LX is available with 4 pins.

Types 380L/LX & 4-pin Mount 382LX (85 °C)

Highlights Latest available ratings, worldwide Top performance in power supplies and motor drives Big selection of 46 case sizes 2, 4 and 5 leads available

45 °C 60 °C 70 °C 85 °C1.5 1.4 1.3 1.0

Ripple

Type 381LXp 2.074

Type 381LXp 2.074

Life

Temp Type 381LXp 2.074

MORESmaller

Type 380LQp 2.054

Aluminum

Snap-InCapacitors


CORNELLDUBILIER


Outline Drawings

Four Pins382L/LX (35 and 40 mm diameter)

Five Pins382L (40 and 50 mm diameter)

Notes:* Use dummy terminals for mechanical support only. Make no electrical connection because they resistively connect through the

electrolyte to the negative terminal.

** Safety Vent may be on the bottom or on the side of the can.

** Safety Vent

D+1max.

PC Board Mounting Holesbottom view

V Terminal Standoff Pin Dimensions

** Safety Vent

Two Pins380L/LX (20 through 40 mm diameter)


Terminal Connection40 mm Dia. 50 mm Dia.

A dummy negative (–)B dummy dummyC positive (+) positive (+)D dummy positive (+)– negative (–) negative (–)

Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER


Insulated Case DimensionsDIAMETER LENGTH Typical

Case “D” “L” WeightCode mm inches mm inches (grams)

G01 20 0.79 25 0.98 14G02 20 0.79 30 1.18 17G03 20 0.79 35 1.38 19G04 20 0.79 40 1.57 21

H20 22 0.87 20 0.79 14H01 22 0.87 25 0.98 16H02 22 0.87 30 1.18 19H03 22 0.87 35 1.38 22H04 22 0.87 40 1.57 24H45 22 0.87 45 1.77 28H05 22 0.87 50 1.97 31

J20 25 0.98 20 0.79 16J01 25 0.98 25 0.98 20J02 25 0.98 30 1.18 24J03 25 0.98 35 1.38 27J45 25 0.98 40 1.57 31J04 25 0.98 45 1.77 35J05 25 0.98 50 1.97 38

K20 30 1.18 20 0.79 25K01 30 1.18 25 0.98 30K02 30 1.18 30 1.18 35K03 30 1.18 35 1.38 40K04 30 1.18 40 1.57 44K45 30 1.18 45 1.77 48K05 30 1.18 50 1.97 53

DIAMETER LENGTH TypicalCase “D” “L” WeightCode mm inches mm inches (grams)

A20 35 1.38 20 0.79 35A01 35 1.38 25 0.98 42A02 35 1.38 30 1.18 48A03 35 1.38 35 1.38 54A04 35 1.38 40 1.57 62A45 35 1.38 45 1.77 67A05 35 1.38 50 1.97 74A06 35 1.38 63 2.48 88A07 35 1.38 70 2.76 98A08 35 1.38 80 3.15 112A10 35 1.38 105 4.13 144

N04 40 1.57 40 1.57 82N05 40 1.57 50 1.97 105N06 40 1.57 63 2.48 130N08 40 1.57 80 3.15 185N10 40 1.57 105 4.13 265

B05 50 1.97 50 1.97 136B06 50 1.97 63 2.48 168B08 50 1.97 80 3.15 239B09 50 1.97 92 3.62 241B10 50 1.97 105 4.13 325


382LX 272 M 200 N05 2 V

Type Capacitance Tolerance Rated Case Code Insulation 382L/LX380L (2 pins) 272 = 2700 µF M = 20% Voltage 2 = PVC 5 Pin Mount380LX (2 pins) 333 = 33000 µF Vdc blank = 4 pins 382L (4 or 5 pins) (35 or 40 mm dia)382LX (4 or 5 pins) V = 5 pins

(40 or 50 mm dia)


Life Test Data 380L222M050K012Capacitance, DF, Leakage Current

Life Test Data 380LX222M100J042Capacitance, DF, Leakage Current


Aluminum

Snap-InCapacitors


CORNELLDUBILIER




Ratings


4700 380L472M016H012 0.099 0.075 1.60 1.80 22x254700 380LX472M016H202 0.141 0.107 1.60 1.80 22x206800 380L682M016H022 0.068 0.051 1.80 2.10 22x306800 380L682M016J012 0.068 0.051 1.80 2.10 25x256800 380LX682M016G012 0.098 0.074 3.20 3.70 20x256800 380LX682M016J202 0.098 0.074 1.80 2.10 25x208200 380LX822M016G022 0.081 0.061 3.50 4.00 20x30

10000 380L103M016H042 0.046 0.035 2.40 2.80 22x4010000 380L103M016J022 0.046 0.035 2.40 2.80 25x3010000 380L103M016K012 0.046 0.035 2.40 2.80 30x2510000 380LX103M016G032 0.066 0.050 3.80 4.40 20x3510000 380LX103M016H022 0.066 0.050 3.80 4.30 22x3010000 380LX103M016J012 0.066 0.050 3.80 4.30 25x2510000 380LX103M016K202 0.066 0.050 2.40 2.80 30x2012000 380LX123M016G032 0.055 0.042 4.50 5.20 20x3512000 380LX123M016H022 0.055 0.042 4.50 5.20 22x3012000 380LX123M016J012 0.055 0.042 4.50 5.20 25x2515000 380L153M016H052 0.031 0.023 3.20 3.70 22x5015000 380L153M016J042 0.031 0.023 3.20 3.70 25x4015000 380L153M016K022 0.031 0.023 3.20 3.70 30x3015000 380LX153M016G042 0.044 0.033 5.30 6.10 20x4015000 380LX153M016H032 0.044 0.033 5.30 6.00 22x3515000 380LX153M016J022 0.044 0.033 5.30 6.00 25x3015000 380LX153M016A202 0.044 0.033 3.20 3.70 35x2018000 380LX183M016H042 0.037 0.028 5.60 6.40 22x4018000 380LX183M016J022 0.037 0.028 5.60 6.40 25x3022000 380L223M016J052 0.021 0.016 3.60 4.10 25x50

Max. ESR Ripple Amps NominalCap. Catalog Ω @ 25 °C Max. @ 85 °C Size DxLµF Number 120 Hz 20 kHz 120 Hz 20 kHz (mm)

16 Vdc (20 Vdc Surge) (cont’d)

22000 380L223M016K042 0.021 0.016 3.60 4.10 30x4022000 380L223M016A022 0.021 0.016 3.60 4.10 35x3022000 380LX223M016H452 0.030 0.023 6.10 7.20 22x4522000 380LX223M016J032 0.030 0.023 6.10 7.00 25x3522000 380LX223M016K022 0.030 0.023 6.10 7.00 30x3027000 380LX273M016J452 0.025 0.019 6.30 7.30 25x4527000 380LX273M016K032 0.025 0.019 6.30 7.30 30x3533000 380L333M016K052 0.014 0.011 4.40 5.10 30x5033000 380L333M016A042 0.014 0.011 4.40 5.10 35x4033000 380LX333M016J052 0.020 0.015 6.80 7.80 25x5033000 380LX333M016K042 0.020 0.015 6.80 7.90 30x4033000 380LX333M016A022 0.020 0.015 6.80 7.90 35x3039000 380LX393M016K452 0.017 0.013 6.90 7.90 30x4539000 380LX393M016A032 0.017 0.013 6.90 8.00 35x3547000 380LX473M016K052 0.018 0.014 7.50 8.60 30x5047000 380LX473M016A042 0.018 0.014 7.50 8.60 35x4056000 380LX563M016A452 0.017 0.013 8.70 10.00 35x4556000 382L563M016N042 0.025 0.016 7.50 8.00 40x4068000 380LX683M016A052 0.017 0.013 9.00 10.40 35x5068000 382L683M016N052 0.018 0.010 9.60 10.50 40x5082000 380LX823M016A062 0.018 0.014 9.90 11.40 35x6382000 382LX823M016N052 0.019 0.014 10.30 11.80 40x50

100000 380LX104M016A082 0.019 0.010 11.00 12.70 35x80100000 382LX104M016N062 0.020 0.015 11.40 13.00 40x63120000 380LX124M016A102 0.014 0.013 12.81 14.73 35x105120000 382LX124M016B052V 0.014 0.013 13.17 15.15 50x50120000 382LX124M016N082 0.018 0.014 12.40 14.30 40x80



Life Test Data 380LX331M450K052Capacitance, DF, Leakage Current

Alum

inum

Snap

-InCa

paci

tors


150000 382LX154M016B062V 0.012 0.011 14.40 16.56 50x63180000 382LX184M016B082V 0.011 0.010 15.69 18.04 50x80180000 382LX184M016N102 0.013 0.012 14.85 17.08 40x105220000 382LX224M016B092V 0.010 0.009 16.73 19.24 50x92270000 382LX274M016B102V 0.009 0.008 17.79 20.46 50x105


3300 380L332M025H012 0.121 0.091 1.60 1.80 22x253300 380LX332M025H202 0.161 0.122 1.60 1.80 22x204700 380L472M025H022 0.085 0.064 1.80 2.10 22x304700 380L472M025J012 0.085 0.064 1.80 2.10 25x254700 380LX472M025G012 0.113 0.085 3.10 3.50 20x254700 380LX472M025J202 0.113 0.085 1.80 2.10 25x205600 380LX562M025G022 0.095 0.072 3.40 3.90 20x306800 380L682M025H042 0.059 0.045 2.30 2.60 22x406800 380L682M025J022 0.059 0.045 2.30 2.60 25x306800 380L682M025K012 0.059 0.045 2.30 2.60 30x256800 380LX682M025G032 0.078 0.059 3.50 4.00 20x356800 380LX682M025H022 0.078 0.059 3.50 4.00 22x306800 380LX682M025J012 0.078 0.059 3.50 4.00 25x256800 380LX682M025K202 0.078 0.059 2.30 2.60 30x208200 380LX822M025G042 0.065 0.049 3.60 4.10 20x408200 380LX822M025H022 0.065 0.049 3.60 4.10 22x308200 380LX822M025J012 0.065 0.049 3.60 4.10 25x25

10000 380L103M025H052 0.040 0.030 2.70 3.10 22x5010000 380L103M025J042 0.040 0.030 2.70 3.10 25x4010000 380L103M025K022 0.040 0.030 2.70 3.10 30x3010000 380LX103M025H032 0.053 0.040 3.80 4.30 22x3510000 380LX103M025J022 0.053 0.040 3.80 4.30 25x3010000 380LX103M025K012 0.053 0.040 3.80 4.30 30x2510000 380LX103M025A202 0.053 0.040 2.70 3.10 35x2012000 380LX123M025H042 0.044 0.033 4.10 4.70 22x4012000 380LX123M025J032 0.044 0.033 4.10 4.70 25x3512000 380LX123M025K022 0.044 0.033 4.10 4.70 30x3015000 380L153M025J052 0.027 0.020 3.40 3.90 25x5015000 380L153M025K042 0.027 0.020 3.40 3.90 30x4015000 380L153M025A022 0.027 0.020 3.40 3.90 35x3015000 380LX153M025H052 0.035 0.026 4.60 5.30 22x5015000 380LX153M025J042 0.035 0.026 4.60 5.30 25x4015000 380LX153M025K022 0.035 0.026 4.60 5.30 30x3018000 380LX183M025J452 0.029 0.022 5.50 6.30 25x4518000 380LX183M025K032 0.029 0.022 5.50 6.30 30x3522000 380L223M025K052 0.018 0.014 4.20 4.80 30x5022000 380L223M025A042 0.018 0.014 4.20 4.80 35x4022000 380LX223M025J052 0.024 0.018 6.10 7.00 25x5022000 380LX223M025K042 0.024 0.018 6.10 7.00 30x4027000 380LX273M025K452 0.020 0.015 6.20 7.10 30x4527000 380LX273M025A03 0.020 0.015 6.20 7.10 35x3533000 380LX333M025K052 0.016 0.015 6.80 7.90 30x5033000 380LX333M025A042 0.016 0.015 6.80 7.90 35x4033000 382L333M025N042 0.026 0.016 7.30 8.00 40x4039000 380LX393M025A452 0.016 0.012 7.40 8.50 35x4539000 382LX393M025N042 0.020 0.018 8.00 9.20 40x4047000 380LX473M025A052 0.015 0.011 8.00 9.20 35x5047000 380L473M025A062 0.017 0.009 8.30 9.50 35x6347000 382L473M025N052 0.019 0.012 8.40 9.70 40x5056000 380L563M025A072 0.015 0.008 9.10 10.30 35x7056000 382L563M025N062 0.015 0.009 9.50 10.30 40x6356000 380LX563M025A062 0.017 0.013 8.60 9.90 35x6356000 382LX563M025N052 0.018 0.014 9.00 10.30 40x5068000 380LX683M025A082 0.017 0.013 9.40 10.90 35x8068000 382LX683M025N062 0.018 0.014 9.80 11.20 40x6382000 382L823M025N082 0.011 0.007 11.20 11.80 40x8082000 382LX823M025B052V 0.016 0.015 12.29 14.13 50x50

100000 380LX104M025A102 0.010 0.008 11.97 13.77 35x105100000 382LX104M025B062V 0.014 0.013 13.45 15.47 50x63


100000 382LX104M025N082 0.018 0.014 11.70 13.40 40x80120000 382LX124M025B082V 0.012 0.011 15.29 17.58 50x80150000 382LX154M025N102 0.011 0.010 14.07 16.18 40x105150000 382LX154M025B092V 0.011 0.010 16.01 18.41 50x92180000 382LX184M025B102V 0.010 0.009 16.89 19.42 50x105


2200 380L222M035H012 0.151 0.115 1.40 1.60 22x252200 380LX222M035H202 0.211 0.160 1.40 1.60 22x203300 380L332M035H022 0.100 0.076 1.70 2.00 22x303300 380L332M035J012 0.100 0.076 1.70 2.00 25x253300 380LX332M035G012 0.141 0.107 2.70 3.10 20x253300 380LX332M035J202 0.141 0.107 1.70 2.00 25x203900 380LX392M035G022 0.119 0.090 2.90 3.40 20x304700 380L472M035H042 0.071 0.054 2.00 2.30 22x404700 380L472M035J022 0.071 0.054 2.00 2.30 25x304700 380L472M035K012 0.071 0.054 2.00 2.30 30x254700 380LX472M035G032 0.099 0.075 3.30 3.70 20x354700 380LX472M035H022 0.099 0.075 3.30 3.70 22x304700 380LX472M035J012 0.099 0.075 3.30 3.70 25x254700 380LX472M035K202 0.099 0.075 2.00 2.30 30x205600 380LX562M035G042 0.083 0.063 3.40 3.90 20x405600 380LX562M035H022 0.083 0.063 3.40 3.90 22x305600 380LX562M035J012 0.083 0.063 3.40 3.90 25x256800 380L682M035H052 0.049 0.037 2.40 2.80 22x506800 380L682M035J042 0.049 0.037 2.40 2.80 25x406800 380L682M035K022 0.049 0.037 2.40 2.80 30x306800 380LX682M035H032 0.068 0.051 3.70 4.20 22x356800 380LX682M035A202 0.068 0.051 2.40 2.80 35x206800 380LX682M035J022 0.069 0.051 3.70 4.20 25x308200 380LX822M035H042 0.057 0.043 4.00 4.60 22x408200 380LX822M035J032 0.057 0.043 4.00 4.60 25x35

10000 380L103M035J052 0.033 0.025 3.00 3.50 25x5010000 380L103M035K042 0.033 0.025 3.00 3.50 30x4010000 380L103M035A022 0.033 0.025 3.00 3.50 35x3010000 380LX103M035H452 0.046 0.035 4.40 5.10 22x4510000 380LX103M035J042 0.046 0.035 4.40 5.10 25x4010000 380LX103M035K022 0.046 0.035 4.40 5.10 30x3010000 380LX103M035A012 0.046 0.035 4.40 5.10 35x2512000 380LX123M035J452 0.039 0.029 5.10 5.80 25x4512000 380LX123M035K032 0.039 0.029 5.10 5.80 30x3512000 380LX123M035A022 0.039 0.029 5.10 5.80 35x3015000 380L153M035K052 0.022 0.017 3.70 4.30 30x5015000 380L153M035A042 0.022 0.017 3.70 4.30 35x4015000 380LX153M035J052 0.031 0.023 5.60 6.40 25x5015000 380LX153M035K042 0.031 0.023 5.60 6.40 30x4015000 380LX153M035A022 0.031 0.023 5.60 6.40 35x3018000 380LX183M035K452 0.026 0.020 5.70 6.50 30x4518000 380LX183M035A032 0.026 0.020 5.70 6.50 35x3522000 380LX223M035K052 0.021 0.016 6.10 7.00 30x5022000 380LX223M035A042 0.021 0.016 6.10 7.00 35x4027000 380LX273M035A452 0.017 0.013 6.80 7.90 35x4527000 382L273M035N042 0.027 0.016 6.70 7.20 40x4033000 380LX333M035A052 0.014 0.011 7.20 8.30 35x5033000 380L333M035A062 0.018 0.009 7.80 8.70 35x6339000 380LX393M035A062 0.015 0.008 7.90 9.10 35x6339000 380L393M035A072 0.015 0.008 8.60 9.50 35x7039000 382L393M035N052 0.019 0.012 8.00 8.40 40x5047000 380LX473M035A082 0.015 0.011 9.50 10.90 35x8047000 382L473M035N062 0.016 0.009 9.00 9.50 40x6356000 382LX563M035B052V 0.015 0.012 10.94 12.58 50x5068000 380LX683M035A102 0.010 0.008 10.62 12.21 35x10568000 382L683M035N082 0.011 0.007 10.60 11.10 40x8068000 382LX683M035B062V 0.013 0.011 11.93 13.72 50x6382000 382LX823M035N102 0.012 0.009 12.02 13.82 40x10582000 382LX823M035B082V 0.012 0.010 13.06 15.02 50x80




CORNELLDUBILIER





Aluminum

Snap-InCapacitors


100000 382LX104M035B092V 0.011 0.009 13.97 16.07 50x92120000 382LX124M035B102V 0.010 0.008 14.86 17.09 50x105


1500 380LX152M050H202 0.177 0.134 1.20 1.40 22x201500 380L152M050H012 0.177 0.134 1.20 1.40 22x252200 380L222M050H022 0.121 0.092 1.40 1.60 22x302200 380L222M050J012 0.121 0.092 1.40 1.60 25x252200 380LX222M050G012 0.181 0.137 2.30 2.60 20x252200 380LX222M050J202 0.181 0.137 1.40 1.60 25x202700 380LX272M050G022 0.147 0.111 2.50 2.90 20x303300 380L332M050H042 0.080 0.061 1.70 2.00 22x403300 380L332M050J022 0.080 0.061 1.70 2.00 25x303300 380L332M050K012 0.080 0.061 1.70 2.00 30x253300 380LX332M050G032 0.121 0.092 2.70 3.10 20x353300 380LX332M050H022 0.121 0.092 2.70 3.10 22x303300 380LX332M050J012 0.121 0.092 2.70 3.10 25x253300 380LX332M050K202 0.121 0.092 1.70 2.00 30x203900 380LX392M050G042 0.102 0.077 2.80 3.20 20x403900 380LX392M050H022 0.102 0.077 2.80 3.20 22x303900 380LX392M050J012 0.102 0.077 2.80 3.20 25x254700 380L472M050H052 0.056 0.042 2.10 2.40 22x504700 380L472M050J042 0.056 0.042 2.10 2.40 25x404700 380L472M050K022 0.056 0.042 2.10 2.40 30x304700 380LX472M050H032 0.085 0.064 3.00 3.50 22x354700 380LX472M050J022 0.085 0.064 3.00 3.50 25x304700 380LX472M050K012 0.085 0.064 3.00 3.50 30x254700 380LX472M050A202 0.085 0.064 2.10 2.40 35x205600 380LX562M050H042 0.071 0.054 3.40 3.90 22x405600 380LX562M050J032 0.071 0.054 3.40 3.90 25x355600 380LX562M050K022 0.071 0.054 3.40 3.90 30x306800 380L682M050J052 0.039 0.030 2.60 3.00 25x506800 380L682M050K042 0.039 0.030 2.60 3.00 30x406800 380L682M050A022 0.039 0.030 2.60 3.00 35x306800 380LX682M050H052 0.059 0.045 3.90 4.40 22x506800 380LX682M050J042 0.059 0.045 3.90 4.40 25x406800 380LX682M050K022 0.059 0.045 3.90 4.40 30x308200 380LX822M050J452 0.049 0.037 4.40 5.10 25x458200 380LX822M050K032 0.049 0.037 4.40 5.10 30x35

10000 380L103M050K052 0.027 0.020 3.40 3.90 30x5010000 380L103M050A042 0.027 0.020 3.40 3.90 35x4010000 380LX103M050J052 0.040 0.030 5.00 5.70 25x5010000 380LX103M050K042 0.040 0.030 5.00 5.70 30x4010000 380LX103M050A022 0.040 0.030 5.00 5.70 35x3012000 380LX123M050K452 0.033 0.025 5.60 6.40 30x4512000 380LX123M050A032 0.033 0.025 5.60 6.40 35x3515000 380LX153M050K052 0.027 0.020 6.40 7.40 30x5015000 380LX153M050A042 0.027 0.020 6.40 7.40 35x4015000 382L153M050N042 0.028 0.017 6.80 7.20 40x4018000 380L183M050A062 0.018 0.010 7.80 8.70 35x6318000 380LX183M050A452 0.022 0.017 6.90 7.90 35x4518000 382LX183M050N042 0.023 0.017 6.94 7.98 40x4022000 380L223M050A072 0.015 0.008 8.60 9.50 35x7022000 380LX223M050A052 0.018 0.014 7.60 8.70 35x5022000 382L223M050N052 0.020 0.012 7.90 8.40 40x5027000 380L273M050A082 0.013 0.008 9.30 10.10 35x8027000 382L273M050N062 0.016 0.009 9.00 9.60 40x6327000 380LX273M050A062 0.018 0.013 8.30 9.60 35x6327000 382LX273M050N052 0.021 0.016 8.10 9.30 40x5033000 380LX273M050A082 0.013 0.010 9.20 10.60 35x8033000 382LX273M050N062 0.018 0.014 8.90 10.20 35x8033000 382LX333M050B052V 0.018 0.014 10.48 12.05 50x5039000 382L393M050N082 0.012 0.007 10.70 11.10 40x8047000 382LX473M050B062V 0.013 0.010 11.54 13.27 50x6347000 380LX473M050A102 0.014 0.011 10.27 11.81 35x10556000 382LX563M050N102 0.012 0.009 11.47 13.19 40x105


56000 382LX563M050B082V 0.012 0.009 12.46 14.33 50x8068000 382LX683M050B092V 0.011 0.009 13.17 15.15 50x9282000 382LX823M050B102V 0.011 0.008 13.87 15.95 50x105


1000 380L102M063H012 0.265 0.200 1.20 1.40 22x251000 380LX102M036H202 0.332 0.251 1.20 1.40 22x201500 380L152M063H022 0.177 0.134 1.30 1.50 22x301500 380L152M063J012 0.177 0.134 1.30 1.50 25x251500 380LX152M063J202 0.221 0.167 1.30 1.50 25x202200 380L222M063H042 0.121 0.092 1.50 1.70 22x402200 380L222M063J022 0.121 0.092 1.50 1.70 25x302200 380L222M063K012 0.121 0.092 1.50 1.70 30x252200 380LX222M063G032 0.151 0.114 2.50 2.90 20x352200 380LX222M063H022 0.151 0.114 2.50 2.90 22x302200 380LX222M063J012 0.151 0.114 2.50 2.90 25x252200 380LX222M063K202 0.151 0.114 1.50 1.70 30x202700 380LX272M063G042 0.123 0.093 3.70 4.30 20x402700 380LX272M063H032 0.123 0.093 3.70 4.30 22x352700 380LX272M063J022 0.123 0.093 3.70 4.30 25x303300 380L332M063H052 0.080 0.061 1.90 2.20 22x503300 380L332M063J042 0.080 0.061 1.90 2.20 25x403300 380L332M063K022 0.080 0.061 1.90 2.20 30x303300 380LX332M063H042 0.100 0.076 4.10 4.70 22x403300 380LX332M063J022 0.100 0.076 4.10 4.70 25x303300 380LX332M063K012 0.100 0.076 4.10 4.70 30x253300 380LX332M063A202 0.100 0.076 1.70 2.00 35x203900 380LX392M063H452 0.085 0.064 4.40 5.10 22x453900 380LX392M063J032 0.085 0.064 4.40 5.10 25x353900 380LX392M063K022 0.085 0.064 4.40 5.10 30x304700 380L472M063J052 0.056 0.042 2.30 2.60 25x504700 380L472M063K042 0.056 0.042 2.30 2.60 30x404700 380L472M063A022 0.056 0.042 2.30 2.60 35x304700 380LX472M063H052 0.071 0.054 4.90 5.60 22x504700 380LX472M063J042 0.071 0.054 4.90 5.60 25x404700 380LX472M063K022 0.071 0.054 4.90 5.60 30x304700 380LX472M063A012 0.071 0.054 4.90 5.60 35x255600 380LX562M063A022 0.047 0.045 5.40 6.20 35x305600 380LX562M063J452 0.059 0.045 5.40 6.20 25x455600 380LX562M063K032 0.059 0.045 5.40 6.20 30x356800 380L682M063K052 0.039 0.029 3.00 3.50 30x506800 380L682M063A042 0.039 0.029 3.00 3.50 35x406800 380LX682M063J052 0.049 0.037 5.80 6.70 25x506800 380LX682M063K042 0.049 0.037 5.80 6.70 30x406800 380LX682M063A022 0.049 0.037 5.80 6.70 35x308200 380LX822M063K452 0.040 0.030 6.00 6.90 30x458200 380LX822M063A032 0.040 0.030 6.00 6.90 35x35

10000 382L103M063N042 0.028 0.017 6.60 7.20 40x4010000 380LX103MO63A042 0.033 0.025 6.50 7.50 35x4012000 380L123M063A062 0.019 0.010 7.70 8.60 35x6312000 380L123M063A052 0.028 0.021 7.20 8.30 35x5012000 382LX123M063N042 0.035 0.028 7.15 8.22 40x4015000 380L153M063A072 0.016 0.009 8.50 9.40 35x7015000 382L153M063N052 0.020 0.012 7.90 8.40 40x5015000 380LX153M063A062 0.028 0.021 7.70 8.90 35x6318000 382L183M063N062 0.016 0.010 8.90 9.50 40x6318000 380LX183M063A082 0.023 0.012 9.40 10.80 35x8027000 382L273M063N082 0.012 0.008 10.60 11.10 40x8027000 380LX273M063A102 0.015 0.012 10.38 11.94 35x10527000 382LX273M063B052V 0.018 0.015 10.86 12.49 50x5033000 382LX333M063N102 0.015 0.012 11.76 13.52 40x10533000 382LX333M063B062V 0.017 0.013 11.57 13.42 50x6347000 382LX473M063B082V 0.013 0.010 12.78 14.70 50x8051000 382LX513M063B092V 0.012 0.010 13.34 15.34 50x9256000 382LX563M063B102V 0.012 0.009 13.93 16.02 50x105


CORNELLDUBILIER





Alum

inum

Snap

-InCa

paci

tors


680 380L681M080H012 0.293 0.222 1.00 1.20 22x25680 380LX681M080H202 0.390 0.295 1.00 1.20 22x20

1000 380L102M080H022 0.199 0.151 1.20 1.40 22x301000 380L102M080J012 0.199 0.151 1.20 1.40 25x251000 380LX102M080J202 0.265 0.200 1.20 1.40 25x201500 380L152M080H042 0.133 0.101 1.40 1.60 22x401500 380L152M080J022 0.133 0.101 1.40 1.60 25x301500 380L152M080K012 0.133 0.101 1.40 1.60 30x251500 380LX152M080G032 0.177 0.134 2.30 2.60 20x351500 380LX152M080H022 0.177 0.134 2.30 2.60 22x301500 380LX152M080J012 0.177 0.134 2.30 2.60 25x251500 380LX152M080K202 0.177 0.134 1.40 1.60 30x201800 380LX182M080G042 0.147 0.109 2.50 2.90 20x401800 380LX182M080H032 0.147 0.109 2.50 2.90 22x351800 380LX182M080J022 0.147 0.109 2.50 2.90 25x302200 380L222M080H052 0.090 0.068 1.70 2.00 22x502200 380L222M080J042 0.090 0.068 1.70 2.00 25x402200 380L222M080K022 0.090 0.068 1.70 2.00 30x302200 380LX222M080H042 0.121 0.092 2.70 3.10 22x402200 380LX222M080J022 0.121 0.092 2.70 3.10 25x302200 380LX222M080K012 0.121 0.092 2.70 3.10 30x252200 380LX222M080A202 0.121 0.092 1.70 2.00 35x202700 380LX272M080H452 0.098 0.056 2.80 3.20 22x452700 380LX272M080J032 0.098 0.056 2.80 3.20 25x352700 380LX272M080K022 0.098 0.056 2.80 3.20 30x303300 380L332M080J052 0.060 0.045 2.10 2.40 25x503300 380L332M080K042 0.060 0.045 2.10 2.40 30x403300 380L332M080A022 0.060 0.045 2.10 2.40 35x303300 380LX332M080H052 0.080 0.061 3.20 3.70 22x503300 380LX332M080J042 0.080 0.061 3.20 3.70 25x403300 380LX332M080K022 0.080 0.061 3.20 3.70 30x303900 380LX392M080J452 0.068 0.052 3.60 4.10 25x453900 380LX392M080K032 0.068 0.052 3.60 4.10 30x354700 380L472M080K052 0.042 0.032 2.60 3.00 30x504700 380L472M080A042 0.042 0.032 2.60 3.00 35x404700 380LX472M080J052 0.056 0.042 4.10 4.70 25x504700 380LX472M080K042 0.056 0.042 4.10 4.70 30x405600 380LX562M080K452 0.047 0.036 4.60 5.20 30x455600 380LX562M080A032 0.047 0.036 4.60 5.20 35x356800 380LX682M080K052 0.039 0.029 5.20 5.90 30x506800 380LX682M080A042 0.039 0.029 5.20 5.90 35x408200 380LX822M080A052 0.032 0.024 5.80 6.70 35x508200 382L822M080N042 0.035 0.022 6.30 6.80 40x40

10000 380L103M080A062 0.023 0.014 7.30 8.20 35x6312000 380L123M080A072 0.020 0.012 8.10 9.00 35x7012000 382L123M080N052 0.025 0.016 7.50 8.00 40x5015000 380L153M080A082 0.017 0.010 8.80 9.60 35x8015000 382L153M080N062 0.020 0.013 8.50 9.20 40x6318000 382L183M080N082 0.014 0.009 10.30 10.80 40x8018000 382LX183M080B052V 0.023 0.017 10.00 11.50 50x5022000 380LX223M080A102 0.015 0.011 9.86 11.34 35x10522000 382LX223M080B062V 0.019 0.014 11.08 12.74 50x6327000 382LX273M080N102 0.015 0.012 11.35 13.05 40x10527000 382LX273M080B082V 0.015 0.012 12.33 14.18 50x8033000 382LX333M080B092V 0.014 0.010 13.37 15.38 50x9239000 382LX393M080B102V 0.013 0.010 14.34 16.49 50x105


470 380L471M100H012 0.423 0.320 1.60 1.90 22x25470 380LX471M100H202 0.564 0.426 1.00 1.20 22x20680 380L681M100H022 0.293 0.222 1.80 2.10 22x30680 380L681M100J012 0.293 0.222 1.80 2.10 25x25680 380LX681M100J202 0.390 0.295 1.10 1.30 25x20

1000 380L102M100H042 0.199 0.151 2.50 2.80 22x401000 380L102M100J022 0.199 0.151 2.30 2.70 25x30


1000 380L102M100K012 0.199 0.151 2.40 2.80 30x251000 380LX102M100G032 0.265 0.200 2.00 2.30 20x351000 380LX102M100H022 0.265 0.200 2.00 2.30 22x301000 380LX102M100J012 0.265 0.200 2.00 2.30 25x251000 380LX102M100K202 0.265 0.200 1.20 1.40 30x201200 380LX122M100G042 0.221 0.167 2.30 2.70 20x401200 380LX122M100H032 0.221 0.167 2.30 2.70 22x351200 380LX122M100J022 0.221 0.167 2.30 2.70 25x301500 380L152M100H052 0.133 0.101 3.30 3.80 22x501500 380L152M100J042 0.133 0.101 3.20 3.70 25x401500 380L152M100K022 0.133 0.101 3.20 3.70 30x301500 380LX152M100G052 0.144 0.093 2.57 2.96 20x501500 380LX152M100H042 0.177 0.134 2.60 3.00 22x401500 380LX152M100J022 0.177 0.134 2.60 3.00 25x301500 380LX152M100K012 0.177 0.134 2.60 3.00 30x251500 380LX152M100A202 0.177 0.134 1.50 1.70 35x201800 380LX182M100H452 0.147 0.109 2.80 3.30 22x451800 380LX182M100J032 0.147 0.109 2.80 3.30 25x351800 380LX182M100K022 0.147 0.109 2.80 3.30 30x302200 380L222M100J052 0.090 0.068 4.30 5.00 25x502200 380L222M100K042 0.090 0.068 4.40 5.00 30x402200 380L222M100A022 0.090 0.068 4.30 4.90 35x302200 380LX222M100H052 0.121 0.092 3.10 3.60 22x502200 380LX222M100J042 0.121 0.092 3.10 3.60 25x402200 380LXM222100K022 0.121 0.092 3.10 3.60 30x302200 380LX222M100A012 0.121 0.078 3.14 3.61 35x252700 380LX272M100J452 0.098 0.074 3.70 4.30 25x452700 380LX272M100K032 0.098 0.074 3.70 4.30 30x352700 380LX272M100A022 0.104 0.068 3.71 4.27 35x303300 380L332M100K052 0.060 0.045 5.90 6.80 30x503300 380L332M100A042 0.060 0.045 5.90 6.70 35x403300 380LX332M100J052 0.080 0.061 4.10 4.70 25x503300 380LX332M100K042 0.080 0.061 4.10 4.70 30x403900 380LX392M100K452 0.068 0.052 4.50 5.20 30x453900 380LX392M100A032 0.068 0.052 4.50 5.20 35x354700 380LX472M100K052 0.056 0.042 5.10 5.90 30x504700 380LX472M100A042 0.056 0.042 5.10 5.90 35x405600 382LX562M100N042 0.036 0.023 6.20 6.70 40x405600 380LX562M100A452 0.047 0.036 5.80 6.70 35x456800 380L682M100A062 0.024 0.014 7.20 8.10 35x636800 382L682M100N052 0.026 0.017 7.40 7.90 40x506800 380LX682M100A052 0.039 0.029 6.60 7.60 35x508200 380L822M100A072 0.021 0.012 8.00 8.90 35x708200 382L822M100N062 0.021 0.013 8.40 9.10 40x638200 380LX822M100A062 0.040 0.030 7.00 8.10 35x638200 382LX822M100N052 0.040 0.030 7.30 8.40 40x63

10000 380LX103M100A082 0.018 0.010 8.70 9.60 35x8010000 382LX103M100N062 0.033 0.025 8.00 9.20 40x6310000 382LX103M100B052V 0.033 0.025 8.82 10.14 50x5012000 382L123M100N082 0.015 0.009 10.30 10.80 40x8012000 380LX123M100A102 0.028 0.021 8.57 9.86 35x10515000 382LX153M100N102 0.022 0.017 10.12 11.64 40x10515000 382LX153M100B062V 0.022 0.017 10.07 11.58 50x6318000 382LX183M100B082V 0.018 0.014 11.00 12.65 50x8022000 382LX223M100B092V 0.015 0.011 11.76 13.52 50x9227000 382LX273M100B102V 0.014 0.010 12.53 14.41 50x105


180 380L181M160H012 1.105 0.564 1.10 1.50 22x25220 380LX221M160H202 0.904 0.461 0.80 1.10 22x20270 380L271M160H022 0.737 0.376 1.40 1.90 22x30270 380LX271M160J202 0.737 0.376 0.90 1.20 25x20270 380L127M160J012 0.737 0.376 1.40 1.90 25x25330 380LX331M160G022 0.603 0.308 1.50 2.00 20x30330 380LX331M160H012 0.603 0.308 1.50 2.00 22x25390 380LX391M160H012 0.468 0.234 1.62 2.27 22x25




CORNELLDUBILIER





Aluminum

Snap-InCapacitors


390 380LX391M160G032 0.510 0.260 1.60 2.30 20x35390 380LX391M160H022 0.510 0.260 1.60 2.30 22x30390 380L391M160H042 0.510 0.260 1.80 2.60 22x40390 380LX391M160J012 0.510 0.260 1.60 2.30 25x25390 380L391M160J022 0.510 0.260 1.80 2.60 25x30390 380LX391M160K202 0.510 0.260 1.10 1.50 30x20390 380L391M160K012 0.510 0.260 1.80 2.60 30x25470 380LX471M160H022 0.423 0.216 2.10 3.00 22x30470 380LX471M160J012 0.423 0.216 2.10 3.00 25x25560 380LX561M160H022 0.355 0.178 2.25 3.15 22x30560 380LX561M160H032 0.355 0.181 2.30 3.20 22x35560 380L561M160H052 0.355 0.181 2.40 3.30 22x50560 380LX561M160J012 0.355 0.178 2.25 3.15 25x25560 380LX561M160J022 0.355 0.181 2.30 3.20 25x30560 380L561M160J042 0.355 0.181 2.40 3.30 25x40560 380LX561M160K012 0.355 0.181 2.30 3.20 30x25560 380L561M160K022 0.355 0.181 2.30 3.20 30x30560 380LX561M160A202 0.355 0.181 1.30 1.80 35x20680 380LX681M160H032 0.293 0.146 2.50 3.50 22x35680 380LX681M160H042 0.293 0.149 2.50 3.50 22x40680 380LX681M160J022 0.293 0.146 2.50 3.50 25x30680 380LX681M160J032 0.293 0.149 2.50 3.50 25x35680 380LX681M160K012 0.293 0.149 2.50 3.50 30x25820 380LX821M160H042 0.243 0.131 2.75 3.85 22x40820 380LX821M160H452 0.243 0.124 2.80 3.90 22x45820 380LX821M160J032 0.243 0.124 2.80 3.90 25x35820 380L821M160J052 0.243 0.124 3.20 4.50 25x50820 380LX821M160K012 0.243 0.131 2.75 3.85 30x25820 380LX821M160K022 0.243 0.124 2.80 3.90 30x30820 380L821M160K042 0.243 0.124 3.20 4.50 30x40820 380L821M160A022 0.243 0.124 3.10 4.40 35x30

1000 380LX102M160J452 0.199 0.102 3.00 4.20 25x451000 380LX102M160K032 0.199 0.102 3.00 4.20 30x351000 380LX102M160A022 0.199 0.102 4.30 6.00 35x301000 380LX102M160H452 0.216 0.108 3.00 4.20 22x451000 380LX102M160J042 0.216 0.108 3.00 4.20 25x401000 380LX102M160K022 0.216 0.108 3.00 4.20 30x301200 380LX122M160J052 0.166 0.085 3.30 4.60 25x501200 380LX122M160K032 0.166 0.085 3.30 4.60 30x351200 380L122M160K052 0.166 0.085 4.20 5.90 30x501200 380LX122M160A022 0.166 0.085 3.70 5.20 35x301200 380L122M160A042 0.166 0.085 3.30 4.60 35x401500 380LX152M160K452 0.133 0.068 3.70 5.20 30x451500 380LX152M160A032 0.133 0.068 4.20 5.90 35x351500 380LX152M160J052 0.166 0.091 3.73 5.22 25x501500 380LX152M160A022 0.166 0.091 3.73 5.22 35x301800 380LX182M160K052 0.111 0.057 4.20 5.90 30x501800 380LX182M160A042 0.111 0.057 4.80 6.70 35x401800 380LX182M160A032 0.138 0.083 4.20 5.88 35x352200 380LX222M160A452 0.090 0.046 5.50 7.60 35x452200 380LX222M160K052 0.105 0.053 4.78 6.69 30x502200 380LX222M160A042 0.105 0.053 4.78 6.69 35x402700 380LX272M160A052 0.074 0.038 5.50 7.60 35x503300 380LX332M160A072 0.054 0.027 4.80 6.20 35x703300 382L332M160N062 0.054 0.027 5.00 6.50 40x633900 380LX392M160A082 0.046 0.023 5.40 7.10 35x804700 382L472M160N082 0.036 0.020 6.60 8.50 40x80


180 380L181M180H012 1.105 0.564 0.80 1.10 22x25270 380L271M180H022 0.737 0.376 1.00 1.30 22x30270 380L271M180J012 0.737 0.376 1.00 1.30 25x25330 380LX331M180G022 0.603 0.308 1.80 2.50 20x30330 380LX331M180H012 0.603 0.308 1.80 2.50 22x25330 380L331M180H032 0.603 0.308 1.00 1.40 22x35330 380L331M180J022 0.603 0.308 1.00 1.40 25x30


390 380LX391M180G032 0.510 0.260 1.20 1.60 20x35390 380LX391M180H022 0.510 0.260 1.20 1.60 22x30390 380L391M180H042 0.510 0.260 1.20 1.60 22x40390 380LX391M180J012 0.510 0.260 1.20 1.60 25x25390 380L391M180J032 0.510 0.260 1.20 1.60 25x35390 380L391M180K012 0.510 0.260 1.20 1.60 30x25470 380LX471M180G042 0.423 0.216 2.10 2.90 20x40470 380LX471M180H032 0.423 0.216 2.10 2.90 22x35470 380LX471M180J012 0.423 0.216 2.10 2.90 25x25560 380LX561M180H032 0.355 0.181 2.30 3.20 22x35560 380L561M180H052 0.355 0.181 1.40 1.90 22x50560 380LX561M180J022 0.355 0.181 2.30 3.20 25x30560 380L561M180J042 0.355 0.181 1.40 1.90 25x40560 380L561M180K022 0.355 0.181 1.40 1.90 30x30560 380L561M180A012 0.355 0.181 1.40 1.90 35x25680 380LX681M180H042 0.293 0.149 2.50 3.50 22x40680 380LX681M180J032 0.293 0.149 2.50 3.50 25x35680 380LX681M180K022 0.293 0.149 2.50 3.50 30x30820 380LX821M180H452 0.243 0.124 2.80 3.90 22x45820 380LX821M180J042 0.243 0.124 2.80 3.90 25x40820 380L821M180J052 0.243 0.124 1.60 2.20 25x50820 380LX821M180K022 0.243 0.124 2.80 3.90 30x30820 380L821M180K042 0.243 0.124 1.60 2.20 30x40820 380L821M180A022 0.243 0.124 1.60 2.20 35x30

1000 380LX102M180J452 0.199 0.102 3.00 4.20 25x451000 380LX102M180K032 0.199 0.102 3.00 4.20 30x351200 380LX122M180J052 0.166 0.085 3.30 4.60 25x501200 380LX122M180K042 0.166 0.085 3.30 4.60 30x401200 380L122M180K052 0.166 0.085 2.00 2.80 30x501200 380LX122M180A032 0.166 0.085 3.30 4.60 35x351200 380L122M180A042 0.166 0.085 2.00 2.80 35x401500 380LX152M180K452 0.133 0.068 3.80 5.40 30x451500 380LX152M180A042 0.133 0.068 3.80 5.40 35x401800 380LX182M180K052 0.111 0.057 4.30 6.00 30x501800 380LX182M180A042 0.111 0.057 4.30 6.00 35x402200 380LX222M180A052 0.090 0.046 4.90 6.90 35x502700 382L272M180N062 0.051 0.027 5.00 6.50 40x632700 380L272M180A072 0.054 0.027 4.80 6.20 35x703300 380L332M180A082 0.046 0.023 5.40 7.10 35x804700 382L472M180N082 0.036 0.020 6.60 8.50 40x80


150 380LX151M200H202 1.326 0.677 0.70 0.90 22x20150 380L151M200H012 1.326 0.677 1.00 1.50 22x25220 380L221M200H012 0.904 0.461 1.10 1.60 22x25220 380L221M200H022 0.904 0.461 1.20 1.70 22x30220 380LX221M200J202 0.904 0.461 0.90 1.20 25x20220 380L221M200J012 0.904 0.461 1.20 1.70 25x25270 380LX271M200G022 0.737 0.376 1.40 2.00 20x30270 380LX271M200H012 0.737 0.376 1.40 2.00 22x25330 380LX331M200H012 0.553 0.249 1.56 2.18 22x25330 380LX331M200G032 0.603 0.308 1.60 2.20 20x35330 380LX331M200H022 0.603 0.308 1.60 2.20 22x30330 380L331M200H042 0.603 0.308 1.70 2.40 22x40330 380LX331M200J012 0.603 0.308 1.60 2.20 25x25330 380L331M200J022 0.603 0.308 1.60 2.30 25x30330 380LX331M200K202 0.603 0.308 1.00 1.40 30x20330 380L331M200K012 0.603 0.308 1.70 2.40 30x25390 380LX391M200H022 0.510 0.260 1.70 2.40 22x30390 380LX391M200J012 0.510 0.260 1.70 2.40 25x25470 380LX471M200G042 0.388 0.175 1.85 2.59 20x40470 380LX471M200H032 0.423 0.216 1.90 2.60 22x35470 380L471M200H052 0.423 0.216 2.30 3.20 22x50470 380LX471M200J022 0.423 0.216 1.90 2.60 25x30470 380L471M200J042 0.423 0.216 2.20 3.10 25x40470 380LX471M200K012 0.423 0.216 1.90 2.60 30x25


CORNELLDUBILIER





Alum

inum

Snap

-InCa

paci

tors


470 380L471M200K022 0.423 0.216 2.20 3.00 30x30470 380LX471M200A202 0.423 0.216 1.30 1.80 35x20560 380LX561M200J022 0.326 0.147 2.43 3.40 25x30560 380LX561M200H042 0.355 0.181 2.40 3.40 22x40560 380LX561M200J032 0.355 0.181 2.40 3.40 25x35560 380LX561M200K012 0.355 0.181 2.40 3.40 30x25680 380LX681M200H452 0.293 0.149 2.70 3.80 22x45680 380LX681M200J032 0.293 0.149 2.70 3.80 25x35680 380L681M200J052 0.293 0.149 2.90 4.10 25x50680 380LX681M200K022 0.293 0.149 2.70 3.80 30x30680 380L681M200K042 0.293 0.149 2.90 4.10 30x40680 380L681M200A022 0.293 0.149 2.90 4.10 35x30820 380LX821M200K022 0.222 0.100 2.93 4.10 30x30820 380LX821M200J452 0.243 0.124 2.90 4.10 25x45820 380LX821M200K032 0.243 0.124 2.90 4.10 30x35820 380LX821M200A012 0.243 0.124 2.90 4.10 35x25

1000 380LX102M200J452 0.199 0.090 3.25 4.55 25x451000 380LX102M200J052 0.199 0.102 3.30 4.60 25x501000 380LX102M200K032 0.199 0.090 3.25 4.55 30x351000 380LX102M200K042 0.199 0.102 3.30 4.60 30x401000 380L102M200K052 0.199 0.102 3.90 5.40 30x501000 380LX102M200A022 0.199 0.102 3.30 4.60 35x301000 380L102M200A042 0.199 0.102 3.90 5.40 35x401200 380LX122M200K042 0.166 0.075 3.50 4.90 30x401200 380LX122M200K452 0.166 0.085 3.50 4.90 30x451200 380LX122M200A022 0.166 0.075 3.50 4.90 35x301200 380LX122M200A032 0.166 0.085 3.50 4.90 35x351200 380L122M200A0522 0.166 0.085 4.70 6.50 35x501500 380LX152M200K052 0.133 0.068 3.90 5.40 30x501500 380LX152M200A042 0.133 0.068 3.90 5.40 35x401500 380LX152M200K452 0.144 0.072 3.87 5.42 30x451500 380LX152M200A032 0.144 0.072 3.87 5.42 35x351800 380LX182M200A452 0.111 0.057 4.30 6.00 35x451800 380LX182M200K052 0.120 0.060 4.32 6.05 30x501800 380LX182M200A042 0.120 0.060 4.32 6.05 35x402200 380LX222M200A052 0.090 0.046 4.90 6.90 35x502200 380LX222M200A452 0.098 0.054 4.92 6.89 35x452200 382LX222M200N042 0.098 0.054 4.92 6.89 40x402700 382L272M200N062 0.051 0.027 5.00 6.50 40x632700 380L272M200A072 0.054 0.027 4.80 6.20 35x702700 380LX272M200A062 0.092 0.027 5.40 7.60 35x632700 382LX272M200N052 0.092 0.046 5.40 7.60 40x503300 380LX332M200A082 0.075 0.038 5.90 8.30 35x803300 382LX332M200N062 0.075 0.038 5.90 8.30 40x633900 382LX392M200B052V 0.055 0.030 8.22 9.45 50x503900 382LX392M200N082 0.064 0.033 6.40 9.00 40x804700 382LX472M200N082 0.046 0.025 8.38 11.73 40x804700 382LX472M200B062V 0.046 0.025 9.32 13.05 50x635600 380LX562M200A102 0.038 0.021 8.90 12.46 35x1056800 382LX682M200N102 0.032 0.017 8.65 12.11 40x1056800 382LX682M200B082V 0.032 0.017 11.41 15.97 50x807500 382LX752M200B092V 0.029 0.016 12.28 17.19 50x928200 382LX822M200B102V 0.026 0.014 13.16 18.42 50x105


120 380LX121M250H202 1.658 0.846 0.50 0.60 22x20120 380L121M250H012 1.658 0.846 0.60 0.90 22x25150 380L151M250H022 1.326 0.677 0.90 1.20 22x30150 380LX151M250J202 1.326 0.677 0.70 0.90 25x20150 380L151M250J012 1.326 0.677 0.90 1.20 25x25180 380LX181M250G022 1.105 0.546 1.10 1.50 20x30180 380LX181M250H012 1.105 0.546 1.10 1.50 22x25220 380LX221M250H012 0.754 0.301 1.17 1.64 22x25220 380LX221M250G032 0.904 0.461 1.20 1.60 20x35220 380LX221M250H022 0.904 0.461 1.20 1.60 22x30


220 380L221M250H042 0.904 0.461 1.00 1.40 22x40220 380LX221M250J012 0.904 0.461 1.20 1.60 25x25220 380L221M250J022 0.904 0.461 1.00 1.40 25x30220 380LX221M250K202 0.904 0.461 0.90 1.20 30x20220 380L221M250K012 0.904 0.461 1.00 1.40 30x25270 380LX271M250H022 0.737 0.376 1.30 1.80 22x30270 380LX271M250J012 0.737 0.376 1.30 1.80 25x25330 380LX331M250H032 0.603 0.308 1.80 2.50 22x35330 380L331M250H052 0.603 0.308 1.40 1.90 22x50330 380LX331M250J022 0.603 0.308 1.80 2.50 25x30330 380L331M250J042 0.603 0.308 1.30 1.90 25x40330 380LX331M250K012 0.603 0.308 1.80 2.50 30x25330 380L331M250K022 0.603 0.308 1.30 1.90 30x30330 380LX331M250A202 0.603 0.308 1.10 1.50 35x20390 380LX391M250J022 0.468 0.187 1.91 2.67 25x30390 380LX391M250H042 0.510 0.260 1.90 2.70 22x40390 380LX391M250J032 0.510 0.260 1.90 2.70 25x35390 380LX391M250K012 0.510 0.260 1.90 2.70 30x25470 380LX471M250K012 0.353 0.141 2.11 2.95 30x25470 380LX471M250H452 0.423 0.216 2.10 3.00 22x45470 380LX471M250J032 0.423 0.216 2.10 3.00 25x35470 380LX471M250J042 0.423 0.216 2.10 3.00 25x40470 380L471M250J052 0.423 0.216 1.80 2.50 25x50470 380LX471M250K022 0.423 0.216 2.10 3.00 30x30470 380L471M250K042 0.423 0.216 1.80 2.50 30x40470 380L471M250A022 0.423 0.216 1.70 2.40 35x30560 380LX561M250J042 0.326 0.130 2.25 3.15 25x40560 380LX561M250K022 0.326 0.130 2.25 3.15 30x30560 380LX561M250J452 0.355 0.181 2.30 3.20 25x45560 380LX561M250K032 0.355 0.181 2.30 3.20 30x35560 380LX561M250A012 0.355 0.181 2.30 3.20 35x25680 380LX681M250J452 0.268 0.107 2.50 3.50 25x45680 380LX681M250K032 0.268 0.107 2.50 3.50 30x35680 380LX681M250J052 0.293 0.149 2.50 3.50 25x50680 380LX681M250K042 0.293 0.149 2.50 3.50 30x40680 380L681M250K052 0.293 0.149 2.40 3.30 30x50680 380LX681M250A022 0.293 0.149 2.50 3.50 35x30680 380L681M250A042 0.293 0.149 2.30 3.30 35x40820 380LX821M250K042 0.222 0.089 2.77 3.88 30x40820 380LX821M250A022 0.222 0.089 2.77 3.88 35x30820 380LX821M250K452 0.243 0.124 2.80 3.90 30x45820 380LX821M250A032 0.243 0.124 2.80 3.90 35x35

1000 380LX102M250K452 0.182 0.073 3.32 4.65 30x451000 380LX102M250A032 0.182 0.073 3.32 4.65 35x351000 380LX102M250K052 0.199 0.102 3.30 4.60 30x501000 380LX102M250A042 0.199 0.102 3.30 4.60 35x401000 380L102M250A052 0.199 0.102 3.10 4.40 35x501200 380LX122M250A042 0.166 0.083 3.53 4.94 35x401200 380LX122M250A452 0.166 0.085 3.50 4.90 35x451500 380LX152M250A052 0.133 0.068 4.00 5.70 35x501500 382LX152M250N042 0.133 0.066 4.04 5.66 40x401800 382L182M250N062 0.062 0.030 4.80 6.40 40x631800 380L182M250A072 0.066 0.030 4.50 6.20 35x701800 380LX182M250A062 0.138 0.073 4.50 6.20 35x631800 382LX182M250N052 0.138 0.073 4.50 6.30 40x502200 380LX222M250A082 0.113 0.057 4.90 6.90 35x802200 382LX222M250N062 0.113 0.057 4.90 6.90 40x632700 382L272M250N082 0.043 0.021 6.30 8.40 40x802700 382LX272M250B052V 0.074 0.037 6.77 7.79 50x503300 382LX332M250N082 0.060 0.030 7.00 9.80 40x803300 382LX332M250B062V 0.060 0.030 7.79 10.91 50x633900 380LX392M250A102 0.051 0.026 7.47 10.46 35x1054700 382LX472M250N102 0.042 0.021 8.88 12.43 40x1054700 382LX472M250B082V 0.042 0.021 9.65 13.51 50x805600 382LX562M250B092V 0.036 0.018 10.80 15.12 50x926800 382LX682M250B102V 0.029 0.015 12.16 17.02 50x105




CORNELLDUBILIER





Aluminum

Snap-InCapacitors


CORNELLDUBILIER



220 380LX221M350J032 0.754 0.264 1.44 2.02 25x35220 380LX221M350K012 0.754 0.264 1.44 2.02 30x25220 380LX221M350H452 0.904 0.461 1.40 2.00 22x45220 380L221M350H052 0.904 0.461 0.70 0.90 22x50220 380LX221M350J042 0.904 0.461 1.40 2.00 25x40220 380L221M350J052 0.904 0.461 0.70 0.90 25x50220 380LX221M350K022 0.904 0.461 1.40 2.00 30x30220 380L221M350K032 0.904 0.461 0.70 0.90 30x35220 380L221M350A012 0.904 0.461 0.70 0.90 35x25220 380LX221M350A012 0.904 0.461 1.40 2.00 35x25270 380LX271M350J042 0.614 0.215 1.66 2.32 25x40270 380LX271M350K022 0.614 0.215 1.66 2.32 30x30270 380LX271M350A012 0.614 0.215 1.66 2.32 35x25270 380LX271M350J452 0.737 0.376 1.70 2.30 25x45270 380L271M350J052 0.737 0.376 0.80 1.10 25x50270 380LX271M350K032 0.737 0.376 1.70 2.30 30x35270 380LX271M350K042 0.737 0.376 0.80 1.10 30x40270 380LX271M350A012 0.737 0.376 1.70 2.30 35x25270 380LX271M350A022 0.737 0.376 1.70 2.30 35x30330 380LX331M350K032 0.502 0.178 1.88 2.63 30x35330 380LX331M350J052 0.603 0.308 1.90 2.60 25x50330 380LX331M350K042 0.603 0.308 1.90 2.60 30x40330 380L331M350K052 0.603 0.308 0.80 1.10 30x50330 380LX331M350A022 0.603 0.308 1.90 2.60 35x30330 380L331M350A032 0.603 0.308 0.80 1.10 35x35390 380LX391M350J052 0.425 0.149 2.06 2.88 25x50390 380LX391M350K042 0.425 0.149 2.06 2.88 30x40390 380LX391M350A022 0.425 0.149 2.06 2.88 35x30390 380LX391M350K452 0.510 0.260 2.10 2.90 30x45390 380L391M350K052 0.510 0.260 0.90 1.20 30x50390 380LX391M350A032 0.510 0.260 2.10 2.90 35x35390 380L391M350A042 0.510 0.260 0.90 1.20 35x40470 380LX471M350A032 0.353 0.123 2.40 3.36 35x35470 380LX471M350K052 0.423 0.216 2.40 3.40 30x50470 380LX471M350A042 0.423 0.216 2.40 3.40 35x40560 380LX561M350K052 0.326 0.114 2.60 3.64 30x50560 380LX561M350A042 0.326 0.114 2.60 3.64 35x40560 380LX561M350A452 0.355 0.181 2.60 3.60 35x45680 380LX681M350A452 0.293 0.117 2.96 4.14 35x45680 380LX681M350A052 0.293 0.149 3.00 4.10 35x50680 382L681M350N042 0.331 0.179 2.00 3.00 40x40820 380LX821M350A052 0.243 0.097 3.55 4.97 35x50820 380L821M350A062 0.254 0.134 2.40 3.50 35x63

1000 380L102M350A072 0.212 0.112 2.80 4.00 35x701000 380LX102M350A062 0.249 0.127 3.20 4.50 35x631000 382LX102M350N052 0.249 0.127 3.20 4.50 40x501200 380LX122M350A082 0.207 0.106 3.60 5.10 35x801200 382LX122M350N062 0.207 0.106 3.60 5.10 40x631200 382LX122M350B052V 0.207 0.093 5.18 5.96 50x501500 382LX152M350B062V 0.166 0.075 6.01 8.41 50x631800 382L182M350N082 0.132 0.072 4.00 5.70 40x801800 380LX182M350A102 0.138 0.062 5.79 8.11 35x1051800 382LX182M350B082V 0.138 0.062 6.89 9.65 50x802200 382LX222M350N102 0.113 0.051 6.91 9.67 40x1052200 382LX222M350B092V 0.113 0.051 7.79 10.91 50x922700 382LX272M350B102V 0.092 0.041 8.80 12.32 50x105


47 380LX470M400H202 4.233 2.160 0.30 0.40 22x2047 380L470M400H012 4.233 2.160 0.50 0.80 22x2568 380LX680M400G022 2.926 1.493 0.80 1.10 20x3068 380LX680M400H012 2.926 1.493 0.80 1.10 22x2568 380L680M400H022 2.926 1.493 0.70 1.00 22x3068 380LX680M400J202 2.926 1.493 0.40 0.50 25x2068 380L680M400J012 2.926 1.493 0.70 1.00 25x2582 380LX820M400G022 2.426 1.238 0.80 1.20 20x30

Types 380L, 380LX, and 382LX, 85 C High-Capacitance Snap-In



100 380LX101M315G022 1.989 1.015 0.90 1.30 20x30100 380LX101M315H012 1.989 1.015 0.90 1.30 22x25120 380LX121M315G042 1.658 0.856 1.00 1.40 20x40120 380LX121M315H022 1.658 0.856 1.00 1.40 22x30120 380LX121M315J012 1.658 0.856 1.00 1.40 25x25150 380LX151M315H022 1.326 0.677 1.10 1.60 22x30150 380LX151M315J012 1.326 0.677 1.10 1.60 25x25180 380LX181M315H032 1.105 0.546 1.20 1.70 22x35180 380LX181M315J022 1.105 0.546 1.20 1.70 25x30180 380LX181M315K012 1.105 0.546 1.20 1.70 30x25220 380LX221M315H042 0.904 0.461 1.40 2.00 22x40220 380LX221M315J032 0.904 0.461 1.40 2.00 25x35220 380LX221M315K012 0.904 0.461 1.40 2.00 30x25270 380LX271M315H452 0.737 0.376 1.60 2.20 22x45270 380LX271M315J042 0.737 0.376 1.60 2.20 25x40270 380LX271M315K022 0.737 0.376 1.60 2.20 30x30330 380LX331M315J452 0.603 0.308 1.80 2.50 25x45330 380LX331M315K022 0.603 0.308 1.80 2.50 30x30330 380LX331M315A012 0.603 0.308 1.80 2.50 35x25390 380LX391M315J052 0.510 0.260 2.00 2.80 25x50390 380LX391M315K032 0.510 0.260 2.00 2.80 30x35390 380LX391M315A022 0.510 0.260 2.00 2.80 35x30470 380LX471M315K042 0.423 0.216 2.30 3.20 30x40470 380LX471M315A032 0.423 0.216 2.30 3.20 35x35560 380LX561M315K452 0.355 0.181 2.60 3.60 30x45560 380LX561M315A032 0.355 0.181 2.60 3.60 35x35680 380LX681M315A452 0.293 0.149 2.90 4.00 35x45820 380LX821M315A052 0.243 0.124 3.30 4.60 35x50820 382L821M315N042 0.285 0.172 2.40 3.10 40x40

1000 380L102M315A062 0.218 0.129 2.70 3.60 35x631200 380L122M315A072 0.182 0.107 3.20 4.20 35x701200 382L122M315N052 0.202 0.122 2.90 3.90 40x501500 380L152M315A082 0.153 0.090 3.60 4.80 35x801500 382L152M315N062 0.162 0.098 3.40 4.50 40x631800 382L182M315N082 0.113 0.069 4.50 6.00 40x80


56 380L560M350H012 3.553 1.812 0.30 0.40 22x2568 380L680M350H012 2.926 1.493 0.30 0.40 22x2582 380LX820M350H012 2.022 0.708 0.83 1.16 22x2582 380LX820M350G022 2.426 1.238 0.80 1.20 20x3082 380LX820M350H012 2.426 1.238 0.80 1.20 22x2582 380L820M350H022 2.426 1.238 0.40 0.50 22x3082 380L820M350J012 2.426 1.238 0.40 0.50 25x25

100 380LX101M350G032 1.989 1.015 0.90 1.30 20x35100 380L101M350H022 1.989 1.015 0.40 0.50 22x30100 380LX101M350H022 1.989 1.015 0.90 1.30 22x30120 380LX121M350H022 1.382 0.484 1.00 1.40 22x30120 380LX121M350H022 1.658 0.846 1.00 1.40 22x30120 380L121M350H032 1.658 0.846 0.50 0.70 22x35120 380LX121M350J012 1.658 0.846 1.00 1.40 25x25120 380L121M350J022 1.658 0.846 0.50 0.70 25x30120 380L121M350K012 1.658 0.846 0.50 0.70 30x25150 380LX151M350J012 1.105 0.387 1.12 1.57 25x25150 380LX151M350H032 1.326 0.677 1.10 1.60 22x35150 380L151M350H042 1.326 0.677 0.50 0.70 22x40150 380LX151M350J022 1.326 0.677 1.10 1.60 25x30150 380L151M350J012 1.326 0.677 0.50 0.70 25x35150 380L151M350K012 1.326 0.677 0.50 0.70 30x25150 380LX151M350K012 1.326 0.677 1.10 1.60 30x25180 380LX181M350J022 0.921 0.322 1.22 1.71 25x30180 380LX181M350H042 1.105 0.546 1.20 1.70 22x40180 380LX181M350J032 1.105 0.546 1.20 1.70 25x35180 380L181M350J042 1.105 0.546 0.60 0.80 25x40180 380LX181M350K012 1.105 0.546 1.20 1.70 30x25180 380L181M350K022 1.105 0.546 0.60 0.80 30x30


Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER



47 380L470M450H022 4.233 2.160 0.60 0.80 22x3047 380LX470M450J202 4.233 2.160 0.30 0.40 25x2047 380L470M450J012 4.233 2.160 0.60 0.80 25x2556 380LX560M450G022 3.553 1.813 0.70 1.00 20x3056 380LX560M450H012 3.553 1.813 0.70 1.00 22x2568 380LX680M450G032 2.926 1.493 0.80 1.10 20x3568 380LX680M450H022 2.926 1.493 0.80 1.10 22x3068 380L680M450H042 2.926 1.493 0.80 1.10 22x4068 380L680M450J022 2.926 1.493 0.80 1.10 25x3068 380LX680M450K202 2.926 1.493 0.40 0.50 30x2068 380L680M450K012 2.926 1.493 0.80 1.10 30x2582 380LX820M450G032 2.426 1.238 0.80 1.20 20x3582 380LX820M450H022 2.426 1.238 0.80 1.20 22x3082 380LX820M450J012 2.426 1.238 0.80 1.20 25x25

100 380LX101M450H032 1.989 1.015 0.90 1.30 22x35100 380L101M450H052 1.989 1.015 1.10 1.50 22x50100 380LX101M450J022 1.989 1.015 0.90 1.30 25x30100 380L101M450J042 1.989 1.015 1.00 1.40 25x40100 380LX101M450K012 1.989 1.015 0.90 1.30 30x25100 380L101M450K022 1.989 1.015 1.00 1.40 30x30100 380LX101M450A202 1.989 1.015 0.50 0.70 35x20120 380LX121M450H042 1.658 0.859 1.00 1.50 22x40120 380LX121M450J022 1.658 0.859 1.00 1.50 25x30120 380LX121M450K012 1.658 0.859 1.00 1.50 30x25150 380LX151M450H052 1.326 0.677 1.20 1.70 22x50150 380LX151M450J042 1.326 0.677 1.20 1.70 25x40150 380L151M450J052 1.326 0.677 1.40 1.90 25x50150 380LX151M450K022 1.326 0.677 1.20 1.70 30x30150 380L151M450K042 1.326 0.677 1.40 1.90 30x40150 380L151M450A022 1.326 0.677 1.40 1.90 35x30180 380LX181M450J042 0.921 0.368 1.35 1.89 25x40180 380LX181M450K022 0.921 0.368 1.35 1.89 30x30180 380LX181M450J452 1.105 0.564 1.40 1.90 25x45180 380XL181M450K032 1.105 0.564 1.40 1.90 30x35180 380LX181M450A012 1.105 0.564 1.40 1.90 35x25220 380LX221M450J452 0.754 0.301 1.55 2.17 25x45220 380LX221M450K032 0.754 0.301 1.55 2.17 30x35220 380LX221M450J052 0.904 0.461 1.60 2.20 25x50220 380LX221M450K042 0.904 0.461 1.60 2.20 30x40220 380L221M450K052 0.904 0.461 1.90 2.60 30x50220 380LX221M450A022 0.904 0.461 1.60 2.20 35x30220 380L221M450A042 0.904 0.461 1.90 2.60 35x40270 380LX271M450A022 0.614 0.246 1.78 2.49 35x30270 380LX271M450K452 0.737 0.376 1.80 2.50 30x45270 380LX271M450A032 0.737 0.376 1.80 2.50 35x35330 380LX331M450A032 0.553 0.221 2.01 2.81 35x35330 380LX331M450K052 0.603 0.308 2.00 2.80 30x50330 380LX331M450A042 0.603 0.308 2.00 2.80 35x40330 380L331M450A052 0.603 0.308 2.50 3.50 35x50390 380LX391M450A452 0.510 0.260 2.20 3.10 35x45470 380LX471M450A452 0.423 0.233 2.53 3.54 35x45470 380LX471M450A052 0.423 0.216 2.50 3.50 35x50470 382LX471M450N042 0.423 0.233 2.53 3.54 40x40560 382L561M450N052 0.250 0.135 2.90 3.90 40x50560 380L561M450A062 0.271 0.143 2.70 3.60 35x63560 380LX561M450A052 0.355 0.171 2.50 3.50 35x50680 382L681M450N062 0.201 0.109 3.40 4.50 40x63680 380L681M450A072 0.226 0.120 3.20 4.20 35x70680 382LX681M450N052 0.366 0.187 3.00 4.20 40x50820 380L821M450A082 0.189 0.100 3.60 4.80 35x80820 382LX821M450B052V 0.263 0.145 4.31 4.96 50x50820 382LX821M450N062 0.303 0.153 3.20 4.50 40x63

1000 382LX102M450B062V 0.216 0.119 4.96 6.94 50x631200 382L122M450N082 0.140 0.077 4.50 6.00 40x801200 380LX122M450A102 0.166 0.091 4.80 6.72 35x1051200 382LX122M450B082V 0.180 0.099 5.71 7.99 50x80




82 380LX820M400H012 2.426 1.238 0.80 1.20 22x25100 380LX101M400G032 1.989 1.050 0.90 1.30 20x35100 380LX101M400H022 1.989 1.050 0.90 1.30 22x30100 380L101M400H042 1.989 1.050 0.90 1.30 22x40100 380LX101M400J012 1.989 1.050 0.90 1.30 25x25100 380L101M400J022 1.989 1.050 0.90 1.30 25x30100 380LX101M400K202 1.989 1.050 0.50 0.70 30x20100 380L101M400K012 1.989 1.050 0.90 1.30 30x25120 380LX121M400J012 1.382 0.484 1.02 1.43 25x25120 380LX121M400G042 1.658 0.846 1.00 1.40 20x40120 380LX121M400H032 1.658 0.846 1.00 1.40 22x35120 380LX121M400J022 1.658 0.846 1.00 1.40 25x30150 380LX151M400H042 1.326 0.677 1.20 1.60 22x40150 380L151M400H052 1.326 0.677 1.30 1.80 22x50150 380LX151M400J022 1.326 0.677 1.20 1.60 25x30150 380L151M400J042 1.326 0.677 1.30 1.80 25x40150 380LX151M400K012 1.326 0.677 1.20 1.60 30x25150 380L151M400K022 1.326 0.677 1.20 1.70 30x30150 380LX151M400A202 1.326 0.677 0.60 0.80 35x20180 380LX181M400J022 0.921 0.322 1.44 2.02 25x30180 380LX181M400H452 1.105 0.546 1.40 2.00 22x45180 380LX181M400J032 1.105 0.546 1.40 2.00 25x35180 380LX181M400K022 1.105 0.546 1.40 2.00 30x30220 380LX221M400H052 0.904 0.461 1.50 2.10 22x50220 380LX221M400J042 0.904 0.461 1.50 2.10 25x40220 380L221M400J052 0.904 0.461 1.70 2.40 25x50220 380LX221M400K022 0.904 0.461 1.50 2.10 30x30220 380L221M400K042 0.904 0.461 1.70 2.40 30x40220 380L221M400A022 0.904 0.461 1.60 2.30 35x30270 380LX271M400J452 0.737 0.376 1.70 2.30 25x45270 380LX271M400K032 0.737 0.376 1.70 2.30 30x35270 380L271M400K052 0.737 0.371 2.00 2.90 30x50270 380LX271M400A022 0.737 0.376 1.70 2.30 35x30270 380L271M400A042 0.737 0.376 2.00 2.90 35x40330 380LX331M400A022 0.553 0.193 1.90 2.66 35x30330 380LX331M400K042 0.603 0.308 1.90 2.70 30x40330 380LX331M400A032 0.603 0.308 1.90 2.70 35x35390 380LX391M400A032 0.468 0.164 2.13 2.98 35x35390 380LX391M400K452 0.510 0.260 2.10 3.00 30x45390 380LX391M400A042 0.510 0.260 2.10 3.00 35x40390 380L391M400A052 0.510 0.260 2.70 3.80 35x50470 380LX471M400A042 0.388 0.136 2.39 3.35 35x40470 380LX471M400A452 0.423 0.216 2.40 3.30 35x45560 380LX561M400A452 0.326 0.114 2.69 3.77 35x45560 382L561M400N042 0.334 0.189 2.40 3.10 40x40560 380LX561M400A052 0.355 0.216 2.70 3.80 35x50680 380LX681M400A052 0.295 0.148 2.90 4.10 35x50820 380L821M400A072 0.214 0.118 3.20 4.20 35x70820 380LX821M400A062 0.222 0.078 3.55 4.97 35x63820 382LX821M400N052 0.303 0.155 3.20 4.50 40x50

1000 380L102M400A082 0.179 0.099 3.60 4.80 35x801000 382LX102M400B052V 0.199 0.080 4.76 5.47 50x501000 382LX102M400N062 0.249 0.127 3.40 4.80 40x631200 380LX122M400A082 0.152 0.053 4.52 6.33 35x801200 382LX122M400N062 0.152 0.053 4.52 6.33 40x631200 382LX122M400B062V 0.166 0.066 5.47 7.66 50x631500 380LX152M400A102 0.122 0.043 5.44 7.62 35x1051500 382L152M400N082 0.133 0.075 4.50 6.00 40x801500 382LX152M400B082V 0.133 0.053 6.47 9.06 50x801800 382LX182M400N102 0.101 0.035 6.53 9.14 40x1051800 382LX182M400B092V 0.111 0.044 7.35 10.29 50x922200 382LX222M400B102V 0.090 0.036 8.43 11.80 50x105


33 380LX330M450H202 6.029 3.080 0.20 0.30 22x2033 380L330M450H012 6.029 3.080 0.50 0.70 22x25



Types 380L, 380LX, and 382LX, 85 C High-Capacitance Snap-In

CORNELLDUBILIER


Aluminum

Snap-InCapacitors


150 380LX151M500A012 1.105 0.442 1.29 1.80 35x25180 380LX181M500A032 0.912 0.555 1.60 2.20 35x35180 380LX181M500J052 0.921 0.388 1.38 1.93 25x50180 380LX181M500A022 0.921 0.388 1.38 1.93 35x30220 380LX221M500K052 0.654 0.397 2.00 2.70 30x50220 380LX221M500A042 0.749 0.456 1.90 2.50 35x40220 380LX221M500K452 0.754 0.339 1.50 2.10 30x45220 380LX221M500A032 0.754 0.339 1.50 2.10 35x35270 380LX271M500A052 0.529 0.322 2.30 3.10 35x50270 382L271M500N042 0.549 0.342 2.40 3.20 40x40270 380LX271M500A042 0.614 0.278 1.76 2.46 35x40330 380LX331M500A452 0.502 0.251 1.99 2.79 35x45330 382LX331M500N042 0.502 0.276 1.99 2.79 40x40390 382L391M500N052 0.388 0.242 2.90 3.90 40x50390 380LX391M500A062 0.423 0.257 2.70 3.60 35x63390 380LX391M500A052 0.425 0.234 2.22 3.11 35x50470 382L471M500N062 0.311 0.194 3.40 4.50 40x63470 380LX471M500A062 0.353 0.194 2.58 3.61 35x63470 380LX471M500A072 0.353 0.215 3.20 4.20 35x70470 382LX471M500N052 0.353 0.194 2.70 3.78 40x50560 380LX561M500A082 0.295 0.179 3.60 4.80 35x80560 382LX561M500N062 0.326 0.179 3.11 4.35 40x63560 382LX561M500B052V 0.355 0.195 3.52 4.05 50x50680 382L681M500N082 0.218 0.135 4.50 6.00 40x80680 380LX681M500N0822 0.244 0.134 3.21 4.49 35x80680 382LX681M500B062V 0.293 0.161 4.07 5.70 50x63820 380LX821M500A102 0.202 0.111 3.97 5.56 35x105820 382LX821M500N082 0.222 0.122 3.88 5.43 40x80

1000 382LX102M500B082V 0.199 0.109 5.05 7.07 50x801200 382LX122M500N102 0.152 0.084 5.90 8.26 40x1051200 382LX122M500B092V 0.166 0.091 5.74 8.04 50x921500 382LX152M500B102V 0.144 0.079 6.65 9.31 50x105



1500 382LX152M450N102V 0.133 0.073 5.81 8.13 40x1051500 382LX152M450B092V 0.144 0.079 6.55 9.17 50x921800 382LX182M450B102V 0.120 0.066 7.38 10.30 50x105


33 380LX330M500H012 3.850 2.353 0.60 0.80 22x2547 380LX470M500H012 2.800 1.716 0.60 0.80 22x2547 380LX470M500J012 2.830 1.742 0.60 0.80 25x2556 380LX560M500H032 2.250 1.352 0.70 1.00 22x3556 380LX560M500H022 2.980 1.184 0.70 0.98 22x3068 380LX680M500H042 1.860 1.109 0.80 1.10 22x4068 380LX680M500J022 2.080 1.284 0.80 1.10 25x3068 380LX680M500H032 2.438 0.975 0.78 1.09 22x3568 380LX680M500J012 2.438 0.975 0.78 1.09 25x2582 380LX820M500J032 1.630 1.006 0.90 1.20 25x3582 380LX820M500K012 1.960 1.186 0.90 1.20 30x2582 380LX820M500H042 2.022 0.809 0.88 1.23 22x4082 380LX820M500J022 2.022 0.809 0.88 1.23 25x30

100 380LX101M500H052 1.280 0.785 1.00 1.20 22x50100 380LX101M500J042 1.340 0.828 1.10 1.50 25x40100 380LX101M500K022 1.440 0.871 1.10 1.50 30x30100 380LX101M500A012 1.580 0.962 1.10 1.50 35x25100 380LX101M500H452 1.658 0.663 0.99 1.39 22x45100 380LX101M500J032 1.658 0.663 0.99 1.39 25x35120 380LX121M500K032 1.130 0.683 1.40 1.90 30x35120 380LX121M500A022 1.160 0.707 1.40 1.90 35x30120 380LX121M500H052 1.382 0.553 1.13 1.58 22x50120 380LX121M500J042 1.382 0.553 1.13 1.58 25x40120 380LX121M500K022 1.382 0.553 1.13 1.58 30x30150 380LX151M500K042 0.926 0.562 1.60 2.20 30x40150 380LX151M500J052 0.945 0.585 1.40 1.90 25x50150 380LX151M500J452 1.105 0.442 1.29 1.80 25x45


Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER


SpecificationsOperating Temperature: -40°C to + 105°C <250Vdc

-25°C to + 105°C >350VdcRated Voltage: 160 to 450 Vdc

Capacitance: 100 µF to 3300 µF ± 20%Leakage Current: ≤ 3 √CV µA, 4 mA max, 5 minutes


Frequency


EIA Ripple Life: 8000 h at 85 °C, full load per EIA IS-749 Capacitance 10%ESR 200% of limitDCL 100% of limit


Type 381LQ, 105 °C Compact, High-Ripple Snap-in

Type 381LQ is on average 23% smaller and more than 5 mmshorter than Type 381L. This is achieved with a new can-clo-sure method that permits installing capacitor elements intosmaller cans. Approaching the robust capability of the 381L,the new 381LQ enables you to shrink equipment size andretain the original performance.


Highlights New, more capacitance per case Compare to Type 381L

45 °C 60 °C 70 °C 85 °C 105 °C2.35 2.2 2.0 1.7 1.0


0.95 0.98 1.00 1.20 1.25 1.40

Ripple

Type 381LXp 2.074

Type 381LRp 2.087

LifeMORE

Smaller

Type 380LQp 2.054

Aluminum

Snap-InCapacitors


CORNELLDUBILIER


Outline Drawings



J01 25 0.98 25 0.98 20 A01 35 1.38 25 0.98 42J02 25 0.98 30 1.18 24 A02 35 1.38 30 1.18 48J03 25 0.98 35 1.38 27 A03 35 1.38 35 1.38 54J04 25 0.98 40 1.57 31 A04 35 1.38 40 1.57 60J45 25 0.98 45 1.77 35 A45 35 1.38 45 1.77 67J05 25 0.98 50 1.97 38 A05 35 1.38 50 1.97 74


Part Numbering System381LQ 471 M 160 HO1 2


332 = 3300 µF 160 = 160 V450 = 450 V

Ratings

160 Vdc (200 Vdc Surge)470 381LQ471M160H012 0.423 0.190 1.40 1.96 22 x 25560 381LQ561M160H022 0.355 0.160 1.50 2.10 22 x 30680 381LQ681M160H022 0.293 0.132 1.70 2.38 22 x 30680 381LQ681M160J012 0.293 0.132 1.70 2.38 25 x 25820 381LQ821M160H032 0.243 0.109 2.00 2.80 22 x 35820 381LQ821M160J022 0.243 0.109 2.00 2.80 25 x 30

1000 381LQ102M160H042 0.199 0.090 2.20 3.08 22 x 401000 381LQ102M160J032 0.199 0.090 2.20 3.08 25 x 351000 381LQ102M160K012 0.216 0.108 2.20 3.08 30 x 251200 381LQ122M160H452 0.166 0.075 2.30 3.22 22 x 451200 381LQ122M160J042 0.166 0.075 2.30 3.22 25 x 401200 381LQ122M160K022 0.166 0.075 2.30 3.22 30 x 301200 381LQ122M160A012 0.180 0.090 2.30 3.22 35 x 251500 381LQ152M160J452 0.133 0.060 2.50 3.50 25 x 451500 381LQ152M160K032 0.133 0.060 2.50 3.50 30 x 351500 381LQ152M160A022 0.155 0.077 2.50 3.50 35 x 301800 381LQ182M160J052 0.110 0.055 2.70 3.78 25 x 501800 381LQ182M160K042 0.110 0.055 2.70 3.78 30 x 401800 381LQ182M160A022 0.120 0.060 2.70 3.78 35 x 302200 381LQ222M160K452 0.090 0.045 2.90 4.06 30 x 452200 381LQ222M160A032 0.098 0.049 2.90 4.06 35 x 352700 381LQ272M160K052 0.080 0.040 3.10 4.34 30 x 502700 381LQ272M160A042 0.086 0.043 3.10 4.34 35 x 403300 381LQ332M160A052 0.070 0.042 3.30 4.62 35 x 50

180 Vdc (225 Vdc Surge)560 381LQ561M180H022 0.355 0.160 1.50 2.10 22 x 30560 381LQ561M180J012 0.355 0.160 1.50 2.10 25 x 25



680 381LQ681M180H032 0.293 0.132 1.70 2.38 22 x 35680 381LQ681M180J022 0.293 0.132 1.70 2.38 25 x 30820 381LQ821M180H042 0.243 0.109 2.00 2.80 22 x 40820 381LQ821M180J022 0.243 0.109 2.00 2.80 25 x 30820 381LQ821M180K012 0.243 0.109 2.00 2.80 30 x 25

1000 381LQ102M180H452 0.199 0.090 2.20 3.08 22 x 451000 381LQ102M180J042 0.199 0.090 2.20 3.08 25 x 401000 381LQ102M108K022 0.199 0.090 2.20 3.08 30 x 301000 381LQ102M180A012 0.216 0.097 2.20 3.08 35 x 251200 381LQ122M180J452 0.166 0.075 2.30 3.22 25 x 451200 381LQ122M180K032 0.166 0.075 2.30 3.22 30 x 351500 381LQ152M180J052 0.133 0.060 2.50 3.50 25 x 501500 381LQ152M180K042 0.133 0.060 2.50 3.50 30 x 401500 381LQ152M180A022 0.155 0.077 2.50 3.50 35 x 301800 381LQ182M180K452 0.110 0.050 2.70 3.78 30 x 451800 381LQ182M180A032 0.129 0.064 2.70 3.78 35 x 352200 381LQ222M180K052 0.090 0.041 2.90 4.06 30 x 502200 381LQ222M180A042 0.098 0.049 2.90 4.06 35 x 402700 381LQ272M180A052 0.086 0.043 3.10 4.34 35 x 50

200 Vdc (250 Vdc Surge)390 381LQ391M200H012 0.510 0.230 1.31 1.83 22 x 25470 381LQ471M200H022 0.423 0.190 1.45 2.03 22 x 30560 381LQ561M200H022 0.355 0.160 1.67 2.34 22 x 30680 381LQ681M200H042 0.293 0.132 1.75 2.45 22 x 40680 381LQ681M200J022 0.293 0.132 1.75 2.45 25 x 30820 381LQ821M200H452 0.243 0.109 2.04 2.86 22 x 45820 381LQ821M200J032 0.243 0.109 2.04 2.86 25 x 35820 381LQ821M200K012 0.243 0.109 2.04 2.86 30 x 25

1000 381LQ102M200H052 0.199 0.090 2.30 3.22 22 x 50



Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER



Typical Performance CurvesLife Test, 105 °C, Full Load, 1500 µF, 200 V

-10

-5

0

5

10

15

20

0 500 1000 1500 2000 2500 3000 3500 4000

Test Hours

∆ C

ap (

%)

and

DF

(%

)

0

30

60

90

120

150

180

DC

L (

uA)

DF

DCL

∆C

-10

-5

0

5

10

15

20

25

30

35

0 2000 4000 6000 8000 10000

Test Hours

∆

DCL

DF

C

Type 381LQ Operating Life vs Ripple Current

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5


Exp

ecte

d O

pera

ting

Lif

e, k

h

45°C

55°C

65°C

75°C

85°C

95°C

105°C

Aluminum

Snap-InCapacitors


CORNELLDUBILIER



1000 381LQ102M200J452 0.199 0.090 2.30 3.22 25 x 451000 381LQ102M200K022 0.199 0.090 2.30 3.22 30 x 301000 381LQ102M200A012 0.216 0.097 2.30 3.22 35 x 251200 381LQ122M200J052 0.166 0.075 2.65 3.71 25 x 501200 381LQ122M200K032 0.166 0.075 2.65 3.71 30 x 351200 381LQ122M200A022 0.180 0.090 2.65 3.71 35 x 301500 381LQ152M200K042 0.133 0.060 2.80 3.92 30 x 401500 381LQ152M200A022 0.114 0.072 2.80 3.92 35 x 301800 381LQ182M200K452 0.110 0.050 3.08 4.31 30 x 451800 381LQ182M200A042 0.129 0.084 3.08 4.31 35 x 402200 381LQ222M200K052 0.090 0.041 3.48 4.87 30 x 502200 381LQ222M200A452 0.096 0.044 3.48 4.87 35 x 45

250 Vdc (300 Vdc Surge)270 381LQ271M250H012 0.614 0.276 1.10 1.54 22 x 25330 381LQ331M250H022 0.502 0.226 1.20 1.68 22 x 30330 381LQ331M250J012 0.502 0.226 1.20 1.68 25 x 25390 381LQ391M250H032 0.425 0.191 1.30 1.82 22 x 35390 381LQ391M250J012 0.425 0.191 1.30 1.82 25 x 25470 381LQ471M250H042 0.353 0.159 1.40 1.96 22 x 40470 381LQ471M250J022 0.353 0.159 1.40 1.96 25 x 30470 381LQ471M250K012 0.353 0.159 1.40 1.96 30 x 25560 381LQ561M250H452 0.296 0.133 1.50 2.10 22 x 45560 381LQ561M250J032 0.296 0.133 1.50 2.10 25 x 35560 381LQ561M250K012 0.296 0.133 1.50 2.10 30 x 25680 381LQ681M250H052 0.244 0.110 1.70 2.38 22 x 50680 381LQ681M250J042 0.244 0.110 1.70 2.38 25 x 40680 381LQ681M250K022 0.244 0.110 1.70 2.38 30 x 30680 381LQ681M250A012 0.244 0.110 1.70 2.38 35 x 25820 381LQ821M250J452 0.202 0.091 2.00 2.80 25 x 45820 381LQ821M250K032 0.202 0.091 2.00 2.80 30 x 35820 381LQ821M250A022 0.202 0.091 2.00 2.80 35 x 30

1000 381LQ102M250K042 0.166 0.075 2.20 3.08 30 x 401200 381LQ122M250K452 0.138 0.062 2.30 3.22 30 x 451500 381LQ152M250A452 0.110 0.050 2.50 3.50 35 x 451800 381LQ182M250A052 0.092 0.041 2.70 3.78 35 x 50

315 Vdc (365 Vdc Surge)150 381LQ151M315H012 1.105 0.497 0.82 1.15 22 x 25180 381LQ181M315H022 0.921 0.414 0.90 1.26 22 x 30220 381LQ221M315H022 0.754 0.339 1.00 1.40 22 x 30270 381LQ271M315J022 0.614 0.276 1.10 1.54 25 x 30330 381LQ331M315H452 0.502 0.226 1.20 1.68 22 x 45330 381LQ331M315J032 0.502 0.226 1.20 1.68 25 x 35330 381LQ331M315K012 0.502 0.226 1.20 1.68 30 x 25390 381LQ391M315J042 0.425 0.191 1.30 1.82 25 x 40390 381LQ391M315K022 0.425 0.191 1.30 1.82 30 x 30390 381LQ391M315A012 0.425 0.191 1.30 1.82 35 x 25470 381LQ471M315J452 0.353 0.159 1.40 1.96 25 x 45470 381LQ471M315K032 0.353 0.159 1.40 1.96 30 x 35560 381LQ561M315J052 0.296 0.133 1.50 2.10 25 x 50560 381LQ561M315K042 0.296 0.133 1.50 2.10 30 x 40560 381LQ561M315A022 0.296 0.133 1.50 2.10 35 x 30680 381LQ681M315K452 0.244 0.116 1.70 2.38 30 x 45680 381LQ681M315A032 0.244 0.116 1.70 2.38 35 x 35820 381LQ821M315K052 0.202 0.091 2.00 2.80 30 x 50820 381LQ821M315A042 0.202 0.091 2.00 2.80 35 x 40

1000 381LQ102M315A452 0.166 0.075 2.30 3.22 35 x 45350 Vdc (400 Vdc Surge)

120 381LQ121M350H012 1.382 0.622 0.75 1.05 22 x 25150 381LQ151M350H022 1.105 0.497 0.82 1.15 22 x 30180 381LQ181M350H022 0.921 0.414 0.90 1.26 22 x 30180 381LQ181M350J012 0.921 0.414 0.90 1.26 25 x 25220 381LQ221M350H032 0.754 0.339 1.00 1.40 22 x 35220 381LQ221M350J022 0.754 0.339 1.00 1.40 25 x 30270 381LQ271M350J032 0.614 0.276 1.10 1.54 25 x 35270 381LQ271M350K012 0.614 0.276 1.10 1.54 30 x 25330 381LQ331M350J042 0.502 0.226 1.20 1.68 25 x 40

330 381LQ331M350K022 0.502 0.226 1.20 1.68 30 x 30390 381LQ391M350J452 0.425 0.191 1.30 1.82 25 x 45390 381LQ391M350K032 0.425 0.191 1.30 1.82 30 x 35470 381LQ471M350J052 0.353 0.159 1.40 1.96 25 x 50470 381LQ471M350A022 0.353 0.159 1.40 1.96 35 x 30560 381LQ561M350K452 0.296 0.133 1.50 2.10 30 x 45560 381LQ561M350A032 0.296 0.133 1.50 2.10 35 x 35680 381LQ681M350K052 0.244 0.110 1.70 2.38 30 x 50680 381LQ681M350A042 0.244 0.110 1.70 2.38 35 x 40820 381LQ821M350A452 0.202 0.091 1.90 2.66 35 x 45

400 Vdc (450 Vdc Surge)100 381LQ101M400H012 1.824 0.821 0.70 0.98 22 x 25120 381LQ121M400H022 1.520 0.684 0.75 1.05 22 x 30150 381LQ151M400H022 1.216 0.547 0.88 1.23 22 x 30180 381LQ181M400H032 1.013 0.458 0.95 1.33 22 x 35180 381LQ181M400J022 1.013 0.458 0.95 1.33 25 x 30220 381LQ221M400H452 0.829 0.373 1.10 1.54 22 x 45220 381LQ221M400J032 0.829 0.373 1.10 1.54 25 x 35220 381LQ221M400K012 0.829 0.373 1.10 1.54 30 x 25270 381LQ271M400H052 0.675 0.304 1.22 1.71 22 x 50270 381LQ271M400J042 0.675 0.304 1.22 1.71 25 x 40270 381LQ271M400K022 0.675 0.304 1.22 1.71 30 x 30270 381LQ271M400A012 0.675 0.304 1.22 1.71 35 x 25330 381LQ331M400J452 0.553 0.249 1.44 2.02 25 x 45330 381LQ331M400K032 0.553 0.249 1.44 2.02 30 x 35330 381LQ331M400A022 0.553 0.249 1.44 2.02 35 x 30390 381LQ391M400J052 0.468 0.210 1.55 2.17 25 x 50390 381LQ391M400K042 0.468 0.210 1.55 2.17 30 x 40390 381LQ391M400A022 0.468 0.210 1.55 2.17 35 x 30470 381LQ471M400K452 0.388 0.175 1.68 2.35 30 x 45470 381LQ471M400A032 0.388 0.175 1.68 2.35 35 x 35560 381LQ561M400K052 0.326 0.147 1.90 2.66 30 x 50560 381LQ561M400A042 0.326 0.147 1.90 2.66 35 x 40680 381LQ681M400A452 0.268 0.121 2.12 2.97 35 x 45

450 Vdc (500 Vdc Surge)100 381LQ101M450H022 1.824 0.821 0.64 0.90 22 x 30100 381LQ101M450J012 1.824 0.821 0.64 0.90 25 x 25120 381LQ121M450H032 1.520 0.684 0.72 1.01 22 x 35120 381LQ121M450J022 1.520 0.684 0.72 1.01 25 x 30150 381LQ151M450H042 1.216 0.547 0.79 1.11 22 x 40150 381LQ151M450J022 1.216 0.547 0.79 1.11 25 x 30150 381LQ151M450K012 1.216 0.547 0.79 1.11 30 x 25180 381LQ181M450H452 1.013 0.456 0.87 1.22 22 x 45180 381LQ181M450J042 1.013 0.456 0.87 1.22 25 x 40180 381LQ181M450K022 1.013 0.456 0.87 1.22 30 x 30220 381LQ221M450J452 0.829 0.373 1.00 1.40 25 x 45220 381LQ221M450K022 0.829 0.373 1.00 1.40 30 x 30220 381LQ221M450A012 0.829 0.373 1.00 1.40 35 x 25270 381LQ271M450J052 0.675 0.304 1.19 1.67 25 x 50270 381LQ271M450K042 0.675 0.304 1.19 1.67 30 x 40270 381LQ271M450A022 0.675 0.304 1.19 1.67 35 x 30330 381LQ331M450K452 0.553 0.249 1.38 1.93 30 x 45330 381LQ331M450A032 0.553 0.249 1.38 1.93 35 x 35390 381LQ391M450A042 0.468 0.21 1.55 2.17 35 x 40470 381LQ471M450A452 0.388 0.175 1.74 2.44 35 x 45560 381LQ561M450A052 0.326 0.147 1.9 2.66 35 x 50390 381LQ391M450K052 0.680 0.210 1.55 2.17 30 x 50390 381LQ391M450A042 0.468 0.210 1.55 2.17 35 x 40470 381LQ471M450A452 0.388 0.175 1.74 2.44 35 x 45560 381LQ561M450A052 0.326 0.147 1.90 2.66 35 x 50








Types 381L, 383L, 381LX & 383LX, 105 C High-Ripple Snap-In

CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors

SpecificationsOperating Temperature: 40 °C to 105 °C up to 315 Vdc, 25 °C 350 Vdc and up

Rated Voltage: 10 Vdc to 450 VdcCapacitance: 33 µF to150,000 F 20%

Leakage Current: 3 CV ARipple Current Multipliers: Ambient Temperature

Frequency

50 Hz 60 Hz 120 Hz 500 Hz 1 kHz 10 kHz& up

10-100 Vdc .93 .95 1.00 1.05 1.08 1.15160-400 Vdc .95 .98 1.00 1.20 1.25 1.40

EIA Ripple Life: 12,000 h @ 85 °C, Full load as per EIA IS-749 Capacitance 20%,ESR 200% of limit,DCL 100% of limit

Shelf Life: 1000 h @ 105 °C, capacitance 20%, DF 200% of limit, DCL 100% of limit.Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane

45 °C 60 °C 70 °C 85 °C 105°C381L 2.7 2.6 2.5 2.1 1.0381LX, 383 LX 2.35 2.2 2.0 1.70 1.0

Adding longer-life and more ripple capability to the excel-lent value of Type 380L/LX capacitors, the 381L/LX readilyhandles tough switching power supply input and outputcircuits and motor-drive bus capacitor applications wherethe high surface area of multiple units in parallel equals theripple capability of our Type 520C inverter-grade capacitor.Type 381LX delivers more capacitance per can size whileType 381L gives lower ESR for the same capacitance rating.Type 383L gives the choice of 4 or 5 leads for stable,reverseproof mounting. Type 383LX has 5 leads available.

Types 381L/LX & 4-pin Mount 383LX (105 °C)

Highlights Latest available ratings, worldwide Top performance in power supplies and motor drives 4 times the life of Type 380L/LX Big selection of 46 case sizes 2, 4 and 5 leads available

F

Type 381ELp 2.091

MOREType 380LQp 2.070

Life

RippleType 381LR

p 2.087


CORNELLDUBILIER


Types 381L, 383L, 381LX & 383LX, 105 C High-Ripple Snap-In Alum

inumSnap-In

Capacitors

Outline Drawings

Four Pins383L/LX (35 and 40 mm diameter)

Five Pins383L (40 and 50 mm diameter)

Notes:* Use dummy terminals for mechanical support only. Make no electrical connection because they resistively connect through the

electrolyte to the negative terminal.

** Safety Vent may be on the bottom or on the side of the can.

** Safety Vent

D+1max.

PC Board Mounting Holes

V Terminal Standoff Pin Dimensions

** Safety Vent

Two Pins381L/LX (20 through 40 mm diameter)

Terminal Connection40 mm Dia. 50 mm Dia.

A dummy negative (–)B dummy dummyC positive (+) positive (+)D dummy positive (+)– negative (–) negative (–)





CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors

Insulated Case Dimensions





383LX 472 M 200 N08 2 V

Type Capacitance Tolerance Rated Case Code Insulation 383L/LX381L (2 pins) 681 = 680 µF M = 20% Voltage 2 = PVC 4 or 5 Pin Mount381LX (2 pins) 472 = 4700 µF Vdc blank = 4 pins 383L (4 or 5 pins) (35 or 40 mm dia)383LX (4 or 5 pins) V = 5 pins

(40 or 50 mm dia)


G01 20 0.79 25 0.98 14G02 20 0.79 30 1.18 17G03 20 0.79 35 1.38 19G04 20 0.79 40 1.57 21

H20 22 0.87 20 0.79 14H01 22 0.87 25 0.98 16H02 22 0.87 30 1.18 19H03 22 0.87 35 1.38 22H04 22 0.87 40 1.57 24H45 22 0.87 45 1.77 28H05 22 0.87 50 1.97 31

J20 25 0.98 20 0.79 16J01 25 0.98 25 0.98 20J02 25 0.98 30 1.18 24J03 25 0.98 35 1.38 27J45 25 0.98 40 1.57 31J04 25 0.98 45 1.77 35J05 25 0.98 50 1.97 38

K20 30 1.18 20 0.79 25K01 30 1.18 25 0.98 30K02 30 1.18 30 1.18 35K03 30 1.18 35 1.38 40K04 30 1.18 40 1.57 44K45 30 1.18 45 1.77 48K05 30 1.18 50 1.97 53


A20 35 1.38 20 0.79 35A01 35 1.38 25 0.98 42A02 35 1.38 30 1.18 48A03 35 1.38 35 1.38 54A04 35 1.38 40 1.57 62A45 35 1.38 45 1.77 67A05 35 1.38 50 1.97 74A06 35 1.38 63 2.48 88A07 35 1.38 70 2.76 98A08 35 1.38 80 3.15 112A10 35 1.38 105 4.13 144N04 40 1.57 40 1.57 82N05 40 1.57 50 1.97 105N06 40 1.57 63 2.48 130N08 40 1.57 80 3.15 185N10 40 1.57 105 4.13 265B05 50 1.97 50 1.97 136B06 50 1.97 63 2.48 168B08 50 1.97 80 3.15 239B09 50 1.97 92 3.62 241B10 50 1.97 105 4.13 325


CORNELLDUBILIER


Aluminum

Snap-InCapacitors




Ratings


4700 381L472M010H012 0.127 0.096 1.80 2.10 22x256800 381L682M010H022 0.087 0.066 2.10 2.40 22x306800 381L682M010J012 0.087 0.066 2.10 2.40 25x256800 381L682M010H012 0.098 0.074 2.10 2.40 22x256800 381LX682M010G012 0.107 0.081 1.30 1.50 20x258200 381L822M010J012 0.081 0.061 2.30 2.60 25x258200 381LX822M010G022 0.089 0.067 1.60 1.80 20x30

10000 381L103M010H042 0.060 0.045 2.50 2.90 22x4010000 381L103M010J022 0.060 0.045 2.50 2.90 25x3010000 381L103M010K012 0.060 0.045 2.50 2.90 30x2510000 381L103M010H022 0.066 0.050 2.50 2.90 22x3010000 381LX103M010G022 0.073 0.055 1.80 2.10 20x3010000 381LX103M010H012 0.073 0.055 1.80 2.10 22x2512000 381LX123M010G032 0.061 0.046 2.20 2.50 20x3512000 381LX123M010H022 0.061 0.046 2.20 2.50 22x3012000 381L123M010H032 0.073 0.042 2.80 3.20 22x3512000 381L123M010J022 0.073 0.042 2.80 3.20 25x3015000 381L153M010H052 0.040 0.026 3.10 3.60 22x5015000 381L153M010J042 0.040 0.026 3.10 3.60 25x4015000 381L153M010K022 0.040 0.026 3.10 3.60 30x3015000 381L153M010H042 0.044 0.033 3.10 3.60 22x4015000 381L153M010J032 0.044 0.033 3.10 3.60 25x3515000 381L153M010K012 0.044 0.033 3.10 3.60 30x2515000 381LX153M010G042 0.049 0.037 2.30 2.60 20x4015000 381LX153M010H032 0.049 0.037 2.30 2.60 22x3515000 381LX153M010J012 0.049 0.037 2.30 2.60 25x2518000 381L183M010H052 0.037 0.028 3.20 3.70 22x5018000 381L183M010J042 0.037 0.028 3.20 3.70 25x4018000 381L183M010K022 0.037 0.028 3.20 3.70 30x3018000 381L183M010A012 0.037 0.028 3.20 3.70 35x2518000 381LX183M010H042 0.041 0.031 2.40 2.80 22x4018000 381LX183M010J022 0.041 0.031 2.40 2.80 25x3022000 381L223M010J052 0.027 0.020 3.40 3.90 25x5022000 381L223M010K042 0.027 0.020 3.40 3.90 30x4022000 381L223M010A022 0.027 0.020 3.40 3.90 35x3022000 381L223M010K032 0.030 0.023 3.40 3.90 30x3522000 381LX223M010H452 0.033 0.025 2.60 3.00 22x4522000 381LX223M010J032 0.033 0.025 2.60 3.00 25x3522000 381LX223M010K012 0.033 0.025 2.60 3.00 30x2527000 381L273M010J052 0.025 0.019 3.70 4.30 25x5027000 381L273M010K042 0.025 0.019 3.70 4.30 30x4027000 381L273M010A032 0.025 0.019 3.70 4.30 35x3527000 381LX273M010H052 0.027 0.020 3.10 3.60 22x5027000 381LX273M010J042 0.027 0.020 3.10 3.60 25x4027000 381LX273M010K022 0.027 0.020 3.10 3.60 30x3027000 381LX273M010A012 0.027 0.020 3.10 3.60 35x2533000 381L333M010K052 0.018 0.014 3.90 4.50 30x5033000 381L333M010A042 0.018 0.014 3.90 4.50 35x4033000 381LX333M010J452 0.022 0.017 3.40 3.90 25x4533000 381LX333M010K032 0.022 0.017 3.40 3.90 30x3533000 381LX333M010A022 0.022 0.017 3.40 3.90 35x3039000 381L393M010K052 0.017 0.013 4.50 5.20 30x5039000 381L393M010A042 0.017 0.013 4.50 5.20 35x4039000 381LX393M010J052 0.021 0.016 3.70 4.30 25x5039000 381LX393M010K042 0.021 0.016 3.70 4.30 30x4039000 381LX393M010A022 0.021 0.016 3.70 4.30 35x3047000 381LX473M010K452 0.019 0.014 4.20 4.80 30x4547000 381LX473M010A032 0.019 0.014 4.20 4.80 35x3556000 381LX563M010K052 0.018 0.014 5.00 5.80 30x5056000 381LX563M010A042 0.018 0.014 5.00 5.80 35x4068000 381LX683M010A052 0.018 0.014 5.50 6.30 35x5082000 381L823M010A062 0.013 0.008 6.30 7.90 35x6382000 383L823M010N052 0.014 0.009 5.90 7.30 40x50

100000 381L104M010A072 0.011 0.007 7.30 9.00 35x70


120000 381L124M010A082 0.010 0.006 8.20 10.00 35x80120000 383L124M010N062 0.012 0.008 7.10 8.60 40x63150000 383L154M010N082 0.009 0.006 8.90 10.60 40x80


3300 381L332M016H012 0.141 0.107 1.60 1.80 22x253300 381LX332M016H202 0.181 0.137 1.30 1.50 22x204700 381L472M016H022 0.099 0.075 2.00 2.30 22x304700 381L472M016J012 0.099 0.075 2.00 2.30 25x254700 381L472M016H012 0.113 0.085 2.10 2.40 22x254700 381LX472M016J202 0.127 0.096 1.60 1.80 25x206800 381L682M016H042 0.068 0.051 2.40 2.80 22x406800 381L682M016J022 0.068 0.057 2.40 2.80 25x306800 381L682M016K012 0.068 0.057 2.40 2.80 30x256800 381L682M016H022 0.078 0.059 2.40 2.80 22x306800 381L682M016J012 0.078 0.059 2.40 2.80 25x256800 381LX682M016G022 0.088 0.067 2.20 2.50 20x306800 381LX682M016H012 0.088 0.067 2.20 2.50 22x256800 381LX682M016K202 0.088 0.067 1.80 2.10 30x208200 381L822M016H032 0.065 0.049 2.60 3.00 22x358200 381LX822M016G032 0.073 0.055 2.40 2.80 20x358200 381LX822M016H022 0.079 0.055 2.40 2.80 22x30

10000 381L103M016H052 0.046 0.035 2.90 3.30 22x5010000 381L103M016J042 0.046 0.035 2.90 3.30 25x4010000 381L103M016K022 0.046 0.035 2.90 3.30 30x3010000 381L103M016H042 0.053 0.040 2.90 3.30 22x4010000 381L103M016J022 0.053 0.040 2.90 3.30 25x3010000 381L103M016K012 0.053 0.040 2.90 3.30 30x2510000 381LX103M016G042 0.060 0.045 2.60 3.00 20x4010000 381LX103M016H022 0.060 0.045 2.60 3.00 22x3010000 381LX103M016J012 0.060 0.045 2.60 3.00 25x2510000 381LX103M016A202 0.060 0.045 2.40 2.80 35x2012000 381L123M016J032 0.044 0.033 3.20 3.70 25x3512000 381L123M016K022 0.044 0.033 3.20 3.70 30x3012000 381L123M016A012 0.044 0.033 3.20 3.70 35x2512000 381LX123M016H032 0.050 0.038 2.90 3.30 22x3512000 381LX123M016J022 0.050 0.038 2.90 3.30 25x3012000 381LX123M016K012 0.050 0.038 2.90 3.30 30x2515000 381L153M016J052 0.031 0.023 3.50 4.00 25x5015000 381L153M016K042 0.031 0.023 3.50 4.00 30x4015000 381L153M016A022 0.031 0.023 3.50 4.00 35x3015000 381L153M016H052 0.035 0.026 3.50 4.00 22x5015000 381L153M016J042 0.035 0.026 3.50 4.00 25x4015000 381LX153M016H042 0.040 0.030 3.20 3.70 22x4015000 381LX153M016J032 0.040 0.030 3.20 3.70 25x3515000 381LX153M016K022 0.040 0.030 3.20 3.70 30x3018000 381L183M016J052 0.029 0.022 3.80 4.40 25x5018000 381L183M016K032 0.029 0.022 3.80 4.40 30x3518000 381L183M016A022 0.029 0.022 3.80 4.40 35x3018000 381LX183M016H452 0.033 0.025 3.50 4.00 22x4518000 381LX183M016J042 0.033 0.025 3.50 4.00 25x4018000 381LX183M016K022 0.033 0.025 3.50 4.00 30x3018000 381LX183M016A012 0.033 0.025 3.50 4.00 35x2522000 381L223M016K052 0.021 0.016 4.20 4.80 30x5022000 381L223M016A042 0.021 0.016 4.20 4.80 35x4022000 381L223M016K042 0.024 0.018 4.20 4.80 30x4022000 381L223M016A032 0.024 0.018 4.20 4.80 35x3522000 381LX223M016J452 0.027 0.020 3.80 4.40 25x4522000 381LX223M016K032 0.027 0.020 3.80 4.40 30x3522000 381LX223M016A022 0.027 0.020 3.80 4.40 35x3027000 381L273M016K052 0.020 0.015 5.60 6.40 30x5027000 381L273M016A042 0.020 0.015 5.60 6.40 35x4027000 381LX273M016J052 0.022 0.017 4.20 4.80 25x5027000 381LX273M016K042 0.022 0.017 4.20 4.80 30x40




CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors





27000 381LX273M016A022 0.022 0.017 4.20 4.80 35x3033000 381LX333M016K452 0.018 0.014 4.70 5.40 30x4533000 381LX333M016A032 0.018 0.014 4.70 5.40 35x3539000 381LX393M016K052 0.017 0.013 5.10 5.90 30x5039000 381LX393M016A042 0.017 0.013 5.10 5.90 35x4047000 381LX473M016A452 0.017 0.013 5.50 6.30 35x4547000 383LX473M016N042 0.020 0.018 5.50 6.33 40x4056000 381LX563M016A052 0.016 0.012 6.00 6.90 35x5068000 381L683M016A072 0.012 0.007 7.10 9.00 35x7068000 383L683M016N062 0.012 0.008 6.90 8.50 40x6368000 381LX683M016A062 0.017 0.013 6.80 7.80 35x6368000 383LX683M016N052 0.019 0.014 6.60 7.60 40x5082000 381L823M016A082 0.010 0.007 8.00 10.00 35x8082000 383LX823M016N062 0.017 0.013 7.30 8.40 40x63

100000 381LX104M016A082 0.015 0.011 7.50 8.70 35x80120000 383L124M016N082 0.009 0.006 8.70 10.50 40x80120000 381LX124M016A102 0.014 0.012 8.71 10.02 35x105120000 383LX124M016B052V 0.015 0.014 9.02 10.37 50x50150000 383LX154M016N102 0.013 0.012 9.88 11.36 40x105150000 383LX154M016B062V 0.014 0.013 10.15 11.67 50x63180000 383LX184M016B082V 0.013 0.012 11.02 12.67 50x80220000 383LX224M016B092V 0.012 0.011 11.71 13.47 50x92250000 383LX254M016B102V 0.011 0.010 12.31 14.16 50x105


2200 381LX222M025H202 0.211 0.160 1.30 1.50 22x202200 381L222M025H012 0.211 0.160 1.50 1.70 22x253300 381L332M025H012 0.121 0.092 1.70 2.00 22x253300 381L332M025H022 0.141 0.107 1.70 2.00 22x303300 381LX332M025J202 0.141 0.107 1.60 1.80 25x203300 381L332M025J012 0.141 0.107 1.70 2.00 25x254700 381L472M025H022 0.085 0.064 2.20 2.50 22x304700 381L472M025J012 0.085 0.064 2.20 2.50 25x254700 381LX472M025G022 0.099 0.075 2.00 2.30 20x304700 381LX472M025H012 0.099 0.075 2.00 2.30 22x254700 381L472M025H042 0.099 0.075 2.20 2.50 22x404700 381L472M025J022 0.099 0.075 2.20 2.50 25x304700 381LX472M025K202 0.099 0.075 1.80 2.10 30x204700 381L472M025K012 0.099 0.075 2.20 2.50 30x255600 381L562M025H032 0.071 0.054 2.40 2.80 22x355600 381LX562M025G032 0.083 0.036 2.20 2.50 20x355600 381LX562M025H022 0.083 0.063 2.20 2.50 22x306800 381L682M025H042 0.059 0.045 2.60 3.00 22x406800 381L682M025J022 0.059 0.045 2.60 3.00 25x306800 381L682M025K012 0.059 0.045 2.60 3.00 30x256800 381LX682M025G042 0.068 0.051 2.40 2.80 20x406800 381LX682M025H022 0.068 0.051 2.40 2.80 22x306800 381L682M025H052 0.068 0.051 2.60 3.00 22x506800 381LX682M025J012 0.068 0.051 2.40 2.80 25x256800 381L682M025J042 0.068 0.051 2.60 3.00 25x406800 381L682M025K022 0.068 0.051 2.60 3.00 30x306800 381LX682M025A202 0.068 0.051 2.30 2.60 35x208200 381L822M025J032 0.049 0.037 2.80 3.20 25x358200 381LX822M025H032 0.057 0.043 2.70 3.10 22x358200 381LX822M025J022 0.057 0.043 2.70 3.10 25x308200 381LX822M025K012 0.057 0.043 2.70 3.10 30x25

10000 381L103M025H052 0.040 0.030 3.10 3.60 22x5010000 381L103M025J042 0.040 0.030 3.10 3.60 25x4010000 381L103M025A012 0.040 0.030 3.10 3.60 35x2510000 381LX103M025H042 0.046 0.035 3.00 3.50 22x4010000 381LX103M025J032 0.046 0.035 3.00 3.50 25x3510000 381L103M025J052 0.046 0.035 3.10 3.60 25x5010000 381L103M025K042 0.046 0.035 3.10 3.60 30x4010000 381L103M025A022 0.046 0.035 3.10 3.60 35x3010000 381LX103M025K022 0.047 0.035 3.00 3.50 30x3012000 381L123M025J052 0.033 0.025 3.20 3.70 25x50


12000 381L123M025K032 0.033 0.025 3.20 3.70 30x3512000 381L123M025A022 0.033 0.025 3.20 3.70 35x3012000 381LX123M025J042 0.039 0.029 3.20 3.70 25x4012000 381LX123M025K022 0.039 0.029 3.20 3.70 30x3012000 381LX123M025A012 0.039 0.029 3.20 3.70 35x2512000 381LX123M025H452 0.044 0.033 3.20 3.68 22x4515000 381L153M025K042 0.027 0.015 3.50 4.00 30x4015000 381L153M025A032 0.027 0.015 3.50 4.00 35x3515000 381LX153M025J452 0.031 0.023 3.60 4.10 25x4515000 381LX153M025K032 0.031 0.032 3.60 4.10 30x3515000 381L153M025K052 0.031 0.023 3.50 4.00 30x5015000 381LX153M025A022 0.031 0.023 3.60 4.10 35x3015000 381L153M025A042 0.031 0.023 3.50 4.00 35x4018000 381L183M025K052 0.022 0.017 3.80 4.40 30x5018000 381L183M025A042 0.022 0.017 3.80 4.40 35x4018000 381LX183M025J052 0.026 0.020 3.90 4.50 25x5018000 381LX183M025K042 0.026 0.020 3.90 4.50 30x4018000 381LX183M025A032 0.026 0.020 3.90 4.50 35x3522000 381LX223M025K452 0.021 0.016 4.30 4.90 30x4522000 381LX223M025A032 0.021 0.016 4.30 4.90 35x3527000 381LX273M025A452 0.017 0.009 4.80 5.50 35x4527000 381LX273M025A042 0.018 0.017 4.80 5.52 35x4027000 383L273M025N042 0.020 0.013 4.60 5.60 40x4033000 381LX333M025A052 0.014 0.007 5.50 6.30 35x5033000 383LX333M025N042 0.018 0.016 5.50 6.33 40x4039000 381L393M025A062 0.014 0.009 6.10 7.60 35x6339000 383L393M025N052 0.015 0.010 5.80 7.00 40x5047000 381L473M025A072 0.012 0.008 7.10 8.70 35x7047000 383L473M025N062 0.012 0.008 6.90 8.30 40x6347000 381LX473M025A062 0.017 0.013 7.00 8.10 35x6347000 383LX473M025N052 0.019 0.015 6.20 7.00 40x5056000 381L563M025A082 0.010 0.007 7.90 9.70 35x8056000 383LX563M025N062 0.015 0.012 6.70 7.70 40x6368000 383L683M025N082 0.009 0.007 8.70 10.20 40x8082000 381LX823M025A102 0.013 0.012 8.58 9.87 35x10582000 383LX823M025N082 0.014 0.011 8.00 9.20 40x8082000 383LX823M025B052V 0.016 0.015 9.20 10.58 50x50

100000 383LX104M025N102 0.012 0.010 9.76 11.22 40x105100000 383LX104M025B062V 0.015 0.013 10.02 11.52 50x63120000 383LX124M025B082V 0.013 0.012 10.93 12.57 50x80150000 383LX154M025B092V 0.012 0.011 11.70 13.46 50x92180000 383LX184M025B102V 0.010 0.009 12.42 14.28 50x105


1500 381LX152M035H202 0.265 0.200 1.10 1.30 22x201500 381L152M035H012 0.265 0.200 1.40 1.60 22x252200 381L222M035H012 0.151 0.114 1.60 1.80 22x252200 381L222M035H022 0.181 0.137 1.60 1.80 22x302200 381LX222M035J202 0.181 0.137 1.40 1.60 25x202200 381L222M035J012 0.181 0.137 1.60 1.80 25x253300 381L332M035H022 0.100 0.076 1.80 2.10 22x303300 381L332M035J012 0.100 0.076 1.80 2.10 25x253300 381LX332M035G022 0.121 0.091 1.90 2.20 20x303300 381LX332M035H012 0.121 0.091 1.90 2.20 22x253300 381L332M035H042 0.121 0.091 1.80 2.10 22x403300 381L332M035J022 0.121 0.091 1.80 2.10 25x303300 381LX332M035K202 0.121 0.091 1.70 2.00 30x203300 381L332M035K012 0.121 0.091 1.80 2.10 30x253900 381L392M035H032 0.085 0.060 2.00 2.30 22x353900 381LX392M035G032 0.102 0.077 2.00 2.30 20x353900 381LX392M035H022 0.102 0.077 2.00 2.30 22x304700 381L472M035H042 0.071 0.054 2.30 2.60 22x404700 381L472M035J022 0.071 0.054 2.30 2.60 25x304700 381L472M035K012 0.071 0.054 2.30 2.60 30x254700 381LX472M035H032 0.080 0.060 2.20 2.50 22x354700 381L472M035H052 0.085 0.060 2.30 2.60 22x50


CORNELLDUBILIER


Aluminum

Snap-InCapacitors





4700 381LX472M035J012 0.085 0.060 2.20 2.50 25x254700 381L472M035J042 0.085 0.060 2.30 2.60 25x404700 381L472M035K022 0.085 0.060 2.30 2.60 30x304700 381LX472M035A202 0.085 0.060 2.00 2.30 35x204700 381LX472M035G042 0.088 0.066 2.20 2.53 20x405600 381L562M035J032 0.059 0.045 2.50 2.90 25x355600 381LX562M035H032 0.071 0.054 2.40 2.80 22x355600 381LX562M035J022 0.071 0.054 2.40 2.80 25x305600 381LX562M035K012 0.071 0.054 2.40 2.80 30x256800 381L682M035H052 0.049 0.037 2.90 3.30 22x506800 381L682M035J042 0.049 0.037 2.90 3.30 25x406800 381L682M035A012 0.049 0.037 2.90 3.30 35x256800 381LX682M035H042 0.059 0.045 2.60 3.00 22x406800 381L682M035A022 0.059 0.045 2.90 3.30 35x306800 381LX682M035J032 0.059 0.045 2.60 3.00 25x356800 381L682M035J052 0.059 0.045 2.90 3.30 25x506800 381LX682M035K022 0.059 0.045 2.60 3.00 30x306800 381L682M035K042 0.059 0.045 2.90 3.30 30x408200 381L822M035J052 0.040 0.030 3.20 3.70 25x508200 381L822M035K032 0.040 0.030 3.20 3.70 30x358200 381LX822M035H052 0.049 0.037 2.90 3.30 22x508200 381LX822M035J042 0.049 0.037 2.90 3.30 25x408200 381LX822M035K022 0.049 0.037 2.90 3.30 30x308200 381LX822M035A012 0.049 0.037 2.90 3.30 35x25

10000 381L103M035K042 0.033 0.025 3.50 4.00 30x4010000 381LX103M035J452 0.040 0.030 3.20 3.70 25x4510000 381LX103M035K032 0.040 0.030 3.20 3.70 30x3510000 381L103M035K052 0.040 0.030 3.50 4.00 30x5010000 381LX103M035A022 0.040 0.030 3.20 3.70 35x3010000 381L103M035A042 0.040 0.030 3.50 4.00 35x4012000 381L123M035K052 0.028 0.021 3.80 4.40 30x5012000 381L123M035A032 0.028 0.021 3.80 4.40 35x3512000 381LX123M035J052 0.033 0.025 3.50 4.00 25x5012000 381LX123M035K042 0.033 0.025 3.50 4.00 30x4012000 381LX123M035A022 0.033 0.025 3.50 4.00 35x3015000 381L153M035A042 0.022 0.017 4.20 4.80 35x4015000 381LX153M035K452 0.027 0.020 3.90 4.50 30x4515000 381LX153M035A032 0.027 0.020 3.90 4.50 35x3518000 381LX183M035A042 0.022 0.017 4.30 4.90 35x4022000 381LX223M035A052 0.018 0.014 5.00 5.80 35x5022000 383LX223M035N042 0.023 0.017 5.00 5.75 40x4027000 383L273M035N052 0.018 0.011 5.30 6.60 40x5027000 381LX273M035A062 0.021 0.016 5.60 6.40 35x6333000 381L333M035A072 0.014 0.009 6.40 8.10 35x7033000 383L333M035N062 0.015 0.010 6.30 7.80 40x6339000 381L393M035A082 0.011 0.008 7.50 9.00 35x8047000 383L473M035N082 0.011 0.008 8.00 9.70 40x8047000 381LX473M035A102 0.017 0.013 8.07 9.28 35x10547000 383LX473M035B052V 0.021 0.016 8.25 9.49 50x5056000 383LX563M035B062V 0.019 0.014 9.07 10.43 50x6368000 383LX683M035N102 0.016 0.012 9.27 10.66 40x10568000 383LX683M035B082V 0.017 0.013 10.07 11.58 50x8082000 383LX823M035B092V 0.015 0.011 10.89 12.52 50x92

100000 383LX104M035B102V 0.018 0.010 11.75 13.51 50x105


1000 381LX102M050H202 0.332 0.251 0.90 1.00 22x201000 381L102M050H012 0.332 0.251 1.30 1.50 22x251200 380L122M050H012 0.221 0.167 1.40 1.60 22x251500 381L152M050H022 0.221 0.167 1.50 1.70 22x301500 381LX152M050J202 0.221 0.167 1.20 1.40 25x201500 381L152M050J012 0.221 0.167 1.50 1.70 25x251800 381L182M050H022 0.147 0.111 1.70 2.00 22x301800 381L182M050J012 0.147 0.111 1.70 2.00 25x251800 381LX182M050G022 0.184 0.139 1.50 1.70 20x301800 381LX182M050H012 0.184 0.139 1.50 1.70 22x25


2200 381L222M050H032 0.121 0.091 1.90 2.20 22x352200 381LX222M050G032 0.151 0.114 1.70 2.00 20x352200 381LX222M050H022 0.151 0.114 1.70 2.00 22x302200 381L222M050H042 0.151 0.114 1.90 2.20 22x402200 381L222M050J022 0.151 0.114 1.90 2.20 25x302200 381LX222M050K202 0.151 0.114 1.40 1.60 30x202200 381L222M050K012 0.151 0.114 1.90 2.20 30x252700 381L272M050H042 0.098 0.074 2.10 2.40 22x402700 381L272M050J022 0.098 0.074 2.10 2.40 25x302700 381L272M050K012 0.098 0.074 2.10 2.40 30x252700 381LX272M050G042 0.123 0.093 1.80 2.10 20x402700 381LX272M050H022 0.123 0.093 1.80 2.10 22x302700 381LX272M050J012 0.123 0.093 1.80 2.10 25x253300 381L332M050J032 0.080 0.061 2.30 2.60 25x353300 381LX332M050H032 0.100 0.076 2.00 2.30 22x353300 381L332M050H052 0.100 0.076 2.30 2.60 22x503300 381LX332M050J022 0.100 0.076 2.00 2.30 25x303300 381L332M050J042 0.100 0.076 2.30 2.60 25x403300 381L332M050K022 0.100 0.076 2.30 2.60 30x303300 381LX332M050A202 0.100 0.076 1.70 2.00 35x203900 381L392M050H052 0.068 0.051 2.50 2.90 22x503900 381L392M050J042 0.068 0.051 2.50 2.90 25x403900 381L392M050K022 0.068 0.051 2.50 2.90 30x303900 381L392M050A012 0.068 0.051 2.50 2.90 35x253900 381LX392M050H042 0.085 0.064 2.20 2.50 22x403900 381LX392M050J032 0.085 0.064 2.20 2.50 25x353900 381LX392M050K012 0.085 0.064 2.20 2.50 30x254700 381L472M050K032 0.056 0.042 2.80 3.20 30x354700 381LX472M050H452 0.071 0.054 2.50 2.90 22x454700 381LX472M050J042 0.071 0.054 2.50 2.90 25x404700 381L472M050J052 0.071 0.054 2.80 3.20 25x504700 381LX472M050K022 0.071 0.054 2.50 2.90 30x304700 381L472M050K042 0.071 0.054 2.80 3.20 30x404700 381LX472M050A012 0.071 0.054 2.50 2.90 35x254700 381L472M050A022 0.071 0.054 2.80 3.20 35x305600 381L562M050J052 0.047 0.036 3.00 3.50 25x505600 381L562M050K042 0.047 0.036 3.00 3.50 30x405600 381LX562M050H052 0.059 0.045 2.80 3.20 22x505600 381LX562M050J042 0.059 0.045 2.80 3.20 25x405600 381LX562M050K032 0.059 0.045 2.80 3.20 30x355600 381LX562M050A022 0.059 0.045 2.80 3.20 35x306800 381L682M050A032 0.039 0.029 3.20 3.70 35x356800 381LX682M050J052 0.049 0.029 3.30 3.80 25x506800 381LX682M050K042 0.049 0.029 3.30 3.80 30x406800 381L682M050K052 0.049 0.037 3.20 3.70 30x506800 381LX682M050A022 0.049 0.029 3.30 3.80 35x306800 381L682M050A042 0.049 0.037 3.20 3.70 35x408200 381L822M050K052 0.032 0.024 3.50 4.00 30x508200 381L822M050A042 0.032 0.024 3.50 4.00 35x408200 381LX822M050K452 0.040 0.030 3.60 4.10 30x458200 381LX822M050A032 0.040 0.030 3.60 4.10 35x35

10000 381LX103M050K052 0.033 0.025 4.00 4.60 30x5010000 381LX103M050A042 0.033 0.025 4.00 4.60 35x4012000 381LX123M050A452 0.028 0.021 4.50 5.20 35x4512000 383L123M050N042 0.029 0.018 3.80 4.80 40x4015000 381L153M050A062 0.020 0.012 5.10 6.50 35x6315000 383L153M050N052 0.021 0.013 4.90 6.10 40x5015000 381LX153M050A052 0.022 0.012 4.80 5.50 35x5015000 383LX153M050N042 0.022 0.018 4.80 5.52 40x4018000 381L183M050A072 0.017 0.010 5.90 7.50 35x7018000 383L183M050N062 0.017 0.011 5.80 7.20 40x6318000 381LX183M050A062 0.028 0.022 5.30 6.00 35x6322000 381L223M050A082 0.014 0.009 6.70 8.40 35x8022000 383LX223M050N052 0.026 0.019 5.10 5.90 40x5027000 383L273M050N082 0.013 0.009 7.40 9.00 40x8027000 381LX273M050A082 0.018 0.014 5.90 6.70 35x80




CORNELLDUBILIER





Alum

inum

Snap

-InCa

paci

tors


27000 383LX273M050N062 0.021 0.016 5.60 6.50 40x6333000 381LX333M050A102 0.018 0.010 7.23 8.31 35x10533000 383LX333M050B052V 0.018 0.014 7.75 8.91 50x5039000 383LX393M050N082 0.013 0.010 6.20 7.10 40x8039000 383LX393M050B062V 0.016 0.013 8.40 9.66 50x6347000 383LX473M050N102 0.012 0.010 8.18 9.41 40x10547000 383LX473M050B082V 0.014 0.011 9.19 10.57 50x8056000 383LX563M050B092V 0.012 0.009 9.79 11.26 50x9268000 383LX683M050B102V 0.011 0.009 10.42 11.98 50x105


680 381LX681M063H202 0.390 0.295 0.90 1.00 22x20680 381L681M063H012 0.390 0.295 0.90 1.00 22x25

1000 381L102M063H012 0.212 0.160 1.30 1.50 22x251000 381L102M063H022 0.265 0.200 1.30 1.50 22x301000 381LX102M063J202 0.265 0.200 1.20 1.40 25x201000 381L102M063J012 0.265 0.200 1.30 1.50 25x251200 381LX122M063G022 0.220 0.167 1.40 1.60 20x301200 381LX122M063H012 0.221 0.167 1.40 1.60 22x251500 381L152M063J012 0.141 0.107 1.60 1.80 25x251500 381LX152M063G032 0.177 0.134 1.50 1.70 20x351500 381LX152M063H022 0.177 0.134 1.50 1.70 22x301500 381L152M063H042 0.177 0.134 1.60 1.80 22x401500 381L152M063J022 0.177 0.134 1.60 1.80 25x301500 381LX152M063K202 0.177 0.134 1.30 1.50 30x201500 381L152M063K012 0.177 0.134 1.60 1.80 30x251800 381L182M063H032 0.118 0.089 1.80 2.10 22x351800 381LX182M063G042 0.147 0.111 1.70 2.00 20x401800 381LX182M063J012 0.147 0.111 1.70 2.00 25x251800 381LX182M063H022 0.157 0.117 1.70 1.96 22x302200 381L222M063H042 0.096 0.073 2.00 2.30 22x402200 381L222M063K012 0.096 0.073 2.00 2.30 30x252200 381LX222M063H032 0.121 0.091 2.00 2.30 22x352200 381L222M063H052 0.121 0.091 2.00 2.30 22x502200 381LX222M063J022 0.121 0.091 2.00 2.30 25x302200 381L222M063J042 0.121 0.091 2.00 2.30 25x402200 381L222M063K022 0.121 0.091 2.00 2.30 30x302200 381LX222M063A202 0.121 0.091 1.50 1.70 35x202700 381LX272M063H042 0.098 0.074 2.20 2.50 22x402700 381LX272M063J032 0.098 0.074 2.20 2.50 25x352700 381LX272M063K012 0.098 0.074 2.20 2.50 30x253300 381LX332M063H052 0.080 0.061 2.50 2.90 22x503300 381LX332M063J042 0.080 0.061 2.50 2.90 25x403300 381L332M063J052 0.080 0.061 2.50 2.90 25x503300 381LX332M063K022 0.080 0.061 2.50 2.90 30x303300 381L332M063K042 0.080 0.061 2.50 2.90 30x403300 381LX332M063A012 0.080 0.061 2.50 2.90 35x253300 380L332M063A022 0.080 0.061 2.50 2.90 35x303900 381LX392M063J452 0.068 0.051 2.70 3.10 25x453900 381LX392M063K032 0.068 0.051 2.70 3.10 30x353900 381LX392M063A022 0.068 0.051 2.70 3.10 35x304700 381LX472M063J052 0.056 0.042 3.00 3.50 25x504700 381LX472M063K042 0.056 0.042 3.00 3.50 30x404700 381L472M063K052 0.056 0.042 2.90 3.30 30x504700 381LX472M063A022 0.056 0.042 3.00 3.50 35x304700 381L472M063A042 0.056 0.042 2.90 3.30 35x405600 381LX562M063K452 0.047 0.036 3.30 3.80 30x455600 381LX562M063A032 0.047 0.036 3.30 3.80 35x356800 381LX682M063K052 0.039 0.029 3.60 4.10 30x506800 381LX682M063A042 0.039 0.029 3.60 4.10 35x408200 383L822M063N042 0.031 0.018 3.70 4.80 40x408200 381LX822M063A452 0.032 0.024 3.90 4.50 35x45

10000 381LX103M063A052 0.027 0.020 4.40 5.10 35x5012000 383L123M063N052 0.022 0.013 4.70 6.10 40x5012000 381L123M063A062 0.029 0.012 4.20 6.50 35x6312000 383LX123M063N042 0.030 0.028 4.52 5.20 40x40


12000 381LX123M063A052 0.035 0.027 4.40 5.10 35x5015000 383L153M063N062 0.018 0.011 5.70 7.20 40x6315000 381L153M063A072 0.026 0.010 4.70 7.50 35x7015000 381LX153M063A062 0.028 0.010 4.80 5.50 35x6315000 383LX153M063N052 0.033 0.025 4.60 5.30 40x5018000 381L183M063A082 0.025 0.009 5.10 8.40 35x8018000 383LX153M063N062 0.028 0.020 5.00 5.90 40x6322000 383L223M063N082 0.013 0.009 7.20 9.00 40x8022000 383LX223M063B052V 0.019 0.016 6.76 7.77 50x5027000 381LX273M063A102 0.017 0.014 6.53 7.51 35x10527000 383LX273M063B062V 0.017 0.014 7.34 8.44 50x6327000 383LX273M063N082 0.018 0.014 6.10 7.00 40x8033000 383LX333M063B082V 0.015 0.013 8.00 9.20 50x8039000 383LX393M063N102 0.014 0.012 7.53 8.66 40x10539000 383LX393M063B092V 0.014 0.012 8.48 9.75 50x9247000 383LX473M063B102V 0.012 0.010 8.99 10.34 50x105


470 381LX471M080H202 0.480 0.363 0.80 0.90 22x20470 381L471M080H012 0.480 0.363 0.80 0.90 22x25680 381L681M080H022 0.332 0.251 1.20 1.40 22x30680 381LX681M080J202 0.332 0.251 1.00 1.20 25x20680 381L681M080J012 0.332 0.251 1.20 1.40 25x25820 381LX821M080G022 0.275 0.208 1.20 1.40 20x30820 381LX821M080H012 0.275 0.208 1.20 1.40 22x25

1000 381LX102M080G032 0.225 0.170 1.30 1.50 20x351000 381LX102M080H022 0.225 0.170 1.30 1.50 22x301000 381L102M080H042 0.225 0.170 1.50 1.70 22x401000 381LX102M080J012 0.225 0.170 1.30 1.50 25x251000 381L102M080J022 0.225 0.170 1.50 1.70 25x301000 381LX102M080K202 0.225 0.170 1.20 1.40 30x201000 381L102M080K012 0.225 0.170 1.50 1.70 30x251200 381L122M080H032 0.166 0.126 1.60 1.80 22x351200 381L122M080J022 0.166 0.126 1.60 1.80 25x301200 381LX122M080G042 0.188 0.142 1.50 1.70 20x401200 381LX122M080H022 0.188 0.142 1.50 1.70 22x301200 381LX122M080J012 0.188 0.142 1.50 1.70 25x251500 381L152M080H042 0.133 0.101 1.80 2.10 22x401500 381L152M080J032 0.133 0.101 1.80 2.10 25x351500 381L152M080K012 0.133 0.101 1.80 2.10 30x251500 381LX152M080H032 0.150 0.113 1.70 2.00 22x351500 381L152M080H052 0.150 0.113 1.80 2.10 22x501500 381LX152M080J022 0.150 0.113 1.70 2.00 25x301500 381L152M080J042 0.150 0.113 1.80 2.10 25x401500 381L152M080K022 0.150 0.113 1.80 2.10 30x301500 381LX152M080A202 0.150 0.113 1.40 1.60 35x201800 381L182M080H052 0.111 0.084 2.00 2.30 22x501800 381L182M080J042 0.111 0.084 2.00 2.30 25x401800 381L182M080K022 0.111 0.084 2.00 2.30 30x301800 381L182M080A012 0.111 0.084 2.00 2.30 35x251800 381LX182M080H042 0.125 0.095 1.80 2.10 22x401800 381LX182M080J032 0.125 0.095 1.80 2.10 25x351800 381LX182M080K012 0.125 0.095 1.80 2.10 30x252200 381L222M080K032 0.090 0.068 2.30 2.60 30x352200 381LX222M080H452 0.102 0.077 2.10 2.40 22x452200 381LX222M080J032 0.102 0.077 2.10 2.40 25x352200 381L222M080J052 0.102 0.077 2.30 2.60 25x502200 381LX222M080K022 0.102 0.077 2.10 2.40 30x302200 381L222M080K042 0.102 0.077 2.30 2.60 30x402200 381LX222M080A012 0.102 0.077 2.10 2.40 35x252200 381L222M080A022 0.102 0.077 2.30 2.60 35x302700 381L272M080J052 0.074 0.056 2.50 2.90 25x502700 381L272M080K042 0.074 0.056 2.50 2.90 30x402700 381LX272M080J452 0.084 0.064 2.40 2.80 25x452700 381LX272M080K032 0.084 0.064 2.40 2.80 30x352700 381LX272M080A022 0.084 0.064 2.40 2.80 35x30


CORNELLDUBILIER


Aluminum

Snap-InCapacitors





3300 381L332M080A032 0.060 0.045 2.80 3.20 35x353300 381LX332M080J052 0.068 0.045 2.60 3.00 25x503300 381LX332M080K042 0.068 0.045 2.60 3.00 30x403300 381L332M080K052 0.068 0.051 2.80 3.20 30x503300 381LX332M080A022 0.068 0.045 2.60 3.00 35x303300 381L332M080A042 0.068 0.045 2.80 3.20 35x403900 381L392M080K052 0.051 0.039 3.00 3.50 30x503900 381L392M080A042 0.051 0.039 3.00 3.50 35x403900 381LX392M080K452 0.058 0.044 3.00 3.50 30x453900 381LX392M080A032 0.058 0.044 3.00 3.50 35x354700 381LX472M080K052 0.048 0.036 3.30 3.80 30x504700 381LX472M080A042 0.048 0.036 3.30 3.80 35x405600 383L562M080N042 0.035 0.022 3.50 4.40 40x405600 381LX562M080A452 0.040 0.030 3.90 4.50 35x456800 381LX682M080A052 0.033 0.025 3.90 4.50 35x506800 383LX682M080N042 0.041 0.031 3.90 4.49 40x408200 381L822M080A062 0.024 0.014 4.60 5.90 35x638200 383L822M080N052 0.025 0.016 4.40 5.60 40x50

10000 381L103M080A072 0.020 0.012 5.40 6.90 35x7010000 383L103M080N062 0.021 0.013 5.30 6.70 40x6312000 381L123M080A082 0.017 0.011 6.10 7.70 35x8012000 383LX123M080B052V 0.035 0.026 6.03 6.93 50x5015000 383L153M080N082 0.015 0.010 6.80 8.40 40x8015000 381LX153M080A102 0.024 0.018 6.13 7.05 35x10515000 383LX153M080B062V 0.028 0.021 6.65 7.65 50x6318000 383LX183M080B082V 0.026 0.019 7.29 8.38 50x8022000 383LX223M080N102 0.019 0.014 6.95 7.99 40x10522000 383LX223M080B092V 0.022 0.016 7.83 9.00 50x9227000 383LX273M080B102V 0.018 0.014 8.38 9.64 50x105


330 381LX331M100H202 0.603 0.456 0.80 0.90 22x20330 381L331M100H012 0.603 0.456 0.70 0.80 22x25470 381L471M100H012 0.423 0.320 1.20 1.40 22x25470 381L471M100H022 0.423 0.320 1.20 1.40 22x30470 381LX471M100J202 0.423 0.320 1.00 1.20 25x20470 381L271M100J012 0.423 0.320 1.20 1.40 25x25560 381LX561M100G022 0.355 0.268 1.10 1.30 20x30560 381LX561M100H012 0.355 0.268 1.10 1.30 22x25680 381L681M100H022 0.293 0.222 1.40 1.60 22x30680 381L681M100H042 0.293 0.222 1.40 1.60 22x40680 381L681M100J012 0.293 0.222 1.40 1.60 25x25680 381L681M100J022 0.293 0.222 1.40 1.60 25x30680 381LX681M100K202 0.293 0.222 1.10 1.30 30x20680 381L681M100K012 0.293 0.222 1.40 1.60 30x25820 381LX821M100G032 0.243 0.184 1.40 1.60 20x35820 381LX821M100H022 0.243 0.184 1.40 1.60 22x30820 381L821M100H032 0.243 0.184 1.50 1.70 22x35820 381LX821M100J012 0.243 0.184 1.40 1.60 25x25

1000 381LX102M100G042 0.199 0.151 1.70 2.00 20x401000 381LX102M100H032 0.199 0.151 1.70 2.00 22x351000 381L102M100H042 0.199 0.151 1.70 2.00 22x401000 381L102M100H052 0.199 0.151 1.70 2.00 22x501000 381LX102M100J022 0.199 0.151 1.70 2.00 25x301000 381L102M100J032 0.199 0.151 1.70 2.00 25x351000 381L102M100J042 0.199 0.151 1.70 2.00 25x401000 381L102M100K012 0.199 0.151 1.70 2.00 30x251000 381L102M100K022 0.199 0.151 1.70 2.00 30x301000 381LX102M100A202 0.199 0.151 1.20 1.40 35x201200 381LX122M100H042 0.166 0.126 1.80 2.10 22x401200 381LX122M100J032 0.166 0.126 1.80 2.10 25x351200 381LX122M100K012 0.166 0.126 1.80 2.10 30x251200 381L122M100K022 0.166 0.126 1.80 2.10 30x301500 381LX152M100H452 0.133 0.101 2.10 2.40 22x451500 381LX152M100J042 0.133 0.101 2.10 2.40 25x401500 381L152M100J052 0.133 0.101 2.10 2.40 25x50


1500 381LX152M100K022 0.133 0.101 2.10 2.40 30x301500 381L152M100K032 0.133 0.101 2.10 2.40 30x351500 381L152M100K042 0.133 0.101 2.10 2.40 30x401500 381LX152M100A012 0.133 0.101 2.10 2.40 35x251500 381L152M100A022 0.133 0.101 2.10 2.40 35x301800 381LX182M100J452 0.111 0.084 2.30 2.60 25x451800 381L182M100J052 0.111 0.084 2.30 2.60 25x501800 381LX182M100K032 0.111 0.084 2.30 2.60 30x351800 381L182M100K042 0.111 0.084 2.30 2.60 30x401800 381LX182M100A022 0.111 0.084 2.30 2.60 35x302200 381LX222M100J052 0.090 0.068 2.60 3.00 25x502200 381LX222M100K042 0.090 0.068 2.60 3.00 30x402200 381L222M100K052 0.090 0.068 2.60 3.00 30x502200 381LX222M100A022 0.090 0.068 2.60 3.00 35x302200 381L222M100A032 0.090 0.068 2.60 3.00 35x352200 381L222M100A042 0.090 0.068 2.60 3.00 35x402700 381LX272M100K452 0.074 0.056 2.90 3.30 30x452700 381L272M100K052 0.074 0.056 2.80 3.20 30x502700 381LX272M100A032 0.074 0.056 2.90 3.30 35x352700 381L272M100A042 0.074 0.056 2.80 3.20 35x403300 383L332M100N042 0.046 0.020 3.00 4.30 40x403300 381LX332M100K052 0.060 0.045 3.20 3.70 30x503300 381LX332M100A042 0.060 0.045 3.20 3.70 35x403900 381LX392M100A052 0.031 0.016 3.80 4.40 35x503900 381LX392M100A452 0.051 0.039 3.60 4.10 35x454700 381L472M100A062 0.032 0.013 4.00 5.80 35x634700 383L472M100N052 0.033 0.014 3.90 5.50 40x504700 381LX472M100A052 0.042 0.032 3.80 4.40 35x504700 383LX472M100N042 0.053 0.040 3.80 5.70 40x405600 381L562M100A072 0.027 0.011 4.70 6.70 35x705600 383L562M100N062 0.027 0.012 4.60 6.50 40x635600 381LX562M100A062 0.059 0.045 4.10 4.70 35x636800 381L682M100A082 0.023 0.010 5.30 7.50 35x806800 383LX682M100N052 0.049 0.038 4.20 4.80 40x508200 383L822M100N082 0.020 0.009 6.00 8.20 40x808200 383LX822M100B052V 0.030 0.023 6.14 7.06 50x508200 381LX822M100A082 0.040 0.031 4.50 5.10 35x808200 383LX822M100N062 0.040 0.030 4.60 5.30 40x63

10000 381LX103M100A102 0.025 0.019 6.38 7.34 35x10512000 383LX123M100B062V 0.022 0.017 7.17 8.25 50x6312000 383LX123M100N082 0.028 0.022 5.00 5.70 40x8015000 383LX153M100N102 0.017 0.012 7.37 8.48 40x10515000 383LX153M100B082V 0.019 0.014 8.01 9.21 50x8018000 383LX183M100B092V 0.017 0.012 8.64 9.94 50x9222000 383LX223M100B102V 0.015 0.011 9.32 10.72 50x105


150 381LX151M160H202 1.326 0.677 0.60 0.80 22x20150 381L151M160H012 1.326 0.677 0.70 1.00 22x25180 381L181M160H012 1.105 0.564 0.80 1.10 22x25220 381LX221M160G012 0.904 0.461 1.00 1.40 20x25220 381L221M160H022 0.904 0.461 1.00 1.40 22x30220 381LX221M160J202 0.904 0.461 0.80 1.10 25x20220 381L221M160J012 0.904 0.461 1.00 1.40 25x25270 381LX271M160G022 0.737 0.376 1.10 1.50 20x30270 381LX271M160H012 0.737 0.376 1.10 1.50 22x25270 381L271M160H022 0.737 0.376 1.10 1.50 22x30270 381L271M160J012 0.737 0.376 1.10 1.50 25x25330 381LX331M160G032 0.603 0.308 1.20 1.70 20x35330 381LX331M160H022 0.603 0.308 1.20 1.70 22x30330 381L331M160H032 0.603 0.308 1.20 1.70 22x35330 381L331M160H042 0.603 0.308 1.20 1.70 22x40330 381L331M160J022 0.603 0.308 1.20 1.70 25x30330 381LX331M160K202 0.603 0.308 1.00 1.40 30x20330 381L331M160K012 0.603 0.308 1.20 1.70 30x25390 381LX391M160G042 0.510 0.200 1.30 1.80 20x40




CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors





390 381LX391M160H022 0.510 0.200 1.30 1.80 22x30390 381L391M160H042 0.510 0.200 1.30 1.80 22x40390 381LX391M160J012 0.510 0.200 1.30 1.80 25x25390 381L391M160J022 0.510 0.200 1.30 1.80 25x30390 381L391M160K012 0.510 0.200 1.30 1.80 30x25470 381LX471M160H022 0.423 0.216 1.40 2.00 22x30470 381LX471M160H032 0.423 0.216 1.40 2.00 22x35470 381L471M160H052 0.423 0.216 1.40 2.00 22x50470 381LX471M160J022 0.423 0.216 1.40 2.00 25x30470 381L471M160J032 0.423 0.216 1.40 2.00 25x35470 381L471M160J042 0.423 0.216 1.40 2.00 25x40470 381L471M160K022 0.423 0.216 1.40 2.00 30x30470 381LX471M160A202 0.423 0.216 1.10 1.50 35x20560 381LX561M160H032 0.355 0.181 1.50 2.10 22x35560 381LX561M160H042 0.355 0.181 1.50 2.10 22x40560 381L561M160H052 0.355 0.181 1.50 2.10 22x50560 381LX561M160J022 0.355 0.181 1.50 2.10 25x30560 381L561M160J042 0.355 0.181 1.50 2.10 25x40560 381LX561M160K012 0.355 0.181 1.50 2.10 30x25560 381L561M160K032 0.355 0.181 1.50 2.10 30x30560 381L561M160A012 0.355 0.181 1.50 2.10 35x25680 381LX681M160H042 0.293 0.150 1.70 2.40 22x40680 381LX681M160H452 0.293 0.150 1.70 2.40 22x45680 381LX681M160J022 0.293 0.150 1.70 2.40 25x30680 381LX681M160J032 0.293 0.150 1.70 2.40 25x35680 381L681M160J052 0.293 0.150 1.70 2.40 25x50680 381LX681M160K022 0.293 0.150 1.70 2.40 30x30680 381L681M160K032 0.293 0.150 1.70 2.40 30x35680 381L681M160A022 0.293 0.150 1.70 2.40 35x30820 381LX821M160H452 0.243 0.124 2.00 2.80 22x45820 381LX821M160J032 0.243 0.124 2.00 2.80 25x35820 381LX821M160J042 0.243 0.124 2.00 2.80 25x40820 381L821M160J052 0.243 0.124 2.00 2.80 25x50820 381LX821M160K022 0.243 0.124 2.00 2.80 30x30820 381L821M160K042 0.243 0.124 2.00 2.80 30x40820 381L821M160K052 0.243 0.124 2.00 2.80 30x50820 381L821M160A022 0.243 0.124 2.00 2.80 35x30820 381L821M160A042 0.243 0.124 2.00 2.80 35x40

1000 381LX102M160H052 0.199 0.102 2.20 3.10 22x501000 381LX102M160J042 0.199 0.102 2.20 3.10 25x401000 381LX102M160J452 0.199 0.102 2.20 3.10 25x451000 381LX102M160K022 0.199 0.102 2.20 3.10 30x301000 381LX102M160K032 0.199 0.102 2.20 3.10 30x351000 381L102M160K052 0.199 0.102 2.20 3.10 30x501000 381LX102M160A012 0.199 0.102 2.20 3.10 35x251000 381L102M160A032 0.199 0.102 2.20 3.10 35x351200 381LX122M160J452 0.166 0.085 2.30 3.20 25x451200 381LX122M160J052 0.166 0.085 2.30 3.20 25x501200 381LX122M160K032 0.166 0.085 2.30 3.20 30x351200 381LX122M160K042 0.166 0.085 2.30 3.20 30x401200 381LX122M160A022 0.166 0.085 2.30 3.20 35x301200 381L122M160A042 0.166 0.085 2.30 3.20 35x401500 381LX152M160K042 0.133 0.068 2.50 3.50 30x401500 381LX152M160K452 0.133 0.068 2.50 3.50 30x451500 381LX152M160A022 0.133 0.068 2.50 3.50 35x301500 381LX152M160A032 0.133 0.068 2.50 3.50 35x351800 381LX182M160K452 0.111 0.057 2.70 3.80 30x451800 381LX182M160K052 0.111 0.057 2.70 3.80 30x501800 381LX182M160A032 0.111 0.057 2.70 3.80 35x351800 381LX182M160A042 0.111 0.057 2.70 3.80 35x402200 381L222M160A062 0.050 0.027 3.30 4.50 35x632200 381LX222M160A452 0.090 0.046 2.90 4.10 35x452200 381LX222M160A052 0.090 0.046 2.90 4.10 35x502200 383LX222M160N042 0.105 0.063 2.90 4.06 40x402700 381L272M160A072 0.043 0.023 3.80 5.20 35x702700 383L272M160N062 0.045 0.027 3.80 5.00 40x63

2700 381LX272M160A052 0.074 0.037 3.10 4.40 35x503300 381L332M160A082 0.037 0.020 3.80 5.90 35x803300 383LX332M160N052 0.070 0.042 3.36 4.70 40x503900 383L392M160A082 0.029 0.017 4.90 6.30 40x80


180 381L181M180H012 1.105 0.564 0.80 1.10 22x25220 381LX221M180G022 0.904 0.461 1.00 1.40 20x30220 381LX221M180H012 0.904 0.461 1.00 1.40 22x25220 381L221M180H022 0.904 0.461 1.00 1.40 22x30220 381L221M180J012 0.904 0.461 1.00 1.40 25x25270 381LX271M180G032 0.737 0.376 1.10 1.50 20x35270 381LX271M180H012 0.737 0.376 1.10 1.50 22x25270 381L271M180H032 0.737 0.376 1.10 1.50 22x35330 381LX331M180H022 0.603 0.308 1.20 1.70 22x30330 381LX331M180J012 0.603 0.308 1.20 1.70 25x25330 381L331M180J022 0.603 0.308 1.20 1.70 25x30330 381L331M180K012 0.603 0.308 1.20 1.70 30x25390 381L391M180H022 0.510 0.260 1.30 1.80 22x30390 381L391M180H042 0.510 0.260 1.30 1.80 22x40390 381LX391M180J012 0.510 0.260 1.30 1.80 25x25390 381L391M180J032 0.510 0.260 1.30 1.80 25x35470 381LX471M180H032 0.423 0.216 1.40 2.00 22x35470 381L471M180H052 0.423 0.216 1.40 2.00 22x50470 381LX471M180J022 0.423 0.216 1.40 2.00 25x30470 381L471M180J042 0.423 0.216 1.40 2.00 25x40470 381LX471M180K012 0.423 0.216 1.40 2.00 30x25470 381L471M180K022 0.423 0.216 1.40 2.00 30x30470 381L471M180A012 0.423 0.216 1.40 2.00 35x25560 381LX561M180H042 0.355 0.181 1.50 2.10 22x40560 381LX561M180J022 0.355 0.181 1.50 2.10 25x30560 381LX561M180J032 0.355 0.181 1.50 2.10 25x35560 381LX561M180K012 0.355 0.181 1.50 2.10 30x25560 381L561M180K032 0.355 0.181 1.50 2.10 30x35680 381LX681M180H452 0.293 0.149 1.70 2.40 22x45680 381LX681M180H052 0.293 0.149 1.70 2.40 22x50680 381LX681M180J032 0.293 0.149 1.70 2.40 25x35680 381LX681M180J042 0.293 0.149 1.70 2.40 25x40680 381L681M180J052 0.293 0.149 1.70 2.40 25x50680 381LX681M180K022 0.293 0.149 1.70 2.40 30x30680 381L681M180K042 0.293 0.149 1.70 2.40 30x40680 381L681M180A022 0.293 0.149 1.70 2.40 35x30820 381LX821M180H052 0.243 0.124 2.00 2.80 22x50820 381LX821M180J042 0.243 0.124 2.00 2.80 25x40820 381LX821M180J452 0.243 0.124 2.00 2.80 25x45820 381LX821M180K022 0.243 0.124 2.00 2.80 30x30820 381LX821M180K032 0.243 0.124 2.00 2.80 30x35820 381L821M180A032 0.243 0.124 2.00 2.80 35x35

1000 381LX102M180J452 0.199 0.102 2.20 3.10 25x451000 381LX102M180K032 0.199 0.102 2.20 3.10 30x351000 381LX102M180K042 0.199 0.102 2.20 3.10 30x401000 381L102M180K052 0.199 0.102 2.20 3.10 30x501000 381LX102M180A022 0.199 0.102 2.20 3.10 35x301000 381L102M180A042 0.199 0.102 2.20 3.10 35x401200 381LX122M180J052 0.166 0.085 2.30 3.20 25x501200 381LX122M180K042 0.166 0.085 2.30 3.20 30x401200 381LX122M180K452 0.166 0.085 2.30 3.20 30x451200 381LX122M180A022 0.166 0.085 2.30 3.20 35x301500 381LX152M180K452 0.133 0.068 2.50 3.50 30x451500 381LX152M180K052 0.133 0.068 2.50 3.50 30x501500 381LX152M180A032 0.133 0.068 2.50 3.50 35x351500 381LX152M180A042 0.133 0.068 2.50 3.50 35x401800 381L182M180A062 0.055 0.028 3.20 4.50 35x631800 383L182M180N052 0.059 0.033 3.10 4.20 40x501800 381LX182M180A452 0.111 0.028 2.70 3.80 35x452200 381L222M180A072 0.046 0.024 3.70 5.20 35x702200 383L222M180N062 0.048 0.027 3.70 4.90 40x63


CORNELLDUBILIER


Aluminum

Snap-InCapacitors





2200 381LX222M180A052 0.090 0.046 2.90 4.10 35x502700 381L272M180A082 0.039 0.021 4.30 5.90 35x803300 383L332M180N082 0.035 0.020 4.80 6.30 40x80


100 381LX101M200H202 1.989 1.015 0.50 0.70 22x20100 381L101M200H012 1.989 1.015 0.70 1.00 22x25150 381L151M200H012 1.326 0.677 0.80 1.10 22x25150 381L151M200H022 1.326 0.677 0.80 1.10 22x30150 381LX151M200J202 1.326 0.677 0.70 0.90 25x20150 381L151M200J012 1.326 0.677 0.80 1.10 25x25220 381LX221M200G022 0.904 0.461 1.00 1.40 20x30220 381LX221M200H012 0.904 0.461 1.00 1.40 22x25220 381L221M200H022 0.904 0.461 1.00 1.40 22x30220 381L221M200H042 0.904 0.461 1.00 1.40 22x40220 381L221M200J012 0.904 0.461 1.00 1.40 25x25220 381L221M200J022 0.904 0.461 1.00 1.40 25x30220 381LX221M200K202 0.904 0.461 0.90 1.20 30x20220 381L221M200K012 0.904 0.461 1.00 1.40 30x25270 381LX271M200G032 0.737 0.376 1.10 1.50 20x35270 381LX271M200H022 0.737 0.376 1.10 1.50 22x30270 381L271M200H032 0.737 0.376 1.10 1.50 22x35270 381LX271M200J012 0.737 0.376 1.10 1.50 25x25270 381L271M200J022 0.737 0.376 1.10 1.50 25x30270 381L271M200K012 0.737 0.376 1.10 1.50 30x25330 381LX331M200G042 0.603 0.308 1.20 1.70 20x40330 381LX331M200H022 0.603 0.308 1.20 1.70 22x30330 381L331M200H042 0.603 0.308 1.20 1.70 22x40330 381L331M200H052 0.603 0.308 1.20 1.70 22x50330 381LX331M200J012 0.603 0.308 1.20 1.70 25x25330 381L331M200J042 0.603 0.308 1.20 1.70 25x40330 381L331M200K022 0.603 0.308 1.20 1.70 30x30330 381LX331M200A202 0.603 0.308 1.10 1.50 35x20390 381LX391M200H022 0.510 0.260 1.30 1.80 22x30390 381LX391M200H032 0.510 0.260 1.30 1.80 22x35390 381LX391M200J012 0.510 0.260 1.30 1.80 25x25390 381LX391M200J022 0.510 0.260 1.30 1.80 25x30390 381L391M200J032 0.510 0.260 1.30 1.80 25x35390 381LX391M200K012 0.510 0.260 1.30 1.80 30x25390 381L391M200K022 0.510 0.260 1.30 1.80 30x30390 381L391M200A012 0.510 0.260 1.30 1.80 35x25470 381LX471M200H032 0.423 0.216 1.40 2.00 22x35470 381LX471M200H042 0.423 0.216 1.40 2.00 22x40470 381L471M200H052 0.423 0.216 1.40 2.00 22x50470 381LX471M200J022 0.423 0.216 1.40 2.00 25x30470 381LX471M200J032 0.423 0.216 1.40 2.00 25x35470 381L471M200J042 0.423 0.216 1.40 2.00 25x40470 381L471M200J052 0.423 0.216 1.40 2.00 25x50470 381LX471M200K012 0.423 0.216 1.40 2.00 30x25470 381L471M200K042 0.423 0.216 1.40 2.00 30x40470 381L471M200A022 0.423 0.216 1.40 2.00 35x30560 381LX561M200H042 0.355 0.181 1.50 2.10 22x40560 381LX561M200H452 0.355 0.181 1.50 2.10 22x45560 381LX561M200J022 0.355 0.181 1.50 2.10 25x30560 381LX561M200J032 0.355 0.181 1.50 2.10 25x35560 381L561M200J052 0.355 0.181 1.50 2.10 25x50560 381LX561M200K012 0.355 0.181 1.50 2.10 30x25560 381LX561M200K022 0.355 0.181 1.50 2.10 30x30560 381L561M200K032 0.355 0.181 1.50 2.10 30x35560 381L561M200A022 0.355 0.181 1.50 2.10 35x30680 381LX681M200H452 0.293 0.149 1.70 2.40 22x45680 381LX681M200J032 0.293 0.149 1.70 2.40 25x35680 381LX681M200J042 0.293 0.149 1.70 2.40 25x40680 381LX681M200K022 0.293 0.149 1.70 2.40 30x30680 381L681M200K042 0.293 0.149 1.70 2.40 30x40680 381L681M200K052 0.293 0.149 1.70 2.40 30x50680 381L681M200A032 0.293 0.149 1.70 2.40 35x35680 381L681M200A042 0.293 0.149 1.70 2.40 35x40820 381LX821M200J452 0.243 0.124 2.00 2.80 25x45


820 381LX821M200J052 0.243 0.124 2.00 2.80 25x50820 381LX821M200K022 0.243 0.124 2.00 2.80 30x30820 381LX821M200K032 0.243 0.124 2.00 2.80 30x35820 381L821M200K052 0.243 0.124 2.00 2.80 30x50820 381LX821M200A012 0.243 0.124 2.00 2.80 35x25820 381L821M200A042 0.243 0.124 2.00 2.80 35x40

1000 381LX102M200J052 0.199 0.102 2.20 3.10 25x501000 381LX102M200K032 0.199 0.102 2.20 3.10 30x351000 381LX102M200K042 0.199 0.102 2.20 3.10 30x401000 381LX102M200A022 0.199 0.102 2.20 3.10 35x301000 381LX102M200A032 0.199 0.102 2.20 3.10 35x351000 381L102M200A052 0.199 0.102 1.90 2.70 35x501200 381LX122M200K042 0.166 0.085 2.30 3.20 30x401200 381LX122M200K052 0.166 0.085 2.30 3.20 30x501200 381LX122M200A032 0.166 0.085 2.30 3.20 35x351200 381LX122M200A042 0.166 0.085 2.30 3.20 35x401500 381LX152M200K052 0.133 0.068 2.50 3.50 30x501500 381LX152M200A042 0.133 0.068 2.50 3.50 35x401500 381LX152M200A052 0.133 0.068 2.50 3.50 35x501800 381L182M200A062 0.055 0.028 3.20 4.50 35x631800 383L182M200N052 0.063 0.033 3.00 4.10 40x501800 381LX182M200A452 0.111 0.068 2.70 3.80 35x451800 383LX182M200N042 0.129 0.077 2.70 3.78 40x402200 381L222M200A082 0.042 0.021 4.10 5.80 35x802200 383L222M200N062 0.051 0.027 3.60 4.90 40x632200 381LX222M200A052 0.090 0.046 2.90 4.00 35x502700 383L272M200N082 0.032 0.018 4.60 6.20 40x802700 381LX272M200A062 0.092 0.047 2.80 3.90 35x632700 383LX272M200N052 0.092 0.047 2.80 3.90 40x503300 381LX332M200A082 0.075 0.038 3.00 4.20 35x803300 383LX332M200N062 0.075 0.038 3.00 4.20 40x633300 383LX332M200B052V 0.075 0.045 5.20 7.28 50x503900 383LX392M200B062V 0.064 0.038 5.90 8.26 50x634700 381LX472M200A102 0.046 0.028 5.70 7.98 35x1054700 383LX472M200N082 0.053 0.038 3.30 4.60 40x804700 383LX472M200B082V 0.053 0.032 6.82 9.55 50x805600 383LX562M200N102 0.041 0.025 6.76 9.46 40x1055600 383LX562M200B092V 0.044 0.027 7.68 10.75 50x926800 383LX682M200B102V 0.034 0.020 8.71 12.19 50x105


68 381LX680M250H202 2.926 1.493 0.40 0.60 22x2068 381L680M250H012 2.926 1.493 0.50 0.60 22x25

100 381L101M250H012 1.989 1.015 0.70 1.00 22x25100 381L101M250H022 1.989 1.015 0.70 1.00 22x30100 381LX101M250J202 1.989 1.015 0.50 0.70 25x20100 381L101M250J012 1.989 1.015 0.70 1.00 25x25150 381L151M250H022 1.326 0.677 0.80 1.10 22x30150 381L151M250H042 1.326 0.677 0.80 1.10 22x40150 381L151M250J012 1.326 0.677 0.80 1.10 25x25150 381L151M250J022 1.326 0.677 0.80 1.10 25x30150 381LX151M250K202 1.326 0.677 0.70 0.90 30x20150 381L151M250K012 1.326 0.677 0.80 1.10 30x25180 381LX181M250H012 0.921 0.461 0.90 1.26 22x25180 381LX181M250G032 1.105 0.564 0.90 1.30 20x35180 381LX181M250H022 1.105 0.564 0.90 1.30 22x30180 381L181M250H032 1.105 0.564 0.90 1.30 22x35180 381LX181M250J012 1.105 0.564 0.90 1.30 25x25220 381LX221M250G042 0.904 0.461 1.00 1.40 20x40220 381LX221M250H022 0.904 0.461 1.00 1.40 22x30220 381L221M250H042 0.904 0.461 1.00 1.40 22x40220 381L221M250H052 0.904 0.461 1.10 1.50 22x50220 381LX221M250J012 0.904 0.461 1.00 1.40 25x25220 381L221M250J022 0.904 0.461 1.00 1.40 25x30220 381L221M250J042 0.904 0.461 1.10 1.50 25x40220 381L221M250K012 0.904 0.461 1.00 1.40 30x25




CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors





220 381L221M250K022 0.904 0.461 1.10 1.50 30x30220 381LX221M250A202 0.904 0.461 0.90 1.20 35x20270 381LX271M250H032 0.737 0.376 1.10 1.50 22x35270 381LX271M250J022 0.737 0.376 1.10 1.50 25x30270 381L271M250J032 0.737 0.376 1.10 1.50 25x35270 381LX271M250K012 0.737 0.376 1.10 1.50 30x25270 381L271M250K022 0.737 0.376 1.10 1.50 30x30270 381L271M250A012 0.737 0.376 1.10 1.50 35x25330 381LX331M250H042 0.603 0.308 1.20 1.70 22x40330 381L331M250H052 0.603 0.308 1.20 1.70 22x50330 381LX331M250J022 0.603 0.308 1.20 1.70 25x30330 381LX331M250J032 0.603 0.308 1.20 1.70 25x35330 381L331M250J042 0.603 0.308 1.20 1.70 25x40330 381L331M250J052 0.603 0.308 1.30 1.80 25x50330 381LX331M250K012 0.603 0.308 1.20 1.70 30x25330 381L331M250K042 0.603 0.308 1.30 1.80 30x40330 381L331M250A022 0.603 0.308 1.30 1.80 35x30390 381LX391M250H452 0.510 0.260 1.30 1.80 22x45390 381LX391M250J032 0.510 0.260 1.30 1.80 25x35390 381LX391M250K012 0.510 0.260 1.30 1.80 30x25390 381LX391M250K022 0.510 0.260 1.30 1.80 30x30390 381L391M250A022 0.510 0.260 1.30 1.80 35x30470 381LX471M250H052 0.423 0.216 1.40 2.00 22x50470 381LX471M250J042 0.423 0.216 1.40 2.00 25x40470 381LX471M250J452 0.423 0.216 1.40 2.00 25x45470 381L471M250J052 0.423 0.216 1.40 2.00 25x50470 381LX471M250K022 0.423 0.216 1.40 2.00 30x30470 381LX471M250K032 0.423 0.216 1.40 2.00 30x35470 381L471M250K042 0.423 0.216 1.40 2.00 30x40470 381L471M250K052 0.423 0.216 1.40 2.00 30x50470 381LX471M250A022 0.423 0.216 1.40 2.00 35x30470 381L471M250A032 0.423 0.216 1.40 2.00 35x35470 381L471M250A042 0.423 0.216 1.40 2.00 35x40560 381LX561M250J452 0.355 0.181 1.50 2.10 25x45560 381LX561M250J052 0.355 0.181 1.50 2.10 25x50560 381LX561M250K032 0.355 0.181 1.50 2.10 30x35560 381L561M250K052 0.355 0.181 1.50 2.10 30x50560 381LX561M250A012 0.355 0.181 1.50 2.10 35x25560 381LX561M250A022 0.355 0.181 1.50 2.10 35x30560 381L561M250A042 0.355 0.181 1.50 2.10 35x40680 381LX681M250J052 0.244 0.134 1.70 2.38 25x50680 381LX681M250K042 0.244 0.134 1.70 2.38 30x40680 381LX681M250A022 0.244 0.134 1.70 2.38 35x30680 381LX681M250K452 0.293 0.149 1.70 2.40 30x45680 381LX681M250A032 0.293 0.149 1.70 2.40 35x35680 381L681M250A052 0.293 0.149 1.80 2.50 35x50820 381LX821M250K452 0.243 0.124 2.00 2.80 30x45820 381LX821M250K052 0.243 0.124 2.00 2.80 30x50820 381LX821M250A032 0.243 0.124 2.00 2.80 35x35820 381LX821M250A042 0.243 0.124 2.00 2.80 35x40

1000 381LX102M250K052 0.199 0.102 2.20 3.10 30x501000 381LX102M250A042 0.199 0.102 2.20 3.10 35x401000 381LX102M250A452 0.199 0.102 2.20 3.10 35x451200 383L122M250N052 0.081 0.031 2.60 4.30 40x501200 381LX122M250A452 0.166 0.085 2.30 3.20 35x451200 381LX122M250A052 0.166 0.085 2.30 3.20 35x501200 383LX122M250N042 0.180 0.117 2.66 3.72 40x401500 381L152M250A072 0.066 0.021 3.10 5.50 35x701500 381LX152M250A052 0.132 0.067 2.50 3.50 35x501800 381L182M250A082 0.057 0.018 3.60 6.30 35x801800 383L182M250N062 0.066 0.025 3.10 5.10 40x631800 383LX182M250N052 0.120 0.078 3.25 4.55 40x502200 383L222M250N082 0.043 0.017 4.00 6.40 40x802200 381LX222M250A082 0.096 0.064 3.75 5.25 35x802200 383LX222M250B052V 0.098 0.064 4.35 6.09 50x502200 383LX222M250N062 0.113 0.058 2.80 3.90 40x632700 381LX272M250A102 0.080 0.052 4.80 6.72 35x1052700 383LX272M250B062V 0.080 0.052 4.98 6.97 50x63


2700 383LX272M250N082 0.092 0.047 3.10 4.30 40x803300 383LX332M250N082 0.065 0.042 4.86 6.80 40x803900 383LX392M250N102 0.055 0.036 5.61 7.85 40x1053900 383LX392M250B082V 0.055 0.036 6.10 8.54 50x804300 383LX432M250B092V 0.050 0.033 6.67 9.34 50x924700 383LX472M250B102V 0.046 0.030 7.03 9.84 50x105


56 381L560M315H012 3.553 1.813 0.50 0.70 22x2582 381LX820M315G022 2.426 1.238 0.60 0.90 20x3082 381LX820M315H012 2.426 1.238 0.60 0.90 22x2582 381L820M315H022 2.426 1.238 0.60 0.90 22x3082 381L820M315J012 2.426 1.238 0.60 0.90 25x25

100 381LX101M315G032 1.989 1.015 0.70 1.00 20x35100 381LX101M315H022 1.989 1.015 0.70 1.00 22x30120 381LX121M315G042 1.658 0.846 0.80 1.10 20x40120 381LX121M315H022 1.658 0.846 0.80 1.10 22x30120 381L121M315H032 1.658 0.846 0.80 1.10 22x35120 381LX121M315J012 1.658 0.846 0.80 1.10 25x25120 381L121M315J022 1.658 0.846 0.80 1.10 25x30120 381L121M315K012 1.658 0.846 0.80 1.10 30x25150 381LX151M315H032 1.326 0.677 0.80 1.10 22x35150 381L151M315H042 1.326 0.677 0.80 1.10 22x40150 381LX151M315J022 1.326 0.677 0.80 1.10 25x30150 381L151M315J032 1.326 0.677 0.80 1.10 25x35150 381LX151M315K012 1.326 0.677 0.80 1.10 30x25180 381LX181M315H042 1.105 0.564 0.90 1.30 22x40180 381L181M315H052 1.105 0.564 0.90 1.30 22x50180 381LX181M315J022 1.105 0.564 0.90 1.30 25x30180 381LX181M315J032 1.105 0.564 0.90 1.30 25x35180 381L181M315J042 1.105 0.564 0.90 1.30 25x40180 381LX181M315K012 1.105 0.564 0.90 1.30 30x25180 381L181M315K022 1.105 0.564 0.90 1.30 30x30180 381L181M315A012 1.105 0.564 0.90 1.30 35x25220 381LX221M315H452 0.904 0.461 1.00 1.40 22x45220 381LX221M315J032 0.904 0.461 1.00 1.40 25x35220 381LX221M315J042 0.904 0.461 1.00 1.40 25x40220 381LX221M315K012 0.904 0.461 1.00 1.40 30x25220 381LX221M315K022 0.904 0.461 1.00 1.40 30x30220 381L221M315K032 0.904 0.461 1.00 1.40 30x35220 381L221M315A022 0.904 0.461 1.00 1.40 35x30270 381LX271M315H052 0.737 0.376 1.10 1.50 22x50270 381LX271M315J042 0.737 0.376 1.10 1.50 25x40270 381LX271M315J452 0.737 0.376 1.10 1.50 25x45270 381L271M315J052 0.737 0.376 1.10 1.50 25x50270 381LX271M315K022 0.737 0.376 1.10 1.50 30x30270 381LX271M315K032 0.737 0.376 1.10 1.50 30x35270 381L271M315K042 0.737 0.376 1.10 1.50 30x40270 381LX271M315A022 0.737 0.376 1.10 1.50 35x30330 381LX331M315J452 0.603 0.308 1.20 1.70 25x45330 381LX331M315J052 0.603 0.308 1.20 1.70 25x50330 381LX331M315K032 0.603 0.308 1.20 1.70 30x35330 381LX331M315K042 0.603 0.308 1.20 1.70 30x40330 381LX331M315A022 0.603 0.308 1.20 1.70 35x30330 381L331M315A032 0.603 0.308 1.20 1.70 35x35390 381L391M315J052 0.510 0.260 1.30 1.80 25x50390 381L391M315K042 0.510 0.260 1.30 1.80 30x40390 381LX391M315K452 0.510 0.260 1.30 1.80 30x45390 381L391M315K052 0.510 0.260 1.30 1.80 30x50390 381L391M315A022 0.510 0.260 1.30 1.80 35x30390 381LX391M315A032 0.510 0.260 1.30 1.80 35x35390 381L391M315A042 0.510 0.260 1.30 1.80 35x40470 381LX471M315K452 0.423 0.216 1.40 2.00 30x45470 381LX471M315K052 0.423 0.216 1.40 2.00 30x50470 381LX471M315A032 0.423 0.216 1.40 2.00 35x35470 381LX471M315A042 0.423 0.216 1.40 2.00 35x40560 381LX561M315K052 0.355 0.181 1.50 2.10 30x50560 381LX561M315A042 0.355 0.181 1.50 2.10 35x40560 381LX561M315A452 0.355 0.181 1.50 2.10 35x45


CORNELLDUBILIER


Aluminum

Snap-InCapacitors





680 381LX681M315A452 0.293 0.149 1.70 2.40 35x45680 381LX681M315A052 0.293 0.149 1.70 2.40 35x50820 381L821M315A062 0.180 0.130 1.70 2.10 35x63820 383L821M315N052 0.190 0.130 1.70 2.10 40x50820 381LX821M315A052 0.242 0.030 2.00 2.80 35x50

1000 381L102M315A072 0.150 0.110 2.00 2.50 35x701200 381L122M315A082 0.130 0.089 2.30 2.80 35x801200 383L122M315N062 0.150 0.110 2.10 2.50 40x631500 383L152M315N082 0.110 0.055 2.70 3.20 40x80


56 381L560M350H012 3.553 1.813 0.50 0.70 22x2568 381LX680M350G012 2.926 1.510 0.60 0.80 20x2582 381LX820M350G022 2.426 1.238 0.60 0.90 20x3082 381LX820M350H012 2.426 1.238 0.60 0.90 22x2582 381L820M350H022 2.426 1.238 0.60 0.90 22x3082 381L820M350J012 2.426 1.238 0.60 0.90 25x25

100 381LX101M350G032 1.989 1.015 0.70 1.00 20x35100 381LX101M350H022 1.989 1.015 0.70 1.00 22x30100 381L101M350H032 1.989 1.015 0.70 1.00 22x35100 381LX101M350J012 1.989 1.015 0.70 1.00 25x25100 381L101M350J022 1.989 1.015 0.70 1.00 25x30100 381L101M350K012 1.989 1.015 0.70 1.00 30x25120 381LX121M350G042 1.658 0.846 0.80 1.10 20x40120 381LX121M350H022 1.658 0.846 0.80 1.10 22x30120 381LX121M350H032 1.658 0.846 0.80 1.10 22x35120 381L121M350H042 1.658 0.846 0.80 1.10 22x40120 381LX121M350J012 1.658 0.846 0.80 1.10 25x25120 381LX121M350J022 1.658 0.846 0.80 1.10 25x30120 381L121M350J032 1.658 0.846 0.80 1.10 25x35150 381LX151M350H032 1.326 0.677 0.80 1.10 22x35150 381LX151M350H042 1.326 0.677 0.80 1.10 22x40150 381LX151M350J022 1.326 0.677 0.80 1.10 25x30150 381LX151M350K012 1.326 0.677 0.80 1.10 30x25150 381L151M350K022 1.326 0.677 0.80 1.10 30x30150 381L151M350A012 1.326 0.677 0.80 1.10 35x25180 381LX181M350H042 1.105 0.564 0.90 1.30 22x40180 381LX181M350H452 1.105 0.564 0.90 1.30 22x45180 381L181M350H052 1.105 0.564 0.90 1.30 22x50180 381LX181M350J022 1.105 0.564 0.90 1.30 25x30180 381LX181M350J032 1.105 0.564 0.90 1.30 25x35180 381L181M350J042 1.105 0.564 0.90 1.30 25x40180 381LX181M350K012 1.105 0.564 0.90 1.30 30x25180 381LX181M350K022 1.105 0.564 0.90 1.30 30x30180 381L181M350K032 1.105 0.564 0.90 1.30 30x35220 381LX221M350H452 0.904 0.461 1.00 1.40 22x45220 381LX221M350H052 0.904 0.461 1.00 1.40 22x50220 381LX221M350J032 0.904 0.461 1.00 1.40 25x35220 381LX221M350J042 0.904 0.461 1.00 1.40 25x40220 381L221M350J052 0.904 0.461 1.00 1.40 25x50220 381LX221M350K022 0.904 0.461 1.00 1.40 30x30220 381L221M350K042 0.904 0.461 1.00 1.40 30x40220 381L221M350A022 0.904 0.461 1.00 1.40 35x30270 381LX271M350J452 0.737 0.376 1.10 1.50 25x45270 381LX271M350J052 0.737 0.376 1.10 1.50 25x50270 381LX271M350K022 0.737 0.376 1.10 1.50 30x30270 381LX271M350K032 0.737 0.376 1.10 1.50 30x35270 381LX271M350A012 0.737 0.376 1.10 1.50 35x25270 381LX271M350A022 0.737 0.376 1.10 1.50 35x30270 381L271M350A032 0.737 0.376 1.10 1.50 35x35330 381LX331M350J052 0.603 0.308 1.20 1.70 25x50330 381LX331M350K042 0.603 0.308 1.20 1.70 30x40330 381LX331M350K452 0.603 0.308 1.20 1.70 30x45330 381L331M350K052 0.603 0.308 1.20 1.70 30x50330 381LX331M350A022 0.603 0.308 1.20 1.70 35x30330 381LX331M350A032 0.603 0.308 1.20 1.70 35x35330 381L331M350A042 0.603 0.308 1.20 1.70 35x40390 381LX391M350K452 0.510 0.260 1.30 1.80 30x45390 381LX391M350K052 0.510 0.260 1.30 1.80 30x50


390 381LX391M350A022 0.510 0.260 1.30 1.80 35x30390 381LX391M350A042 0.510 0.260 1.30 1.80 35x40470 381LX471M350K052 0.423 0.216 1.40 2.00 30x50470 381LX471M350A042 0.423 0.216 1.40 2.00 35x40560 383L561M350N042 0.299 0.205 1.30 1.50 40x40560 381LX561M350A452 0.355 0.181 1.50 2.10 35x45560 381LX561M350A052 0.355 0.181 1.50 2.10 35x50680 381LX681M350A052 0.293 0.149 1.70 2.40 35x50680 383LX681M350N042 0.317 0.127 2.30 3.22 40x40820 381LX821M350A062 0.303 0.155 2.70 3.70 35x63820 383LX821M350N052 0.303 0.155 2.70 3.70 40x50

1000 383L102M350N062 0.170 0.117 2.00 2.40 40x631000 381L102M350A072 0.173 0.117 1.90 2.30 35x701000 383LX102M350B052V 0.216 0.086 3.56 4.96 50x501200 381LX122M350A082 0.207 0.106 3.20 4.50 35x801200 383LX122M350N062 0.207 0.106 3.20 4.50 40x631500 381LX152M350A102 0.144 0.057 4.78 6.69 35x1051500 383LX152M350B062V 0.144 0.057 4.16 5.82 50x631500 383LX152M350N082 0.166 0.085 3.80 5.25 40x801800 383LX182M350N102 0.120 0.048 5.23 7.32 40x1051800 383LX182M350B082V 0.120 0.048 5.69 7.97 50x802000 383LX202M350B092V 0.108 0.043 6.34 8.88 50x922200 383LX222M350B102V 0.098 0.039 6.60 9.30 50x105


33 381LX330M400H202 6.029 3.080 0.20 0.30 22x2033 381L330M400H012 6.029 3.080 0.30 0.40 22x2547 381L470M400H022 4.233 2.160 0.50 0.70 22x3047 381LX470M400J202 4.233 2.160 0.30 0.40 25x2047 381LX470M400J012 4.233 2.160 0.50 0.70 25x2547 381LX470M400H012 5.644 2.880 0.50 0.70 22x2556 381LX560M400G022 3.553 1.813 0.50 0.70 20x3056 381LX560M400H012 3.553 1.813 0.50 0.70 22x2556 381L560M400H022 4.737 2.417 0.50 0.70 22x3056 381L560M400J012 4.737 2.417 0.50 0.70 25x2568 381LX680M400G032 2.926 1.493 0.60 0.80 20x3568 381LX680M400H022 2.926 1.493 0.60 0.80 22x3068 381L680M400H042 2.926 1.493 0.60 0.80 22x4068 381LX680M400J012 2.926 1.493 0.60 0.80 25x2568 381L681M400J022 2.926 1.493 0.60 0.80 25x3068 381LX680M400K202 2.926 1.493 0.40 0.50 30x2068 381L680M400K012 2.926 1.493 0.60 0.80 30x2568 381L680M400H032 3.901 1.990 0.60 0.80 22x3582 381LX820M400G042 2.426 1.238 0.60 0.90 20x4082 381LX820M400H022 2.426 1.238 0.60 0.90 22x3082 381LX820M400H032 2.426 1.238 0.60 0.90 22x3582 381LX820M400J012 2.426 1.238 0.60 0.90 25x2582 381L820M400H042 3.235 1.650 0.60 0.90 22x4082 381L820M400J022 3.235 1.650 0.60 0.90 25x3082 381L820M400K012 3.235 1.650 0.60 0.90 30x25

100 381LX101M400H022 1.989 1.015 0.70 1.00 22x30100 381LX101M400H032 1.989 1.015 0.70 1.00 22x35100 381L101M400H052 1.989 1.015 0.70 1.00 22x50100 381LX101M400J012 1.989 1.015 0.70 1.00 25x25100 381LX101M400J022 1.989 1.015 0.70 1.00 25x30100 381L101M400J042 1.989 1.015 0.70 1.00 25x40100 381L101M400K022 1.989 1.015 0.70 1.00 30x30100 381LX101M400A202 1.989 1.015 0.50 0.70 35x20100 381L101M400J032 2.653 1.354 0.70 1.00 25x35120 381LX121M400H032 1.658 0.846 0.80 1.10 22x35120 381LX121M400H042 1.658 0.846 0.80 1.10 22x40120 381LX121M400J022 1.658 0.846 0.80 1.10 25x30120 381LX121M400J032 1.658 0.846 0.80 1.10 25x35120 381LX121M400K012 1.658 0.846 0.80 1.10 30x25120 381L121M400H052 2.210 1.128 0.80 1.10 22x50120 381L121M400J042 2.210 1.128 0.80 1.10 25x40120 381L121M400K032 2.210 1.128 0.80 1.10 30x35120 381L121M400A012 2.210 1.128 0.80 1.10 35x25150 381LX151M400H042 1.326 0.677 0.80 1.10 22x40




CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors





150 381LX151M400H052 1.326 0.677 0.80 1.10 22x50150 381LX151M400J022 1.326 0.677 0.80 1.10 25x30150 381LX151M400J042 1.326 0.677 0.80 1.10 25x40150 381L151M400J052 1.326 0.677 0.80 1.10 25x50150 381LX151M400K012 1.326 0.677 0.80 1.10 30x25150 381LX151M400K022 1.326 0.677 0.80 1.10 30x30150 381L151M400K042 1.326 0.677 0.80 1.10 30x40150 381L151M400A022 1.326 0.677 0.80 1.10 35x30150 381L151M400K032 1.768 0.902 0.80 1.10 30x35180 381LX181M400H452 1.105 0.564 0.90 1.30 22x45180 381LX181M400J032 1.105 0.564 0.90 1.30 25x35180 381LX181M400J452 1.105 0.564 0.90 1.30 25x45180 381LX181M400K022 1.105 0.564 0.90 1.30 30x30180 381LX181M400K032 1.105 0.564 0.90 1.30 30x35180 381LX181M400A012 1.105 0.564 0.90 1.30 35x25180 381L181M400J052 1.474 0.752 0.90 1.30 25x50180 381L181M400K042 1.474 0.752 0.90 1.30 30x40180 381L181M400A022 1.474 0.752 0.90 1.30 35x30220 381LX221M400J452 0.904 0.461 1.00 1.40 25x45220 381LX221M400J052 0.904 0.461 1.00 1.40 25x50220 381LX221M400K022 0.904 0.461 1.00 1.40 30x30220 381LX221M400K042 0.904 0.461 1.00 1.40 30x40220 381L221M400K052 0.904 0.461 1.00 1.40 30x50220 381LX221M400A012 0.904 0.461 1.00 1.40 35x25220 381LX221M400A022 0.904 0.461 1.00 1.40 35x30220 381L221M400A042 0.904 0.461 1.00 1.40 35x40220 381L221M400A032 1.206 0.615 1.00 1.40 35x35270 381LX271M400J052 0.737 0.376 1.10 1.50 25x50270 381LX271M400K032 0.737 0.376 1.10 1.50 30x35270 381LX271M400K452 0.737 0.376 1.10 1.50 30x45270 381LX271M400A022 0.737 0.376 1.10 1.50 35x30270 381LX271M400A032 0.737 0.376 1.10 1.50 35x35270 381L271M400K052 0.982 0.501 1.10 1.50 30x50270 381L271M400A042 0.982 0.501 1.10 1.50 35x40330 381LX331M400K452 0.603 0.308 1.20 1.70 30x45330 381LX331M400K052 0.603 0.308 1.20 1.70 30x50330 381LX331M400A032 0.603 0.308 1.20 1.70 35x35330 381LX331M400A042 0.603 0.308 1.20 1.70 35x40330 381L331M400A052 0.603 0.308 1.20 1.70 35x50390 381LX391M400K052 0.510 0.260 1.30 1.80 30x50390 381LX391M400A042 0.510 0.260 1.30 1.80 35x40390 381LX391M400A452 0.510 0.260 1.30 1.80 35x45470 383LX471M400N042 0.353 0.141 1.80 2.50 40x40470 381LX471M400A452 0.423 0.216 1.40 2.00 35x45470 381LX471M400A052 0.423 0.216 1.40 2.00 35x50560 381L561M400A062 0.254 0.170 1.50 1.80 35x63560 383L561M400N052 0.259 0.145 1.50 2.00 40x50560 381LX561M400A052 0.355 0.181 1.50 2.10 35x50680 383L681M400N062 0.207 0.116 1.80 2.40 40x63680 383LX681M400N052 0.366 0.187 2.20 3.00 40x50820 383LX821M400B052V 0.202 0.061 3.20 4.40 50x50820 381LX821M400A062 0.303 0.155 2.60 3.60 35x63

1000 381LX1021M400A082 0.249 0.127 3.00 4.20 35x801000 383LX102M400N062 0.249 0.127 3.00 4.20 40x631200 381LX122M400A102 0.138 0.055 3.80 5.30 35x1051200 383LX122M400B062V 0.152 0.061 4.20 5.90 50x631200 383LX122M400N082 0.207 0.106 3.30 4.60 40x801500 383LX152M400N102 0.111 0.044 4.80 6.70 40x1051500 383LX152M400B082V 0.122 0.049 5.20 7.30 50x801600 383LX162M400B092V 0.114 0.046 5.60 8.00 50x921800 383LX182M400B102V 0.101 0.041 6.48 9.10 50x105


33 381LX330M450H012 8.038 4.101 0.40 0.50 22x2547 381LX470M450H022 5.644 2.880 0.40 0.60 22x3047 381LX470M450J012 5.644 2.880 0.40 0.60 25x2556 381LX560M450H012 2.366 0.947 0.40 0.56 22x2556 381LX560M450H032 4.737 2.417 0.50 0.70 22x3568 381LX680M450H022 1.950 0.780 0.50 0.70 22x3068 381LX680M450J012 1.950 0.780 0.50 0.70 25x2568 381LX680M450H042 3.901 1.990 0.50 0.70 22x4068 381LX680M450J022 3.901 1.990 0.50 0.70 25x3068 381LX680M450K012 3.901 1.990 0.50 0.70 30x2582 381LX820M450J012 2.022 0.708 0.56 0.78 25x2582 381LX820M450H022 3.235 1.651 0.60 0.80 22x3082 381LX820M450J032 3.235 1.651 0.60 0.80 25x35

100 381LX101M450H042 1.326 0.531 0.64 0.90 22x40100 381LX101M450K012 1.326 0.531 0.64 0.90 30x25100 381LX101M450H032 2.653 1.354 0.60 0.90 22x35100 381LX101M450H052 2.653 1.354 0.60 0.90 22x50100 381LX101M450J022 2.653 1.354 0.60 0.90 25x30100 381LX101M450J042 2.653 1.354 0.60 0.90 25x40100 381LX101M450K022 2.653 1.354 0.90 0.90 30x30100 381LX101M450A012 2.653 1.354 0.60 0.90 35x25120 381LX121M450K012 1.382 0.484 0.72 1.01 30x25120 381LX121M450H042 2.210 1.128 0.70 1.00 22x40120 381LX121M450J032 2.210 1.128 0.70 1.00 25x35120 381LX121M450K032 2.210 1.128 0.70 1.00 30x35150 381LX151M450A012 0.884 0.354 0.79 1.11 35x25150 381LX151M450H052 1.768 0.902 0.80 1.10 22x50150 381LX151M450J042 1.768 0.902 0.80 1.10 25x40150 381LX151M450J052 1.768 0.902 0.80 1.10 25x50150 381LX151M450K022 1.768 0.902 0.80 1.10 30x30150 381LX151M450K042 1.768 0.902 0.80 1.10 30x40150 381LX151M450A022 1.768 0.902 0.80 1.10 35x30180 381LX181M450J452 1.474 0.752 0.90 1.30 25x45180 381LX181M450K032 1.474 0.752 0.90 1.30 30x35180 381LX181M450A032 1.474 0.752 0.80 1.10 35x35220 381LX221M450A022 0.678 0.271 1.00 1.40 35x30220 381LX221M450J052 1.206 0.615 1.00 1.40 25x50220 381LX221M450K042 1.206 0.615 1.00 1.40 30x40220 381LX221M450K052 1.206 0.615 0.90 1.30 30x50220 381LX221M450A042 1.206 0.615 0.90 1.30 35x40270 381LX271M450K452 0.982 0.501 1.20 1.70 30x45270 381LX271M450A032 0.982 0.501 1.20 1.70 35x35330 381LX331M450K052 0.804 0.410 1.40 2.00 30x50330 381LX331M450A042 0.804 0.410 1.40 2.00 35x40390 383LX391M450N042 0.425 0.170 1.68 2.35 40x40390 381LX391M450A452 0.680 0.347 1.60 2.20 35x45470 381LX471M450A052 0.564 0.288 1.70 2.40 35x50560 383L561M450N062 0.219 0.146 1.80 2.40 40x63560 381LX561M450A062 0.444 0.226 2.20 3.00 35x63560 383LX561M450N052 0.444 0.226 2.10 2.90 40x50680 383L681M450A082 0.188 0.124 2.00 2.50 35x80680 383LX681M450B052V 0.244 0.085 2.90 4.06 50x50680 383LX681M450N062 0.366 0.187 2.50 3.50 40x63820 383L821M450N082 0.155 0.103 2.40 3.10 40x80820 383LX821M450B062V 0.222 0.078 3.42 4.79 50x63820 383LX821M450A082 0.303 0.155 2.70 3.80 35x80

1000 381LX102M450A102 0.166 0.058 3.47 4.86 35x1051000 383LX102M450N082 0.249 0.127 3.50 4.90 40x801200 383LX122M450N102 0.138 0.048 4.33 6.06 40x1051200 383LX122M450B082V 0.152 0.053 4.70 6.58 50x801300 383LX132M450B092V 0.140 0.049 5.16 7.25 50x921500 383LX152M450B102V 0.122 0.043 6.03 8.44 50x105


Type 381LR, 105 °C Ultra-High-Ripple Snap-in

CORNELLDUBILIER


Aluminum

Snap-InCapacitors

SpecificationsOperating Temperature: -40°C to + 105°C ≤315Vdc

-25°C to + 105°C ≥350VdcRated Voltage: 200 to 450 Vdc

Capacitance: 56 µF to 2,200 µF ± 20%Leakage Current: ≤ 3 √CV µA, 4 mA max, 5 minutes


Frequency


EIA Ripple Life: 10,000 h at 85 °C, full load per EIA IS-749 Capacitance 20%ESR 200% of limitDCL 100% of limit


Compared to standard 105 °C snap-ins like the Type381L/LX the new Type 381LR can handle an extra 25% rip-ple current or more. This remarkable capability stems fromadvances in electrolyte that give extremely low ESR values.In high ripple current applications like motor drives you cansave by using fewer capacitors.


Highlights The right choice for motor drive bus capacitors The right choice for UPS bus capacitors Compare to Type 381L Up to 2 times the ripple current

45 °C 60 °C 70 °C 85 °C 105 °C2.35 2.2 2.0 1.7 1.0


0.95 0.98 1.00 1.20 1.25 1.40

Outline Drawings

Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER




J01 25 0.98 25 0.98 20 A01 35 1.38 25 0.98 42J02 25 0.98 30 1.18 24 A02 35 1.38 30 1.18 48J03 25 0.98 35 1.38 27 A03 35 1.38 35 1.38 54J04 25 0.98 40 1.57 31 A04 35 1.38 40 1.57 60J45 25 0.98 45 1.77 35 A45 35 1.38 45 1.77 67J05 25 0.98 50 1.97 38 A05 35 1.38 50 1.97 74


Part Numbering System381LR 271 M 200 HO1 2


222 = 2200 µF 160 = 160 V450 = 450 V

Aluminum

Snap-InCapacitors


CORNELLDUBILIER



Ratings

200 Vdc (250 Vdc Surge)270 381LR271M200H012 0.553 0.249 1.42 2.03 22 X 25330 381LR331M200H022 0.452 0.203 1.56 2.23 22 X 30390 381LR391M200H022 0.383 0.172 1.71 2.44 22 X 30390 381LR391M200J012 0.383 0.172 1.71 2.44 25 X 25470 381LR471M200H032 0.317 0.143 1.85 2.64 22 X 35470 381LR471M200J022 0.317 0.143 1.85 2.64 25 X 30560 381LR561M200H042 0.266 0.120 2.14 3.05 22 X 40560 381LR561M200J022 0.266 0.120 2.14 3.05 25 X 30560 381LR561M200K012 0.266 0.120 2.14 3.05 30 X 25680 381LR681M200H452 0.219 0.099 2.42 3.45 22 X 45680 381LR681M200J032 0.219 0.099 2.42 3.45 25 X 35680 381LR681M200K022 0.219 0.099 2.42 3.45 30 X 30820 381LR821M200H052 0.182 0.082 2.63 3.76 22 X 50820 381LR821M200J042 0.182 0.082 2.63 3.76 25 X 40820 381LR821M200K022 0.182 0.082 2.63 3.76 30 X 30820 381LR821M200A012 0.182 0.082 2.63 3.76 35 X 25

1000 381LR102M200J452 0.149 0.067 2.84 4.06 25 X 451000 381LR102M200K032 0.149 0.067 2.84 4.06 30 X 351000 381LR102M200A022 0.149 0.067 2.84 4.06 35 X 301200 381LR122M200K042 0.124 0.062 3.13 4.47 30 X 401200 381LR122M200A032 0.124 0.062 3.13 4.47 35 X 351500 381LR152M200K052 0.099 0.050 3.56 5.06 30 X 501500 381LR152M200A042 0.099 0.050 3.56 5.06 35 X 401800 381LR182M200A452 0.083 0.041 3.84 5.48 35 X 452200 381LR222M200A052 0.066 0.040 4.12 5.89 35 X 50



250 Vdc (300 Vdc Surge)220 381LR221M250H022 0.678 0.305 1.28 1.83 22 X 30270 381LR271M250H022 0.553 0.249 1.42 2.03 22 X 30270 381LR271M250J012 0.553 0.249 1.42 2.03 25 X 25330 381LR331M250H032 0.452 0.203 1.64 2.34 22 X 35330 381LR331M250J022 0.452 0.203 1.64 2.34 25 X 30390 381LR391M250H042 0.383 0.172 1.72 2.45 22 X 40390 381LR391M250J022 0.383 0.172 1.72 2.45 25 X 30390 381LR391M250K012 0.383 0.172 1.72 2.45 30 X 25470 381LR471M250H452 0.317 0.143 1.85 2.64 22 X 45470 381LR471M250J032 0.317 0.143 1.85 2.64 25 X 35470 381LR471M250K022 0.317 0.143 1.85 2.64 30 X 30560 381LR561M250J042 0.266 0.120 2.14 3.05 25 X 40560 381LR561M250K022 0.266 0.120 2.14 3.05 30 X 30560 381LR561M250A012 0.266 0.120 2.14 3.05 35 X 25680 381LR681M250J452 0.219 0.099 2.42 3.45 25 X 45680 381LR681M250K032 0.219 0.099 2.42 3.45 30 X 35680 381LR681M250A022 0.219 0.099 2.42 3.45 35 X 30820 381LR821M250K042 0.182 0.082 2.63 3.76 30 X 40820 381LR821M250A032 0.182 0.082 2.63 3.76 35 X 35

1000 381LR102M250K052 0.149 0.067 2.84 4.06 30 X 501000 381LR102M250A042 0.149 0.067 2.84 4.06 35 X 401200 381LR122M250A452 0.124 0.062 3.13 4.47 35 X 451500 381LR152M250A052 0.099 0.050 3.56 5.06 35 X 50

400 Vdc (450 Vdc Surge)82 381LR820M400H012 1.617 0.728 0.80 1.14 22 X 25



Typical Performance CurvesLife Test, 105 °C, Full Load, 220 F, 400 V

-1

0

1

2

3

4

5

6

0 500 1000 1500 2000

Test Hours

∆ C

ap (

%)

and

DF

(%

)

0

10

20

30

DC

L (

uA)

DF

DCL

∆C

Life Test, 105 °C, Full Load, 330 F, 400 V

-1

0

1

2

3

4

5

6

7

0 500 1000 1500 2000

Test Hours

∆ C

ap (

%)

and

DF

(%

)

0

20

40

60

80

DC

L (

uA)

DF

DCL

∆C

Type 381LR Operating Life vs Ripple Current

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5


Exp

ecte

d O

pera

ting

Lif

e, k

h

45°C

55°C

65°C

75°C

85°C

95°C

105°C

Alum

inum

Snap

-InCa

paci

tors




CORNELLDUBILIER



100 381LR101M400H022 1.326 0.597 0.91 1.30 22 X 30100 381LR101M400J012 1.326 0.597 0.91 1.30 25 X 25120 381LR121M400H032 1.105 0.497 1.02 1.46 22 X 35120 381LR121M400J022 1.105 0.497 1.02 1.46 25 X 30150 381LR151M400H042 1.105 0.387 1.07 1.53 22 X 40150 381LR151M400J022 1.105 0.387 1.07 1.53 25 X 30150 381LR151M400K012 1.105 0.387 1.07 1.53 30 X 25180 381LR181M400H452 0.737 0.322 1.12 1.60 22 X 45180 381LR181M400J032 0.737 0.322 1.12 1.60 25 X 35180 381LR181M400K022 0.737 0.322 1.12 1.60 30 X 30220 381LR221M400H052 0.603 0.271 1.42 2.03 22 X 50220 381LR221M400J042 0.603 0.271 1.42 2.03 25 X 40220 381LR221M400K022 0.603 0.271 1.42 2.03 30 X 30220 381LR221M400A012 0.603 0.271 1.42 2.03 35 X 25270 381LR271M400J452 0.491 0.221 1.56 2.23 25 X 45270 381LR271M400K032 0.491 0.221 1.56 2.23 30 X 35270 381LR271M400A022 0.491 0.221 1.56 2.23 35 X 30330 381LR331M400K042 0.402 0.181 1.71 2.44 30 X 40330 381LR331M400A022 0.402 0.181 1.71 2.44 35 X 30390 381LR391M400K452 0.340 0.153 1.85 2.64 30 X 45390 381LR391M400A032 0.340 0.153 1.85 2.64 35 X 35470 381LR471M400A042 0.282 0.127 2.01 2.87 35 X 40560 381LR561M400A452 0.237 0.107 2.35 3.36 35 X 45

420 Vdc (470 Vdc Surge)68 381LR680M420H012 1.950 0.878 0.76 1.08 22 X 2582 381LR820M420H022 1.617 0.728 0.80 1.14 22 X 3082 381LR820M420J012 1.617 0.728 0.80 1.14 25 X 25

100 38L1R101M420H022 1.326 0.597 0.91 1.30 22 X 30100 381LR101M420J012 1.326 0.597 0.91 1.30 25 X 25120 381LR121M420H032 1.105 0.497 1.02 1.46 22 X 35120 381LR121M420J022 1.105 0.497 1.02 1.46 25 X 30150 381LR151M420H042 0.884 0.398 1.07 1.53 22 X 40150 381LR151M420J032 0.884 0.398 1.07 1.53 25 X 35150 381LR151M420K012 0.884 0.398 1.07 1.53 30 X 25180 381LR181M420H452 0.737 0.332 1.12 1.60 22 X 45180 381LR181M420J042 0.737 0.332 1.12 1.60 25 X 40180 381LR181M420K022 0.737 0.332 1.12 1.60 30 X 30180 381LR181M420A012 0.737 0.332 1.12 1.60 35 X 25220 381LR221M420J452 0.603 0.271 1.42 2.03 25 X 45220 381LR221M420K032 0.603 0.271 1.42 2.03 30 X 35220 381LR221M420A022 0.603 0.271 1.42 2.03 35 X 30270 381LR271M420J052 0.491 0.221 1.68 2.40 25 X 50270 381LR271M420K042 0.491 0.221 1.68 2.40 30 X 40270 381LR271M420A022 0.491 0.221 1.68 2.40 35 X 30330 381LR331M420K452 0.402 0.181 1.78 2.54 30 X 45330 381LR331M420A032 0.402 0.181 1.78 2.54 35 X 35390 381LR391M420K052 0.340 0.153 1.91 2.73 30 X 50390 381LR391M420A042 0.340 0.153 1.91 2.73 35 X 40470 381LR471M420A452 0.282 0.127 2.23 3.18 35 X 45

450 Vdc (500 Vdc Surge)56 381LR560M450H012 2.368 1.066 0.67 0.95 22 X 2568 381LR680M450H022 1.950 0.878 0.76 1.08 22 X 3068 381LR680M450J012 1.950 0.878 0.76 1.08 25 X 2582 381LR820M450H022 1.617 0.728 0.80 1.14 22 X 3082 381LR820M450J012 1.617 0.728 0.80 1.14 25 X 25

100 381LR101M450H032 1.326 0.597 0.91 1.30 22 X 35100 381LR101M450J022 1.326 0.597 0.91 1.30 25 X 30120 381LR121M450H042 1.105 0.497 1.02 1.46 22 X 40120 381LR121M450J032 1.105 0.497 1.02 1.46 25 X 35120 381LR121M450K012 1.105 0.497 1.02 1.46 30 X 25150 381LR151M450H452 0.884 0.396 1.07 1.53 22 X 45150 381LR151M450J042 0.884 0.396 1.07 1.53 25 X 40

150 381LR151M450K022 0.884 0.396 1.07 1.53 30 X 30150 381LR151M450A012 0.884 0.396 1.07 1.53 35 X 25180 381LR181M450H052 0.737 0.332 1.12 1.60 22 X 50180 381LR181M450J042 0.737 0.332 1.12 1.60 25 X 40180 381LR181M450K022 0.737 0.332 1.12 1.60 30 X 30180 381LR181M450A012 0.737 0.332 1.12 1.60 35 X 25220 381LR221M450J452 0.603 0.271 1.42 2.03 25 X 45220 381LR221M450K032 0.603 0.271 1.42 2.03 30 X 35220 381LR221M450A022 0.603 0.271 1.42 2.03 35 X 30270 381LR271M450K042 0.491 0.221 1.72 2.45 30 X 40270 381LR271M450A032 0.491 0.221 1.72 2.45 35 X 35330 381LR331M450K052 0.402 0.181 1.85 2.64 30 X 50330 381LR331M450A042 0.402 0.181 1.85 2.64 35 X 40390 381LR391M450A042 0.340 0.153 1.97 2.82 35 X 40470 381LR471M450A052 0.282 0.127 2.47 3.53 35 X 50






CORNELLDUBILIER


Aluminum

Snap-InCapacitors

Type 381EL, 105 C Ultra-Long Life Snap-In, Aluminum

The new 381EL extends expected life capability to 15 yearsor more in typical applications. And that’s with the 105 °Crated ripple current applied. With 3.5 times the life of ourlong-life Type 381LX, the Type 381EL is the choice for hotapplications like industrial power supplies, inverter lightingsystems and motor drives.

More than 100,000 Hours Operation at 65 °C and Rated 105 °C Ripple

Highlights High value extended life. Withstands 7000 hours at 105 ˚C with rated ripple current. Expected life more than 100,000 hours at 65 ˚C with rated

ripple. Rated voltage to 450 Vdc. Made in USA. 50% more ripple current than 381L.

SpecificationsOperating Temperature: 40 °C to 105 °C up to 300 V, 25 °C to 105 °C 315 V

Rated Voltage: 160 Vdc to 450 VdcCapacitance: 39 µF to 2200 F 20%

Leakage Current: 3 CV A at 5 min.Ripple Current Multipliers: Ambient Temperature

Frequency

60 Hz 120 Hz 500 Hz 1 kHz 10 kHz& up

0.80 1.0 1.2 1.25 1.4

Load Life: 7000 h @ full load at 105°C Capacitance 10%ESR 200% of limitDCL 100% of limit

EIA Ripple Life: 10,000 h @ full load at +85 °C per EIA IS-749 Capacitance 20%ESR 200% of limit

Shelf Life: 1000 h @ 105 °C, capacitance 20%, DF 200% of limit, DCL 100% of limit.Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane

45 °C 60 °C 70 °C 85 °C 105 °C2.35 2.2 2.0 1.55 1.0

µFType 381LXp 2.074

pinsType 381L

p 2.074

MORE




CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors

Ratings


270 381EL271M160H012 0.12 0.655 0.295 1.10 1.54 22 x 25330 381EL331M160H022 0.12 0.536 0.241 1.20 1.68 22 x 30390 381EL391M160H022 0.12 0.453 0.204 1.30 1.82 22 x 30390 381EL391M160J012 0.12 0.453 0.204 1.30 1.82 25 x 25470 381EL471M160H032 0.12 0.376 0.169 1.40 1.96 22 x 35470 381EL471M160J022 0.12 0.376 0.169 1.40 1.96 25 x 30560 381EL561M160H042 0.12 0.316 0.142 1.50 2.10 22 x 40560 381EL561M160J022 0.12 0.316 0.142 1.50 2.10 25 x 30560 381EL561M160K012 0.12 0.316 0.142 1.50 2.10 30 x 25680 381EL681M160H452 0.12 0.260 0.117 1.70 2.38 22 x 45680 381EL681M160J032 0.12 0.260 0.117 1.70 2.38 25 x 35680 381EL681M160K022 0.12 0.260 0.117 1.70 2.38 30 x 30820 381EL821M160J042 0.12 0.216 0.097 2.00 2.80 25 x 40820 381EL821M160K022 0.12 0.216 0.097 2.00 2.80 30 x 30

1000 381EL102M160J452 0.12 0.177 0.080 2.20 3.08 25 x 451000 381EL102M160K032 0.12 0.177 0.080 2.20 3.08 30 x 351200 381EL122M160J052 0.13 0.160 0.080 2.30 3.22 25 x 501200 381EL122M160K042 0.13 0.160 0.080 2.30 3.22 30 x 401200 381EL122M160A032 0.13 0.160 0.080 2.30 3.22 35 x 351500 381EL152M160K452 0.13 0.128 0.064 2.50 3.50 30 x 451500 381EL152M160A032 0.13 0.128 0.064 2.50 3.50 35 x 351800 381EL182M160K052 0.14 0.115 0.057 2.70 3.78 30 x 501800 381EL182M160A042 0.14 0.115 0.057 2.70 3.78 35 x 402200 381EL222M160A052 0.14 0.094 0.056 2.90 4.06 35 x 50


220 381EL221M180H012 0.12 0.804 0.362 1.00 1.40 22 x 25270 381EL271M180H012 0.12 0.655 0.295 1.10 1.54 22 x 25330 381EL331M180H022 0.12 0.536 0.241 1.20 1.68 22 x 30330 381EL331M180J012 0.12 0.536 0.241 1.20 1.68 25 x 25390 381EL391M180H022 0.12 0.453 0.204 1.30 1.82 22 x 30390 381EL391M180J012 0.12 0.453 0.204 1.30 1.82 25 x 25470 381EL471M180H032 0.12 0.376 0.169 1.40 1.96 22 x 35470 381EL471M180J022 0.12 0.376 0.169 1.40 1.96 25 x 30470 381EL471M180K012 0.12 0.376 0.169 1.40 1.96 30 x 25560 381EL561M180H042 0.12 0.316 0.142 1.50 2.10 22 x 40560 381EL561M180J032 0.12 0.316 0.142 1.50 2.10 25 x 35560 381EL561M180K012 0.12 0.316 0.142 1.50 2.10 30 x 25680 381EL681M180H052 0.12 0.260 0.117 1.70 2.38 22 x 50680 381EL681M180J042 0.12 0.260 0.117 1.70 2.38 25 x 40680 381EL681M180K022 0.12 0.260 0.117 1.70 2.38 30 x 30820 381EL821M180J452 0.12 0.216 0.097 2.00 2.80 25 x 45820 381EL821M180K032 0.13 0.234 0.105 2.00 2.80 30 x 35820 381EL821M180A022 0.13 0.234 0.105 2.00 2.80 35 x 30

1000 381EL102M180K042 0.13 0.192 0.096 2.20 3.08 30 x 401000 381EL102M180A022 0.13 0.192 0.096 2.20 3.08 35 x 301200 381EL122M180K452 0.13 0.160 0.080 2.30 3.22 30 x 451200 381EL122M180A032 0.14 0.172 0.086 2.30 3.22 35 x 351500 381EL152M180K052 0.14 0.138 0.069 2.50 3.50 30 x 501500 381EL152M180A042 0.14 0.138 0.069 2.50 3.50 35 x 401800 381EL182M180A452 0.14 0.115 0.082 2.70 3.78 35 x 452200 381EL222M180A052 0.14 0.094 0.067 2.90 4.06 35 x 50


220 381EL221M200H012 0.12 0.804 0.362 1.00 1.40 22 x 25270 381EL271M200H022 0.12 0.655 0.295 1.10 1.54 22 x 30270 381EL271M200J012 0.12 0.655 0.295 1.10 1.54 25 x 25330 381EL331M200H022 0.12 0.536 0.241 1.20 1.68 22 x 30330 381EL331M200J012 0.12 0.536 0.241 1.20 1.68 25 x 25390 381EL391M200H032 0.12 0.453 0.204 1.30 1.82 22 x 35390 381EL391M200J022 0.12 0.453 0.204 1.30 1.82 25 x 30390 381EL391M200K012 0.12 0.453 0.204 1.30 1.82 30 x 25470 381EL471M200H042 0.12 0.376 0.169 1.40 1.96 22 x 40470 381EL471M200J032 0.12 0.376 0.169 1.40 1.96 25 x 35470 381EL471M200K022 0.12 0.376 0.169 1.40 1.96 30 x 30560 381EL561M200H452 0.12 0.316 0.142 1.50 2.10 22 x 45


560 381EL561M200J032 0.12 0.316 0.142 1.50 2.10 25 x 35560 381EL561M200K022 0.12 0.316 0.142 1.50 2.10 30 x 30680 381EL681M200J042 0.12 0.260 0.117 1.70 2.38 25 x 40680 381EL681M200K032 0.12 0.260 0.117 1.70 2.38 30 x 35820 381EL821M200J052 0.12 0.216 0.097 2.00 2.80 25 x 50820 381EL821M200K042 0.12 0.216 0.097 2.00 2.80 30 x 40820 381EL821M200A022 0.12 0.216 0.097 2.00 2.80 35 x 30

1000 381EL102M200K452 0.12 0.177 0.088 2.20 3.08 30 x 451000 381EL102M200A032 0.12 0.177 0.088 2.20 3.08 35 x 351200 381EL122M200K052 0.13 0.160 0.080 2.30 3.22 30 x 501200 381EL122M200A042 0.13 0.160 0.080 2.30 3.22 35 x 401500 381EL152M200A052 0.13 0.128 0.064 2.50 3.50 35 x 50


180 381EL181M250H022 0.10 0.819 0.409 0.90 1.26 22 x 30180 381EL181M250J012 0.10 0.819 0.409 0.90 1.26 25 x 25220 381EL221M250H022 0.10 0.670 0.335 1.00 1.40 22 x 30220 381EL221M250J012 0.10 0.670 0.335 1.00 1.40 25 x 25270 381EL271M250H032 0.10 0.546 0.273 1.10 1.54 22 x 35270 381EL271M250J022 0.10 0.546 0.273 1.10 1.54 25 x 30270 381EL271M250K012 0.10 0.546 0.273 1.10 1.54 30 x 25330 381EL331M250H042 0.10 0.447 0.223 1.20 1.68 22 x 40330 381EL331M250J032 0.10 0.447 0.223 1.20 1.68 25 x 35330 381EL331M250K012 0.10 0.447 0.223 1.20 1.68 30 x 25390 381EL391M250H452 0.10 0.378 0.189 1.30 1.82 22 x 45390 381EL391M250J032 0.10 0.378 0.189 1.30 1.82 25 x 35390 381EL391M250K022 0.10 0.378 0.189 1.30 1.82 30 x 30470 381EL471M250J452 0.10 0.314 0.157 1.40 1.96 25 x 45470 381EL471M250K032 0.10 0.314 0.157 1.40 1.96 30 x 35470 381EL471M250A022 0.10 0.314 0.157 1.40 1.96 35 x 30560 381EL561M250J052 0.10 0.263 0.132 1.50 2.10 25 x 50560 381EL561M250K032 0.10 0.263 0.132 1.50 2.10 30 x 35560 381EL561M250A022 0.10 0.263 0.132 1.50 2.10 35 x 30680 381EL681M250K452 0.10 0.217 0.119 1.70 2.38 30 x 45680 381EL681M250A032 0.10 0.217 0.119 1.70 2.38 35 x 35820 381EL821M250K052 0.10 0.180 0.099 2.00 2.80 30 x 50820 381EL821M250A042 0.10 0.180 0.099 2.00 2.80 35 x 40

1000 381EL102M250A452 0.12 0.177 0.097 2.20 3.08 35 x 451200 381EL122M250A052 0.12 0.147 0.088 2.30 3.22 35 x 50


82 381EL820M315H012 0.10 1.797 0.899 0.64 0.90 22 x 25100 381EL101M315H022 0.10 1.474 0.737 0.69 0.97 22 x 30120 381EL121M315H022 0.10 1.228 0.614 0.75 1.05 22 x 30120 381EL121M315J012 0.10 1.228 0.614 0.75 1.05 25 x 25150 381EL151M315H032 0.10 0.982 0.491 0.82 1.15 22 x 35150 381EL151M315J022 0.10 0.982 0.491 0.82 1.15 25 x 30150 381EL151M315K012 0.10 0.982 0.491 0.82 1.15 30 x 25180 381EL181M315H042 0.10 0.819 0.409 0.90 1.26 22 x 40180 381EL181M315J032 0.10 0.819 0.409 0.90 1.26 25 x 35180 381EL181M315K012 0.10 0.819 0.409 0.90 1.26 30 x 25220 381EL221M315H452 0.11 0.737 0.368 1.00 1.40 22 x 45220 381EL221M315J042 0.11 0.737 0.368 1.00 1.40 25 x 40220 381EL221M315K022 0.11 0.737 0.368 1.00 1.40 30 x 30270 381EL271M315J452 0.11 0.600 0.300 1.10 1.54 25 x 45270 381EL271M315K032 0.11 0.600 0.300 1.10 1.54 30 x 35270 381EL271M315A022 0.11 0.600 0.300 1.10 1.54 35 x 30330 381EL331M315J052 0.11 0.491 0.246 1.20 1.68 25 x 50330 381EL331M315K042 0.11 0.491 0.246 1.20 1.68 30 x 40330 381EL331M315A022 0.11 0.491 0.246 1.20 1.68 35 x 30390 381EL391M315K452 0.12 0.453 0.227 1.30 1.82 30 x 45390 381EL391M315A032 0.12 0.453 0.227 1.30 1.82 35 x 35470 381EL471M315K052 0.12 0.376 0.188 1.40 1.96 30 x 50470 381EL471M315A042 0.12 0.376 0.188 1.40 1.96 35 x 40560 381EL561M315A452 0.12 0.316 0.158 1.50 2.10 35 x 45680 381EL681M315A052 0.12 0.260 0.143 1.70 2.38 35 x 50

ESR Max Ripple Amps Max25 °C 105 °C Nominal

Cap. Catalog DF Max 120 Hz 20 kHz 120 Hz 20 kHz Case SizeµF Part Number 120 Hz () () (A) (A) D x L (mm)





CORNELLDUBILIER


Aluminum

Snap-InCapacitors


Ratings


82 381EL820M350H012 0.10 1.797 0.899 0.64 0.90 22 x 25100 381EL101M350H022 0.10 1.474 0.737 0.69 0.97 22 x 30100 381EL101M350J012 0.10 1.474 0.737 0.69 0.97 25 x 25120 381EL121M350H032 0.10 1.228 0.614 0.75 1.05 22 x 35120 381EL121M350J022 0.10 1.228 0.614 0.75 1.05 25 x 30150 381EL151M350H042 0.10 0.982 0.491 0.82 1.15 22 x 40150 381EL151M350J022 0.10 0.982 0.491 0.82 1.15 25 x 30150 381EL151M350K012 0.10 0.982 0.491 0.82 1.15 30 x 25180 381EL181M350H452 0.10 0.819 0.409 0.90 1.26 22 x 45180 381EL181M350J032 0.10 0.819 0.409 0.90 1.26 25 x 35180 381EL181M350K022 0.10 0.819 0.409 0.90 1.26 30 x 30220 381EL221M350H052 0.11 0.737 0.368 1.00 1.40 22 x 50220 381EL221M350J042 0.11 0.737 0.368 1.00 1.40 25 x 40220 381EL221M350K022 0.11 0.737 0.368 1.00 1.40 30 x 30270 381EL271M350J052 0.11 0.600 0.300 1.10 1.54 25 x 50270 381EL271M350K032 0.11 0.600 0.300 1.10 1.54 30 x 35270 381EL271M350A022 0.11 0.600 0.300 1.10 1.54 35 x 30330 381EL331M350K452 0.11 0.491 0.246 1.20 1.68 30 x 45330 381EL331M350A032 0.11 0.491 0.246 1.20 1.68 35 x 35390 381EL391M350K052 0.12 0.453 0.227 1.30 1.82 30 x 50390 381EL391M350A042 0.12 0.453 0.227 1.30 1.82 35 x 40470 381EL471M350A042 0.12 0.376 0.188 1.40 1.96 35 x 40560 381EL561M350A052 0.12 0.316 0.158 1.50 2.10 35 x 50


56 381EL560M400H012 0.10 2.631 0.921 0.51 0.71 22 x 2568 381EL680M400H022 0.10 2.167 0.758 0.56 0.78 22 x 3068 381EL680M400J012 0.10 2.167 0.758 0.56 0.78 25 x 2582 381EL820M400H032 0.10 1.797 0.629 0.64 0.90 22 x 3582 381EL820M400J012 0.10 1.797 0.629 0.64 0.90 25 x 25

100 381EL101M400H032 0.10 1.474 0.516 0.69 0.97 22 x 35100 381EL101M400J022 0.10 1.474 0.516 0.69 0.97 25 x 30120 381EL121M400H042 0.10 1.228 0.430 0.75 1.05 22 x 40120 381EL121M400J032 0.10 1.228 0.430 0.75 1.05 25 x 35120 381EL121M400K012 0.10 1.228 0.430 0.75 1.05 30 x 25150 381EL151M400H052 0.10 0.982 0.344 0.82 1.15 22 x 50150 381EL151M400J042 0.10 0.982 0.344 0.82 1.15 25 x 40150 381EL151M400K022 0.10 0.982 0.344 0.82 1.15 30 x 30


180 381EL181M400J452 0.10 0.819 0.287 0.90 1.26 25 x 45180 381EL181M400K032 0.10 0.819 0.287 0.90 1.26 30 x 35180 381EL181M400A022 0.10 0.819 0.287 0.90 1.26 35 x 25220 381EL221M400J052 0.10 0.670 0.234 1.00 1.40 25 x 50220 381EL221M400K042 0.10 0.670 0.234 1.00 1.40 30 x 40220 381EL221M400A022 0.10 0.670 0.234 1.00 1.40 35 x 30270 381EL271M400K452 0.10 0.546 0.191 1.10 1.54 30 x 45270 381EL271M400A032 0.10 0.546 0.191 1.10 1.54 35 x 35330 381EL331M400K052 0.10 0.447 0.179 1.20 1.68 30 x 50330 381EL331M400A042 0.10 0.447 0.179 1.20 1.68 35 x 40390 381EL391M400A452 0.10 0.378 0.151 1.30 1.82 35 x 45470 381EL471M400A052 0.10 0.314 0.125 1.40 1.96 35 x 50


39 381EL390M450H012 0.10 3.779 1.322 0.37 0.52 22 x 2547 381EL470M450H022 0.10 3.135 1.097 0.40 0.56 22 x 3056 381EL560M450H032 0.10 2.631 0.921 0.47 0.66 22 x 3556 381EL560M450J012 0.10 2.631 0.921 0.47 0.66 25 x 2568 381EL680M450H042 0.10 2.167 0.758 0.53 0.74 22 x 4068 381EL680M450J022 0.10 2.167 0.758 0.53 0.74 25 x 3082 381EL820M450H452 0.10 1.797 0.629 0.56 0.78 22 x 4582 381EL820M450J032 0.10 1.797 0.629 0.56 0.78 25 x 3582 381EL820M450K012 0.10 1.797 0.629 0.56 0.78 30 x 25

100 381EL101M450H052 0.10 1.474 0.516 0.64 0.90 22 x 50100 381EL101M450J042 0.10 1.474 0.516 0.64 0.90 25 x 40100 381EL101M450K022 0.10 1.474 0.516 0.64 0.90 30 x 30120 381EL121M450J452 0.10 1.228 0.430 0.72 1.01 25 x 45120 381EL121M450K022 0.10 1.228 0.430 0.72 1.01 30 x 30150 381EL151M450J052 0.10 0.982 0.344 0.79 1.11 25 x 50150 381EL151M450K042 0.10 0.982 0.344 0.79 1.11 30 x 40150 381EL151M450A022 0.10 0.982 0.344 0.79 1.11 35 x 30180 381EL181M450K452 0.10 0.819 0.287 0.87 1.22 30 x 45180 381EL181M450A032 0.10 0.819 0.287 0.87 1.22 35 x 35220 381EL221M450K052 0.10 0.670 0.234 1.00 1.40 30 x 50220 381EL221M450A042 0.10 0.670 0.234 1.00 1.40 35 x 40270 381EL271M450A452 0.10 0.546 0.191 1.19 1.67 35 x 45330 381EL331M450A052 0.10 0.447 0.156 1.38 1.93 35 x 50





Outline Drawing

Part Numbering System381EL 821 M 200 K04 2

Type Capacitance Tolerance Rated Case Code Insulation390 = 39 µF M = 20% Voltage 2 = PVC122 = 1200 µF Vdc




CORNELLDUBILIER


Alum

inum

Snap

-InCa

paci

tors




H01 22 0.87 25 0.98 16H02 22 0.87 30 1.18 19H03 22 0.87 35 1.38 22H04 22 0.87 40 1.57 24H45 22 0.87 45 1.77 28H05 22 0.87 50 1.97 31

J01 25 0.98 25 0.98 20J02 25 0.98 30 1.18 24J03 25 0.98 35 1.38 27J04 25 0.98 40 1.57 31J45 25 0.98 45 1.77 35J05 25 0.98 50 1.97 38


K01 30 1.18 25 0.98 30K02 30 1.18 30 1.18 35K03 30 1.18 35 1.38 40K04 30 1.18 40 1.57 44K45 30 1.18 45 1.77 49K05 30 1.18 50 1.97 53

A01 35 1.38 25 0.98 42A02 35 1.38 30 1.18 48A03 35 1.38 35 1.38 54A04 35 1.38 40 1.57 60A45 35 1.38 45 1.77 67A05 35 1.38 50 1.97 74


Load Life 1000 µF 200 V

0

0.5

1

1.5

2

2.5

0 1000 2000 3000 4000 5000 6000 7000

Time (h) with rated ripple & 105 °C

Rat

io t

o In

itia

l Val

ue

ESR

Capacitance

DCL

Life Test Data 1000 µF 200 VCapacitance, DF, Leakage Current

Life Test Data 180 µF 450 VCapacitance, DF, Leakage Current

Load Life 180 µF 450 V

0

0.5

1

1.5

2

2.5

3

3.5

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

Time (h) with rated ripple & 105 °C

Rat

io t

o In

itia

l Val

ueESR

Capacitance

DCL

CCCCaaaappppaaaacccciiiittttaaaannnncccceeee vvvvssss TTTTeeeemmmmppppeeeerrrraaaattttuuuurrrreeee aaaannnndddd FFFFrrrreeeeqqqquuuueeeennnnccccyyyy 111100000000 FFFF 444400000000 VVVV

0000

0000....2222

0000....4444

0000....6666

0000....8888

1111

1111....2222

11110000 111100000000 1111000000000000 11110000000000000000 111100000000000000000000

FFFFrrrreeeeqqqquuuueeeennnnccccyyyy ((((HHHHzzzz))))

RRRRaaaa tttt

iiii oooo tttt oooo

22225555 °°°°

CCCC,,,, 1111

2222 0000 HHHH

zzzz VVVV

aaaa lllluuuu eeee

66665555°°°°CCCC22225555°°°°CCCC88885555°°°°CCCC

0000°°°°CCCC

––––22220000°°°°CCCC

––––44440000°°°°CCCC

CCCCaaaappppaaaacccciiiittttaaaannnncccceeee vvvvssss TTTTeeeemmmmppppeeeerrrraaaattttuuuurrrreeee aaaannnndddd FFFFrrrreeeeqqqquuuueeeennnnccccyyyy 444477770000 FFFF 222200000000 VVVV

0000

0000....2222

0000....4444

0000....6666

0000....8888

1111

1111....2222

11110000 111100000000 1111000000000000 11110000000000000000 111100000000000000000000

FFFFrrrreeeeqqqquuuueeeennnnccccyyyy ((((HHHHzzzz))))

RRRRaaaa tttt

iiii oooo tttt oooo

22225555 °°°°

CCCC,,,, 1111

2222 0000 HHHH

zzzz VVVV

aaaa lllluuuu eeee

66665555°°°°CCCC22225555°°°°CCCC88885555°°°°CCCC

0000°°°°CCCC

––––22220000°°°°CCCC

––––44440000°°°°CCCC

TTTTyyyyppppeeee 333388881111EEEELLLL OOOOppppeeeerrrraaaattttiiiinnnngggg LLLLiiiiffffeeee iiiinnnn KKKKiiiilllloooohhhhoooouuuurrrrssss vvvvssss RRRRiiiipppppppplllleeee CCCCuuuurrrrrrrreeeennnntttt

1111

11110000

111100000000

1111000000000000

0000 0000....1111 0000....2222 0000....3333 0000....4444 0000....5555 0000....6666 0000....7777 0000....8888 0000....9999 1111 1111....1111 1111....2222 1111....3333 1111....4444 1111....5555

RRRRaaaatttteeeedddd RRRRiiiipppppppplllleeee----CCCCuuuurrrrrrrreeeennnntttt MMMMuuuullllttttiiiipppplllleeee

EEEExxxx pppp

eeee cccctttt eeee

dddd OOOO

pppp eeeerrrr aaaa

tttt iiii nnnn gggg

LLLLiiii ffff

eeee ,,,, kkkk

hhhh

44445555°°°°CCCC

55555555°°°°CCCC

66665555°°°°CCCC

77775555°°°°CCCC

88885555°°°°CCCC

99995555°°°°CCCC

111100005555°°°°CCCC

2.095

CORNELLDUBILIER


Aluminum


140 Technology PlaceLiberty, SC 29657(864) 843-2277, Fax (864) 843-3800http://www.cornell-dubilier.comE-mail: [email protected]

SpecificationsOperating Temperature: 55 °C to +85 °C up to 250 Vdc, 40 °C to 85 °C 300 Vdc & up

Rated Voltage: 7.5 to 450 VdcCapacitance: 130 µF to 47,000 µF 20%

Leakage Current: 0.002 CV µA @ 25 °C and 5 minCold Impedance: 55 C multiple of 25 C Z 4 for 7.5 V, 2 for 10 V to 250 V

20 C multiple of 25 C Z 4 for 300 V and upRipple Current Multipliers: Case Temperature

Ambient Temperature, No Heatsink

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up7.5 to 63 V .94 .95 1.00 1.04 1.05 1.06 1.0680 to 420 V .80 .85 1.00 1.17 1.24 1.28 1.29

Load Life: 2,000 h @ +85 °C, Capacitance 10%, ESR 200% of limit, DCL 100% of limit, height 0.5 in. max

Shelf Life: 500 h at 85 °C, capacitance, ESR and DCL, initial requirements.Height 0.5 in max

Thermal Resistance: Maximum core temperature 88 CCore to Case, bare can 1.1 C/WCore to Case, insulated 1.6 C/W

Vibration: 10 Hz to 2 kHz, 0.06” pp max and 10 g, MIL-STD-202, Meth. 204ESL: <30 nH measured 1/4” from case at 1 MHz

Weight: Case EK 30g max.Case EB 66g max.

45 °C 55 °C 65 °C 75 °C 85 °C1.00 0.90 0.75 0.56 0.27

Type MLP, 85 C Flatpack, Ultra-Long Life, Aluminum

Type MLP 85 °C

1/2-Inch Height, 50-Year LifeThe MLP’s high-energy storage and box-shape make itperfect for voltage holdup or filtering in military SEM-Emodules, telecom circuit packs and computer cards. TheMLP delivers 25 joules of energy storage in a 1/2” heightwith 50 year’s life at +45 C. You can readily heatsink it todouble the ripple-current capability. Ratings up to 250 V canoperate at 75% of rated voltage up to 125 C if clamped orpotted to prevent expanding beyond 1/2”.

Highlights Low-profile replacement for snap-ins Double the ripple capability with a heatsink Near-hermatic welded seal assures 50-year life

45 °C 55 °C 65 °C 75 °C 85 °C3.79 3.32 2.77 2.08 1.00

ripple

Type MLSp 2.099

Type MLSp 2.099

MOREhot

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



Double the Ripple Current: Attach the MLP to an externalheatsink and you can easily double the ripple currentcapability and assure long life through cooler operation.The broad, flat top and bottom on the MLP are ideal forcooling the capacitor and removing the heat caused byripple current.

Ripple Current Capability is set by the maximum permis-sible internal core temperature, 88 C. This assures that thecase does not inflate beyond 0.5 inch height.

Air Cooled. The ripple currents in the ratings tables arefor 85C case temperatures. For air temperatures withouta heatsink use the multipliers Ambient Temperature, NoHeatsink.

Heatsink Cooled. Temperature rise from the internalhottest spot, the core, to ambient air is:

T = I2(ESR)(θcc + θca)

Specifications

Outline Drawings

Style A: Mounting Tabs Style B: Four Leads

Case L WeightCode Length gEK 1.50 30EB 3.00 66

Style C: No Tabs Style D: Hook Leads

where θcc is the thermal resistance from core to case andθca from case to ambient. To calculate maximum ripplecapability with the MLP attached to a heatsink use themaximum core temperature and the values for θcc.

As an illustration, suppose you operate an insulated MLPin 65 C air and attach it to a commercial heatsink with afree-air thermal resistance of 2.7 C/W. Use a good thermalgrease between the MLP and the heatsink, and the totalthermal resistance is 2.7 +1.6 or 4.3 C/W. The powerwhich would heat the core to 88 C is (88-65)/4.3 or 5.35 W.For an ESR of 100 mΩ, 5.35 W equates to a ripple currentof 6.5A.

Aluminum


Impedance vs. Frequency and Temperature47,000 F 75 VDC


CORNELLDUBILIER



Part Numbering SystemMLP 102 M 200 EB O A

Type Capacitance Tolerance Rated Case Code Insulation Mounting StyleMLP 821=820 F M = 20% Voltage EK, L = 1.5 in. 0 = bare can A = mounting tabs

102=1000 F Vdc EB, L = 3.0 in. 1 = polyester B = four leadsC = two leads/no tabsD = hook leads/tabsE = hook leads/no tabs

Typical Performance CurvesImpedance vs. Frequency and Temperature

47,000 F 7.5 VDC

Note: Impedance measured at ends of leads.

MLP 300 µF 400V Ripple Life Test 85°C

Rat

io to

Initi

al V

alue

Test Hours w/391V & 0.5A @ 60 Hz

MLP 4400 µF 50V Ripple Life Test 85°C

Rat

io to

Initi

al V

alue

Test Hours w/48V & 1A @ 60 Hz

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



Ratings


19,000 MLP193M7R5EK0A 76 66 4.2 4.5 EK47,000 MLP473M7R5EB0A 30 26 9.1 9.8 EB


17,000 MLP173M010EK0A 77 67 4.2 4.5 EK43,000 MLP433M010EB0A 31 27 9.0 9.6 EB















ESR max Ripple AmpsCap. Catalog mΩ Max. @ 85 °C CaseF Number 120 Hz 20 kHz 120 Hz 20 kHz Code





500 MLP501M150EK0A 355 248 1.9 2.3 EK1,300 MLP132M150EB0A 143 100 4.2 5.0 EB


400 MLP401M200EK0A 388 253 1.9 2.3 EK1,000 MLP102M200EB0A 158 100 3.8 5.0 EB


330 MLP331M250EKOA 426 258 1.8 2.3 EK820 MLP821M250EB0A 172 103 3.8 4.9 EB


220 MLP221M300EK0A 597 393 1.5 1.9 EK560 MLP561M300EB0A 240 157 3.2 4.0 EB








110 MLP111M450EK0A 1456 1190 .96 1.1 EK280 MLP281M450EB0A 585 480 2.0 2.3 EB


Aluminum



CORNELLDUBILIER



Rated Voltage: 5.0 to 250 VdcCapacitance: 220 to 47,000 µF 20%

Load Life: 2,000 h @ +125 °CLeakage Current: 0.002 CV µA @ 25 °C and 5 minCold Impedance: 55 C multiple of 25 C Z 4 for 5 V, 2 for 7.5 V and up

Ripple Current Multipliers: Case Temperature

Ambient Temperature, No Heatsink

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up

5 to 40 V .95 .96 1.00 1.03 1.04 1.04 1.0460 to 250 V .80 .84 1.00 1.18 1.25 1.30 1.30

EIA Ripple Life: 10,000 h full load at 85 C per EIA IS-749 capacitance 10%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h at 125 °C, capacitance, ESR & DCL, initial requirementsThermal Resistance: Maximum core temperature 125 C

Core to Case, bare can 1.1 C/WCore to Case, insulated 1.6 C/W

Vibration: 10 Hz to 2 kHz 0.06” pp max and 10 g, MIL-STD-202, Meth. 204ESL: < 30 nH measured 1/4” from case at 1 MHz

Weight: Case EK 43g max.Case EB 88g max.

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C 115 °C 125 °C1.41 1.32 1.22 1.12 1.00 0.87 0.71 0.50 0.00

Type MLS,125 C Stainless Flatpack, Ultra-Long Life, Aluminum

Type MLS 125 °C

The Type MLS extends the super performance of the MLPfrom a maximum operating temperature of 85 C to 125 C.While the MLP is inherently capable of operation at125 C, its flat aluminum case can’t withstand the highertemperature without inflating from internal pressure. TheMLS incorporates a rugged, stainless steel case whichassures flatness to beyond 125 C. The MLS is perfectfor hi-rel military systems and applications operatingabove 85 C.

Highlights Near-hermetic welded seal Stainless-steel case 100 years expected operating life

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C 115 °C 125 °C0.63 0.58 0.54 0.49 0.44 0.38 0.31 0.22 0.00

Type MLPp 2.095 MOREF

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



SpecificationsRipple Current Capability is set by the maximumpermissible internal core temperature, 125 C.

Air Cooled. The ripple currents in the ratings tables arefor 85C case temperatures. For air temperatures withouta heatsink use the Ambient Temperature, No Heatsinkmultipliers.

Heatsink Cooled. Temperature rise from the internalhottest spot, the core, to ambient air is:

T = I2(ESR)(θcc + θca)

where θcc is the thermal resistance from core to case andθca from case to ambient. To calculate maximum ripple

Outline Drawings

Style A: Mounting Tabs

Case L WeightCode Length gEK 1.50 43EB 3.00 88

Style C: No Tabs Style D: Hook Leads

capability with the MLP attached to a heatsink use themaximum core temperature and the values for θcc.

As an illustration, suppose you operate an insulated MLSin 65 C air and attach it to a commercial heatsink with afree-air thermal resistance of 2.7 C/W. Use a good thermalgrease between the MLS and the heatsink, and the totalthermal resistance is 2.7 +3.9 or 6.6 C/W. The powerwhich would heat the core to 125 C is (125-65)/6.6 or9.09W. For an ESR of 100 mΩ, 5.35W equates to a ripplecurrent of 9.5A.


CORNELLDUBILIER


Part Numbering SystemMLS 821 M 200 EB O A

Type Capacitance Tolerance Rated Case Code Insulation Mounting StyleMLS 821=820 F M =20% Voltage EK, L = 1.5 in. 0 = bare can A = mounting tabs

102=1000 F Vdc EB, L = 3.0 in. 1 = polyester C = two leads/no tabsD = hook leads/tabsE = hook leads/no tabs



Impedance vs. Frequency and Temperature 47,000 F 5.0 Vdc Impedance vs. Frequency and Temperature 47,000 F 50 Vdc

Impedance vs. Frequency and Temperature 900 F 150 Vdc

Aluminum


Alum

inum

Radi

al L

eade

dCa

paci

tors





CORNELLDUBILIER


Ratings

5 Vdc (7.5 Vdc Surge)

19,000 MLS193M5R0EK0C 76 66 11.6 12.5 EK47,000 MLS473M5R0EB0C 30 26 18.5 19.9 EB


17,000 MLS173M7R0EK0C 77 67 11.5 12.4 EK43,000 MLS433M7R0EB0C 31 27 18.2 19.5 EB


13,000 MLS133M010EK0C 81 69 11.3 12.2 EK38,000 MLS383M010EB0C 31 27 18.2 19.5 EB












500 MLS501M100EK0C 355 248 5.4 6.4 EK1,300 MLS132M100EB0C 143 100 8.5 10.1 EB


400 MLS401M150EK0C 388 253 5.1 6.4 EK1,000 MLS102M150EB0C 158 100 8.1 10.1 EB


330 MLS331M200EK0C 426 258 4.9 6.3 EK820 MLS821M200EB0C 172 103 7.7 10.0 EB


220 MLS221M250EK0C 597 393 4.1 5.1 EK560 MLS561M250EB0C 240 157 6.5 8.1 EB


MLS 500 F 250 V Ripple Life Test 105°C (125°C Case)

Aluminum


Type 300/301, 55 °C to 105 C Long-Life, Switching Power Grade Radial


CORNELLDUBILIER



Rated Voltage: 6.3 to 250 VdcCapacitance: 10 µF to 33,000 µF

Capacitance Tolerance: 6.3 to 100 Vdc; 10 + 75%, 160 to 250 Vdc; 10 + 50%Leakage Current: 0.5 CV A, 4 mA max, 5 minutesCold Impedance: 55 C multiple of 25 C Z 4 for 6.3 & 7.5 V, 3 for 10 to 50 V, 2 for > 50 V


Frequency50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up

Less than .77” Diameter6.3 & 7.5 V 0.76 0.81 1.00 1.23 1.35 1.41 1.4310 to 40 V 0.74 0.79 1.00 1.29 1.46 1.55 1.5750V 0.72 0.78 1.00 1.33 1.54 1.67 1.6963 & 75 V 0.71 0.76 1.00 1.38 1.64 1.82 1.86100 to 250 V 0.68 0.74 1.00 1.51 2.00 2.51 2.67

.77” Diameter6.3 & 7.5 V 0.82 0.86 1.00 1.15 1.21 1.24 1.2510 to 40 V 0.78 0.83 1.00 1.20 1.30 1.35 1.3650V 0.76 0.81 1.00 1.25 1.38 1.45 1.4763 & 75 V 0.74 0.80 1.00 1.28 1.43 1.52 1.54100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46


1.02” Diameter6.3 & 7.5 V 0.84 0.88 1.00 1.12 1.17 1.19 1.2010 to 40 V 0.81 0.86 1.00 1.15 1.22 1.25 1.2650V 0.76 0.81 1.00 1.23 1.35 1.42 1.4463 & 75 V 0.77 0.81 1.00 1.23 1.35 1.42 1.44100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46

Load Life: 4000 h at full load at 85 C Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h at 105 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.66 1.52 1.37 1.20 1.00 0.75 0.36

High Capacitance and Ultra-Low ESRThe Types 300 and 301 are the wide-temperature, low-ESRcapacitors for power-supply outputs and UPS batterystiffening. The exceptionally low ESRs enable high ripple-current capability. With series inductance of 12 to 16 nHand ripple currents to 16 amps one of these capacitors cansave by replacing three or four of the 12.5 mm diametercapacitors routinely at the output of switching powersupplies. Type 300 has three leads for rugged, reverse-proofmounting, and Type 301 has two leads. Types 300R and301R deliver even lower ESR and higher ripple.

Highlights Now 4000 hour load life Ripple Current to 16 amps ESRs to 6 mΩ > 90% capacitance at 40 C Replaces multiple capacitors

Low z

Type 330p 2.111

Type 350p 2.120

MORELife

Temp

Ripple

Type 325p 2.116

Type 325p 2.116

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



Case Dimensions

Outline Drawings

S2

Type301/301R

TwoLeads

Type300/300R

ThreeLeads

S2

S1

0.77”, 0.895” and 1.02” Diameters 0.51”, 0.65” and 0.73” Diameters

Insulated Epoxy Bare Can Lead Spacing Lead DiameterCase D0.015 (0.4 mm) endseal D0.015 (0.4 mm) Type 300 Type 301 dia. AWGCode L0.062 (1.6 mm) L Max L0.030 (0.8 mm) S1 T S2

D x L D x L 0.020 (0.5 mm) 0.020 (0.5 mm)Case Dimensions in Inches

EG 0.512x0.846 0.906 0.492x0.787 0.197 0.098 0.197 0.032 20EK 0.512x1.043 1.142 0.492x0.984 0.197 0.098 0.197 0.032 20EM 0.512x1.102 1.161 0.492x1.043 0.197 0.098 0.197 0.032 20EN 0.512x1.378 1.417 0.492x1.319 0.197 0.098 0.197 0.032 20ER 0.512x1.732 1.791 0.492x1.673 0.197 0.098 0.197 0.032 20FK 0.650x1.043 1.098 0.63x0.984 0.295 0.148 0.295 0.032 20FF 0.650x1.319 1.417 0.63x1.260 0.295 0.148 0.295 0.032 20FQ 0.650x1.476 1.575 0.63x1.417 0.295 0.148 0.295 0.032 20FV 0.650x1.634 1.669 0.63x1.575 0.295 0.148 0.295 0.032 20LQ 0.728x1.476 1.575 0.709x1.417 0.295 0.148 0.295 0.032 20LV 0.728x1.634 1.693 0.709x1.575 0.295 0.148 0.295 0.032 20GE 0.765x1.150 1.212 0.75x1.125 0.200 0.300 0.300 0.040 18GJ 0.765x1.650 1.712 0.75x1.625 0.200 0.300 0.300 0.040 18GL 0.765x2.150 2.212 0.75x2.125 0.200 0.300 0.300 0.040 18GP 0.765x2.650 2.712 0.75x2.625 0.200 0.300 0.300 0.040 18GS 0.765x3.150 3.212 0.75x3.125 0.200 0.300 0.300 0.040 18GT 0.765 x 3.65 3.712 0.75 x 3.625 0.200 0.300 0.300 0.040 18HE 0.890 x 1.150 1.212 0.875 x 1.125 0.300 0.400 0.300 0.040 18HJ 0.890 x 1.650 1.712 0.875 x 1.625 0.300 0.400 0.300 0.040 18HL 0.890 x 2.150 2.212 0.875 x 2.125 0.300 0.400 0.300 0.040 18HP 0.890 x 2.650 2.712 0.875 x 2.625 0.300 0.400 0.300 0.040 18HS 0.890 x 3.150 3.212 0.875 x 3.125 0.300 0.400 0.300 0.040 18HT 0.890 x 3.650 3.712 0.875 x 3.625 0.300 0.400 0.300 0.040 18JJ 1.015 x1.650 1.712 1.00 x 1.625 0.300 0.400 0.400 0.040 18JL 1.015 x 2.150 2.212 1.00 x 2.125 0.300 0.400 0.400 0.040 18JP 1.015 x 2.650 2.712 1.00 x 2.625 0.300 0.400 0.400 0.040 18JS 1.015 x 3.150 3.212 1.00 x 3.125 0.300 0.400 0.400 0.040 18JT 1.015 x 3.650 3.712 1.00 x 3.625 0.300 0.400 0.400 0.040 18

Case Dimensions in MillimetersEG 13.0x21.5 23.0 12.5x20.0 5.00 2.5 5 0.81 20EK 13.0x26.5 29.0 12.5x25.0 5.00 2.5 5 0.81 20EM 13.0x28.0 29.5 12.5x26.5 5.00 2.5 5 0.81 20EN 13.0x35.0 36.0 12.5x33.5 5.00 2.5 5 0.81 20ER 13.0x44.0 45.5 12.5x42.5 5.00 2.5 5 0.81 20FK 16.5x26.5 27.9 16.0x25.0 7.50 3.75 5 0.81 20FF 16.5x33.5 36.0 16.0x32.0 7.50 3.75 7.5 0.81 20FQ 16.5x37.5 40.0 16.0x36.0 7.50 3.75 7.5 0.81 20FV 16.5x41.5 42.4 16.0x40.0 7.50 3.75 7.5 0.81 20LQ 18.5x37.5 40.0 18.0x36.0 7.50 3.75 7.5 0.81 20LV 18.5x41.5 43.0 18.0x40.0 7.50 3.75 7.5 0.81 20GE 19.4x29.2 30.8 19.1x28.6 5.08 7.62 7.62 1.02 18GJ 19.4x41.9 43.5 19.1x41.3 5.08 7.62 7.62 1.02 18GL 19.4x54.6 56.2 19.1x54.0 5.08 7.62 7.62 1.02 18GP 19.4x67.3 68.9 19.1x66.7 5.08 7.62 7.62 1.02 18GS 19.4x80.0 81.6 19.1x79.4 5.08 7.62 7.62 1.02 18GT 19.4 x 92.7 94.3 19.1 x 92.1 5.08 7.62 7.62 1.02 18HE 22.6 x 29.2 30.8 22.2 x28.6 7.62 10.16 7.62 1.02 18HJ 22.6 x 41.9 43.5 22.2 x41.3 7.62 10.16 7.62 1.02 18HL 22.6 x 54.6 56.2 22.2 x54.0 7.62 10.16 7.62 1.02 18HP 22.6 x 67.3 68.9 22.2 x 66.7 7.62 10.16 7.62 1.02 18HS 22.6 x 80.0 81.6 22.2 x 79.4 7.62 10.16 7.62 1.02 18HT 22.6 X 92.7 94.3 22.2 X 92.1 7.62 10.16 7.62 1.02 18JJ 25.8 X 41.9 43.5 25.4 X 41.3 7.62 10.16 10.16 1.02 18JL 25.8 x 54.6 56.2 25.4 x 54.0 7.62 10.16 10.16 1.02 18JP 25.8 x 67.3 68.9 25.4 x 66.7 7.62 10.16 10.16 1.02 18JS 25.8 x 80.0 81.6 25.4 x 79.4 7.62 10.16 10.16 1.02 18JT 25.8 x 92.7 94.3 25.4 x 92.1 7.62 10.16 10.16 1.02 18

Type300/300R

ThreeLeads

Type301/301R

Two Leads

+

mm

mm

+

mm

Aluminum




CORNELLDUBILIER




301R 333 U 6R3 JS 2

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy300 - 3 leads 100= 10 F M = 20% 6R3= 6.3 Vdc 0 = none E = epoxy endseal300R - 3 leads 102= 1000 F T = 10% + 50% 063= 63 Vdc 1 = Polyester Blank =no epoxy

Low ESR U = 10 + 75% 100= 100 Vdc 2 = PVC301 - 2 leads 8 = PVC301R - 2 leads, Low ESR w/standoffs301A - Laydown 3 leads 9 = Polyester w/standoffs

300/301 Operating Life in Kilohours vs Ripple Current

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5


Exp

ecte

d Op

erat

ing

Life

, kh

45°C

55°C

65°C

75°C

85°C

95°C105

Alum

inum

Radi

al L

eade

dCa

paci

tors





CORNELLDUBILIER


Ratings


680 301681U6R3EM2 231 150 1.16 1.44 .51 X 1.101000 301102U6R3FK2 160 90.0 1.54 2.05 .65 X 1.041200 301122U6R3ER2 134 70.0 1.78 2.46 .51 X 1.731500 301R152M6R3EG2 201 71.0 1.09 1.84 .51 X .851500 301152U6R3FN2 105 50.0 2.00 2.90 .65 X 1.322200 301R222M6R3EM2 110 60.0 1.20 1.63 .51 X 1.102700 301272U6R3GE2 143 81.5 1.71 2.13 .77 X 1.152700 301R272U6R3GE2 124 70.6 1.84 2.29 .77 X 1.153300 301R332M6R3EN2 93.0 57.0 1.78 2.28 .51 X 1.383300 301332U6R3LV2 76.0 45.0 2.61 3.39 .73 X 1.633900 301R392M6R3FK2 111 41.0 1.84 3.03 .65 X 1.043900 301392U6R3HE2 100 61.1 2.24 2.71 .895 X 1.153900 301R392U6R3HE2 86.8 50.3 2.41 2.98 .895 X 1.154700 301R472M6R3ER2 68.0 31.0 2.52 3.73 .51 X 1.734700 301472U6R3GJ2 72.5 41.3 2.65 3.30 .77 X 1.654700 301R472U6R3GJ2 62.8 35.8 2.84 3.55 .77 X 1.655600 301R562M6R3FF2 78.0 37.0 2.43 3.53 .65 X 1.325600 301562U6R3JE2 83.8 57.0 2.56 2.92 1.02 X 1.155600 301R562U6R3JE2 72.7 41.4 2.75 3.43 1.02 X 1.156800 301R682M6R3FQ2 71.0 34.0 2.53 3.65 .65 X 1.488200 301R822M6R3FV2 59.0 31.0 3.03 4.18 .65 X 1.658200 301R822M6R3LQ2 67.0 29.0 2.97 4.51 .73 X 1.488200 301822U6R3GL2 49.2 28.1 4.02 5.02 .77 X 2.158200 301R822U6R3GL2 42.7 24.3 4.32 5.40 .77 X 2.158200 301822U6R3HJ2 51.1 31.2 3.71 4.48 .895 X 1.658200 301R822U6R3HJ2 44.3 25.7 3.99 4.93 .895 X 1.65

10000 301R103M6R3LV2 54.0 24.0 3.47 5.21 .73 X 1.6310000 301103U6R3GP2 37.8 21.5 5.12 6.39 .77 X 2.6510000 301R103U6R3GP2 32.7 18.7 5.50 6.86 .77 X 2.6512000 301123U6R3GS2 31.0 17.7 6.17 7.70 .77 X 3.1512000 301R123U6R3GS2 26.8 15.3 6.62 8.27 .77 X 3.1512000 301123U6R3HL2 35.0 21.3 5.20 6.27 .895 X 2.1512000 301R123U6R3HL2 25.5 14.8 6.09 7.54 .895 X 2.1512000 301123U6R3JJ2 43.0 29.2 4.39 5.02 1.02 X 1.6512000 301R123U6R3JJ2 37.2 21.2 4.72 5.89 1.02 X 1.6515000 301153U6R3GT2 26.6 15.1 7.10 8.86 .77 X 3.6515000 301R153U6R3GT2 23.0 13.1 7.62 9.52 .77 X 3.6515000 301153U6R3HP2 27.1 16.5 6.57 7.93 .895 X 2.6515000 301R153U6R3HP2 19.5 11.3 7.75 9.60 .895 X 2.6518000 301183U6R3JL2 29.6 20.1 6.08 6.95 1.02 X 2.1518000 301R183U6R3JL2 19.1 10.9 7.57 9.45 1.02 X 2.1522000 301223U6R3HS2 22.4 13.7 7.88 9.51 .895 X 3.1522000 301R223U6R3HS2 15.9 9.2 9.35 11.6 .895 X 3.1522000 301223U6R3JP2 23.0 15.6 7.66 8.75 1.02 X 2.6522000 301R223U6R3JP2 14.7 8.4 9.59 12.0 1.02 X 2.6527000 301273U6R3HT2 19.4 11.9 9.04 10.9 .895 X 3.65

6.3 Vdc (9 Vdc Surge) (cont’d)

27000 301R273U6R3HT2 13.6 7.9 10.8 13.4 .895 X 3.6527000 301273U6R3JS2 19.2 13.0 9.11 10.4 1.02 X 3.1527000 301R273U6R3JS2 15.1 8.6 10.3 12.8 1.02 X 3.1533000 301333U6R3JT2 16.7 11.4 10.5 12.0 1.02 X 3.6533000 301R333U6R3JT2 10.4 5.9 13.3 16.6 1.02 X 3.65


2200 301222U7R5GE2 147 80.8 1.69 2.14 .77 X 1.152200 301R222U7R5GE2 127 70.0 1.81 2.30 .77 X 1.153900 301392U7R5HE2 103 61.6 2.21 2.69 .895 X 1.153900 301R392U7R5HE2 88.9 48.9 2.38 3.02 .895 X 1.154700 301472U7R5GJ2 74.5 41.0 2.61 3.32 .77 X 1.654700 301R472U7R5GJ2 64.5 35.5 2.80 3.56 .77 X 1.655600 301562U7R5JE2 85.5 56.5 2.53 2.94 1.02 X 1.155600 301R562U7R5JE2 74.1 41.5 2.72 3.42 1.02 X 1.156800 301682U7R5GL2 50.6 27.8 3.97 5.05 .77 X 2.156800 301R682U7R5GL2 43.8 24.1 4.26 5.42 .77 X 2.156800 301682U7R5HJ2 52.4 31.4 3.67 4.46 .895 X 1.656800 301R682U7R5HJ2 45.4 25.0 3.94 5.01 .895 X 1.658200 301822U7R5GP2 38.7 21.3 5.05 6.42 .77 X 2.658200 301R822U7R5GP2 33.6 18.5 5.43 6.90 .77 X 2.65

10000 301103U7R5HL2 35.8 21.5 5.14 6.25 .895 X 2.1510000 301R103U7R5HL2 26.2 14.4 6.01 7.64 .895 X 2.1510000 301103U7R5JJ2 43.8 28.9 4.35 5.05 1.02 X 1.6510000 301R103U7R5JJ2 38.0 21.3 4.67 5.89 1.02 X 1.6512000 301123U7R5GS2 31.8 17.5 6.09 7.74 .77 X 3.1512000 301R123U7R5GS2 27.5 15.1 6.54 8.31 .77 X 3.1512000 301123U7R5GT2 27.2 15.0 7.01 8.91 .77 X 3.6512000 301R123U7R5GT2 23.6 13.0 7.53 9.57 .77 X 3.6515000 301153U7R5HP2 27.7 16.6 6.50 7.91 .895 X 2.6515000 301R153U7R5HP2 20.0 11.0 7.65 9.73 .895 X 2.6515000 301153U7R5JL2 30.1 19.9 6.02 6.99 1.02 X 2.1515000 301R153U7R5JL2 19.6 10.9 7.47 9.41 1.02 X 2.1518000 301183U7R5HS2 22.9 13.8 7.79 9.48 .895 X 3.1518000 301R183U7R5HS2 16.3 9.0 9.23 11.7 .895 X 3.1522000 301223U7R5HT2 19.8 11.9 8.95 10.9 .895 X 3.6522000 301R223U7R5HT2 13.9 7.7 10.7 13.6 .895 X 3.6522000 301223U7R5JP2 23.4 15.5 7.59 8.80 1.02 X 2.6522000 301R223U7R5JP2 15.0 8.4 9.47 11.9 1.02 X 2.6527000 301273U7R5JS2 19.5 12.9 9.03 10.5 1.02 X 3.1527000 301R273U7R5JS2 15.5 8.7 10.1 12.8 1.02 X 3.1533000 301333U7R5JT2 17.0 11.2 10.4 12.1 1.02 X 3.6533000 301R333U7R5JT2 10.6 5.9 13.1 16.6 1.02 X 3.65


1000 301R102M010EG2 216 77.0 1.07 1.80 .51 X .851500 301R152M010EK2 200 64.0 1.07 1.90 .51 X 1.04

Max. ESR Ripple Amps Nominal SizeCap. Catalog mΩ @ 25 °C Max. @ 85 °C InsulatedF Number 120 Hz 20 kHz 120 Hz 20 kHz DxL (in)



Aluminum



CORNELLDUBILIER


Ratings



1800 301R182M010EM2 122 62.0 1.58 2.21 .51 X 1.101800 301182U010GE2 153 81.2 1.65 2.14 .77 X 1.151800 301R182U010GE2 133 70.3 1.77 2.30 .77 X 1.152700 301R272M010EN2 111 59.0 1.66 2.28 .51 X 1.382700 301R272M010FK2 116 42.0 2.04 3.39 .65 X 1.043300 301R332M010ER2 75.0 32.0 2.41 3.69 .51 X 1.733300 301R332U010HE2 106 61.8 2.17 2.69 .895 X 1.153300 301332U010HE2 92.3 50.8 2.33 2.97 .895 X 1.153900 301392U010GJ2 77.6 41.1 2.56 3.31 .77 X 1.653900 301R392U010GJ2 67.3 35.7 2.75 3.56 .77 X 1.654700 301R472M010FF2 87.0 38.0 2.29 3.47 .65 X 1.324700 301472U010JE2 88.3 56.5 2.49 2.94 1.02 X 1.154700 301R472U010JE2 76.5 42.8 2.68 3.37 1.02 X 1.155600 301R562M010FQ2 78.0 33.0 2.35 3.62 .65 X 1.485600 301562U010GL2 52.7 27.9 3.89 5.04 .77 X 2.155600 301R562U010GL2 45.6 24.2 4.18 5.41 .77 X 2.156800 301R682M010LQ2 71.0 31.0 2.92 4.42 .73 X 1.486800 301682U010HJ2 54.3 31.5 3.60 4.46 .895 X 1.656800 301R682U010HJ2 47.1 25.9 3.87 4.92 .895 X 1.658200 301R882M010LV2 60.0 26.0 3.30 5.01 .73 X 1.638200 301822U010GP2 40.3 21.4 4.95 6.41 .77 X 2.658200 301R822U010GP2 34.9 18.5 5.32 6.89 .77 X 2.658200 301822U010JJ2 45.2 28.9 4.28 5.05 1.02 X 1.658200 301R822U010JJ2 39.2 21.9 4.60 5.80 1.02 X 1.65

10000 301103U010GS2 33.0 17.5 5.97 7.73 .77 X 3.1510000 301R103U010GS2 28.6 15.2 6.41 8.31 .77 X 3.1510000 301103U010HL2 37.1 21.5 5.05 6.25 .895 X 2.1510000 301R103U010HL2 27.3 15.0 5.88 7.48 .895 X 2.1512000 301123U010GT2 28.3 15.0 6.88 8.91 .77 X 3.6512000 301R123U010GT2 24.5 13.0 7.39 9.57 .77 X 3.6512000 301123U010HP2 28.7 16.6 6.39 7.91 .895 X 2.6512000 301R123U010HP2 20.8 11.5 7.49 9.53 .895 X 2.6512000 301123U010JL2 31.0 19.9 5.93 6.99 1.02 X 2.1512000 301R123U010JL2 20.3 11.4 7.33 9.23 1.02 X 2.1515000 301153U010HS2 23.7 13.7 7.66 9.49 .895 X 3.1515000 301R153U010HS2 17.0 9.3 9.05 11.5 .895 X 3.1518000 301183U010HT2 20.5 11.9 8.81 10.9 .895 X 3.6518000 301R183U010HT2 14.5 8.0 10.5 13.3 .895 X 3.6518000 301183U010JP2 24.1 15.4 7.48 8.81 1.02 X 2.6518000 301R183U010JP2 15.6 8.7 9.29 11.7 1.02 X 2.6522000 301223U010JS2 20.1 12.8 8.90 10.5 1.02 X 3.1522000 301R223U010JS2 16.1 9.0 9.94 12.5 1.02 X 3.1527000 301273U010JT2 17.5 11.2 10.3 12.1 1.02 X 3.6527000 301R273U010JT2 11.0 6.2 12.9 16.3 1.02 X 3.65


820 301R821M016EG2 216 85.0 1.12 1.78 .51 X .851200 301R122M016EM2 130 66.0 1.60 2.24 .51 X 1.101500 301152U016GE2 159 80.9 1.62 2.14 .77 X 1.151500 301R152U016GE2 138 70.1 1.74 2.30 .77 X 1.151800 301R182M016EN2 122 55.0 1.85 2.76 .51 X 1.382200 301R222M016FK2 120 42.0 1.79 3.02 .65 X 1.042700 301R272M016ER2 82.0 32.0 1.66 2.65 .51 X 1.732700 301272U016HE2 110 63.7 2.14 2.65 .895 X 1.152700 301R272U016HE2 95.2 52.4 2.30 2.92 .895 X 1.153300 301R332M016FF2 78.0 32.0 2.42 3.78 .65 X 1.323300 301332U016GJ2 80.4 41.0 2.51 3.32 .77 X 1.653300 301R332U016GJ2 69.7 35.5 2.70 3.56 .77 X 1.653300 301332U016JE2 90.7 56.2 2.46 2.94 1.02 X 1.153300 301R332U016JE2 78.6 41.6 2.64 3.42 1.02 X 1.153900 301R392M016FQ2 75.0 32.0 2.59 3.97 .65 X 1.484700 301R472M016LQ2 74.0 32.0 2.85 4.34 .73 X 1.484700 301472U016GL2 54.5 27.8 3.82 5.05 .77 X 2.15


4700 301R472U016GL2 47.2 24.1 4.11 5.42 .77 X 2.154700 301472U016HJ2 56.0 32.5 3.55 4.39 .895 X 1.654700 301R472U016HJ2 48.5 26.7 3.81 4.84 .895 X 1.655600 301R562M016LV2 62.0 26.0 3.22 4.98 .73 X 1.635600 301562U016GP2 41.7 21.3 4.87 6.43 .77 X 2.655600 301R562U016GP2 36.1 18.4 5.23 6.90 .77 X 2.656800 301682U016HL2 38.2 22.2 4.97 6.15 .895 X 2.156800 301R682U016HL2 28.3 15.6 5.78 7.35 .895 X 2.156800 301682U016JJ2 46.4 28.8 4.23 5.06 1.02 X 1.656800 301R682U016JJ2 40.2 21.3 4.54 5.88 1.02 X 1.658200 301822U016GS2 34.1 17.4 5.87 7.75 .77 X 3.158200 301R822U016GS2 29.6 15.1 6.31 8.33 .77 X 3.15

10000 301103U016GT2 29.2 14.9 6.77 8.94 .77 X 3.6510000 301R103U016GT2 25.3 12.9 7.27 9.60 .77 X 3.6510000 301103U016HP2 29.5 17.1 6.30 7.79 .895 X 2.6510000 301R103U016HP2 21.6 11.9 7.36 9.36 .895 X 2.6510000 301103U016JL2 31.8 19.7 5.86 7.01 1.02 X 2.1510000 301R103U016JL2 21.0 11.1 7.21 9.33 1.02 X 2.1512000 301123U016HS2 24.4 14.1 7.55 9.35 .895 X 3.1512000 301R123U016HS2 17.6 9.7 8.89 11.3 .895 X 3.1515000 301153U016HT2 21.1 12.2 8.69 10.8 .895 X 3.6515000 301R153U016HT2 15.0 8.2 10.3 13.1 .895 X 3.6515000 301153U016JP2 24.7 15.3 7.39 8.85 1.02 X 2.6515000 301R153U016JP2 16.1 8.5 9.14 11.8 1.02 X 2.6518000 301183U016JS2 20.5 12.7 8.80 10.5 1.02 X 3.1518000 301R183U016JS2 16.6 8.8 9.79 12.7 1.02 X 3.1522000 301223U016JT2 17.9 11.1 10.1 12.1 1.02 X 3.6522000 301R223U016JT2 11.4 6.0 12.7 16.5 1.02 X 3.65


330 301331U020EM2 360 160 0.89 1.34 .51 X 1.10470 301R471M020EG2 250 77.0 0.55 0.99 .51 X .85470 301471U020FK2 240 90.0 1.22 2.00 .65 X 1.04560 301561U020ER2 220 80.0 1.41 2.34 .51 X 1.73680 301R681M020EM2 140 67.0 1.46 2.11 .51 X 1.10680 301681U020FF2 170 60.0 1.72 2.90 .65 X 1.32

1000 301R102M020EN2 114 48.0 1.10 1.69 .51 X 1.381200 301122U020GE2 159 80.9 1.62 2.14 .77 X 1.151200 301R122U020GE2 138 70.1 1.74 2.30 .77 X 1.151500 301R152M020ER2 85.0 33.0 2.23 3.58 .51 X 1.731500 301152U020LV2 90.0 50.0 2.42 3.25 .73 X 1.632200 301R222M020FQ2 77.0 32.0 2.55 3.96 .65 X 1.482200 301222U020HE2 110 61.5 2.14 2.70 .895 X 1.152200 301R222U020HE2 95.2 53.3 2.30 2.90 .895 X 1.152700 301272U020GJ2 80.4 41.0 2.51 3.32 .77 X 1.652700 301R272U020GJ2 69.7 35.5 2.70 3.56 .77 X 1.652700 301272U020JE2 90.7 57.1 2.46 2.92 1.02 X 1.152700 301R272U020JE2 78.6 49.5 2.64 3.14 1.02 X 1.153300 301R332M020LV2 62.0 26.0 3.19 4.92 .73 X 1.633900 301392U020GL2 54.5 27.8 3.82 5.05 .77 X 2.153900 301R392U020GL2 47.2 24.1 4.11 5.42 .77 X 2.153900 301392U020HJ2 56.0 31.4 3.55 4.47 .895 X 1.653900 301R392U020HJ2 48.5 27.2 3.81 4.80 .895 X 1.654700 301472U020GP2 41.7 21.3 4.87 6.43 .77 X 2.654700 301R472U020GP2 36.1 18.4 5.23 6.90 .77 X 2.655600 301562U020JJ2 46.4 29.2 4.23 5.02 1.02 X 1.655600 301R562U020JJ2 40.2 21.3 4.54 5.88 1.02 X 1.656800 301682U020GS2 34.1 17.4 5.87 7.75 .77 X 3.156800 301R682U020GS2 29.6 15.1 6.31 8.33 .77 X 3.156800 301682U020HL2 38.2 21.4 4.97 6.26 .895 X 2.156800 301R682U020HL2 28.3 15.8 5.78 7.28 .895 X 2.158200 301822U020GT2 29.2 14.9 6.77 8.94 .77 X 3.658200 301R822U020GT2 25.3 12.9 7.27 9.60 .77 X 3.65



Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER


Ratings



8200 301822U020HP2 29.5 16.5 6.30 7.93 .895 X 2.658200 301R822U020HP2 21.6 12.1 7.36 9.28 .895 X 2.658200 301822U020JL2 31.8 20.1 5.86 6.96 1.02 X 2.158200 301R822U020JL2 21.0 11.1 7.21 9.33 1.02 X 2.15

10000 301103U020HS2 24.4 13.7 7.55 9.52 .895 X 3.1510000 301R103U020HS2 17.6 9.8 8.89 11.2 .895 X 3.1512000 301123U020HT2 21.1 11.8 8.69 10.9 .895 X 3.6512000 301R123U020HT2 15.0 8.4 10.3 13.0 .895 X 3.6512000 301123U020JP2 24.7 15.6 7.39 8.77 1.02 X 2.6512000 301R123U020JP2 16.1 8.5 9.14 11.8 1.02 X 2.6515000 301153U020JS2 20.5 12.9 8.80 10.5 1.02 X 3.1515000 301R153U020JS2 13.2 7.0 11.0 14.2 1.02 X 3.1518000 301183U020JT2 17.9 11.2 10.1 12.0 1.02 X 3.6518000 301R183U020JT2 11.4 6.0 12.7 16.5 1.02 X 3.65


330 301331U025EN2 290 120 1.13 1.75 .51 X 1.38390 301R391M025EG2 267 92.0 0.89 1.52 .51 X .85470 301471U025ER2 220 80.0 1.42 2.35 .51 X 1.73560 301R561M025EK2 193 75.0 1.12 1.79 .51 X 1.04680 301R681M025EM2 160 67.0 1.40 2.17 .51 X 1.10680 301681U025FQ2 190 75.0 1.53 2.44 .65 X 1.48

1000 301R102M025EN2 152 56.0 1.62 2.67 .51 X 1.381000 301102U025GE2 170 81.8 1.57 2.13 .77 X 1.151000 301R102U025GE2 148 70.9 1.68 2.29 .77 X 1.151200 301R122M025ER2 90.0 34.0 2.20 3.58 .51 X 1.731200 301R122M025FK2 132 45.0 1.71 2.93 .65 X 1.041200 301122U025LV2 100 50.0 2.26 3.20 .73 X 1.631500 301R152M025FF2 95.0 39.0 2.20 3.44 .65 X 1.321800 301R182M025FQ2 75.0 32.0 2.59 3.97 .65 X 1.481800 301182U025HE2 117 62.1 2.07 2.68 .895 X 1.151800 301R182U025HE2 102 47.7 2.23 3.06 .895 X 1.152200 301R222M025FV2 73.0 31.0 2.69 4.13 .65 X 1.652200 301R222M025LQ2 70.0 30.0 2.84 4.34 .73 X 1.482200 301222U025GJ2 86.3 41.4 2.42 3.30 .77 X 1.652200 301R222U025GJ2 74.8 35.9 2.60 3.54 .77 X 1.652700 301R272M025LV2 62.0 26.0 3.22 4.97 .73 X 1.632700 301272U025JE2 95.8 57.5 2.39 2.91 1.02 X 1.152700 301R272U025JE2 83.0 41.5 2.57 3.42 1.02 X 1.153300 301332U025GL2 58.4 28.1 3.69 5.02 .77 X 2.153300 301R332U025GL2 50.6 24.3 3.97 5.40 .77 X 2.153300 301332U025HJ2 59.7 31.6 3.44 4.45 .895 X 1.653300 301R332U025HJ2 51.7 24.3 3.69 5.07 .895 X 1.654700 301472U025GP2 44.7 21.4 4.71 6.40 .77 X 2.654700 301R472U025GP2 38.7 18.6 5.05 6.88 .77 X 2.654700 301472U025JJ2 48.9 29.4 4.12 5.01 1.02 X 1.654700 301R472U025JJ2 42.4 21.2 4.42 5.90 1.02 X 1.655600 301562U025GS2 36.5 17.5 5.68 7.73 .77 X 3.155600 301R562U025GS2 31.6 15.2 6.10 8.30 .77 X 3.155600 301562U025HL2 42.0 22.3 4.74 6.14 .895 X 2.155600 301R562U025HL2 30.4 14.3 5.58 7.67 .895 X 2.156800 301682U025GT2 31.2 15.0 6.55 8.91 .77 X 3.656800 301R682U025GT2 27.0 13.0 7.04 9.58 .77 X 3.656800 301682U025HP2 31.3 16.6 6.11 7.91 .895 X 2.656800 301R682U025HP2 23.1 10.9 7.11 9.77 .895 X 2.656800 301682U025JL2 33.5 20.1 5.71 6.94 1.02 X 2.156800 301R682U025JL2 22.5 11.3 6.96 9.29 1.02 X 2.158200 301822U025HS2 25.8 13.7 7.34 9.50 .895 X 3.158200 301R822U025HS2 18.9 8.9 8.59 11.81 .895 X 3.15

10000 301103U025HT2 22.3 11.8 8.45 10.94 .895 X 3.6510000 301R103U025HT2 16.0 7.5 9.96 13.69 .895 X 3.6510000 301103U025JP2 26.0 15.6 7.20 8.77 1.02 X 2.6510000 301R103U025JP2 17.2 8.6 8.84 11.8 1.02 X 2.6512000 301123U025JS2 21.6 12.9 8.59 10.5 1.02 X 3.15


12000 301R123U025JS2 14.1 7.1 10.6 14.1 1.02 X 3.1515000 301153U025JT2 18.7 11.2 9.90 12.1 1.02 X 3.6515000 301R153U025JT2 12.1 6.0 12.3 16.4 1.02 X 3.65


220 301221U040FK2 480 140 0.89 1.65 .65 X 1.04330 301R331M040EM2 202 68.0 1.19 2.05 .51 X 1.10330 301331U040FN2 330 120 1.35 2.24 .65 X 1.32390 301391U040ER2 270 150 1.42 1.90 .51 X 1.73470 301R471M040FK2 133 46.0 1.66 2.82 .65 X 1.04680 301R681M040ER2 95.0 35.0 2.07 3.41 .51 X 1.73820 301821U040LV2 160 75.0 1.78 2.60 .73 X 1.63

1000 301R102M040FQ2 80.0 33.0 2.49 3.87 .65 X 1.481200 301122U040HE2 137 65.6 1.92 2.61 .895 X 1.151200 301R122U040HE2 118 52.1 2.06 2.93 .895 X 1.151500 301R152M040LV2 63.0 27.0 3.16 4.82 .73 X 1.631500 301152U040JE2 109 60.2 2.24 2.84 1.02 X 1.151500 301R152U040JE2 94.8 43.6 2.40 3.34 1.02 X 1.152200 301222U040HJ2 69.4 33.3 3.18 4.33 .895 X 1.652200 301R222U040HJ2 60.2 26.5 3.42 4.86 .895 X 1.653300 301332U040HL2 47.2 22.6 4.48 6.09 .895 X 2.153300 301R332U040HL2 36.0 15.8 5.12 7.28 .895 X 2.153300 301332U040JJ2 55.8 30.7 3.86 4.90 1.02 X 1.653300 301R332U040JJ2 48.3 22.2 4.14 5.76 1.02 X 1.653900 301R392U040GS2 37.1 16.7 5.63 7.92 .77 X 3.154700 301472U040GT2 36.4 16.4 6.06 8.52 .77 X 3.654700 301R472U040GT2 31.6 14.2 6.51 9.15 .77 X 3.654700 301472U040HP2 36.2 17.4 5.68 7.73 .895 X 2.654700 301R472U040HP2 27.4 12.0 6.54 9.29 .895 X 2.654700 301472U040JL2 38.1 20.9 5.35 6.81 1.02 X 2.154700 301R472U040JL2 26.5 12.2 6.42 8.93 1.02 X 2.155600 301562U040HS2 29.7 14.3 6.84 9.31 .895 X 3.155600 301R562U040HS2 22.2 9.8 7.91 11.2 .895 X 3.156800 301682U040HT2 25.5 12.3 7.89 10.7 .895 X 3.656800 301R682U040HT2 18.9 8.3 9.18 13.1 .895 X 3.656800 301682U040JP2 29.4 16.2 6.77 8.61 1.02 X 2.656800 301R682U040JP2 20.2 9.3 8.17 11.4 1.02 X 2.658200 301822U040JS2 24.3 13.4 8.09 10.3 1.02 X 3.158200 301R822U040JS2 16.5 7.6 9.82 13.6 1.02 X 3.15

10000 301103U040JT2 21.0 11.5 9.35 11.9 1.02 X 3.6510000 301R103U040JT2 14.1 6.5 11.4 15.9 1.02 X 3.65


100 301101U050EN2 810 260 0.65 1.14 .51 X 1.38120 301R121M050EG2 391 139 0.79 1.33 .51 X .85150 301151U050FK2 550 220 0.82 1.30 .65 X 1.04180 301R181M050EK2 261 90.0 0.95 1.61 .51 X 1.04180 301181U050ER2 500 180 0.93 1.55 .51 X 1.73220 301R221M050EM2 240 69.0 1.12 2.08 .51 X 1.04220 301221U050FN2 420 150 1.09 1.83 .65 X 1.32330 301R331M050EN2 221 63.0 1.19 2.22 .51 X 1.38390 301R391M050FK2 150 48.0 1.60 2.82 .65 X 1.04470 301R47lM050ER2 111 36.0 1.97 3.46 .51 X 1.73470 301471U050LV2 250 90.0 1.44 2.40 .73 X 1.63560 30lR561M050FF2 118 41.0 1.98 3.36 .65 X 1.32560 301R561U050GE2 216 88.6 1.39 2.05 .77 X 1.15560 301561U050GE2 249 102 1.29 1.91 .77 X 1.15680 301R681M050FQ2 102 40.0 2.31 3.69 .65 X 1.48820 301R821M050FV2 95.0 38.0 2.40 3.79 .65 X 1.63820 301R821M050LQ2 89.0 36.0 2.59 4.07 .73 X 1.48

1000 301R102M050LV2 77.0 28.0 2.90 4.81 .73 X 1.631200 301R122U050GJ2 109 44.7 2.16 3.18 .77 X 1.651200 301122U050GJ2 126 51.6 2.01 2.96 .77 X 1.651200 301122U050JE2 130 62.4 2.05 2.79 1.02 X 1.15



Aluminum



CORNELLDUBILIER



Ratings


1200 301R122U050JE2 113 43.9 2.21 3.33 1.02 X 1.151500 301R152U050GL2 73.4 30.1 3.29 4.85 .77 X 2.151500 301152U050GL2 84.7 34.7 3.07 4.52 .77 X 2.151800 301182U050HJ2 84.0 34.5 2.89 4.26 .895 X 1.651800 301R182U050HJ2 72.8 26.2 3.11 4.89 .895 X 1.652200 301R222U050GP2 55.8 22.9 4.21 6.20 .77 X 2.652200 301222U050GP2 64.4 26.4 3.92 5.77 .77 X 2.652700 301R272U050GS2 45.3 18.6 5.10 7.51 .77 X 3.152700 301272U050GS2 52.3 21.4 4.75 6.99 .77 X 3.152700 301272U050HL2 56.9 23.3 4.07 6.00 .895 X 2.152700 301R272U050HL2 44.5 16.0 4.61 7.24 .895 X 2.152700 301272U050JJ2 66.0 31.7 3.54 4.82 1.02 X 1.652700 301R272U050JJ2 57.2 22.3 3.81 5.75 1.02 X 1.653300 301R332U050GT2 38.4 15.7 5.90 8.69 .77 X 3.653300 301332U050GT2 44.3 18.2 5.49 8.09 .77 X 3.653300 301332U050HP2 43.5 17.8 5.18 7.63 .895 X 2.653300 301R332U050HP2 33.7 12.1 5.89 9.26 .895 X 2.653900 301392U050JL2 44.9 21.6 4.93 6.71 1.02 X 2.153900 301R392U050JL2 32.4 12.6 5.81 8.77 1.02 X 2.154700 301472U050HS2 35.6 14.6 6.25 9.21 .895 X 3.154700 301R472U050HS2 27.3 9.8 7.14 11.2 .895 X 3.155600 301562U050HT2 30.4 12.5 7.23 10.6 .895 X 3.655600 301R562U050HT2 23.1 8.3 8.30 13.0 .895 X 3.655600 301562U050JP2 34.5 16.6 6.25 8.50 1.02 X 2.655600 301R562U050JP2 24.6 9.6 7.40 11.2 1.02 X 2.656800 301682U050JS2 28.4 13.6 7.48 10.2 1.02 X 3.156800 301R682U050JS2 20.0 7.8 8.91 13.4 1.02 X 3.158200 301822U050JT2 24.4 11.7 8.67 11.8 1.02 X 3.658200 301R822U050JT2 17.0 6.6 10.4 15.7 1.02 X 3.65


120 301R121M063EG2 451 93.0 0.73 1.60 .51 X .85180 301R18lM063EK2 298 90.0 1.01 1.83 .51 X 1.04270 301R271M063EN2 160 55.0 1.44 2.46 .51 X 1.38330 301R331M063FK2 171 50.0 1.48 2.74 .65 X 1.04390 301R391M063ER2 130 38.0 1.83 3.38 .51 X 1.73390 301391U063GE2 281 92.7 1.22 2.00 .77 X 1.15390 301R391U063GE2 243 80.3 1.31 2.15 .77 X 1.15470 301R471M063FF2 142 43.0 1.80 3.27 .65 X 1.32560 301R561M063FQ2 120 35.0 2.05 3.80 .65 X 1.48680 301R681M063FV2 113 32.0 2.06 3.87 .65 X 1.65680 301R681M063LQ2 103 29.0 2.21 4.17 .73 X 1.48680 301681U063HE2 185 70.5 1.65 2.52 .895 X 1.15680 301R681U063HE2 161 53.0 1.77 2.90 .895 X 1.15820 301R821M063LV2 90.0 29.0 2.69 4.74 .73 X 1.63820 301821U063GJ2 142 46.7 1.89 3.11 .77 X 1.65820 301R821U063GJ2 123 40.5 2.03 3.34 .77 X 1.65

1000 301102U063JE2 144 63.2 1.95 2.78 1.02 X 1.151000 301R102U063JE2 124 43.5 2.10 3.34 1.02 X 1.151200 301122U063GL2 95.2 31.4 2.89 4.75 .77 X 2.151200 301R122U063GL2 82.5 27.2 3.11 5.10 .77 X 2.151200 301122U063HJ2 93.8 35.6 2.74 4.19 .895 X 1.651200 301R122U063HJ2 81.3 26.8 2.94 4.83 .895 X 1.651500 301152U063GP2 72.3 23.8 3.70 6.07 .77 X 2.651500 301R152U063GP2 62.6 20.7 3.97 6.52 .77 X 2.651800 301182U063HL2 63.4 24.1 3.86 5.90 .895 X 2.151800 301R182U063HL2 50.1 16.5 4.34 7.13 .895 X 2.151800 301182U063JJ2 72.8 32.0 3.37 4.80 1.02 X 1.651800 301R182U063JJ2 63.1 22.1 3.62 5.78 1.02 X 1.652200 301222U063GS2 58.6 19.3 4.48 7.36 .77 X 3.152200 301R222U063GS2 50.8 16.8 4.82 7.90 .77 X 3.152200 301222U063GT2 49.6 16.4 5.19 8.53 .77 X 3.652200 301R222U063GT2 43.0 14.2 5.58 9.16 .77 X 3.652700 301272U063HP2 48.4 18.4 4.92 7.52 .895 X 2.65


2700 301R272U063HP2 37.9 12.5 5.55 9.11 .895 X 2.652700 301272U063JL2 49.5 21.8 4.70 6.68 1.02 X 2.152700 301R272U063JL2 36.3 12.7 5.48 8.74 1.02 X 2.153300 301332U063HS2 39.5 15.0 5.94 9.08 .895 X 3.153300 301R332U063HS2 30.7 10.1 6.73 11.1 .895 X 3.153900 301392U063HT2 33.7 12.8 6.87 10.5 .895 X 3.653900 301R392U063HT2 25.9 8.5 7.84 12.9 .895 X 3.653900 301392U063JP2 37.9 16.7 5.96 8.47 1.02 X 2.653900 301R392U063JP2 27.6 9.7 6.99 11.1 1.02 X 2.654700 301472U063JS2 31.1 13.7 7.15 10.2 1.02 X 3.154700 301R472U063JS2 22.4 7.8 8.42 13.4 1.02 X 3.155600 301562U063JT2 26.7 11.7 8.30 11.8 1.02 X 3.655600 301R562U063JT2 19.0 6.6 9.83 15.7 1.02 X 3.65


330 301331U075GE2 360 155 1.08 1.55 .77 X 1.15330 301R331U075GE2 312 134 1.16 1.66 .77 X 1.15470 301471U075HE2 234 108 1.47 2.04 .895 X 1.15470 301R471U075HE2 203 87.3 1.57 2.26 .895 X 1.15560 301561U075GJ2 181 77.8 1.67 2.41 .77 X 1.65560 301R561U075GJ2 157 67.4 1.80 2.59 .77 X 1.65680 301681U075JE2 178 88.8 1.76 2.34 1.02 X 1.15680 301R681U075JE2 154 67.7 1.89 2.68 1.02 X 1.15

1000 301102U075GL2 122 52.3 2.56 3.68 .77 X 2.151000 301R102U075GL2 105 45.3 2.75 3.95 .77 X 2.151000 301102U075HJ2 118 54.3 2.44 3.39 .895 X 1.651000 301R102U075HJ2 102 44.0 2.62 3.77 .895 X 1.651200 301122U075GP2 92.0 39.5 3.28 4.71 .77 X 2.651200 301R122U075GP2 79.7 34.3 3.52 5.06 .77 X 2.651500 301152U075GS2 74.4 32.0 3.98 5.72 .77 X 3.151500 301R152U075GS2 64.4 27.7 4.27 6.15 .77 X 3.151500 301152U075HL2 79.7 36.6 3.44 4.79 .895 X 2.151500 301R152U075HL2 64.2 27.6 3.84 5.52 .895 X 2.151500 301152U075JJ2 89.9 44.9 3.04 4.05 1.02 X 1.651500 301R152U075JJ2 77.9 34.3 3.26 4.64 1.02 X 1.651800 301182U075GT2 62.7 27.0 4.62 6.64 .77 X 3.651800 301R182U075GT2 54.3 23.4 4.96 7.13 .77 X 3.652200 301222U075HP2 60.6 27.9 4.39 6.11 .895 X 2.652200 301R222U075HP2 48.5 20.9 4.91 7.06 .895 X 2.652200 301222U075JL2 60.8 30.4 4.24 5.65 1.02 X 2.152200 301R222U075JL2 46.2 20.3 4.86 6.91 1.02 X 2.152700 301272U075HS2 49.2 22.6 5.32 7.39 .895 X 3.152700 301R272U075HS2 39.1 16.8 5.96 8.57 .895 X 3.152700 301272U075HT2 41.8 19.2 6.17 8.58 .895 X 3.652700 301R272U075HT2 32.9 14.2 6.95 9.99 .895 X 3.652700 301272U075JP2 46.4 23.2 5.39 7.18 1.02 X 2.652700 301R272U075JP2 35.0 15.4 6.21 8.82 1.02 X 2.653300 301332U075JS2 37.9 19.0 6.47 8.63 1.02 X 3.153300 301R332U075JS2 28.3 12.5 7.49 10.6 1.02 X 3.153900 301392U075JT2 32.4 16.2 7.53 10.0 1.02 X 3.653900 301R392U075JT2 23.9 10.5 8.76 12.4 1.02 X 3.65


47 301470U100EG2 1770 345 0.38 0.74 .51 X .8568 301680U100EM2 1160 183 0.42 1.10 .51 X 1.10

100 301101U100EN2 756 149 0.52 1.37 .51 X 1.38120 301121U100FK2 686 139 0.55 1.48 .65 X 1.04150 301151U100ER2 519 104 0.61 1.83 .51 X 1.73150 301151U100GE2 581 221 0.85 1.30 .77 X 1.15150 301R151U100GE2 503 191 0.91 1.39 .77 X 1.15180 301181U100FF2 450 93.0 0.64 2.00 .65 X 1.32220 301221U100FQ2 365 76.0 0.69 2.31 .65 X 1.48220 301221U100HE2 371 141 1.16 1.78 .895 X 1.15220 301R221U100HE2 321 122 1.25 1.91 .895 X 1.15



Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER


Ratings


100 Vdc (140 Vdc Surge) (Cont’d)

270 301271U100FV2 298 63.0 0.75 2.64 .65 X 1.65270 301271U100GJ2 291 111 1.32 2.02 .77 X 1.65270 301R271U100GJ2 252 95.9 1.42 2.17 .77 X 1.65330 301331U100LQ2 249 55.0 0.81 2.94 .73 X 1.48330 301331U100JE2 273 109 1.42 2.11 1.02 X 1.15330 301R331U100JE2 237 92.3 1.52 2.30 1.02 X 1.15390 301391U100LV2 210 47.0 0.87 3.35 .73 X 1.63470 301471U100GL2 195 74.1 2.02 3.09 .77 X 2.15470 301R471U100GL2 169 64.3 2.17 3.32 .77 X 2.15470 301471U100HJ2 186 70.8 1.94 2.97 .895 X 1.65470 301R471U100HJ2 162 61.4 2.09 3.19 .895 X 1.65560 301561U100GP2 147 55.9 2.59 3.96 .77 X 2.65560 301R561U100GP2 128 48.5 2.78 4.26 .77 X 2.65680 301681U100GS2 119 45.0 3.15 4.82 .77 X 3.15680 301R681U100GS2 103 39.0 3.39 5.18 .77 X 3.15680 301681U100HL2 125 47.6 2.75 4.20 .895 X 2.15680 301R681U100HL2 104 39.4 3.02 4.62 .895 X 2.15680 301681U100JJ2 138 55.1 2.45 3.66 1.02 X 1.65680 301R681U100JJ2 119 46.5 2.64 3.98 1.02 X 1.65820 301821U100GT2 99.5 37.8 3.67 5.61 .77 X 3.65820 301R821U100GT2 86.2 32.8 3.94 6.02 .77 X 3.65

1000 301102U100HP2 94.7 36.0 3.51 5.38 .895 X 2.651000 301R102U100HP2 78.1 29.7 3.87 5.92 .895 X 2.651000 301102U100JL2 92.7 37.1 3.43 5.12 1.02 X 2.151000 301R102U100JL2 73.8 28.8 3.85 5.81 1.02 X 2.151200 301122U100HS2 76.5 29.1 4.26 6.52 .895 X 3.151200 301R122U100HS2 62.8 23.9 4.71 7.20 .895 X 3.151200 301122U100HT2 64.5 24.5 4.96 7.59 .895 X 3.651200 301R122U100HT2 52.6 20.0 5.50 8.41 .895 X 3.651200 301122U100JP2 70.3 28.1 4.38 6.53 1.02 X 2.651200 301R122U100JP2 55.7 21.7 4.92 7.43 1.02 X 2.651500 301152U100JS2 57.0 22.8 5.28 7.87 1.02 X 3.151500 301R152U100JS2 44.9 17.5 5.95 8.99 1.02 X 3.152200 301222U100JT2 48.3 19.3 6.17 9.19 1.02 X 3.652200 301R222U100JT2 37.7 14.7 6.97 10.5 1.02 X 3.65


15 301150U160EG2 17500 1450 0.12 0.40 .51 X .8522 301220U160EK2 12800 960 0.14 0.52 .51 X 1.0427 301270U160EM2 9700 720 0.18 0.66 .51 X 1.1039 301390U160EN2 6210 600 0.23 0.74 .51 X 1.3847 301470U160FK2 6000 620 0.23 0.70 .65 X 1.0456 301560U160ER2 5110 500 0.28 0.89 .51 X 1.7356 301560T160GE2 1817 690 0.48 0.73 .77 X 1.1568 301680U160FF2 3500 350 0.36 1.15 .65 X 1.3282 301820U160FQ2 2950 320 0.50 1.53 .65 X 1.4882 301820T160HE2 1169 444 0.66 1.00 .895 X 1.15

100 301101U160LQ2 2540 210 0.47 1.65 .73 X 1.48100 301101T160GJ2 1019 387 0.71 1.08 .77 X 1.65120 301121U160LV2 2010 190 0.55 1.79 .73 X 1.63120 301121T160JE2 904 362 0.78 1.16 1.02 X 1.15150 301151T160GL2 608 231 1.15 1.75 .77 X 2.15180 301181T160HJ2 586 222 1.10 1.68 .895 X 1.65220 301221T160GP2 457 174 1.47 2.25 .77 X 2.65270 301271T160GS2 366 139 1.79 2.74 .77 X 3.15270 301271T160HL2 391 149 1.55 2.38 .895 X 2.15270 301271T160JJ2 415 166 1.41 2.11 1.02 X 1.65330 301331T160GT2 306 116 2.09 3.20 .77 X 3.65390 301391T160HP2 268 102 2.09 3.19 .895 X 2.65390 301391T160JL2 278 111 1.98 2.95 1.02 X 2.15470 301471T160HS2 226 85.7 2.48 3.80 .895 X 3.15470 301471T160JP2 228 91.4 2.43 3.62 1.02 X 2.65560 301561T160HT2 189 71.8 2.90 4.44 .895 X 3.65560 301561T160JS2 184 73.5 2.94 4.39 1.02 X 3.15


160 Vdc (200 Vdc Surge) (Cont’d)

680 301681T160JT2 154 61.6 3.45 5.15 1.02 X 3.65


10 301100U200EG2 19900 1780 0.12 0.39 .51 X .8515 301150U200EK2 15200 1270 0.14 0.49 .51 X 1.0418 301180U200EM2 10600 960 0.19 0.63 .51 X 1.1022 301220U200EN2 7010 580 0.22 0.75 .51 X 1.3827 301270U200FK2 6500 650 0.22 0.68 .65 X 1.0433 301330U200ER2 5990 550 0.26 0.87 .51 X 1.7339 301390U200FF2 3910 340 0.34 1.15 .65 X 1.3247 301470U200FQ2 3730 330 0.45 1.50 .65 X 1.4856 301560U200FV2 3250 290 0.47 1.58 .65 X 1.6556 301560T200GE2 2285 1051 0.43 0.59 .77 X 1.1568 301680U200LQ2 2840 260 0.53 1.74 .73 X 1.4882 301820U200LV2 2310 180 0.53 1.89 .73 X 1.6382 301820T200HE2 1423 655 0.59 0.83 .895 X 1.15

100 301101T200GJ2 1144 526 0.67 0.93 .77 X 1.65120 301121T200JE2 1012 465 0.74 1.02 1.02 X 1.15150 301151T200GL2 763 351 1.02 1.42 .77 X 2.15180 301181T200HJ2 713 328 0.99 1.38 .895 X 1.65220 301221T200GP2 574 264 1.31 1.82 .77 X 2.65220 301221T200JJ2 507 233 1.28 1.78 1.02 X 1.65270 301271T200GS2 460 212 1.60 2.22 .77 X 3.15270 301271T200HL2 476 219 1.41 1.96 .895 X 2.15330 301331T200GT2 384 177 1.87 2.59 .77 X 3.65330 301331T200HP2 358 165 1.81 2.51 .895 X 2.65390 301391T200HS2 288 132 2.20 3.06 .895 X 3.15390 301391T200JL2 339 156 1.79 2.49 1.02 X 2.15470 301471T200HT2 240 111 2.57 3.57 .895 X 3.65470 301471T200JP2 255 117 2.30 3.19 1.02 X 2.65560 301561T200JS2 205 94.4 2.78 3.87 1.02 X 3.15680 301681T200JT2 172 79.1 3.27 4.54 1.02 X 3.65


8.2 3018R2U250EG2 29900 3050 0.073 0.23 .51 X .8512 301120U250EK2 23300 2500 0.088 0.27 .51 X 1.0415 301150U250EM2 15000 1900 0.14 0.38 .51 X 1.1018 301180U250EN2 12100 1500 0.17 0.47 .51 X 1.3827 301270U250FK2 10800 1610 0.20 0.53 .65 X 1.0427 301270U250ER2 7820 1390 0.28 0.67 .51 X 1.7333 301330U250FF2 5500 720 0.29 0.80 .65 X 1.3239 301390U250FQ2 5260 700 0.32 0.89 .65 X 1.4839 301390T250GE2 2708 1137 0.39 0.57 .77 X 1.1547 301470U250FV2 4680 670 0.38 1.00 .65 X 1.6556 301560U250LQ2 3750 550 0.42 1.10 .73 X 1.4868 301680U250LV2 3110 360 0.44 1.29 .73 X 1.6368 301680T250HE2 1684 707 0.55 0.79 .895 X 1.1582 301820T250GJ2 1355 569 0.61 0.89 .77 X 1.65

100 301101T250JE2 1194 502 0.68 0.99 1.02 X 1.15120 301121T250GL2 905 380 0.94 1.37 .77 X 2.15120 301121T250HJ2 843 354 0.91 1.33 .895 X 1.65150 301151T250GP2 679 285 1.21 1.75 .77 X 2.65180 301181T250JJ2 598 251 1.18 1.71 1.02 X 1.65220 301221T250GS2 544 229 1.47 2.14 .77 X 3.15220 301221T250HL2 563 237 1.30 1.88 .895 X 2.15270 301271T250GT2 455 191 1.72 2.50 .77 X 3.65270 301271T250HP2 423 178 1.66 2.42 .895 X 2.65270 301271T250JL2 400 168 1.65 2.40 1.02 X 2.15330 301331T250HS2 340 143 2.02 2.94 .895 X 3.15390 301391T250HT2 284 119 2.37 3.44 .895 X 3.65390 301391T250JP2 301 126 2.12 3.08 1.02 X 2.65470 301471T250JS2 242 102 2.56 3.73 1.02 X 3.15560 301561T250JT2 202 85.0 3.01 4.38 1.02 X 3.65


Aluminum



CORNELLDUBILIER



Rated Voltage: 6.3 to 250 VdcCapacitance: 270 µF to 33,000 µF

Capacitance Tolerance: 6.3 to 100 Vdc; 10 + 75%, 160 to 250 Vdc; 10 + 50%Leakage Current: 0.5 CV A, 4 mA max, 5 minutesCold Impedance: 55 C multiple of 25 C Z 4 for 6.3 & 7.5 V, 3 for 10 to 50 V, 2 for > 50 V


Frequency50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up



1.02” Diameter6.3 & 7.5 V 0.84 0.88 1.00 1.12 1.17 1.19 1.2010 to 40 V 0.81 0.86 1.00 1.15 1.22 1.25 1.2650V 0.76 0.81 1.00 1.23 1.35 1.42 1.4463 & 75 V 0.77 0.81 1.00 1.23 1.35 1.42 1.44100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46

Load Life: 10,000 h at full load at 85C Capacitance +20%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h at 105 °C, capacitance, ESR and DCL, initial requirements

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.66 1.52 1.37 1.20 1.00 0.75 0.36

Type 330, 55 C to 105 C Ultra-Long-Life, Switching Power Grade Radial

High Ripple and Ultra-Long LifeThe Type 330 is the ultra-long-life version of the Type 300capacitor. With an astonishing, 50,000-hour expected life operatingcontinuously at full load and 65 C the 330 is the choice for power-supply outputs and UPS battery stiffening. The exceptionally lowESRs enable high ripple-current capability. With series inductanceof 12 to 16 nH and ripple currents to 16 amps one of these capaci-tors can save by replacing three or four of the 12.5 mm diametercapacitors routinely at the output of switching power supplies.Type 330 R delivers even lower ESR and higher ripple. Type 330has three leads for rugged, reverse-proof mounting. Two leadsare available as Types 331 and 331R.

Highlights Expected Life > 20 years @ 45 C Ripple Current to 16 amps ESRs to 6 mΩ > 90% capacitance at -40C Replaces multiple capacitors

Low zType 350p 2.120MORE

Temp

Ripple

Type 325p 2.116

Type 325p 2.116

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER




330R 333 U 6R3 JS 2 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy330 - 3 leads 100=10 F M = 20% 6R3=6.3 Vdc See 0 = bare can (blank) =no epoxy330R - 3 leads 102=1000 F T = 10% + 50% 063=63 Vdc Rating 1 = polyester E = Epoxy endseal

Low ESR U = 10 + 75% 100=100 Vdc 2 = PVC331 - 2 leads 8 = PVC w/standoffs331R - 2 leads, Low ESR 9 = Polyester w/standoffs331A - Laydown 3 leads

Insulated Epoxy Bare Can Lead Spacing Lead DiameterCase D 0.015 (0.4 mm) endseal D 0.015 (0.4 mm) Type 330 Type 331 dia. AWGCode L 0.062 (1.6 mm) L Max L 0.030 (0.8 mm) S1 T S2

D x L D x L 0.020 (0.5 mm) 0.020 (0.5 mm)

Case Dimensions in InchesGT 0.765 x 3.650 3.712 0.750 x 3.625 0.200 0.300 0.300 0.040 18HP 0.890 x 2.650 2.712 0.875 x 2.625 0.300 0.400 0.300 0.040 18HS 0.890 x 3.150 3.212 0.875 x 3.125 0.300 0.400 0.300 0.040 18HT 0.890 x 3.650 3.712 0.875 x 3.625 0.300 0.400 0.300 0.040 18JL 1.015 x 2.150 2.212 1.000 x 2.125 0.300 0.400 0.400 0.040 18JP 1.015 x 2.650 2.712 1.000 x 2.625 0.300 0.400 0.400 0.040 18JS 1.015 x 3.150 3.212 1.000 x 3.125 0.300 0.400 0.400 0.040 18JT 1.015 x 3.650 3.712 1.000 x 3.625 0.300 0.400 0.400 0.040 18

Case Dimensions in MillimetersGT 19.4 x 92.7 94.3 19.1 x 92.1 5.08 7.62 7.62 1.02 18HP 22.6 x 67.3 68.9 22.2 x 66.7 7.62 10.16 7.62 1.02 18HS 22.6 x 80.0 81.6 22.2 x 79.4 7.62 10.16 7.62 1.02 18HT 22.6 X 92.7 94.3 22.2 X 92.1 7.62 10.16 7.62 1.02 18JL 25.8 x 54.6 56.2 25.4 x 54.0 7.62 10.16 10.16 1.02 18JP 25.8 x 67.3 68.9 25.4 x 66.7 7.62 10.16 10.16 1.02 18JS 25.8 x 80.0 81.6 25.4 x 79.4 7.62 10.16 10.16 1.02 18JT 25.8 x 92.7 94.3 25.4 x 92.1 7.62 10.16 10.16 1.02 18

330/330RThree Leads

331/331RTwo Leads

S2

Case Dimensions

Type 331A only, delete for Type 301

+

Outline Drawings

Aluminum



CORNELLDUBILIER



12000 330123U010HP2 28.7 16.6 6.39 7.91 0.895 X 2.6512000 330R123U010HP2 20.8 11.5 7.49 9.53 0.895 X 2.6512000 330123U010JL2 31.0 19.9 5.93 6.99 1.02 X 2.1512000 330R123U010JL2 20.3 11.4 7.33 9.23 1.02 X 2.1515000 330153U010HS2 23.7 13.7 7.66 9.49 0.895 X 3.1515000 330R153U010HS2 17.0 9.3 9.05 11.5 0.895 X 3.1518000 330183U010HT2 20.5 11.9 8.81 10.9 0.895 X 3.6518000 330R183U010HT2 14.5 8.0 10.5 13.3 0.895 X 3.6518000 330183U010JP2 24.1 15.4 7.48 8.81 1.02 X 2.6518000 330R183U010JP2 15.6 8.7 9.29 11.7 1.02 X 2.6522000 330223U010JS2 20.1 12.8 8.90 10.5 1.02 X 3.1522000 330R223U010JS2 16.1 9.0 9.94 12.5 1.02 X 3.1527000 330273U010JT2 17.5 11.2 10.3 12.1 1.02 X 3.6527000 330R273U010JT2 11.0 6.2 12.9 16.3 1.02 X 3.65


10000 330103U016GT2 29.2 14.9 6.77 8.94 0.77 X 3.6510000 330R103U016GT2 25.3 12.9 7.27 9.60 0.77 X 3.6510000 330103U016HP2 29.5 17.1 6.30 7.79 0.895 X 2.6510000 330R103U016HP2 21.6 11.9 7.36 9.36 0.895 X 2.6510000 330103U016JL2 31.8 19.7 5.86 7.01 1.02 X 2.1510000 330R103U016JL2 21.0 11.1 7.21 9.33 1.02 X 2.1512000 330123U016HS2 24.4 14.1 7.55 9.35 0.895 X 3.1512000 330R123U016HS2 17.6 9.7 8.89 11.3 0.895 X 3.1515000 330153U016HT2 21.1 12.2 8.69 10.8 0.895 X 3.6515000 330R153U016HT2 15.0 8.2 10.3 13.1 0.895 X 3.6515000 330153U016JP2 24.7 15.3 7.39 8.85 1.02 X 2.6515000 330R153U016JP2 16.1 8.5 9.14 11.8 1.02 X 2.6518000 330183U016JS2 20.5 12.7 8.80 10.5 1.02 X 3.1518000 330R183U016JS2 16.6 8.8 9.79 12.7 1.02 X 3.1522000 330223U016JT2 17.9 11.1 10.1 12.1 1.02 X 3.6522000 330R223U016JT2 11.4 6.0 12.7 16.5 1.02 X 3.65


8200 330822U020GT2 29.2 14.9 6.77 8.94 0.77 X 3.658200 330R822U020GT2 25.3 12.9 7.27 9.60 0.77 X 3.658200 330822U020HP2 29.5 16.5 6.30 7.93 0.895 X 2.65


RatingsMax. ESR Ripple Amps Nominal

Cap. Catalog mΩ @ 25 °C Max. @ 85 °C SizeF Number 120 Hz 20 kHz 120 Hz 20 kHz DxL (in)


15000 330153U6R3GT2 26.6 15.1 7.10 8.86 0.77 X 3.6515000 330R153U6R3GT2 23.0 13.1 7.62 9.52 0.77 X 3.6515000 330153U6R3HP2 27.1 16.5 6.57 7.93 0.895 X 2.6515000 330R153U6R3HP2 19.5 11.3 7.75 9.60 0.895 X 2.6518000 330183U6R3JL2 29.6 20.1 6.08 6.95 1.02 X 2.1518000 330R183U6R3JL2 19.1 10.9 7.57 9.45 1.02 X 2.1522000 330223U6R3HS2 22.4 13.7 7.88 9.51 0.895 X 3.1522000 330R223U6R3HS2 15.9 9.2 9.35 11.6 0.895 X 3.1522000 330223U6R3JP2 23.0 15.6 7.66 8.75 1.02 X 2.6522000 330R223U6R3JP2 14.7 8.4 9.59 12.0 1.02 X 2.6527000 330273U6R3HT2 19.4 11.9 9.04 10.9 0.895 X 3.6527000 330R273U6R3HT2 13.6 7.9 10.8 13.4 0.895 X 3.6527000 330273U6R3JS2 19.2 13.0 9.11 10.4 1.02 X 3.1527000 330R273U6R3JS2 15.1 8.6 10.3 12.8 1.02 X 3.1533000 330333U6R3JT2 16.7 11.4 10.5 12.0 1.02 X 3.6533000 330R333U6R3JT2 10.4 5.9 13.3 16.6 1.02 X 3.65


12000 330123U7R5GT2 27.2 15.0 7.01 8.91 0.77 X 3.6512000 330R123U7R5GT2 23.6 13.0 7.53 9.57 0.77 X 3.6515000 330153U7R5HP2 27.7 16.6 6.50 7.91 0.895 X 2.6515000 330R153U7R5HP2 20.0 11.0 7.65 9.73 0.895 X 2.6515000 330153U7R5JL2 30.1 19.9 6.02 6.99 1.02 X 2.1515000 330R153U7R5JL2 19.6 10.9 7.47 9.41 1.02 X 2.1518000 330183U7R5HS2 22.9 13.8 7.79 9.48 0.895 X 3.1518000 330R183U7R5HS2 16.3 9.0 9.23 11.74 0.895 X 3.1522000 330223U7R5HT2 19.8 11.9 8.95 10.89 0.895 X 3.6522000 330R223U7R5HT2 13.9 7.7 10.7 13.6 0.895 X 3.6522000 330223U7R5JP2 23.4 15.5 7.59 8.80 1.02 X 2.6522000 330R223U7R5JP2 15.0 8.4 9.47 11.9 1.02 X 2.6527000 330273U7R5JS2 19.5 12.9 9.03 10.5 1.02 X 3.1527000 330R273U7R5JS2 15.5 8.7 10.1 12.8 1.02 X 3.1533000 330333U7R5JT2 17.0 11.2 10.4 12.1 1.02 X 3.6533000 330R333U7R5JT2 10.6 5.9 13.1 16.6 1.02 X 3.65


12000 330123U010GT2 28.3 15.0 6.88 8.91 0.77 X 3.6512000 330R123U010GT2 24.5 13.0 7.39 9.57 0.77 X 3.65

Max. ESR Ripple Amps NominalCap. Catalog mΩ @ 25 °C Max. @ 85 °C SizeF Number 120 Hz 20 kHz 120 Hz 20 kHz DxL (in)

Typical Performance Curve

Alum

inum

Radi

al L

eade

dCa

paci

tors





CORNELLDUBILIER


Ratings


8200 330R822U020HP2 21.6 12.1 7.36 9.28 0.895 X 2.658200 330822U020JL2 31.8 20.1 5.86 6.96 1.02 X 2.158200 330R822U020JL2 21.0 11.1 7.21 9.33 1.02 X 2.15

10000 330103U020HS2 24.4 13.7 7.55 9.52 0.895 X 3.1510000 330R103U020HS2 17.6 9.8 8.89 11.2 0.895 X 3.1512000 330123U020HT2 21.1 11.8 8.69 10.9 0.895 X 3.6512000 330R123U020HT2 15.0 8.4 10.3 13.0 0.895 X 3.6512000 330123U020JP2 24.7 15.6 7.39 8.77 1.02 X 2.6512000 330R123U020JP2 16.1 8.5 9.14 11.8 1.02 X 2.6515000 330153U020JS2 20.5 12.9 8.80 10.5 1.02 X 3.1515000 330R153U020JS2 13.2 7.0 11.0 14.2 1.02 X 3.1518000 330183U020JT2 17.9 11.2 10.1 12.0 1.02 X 3.6518000 330R183U020JT2 11.4 6.0 12.7 16.5 1.02 X 3.65


6800 330682U025GT2 31.2 15.0 6.55 8.91 0.77 X 3.656800 330R682U025GT2 27.0 13.0 7.04 9.58 0.77 X 3.656800 330682U025HP2 31.3 16.6 6.11 7.91 0.895 X 2.656800 330R682U025HP2 23.1 10.9 7.11 9.77 0.895 X 2.656800 330682U025JL2 33.5 20.1 5.71 6.94 1.02 X 2.156800 330R682U025JL2 22.5 11.3 6.96 9.29 1.02 X 2.158200 330822U025HS2 25.8 13.7 7.34 9.50 0.895 X 3.158200 330R822U025HS2 18.9 8.9 8.59 11.8 0.895 X 3.15

10000 330103U025HT2 22.3 11.8 8.45 10.9 0.895 X 3.6510000 330R103U025HT2 16.0 7.5 9.96 13.7 0.895 X 3.6510000 330103U025JP2 26.0 15.6 7.20 8.77 1.02 X 2.6510000 330R103U025JP2 17.2 8.6 8.84 11.8 1.02 X 2.6512000 330123U025JS2 21.6 12.9 8.59 10.5 1.02 X 3.1512000 330R123U025JS2 14.1 7.1 10.6 14.1 1.02 X 3.1515000 330153U025JT2 18.7 11.2 9.90 12.1 1.02 X 3.6515000 330R153U025JT2 12.1 6.0 12.3 16.4 1.02 X 3.65


4700 330472U040GT2 36.4 16.4 6.06 8.52 0.77 X 3.654700 330R472U040GT2 31.6 14.2 6.51 9.15 0.77 X 3.654700 330472U040HP2 36.2 17.4 5.68 7.73 0.895 X 2.654700 330R472U040HP2 27.4 12.0 6.54 9.29 0.895 X 2.654700 330472U040JL2 38.1 20.9 5.35 6.81 1.02 X 2.154700 330R472U040JL2 26.5 12.2 6.42 8.93 1.02 X 2.155600 330562U040HS2 29.7 14.3 6.84 9.31 0.895 X 3.155600 330R562U040HS2 22.2 9.8 7.91 11.2 0.895 X 3.156800 330682U040HT2 25.5 12.3 7.89 10.7 0.895 X 3.656800 330R682U040HT2 18.9 8.3 9.18 13.1 0.895 X 3.656800 330682U040JP2 29.4 16.2 6.77 8.61 1.02 X 2.656800 330R682U040JP2 20.2 9.3 8.17 11.4 1.02 X 2.658200 330822U040JS2 24.3 13.4 8.09 10.3 1.02 X 3.158200 330R822U040JS2 16.5 7.6 9.82 13.6 1.02 X 3.15

10000 330103U040JT2 21.0 11.5 9.35 11.9 1.02 X 3.6510000 330R103U040JT2 14.1 6.5 11.4 15.9 1.02 X 3.65


3300 330332U050GT2 44.3 16.4 5.49 8.52 0.77 X 3.653300 330R332U050GT2 38.4 14.2 5.90 9.15 0.77 X 3.653300 330332U050HP2 43.5 17.8 5.18 7.63 0.895 X 2.653300 330R332U050HP2 33.7 12.1 5.89 9.26 0.895 X 2.653900 330392U050JL2 44.9 21.6 4.93 6.71 1.02 X 2.15



3900 330R392U050JL2 32.4 12.6 5.81 8.77 1.02 X 2.154700 330472U050HS2 35.6 14.6 6.25 9.21 0.895 X 3.154700 330R472U050HS2 27.3 9.8 7.14 11.2 0.895 X 3.155600 330562U050HT2 30.4 12.5 7.23 10.6 0.895 X 3.655600 330R562U050HT2 23.1 8.3 8.30 13.0 0.895 X 3.655600 330562U050JP2 34.5 16.6 6.25 8.50 1.02 X 2.655600 330R562U050JP2 24.6 9.6 7.40 11.2 1.02 X 2.656800 330682U050JS2 28.4 13.6 7.48 10.2 1.02 X 3.156800 330R682U050JS2 20.0 7.8 8.91 13.4 1.02 X 3.158200 330822U050JT2 24.4 11.7 8.67 11.8 1.02 X 3.658200 330R822U050JT2 17.0 6.6 10.4 15.7 1.02 X 3.65






820 330821U100GT2 99.5 37.8 3.67 5.61 0.77 X 3.65820 330R821U100GT2 86.2 32.8 3.94 6.02 0.77 X 3.65

1000 330102U100HP2 94.7 36.0 3.51 5.38 0.895 X 2.651000 330R102U100HP2 78.1 29.7 3.87 5.92 0.895 X 2.651000 330102U100JL2 92.7 37.1 3.43 5.12 1.02 X 2.151000 330R102U100JL2 73.8 28.8 3.85 5.81 1.02 X 2.151200 330122U100HS2 76.5 29.1 4.26 6.52 0.895 X 3.15


Aluminum




CORNELLDUBILIER


Ratings


1200 330R122U100HS2 62.8 23.9 4.71 7.20 0.895 X 3.151200 330122U100HT2 64.5 24.5 4.96 7.59 0.895 X 3.651200 330R122U100HT2 52.6 20.0 5.50 8.41 0.895 X 3.651200 330122U100JP2 70.3 28.1 4.38 6.53 1.02 X 2.651200 330R122U100JP2 55.7 21.7 4.92 7.43 1.02 X 2.651500 330152U100JS2 57.0 22.8 5.28 7.87 1.02 X 3.151500 330R152U100JS2 44.9 17.5 5.95 8.99 1.02 X 3.152200 330222U100JT2 48.3 19.3 6.17 9.19 1.02 X 3.652200 330R222U100JT2 37.7 14.7 6.97 10.5 1.02 X 3.65


330 330331T160GT2 306 116 2.09 3.20 0.77 X 3.65390 330391T160HP2 268 102 2.09 3.19 0.895 X 2.65390 330391T160JL2 278 111 1.98 2.95 1.02 X 2.15470 330471T160HS2 226 85.7 2.48 3.80 0.895 X 3.15470 330471T160JP2 228 91.4 2.43 3.62 1.02 X 2.65560 330561T160HT2 189 71.8 2.90 4.44 0.895 X 3.65560 330561T160JS2 184 73.5 2.94 4.39 1.02 X 3.15680 330681T160JT2 154 61.6 3.45 5.15 1.02 X 3.65


330 330331T200GT2 384 177 1.87 2.59 0.77 X 3.65330 330331T200HP2 358 165 1.81 2.51 0.895 X 2.65390 330391T200HS2 288 132 2.20 3.06 0.895 X 3.15390 330391T200JL2 339 156 1.79 2.49 1.02 X 2.15470 330471T200HT2 240 111 2.57 3.57 0.895 X 3.65470 330471T200JP2 255 117 2.30 3.19 1.02 X 2.65560 330561T200JS2 205 94.4 2.78 3.87 1.02 X 3.15680 330681T200JT2 172 79.1 3.27 4.54 1.02 X 3.65


270 330271T250GT2 455 191 1.72 2.50 0.77 X 3.65270 330271T250HP2 423 178 1.66 2.42 0.895 X 2.65270 330271T250JL2 400 168 1.65 2.40 1.02 X 2.15330 330331T250HS2 340 143 2.02 2.94 0.895 X 3.15390 330391T250HT2 284 119 2.37 3.44 0.895 X 3.65390 330391T250JP2 301 126 2.12 3.08 1.02 X 2.65470 330471T250JS2 242 102 2.56 3.73 1.02 X 3.15560 330561T250JT2 202 85.0 3.01 4.38 1.02 X 3.65





Type 325/326, –55 °C to 125 °C Long-Life, Switching Power Grade Radial

CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors

High Temperature and Ultra-Low ESRThe Types 325 and 326 are the ultra-wide-temperature, low-ESRcapacitors for switching power-supply outputs and automotive appli-cations. The 125 °C capability and exceptionally low ESRs enablehigh ripple-current capability. With series inductance of 12 to 16 nHand ripple currents to 27 amps one of these capacitors can save byreplacing eight to ten of the 12.5 mm diameter capacitors routinely atthe output of switching power supplies. Type 325 has three leads forrugged, reverse-proof mounting, and Type 326 has two leads.

Highlights ———————————————• 2000 hour life test at 125 °C• Ripple Current to 27 amps • ESRs to 5 mΩ• > 90% capacitance at –40 °C• Replaces multiple capacitors

Outline Drawings ————————————————————————————————

Specifications —————————————————————————————————Operating Temperature: –55 °C to 125 °C

Rated voltage: 6.3 to 35 VdcCapacitance: 880 µF to 46,000 µF

Capacitance Tolerance: –10 +75%Leakage Current: ≤ 0.5 √–CV µA, 4 mA max, 5 minutesCold Impedance: –55 °C multiple of 25 °C Z ≤ 2.5 @ 120 Hz

≤ 20 from 20–100 kHzRipple Current Multipliers: Ambient Temperature

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C 115 °C 125 °C1.39 1.30 1.21 1.11 1.00 0.88 0.73 0.55 0.26

Frequency120 Hz 360 Hz 400 Hz 1 kHz 20–100 kHz

see ratings 0.76 0.77 0.85 1.00

Life Test: 2000 h with rated voltage at 125 °C capacitance ± 10%ESR 125 % of limitDCL 100 % of limit

Load Life: 4000 h at full load at 85 °C capacitance ± 10%ESR 200 % of limitDCL 100 % of limit


Type 325Three Leads

Type 326Two Leads

Type 325 Type 326

Third LeadType 326A



CORNELLDUBILIER


Aluminum


Insulated Epoxy Bare Can Lead Spacing Lead DiameterCase D 0.015 (0.4 mm) endseal D 0.015 (0.4 mm) Type 325 Type 326 dia. AWGCode L 0.062 (1.6 mm) L Max L 0.030 (0.8 mm) S1 T S2

D x L D x L 0.020 (0.5 mm) 0.020 (0.5 mm)

Case Dimensions in InchesGE .765 x 1.150 1.212 0.750 x 1.125 0.200 0.300 0.300 0.040 18GJ .765 x 1.650 1.712 0.750 x 1.625 0.200 0.300 0.300 0.040 18GL .765 x 2.150 2.212 0.750 x 2.125 0.200 0.300 0.300 0.040 18GP .765 x 2.650 2.712 0.750 x 2.625 0.200 0.300 0.300 0.040 18GS .765 x 3.150 3.212 0.750 x 3.125 0.200 0.300 0.300 0.040 18GT .765 x 3.650 3.712 0.750 x 3.625 0.200 0.300 0.300 0.040 18HE .890 x 1.150 1.212 0.875 x 1.125 0.300 0.400 0.300 0.040 18HJ .890 x 1.650 1.712 0.875 x 1.625 0.300 0.400 0.300 0.040 18HL .890 x 2.150 2.212 0.875 x 2.125 0.300 0.400 0.300 0.040 18HP .890 x 2.650 2.712 0.875 x 2.625 0.300 0.400 0.300 0.040 18HS .890 x 3.150 3.212 0.875 x 3.125 0.300 0.400 0.300 0.040 18HT .890 x 3.650 3.712 0.875 x 3.625 0.300 0.400 0.300 0.040 18JE 1.015 x 1.150 1.212 1.000 x 1.125 0.300 0.400 0.400 0.040 18JJ 1.015 x 1.650 1.712 1.000 x 1.625 0.300 0.400 0.400 0.040 18JL 1.015 x 2.150 2.212 1.000 x 2.125 0.300 0.400 0.400 0.040 18JP 1.015 x 2.650 2.712 1.000 x 2.625 0.300 0.400 0.400 0.040 18JS 1.015 x 3.150 3.212 1.000 x 3.125 0.300 0.400 0.400 0.040 18JT 1.015 x 3.650 3.712 1.000 x 3.625 0.300 0.400 0.400 0.040 18

Case Dimensions in MillimetersGE 19.4 x 29.2 30.8 19.1 x 28.6 5.08 7.62 7.62 1.02 18GJ 19.4 x 41.9 43.5 19.1 x 41.3 5.08 7.62 7.62 1.02 18GL 19.4 x 54.6 56.2 19.1 x 54.0 5.08 7.62 7.62 1.02 18GP 19.4 x 67.3 68.9 19.1 x 66.7 5.08 7.62 7.62 1.02 18GS 19.4 x 80.0 81.6 19.1 x 79.4 5.08 7.62 7.62 1.02 18GT 19.4 x 92.7 94.3 19.1 x 92.1 5.08 7.62 7.62 1.02 18HE 22.6 x 29.2 30.8 22.2 x 28.6 7.62 10.16 7.62 1.02 18HJ 22.6 x 41.9 43.5 22.2 x 41.3 7.62 10.16 7.62 1.02 18HL 22.6 x 54.6 56.2 22.2 x 54.0 7.62 10.16 7.62 1.02 18HP 22.6 x 67.3 68.9 22.2 x 66.7 7.62 10.16 7.62 1.02 18HS 22.6 x 80.0 81.6 22.2 x 79.4 7.62 10.16 7.62 1.02 18HT 22.6 x 92.7 94.3 22.2 x 92.1 7.62 10.16 7.62 1.02 18JE 25.8 x 29.2 30.8 25.4 x 28.6 7.62 10.16 10.16 1.02 18JJ 25.8 x 41.9 43.5 25.4 x 41.3 7.62 10.16 10.16 1.02 18HL 25.8 x 54.6 56.2 25.4 x 54.0 7.62 10.16 10.16 1.02 18JP 25.8 x 67.3 68.9 25.4 x 66.7 7.62 10.16 10.16 1.02 18JS 25.8 x 80.0 81.6 25.4 x 79.4 7.62 10.16 10.16 1.02 18JT 25.8 x 92.7 94.3 25.4 x 92.1 7.62 10.16 10.16 1.02 18


325 393 U 6R3 JS 1 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy325 - 3 leads 152=1500 F M = 20% 6R3=6.3 V See 0 = bare can (blank) =no epoxy326 - 2 leads 393=39000 F T = 10% + 50% 035=35 V Ratings 1 = polyester E = Epoxy endseal326A - 3 leads, laydown U = 10% + 75%





CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors

Typical Performance CurvesType 325 Capacitance vs Temperature & Frequency, 10000 µF, 16 V

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

125°C25°C

85°C

0°C

–55°C

–40°C

105°C

20°C–

Type 325 ESR vs Temperature and Frequency, 10000 µF, 16 V

0.1

1

10

100

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

40°C

20°C

0°C25°C105°C

85°C

125°C

55°C–

–

–

Type 325 Impedance vs Temperature and Frequency, 10000 µF, 16 V

0.01

0.1

1

10

100

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

–40°C

0°C25°C105°C85°C

125° –20°C

–55°C

Type 325 Capacitance vs Temperature & Frequency, 5600 µF, 25 V

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

125°C25°C

85°C

0°C

–55°C

–40°C

105°C

–20°C


0.1

1

10

100

10 100 1000 10000 100000Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

40°C

20°C

0°C25°C

105°C 85°C125°C

55°C–

–

–


0.01

0.1

1

10

100

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

40°C

0°C

25°C

105°C

85°C

125°

–20°C

–55°C

–

Type 325 Capacitance vs Temperature & Frequency, 3900 µF, 35 V

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

125°C25°C85°C

0°C

–55°C

–40°C

105°C

20°C–


0.1

1

10

100

10 100 1000 10000 100000Frequency (Hz)

Rat

io t

o 25

°C, 1

20 H

z V

alue

40°C

20°C

0°C25°C

105°C85°C

125°C

–55°C

–

–

8400 325842U016HL1 22.1 11.0 9.61 13.60 0.89 X 2.159600 325962U016GT1 24.8 10.1 10.41 16.28 0.77 X 3.65

11000 325113U016HP1 17.2 8.6 11.87 16.81 0.89 X 2.6512000 325123U016JL1 17.2 8.7 11.74 16.51 1.02 X 2.1514000 325143U016HS1 14.3 7.4 14.05 19.48 0.89 X 3.1515000 325153U016JP1 13.3 7.3 14.55 19.61 1.02 X 2.6517000 325173U016HT1 14.9 6.2 14.59 22.60 0.89 X 3.6519000 325193U016JS1 11.4 6.3 16.92 22.89 1.02 X 3.1523000 325233U016JT1 9.5 5.2 19.82 26.70 1.02 X 3.65

25 Vdc (32 Vdc Surge)1300 325132U025GE1 109 35.0 3.07 5.41 0.77 X 1.151800 325182U025HE1 70.8 26.0 4.17 6.89 0.89 X 1.152100 325212U025GJ1 55.1 23.5 4.96 7.59 0.77 X 1.652500 325252U025JE1 52.5 17.2 5.27 9.22 1.02 X 1.153100 325312U025GL1 38.0 16.2 6.66 10.21 0.77 X 2.153600 325362U025HJ1 35.0 14.7 6.80 10.51 0.89 X 1.654100 325412U025GP1 28.6 13.6 8.42 12.21 0.77 X 2.654900 325492U025JJ1 26.6 11.1 8.49 13.13 1.02 X 1.655100 325512U025GS1 24.8 11.6 9.76 14.23 0.77 X 3.155400 325542U025HL1 24.0 11.0 9.22 13.60 0.89 X 2.156200 325622U025GT1 24.8 10.1 10.41 16.28 0.77 X 3.657200 325722U025HP1 19.1 8.6 11.26 16.81 0.89 X 2.657400 325742U025JL1 19.1 8.7 11.13 16.51 1.02 X 2.158900 325892U025HS1 15.2 7.4 13.60 19.48 0.89 X 3.159800 325982U025JP1 15.3 7.3 13.60 19.61 1.02 X 2.65

11000 325113U025HT1 14.9 6.2 14.59 22.60 0.89 X 3.6512000 325123U025JS1 12.4 6.3 16.27 22.89 1.02 X 3.1515000 325153U025JT1 9.5 5.2 19.82 26.70 1.02 X 3.65

35 Vdc (44 Vdc Surge)880 325881U035GE1 124 35.0 2.88 5.41 0.77 X 1.15

1100 325112U035HE1 85.6 26.0 3.79 6.89 0.89 X 1.151500 325152U035GJ1 66.6 23.5 4.51 7.59 0.77 X 1.651700 325172U035JE1 63.8 17.2 4.78 9.22 1.02 X 1.152200 325222U035HJ1 42.8 14.7 6.15 10.51 0.89 X 1.652200 325222U035GL1 45.7 16.2 6.08 10.21 0.77 X 2.153000 325302U035GP1 35.2 13.6 7.59 12.21 0.77 X 2.653300 325332U035HL1 29.7 11.0 8.28 13.60 0.89 X 2.153400 325342U035JJ1 32.4 11.1 7.70 13.13 1.02 X 1.653700 325372U035GS1 28.6 11.6 9.09 14.23 0.77 X 3.154300 325432U035GT1 24.8 10.1 10.41 16.28 0.77 X 3.654400 325442U035HP1 22.9 8.6 10.28 16.81 0.89 X 2.655100 325512U035JL1 21.9 8.7 10.39 16.51 1.02 X 2.155500 325552U035HS1 18.1 7.4 12.47 19.48 0.89 X 3.156300 325632U035HT1 14.9 6.2 14.59 22.60 0.89 X 3.656800 325682U035JP1 17.1 7.3 12.83 19.61 1.02 X 2.658500 325852U035JS1 14.3 6.3 15.15 22.89 1.02 X 3.15

10000 325103U035JT1 12.4 5.2 17.37 26.70 1.02 X 3.65

6.3 Vdc (8 Vdc Surge)4400 325442U6R3GE1 65.7 36.2 3.95 5.31 0.77 X 1.155800 325582U6R3HE1 42.8 26.0 5.37 6.89 0.89 X 1.157100 325712U6R3GJ1 41.9 23.5 5.68 7.59 0.77 X 1.657700 325772U6R3JE1 28.5 17.2 7.16 9.22 1.02 X 1.15

11000 325113U6R3GL1 29.5 16.2 7.56 10.21 0.77 X 2.1512000 325123U6R3HJ1 26.5 14.7 7.81 10.51 0.89 X 1.6514000 325143U6R3GP1 20.9 13.6 9.85 12.21 0.77 X 2.6515000 325153U6R3JJ1 16.2 11.1 10.88 13.13 1.02 X 1.6517000 325173U6R3HL1 18.7 11.0 10.46 13.60 0.89 X 2.1518000 325183U6R3GS1 18.1 11.6 11.42 14.23 0.77 X 3.1521000 325213U6R3GT1 16.5 10.6 12.75 15.94 0.77 X 3.6523000 325233U6R3HP1 14.3 8.6 13.02 16.81 0.89 X 2.6523000 325233U6R3JL1 14.3 8.7 12.86 16.51 1.02 X 2.1529000 325293U6R3HS1 10.5 7.4 16.40 19.48 0.89 X 3.1531000 325313U6R3JP1 10.5 7.3 16.40 19.61 1.02 X 2.6535000 325353U6R3HT1 10.1 6.2 17.75 22.70 0.89 X 3.6539000 325393U6R3JS1 9.5 6.3 18.55 22.89 1.02 X 3.1546000 325463U6R3JT1 8.3 5.2 21.23 26.70 1.02 X 3.65

10 Vdc (13 Vdc Surge)3300 325332U010GE1 75.5 36.2 3.68 5.31 0.77 X 1.154700 325472U010HE1 42.8 26.0 5.37 6.89 0.89 X 1.155400 325542U010GJ1 42.7 23.5 5.63 7.59 0.77 X 1.656400 325642U010JE1 36.7 17.2 6.30 9.22 1.02 X 1.158000 325802U010GL1 31.4 16.2 7.33 10.21 0.77 X 2.159300 325932U010HJ1 25.7 14.7 7.95 10.51 0.89 X 1.65

11000 325113U010GP1 20.9 13.6 9.85 12.21 0.77 X 2.6513000 325133U010GS1 19.0 11.6 11.13 14.23 0.77 X 3.1513000 325133U010JJ1 22.9 11.1 9.16 13.13 1.02 X 1.6514000 325143U010HL1 17.3 11.0 10.86 13.60 0.89 X 2.1516000 325163U010GT1 17.0 10.4 12.57 16.08 0.77 X 3.6519000 325193U010HP1 14.2 8.6 13.04 16.81 0.89 X 2.6519000 325193U010JL1 16.2 8.7 12.10 16.51 1.02 X 2.1523000 325233U010HS1 11.4 7.4 15.73 19.48 0.89 X 3.1526000 325263U010JP1 11.4 7.3 15.73 19.61 1.02 X 2.6528000 325283U010HT1 10.1 6.2 17.75 22.70 0.89 X 3.632000 325323U010JS1 10.5 6.3 17.69 22.89 1.02 X 3.1538000 325383U010JT1 8.7 5.2 20.67 26.70 1.02 X 3.65

16 Vdc (20 Vdc Surge)2000 325202U016GE1 92.6 35.0 3.33 5.41 0.77 X 1.152800 325282U016HE1 63.8 26.0 4.40 6.89 0.89 X 1.153200 325322U016GJ1 50.4 23.5 5.18 7.59 0.77 X 1.653800 325382U016JE1 48.6 17.2 5.48 9.22 1.02 X 1.154800 325482U016GL1 35.3 16.2 6.92 10.21 0.77 X 2.155600 325562U016HJ1 32.2 14.7 7.09 10.51 0.89 X 1.656400 325642U016GP1 26.6 13.6 8.73 12.21 0.77 X 2.657700 325772U016JJ1 24.8 11.1 8.79 13.13 1.02 X 1.658000 325802U016GS1 22.8 11.6 10.17 14.23 0.77 X 3.15



CORNELLDUBILIER


Aluminum



ESR Max Ripple Max Nom Size@ 25 °C @ 85 °C Insulated

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D xLF Number (mΩ) (mΩ) (in)

ESR Max Ripple Max Nom Size@ 25 °C @ 85 °C Insulated

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D xLF Number (mΩ) (mΩ) (in)

Ratings


0.01

0.1

1

10

100

10 100 1000 10000 100000

Rat

io t

o 25

°C, 1

20 H

z V

alue

40°C

0°C

25°C

105°C

85°C

125°C

–20°C

55°C

–

–

Type 325/326 Operating Life vs Ripple Current

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5Rated Ripple-Current Multiple

Exp

ecte

d O

pera

ting

Lif

e, k

h

45°C

55°C

65°C

75°C

85°C

95°C

105°C

125°C

115°C

Alum

inum

Radi

al L

eade

dCa

paci

tors

Type 350, 105 °C, Low Inductance, High Frequency, Radial, Aluminum




CORNELLDUBILIER



Rated Voltage: 6.3 to 100 VdcCapacitance: 90 to 11,000 F, 10 + 75%

Shelf Life: 500 hours @ +105 °CLeakage Current: 0.5 CV A at 25 CCold Impedance: 55 C multiple of 25 C Z

6 for 6.3 V, 3 for 10 to 50 V, 2 for 75 & 100 VRipple Current Multipliers: Ambient Temperature

Frequency

60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up6.3 to 20 V 0.53 0.65 0.73 0.90 0.95 1.0025 to 35 V 0.45 0.55 0.65 0.85 0.92 1.0050 to 75 V 0.36 0.50 0.60 0.80 0.90 1.00100 V 0.29 0.40 0.52 0.75 0.87 1.00

Load Life: 4,000 h @ +105 °C at full load Capacitance 10%ESR 150% of limitDCL 100% of limit

Shelf Life: 500 h @ 105 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane.

45 °C 55 °C 65 °C 75 °C 85 °C 95 C 105 C1.66 1.52 1.37 1.20 1.00 0.75 0.36

Low-Inductance, Solid Aluminum Top

Type 350’s solid aluminum top assures extremely lowimpedance. With a typical 4 to 6nH ESL, the self resonantfrequency is well above 100 kHz. The very low ESR assuresthe low impedance rating. The capacitors are fitted withthree rugged welded mounting leads to provide maximumresistance to shock and vibration.

Highlights Operates to beyond 200 kHz Less than 10 nH ESL Solid aluminum top

0.062 0.031

Outline Drawings

ripple

Type 330p 2.111

Type 325p 2.116

life

MORE

+

Aluminum



350 JP 1152 U 6R3 C

Type Case Code Capacitance Tolerance Voltage Insulation900 = 90 F U = 10 +75% 6R3 = 6.3 Vdc 0 = bare can161 = 160 F T = 10 +50% 063 = 63 Vdc B = plastic insulation with epoxy882 = 8800 F 100 = 100 Vdc C = plastic insulation, no epoxy

1152 = 11500 F



CORNELLDUBILIER



InchesNominal Insulated S1 S2 T

D x L D x L 0.015 0.015

GE 3/4 x 1 1/8 0.775 x 1.157 .200 .100 .300GJ 3/4 x 1 5/8 0.775 x 1.657 .200 .100 .300GL 3/4 x 2 1/8 0.775 x 2.157 .200 .100 .300GP 3/4 x 2 5/8 0.775 x 2.657 .200 .100 .300HE 7/8 x 1 1/8 0.900 x 1.157 .300 .150 .400HJ 7/8 x 1 5/8 0.900 x 1.657 .300 .150 .400HL 7/8 x 2 1/8 0.900 x 2.157 .300 .150 .400HP 7/8 x 2 5/8 0.900 x 2.657 .300 .150 .400JJ 1 x 1 5/8 1.025 x 1.657 .300 .150 .400JL 1 x 2 1/8 1.025 x 2.157 .300 .150 .400JP 1 x 2 5/8 1.025 x 2.657 .300 .150 .400

Case Dimensions

Type 350 Impedance vs FrequencyESR vs. Temperature Characteristics (10 kHz)

CaseCode

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER




Ratings

6.3 Vdc (8.5 Vdc Surge)1600 350GE162U6R3C 0.087 0.043 0.040 3.2 3/4 x 1 1/82400 350HE242U6R3C 0.065 0.035 0.034 3.7 7/8 x 1 1/83000 350GJ302U6R3C 0.050 0.025 0.025 4.6 3/4 x 1 5/83400 350JE342U6R3C 0.058 0.031 0.031 4.0 1 x 1 1/84200 350GL422U6R3C 0.035 0.018 0.019 6.6 3/4 x 2 1/84400 350HJ442U6R3C 0.037 0.020 0.022 5.6 7/8 x 1 5/85400 350GP542U6R3C 0.029 0.015 0.017 8.0 3/4 x 2 5/86100 350JJ612U6R3C 0.033 0.018 0.020 6.2 1 x 1 5/86300 350HL632U6R3C 0.027 0.015 0.018 7.5 7/8 x 2 1/88300 350HP832U6R3C 0.022 0.013 0.016 8.8 7/8 x 2 5/88800 350JL882U6R3C 0.024 0.014 0.016 8.1 1 x 2 1/8

11000 350JP113U6R3C 0.020 0.012 0.015 9.6 1 x 2 5/8


1500 350GE152U7R5C 0.091 0.044 0.040 3.2 3/4 x 1 1/82300 350HE232U7R5C 0.068 0.035 0.034 3.7 7/8 x 1 1/82700 350GJ272U7R5C 0.052 0.026 0.025 4.6 3/4 x 1 5/83200 350JE322U7R5C 0.059 0.031 0.030 3.9 1 x 1 1/83900 350GL392U7R5C 0.037 0.018 0.019 6.6 3/4 x 2 1/84200 350HJ422U7R5C 0.039 0.021 0.022 5.6 7/8 x 1 5/85100 350GP512U7R5C 0.030 0.015 0.016 7.9 3/4 x 2 5/85800 350JJ582U7R5C 0.034 0.018 0.019 6.1 1 x 1 5/86000 350HL602U7R5C 0.028 0.015 0.018 7.4 7/8 x 2 1/87900 350HP792U7R5C 0.023 0.013 0.016 8.8 7/8 x 2 5/88400 350JL842U7R3C 0.025 0.014 0.016 8.0 1 x 2 1/8

11000 350JP113U7R5C 0.020 0.012 0.014 9.5 1 x 2 5/8


1400 350GE142U010C 0.098 0.045 0.040 3.1 3/4 x 1 1/82100 350HE212U010C 0.072 0.035 0.034 3.6 7/8 x 1 1/82600 350GJ262U010C 0.055 0.026 0.025 4.5 3/4 x 1 5/83000 350JE302U010C 0.062 0.032 0.030 3.6 1 x 1 1/83800 350GL382U010C 0.039 0.019 0.019 6.5 3/4 x 2 1/83900 350HJ392U010C 0.041 0.021 0.022 5.5 7/8 x 1 5/84800 350GP482U010C 0.031 0.015 0.016 7.8 3/4 x 2 5/85400 350JJ542U010C 0.036 0.019 0.020 5.7 1 x 1 5/8

ESR Max. Ω Imped. Ripple NomCap. Catalog +25 °C Ω +25 °C A + 85 °C Size (in)F Number 120 Hz 20 kHz 100 kHz 20 kHz D X L


5600 350HL562U010C 0.030 0.015 0.018 7.3 7/8 x 2 1/87300 350HP732U010C 0.024 0.013 0.016 8.7 7/8 x 2 5/87800 350JL782U010C 0.026 0.014 0.016 7.5 1 x 2 1/8

10000 350JP103U010C 0.021 0.012 0.015 9.0 1 x 2 5/8


1100 350GE112U012C 0.108 0.046 0.042 3.1 3/4 x 1 1/81700 350HE172U012C 0.079 0.036 0.034 3.6 7/8 x 1 1/82000 350GJ202U012C 0.061 0.027 0.025 4.4 3/4 x 1 5/82400 350JE242U012C 0.067 0.032 0.031 3.8 1 x 1 1/82900 350GL292U012C 0.044 0.019 0.020 6.4 3/4 x 2 1/83000 350HJ302U012C 0.045 0.021 0.022 5.4 7/8 x 1 5/83700 350GP372U012C 0.035 0.016 0.017 7.7 3/4 x 2 5/84200 350JJ422U012C 0.038 0.029 0.020 6.0 1 x 1 5/84400 350HL442U012C 0.032 0.016 0.018 7.2 7/8 x 2 1/85800 350HP582U012C 0.026 0.013 0.016 8.6 7/8 x 2 5/86100 350JL612U012C 0.028 0.014 0.016 7.8 1 x 2 1/88000 350JP802U012C 0.023 0.012 0.015 9.3 1 x 2 5/8


950 350GE951U016C 0.116 0.047 0.042 3.0 3/4 x 1 1/81500 350HE152U016C 0.085 0.037 0.035 3.5 7/8 x 1 1/81700 350GJ172U016C 0.066 0.027 0.025 4.3 3/4 x 1 5/82000 350JE202U016C 0.071 0.033 0.031 3.7 1 x 1 1/82500 350GL252U016C 0.047 0.020 0.020 6.3 3/4 x 2 1/82600 350HJ262U016C 0.048 0.022 0.022 5.3 7/8 x 1 5/83200 350GP322U016C 0.037 0.016 0.017 7.6 3/4 x 2 5/83600 350JJ362U016C 0.041 0.019 0.02 5.9 1 x 1 5/83800 350HL382U016C 0.034 0.016 0.018 7.1 7/8 x 2 1/84900 350HP492U016C 0.028 0.013 0.016 8.4 7/8 x 2 5/85200 350JL522U016C 0.029 0.014 0.016 7.7 1 x 2 1/86800 350JP682U016C 0.024 0.012 0.015 9.2 1 x 2 5/8


800 350GE801U020C 0.125 0.048 0.042 3.0 3/4 x 1 1/81200 350HE122U020C 0.089 0.038 0.035 3.5 7/8 x 1 1/81500 350GJ152U020C 0.070 0.028 0.026 4.2 3/4 x 1 5/81700 350JE172U020C 0.075 0.033 0.031 3.7 1 x 1 1/8


Capacitance vs. Temperature (120 Hz)

Aluminum



CORNELLDUBILIER


Ratings



2100 350GL212U020C 0.050 0.020 0.020 6.2 3/4 x 2 1/82200 350HJ222U020C 0.051 0.022 0.022 5.3 7/8 x 1 5/82800 350GP282U020C 0.040 0.017 0.017 7.5 3/4 x 2 5/83000 350JJ302U020C 0.043 0.020 0.020 5.8 1 x 1 5/83200 350HL322U020C 0.036 0.016 0.018 7.0 7/8 x 2 1/84200 350HP422U020C 0.029 0.014 0.016 8.3 7/8 x 2 5/84500 350JL452U020C 0.031 0.014 0.016 7.6 1 x 2 1/85900 350JP592U020C 0.025 0.012 0.015 9.1 1 x 2 5/8


600 350GE601U025C 0.140 0.050 0.042 2.9 3/4 x 1 1/8900 350HE901U025C 0.100 0.039 0.035 3.4 7/8 x 1 1/8

1100 350GJ112U025C 0.079 0.029 0.026 4.1 3/4 x 1 5/81300 350JE132U025C 0.082 0.034 0.031 3.6 1 x 1 1/81500 350GL152U025C 0.056 0.021 0.020 6.0 3/4 x 2 1/81600 350HJ162U025C 0.057 0.023 0.022 5.1 7/8 x 1 5/82000 350GP202U025C 0.044 0.017 0.017 7.3 3/4 x 2 5/82300 350HL232U025C 0.040 0.017 0.018 6.8 7/8 x 2 1/82300 350JJ232U025C 0.047 0.020 0.021 5.6 1 x 1 5/83100 350HP312U025C 0.032 0.014 0.016 8.2 7/8 x 2 5/83300 350JL332U025C 0.034 0.015 0.017 74.0 1 x 2 1/84300 350JP432U025C 0.027 0.013 0.016 8.9 1 x 2 5/8


450 350GE451U030C 0.155 0.052 0.043 2.8 3/4 x 1 1/8700 350HE701U030C 0.110 0.041 0.035 3.3 7/8 x 1 1/8800 350GJ801U030C 0.088 0.030 0.026 4.0 3/4 x 1 5/8950 350JE951U030C 0.089 0.036 0.032 3.4 1 x 1 1/8

1100 350GL112U030C 0.062 0.022 0.020 5.8 3/4 x 2 1/81200 350HJ122U030C 0.062 0.024 0.023 5.0 7/8 x 1 5/81500 350GP152U030C 0.048 0.018 0.017 7.1 3/4 x 2 5/81700 350JJ172U030C 0.050 0.021 0.021 5.5 1 x 1 5/81800 350HL182U030C 0.044 0.017 0.018 6.6 7/8 x 2 1/82300 350HP232U030C 0.035 0.015 0.016 8.0 7/8 x 2 5/82500 350JL252U030C 0.036 0.016 0.017 7.2 1 x 2 1/83200 350JP322U030C 0.029 0.013 0.016 8.6 1 x 2 5/8


320 350GE321U040C 0.176 0.054 0.043 2.7 3/4 x 1 1/8500 350HE501U040C 0.123 0.042 0.035 3.2 7/8 x 1 1/8600 350GJ601U040C 0.100 0.031 0.026 3.9 3/4 x 1 5/8700 350JE701U040C 0.099 0.037 0.032 3.4 1 x 1 1/8850 350GL851U040C 0.070 0.023 0.020 5.7 3/4 x 2 1/8900 350HJ901U040C 0.070 0.025 0.023 4.9 7/8 x 1 5/8

1100 350GP112U040C 0.055 0.018 0.017 6.9 3/4 x 2 5/81200 350JJ122U040C 0.056 0.022 0.021 5.4 1 x 1 5/81300 350HL132U040C 0.049 0.018 0.018 6.5 7/8 x 2 1/81700 350HP172U040C 0.039 0.015 0.016 7.9 7/8 x 2 5/81800 350JL182U040C 0.040 0.016 0.017 7.1 1 x 2 1/82300 350JP232U040C 0.032 0.013 0.016 8.5 1 x 2 5/8


250 350GE251U050C 0.195 0.057 0.043 2.6 3/4 x 1 1/8370 350HE371U050C 0.135 0.044 0.036 3.1 7/8 x 1 1/8450 350GJ451U050C 0.110 0.033 0.026 3.8 3/4 x 1 5/8500 350JE501U050C 0.105 0.038 0.033 3.3 1 x 1 1/8650 350GL651U050C 0.077 0.024 0.020 5.5 3/4 x 2 1/8680 350HJ681UO5OC 0.076 0.026 0.023 4.7 7/8 x 1 5/8



800 350GP801U050C 0.060 0.019 0.018 6.7 3/4 x 2 5/8900 350JJ901U050C 0.060 0.022 0.022 5.2 1 x 1 5/8

1000 350HL102U050C 0.054 0.019 0.019 6.3 7/8 x 2 1/81300 350HP132U050C 0.043 0.016 0.017 7.7 7/8 x 2 5/81300 350JL132U050C 0.043 0.017 0.018 7.0 1 x 2 1/81800 350JP182U050C 0.034 0.014 0.016 8.4 1 x 2 5/8


220 350GE221U060C 0.210 0.06 0.044 2.5 3/4 x 1 1/8330 350HE331U060C 0.145 0.045 0.036 3.0 7/8 x 1 1/8350 350GJ351U060C 0.120 0.034 0.027 3.7 3/4 x 1 5/8460 350JE461U060C 0.114 0.039 0.034 3.2 1 x 1 1/8500 350GL501U060C 0.082 0.024 0.020 5.4 3/4 x 2 1/8560 350HJ561U060C 0.082 0.027 0.023 4.6 7/8 x 1 5/8


150 350GE151U075C 0.64 0.240 0.240 1.7 3/4 x 1 1/8230 350HE231U075C 0.40 0.145 0.145 2.2 7/8 x 1 1/8250 350GJ251U075C 0.32 0.135 0.135 2.6 3/4 x 1 5/8320 350JE321U075C 0.28 0.110 0.110 2.5 1 x 1 1/8340 350GL341U075C 0.215 0.100 0.100 3.9 3/4 x 2 1/8390 350HJ391U075C 0.21 0.090 0.090 3.5 7/8 x 1 5/8460 350GP461U075C 0.16 0.074 0.074 5.0 3/4 x 2 5/8530 350HL531U075C 0.14 0.067 0.067 5.0 7/8 x 2 1/8540 350JJ541U075C 0.155 0.068 0.068 4.0 1 x 1 5/8710 350HP711U075C 0.106 0.050 0.05 6.4 7/8 x 2 5/8740 350JL741U075C 0.105 0.051 0.051 5.6 1 x 2 1/8

1000 350JP101U075C 0.078 0.038 0.038 7.0 1 x 2 5/8


90 350GE090U100C 0.800 0.240 0.240 1.7 3/4 x 1 1/8140 350HE141U100C 0.500 0.160 0.160 2.2 7/8 x 1 1/8160 350GJ161U100C 0.440 0.142 0.142 2.3 3/4 x 1 5/8200 350JE201U100C 0.400 0.130 0.130 2.4 1 x 1 1/8210 350GL211U100C 0.295 0.105 0.105 3.5 3/4 x 2 1/8240 350HJ241U100C 0.290 0.095 0.095 3.2 7/8 x 1 5/8290 350GP291U100C 0.220 0.078 0.078 4.6 3/4 x 2 5/8330 350HL331U100C 0.195 0.071 0.071 4.5 7/8 x 2 1/8340 350JJ341U100C 0.210 0.071 0.071 3.7 1 x 1 5/8450 350HP451U100C 0.145 0.053 0.053 5.8 7/8 x 2 5/8460 350JL461U100C 0.140 0.053 0.040 6.7 1 x 2 1/8620 350JP621U100C 0.105 0.040 0.040 6.7 1 x 2 5/8


Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



Rated Voltage: 6.3 to 450 VdcCapacitance: 7 to 18,000 F 20%

Leakage Current: 0.002 CV A +25 °C, 6.3 to 160 Vdc0.02 CV A +25 °C, 200 to 450 Vdc


Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up6.3 & 10 V 0.91 0.93 1.00 1.06 1.08 1.09 1.0916 to 25 V 0.85 0.88 1.00 1.12 1.18 1.21 1.2235 V & up 0.77 0.82 1.00 1.21 1.32 1.37 1.38

Load Life: 4,000 h @ +105 °C∆ Capacitance 15%ESR 175% of limitDCL 100% of limit

Shelf Life: 1000 h at 105 °C Capacitance 15%ESR 150% of limitDCL 200% of limit

Vibration: 10 to 55 Hz, 0.06” and 10 g, 2 h ea of 3 planes

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C2.00 1.60 1.40 1.25 1.00 0.79 0.50

Type 361R, 105 °C, Miniature, Industrial Grade, Radial Leaded

High-value, High Ripple, Low ESR & ESL

Type 361R capacitors are for industrial applications from40 C to +105 C. They deliver excellent ripple capabilityand low ESR and ESL. Also available with three mountingleads. For three leads, change Type designation from 361Rto 366R.

Highlights Excellent Ripple Capability Low ESR and ESL High Value

ripple

Type 300/301p 2.103

Type 300/301p 2.103

cold

MORE

Aluminum



CORNELLDUBILIER




361R 183 M 6R3 LV 2 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy End Seal361R 100 = 10 F M = 20 6R3 = 6.3 Vdc 0 = None (blank) = no epoxy

or 366R 101 = 100 F U = 10% +75% 063 = 63 Vdc 2 = PVC E = Epoxy183 = 18000 F

Outline Drawings

Case Nominal Insulated Insulated S T Lead Diam. WeightCode D x L D x L Epoxy Seal 0.6 0.5 mm AWG g

(mm) (mm) (mm) (mm) (mm)

EG 12.5 x 20.0 13.0 x 21.5 13.0 x 23.0 5.0 2.50 0.81 20 3.8EK 12.5 x 25.0 13.0 x 26.5 13.0 x 29.0 5.0 2.50 0.81 20 4.5EM 12.5 x 26.5 13.0 x 28.0 13.0 x 29.5 5.0 2.50 0.81 20 4.7EN 12.5 x 33.5 13.0 x 34.2 13.0 x 36.0 5.0 2.50 0.81 20 5.8ER 12.5 x 42.5 13.0 x 43.7 13.0 x 45.5 5.0 2.50 0.81 20 7.3FK 16.0 x 25.0 16.5 x 26.2 16.5 x 27.9 7.5 3.75 0.81 20 7.2FF 16.0 x 32.0 16.5 x 33.5 16.5 x 36.0 7.5 3.75 0.81 20 9.4FN 16.0 x 33.5 16.5 x 34.2 16.5 x 36.0 7.5 3.75 0.81 20 9.5FQ 16.0 x 36.0 16.5 x 37.5 16.5 x 40.0 7.5 3.75 0.81 20 10.6FV 16.0 x 40.0 16.5 x 41.7 16.5 x 42.4 7.5 3.75 0.81 20 11.9LQ 18.0 x 36.0 18.5 x 37.5 18.5 x 40.0 7.5 3.75 0.81 20 13.4LV 18.0 x 40.0 18.5 x 42.0 18.5 x 43.0 7.5 3.75 0.81 20 14.9HH 22.0 x 22.0 22.5 x 23.5 22.5 x 26.0 10.0 5.0 0.81 20 11.0HK 22.0 x 25.0 22.5 x 26.2 22.5 x 27.9 10.0 5.0 0.81 20 13.5HG 22.0 x 30.0 22.5 x 32.5 22.5 x 34.0 10.0 5.0 0.81 20 15.1

Case Dimensions

L incl. Sleeve & Epoxy Seal - Millimeters

+

+

Alum

inum

Radi

al L

eade

dCa

paci

tors

2.126

CORNELLDUBILIER


Ratings



2200 361R222M6R3EG2 0.205 1.130 12.5 x 203300 361R332M6R3EK2 0.140 1.440 12.5 x 253900 361R392M6R3EM2 0.131 1.380 12.5 x 26.54700 361R472M6R3EN2 0.098 1.840 12.5 x 33.56800 361R682M6R3ER2 0.075 2.160 12.5 x 42.56800 361R682M6R3FK2 0.084 2.000 16 x 256800 361R682M6R3HH2 0.091 2.200 22 x 228200 361R822M6R3HK2 0.075 2.330 22 x 25

10000 361R103M6R3FF2 0.068 2.330 16 x 3210000 361R103M6R3HG2 0.046 3.290 22 x 3012000 361R123M6R3FQ2 0.062 2.550 16 x 3612000 361R123M6R3FV2 0.058 2.750 16 x 4015000 361R153M6R3HV2 0.044 3.420 22 x 4015000 361R153M6R3LQ2 0.053 2.990 18 x 3618000 361R183M6R3LV2 0.049 3.240 18 x 40

10 Vdc (12.5 Vdc Surge)

1500 361R152M010EG2 0.210 0.947 12.5 x 202200 361R222M010EK2 0.158 1.330 12.5 x 252700 361R272M010EM2 0.144 1.420 12.5 x 26.53300 361R332M010EN2 0.115 1.760 12.5 x 33.54700 361R472M010ER2 0.083 2.250 12.5 x 42.54700 361R472M010FK2 0.093 2.000 16 x 254700 361R472M010HH2 0.094 2.170 22 x 225600 361R562M010HK2 0.074 2.540 22 x 256800 361R682M010FF2 0.073 2.440 16 x 328200 361R822M010FQ2 0.063 2.950 16 x 368200 361R822M010HG2 0.052 3.170 22 x 30

10000 361R103M010FV2 0.059 3.000 16 x 4012000 361R123M010HV2 0.046 3.390 22 x 4012000 361R123M010LQ2 0.056 3.050 18 x 3615000 361R153M010LV2 0.051 3.400 18 x 40


1000 361R102M016EG2 0.265 0.942 12.5 x 201800 361R182M016EK2 0.156 1.350 12.5 x 252200 361R222M016EM2 0.147 1.410 12.5 x 26.53300 361R332M016EN2 0.108 1.790 12.5 x 33.53300 361R332M016FK2 0.100 1.880 16 x 253300 361R332M016HH2 0.100 2.080 22 x 22

ESR Max Ω Ripple A NomCap. Catalog + 25 °C + 85 °C Size (mm)F Part Number 120 Hz 120 Hz D X L



4700 361R472M016ER2 0.084 2.200 12.5 x 42.54700 361R472M016FF2 0.077 2.280 16 x 324700 361R472M016HK2 0.082 2.430 22 x 256800 361R682M016FQ2 0.066 2.670 16 x 366800 361R682M016FV2 0.064 2.700 16 x 406800 361R682M016HG2 0.014 3.110 22 x 307800 361R782M016LQ2 0.060 2.800 18 x 369000 361R902M016HV2 0.011 3.590 22 x 40

10000 361R103M016LV2 0.053 3.000 18 x 40


1000 361R102M020EG2 0.200 0.970 12.5 x 201500 361R152M020EK2 0.133 1.300 12.5 x 252200 361R222M020EM2 0.103 1.510 12.5 x 26.52700 361R272M020EN2 0.084 1.840 12.5 x 33.53300 361R332M020FK2 0.076 2.000 16 x 253300 361R332M020HH2 0.076 2.320 22 x 223900 361R392M020ER2 0.065 2.320 12.5 x 42.53900 361R392M020HK2 0.065 2.500 22 x 254700 361R472M020FF2 0.060 2.480 16 x 325600 361R562M020FQ2 0.055 2.720 16 x 366800 361R682M020FV2 0.053 2.900 16 x 406800 361R682M020HG2 0.047 3.330 22 x 308200 361R822M020LQ2 0.047 3.180 18 x 36

10000 361R103M020HV2 0.044 3.750 22 x 4010000 361R103M020LV2 0.044 3.280 18 x 40


820 361R821M025EG2 0.280 0.860 12.5 x 201000 361R102M025EK2 0.230 1.080 12.5 x 251200 361R122M025EM2 0.190 1.150 12.5 x 26.51800 361R182M025EN2 0.128 1.550 12.5 x 33.52200 361R222M025FK2 0.121 1.660 16 x 252200 361R222M025HH2 0.121 1.840 22 x 222700 361R272M025ER2 0.096 2.000 12.5 x 42.53300 361R332M025FF2 0.091 2.080 16 x 323300 361R332M025HK2 0.091 2.230 22 x 253900 361R392M025FK2 0.081 2.360 16 x 364700 361R472M025FV2 0.071 2.560 16 x 404700 361R472M025HG2 0.071 2.750 22 x 30

Type 361R Impedance vs. Frequency - 10,000 F 10 Vdc



Phone (864) 843-2277, Fax (864) 843-3800http://www.cornell-dubilier.com


Aluminum




CORNELLDUBILIER



4700 361R472M025LQ2 0.071 2.710 18 x 365600 361R562M025LV2 0.065 2.830 18 x 406800 361R682M025HV2 0.053 3.610 22 x 40


680 361R681M035EG2 0.287 0.850 12.5 x 201000 361R102M035EK2 0.199 1.200 12.5 x 251200 361R122M035EM2 0.190 1.250 12.5 x 26.51500 361R152M035EN2 0.133 1.570 12.5 x 33.51800 361R182M035FK2 0.133 1.620 16 x 251800 361R182M035HH2 0.110 1.840 22 x 222200 361R222M035ER2 0.106 1.900 12.5 x 42.52200 361R222M035FF2 0.106 2.000 16 x 322700 361R272M035FQ2 0.086 2.330 16 x 362700 361R272M035HK2 0.086 2.180 22 x 253300 361R332M035FV2 0.080 2.380 16 x 403300 361R332M035HG2 0.081 2.570 22 x 303300 361R332M035LQ2 0.080 2.400 18 x 364700 361R472M035HV2 0.064 3.270 22 x 404700 361R472M035LV2 0.064 2.700 18 x 40


330 361R331M050EG2 0.443 0.760 12.5 x 20470 361R471M050EK2 0.343 0.960 12.5 x 25560 361R561M050EM2 0.266 1.050 12.5 x 26.5820 361R821M050EN2 0.180 1.380 12.5 x 33.5820 361R821M050HH2 0.190 1.560 22 x 22

1000 361R102M050FK2 0.156 1.530 16 x 251200 361R122M050ER2 0.125 1.810 12.5 x 42.51500 361R152M050FF2 0.101 2.140 16 x 321500 361R152M050HK2 0.106 2.160 22 x 251800 361R182M050FQ2 0.083 2.440 16 x 361800 361R182M050HG2 0.084 2.490 22 x 302200 361R222M050LQ2 0.081 2.640 18 x 362200 361R222M050FV2 0.081 2.600 16 x 402700 361R272M050HV2 0.067 3.190 22 x 402700 361R272M050LV2 0.065 3.040 18 x 40


330 361R331M063EG2 0.450 0.760 12.5 x 20470 361R471M063EK2 0.318 0.960 12.5 x 25470 361R471M063EM2 0.318 0.980 12.5 x 26.5560 361R561M063EN2 0.268 1.150 12.5 x 33.5680 361R681M063ER2 0.183 1.540 12.5 x 42.5820 361R821M063FK2 0.220 1.310 16 x 25820 361R821M063HH2 0.220 1.420 22 x 22

1200 361R122M063FF2 0.150 1.700 16 x 321200 361R122M063HK2 0.150 1.810 22 x 251500 361R152M063FQ2 0.125 1.980 16 x 361500 361R152M063HG2 0.099 2.310 22 x 301800 361R182M063FV2 0.100 2.300 16 x 401800 361R182M063LQ2 0.100 2.580 18 x 362200 361R222M063HV2 0.072 2.990 22 x 402200 361R222M063LV2 0.083 2.700 18 x 40


150 361R151M075EG2 1.070 0.450 12.5 x 20220 361R221M075EK2 0.727 0.580 12.5 x 25


270 361R271M075EM2 0.600 0.650 12.5 x 26.5390 361R391M075EN2 0.410 0.870 12.5 x 33.5470 361R471M075FK2 0.340 1.000 16 x 25470 361R471M075HH2 0.340 1.040 22 x 22560 361R561M075ER2 0.285 1.160 12.5 x 42.5680 361R681M075FF2 0.235 1.320 16 x 32680 361R681M075HK2 0.235 1.310 22 x 25820 361R821M075FQ2 0.195 1.520 16 x 36

1000 361R102M075FV2 0.160 1.660 16 x 401000 361R102M075HG2 0.161 1.810 22 x 301000 361R102M075LQ2 0.160 1.700 18 x 361200 361R122M075LV2 0.133 1.900 18 x 401500 361R152M075HV2 0.107 2.530 22 x 40


100 361R101M100EG2 1.650 0.355 12.5 x 20120 361R121M100EK2 1.320 0.450 12.5 x 25150 361R151M100EM2 1.100 0.500 12.5 x 26.5220 361R221M100EN2 0.750 0.666 12.5 x 33.5220 361R221M100HH2 0.750 0.760 22 x 22270 361R271M100ER2 0.610 0.750 12.5 x 42.5270 361R271M100HK2 0.520 0.950 22 x 25330 361R331M100FK2 0.500 0.875 16 x 25390 361R391M100FF2 0.420 1.010 16 x 32470 361R471M100FQ2 0.350 1.150 16 x 36470 361R471M100FV2 0.350 1.250 16 x 40470 361R471M100HG2 0.351 1.250 22 x 30560 361R561M100LQ2 0.290 1.370 18 x 36680 361R681M100HV2 0.241 1.690 22 x 40680 361R681M100LV2 0.240 1.570 18 x 40


33 361R330M160EG2 5.000 0.200 12.5 x 2047 361R470M160EK2 3.500 0.250 12.5 x 2556 361R560M160EM2 2.950 0.280 12.5 x 26.582 361R820M160EN2 2.000 0.380 12.5 x 33.5

100 361R101M160ER2 1.650 0.460 12.5 x 42.5100 361R101M160FK2 1.650 0.430 16 x 25100 361R101M160HH2 1.650 0.475 22 x 22150 361R151M160FF2 1.100 0.580 16 x 32150 361R151M160HK2 1.100 0.610 22 x 25180 361R181M160FQ2 0.920 0.665 16 x 36220 361R221M160FV2 0.750 0.770 16 x 40220 361R221M160HG2 0.751 0.840 22 x 30220 361R221M160LQ2 0.750 0.800 18 x 36270 361R271M160LV2 0.610 0.920 18 x 40330 361R331M160HV2 0.512 0.990 22 x 40


27 361R270M200EG2 5.900 0.175 12.5 x 2047 361R470M200EK2 3.600 0.250 12.5 x 2556 361R560M200EM2 3.000 0.280 12.5 x 26.568 361R680M200EN2 2.500 0.340 12.5 x 33.582 361R820M200FK2 2.000 0.390 16 x 2582 361R820M200HH2 2.000 0.430 22 x 22

100 361R101M200ER2 1.650 0.450 12.5 x 42.5120 361R121M200FF2 1.380 0.520 16 x 32120 361R121M200HK2 1.380 0.545 22 x 25

RatingsESR Max Ω Ripple A Nom

Cap. Catalog + 25 °C + 85 °C Size (mm)F Part Number 120 Hz 120 Hz D X L


Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



Ratings


150 361R151M200FQ2 1.100 0.600 16 x 36180 361R181M200HG2 1.000 0.730 22 x 30220 361R221M200FV2 0.760 0.760 16 x 40220 361R221M200LQ2 0.760 0.790 18 x 36270 361R271M200HV2 0.781 0.940 22 x 40270 361R271M200LV2 0.620 0.910 18 x 40


18 361R180M250EG2 9.200 0.145 12.5 x 2027 361R270M250EK2 6.100 0.190 12.5 x 2533 361R330M250EM2 5.000 0.215 12.5 x 26.547 361R470M250EN2 3.500 0.285 12.5 x 33.547 361R470M250FK2 3.500 0.295 16 x 2556 361R560M250ER2 2.950 0.345 12.5 x 42.556 361R560M250HH2 2.950 0.350 22 x 2268 361R680M250FF2 2.420 0.390 16 x 3282 361R820M250FQ2 2.000 0.450 16 x 3682 361R820M250HK2 2.000 0.450 22 x 25

100 361R101M250FV2 1.650 0.515 16 x 40120 361R121M250HG2 1.380 0.620 22 x 30120 361R121M250LQ2 1.380 0.585 18 x 36150 361R151M250LV2 1.100 0.685 18 x 40180 361R181M250HV2 0.921 0.880 22 x 40


12 361R120M300EG2 13.800 0.120 12.5 x 2018 361R180M300EK2 9.150 0.155 12.5 x 2522 361R220M300EM2 7.500 0.175 12.5 x 26.533 361R330M300EN2 5.000 0.240 12.5 x 33.533 361R330M300FK2 5.000 0.245 16 x 2539 361R390M300HH2 4.250 0.295 22 x 2247 361R470M300ER2 3.500 0.315 12.5 x 42.547 361R470M300FF2 3.500 0.325 16 x 3256 361R560M300FQ2 2.950 0.375 16 x 3656 361R560M300HK2 2.950 0.375 22 x 2568 361R680M300FV2 2.420 0.430 16 x 4068 361R680M300HG2 2.420 0.480 22 x 3082 361R820M300LQ2 2.000 0.485 18 x 36

100 361R101M300HV2 1.650 0.650 22 x 40100 361R101M300LV2 1.650 0.555 18 x 40


10 361R100M350EK2 16.500 0.115 12.5 x 2515 361R150M350EM2 11.000 0.145 12.5 x 26.522 361R220M350EN2 7.500 0.195 12.5 x 33.527 361R270M350FK2 6.100 0.225 16 x 2533 361R330M350ER2 5.000 0.265 12.5 x 42.533 361R330M350HH2 5.000 0.275 22 x 2239 361R390M350FF2 4.250 0.295 16 x 3247 361R470M350FQ2 3.500 0.340 16 x 3647 361R470M350HK2 3.500 0.340 22 x 2556 361R560M350FV2 2.950 0.385 16 x 4056 361R560M350HG2 2.950 0.420 22 x 3068 361R680M350LQ2 2.420 0.445 18 x 3682 361R820M350HV2 2.000 0.590 22 x 4082 361R820M350LV2 2.000 0.500 18 x 40



8 361R080M400EK2 20.000 0.105 12.5 x 2512 361R120M400EM2 13.800 0.125 12.5 x 26.518 361R180M400EN2 9.100 0.175 12.5 x 33.522 361R220M400FK2 7.500 0.200 16 x 2527 361R270M400ER2 6.100 0.235 12.5 x 42.533 361R330M400FF2 5.000 0.275 16 x 3233 361R330M400HH2 5.000 0.275 22 x 2239 361R390M400FQ2 4.200 0.315 16 x 3639 361R390M400HK2 4.200 0.315 22 x 2547 361R470M400FV2 3.500 0.355 16 x 4047 361R470M400HG2 3.510 0.390 22 x 3056 361R560M400LQ2 2.950 0.400 18 x 3668 361R680M400HV2 2.420 0.530 22 x 4068 361R680M400LV2 2.420 0.465 18 x 40


7 361R070M450EK2 20.000 0.100 12.5 x 2510 361R100M450EM2 16.500 0.120 12.5 x 26.515 361R150M450EN2 11.000 0.165 12.5 x 33.518 361R180M450FK2 9.100 0.185 16 x 2522 361R220M450ER2 7.500 0.215 12.5 x 42.527 361R270M450FF2 6.100 0.245 16 x 3227 361R270M450HH2 6.100 0.245 22 x 2233 361R330M450FQ2 5.000 0.285 16 x 3633 361R330M450HK2 5.000 0.300 22 x 2539 361R390M450FV2 4.200 0.325 16 x 4039 361R390M450HG2 4.200 0.350 22 x 3047 361R470M450LQ2 3.500 0.365 18 x 3656 361R560M450LV2 2.950 0.415 18 x 4068 361R680M450HV2 2.450 0.530 22 x 40


Aluminum



CORNELLDUBILIER


Type 4CMC 85 °C, High-Cap, Computer Grade, Radial Leaded


Rated Voltage: 16 to 500 VdcCapacitance: 210 µF to 330,000 µF ± 20%

Capacitance Tolerance: ± 20%DC Leakage Current: 6 CV A, 6 max, 5 min,

Cold Impedance: 20 C multiple of 25 C Z8 for 16 to 50 V, 4 for 63 to 100 V, 3 for 160 V & up

Ripple Current Multipliers: Ambient Temperatures

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up6.3 to 50 V 0.80 0.85 1.00 1.05 1.08 1.08 1.0863 to 250 V 0.80 0.83 1.00 1.15 1.20 1.20 1.20300 to 500 V 0.78 0.80 1.00 1.30 1.40 1.40 1.40

EIA Ripple Life: 2000 h @ 85 °C and full load Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h @ 85 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane.

45 °C 55 °C 65 °C 75 °C 85 °C2.00 2.00 1.73 1.41 1.00

Best Value Printed Circuit Mount Type

The Type 4CMC is the PC-mount version of the high-capac-itance Type DCMC screw-terminal capacitor and has about50% more capacitance per can size through 250 V. It’s forbus filtering applications where more capacitance or smallercan size is important like welders and energy storage. It’s amuch better value than a large snap-in capacitor. Its extend-ed cathode foil assures cool operation with heatflow fromthe capacitor element to the can in all mounting orientations.

Highlights Much better value than large snap-in capacitor Ripple Currents to > 50 amps at 55 °C 3-leads for reverse proof, strong mounting Printed-circuit mounting version of DCMC Thermal-Pak™ extended cathode construction

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER



Case Dimensions

Case Inches MillimetersCode D ±.031 L MAX C ±.015 S ±.031 E ±.031 F±.015 D±.78 L MAX C±.78 S±.78 E±.78 F±.38

AK 1.375 1.75 0.50 0.175 0.25 0.55 34.93 44.45 12.70 4.45 6.35 13.97AA 1.375 2.25 0.50 0.175 0.25 0.55 34.93 57.15 12.70 4.45 6.35 13.97AH 1.375 2.75 0.50 0.175 0.25 0.55 34.98 69.85 12.70 4.45 6.35 13.97AB 1.375 3.25 0.50 0.175 0.25 0.55 34.93 82.55 12.70 4.45 6.35 13.97AJ 1.375 3.75 0.50 0.175 0.25 0.55 34.93 95.25 12.70 4.45 6.35 13.97

AC 1.375 4.25 0.50 0.175 0.25 0.55 34.93 107.95 12.70 4.45 6.35 13.97AD 1.375 4.75 0.50 0.175 0.25 0.55 34.93 120.65 12.70 4.45 6.35 13.97AE 1.375 5.25 0.50 0.175 0.25 0.55 34.93 133.35 12.70 4.45 6.35 13.97AF 1.375 5.75 0.50 0.175 0.25 0.55 34.93 146.05 12.70 4.45 6.35 13.97EA 1.75 2.25 0.70 0.375 0.35 0.90 44.45 57.15 17.78 9.53 8.89 22.86

EH 1.75 2.75 0.70 0.375 0.35 0.90 44.45 69.85 17.78 9.53 8.89 22.86EB 1.75 3.25 0.70 0.375 0.35 0.90 44.45 82.55 17.78 9.53 8.89 22.86EJ 1.75 3.75 0.70 0.375 0.35 0.90 44.45 95.25 17.78 9.53 8.89 22.86EC 1.75 4.25 0.70 0.375 0.35 0.90 44.45 107.95 17.78 9.53 8.89 22.86ED 1.75 4.75 0.70 0.375 0.35 0.90 44.45 120.65 17.78 9.53 8.89 22.86

EE 1.75 5.25 0.70 0.375 0.35 0.90 44.45 133.35 17.78 9.53 8.89 22.86EF 1.75 5.75 0.70 0.375 0.35 0.90 44.45 146.05 17.78 9.53 8.89 22.86BA 2.00 2.25 0.80 0.425 0.40 1.00 50.80 57.15 20.32 10.80 10.16 25.40BH 2.00 2.75 0.80 0.425 0.40 1.00 50.80 69.85 20.32 10.80 10.16 25.40BB 2.00 3.25 0.80 0.425 0.40 1.00 50.80 82.55 20.32 10.80 10.16 25.40

BJ 2.00 3.75 0.80 0.425 0.40 1.00 50.80 95.25 20.32 10.80 10.16 25.40BC 2.00 4.25 0.80 0.425 0.40 1.00 50.80 107.95 20.32 10.80 10.16 25.40BD 2.00 4.75 0.80 0.425 0.40 1.00 50.80 120.65 20.32 10.80 10.16 25.40BE 2.00 5.25 0.80 0.425 0.40 1.00 50.80 133.25 20.32 10.80 10.16 25.40BF 2.00 5.75 0.80 0.425 0.40 1.00 50.80 146.05 20.32 10.80 10.16 25.40

Outline Drawings

++

Laydown Style

LAY DOWN, 3 LEADS (L)


4CMC 382 M 100 AK 8

Type Capacitance Tolerance Voltage Case Code Insulation Terminal4CMX 382 = 3800 F M = 20% 6R3 = 6.3 V 0 = Bare Can (blank) = Straight Leads

212 = 2100 F T = 10% +50% 063 = 63 V 8 = PVC & standoffs L = Lay Down (3 leads)U = 10% +75% 100 = 100 V 9 = Polyester

& standoffs

370000 4CMC374M016BE8 10.0 8.0 18.1 20.3 2 X 5 1/4420000 4CMC424M016BF8 9.0 7.2 19.8 22.2 2 X 5 3/4

25 Vdc (30 Vdc Surge)22000 4CMC223M025AK8 63.2 50.4 4.2 4.7 1 3/8 X 1 3/437000 4CMC373M025AA8 23.9 19.1 7.9 8.8 1 3/8 X 2 1/452000 4CMC523M025AH8 20.6 16.4 8.8 9.8 1 3/8 X 2 3/454000 4CMC543M025EA8 22.9 18.3 9.3 10.4 1 3/4 X 2 1/467000 4CMC673M025AB8 16.6 13.2 10.5 11.7 1 3/8 X 3 1/478000 4CMC783M025EH8 19.0 15.1 10.9 12.2 1 3/4 X 2 3/482000 4CMC823M025AJ8 14.3 11.4 11.8 13.2 1 3/8 X 3 3/483000 4CMC833M025BA8 19.0 15.2 10.9 12.2 2 X 2 1/497000 4CMC973M025AC8 13.9 11.1 12.6 14.2 1 3/8 X 4 1/4

100000 4CMC104M025BH8 15.5 12.4 13.0 14.6 2 X 2 3/4100000 4CMC1003M025EB8 17.3 13.8 12.3 13.8 1 3/4 X 3 1/4110000 4CMC114M025AD8 12.8 10.2 13.8 15.4 1 3/8 X 4 3/4120000 4CMC124M025AE8 11.9 9.5 15.0 16.8 1 3/8 X 5 1/4120000 4CMC124M025EJ8 16.4 13.0 13.1 14.6 1 3/4 X 3 3/4130000 4CMC134M025BB8 12.7 10.1 15.2 17.0 2 X 3 1/4140000 4CMC144M025AF8 11.4 9.1 16.1 18.0 1 3/8 X 5 3/4150000 4CMC154M025EC8 14.1 11.2 14.6 16.3 1 3/4 X 4 1/4160000 4CMC164M025BJ8 12.5 10.0 17.1 19.2 2 X 3 3/4170000 4CMC174M025ED8 12.5 10.0 16.3 18.3 1 3/4 X 4 3/4190000 4CMC194M025EE8 11.3 9.0 18.2 20.4 1 3/4 X 5 1/4190000 4CMC194M025BC8 12.2 9.7 17.4 19.5 2 X 4 1/4

16 Vdc (20 Vdc Surge)33000 4CMC333M016AK8 34.2 27.2 5.7 6.4 1 3/8 X 1 3/455000 4CMC553M016AA8 21.2 16.9 8.4 9.4 1 3/8 X 2 1/477000 4CMC773M016AH8 18.3 14.6 9.3 10.4 1 3/8 X 2 3/479000 4CMC793M016EA8 23.0 18.3 9.2 10.4 1 3/4 X 2 1/499000 4CMC993M016AB8 14.8 11.8 11.1 12.4 1 3/8 X 3 1/4

110000 4CMC114M016EH8 17.4 13.8 11.4 12.7 1 3/4 X 2 3/4120000 4CMC124M016AJ8 12.8 10.2 12.5 14.0 1 3/8 X 3 3/4120000 4CMC124M016BA8 17.7 14.1 10.0 11.2 2 X 2 1/4140000 4CMC144M016AC8 12.5 9.9 13.3 15.0 1 3/8 X 4 1/4140000 4CMC144M016EB8 15.8 12.6 12.9 14.4 1 3/4 X 3 1/4150000 4CMC154M016BH8 14.5 11.6 11.9 13.3 2 X 2 3/4160000 4CMC164M016AD8 11.5 9.1 14.5 16.2 1 3/8 X 4 3/4180000 4CMC184M016AE8 10.8 8.6 15.8 17.7 1 3/8 X 5 1/4180000 4CMC184M016EJ8 15.0 12.0 13.6 15.3 1 3/4 X 3 3/4190000 4CMC194M016BB8 12.3 9.8 13.6 15.2 2 X 3 1/4200000 4CMC204M016AF8 10.3 8.2 16.9 19.0 1 3/8 X 5 3/4220000 4CMC224M016EC8 13.0 10.3 15.2 17.0 1 3/4 X 4 1/4240000 4CMC244M016BJ8 11.7 9.3 15.6 17.5 2 X 3 3/4250000 4CMC254M016ED8 11.5 9.2 17.0 19.0 1 3/4 X 4 3/4280000 4CMC284M016EE8 10.5 8.4 18.9 21.2 1 3/4 X 5 1/4280000 4CMC284M016BC8 11.4 9.1 15.9 17.8 2 X 4 1/4310000 4CMC314M016EF8 9.7 7.7 21.0 23.5 1 3/4 X 5 3/4330000 4CMC334M016BD8 10.7 8.5 16.9 19.0 2 X 4 3/4

Aluminum



CORNELLDUBILIER




Type 4CMC Operating Life vs Ripple Current (90% V)

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5


Exp

ecte

d O

pera

ting

Lif

e, k

h

45°C

55°C

65°C

75°C

85°C

Type 4CMC Capacitance vs Temperature & Frequency 2000µF 200V

0

0.2

0.4

0.6

0.8

1

1.2

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

˚C, 1

20 H

z V

alue

85˚C25˚C

45˚C

0˚C

–40˚C

65˚C

–20˚C

Type 4CMC ESR vs Temperature and Frequency 200µF 200V

0.1

1

10

100

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

˚C, 1

20 H

z V

alue

–40˚C

–20˚C

0˚C

25˚C

45˚C

85˚C65˚C

Type 4CMC Impedance vs Temperature and Frequency 200µF 200V

0.01

0.1

1

10

100

10 100 1000 10000 100000

Frequency (Hz)

Rat

io t

o 25

˚C, 1

20 H

z V

alue

–40˚C

0˚C

25˚C

65˚C 85˚C

–20˚C

45˚C

ESR Max. 25 °C Ripple Amps, 85 °C Nom SizeCap. Catalog Part 120 Hz 20 kHz 120 Hz 20 kHz D X L F Number (mΩ) (mΩ) (A) (A) (in)


Ratings

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER


Ratings



210000 4CMC214M025EF8 10.5 8.3 20.2 22.6 1 3/4 X 5 3/4220000 4CMC224M025BD8 11.4 9.1 18.6 20.8 2 X 4 3/4250000 4CMC254M025BE8 10.6 8.5 19.9 22.3 2 X 5 1/4280000 4CMC284M025BF8 9.6 7.6 21.8 24.4 2 X 5 3/4

35 Vdc (40 Vdc Surge)15000 4CMC153M035AK8 63.2 50.4 4.2 4.7 1 3/8 X 1 3/425000 4CMC253M035AA8 23.9 19.1 7.9 8.8 1 3/8 X 2 1/435000 4CMC353M035AH8 20.6 16.4 8.8 9.8 1 3/8 X 2 3/438000 4CMC383M035EA8 22.7 18.1 9.3 10.4 1 3/4 X 2 1/445000 4CMC453M035AB8 16.6 13.2 10.5 11.7 1 3/8 X 3 1/452000 4CMC523M035EH8 19.0 15.1 10.9 12.2 1 3/4 X 2 3/455000 4CMC553M035AJ8 14.3 11.4 11.8 13.2 1 3/8 X 3 3/456000 4CMC563M035BA8 19.0 15.2 10.9 12.2 2 X 2 1/465000 4CMC653M035AC8 13.9 11.1 12.6 14.2 1 3/8 X 4 1/467000 4CMC673M035EB8 17.3 13.8 12.3 13.8 1 3/4 X 3 1/468000 4CMC683M035BH8 15.5 12.4 13.0 14.6 2 X 2 3/475000 4CMC753M035AD8 12.8 10.2 13.8 15.4 1 3/8 X 4 3/483000 4CMC833M035EJ8 16.4 13.0 13.1 14.6 1 3/4 X 3 3/484000 4CMC843M035AE8 11.9 9.5 15.2 17.1 1 3/8 X 5 1/487000 4CMC873M035BB8 12.7 10.1 15.2 17.0 2 X 3 1/493000 4CMC933M035AF8 11.4 9.1 16.1 18.1 1 3/8 X 5 3/4

100000 4CMC104M035EC8 14.1 11.2 14.6 16.3 1 3/4 X 4 1/4110000 4CMC114M035BJ8 12.5 10.0 17.1 19.2 2 X 3 3/4110000 4CMC114M035ED8 12.5 10.0 16.3 18.3 1 3/4 X 4 3/4130000 4CMC134M035EE8 11.3 9.0 18.2 20.4 1 3/4 X 5 1/4130000 4CMC134M035BC8 12.2 9.7 17.4 19.5 2 X 4 1/4140000 4CMC144M035EF8 10.5 8.3 20.2 22.6 1 3/4 X 5 3/4150000 4CMC154M035BD8 11.4 9.1 18.6 20.8 2 X 4 3/4170000 4CMC174M035BE8 10.6 8.5 20.0 22.4 2 X 5 1/4190000 4CMC194M035BF8 9.6 7.6 21.7 24.4 2 X 5 3/4

50 Vdc (65 Vdc Surge)10000 4CMC103M050AK8 44.3 35.3 5.0 5.7 1 3/8 X 1 3/417000 4CMC173M050AA8 27.3 21.8 7.4 8.2 1 3/8 X 2 1/424000 4CMC243M050AH8 23.4 18.7 8.2 9.2 1 3/8 X 2 3/427000 4CMC273M050EA8 28.2 22.5 8.4 9.4 1 3/4 X 2 1/431000 4CMC313M050AB8 18.9 15.1 9.8 11.0 1 3/8 X 3 1/433000 4CMC333M050BA8 27.9 22.3 9.0 10.1 2 X 2 1/436000 4CMC363M050EH8 21.2 16.9 10.3 11.5 1 3/4 X 2 3/438000 4CMC383M050AJ8 16.2 13.0 11.1 12.4 1 3/8 X 3 3/439000 4CMC393M050EB8 20.3 16.2 11.3 12.7 1 3/4 X 3 1/445000 4CMC453M050AC8 15.7 12.5 11.9 13.3 1 3/8 X 4 1/447000 4CMC473M050AD8 14.9 11.9 12.7 14.3 1 3/8 X 4 3/447000 4CMC473M050BH8 19.6 15.6 11.6 13.0 2 X 2 3/448000 4CMC483M050EJ8 19.2 15.3 12.1 13.5 1 3/4 X 3 3/453000 4CMC533M050AE8 13.9 11.0 13.9 15.6 1 3/8 X 5 1/456000 4CMC563M050BB8 16.3 13.0 13.4 15.0 2 X 3 1/458000 4CMC583M050EC8 16.5 13.1 13.5 15.1 1 3/4 X 4 1/460000 4CMC603M050AF8 13.2 10.5 15.0 16.8 1 3/8 X 5 3/467000 4CMC673M050ED8 14.5 11.6 15.1 17.0 1 3/4 X 4 3/468000 4CMC683M050BJ8 15.0 12.0 15.6 17.5 2 X 3 3/476000 4CMC763M050EE8 13.1 10.5 16.9 18.9 1 3/4 X 5 1/482000 4CMC823M050BC8 14.3 11.4 16.1 18.0 2 X 4 1/485000 4CMC853M050EF8 12.1 9.6 18.8 21.1 1 3/4 X 5 3/491000 4CMC913M050BD8 12.7 10.1 17.6 19.8 2 X 4 3/4

100000 4CMC104M050BE8 11.8 9.4 19.0 21.3 2 X 5 1/4120000 4CMC124M050BF8 10.5 8.4 20.7 23.2 2 X 5 3/4

63 Vdc (75 Vdc Surge)7500 4CMC752M063AK8 44.1 35.1 5.1 5.7 1 3/8 X 1 3/4

12000 4CMC123M063AA8 26.8 21.4 7.4 8.3 1 3/8 X 2 1/416000 4CMC163M063EA8 28.2 22.5 8.3 9.3 1 3/4 X 2 1/416000 4CMC163M063AH8 23.5 18.8 8.2 9.2 1 3/8 X 2 3/421000 4CMC213M063AB8 18.7 14.9 9.9 11.1 1 3/8 X 3 1/422000 4CMC223M063EH8 21.2 16.9 10.3 11.5 1 3/4 X 2 3/426000 4CMC263M063AJ8 16.9 13.5 10.9 12.2 1 3/8 X 3 3/426000 4CMC263M063BA8 27.7 22.1 9.0 10.1 2 X 2 1/429000 4CMC293M063EB8 20.9 16.7 11.2 12.5 1 3/4 X 3 1/430000 4CMC303M063AC8 17.3 13.8 11.3 12.7 1 3/8 X 4 1/433000 4CMC333M063BH8 19.5 15.5 11.6 13.0 2 X 2 3/435000 4CMC353M063AD8 15.7 12.5 12.4 13.9 1 3/8 X 4 3/436000 4CMC363M063EJ8 20.0 16.0 11.8 13.2 1 3/4 X 3 3/438000 4CMC383M063AE8 14.5 11.5 13.8 15.5 1 3/8 X 5 1/443000 4CMC433M063EC8 17.2 13.7 13.2 14.8 1 3/4 X 4 1/444000 4CMC443M063AF8 13.7 10.9 14.7 16.5 1 3/8 X 5 3/447000 4CMC473M063BB8 16.2 12.9 13.4 15.0 2 X 3 1/450000 4CMC503M063ED8 15.2 12.2 14.8 16.6 1 3/4 X 4 3/453000 4CMC533M063BJ8 15.1 12.0 15.6 17.4 2 X 3 3/457000 4CMC573M063EE8 13.8 11.0 16.5 18.5 1 3/4 X 5 1/459000 4CMC593M063BC8 14.5 11.5 16.0 17.9 2 X 4 1/464000 4CMC643M063EF8 12.7 10.1 18.4 20.6 1 3/4 X 5 3/469000 4CMC693M063BD8 12.8 10.2 17.6 19.7 2 X 4 3/479000 4CMC793M063BE8 11.6 9.2 19.1 21.4 2 X 5 1/489000 4CMC893M063BF8 10.7 8.5 20.6 23.1 2 X 5 3/4

5600 4CMC562M080AK8 59.6 47.5 4.4 4.9 1 3/8 X 1 3/48500 4CMC852M080AA8 36.2 28.8 6.4 7.2 1 3/8 X 2 1/4

12000 4CMC123M080EA8 38.4 30.6 7.2 8.0 1 3/4 X 2 1/412000 4CMC123M080AH8 31.5 25.1 7.1 7.9 1 3/8 X 2 3/415000 4CMC153M080AB8 31.6 25.2 7.6 8.5 1 3/8 X 3 1/417000 4CMC173M080EH8 34.0 27.1 8.1 9.1 1 3/4 X 2 3/418000 4CMC183M080BA8 32.8 26.1 8.3 9.3 2 X 2 1/419000 4CMC193M080AJ8 25.2 20.1 8.9 10.0 1 3/8 X 3 3/422000 4CMC223M080AC8 20.9 16.7 10.3 11.5 1 3/8 X 4 1/422000 4CMC223M080EB8 30.5 24.3 9.3 10.4 1 3/4 X 3 1/423000 4CMC233M080BH8 23.1 18.4 10.7 11.9 2 X 2 3/426000 4CMC263M080AD8 19.1 15.2 11.2 12.6 1 3/8 X 4 3/427000 4CMC273M080EJ8 25.1 20.0 10.5 11.8 1 3/4 X 3 3/429000 4CMC293M080AE8 17.7 14.1 12.5 14.0 1 3/8 X 5 1/430000 4CMC303M080BB8 19.2 15.3 12.3 13.8 2 X 3 1/432000 4CMC323M080AF8 16.7 13.3 13.3 14.9 1 3/8 X 5 3/432000 4CMC323M080EC8 21.5 17.1 11.8 13.2 1 3/4 X 4 1/437000 4CMC373M080BJ8 18.0 14.3 14.3 16.0 2 X 3 3/437000 4CMC373M080ED8 18.9 15.1 13.3 14.9 1 3/4 X 4 3/443000 4CMC433M080BC8 15.9 12.6 15.3 17.1 2 X 4 1/443000 4CMC433M080EE8 17.0 13.6 14.8 16.6 1 3/4 X 5 1/448000 4CMC483M080EF8 15.6 12.4 16.6 18.6 1 3/4 X 5 3/450000 4CMC503M080BD8 13.6 10.8 17.1 19.1 2 X 4 3/458000 4CMC583M080BE8 12.2 9.7 18.6 20.9 2 X 5 1/465000 4CMC653M080BF8 11.2 8.9 20.1 22.5 2 X 5 3/4

100 Vdc (125 Vdc Surge)3800 4CMC382M100AK8 58.6 46.7 4.4 4.9 1 3/8 X 1 3/46300 4CMC632M100AA8 35.6 28.3 6.5 7.2 1 3/8 X 2 1/48100 4CMC812M100AH8 32.8 26.2 2.2 2.5 1 3/8 X 2 3/4


Aluminum



CORNELLDUBILIER


Ratings

Type 4CMC, 85 °C, High-Cap, Computer Grade, Radial Leaded

8200 4CMC822M100EA8 39.2 31.2 7.1 7.9 1 3/4 X 2 1/410000 4CMC103M100AB8 32.9 26.2 7.4 8.3 1 3/8 X 3 1/411000 4CMC113M100BA8 35.9 28.7 7.9 8.9 2 X 2 1/412000 4CMC123M100EH8 34.7 27.7 8.0 9.0 1 3/4 X 2 3/413000 4CMC133M100AJ8 31.7 25.3 7.9 8.9 1 3/8 X 3 3/415000 4CMC153M100EB8 31.1 24.8 9.2 10.3 1 3/4 X 3 1/415000 4CMC153M100AC8 27.4 21.8 0.9 1.1 1 3/8 X 4 1/416000 4CMC163M100BH8 26.4 21.0 10.0 11.2 2 X 2 3/417000 4CMC173M100AD8 24.2 19.3 10.0 11.2 1 3/8 X 4 3/419000 4CMC193M100EJ8 25.6 20.4 10.4 11.7 1 3/4 X 3 3/420000 4CMC203M100AE8 21.9 17.5 11.2 12.6 1 3/8 X 5 1/421000 4CMC213M100BB8 22.9 18.3 11.3 12.6 2 X 3 1/422000 4CMC223M100AF8 20.1 16.0 12.1 13.6 1 3/8 X 5 3/422000 4CMC223M100EC8 21.9 17.5 11.7 13.1 1 3/4 X 4 1/426000 4CMC263M100ED8 19.3 15.4 13.2 14.7 1 3/4 X 4 3/426000 4CMC263M100BJ8 23.6 18.8 12.5 13.9 2 X 3 3/430000 4CMC303M100EE8 17.3 13.8 14.7 16.5 1 3/4 X 5 1/430000 4CMC303M100BC8 20.2 16.1 13.5 15.2 2 X 4 1/433000 4CMC333M100EF8 15.8 12.6 16.4 18.4 1 3/4 X 5 3/435000 4CMC353M100BD8 17.8 14.2 14.9 16.7 2 X 4 3/440000 4CMC403M100BE8 16.1 12.8 16.3 18.2 2 X 5 1/445000 4CMC453M100BF8 14.7 11.7 17.5 19.6 2 X 5 3/4

160 Vdc (200 Vdc Surge)1500 4CMC152M160AK8 81.7 65.2 3.7 4.2 1 3/8 X 1 3/42500 4CMC252M160AA8 51.8 41.3 5.3 6.0 1 3/8 X 2 1/43500 4CMC352M160AH8 37.5 29.9 6.5 7.3 1 3/8 X 2 3/43700 4CMC372M160EA8 47.1 37.5 6.1 6.9 1 3/4 X 2 1/44500 4CMC452M160AB8 29.6 23.6 7.8 8.8 1 3/8 X 3 1/44800 4CMC482M160BA8 35.4 28.2 7.2 8.1 2 X 2 1/45200 4CMC522M160EH8 29.0 23.1 8.3 9.3 1 3/4 X 2 3/45500 4CMC552M160AJ8 23.5 18.7 29.3 32.8 1 3/8 X 3 3/46600 4CMC662M160AC8 20.2 16.1 10.5 11.7 1 3/8 X 4 1/46800 4CMC682M160EB8 22.5 17.9 10.2 11.5 1 3/4 X 3 1/47100 4CMC712M160AD8 18.6 14.8 11.4 12.8 1 3/8 X 4 3/47100 4CMC712M160BH8 26.5 21.2 9.0 10.1 2 X 2 3/48000 4CMC802M160AE8 16.8 13.4 12.6 14.2 1 3/8 X 5 1/48300 4CMC832M160EJ8 18.5 14.7 11.7 13.1 1 3/4 X 3 3/49000 4CMC902M160AF8 19.2 15.3 12.4 13.9 1 3/8 X 5 3/49300 4CMC932M160BB8 20.6 16.4 10.8 12.1 2 X 3 1/4

10000 4CMC1002M160EC8 15.8 12.6 13.1 14.6 1 3/4 X 4 1/411000 4CMC113M160BJ8 16.9 13.5 13.3 14.9 2 X 3 3/412000 4CMC123M160ED8 13.9 11.1 14.7 16.5 1 3/4 X 4 3/413000 4CMC133M160EE8 12.5 9.9 16.5 18.4 1 3/4 X 5 1/413000 4CMC133M160BC8 14.5 11.6 14.5 16.2 2 X 4 1/415000 4CMC153M160EF8 11.4 9.1 18.4 20.6 1 3/4 X 5 3/416000 4CMC163M160BD8 12.8 10.2 15.9 17.8 2 X 4 3/418000 4CMC183M160BE8 11.5 9.2 17.4 19.5 2 X 5 1/420000 4CMC203M160BF8 10.5 8.4 18.8 21.0 2 X 5 3/4

200 Vdc (250 Vdc Surge)1200 4CMC122M200AK8 105.2 60.4 3.1 4.1 1 3/8 X 1 3/41900 4CMC192M200AA8 66.6 38.2 4.5 5.9 1 3/8 X 2 1/42700 4CMC272M200AH8 48.0 27.6 5.4 7.2 1 3/8 X 2 3/42700 4CMC272M200EA8 60.0 34.4 5.3 7.0 1 3/4 X 2 1/43500 4CMC352M200AB8 37.8 21.7 6.6 8.7 1 3/8 X 3 1/43500 4CMC352M200BA8 44.2 30.7 6.6 7.9 2 X 2 1/43700 4CMC372M200EH8 38.1 21.9 6.9 9.1 1 3/4 X 2 3/44300 4CMC432M200AJ8 29.9 17.2 7.8 10.2 1 3/8 X 3 3/4

4800 4CMC482M200EB8 29.4 16.9 8.5 11.2 1 3/4 X 3 1/45000 4CMC502M200BH8 33.1 23.0 8.2 9.8 2 X 2 3/45100 4CMC512M200AC8 25.7 14.7 8.8 11.7 1 3/8 X 4 1/45800 4CMC582M200AD8 22.6 13.0 9.8 12.9 1 3/8 X 4 3/45900 4CMC592M200EJ8 24.1 13.8 9.7 12.7 1 3/4 X 3 3/46600 4CMC662M200AE8 20.3 11.6 10.9 14.4 1 3/8 X 5 1/46800 4CMC682M200BB8 25.6 17.8 9.8 11.8 2 X 3 1/47100 4CMC712M200EC8 20.5 11.8 10.8 14.3 1 3/4 X 4 1/47400 4CMC742M200AF8 23.1 13.3 10.7 14.2 1 3/8 X 5 3/48100 4CMC812M200BJ8 21.0 14.6 12.2 14.6 2 X 3 3/48200 4CMC822M200ED8 17.9 10.3 12.2 16.1 1 3/4 X 4 3/49300 4CMC932M200EE8 16.0 9.2 13.7 18.1 1 3/4 X 5 1/49500 4CMC952M200BC8 19.1 13.3 12.8 15.4 2 X 4 1/4

10000 4CMC103M200EF8 14.5 8.3 15.4 20.3 1 3/4 X 5 3/411000 4CMC113M200BD8 15.7 10.9 14.6 17.5 2 X 4 3/412000 4CMC123M200BE8 14.1 9.8 16.0 19.2 2 X 5 1/414000 4CMC143M200BF8 12.8 8.9 17.3 20.8 2 X 5 3/4

250 Vdc (300 Vdc Surge)890 4CMC891M250AK8 137.0 78.6 2.6 3.4 1 3/8 X 1 3/4

1500 4CMC152M250AA8 86.5 49.7 3.7 4.9 1 3/8 X 2 1/41900 4CMC192M250EA8 68.7 39.4 4.8 6.3 1 3/4 X 2 1/42100 4CMC212M250AH8 62.3 35.7 4.5 6.0 1 3/8 X 2 3/42700 4CMC272M250BA8 54.2 37.6 5.8 7.0 2 X 2 1/42700 4CMC272M250AB8 48.8 28.0 5.5 7.2 1 3/8 X 3 1/42800 4CMC282M250EH8 47.8 27.4 6.1 8.1 1 3/4 X 2 3/43200 4CMC322M250AJ8 38.6 22.1 6.5 8.5 1 3/8 X 3 3/43700 4CMC372M250EB8 36.8 21.1 7.6 10.0 1 3/4 X 3 1/43800 4CMC382M250BH8 40.5 28.1 7.2 8.7 2 X 2 3/43900 4CMC392M250AC8 33.0 18.9 7.4 9.7 1 3/8 X 4 1/44400 4CMC442M250AD8 29.0 16.6 8.2 10.8 1 3/8 X 4 3/44500 4CMC452M250EJ8 30.1 17.3 8.6 11.4 1 3/4 X 3 3/45000 4CMC502M250AE8 25.9 14.9 9.1 12.0 1 3/8 X 5 1/45000 4CMC502M250BB8 31.2 21.7 8.7 10.4 2 X 3 1/45400 4CMC542M250EC8 25.5 14.7 9.7 12.8 1 3/4 X 4 1/45600 4CMC562M250AF8 29.4 16.9 9.0 11.9 1 3/8 X 5 3/46200 4CMC622M250BJ8 25.5 17.7 10.7 12.9 2 X 3 3/46300 4CMC632M250ED8 22.3 12.8 11.0 14.5 1 3/4 X 4 3/47200 4CMC722M250EE8 19.8 11.4 12.3 16.3 1 3/4 X 5 1/47300 4CMC732M250BC8 21.7 15.1 11.7 14.0 2 X 4 1/48100 4CMC812M250EF8 18.0 10.3 13.8 18.3 1 3/4 X 5 3/48500 4CMC852M250BD8 19.0 13.2 12.9 15.5 2 X 4 3/49700 4CMC972M250BE8 17.0 11.8 14.2 17.0 2 X 5 1/4

11000 4CMC113M250BF8 15.4 10.7 15.4 18.4 2 X 5 3/4300 Vdc (350 Vdc Surge)

520 4CMC521M300AK8 245 141 2.2 2.9 1 3/8 X 1 3/4870 4CMC871M300AA8 148 84.7 3.1 4.1 1 3/8 X 2 1/4

1200 4CMC122M300AH8 106 60.7 4.0 5.3 1 3/8 X 2 3/41300 4CMC132M300EA8 111 63.8 4.2 5.5 1 3/4 X 2 1/41600 4CMC162M300BA8 93.2 51.9 5.0 6.7 2 X 2 1/41600 4CMC162M300AB8 82.7 47.5 4.8 6.3 1 3/8 X 3 1/41800 4CMC182M300EH8 99.2 56.9 4.8 6.3 1 3/4 X 2 3/41900 4CMC192M300AJ8 68.0 39.0 5.6 7.4 1 3/8 X 3 3/42200 4CMC222M300BH8 67.1 37.4 6.3 8.4 2 X 2 3/42300 4CMC232M300AC8 57.9 33.2 6.4 8.4 1 3/8 X 4 1/42300 4CMC232M300EB8 76.1 43.7 5.8 7.7 1 3/4 X 3 1/42600 4CMC262M300AD8 50.6 29.0 7.1 9.4 1 3/8 X 4 3/42900 4CMC292M300AE8 45.0 25.8 7.8 10.3 1 3/8 X 5 1/42900 4CMC292M300BB8 51.6 28.7 7.6 10.2 2 X 3 1/4



Alum

inum

Radi

al L

eade

dCa

paci

tors

Type 4CMC, 85 °C, High-Cap, Computer Grade, Radial Leaded




CORNELLDUBILIER


Ratings

2900 4CMC292M300EJ8 61.9 35.5 6.8 8.9 1 3/4 X 3 3/43300 4CMC332M300AF8 50.7 29.1 7.6 10.1 1 3/8 X 5 3/43500 4CMC352M300EC8 52.2 30.0 7.7 10.2 1 3/4 X 4 1/43600 4CMC362M300BJ8 51.2 28.5 8.1 10.8 2 X 3 3/44000 4CMC402M300ED8 45.3 26.0 8.6 11.4 1 3/4 X 4 3/44300 4CMC432M300BC8 43.3 24.1 9.2 12.3 2 X 4 1/44600 4CMC462M300EE8 40.1 23.0 9.5 12.6 1 3/4 X 5 1/44900 4CMC492M300BD8 38.0 21.2 10.2 13.7 2 X 4 3/45100 4CMC512M300EF8 36.0 20.6 10.4 13.7 1 3/4 X 5 3/45700 4CMC572M300BE8 33.3 18.5 11.3 15.1 2 X 5 1/46400 4CMC642M300BF8 29.9 16.7 12.3 16.5 2 X 5 3/4

350 Vdc (400 Vdc Surge)430 4CMC431M350AK8 264.1 151.6 2.1 2.8 1 3/8 X 1 3/4710 4CMC711M350AA8 158.9 91.2 3.1 4.0 1 3/8 X 2 1/4

1000 4CMC102M350EA8 119.2 68.4 4.1 5.4 1 3/4 X 2 1/41000 4CMC102M350AH8 113.9 65.4 3.7 4.9 1 3/8 X 2 3/41200 4CMC122M350BA8 98.1 54.6 4.8 6.4 2 X 2 1/41300 4CMC132M350EH8 105.1 60.3 4.6 6.1 1 3/4 X 2 3/41300 4CMC132M350AB8 89.0 51.1 4.5 6.0 1 3/8 X 3 1/41600 4CMC162M350BH8 71.8 40.0 6.0 8.1 2 X 2 3/41600 4CMC162M350AJ8 73.2 42.0 5.2 6.9 1 3/8 X 3 3/41700 4CMC172M350EB8 80.6 46.3 5.7 7.5 1 3/4 X 3 1/41800 4CMC182M350AC8 62.3 35.8 6.0 7.9 1 3/8 X 4 1/42100 4CMC212M350BB8 55.1 30.7 7.3 9.7 2 X 3 1/42100 4CMC212M350AD8 54.4 31.2 6.7 8.8 1 3/8 X 4 3/42100 4CMC212M350EJ8 65.5 37.6 6.5 8.6 1 3/4 X 3 3/42400 4CMC242M350AE8 48.3 27.7 7.4 9.8 1 3/8 X 5 1/42500 4CMC252M350EC8 55.3 31.7 7.4 9.7 1 3/4 X 4 1/42600 4CMC262M350BJ8 47.9 26.7 8.7 11.7 2 X 3 3/42700 4CMC272M350AF8 54.5 31.3 7.4 9.7 1 3/8 X 5 3/42900 4CMC292M350ED8 47.9 27.5 8.3 11.0 1 3/4 X 4 3/43100 4CMC312M350BC8 45.7 25.5 9.0 12.1 2 X 4 1/43300 4CMC332M350EE8 42.4 24.3 9.4 12.4 1 3/4 X 5 1/43600 4CMC362M350BD8 40.1 22.4 9.9 13.3 2 X 4 3/43700 4CMC372M350EF8 38.0 21.8 10.6 14.0 1 3/4 X 5 3/44200 4CMC422M350BE8 35.1 19.6 11.0 14.7 2 X 5 1/44700 4CMC472M350BF8 31.6 17.6 12.0 16.0 2 X 5 3/4

400 Vdc (450 Vdc Surge)320 4CMC321M400AK2B 382 195 1.7 2.4 1 3/8 X 1 3/4590 4CMC591M400AA2B 212 108 2.6 3.7 1 3/8 X 2 1/4800 4CMC801M400AH2B 156 79.4 3.2 4.5 1 3/8 X 2 3/4840 4CMC841M400EA8 154 78.8 3.6 5.0 1 3/4 X 2 1/4

1000 4CMC102M400BA8 130 72.2 4.2 5.6 2 X 2 1/41000 4CMC102M400AB2B 119 60.9 3.9 5.5 1 3/8 X 3 1/41200 4CMC122M400EH8 107 54.6 4.6 6.4 1 3/4 X 2 3/41300 4CMC132M400AJ2B 96.9 49.5 4.5 6.4 1 3/8 X 3 3/41400 4CMC142M400BH8 93.6 52.1 5.3 7.1 2 X 2 3/41500 4CMC152M400EB8 87.4 44.6 5.5 7.7 1 3/4 X 3 1/41500 4CMC152M400AC2B 81.8 41.7 0.5 0.8 1 3/8 X 4 1/41600 4CMC162M400AD2B 78.6 40.1 5.5 7.8 1 3/8 X 4 3/41800 4CMC182M400EJ8 71.0 36.2 6.3 8.8 1 3/4 X 3 3/41800 4CMC182M400AE2B 69.5 35.4 6.2 8.7 1 3/8 X 5 1/41900 4CMC192M400BB8 71.9 40.0 6.4 8.5 2 X 3 1/42000 4CMC202M400AF2B 77.9 39.7 6.2 8.6 1 3/8 X 5 3/42100 4CMC212M400EC8 59.9 30.5 7.1 9.9 1 3/4 X 4 1/42300 4CMC232M400BJ8 58.4 32.5 7.9 10.6 2 X 3 3/42500 4CMC252M400ED8 51.9 26.5 8.0 11.2 1 3/4 X 4 3/42700 4CMC272M400BC8 49.3 27.5 8.7 11.6 2 X 4 1/4


2900 4CMC292M400EE8 45.8 23.4 9.0 12.7 1 3/4 X 5 1/43200 4CMC322M400EF8 41.1 21.0 10.2 14.3 1 3/4 X 5 3/43200 4CMC322M400BD8 42.8 23.8 9.6 12.9 2 X 4 3/43600 4CMC362M400BE8 37.9 21.1 10.6 14.2 2 X 5 1/44100 4CMC412M400BF8 34.0 18.9 11.5 15.4 2 X 5 3/4

450 Vdc (500 Vdc Surge)330 4CMC331M450AK8 281 143 1.8 2.5 1 3/8 X 1 3/4490 4CMC491M450AA8 188 95.7 2.5 3.4 1 3/8 X 2 1/4600 4CMC601M450AH8 138 70.4 3.0 4.1 1 3/8 X 2 3/4690 4CMC691M450EA8 163 83.3 3.3 4.6 1 3/4 X 2 1/4860 4CMC861M450BA8 116 64.8 4.1 5.6 2 X 2 1/4860 4CMC861M450AB8 106 54.0 3.6 5.1 1 3/8 X 3 1/4930 4CMC931M450EH8 121 61.5 4.1 5.7 1 3/4 X 2 3/4

1000 4CMC102M450AJ8 86.1 43.9 4.2 5.9 1 3/8 X 3 3/41100 4CMC112M450BH8 98.9 55.1 4.8 6.5 2 X 2 3/41200 4CMC122M450EB8 92.4 47.1 5.0 7.0 1 3/4 X 3 1/41200 4CMC122M450AC8 72.7 37.1 4.8 6.8 1 3/8 X 4 1/41300 4CMC132M450AD8 69.9 35.7 5.1 7.2 1 3/8 X 4 3/41500 4CMC152M450BB8 75.9 42.2 5.8 7.8 2 X 3 1/41500 4CMC152M450AE8 61.8 31.5 5.7 8.0 1 3/8 X 5 1/41500 4CMC152M450EJ8 75.1 38.3 5.7 8.0 1 3/4 X 3 3/41600 4CMC162M450AF8 69.3 35.4 5.7 8.0 1 3/8 X 5 3/41800 4CMC182M450EC8 63.3 32.3 6.5 9.1 1 3/4 X 4 1/41900 4CMC192M450BJ8 61.7 34.3 7.2 9.7 2 X 3 3/42100 4CMC212M450ED8 54.8 28.0 7.3 10.3 1 3/4 X 4 3/42200 4CMC222M450BC8 52.1 29.0 7.9 10.6 2 X 4 1/42300 4CMC232M450EE8 48.4 24.7 8.3 11.6 1 3/4 X 5 1/42600 4CMC262M450EF8 43.5 22.2 9.3 13.0 1 3/4 X 5 3/42600 4CMC262M450BD8 45.7 25.4 8.7 11.7 2 X 4 3/43100 4CMC312M450BE8 38.8 21.6 9.8 13.1 2 X 5 1/43400 4CMC342M450BF8 35.0 19.5 10.7 14.3 2 X 5 3/4

500 Vdc (550 Vdc Surge)210 4CMC211M500AK8 487 287 1.5 2.1 1 3/8 X 1 3/4310 4CMC311M500AA8 325 191 2.1 3.0 1 3/8 X 2 1/4440 4CMC441M500EA8 238 140 2.9 4.0 1 3/4 X 2 1/4450 4CMC451M500AH8 225 133 2.6 3.7 1 3/8 X 2 3/4560 4CMC561M500BA8 193 114 3.4 4.6 2 X 2 1/4590 4CMC591M500AB8 173 102 3.2 4.5 1 3/8 X 3 1/4630 4CMC631M500EH8 165 97.2 3.7 5.2 1 3/4 X 2 3/4730 4CMC731M500AJ8 140 82.6 3.8 5.3 1 3/8 X 3 3/4780 4CMC781M500BH8 134 78.7 4.4 5.9 2 X 2 3/4820 4CMC821M500EB8 126 74.4 4.5 6.4 1 3/4 X 3 1/4820 4CMC821M500AC8 125 73.6 4.2 5.9 1 3/8 X 4 1/4900 4CMC901M500AD8 113 66.4 4.6 6.5 1 3/8 X 4 3/4

1000 4CMC102M500BB8 103 60.3 5.3 7.1 2 X 3 1/41000 4CMC102M500AE8 99 58.5 5.2 7.3 1 3/8 X 5 1/41000 4CMC102M500EJ8 103 60.4 5.2 7.3 1 3/4 X 3 3/41100 4CMC112M500AF8 114 67.3 5.1 7.1 1 3/8 X 5 3/41200 4CMC122M500EC8 86.4 50.9 5.9 8.3 1 3/4 X 4 1/41300 4CMC132M500BJ8 83.2 49.0 6.6 8.9 2 X 3 3/41400 4CMC142M500ED8 74.8 44.0 6.7 9.4 1 3/4 X 4 3/41500 4CMC152M500BC8 70.2 41.3 7.3 9.7 2 X 4 1/41600 4CMC162M500EE8 66.0 38.8 7.5 10.6 1 3/4 X 5 1/41800 4CMC182M500EF8 59.1 34.8 8.5 11.9 1 3/4 X 5 3/41800 4CMC182M500BD8 60.7 35.8 8.1 10.8 2 X 4 3/42100 4CMC212M500BE8 52.1 30.7 9.0 12.1 2 X 5 1/42300 4CMC232M500BF8 46.9 27.6 9.8 13.2 2 X 5 3/4


Aluminum



CORNELLDUBILIER



Rated Voltage: 100 to 500 VdcCapacitance: 170 F to 29,000 F 20%

DC Leakage Current: 3 sqrt CV A 4 mA max, 5 min.Cold Impedance: 20 °C multiple of 25 °C Z 4 for 100 V

3 for 150 V & up.Ripple Current Multipliers: Ambient Temperature

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz

100 to 160 V 0.80 0.85 1.00 1.05 1.08 1.08 1.08200 to 350 V 0.80 0.83 1.00 1.15 1.20 1.20 1.20400 to 500 V 0.78 0.80 1.00 1.30 1.40 1.40 1.40

EIA Ripple Life: 3000 h at full load at 85 °C per EIA IS-749 Capacitance 20%ESR 200% of limitDCL 100% of limit

Shelf Life Test: 500 h at 95 °C. Capacitance, ESR and DCL meet initial requirements.Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane.

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C2.00 1.82 1.59 1.33 1.00 0.48

Type 400C, 95 °C, Long-Life, Computer Grade, Radial Leaded

Twice the Life!The Type 400C is the PC-mount equivalent for Type 500Cscrew-terminal computergrade capacitor. It’s for bus filteringapplications where long life is critical like telecom systemsand industrial power supplies. Type 400C delivers 2 to 3times the life of Type 4CMC, and above 250 V it has nearlythe same capacitance. Its extended cathode foil assures cooloperation with heatflow from the capacitor element to thecan in all mounting orientations.

Highlights More than 10 years life in most applications Ripple Currents to > 50 amps at 55 °C 3-leads Printed-circuit mounting Thermal-PakTM extended cathode construction

Alum

inum

Radi

al L

eade

dCa

paci

tors





CORNELLDUBILIER



400C 262 M 100 AK 8

Type Capacitance Tolerance Voltage Case Code Insulation Terminal262 = 2600 F M = 20% 100 = 100 V 0 = bare can (blank) = Straight Leads171 = 170 F T = 10% + 50% 450 = 450 V 8 = PVC L = Lay Down (3 Leads)

U = 10% +75% with Standoffs9 = Polyesterwith Standoffs

Case Dimensions

Case Inches Millimeters

Code D .031 L MAX C .015 S .031 E .031 F.015 D.78 L MAX C.78 S±.78 E.78 F±.38

AK 1.375 1.75 0.50 0.175 0.25 0.55 34.93 44.45 12.70 4.45 6.35 13.97AA 1.375 2.25 0.50 0.175 0.25 0.55 34.93 57.15 12.70 4.45 6.35 13.97AH 1.375 2.75 0.50 0.175 0.25 0.55 34.98 69.85 12.70 4.45 6.35 13.97AB 1.375 3.25 0.50 0.175 0.25 0.55 34.93 82.55 12.70 4.45 6.35 13.97

AJ 1.375 3.75 0.50 0.175 0.25 0.55 34.93 95.25 12.70 4.45 6.35 13.97AC 1.375 4.25 0.50 0.175 0.25 0.55 34.93 107.95 12.70 4.45 6.35 13.97AD 1.375 4.75 0.50 0.175 0.25 0.55 34.93 120.65 12.70 4.45 6.35 13.97AE 1.375 5.25 0.50 0.175 0.25 0.55 34.93 133.35 12.70 4.45 6.35 13.97AF 1.375 5.75 0.50 0.175 0.25 0.55 34.93 146.05 12.70 4.45 6.35 13.97

EA 1.75 2.25 0.70 0.375 0.35 0.90 44.45 57.15 17.78 9.53 8.89 22.86EH 1.75 2.75 0.70 0.375 0.35 0.90 44.45 69.85 17.78 9.53 8.89 22.86EB 1.75 3.25 0.70 0.375 0.35 0.90 44.45 82.55 17.78 9.53 8.89 22.86

EJ 1.75 3.75 0.70 0.375 0.35 0.90 44.45 95.25 17.78 9.53 8.89 22.86EC 1.75 4.25 0.70 0.375 0.35 0.90 44.45 107.95 17.78 9.53 8.89 22.86ED 1.75 4.75 0.70 0.375 0.35 0.90 44.45 120.65 17.78 9.53 8.89 22.86EE 1.75 5.25 0.70 0.375 0.35 0.90 44.45 133.35 17.78 9.53 8.89 22.86EF 1.75 5.75 0.70 0.375 0.35 0.90 44.45 146.05 17.78 9.53 8.89 22.86

BA 2.00 2.25 0.80 0.425 0.40 1.00 50.80 57.15 20.32 10.80 10.16 25.40BH 2.00 2.75 0.80 0.425 0.40 1.00 50.80 69.85 20.32 10.80 10.16 25.40BB 2.00 3.25 0.80 0.425 0.40 1.00 50.80 82.55 20.32 10.80 10.16 25.40

BJ 2.00 3.75 0.80 0.425 0.40 1.00 50.80 95.25 20.32 10.80 10.16 25.40BC 2.00 4.25 0.80 0.425 0.40 1.00 50.80 107.95 20.32 10.80 10.16 25.40BD 2.00 4.75 0.80 0.425 0.40 1.00 50.80 120.65 20.32 10.80 10.16 25.40BE 2.00 5.25 0.80 0.425 0.40 1.00 50.80 133.25 20.32 10.80 10.16 25.40BF 2.00 5.75 0.80 0.425 0.40 1.00 50.80 146.05 20.32 10.80 10.16 25.40

Outline Drawings

++

Laydown Style


Aluminum




CORNELLDUBILIER



Temperature Characteristics - 98,000 F 10 Vdc Temperature Characteristics - 29,000 F 50 Vdc

Temperature Characteristics - 4200 F 100 Vdc

Impedance vs. Frequency

Type 400C Operating Life vs Ripple Current (90% V)

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5


Exp

ecte

d O

pera

ting

Lif

e, k

h 45°C

55°C

65°C

75°C

85°C

Alum

inum

Radi

al L

eade

dCa

paci

tors




CORNELLDUBILIER


Ratings


100 Vdc (125 Vdc Surge)2600 400C262M100AK8 74.0 50.2 3.6 4.5 1 3/8 X 1 3/43800 400C382M100AA8 49.7 33.7 5.0 6.2 1 3/8 X 2 1/45000 400C503M100AH8 36.3 24.6 6.0 7.5 1 3/8 X 2 3/45700 400C572M100EA8 39.7 26.9 6.4 8.0 1 3/4 X 2 1/46800 400C682M100AB8 28.1 19.1 7.4 9.2 1 3/8 X 3 1/47200 400C722M100BA8 36.7 24.9 7.2 9.0 2 X 2 1/47800 400C782M100EH8 28.4 19.3 8.1 10.2 1 3/4 X 2 3/48300 400C832M100AJ8 23.2 15.7 8.5 10.6 1 3/8 X 3 3/49700 400C972M100BH8 26.0 17.7 9.2 11.5 2 X 2 3/49900 400C992M100AC8 19.8 13.5 9.7 12.1 1 3/8 X 4 1/4

10000 400C103M100EB8 22.0 14.9 10.0 12.5 1 3/4 X 3 1/412000 400C123M100AD8 17.5 11.8 10.8 13.5 1 3/8 X 4 3/413000 400C133M100AE8 15.7 10.7 11.9 14.9 1 3/8 X 5 1/413000 400C133M100EJ8 18.1 12.3 11.4 14.2 1 3/4 X 3 3/413000 400C133M100BB8 20.2 13.7 11.0 13.7 2 X 3 1/415000 400C153M100EC8 15.5 10.5 12.7 15.9 1 3/4 X 4 1/415000 400C153M100AF8 17.9 12.2 11.7 14.7 1 3/8 X 5 3/416000 400C163M100BJ8 16.6 11.3 13.6 17.0 2 X 3 3/417000 400C173M100ED8 13.6 9.2 14.3 17.9 1 3/4 X 4 3/419000 400C193M100BC8 14.2 9.7 14.7 18.4 2 X 4 1/420000 400C203M100EE8 12.2 8.3 16.0 20.0 1 3/4 X 5 1/422000 400C223M100EF8 11.1 7.6 17.9 22.4 1 3/4 X 5 3/422000 400C223M100BD8 12.6 8.5 16.2 20.2 2 X 4 3/426000 400C263M100BE8 11.0 7.5 17.9 22.4 2 X 5 1/429000 400C293M100BF8 10.1 6.9 19.4 24.2 2 X 5 3/4

160 Vdc (200 Vdc Surge)1400 400C142M160AK8 88.2 53.9 4.1 5.2 1 3/8 X 1 3/42000 400C202M160AA8 59.5 36.6 5.7 7.2 1 3/8 X 2 1/43000 400C302M160EA8 46.3 32.2 7.1 8.5 1 3/4 X 2 1/43000 400C302M160AH8 42.0 26.1 7.0 8.8 1 3/8 X 2 3/43800 400C382M160AB8 32.8 20.7 8.5 10.6 1 3/8 X 3 1/43800 400C382M160BA8 40.8 30.8 7.7 8.8 2 X 2 1/44100 400C412M160EH8 32.9 22.7 8.9 10.8 1 3/4 X 2 3/44700 400C472M160AJ8 27.2 17.4 9.7 12.2 1 3/8 X 3 3/45100 400C512M160BH8 28.7 21.4 9.8 11.4 2 X 2 3/45400 400C542M160EB8 25.6 17.8 10.9 13.1 1 3/4 X 3 1/45500 400C552M160AC8 23.5 15.3 11.0 13.7 1 3/8 X 4 1/46100 400C612M160AD8 21.5 14.0 12.0 14.9 1 3/8 X 4 3/46700 400C672M160EJ8 21.2 14.9 12.4 14.8 1 3/4 X 3 3/46800 400C682M160BB8 22.4 16.8 11.7 13.6 2 X 3 1/47000 400C702M160AE8 19.5 12.9 13.3 16.3 1 3/8 X 5 1/47700 400C772M160AF8 18.0 12.1 14.5 17.7 1 3/8 X 5 3/48000 400C802M160EC8 18.2 12.9 13.9 16.5 1 3/4 X 4 1/48500 400C852M160BJ8 18.5 14.0 14.5 16.6 2 X 3 3/49200 400C922M160ED8 16.2 11.6 15.5 18.4 1 3/4 X 4 3/4

10000 400C103M160EE8 14.6 10.6 17.3 20.4 1 3/4 X 5 1/410000 400C103M160BC8 16.0 12.2 15.7 18.0 2 X 4 1/412000 400C123M160EF8 13.4 9.9 19.3 22.5 1 3/4 X 5 3/412000 400C123M160BD8 14.2 10.8 17.2 19.6 2 X 4 3/414000 400C143M160BE8 12.5 9.7 18.9 21.4 2 X 5 1/415000 400C153M160BF8 11.6 9.1 20.4 23.0 2 X 5 3/4

200 Vdc(250 Vdc Surge)920 400C921M200AK8 126 71.3 3.4 4.5 1 3/8 X 1 3/4

1400 400C142M200AA8 84.5 48.2 4.7 6.3 1 3/8 X 2 1/42000 400C202M200EA8 61.7 39.3 6.1 7.6 1 3/4 X 2 1/42000 400C202M200AH8 59.3 34.2 5.8 7.7 1 3/8 X 2 3/42600 400C262M200AB8 46.1 26.8 7.1 9.3 1 3/8 X 3 1/42600 400C262M200BA8 51.8 35.9 6.8 8.2 2 X 2 1/42800 400C282M200EH8 44.1 27.9 7.7 9.7 1 3/4 X 2 3/43200 400C322M200AJ8 38.0 22.4 8.2 10.7 1 3/8 X 3 3/43500 400C352M200BH8 36.7 25.1 8.7 10.5 2 X 2 3/4

3700 400C372M200EB8 34.2 21.8 9.5 11.9 1 3/4 X 3 1/43800 400C382M200AC8 32.5 19.5 9.4 12.1 1 3/8 X 4 1/44200 400C422M200AD8 29.8 17.8 10.2 13.2 1 3/8 X 4 3/44500 400C452M200EJ8 28.1 18.1 10.8 13.5 1 3/4 X 3 3/44700 400C472M200BB8 28.5 19.6 10.4 12.5 2 X 3 1/44800 400C482M200AE8 26.8 16.3 11.3 14.5 1 3/8 X 5 1/45300 400C532M200AF8 24.5 15.1 12.4 15.8 1 3/8 X 5 3/45400 400C542M200EC8 24.1 15.6 12.1 15.0 1 3/4 X 4 1/45700 400C572M200BJ8 23.5 16.3 12.8 15.4 2 X 3 3/46300 400C632M200ED8 21.2 13.9 13.6 16.8 1 3/4 X 4 3/46800 400C682M200BC8 20.1 14.1 14.0 16.7 2 X 4 1/47100 400C712M200EE8 19.0 12.6 15.2 18.6 1 3/4 X 5 1/47800 400C782M200BD8 17.8 12.5 15.3 18.3 2 X 4 3/48000 400C802M200EF8 17.4 11.7 17.0 20.7 1 3/4 X 5 3/49300 400C932M200BE8 15.6 11.2 16.9 20.0 2 X 5 1/4

10000 400C103M200BF8 14.3 10.4 18.3 21.5 2 X 5 3/4250 Vdc (300 Vdc Surge)

670 400C671M250AK8 160 87.2 3.0 4.1 1 3/8 X 1 3/41000 400C102M250AH8 75.1 41.5 5.2 7.0 1 3/8 X 2 3/41000 400C102M250AA8 107 58.8 4.2 5.7 1 3/8 X 2 1/41500 400C152M250EA8 75.7 45.9 5.5 7.1 1 3/4 X 2 1/41900 400C192M250AB8 58.2 32.5 6.3 8.5 1 3/8 X 3 1/41900 400C192M250BA8 61.9 40.5 6.2 7.7 2 X 2 1/42000 400C202M250EH8 54.3 32.6 7.0 9.0 1 3/4 X 2 3/42300 400C232M250AJ8 47.8 26.9 7.3 9.8 1 3/8 X 3 3/42500 400C252M250BH8 44.1 28.5 7.9 9.9 2 X 2 3/42700 400C272M250EB8 42.0 25.4 8.5 11.0 1 3/4 X 3 1/42700 400C272M250AC8 40.8 23.3 8.4 11.1 1 3/8 X 4 1/43000 400C302M250AD8 37.3 21.3 9.2 12.1 1 3/8 X 4 3/43300 400C332M250EJ8 34.5 21.0 9.7 12.5 1 3/4 X 3 3/43400 400C342M250BB8 34.1 22.2 9.5 11.8 2 X 3 1/43500 400C352M250AE8 33.4 19.3 10.1 13.3 1 3/8 X 5 1/43800 400C382M250AF8 30.4 17.9 11.2 14.6 1 3/8 X 5 3/43900 400C392M250EC8 29.4 18.1 10.9 13.9 1 3/4 X 4 1/44200 400C422M250BJ8 28.0 18.4 11.8 14.5 2 X 3 3/44600 400C462M250ED8 25.7 16.0 12.3 15.6 1 3/4 X 4 3/44900 400C492M250BC8 23.9 15.9 12.8 15.7 2 X 4 1/45100 400C512M250EE8 23.0 14.5 13.8 17.4 1 3/4 X 5 1/45700 400C572M250BD8 21.1 14.1 14.1 17.2 2 X 4 3/45800 400C582M250EF8 21.0 13.3 15.4 19.4 1 3/4 X 5 3/46800 400C682M250BE8 18.4 12.5 15.6 19.0 2 X 5 1/47500 400C752M250BF8 16.8 11.5 16.9 20.4 2 X 5 3/4

300 Vdc (350 Vdc Surge)490 400C491M300AK8 240 118 2.2 3.1 1 3/8 X 1 3/4740 400C741M300AA8 161 79.4 3.1 4.4 1 3/8 X 2 1/4

1000 400C102M300AH8 112 55.8 3.8 5.4 1 3/8 X 2 3/41200 400C122M300EA8 102 51.5 4.4 6.2 1 3/4 X 2 1/41400 400C142M300AB8 86.2 43.4 4.7 6.6 1 3/8 X 3 1/41500 400C152M300BA8 92.1 47.2 5.0 7.0 2 X 2 1/41700 400C172M300EH8 75.0 36.9 5.5 7.8 1 3/4 X 2 3/41700 400C172M300AJ8 70.3 35.9 5.4 7.6 1 3/8 X 3 3/42000 400C202M300AC8 59.6 30.8 6.2 8.6 1 3/8 X 4 1/42100 400C212M300BH8 66.1 33.3 6.4 9.0 2 X 2 3/42200 400C222M300EB8 57.7 28.7 6.7 9.5 1 3/4 X 3 1/42400 400C242M300AD8 51.9 27.3 6.9 9.5 1 3/8 X 4 3/42700 400C272M300AE8 46.1 24.6 7.7 10.5 1 3/8 X 5 1/42700 400C272M300EJ8 47.1 23.7 7.7 10.8 1 3/4 X 3 3/42800 400C282M300BB8 50.9 25.9 7.7 10.7 2 X 3 1/43000 400C302M300AF8 41.6 22.6 8.5 11.6 1 3/8 X 5 3/43200 400C322M300EC8 41.6 21.2 8.6 12.1 1 3/4 X 4 1/43400 400C342M300BJ8 41.6 21.4 9.5 13.2 2 X 3 3/43800 400C382M300ED8 36.2 18.7 9.8 13.6 1 3/4 X 4 3/4

ESR Max. 25 °C Ripple Amps, 85 °C Nom SizeCap. Catalog 120 Hz 10 kHz 120 Hz 10 kHz D X L (in)F Number (mΩ) (mΩ) (A) (A) (in)


Aluminum



CORNELLDUBILIER


Ratings


4100 400C412M300BC8 35.9 18.4 10.3 14.3 2 X 4 1/44200 400C422M300EE8 32.2 16.9 11.0 15.2 1 3/4 X 5 1/44700 400C472M300BD8 31.1 16.3 11.4 15.7 2 X 4 3/44800 400C482M300EF8 29.1 15.5 12.3 16.9 1 3/4 X 5 3/45600 400C562M300BE8 26.7 14.4 12.7 17.3 2 X 5 1/46200 400C622M300BF8 24.3 13.2 13.8 18.7 2 X 5 3/4

350 Vdc (400 Vdc Surge)360 400C361M350AK8 295 138 2.0 2.9 1 3/8 X 1 3/4540 400C541M350AA8 197 92.9 2.8 4.0 1 3/8 X 2 1/4800 400C801M350AH8 137 65.1 3.4 5.0 1 3/8 X 2 3/4920 400C921M350EA8 123 58.2 4.0 5.8 1 3/4 X 2 1/4

1000 400C102M350AB8 105 50.6 4.2 6.1 1 3/8 X 3 1/41100 400C112M350BA8 109 52.4 4.6 6.6 2 X 2 1/41200 400C122M350EH8 90.5 41.9 5.0 7.3 1 3/4 X 2 3/41200 400C122M350AJ8 85.8 41.7 4.9 7.0 1 3/8 X 3 3/41500 400C152M350BH8 78.6 37.1 5.8 8.5 2 X 2 3/41500 400C152M350AC8 72.6 35.7 5.6 8.0 1 3/8 X 4 1/41600 400C162M350EB8 69.5 32.5 6.1 8.9 1 3/4 X 3 1/41700 400C172M350AD8 63.1 31.4 6.3 8.9 1 3/8 X 4 3/42000 400C202M350EJ8 56.7 26.8 7.0 10.2 1 3/4 X 3 3/42000 400C202M350BB8 60.5 28.8 7.0 10.2 2 X 3 1/42000 400C202M350AE8 55.9 28.3 7.0 9.8 1 3/8 X 5 1/42200 400C222M350AF8 50.4 25.9 7.7 10.8 1 3/8 X 5 3/42400 400C242M350EC8 49.9 23.9 7.9 11.4 1 3/4 X 4 1/42500 400C252M350BJ8 49.4 23.8 8.7 12.6 2 X 3 3/42800 400C282M350ED8 43.4 21.0 8.9 12.8 1 3/4 X 4 3/43000 400C302M350BC8 42.5 20.4 9.4 13.6 2 X 4 1/43100 400C312M350EE8 38.5 18.9 10.0 14.3 1 3/4 X 5 1/43400 400C342M350BD8 36.8 18.0 10.5 15.0 2 X 4 3/43500 400C352M350EF8 34.7 17.3 11.3 16.0 1 3/4 X 5 3/44100 400C412M350BE8 31.5 15.8 11.7 16.5 2 X 5 1/44500 400C452M350BF8 28.6 14.5 12.7 17.9 2 X 5 3/4

400 Vdc (450 Vdc Surge)300 400C301M400AK8 341 116 1.8 3.2 1 3/8 X 1 3/4450 400C451M400AA8 228 77.7 2.6 4.4 1 3/8 X 2 1/4600 400C601M400AH8 158 54.4 3.2 5.4 1 3/8 X 2 3/4750 400C751M400EA8 141 54.8 3.7 6.0 1 3/4 X 2 1/4840 400C841M400AB8 122 42.2 3.9 6.6 1 3/8 X 3 1/4930 400C931M400BA8 124 52.5 4.3 6.6 2 X 2 1/4

1000 400C102M400AJ8 99 34.7 4.6 7.7 1 3/8 X 3 3/41000 400C102M400EH8 104 39.6 4.6 7.5 1 3/4 X 2 3/41200 400C122M400AC8 83.6 29.7 5.2 8.8 1 3/8 X 4 1/41300 400C132M400EB8 79.5 30.7 5.7 9.2 1 3/4 X 3 1/41300 400C132M400BH8 89.3 37.2 5.5 8.5 2 X 2 3/41400 400C142M400AD8 72.6 26.1 5.8 9.8 1 3/8 X 4 3/41600 400C162M400AE8 64.3 23.4 6.5 10.8 1 3/8 X 5 1/41600 400C162M400EJ8 64.7 25.2 6.6 10.5 1 3/4 X 3 3/41700 400C172M400BB8 68.6 28.9 6.6 10.2 2 X 3 1/41800 400C182M400AF8 57.8 21.4 7.2 11.9 1 3/8 X 5 3/42000 400C202M400EC8 57.0 22.4 7.4 11.8 1 3/4 X 4 1/42100 400C212M400BJ8 55.9 23.8 8.2 12.6 2 X 3 3/42300 400C232M400ED8 49.5 19.7 8.4 13.2 1 3/4 X 4 3/42400 400C242M400BC8 48.2 20.3 8.9 13.7 2 X 4 1/42600 400C262M400EE8 43.9 17.7 9.4 14.8 1 3/4 X 5 1/42800 400C282M400BD8 41.6 18.0 9.9 15.0 2 X 4 3/42900 400C292M400EF8 39.5 16.1 10.6 16.6 1 3/4 X 5 3/43400 400C342M400BE8 35.6 15.7 11.0 16.6 2 X 5 1/43700 400C372M400BF8 32.2 14.4 12.0 17.9 2 X 5 3/4

450 Vdc (500 Vdc Surge)250 400C251M450AK8 367 123 1.8 3.1 1 3/8 X 1 3/4370 400C371M450AA8 245 82.6 2.5 4.3 1 3/8 X 2 1/4500 400C501M450AH8 170 57.8 3.1 5.3 1 3/8 X 2 3/4630 400C631M450EA8 151 57.6 3.6 5.8 1 3/4 X 2 1/4700 400C701M450AB8 131 44.8 3.8 6.5 1 3/8 X 3 1/4780 400C781M450BA8 132 54.8 4.2 6.5 2 X 2 1/4850 400C851M450AJ8 107 36.8 4.4 7.5 1 3/8 X 3 3/4850 400C851M450EH8 111 41.7 4.5 7.3 1 3/4 X 2 3/4

1000 400C102M450AC8 89.9 31.4 5.0 8.5 1 3/8 X 4 1/41000 400C102M450BH8 95.4 38.9 5.3 8.3 2 X 2 3/41100 400C112M450EB8 85.3 32.2 5.5 9.0 1 3/4 X 3 1/41200 400C122M450AD8 78.0 27.6 5.6 9.5 1 3/8 X 4 3/41400 400C142M450AE8 69.1 24.7 6.3 10.5 1 3/8 X 5 1/41400 400C142M450EJ8 69.4 26.5 6.3 10.2 1 3/4 X 3 3/41400 400C142M450BB8 73.3 30.2 6.4 9.9 2 X 3 1/41500 400C152M450AF8 62.1 22.5 7.0 11.6 1 3/8 X 5 3/41600 400C162M450EC8 61.1 23.5 7.1 11.5 1 3/4 X 4 1/41700 400C172M450BJ8 59.7 24.8 7.9 12.3 2 X 3 3/41900 400C192M450ED8 53.0 20.7 8.1 12.9 1 3/4 X 4 3/42000 400C202M450BC8 51.4 21.2 8.6 13.4 2 X 4 1/42100 400C212M450EE8 46.9 18.5 9.1 14.5 1 3/4 X 5 1/42400 400C242M450EF8 42.2 16.9 10.2 16.2 1 3/4 X 5 3/42400 400C242M450BD8 44.4 18.8 9.5 14.7 2 X 4 3/42800 400C282M450BE8 37.9 16.4 10.7 16.3 2 X 5 1/43100 400C312M450BF8 34.3 15.0 11.6 17.6 2 X 5 3/4

500 Volts (550 Volts Surge)170 400C171M500AK8 403 147 1.7 2.8 1 3/8 X 1 3/4260 400C261M500AA8 269 98.6 2.4 3.9 1 3/8 X 2 1/4380 400C381M500AH8 187 68.9 2.9 4.8 1 3/8 X 2 3/4400 400C401M500EA8 241 137 3.3 5.3 1 3/4 X 2 1/4490 400C491M500AB8 144 53.2 3.6 5.9 1 3/8 X 3 1/4510 400C511M500BA8 192 116 3.9 6.1 2 X 2 1/4580 400C581M500EH8 167 95.8 4.2 6.8 1 3/4 X 2 3/4610 400C611M500AJ8 117 43.6 4.2 6.9 1 3/8 X 3 3/4710 400C711M500BH8 133 80.8 5.1 7.8 2 X 2 3/4720 400C721M500AC8 133 77.5 4.8 7.8 1 3/8 X 4 1/4760 400C761M500EB8 129 74.0 5.2 8.3 1 3/4 X 3 1/4800 400C801M500AD8 85.8 32.6 5.4 8.7 1 3/8 X 4 3/4940 400C941M500EJ8 105 60.6 6.0 9.5 1 3/4 X 3 3/4950 400C951M500AE8 75.9 29.1 6.0 9.7 1 3/8 X 5 1/4960 400C961M500BB8 103 62.5 6.1 9.4 2 X 3 1/4

1100 400C112M500AF8 68.3 26.4 6.6 10.7 1 3/8 X 5 3/41100 400C112M500EC8 88.4 51.7 6.8 10.7 1 3/4 X 4 1/41200 400C122M500BJ8 83.5 51.3 7.5 11.6 2 X 3 3/41300 400C132M500ED8 76.7 45.2 7.6 12.0 1 3/4 X 4 3/41400 400C142M500BC8 70.7 43.8 8.2 12.6 2 X 4 1/41500 400C152M500EE8 68.0 40.5 8.6 13.5 1 3/4 X 5 1/41600 400C162M500BD8 61.5 38.4 9.1 13.9 2 X 4 3/41700 400C172M500EF8 61.2 36.8 9.7 15.1 1 3/4 X 5 3/41900 400C192M500BE8 53.1 33.6 10.2 15.4 2 X 5 1/42100 400C212M500BF8 48.0 30.7 11.1 16.7 2 X 5 3/4






CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors

Type 420C, 85 °C, Long-Life, Inverter Grade, Radial Leaded

Best Value High Ripple Type Plug-in

Type 420C is the PC-mount version of the Type 520C screw-terminal, computergrade capacitor and the 85 °C version ofthe Type 450C Inverter Grade capacitor. It delivers the ripple-current capability and exceptional life needed for motor-drivebus capacitors and approaches the performance of the 450C ata lower cost. The extended cathode foil of the 420C assurescool operation and heat flow from the capacitor element tothe can in all orientations.

Highlights New type For motor drives and UPS systems ESRs to 6.9 mΩ Printed-circuit mounting Thermal-Pak™ extended cathode construction

SpecificationsOperating Temperature: –40 °C to 85 °C


DC Leakage Current: ≤ 3 —CV µA, 4 mA max, 5 minutesCold Impedance: 20 °C multiple of 25 °C Z ≤ 3


50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz1 3/8” & 1 3/4” Diameters100 to 350 V 0.91 0.93 1.00 1.06 1.08 1.09 1.09400 to 500 V 0.82 0.86 1.00 1.14 1.20 1.23 1.232” Diameters100 to 350 V 0.92 0.94 1.00 1.05 1.07 1.08 1.08400 to 500 V 0.82 0.86 1.00 1.14 1.20 1.23 1.27

45 °C 55 °C 65 °C 75 °C 85 °C1.80 1.63 1.45 1.25 1.00

Frequency

EIA Ripple Life: 4000 h at full load at 85 °C∆ capacitance ± 20%ESR 200 % of limitDCL 100 % of limit

Shelf Life Test: 500 h at 105 °C. Capacitance, ESR and DCL meet initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane


420C 242 M 100 AK 8

Type Capacitance Tolerance Voltage Case Code Insulation Terminal242 = 2400 F M = 20% 100 = 100 V 0 = bare can (blank) = Straight Leads221 = 220 F T = 10% +50% 450 = 450 V 8 = PVC and Standoffs L = Lay Down 3 Leads

U = 50% +75% 9 = Polyester and Standoffs


CORNELLDUBILIER


Aluminum



ESR Max. 25 °C Ripple Amps, 85 °C Nom SizeCap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D X LF Number (mΩ) (mΩ) (A) (A) (in)


100 Vdc (125 Vdc Surge)2400 420C242M100AK8 74.6 50.6 3.8 4.8 1 3/8 X 1 3/43600 420C362M100AA8 50.1 34.0 5.3 6.7 1 3/8 X 2 1/45000 420C502M100AH8 36.6 24.8 6.4 8.1 1 3/8 X 2 3/45300 420C532M100EA8 39.9 27.1 6.9 8.6 1 3/4 X 2 1/46400 420C642M100AB8 28.4 19.3 7.9 9.8 1 3/8 X 3 1/46800 420C682M100BA8 36.9 25.1 7.7 9.6 2 X 2 1/47300 420C732M100EH8 28.6 19.4 8.7 10.9 1 3/4 X 2 3/47800 420C782M100AJ8 23.4 15.9 9.1 11.4 1 3/8 X 3 3/49100 420C912M100BH8 26.2 17.8 9.8 12.3 2 X 2 3/49300 420C932M100AC8 20.0 13.6 10.4 12.9 1 3/8 X 4 1/49600 420C962M100EB8 22.2 15.0 10.7 13.3 1 3/4 X 3 1/4

11000 420C113M100AD8 17.6 11.9 11.5 14.4 1 3/8 X 4 3/412000 420C123M100AE8 15.8 10.7 12.8 15.9 1 3/8 X 5 1/412000 420C123M100EJ8 18.2 12.4 12.2 15.2 1 3/4 X 3 3/412000 420C123M100BB8 20.3 13.8 11.8 14.7 2 X 3 1/414000 420C143M100EC8 15.6 10.6 13.6 17.0 1 3/4 X 4 1/414000 420C143M100AF8 18.1 12.3 12.5 15.7 1 3/8 X 5 3/415000 420C153M100BJ8 16.7 11.4 14.5 18.2 2 X 3 3/416000 420C163M100ED8 13.7 9.3 15.3 19.2 1 3/4 X 4 3/418000 420C183M100EE8 12.3 8.3 17.1 21.4 1 3/4 X 5 1/418000 420C183M100BC8 14.3 9.7 15.8 19.7 2 X 4 1/420000 420C203M100BD8 12.7 8.6 17.3 21.7 2 X 4 3/421000 420C213M100EF8 11.2 7.6 19.2 24.0 1 3/4 X 5 3/424000 420C243M100BE8 11.1 7.5 19.2 24.0 2 X 5 1/427000 420C273M100BF8 10.2 6.9 20.7 25.9 2 X 5 3/4

160 Vdc (200 Vdc Surge)1300 420C132M160AK8 94.8 57.0 4.2 5.4 1 3/8 X 1 3/41900 420C192M160AA8 63.9 38.7 5.9 7.5 1 3/8 X 2 1/42800 420C282M160EA8 49.0 33.4 7.4 8.9 1 3/4 X 2 1/43000 420C302M160AH8 45.0 27.5 7.2 9.2 1 3/8 X 2 3/43600 420C362M160AB8 35.1 21.8 8.8 11.1 1 3/8 X 3 1/43600 420C362M160BA8 42.8 31.7 8.0 9.3 2 X 2 1/43900 420C392M160EH8 34.9 23.6 9.3 11.3 1 3/4 X 2 3/44400 420C442M160AJ8 29.1 18.3 10.1 12.7 1 3/8 X 3 3/44800 420C482M160BH8 30.1 22.1 10.3 12.1 2 X 2 3/45100 420C512M160EB8 27.1 18.5 11.4 13.8 1 3/4 X 3 1/45200 420C522M160AC8 25.1 16.0 11.5 14.4 1 3/8 X 4 1/45700 420C572M160AD8 23.0 14.7 12.5 15.7 1 3/8 X 4 3/46300 420C632M160EJ8 22.4 15.4 13.0 15.6 1 3/4 X 3 3/46400 420C642M160BB8 23.5 17.3 12.3 14.4 2 X 3 1/46600 420C662M160AE8 20.8 13.5 13.8 17.1 1 3/8 X 5 1/47200 420C722M160AF8 19.2 12.7 15.1 18.6 1 3/8 X 5 3/47400 420C742M160EC8 19.3 13.4 14.5 17.4 1 3/4 X 4 1/47900 420C792M160BJ8 19.4 14.4 15.2 17.6 2 X 3 3/48600 420C862M160ED8 17.0 12.0 16.3 19.4 1 3/4 X 4 3/49300 420C932M160BC8 16.7 12.5 16.5 19.0 2 X 4 1/49700 420C972M160EE8 15.4 10.9 18.1 21.5 1 3/4 X 5 1/4

11000 420C113M160EF8 14.1 10.2 20.2 23.8 1 3/4 X 5 3/411000 420C113M160BD8 14.8 11.1 18.1 20.8 2 X 4 3/413000 420C133M160BE8 13.1 10.0 19.9 22.7 2 X 5 1/414000 420C143M160BF8 12.1 9.3 21.4 24.4 2 X 5 3/4

200 Vdc (250 Vdc Surge)900 420C901M200AK8 130 73.4 3.6 4.8 1 3/8 X 1 3/4


3600 420C362M200EB8 35.2 22.3 10.0 12.6 1 3/4 X 3 1/43700 420C372M200AC8 33.6 20.0 9.9 12.9 1 3/8 X 4 1/44100 420C412M200AD8 30.8 18.3 10.8 14.0 1 3/8 X 4 3/44400 420C442M200EJ8 29.0 18.5 11.4 14.3 1 3/4 X 3 3/44500 420C452M200BB8 29.3 20.0 11.0 13.4 2 X 3 1/44700 420C472M200AE8 27.7 16.7 12.0 15.4 1 3/8 X 5 1/45100 420C512M200AF8 25.3 15.5 13.2 16.8 1 3/8 X 5 3/45300 420C532M200EC8 24.8 16.0 12.8 15.9 1 3/4 X 4 1/45600 420C562M200BJ8 24.1 16.6 13.6 16.4 2 X 3 3/46100 420C612M200ED8 21.8 14.2 14.4 17.8 1 3/4 X 4 3/46600 420C662M200BC8 20.6 14.3 14.8 17.8 2 X 4 1/46900 420C692M200EE8 19.6 12.9 16.1 19.8 1 3/4 X 5 1/47600 420C762M200BD8 18.2 12.7 16.3 19.5 2 X 4 3/47800 420C782M200EF8 17.9 11.9 18.0 22.0 1 3/4 X 5 3/49100 420C912M200BE8 16.0 11.3 18.0 21.3 2 X 5 1/4

10000 420C103M200BF8 14.7 10.5 19.4 23.0 2 X 5 3/4250 Vdc (300 Vdc Surge)

600 420C601M250AK8 176 75.9 3.1 4.7 1 3/8 X 1 3/4900 420C901M250AA8 118 51.3 4.3 6.6 1 3/8 X 2 1/4

1000 420C102M250AH8 82.6 36.3 5.3 8.0 1 3/8 X 2 3/41300 420C132M250EA8 82.3 41.2 5.7 8.0 1 3/4 X 2 1/41700 420C172M250AB8 63.8 28.4 6.5 9.8 1 3/8 X 3 1/41700 420C172M250BA8 66.6 37.2 6.4 8.6 2 X 2 1/41800 420C182M250EH8 59.1 29.2 7.2 10.2 1 3/4 X 2 3/42000 420C202M250AJ8 52.4 23.7 7.5 11.2 1 3/8 X 3 3/42300 420C232M250BH8 47.5 26.1 8.2 11.1 2 X 2 3/42400 420C242M250EB8 45.7 22.8 8.8 12.4 1 3/4 X 3 1/42400 420C242M250AC8 44.6 20.6 8.6 12.7 1 3/8 X 4 1/42700 420C272M250AD8 40.8 18.8 9.4 13.8 1 3/8 X 4 3/42900 420C292M250EJ8 37.4 18.9 10.0 14.1 1 3/4 X 3 3/43000 420C302M250BB8 36.7 20.4 9.8 13.2 2 X 3 1/43100 420C312M250AE8 36.5 17.2 10.4 15.2 1 3/8 X 5 1/43400 420C342M250AF8 33.2 15.9 11.5 16.6 1 3/8 X 5 3/43500 420C352M250EC8 31.9 16.3 11.3 15.8 1 3/4 X 4 1/43700 420C372M250BJ8 30.1 16.9 12.2 16.3 2 X 3 3/44100 420C412M250ED8 27.9 14.5 12.7 17.6 1 3/4 X 4 3/44400 420C442M250BC8 25.7 14.6 13.3 17.6 2 X 4 1/44600 420C462M250EE8 24.9 13.2 14.2 19.6 1 3/4 X 5 1/45100 420C512M250BD8 22.7 13.0 14.6 19.3 2 X 4 3/45200 420C522M250EF8 22.6 12.2 16.0 21.8 1 3/4 X 5 3/46000 420C602M250BE8 19.7 11.5 16.2 21.2 2 X 5 1/46700 420C672M250BF8 18.0 10.7 17.5 22.8 2 X 5 3/4

300 Vdc (350 Vdc Surge)450 420C451M300AK8 262 126 2.3 3.3 1 3/8 X 1 3/4680 420C681M300AA8 175 84.7 3.2 4.5 1 3/8 X 2 1/4

1000 420C102M300AH8 122 59.5 3.9 5.6 1 3/8 X 2 3/41100 420C112M300EA8 111 54.1 4.5 6.5 1 3/4 X 2 1/41300 420C132M300AB8 93.7 46.2 4.8 6.8 1 3/8 X 3 1/41400 420C142M300BA8 98.9 49.3 5.2 7.4 2 X 2 1/41500 420C152M300AJ8 76.4 38.2 5.6 7.9 1 3/8 X 3 3/41500 420C152M300EH8 81.1 38.9 5.6 8.1 1 3/4 X 2 3/41800 420C182M300AC8 64.7 32.7 6.4 9.0 1 3/8 X 4 1/41900 420C192M300BH8 71.0 34.8 6.6 9.4 2 X 2 3/42000 420C202M300EB8 62.4 30.2 6.9 10.0 1 3/4 X 3 1/42200 420C222M300AD8 56.3 28.9 7.1 10.0 1 3/8 X 4 3/42500 420C252M300AE8 49.9 26.1 7.9 11.0 1 3/8 X 5 1/42500 420C252M300EJ8 50.9 24.9 7.9 11.3 1 3/4 X 3 3/42600 420C262M300BB8 54.7 27.1 7.9 11.3 2 X 3 1/42700 420C272M300AF8 45.0 23.9 8.8 12.1 1 3/8 X 5 3/43000 420C302M300EC8 44.9 22.2 8.9 12.7 1 3/4 X 4 1/43200 420C322M300BJ8 44.7 22.3 9.8 13.9 2 X 3 3/43400 420C342M300ED8 39.0 19.6 10.1 14.3 1 3/4 X 4 3/4

Ratings




CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors





350 Vdc (400 Vdc Surge)350 420C351M350AK8 301 141 2.1 3.1 1 3/8 X 1 3/4520 420C521M350AA8 201 94.4 3.0 4.3 1 3/8 X 2 1/4700 420C701M350AH8 140 66.2 3.6 5.3 1 3/8 X 2 3/4880 420C881M350EA8 126 58.9 4.2 6.2 1 3/4 X 2 1/4980 420C981M350AB8 107 51.4 4.5 6.5 1 3/8 X 3 1/4

1100 420C112M350BA8 111 53.0 4.9 7.1 2 X 2 1/41200 420C122M350EH8 92.2 42.5 5.3 7.8 1 3/4 X 2 3/41200 420C122M350AJ8 87.5 42.3 5.2 7.5 1 3/8 X 3 3/41400 420C142M350AC8 74.0 36.2 6.0 8.5 1 3/8 X 4 1/41500 420C152M350EB8 70.9 33.0 6.5 9.5 1 3/4 X 3 1/41500 420C152M350BH8 80.0 37.5 6.2 9.1 2 X 2 3/41700 420C172M350AD8 64.3 31.9 6.7 9.5 1 3/8 X 4 3/41900 420C192M350EJ8 57.7 27.1 7.5 10.9 1 3/4 X 3 3/41900 420C192M350AE8 57.0 28.7 7.4 10.5 1 3/8 X 5 1/42000 420C202M350BB8 61.6 29.1 7.5 10.9 2 X 3 1/42100 420C212M350AF8 51.3 26.2 8.2 11.5 1 3/8 X 5 3/42300 420C232M350EC8 50.9 24.2 8.4 12.2 1 3/4 X 4 1/42400 420C242M350BJ8 50.2 24.0 9.3 13.4 2 X 3 3/42600 420C262M350ED8 44.2 21.3 9.5 13.7 1 3/4 X 4 3/42800 420C282M350BC8 43.3 20.6 10.1 14.6 2 X 4 1/43000 420C302M350EE8 39.2 19.1 10.7 15.3 1 3/4 X 5 1/43300 420C332M350BD8 37.4 18.2 11.2 16.0 2 X 4 3/43400 420C342M350EF8 35.3 17.5 12.0 17.1 1 3/4 X 5 3/43900 420C392M350BE8 32.1 16.0 12.5 17.7 2 X 5 1/44300 420C432M350BF8 29.0 14.7 13.6 19.1 2 X 5 3/4

400 Vdc (450 Vdc Surge)290 420C291M400AK8 341 155 2.0 2.9 1 3/8 X 1 3/4440 420C441M400AA8 228 104 2.8 4.1 1 3/8 X 2 1/4600 420C601M400AH8 158 73.0 3.4 5.0 1 3/8 X 2 3/4740 420C741M400EA8 141 63.9 4.0 5.9 1 3/4 X 2 1/4830 420C831M400AB8 122 56.6 4.2 6.2 1 3/8 X 3 1/4920 420C921M400BA8 124 56.8 4.6 6.9 2 X 2 1/4

1000 420C102M400EH8 104 46.2 5.0 7.5 1 3/4 X 2 3/41000 420C102M400AJ8 98.9 46.5 4.9 7.1 1 3/8 X 3 3/41200 420C122M400BH8 89.3 40.3 5.9 8.8 2 X 2 3/41200 420C122M400AC8 83.6 39.8 5.6 8.1 1 3/8 X 4 1/41300 420C132M400EB8 79.5 35.8 6.1 9.2 1 3/4 X 3 1/41400 420C142M400AD8 72.6 35.0 6.3 9.1 1 3/8 X 4 3/41600 420C162M400AE8 64.3 31.4 7.0 10.0 1 3/8 X 5 1/41600 420C162M400EJ8 64.7 29.4 7.0 10.4 1 3/4 X 3 3/41700 420C172M400BB8 68.6 31.3 7.1 10.5 2 X 3 1/41800 420C182M400AF8 57.8 28.7 7.8 11.0 1 3/8 X 5 3/41900 420C192M400EC8 57.0 26.2 7.9 11.7 1 3/4 X 4 1/42000 420C202M400BJ8 55.9 25.7 8.8 13.0 2 X 3 3/42200 420C222M400ED8 49.5 23.0 9.0 13.2 1 3/4 X 4 3/42400 420C242M400BC8 48.2 22.0 9.5 14.1 2 X 4 1/42500 420C252M400EE8 43.9 20.6 10.1 14.7 1 3/4 X 5 1/42800 420C282M400EF8 39.5 18.8 11.4 16.5 1 3/4 X 5 3/42800 420C282M400BD8 41.6 19.5 10.6 15.5 2 X 4 3/43300 420C332M400BE8 35.6 17.0 11.8 17.1 2 X 5 1/43700 420C372M400BF8 32.2 15.6 12.9 18.5 2 X 5 3/4

450 Volts (500 Volts Surge)220 420C221M450AK8 383 171 1.9 2.8 1 3/8 X 1 3/4330 420C331M450AA8 256 115 2.6 3.9 1 3/8 X 2 1/4

500 420C501M450AH8 178 80.3 3.2 4.8 1 3/8 X 2 3/4570 420C571M450EA8 157 69.1 3.8 5.7 1 3/4 X 2 1/4630 420C631M450AB8 137 62.2 4.0 5.9 1 3/8 X 3 1/4700 420C701M450BA8 138 60.9 4.4 6.6 2 X 2 1/4760 420C761M450EH8 116 50.1 4.7 7.2 1 3/4 X 2 3/4760 420C761M450AJ8 111 51.1 4.6 6.8 1 3/8 X 3 3/4910 420C911M450AC8 93.8 43.6 5.3 7.8 1 3/8 X 4 1/4940 420C941M450BH8 99.1 43.3 5.6 8.5 2 X 2 3/4

1000 420C102M450EB8 88.8 38.8 5.8 8.8 1 3/4 X 3 1/41100 420C112M450AD8 81.4 38.2 5.9 8.7 1 3/8 X 4 3/41200 420C122M450EJ8 72.2 31.8 6.7 10.0 1 3/4 X 3 3/41200 420C122M450AE8 72.0 34.3 6.6 9.6 1 3/8 X 5 1/41300 420C132M450AF8 64.7 31.2 7.3 10.6 1 3/8 X 5 3/41300 420C132M450BB8 76.1 33.5 6.7 10.1 2 X 3 1/41500 420C152M450EC8 63.5 28.3 7.5 11.3 1 3/4 X 4 1/41600 420C162M450BJ8 62.0 27.6 8.3 12.5 2 X 3 3/41700 420C172M450ED8 55.1 24.8 8.5 12.7 1 3/4 X 4 3/41800 420C182M450BC8 53.3 23.6 9.1 13.6 2 X 4 1/41900 420C192M450EE8 48.8 22.2 9.6 14.2 1 3/4 X 5 1/42100 420C212M450BD8 46.1 20.8 10.1 15.0 2 X 4 3/42200 420C222M450EF8 43.9 20.3 10.8 15.9 1 3/4 X 5 3/42500 420C252M450BE8 39.3 18.2 11.3 16.6 2 X 5 1/42800 420C282M450BF8 35.5 16.6 12.3 17.9 2 X 5 3/4

500 Vdc (550 Vdc Surge)160 420C161M500AK8 416 151 1.8 3.0 1 3/8 X 1 3/4240 420C241M500AA8 278 101 2.5 4.2 1 3/8 X 2 1/4350 420C351M500AH8 193 70.5 3.1 5.1 1 3/8 X 2 3/4370 420C371M500EA8 248 140 3.5 5.6 1 3/4 X 2 1/4460 420C461M500AB8 148 54.5 3.8 6.3 1 3/8 X 3 1/4480 420C481M500BA8 197 118 4.1 6.5 2 X 2 1/4540 420C541M500EH8 172 97.8 4.5 7.2 1 3/4 X 2 3/4570 420C571M500AJ8 121 44.6 4.4 7.3 1 3/8 X 3 3/4670 420C671M500BH8 137 82.3 5.4 8.3 2 X 2 3/4670 420C671M500AC8 137 79.3 5.1 8.3 1 3/8 X 4 1/4710 420C711M500EB8 132 75.5 5.5 8.8 1 3/4 X 3 1/4750 420C751M500AD8 88.4 33.3 5.7 9.3 1 3/8 X 4 3/4880 420C881M500EJ8 108 61.9 6.4 10.1 1 3/4 X 3 3/4890 420C891M500BB8 105 63.7 6.4 10.0 2 X 3 1/4890 420C891M500AE8 78.2 29.7 6.3 10.3 1 3/8 X 5 1/4

1000 420C102M500EC8 90.9 52.7 7.2 11.4 1 3/4 X 4 1/41000 420C102M500AF8 70.3 27.0 7.0 11.4 1 3/8 X 5 3/41100 420C112M500BJ8 85.8 52.2 8.0 12.3 2 X 3 3/41200 420C122M500ED8 78.9 46.1 8.1 12.8 1 3/4 X 4 3/41300 420C132M500BC8 72.6 44.6 8.7 13.4 2 X 4 1/41400 420C142M500EE8 69.9 41.3 9.1 14.3 1 3/4 X 5 1/41500 420C152M500EF8 62.9 37.5 10.3 16.1 1 3/4 X 5 3/41500 420C152M500BD8 63.1 39.1 9.7 14.8 2 X 4 3/41800 420C182M500BE8 54.5 34.2 10.8 16.4 2 X 5 1/42000 420C202M500BF8 49.2 31.3 11.7 17.8 2 X 5 3/4

Ratings


CORNELLDUBILIER


Aluminum


Type 450C, 105 °C Ultra-Ripple, Long-life, Inverter Grade, Radial Leaded

The Ultimate in Ripple for Plug-in

Type 450C is the 105 °C version of the Type 420C InverterGrade capacitor, and it is the PC-mount version of the Type550C. It delivers the ripple-current capability and exceptionallife needed for motor-drive and inverter bus capacitors. It is asignificantly better value than comparable 105 °C snap-incapacitors. The extended cathode foil of the 450C assurescool operation and heat flow from the capacitor element to thecan in all orientations.

Highlights Better value than large 105 °C snap-in capacitors Especially for motor drives and UPS systems ESRs to 6.9 mΩ Printed-circuit mounting Thermal-Pak™ extended cathode construction



DC Leakage Current: ≤ 3 —CV µA, 4 mA max, 5 minutesCold Impedance: 20 °C multiple of 25 °C Z ≤ 3


50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz1 3/8” & 1 3/4” Diameters100 to 350 V 0.91 0.93 1.00 1.06 1.08 1.09 1.09400 to 500 V 0.82 0.86 1.00 1.14 1.20 1.23 1.232” Diameters100 to 350 V 0.92 0.94 1.00 1.05 1.07 1.08 1.08400 to 500 V 0.82 0.86 1.00 1.14 1.20 1.23 1.27

45 °C 55 °C 65 °C 75 °C 85 °C1.80 1.63 1.45 1.25 1.00

Frequency

EIA Ripple Life: 5000 h at full load at 85 °C per EIA IS-749∆ capacitance ± 20%ESR 200 % of limitDCL 100 % of limit

Shelf Life Test: 500 h at 105 °C. Capacitance, ESR and DCL meet initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane


450C 222 M 100 AK 8

Type Capacitance Tolerance Voltage Case Code Insulation Terminal222 = 2200 F M = 20% 100 = 100 V 0 = bare can (blank) = Straight Leads151 = 150 F T = 10% +50% 450 = 450 V 8 = PVC and Standoffs L = Lay Down 3 Leads

U = 10% +75% 9 = Polyester and Standoffs




CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors


100 Vdc (125 Vdc Surge)2200 450C222M100AK8 74.9 50.9 4.2 5.2 1 3/8 X 1 3/43300 450C332M100AA8 50.3 34.2 5.8 7.3 1 3/8 X 2 1/44000 450C402M100AH8 36.8 24.9 7.0 8.8 1 3/8 X 2 3/44800 450C482M100EA8 40.1 27.2 7.5 9.4 1 3/4 X 2 1/45800 450C582M100AB8 28.5 19.4 8.6 10.7 1 3/8 X 3 1/46100 450C612M100BA8 37.0 25.1 8.4 10.5 2 X 2 1/46600 450C662M100EH8 28.7 19.5 9.5 11.9 1 3/4 X 2 3/47100 450C712M100AJ8 23.5 15.9 9.9 12.4 1 3/8 X 3 3/48200 450C822M100BH8 26.3 17.8 10.7 13.4 2 X 2 3/48400 450C842M100AC8 20.1 13.6 11.3 14.1 1 3/8 X 4 1/48700 450C872M100EB8 22.2 15.1 11.7 14.6 1 3/4 X 3 1/49800 450C982M100AD8 17.7 12.0 12.6 15.8 1 3/8 X 4 3/4

11000 450C113M100AE8 15.9 10.8 13.9 17.4 1 3/8 X 5 1/411000 450C113M100EJ8 18.3 12.4 13.3 16.6 1 3/4 X 3 3/411000 450C113M100BB8 20.4 13.8 12.9 16.1 2 X 3 1/412000 450C123M100AF8 18.1 12.3 13.7 17.1 1 3/8 X 5 3/413000 450C133M100EC8 15.6 10.6 14.9 18.6 1 3/4 X 4 1/414000 450C143M100BJ8 16.8 11.4 15.9 19.9 2 X 3 3/415000 450C153M100ED8 13.7 9.3 16.8 21.0 1 3/4 X 4 3/416000 450C163M100BC8 14.4 9.8 17.3 21.6 2 X 4 1/417000 450C173M100EE8 12.3 8.4 18.8 23.4 1 3/4 X 5 1/418000 450C183M100BD8 12.7 8.6 19.0 23.7 2 X 4 3/419000 450C193M100EF8 11.3 7.6 21.0 26.2 1 3/4 X 5 3/422000 450C223M100BE8 11.1 7.5 21.0 26.2 2 X 5 1/424000 450C243M100BF8 10.2 6.9 22.7 28.4 2 X 5 3/4

160 Vdc (200 Vdc Surge)1200 450C122M160AK8 113 65.2 4.2 5.6 1 3/8 X 1 3/41800 450C182M160AA8 75.7 44.1 5.9 7.7 1 3/8 X 2 1/42600 450C262M160EA8 56.2 36.8 7.5 9.3 1 3/4 X 2 1/43000 450C302M160AH8 53.2 31.3 7.3 9.5 1 3/8 X 2 3/43300 450C332M160AB8 41.4 24.7 8.9 11.5 1 3/8 X 3 1/43300 450C332M160BA8 47.9 34.1 8.3 9.9 2 X 2 1/43600 450C362M160EH8 40.2 26.0 9.5 11.8 1 3/4 X 2 3/44000 450C402M160AJ8 34.2 20.6 10.2 13.1 1 3/8 X 3 3/44500 450C452M160BH8 33.9 23.8 10.7 12.7 2 X 2 3/44700 450C472M160EB8 31.2 20.4 11.7 14.4 1 3/4 X 3 1/44800 450C482M160AC8 29.4 18.0 11.6 14.8 1 3/8 X 4 1/45300 450C532M160AD8 26.9 16.5 12.7 16.2 1 3/8 X 4 3/45800 450C582M160EJ8 25.7 16.9 13.3 16.3 1 3/4 X 3 3/46000 450C602M160BB8 26.4 18.6 12.7 15.1 2 X 3 1/46100 450C612M160AE8 24.2 15.1 14.0 17.8 1 3/8 X 5 1/46700 450C672M160AF8 22.2 14.1 15.4 19.3 1 3/8 X 5 3/46900 450C692M160EC8 22.0 14.7 14.9 18.2 1 3/4 X 4 1/47400 450C742M160BJ8 21.7 15.5 15.7 18.6 2 X 3 3/48000 450C802M160ED8 19.4 13.1 16.7 20.3 1 3/4 X 4 3/48700 450C872M160BC8 18.7 13.4 17.1 20.1 2 X 4 1/49100 450C912M160EE8 17.5 11.9 18.6 22.6 1 3/4 X 5 1/4

10000 450C103M160EF8 16.0 11.0 20.8 25.1 1 3/4 X 5 3/410000 450C103M160BD8 16.5 11.9 18.7 22.0 2 X 4 3/412000 450C123M160BE8 14.5 10.7 20.7 24.1 2 X 5 1/413000 450C133M160BF8 13.4 9.9 22.3 25.9 2 X 5 3/4

200 Vdc (250 Vdc Surge)880 450C881M200AK8 142 78.9 3.8 5.0 1 3/8 X 1 3/4


3500 450C352M200EB8 37.9 23.5 10.6 13.4 1 3/4 X 3 1/43600 450C362M200AC8 36.5 21.3 10.4 13.6 1 3/8 X 4 1/44000 450C402M200AD8 33.4 19.5 11.4 14.9 1 3/8 X 4 3/44300 450C432M200EJ8 31.2 19.5 12.1 15.2 1 3/4 X 3 3/44400 450C442M200BB8 31.2 20.9 11.7 14.3 2 X 3 1/44500 450C452M200AE8 29.9 17.7 12.6 16.4 1 3/8 X 5 1/45000 450C502M200AF8 27.3 16.4 13.9 17.9 1 3/8 X 5 3/45100 450C512M200EC8 26.6 16.8 13.5 17.0 1 3/4 X 4 1/45500 450C552M200BJ8 25.7 17.3 14.5 17.6 2 X 3 3/46000 450C602M200ED8 23.4 14.9 15.2 19.0 1 3/4 X 4 3/46400 450C642M200BC8 22.0 14.9 15.7 19.1 2 X 4 1/46700 450C672M200EE8 21.0 13.5 17.0 21.2 1 3/4 X 5 1/47400 450C742M200BD8 19.4 13.3 17.3 20.9 2 X 4 3/47600 450C762M200EF8 19.1 12.5 19.0 23.6 1 3/4 X 5 3/48900 450C892M200BE8 16.9 11.8 19.1 22.9 2 X 5 1/49800 450C982M200BF8 15.5 10.9 20.7 24.7 2 X 5 3/4

250 Vdc (300 Vdc Surge)550 450C551M250AK8 210 87.3 3.1 4.8 1 3/8 X 1 3/4830 450C831M250AA8 141 58.9 4.3 6.7 1 3/8 X 2 1/4

1000 450C102M250AH8 98.1 41.6 5.4 8.2 1 3/8 X 2 3/41200 450C122M250EA8 96.1 45.9 5.8 8.3 1 3/4 X 2 1/41500 450C152M250BA8 76.5 40.6 6.6 9.0 2 X 2 1/41600 450C162M250AB8 75.7 32.5 6.5 10.0 1 3/8 X 3 1/41700 450C172M250EH8 69.2 32.6 7.2 10.6 1 3/4 X 2 3/41900 450C192M250AJ8 62.0 27.0 7.6 11.5 1 3/8 X 3 3/42100 450C212M250BH8 54.7 28.5 8.4 11.6 2 X 2 3/42200 450C222M250EB8 53.4 25.4 8.9 12.9 1 3/4 X 3 1/42300 450C232M250AC8 52.7 23.3 8.7 13.0 1 3/8 X 4 1/42500 450C252M250AD8 48.2 21.3 9.5 14.2 1 3/8 X 4 3/42700 450C272M250EJ8 43.6 21.0 10.2 14.7 1 3/4 X 3 3/42800 450C282M250BB8 42.2 22.2 10.1 13.9 2 X 3 1/42900 450C292M250AE8 43.0 19.4 10.5 15.7 1 3/8 X 5 1/43100 450C312M250AF8 38.9 17.9 11.6 17.1 1 3/8 X 5 3/43200 450C322M250EC8 37.1 18.1 11.5 16.4 1 3/4 X 4 1/43400 450C342M250BJ8 34.6 18.4 12.5 17.1 2 X 3 3/43800 450C382M250ED8 32.4 16.0 12.9 18.4 1 3/4 X 4 3/44100 450C412M250BC8 29.4 15.9 13.6 18.5 2 X 4 1/44200 450C422M250EE8 28.9 14.5 14.5 20.5 1 3/4 X 5 1/44700 450C472M250BD8 26.0 14.1 14.9 20.3 2 X 4 3/44800 450C482M250EF8 26.2 13.4 16.3 22.8 1 3/4 X 5 3/45600 450C562M250BE8 22.4 12.5 16.6 22.3 2 X 5 1/46200 450C622M250BF8 20.4 11.5 18.0 24.0 2 X 5 3/4

300 Vdc (350 Vdc Surge)380 450C381M300AK8 283 134 2.4 3.5 1 3/8 X 1 3/4570 450C571M300AA8 189 89.9 3.3 4.8 1 3/8 X 2 1/4800 450C801M300AH8 131 63.1 4.1 6.0 1 3/8 X 2 3/4960 450C961M300EA8 119 56.7 4.8 6.9 1 3/4 X 2 1/4

1100 450C112M300AB8 101 49.0 5.1 7.3 1 3/8 X 3 1/41200 450C122M300BA8 106 53.2 5.5 7.8 2 X 2 1/41300 450C132M300EH8 87.0 40.8 6.0 8.7 1 3/4 X 2 3/41300 450C132M300AJ8 82.4 40.4 5.9 8.4 1 3/8 X 3 3/41500 450C152M300AC8 69.7 34.6 6.7 9.5 1 3/8 X 4 1/41600 450C162M300BH8 75.8 37.7 7.0 9.9 2 X 2 3/41700 450C172M300EB8 66.9 31.7 7.3 10.7 1 3/4 X 3 1/41800 450C182M300AD8 60.6 30.5 7.5 10.6 1 3/8 X 4 3/42100 450C212M300AE8 53.7 27.5 8.4 11.7 1 3/8 X 5 1/42100 450C212M300EJ8 54.5 26.1 8.4 12.1 1 3/4 X 3 3/42100 450C212M300BB8 58.4 29.3 8.4 11.9 2 X 3 1/42300 450C232M300AF8 48.4 25.1 9.3 12.9 1 3/8 X 5 3/42500 450C252M300EC8 48.1 23.3 9.5 13.6 1 3/4 X 4 1/42600 450C262M300BJ8 47.6 24.1 10.4 14.7 2 X 3 3/42900 450C292M300ED8 41.8 20.5 10.7 15.3 1 3/4 X 4 3/4

ESR Max. 25 °C Ripple Amps, 85 °C Nom SizeCap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D X L F Number (mΩ) (mΩ) (A) (A) (in)


Ratings


CORNELLDUBILIER


Aluminum




350 Vdc (400 Vdc Surge)300 450C301M350AK8 325 150 2.2 3.3 1 3/8 X 1 3/4460 450C461M350AA8 217 100 3.1 4.6 1 3/8 X 2 1/4600 450C601M350AH8 151 70.3 3.8 5.6 1 3/8 X 2 3/4770 450C771M350EA8 135 61.9 4.5 6.6 1 3/4 X 2 1/4860 450C861M350AB8 116 54.5 4.7 6.9 1 3/8 X 3 1/4960 450C961M350BA8 119 57.4 5.2 7.5 2 X 2 1/4

1000 450C102M350EH8 99.0 44.7 5.6 8.3 1 3/4 X 2 3/41000 450C102M350AJ8 94.4 44.9 5.5 8.0 1 3/8 X 3 3/41200 450C122M350AC8 79.8 38.4 6.3 9.1 1 3/8 X 4 1/41300 450C132M350BH8 85.6 40.7 6.6 9.6 2 X 2 3/41400 450C142M350EB8 76.1 34.7 6.9 10.2 1 3/4 X 3 1/41500 450C152M350AD8 69.3 33.8 7.0 10.1 1 3/8 X 4 3/41700 450C172M350EJ8 62.0 28.5 7.9 11.6 1 3/4 X 3 3/41700 450C172M350BB8 65.8 31.6 7.9 11.4 2 X 3 1/41700 450C172M350AE8 61.4 30.3 7.8 11.2 1 3/8 X 5 1/41800 450C182M350AF8 55.2 27.7 8.7 12.3 1 3/8 X 5 3/42000 450C202M350EC8 54.6 25.4 8.9 13.0 1 3/4 X 4 1/42100 450C212M350BJ8 53.7 26.0 9.8 14.1 2 X 3 3/42300 450C232M350ED8 47.4 22.3 10.0 14.6 1 3/4 X 4 3/42500 450C252M350BC8 46.2 23.1 10.7 15.1 2 X 4 1/42600 450C262M350EE8 42.0 20.0 11.3 16.4 1 3/4 X 5 1/42900 450C292M350BD8 40.0 19.7 11.8 16.8 2 X 4 3/43000 450C302M350EF8 37.8 18.3 12.7 18.3 1 3/4 X 5 3/43500 450C352M350BE8 34.2 17.3 13.2 18.6 2 X 5 1/43800 450C382M350BF8 30.9 15.8 14.4 20.1 2 X 5 3/4

400 Vdc (450 Vdc Surge)270 450C271M400AK8 356 161 2.1 3.1 1 3/8 X 1 3/4410 450C411M400AA8 238 108 3.0 4.4 1 3/8 X 2 1/4600 450C601M400AH8 166 75.7 3.7 5.4 1 3/8 X 2 3/4690 450C691M400EA8 147 65.8 4.3 6.4 1 3/4 X 2 1/4770 450C771M400AB8 127 58.7 4.5 6.6 1 3/8 X 3 1/4860 450C861M400BA8 129 60.6 5.0 7.3 2 X 2 1/4930 450C931M400EH8 108 47.6 5.3 8.1 1 3/4 X 2 3/4930 450C931M400AJ8 103.4 48.2 5.2 7.7 1 3/8 X 3 3/4

1100 450C112M400AC8 87.4 41.2 6.0 8.7 1 3/8 X 4 1/41200 450C122M400EB8 83.0 36.9 6.6 9.9 1 3/4 X 3 1/41200 450C122M400BH8 92.9 43.0 6.3 9.3 2 X 2 3/41300 450C132M400AD8 75.9 36.2 6.7 9.7 1 3/8 X 4 3/41500 450C152M400BB8 71.4 33.3 7.6 11.1 2 X 3 1/41500 450C152M400AE8 67.2 32.5 7.5 10.8 1 3/8 X 5 1/41500 450C152M400EJ8 67.5 30.3 7.5 11.3 1 3/4 X 3 3/41600 450C162M400AF8 60.4 29.6 8.3 11.9 1 3/8 X 5 3/41800 450C182M400EC8 59.4 26.9 8.5 12.6 1 3/4 X 4 1/41900 450C192M400BJ8 58.2 27.4 9.4 13.7 2 X 3 3/42100 450C212M400ED8 51.6 23.7 9.6 14.2 1 3/4 X 4 3/42200 450C222M400BC8 50.1 24.3 10.2 14.7 2 X 4 1/42300 450C232M400EE8 45.7 21.2 10.8 15.9 1 3/4 X 5 1/42600 450C262M400EF8 41.1 19.4 12.2 17.8 1 3/4 X 5 3/42600 450C262M400BD8 43.3 20.7 11.4 16.4 2 X 4 3/43100 450C312M400BE8 37.0 18.1 12.7 18.2 2 X 5 1/43400 450C342M400BF8 33.4 16.6 13.9 19.7 2 X 5 3/4

450 Vdc (500 Vdc Surge)210 450C211M450AK8 384 171 2.0 3.1 1 3/8 X 1 3/4310 450C311M450AA8 256 115 2.9 4.3 1 3/8 X 2 1/4400 450C401M450AH8 178 80.4 3.5 5.3 1 3/8 X 2 3/4

520 450C521M450EA8 157 69.2 4.1 6.3 1 3/4 X 2 1/4580 450C581M450AB8 137 62.3 4.3 6.4 1 3/8 X 3 1/4650 450C651M450BA8 138 63.3 4.8 7.1 2 X 2 1/4700 450C701M450EH8 116 50.1 5.2 7.9 1 3/4 X 2 3/4710 450C711M450AJ8 111 51.1 5.1 7.5 1 3/8 X 3 3/4840 450C841M450AC8 93.9 43.6 5.8 8.5 1 3/8 X 4 1/4870 450C871M450BH8 99.2 45.0 6.1 9.1 2 X 2 3/4920 450C921M450EB8 88.9 38.8 6.4 9.6 1 3/4 X 3 1/4990 450C991M450AD8 81.5 38.3 6.5 9.5 1 3/8 X 4 3/4

1100 450C112M450EJ8 72.3 31.8 7.3 11.0 1 3/4 X 3 3/41100 450C112M450AE8 72.1 34.3 7.2 10.5 1 3/8 X 5 1/41200 450C122M450AF8 64.8 31.2 8.0 11.6 1 3/8 X 5 3/41200 450C122M450BB8 76.3 34.9 7.4 10.9 2 X 3 1/41400 450C142M450BJ8 62.1 28.7 9.1 13.5 2 X 3 3/41400 450C142M450EC8 63.6 28.3 8.2 12.3 1 3/4 X 4 1/41600 450C162M450ED8 55.2 24.8 9.3 13.9 1 3/4 X 4 3/41700 450C172M450BC8 53.4 25.4 9.9 14.4 2 X 4 1/41800 450C182M450EE8 48.9 22.3 10.5 15.5 1 3/4 X 5 1/42000 450C202M450EF8 44.0 20.3 11.8 17.4 1 3/4 X 5 3/42000 450C202M450BD8 46.2 21.6 11.0 16.1 2 X 4 3/42300 450C232M450BE8 39.4 18.9 12.3 17.8 2 X 5 1/42600 450C262M450BF8 35.6 17.3 13.4 19.3 2 X 5 3/4

500 Volts (550 Volts Surge)150 450C151M500AK8 440 158 1.9 3.2 1 3/8 X 1 3/4230 450C231M500AA8 294 106 2.7 4.5 1 3/8 X 2 1/4330 450C331M500AH8 204 73.8 3.3 5.5 1 3/8 X 2 3/4350 450C351M500EA8 262 146 3.7 6.0 1 3/4 X 2 1/4430 450C431M500AB8 157 57.0 4.1 6.7 1 3/8 X 3 1/4440 450C441M500BA8 208 122 4.4 6.9 2 X 2 1/4500 450C501M500EH8 182 102 4.8 7.7 1 3/4 X 2 3/4530 450C531M500AJ8 128 46.7 4.7 7.8 1 3/8 X 3 3/4620 450C621M500BH8 144 85.3 5.7 9.0 2 X 2 3/4630 450C631M500AC8 145 82.8 5.4 8.9 1 3/8 X 4 1/4660 450C661M500EB8 140 78.6 5.9 9.5 1 3/4 X 3 1/4700 450C701M500AD8 93.5 34.7 6.1 9.9 1 3/8 X 4 3/4820 450C821M500EJ8 114 64.4 6.8 10.9 1 3/4 X 3 3/4830 450C831M500BB8 111 66.0 6.9 10.7 2 X 3 1/4830 450C831M500AE8 82.7 31.0 6.8 11.0 1 3/8 X 5 1/4930 450C931M500AF8 74.3 28.2 7.5 12.2 1 3/8 X 5 3/4970 450C971M500EC8 96.0 54.8 7.6 12.2 1 3/4 X 4 1/4

1000 450C102M500BJ8 90.4 54.1 8.5 13.3 2 X 3 3/41100 450C112M500ED8 83.3 48.0 8.6 13.7 1 3/4 X 4 3/41200 450C122M500BC8 76.4 46.2 9.3 14.5 2 X 4 1/41300 450C132M500EE8 73.7 42.8 9.7 15.4 1 3/4 X 5 1/41400 450C142M500EF8 66.3 38.9 11.0 17.3 1 3/4 X 5 3/41400 450C142M500BD8 66.4 40.5 10.3 15.9 2 X 4 3/41700 450C172M500BE8 57.3 35.4 11.5 17.7 2 X 5 1/41900 450C192M500BF8 51.8 32.3 12.6 19.1 2 X 5 3/4



Ratings




CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors

Type 401C, –55 °C to 105 °C Low-ESR, Wide Temperature Grade


Rated Voltage: 6.3 to 250 VdcCapacitance: 380 µF to 570,000 µF ± 20%

DC Leakage Current: ≤1.5 CV µA, 4 mA max, 5 minutesCold Impedance: –55 °C multiple of 25 °C Z ≤ 3


Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz+6.3 to 50 V 0.85 0.90 1.00 1.05 1.10 1.10 1.1063 to 250 V 0.50 0.53 1.00 1.15 1.20 1.20 1.20

Load Life: 2,000 h at 85 °C and full load Capacitance 10%ESR 200% of limitDCL 100% of limit

Shelf Life: 500 h at +105 °C, capacitance, ESR and DCL, will meet initial requirementsVibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.73 1.58 1.41 1.22 1.00 0.71 0.00

The Ultimate in Cold Performance and ESR

The Type 401C is the wide-temperature, low-voltage versionof the Type 450C. It is ideal for high-ripple current militaryand industrial applications that need full performance at coldtemperatures. It also excels as a power-supply output capac-itor because of its exceptionally low ESR. The extendedcathode foil of the 401C assures cool operation and heatflow from the capacitor element to the can in all mountingorientations

Highlights Better value than large snap-in capacitors Ripple Currents to >50 amps at 55 °C ESRs to 3.5 mΩ > 90% capacitance at –40 °C Thermal-Pak™ extended cathode construction


CORNELLDUBILIER


Aluminum



Case Dimensions

Case Inches MillimetersCode D.031 L MAX C .015 S .031 E .031 F.015 D.78 L MAX C.78 S.78 E.78 F.38

AK 1.375 1.75 0.50 0.175 0.25 0.55 34.93 44.45 12.70 4.45 6.35 13.97AA 1.375 2.25 0.50 0.175 0.25 0.55 34.93 57.15 12.70 4.45 6.35 13.97AH 1.375 2.75 0.50 0.175 0.25 0.55 34.98 69.85 12.70 4.45 6.35 13.97AB 1.375 3.25 0.50 0.175 0.25 0.55 34.93 82.55 12.70 4.45 6.35 13.97AJ 1.375 3.75 0.50 0.175 0.25 0.55 34.93 95.25 12.70 4.45 6.35 13.97

AC 1.375 4.25 0.50 0.175 0.25 0.55 34.93 107.95 12.70 4.45 6.35 13.97AD 1.375 4.75 0.50 0.175 0.25 0.55 34.93 120.65 12.70 4.45 6.35 13.97AE 1.375 5.25 0.50 0.175 0.25 0.55 34.93 133.35 12.70 4.45 6.35 13.97AF 1.375 5.75 0.50 0.175 0.25 0.55 34.93 146.05 12.70 4.45 6.35 13.97EA 1.75 2.25 0.70 0.375 0.35 0.90 44.45 57.15 17.78 9.53 8.89 22.86

EH 1.75 2.75 0.70 0.375 0.35 0.90 44.45 69.85 17.78 9.53 8.89 22.86EB 1.75 3.25 0.70 0.375 0.35 0.90 44.45 82.55 17.78 9.53 8.89 22.86EJ 1.75 3.75 0.70 0.375 0.35 0.90 44.45 95.25 17.78 9.53 8.89 22.86EC 1.75 4.25 0.70 0.375 0.35 0.90 44.45 107.95 17.78 9.53 8.89 22.86ED 1.75 4.75 0.70 0.375 0.35 0.90 44.45 120.65 17.78 9.53 8.89 22.86

EE 1.75 5.25 0.70 0.375 0.35 0.90 44.45 133.35 17.78 9.53 8.89 22.86EF 1.75 5.75 0.70 0.375 0.35 0.90 44.45 146.05 17.78 9.53 8.89 22.86BA 2.00 2.25 0.80 0.425 0.40 1.00 50.80 57.15 20.32 10.80 10.16 25.40BH 2.00 2.75 0.80 0.425 0.40 1.00 50.80 69.85 20.32 10.80 10.16 25.40BB 2.00 3.25 0.80 0.425 0.40 1.00 50.80 82.55 20.32 10.80 10.16 25.40

BJ 2.00 3.75 0.80 0.425 0.40 1.00 50.80 95.25 20.32 10.80 10.16 25.40BC 2.00 4.25 0.80 0.425 0.40 1.00 50.80 107.95 20.32 10.80 10.16 25.40BD 2.00 4.75 0.80 0.425 0.40 1.00 50.80 120.65 20.32 10.80 10.16 25.40BE 2.00 5.25 0.80 0.425 0.40 1.00 50.80 133.25 20.32 10.80 10.16 25.40BF 2.00 5.75 0.80 0.425 0.40 1.00 50.80 146.05 20.32 10.80 10.16 25.40


401C 393 M 100 AK 8

Type Capacitance Tolerance Voltage Case Code Insulation Terminal242 = 2400 F M = 20% 100 = 100 V 0 = bare can (blank) = Straight Leads221 = 220 F T = 10% +50% 450 = 450 V 8 = PVC and L = Lay Down (3 Leads)

U = 10% +75% Standoffs9 = Polyester and

Standoffs

Outline Drawings

++

Laydown Style





CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors



Type 401C Operating Life vs Ripple Current (90% V)

1

10

100

1000

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5


Exp

ecte

d O

pera

ting

Lif

e, k

h

45°C

55°C

65°C

75°C

85°C

95°C

Temperature Characteristics - 14,000 F 10 Vdc

Temperature Characteristics - 4100 F 100 Vdc Impedance vs. Frequency - 4100 F 100 Vdc

Temperature Characteristics - 14,000 F 10 Vdc


CORNELLDUBILIER


Aluminum


Ratings




6.3 Vdc (9 Vdc Surge)42000 401C423M6R3AK8 33.4 22.7 8.4 9.2 1 3/8 X 1 5/866000 401C663M6R3AA8 23.0 16.1 10.8 11.8 1 3/8 X 2 1/892000 401C923M6R3AH8 16.8 12.0 13.0 14.2 1 3/8 X 2 5/8

100000 401C104M6R3EA8 21.2 15.0 11.9 13.4 1 3/4 X 2 1/8120000 401C124M6R3AB8 14.6 8.5 15.4 17.0 1 3/8 X 3 1/8140000 401C144M6R3AJ8 12.3 7.3 17.7 19.2 1 3/8 X 3 5/8150000 401C154M6R3BA8 12.7 10.3 16.4 17.2 2 X 2 1/8150000 401C154M6R3EH8 15.1 10.7 15.1 16.9 1 3/4 X 2 5/8170000 401C174M6R3AC8 10.8 6.4 19.7 21.3 1 3/8 X 4 1/8200000 401C204M6R3AD8 9.7 5.8 21.5 23.1 1 3/8 X 4 5/8200000 401C204M6R3BH8 9.3 7.3 20.5 22.1 2 X 2 5/8200000 401C204M6R3EB8 11.9 8.4 18.2 20.4 1 3/4 X 3 1/8230000 401C234M6R3AE8 9.0 5.4 23.3 24.9 1 3/8 X 5 1/8250000 401C254M6R3BB8 7.4 5.8 24.2 26.0 2 X 3 1/8250000 401C254M6R3EJ8 10.0 7.1 20.5 22.8 1 3/4 X 3 5/8260000 401C264M6R3AF8 8.4 5.1 25.1 26.7 1 3/8 X 5 5/8290000 401C294M6R3EC8 8.7 6.2 22.6 25.2 1 3/4 X 4 1/8310000 401C314M6R3BJ8 6.5 4.9 26.6 28.8 2 X 3 5/8350000 401C354M6R3ED8 7.8 5.6 25.0 27.8 1 3/4 X 4 5/8370000 401C374M6R3BC8 5.7 4.3 29.0 30.8 2 X 4 1/8390000 401C394M6R3EE8 7.2 5.1 27.5 30.5 1 3/4 X 5 1/8420000 401C424M6R3BD8 5.2 3.9 30.9 33.4 2 X 4 5/8440000 401C444M6R3EF8 6.7 4.8 30.3 33.4 1 3/4 X 5 5/8510000 401C514M6R3BE8 4.8 3.6 32.6 35.8 2 X 5 1/8570000 401C574M6R3BF8 4.5 3.5 34.0 37.9 2 X 5 5/8

7.5 Vdc (10 Vdc Surge)41000 401C413M7R5AK8 33.4 22.7 8.4 9.2 1 3/8 X 1 5/862000 401C623M7R5AA8 23.0 16.1 10.8 11.8 1 3/8 X 2 1/890000 401C903M7R5AH8 16.8 12.0 13.0 14.2 1 3/8 X 2 5/8

100000 401C104M7R5EA8 21.2 15.0 11.9 13.4 1 3/4 X 2 1/8120000 401C124M7R5AB8 14.6 9.5 15.4 17.0 1 3/8 X 3 1/8140000 401C144M7R5AJ8 12.3 8.0 17.7 19.2 1 3/8 X 3 5/8140000 401C144M7R5BA8 12.7 10.3 16.4 17.2 2 X 2 1/8150000 401C154M7R5EH8 15.1 10.7 15.1 16.9 1 3/4 X 2 5/8170000 401C174M7R5AC8 10.8 7.1 19.7 21.3 1 3/8 X 4 1/8190000 401C194M7R5AD8 9.7 6.4 21.5 23.1 1 3/8 X 4 5/8190000 401C194M7R5BH8 9.3 7.3 20.5 22.1 2 X 2 5/8190000 401C194M7R5EB8 11.9 8.4 18.2 20.4 1 3/4 X 3 1/8230000 401C234M7R5AE8 9.0 5.9 23.3 24.9 1 3/8 X 5 1/8240000 401C244M7R5EJ8 10.0 7.1 20.5 22.8 1 3/4 X 3 5/8250000 401C254M7R5AF8 8.4 5.6 25.1 26.7 1 3/8 X 5 5/8250000 401C254M7R5BB8 7.4 5.8 24.2 26.0 2 X 3 1/8290000 401C294M7R5EC8 8.7 6.2 22.6 25.2 1 3/4 X 4 1/8300000 401C304M7R5BJ8 6.5 4.9 26.6 28.8 2 X 3 5/8340000 401C344M7R5ED8 7.8 5.6 25.0 27.8 1 3/4 X 4 5/8370000 401C374M7R5BC8 5.7 4.3 29.0 30.8 2 X 4 1/8380000 401C384M7R5EE8 7.2 5.1 27.5 30.5 1 3/4 X 5 1/8420000 401C424M7R5BD8 5.2 3.9 30.9 33.4 2 X 4 5/8440000 401C444M7R5EF8 6.7 4.8 30.3 33.4 1 3/4 X 5 5/8500000 401C504M7R5BE8 4.8 3.6 32.6 35.8 2 X 5 1/8560000 401C564M7R5BF8 4.5 3.5 34.0 37.9 2 X 5 5/8

10 Vdc (15 Vdc Surge)31000 401C313M010AK8 33.4 22.7 8.4 9.2 1 3/8 X 1 5/850000 401C503M010AA8 23.0 16.1 10.8 11.8 1 3/8 X 2 1/869000 401C693M010AH8 16.8 12.0 13.0 14.2 1 3/8 X 2 5/8

81000 401C813M010EA8 21.2 13.3 11.9 13.4 1 3/4 X 2 1/891000 401C913M010AB8 14.6 9.5 15.4 17.0 1 3/8 X 3 1/8

110000 401C114M010AJ8 12.3 8.0 17.7 19.2 1 3/8 X 3 5/8110000 401C114M010BA8 12.7 10.3 16.4 17.2 2 X 2 1/8120000 401C124M010EH8 15.1 9.5 15.1 16.9 1 3/4 X 2 5/8130000 401C134M010AC8 10.8 7.1 19.7 21.3 1 3/8 X 4 1/8150000 401C154M010AD8 9.7 6.4 21.5 23.1 1 3/8 X 4 5/8150000 401C154M010BH8 9.3 7.3 20.5 22.1 2 X 2 5/8150000 401C154M010EB8 11.9 7.5 18.2 20.4 1 3/4 X 3 1/8170000 401C174M010AE8 9.0 5.9 23.3 24.9 1 3/8 X 5 1/8180000 401C184M010EJ8 10.0 6.3 20.5 22.8 1 3/4 X 3 5/8190000 401C194M010AF8 8.4 5.6 25.1 26.7 1 3/8 X 5 5/8190000 401C194M010BB8 7.4 5.8 24.2 26.0 2 X 3 1/8230000 401C234M010EC8 8.7 5.5 22.6 25.2 1 3/4 X 4 1/8240000 401C244M010BJ8 6.5 4.9 26.6 28.8 2 X 3 5/8260000 401C264M010ED8 7.8 5.0 25.0 27.8 1 3/4 X 4 5/8280000 401C284M010BC8 5.7 4.3 29.0 30.8 2 X 4 1/8290000 401C294M010EE8 7.2 4.6 27.5 30.5 1 3/4 X 5 1/8330000 401C334M010BD8 5.2 3.9 30.9 33.4 2 X 4 5/8340000 401C344M010EF8 6.7 4.3 30.3 33.4 1 3/4 X 5 5/8390000 401C394M010BE8 4.8 3.6 32.6 35.8 2 X 5 1/8440000 401C444M010BF8 4.5 3.5 34.0 37.9 2 X 5 5/8

16 Vdc (24 Vdc Surge)20,000 401C203M016AK8 34.7 23.0 8.3 9.1 1 3/8 X 1 5/833,000 401C333M016AA8 23.9 16.3 10.6 11.7 1 3/8 X 2 1/846000 401C463M016AH8 17.4 11.2 12.8 14.2 1 3/8 X 2 5/853000 401C533M016EA8 21.5 15.9 11.8 13.3 1 3/4 X 2 1/860000 401C603M016AB8 14.9 8.9 15.2 16.9 1 3/8 X 3 1/874000 401C743M016AJ8 12.5 7.5 17.5 19.1 1 3/8 X 3 5/875000 401C753M016BA8 12.7 10.2 16.4 17.4 2 X 2 1/878000 401C783M016EH8 15.3 11.3 14.9 16.8 1 3/4 X 2 5/889000 401C893M016AC8 11.0 6.6 19.5 21.2 1 3/8 X 4 1/8

100000 401C104M016AD8 9.4 7.3 20.4 22.1 2 X 2 5/8100000 401C104M016BH8 12.0 8.9 18.1 20.3 1 3/4 X 3 1/8100000 401C104M016EB8 9.9 6.0 21.3 23.0 1 3/8 X 4 5/8120000 401C124M016AE8 9.1 5.5 23.1 24.8 1 3/8 X 5 1/8130000 401C134M016AF8 8.6 5.2 24.9 26.6 1 3/8 X 5 5/8130000 401C134M016BB8 7.5 5.8 24.0 26.0 2 X 3 1/8130000 401C134M016EJ8 10.1 7.5 20.3 22.8 1 3/4 X 3 5/8150000 401C154M016EC8 8.8 6.6 22.5 25.1 1 3/4 X 4 1/8160000 401C164M016BJ8 6.6 5.0 26.4 28.8 2 X 3 5/8170000 401C174M016ED8 7.9 6.0 24.9 27.7 1 3/4 X 4 5/8180000 401C184M016BC8 5.8 4.4 28.8 30.7 2 X 4 1/8190000 401C194M016EE8 7.3 5.5 27.4 30.4 1 3/4 X 5 1/8220000 401C224M016BD8 5.2 4.0 30.7 33.3 2 X 4 5/8220000 401C224M016EF8 6.8 5.2 30.1 33.4 1 3/4 X 5 5/8260000 401C264M016BE8 4.8 3.7 32.4 35.7 2 X 5 1/8280000 401C284M016BF8 4.6 3.5 33.8 37.9 2 X 5 5/8

20 Vdc (30 Vdc Surge)17000 401C173M020AK8 37.9 23.7 8.4 9.1 1 3/8 X 1 5/826000 401C263M020AA8 26.0 16.8 10.9 11.7 1 3/8 X 2 1/833000 401C333M020AH8 18.9 12.4 13.2 14.1 1 3/8 X 2 5/845000 401C453M020EA8 22.3 15.5 11.6 13.3 1 3/4 X 2 1/850000 401C503M020AB8 15.6 9.9 15.1 16.8 1 3/8 X 3 1/858000 401C583M020BA8 13.2 10.4 16.1 17.3 2 X 2 1/861000 401C613M020AJ8 13.1 8.3 17.1 19.0 1 3/8 X 3 5/8




CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors

Ratings




64000 401C643M020EH8 15.8 11.0 14.7 16.8 1 3/4 X 2 5/873000 401C733M020AC8 11.5 7.3 19.1 21.1 1 3/8 X 4 1/882000 401C823M020BH8 9.8 7.5 20.1 22.0 2 X 2 5/884000 401C843M020EB8 12.4 8.7 17.8 20.3 1 3/4 X 3 1/885000 401C853M020AD8 10.3 6.6 20.9 22.9 1 3/8 X 4 5/896000 401C963M020AE8 9.5 6.1 22.6 24.7 1 3/8 X 5 1/8

100000 401C104M020AF8 10.4 7.3 20.0 22.7 1 3/4 X 3 5/8100000 401C104M020BB8 7.7 5.9 23.7 25.9 2 X 3 1/8100000 401C104M020EJ8 8.9 5.8 24.4 26.5 1 3/8 X 5 5/8120000 401C124M020EC8 9.1 6.4 22.1 25.0 1 3/4 X 4 1/8130000 401C134M020BJ8 6.8 5.0 26.0 28.7 2 X 3 5/8140000 401C144M020ED8 8.1 5.7 24.5 27.6 1 3/4 X 4 5/8150000 401C154M020BC8 6.0 4.5 28.5 30.7 2 X 4 1/8160000 401C164M020EE8 7.5 5.3 27.0 30.3 1 3/4 X 5 1/8170000 401C174M020BD8 5.4 4.0 30.3 33.2 2 X 4 5/8180000 401C184M020EF8 7.0 4.9 29.7 33.3 1 3/4 X 5 5/8220000 401C224M020BE8 4.9 3.7 32.1 35.7 2 X 5 1/8240000 401C244M020BF8 4.7 3.5 33.5 37.8 2 X 5 5/8

25 Vdc (35 Vdc Surge)13000 401C133M025AK8 41.0 24.4 8.1 9.0 1 3/8 X 1 5/820000 401C203M025AA8 28.1 17.2 10.5 11.6 1 3/8 X 2 1/833000 401C333M025AH8 20.3 12.8 12.8 14.0 1 3/8 X 2 5/835000 401C353M025EA8 23.0 15.8 11.4 13.2 1 3/4 X 2 1/838000 401C383M025AB8 16.3 10.1 14.6 16.7 1 3/8 X 3 1/845000 401C453M025BA8 13.6 10.6 15.9 17.3 2 X 2 1/848000 401C483M025AJ8 13.6 8.5 16.7 18.9 1 3/8 X 3 5/850000 401C503M025EH8 16.3 11.2 14.4 16.7 1 3/4 X 2 5/857000 401C573M025AC8 11.9 7.5 18.7 21.0 1 3/8 X 4 1/863000 401C633M025BH8 10.1 7.6 19.8 21.9 2 X 2 5/866000 401C663M025AD8 10.7 6.8 20.4 22.8 1 3/8 X 4 5/866000 401C663M025EB8 12.8 8.8 17.5 20.2 1 3/4 X 3 1/875000 401C753M025AE8 9.9 6.3 22.2 24.6 1 3/8 X 5 1/881000 401C813M025EJ8 10.7 7.4 19.7 22.6 1 3/4 X 3 5/883000 401C833M025BB8 8.0 6.1 23.4 25.8 2 X 3 1/884000 401C843M025AF8 9.2 5.9 23.9 26.4 1 3/8 X 5 5/896000 401C963M025EC8 9.3 6.5 21.8 25.0 1 3/4 X 4 1/8

100000 401C104M025BJ8 7.0 5.1 25.7 28.6 2 X 3 5/8110000 401C114M025ED8 8.4 5.8 24.2 27.5 1 3/4 X 4 5/8120000 401C124M025BC8 6.1 4.5 28.1 30.6 2 X 4 1/8130000 401C134M025EE8 7.7 5.3 26.6 30.2 1 3/4 X 5 1/8140000 401C144M025BD8 5.5 4.1 29.9 33.2 2 X 4 5/8140000 401C144M025EF8 7.1 5.0 29.3 33.2 1 3/4 X 5 5/8160000 401C164M025BE8 5.1 3.8 31.7 35.6 2 X 5 1/8180000 401C184M025BF8 4.8 3.6 33.1 37.7 2 X 5 5/8

40 Vdc (60 Vdc Surge)8200 401C822M040AK8 44.2 25.9 7.6 8.8 1 3/8 X 1 5/8

12000 401C123M040AA8 30.2 18.3 9.7 11.4 1 3/8 X 2 1/820000 401C203M040EA8 24.7 16.5 11.0 13.1 1 3/4 X 2 1/822000 401C223M040AH8 22.1 13.6 11.9 13.8 1 3/8 X 2 5/823000 401C233M040AB8 17.8 10.7 13.7 16.5 1 3/8 X 3 1/827000 401C273M040BA8 14.7 11.1 15.1 17.1 2 X 2 1/828000 401C283M040AJ8 14.9 9.0 15.2 18.6 1 3/8 X 3 5/830000 401C303M040EH8 17.5 11.7 13.9 16.5 1 3/4 X 2 5/834000 401C343M040AC8 13.0 7.9 16.5 20.7 1 3/8 X 4 1/838000 401C383M040BH8 10.8 8.0 19.0 21.8 2 X 2 5/8

39000 401C393M040AD8 11.6 7.1 18.1 22.5 1 3/8 X 4 5/839000 401C393M040EB8 13.7 9.2 16.9 20.0 1 3/4 X 3 1/845000 401C453M040AE8 10.7 6.6 19.7 24.3 1 3/8 X 5 1/849000 401C493M040EJ8 11.4 7.7 19.1 22.5 1 3/4 X 3 5/850000 401C503M040BB8 8.6 6.3 22.5 25.7 2 X 3 1/850000 401C503M040AF8 9.9 6.2 21.3 26.1 1 3/8 X 5 5/858000 401C583M040EC8 9.9 6.7 21.1 24.8 1 3/4 X 4 1/861000 401C613M040BJ8 7.5 5.3 25.0 28.4 2 X 3 5/868000 401C683M040ED8 8.9 6.0 23.4 27.4 1 3/4 X 4 5/873000 401C733M040BC8 6.5 4.7 27.0 30.4 2 X 4 1/877000 401C773M040EE8 8.1 5.5 25.9 30.0 1 3/4 X 5 1/884000 401C843M040BD8 5.9 4.2 29.1 33.0 2 X 4 5/886000 401C863M040EF8 7.6 5.2 28.5 33.0 1 3/4 X 5 5/8

100000 401C104M040BE8 5.4 3.9 30.9 35.4 2 X 5 1/8110000 401C114M040BF8 5.1 3.7 31.8 37.5 2 X 5 5/8

50 Vdc (75 Vdc Surge)5600 401C562M050AK8 46.6 27.3 7.2 8.4 1 3/8 X 1 5/88400 401C842M050AA8 30.2 19.3 9.2 10.8 1 3/8 X 2 1/8

11000 401C113M050AH8 22.5 14.3 11.6 13.1 1 3/8 X 2 5/814000 401C143M050EA8 28.3 18.9 10.0 11.8 1 3/4 X 2 1/815000 401C153M050AB8 18.1 11.3 13.4 15.7 1 3/8 X 3 1/818000 401C183M050BA8 18.7 14.4 12.4 14.8 2 X 2 1/819000 401C193M050AJ8 15.1 9.5 14.6 17.8 1 3/8 X 3 5/820000 401C203M050EH8 20.0 13.4 12.7 15.0 1 3/4 X 2 5/823000 401C233M050AC8 13.0 8.3 15.3 19.9 1 3/8 X 4 1/826000 401C263M050BH8 13.7 10.2 15.9 18.9 2 X 2 5/827000 401C273M050AD8 12.2 7.4 16.7 21.7 1 3/8 X 4 5/827000 401C273M050EB8 15.6 10.5 15.5 18.2 1 3/4 X 3 1/830000 401C303M050AE8 11.2 6.8 18.1 23.4 1 3/8 X 5 1/833000 401C333M050EJ8 13.0 8.8 17.6 20.5 1 3/4 X 3 5/834000 401C343M050AF8 10.4 6.4 19.4 25.2 1 3/8 X 5 5/834000 401C343M050BB8 10.8 8.1 18.9 22.4 2 X 3 1/839000 401C393M050EC8 11.2 7.6 19.5 22.7 1 3/4 X 4 1/841000 401C413M050BJ8 9.3 6.8 22.6 25.0 2 X 3 5/846000 401C463M050ED8 10.0 6.8 21.7 25.2 1 3/4 X 4 5/850000 401C503M050BC8 8.1 5.9 24.3 26.9 2 X 4 1/852000 401C523M050EE8 9.1 6.2 24.1 27.8 1 3/4 X 5 1/858000 401C583M050EF8 8.4 5.8 26.6 30.6 1 3/4 X 5 5/858000 401C583M050BD8 7.2 5.3 26.1 29.2 2 X 4 5/860000 401C603M050BE8 6.5 4.8 28.0 31.7 2 X 5 1/870000 401C703M050BF8 6.1 4.5 28.9 33.9 2 X 5 5/8

63 Vdc (90 Vdc Surge)4800 401C482M063AK8 50.0 28.2 6.9 8.3 1 3/8 X 1 5/87200 401C722M063AA8 32.4 19.6 8.9 10.7 1 3/8 X 2 1/8

11000 401C113M063AH8 24.1 14.7 11.2 13.0 1 3/8 X 2 5/812000 401C123M063EA8 26.0 19.3 9.9 11.8 1 3/4 X 2 1/813000 401C133M063AB8 19.0 11.6 13.0 15.6 1 3/8 X 3 1/815000 401C153M063BA8 19.3 14.7 11.9 14.8 2 X 2 1/816000 401C163M063AJ8 15.8 9.7 14.2 17.7 1 3/8 X 3 5/817000 401C173M063EH8 18.3 13.7 12.5 14.9 1 3/4 X 2 5/819000 401C193M063AC8 13.6 8.5 14.9 19.8 1 3/8 X 4 1/822000 401C223M063BH8 14.1 10.4 15.3 18.9 2 X 2 5/823000 401C233M063EB8 12.7 7.6 16.3 21.5 1 3/8 X 4 5/823000 401C233M063AD8 14.3 10.7 15.3 18.1 1 3/4 X 3 1/826000 401C263M063AE8 11.6 7.0 17.7 23.3 1 3/8 X 5 1/828000 401C283M063EJ8 11.9 8.9 17.3 20.4 1 3/4 X 3 5/8



CORNELLDUBILIER


Aluminum


RatingsESR Max. 25 °C Ripple Amps, 85 °C Nom Size

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D X L F Number (mΩ) (mΩ) (A) (A) (in)

29000 401C293M063BB8 10.8 6.6 19.1 25.1 1 3/8 X 5 5/829000 401C293M063AF8 11.1 8.2 18.1 22.4 2 X 3 1/834000 401C343M063EC8 10.3 7.7 19.2 22.6 1 3/4 X 4 1/836000 401C363M063BJ8 9.6 6.9 22.2 24.9 2 X 3 5/839000 401C393M063ED8 9.2 6.9 21.4 25.1 1 3/4 X 4 5/842000 401C423M063BC8 8.3 6.0 24.0 26.8 2 X 4 1/845000 401C453M063EE8 8.3 6.3 23.7 27.7 1 3/4 X 5 1/850000 401C503M063BD8 7.7 5.9 26.3 30.5 1 3/4 X 5 5/850000 401C503M063EF8 7.4 5.4 25.8 29.1 2 X 4 5/859000 401C593M063BE8 6.7 4.8 27.7 31.7 2 X 5 1/866000 401C663M063BF8 6.2 4.5 28.6 33.8 2 X 5 5/8

75 Vdc (100 Vdc Surge)2500 401C252M075AK8 93.8 46.0 5.7 6.4 1 3/8 X 1 5/84100 401C412M075AA8 59.0 29.1 7.6 8.6 1 3/8 X 2 1/86600 401C662M075AH8 39.8 19.7 9.7 10.7 1 3/8 X 2 5/87900 401C792M075EA8 41.0 21.2 9.0 10.7 1 3/4 X 2 1/88200 401C822M075AB8 30.3 15.1 11.4 13.1 1 3/8 X 3 1/8

10000 401C103M075BA8 30.8 17.5 9.0 14.3 2 X 2 1/810000 401C103M075AJ8 24.6 12.4 12.2 15.0 1 3/8 X 3 5/811000 401C113M075EH8 28.7 14.9 11.4 13.6 1 3/4 X 2 5/812000 401C123M075AC8 20.9 10.7 12.9 17.0 1 3/8 X 4 1/814000 401C143M075BH8 18.3 9.4 14.2 18.7 1 3/8 X 4 5/814000 401C143M075AD8 21.7 12.3 13.0 17.8 2 X 2 5/815000 401C153M075EB8 22.3 11.7 13.9 16.6 1 3/4 X 3 1/816000 401C163M075AE8 16.3 8.5 15.5 20.4 1 3/8 X 5 1/818000 401C183M075BB8 14.9 7.9 16.9 22.2 1 3/8 X 5 5/818000 401C183M075EJ8 18.3 9.7 15.8 18.7 1 3/4 X 3 5/818000 401C183M075AF8 16.8 9.7 15.4 21.6 2 X 3 1/822000 401C223M075EC8 15.7 8.3 17.6 20.8 1 3/4 X 4 1/823000 401C233M075BJ8 13.9 8.1 21.3 24.1 2 X 3 5/825000 401C253M075ED8 13.8 7.4 19.7 23.2 1 3/4 X 4 5/827000 401C273M075BC8 12.0 7.0 20.4 26.0 2 X 4 1/828000 401C283M075EE8 12.4 6.7 21.8 25.7 1 3/4 X 5 1/831000 401C313M075BD8 10.6 6.2 22.3 28.3 2 X 4 5/833000 401C333M075EF8 12.8 6.2 24.3 28.4 1 3/4 X 5 5/837000 401C373M075BE8 9.3 5.6 24.4 30.8 2 X 5 1/841000 401C413M075BF8 8.6 5.2 26.2 32.9 2 X 5 5/8

100 Vdc (140 Vdc Surge)1400 401C142M100AK8 118 34.7 4.3 6.2 1 3/8 X 1 5/82200 401C222M100AA8 73.1 20.9 5.9 8.5 1 3/8 X 2 1/83500 401C352M100AH8 46.5 14.0 7.5 10.6 1 3/8 X 2 5/84100 401C412M100EA8 44.7 17.5 8.0 10.3 1 3/4 X 2 1/84600 401C462M100AB8 36.0 11.0 9.1 12.9 1 3/8 X 3 1/85300 401C532M100BA8 37.5 16.5 8.2 11.9 2 X 2 1/85700 401C572M100AJ8 29.6 9.2 10.5 14.7 1 3/8 X 3 5/86000 401C602M100EH8 31.3 12.4 10.2 13.1 1 3/4 X 2 5/86800 401C682M100AC8 25.3 8.1 11.9 16.5 1 3/8 X 4 1/87500 401C752M100BH8 26.3 11.7 10.6 15.3 2 X 2 5/87900 401C792M100EB8 22.2 7.2 13.2 18.1 1 3/8 X 4 5/87900 401C792M100AD8 24.2 9.7 12.5 15.9 1 3/4 X 3 1/89000 401C902M100AE8 19.9 6.6 14.5 19.8 1 3/8 X 5 1/89700 401C972M100EJ8 19.9 8.1 14.1 18.0 1 3/4 X 3 5/8

10000 401C103M100BB8 20.4 9.2 12.6 18.2 2 X 3 1/810000 401C103M100AF8 18.1 6.2 15.8 21.4 1 3/8 X 5 5/812000 401C123M100BJ8 15.8 6.9 16.3 23.6 2 X 4 1/812000 401C123M100EC8 17.0 7.0 15.8 20.0 1 3/4 X 4 1/8


12000 401C123M100BC8 16.9 7.6 15.5 22.3 2 X 3 5/813000 401C133M100ED8 14.9 6.2 17.6 22.2 1 3/4 X 4 5/815000 401C153M100BD8 13.4 5.7 19.6 24.6 1 3/4 X 5 1/815000 401C153M100EE8 13.6 6.3 17.9 25.6 2 X 4 5/817000 401C173M100EF8 13.8 5.3 21.8 27.2 1 3/4 X 5 5/818000 401C183M100BE8 11.8 5.5 19.8 28.1 2 X 5 1/820000 401C203M100BF8 10.8 5.1 21.4 30.3 2 X 5 5/8

150 Volts (200 Volts Surge)710 401C711M150AK8 342 245 2.6 3.6 1 3/8 X 1 5/8

1100 401C112M150AA8 228 164 3.7 5.0 1 3/8 X 2 1/81500 401C152M150AH8 159 114 4.5 6.3 1 3/8 X 2 5/81700 401C172M150EA8 145 101 5.3 7.1 1 3/4 X 2 1/81900 401C192M150AB8 122 87.2 5.5 7.7 1 3/8 X 3 1/82500 401C252M150AJ8 112 78.8 7.0 8.6 2 X 2 1/82500 401C252M150BA8 98.8 71.0 6.4 8.9 1 3/8 X 3 5/82600 401C262M150EH8 100 70.3 6.7 9.0 1 3/4 X 2 5/82900 401C292M150AC8 83.4 59.9 7.4 10.2 1 3/8 X 4 1/83400 401C342M150AD8 80.2 57.0 8.9 11.0 2 X 2 5/83400 401C342M150EB8 77.0 54.0 8.3 11.1 1 3/4 X 3 1/83400 401C342M150BH8 72.3 52.0 8.2 11.3 1 3/8 X 4 5/83900 401C392M150AE8 63.9 46.0 9.2 12.4 1 3/8 X 5 1/84200 401C422M150EJ8 62.6 43.9 9.5 12.6 1 3/4 X 3 5/84400 401C442M150AF8 62.9 41.4 10.1 13.5 1 3/8 X 5 5/84500 401C452M150BB8 60.1 44.2 10.7 13.2 2 X 3 1/85000 401C502M150EC8 52.9 37.2 10.7 14.1 1 3/4 X 4 1/85500 401C552M150BJ8 48.6 36.3 12.9 16.2 2 X 3 5/85800 401C582M150ED8 45.9 32.3 12.0 15.8 1 3/4 X 4 5/86600 401C662M150BC8 41.1 31.2 13.7 17.6 2 X 4 1/86700 401C672M150EE8 40.6 28.6 13.5 17.5 1 3/4 X 5 1/87300 401C732M150BD8 38.0 28.0 14.7 19.2 2 X 4 5/87400 401C742M150EF8 36.5 25.7 15.1 19.3 1 3/4 X 5 5/88400 401C842M150BE8 34.1 25.2 15.7 20.9 2 X 5 1/89400 401C942M150BF8 31.0 23.0 16.8 22.6 2 X 5 5/8

200 Vdc (250 Vdc Surge)520 401C521M200AK8 370 233 2.5 3.5 1 3/8 X 1 5/8810 401C811M200AA8 247 156 3.4 4.9 1 3/8 X 2 1/8

1100 401C112M200AH8 172 111 4.2 6.1 1 3/8 X 2 5/81300 401C132M200EA8 151 96.2 4.8 7.0 1 3/4 X 2 1/81500 401C152M200AB8 132 86.6 5.2 7.5 1 3/8 X 3 1/81800 401C182M200AJ8 124 80.8 6.6 8.4 2 X 2 1/81800 401C182M200BA8 107 71.8 6.0 8.8 1 3/8 X 3 5/81900 401C192M200EH8 105 72.4 6.2 8.9 1 3/4 X 2 5/82200 401C222M200AC8 90.2 61.8 6.9 10.1 1 3/8 X 4 1/82500 401C252M200EB8 89.0 58.1 8.4 10.8 2 X 2 5/82500 401C252M200AD8 81.8 54.4 7.7 11.0 1 3/8 X 4 5/82500 401C252M200BH8 80.4 55.6 7.6 10.9 1 3/4 X 3 1/82800 401C282M200AE8 75.4 49.2 8.6 12.0 1 3/8 X 5 1/83100 401C312M200EJ8 65.4 45.2 8.7 12.4 1 3/4 X 3 5/83300 401C332M200AF8 66.6 44.7 10.1 12.9 2 X 3 1/83300 401C332M200BB8 70.1 45.1 9.5 12.9 1 3/8 X 5 5/83700 401C372M200EC8 55.2 38.2 9.8 13.9 1 3/4 X 4 1/84000 401C402M200BJ8 53.9 36.4 12.0 15.9 2 X 3 5/84400 401C442M200ED8 47.8 33.2 11.0 15.6 1 3/4 X 4 5/84800 401C482M200BC8 45.5 30.8 12.9 17.3 2 X 4 1/84900 401C492M200EE8 42.3 29.4 12.4 17.5 1 3/4 X 5 1/85500 401C552M200EF8 42.1 27.4 14.0 18.9 2 X 4 5/8

5500 401C552M200BD8 38.0 26.4 13.9 19.5 1 3/4 X 5 5/86200 401C622M200BE8 37.7 24.3 14.8 20.6 2 X 5 1/87000 401C702M200BF8 34.3 21.9 15.5 22.2 2 X 5 5/8

250 Vdc (300 Vdc Surge)380 401C381M250AK8 510 285 2.2 3.3 1 3/8 X 1 5/8610 401C611M250AA8 309 190 3.1 4.7 1 3/8 X 2 1/8860 401C861M250AH8 215 132 3.9 6.0 1 3/8 X 2 5/8960 401C961M250EA8 222 113 4.4 6.6 1 3/4 X 2 1/8

1100 401C112M250AB8 165 101 4.7 7.3 1 3/8 X 3 1/81300 401C132M250AJ8 134 82.5 5.5 8.3 1 3/8 X 3 5/81400 401C142M250EH8 149 91.2 5.9 8.3 2 X 2 1/81400 401C142M250BA8 154 78.6 5.6 8.5 1 3/4 X 2 5/81700 401C172M250AC8 101 62.4 6.9 10.3 1 3/8 X 4 5/81700 401C172M250AD8 100 62.2 6.6 10.0 1 3/8 X 4 1/81800 401C182M250EB8 118 60.4 6.9 10.4 1 3/4 X 3 1/81900 401C192M250BH8 103 63.3 7.6 10.6 2 X 2 5/82000 401C202M250AE8 88.8 54.9 7.7 11.2 1 3/8 X 5 1/82300 401C232M250EJ8 79.3 49.2 8.6 12.2 1 3/8 X 5 5/82300 401C232M250AF8 96.0 49.1 7.9 11.8 1 3/4 X 3 5/82500 401C252M250BB8 79.3 48.7 9.1 12.7 2 X 3 1/82800 401C282M250EC8 81.0 41.5 8.9 13.3 1 3/4 X 4 1/83000 401C302M250BJ8 64.5 39.7 11.0 15.7 2 X 3 5/83100 401C312M250ED8 70.2 36.0 10.1 14.9 1 3/4 X 4 5/83600 401C362M250EE8 62.0 31.9 11.3 16.7 1 3/4 X 5 1/83700 401C372M250BC8 54.5 33.6 11.9 17.2 2 X 4 1/83900 401C392M250EF8 55.6 28.6 12.7 18.6 1 3/4 X 5 5/84200 401C422M250BD8 47.3 29.2 12.8 18.7 2 X 4 5/84800 401C482M250BE8 41.9 25.9 13.6 20.0 2 X 5 1/85300 401C532M250BF8 37.6 23.3 14.4 21.2 2 X 5 5/8





CORNELLDUBILIER


Alum

inum

Radi

al L

eade

dCa

paci

tors

RatingsESR Max. 25 °C Ripple Amps, 85 °C Nom Size

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D X L F Number (mΩ) (mΩ) (A) (A) (in)

2.153

CORNELLDUBILIER


Aluminum


1605 East Rodney French BoulevardNew Bedford, MA 02744(508) 996-8564, Fax (508) 996-3830http://www.cornell-dubilier.comE-mail: [email protected]

Type NLW, 105 °C, Miniature Computer Grade, Axial Leaded

105 °C, Miniature Computer GradeDesigned for industrial applications requiring resistanceto vibration and extended operating temperatures,Type NLW combines low DCL and ESR to providesuperior performance.

Highlights Rugged Construction Extended Life Low DCL and ESR Extended Temperature Subminiature, high capacitance, low cost


Rated Voltage: 6.3 to 150 VdcCapacitance: 1F to 600 F

Capacitance Tolerance: 10 +75%Leakage Current: <25 Vdc 0.1CV +2 A

25 Vdc 0.2CV +2 ARipple Current Multipliers: Ambient Temperature

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up0-60 Vdc 0.85 1.00 1.10 1.15 1.15 1.15 1.15

61-150 Vdc 0.83 1.00 1.15 1.20 1.20 1.20 1.20

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.61 1.48 1.34 1.18 1.00 0.77 0.45

Load Life: 1,000 h @ +105 °C Capacitance 20%ESR 200% of limitDCL 200% of limit

Shelf Life: 1,000 h at 105 °C Capacitance 20%, ESR 200% of limit, DCL 200% of limit

Vibration: 10 to 55 Hz; 0.06” and 10 g max, 2 h in each plane

Outline Drawings

ripple

life556

p 2.155

556p 2.155

F 556p 2.155

MORE

1.5” min L 1.5” min

20AWG

D

2.154

CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rs

1605 East Rodney French BoulevardNew Bedford, MA 02744



Ratings


1 NLW1-50 200.0 0.020 0.28 x 0.572 NLW2-50 100.0 0.026 0.28 x 0.573 NLW3-50 67.0 0.030 0.28 x 0.574 NLW4-50 50.0 0.034 0.28 x 0.575 NLW5-50 40.0 0.037 0.28 x 0.576 NLW6-50 33.0 0.039 0.28 x 0.578 NLW8-50 25.0 0.046 0.28 x 0.69

10 NLW10-50 20.0 0.052 0.28 x 0.6915 NLW15-50 13.5 0.068 0.32 x 0.6920 NLW20-50 10.0 0.076 0.32 x 0.7625 NLW25-50 8.0 0.090 0.34 x 0.8130 NLW30-50 6.6 0.115 0.40 x 0.7635 NLW35-50 5.7 0.130 0.40 x 0.8840 NLW40-50 5.0 0.138 0.40 x 0.8850 NLW50-50 4.0 0.160 0.40 x 0.9475 NLW75-50 2.7 0.200 0.40 x 1.06

100 NLW100-50 2.0 0.250 0.40 x 1.32125 NLW125-50 1.6 0.310 0.40 x 1.57


2 NLW2-100 100.0 0.020 0.28 x 0.5710 NLW10-100 20.0 0.082 0.40 x 0.8815 NLW15-100 13.5 0.104 0.40 x 0.9420 NLW20-100 10.0 0.122 0.40 x 1.0625 NLW25-100 8.0 0.133 0.40 x 1.06


1 NLW1-150 200.0 0.020 0.28 x 0.572 NLW2-150 100.0 0.028 0.28 x 0.573 NLW3-150 67.0 0.038 0.32 x 0.765 NLW5-150 40.0 0.049 0.34 x 0.88

10 NLW10-150 20.0 0.088 0.40 x 0.9412 NLW12-150 17.0 0.100 0.40 x 1.06


200 NLW200-6 2.0 0.25 0.40 x 0.88


15 NLW15-12 17.7 0.056 0.28 x 0.57100 NLW100-12 3.3 0.150 0.32 x 0.81200 NLW200-12 1.7 0.270 0.40 x 0.94250 NLW250-12 1.3 0.290 0.40 x 0.94






10 NLW10-25 26.5 0.047 0.28 x 0.5715 NLW15-25 17.7 0.056 0.28 x 0.5720 NLW20-25 13.3 0.063 0.28 x 0.5725 NLW25-25 10.6 0.082 0.32 x 0.6935 NLW35-25 7.6 0.094 0.34 x 0.7640 NLW40-25 6.7 0.098 0.34 x 0.7650 NLW50-25 5.3 0.115 0.34 x 0.8175 NLW75-25 3.6 0.175 0.40 x 0.88


Type NLW, 105 °C, Miniature Computer Grade, Axial LeadedPart Numbering System

NLW 500 6 E

Type Capacitance Voltage Options500 = 500 F 6 = 6 Vdc E = Epoxy End Seal

(blank) = no epoxyPVC sleeve and 10 + 75% tolerance

Ripple A NominalCap. Catalog ESR Max.Ω @ 85 °C Size (in)F Number 120 Hz 120 Hz D x L

Ripple A NominalCap. Catalog ESR Max.Ω @ 85 °C Size (in)F Number 120 Hz 120 Hz D x L

For epoxy add the following to lenghtcan 0.197 - 0.315 0.0512 Ldia. 0.394 - 0.512 0.0630 (in)(in) 0.630 - 0.709 0.0709

140 Technology PlaceLiberty, SC 29657Phone (864) 843-2277, Fax (864) 843-3800http://www.cornell-dubilier.comE-mail: [email protected] 2.155

CORNELLDUBILIER


Aluminum


Type 556, 105 °C, Computer Grade, Axial Leaded, Aluminum

105 °C, Computer GradeType 556 capacitors are designed for data processing,telecom and instrumentation applications requiringsmaller size with extended temperature range. Theyhave longer life and up to twice the ripple capabilityof +85 °C capacitors.

Highlights Small size Extended life Extended temperature Twice ripple capability of +85 C capacitors Designed for data processing, telecom

and instrumentation applications

Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz+0-60 Vdc 0.85 1.00 1.10 1.15 1.15 1.15 1.15

61-150 Vdc 0.83 1.00 1.15 1.20 1.20 1.20 1.20

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.50 1.46 1.32 1.17 1.00 0.79 0.50

Load Life: 4,000 h @ +105 °C, capacitance 20%, ESR 200% of limit, DCL 100% of limitShelf Life: 100 h at 105 °C, capacitance, ESR & DCL, initial requirements.Vibration: 10 to 55 Hz; 0.06” and 10 g max, 2 h. in each plane

Outline Drawings

Temp

066Rp 2.160

557 UHLp 2.168

F

Life557 UHLp 2.168

MORE

38 mm min. L

20 AWG 0.81

D

SpecificationsOperating Temperature Range: 40 °C to +105 °C

Rated Voltage Range: 6.3 to 450 VdcCapacitance: 1.5 F to 6,800 F

Capacitance Tolerance: 20%Leakage Current: 3-20 Vdc 0.1 CV +2 A

25 Vdc & up 0.2 CV +2 ARipple Current: Ambient Temperature

38 mm min.




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rsType 556, 105 °C, Computer Grade, Axial Leaded, Aluminum



CORNELLDUBILIER


Aluminum



120 556121M6R3BA2 3.60 0.109 6.3 x 13220 556221M6R3BB2 2.00 0.18O 6.3 x 17.5330 556331M6R3CB2 1.29 0.255 8 x 17.5470 556471M6R3CC2 1.00 0.338 8 x 20.5820 556821M6R3DC2 0.64 0.480 9.5 x 20.5

1200 556122M6R3DD2 0.37 0.570 9.5 x 241800 556182M6R3DF2 0.27 0.800 9.5 x 322200 556222M6R3DH2 0.23 1.080 9.5 x 383900 556392M6R3MH2 0.16 1.280 11 x 384700 556472M6R3EH2 0.13 1.640 12.5 x 385600 556562M6R3ER2 0.12 1.780 12.5 x 44.56800 556682M6R3FH2 0.10 2.000 16 x 38

10000 556103M6R3FR2 0.09 2.350 16 x 44.512000 556123M6R3LV2 0.08 2.580 18 x 44.5


100 556101M010BA2 3.70 0.109 6.3 x 13180 556181M010BB2 2.08 0.175 6.3 x 17.5270 556271M010CB2 1.60 0.250 8 x 17.5390 556391M010CC2 0.96 0.350 8 x 20.5680 556681M010DC2 0.57 0.440 9.5 x 20.5

Type 556,105 C Computer Grade, Axial Leaded, Aluminum

Part Numbering System556 123 M 6R3 LV 2 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy Endseal6R8=6.8 F M=20% 6R3=6.3 Vdc 0=Bare Can E = Epoxy Endseal680=68 F 063=63 Vdc 1=Polyester (blank) = No Epoxy

681=680 F 100=100 Vdc 2=PVC682=6800 F

123=12,000 F

MillimetersInsulated with

Case Nominal Insulated Epoxy EndsealCode Diameter (mm) Length (mm) Diameter (max) Length (max) Diameter (max) Length (max)

BA 6.3 13.0 7.0 14.4 7.0 15.9BB 6.3 17.5 7.0 19.2 7.0 20.7CB 8.0 17.5 8.6 19.2 8.6 20.7CC 8.0 20.5 8.6 22.3 8.6 23.8DC 9.5 20.5 10.2 22.3 10.2 23.8DD 9.5 24.0 10.2 25.5 10.2 27.0DF 9.5 32.0 10.2 33.5 10.2 35.0DH 9.5 38.0 10.2 39.8 10.2 41.3MF 11.0 32.0 11.8 33.8 11.8 35.0MH 11.0 38.0 11.8 39.8 13.1 41.3EH 12.5 38.0 13.1 39.8 13.1 41.3ER 12.5 44.0 13.1 46.5 13.1 48.0FH 16.0 38.0 16.6 39.8 16.6 41.3FR 16.0 44.5 16.6 46.5 16.6 48.0LV 18.0 40.0 18.7 42.5 18.7 43.0

Case Dimensions

RatingsRipple A Nominal

Cap. Catalog ESR Max.Ω @ 85 °C Size (mm)F Number 120 Hz 120 Hz D x L


1000 556102M010DD2 0.41 0.560 9.5 x 241500 556152M010DF2 0.30 0.785 9.5 x 321800 556182M010DH2 0.27 1.030 9.5 x 382200 556222M010MF2 0.19 1.160 11 x 323300 556332M010EH2 0.14 1.600 12.5 x 383300 556332M010MH2 0.15 1.380 11 x 384700 556472M010ER2 0.12 1.780 12.5 x 44.55600 556562M010FH2 0.10 2.000 16 x 388200 556822M010FR2 0.09 2.340 16 x 44.5

10000 556103M010LV2 0.08 2.550 18 x 40


100 556101M012BA2 3.71 0.108 6.3 x 13180 556181M012BB2 2.12 0.168 6.3 x 1 7.5220 556221M012CB2 1.65 0.245 8 x 17.5390 556391M012CC2 1.00 0.330 8 x 20.5560 556561M012DC2 0.66 0.425 9.5 x 20.5820 556821M012DD2 0.45 0.550 9.5 x 24

1200 556122M012DF2 0.32 0.760 9.5 x 321500 556152M012DH2 0.28 0.955 9.5 x 38

Ripple A NominalCap. Catalog ESR Max.Ω @ 85 °C Size (mm)F Number 120 Hz 120 Hz D x L




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rs

Ratings


680 556681M035MF2 0.39 0.780 11 x 321000 556102M035MH2 0.28 1.020 11 x 381200 556122M035EH2 0.23 1.090 12.5 x 381500 556152M035ER2 0.19 1.400 12.5 x 44.52700 556272M035FR2 0.15 2.000 16 x 44.53300 556332M035LV2 0.14 2.180 18 x 40


27 556270M040BA2 8.70 0.078 6.3 x l356 556560M040BB2 4.35 0.115 6.3 x 17.568 556680M040CB2 3.65 0.155 8 x 17.5

120 556121M040CC2 2.05 0.223 8 x 20.5180 556181M040DC2 1.36 0.300 9.5 x 20.5270 556271M040DD2 0.96 0.397 9.5 x 24390 556391M040DF2 0.63 0.570 9.5 x 32560 556561M040DH2 0.44 0.702 9.5 x 38680 556681M040MF2 0.37 0.950 11 x 32

1000 556102M040EH2 0.24 1.080 12.5 x 381000 556102M040MH2 0.25 1.000 11 x 381200 556122M040ER2 0.21 1.330 12.5 x 44.52200 556222M040FR2 0.15 1.870 16 x 44.52700 556272M040LV2 0.14 2.070 18 x 40


22 556220M050BA2 11.70 0.067 6.3 x 1339 556390M050BB2 6.63 0.100 6.3 x 17.547 556470M050CB2 5.50 0.130 8 x l7.582 556820M050CC2 3.15 0.190 8 x 20.5

120 556121M050DC2 2.15 0.250 9.5 x 20.5180 556181M050DD2 1.43 0.335 9.5 x 24270 556271M050DF2 1.05 0.450 9.5 x 32390 556391M050DH2 0.66 0.600 9.5 x 38470 556471M050MF2 0.55 0.660 11 x 32680 556681M050EH2 0.38 0.975 12.5 x 38680 556681M050MH2 0.38 0.880 11 x 38

1000 556102M050ER2 0.26 1.210 12.5 x 44.51200 556122M050FH2 0.22 1.400 16 x 381500 556152M050FR2 0.18 1.670 16 x 44.51800 556182M050LV2 0.14 1.920 18 x 40


18 556180M063BA2 13.60 0.060 6.3 X 1333 556330M063BB2 7.50 0.090 6.3 X 17.539 556390M063CB2 6.30 0.120 8 X 17.568 556680M063CC2 3.50 0.175 8 X 20.5

100 556101M063DC2 2.40 0.242 9.5 X 20.5150 556151M063DD2 1.63 0.300 9.5 X 24220 556221M063DF2 1.08 0.420 9.5 X 32330 556331M063DH2 0.72 0.575 9.5 X 38390 556391M063MF2 0.63 0.652 11 X 32470 556471M063MH2 0.51 0.750 11 X 38560 556561M063EH2 0.42 0.880 12.5 X 38820 556821M063ER2 0.30 1.130 12.5 X 44.5

1000 556102M063FH2 0.24 1.340 16 X 381200 556122M063FR2 0.20 1.560 16 X 44.51500 556152M063LV2 0.15 1.850 18 40


5.6 5565R6M080BA2 28.40 0.043 6.3 x 1310 556100M080BB2 15.80 0.070 6.3 x 17.515 556150M080CB2 10.60 0.097 8 x 17.522 556220M080CC2 7.23 0.126 8 x 20.5




68 556680M016BA2 4.70 0.107 6.3 x 13120 556121M016BB2 2.60 0.162 6.3 x 17.5180 556181M016CB2 1.90 0.230 8 x 17.5330 556331M016CC2 1.12 0.320 8 x 20.5560 556561M016DC2 0.68 0.420 9.5 x 20.5680 556681M016DD2 0.60 0.540 9.5 x 24

1000 556102M016DF2 0.38 0.740 9.5 x 321500 556152M016DH2 0.36 0.950 9.5 x 381800 556182M016MF2 0.24 1.070 11 x 322700 556272M016EH2 0.15 1.540 12.5 x 382700 556272M016MH2 0.16 1.380 11 x 383300 556332M016ER2 0.14 1.710 12.5 x 44.55600 556562M016FR2 0.08 2.320 16 x 44.56800 556682M016LV2 0.08 2.570 18 x 40


68 556680M020BA2 4.80 0.105 6.3 x 13120 556121M020BB2 2.60 0.161 6.3 x 17.5150 556151M020CB2 2.10 0.218 8 x 17.5270 556271M020CC2 1.22 0.305 8 x 20.5470 556471M020DC2 0.7 0.405 9.5 x 20.5680 556681M020DD2 0.50 0.500 9.5 x 24820 556821M020DF2 0.35 0.700 9.5 x 32

1200 556122M020DH2 0.25 0.900 9.5 x 381500 556152M020MF2 0.22 0.990 11 x 322200 556222M020EH2 0.18 1.370 12.5 x 382200 556222M020ER2 0.18 1.460 12.5 x 44.54700 556472M020FR2 0.09 2.320 16 x 44.55600 556562M020LV2 0.07 2.400 18 x 40


77 556470M025BA2 6.00 0.093 6.3 x 1382 556820M025BB2 3.50 0.140 6.3 x 17.5

100 556101M025CB2 3.00 0.180 8 x 17.5180 556181M025CC2 2.00 0.260 8 x 20.5270 556271MO25DC2 1.10 0.360 9.5 x 20.5390 556391M025DD2 0.80 0.450 9.5 x 24560 556561M025DF2 0.54 0.615 9.5 x 32820 556821M025DH2 0.38 0.825 9.5 x 38



33 556330M035BA2 8.18 0.080 6.3 x 1356 556560M035BB2 4.90 0.117 6.3 x 17.568 556680M035CB2 3.93 0.160 8 x 17.5

120 556121M035CC2 2.26 0.225 8 x 20.5220 556221M035DC2 1.25 0.325 9.5 x 20.5270 556271M035DD2 1.00 0.400 9.5 x 24470 556471M035DF2 0.58 0.590 9.5 x 32560 556561M035DH2 0.48 0.705 9.5 x 3





CORNELLDUBILIER


Aluminum


Ratings


47 556470M080DC2 3.38 0.205 9.5 x 20.568 556680M080DD2 2.34 0.260 9.5 x 24

100 556101M080DF2 1.59 0.357 9.5 x 32120 556121M080DH2 1.33 0.435 9.5 x 38150 556151M080MF2 1.06 0.480 11 x 32220 556221M080EH2 0.72 0.680 12.5 x 38220 556221M080MH2 1.06 0.527 11 x 38270 556271M080ER2 0.58 0.850 12.5 x 44.5390 556391M080FH2 0.41 1.030 16 x 38470 556471M080FR2 0.34 1.210 16 x 44.5680 556681M080LV2 0.23 1.490 18 x 44.5


3.9 5563R9M100BA2 40.70 0.035 6.3 x l36.8 5566R8M100BB2 23.70 0.054 6.3 x 17.512 556120M100CB2 13.30 0.080 8 x 17.515 556150M100CC2 10.60 0.100 8 x 20.533 556330M100DC2 4.81 0.145 9.5 x 20.547 556470M100DD2 3.38 0.205 9.5 x 2468 556680M100DF2 2.33 0.280 9.5 x 32

100 556101M100DH2 1.59 0.385 9.5 x 38150 556151M100EH2 1.06 0.585 12.5 x 38150 556151M100MH2 1.06 0.505 11 x 38220 556221M100ER2 0.72 0.715 12.5 x 44.5390 556391M100FR2 0.40 1.110 16 x 44.5470 556471M100LV2 0.34 1.240 18 x 40


1.5 5561R5M150BA2 110.00 0.023 6.3 x 132.7 5562R7M150BB2 60.00 0.036 6.3 x 17.53.3 5563R3M150CB2 49.00 0.045 8 x l7.56.8 5566R8M150CC2 24.00 0.070 8 x 20.512 556120M150DC2 13.30 0.100 9.5 x 20.515 556150M150DD2 11.00 0.120 9.5 x 2422 556220M150DF2 7.30 0.165 9.5 x 3233 556330M150DH2 4.90 0.225 9.5 x 3847 556470M150MH2 3.38 0.290 11 x 3856 556560M150EH2 3.08 0.325 12.5 x 3868 556680M150ER2 2.34 0.380 12.5 x 44.5

120 556121M150FR2 1.34 0.580 16 x 44.5150 556151M150LV2 1.10 0.668 18 x 40


1.2 5561R2M200BA2 132.00 0.022 6.3 x 132.7 5562R7M200BB2 60.00 0.035 6.3 x 17.53.3 5563R3M200CB2 50.00 0.045 8 x 17.55.6 5565R6M200CC2 28.00 0.065 8 x 20.510 556100M200DC2 15.90 0.090 9.5 x 20.512 556120M200DD2 12.00 0.105 9.5 x 2418 556180M200DF2 9.10 0.150 9.5 x 3227 556270M200DH2 6.00 0.200 9.5 x 3839 556390M200EH2 4.00 0.288 12.5 x 3839 556390M200MH2 4.50 0.250 11 x 3856 556560M200ER2 2.85 0.350 12.5 x 44.568 556680M200FH2 2.36 0.425 16 x 38

100 556101M200FR2 1.60 0.550 16 x 44.5120 556121M200LV2 1.33 0.610 18 x 40


1 5561R0M250BA2 161.00 0.021 6.3 x 131.8 5561R8M250BB2 88.00 0.031 6.3 x 17.52.2 5562R2M250CB2 73.00 0.037 8 x 17.53.3 5563R3M250CC2 48.00 0.049 8 x 20.5


6.8 5566R8M250DC2 23.50 0.078 9.5 x 20.58.2 5568R2M250DD2 19.40 0.090 9.5 x 2412 556120M250DF2 13.20 0.125 9.5 x 3218 556180M250DH2 8.80 0.165 9.5 x 3827 556270M250MH2 6.00 0.215 11 x 3833 556330M250EH2 4.80 0.240 12.5 x 3839 556390M250ER2 4.00 0.305 12.5 x 44.568 556680M250FR2 2.30 0.425 16 x 44.582 556820M250LV2 2.00 0.500 18 x 40


0.68 556R68M300BA2 235.00 0.016 6.3 x 131.2 556lR2M300BB2 133.00 0.024 6.3 x 17.51.5 5561R5M300CB2 107.00 0.030 8 x 17.52.2 5562R2MI300CC2 73.00 0.040 8 x 20.53.9 5563R9M300DC2 41.00 0.055 9.5 x 20.55.6 5565R6M300DD2 28.60 0.070 9.5 x 248.2 5568R2M300DF2 19.50 0.100 9.5 x 3210 556100M300DH2 16.00 0.120 9.5 x 3818 556180M300MH2 8.90 0.175 11 x 3822 556220M300EH2 7.27 0.200 12.5 x 3827 556270M300ER2 5.90 0.250 12.5 x 44.547 556470M300FR2 3.40 0.375 16 x 44.568 556680M300LV2 2.40 0.450 18 x 40


0.56 556R56M350BA2 284.00 0.014 6.3 x 131 5561R0M350BB2 159.00 0.022 6.3 x 17.5

1.2 5561R2M350CB2 132.00 0.027 8 x 17.51.8 5561R8M350CC2 88.40 0.036 8 x 20.53.3 5563R3M350DC2 48.00 0.054 9.5 x 20.54.7 5564R7M350DD2 33.80 0.065 9.5 x 246.8 5566R8M350D F2 23.50 0.077 9.5 x 3210 556100M350DH2 15.90 0.120 9.5 x 3818 556180M350MH2 8.84 0.175 11 x 3822 556220M350E H2 7.23 0.210 12.5 x 3827 556270M350ER2 6.00 0.250 12.5 x 44.539 556390M350FR2 4.18 0.340 16 x 44.556 556560M350LV2 3.00 0.400 18 x 40


1.8 5561R8M400DC2 92.00 0.038 9.5 x 20.52.7 5562R7M400DD2 62.00 0.050 9.5 x 243.9 5563R9M400DF2 42.00 0.070 9.5 x 324.7 5564R7M400DH2 35.00 0.082 9.5 x 3812 556120M400MH2 13.80 0.130 11x 3818 556180M400EH2 9.20 0.175 12.5 x 3822 556220M400ER2 7.60 0.220 12.5 x 44.527 556270M400FR2 6.10 0.250 16 x 44.547 556470M400LV2 3.50 0.375 18 x 40


1.5 5561R5M450DC2 115.00 0.035 9.5 x 20.52.2 5562R2M450DD2 78.00 0.045 9.5 x 243.3 5563R3M450DF2 52.00 0.062 9.5 x 323.9 5563R9M450DH2 44.00 0.074 9.5 x 3810 556100M450MH2 17.00 0.125 11 x 3812 556120M450EH2 9.50 0.200 12.5 x 3818 556180M450ER2 7.80 0.225 12.5 x 44.522 556220M450FR2 5.20 0.300 16 x 44.533 556330M450LV2 5.20 0.315 18 x 40







CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rsType 066/066R, 85 °C & 105 °C, Standard, Axial Leaded, Aluminum

85 °C & 105 °C, StandardIdeal for general purpose use where long life at ratedtemperature and operating voltage are important.Type 066 is equipped with a molded top and usesan o-ring to ensure a long life seal and an expectedlife of more than ten years in most applications.Type 066X has extra capacitance. Type 066R haslower ESR and higher ripple capability.

Highlights Long life, more than ten years in most applications Molded top Low DCL High Ripple General purpose

SpecificationsOperating Temperature: 40 °C to +85 °C (Type 066R 40 °C to +105 °C)

Rated Voltage: 6.3 to 450 VdcCapacitance: 8.2 F to 68,000 F

Capacitance Tolerance: 10 + 75%Leakage Current: 0.005 CV A @ +25 °C, 0.04 CV A @ 85 °C


Frequency

50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz+0-60 F 0.85 1.00 1.10 1.15 1.15 1.15 1.15

61-200 F 0.83 1.00 1.15 1.20 1.20 1.20 1.20

201-450 F 0.80 1.00 1.15 1.30 1.30 1.30 1.30

Type 45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C066 2.24 2.00 1.73 1.41 1.00 0.0 0.0066R 1.68 1.54 1.38 1.21 1.00 0.74 0.30


Shelf Life: 100 h at 85 °C, capacitance, ESR and DCL, initial requirementsVibration: 10 to 55 Hz; 0.06” and 10 g max, 2 h. in each plane

Outline Drawings

Ripple

057p 2.172

057p 2.172

ColdMORE

1.5” min

(38mm min)

L

d

D

d = 20 AWG for D < 0.75”, 18 AWG for D 0.75”

1.5” min

(38mm min)


CORNELLDUBILIER


Aluminum



Type 066/066R, 85 °C & 105 °C, Standard, Axial Leaded, Aluminum

Part Numbering System066 682 U 6R3 JE 2 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy Endseal066 6R8=6.8 F U=10%+75% 6R3=6.3 Vdc 0 = Bare Can E = Epoxy

066X 680=68 F T=10%+50% 063=63 Vdc 1 = Polyester (blank) = No Epoxy066R 681=680 F 100=100 Vdc 2 = PVC

682=6800 F

Case Inches mm Case Inches mmCode D .016 L max D .397 L max Code D .016 L max D .397 L max

FE .635 1.250 16.13 31.75 HE .885 1.250 22.48 31.75FJ .635 1.750 16.13 44.45 HJ .885 1.750 22.48 44.45FL .635 2.250 16.13 57.15 HL .885 2.250 22.48 57.15FP .635 2.750 16.13 69.85 HP .885 2.750 22.48 69.85FS .635 3.250 16.13 82.55 HS .885 3.250 22.48 82.55FT .635 3.750 16.13 95.25 HT .885 3.750 25.65 95.25GE .760 1.250 19.30 31.75 JE 1.010 1.250 25.65 31.75GJ .760 1.750 19.30 57.15 JJ 1.010 1.750 25.65 44.45GL .760 2.250 19.30 69.85 JL 1.010 2.250 25.65 44.45GP .760 2.750 19.30 69.85 JP 1.010 2.750 25.65 57.15GS .760 3.250 19.30 82.55 JS 1.010 3.250 25.65 69.85GT .760 3.750 19.30 95.25 JT 1.010 3.75 25.65 82.55

Case Dimensions

Impedance vs. Frequency - 800 F @ 25 Vdc Temperature Characteristics - 800 F @ 25 Vdc




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rs

Ratings

7.5 Vdc (9 Vdc Surge) (cont’d)

47000 066R473U7R5JS2 0.042 0.024 6.2 7.0 1 X 3 1/847000 066X473U7R5JP2 0.049 0.028 3.7 4.3 1 X 2 5/856000 0662563U7R5JT2 0.037 0.022 6.9 7.8 1 X 3 5/856000 066X563U7R5JS2 0.042 0.024 4.3 4.9 1 X 3 1/868000 066X683U7R5JT2 0.037 0.022 4.9 5.5 1 X 3 5/8


1200 066122U010FE2 0.520 0.281 0.67 0.86 5/8 X 1 1/81800 066182U010GE2 0.340 0.185 0.84 1.1 3/4 X 1 1/82700 066272U010FJ2 0.260 0.141 1.1 1.4 5/8 X 1 5/83900 066392U010GJ2 0.170 0.096 1.4 1.8 3/4 X 1 5/83900 066R392U010GE2 0.340 0.185 1.2 1.5 3/4 X 1 1/84700 066X472U010GE2 0.340 0.185 0.84 1.1 3/4 X 1 1/85600 066562U010HJ2 0.120 0.065 1.8 2.2 7/8 X 1 5/86800 066682U010GP2 0.094 0.052 3.5 4.3 3/4 X 2 5/88200 066822U010HL2 0.081 0.045 2.5 3.1 7/8 X 2 1/88200 066R822U010GJ2 0.170 0.096 2.0 2.5 3/4 X l 5/8

10000 066X103U010GJ2 0.170 0.096 1.4 1.8 3/4 X 1 5/812000 066123U010HJ2 0.120 0.065 2.6 3.1 7/8 X 1 5/812000 066123U010JL2 0.063 0.036 3.0 3.5 1 X 2 1/815000 066153U010HS2 0.053 0.03 3.7 4.4 7/8 X 3 1/815000 066X153U010HJ2 0.120 0.065 1.8 2.2 7/8 X l 5/818000 066LR183U010HL2 0.081 0.045 3.6 4.3 7/8 X 2 1/818000 066183U010JP2 0.050 0.029 3.7 4.3 1 X 2 5/822000 066223U010JS2 0.042 0.024 4.3 4.9 1 X 3 1/822000 066X223U010HL2 0.081 0.045 2.5 3.1 7/8 X 2 1/827000 066273U010JT2 0.037 0.022 4.9 5.5 1 X 3 5/827000 066R273U010JL2 0.063 0.036 4.3 5.0 1 x 2 1/833000 066R333U010JP2 0.049 0.028 5.3 6.1 1 x 2 5/833000 066X333U010JL2 0.063 0.036 3.0 3.5 1 x 2 1/839000 066X393U010JP2 0.049 0.028 3.7 4.3 1 x 2 5/847000 066R473U010JS2 0.042 0.024 6.2 7.0 1 x 3 1/847000 066X473U010JS2 0.042 0.024 4.3 4.9 1 x 3 l/856000 066R563U010JT2 0.037 0.022 6.9 7.8 1 x 3 5/856000 066X563U010JT2 0.037 0.022 4.9 5.5 1 x 3 5/8


1000 066102U016FE2 0.520 0.281 0.67 0.86 5/8 X 1 1/81500 066152U016GE2 0.340 0.185 0.84 1.1 3/4 X 1 1/82200 066222U016FJ2 0.260 0.141 1.1 1.4 5/8 X 1 5/82700 066R272U016GE2 0.340 0.185 1.2 1.5 4/4 X 1 1/83300 066332U016GJ2 0.170 0.096 1.4 1.8 3/4 X l 5/83300 066X332U016GE2 0.340 0.185 0.84 1.1 3/4 x 1 l/84700 066472U016HJ2 0.120 0.065 1.8 2.2 7/8 x 1 5/85600 066R562U016GJ2 0.170 0.096 2.0 2.5 3/4 x 1 5/85600 066562U016GP2 0.094 0.052 3.5 4.3 3/4 x 2 5/86800 066682U016HL2 0.081 0.045 2.5 3.1 7/8 x 2 1/86800 066X682U016GJ2 0.170 0.096 1.4 1.8 3/4 x 1 5/88200 066R822U016HJ2 0.120 0.065 2.6 3.1 7/8 x 1 5/8

10000 066103U016JL2 0.063 0.036 3.0 3.5 1 x 2 1/810000 066X103U016HJ2 0.120 0.065 1.8 2.2 7/8 x 1 5/812000 066123U016HS2 0.053 0.03 3.7 4.4 7/8 x 3 1/812000 066R123U016HL2 0.081 0.045 3.6 4.3 7/8 x 2 1/815000 066153U016JP2 0.050 0.029 3.7 4.3 1 x 2 5/815000 066X153U016HL2 0.081 0.045 2.5 3.1 7/8 x 2 1/818000 066183U016JS2 0.042 0.024 4.3 4.9 1 x 3 1/818000 066R183U016JL2 0.063 0.036 4.3 5.0 1 x 2 1/8


1800 066182U6R3FE2 0.520 0.281 0.68 0.86 5/8 X 1 1/82700 066272U6R3GE2 0.340 0.185 0.85 1.1 3/4 X 1 1/83900 066392U6R3FJ2 0.260 0.141 1.10 1.4 5/8 X 1 5/84700 066472U6R3HE2 0.230 0.126 1.10 1.3 7/8 X 1 1/85600 066562U6R3GJ2 0.170 0.096 1.40 1.8 3/4 X 1 5/85600 066R562U6R3GE2 0.340 0.185 1.20 1.5 3/4 X 1 1/85600 066X562U6R3GE2 0.340 0.185 0.85 1.1 3/4 X 1 1/86800 066682U6R3JE2 0.180 0.104 1.30 1.5 1 X 1 1/88200 066822U6R3HJ2 0.120 0.065 1.80 2.2 7/8 X 1 5/8

10000 066103U6R3FS2 0.110 0.06 2.50 3.0 5/8 X 3 1/810000 066R103U6R3GJ2 0.170 0.096 2.00 2.5 3/4 X 1 5/812000 066123U6R3GP2 0.093 0.052 3.50 4.3 3/4 X 2 5/812000 066X123U6R3GJ2 0.170 0.096 1.40 1.8 3/4 X 1 5/815000 066153U6R3HL2 0.080 0.045 2.60 3.1 7/8 X 2 1/815000 066R153U6R3HJ2 0.120 0.065 2.60 3.1 7/8 X 1 5/818000 066183U6R3JL2 0.062 0.036 3 3.5 1 x 2 1/818000 066X183U6R3HJ2 0.120 0.065 1.8 2.2 7/8 x 1 5/822000 066223U6R3HS2 0.052 0.03 3.8 4.4 7/8 x 3 1/822000 066R223U6R3HL2 0.080 0.045 3.6 4.3 7/8 x 2 1/827000 066273U6R3JP2 0.049 0.029 3.7 4.3 1 x 2 5/827000 066X273U6R3HL2 0.080 0.045 2.6 3.1 7/8 x 2 1/833000 066333U6R3JS2 0.042 0.024 4.4 4.9 1 x 3 1/833000 066R333U6R3JL2 0.062 0.036 4.3 5.0 1 x 2 1/833000 066X333U6R3JL2 0.062 0.036 3 3.5 1 x 2 1/839000 066393U6R3JT2 0.037 0.022 4.9 5.5 1 x 3 5/847000 066R473U6R3JP2 0.049 0.028 5.3 6.1 1 X 2 5/847000 066X473U6R3JP2 0.049 0.028 3.8 4.3 1 X 2 5/856000 066R563U6R3JS2 0.041 0.024 6.2 7.0 1 X 3 1/856000 066X563U6R3JS2 0.041 0.024 4.4 4.9 1 X 3 1/868000 066R683U6R3JT2 0.037 0.022 7.0 7.8 1 X 3 5/868000 066X683U6R3JT2 0.037 0.022 4.9 5.5 1 X 3 5/8


1800 066182U7R5FE2 0.520 0.281 0.67 0.86 5/8 X 1 1/82700 066272U7RSGE2 0.340 0.185 0.84 1.1 3/4 X 1 1/83300 066332U7R5FJ2 0.260 0.141 1.10 1.4 5/8 X 1 5/83900 066392U7R5HE2 0.230 0.126 1.10 1.3 7/8 X 1 1/84700 066R472U7R5GE2 0.340 0.185 1.20 1.5 3/4 X 1 1/85600 066562U7R5GJ2 0.170 0.096 1.40 1.8 3/4 X 1 5/85600 066X562U7R5GE2 0.340 0.185 0.84 1.1 3/4 X 1 1/88200 066822U7R5FS2 0.110 0.06 2.40 3.0 5/8 X 3 1/88200 066822U7R5HJ2 0.120 0.065 1.80 2.2 7/8 X 1 5/8

10000 066103U7R5GP2 0.094 0.052 3.50 4.3 3/4 X 2 5/810000 066R103U7R5GJ2 0.170 0.096 2.00 2.5 3/4 X 1 5/812000 066123U7R5HL2 0.081 0.045 2.50 3.1 7/8 X 2 1/815000 066R153U7R5HJ2 0.120 0.065 2.60 3.1 7/8 X 1 5/815000 066X153U7R5HJ2 0.120 0.065 1.80 2.2 7/8 X 1 5/818000 066183U7R5JL2 0.063 0.036 3.00 3.5 1 X 2 1/822000 066223U7R5JP2 0.050 0.029 3.70 4.3 1 X 2 5/822000 066R223U7R5HL2 0.081 0.045 3.60 4.3 7/8 X 2 1/822000 066X223U7R5HL2 0.081 0.045 2.50 3.1 7/8 X 2 1/827000 066273U7R5JS2 0.042 0.024 4.30 4.9 1 X 3 1/833000 066333U7R5JT2 0.037 0.022 4.90 5.5 1 X 3 5/833000 066R333U7R5JL2 0.063 0.036 4.30 5.0 1 X 2 1/833000 066X333U7R5JL2 0.063 0.036 3.00 3.5 1 X 2 1/839000 066R393U7RSJP2 0.049 0.028 5.30 6.1 1 X 2 5/8


Ripple A NominalCap. Catalog ESR Max.Ω @ 85 °C Size (in)F Part Number 120 Hz 20 kHz 120 Hz 20 kHz D x L



CORNELLDUBILIER


Aluminum


Ratings



22000 066223U016JT2 0.037 0.022 4.9 5.5 1 x 3 5/822000 066R223U016JP2 0.049 0.028 5.3 6.1 1 x 2 5/822000 066X223U016JL2 0.063 0.036 3.0 3.5 1 x 2 1/827000 066R273U016JS2 0.042 0.024 6.2 7.0 1 x 3 1/827000 066X273U016JP2 0.049 0.028 3.7 4.3 1 x 2 5/833000 066R333U016JT2 0.037 0.022 6.9 7.8 1 x 3 5/833000 066X333U016JS2 0.042 0.024 4.3 4.9 1 x 3 1/839000 066X393U016JT2 0.037 0.022 4.9 5.5 1 x 3 5/8


560 066561U025FE2 0.510 0.267 0.66 0.87 5/8 x 11/8820 066821U025GE2 0.340 0.178 0.82 1.1 3/4 x 11/8

1000 066102U025FJ2 0.260 0.133 1.1 1.5 5/8 x 1 5/81200 066122U025HE2 0.240 0.126 1.1 1.3 7/8 x 1 1/81800 066182U025GJ2 0.170 0.089 1.4 1.8 3/4 x 1 5/81800 066R182U025GE2 0.330 0.170 1.2 1.5 3/4 x 1 1/82200 066X222U025GE2 0.330 0.170 0.84 1.1 3/4 x 1 1/82700 066272U025HJ2 0.120 0.065 1.8 2.1 7/8 x 1 5/83900 066392U025HL2 0.082 0.045 2.5 3.0 7/8 x 2 1/83900 066R392U025GJ2 0.170 0.089 2.0 2.6 3/4 x 1 5/84700 066X472U025GJ2 0.170 0.089 1.4 1.8 3/4 x 1 5/85600 066562U025JL2 0.066 0.037 2.8 3.3 1 x 2 1/85600 066R562U025HJ2 0.120 0.062 2.6 3.2 7/8 x 1 5/86800 066682U025JP2 0.051 0.030 3.5 4.1 1 x 2 5/86800 066X682U025HJ2 0.120 0.062 1.8 2.2 7/8 x 1 5/88200 066822U025JS2 0.043 0.025 4.1 4.7 1 x 3 1/88200 066R822U025HL2 0.080 0.043 3.6 4.4 7/8 x 2 1/8

10000 066103U025JT2 0.038 0.023 4.7 5.2 1 x 3 5/810000 066xl03U025HL2 0.080 0.043 2.5 3.1 7/8 x 2 l/812000 066R123U025JL2 0.062 0.035 4.2 5.0 1 x 2 1/815000 066R153U025JP2 0.049 0.027 5.2 6.1 1 x 2 5/815000 066X153U025JL2 0.062 0.035 3.0 3.5 1 x 2 1/818000 066X183U025JP2 0.049 0.027 3.7 4.3 1 x 2 5/822000 066R223U025JS2 0.041 0.024 6.1 7.0 1 x 3 1/822000 066R223U025JT2 0.037 0.021 6.9 7.8 1 x 3 5/822000 066X223U025JS2 0.041 0.024 4.3 5.0 1 x 3 1/827000 066X273U025JT2 0.037 0.021 4.9 5.5 1 x 3 5/8


470 066471U035FE2 0.540 0.267 0.64 0.86 5/8 x 1 1/8680 066681U035GE2 0.350 0.178 0.8 1.0 3/4 x 1 1/8820 066821U035FJ2 0.270 0.133 1.1 1.4 5/8 x 1 5/8

1200 066122U035HE2 0.250 0.126 1.0 1.3 7/8 x 1 1/81200 066R122LI035GE2 0.350 0.178 1.1 1.5 3/4 x 1 1/81500 066152U035GJ2 0.180 0.089 1.3 1.7 3/4 x 1 5/81500 066X152U035GE2 0.350 0.178 0.8 1.0 3/4 x 1 1/82200 066222U035HJ2 0.120 0.065 1.7 2.1 7/8 x 1 5/82200 066R222U035GJ2 0.180 0.089 1.9 2.5 3/4 x 1 5/82700 066272U035GP2 0.098 0.05 3.3 4.2 3/4 x 2 5/83300 066332U035HL2 0.085 0.045 2.4 3.0 7/8 x 2 1/83300 066X332U035GJ2 0.180 0.089 1.3 1.7 3/4 x 1 5/83900 066R392U035HJ2 0.120 0.065 2.4 3.0 7/8 x 1 5/84700 066X472U035HJ2 0.120 0.065 1.7 2.1 7/8 x 1 5/84700 066472U035JL2 0.068 0.038 2.8 3.3 1 x 2 1/85600 066562U035JP2 0.053 0.03 3.5 4.1 1 x 2 5/85600 066R562U035HL2 0.085 0.045 3.4 4.2 7/8 x 2 1/86800 066X682U035HL2 0.085 0.045 2.4 3.0 7/8 x 2 1/8


8200 066822U035JS2 0.045 0.025 4.1 4.7 1 x 3 1/88200 066R822U035JL2 0.067 0.037 4.0 4.7 1 x 2 1/8

10000 066R103U035JP2 0.053 0.030 4.9 5.8 1 x 2 5/810000 066X103U035JL2 0.067 0.037 2.8 3.3 1 x 2 1/812000 066R123U035JS2 0.044 0.025 5.8 6.7 1 x 3 1/812000 066X123U035JP2 0.053 0.030 3.5 4.1 1 x 2 5/815000 066R153U035JT2 0.039 0.023 6.5 7.4 1 x 3 5/818000 066X183U035JT2 0.039 0.023 4.6 5.3 1 x 3 5/8


270 066271U050FE2 0.680 0.274 0.54 0.84 5/8 x 1 1/8470 066471U050GE2 0.450 0.185 0.68 1.0 3/4 x 1 1/8560 066561U050FJ2 0.340 0.141 0.91 1.4 5/8 x 1 5/8680 066681U050HE2 0.310 0.133 0.88 1.3 7/8 x 1 1/8680 066R681U050GE2 0.450 0.185 0.96 1.4 3/4 x 1 1/8820 066821U050GJ2 0.230 0.096 1.1 1.7 3/4 x 1 5/8820 066X821U050GE2 0.450 0.185 0.68 1.0 3/4 x 1 1/8

1000 066102U050JE2 0.240 0.104 1.0 1.4 1 x 1 1/81200 066122U050HJ2 0.160 0.067 1.5 2.1 7/8 x 1 5/81200 066R122U050GJ2 0.230 0.096 1.6 2.4 3/4 x 1 5/81500 066152U050FS2 0.140 0.060 2.0 3.0 5/8 x 3 1/81800 066182U050HL2 0.110 0.047 2.1 2.9 7/8 x 2 1/81800 066X182U050GJ2 0.230 0.096 1.1 1.7 3/4 x 1 5/82200 066R222U050HJ2 0.160 0.067 2.1 3.0 7/8 x 1 5/82700 066272U050JL2 0.083 0.039 2.5 3.2 1 x 2 1/82700 066X272U050HJ2 0.160 0.067 1.5 2.1 7/8 x 1 5/83300 066332U050HS2 0.068 0.031 3.1 4.2 7/8 x 3 1/83300 066R332U050HL2 0.110 0.046 3.0 4.1 7/8 x 2 1/83900 066392U050JP2 0.064 0.030 3.1 4.0 1 x 2 5/83900 066R392U050JL2 0.082 0.038 3.5 4.6 1 x 2 1/83900 066X392U050HL2 0.110 0.046 2.1 2.9 7/8 x 2 1/84700 066472U050JS2 0.054 0.026 3.7 4.6 1 x 3 1/85600 066562U050JT2 0.047 0.023 4.2 5.2 1 x 3 5/85600 066R562U050JP2 0.064 0.030 4.4 5.7 1 x 2 5/85600 066X562UOSOJL2 0.082 0.038 2.5 3.3 1 x 2 1/86800 066R682U050JS2 0.053 0.026 5.2 6.6 1 x 3 1/86800 066X682U050JP2 0.064 0.030 3.1 4.0 1 x 2 5/88200 066R822U050JT2 0.047 0.023 5.9 7.4 1 x 3 5/8

10000 066X103U050JS2 0.053 0.026 3.7 4.7 1 x 3 1/812000 066X123U050JT2 0.047 0.023 4.2 5.2 1 x 3 5/8


180 066181U063FE2 0.810 0.281 0.48 0.83 5/8 x 1 1/8270 066271U063GE2 0.530 0.185 0.6 1.0 3/4 x 1 1/8390 066391U063FJ2 0.410 0.141 0.81 1.4 5/8 x 1 5/8470 066R471U063GE2 0.530 0.185 0.86 1.4 3/4 x 1 1/8560 066561U063GJ2 0.270 0.096 1.0 1.7 3/4 x 1 5/8560 066X561U063GE2 0.530 0.185 0.61 1.0 3/4 x 1 1/8680 066681U063JE2 0.280 0.111 0.96 1.4 1 x 1 1/8820 066821U063HJ2 0.180 0.068 1.3 2.1 7/8 x 1 5/8820 066R821U063GJ2 0.270 0.096 1.4 2.4 3/4 x 1 5/8

1000 066102U063FS2 0.170 0.061 1.8 2.9 5/8 x 3 1/81200 066122U063GP2 0.140 0.053 2.6 4.1 3/4 x 2 5/81200 066X122U063GJ2 0.270 0.096 1.0 1.7 3/4 x 1 5/81500 066152U063HL2 0.120 0.047 1.9 2.9 7/8 x 2 1/81500 066R152U063HJ2 0.180 0.067 1.9 2.9 7/8 x 1 5/81800 066182U063JL2 0.095 0.039 2.3 3.2 1 x 2 1/8






CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rs

Ratings



1800 066X182U063HJ2 0.180 0.067 1.3 2.1 7/8 x 1 5/82200 066222U063HS2 0.079 0.031 2.9 4.2 7/8 x 3 1/82200 066R222U063HL2 0.120 0.047 2.7 4.1 7/8 x 2 1/82700 066R272U063JL2 0.095 0.039 3.2 4.6 1 x 2 1/82700 066X272U063HL2 0.120 0.047 1.9 2.9 7/8 x 2 1/82700 066272U063JP2 0.074 0.03 2.9 4.0 1 x 2 5/83300 066332U063JS2 0.061 0.026 3.4 4.6 1 x 3 1/83900 066392U063JT2 0.053 0.024 3.9 5.2 1 x 3 5/83900 066R392U063JP2 0.073 0.03 4.1 5.7 1 x 2 5/83900 066X392U063JL2 0.095 0.039 2.3 3.2 1 x 2 1/84700 066R472U063JS2 0.061 0.026 4.8 6.6 1 x 3 1/85600 066R562U063JT2 0.053 0.024 5.5 7.3 1 x 3 5/85600 066X562U063JP2 0.073 0.030 2.9 4.0 1 x 2 5/86800 066X682U063JS2 0.061 0.026 3.4 4.6 1 x 3 1/88200 066X822U063JT2 0.053 0.024 3.9 5.2 1 x 3 5/8


68 066680U100FE2 1.100 0.296 0.4 0.8 5/8 x 1 1/8120 066121U100GE2 0.710 0.193 0.51 0.97 3/4 x 1 1/8150 066151U100FJ2 0.550 0.148 0.68 1.3 5/8 x 1 5/8180 066181U100HE2 0.480 0.141 0.67 1.2 7/8 x 1 1/8220 066221U100GJ2 0.360 0.096 0.86 1.6 3/4 x 1 5/8220 066R221U100GE2 0.710 0.193 0.72 1.4 3/4 x 1 1/8270 066271U100JE2 0.360 0.111 0.82 1.4 1 x 1 1/8270 066X271U100GE2 0.710 0.193 0.51 0.98 3/4 x 1 1/8390 066391U100HJ2 0.240 0.07 1.1 2.0 7/8 x 1 5/8470 066471U100GP2 0.190 0.055 2.2 4.0 3/4 x 2 5/8470 066R471U100GJ2 0.360 0.096 1.2 2.3 3/4 x 1 5/8560 066561U100HL2 0.160 0.049 1.6 2.8 7/8 x 2 1/8560 066X561U100GJ2 0.360 0.096 0.86 1.6 3/4 x 1 5/8680 066681U100JL2 0.120 0.04 2.0 3.2 1 x 2 1/8680 066R681U100HJ2 0.240 0.07 1.6 2.9 7/8 x 1 5/8820 066821U100HS2 0.100 0.033 2.5 4.1 7/8 x 3 1/8820 066X821U100HJ2 0.240 0.07 1.1 2.0 7/8 x 1 5/8

1000 066102U100JP2 0.095 0.032 2.5 3.9 1 x 2 5/81000 066R102U100HL2 0.160 0.049 2.3 4.0 7/8 x 2 1/81200 066122U100JS2 0.078 0.027 3.0 4.5 1 x 3 1/81200 066X122U100HL2 0.160 0.049 1.6 2.8 7/8 x 2 1/81500 066152U100JT2 0.067 0.024 3.4 5.1 1 x 3 5/81500 066R152U100JL2 0.120 0.04 2.8 4.5 1 x 2 1/81800 066R182U100JP2 0.094 0.031 3.5 5.6 1 x 2 5/81800 066X182U100JL2 0.120 0.04 2.0 3.2 1 x 2 1/82200 066R222U100JS2 0.078 0.027 4.2 6.4 1 x 3 1/82200 066X222U100JP2 0.094 0.031 2.5 3.9 1 x 2 5/82700 066R272U1OOJT2 0.067 0.024 4.9 7.2 1 x 3 5/83300 066X332U100JS2 0.078 0.027 3.0 4.6 1 x 3 1/83900 066X392U100JT2 0.067 0.024 3.4 5.1 1 x 3 5/8


22 066220U200FE2 2.000 0.889 0.3 0.43 5/8 x 1 1/833 066330U200GE2 1.300 0.563 0.39 0.54 3/4 x 1 1/833 066R330U200GE2 1.300 0.563 0.55 0.76 3/4 x 1 1/847 066470U200FJ2 0.990 0.437 0.52 0.72 5/8 x 1 5/856 066560U200HE2 0.840 0.378 0.52 0.71 7/8 x 1 l/856 066R560U200GJ2 0.640 0.281 0.93 1.30 3/4 x 1 5/868 066680U200GJ2 0.640 0.281 0.66 0.91 3/4 x 1 5/882 066820U200JE2 0.620 0.281 0.65 0.87 1 x 1 1 1/8


100 066R101U200HJ2 0.420 0.193 1.2 1.7 7/8 x 1 1/8120 066121U200HJ2 0.420 0.193 0.88 1.2 7/8 x 1 5/8150 066151U200GP2 0.320 0.141 1.7 2.4 3/4 x 2 5/8150 066R151U200HL2 0.280 0.126 1.8 2.4 7/8 x 2 1/8180 066181U200HL2 0.280 0.126 1.3 1.7 7/8 x 2 1/8220 066221U200JL2 0.210 0.096 1.6 2.1 1 x 2 1/8220 066R221U200JL2 0.210 0.096 2.2 2.9 1 x 2 1/8270 066271U200HS2 0.170 0.081 2.0 2.6 7/8 x 3 1/8270 066R271U200JP2 0.160 0.073 2.8 3.7 1 x 2 5/8330 066331U200JP2 0.160 0.073 2.0 2.6 1 x 2 5/8330 066R331U200JS2 0.130 0.061 3.4 4.4 1 x 3 1/8390 066R391U200JT2 0.110 0.052 3.9 5.1 1 x 3 5/8390 066391U200JS2 0.130 0.061 2.4 3.1 1 x 3 1/8470 066471U200JT2 0.110 0.052 2.8 3.6 1 x 3 5/8


22 066220U250FE2 2.200 0.889 0.29 0.42 5/8 x 1 1/822 066R220U250GE2 1.400 0.570 0.52 0.75 3/4 x 1 1/833 066330U250GE2 1.400 0.570 0.36 0.53 3/4 x 1 1/839 066390U250FJ2 1.100 0.444 0.49 0.71 5/8 x 1 5/847 066470U250HE2 0.930 0.385 0.49 0.71 7/8 x 1 1/847 066R470U250GJ2 0.700 0.289 0.87 1.3 3/4 x 1 5/856 066560U250GJ2 0.700 0.289 0.62 0.9 3/4 x 1 5/868 066680U250JE2 0.680 0.281 0.61 0.86 1 x 1 1/868 066R680U250HJ2 0.470 0.193 1.2 1.7 7/8 x 1 5/8

100 066101U250HJ2 0.470 0.193 0.83 1.2 7/8 x 1 5/8120 066121U250GP2 0.360 0.148 1.6 2.3 3/4 x 2 5/8120 066R121U250HL2 0.310 0.133 1.7 2.4 7/8 x 2 1/8150 066151U250HL2 0.310 0.133 1.2 1.7 7/8 x 2 1/8150 066R151U250JL2 0.230 0.096 2.1 2.9 1 x 2 1/8220 066221U250JL2 0.230 0.096 1.5 2.0 1 x 2 1/8220 066R221U250JP2 0.170 0.074 2.7 3.7 1 x 2 5/8270 066271U250JP2 0.170 0.074 1.9 2.6 1 x 2 5/8270 066R271U250JS2 0.140 0.061 3.2 4.4 1 x 3 1/8330 066331U250JS2 0.140 0.061 2.3 3.1 1 x 3 1/8330 066R331U250JT2 0.120 0.053 3.7 5.0 1 x 3 5/8390 066391U250JT2 0.120 0.053 2.6 3.6 1 x 3 5/8


15 066150U300FE2 4.600 2.300 0.21 0.28 5/8 x 1 1/822 066220U300GE2 2.900 1.218 0.27 0.36 3/4 x 1 1/822 066R220U300GE2 2.900 1.118 0.39 0.51 3/4 x 1 1/827 066270U300FJ2 2.300 1.110 0.36 0.48 5/8 x 1 5/839 066390U300HE2 1.900 0.963 0.37 0.48 7/8 x 1 1/839 066R390U300GJ2 1.500 0.733 0.66 0.86 3/4 x 1 5/847 066470U300GJ2 1.500 0.733 0.46 0.61 3/4 x 1 5/856 066R560U300HJ2 0.960 0.481 0.88 1.20 7/8 x 1 5/868 066680U300HJ2 0.960 0.481 0.62 0.82 7/8 x 1 5/8

100 066101U300GP2 0.740 0.370 1.2 1.60 3/4 x 2 5/8100 066R101U300HL2 0.640 0.326 1.3 1.70 7/8 x 2 1/8120 066121U300HL2 0.640 0.326 0.89 1.20 7/8 x 2 1/8120 066R121U300JL2 0.460 0.237 1.6 2.10 1 x 2 1/8150 066151U300JL2 0.460 0.237 1.1 1.50 1 x 2 1/8180 066181U300HS2 0.390 0.200 1.4 1.80 7/8 x 3 1/8180 066R181U300JP2 0.350 0.178 2.0 2.60 1 x 2 5/8220 066221U300JP2 0.350 0.178 1.4 1.90 1 x 2 5/8220 066R221U300JS2 0.280 0.141 2.5 3.20 1 x 3 1/8




CORNELLDUBILIER


Aluminum


Ratings




270 066271U300JS2 0.280 0.141 1.7 2.2 1 x 3 1/8270 066R271U300JT2 0.240 0.119 2.9 3.7 1 x 3 5/8330 066331U300JT2 0.240 0.119 2.1 2.6 1 x 3 5/8


12 066120U350FE2 5.000 2.37 0.20 0.28 5/8 x 1 1/818 066180U350GE2 3.200 1.48 0.26 0.35 3/4 x 1 1/818 066R180U350GE2 3.200 1.48 0.36 0.50 3/4 x 1 1/822 066220U350FJ2 2.500 1.19 0.34 0.47 5/8 x 1 5/827 066270U350HE2 2.100 0.963 0.35 0.47 7/8 x 1 1/833 066330U350GJ2 1.600 0.741 0.44 0.6 3/4 x 1 5/833 066R330U350GJ2 1.600 0.741 0.62 0.84 3/4 x 1 5/839 066390U350JE2 1.500 0.719 0.44 0.59 1 x 1 1/856 066560U350HJ2 1.000 0.496 0.59 0.80 7/8 x 1 5/856 066R560U350HJ2 1.000 0.496 0.83 1.10 7/8 x 1 5/868 066680U350GP2 0.800 0.378 1.10 1.60 3/4 x 2 5/882 066820U350HL2 0.700 0.333 0.84 1.10 7/8 x 2 1/882 066R820U350HL2 0.700 0.333 1.2 1.60 7/8 x 2 1/8

120 066R121U350JL2 0.500 0.244 1.5 2.00 1 x 2 1/8120 066121U350JL2 0.500 0.244 1.1 1.40 1 x 2 1/8150 066151U350JP2 0.380 0.185 1.4 1.80 1 x 2 5/8150 066R151U350JP2 0.380 0.185 1.9 2.60 1 x 2 5/8180 066181U350JS2 0.310 0.148 1.7 2.20 1 x 3 1/8180 066R181U350JS2 0.310 0.148 2.3 3.10 1 x 3 1/8220 066221U350JT2 0.260 0.126 1.9 2.60 1 x 3 5/8220 066R221U350JT2 0.260 0.126 2.7 3.60 1 x 3 5/8


10 066100U400FE2 5.400 2.370 0.19 0.27 5/8 x 1 1/812 066R120U400GE2 3.500 1.560 0.34 0.49 3/4 x 1 1/815 066150U400GE2 3.500 1.560 0.24 0.34 3/4 x 1 1/818 066180U400FJ2 2.700 1.190 0.32 0.46 5/8 x 1 5/822 066220U400HE2 2.300 1.040 0.33 0.46 7/8 x 1 1/827 066270U400GJ2 1.700 0.741 0.41 0.58 3/4 x 1 5/827 066R270U400GJ2 1.700 0.741 0.58 0.83 3/4 x 1 5/833 066330U400JE2 1.600 0.733 0.42 0.58 1 x 1 1/839 066R390U400HJ2 1.100 0.511 0.79 1.10 7/8 x 1 5/847 066470U400HJ2 1.100 0.511 0.56 0.78 7/8 x 1 5/856 066560U4OOGP2 0.870 0.393 1.1 1.5 3/4 x 2 5/856 066R560U400HL2 0.760 0.341 1.1 1.6 7/8 x 2 1/868 066680U400HL2 0.760 0.341 0.8 1.1 7/8 x 2 1/882 066R820U400JL2 0.550 0.244 1.4 2.0 1 x 2 1/8

100 066101U4O0JL2 0.550 0.244 1.0 1.4 1 x 2 1/8100 066R101U400JP2 0.410 0.185 1.8 2.5 1 x 2 5/8120 066121U400JP2 0.410 0.185 1.3 1.8 1 x 2 5/8120 066R121U400JS2 0.330 0.148 2.2 3.1 1 x 3 1/8150 066151U400JS2 0.330 0.148 1.6 2.2 1 x 3 l/8150 066R151U400JT2 0.280 0.126 2.6 3.6 1 x 3 5/8180 066181U400JT2 0.280 0.126 1.8 2.5 1 x 3 5/8


8.2 0668R2U450FE2 6.20 2.740 0.18 0.25 5/8 x 1 1/812 066120U450GE2 4.00 1.780 0.23 0.32 3/4 x 1 1/815 066150U450FJ2 3.10 1.410 0.30 0.43 5/8 x 1 5/818 066180U450HE2 2.60 1.190 0.31 0.44 7/8 x 1 1/827 066270U450GJ2 2.00 0.889 0.39 0.55 3/4 x 1 5/839 066390U450HJ2 1.30 0.585 0.52 0.73 7/8 x 1 5/847 066470U450GP2 1.00 0.444 1.00 1.40 3/4 x 2 5/856 066560U450HL2 0.87 0.393 0.75 1.00 7/8 x 2 1/882 066820U450JL2 0.63 0.281 0.94 1.30 1 x 2 1/8

100 066101U450JP2 0.47 0.215 1.20 1.70 1 x 2 5/8120 066121U450JS2 0.38 0.170 1.50 2.00 1 x 3 1/8150 066151U450JT2 0.32 0.148 1.70 2.40 1 x 3 5/8


2.166

CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rs




Frequency


61-200 Vdc 0.83 1.00 1.15 1.20 1.20 1.20 1.20

201-450 Vdc 0.80 1.00 1.15 1.30 1.30 1.30 1.30

Type WBR, 85 C Industrial Grade, Axial Leaded, Aluminum

85 °C, Industrial GradeType WBR capacitors are the preferred choice for manyvaried industrial applications because they have highcapacitance and extended life characteristics. The ruggedconstruction delivers the high vibration resistancerequired in industrial applications.

SpecificationsOperating Temperature: 450 Vdc, 40 °C to +85 °C


Capacitance Tolerance: 16-50 Vdc 10 + 150%, 75-350 Vdc 10 + 100%, 450 Vdc 10 + 50%Leakage Current: 16-75 Vdc 0.01CV + 10A,150-450 Vdc 0.03CV + 20 A


45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.50 1.46 1.32 1.17 1.00 0.79 0.50

Highlights High Capacitance Extended Life Rugged Construction High Vibration Resistance


Shelf Life: 500 h @ 85 °C, Capacitance 20%,ESR 150% of limit,DCL 200% of limit


Outline Drawings

ripple

lifeMORE

066p 2.160

066p 2.160

057p 2.172cold

Wire Lead Size

D L* d

0.54” 1.5” 0.032” (20 AWG)(or “A” suffix)

>0.54” 2.5” 0.040” (18 AWG)

2.167

CORNELLDUBILIER


Aluminum



Ratings


100 WBR100-16A 5.30 0.057 0.34 0.76250 WBR250-16A 2.10 0.118 0.34 0.88500 WBR500-16A 1.10 0.27 0.40 1.00

1000 WBR1000-16A 0.53 0.42 0.40 1.322000 WBR2000-16A 0.27 0.66 0.79 2.103000 WBR3000-16A 0.18 0.82 0.52 1.834000 WBR4000-16A 0.13 1.00 0.65 1.835000 WBR5000-16A 0.11 1.20 0.65 1.83


10 WBR10-25A 48.00 0.018 0.28 0.5725 WBR25-25A 19.00 0.031 0.28 0.5750 WBR50-25A 9.50 0.044 0.34 0.76

100 WBR100-25A 4.80 0.074 0.34 0.76250 WBR250-25A 1.80 0.155 0.40 1.00500 WBR500-25A 0.95 0.28 0.40 1.32

1000 WBR1000-25A 0.48 0.45 0.47 1.572000 WBR2000-25A 0.23 0.72 0.65 1.83


100 WBR100-35A 4.40 0.086 0.40 0.88150 WBR150-35A 2.95 0.114 0.40 1.00300 WBR300-35A 1.45 0.195 0.47 1.32500 WBR500-35A 0.87 0.285 0.52 1.67

1000 WBR1000-35A 0.44 0.450 0.54 1.672000 WBR2000-35A 0.22 0.91 0.65 1.833000 WBR3000-35A 0.15 1.15 0.74 1.69


1 WBR1-50A 390.00 0.01 0.28 0.572 WBR2-50A 195.00 0.012 0.28 0.575 WBR5-50A 77.00 0.014 0.28 0.57

10 WBR10-50A 39.00 0.02 0.28 0.5725 WBR25-50A 15.50 0.035 0.34 0.7650 WBR50-50A 7.70 0.06 0.40 1.88

100 WBR100-50A 3.90 0.14 0.40 1.00150 WBR150-50A 2.50 0.16 0.40 1.00250 WBR250-50A 1.50 0.22 0.40 1.32500 WBR500-50A 0.77 0.34 0.52 1.57

1000 WBR1000-50A 0.39 0.53 0.65 1.831500 WBR1500-50A 0.25 0.74 0.65 1.83


150 WBR150-75A 2.50 0.18 0.47 1.32275 WBR275-75A 1.30 0.28 0.52 1.57500 WBR500-75A 0.72 0.40 0.65 1.83


4 WBR4-150A 78.00 0.018 0.34 0.885 WBR5-150A 62.00 0.020 0.34 0.888 WBR8-150A 39.00 0.030 0.40 0.88

10 WBR10-150A 31.00 0.034 0.40 0.8816 WBR16-150A 19.50 0.045 0.40 1.0020 WBR20-150A 15.50 0.050 0.40 1.3230 WBR30-150A 10.50 0.085 0.40 1.5740 WBR40-150A 7.80 0.096 0.47 1.3250 WBR50-150A 6.20 0.105 0.47 1.5760 WBR60-150A 5.20 0.13 0.65 1.5780 WBR80-150A 3.90 0.155 0.65 1.83

100 WBR100-150A 3.10 0.19 0.65 1.83150 WBR150-150A 2.05 0.23 0.74 1.69


125 WBR125-180A 2.30 0.30 0.74 1.69


4 WBR4-250A 64.00 0.035 0.40 1.008 WBR8-250A 32.00 0.056 0.40 1.32

12 WBR12-250A 21.50 0.062 0.40 1.3216 WBR16-250A 16.00 0.065 0.47 1.5720 WBR20-250A 12.50 0.075 0.47 1.5730 WBR30-250A 8.40 0.105 0.52 1.5740 WBR40-250A 6.30 0.125 0.52 1.8350 WBR50-250A 5.00 0.14 0.65 1.8360 WBR60-250A 4.20 0.18 0.65 1.8380 WBR80-250A 3.10 0.20 0.74 1.69

350 Vdc (400 Vdc Surge)4 WBR4-350A 51.00 0.036 0.40 1.008 WBR8-350A 26.00 0.050 0.47 1.32

20 WBR20-350A 10.00 0.090 0.52 1.5740 WBR40-350A 5.10 0.135 0.65 1.83




ESR Ripple A Max CaseCap. Catalog Max.Ω @ 85 °C Size (in)F Number 120 Hz 120 Hz D x L

ESR Ripple A Max CaseCap. Catalog Max.Ω @ 85 °C Size (in)F Number 120 Hz 120 Hz D x L

Part Numbering SystemWBR 500 16 A E

Type Capacitance Voltage Lead Epoxy EndsealWBR 500 = 500 F 16 = 16 Vdc A = 1.5” 20 AWG E = epoxy

(blank) = see table (blank) = no epoxy

Type WBR, 85 C Industrial Grade, Axial Leaded, Aluminum




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rsType 557 UHL, 125 °C Military Grade, Axial Leaded, Aluminum

Ultra-High Temperature CapabilityDesigned for data and mobile communications andmilitary applications requiring extra high temperatureand longest life. Type 557 UHL is the equivalent of MIL-C-39018/01 (CU13) with highfrequency vibration capabilities to 15g at 2,000 Hz.


Rated Voltage: 5 to 200 Vdc (7 to 250 Vdc @ 85 °C)Capacitance: 2.2 to 1000 F

Capacitance Tolerance: 5 to 60 Vdc 10 + 75%, 75 to 200 Vdc 10 + 50%Leakage Current:

Ripple Current Multiplier: Ambient Temperature

Frequency


61-200 Vdc 0.83 1.00 1.15 1.20 1.20 1.20 1.20

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.41 1.32 1.22 1.12 1.00 0.87 0.71

Load Life: 2,000 h @ +125 °C, 10,000 h @ +85 °C Capacitance 15%ESR 130% of limitDCL 100% of limit

Shelf Life: 500 h @ +125 °C, Capacitance 10%ESR 115% of limitDCL 200% of limit


Outline Drawings

volts

F

MORE

556p 2.155

556p 2.155

Case Size + 25 C +85/125 C Case Size +25 C +85/125 C3/8 x 15/16 3 A 18 A 3/8 x 2 3/16 7 A 42 A3/8 x 1-1/8 3 A 18 A 3/8 x 2 11/16 10 A 60 A3/8 x 1-3/8 4 A 24 A3/8 x 1-5/8 5 A 32 A Multiply by 2 for 200 & 250 Vdc

Highlights Long life High Temperature High Frequency Vibration Capabilities


CORNELLDUBILIER


Aluminum


Type 557 UHL, 125 °C Military Grade, Axial Leaded, Aluminum

Part Numbering System557UHL 561 U 005 DJ 1 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy Endseal557UHL 6R8 = 6.8 F U = 10% + 75% 005 = 5 Vdc 1 = Polyester E = epoxy

680 = 68 F T = 10% + 50% 060 = 60 Vdc561 = 560 F 100 = 100 Vdc


DC .385 1.015 9.78 25.78 DJ .385 1.828 9.78 46.43

DD .385 1.140 9.78 28.96 DL .385 2.390 9.78 60.71

DE .385 1.328 9.78 33.73 DX .385 2.890 9.78 73.41

DG .385 1.578 9.78 40.08

Case Dimensions


Impedance vs. Frequency - 1000 F @ 5 VdcTemperature Characteristics - 1000 F @ 5 Vdc

Insulated dimensions including sleeve and epoxy




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rsType 557 UHL, 125 °C Military Grade, Axial Leaded, Aluminum


Ratings

5 Vdc (7 Vdc Surge) [85 C; 7 Vdc (10 Vdc Surge)]

220 557UHL221U005DD1E 1 20 0.65 0.29 0.74 3/8 x 15/16270 557UHL271U005DE1E 0.84 17 0.55 0.36 0.87 3/8 x 1 1/8390 557UHL391U005DGlE 0.58 12 0.38 0.52 1.13 3/8 x 1 3/8560 557UHL561U005DJ1E 0.4 8 0.26 0.75 1.46 3/8 x 1 5/8820 557UHL821U005DL1E 0.28 5.5 0.18 1.1 2 3/8 x 2 3/16

1000 557UHL102U005DX1E 0.23 4.5 0.15 1.35 2.38 3/8 x 2 11/16


180 557UHL181U007DD1E 1.3 25 0.85 0.44 0.64 3/8 x 15/16220 557UHL221U007DE1E 1 20 0.65 0.53 0.8 3/8 x 1 1/8330 557UHL331U007DGlE 0.68 14 0.44 0.7 1.05 3/8 x 1 3/8470 557UHL471U007DJ1E 0.48 9.6 0.31 0.89 1.34 3/8 x 1 5/8680 557UHL681U007DL1E 0.33 6.6 0.22 1.21 1.81 3/8 x 2 3/16820 557UHL821U007DX1E 0.28 5.5 0.18 1.5 2.17 3/8 x 2 11/16


150 557UHL151U010DD1E 1.3 30 0.83 0.4 0.65 3/8 x 15/16180 557UHL181U010DE1E 1 25 0.64 0.48 0.81 3/8 x 1 1/8270 557UHL271U010DG1E 0.69 17 0.44 0.63 1.05 3/8 x 1 3/8390 557UHL391U010DJ1E 0.48 12 0.31 0.81 1.34 3/8 x 1 5/8560 557UHL561U010DL1E 0.33 8 0.21 1.1 1.85 3/8 x 2 3/16680 557UHL681U010DX1E 0.27 6.6 0.17 1.32 2.24 3/8 x 2 11/16


82 557UHL820U020DD1E 2.26 36 0.98 0.3 0.6 3/8 x 15/16100 557UHL101U020DE1E 1.86 30 0.8 0.35 0.72 3/8 x 1 1/8120 557UHL121U020DG1E 1.55 25 0.67 0.42 0.85 3/8 x 1 3/8150 557UHL151U020DG1E 1.24 20 0.54 0.47 0.95 3/8 x 1 3/8220 557UHL221U020DJ1E 0.84 14 0.37 0.61 1.23 3/8 x 1 5/8330 557UHL331U020DL1E 0.56 9.1 0.25 0.85 1.7 3/8 x 2 3/16390 557UHL39IU020DX1E 0.48 7.7 0.21 1 2.01 3/8 x 2 11/16


33 557UHL330U040DD1E 2.8 91 1.5 0.19 0.49 3/8 x 15/1647 557UHL470UG40DE1E 2 64 1.1 0.24 0.61 3/8 x 1 1/856 557UHL560U040DG1E 1.7 54 0.94 0.29 0.72 3/8 x 1 3/868 557UHL680U040DG1E 1.4 44 0.77 0.32 0.79 3/8 x 1 3/8

100 557UHL101U040DJ1E 0.93 30 0.51 0.41 1.05 3/8 x 1 5/8150 557UHL151UG40DLlE 0.62 20 0.34 0.57 1.46 3/8 x 2 3/16180 557UHL181U040DXlE 0.5 17 0.29 0.68 1.71 3/8 x 2 11/16


22 557UHL220U060DDE 4.2 140 2.1 0.15 0.41 3/8 x 15/1633 557UHL330U060DE1E 2.8 91 1.4 0.2 0.55 3/8 x 1 1/847 557UHL470U060DG1E 2 64 1 0.26 0.7 3/8 x 1 3/868 557UHL680U060DJ1E 1.4 44 0.7 0.34 0.89 3/8 x 1 5/8

100 557UHL101U060DL1E 0.93 30 0.47 0.51 1.24 3/8 x 2 3/16120 557UHL121U060DX1E 0.77 25 0.39 0.56 1.48 3/8 x 2 11/16


12 557UHL120T075DD1E 7.7 250 3.5 0.11 0.32 3/8 x 15/1615 557UHL150T075DE1E 6.2 200 2.9 0.14 0.38 3/8 x 1 l/822 557UHL220T075DGlE 4.2 140 1.9 0.18 0.51 3/8 x 1 3/833 557UHL330T075DJ1E 2.8 91 1.3 0.24 0.65 3/8 x 1 5/847 557UHL470T075DL1E 2 64 0.92 0.32 0.88 3/8 x 2 3/1668 557UHL680T075DX1E 1.4 44 0.64 0.42 1.15 3/8 x 2 11/16


8.2 557UHL8R2T100DD1E 11.3 360 4.6 0.11 0.28 3/8 x 15/1612 557UHL120T100DE1E 7.7 250 3.2 0.14 0.36 3/8 x 1 1/818 557UHL180T100DG1E 5.2 170 2.1 0.18 0.48 3/8 x 1 3/822 557UHL220T100DJlE 4.2 140 1.7 0.21 0.57 3/8 x 1 5/833 557UHL330T100DL1E 2.8 91 1.2 0.3 0.77 3/8 x 2 3/1656 557UHL560T100DX1E 1.7 54 0.7 0.42 1.1 3/8 x 2 11/16

ESR Z Max Ω Ripple A NominalCap. Catalog Ω 55 °C +25 °C @ 85 °C Size (in)F Number 120 Hz 120 Hz 100 kHz 120 Hz 100 kHz D x L

ESR Z Max Ω Ripple A NominalCap. Catalog Ω 55 °C +25 °C @ 85 °C Size (in)F Number 120 Hz 120 Hz 100 kHz 120 Hz 100 kHz D x L

Impedance vs. Frequency - 180 F @ 40 Vdc Temperature Characteristics - 180 F @ 40 Vdc


CORNELLDUBILIER


Aluminum


Type 557 UHL, 125 °C Military Grade, Axial Leaded, Aluminum

Ratings


5.6 557UHL5R6T150DD1E 16.6 333 6.3 0.09 0.24 3/8 x 15/168.2 557UHL8R2T150DE1E 11.3 250 4.3 0.11 0.31 3/8 x 1 l/812 557UHL120T150DG1E 7.7 154 2.9 0.15 0.41 3/8 x 1 3/815 557UHL150T150DJ1E 6.2 118 2.4 0.18 0.48 3/8 x 1 5/827 557UHL270T150DL1E 3.4 77 1.3 0.27 0.74 3/8 x 2 3/1639 557UHL390T150DX1E 2.4 51 0.9 0.35 0.97 3/8 x 2 11/16


5.6 557UHL5R6T200DD1E 16.6 540 6.3 0.09 0.24 3/8 x 15/166.8 557UHL6R8T200DE1E 13.6 440 5.2 0.1 0.28 3/8 x 1 1/810 557UHL100T200DG1E 9.3 300 3.5 0.13 0.37 3/8 x 1 3/812 557UHL120T200DJ1E 7.7 250 2.9 0.16 0.44 3/8 x 1 5/822 557UHL220T200DL1E 4.2 140 1.6 0.25 0.67 3/8 x 2 3/1627 557UHL270T200DX1E 3.4 110 1.3 0.29 0.81 3/8 x 2 11/16

ESR Z Max Ω Ripple A NominalCap. Catalog Ω 55 C +25 °C @ 85 °C Size (in)F Number 120 Hz 120 Hz 100 kHz 120 Hz 100 kHz D x L




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rsType 057, 105 °C Military Grade, Axial Leaded, Aluminum

Type 057 capacitors are the commercial equivalent toMIL-C-39018/03 (CU17) types and are ideal for highreliability, long life and high temperature applications.

Highlights Long life High Ripple High Temperature


Rated Voltage: 6.3 to 250 VdcCapacitance: 12 F to 33,000 F

Capacitance Tolerance: 10% to 75%Leakage Current: 0.002 CV A @ +25 °C, 0.012 CV A @ +105 °C


Frequency


61-200 Vdc 0.83 1.00 1.15 1.20 1.20 1.20 1.20

45 °C 55 °C 65 °C 75 °C 85 °C 95 °C 105 °C1.62 1.49 1.35 1.19 1.00 0.77 0.43


Shelf Life: 1,000 h @ +105 °C Capacitance 10%ESR 100% of limitDCL 200% of limit

Vibration: 10 to 500 Hz, 0.06” and 10 g max, 2 h in each plane

Outline Drawings

d = 20 AWG for D < 0.75”, 18 AWG for D 0.75”

hot

FMORE

066p 2.160

557 UHLp 2.168


CORNELLDUBILIER


Aluminum


Type 057, 105 °C Military Grade, Axial Leaded, Aluminum

Part Numbering System057 120 U 250 FE 2 E

Type Capacitance Tolerance Voltage Case Code Insulation Epoxy Endseal057 6R8 = 6.8 F U = 10% + 75% 6R3 = 6.3 Vdc See 0 = Bare Can E = epoxy

120 = 12 F T = 10% + 50% 050 = 50 Vdc ratings 1 = Polyester Blank = no epoxy681 = 680 F 250 = 250 Vdc 2 = PVC682 = 6800 F


FE .635 1.250 16.13 31.75 HE .885 1.250 22.48 31.75FJ .635 1.750 16.13 44.45 HJ .885 1.750 22.48 44.45FL .635 2.250 16.13 57.15 HL .885 2.250 22.48 57.15FP .635 2.750 16.13 69.85 HP .885 2.750 22.48 69.85FS .635 3.250 16.13 82.55v HS .885 3.250 22.48 82.55FT .635 3.750 16.13 95.35 HT .885 3.750 22.48 95.25GE .760 1.250 19.30 31.75 JE 1.010 1.250 25.65 31.75GJ .760 1.750 19.30 44.45 JJ 1.010 1.750 25.65 44.45GL .760 2.250 19.30 57.15 JL 1.010 2.250 25.65 44.45GP .760 2.750 19.30 69.85 JP 1.010 2.750 25.65 57.15GS .760 3.250 19.30 82.55 JS 1.010 3.250 25.65 69.85GT .760 3.750 19.30 92.25 JT 1.010 3.75 25.65 82.55

Insulated dimensions Insulated dimensions

Case Dimensions


Temperature Characteristics - 3000 F @ 40 Vdc Temperature Characteristics - 3000 F @ 40 Vdc

Impedance vs. Frequency - 7000 F @ 20 VdcImpedance vs. Frequency - 3000 F @ 40 Vdc




CORNELLDUBILIER


Alum

inum

Axia

l Lea

ded

Capa

cito

rs

Ratings



1500 057152U6R3FE2 0.40 0.153 0.95 1.4 5/8 x 1 1/82200 057222U6R3GE2 0.26 0.107 1.2 1.7 3/4 x 1 1/82700 057272U6R3FJ2 0.20 0.08 1.6 2.3 5/8 x 1 5/83300 057332U6R3HE2 0.18 0.073 1.5 2.1 7/8 x 1 1/84700 057472U6R3FL2 0.13 0.052 2.3 3.2 5/8 x 2 1/84700 057472U6R3GJ2 0.13 0.053 2.0 2.7 3/4 x 1 5/85600 057562U6R3FP2 0.098 0.039 3.0 4.1 5/8 x 2 5/86800 057682U6R3GL2 0.088 0.035 2.9 3.9 3/4 x 2 1/86800 057682U6R3HJ2 0.093 0.039 2.6 3.4 7/8 x 1 5/8

10000 057103U6R3GP2 0.067 0.028 3.7 4.9 3/4 x 2 5/810000 057103U6R3JJ2 0.073 0.033 3.1 3.9 1 x 1 5/812000 057123U6R3GS2 0.055 0.023 4.4 5.7 3/4 x 3 1/812000 057123U6R3HL2 0.062 0.027 3.6 4.7 7/8 x 2 1/815000 057153U6R3HP2 0.048 0.021 4.6 5.8 7/8 x 2 5/815000 057153U6R3JL2 0.049 0.022 4.3 5.3 1 x 2 1/818000 057183U6R3HS2 0.04 0.018 5.5 6.7 7/8 x 3 1/822000 057223U6R3JP2 0.038 0.018 5.4 6.5 1 x 2 5/827000 057273U6R3JS2 0.033 0.015 6.3 7.4 1 x 3 1/833000 057333U6R3JT2 0.029 0.015 7.1 8.2 1 x 3 5/8


1200 057122U7R5FE2 0.41 0.153 0.94 1.4 5/8 x 1 1/81800 057152U7R5GE2 0.27 0.107 1.2 1.7 3/4 x 1 1/82700 057272U7R5FJ2 0.21 0.08 1.6 2.3 5/8 x 1 5/83300 057332U7R5HE2 0.19 0.073 1.5 2.1 7/8 x 1 1/83900 057392U725FL2 0.13 0.052 2.3 3.2 5/8 x 2 1/83900 057392U7RSGJ2 0.14 0.053 2.0 2.7 3/4 x 1 5/85600 057562U7R5FP2 0.10 0.039 2.9 4.1 5/8 x 2 5/85600 057562U7R5HJ2 0.095 0.039 2.5 3.4 7/8 x 1 5/85600 057562U7R8GL2 0.089 0.035 2.8 3.9 3/4 x 2 1/88200 057822U7R5GP2 0.068 0.028 3.6 4.9 3/4 x 2 5/88200 057822U7RSJJ2 0.075 0.033 3.0 3.9 1 x 1 5/8

10000 057103U7R5GS2 0.056 0.023 4.3 5.7 3/4 x 3 1/810000 057103U7R5HL2 0.063 0.027 3.6 4.7 7/8 x 2 1/812000 057123U7R5HP2 0.048 0.021 4.6 5.8 7/8 x 2 5/812000 057123U7R5JL2 0.05 0.022 4.3 5.3 1 x 2 1/818000 057183U7R5HS2 0.041 0.018 5.4 6.7 7/8 x 3 1/818000 057183U7R5JP2 0.039 0.018 5.4 6.5 1 x 2 5/822000 057223U7R5JS2 0.033 0.015 6.2 7.4 1 x 3 1/827000 057273U7R5JT2 0.030 0.015 7.0 8.2 1 x 3 5/8


1000 057102U010FE2 0.41 0.153 0.94 1.4 5/8 x 1 1/81500 057152U010GE2 0.27 0.107 1.2 1.7 3/4 x 1 1/82200 057222U010FJ2 0.21 0.08 1.6 2.3 5/8 x 1 5/82700 057272U010HE2 0.19 0.073 1.5 2.1 7/8 x 1 1/83300 057332U010FL2 0.13 0.052 2.3 3.2 5/8 x 2 1/83300 057332U010GJ2 0.14 0.053 2.0 2.7 3/4 x 1 5/84700 057472U010FP2 0.10 0.039 2.9 4.1 5/8 x 2 5/84700 057472U010GL2 0.089 0.035 2.8 3.9 3/4 x 2 1/84700 057472U010HJ2 0.095 0.039 2.5 3.4 7/8 x 1 5/86800 057682U010GP2 0.068 0.028 3.6 4.9 3/4 x 2 5/86800 057682U010JJ2 0.075 0.033 3.0 3.9 1 x 1 5/88200 057822U010GS2 0.056 0.023 4.3 5.7 3/4 x 3 1/88200 057822U010HL2 0.063 0.027 3.6 4.7 7/8 x 2 1/8

10000 057103U010HP2 0.048 0.021 4.6 5.8 7/8 x 2 5/812000 057123U010JL2 0.05 0.022 4.3 5.3 1 x 2 1/8


15000 057153U010HS2 0.041 0.018 5.4 6.7 7/8 x 3 1/815000 057153U010JP2 0.039 0.018 5.4 6.5 1 x 2 5/818000 057183U010JS2 0.033 0.015 6.2 7.4 1 x 3 1/822000 057223U010JT2 0.030 0.015 7 0 8.2 1 x 3 5/8


820 057821U016FE2 0.41 0.153 0.94 1.4 5/8 x 1 1/81200 057122U016GE2 0.27 0.107 1.2 1.6 3/4 x 1 1/81800 057182U016FJ2 0.21 0.08 1.6 2.3 5/8 x 1 5/82200 057222U016HE2 0.19 0.073 1.5 2.1 7/8 x 1 1/82700 057272U016FL2 0.13 0.052 2.3 3.2 5/8 x 2 1/82700 057272U016GJ2 0.14 0.054 2.0 2.7 3/4 x 1 5/83900 057392U016FP2 0.10 0.04 2.9 4.1 5/8 x 2 5/83900 057392U016GL2 0.089 0.036 2.8 3.9 3/4 x 2 1/83900 057392U016HJ2 0.095 0.039 2.5 3.4 7/8 x 1 5/85600 057562U016GP2 0.068 0.028 3.6 4.8 3/4 x 2 5/85600 057562U016JJ2 0.075 0.033 3.0 3.9 1 x 1 5/86800 057682U016GS2 0.056 0.023 4.3 5.7 3/4 x 3 1/86800 057682U016HL2 0.063 0.027 3.6 4.7 7/8 x 2 1/88200 057822U016HP2 0.048 0.021 4.6 5.8 7/8 x 2 5/88200 057822U016JL2 0.05 0.022 4.3 5.3 1 x 2 1/8

12000 057123U016HS2 0.041 0.018 5.4 6.7 7/8 x 3 1/812000 057123U016JP2 0.039 0.018 5.4 6.5 1 x 2 5/815000 057153U016JS2 0.033 0.016 6.2 7.4 1 x 3 1/818000 057183U016JT2 0.030 0.015 7.0 8.2 1 x 3 5/8


390 057391U025FE2 0.16 0.44 0.9 1.3 5/8 x 1 1/8680 057681U025GE2 0.29 0.107 1.1 1.6 3/4 x 1 1/8820 057821U025FJ2 0.22 0.08 1.5 2.2 5/8 x 1 5/8

1000 057102U025HE2 0.20 0.08 1.5 2.0 7/8 x 1 1/81200 057122U025FL2 0.14 0.053 2.2 3.2 5/8 x 2 1/81200 057122U025GJ2 0.15 0.055 1.9 2.7 3/4 x 1 5/81800 057182U025FP2 0.11 0.041 2.8 4.0 5/8 x 2 5/81800 057182U025GL2 0.095 0.037 2.7 3.8 3/4 x 2 1/81800 057182U025HJ2 0.10 0.040 2.4 3.3 7/8 x 1 5/82700 057272U025GP2 0.072 0.028 3.5 4.8 3/4 x 2 5/82700 057272U025JJ2 0.079 0.033 2.9 3.8 1 x 1 5/83300 057332U025GS2 0.059 0.024 4.2 5.6 3/4 x 3 1/83300 057332U025HL2 0.067 0.027 3.5 4.7 7/8 x 2 1/83900 057392U025HP2 0.051 0.021 4.4 5.8 7/8 x 2 5/83900 057392U025JL2 0.053 0.023 4.1 5.3 1 x 2 1/85600 057562U025JP2 0.041 0.018 5.2 6.5 1 x 2 5/85600 057562U025HS2 0.043 0.019 5.2 6.7 7/8 x 3 1/86800 057682U025JS2 0.035 0.016 6.1 7.4 1 x 3 1/88200 057822U025JT2 0.031 0.015 6.9 8.2 1 x 3 5/8


220 057221U040FE2 0.52 0.167 0.81 1.3 5/8 x 1 1/8390 057391U040GE2 0.34 0.113 1.0 1.6 3/4 x 1 1/8470 057471U040FJ2 0.26 0.087 1.4 2.2 5/8 x 1 5/8560 057561U040HE2 0.23 0.08 1.3 2.0 7/8 x 1 1/8820 057821U040FL2 0.17 0.055 2.0 3.1 5/8 x 2 1/8820 057821U040GJ2 0.17 0.057 1.7 2.6 3/4 x 1 5/8

1000 057102U040FP2 0.13 0.042 2.6 3.9 5/8 x 2 5/81200 057122U040HJ2 0.12 0.041 2.2 3.3 7/8 x 1 5/81200 057122UO40GL2 0.11 0.038 2.5 3.7 3/4 x 2 1/8

ESR Ripple A NominalCap. Catalog Max.Ω @ 85 °C Size (in)F Number 120 Hz 20 kHz 120 Hz 20 kHz D x L



CORNELLDUBILIER


Aluminum


Ratings



1800 057182U040GP2 0.084 0.029 3.2 4.7 3/4 x 2 5/81800 057182U040HL2 0.077 0.028 3.2 4.6 7/8 x 2 1/81800 057182U040JJ2 0.091 0.034 2.7 3.8 1 x 1 5/82200 057222U040GS2 0.069 0.025 3.9 5.5 3/4 x 3 1/82700 057272U040HP2 0.059 0.022 4.1 5.7 7/8 x 2 5/82700 057272U040JL2 0.060 0.023 3.9 5.2 1 x 2 1/83300 057332U040HS2 0.049 0.019 4.9 6.6 7/8 x 3 1/83300 057332U040JP2 0.046 0.019 4.9 6.4 1 x 2 5/84700 057472U040JS2 0.039 0.016 5.7 7.3 1 x 3 1/85600 057562U040JT2 0.034 0.015 6.5 8.1 1 x 3 5/8


220 057221U050FE2 0.62 0.16 0.73 1.3 5/8 x 1 1/8330 057331U050GE2 0.41 0.113 0.91 1.6 3/4 x 1 1/8390 057391U0S0FJ2 0.31 0.08 1.2 2.2 5/8 x 1 5/8470 057471U050HE2 0.28 0.08 1.2 1.9 7/8 x 1 1/8560 057561U050GJ2 0.21 0.057 1.5 2.6 3/4 x 1 5/8680 057681U050FL2 0.20 0.054 1.8 3.1 5/8 x 2 1/8820 057821U050FP2 0.15 0.041 2.3 3.9 5/8 x 2 5/8

1000 057102U050GL2 0.13 0.038 2.2 3.7 3/4 x 2 1/81000 057102U050HJ2 0.14 0.043 2.0 3.1 7/8 x 1 5/81200 057122U050GP2 0.10 0.029 2.9 4.6 3/4 x 2 5/81500 057152U050HL2 0.093 0.029 2.9 4.4 7/8 x 2 1/81500 057152U050JJ2 0.110 0.037 2.4 3.5 1 x 1 5/81800 057182U050GS2 0.081 0.025 3.5 5.4 3/4 x 3 1/82200 057222U050JL2 0.073 0.025 3.4 4.8 1 x 2 1/82200 057222U050HP2 0.071 0.023 3.7 5.5 7/8 x 2 5/82700 057272U050HS2 0.058 0.019 4.4 6.4 7/8 x 3 1/82700 057272U050JP2 0.056 0.020 4.4 6.0 1 x 2 5/83900 057392U050JS2 0.047 0.017 5.2 6.9 1 x 3 1/84700 057472U050JT2 0.041 0.016 5.9 7.7 1 x 3 5/8


47 057470U100FE2 1.30 0.40 0.5 0.8 5/8 x 1 1/882 057820U100GE2 0.85 0.26 0.63 1.0 3/4 X 1 1/8

100 057101U100FJ2 0.66 0.20 0.84 1.3 5/8 X 1 5/8120 057121U100HE2 0.57 0.18 0.84 1.3 7/8 X 1 1/8150 057151U100FL2 0.42 0.127 1.2 2.0 5/8 X 2 1/8150 057151U100GJ2 0.43 0.133 1.1 1.7 3/4 X 1 5/8220 057221U100FP2 0.31 0.093 1.6 2.5 5/8 X 2 5/8270 057271U100GL2 0.28 0.087 1.6 2.4 3/4 X 2 1/8270 057271U100HJ2 0.29 0.093 1.4 2.2 7/8 X 1 5/8330 057331U100GP2 0.20 0.065 2.0 3.1 3/4 X 2 5/8330 057331U100JJ2 0.21 0.073 1.8 2.6 1 X 1 5/8390 057391U100HL2 0.19 0.060 2.1 3.1 7/8 X 2 1/8470 057471U100GS2 0.16 0.053 2.5 3.8 3/4 X 3 1/8560 057561U100HP2 0.14 0.045 2.7 4.0 7/8 X 2 5/8560 057561U100JL2 0.14 0.047 2.5 3.7 1 X 2 1/8680 057681U100HS2 0.11 0.037 3.3 4.7 7/8 x 3 1/8680 057681U100JP2 0.10 0.037 3.3 4.6 1 x 2 5/8

1000 057102U100JS2 0.085 0.030 3.9 5.5 1 x 3 1/81200 057122U100JT2 0.072 0.027 4.6 6.3 1 x 3 5/8


18 05718OU200FE2 4.5 2.270 0.29 0.4 5/8 x 1 1/827 057270U200GE2 2.9 1.470 0.37 0.5 3/4 x 1 1/833 057330U200FJ2 2.2 1.130 0.49 0.6 5/8 x 1 5/839 057390U200HE2 1.9 0.933 0.50 0.6 7/8 x 1 1/8


56 057560U200FL2 1.4 0.733 0.73 0.9 5/8 x 2 1/856 057560U200GJ2 1.4 0.733 0.63 0.8 3/4 x 1 5/868 057680U200FP2 1.0 0.527 0.95 1.1 5/8 x 2 5/882 057820U200GL2 0.91 0.46 0.93 1.1 3/4 x 2 1/882 057820U200HJ2 0.94 0.473 0.85 1.0 7/8 x 1 5/8

120 057121U00GP2 0.67 0.340 1.2 1.5 3/4 x 2 5/8120 057121U200HL2 0.60 0.307 1.2 1.5 7/8 x 2 1/8120 057121U200JJ2 0.68 0.347 1.1 1.3 1 x 1 5/8150 057151U200GS2 0.53 0.273 1.5 1.8 3/4 x 3 1/8180 057181U200HP2 0.44 0.227 1.6 1.9 7/8 x 2 5/8180 057181U200JL2 0.43 0.220 1.6 1.9 1 x 2 1/8220 057221U200HS2 0.35 0.180 2.0 2.4 7/8 x 3 1/8270 057271U200JP2 0.32 0.167 2.0 2.4 1 x 2 5/8330 057331U200JS2 0.26 0.133 2.5 2.9 1 x 3 1/8390 057391U200JT2 0.21 0.107 2.9 3.4 1 x 3 5/8


12 057120U250FE2 5.2 2.33 0.26 0.3 5/8 x 1 1/822 057220U250GE2 3.3 1.53 0.34 0.4 3/4 x 1 1/827 057270U250FJ2 2.6 1.2 0.45 0.6 5/8 x 1 5/833 057330U250HE2 2.2 1.0 0.46 0.6 7/8 x 1 1/839 057390U250FL2 1.7 0.733 0.66 0.9 5/8 x 2 1/839 057390U250GJ2 1.7 0.733 0.57 0.7 3/4 x 1 5/856 057560U250FP2 1.2 0.553 0.86 1.1 5/8 x 2 5/868 057680U250GL2 1.1 0.487 0.84 1.1 3/4 x 2 1/868 057680U250HJ2 1.1 0.50 0.77 1.0 7/8 x 1 5/882 057820U250GP2 0.79 0.353 1.10 1.4 3/4 x 2 5/882 057820U250JJ2 0.79 0.36 0.98 1.2 1 x 1 5/8

100 057101U250HL2 0.70 0.32 1.1 1.4 7/8 x 2 1/8120 057121U250GS2 0.62 0.28 1.4 1.7 3/4 x 3 1/8150 057151U250HP2 0.52 0.233 1.5 1.9 7/8 x 2 5/8150 057151U250JL2 0.51 0.233 1.4 1.8 1 x 2 1/8180 057181U250HS2 0.41 0.187 1.8 2.3 7/8 x 3 1/8180 057181U250JP2 0.37 0.173 1.9 2.3 1 x 2 5/8220 057221U250JS2 0.30 0.14 2.3 2.8 1 x 3 1/8270 057271U250JT2 0.25 0.113 2.7 3.3 1 x 3 5/8






CORNELLDUBILIER


Phot

ofla

shSt

robe

-Fla

shCa

paci

tors

Type 7P Photoflash Capacitors

High Energy, Long-LifeSnapmount or Solder-Lug TerminalsRugged Type 7P capacitors can withstand morethan 100,000 full discharges in typical photoflashapplications—that’s more than ten times the life ofordinary photoflash capacitors. And thanks to special,high-energy anode foil, the Type 7P has industry-leading energy densities of more than 1 joule per cc.

SpecificationsOperating Temperature Range: 20 °C to +55 °C

Rated Voltage: 330 or 360 VdcCapacitance: 300 to 3000 F 10% +20%

Leakage Current: 1 times C in A maximum at 5 min.Dissipation Factor (Tan): 15% max. @ 25 °C & 120 Hz

Discharge Life: 100,000 minimum at 30 s interval Capacitance 10%ESR 150% of limitDCL 150% of limit

Shelf Life: 500 h @ +70 °C Capacitance 10%ESR 150% of limitDCL 150% of limit

Vibration: 10 to 55 Hz; 0.06” and 10 g max, 6 h vertical, 2 h. ea. 2 other planes

Highlights 100,000 flash capability 1 joule per cc energy density

Type 7P, 55 C Photoflash, High-Energy, Long Life, Aluminum

Outline Drawings


CORNELLDUBILIER


Type 7P, 55 C Photoflash, High-Energy, Long Life, Aluminum


7P 122 V 330 N05 2 L

Type Capacitance Tolerance Rated Case Insulation Terminals301 = 300 F 10 + 20% Voltage Code 2 = PVC (blank) = snap-in122 = 1200 F L = solder lugs

Ratings


300 7P301V330J032 0.663 25 0.98 35 1.38300 7P301V330K012 0.663 30 1.18 25 0.98350 7P351V330J042 0.568 25 0.98 40 1.57350 7P351V330K022 0.568 30 1.18 30 1.18400 7P401V330J042 0.497 25 0.98 40 1.57400 7P401V330K022 0.497 30 1.18 30 1.18500 7P501V330J052 0.398 25 0.98 50 1.97500 7P501V330K032 0.398 30 1.18 35 1.38600 7P601V330K042 0.332 30 1.18 40 1.57700 7P701V330A042 0.284 35 1.38 40 1.57800 7P801V330A042 0.249 35 1.38 40 1.57900 7P901V330A052 0.221 35 1.38 50 1.97900 7P901V330A452 0.221 35 1.38 45 1.77

1000 7P102V330A052 0.199 35 1.38 50 1.971000 7P102V330N042 0.199 40 1.57 40 1.571200 7P122V330A052 0.166 35 1.38 50 1.971500 7P152V330A062 0.133 35 1.38 63 2.482000 7P202V330A082 0.099 35 1.38 80 3.152700 7P272V330N082 0.074 40 1.57 80 3.15

ESR Max. ΩCap. Catalog @ +25°C Diameter LengthF Number 120 Hz mm in mm in

Terminal Drawings


300 7P301V360J042 0.663 25 0.98 40 1.57350 7P351V360K022 0.568 30 1.18 30 1.18350 7P351V360A012 0.568 35 1.38 25 0.98400 7P401V360J052 0.497 25 0.98 50 1.97400 7P401V360K032 0.497 30 1.18 35 1.38450 7P451V360K032 0.442 30 1.18 35 1.38450 7P451V360A022 0.442 35 1.38 30 1.18500 7P501V360K042 0.398 30 1.18 40 1.57600 7P601V360A032 0.332 35 1.38 35 1.38700 7P701V360A042 0.284 35 1.38 40 1.57800 7P801V360A452 0.249 35 1.38 45 1.77900 7P901V360N042 0.221 40 1.57 40 1.57

1000 7P102V360A052 0.199 35 1.38 50 1.971200 7P122V360A062 0.166 35 1.38 63 2.481500 7P152V360A072 0.133 35 1.38 70 2.762000 7P202V360N082 0.099 40 1.57 80 3.152500 7P252V360N082 0.080 40 1.57 80 3.15

ESR Max. ΩCap. Catalog @ +25°C Diameter LengthF Number 120 Hz mm in mm in

Snap-In Terminals

Solder-Lug Terminals





CORNELLDUBILIER


Phot

ofla

shSt

robe

-Fla

shCa

paci

tors

High Energy, Long-Life

High Energy, Long-LifeScrew-Terminals Case StyleType PF can withstand more than 100,000 full dis-charges in typical photoflash applications, and TypePF also delivers the higher energy density possiblewith a rated voltage of 500 V and higher capacitancevalues in screw-terminal style cans. Type PF is rightfor the highest flash-energy applications.

SpecificationsOperating Temperature Range: 20 °C to 55 °C

Rated Voltage: 500 VdcCapacitance: 600 to 2100 F 10% +20%

Leakage Current: 1 times C in A maximumDissipation Factor (Tan): 15% max. @ 25 °C & 120 Hz

Discharge Life: 100,000 minimum at 30 s interval Capacitance 10%,ESR 150% of limitDCL 150% of limit

Shelf Life: 500 h @ 55 °C Capacitance 10%ESR 150% of limitDCL 150% of limit

Vibration: 10 to 55 Hz; 0.06” and 10 g max, 6 h vertical, 2 h. ea. 2 other planes

Highlights 100,000 flash capability 1 joule per cc energy density

Outline Drawings

0.50 0.015(12.7 0.78)

D

HTerminal Styles Code (in) (mm) ThreadLow Post A .094 2.39 10-32High Post B .281 7.14 10-32

S

Type PF, 55 C Photoflash, High-Energy, Long Life, 500 V, Aluminum


CORNELLDUBILIER


Type PF, 55 C Photoflash, High-Energy, Long Life, 500 V, Aluminum


Diam. (D) Length (L) Terminals (S) TypicalCase .031 .062 .062 1.57 0.015 0.38 WeightCode Inches mm Inches mm Inches mm oz g

AK 1.399 35.5 1.687 42.8 0.500 12.7 1.9 53.9AA 1.399 35.5 2.187 55.5 0.500 12.7 2.0 56.7AH 1.399 35.5 2.687 68.2 0.500 12.7 2.7 76.5AB 1.399 35.5 3.187 80.9 0.500 12.7 3.3 93.6AJ 1.399 35.5 3.687 93.6 0.500 12.7 3.8 107.7AC 1.399 35.5 4.187 106.3 0.500 12.7 4.4 124.7AD 1.399 35.5 4.687 119.0 0.500 12.7 5.1 144.6AE 1.399 35.5 5.187 131.7 0.500 12.7 5.7 161.6AF 1.399 35.5 5.687 144.4 0.500 12.7 6.4 181.4EA 1.774 45.1 2.187 55.5 0.750 19.1 2.7 76.5EH 1.774 45.1 2.687 68.2 0.750 19.1 3.8 107.7EB 1.774 45.1 3.187 80.9 0.750 19.1 5.1 144.6EJ 1.774 45.1 3.687 93.6 0.750 19.1 6.8 192.8EC 1.774 45.1 4.187 106.3 0.750 19.1 8.1 229.6ED 1.774 45.1 4.687 119.0 0.750 19.1 9.9 280.7EE 1.774 45.1 5.187 131.7 0.750 19.1 9.5 269.3EF 1.774 45.1 5.687 144.4 0.750 19.1 10.5 297.7BA 2.024 51.4 2.187 55.5 0.875 22.2 2.7 76.5BH 2.024 51.4 2.687 68.2 0.875 22.2 5.4 153.1BB 2.024 51.4 3.187 80.9 0.875 22.2 6.1 172.9BJ 2.024 51.4 3.687 93.6 0.875 22.2 6.8 192.8BC 2.024 51.4 4.187 106.3 0.875 22.2 8.2 232.5BD 2.024 51.4 4.687 119.0 0.875 22.2 9.6 272.1BE 2.024 51.4 5.187 131.7 0.875 22.2 10.3 292.0BF 2.024 51.4 5.687 144.4 0.875 22.2 13.0 368.5


PF 212 V 500 BF 2 B

Type Capacitance Tolerance Rated Case Insulation Terminals601 = 600 F 10 + 20% Voltage Code 0 = none A = Low post, 10-32212 = 2100 F Vdc 2 = PVC B = High post, 10-32

Ratings

Case Dimensions


600 PF601V500AJ2B 0.332 35 1.38 92 3.63800 PF801V500AD2B 0.249 35 1.38 117 4.63900 PF901V500EJ2B 0.221 44 1.75 92 3.63

1000 PF102V500AF2B 0.199 35 1.38 143 5.631200 PF122V500BJ2B 0.166 51 2.00 92 3.631300 PF132V500ED2B 0.153 44 1.75 117 4.631600 PF162V500BD2B 0.124 51 2.00 117 4.631700 PF172V500EF2B 0.117 44 1.75 143 5.632100 PF212V500BF2B 0.095 51 2.00 143 5.63

ESR Max. ΩCap. Catalog +25°C Diameter LengthF Number 120 Hz (mm) (in) (mm) (in)





CORNELLDUBILIER


Phot

ofla

shSt

robe

-Fla

shCa

paci

tors

Type ST, 55 C Strobe-Flash, Long-Life, 360 & 450 V, Aluminum

Type ST Strobe-Flash Capacitors

High Energy, Long-LifeRugged Type ST capacitors can withstand more than30 million full discharges in typical strobe-lampapplications—that’s more than ten years’ operation inemergency vehicles. This exceptional life capability isalso available in screw-terminal and other case stylesand other capacitance values.The ST’s magic is its ability to handle the spectrum ofcurrents caused by full discharge at 1 Hz and faster rates.Because discharge energy is at frequencies from less thana hertz to thousands of hertz, power loss and heatingare not predicted by the ESR at 120 Hz, and the open-structure anode foil of Type ST excels at low loss overthe full spectrum.


Rated Voltage: 360 or 450 VdcCapacitance: 30 to 300 F 10% +20%

Leakage Current: 0.01 CV +20 A at 25 °CCold Impedance: 20 °C multiplier of 25 °C Z 2

Dissipation Factor: 7% maximum @ 25 °C & 120 HzDischarge Life: 10 million discharges at 1 s interval, xenon flash tube 0.7 to 1Ω

capacitance 10%, ESR 150% of limit, DCL 150% of limitShelf Life: 500 h @ +55 °C, capacitance 10%

ESR 150% of limit, DCL 150% of limitVibration: 10 to 55 Hz; 0.06” and 10 g max, 6 h vertical, 2 h each, 2 other planes

Highlights Tested to More than 10 Million Flashes More than 30 Million Flashes Typical Life Snapmount or Solder-Lug Terminals

Outline Drawings


CORNELLDUBILIER



Diam. (D) Length (L) Terminal TypicalCase Max. Max. Spacing (S) WeightCode mm Inches mm Inches mm Inches

H04 22 0.87 40 1.57 8.5 0.33 24J01 25 0.98 25 0.98 10.0 0.39 20J02 25 0.98 30 1.18 10.0 0.39 24J03 25 0.98 35 1.38 10.0 0.39 27J04 25 0.98 40 1.57 10.0 0.39 31J05 25 0.98 50 1.97 10.0 0.39 38K03 30 1.18 35 1.38 12.7 0.50 40K04 30 1.18 40 1.57 12.7 0.50 44K05 30 1.18 50 1.97 12.7 0.50 53A05 35 1.38 50 1.97 12.7 0.50 67A06 35 1.38 63 2.48 12.7 0.50 88

Case Dimensions

Terminal Drawings

Snap-In Terminals

Solder-Lug Terminals

S





CORNELLDUBILIER


Phot

ofla

shSt

robe

-Fla

shCa

paci

tors



ST 121 V 360 J05 2 L

Type Capacitance Tolerance Rated Case Insulation Terminals300 = 30 F 10 + 20% Voltage Code 2 = PVC blank = snap-in121 = 120 F L = solder lugs


Ratings


48 ST480V360J012 1.92 25 0.98 25 0.9860 ST600V360J022 1.54 25 0.98 30 1.1880 ST800V360J032 1.15 25 0.98 35 1.38

100 ST101V360J042 0.92 25 0.98 40 1.57120 ST121V360K032 0.77 30 1.18 35 1.38150 ST151V360J052 0.61 25 0.98 50 1.97200 ST201V360K052 0.46 30 1.18 50 1.97250 ST251V360A052 0.37 35 1.38 50 1.97300 ST301V360A062 0.31 35 1.38 63 2.48


30 ST300V450J012 3.07 25 0.98 25 0.9840 ST400V450H042 2.30 22 0.87 40 1.5750 ST500V450J032 1.84 25 0.98 35 1.3860 ST600V450J042 1.54 25 0.98 40 1.5780 ST800V450J052 1.15 25 0.98 50 1.97

100 ST101V450K042 1.08 30 1.18 40 1.57120 ST121V450K052 0.77 30 1.18 50 1.97150 ST151V450A052 0.61 35 1.38 50 1.97

ESR Max. ΩCap. Catalog +25°C Diameter LengthF Number 120 Hz mm in mm in


CORNELLDUBILIER


Application Guide, Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitor Overview

This Application Guide

Except for a few surface-mount technology (SMT) alu-minum electrolytic capacitor types with solid elec-trolyte systems an aluminum electrolytic capacitor con-sists of a wound capacitor element, impregnated withliquid electrolyte, connected to terminals and sealed ina can. The element is comprised of an anode foil,paper separators saturated with electrolyte and a cath-ode foil. The foils are high-purity aluminum and areetched with billions of microscopic tunnels to increasethe surface area in contact with the electrolyte.

While it may appear that the capacitance is betweenthe two foils, actually the capacitance is between theanode foil and the electrolyte. The positive plate is theanode foil; the dielectric is the insulating aluminumoxide on the anode foil; the true negative plate is theconductive, liquid electrolyte, and the cathode foilmerely connects to the electrolyte.

This construction delivers colossal capacitancebecause etching the foils can increase surface areamore than 100 times and the aluminum-oxide dielec-tric is less than a micrometer thick. Thus the resultingcapacitor has very large plate area and the plates areawfully close together.

These capacitors routinely offer capacitance valuesfrom 0.1 µF to 3 F and voltage ratings from 5 V to 500V. They are polar devices, having distinct positive andnegative terminals, and are offered in an enormous

variety of styles which include molded andcan-style SMT devices, axial- and radial-leaded canstyles, snap-in terminals styles and large-can, screw-terminal styles. Representative capacitance-voltagecombinations include

330 µF at 100 V and 6800 µF at 10 V for SMTdevices,

100 µF at 450 V, 6,800 µF at 50 V and 10,000 µFat 10 V for miniature-can styles,

1200 µF at 450 V and 39,000 µF at 50 V for snap-in can styles and

9000 µF at 450 V and 390,000 µF at 50 V forlarge-can, screw-terminal styles.

If two, same-value, aluminum electrolytic capacitorsare connected in series, back-to-back with the positiveterminals or the negative terminals connected, theresulting single capacitor is a non-polar capacitor withhalf the capacitance. The two capacitors rectify theapplied voltage and act as if they had been bypassedby diodes. When voltage is applied, the correct-polar-ity capacitor gets the full voltage. In non-polar alu-minum electrolytic capacitors and motor-start alu-minum electrolytic capacitors a second anode foil sub-stitutes for the cathode foil to achieve a non-polarcapacitor in a single case.

This guide is a full handbook on aluminum electrolyticcapacitors, of course with emphasis on CornellDubilier’s types. It covers construction in depth and dis-closes the latest information on performance and appli-

cation for the major aluminum electrolytic types madeworldwide. We encourage you to tell us what moreyou’d like to know, so we can improve this guide.

Aluminum

ApplicationGuide




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid

eApplication Guide, Aluminum Electrolytic Capacitors

Miniature,Radial-Leaded Type

Snap-in Type

Large-Can, Screw-Terminal Type

These figures show typical constructions of the non-sur-face-mount aluminum electrolytic capacitors. All CornellDubilier capacitors use compression-fit construction sothere is no thermoplastic potting compound to interferewith safety-vent operation. Thermal Pak™ is CornellDubilier’s unique construction for computergrade, screw ter-minal capacitors. Compared to conventional, potted con-struction, Thermal Pak operates cooler, provides longer life,withstands higher shock and vibration, delivers more reli-able safety vent operation and is lighter weight.

EtchingThe anode and cathode foils are made of high purity, thinaluminum foil, 0.02 to 0.1 mm thick. To increase the platearea and the capacitance, the surface area in contact withthe electrolyte is increased by etching the foils to dissolve

aluminum and create a dense network of billions of micro-scopic tunnels penetrating through the foil.

Etching involves pulling the aluminum foil on rollersthrough a chloride solution while applying an AC, DC orAC-and-DC voltage between the etch solution and the alu-minum foil. Surface area can increase as much as 100times for foil in low-voltage capacitors and 20 to 25 timesfor high-voltage capacitors.

FormingThe anode foil carries the capacitor’s dielectric. Thedielectric is a thin layer of aluminum oxide, Al2O3, that ischemically grown on the anode foil during a process called“formation.” Formation is accomplished by pulling theanode foil on rollers through an electrolyte bath and contin-uously applying a DC voltage between the bath and thefoil. The voltage is 135% to 200% of the final capacitor’srated voltage. The thickness of the aluminum oxide isabout 1.4 to 1.5 nm for each volt of the formation voltage,e.g., the anode foil in a 450 V capacitor may get a forma-tion voltage in excess of 600 V and have an oxide thicknessof about 900 nm. That’s less than a hundredth the thick-ness of a human hair.

Formation reduces the effective foil surface area becausethe microscopic tunnels are partially occluded by the oxide.The tunnel etch pattern is adjusted by choice of foil andetching process so that low-voltage anodes have dense tun-nel patterns compatible with thin oxide and high-voltageanodes have coarse tunnel patterns compatible with thickoxide. The cathode foil is not formed and it retains its highsurface area and dense etch pattern.

Slitting Foil is etched and formed in jumbo rolls of 40 to 50 cmwide and then slit into various widths according to thelengths of the final capacitors.

Capacitor Construction

WindingThe capacitor element is wound on a winding machine withspindles for one-to-four separator papers, the anode foil,another set of one-to-four separator papers and the cathodefoil. These are wound into a cylinder and wrapped with astrip of pressure-sensitive tape to prevent unwinding. Theseparators prevent the foils from touching and shorting, andthe separators later hold the reservoir of electrolyte.

Before or during winding aluminum tabs are attached tothe foils for later connection to the capacitor terminals.The best method is by cold-welding of the tabs to the foilswith tab locations microprocessor controlled during wind-ing so that the capacitor element’s inductance can be less

ConventionalConstruction

Cornell DubilierThermal Pak

2.185

CORNELLDUBILIER


Aluminum

ApplicationGuide



Wound Capacitor Elements

Connecting TerminalsIn SMT capacitors and miniature capacitors with rubber-bungs, extensions of the tabs are the capacitor terminals.But in large-can capacitors like snap-ins and screw-terminalstyles, the tabs are riveted or welded on the underside of thecapacitor tops to terminal inserts. Welding produces thelowest contact resistance and highest current handling. Bothresistive welding and ultrasonic welding are used. The upto 12 tab pairs that may be used in large screw-terminalcapacitors often require more mechanical support duringassembly so the tabs in such capacitors may be both rivetedto post extensions on the terminals and then welded. In anaxial-leaded capacitor the cathode tab is welded to the canbefore sealing.

ImpregnationThe capacitor element is impregnated with electrolyte tosaturate the paper separators and penetrate the etch tunnels.The method of impregnation may involve immersion of theelements and application of vacuum-pressure cycles with orwithout heat or, in the case of small units, just simpleabsorption. The electrolyte is a complex blend of ingredi-ents with different formulations according to voltage andoperating temperature range. The principal ingredients are a

solvent and a conductive salt – a solute – to produce electri-cal conduction. Common solvents are ethylene glycol(EG), dimethylformamide (DMF) and gammabutyrolactone(GBL). Common solutes are ammonium borate and otherammonium salts. EG is typically used for capacitors rated–20 °C or –40 °C. DMF and GBL are often used forcapacitors rated –55 °C.

than 2 nH. The older method of attachment is by staking, aprocess of punching the tab through the foil and foldingdown the punched metal. Cold welding reduces short-cir-cuit failures and performs better in high-ripple current anddischarge applications in which the individual stakes mayfail from high current like buttons popping off one at atime from a fat-man’s vest.

Capacitor-Element Materials

Water in the electrolyte plays a big role. It increases con-ductivity thereby reducing the capacitor’s resistance, but itreduces the boiling point so it interferes with high tempera-ture performance, and it reduces shelf life. A few percentof water is necessary because the electrolyte maintains theintegrity of the aluminum oxide dielectric. When leakagecurrent flows, water is broken into hydrogen and oxygenby hydrolysis, and the oxygen is bonded to the anode foilto heal leakage sites by growing more oxide. The hydro-gen escapes by passing through the capacitor’s rubber seal.

SealingThe capacitor element is sealed into a can. While mostcans are aluminum, phenolic cans are often used for motor-start capacitors. In order to release the hydrogen the seal isnot hermetic and it is usually a pressure closure made byrolling the can edge into a rubber gasket, a rubber end-plugor into rubber laminated to a phenolic board. In smallcapacitors molded phenolic resin or polyphenylene sulfidemay replace the rubber. Too tight a seal causes pressurebuild up, and too loose a seal shortens the life by permit-ting drying out, loss of electrolyte.




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


AgingHere the capacitor assembly comes full circle. The lastmanufacturing step is “aging” during which a DC voltagegreater than the rated voltage but less than the formationvoltage is applied to the capacitor. Usually the voltage isapplied at the capacitor’s rated temperature, but other tem-

Comparison to Other Types of Capacitors

Ceramic CapacitorsCeramic capacitors have become the preeminent, general-purpose capacitor, especially in SMT chip devices wheretheir low cost makes them especially attractive. With theemergence of thinner-dielectric, multilayer units with ratedvoltages of less than 10 V capacitance values in the hun-dreds of microfarads have become available. This intrudeson the traditional, high-capacitance province of aluminumelectrolytic capacitors.

Ceramic capacitors are available in three classes accordingto dielectric constant and temperature performance. Class1 (NPO, COG) is suitable for low capacitance, tight toler-ance applications in the range of 1 pF to a few mF. Class 2(X7R) has 20 to 70 times as much capacitance per casesize, but capacitance typically varies about ± 10% over its–55 to 125 °C temperature range. The maximum change is+15 % to –25%. Class 3 (Z5U) with about 5 times thecapacitance of Class 2 has wild swings of capacitance withvoltage and temperature. The temperature range is –25 °Cto 85 °C, and capacitance varies about +20% –65% overthe range. Ceramic chip capacitors are brittle and sensitiveto thermal shock, so precautions need to be taken to avoidcracking during mounting, especially for high-capacitancelarge sizes.

The typical temperature range for aluminum electrolyticcapacitors is –40 °C to 85 °C or 105 °C. Capacitance variesabout +5% –40% over the range with the capacitance lossall at cold temperatures. Capacitors rated –55 °C generallyonly have –10 % to –20 % capacitance loss at –40 °C.Cold temperature performance for rated voltages of 300 Vand higher is often worse, and temperature performancevaries by manufacturer. Thus Class 1 and 2 ceramic capac-itors perform better than aluminum electrolytic capacitorsat cold temperatures, and Class 3 ceramic capacitors per-form worse at all temperatures.

Aluminum electrolytic capacitors readily deliver muchmore capacitance. Aluminum electrolytic capacitors givemore capacitance and energy storage per unit volume thanceramic capacitors for all types except for low-voltage,Class 3 ceramic SMT chip capacitors. While tolerances of±5% and ±10% are routine for ceramic capacitors, ± 20%and –10% +50% are the norms for aluminum electrolytic.

peratures and even room temperature may be used. Thisstep reforms the cut edges and any damaged spots on theanode foil and covers any bare aluminum with aluminumoxide dielectric. Aging acts as burn-in and reduces oreliminates early life failures (infant mortals). Low, initialDC leakage current is a sign of effective aging.

This makes aluminum electrolytics the choice for high-capacitance applications like rectification filters and powerhold up where more capacitance is a bonus.

Ceramic capacitors are not polarized and therefore can beused in AC applications. The low DF and high capacitancestability of Class 1 and 2 are especially suited to AC andRF applications. By comparison, aluminum electrolyticcapacitors are polarized and cannot withstand voltagereversal in excess of 1.5 V. While non-polar aluminumelectrolytics are available for momentary-duty AC applica-tions like motor starting and voltage-reversing applications,the high DF of aluminum electrolytic capacitors – from 2%to 150% – causes excess heating and short life in most ACapplications.

Ceramic capacitors are generally no more reliable than alu-minum electrolytic capacitors because aluminum electrolyt-ics self heal. Since high-capacitance ceramic capacitorsmay develop micro-cracks, aluminum electrolytic capaci-tors are preferred for high capacitance values. However,small sizes of aluminum electrolytic capacitors may havelimited life due to dry out, and so consider reliability inyour choice for applications operating at high temperatures,over 65 °C.

Film CapacitorsFilm capacitors offer tight capacitance tolerances, very lowleakage currents and small capacitance change with temper-ature. They are especially suited to AC applicationsthrough their combination of high capacitance and low DFthat permits high AC currents. However, they have rela-tively large sizes and weights.

The popular polymers used for plastic-film dielectriccapacitors are polyester and polypropylene. The popularpolymer for SMT devices is polyphenylene sulfide (PPS).While film/foil construction is often used for small capaci-tance values – less than 0.01 µF – and for high-currentapplications, metallized-film is usually preferred because itgives smaller size, lower cost and is self healing. Filmcapacitors are general-purpose capacitors for through-holeapplications and have special uses for tight-tolerance, ACvoltage, high voltage and snubbing.


CORNELLDUBILIER


Aluminum

ApplicationGuide

Application Guide, Aluminum Electrolytic CapacitorsPolyester film capacitors operate from is –55 °C to 85 °Cat rated voltage; +85 °C to 125 °C with linear voltage der-ating to 50% rated voltage. The typical capacitance changeover the entire range is less than –5% +15% with ±1%from 0 °C to 50 °C. Capacitance values are readily avail-able up to 10 µF with special large sections to 100 µF.Generally available voltages are 50 to 1000 Vdc and 35 to600 Vac. AC current handling is limited by polyester’s high-temperature DF of about 1%.

Polypropylene film capacitors operate from –55 °C to 85 °Cat rated voltage; 85 °C to 105 °C with linear voltage deratingto 50% rated voltage. The typical capacitance change overthe entire range is less than +2% –4% with ±1% from –20 °Cto 60 °C. Capacitance values are readily available up to 65 µFwith special large sections to 1000 µF. Generally availablevoltages are 100 to 3000 Vdc and 70 to 500 Vac. AC cur-rent handling permits use in motor-run and other continu-ous duty AC applications.

Compared to aluminum electrolytic capacitors, film capaci-tors take the lead in high voltage, AC voltage and tight tol-erance applications. Aluminum electrolytics excel incapacitance and energy storage.

Solid Tantalum CapacitorsLike aluminum electrolytic capacitors solid tantalumcapacitors are polar devices (1 V maximum reverse volt-age), having distinct positive and negative terminals and areoffered in a variety of styles. Case styles include both mold-ed and conformal-coated versions of radial, axial and sur-

face mount configurations. Typical capacitance values arefrom 0.1 µF to 1000 µF in voltage ratings from 2 V to 50 V.Typical maximum capacitance-voltage combinations areapproximately 22 µF at 50 V for leaded styles and 22 µF at35 V for surface mount. Strengths are temperature stabili-ty, volumetric efficiency and compatibility with all auto-mated assembly systems. Weaknesses are the limited volt-age and capacitance ranges and a short-circuit failure modeaccompanied by catching fire.

The operating temperature range is –55 °C to 85 °C atrated voltage; +85 °C to 125 °C with linear voltage derat-ing to 2/3 rated voltage. The typical capacitance changeover the entire range is less than ±5%. Thus aluminumelectrolytic capacitors have a much broader voltage andcapacitance ranges than solid tantalum capacitors but per-form worse at cold temperature.

Solid tantalum capacitors are generally considered morereliable than aluminum electrolytic capacitors because solidtantalum capacitors do not wear out. Their failure ratedecreases with time, while aluminum electrolytic capaci-tors wear out by drying out. As a practical matter, dry-outonly affects the smallest capacitors operating in high-tem-perature environments.

Larger aluminum electrolytics do not dry out in the 10 to20 years expected of most applications, and the open-cir-cuit, dry-out failure is benign compared to solid-tantalum’sshort circuit failure mode.

Characterization

CIRCUIT MODELCapacitance occurs when two electrical conductors are sepa-rated by an insulator. A capacitor is an electronic componentoptimized to deliver capacitance. The capacitance in µF is

C = 8.855(n-1)A/d

Where n is the number of plates or electrodes, is thedielectric constant, A is the plate surface area in cm2 and dis the thickness of the dielectric between the plates in cm.Dielectric constant is the multiplier increase in capacitancethat the dielectric delivers compared to a vacuum. Thedielectric constant for aluminum oxide is about 8.

The circuit at the right models the aluminum electrolyticcapacitor’s normal operation as well as overvoltage andreverse-voltage behavior.

Capacitance C is the equivalent capacitance and it decreas-es with increasing frequency. Common values range from1 µF to 1 F, a six-decade range.

Resistance Rs is the equivalent series resistance, and itdecreases with increasing frequency and temperature. It

Equivalent Circuit

increases with rated voltage. Typical values range from 10 mto 1 , and Rs is inversely proportional to capacitance for agiven rated voltage.

Inductance Ls is the equivalent series inductance, and it isrelatively independent of both frequency and temperature.Typical values range from 10 nH to 30 nH for radial-leadedtypes, 20 to 50 nH for screw-terminal types, and up to 200 nH




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


Parameter Unit Symbol Formula Approximately

Capacitance farads (F) C

Capacitive Reactance ohms () Xc 1/(2πfC) Z

Current amperes (A) I C(dV/dt), Vz/Z

Dissipation Factor none DF Rs/Xc, 2πfCRs, tan(), cot () PF

Energy Joules (J) E 1⁄2CV2

Equivalent Series Resistance ohms () Rs DF/(2πfC)

Frequency hertz (Hz) f

Impedance ohms () Z [Rs2+(Xc2–XL2)]

1⁄2 Xc

Inductance henries (H) Ls

Inductive Reactance ohms () XL 2πfL

Loss Angle degrees (°) tan-1(DF)

Phase Angle degrees (°) cot-1(DF)

Power watts (W) P I2Rs

Power Factor none PF Rs/Z, sin(), cos() DF

Quality Factor none Q Xc/Rs, 1/DF, cot(), tan() 1/PF

Self-Resonant Frequency hertz (Hz) 0 1/[2π(LC)1⁄2]

Voltage volts (V) V Vc=IXc, Vz=IZ

Volt-Amperes V-A VA IVz, I2Z

for axial-leaded types. It increases with terminal spacing.

Resistance Rp is the equivalent parallel resistance andaccounts for leakage current in the capacitor. It decreaseswith increasing capacitance, temperature and voltage, andit increases with time. Typical values are on the order of100/C M with C in µF.

Zener diode D models overvoltage and reverse voltagebehavior. Application of overvoltage on the order of 50 Vbeyond the capacitor’s surge voltage rating causes highleakage current and a constant-voltage operating modequite like the reverse conduction of a zener diode.

Application of reverse voltage much beyond 1.5 V causeshigh leakage current quite like the forward conduction of adiode. Neither of these operating modes can be maintainedfor long because hydrogen gas is produced by the capaci-tor, and the pressure build up will cause failure.

In terms of parameters in the next section, Rated Capacitanceis C, Dissipation Factor is 2πfCRs, Equivalent SeriesResistance is Rs, Impedance is

[(Rs)2 + (1/(2πfC) – 2πfLs)2 ]1⁄2

and Inductance is Ls. The table below expresses these andother parameters in terms of the equivalent-circuit model.

Temperature Range

Operating Temperature Range

The Operating Temperature Range is the temperature rangeover which the part will function, when electrified, withinthe limits given in the specification. It is the range of ambi-ent temperatures for which the capacitor has been designedto operate continuously. Largely the formation voltage setsthe high-temperature limit. Higher formation voltages permithigher operating temperatures but reduce the capacitance.The low-temperature limit is set largely by the cold resis-tivity of the electrolyte. The higher cold resistivity increas-es the capacitor’s ESR 10 to 100 fold and reduces the avail-able capacitance.

Typical temperature ranges are –20 °C to 55 °C, –25 °C to85 °C, –40 °C to 85 °C, –55 °C to 85 °C, –40 °C to 105 °C,–55 °C to 105 °C and –55 °C to 125 °C.

Storage Temperature Range

The Storage Temperature Range is the temperature range towhich the part can be subjected unbiased, and retain confor-mance to specified electrical limits. It is the range of ambi-ent temperatures over which the capacitor may be storedwithout damage for short periods. For long periods of stor-age keep capacitors at cool room temperatures and in anatmosphere free of halogen gases like chlorine and fluorinethat can corrode aluminum.

Parameters


CORNELLDUBILIER


Aluminum

ApplicationGuide


Storage temperature ranges are from –55 °C to the upperlimit of the operating-temperature ranges.

Rated CapacitanceThe rated capacitance is the nominal capacitance and it isspecified at 120 Hz and a temperature of 25 °C. The ratedcapacitance is also the capacitance marked on the unit.

Capacitance TolerancesCapacitance tolerance is the permitted minimum and maxi-mum capacitance values expressed as the percentagedecrease and increase from the rated capacitance, C/C.Typical capacitance tolerances are ±20%, –10% +50%, and–10% +75%.

Tighter tolerances are more readily available in high volt-age capacitors, e.g., above 150 V, but tolerances tighterthan ±10% are generally not available. Note that tightertolerance parts may meet other tolerance requirements andare readily substitutable.

The capacitance varies with temperature and frequency.This variation itself is also dependent on the rated voltageand capacitor size.

Capacitance measurementFor aluminum electrolytic capacitors, capacitance is mea-sured as the capacitance of the equivalent series circuit at25 °C in a measuring bridge supplied by a 120 Hz sourcefree of harmonics with maximum AC signal voltage of 1 V rms and no forward-bias voltage.

Capacitance Temperature characteristicsThe capacitance varies with temperature. This variationitself is dependent to a small extent on the rated voltageand capacitor size. Capacitance increases less than 5%from 25 °C to the high-temperature limit. For devicesrated –40 °C capacitance typically declines 20% at –40 °Cfor low-voltage units and up to 40% for high-voltage units.Most of the decline is between –20 °C and –40 °C. Fordevices rated –55 °C capacitance typically declines lessthan 10% at –40 °C and less than 20% at –55 °C.

Capacitance Frequency characteristicsThe effective capacitance decreases as frequency increases.Self-resonance is typically below 100 kHz depending oncapacitance. At self-resonance the device is resistive andbeyond it is inductive. The termination style (i.e., axial,radial, screw-terminal) will influence the inductive charac-teristics. Small radial-leaded capacitors have inductance ofless than 20 nH. Larger capacitors have more inductanceaccording to terminal spacing.

Dissipation Factor (DF)Dissipation factor is the measurement of the tangent of theloss angle (tan ) expressed as a percentage. It is also theratio of the ESR to the capacitive reactance and is thus

related to ESR by this equation:

DF = 2πfC(ESR)/10,000

Where DF is a unit-less number express in percent, testfrequency f is in Hz, capacitance C is in µF and ESR is in.

DF measurementThe measurement of DF is carried out at +25 °C, 120 Hz,and no voltage bias, with a maximum 1 Vac rms signalvoltage free of harmonics. The value of DF is temperatureand frequency dependent.

DF Temperature characteristicsThe dissipation factor decreases with increasing tempera-ture. DF declines about 50% from 25 °C to the high-tem-perature limit, but increases more than 10 fold at the low-temperature limit. The DF of the better devices rated –55 °Cincrease less than 5 times at –40 °C.

DFlf, defined in the next paragraph, varies little with tem-perature and ESRhf, also in the next paragraph, increases 10to 100 times from 25 °C to the low-temperature limit. Theincrease in DF at cold temperatures is set by the ESRhf.

DF Frequency characteristicsThe dissipation factor varies with frequency at high fre-quencies. DF can be modeled as below:

DF = DFlf + 2πfC(ESRhf)/10,000

Where DF is the total dissipation factor in percent, DFlf isthe low-frequency dissipation factor in percent, ESRhf is thehigh-frequency ESR in , f is the test frequency in Hz andC is the capacitance in µF at the test frequency. DFlf resultsfrom the power lost by the applied electric field in orient-ing the molecules of the aluminum oxide dielectric. ESRhf

results from the resistive losses in the foils, connectionsand the electrolyte/separator pad. The electrolyte/ separa-tor pad resistance usually dominates and its resistance varieslittle with frequency. DFlf ranges from about 1.5% to 3%.ESRhf ranges from 0.002 to 10 and decreases with tem-perature.

The DF equation above shows that DF is constant for lowfrequencies and crosses over to declining-DF, constant-ESR, at a crossover frequency inversely proportional tocapacitance. Since high-capacitance capacitors have lowcrossover frequencies, DF decreases more with increasingfrequency than for lower-capacitance capacitors.

Equivalent Series Resistance (ESR)The equivalent series resistance (ESR) is a single resistancerepresenting all of the ohmic losses of the capacitor and con-nected in series with the capacitance.




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid

e

Impedance versus Frequency

DC Leakage Current (DCL)DC Leakage Current is the DC current flowing through thecapacitor with the rated voltage applied. The value of leak-age current depends on the voltage applied, the chargingperiod and capacitor temperature.

DCL Method of measurement Measure leakage current at 25 °C with the rated voltageapplied through a protective resistance of 1000 in serieswith the capacitor in the measuring circuit. Five minutesafter the application of voltage, the leakage current is not toexceed the maximum value indicated in the specification.

ESR measurementFor aluminum electrolytic capacitors, ESR is measured as theresistance of the equivalent series circuit at 25 °C in a mea-suring bridge supplied by a 120 Hz source free of harmon-ics with maximum AC signal voltage of 1 V rms and noforward-bias voltage.

ESR Temperature characteristics The ESR declines with increasing temperature. ESRdeclines about 35% to 50% from 25 °C to the high-temper-ature limit, but increases more than 10 fold at the low-tem-perature limit. The ESR of devices rated –20 °C or –40 °Ccan increase more than 100 times at –40 °C.

DFlf varies little with temperature and ESRhf increases 10 to100 times from 25 °C to the low-temperature limit. Theincrease in ESR at cold temperatures is set by the ESRhf.

ESR Frequency characteristicsLike DF, the ESR varies with frequency. Rewriting the DFequation above, ESR can be modeled as below:

ESR = 10,000(DFlf)/(2πfC) + ESRhf

Expressing the ideas in ESR terms, at low frequencies theESR declines steadily with increasing frequency and cross-es over to constant ESR at a frequency inversely propor-tional to capacitance. This crossover is typically below 10kHz. The ESR of high-capacitance capacitors changes littlewith increasing frequency because high-capacitance causesthem to have low crossover frequencies. The ESRhf rangesfrom 0.002 for large, screw-terminal capacitors to 10 for miniature devices.

Impedance (Z)For aluminum electrolytic capacitors impedance is actuallyimpedance magnitude. It is the ratio of voltage to currentat a given frequency and is related to the capacitor’s capac-itance, ESR and series inductance as follows:

Z = [(ESR)2 + (1/(2πfC) – 2πfL)2]1⁄2

Where Z is impedance in , ESR is equivalent series resis-tance in , f is frequency in Hz, C is capacitance in F andL is equivalent series inductance in H.

Z measurement For aluminum electrolytic capacitors, Z is measured as theimpedance magnitude of the equivalent series circuit at 25 °Cin a measuring bridge supplied by a variable frequencysource capable of delivering an AC signal voltage of 1 Vrms free of harmonics from 10 Hz to 100 kHz. Impedancemeasurements are mostly for typical performance curves andfor low-temperature limit measurements.

For low-temperature impedance measurement, place thecapacitors in a chamber set to the low-temperature limit ±2 °C.Measure impedance at 120 ±5 Hz using any suitable methodproviding an accuracy of ±21⁄2%. After temperature stabi-lization, make the measurements quickly using as small aspractical an AC measuring voltage in order that it will notcause heating of the capacitors. Assure that the capacitorshave reached thermal stability by demonstrating that two suc-cessive measurements taken at 15 minute intervals show nochange.

Z Temperature characteristics Impedance typically decreases less than 5% from 25 °C tothe high-temperature limit but increases up to 10 times tothe low-temperature limit.

Z Frequency characteristicsThe frequency characteristics of impedance are dictated bythe contributions from capacitive reactance (1/(2πfC)),inductive reactance (2πfL) and from resistive losses in theelectrolyte. A typical impedance-versus-frequency curve isshown below. The low point is at the self-resonant fre-quency, and the impedance is equal to the ESR at that fre-



CORNELLDUBILIER


Aluminum

ApplicationGuide


DC Leakage versus Temperature, 8600 µF 100 V

DC Leakage versus Temperature, 4700 µF 450 V DC Leakage versus Voltage, 4700 µF 450 V

DC Leakage versus Voltage, 8600 µF 100 V

DCL Voltage characteristicsThe leakage current value drops rapidly as the applied volt-age decreases below the capacitor’s rated voltage. Theeffect of voltage derating on the leakage current is shownbelow.

Rated DC voltageRated DC voltage is the voltage marked on the capacitor,and it is the maximum peak voltage including ripple volt-age that may be applied continuously between the termi-nals and over the rated temperature range. Higher ratedvoltage capacitors may be substituted for lower rated volt-age capacitors as long as case size, DF, and ESR ratingsare also compatible.

Rated surge voltageRated surge voltage is the maximum DC overvoltage towhich the capacitor may be subjected at 25 °C for shortperiods not exceeding approximately 30 s at infrequentintervals of not less than 5 min.

Surge voltage measurementSubject the capacitors to their rated surge voltage at normalroom temperature and through a 1000 ±10% resistor(except for capacitances of 2500 µF and up, use a2,500,000/C ±10% resistor where C is the capacitance inµF). Cycle the voltage 1⁄2 minute on followed by 41⁄2 min-utes off during which each capacitor is discharged throughthe charging resistor or equal resistor. Repeat the cyclesfor 120 h. Post test requirements are for DCL, ESR andDF to meet initial requirements and for there to be noevidence of mechanical damage or electrolyte leakage.Electrolyte residue with no droplets or visible flow ispermitted.

Voltage

DCL Temperature characteristicsTypical characteristic curves are shown below:




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


Ripple CurrentRipple current is the AC current flowing in the capacitor.It’s called ripple current because the associated AC voltagerides like ripple on water on the capacitor’s DC bias volt-age. The ripple current heats the capacitor and the maxi-mum permitted ripple current is set by how much can bepermitted and still meet the capacitor’s load life specification.Too much temperature rise will cause the capacitor toexceed its maximum permitted core temperature and failquickly, but operation close to the maximum permitted coretemperature dramatically shortens expected life. The loadlife specifications for aluminum electrolytic capacitors oper-ating at maximum permitted core temperature are typically1000 to 10,000 hours. That’s six weeks to a year and aseventh and not long enough for most applications.

Ripple current specificationRipple current ratings are specified for an expected temper-ature rise at rated temperature. Commonly capacitor typesrated 85 °C permit a temperature rise of 10 °C and have amaximum permitted core temperature of 95 °C. Often typesrated 105 °C permit a temperature rise of 5 °C and have amaximum core temperature of 110 °C. Actual maximum per-mitted core temperatures vary by type and manufacturer.

Ripple current ratings usually assume that the capacitor isconvection cooled and that the entire can is in contact withair. A convection coefficient of 0.006 W/°C/in2 predicts thetemperature rise from air to the case, and the core tempera-ture is assumed to be the same as the case temperature.The power dissipated is the ripple current squared times theESR. Often the 25 °C, 120 Hz maximum ESR is used, butsince ESR decreases at elevated temperatures, less thanmaximum ESR may be used to calculate power dissipated.

Here’s an example. Suppose you wanted the ripple-currentrating for a 4700 µF, 450 V capacitor in a 3 inch (76 mm)diameter and 55/8 inches (143 mm) long can and the maxi-

mum ESR at 25 °C and 120 Hz is 30 m. The can area –not including the terminal end – is 60.1 in2 (388 cm2). Thethermal conductance is (0.006)(60.1) = 0.36 W/°C. For a10 °C temperature rise the case may dissipate 3.6 W. Sothe permitted ripple current with an ESR of 30 m is 11 A.If you assume that the ESR would decrease 35% by 85 °C,then the maximum ripple current can be 13.6 A.

With large-can capacitors like the one in this exampleneglecting the temperature rise from the case to the core canseriously overstate the ripple current capability. With someconstructions the core is 3 to 5 °C per watt of ripple powerhotter than the case. So the total temperature rise would bemore than double the intended 10 °C with rated ripple cur-rent and maximum ESR. It is generally safe to assume thatthe core temperature is the same as the case temperature forcapacitors smaller than 25 mm diameter. For larger caseswith high ripple current, verify the temperature rise byrequesting samples with thermocouples imbedded in thecores.

Cornell Dubilier Thermal Pak, computergrade capacitorshave controlled, low thermal resistance from core to case.You can predict temperature rise using the thermal resis-tance table later in this section or by using the thermal-resis-tance/expected-life model available on the Web site,http://www.cornell-dubilier.com

Ripple current temperature characteristicsRated ripple current can be increased for operating temper-atures less than rated temperature. Multipliers are shownin the specifications. Generally the multipliers are derivedbased on maximum core temperature (Tc), rated tempera-ture (Tr) and ambient temperature (Ta) as

Ripple Temperature Multiplier = [(Tc – Ta)/(Tc – Tr)]1⁄2

Counting on multipliers for temperatures below 60 °C and

Application of overvoltage more than about 50 V beyondthe capacitor’s surge voltage rating causes high leakage cur-rent and a constant-voltage operating mode quite like thereverse conduction of a zener diode. The capacitor may failshort if the electrolyte cannot take the voltage stress, buteven if it can, this operating mode cannot be maintained forlong because hydrogen gas is produced by the capacitor,and the pressure build up will cause failure. However, spe-cial designs are available that use the overvoltage, zener-clamping affect to successfully protect equipment fromovervoltage transients such as lightning strikes.

Reverse voltageAluminum electrolytic capacitors are polarized and must beconnected in the correct polarity. They can withstandreverse voltages up to 1.5 V. Higher reverse voltage cancause failure by pressure build up and rupture of the capac-itor’s safety vent structure. Non-polar and semi-polardevices are available that can withstand reverse voltage.

Transient overvoltageAluminum electrolytic capacitors can generally withstandextreme overvoltage transients of limited energy.

Ripple Current


CORNELLDUBILIER


Aluminum

ApplicationGuide


for more than 11/2 times rated ripple current is risky. Highripple currents can cause shorter operating lives thanexpected because as the capacitor ages its ESR increasesand causes more heating for the same ripple current. Thisaccelerates wearout.

Ripple current frequency characteristicsRated ripple current can be adjusted for operation at frequen-cies other than 120 Hz. Multipliers are shown in the specifi-cations. Generally the multipliers are derived based onexpected ESR change with frequency; however, as discussedabove, ESR is a complex function of temperature, capaci-tance and rated voltage as well as frequency. So it is difficultto create ripple-frequency multiplier tables that accuratelymodel the frequency dependence. For high-ripple currentapplications verify ESR at frequencies of interest and calcu-late total power dissipated.

InductanceInductance is the equivalent series inductance, and it is rel-atively independent of both frequency and temperature.Typical values range from 2 to 8 nH for SMT types, 10 nHto 30 nH for radial-leaded types, 20 to 50 nH for screw-ter-minal types, and up to 200 nH for axial-leaded types.These low values are achieved by tab location and intrinsic,low inductance of the dielectric contact geometry. Thecapacitor element has typical inductance of less than 2 nH.

Low-Temperature ImpedanceLow-temperature impedance is the capacitor’s 120 Hzimpedance measured at the low-temperature limit. It isusually expressed as a multiple of the device’s 25 °Cimpedance.

For low-temperature impedance measurement, place thecapacitors in a chamber set to the low-temperature limit±2 °C. Measure impedance at 120 ±5 Hz using any suitablemethod providing an accuracy of ±21/2%. After temperaturestabilization, make the measurements quickly using assmall as practical an AC measuring voltage in order that itwill not cause heating of the capacitors. Assure that thecapacitors have reached thermal stability by demonstratingthat two successive measurements taken at 15 minute inter-vals show no change.

Self-resonant FrequencyThe self-resonant frequency is the frequency at which thecapacitive reactance (1/(2πfC)) equals the inductive reac-tance (2πfL). Because the capacitive reactance is 180degrees out of phase with the inductive reactance, the tworeactances subtract out, and the remaining impedance ispurely resistive and is equal to the ESR at that frequency.

Above self resonance the device is inductive. In aluminumelectrolytic capacitors the self-resonant frequency typicallyoccurs at less than 100 kHz. The self-resonant frequency isequal to 1/[2π(LC)

1⁄2 ]. It occurs at a frequency higher thanexpected based on 120 Hz capacitance because capacitancedecreases with increasing frequency, and it can decreasewith increasing temperature from capacitance increase.

Dielectric AbsorptionDielectric absorption may be observed as the reappearanceof a voltage across a capacitor after the terminals have beenshorted for a brief period and the short removed. This char-acteristic is important in RC timing circuits, triggering sys-tems and phase shift networks. For aluminum electrolyticcapacitors dielectric absorption will allow up to 10% recov-ery of the charging voltage between 100 s and 1000 s at 25°C, and is more pronounced at higher temperatures.Maximum dielectric absorption can be obtained by charg-ing capacitors for 1 hour at rated voltage and dischargingthrough a dead short for 1 minute. Subsequent measure-ments over time can be made with a high impedancemicrometer.

With high-voltage aluminum electrolytic capacitorsrebound voltages of 40 to 50 V are possible. While suchvoltages are not a safety hazard, they can certainly create afrightening distraction if the terminals are shorted by a toolduring installation. Conductive tape and wire shortingstraps can be supplied for the faint of heart. The tradeoff isextra cost and the labor to remove them.

Insulation and GroundingWith non-solid electrolyte aluminum electrolytic capacitorsthe aluminum cases connect to the negative terminals bycontact with electrolyte. The resulting isolation resistancemay vary from a few ohms to a few thousand ohms. Foraxial-leaded capacitors and flatpacks the case is connectedto the negative lead. If objects contacting the cases are tobe at a potential other than the negative terminals, usecapacitors with insulating sleeves.

The plastic insulation can withstand 3000 Vdc or 2500 Vac,60 Hz for 1 minute applied between the case and a 1⁄4 inchwide metal foil placed around the sleeve. For stud-mount-ing, apply the voltage between the chassis and the case,and mount the capacitor with an approved nylon nut andclearance hole.

Insulation resistance is no less than 100 MΩ after 2 min-utes electrification with 100 volts applied between the foiland the capacitor case.




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


In rare cases for capacitors mounted alone and more oftenfor capacitors in multiple-unit parallel capacitor banks afully functioning pressure relief device may not react intime. This could be from extreme overload or ignition ofgas inside the capacitor through sparking caused by break-down. Protect personnel from possible rupture of high-energy capacitors with shielding, and be sure to use sub-stantial shielding when testing the pressure-relief vent.Examples of appropriate shielding for testing are 1/4-inchthick steel or 1/2-inch thick polycarbonate enclosures withone end open to redirect the explosion rather than containit.

Test the capacitor’s pressure-relief capability by applyingvoltage or current using one of the following three methods.

A. Subject the capacitor to AC current according to therated capacitance as below:

Rated Capacitance Test CurrentµF A rms, 60 Hz

up to 3000 1 to 1003,000 to 20,000 85 to 150above 20,000 100 to 175

B. For a capacitor rated 150 Vdc and above, apply 110 to125 Vac, 60 Hz through a 5 ±10% series, current-limit-ing resistor.

C. Subject the capacitor to reverse polarity, DC voltagesufficient to allow a current from 1 to 10 A to flow.

The excess internal pressure will be relieved without vio-lent expulsion of the capacitor element or cover or ignitionof surrounding material. To demonstrate non-ignition,wrap the case loosely with two layers of cheese clothwhich must not ignite during test. A short or open circuitis not a failure of the test.

Contact with Electrolyte

The electrolyte in non-solid electrolyte capacitors is abiodegradable liquid based on a stable solvent with a highboiling point as the main ingredient. Common solvents areethylene glycol (EG), dimethylformamide (DMF) and gam-mabutyrolactone (GBL). The electrolyte includes an acidbase system and other chemicals. The electrolyte is chemi-cally neutral and contains no PCBs or halogenated com-pounds. It has low toxicity but avoid contact with the skinor eyes and avoid prolonged inhalation. A Material SafetyData Sheet is available upon request.

Immediately treat contact with electrolyte by rinsing exposedarea with water. If electrolyte contacts eyes, flush for 10minutes with running water. Seek medical attention if anysymptoms persist. Avoid inhalation of electrolyte vapors or

External PressureNot relevant for capacitors with solid electrolyte. Aluminumelectrolytic capacitors can operate to 80,000 feet and pres-sures as low as 3 kPa. Maximum air pressure depends onthe size and style of the capacitor. Exceeding the maxi-mum value can damage the capacitor by crushing the case,opening the pressure-relief vent or causing a short circuit.

VibrationAluminum electrolytic capacitors can generally withstand10 g vibration forces. Limits are shown in the specifica-tions. Adjust the procedure below as required by the indi-vidual type specifications.

To test vibration resistance, clamp the capacitors to a vibrat-ing platform and subject them to a simple harmonic motionhaving a maximum peak-to-peak amplitude of 0.06 inchesand a maximum acceleration of 10 g or 15 g as specified.Vary the frequency of vibration linearly between 10 and55 Hz. Traverse the entire frequency range in 1 minute.Unless specified otherwise, vibrate the capacitors for 11/2

hours with the direction of motion being parallel to the axisof the capacitor, then place the capacitors so that the direc-tion of motion is perpendicular to the axis and continuevibration for 11/2 hours. During the last 1/2 hour of test con-nect the capacitor to a bridge and observe for a 3-minuteperiod.

There will be no evidence of loosening of the capacitor ele-ment within the container when shaken by hand followingthe test. Also there will be no indication of intermittentcontact, open or shorting during the 3-minute observationperiod.

Pressure-Relief VentDuring operation of an aluminum electrolytic capacitorwith non-solid electrolyte, gas pressure normally increases.This gas is mostly hydrogen and excess pressure is avoidedby permeation of the gas through the capacitor’s seal. Butin cases like application of overvoltage, reverse voltage, ACvoltage or capacitor failure, excess pressure can cause thecapacitor to explode. To avoid the risk of explosion alu-minum electrolytic capacitors are usually equipped withpressure-relief vent structures. These safety vents areintended to rupture and release the gas pressure. After rup-ture the capacitor has limited life because it loses elec-trolyte and dries out.

Be careful not to interfere with the operation of the vent,for instance by mounting measures such as clamps, glue orpotting compounds. In the case of large capacitors with thecapacitor elements secured by thermoplastic potting, don’tmount them with the safety vents down as the potting mayflow when the capacitors overheat and block the vents.


CORNELLDUBILIER


Aluminum

ApplicationGuide


by overheating, overpressure, and dielectric breakdown. Thiscan result in associated open-circuit or short-circuit failuresand rupture of the capacitor’s pressure-relief vent.

FlammabilityAluminum electrolytic capacitors contain materials whichcan catch fire and support combustion when contacted byflames. Flammable parts include plastic parts, insulatingsleeves, paper, and the electrolytes. Most capacitors willpass the needle-flame test requirements of UL 94V-O andnot support combustion to the requirements of Category Bor C.

In rare cases the capacitor may self-ignite from heavy over-load or capacitor defect. Hydrogen in the capacitor canignite if sparking occurs during capacitor failure. In criticalapplications such as mining applications consider providingfire-resistant shields.

dust particles. If vapors are present, ventilate the room.Smoke from burning electrolyte is irritating but does notcontain dioxins or similar toxic substances. If electrolytegets on clothing, wash it off with water.

Charge-DischargeFrequent, rapid charge and discharge of aluminum electrolyt-ic capacitors not designed for such service can damage thecapacitors by overheating and overpressure or breakdownwith consequent failure by open or short circuit. For charge-discharge applications use capacitors designed for that use,and don’t exceed the manufacturer’s recommended dis-charge rate.

Polarity – Reverse VoltageCheck the polarity of each capacitor both in circuit designand in mounting. Polarity is marked on the capacitor.While the capacitors can withstand continuous application of1.5 V reverse voltage, exceeding that can damage the capacitor

Circuit ConfigurationsPARALLEL

Capacitors may be connected in parallel for increasedcapacitance and ripple-current capability.

Bus StructureWhen connecting capacitors in parallel, design the connect-ing bus with these features in mind. Minimum series induc-tance requires a laminated bus or strip-line structure. Forexample, have one plane of the circuit board as the plusconnection and another plane as the minus connection to allcapacitors. Path resistance to each capacitor should beequal to assure equal current sharing. While ripple currentdivides among the capacitors in proportion to capacitancevalues for low-frequency ripple, high-frequency ripple cur-rent divides in proportion to ESR values and path resistance.

FusingIn order to fuse the individual capacitors, include a slow-start circuit at equipment turn-on, and fuse each capacitorat twice its expected, maximum ripple current. The slow-start circuit can be a resistor in series with the capacitorsthat is shorted after initial charging.

SERIESCapacitors may be connected in series for increased volt-age withstanding.

Voltage SharingDuring charging the voltage on each of the capacitors con-nected in series is proportional to the inverse of the actualcapacitance, but upon reaching final voltage, the voltage oneach capacitor is proportional to the inverse of the capacitor’sleakage current. Of course in a series string all leakage cur-rents are the same, and the capacitors with a propensity forhigher leakage current will get less voltage. Since leakagecurrent increases with applied voltage, less voltage results in

higher leakage resistance, and the voltages tend to equalize.Tests of high voltage bus capacitors in series pairs connect-ed to supply voltages 10% above two-times the rated volt-age showed good voltage sharing over the full temperaturerange, and no capacitor’s voltage was ever higher than itsrated voltage.

When only two capacitors are in series, balancing resistorsare seldom needed for voltage sharing. Before includingthem anyway for voltage bleed-down, consider that notusing balancing resistors often increases system reliabilityby reducing the temperature near the capacitors and byeliminating components less reliable than the capacitors theyare meant to protect. As an alternative, use capacitors fromthe same manufacturing lot to assure equal leakage currentsor use a higher rated voltage to permit voltage imbalancewith different manufacturers. And assure that capacitors inseries have the same thermal environment.

Balancing ResistorsThe difference in leakage currents for two capacitors inseries at rated temperature can be estimated as 0.0015CVbin µA where C is rated capacitance in µF and Vb is thevoltage across the two capacitors in Vdc. Using thisapproximation, select a value of balancing resistance foreach capacitor using this formula:

R = (2Vr – Vb)/(0.0015CVb)

Where R is the balancing resistance in M, Vr is the maxi-mum voltage you want on either capacitor and Vb is themaximum bus voltage across the two capacitors.

For three or more capacitors in series use the followingequation where n is the number of capacitors in series:

R = (Vr – Vb/n)/(0.00075CVb)




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


SERIES/PARALLELCapacitors connected as shown below with multiple seriescombinations in parallel have these considerations. Thisconfiguration is the clear choice when balancing resistorsare not used.

Parallel-series array with common center connection

Series-parallel array, no center connection

PARALLEL/SERIESCapacitors connected as shown below with a common connec-tion between multiple series combinations have these consid-erations.

Advantages: As the number of capacitors in parallelincreases the capacitance at the top tends to equal thecapacitance at the bottom. This improves voltage balanceduring transients. Also the leakage current at the top tendsto equal the leakage current at the bottom, so voltage bal-ance improves during steady-state conditions. Finally, onlytwo balancing resistors need be considered, and the top andbottom may be so well matched as to eliminate the needfor balancing resistors.

Disadvantage: If one capacitor fails short, the other half ofthe bank gets the entire bus voltage, so other capacitors willfail too. Thus one capacitor failure can cause failure of theentire bank unless the shorted capacitor is blown open.

Advantages: If one capacitor fails short then the capacitorin series with it also fails, but other capacitors in the bankare unaffected. If balancing resistors are not used, highleakage current of one capacitor affects only a single pairof capacitors. The independent, series pairs permit fusing.

Disadvantages: With balancing resistors the construction ismore complex; many resistors need to be fitted, and theadditional resistors cost more.

NON-POLAR

If two, same-value, aluminum electrolytic capacitors areconnected in series, back-to-back with the positive termi-nals or the negative terminals connected, the resulting sin-gle capacitor is a non-polar capacitor with half the capaci-tance to either of the original pair. The two capacitors recti-fy the applied voltage and act as if they had been bypassedby diodes. When voltage is applied, the correct-polaritycapacitor gets the full voltage.

In non-polar aluminum electrolytic capacitors and motor-start aluminum electrolytic capacitors a second anode foilsubstitutes for the cathode foil to achieve a non-polarcapacitor in a single case. While non-polar aluminum elec-trolytics are available for momentary-duty AC applicationslike motor starting and voltage-reversing applications, thehigh DF of aluminum electrolytic capacitors – from 2% to150% – causes excess heating and short life in most ACapplications.

MOTOR STARTAluminum electrolytic, motor-start capacitors are non-polarand designed for intermittent operation in starting single-phase induction motors or for other brief AC applicationssuch as motor-run capacitors in electric door openers.


CORNELLDUBILIER


Aluminum

ApplicationGuide


ReliabilityAluminum electrolytic capacitors are quite reliable largelybecause of their effective, self-healing mechanism. Whilewearout is the most common failure mode, most such fail-ures are gradual conversions to open circuits as the unitsbecome more and more resistive.

FAILURE MODES

Early-Life FailuresEarly-life failures, infant mortals, are mostly short-circuitfailures from weaknesses in the aluminum oxide dielectric.Incidence can be reduced with extended aging or burn-in.

Wear-OutWear-out failures are mostly open-circuit failures from lossof electrolyte or ESR increase from other causes. In thecase of large capacitors enduring high levels of ripple cur-rent, the increasing ESR can cause overheating and short-circuit failures as wear-out failures.

Operating LifeOnset of wear-out is determined mainly by the capacitor’ssize and average operating temperature. Operating voltagehas some effect. For capacitors operating at moderate tem-peratures the operating life doubles for each 10 °C thatoperating temperature is reduced. Operating life can beexpressed as

Lop = MvLb2[(Tm - Ta)/10]

Where

Lop is the expected operating life in h,

Mv is a unitless voltage multiplier for voltage derating,

Lb is the expected operating life in h for full ratedvoltage and temperature,

Tm is the maximum permitted internal operatingtemperature in ˚C, and

Ta is the actual capacitor internal operating temper-ture in °C.

Most manufacturers use this model to predict operating life;however, values for Mv, Lb, and Tm vary both by capacitortype and by manufacturer. For case diameters larger than25 mm with significant ripple current, take into account thetemperature rise of the capacitor element over its case.

minimum. Often Tm is 95 ˚C when rated temperature is 85 °Cand is 108 to 110 ˚C when it’s 105 °C.

Mv based on life tests for Cornell Dubilier, capacitor typesis

Mv = 4.3-3.3Va/Vr

where Va is applied voltage and Vr is rated voltage.Types 400C, 401C, 420C, 450C and 4CMC are tightlysealed and behave differently when full rated voltage andtemperature are applied. For these types when both Va/Vr> 0.9 and Ta/Tm > 0.9, the voltage multiplier is

Mv = 4.3 – 3.3Va/Vr – 1000(Ta/Tm – 0.9)1.65

(Va/Vr – 0.9)1.65

Values for expected operating life Lb and maximum per-mitted core temperature Τm are

Type Lb Tm

101C 8000 h 108 °C300/301 6000 h 108 °C

325 3000 h 128 °C330 12000 h 108 °C

380L/LX 5000 h 95°C380LQ 4000 h 95 °C381EL 10000 h 110 °C

381L/LX 5000 h 110 °C381LQ 4000 h 110 °C381LR 5000 h 115 °C400C 7500 h 98 °C401C 8000 h 108 °C420C 12000 h 103 °C450C 15000 h 108 °C

4CMC 5000 h 95 °C500C 7500 h 98 °C520C 12000 h 103 °C550C 15000 h 108 °C

DCMC 5000 h 95 °CMLP up to 250V 12000 h 88 °CMLP 300V & up 5000 h 88 °C

MLS 4000 h 125 °C

Determining Operating Life Determine expected operating life from the capacitor’sexpected operating temperature and voltage using the oper-ating-life formula.

The operating temperature is the expected average ambienttemperature plus temperature rise from ripple current andleakage current. Leakage-current power is small compared

Often Mv is neglected, and values for the other variableschange by case size. Typical values for Lb are 1000 to2000 h for miniature types, 2000 to 10,000 h for snap-intypes and 2000 to 20,000 h for large-can screw terminaltypes. Lb can be greater than the rated load life becauseno ripple is applied and because it’s typical life rather than




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid

eApplication Guide, Aluminum Electrolytic Capacitorsto ripple-current power and can be neglected. Measure tem-perature rise from ripple current using sample capacitorswith thermocouples installed at the core hotspot, or calcu-late temperature rise from dissipated power. If you calcu-late the power, do so at each significant ripple frequencyand add the powers together for total power. Use theThermal Resistance Chart on page 2.178 to determinetemperature rise. It’s equal to power multiplied by thermalresistance.

Calculating power at a frequency other that 120 Hzrequires knowing the ESR at the new frequency. You mayinfer the ESR value from the ripple current frequency mul-tipliers for each type.

ESRf = ESR120/Mf2

Where ESRf = ESR at a frequency f, ESR120 = ESR at 120 Hzand Mf = Frequency multiplier for frequency f.

Or you may calculate the new ESR using the equation inESR Frequency Characteristics. Using that equation tosolve for ESRhf and including 3% for DFlf,

ESRf = ESR120 – 39800(f – 120)/fC

Where ESR is in mΩ, f is in Hz and C is in µF. Although3% is at the high end for DFlf, it fits with ESR120 which is amaximum limit for the ESR at 120 Hz.

Besides knowing ESR at the new frequency you also needto know the ESR at a new temperature, the expected oper-ating temperature. For Cornell Dubilier capacitors withelectrolytes rated to –40 ºC this table shows representativeratios of ESR at elevated temperatures to ESR at 25 ºC.

Rated Capacitor TemperatureVoltage 45 °C 65 °C 85 °C

Vdc Ratio to ESR at 25 °C

Up to 150 82% 77% 77%

200 to 300 75% 70% 70%

350 to 450 70% 60% 60%

500 61% 49% 45%

Here’s an illustration to unify this information. Considerthe earlier example, a 4700 µF, 450 V capacitor in a 3 inch(76 mm) diameter and 55⁄8 inches (143 mm) long can with amaximum ESR at 25 ˚C and 120 Hz of 30 mΩ. Supposethat the capacitor is used as a bus capacitor in a motor-drive inverter, and the ripple current consists of 11 A at360 Hz and 6.5 A at 8000 Hz. And the average appliedvoltage, the bus voltage, is 390 Vdc.

First, calculate the ESRs at the two frequencies. While you

would use one or the other of the methods above to calcu-late ESR, here we’ll use both to illustrate. If the capacitoris a Type DCMC, the frequency multiplier from page 5 for360 Hz is 1.13. Thus the 360 Hz ESR is 30/1.132 or 23.5 mΩ.Or using the ESR Frequency Characteristics equation,the 360 Hz ESR is [30–39800(360-120)/360/4700] or24.4 mΩ. Similarly at 8000 Hz the ESRs calculate to be19.5 and 21.6 mΩ.

Next calculate the total power. At 360 Hz it’s (112)(0.0244)or 2.9 W. At 8000 Hz it’s (6.52)(0.0216) or 0.9 W. That’s atotal power of 3.8 W.

Then calculate the core hot-spot temperature. From theThermal Resistance Chart the thermal resistance for freeconvection cooling is 3.07 ˚C/W. So the temperature rise is(3.8)(3.07) or 14 ˚C. If the ambient temperature were50 ˚C, the core temperature would be 64 ˚C.

Now predict operating life capability using the OperatingLife equation. The voltage multiplier, Mv is[4.3–3.3(390/450)] or 1.44. Operating life is

Lop = (1.44)(5000)2[(95 – 64)/10]

= 61,700 h

But if the core temperature is 64 ˚C, the ESR would havedecreased about 40%. The new total power would be0.6(3.8) or 2.3 W. The new temperature rise would be(3.07) (2.3) or 7 ˚C, and the core temperature would be57 ˚C. Recalculating operating life with the lower coretemperature gives

Lop = (1.44)(5000)2[(95 – 59)/10]

= 100,300 h

And actual ESRs are typical 70% of limit so you couldargue that the total power is 1.6 W. Thus the temperaturerise would be 5˚C, the core temperature, 55 ˚C, and theoperating life, 115,000 h. However, it is more accurate touse the maximum limit because that takes into account theESR increase over life.

The above example shows the iterative approach. If a high-er core temperature gives the operating life you require,you are done.

If all of the math needed to calculate operating life seemsburdensome, take cheer. You can shortcut the calculationsand consider more mounting and cooling options by visit-ing our Web site, http://cornell-dubilier.com. There youwill find Java applets that calculate core temperature andexpected life for computergrade screw-terminal capacitors,for snap-in capacitors and for plug-in capacitors. Plug-incapacitor types start with the number 4, like Type 4CMC.


CORNELLDUBILIER


Aluminum

ApplicationGuide


Cooling

Transient over-temperature As said, life of aluminum electrolytic capacitors generallydoubles for each 10 °C that the core temperature isreduced. The core is the hottest spot at about the center ofthe capacitor. However, as a capacitor heats up toward itsmaximum permitted core temperature, the rules change. Attemperatures above the maximum core temperature and by125 °C for most types the electrolyte can be driven fromcapacitor element and the ESR can increase as much as 10times. By this mechanism transient over-temperature orover-current can permanently increase the ESR and makethe capacitor unusable. Be alert to this possibility in high-temperature and high-ripple applications, and pay extraattention to system cooling.

Load Life TestPlace the capacitors in a circulating air oven set to theupper temperature limit, 85 °C, 105°C or 125 °C, ± 3 °C. Apply a DC voltage and an AC ripple voltage. Adjust theAC voltage to cause current equal to the rated ripple cur-rent to flow and adjust the DC voltage such that the peakvoltage equals the capacitors’ rated voltage. Apply thevoltage for the rated load-life period –0 +6 h. Upon com-pletion allow the capacitors to stabilize at 25 °C for 24 h ormore. The capacitors will meet the specified post-test lim-its for capacitance, ESR and DCL.

EIA Ripple Life Test, EIA IS-479Conduct the wear-out lifetime test per EIA InterimStandard 479. The highlights of that test are as follows:Apply ripple current at 120 Hz or adjust to maintain thesame power dissipation if performed at another frequency.Set DC bias voltage equal to rated voltage minus peakapplied AC voltage. Set ambient temperature to 85 ± 2 °C

with airflow less than 0.5 m/s. Periodic test interval ≤ 1000 h.Sample size is 10 or more. Mount capacitors horizontallyand spaced 25 mm or more. Choose any temperature ≤85 ˚Cfor measurements, and make all measurements at that tem-perature. End of lifetime is ≤ the time when 10% or moreof the sample have

capacitance < 80% initial value or ESR > 200% initial requirement or DCL > initial value or evidence mechanical damage or leakage of electrolyte.

10% of sample may fail short or open and not be counted.

Voltage DeratingVoltage derating is expressed as the percentage that theapplied voltage is less than rated voltage, e.g., a 450 V capac-itor operating at 400 V would have 11% voltage derating.

Aluminum electrolytic capacitors made with formation volt-ages at least 35% higher than rated voltage and with rated tem-peratures of 85 °C or higher, don’t require much voltagederating. In applications operating at less than 45 °C noderating is needed, and with up to 75 °C, 10% is sufficient.For higher temperatures and with high ripple current, 15%or 20% is appropriate. Since operating life continues toincrease for further derating, military and space applica-tions use 50% voltage derating.

Photoflash capacitors may be used at full rated voltage atnormal room temperatures because they are designed forsuch duty. Strobe capacitors benefit from at least 10%voltage derating because their continuous operation makesthem run hot.

Cooling StrategiesCornell Dubilier computergrade capacitors conduct heatfrom the core to the bottom much more effectively than outthe sides. You can take advantage of this heat path bymounting the capacitors directly to metal chassis. In manycase sizes this can double the permitted ripple current forthe same temperature rise.

Mounting can be by using capacitors with mounting studsand screwing the capacitors directly to the plate or it can beby pressing the capacitors against a plate using the inter-connecting bus structure. Cornell Dubilier furnishes silpadinserts at the bottom of the capacitors for this application.The silpads create smooth bottoms by eliminating the stepsat the sleeve rollovers. The thermal resistance between thecan and the underlying plate for capacitors merely sittingon the plate is about 2.5 °C/W. This decreases to less than1 °C/W if the capacitors are pressed in place.

An Operating Life and Temperature Calculator is availableon the Cornell Dubilier Web site which permits you toexplore cooling options and directly see the affect on oper-ating life. Go to http://www.cornell-dubilier.com.

Thermal ResistanceIn large-can capacitors, especially ones with potting, thereis significant temperature rise from the case to the core, thehottest spot at the center of the capacitor. For CornellDubilier Thermal Pak computergrade capacitors use the fol-lowing thermal resistance data to determine temperature risefrom power dissipated. As an illustration, consider 20 ampsof ripple current at 120 Hz in a 3 x 55/8 case with a maxi-mum ESR of 20 m. The hot, typical ESR would beabout half that or 10 m, and the power dissipated wouldbe I2Rs, 202x0.01 or 4 W.




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


Free Convection 200 lfm Airflow 500 lfm Airflow 1000 lfm AirflowAir on Side & End Air & Metal Chassis Air on Side & End Air & Metal Chassis Air on Side & End Air & Metal Chassis Air on Side & End Air & Metal Chassis

Case Code

Case SizeD x L (in)

Core to bottom

Case to air

Total Core to bottom

Case to air


Case to air


Case to air


Case to air


Case to air


Case to air


Case to air

Total

AK 1 3/8 X 1 5/8 1.67 17.12 18.78 1.68 3.29 4.97 1.66 12.19 13.86 1.68 3.08 4.76 1.66 7.83 9.49 1.68 2.75 4.43 1.66 5.62 7.29 1.68 2.46 4.14AA 1 3/8 X 2 1/8 1.70 13.72 15.42 1.74 3.13 4.87 1.70 9.80 11.50 1.74 2.90 4.64 1.70 6.31 8.02 1.73 2.53 4.26 1.70 4.56 6.26 1.73 2.22 3.95AH 1 3/8 X 2 5/8 1.72 11.49 13.21 1.78 2.99 4.77 1.72 8.23 9.94 1.77 2.73 4.51 1.72 5.33 7.05 1.76 2.35 4.11 1.72 3.87 5.59 1.76 2.04 3.79AB 1 3/8 X 3 1/8 1.72 9.91 11.63 1.80 2.86 4.66 1.71 7.12 8.83 1.79 2.59 4.38 1.71 4.64 6.35 1.78 2.19 3.97 1.71 3.39 5.11 1.77 1.88 3.65AJ 1 3/8 X 3 5/8 1.69 8.73 10.43 1.81 2.74 4.55 1.69 6.29 7.99 1.80 2.46 4.25 1.69 4.13 5.82 1.78 2.05 3.83 1.69 3.04 4.73 1.76 1.75 3.52AC 1 3/8 X 4 1/8 1.66 7.82 9.48 1.81 2.63 4.44 1.66 5.65 7.32 1.79 2.33 4.13 1.66 3.73 5.39 1.77 1.93 3.70 1.66 2.76 4.42 1.75 1.64 3.39AD 1 3/8 X 4 5/8 1.62 7.09 8.71 1.80 2.52 4.32 1.62 5.14 6.76 1.78 2.22 4.00 1.62 3.41 5.03 1.75 1.82 3.57 1.62 2.54 4.16 1.72 1.54 3.27AE 1 3/8 X 5 1/8 1.58 6.49 8.07 1.79 2.42 4.21 1.58 4.72 6.30 1.76 2.12 3.88 1.58 3.15 4.73 1.72 1.73 3.45 1.58 2.36 3.93 1.70 1.46 3.15AF 1 3/8 X 5 5/8 1.53 5.99 7.52 1.77 2.33 4.10 1.53 4.37 5.90 1.74 2.02 3.76 1.53 2.93 4.46 1.69 1.64 3.33 1.53 2.20 3.73 1.66 1.38 3.04

EA 1 3/4 X 2 1/8 1.03 10.40 11.43 1.05 1.90 2.96 1.03 7.43 8.46 1.05 1.79 2.84 1.03 4.79 5.83 1.05 1.61 2.66 1.03 3.46 4.50 1.05 1.45 2.49EH 1 3/4 X 2 5/8 1.06 8.77 9.83 1.09 1.84 2.93 1.06 6.28 7.34 1.09 1.71 2.80 1.06 4.08 5.14 1.09 1.51 2.60 1.06 2.97 4.03 1.08 1.35 2.43EB 1 3/4 X 3 1/8 1.08 7.61 8.68 1.13 1.77 2.90 1.08 5.47 6.55 1.12 1.64 2.76 1.08 3.57 4.65 1.12 1.43 2.55 1.08 2.62 3.69 1.11 1.26 2.37EJ 1 3/4 X 3 5/8 1.08 6.73 7.82 1.15 1.72 2.87 1.08 4.86 5.94 1.15 1.57 2.72 1.08 3.20 4.28 1.14 1.36 2.50 1.08 2.36 3.44 1.13 1.19 2.32EC 1 3/4 X 4 1/8 1.08 6.06 7.13 1.17 1.66 2.83 1.08 4.39 5.47 1.16 1.51 2.67 1.08 2.91 3.99 1.15 1.29 2.44 1.08 2.16 3.24 1.14 1.13 2.27ED 1 3/4 X 4 5/8 1.07 5.51 6.58 1.19 1.61 2.79 1.07 4.01 5.08 1.17 1.45 2.62 1.07 2.67 3.74 1.16 1.23 2.39 1.07 2.00 3.07 1.14 1.07 2.21EE 1 3/4 X 5 1/8 1.05 5.07 6.12 1.19 1.55 2.75 1.05 3.70 4.75 1.18 1.39 2.57 1.05 2.48 3.54 1.16 1.18 2.33 1.05 1.87 2.92 1.14 1.02 2.16EF 1 3/4 X 5 5/8 1.03 4.69 5.72 1.20 1.50 2.70 1.03 3.43 4.47 1.18 1.34 2.52 1.03 2.32 3.35 1.15 1.13 2.28 1.03 1.76 2.79 1.13 0.97 2.11

BA 2 X 2 1/8 0.78 8.89 9.67 0.80 1.45 2.24 0.78 6.35 7.14 0.80 1.37 2.17 0.78 4.10 4.88 0.79 1.25 2.04 0.78 2.97 3.75 0.79 1.14 1.93BH 2 X 2 5/8 0.81 7.53 8.34 0.84 1.40 2.24 0.81 5.40 6.21 0.83 1.32 2.15 0.81 3.50 4.32 0.83 1.18 2.01 0.81 2.55 3.36 0.83 1.07 1.89BB 2 X 3 1/8 0.83 6.55 7.38 0.87 1.36 2.23 0.83 4.71 5.54 0.87 1.27 2.13 0.83 3.08 3.91 0.86 1.13 1.99 0.83 2.26 3.09 0.86 1.01 1.86BJ 2 X 3 5/8 0.84 5.82 6.66 0.90 1.32 2.22 0.84 4.20 5.04 0.89 1.22 2.11 0.84 2.77 3.61 0.88 1.07 1.96 0.84 2.05 2.89 0.88 0.95 1.83BC 2 X 4 1/8 0.85 5.24 6.09 0.92 1.28 2.20 0.85 3.80 4.65 0.91 1.18 2.09 0.85 2.52 3.37 0.90 1.03 1.93 0.85 1.88 2.73 0.89 0.91 1.80BD 2 X 4 5/8 0.84 4.78 5.63 0.93 1.25 2.18 0.84 3.48 4.33 0.93 1.14 2.07 0.84 2.33 3.17 0.91 0.99 1.90 0.84 1.75 2.59 0.90 0.87 1.77BE 2 X 5 1/8 0.84 4.40 5.24 0.95 1.21 2.16 0.84 3.22 4.06 0.94 1.10 2.04 0.84 2.17 3.01 0.92 0.95 1.87 0.84 1.64 2.48 0.91 0.83 1.74BF 2 X 5 5/8 0.83 4.09 4.92 0.96 1.18 2.14 0.83 3.00 3.83 0.94 1.06 2.01 0.83 2.03 2.86 0.93 0.91 1.84 0.83 1.55 2.38 0.91 0.80 1.71

CH 2 1/2 X 2 5/8 0.52 5.80 6.32 0.53 0.89 1.42 0.52 4.16 4.68 0.53 0.85 1.38 0.52 2.70 3.22 0.53 0.78 1.31 0.52 1.97 2.49 0.53 0.71 1.24CB 2 1/2 X 3 1/8 0.54 5.07 5.61 0.56 0.87 1.43 0.54 3.65 4.19 0.56 0.82 1.38 0.54 2.39 2.93 0.55 0.75 1.30 0.54 1.76 2.29 0.55 0.68 1.23CJ 2 1/2 X 3 5/8 0.55 4.53 5.08 0.58 0.85 1.43 0.55 3.27 3.82 0.58 0.80 1.38 0.55 2.16 2.71 0.58 0.72 1.30 0.55 1.60 2.15 0.57 0.65 1.23CC 2 1/2 X 4 1/8 0.56 4.10 4.66 0.60 0.83 1.43 0.56 2.98 3.54 0.60 0.78 1.38 0.56 1.98 2.54 0.59 0.70 1.29 0.56 1.48 2.04 0.59 0.63 1.22CD 2 1/2 X 4 5/8 0.57 3.47 4.04 0.64 0.79 1.43 0.57 2.55 3.11 0.63 0.74 1.37 0.57 1.72 2.29 0.62 0.65 1.27 0.57 1.31 1.88 0.62 0.58 1.20CD 2 1/2 X 5 1/8 0.57 3.47 4.04 0.64 0.79 1.43 0.57 2.55 3.11 0.63 0.74 1.37 0.57 1.72 2.29 0.62 0.65 1.27 0.57 1.31 1.88 0.62 0.58 1.20CF 2 1/2 X 5 5/8 0.57 3.23 3.80 0.65 0.78 1.43 0.57 2.38 2.95 0.64 0.72 1.36 0.57 1.62 2.19 0.63 0.63 1.26 0.57 1.24 1.81 0.62 0.56 1.19

DB 3 X 3 1/8 0.37 4.10 4.47 0.39 0.61 0.99 0.37 2.95 3.33 0.39 0.58 0.97 0.37 1.94 2.31 0.39 0.53 0.92 0.37 1.42 1.80 0.38 0.49 0.88DJ 3 X 3 5/8 0.39 3.67 4.06 0.41 0.59 1.00 0.39 2.66 3.04 0.41 0.56 0.97 0.39 1.76 2.14 0.40 0.52 0.92 0.39 1.30 1.69 0.40 0.47 0.88DC 3 X 4 1/8 0.40 3.34 3.73 0.43 0.58 1.01 0.40 2.43 2.82 0.42 0.55 0.97 0.40 1.62 2.02 0.42 0.50 0.92 0.40 1.21 1.61 0.42 0.46 0.88DC 3 X 4 5/8 0.40 3.34 3.73 0.43 0.58 1.01 0.40 2.43 2.82 0.42 0.55 0.97 0.40 1.62 2.02 0.42 0.50 0.92 0.40 1.21 1.61 0.42 0.46 0.88DE 3 X 5 1/8 0.41 2.85 3.26 0.46 0.56 1.02 0.41 2.09 2.50 0.45 0.53 0.98 0.41 1.42 1.83 0.45 0.47 0.92 0.41 1.08 1.49 0.44 0.43 0.88DF 3 X 5 5/8 0.41 2.66 3.07 0.47 0.55 1.02 0.41 1.96 2.37 0.46 0.51 0.98 0.41 1.34 1.76 0.46 0.46 0.92 0.41 1.03 1.44 0.45 0.42 0.87DP 3 X 5 7/8 0.41 2.58 2.99 0.47 0.55 1.02 0.41 1.91 2.32 0.47 0.51 0.98 0.41 1.31 1.72 0.46 0.46 0.92 0.41 1.01 1.42 0.46 0.41 0.87DG 3 X 8 5/8 0.40 1.95 2.35 0.52 0.49 1.01 0.40 1.47 1.87 0.51 0.45 0.96 0.40 1.05 1.45 0.50 0.39 0.89 0.40 0.83 1.23 0.48 0.36 0.84

FC 3 1/2 X 4 1/8 0.30 2.79 3.09 0.32 0.43 0.75 0.30 2.03 2.33 0.31 0.41 0.72 0.30 1.36 1.65 0.31 0.38 0.69 0.30 1.02 1.31 0.31 0.35 0.66FD 3 1/2 X 4 5/8 0.30 2.58 2.88 0.33 0.42 0.75 0.30 1.88 2.19 0.33 0.40 0.73 0.30 1.27 1.57 0.32 0.37 0.69 0.30 0.96 1.26 0.32 0.34 0.66FE 3 1/2 X 5 1/8 0.31 2.40 2.71 0.34 0.42 0.76 0.31 1.76 2.07 0.34 0.39 0.73 0.31 1.20 1.51 0.34 0.36 0.70 0.31 0.91 1.22 0.33 0.33 0.67FF 3 1/2 X 5 5/8 0.31 2.24 2.56 0.35 0.41 0.76 0.31 1.66 1.97 0.35 0.39 0.74 0.31 1.14 1.45 0.35 0.35 0.70 0.31 0.87 1.19 0.34 0.33 0.67FP 3 1/2 X 5 7/8 0.31 2.18 2.49 0.36 0.41 0.77 0.32 1.61 1.93 0.36 0.38 0.74 0.32 1.11 1.43 0.35 0.35 0.70 0.32 0.86 1.17 0.35 0.32 0.67FG 3 1/2 X 8 5/8 0.31 1.67 1.98 0.40 0.37 0.78 0.31 1.26 1.58 0.40 0.34 0.74 0.32 0.91 1.22 0.39 0.31 0.70 0.32 0.72 1.04 0.38 0.28 0.66

Thermal Resistance Chart °C/W Computergrade Capacitors

Shelf LifeAluminum electrolytic capacitors stored for more than 5 to10 years may have increased levels of DC leakage current.Check if DCL meets application requirements before plac-ing in service. Recondition high DCL units by applyingrated voltage through 1,000 resistor for 30 minutes.

Shelf life is a measure of how the capacitors will withstandstorage for long times especially at high temperature. To

test shelf life place the capacitors in an oven set to theshelf-life test temperature –0 +3 °C for the shelf-life testperiod. Upon completion of the test stabilize the capacitorsat 25 °C for 24 h or more. Apply the rated voltage for 30minutes, then verify the post test limits. Unless otherwisespecified the capacitance, DCL and ESR will meet initialrequirements.

The Free-Convection cooling column shows a total thermalresistance of 3.07 °C/W for air on all sides and 1.02 °C/W forthe capacitor pressed against a large metal plate or chassis.With 4 W the 3.07 °C/W predicts a temperature rise of 12.3 °C,

and 1.02 °C/W predicts 4.1 °C. The 1.02 °C assumes that thereis no temperature rise in the metal plate. So, consider it the bestyou can do. Increase the Air & Metal Chassis thermal resistanceby 0.3 °C/W if you do not use a thermal pad.


CORNELLDUBILIER


Aluminum

ApplicationGuide


Soldering

PreheatDon’t exceed the maximum storage temperature duringpreheating of the capacitors. If this cannot be avoided,contact the supplier first.

Temperature and DurationStrictly adhere to soldering conditions for temperature,duration and minimum distance of solder from body.Don’t contact the insulating sleeve or other plastic partswith a soldering iron or molten solder. Reflow solder onlySMT types, and then only one reflow cycle. Contact thesupplier if more than one reflow is necessary.

Care after SolderingDo not exert any mechanical force like bending, straighten-ing, twisting or tilting of capacitors after soldering into aprinted circuit board.

Handling Assembled DevicesDuring transport and handling of assembled devices do notmisuse capacitors as a handle. Ensure that capacitors areprotected from physical damage during mounting of printedcircuit boards into assemblies or during stacking.

Halogenated-Solvent CleaningHalogenated hydrocarbon solvents (CFC) are ozone deplet-ing chemicals harmful to the environment. Such solventscan penetrate the capacitors’ seals and cause corrosion andfailure when voltage is applied, and so use them to cleanaluminum electrolytic capacitors only to the limited condi-tions given by the component supplier and then only as alast resort. Solvent-proof miniature capacitors and capaci-tors with epoxy endseals are available for limited use withhalogenated solvents.

Aqueous CleaningWater with a mild detergent may be used to clean aluminumelectrolytic capacitors. However, immediately dry the capac-itors in hot air at about 85 °C for 5 or more minutes but nothotter than the capacitors’ maximum storage temperature.Water can become trapped beneath the sleeve which maynot be dispelled by evaporation at room temperature.Water can be trapped under the sleeve and cause hydrationand discoloration of the aluminum cases, although this doesnot affect capacitor operation.

Alcohol CleaningAlcohol solvents like isopropanol, methanol, ethanol andpropanol have no harmful affects on aluminum electrolyticcapacitors. While they are fine for cleaning, they are notvery effective in removal of commercial soldering fluxes.

Cleaning PrecautionsThe capacitor’s insulating sleeve may re-shrink or crack ifrapidly heated to above 100 °C just after cleaning. If thesolder flux contains chlorine as many active flux types do,frequently regenerate or replace the cleaning solvent toavoid damaging the capacitors. Cleaning solvents mayswell the insulating sleeves and affect the legibility ofmarking if applied too long or with too high mechanicalforces or temperatures.

Potting and gluingBe certain that varnishing, coating, lacquering, embeddingor gluing near the capacitors’ seals are halogen free. Andbe sure all constituent parts including base material, thin-ners, binders, reacting agents, propellants and additives arehalogen free. If the printed circuit board has been cleanedwith halogenated solvent, be sure it’s fully dry beforeinstallation of capacitors. When gluing, don’t apply glue tothe full capacitor circumference, and don’t cover the capac-itor’s pressure-relief vent with potting or glue.

Process Considerations

MountingMounting positionAt lower ambient temperatures aluminum electrolyticcapacitors have longer operating lives; so, put the capaci-tors at the coolest place on the board. Ensure that aluminumelectrolytic capacitors are away from hot components likepower resistors, power transistors or diodes and transformers.Adequately space components apart for cooling air to circu-late. This is especially important when high ripple currentor charge/discharge loads are applied.

Polarity indicationAluminum electrolytic capacitors are normally polarizedand require correct-polarity installation in the circuitry. Toensure correct mounting and identification of the polarity,put a clear + and/or – on the board layout marking. If thecircuit voltage can reverse polarity or is unknown, considerusing non-polar capacitors. Disadvantages are that non-polar capacitors are larger and more expensive.




CORNELLDUBILIER


Alum

inum

Appl

icat

ion

Guid


and, perhaps, safety-vent plugs made of synthetic rubber.If incinerated, be certain that the temperature is more than1200 °C. Disposal is permitted in appropriate landfills.For more details contact the manufacturer.

Disposal of Capacitors

Screw-terminal mounting torqueExcess torque during tightening screw terminals may affectthe performance of the capacitor or damage the terminal.The following torque settings are recommended. Be certainthat at least six threads are engaged.

Terminal Recommended Torque

10–32, Low Post 25 in-lb

10–32, High Post 25 in-lb1⁄4 –28, Low Post 50 in-lb1⁄4 –28, High Post 60 in-lb

M5 Post 30 in-lb

Screw-terminal current ratingFor normal operation the maximum recommended continu-ous AC currents for screw terminals are as tabulated below.

Terminal Maximum Current

10–32, Low Post 30 A rms

10–32, High Post 30 A rms1⁄4 –28, Low Post 50 A rms1⁄4 –28, High Post 50 A rms

M5 Post 35 A rms

The ripple current ratings may exceed the currents listedhere. Terminals can withstand these higher continuous cur-rents if you assure gas-tight connections to avoid formationof aluminum oxide. Use Belleville washers and a commercialelectrical joint compound, and tighten the terminals to theirrecommended torque.

Mounting-stud mounting torqueComputergrade, screw-terminal capacitors are availablewith threaded mounting studs on the can bottoms, andnylon nuts are available for insulated mounting. The fol-lowing torque settings are recommended.

Nylon Nut Thread Recommended Torque

M8 25 in-lb

M12 75 in-lb

Position of the pressure-relief deviceProvide adequate clearance for proper operation of thepressure-relief devise. The following distances are a guide.

Nominal Case Space aroundDiameter pressure relief device

≤ 16 mm > 2 mm

> 16 mm to < 40 mm > 3 mm

≥ 40 mm > 5 mm

Mount the capacitors with the vent uppermost or in theupper part of the capacitor. This assures that the leastamount of electrolyte will be expelled if the vent operates.Mount capacitors that include thermal-plastic potting suchthat the potting cannot block the vent should the pottingmelt during capacitor failure. No Cornell Dubilier alu-minum electrolytic capacitors contain potting.

Printed-circuit board precautionsAvoid positioning holes in places where parts of a capacitorcould be on the other side and be touched by molten solder.Because the can and sometimes extra terminals of an alu-minum electrolytic capacitor have resistive connections to thenegative terminal through the electrolyte,

don’t locate tracks or lands under upright capacitors,

don’t permit metal capacitor parts other than activeterminals to contact conductive tracks or othercomponents, and

leave dummy pins potential free.

Handling terminalsBefore handling a capacitor be sure it is sufficiently dis-charged. To avoid damaging the capacitor, don’t bend rigidterminals, and be sure to clamp the terminals during cuttingor bending to avoid excess stress on terminations, welds andcapacitor seals.

Don’t use extra force to insert capacitors. If they cannot beinserted easily, correct the problem. Discard capacitorsshowing signs of mechanical damage.

Aluminum electrolytic capacitors with non-solid electrolyteprincipally include high-purity aluminum foils, capacitorpaper, electrolyte, aluminum case, cover and sealing parts(phenolic, thermoplastic, rubber and phenolic board), insu-lating sleeve (polypropylene, polyester or polyvinylchloride)

FilmCapacitors

Film Capacitors




Film

Capa

cito

rs

CORNELLDUBILIER


Selector Guide, Film Capacitors

*Full rated voltage at 85°C—Derate linearly to 50% rated voltage at max. operating temperature shown.

Dielectric Form Factor Construction Type Capacitance Capacitance Voltage Temperature DissipationRange µF Tolerance Range Range Factor

Polyester Capacitors

Axial Film/Foil WMF .001-5 ±5%,±10% 50-600 Vdc -55°C to 125°C* .75% Max.Round (35-250 Vac)Axial Film/Foil WMC .0047-.47 ±5%,±10% 80-400 Vdc -55°C to 125°C* .75% Max.Round (50-200 Vac)Axial Metallized MMA .01-5 ±5%,±10% 125-480 Vac -55°C to 125°C* .60% Max.Oval (250-1000 Vdc)Axial Metallized MMP .01-10 ±5%,±10% 100-630 Vdc -55°C to 125°C* 1% Max.Oval (65-250 Vac)Axial Metallized MMWA .01-10 ±5%,±10% 50-1000 Vdc -55°C to 125°C* .75% Max.Round (35-480 Vac)Radial Film/Foil DLR .001-.68 ±5%,±10% 100 Vdc -55°C to 125°C* 1% Max.Oval (63 Vac)Radial Film/Foil DMT .001-1.0 ±5%,±10% 100-600 Vdc -55°C to 125°C* 1% Max.Oval (65-250 Vac)Radial Stacked DSF .01-2.2 ±5%,±10% 50-100 Vdc -40°C to 125°C* 1% Max.Oval MetallizedRadial Metallized DME .01-10 ±5%,±10% 100-1000 Vdc -55°C to 125°C* 1% Max.Oval (65-250 Vac)Radial Metallized DMM .01-10 ±5%,±10% 100-630 Vdc -55°C to 125°C* 1% Max.Oval (65-250 Vac)Radial Metallized DMMA .01-5 ±5%,±10% 125-480 Vac -55°C to 125°C* .60% Max.Oval

Polypropylene Capacitors

Axial Film/Foil WPP .001-3 ±5%,±10% 100-1000 Vdc -55°C to 105°C .10% Max.Round (70-250 Vac)Axial Metallized 930 .022-10 ±5%,±10%,±20% 100-630 Vdc -55°C to 105°C* .10% Max.Round (70-275 Vac)Axial Metallized 935 1-30 ±5%,±10% 100-400 Vdc -55°C to 105°C .10% Max.Round (70-275 Vac)Axial Metallized 940C .1-4.7 ±10% 600-3000 Vdc -55°C to 105°C <0.1% @Round (275-750 Vac) 1kHz, 25°CAxial Metallized 941C .1-4.7 ±10% 600-3000 Vdc -55°C to 105°C <0.1% @Oval (275-750 Vac) 1kHz, 25°CAxial Film/Foil 942C .01-2.5 ±10% 600-2000 Vdc -55°C to 105°C <0.1% @Round Hybrid (300-500 Vac) 1kHz, 25°CAxial Film/Foil 943C .01-2.5 ±10% 600-3000 Vdc -55°C to 105°C <0.1% @Oval Hybrid (300-500 Vac) 1kHz, 25°CAxial Metallized 950 5-65 ±6%,±10% 250 Vac -55°C to 90°C .15% Max.RoundRadial Film/Foil DPP .001-.47 ±5%,±10% 100-630 Vdc -55°C to 105°C* .10% Max.Oval (70-275 Vac)Radial Film/Foil DPFF .001-.47 ±5% 200-1600 Vdc -55°C to 105°C* .10% Max.Round (155-500 Vac)Radial Film/Foil DPPM .001-.047 ±5%,±10% 1000-2000 Vdc -55°C to 105°C* .10% Max.Oval (450-500 Vac)Radial Metallized DPM .01-6.8 ±5%,±10% 250-630 Vdc -55°C to 105°C* .10% Max.Oval (160-250 Vac)Radial Metallized MPX .0047-1.0 ±5%,±10% 250 Vac -40°C to 85°C .10% Max.Box

PPS Film Chip Capacitors

Stacked FCP 0.0001-0.1 ±2%,±5% 16 & 50 Vdc -55°C to 125°C 0.6%

1605 East Rodney French BoulevardNew Bedford, MA 02744(508) 996-8564, Fax (508) 996-3830http://www.cornell-dubilier.comE-mail: [email protected] 3.001

Selector Guide, Film CapacitorsFilm

Capacitors

CORNELLDUBILIER


Insulation Dieletric Life Test Product Strengths Applications Page NumberResistance Strength

30,000 M x µF 250% 500 hours at 85°C Wide Range of Commercial 3.002

100,000 M Min. at 125% Rated Voltage Capacitance and Voltage Industrial30,000 M x µF 250% 250 hours at 85°C Miniature Size Modules 3.004100,000 M Min. at 125% Rated Voltage General Purpose10,000 M x µF 200% 500 hours at 85° C High Vac Capability AC Applications 3.00630,000 M Min. at 115% Rated Voltage Self Healing5,000 M x µF 175% 1,000 hours at 85°C Low Profile Circuit Cards 3.00810,000 M Min. at 125% Rated Voltage Self Healing General Purpose10,000 M x µF 200% 500 hours at 85°C Wide Range of C and V General Purpose 3.01030,000 M Min. at 125% Rated Voltage Self Healing30,000 M Min. 160% 1,000 hours at 85°C Compact Size General Purpose 3.012

at 125% Rated Voltage Auto Insertable Inductive Style30,000 M x µF 250% 500 hours at 85°C Wide Range of General Purpose 3.013100,000 M Min. at 125% Rated Voltage Cap. and Voltage1,000 M x µF 150% 1,000 hours at 85°C Subminiature Size General Purpose 3.015

at 125% Rated Voltage3,000 M x µF 150% 1,000 hours at 85°C Compact Size DC Applications 3.0179,000 M Min. at 125% Rated Voltage Auto Insertable General Purpose5,000 M x µF 150% 1,000 hours at 85°C Optional Lead Spacing DC Applications 3.02010,000 M Min. at 125% Rated Voltage Self Healing General Purpose10,000 M x µF 200% 500 hours at 85°C High Vac Capability AC Applications 3.02230,000 M Min. at 115% Rated Voltage Self Healing

100,000 M x µF 160% 500 hours at 85°C Close Tolerances High Frequency 3.024200,000 M Min. at 125% Rated Voltage High Stability Precise Values200,000 M x µF 200% 1,000 hours at 85°C Wide Range of Cap. High Voltage/Frequency 3.026400,000 M Min. at 125% Rated Voltage High Stability Switching Power Supplies200,000 M x µF 200% 1,000 hours at 85°C Low ESR Power Supplies 3.029

at 125% Rated Voltage U.L. Approved High Current Circuits>100,000 M x µF 160% 2,000 hours at 85°C Low ESR Snubber 3.032at 100 Vdc, 2 Min. at 125% Rated Voltage High dV/dt>100,000 M x µF 160% 2,000 hours at 85°C Low ESR Snubber 3.034at 100 Vdc, 2 Min. at 125% Rated Voltage High dV/dt>100,000 M x µF 160% 2,000 hours at 85°C High Peak High Current 3.036at 100 Vdc, 2 Min. at 125% Rated Voltage Current Snubbers>100,000 M x µF 160% 2,000 hours at 85°C Low Profile Snubbers 3.038at 100 Vdc, 2 Min. at 125% Rated Voltage High Current100,000 M x µF 200% 1,000 hours at 90°C Low ESR Motor Run 3.040

at 125% Rated Voltage Discharge Lighting50,000 M x µF 200% 1,000 hours at 85°C High Peak Current High Frequency 3.042100,000 M Min. at 125% Rated Voltage Precise Values200,000 M x µF 250% (800 Vdc & less) 500 hours at 85°C High Voltage High Current 3.044400,000 M Min. 200% (1,200 & 1,600 Vdc) at 125% Rated Voltage High Peak Current Resonant Circuits400,000 M Min. 175% 500 hours at 85°C High Voltage High Capacitance 3.046

at 125% Rated Voltage Self-Healing Snubbers10,000 M x µF 175% 1,000 hours at 85°C Low ESR High Current 3.04830,000 M Min. at 125% Rated Voltage Optional Lead Spacing General Purpose10,000 M x µF 2100 Vdc 1,008 hours at 85°C X2 Agency Vac Across- 3.05030,000 M Min. per UL 1414 Approvals the-line

3,000 M Min. 175% 1,000 hours at 125°C As stable General Purpose 1.053at 125% Rated Voltage as COG ceramic & Precision




Film

Capa

cito

rs

CORNELLDUBILIER


Pulse CapabilityBody Length

RatedVolts .562 .687 .812 .937-1.187 1.250-1.750 ≥1.812

dV/dt—volts per microsecond, maximum50 1500 920 660 310

100 6300 3200 2100 1600 840 360200 7500 3700 2500 1900 1500 650400 14400 7200 3600 2400 1300600 5800 3700 1600

Type WMF, Polyester Film Capacitors

Cap. Catalog D L d µF Number Inches (mm) Inches (mm) Inches (mm)

50 Vdc (35 Vac).0820 WMF05S82K .280 (7.1) .812 (20.6) .020 (.5).1000 WMF05P1K .280 (7.1) .812 (20.6) .020 (.5).1500 WMF05P15K .315 (8.0) .812 (20.6) .024 (.6).2200 WMF05P22K .360 (9.1) .812 (20.6) .024 (.6).2700 WMF05P27K .422 (10.7) .812 (20.6) .024 (.6).3300 WMF05P33K .430 (10.9) .812 (20.6) .024 (.6).3900 WMF05P39K .405 (10.3) 1.062 (27.0) .024 (.6).4700 WMFO5P47K .407 (10.3) 1.062 (27.0) .024 (.6).5000 WMF05P5K .427 (10.8) 1.062 (27.0) .024 (.6).5600 WMF05P56K .482 (12.2) 1.062 (27.0) .024 (.6).6800 WMF05P68K .522 (13.3) 1.062 (27.0) .024 (.6).8200 WMF05P82K .567 (14.4) 1.062 (27.0) .032 (.8)

1.0000 WMF05W1K .562 (14.3) 1.375 (34.9) .024 (.6)1.2500 WMF05W1P25K .575 (14.6) 1.375 (34.9) .032 (.8)1.5000 WMF05W1P5K .645 (16.4) 1.375 (34.9) .032 (.8)2.0000 WMF05W2K .662 (16.8) 1.625 (41.3) .032 (.8)3.0000 WMF05W3K .792 (20.1) 1.625 (41.3) .040 (1.0)4.0000 WMF05W4K .822 (20.9) 1.825 (46.3) .040 (1.0)5.0000 WMF05W5K .912 (23.2) 1.825 (46.3) .040 (1.0)

100 Vdc (65 Vac).0010 WMF1D1K .188 (4.8) .562 (14.3) .020 (.5).0015 WMF1D15K .188 (4.8) .562 (14.3) .020 (.5)

Film/Foil Axial Leads Commercial, IndustrialApplications

Specifications

Type WMF axial-leaded, polyester film/foil capaci-tors, available in a wide range of capacitance andvoltage ratings, offer excellent moisture resistancecapability with extended foil, non-inductive woundsections, epoxy sealed ends and a sealed outerwrapper. Like the Type DMT, Type WMF is an idealchoice for most applications especially those withhigh peak currents.

Voltage Range: 50-600 Vdc (35-250 Vac)Capacitance Range: .001-5 µFCapacitance Tolerance: ±10% (K) standard

±5% (J) optional

Operating Temperature Range: -55°C to 125°C*Dielectric Strength: 250% (1 minute)Dissipation Factor: .75% Max. (25°C, 1 kHz)Insulation Resistance: 30,000 M x µF

100,000 M Min.Life Test: 500 Hours at 85°C at 125% Rated Voltage*Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 125°C

Ratings and Dimensions Cap. Catalog D L d µF Number Inches (mm) Inches (mm) Inches (mm)

100 Vdc (65 Vac) (cont’d).0022 WMF1D22K .188 (4.8) .562 (14.3) .020 (.5).0027 WMF1D27K .188 (4.8) .562 (14.3) .020 (.5).0033 WMF1D33K .188 (4.8) .562 (14.3) .020 (.5).0039 WMF1D39K .188 (4.8) .562 (14.3) .020 (.5).0047 WMF1D47K .197 (5.0) .562 (14.3) .020 (.5).0050 WMF1D5K .188 (4.8) .562 (14.3) .020 (.5).0056 WMF1D56K .188 (4.8) .562 (14.3) .020 (.5).0068 WMF1D68K .200 (5.1) .562 (14.3) .020 (.5).0082 WMF1D82K .200 (5.1) .562 (14.3) .020 (.5).0100 WMF1S1K .200 (5.1) .562 (14.3) .020 (.5).0150 WMF1S15K .245 (6.2) .562 (14.3) .020 (.5).0220 WMF1S22K .236 (6.0) .687 (17.4) .024 (.6).0270 WMF1S27K .235 (6.0) .687 (17.4) .024 (.6).0330 WMF1S33K .256 (6.5) .687 (17.4) .024 (.6).0390 WMF1S39K .240 (6.1) .812 (20.6) .024 (.6).0470 WMF1S47K .255 (6.5) .812 (20.6) .024 (.6).0500 WMF1S5K .260 (6.6) .812 (20.6) .024 (.6).0560 WMF1S56K .265 (6.7) .812 (20.6) .024 (.6).0680 WMF1S68K .295 (7.5) .812 (20.6) .024 (.6).0820 WMF1S82K .275 (7.0) .937 (23.8) .024 (.6).1000 WMF1P1K .335 (8.5) .937 (23.8) .024 (.6).1500 WMF1P15K .340 (8.6) .937 (23.8) .024 (.6).2200 WMF1P22K .374 (9.5) 1.062 (27.0) .024 (.6)

1.50”(38.1mm)

L MAX. 1.50”(38.1mm)

MAX.D

d TINNED COPPER-CLAD STEEL LEADS

Normally Stocked

NOTE: Other capacitance values, sizes and performance specifications areavailable. Contact us.


CORNELLDUBILIER


Type WMF, Polyester Film Capacitors

Cap. Catalog D L dµF Number Inches (mm) Inches (mm) Inches (mm)

100 Vdc (65 Vac) (cont’d).2700 WMF1P27K .375 (9.5) 1.187 (30.1) .024 (.6).3300 WMF1P33K .413 (10.5) 1.187 (30.1) .024 (.6).3900 WMF1P39K .430 (10.9) 1.187 (30.1) .024 (.6).4700 WMF1P47K .492 (12.5) 1.250 (31.7) .024 (.6).5000 WMF1P5K .460 (11.7) 1.250 (31.7) .024 (.6).5600 WMF1P56K .485 (12.3) 1.250 (31.7) .032 (.8).6800 WMF1P68K .570 (14.5) 1.250 (31.7) .032 (.8).8200 WMF1P82K .540 (13.7) 1.412 (35.9) .032 (.8)

1.0000 WMF1W1K .669 (17.0) 1.500 (38.1) .040 (1.0)1.2500 WMF1W1P25K .645 (16.4) 1.500 (38.1) .040 (1.0)1.5000 WMF1W1P5K .735 (18.7) 1.625 (41.3) .040 (1.0)2.0000 WMF1W2K .835 (21.2) 1.625 (41.3) .040 (1.0)

200/250 Vdc (125 Vac).0010 WMF2D1K .188 (4.8) .562 (14.3) .020 (.5).0015 WMF2D15K .188 (4.8) .562 (14.3) .020 (.5).0022 WMF2D22K .188 (4.8) .562 (14.3) .020 (.5).0027 WMF2D27K .188 (4.8) .562 (14.3) .020 (.5).0033 WMF2D33K .188 (4.8) .562 (14.3) .020 (.5).0039 WMF2D39K .188 (4.8) .562 (14.3) .020 (.5).0047 WMF2D47K .202 (5.1) .562 (14.3) .020 (.5).0050 WMF2D5K .202 (5.1) .562 (14.3) .020 (.5).0056 WMF2D56K .202 (5.1) .562 (14.3) .020 (.5).0068 WMF2D68K .202 (5.1) .562 (14.3) .020 (.5).0082 WMF2D82K .215 (5.5) .562 (14.3) .020 (.5).0100 WMF2S1K .230 (5.8) .562 (14.3) .020 (.5).0150 WMF2S15K .265 (6.7) .562 (14.3) .024 (.6).0220 WMF2S22K .260 (6.6) .687 (17.4) .024 (.6).0270 WMF2S27K .260 (6.6) .687 (17.4) .024 (.6).0330 WMF2S33K .275 (7.0) .812 (20.6) .024 (.6).0390 WMF2S39K .295 (7.5) .812 (20.6) .024 (.6).0470 WMF2S47K .295 (7.5) .812 (20.6) .024 (.6).0560 WMF2S56K .295 (7.5) .812 (20.6) .024 (.6).0680 WMF2S68K .315 (8.0) .812 (20.6) .024 (.6).0820 WMF2S82K .300 (7.6) .937 (23.8) .024 (.6).1000 WMF2P1K .320 (8.1) .937 (23.8) .024 (.6).1500 WMF2P15K .375 (9.5) .937 (23.8) .024 (.6).2200 WMF2P22K .413 (10.5) 1.187 (30.1) .024 (.6).2700 WMF2P27K .500 (12.7) 1.187 (30.1) .024 (.6).3300 WMF2P33K .545 (13.8) 1.260 (32.0) .024 (.6).3900 WMF2P39K .565 (14.3) 1.312 (33.3) .032 (.8).4700 WMF2P47K .610 (15.5) 1.312 (33.3) .032 (.8).5600 WMF2P56K .660 (16.8) 1.312 (33.3) .040 (1.0).6800 WMF2P68K .660 (16.8) 1.625 (41.3) .040 (1.0).8200 WMF2P82K .715 (18.2) 1.625 (41.3) .040 (1.0)

1.0000 WMF2W1K .740 (18.8) 1.750 (44.4) .040 (1.0)1.2500 WMF2W1P25K .815 (20.7) 1.750 (44.4) .040 (1.0)1.5000 WMF2W1P5K .809 (20.5) 1.812 (46.0) .040 (1.0)2.0000 WMF2W2K .965 (24.5) 1.875 (47.6) .040 (1.0)

400 Vdc (200 Vac).0010 WMF4D1K .188 (4.8) .687 (17.4) .020 (.5).0015 WMF4D15K .188 (4.8) .687 (17.4) .020 (.5).0022 WMF4D22K .188 (4.8) .687 (17.4) .020 (.5).0027 WMF4D27K .210 (5.3) .687 (17.4) .020 (.5).0033 WMF4D33K .222 (5.6) .687 (17.4) .020 (.5).0039 WMF4D39K .232 (5.9) .687 (17.4) .020 (.5).0047 WMF4D47K .236 (6.0) .687 (17.4) .020 (.5).0056 WMF4D56K .265 (6.7) .687 (17.4) .024 (.6)


400 Vdc (200 Vac) (cont’d).0068 WMF4D68K .282 (7.2) .687 (17.4) .024 (.6).0082 WMF4D82K .305 (7.7) .687 (17.4) .024 (.6).0100 WMF4S1K .330 (8.4) .687 (17.4) .024 (.6).0150 WMF4S15K .390 (9.9) .687 (17.4) .024 (.6).0220 WMF4S22K .350 (8.9) .812 (20.6) .024 (.6).0270 WMF4S27K .380 (9.6) .812 (20.6) .024 (.6).0330 WMF4S33K .375 (9.5) .875 (22.2) .024 (.6).0390 WMF4S39K .400 (10.2) .875 (22.2) .024 (.6).0470 WMF4S47K .432 (11.0) .875 (22.2) .024 (.6).0560 WMF4S56K .385 (9.8) 1.062 (27.0) .024 (.6).0680 WMF4S68K .405 (10.3) 1.062 (27.0) .024 (.6).0820 WMF4S82K .405 (10.3) 1.062 (27.0) .024 (.6).1000 WMF4P1K .490 (12.4) 1.062 (27.0) .024 (.6).1500 WMF4P15K .535 (13.6) 1.250 (31.7) .024 (.6).2200 WMF4P22K .595 (15.1) 1.375 (34.9) .032 (.8).2700 WMF4P27K .610 (15.5) 1.500 (38.1) .032 (.8).3300 WMF4P33K .625 (15.9) 1.625 (41.3) .032 (.8).3900 WMF4P39K .625 (15.9) 1.625 (41.3) .032 (.8).4700 WMF4P47K .730 (18.5) 1.625 (41.3) .040 (1.0).5600 WMF4P56K .755 (19.2) 1.750 (44.4) .040 (1.0).6800 WMF4P68K .820 (20.8) 1.750 (44.4) .040 (1.0).8200 WMF4P82K .895 (22.7) 1.750 (44.4) .040 (1.0)

1.0000 WMF4W1K .895 (22.7) 2.000 (50.8) .040 (1.0)1.2500 WMF4W1P25K .990 (25.1) 2.000 (50.8) .040 (1.0)1.5000 WMF4W1P5K .995 (25.3) 2.312 (58.7) .040 (1.0)

600/630 Vdc (250 Vac).0010 WMF6D1K .195 (5.0) .812 (20.6) .020 (.5).0015 WMF6D15K .202 (5.1) .812 (20.6) .020 (.5).0022 WMF6D22K .216 (5.5) .812 (20.6) .020 (.5).0027 WMF6D27K .215 (5.5) .812 (20.6) .020 (.5).0033 WMF6D33K .230 (5.8) .812 (20.6) .020 (.5).0039 WMF6D39K .240 (6.1) .812 (20.6) .020 (.5).0047 WMF6D47K .260 (6.6) .812 (20.6) .020 (.5).0056 WMF6D56K .270 (6.9) .812 (20.6) .024 (.6).0068 WMF6D68K .290 (7.4) .812 (20.6) .024 (.6).0082 WMF6D82K .290 (7.4) .812 (20.6) .024 (.6).0100 WMF6S1K .290 (7.4) .812 (20.6) .024 (.6).0150 WMF6S15K .295 (7.5) .937 (23.8) .024 (.6).0220 WMF6S22K .335 (8.5) .937 (23.8) .024 (.6).0270 WMF6S27K .365 (9.3) .937 (23.8) .024 (.6).0330 WMF6S33K .394 (10.0) 1.000 (25.4) .024 (.6).0390 WMF6S39K .395 (10.0) 1.000 (25.4) .024 (.6).0470 WMF6S47K .430 (10.9) 1.000 (25.4) .024 (.6).0560 WMF6S56K .460 (11.7) 1.000 (25.4) .024 (.6).0680 WMF6S68K .500 (12.7) 1.000 (25.4) .032 (.8).0820 WMF6S82K .507 (12.9) 1.375 (34.9) .032 (.8).1000 WMF6P1K .580 (14.7) 1.375 (34.9) .032 (.8).1500 WMF6P15K .687 (17.4) 1.375 (34.9) .040 (1.0).2200 WMF6P22K .722 (18.3) 1.625 (41.3) .040 (1.0).2700 WMF6P27K .792 (20.1) 1.625 (41.3) .040 (1.0).3300 WMF6P33K .749 (19.0) 2.000 (50.8) .040 (1.0).3900 WMF6P39K .815 (20.7) 2.000 (50.8) .040 (1.0).4700 WMF6P47K .885 (22.5) 2.000 (50.8) .040 (1.0).5600 WMF6P56K .952 (24.2) 2.000 (50.8) .040 (1.0).6800 WMF6P68K 1.032 (26.2) 2.000 (50.8) .040 (1.0).8200 WMF6P82K 1.160 (29.5) 2.000 (50.8) .040 (1.0)

1.0000 WMF6W1K 1.185 (30.1) 2.562 (65.1) .040 (1.0)

Ratings and Dimensions Normally Stocked

FilmCapacitors




Film

Capa

cito

rs

CORNELLDUBILIER


Type WMC, Polyester Film Capacitors

Film/Foil Axial Leads Miniature SizeAutomatic Insertion

Specifications

Type WMC axial-leaded, polyester film/foil capac-itors are ideal for automatic insertion in printedcircuit boards. An ultraminiature version of TypeWMF, the sections of this capacitor are extendedfoil, polyester film, non-inductive design withtinned, copper-clad steel leads.

Voltage Range: 80-400 Vdc (50-200 Vac)Capacitance Range: .001-.47 µFCapacitance Tolerance: ±10% (K) standard

±5% (J) optionalOperating Temperature Range: -55°C to 125°C**Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 125°C

Dielectric Strength: 250% (1 minute)Dissipation Factor: .75% Max. (25°C, 1kHz)Insulation Resistance: 30,000 M x µF

100,000 M Min.Life Test: 250 Hours at 85°C at 125% Rated Voltage


RatedVolts ≤.437 .531-.593 .656-.718 .906 1.218

dV/dt—volts per microsecond, maximum

80 5000 2100 1500 900 690200 10800 5000 3000 1700 1260400 30700 14500 9600 3600 2600

LEAD DIAMETERS:No. 24 AWG to .282” (6.35mm) diameterNo. 22 AWG .283” (6.38mm) diameter and up

Ratings and Dimensions Cap. Catalog D L d

µF Number Inches (mm) Inches (mm) Inches (mm)

80 Vdc (50 Vac).0010 WMC08D1K .185 (4.7) .406 (10.3) .020 (.5).0012 WMC08D12K .185 (4.7) .406 (10.3) .020 (.5).0015 WMC08D15K .185 (4.7) .406 (10.3) .020 (.5).0018 WMC08D18K .185 (4.7) .406 (10.3) .020 (.5).0022 WMC08D22K .185 (4.7) .406 (10.3) .020 (.5).0027 WMC08D27K .185 (4.7) .406 (10.3) .020 (.5).0033 WMC08D33K .185 (4.7) .406 (10.3) .020 (.5).0039 WMC08D39K .185 (4.7) .406 (10.3) .020 (.5).0047 WMC08D47K .185 (4.7) .406 (10.3) .020 (.5).0056 WMC08D56K .185 (4.7) .406 (10.3) .020 (.5).0068 WMC08D68K .185 (4.7) .406 (10.3) .020 (.5).0082 WMC08D82K .185 (4.7) .406 (10.3) .020 (.5).0100 WMC08S1K .185 (4.7) .406 (10.3) .020 (.5).0120 WMC08S12K .185 (4.7) .468 (11.9) .020 (.5).0150 WMC08S15K .185 (4.7) .468 (11.9) .020 (.5).0180 WMC08S18K .185 (4.7) .531 (13.5) .020 (.5).0220 WMC08S22K .185 (4.7) .531 (13.5) .020 (.5).0270 WMC08S27K .229 (5.8) .468 (11.9) .020 (.5)


80 Vdc (50 Vac) (cont’d).03300 WMC08S33K .229 (5.8) .468 (11.9) .020 (.5).03900 WMC08S39K .229 (5.8) .593 (15.1) .020 (.5).04700 WMC08S47K .229 (5.8) .593 (15.1) .020 (.5).05600 WMC08S56K .250 (6.3) .593 (15.1) .020 (.5).06800 WMC08S68K .250 (6.3) .593 (15.1) .020 (.5).08200 WMC08S82K .343 (8.7) .531 (13.5) .024 (.6).10000 WMC08P1K .343 (8.7) .531 (13.5) .024 (.6).12000 WMC08P12K .343 (8.7) .656 (16.7) .024 (.6).15000 WMC08P15K .343 (8.7) .656 (16.7) .024 (.6).18000 WMC08P18K .382 (9.7) .656 (16.7) .024 (.6).22000 WMC08P22K .382 (9.7) .656 (16.7) .024 (.6).27000 WMC08P27K .382 (9.7) .905 (23.0) .024 (.6).33000 WMC08P33K .382 (9.7) .905 (23.0) .024 (.6).39000 WMC08P39K .382 (9.7) 1.218 (30.9) .024 (.6).47000 WMC08P47K .382 (9.7) 1.218 (30.9) .024 (.6)

200/250 Vdc (125 Vac).00100 WMC2D1K .185 (4.7) .406 (10.3) .020 (.5).00120 WMC2D12K .185 (4.7) .406 (10.3) .020 (.5)

1.50” MIN.(38.1mm) L MAX. 1.50” MIN.

(38.1mm) DMAX.

TINNED COPPER-CLAD STEEL LEADSd

Normally Stocked



FilmCapacitors

CORNELLDUBILIER


Type WMC, Polyester Film Capacitors

Ratings and Dimensions Normally Stocked Cap. Catalog D L d


200/250 Vdc (125 Vac).00150 WMC2D15K .185 (4.7) .406 (10.3) .020 (.5).00180 WMC2D18K .185 (4.7) .406 (10.3) .020 (.5).00220 WMC2D22K .185 (4.7) .406 (10.3) .020 (.5).00270 WMC2D27K .185 (4.7) .406 (10.3) .020 (.5).00330 WMC2D33K .185 (4.7) .468 (11.9) .020 (.5).00390 WMC2D39K .185 (4.7) .468 (11.9) .020 (.5).00470 WMC2D47K .185 (4.7) .468 (11.9) .020 (.5).00560 WMC2D56K .185 (4.7) .468 (11.9) .020 (.5).00680 WMC2D68K .185 (4.7) .468 (11.9) .020 (.5).00820 WMC2D82K .185 (4.7) .531 (13.5) .020 (.5).01000 WMC2S1K .185 (4.7) .531 (13.5) .020 (.5).01200 WMC2S12K .229 (5.8) .468 (11.9) .020 (.5).01500 WMC2S15K .229 (5.8) .468 (11.9) .020 (.5).01800 WMC2S18K .229 (5.8) .656 (16.7) .020 (.5).02200 WMC2S22K .229 (5.8) .656 (16.7) .020 (.5).02700 WMC2S27K .250 (6.3) .656 (16.7) .020 (.5).03300 WMC2S33K .250 (6.3) .656 (16.7) .020 (.5).03900 WMC2S39K .343 (8.7) .531 (13.5) .024 (.6).04700 WMC2S47K .343 (8.7) .531 (13.5) .024 (.6).05600 WMC2S56K .343 (8.7) .656 (16.7) .024 (.6).06800 WMC2S68K .343 (8.7) .656 (16.7) .024 (.6).08200 WMC2S82K .382 (9.7) .656 (16.7) .024 (.6).10000 WMC2P1K .382 (9.7) .656 (16.7) .024 (.6).12000 WMC2P12K .382 (9.7) .906 (23.0) .024 (.6).15000 WMC2P15K .382 (9.7) .906 (23.0) .024 (.6).18000 WMC2P18K .382 (9.7) 1.218 (30.9) .024 (.6).22000 WMC2P22K .382 (9.7) 1.218 (30.9) .024 (.6)


400 Vdc (200 Vac).00100 WMC4D1K .185 (4.7) .468 (11.9) .020 (.5).00120 WMC4D12K .185 (4.7) .468 (11.9) .020 (.5).00150 WMC4D15K .185 (4.7) .468 (11.9) .020 (.5).00180 WMC4D18K .185 (4.7) .531 (13.5) .020 (.5).00220 WMC4D22K .185 (4.7) .531 (13.5) .020 (.5).00270 WMC4D27K .229 (5.8) .531 (13.5) .020 (.5).00330 WMC4D33K .229 (5.8) .531 (13.5) .020 (.5).00390 WMC4D39K .229 (5.8) .531 (13.5) .020 (.5).00470 WMC4D47K .229 (5.8) .531 (13.5) .020 (.5).00560 WMC4D56K .250 (6.3) .656 (16.7) .020 (.5).00680 WMC4D68K .250 (6.3) .656 (16.7) .020 (.5).00820 WMC4D82K .250 (6.3) .656 (16.7) .020 (.5).01000 WMC4S1K .250 (6.3) .656 (16.7) .020 (.5).01200 WMC4S12K .343 (8.7) .593 (15.1) .024 (.6).01500 WMC4S15K .343 (8.7) .593 (15.1) .024 (.6).01800 WMC4S18K .343 (8.7) .718 (18.2) .024 (.6).02200 WMC4S22K .343 (8.7) .718 (18.2) .024 (.6).02700 WMC4S27K .382 (9.7) .718 (18.2) .024 (.6).03300 WMC4S33K .382 (9.7) .718 (18.2) .024 (.6).03900 WMC4S39K .382 (9.7) .906 (23.0) .024 (.6).04700 WMC4S47K .382 (9.7) .906 (23.0) .024 (.6).05600 WMC4S56K .382 (9.7) 1.218 (30.9) .024 (.6).06800 WMC4S68K .382 (9.7) 1.218 (30.9) .024 (.6)




Film

Capa

cito

rs

CORNELLDUBILIER


Type MMA, Polyester Film Capacitors


RatedVolts ≤ .875 1.000-1.250 1.312-1.500 ≥1.750

dV/dt—volts per microsecond, maximum125 34 16 9240 46 22 12360 111 72 42 29480 222 122 65 36

Metallized AC ApplicationsOval, Axial Leads Low ESR

Specifications

Type MMA axial-leaded, metallized polyester capaci-tors are designed for AC applications. Sections fea-ture epoxy end seals to resist moisture and UL 94 V-O rated flame-retardant outer film wrapper. Selfhealing, low DF, and corona free at high AC volt-ages, Type MMA is the axial leaded alternative toType DMMA for medium current, AC applications.This non-protected film capacitor has UnderwritersLaboratories, Inc. recognition for construction only.U.L. File Number assigned is E128034(N).

Voltage Range: 125-480 Vac (250-1000 Vdc)Capacitance Range: .01-5.0 µFCapacitance Tolerance: ±10% (K) standard


Dielectric Strength: 200% (1 minute)Dissipation Factor: .60% Max. (25°C, 1 kHz)Insulation Resistance: 10,000 M x µF


Ratings and Dimensions

Cap. Catalog T W L dµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm)

125 Vac (250 Vdc).047 MMAAS47K .177 (4.5) .275 (7.0) .562 (14.3) .020 (.5).068 MMAAS68K .166 (4.2) .264 (6.7) .687 (17.4) .020 (.5).100 MMAAP1K .186 (4.7) .311 (7.9) .687 (17.4) .024 (.6).150 MMAAP15K .228 (5.8) .353 (9.0) .687 (17.4) .024 (.6).220 MMAAP22K .276 (7.0) .401 (10.2) .687 (17.4) .024 (.6).330 MMAAP33K .339 (8.6) .464 (11.8) .687 (17.4) .024 (.6).470 MMAAP47K .285 (7.2) .410 (10.4) 1.000 (25.4) .024 (.6).680 MMAAP68K .344 (8.7) .469 (11.9) 1.000 (25.4) .032 (.8)

1.000 MMAAW1K .407 (10.3) .572 (14.5) 1.062 (27.0) .032 (.8)1.500 MMAAW1P5K .431 (10.9) .611 (15.5) 1.250 (31.7) .032 (.8)2.000 MMAAW2K .502 (12.7) .682 (17.3) 1.250 (31.7) .032 (.8)3.000 MMAAW3K .540 (13.7) .720 (18.3) 1.500 (38.1) .032 (.8)4.000 MMAAW4K .638 (16.2) .834 (21.2) 1.500 (38.1) .040 (1.0)5.000 MMAAW5K .712 (18.1) .908 (23.1) 1.500 (38.1) .040 (1.0)

240 Vac (400 Vdc).022 MMABS22K .184 (4.7) .282 (7.2) .687 (17.4) .020 (.5).033 MMABS33K .144 (3.7) .269 (6.8) .687 (17.4) .020 (.5).047 MMABS47K .170 (4.3) .295 (7.5) .687 (17.4) .020 (.5)


240 Vac (400 Vdc) (cont’d).068 MMABS68K .203 (5.2) .328 (8.3) .687 (17.4) .020 (.5).100 MMABP1K .175 (4.4) .300 (7.6) 1.000 (25.4) .020 (.5).150 MMABP15K .213 (5.4) .338 (8.6) 1.000 (25.4) .020 (.5).220 MMABP22K .253 (6.4) .378 (9.6) 1.000 (25.4) .024 (.6).330 MMABP33K .302 (7.7) .453 (11.5) 1.000 (25.4) .024 (.6).470 MMABP47K .316 (8.0) .468 (11.9) 1.187 (30.1) .024 (.6).680 MMABP68K .385 (9.8) .536 (13.6) 1.187 (30.1) .032 (.8)

1.000 MMABW1K .453 (11.5) .663 (16.8) 1.250 (31.7) .032 (.8)1.500 MMABW1P5K .488 (12.4) .698 (17.7) 1.500 (38.1) .032 (.8)2.000 MMABW2K .584 (14.8) .780 (19.8) 1.500 (38.1) .040 (1.0)3.000 MMABW3K .732 (18.6) .928 (23.6) 1.500 (38.1) .040 (1.0)

360 Vac (800 Vdc).015 MMACS15K .153 (3.9) .278 (7.1) .875 (22.2) .020 (.5).022 MMACS22K .182 (4.6) .307 (7.8) .875 (22.2) .020 (.5).033 MMACS33K .223 (5.7) .348 (8.8) .875 (22.2) .024 (.6).047 MMACS47K .264 (6.7) .389 (9.9) .875 (22.2) .024 (.6).068 MMACS68K .264 (6.7) .444 (11.3) .875 (22.2) .024 (.6).100 MMACP1K .303 (7.7) .428 (10.9) 1.062 (27.0) .024 (.6)

1.375” MIN.(35mm)

LMAX.

“d”

TMAX.

W MAX.



FilmCapacitors

CORNELLDUBILIER


Type MMA, Polyester Film Capacitors



360 Vac (800 Vdc) (cont’d).150 MMACP15K .373 (9.5) .498 (12.6) 1.062 (27.0) .032 (.8).220 MMACP22K .454 (11.5) .593 (15.1) 1.125 (28.6) .032 (.8).330 MMACP33K .544 (13.8) .710 (18.0) 1.125 (28.6) .032 (.8).470 MMACP47K .605 (15.4) .756 (19.2) 1.250 (31.7) .040 (1.0).680 MMACP68K .730 (18.5) .881 (22.4) 1.500 (38.1) .040 (1.0)

1.000 MMACW1K .727 (18.5) .893 (22.7) 1.500 (38.1) .040 (1.0)1.500 MMACW1P5K .716 (18.2) .936 (23.8) 1.937 (49.2) .040 (1.0)2.000 MMACW2K .834 (21.2) 1.054 (26.8) 1.937 (49.2) .040 (1.0)

480 Vac (1000 Vdc).010 MMADS1K .185 (4.7) .310 (7.9) .875 (22.2) .020 (.5).015 MMADS15K .226 (5.7) .351 (8.9) .875 (22.2) .024 (.6).022 MMADS22K .273 (6.9) .398 (10.1) .875 (22.2) .024 (.6).033 MMADS33K .336 (8.5) .461 (11.7) .875 (22.2) .024 (.6).047 MMADS47K .295 (7.5) .420 (10.7) 1.062 (27.0) .024 (.6).068 MMADS68K .357 (9.1) .482 (12.2) 1.062 (27.0) .032 (.8).100 MMADP1K .393 (10.0) .603 (15.3) 1.062 (27.0) .032 (.8).150 MMADP15K .493 (12.5) .703 (17.8) 1.125 (28.6) .032 (.8).220 MMADP22K .495 (12.6) .705 (17.9) 1.312 (33.3) .032 (.8).330 MMADP33K .533 (13.5) .743 (18.9) 1.500 (38.1) .032 (.8).470 MMADP47K .663 (16.8) .859 (21.8) 1.500 (38.1) .040 (1.0).680 MMADP68K .722 (18.3) .918 (23.3) 1.750 (44.4) .040 (1.0)

1.000 MMADW1K .794 (20.2) 1.014 (25.7) 1.937 (49.2) .040 (1.0)1.500 MMADW1P5K .909 (23.1) 1.130 (28.7) 2.125 (54.0) .040 (1.0)




Film

Capa

cito

rs

CORNELLDUBILIER


Type MMP, Polyester Film Capacitors

Metallized Low ProfileOval, Axial Leads Circuit Cards

Specifications

Type MMP axial-leaded, metallized polyestercapacitors are ideal when height is at a premium.Non-inductive winding and self-healing capabilitiesprovide stability and long life.



Dielectric Strength: 175% (1 minute)Dissipation Factor: 1% Max. (25°C, 1 kHz)Insulation Resistance: 5,000 M x µF

10,000 M Min.Life Test: 1,000 Hours at 85°C at 125% Rated

VoltagePulse Capability

Body LengthRatedVolts .590 .830-.870 .980-1.060 1.300-1.500 1.850

dV/dt—volts per microsecond, maximum100 20 12 8 6250 28 17 12 8 6400 45 27 15 14600 72 43 28 21 12



100 Vdc (65 Vac).15 MMP1P15K .197 (5.0) .354 (9.0) .670 (17.0) .024 (.6).20 MMP1P22K .236 (6.0) .394 (10.0) .670 (17.0) .024 (.6).33 MMP1P33K .236 (6.0) .433 (11.0) .670 (17.0) .024 (.6).47 MMP1P47K .236 (6.0) .394 (10.0) .906 (23.0) .024 (.6).68 MMP1P68K .256 (6.5) .433 (11.0) .906 (23.0) .024 (.6)

1.00 MMP1W1K .276 (7.0) .492 (12.5) .906 (23.0) .032 (.8)1.50 MMP1W1P5K .276 (7.0) .492 (12.5) 1.063 (27.0) .032 (.8)2.20 MMP1W2P2K .354 (9.0) .630 (16.0) 1.063 (27.0) .032 (.8)3.30 MMP1W3P3K .433 (11.0) .729 (18.5) 1.063 (27.0) .032 (.8)4.70 MMP1W4P7K .354 (9.0) .729 (18.5) 1.378 (35.0) .032 (.8)6.80 MMP1W6P8K .512 (13.0) .906 (23.0) 1.378 (35.0) .032 (.8)

10.00 MMP1W10K .630 (16.0) 1.044 (26.5) 1.378 (35.0) .032 (.8)250 Vdc (160 Vac)

.10 MMP2P1K .217 (5.5) .335 (8.5) .670 (17.0) .024 (.6)

.15 MMP2P15K .217 (5.5) .374 (9.5) .670 (17.0) .024 (.6)

.22 MMP2P22K .197 (5.0) .354 (9.0) .906 (23.0) .024 (.6)

.33 MMP2P33K .217 (5.5) .414 (10.5) .906 (23.0) .024 (.6)

.47 MMP2P47K .276 (7.0) .433 (11.0) .985 (25.0) .032 (.8)


250 Vdc (160 Vac) (cont’d).680 MMP2P68K .256 (6.5) .492 (12.5) 1.103 (28.0) .032 (.8)

1.000 MMP2W1K .295 (7.5) .532 (13.5) 1.103 (28.0) .032 (.8)1.500 MMP2W1P5K .335 (8.5) .591 (15.0) 1.260 (32.0) .032 (.8)2.200 MMP2W2P2K .394 (10.0) .709 (18.0) 1.378 (35.0) .032 (.8)3.300 MMP2W3P3K .492 (12.5) .866 (22.0) 1.457 (37.0) .032 (.8)4.700 MMP2W4P7K .630 (16.0) .985 (25.0) 1.694 (43.0) .032 (.8)6.800 MMP2W6P8K .748 (19.0) 1.063 (27.0) 1.575 (40.0) .032 (.8)

10.000 MMP2W10K .630 (16.0) 1.063 (27.0) 1.930 (49.0) .032 (.8)400 Vdc (200 Vac)

.022 MMP4S22K .197 (5.0) .354 (9.0) .670 (17.0) .024 (.6)

.033 MMP4S33K .236 (6.0) .394 (10.0) .670 (17.0) .024 (.6)

.047 MMP4S47K .236 (6.0) .394 (10.0) .670 (17.0) .024 (.6)

.068 MMP4S68K .256 (6.5) .394 (10.0) .670 (17.0) .024 (.6)

.100 MMP4P1K .256 (6.5) .433 (11.0) .748 (19.0) .024 (.6)

.150 MMP4P15K .256 (6.5) .453 (11.5) .866 (22.0) .024 (.6)

.220 MMP4P22K .295 (7.5) .532 (13.5) .985 (25.0) .024 (.6)

.330 MMP4P33K .315 (8.0) .571 (14.5) 1.063 (27.0) .032 (.8)

.470 MMP4P47K .354 (9.0) .610 (15.5) 1.063 (27.0) .032 (.8)

.680 MMP4P68K .354 (9.0) .630 (16.0) 1.378 (35.0) .032 (.8)

1.50” MIN.(38.1mm)

LMAX.

“d”

TMAX.

W MAX.

Normally Stocked



FilmCapacitors

CORNELLDUBILIER


Type MMP, Polyester Film Capacitors



400 Vdc (200 Vac) (cont’d)1.000 MMP4W1K .414 (10.5) .729 (18.5) 1.378 (35.0) .032 (.8)1.500 MMP4W1P5K .492 (12.5) .827 (21.0) 1.378 (35.0) .032 (.8)2.200 MMP4W2P2K .551 (14.0) .906 (23.0) 1.575 (40.0) .032 (.8)3.300 MMP4W3P3K .670 (17.0) 1.024 (26.0) 1.575 (40.0) .032 (.8)4.700 MMP4W4P7K .827 (21.0) 1.182 (30.0) 1.575 (40.0) .032 (.8)

630 Vdc (250 Vac).010 MMP6S1K .197 (5.0) .354 (9.0) .670 (17.0) .024 (.6).015 MMP6S15K .236 (6.0) .394 (10.0) .670 (17.0) .024 (.6).022 MMP6S22K .236 (6.0) .394 (10.0) .670 (17.0) .024 (.6).033 MMP6S33K .236 (6.0) .394 (10.0) .670 (17.0) .024 (.6).047 MMP6S47K .236 (6.0) .394 (10.0) .906 (23.0) .024 (.6).068 MMP6S68K .276 (7.0) .433 (11.0) .906 (23.0) .024 (.6).100 MMP6P1K .315 (8.0) .512 (13.0) .906 (23.0) .032 (.8).150 MMP6P15K .394 (10.0) .591 (15.0) .906 (23.0) .032 (.8).220 MMP6P22K .354 (9.0) .591 (15.0) 1.063 (27.0) .032 (.8).330 MMP6P33K .394 (10.0) .670 (17.0) 1.063 (27.0) .032 (.8).470 MMP6P47K .473 (12.0) .689 (17.5) 1.378 (35.0) .032 (.8).680 MMP6P68K .433 (11.0) .748 (19.0) 1.378 (35.0) .032 (.8)

1.000 MMP6W1K .512 (13.0) .866 (22.0) 1.536 (39.0) .032 (.8)1.500 MMP6W1P5K .670 (17.0) 1.063 (27.0) 1.536 (39.0) .032 (.8)2.200 MMP6W2P2K .748 (19.0) 1.103 (28.0) 1.930 (49.0) .032 (.8)

Normally Stocked




Film

Capa

cito

rs

CORNELLDUBILIER


Type MMWA, Polyester Film Capacitors

Metallized High CapacitanceAxial Leads High Voltage

Specifications

Type MMWA axial-leaded, metallized polyester filmcapacitors incorporate compact, non-inductiveextended foil windings with epoxy end seals to offerexcellent moisture resistance and capacitancestability over the operating temperature range.Metallized polyester provides self-healing charac-teristics that help prevent permanent shorting dueto high voltage transient.

Voltage Range: 50-1,000 Vdc (35-480 Vac)Capacitance Range: .01-10 µFCapacitance Tolerance: ±10% (K) standard

±5% (J) optional*Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 125°C

Operating Temperature Range: -55°C to 125°C*Dielectric Strength: 200% (1 minute)Dissipation Factor: .75% Max. (25°C, 1 kHz)Insulation Resistance: 10,000 M x µF




50 Vdc (35 Vac).100 MMWA05P1K .220 (5.6) .562 (14.3) .020 (.5).150 MMWA05P15K .210 (5.3) .687 (17.4) .020 (.5).220 MMWA05P22K .240 (6.1) .687 (17.4) .020 (.5).330 MMWA05P33K .280 (7.1) .687 (17.4) .024 (.6).470 MMWA05P47K .320 (8.1) .687 (17.4) .024 (.6).680 MMWA05P68K .290 (7.4) 1.000 (25.4) .024 (.6)

1.000 MMWA05W1K .335 (8.5) 1.000 (25.4) .024 (.6)1.500 MMWA05W1P5K .355 (9.0) 1.250 (31.7) .024 (.6)2.000 MMWA05W2K .400 (10.2) 1.250 (31.7) .024 (.6)3.000 MMWA05W3K .475 (12.1) 1.250 (31.7) .024 (.6)4.000 MMWA05W4K .505 (12.8) 1.375 (34.9) .024 (.6)5.000 MMWA05W5K .525 (13.3) 1.500 (38.1) .024 (.6)6.000 MMWA05W6K .585 (14.9) 1.500 (38.1) .032 (.8)7.000 MMWA05W7K .625 (15.9) 1.500 (38.1) .032 (.8)8.000 MMWA05W8K .669 (17.0) 1.500 (38.1) .040 (1.0)9.000 MMWA05W9K .700 (17.8) 1.500 (38.1) .040 (1.0)

10.000 MMWA05W10K .670 (17.0) 1.750 (44.4) .040 (1.0)


100 Vdc (65 Vac).010 MMWA1S1K .197 (5.0) .562 (14.3) .020 (.5).015 MMWA1S15K .197 (5.0) .562 (14.3) .020 (.5).022 MMWA1S22K .197 (5.0) .562 (14.3) .020 (.5).033 MMWA1S33K .197 (5.0) .562 (14.3) .020 (.5).047 MMWA1S47K .217 (5.5) .562 (14.3) .020 (.5).068 MMWA1S68K .217 (5.5) .562 (14.3) .020 (.5).100 MMWA1P1K .236 (6.0) .562 (14.3) .020 (.5).150 MMWA1P15K .236 (6.0) .687 (17.4) .020 (.5).220 MMWA1P22K .256 (6.5) .687 (17.4) .020 (.5).330 MMWA1P33K .295 (7.5) .687 (17.4) .024 (.6).470 MMWA1P47K .320 (8.1) .687 (17.4) .024 (.6).680 MMWA1P68K .320 (8.1) 1.000 (25.4) .024 (.6)

1.000 MMWA1W1K .374 (9.5) 1.000 (25.4) .024 (.6)1.500 MMWA1W1P5K .374 (9.5) 1.250 (31.7) .024 (.6)2.000 MMWA1W2K .400 (10.2) 1.250 (31.7) .024 (.6)3.000 MMWA1W3K .475 (12.1) 1.250 (31.7) .024 (.6)4.000 MMWA1W4K .505 (12.8) 1.375 (34.9) .032 (.8)


RatedVolts .562 .687-.750 1.000-1.250 ≥1.500

dV/dt—volts per microsecond, maximum50/100 36 20 9 4

200 52 29 14 6400 82 46 22 10600 69 32 14

1000 220 120 50

1.50” MIN.(38.1mm)

L MAX.1.50” MIN.(38.1mm)

MAX.D

dTINNED COPPER-CLAD STEEL LEADS

Normally Stocked



FilmCapacitors

CORNELLDUBILIER


Type MMWA, Polyester Film Capacitors

Normally Stocked Cap. Catalog D L d


400 Vdc (200 Vac) (cont’d).470 MMWA4P47K .433 (11.0) 1.187 (30.1) .024 (.6).680 MMWA4P68K .433 (11.0) 1.500 (38.1) .024 (.6)

1.000 MMWA4W1K .470 (11.9) 1.750 (44.4) .024 (.6)1.500 MMWA4W1P5K .570 (14.5) 1.750 (44.4) .032 (.8)2.000 MMWA4W2K .669 (17.0) 1.750 (44.4) .040 (1.0)3.000 MMWA4W3K .695 (17.6) 2.125 (54.0) .040 (1.0)3.500 MMWA4W3P5K .745 (18.9) 2.125 (54.0) .040 (1.0)4.000 MMWA4W4K .790 (20.1) 2.125 (54.0) .040 (1.0)5.000 MMWA4W5K .870 (22.1) 2.125 (54.0) .040 (1.0)

600/630 Vdc (250 Vac).010 MMWA6S1K .217 (5.5) .687 (17.4) .020 (.5).015 MMWA6S15K .236 (6.0) .687 (17.4) .020 (.5).022 MMWA6S22K .276 (7.0) .750 (19.0) .020 (.5).033 MMWA6S33K .270 (6.9) .750 (19.0) .024 (.6).047 MMWA6S47K .305 (7.7) .750 (19.0) .024 (.6).068 MMWA6S68K .335 (8.5) 1.000 (25.4) .024 (.6).100 MMWA6P1K .374 (9.5) 1.000 (25.4) .024 (.6).150 MMWA6P15K .413 (10.5) 1.187 (30.1) .024 (.6).220 MMWA6P22K .430 (10.9) 1.250 (31.7) .024 (.6).330 MMWA6P33K .480 (12.2) 1.250 (31.7) .024 (.6).470 MMWA6P47K .470 (11.9) 1.750 (44.4) .024 (.6).680 MMWA6P68K .570 (14.5) 1.750 (44.4) .032 (.8)

1.000 MMWA6W1K .685 (17.4) 1.750 (44.4) .040 (1.0)2.000 MMWA6W2K .805 (20.4) 2.250 (57.1) .040 (1.0)3.000 MMWA6W3K .945 (24.0) 2.250 (57.1) .040 (1.0)

1,000 Vdc (480 Vac).010 MMWA10S1K .240 (6.1) .875 (22.2) .020 (.5).015 MMWA10S15K .275 (7.0) .875 (22.2) .024 (.6).022 MMWA10S22K .320 (8.1) .875 (22.2) .024 (.6).033 MMWA10S33K .380 (9.6) .875 (22.2) .024 (.6).047 MMWA10S47K .335 (8.5) 1.062 (27.0) .024 (.6).068 MMWA10S68K .410 (10.4) 1.125 (28.6) .024 (.6).100 MMWA10P1K .485 (12.3) 1.125 (28.6) .024 (.6).150 MMWA10P15K .595 (15.1) 1.125 (28.6) .032 (.8).220 MMWA10P22K .605 (15.4) 1.312 (33.3) .032 (.8).330 MMWA10P33K .640 (16.3) 1.500 (38.1) .032 (.8).470 MMWA10P47K .750 (19.0) 1.500 (38.1) .040 (1.0).680 MMWA10P68K .810 (20.6) 1.750 (44.4) .040 (1.0)

1.000 MMWA10W1K .880 (22.3) 1.937 (49.2) .040 (1.0)


100 Vdc (65 Vac) (cont’d)5.000 MMWA1W5K .525 (13.3) 1.500 (38.1) .032 (.8)6.000 MMWA1W6K .585 (14.9) 1.500 (38.1) .032 (.8)7.000 MMWA1W7K .625 (15.9) 1.500 (38.1) .032 (.8)8.000 MMWA1W8K .669 (17.0) 1.500 (38.1) .040 (1.0)9.000 MMWA1W9K .700 (17.8) 1.500 (38.1) .040 (1.0)

10.000 MMWA1W10K .768 (19.5) 1.750 (44.4) .040 (1.0)200/250 Vdc (125 Vac)

.010 MMWA2S1K .197 (5.0) .562 (14.3) .020 (.5)

.015 MMWA2S15K .197 (5.0) .562 (14.3) .020 (.5)

.022 MMWA2S22K .197 (5.0) .562 (14.3) .020 (.5)

.033 MMWA2S33K .197 (5.0) .562 (14.3) .020 (.5)

.047 MMWA2S47K .217 (5.5) .562 (14.3) .020 (.5)

.068 MMWA2S68K .200 (5.1) .687 (17.4) .020 (.5)

.100 MMWA2P1K .240 (6.1) .687 (17.4) .020 (.5)

.150 MMWA2P15K .276 (7.0) .687 (17.4) .024 (.6)

.220 MMWA2P22K .310 (7.9) .687 (17.4) .024 (.6)

.330 MMWA2P33K .365 (9.3) .728 (18.5) .024 (.6)

.470 MMWA2P47K .374 (9.5) 1.000 (25.4) .024 (.6)

.680 MMWA2P68K .365 (9.3) 1.000 (25.4) .024 (.6)1.000 MMWA2W1K .430 (10.9) 1.062 (27.0) .024 (.6)1.500 MMWA2W1P5K .465 (11.8) 1.250 (31.7) .024 (.6)2.000 MMWA2W2K .525 (13.3) 1.250 (31.7) .032 (.8)3.000 MMWA2W3K .555 (14.1) 1.500 (38.1) .032 (.8)3.500 MMWA2W3P5K .610 (15.5) 1.500 (38.1) .032 (.8)4.000 MMWA2W4K .590 (15.0) 1.750 (44.4) .032 (.8)5.000 MMWA2W5K .669 (17.0) 1.750 (44.4) .040 (1.0)6.000 MMWA2W6K .705 (17.9) 1.750 (44.4) .040 (1.0)

400 Vdc (200 Vac).010 MMWA4S1K .217 (5.5) .562 (14.3) .020 (.5).015 MMWA4S15K .217 (5.5) .562 (14.3) .020 (.5).022 MMWA4S22K .236 (6.0) .562 (14.3) .020 (.5).033 MMWA4S33K .220 (5.6) .687 (17.4) .020 (.5).047 MMWA4S47K .276 (7.0) .687 (17.4) .020 (.5).068 MMWA4S68K .280 (7.1) .687 (17.4) .024 (.6).100 MMWA4P1K .320 (8.1) .687 (17.4) .024 (.6).150 MMWA4P15K .290 (7.4) 1.000 (25.4) .024 (.6).220 MMWA4P22K .335 (8.5) 1.000 (25.4) .024 (.6).330 MMWA4P33K .394 (10.0) 1.187 (30.1) .024 (.0)





Film

Capa

cito

rs

CORNELLDUBILIER


Type DLR, Polyester Film Capacitors

Film/Foil Compact SizeRadial Leads High Value, Inductive

Specifications

Radial leaded, polyester film/foil, multiple dippedwith epoxy resin, Type DLR boasts superior heatand humidity resistance, stable capacitance,exceptionally high value, and low cost from auto-mated, single-point attachment of leads. But theresulting inductance makes Type DLR best in DCand low-frequency applications.

Voltage Range: 100 Vdc (63 Vac)Capacitance Range: .001-.68 µFCapacitance Tolerance: ±10% (K) standard

±5% (J) optionalOperating Temperature Range: -55°C to 125°C*Pulse Capability: 500 V/µs Max.Dielectric Strength: 250% (1 minute)Dissipation Factor: 1% Max. (25°C, 1kHz)*Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 125°C

Insulation Resistance: 30,000 M Min.Life Test: 1000 Hours at 85°C at

125% Rated Voltage

Ratings and DimensionsT H L S d

Cap. Catalog Maximum Maximum Maximum ±.04 (±1.0) ±.002 (±.05)µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

100 Vdc.0010 DLR1D1K .138 (3.5) .414 (10.5) .236 (6.0) .138 (3.5) .020 (.5).0015 DLR1D15K .138 (3.5) .414 (10.5) .236 (6.0) .138 (3.5) .020 (.5).0022 DLR1D22K .138 (3.5) .414 (10.5) .236 (6.0) .158 (4.0) .020 (.5).0033 DLR1D33K .138 (3.5) .414 (10.5) .236 (6.0) .158 (4.0) .020 (.5).0047 DLR1D47K .138 (3.5) .414 (10.5) .256 (6.5) .158 (4.0) .020 (.5).0068 DLR1D68K .138 (3.5) .414 (10.5) .256 (6.5) .158 (4.0) .020 (.5).0100 DLR1S1K .158 (4.0) .414 (10.5) .256 (6.5) .177 (4.5) .020 (.5).0150 DLR1S15K .158 (4.0) .414 (10.5) .256 (6.5) .177 (4.5) .020 (.5).0220 DLR1S22K .158 (4.0) .414 (10.5) .276 (7.0) .197 (5.0) .020 (.5).0330 DLR1S33K .177 (4.5) .453 (11.5) .315 (8.0) .236 (6.0) .020 (.5).0470 DLR1S47K .197 (5.0) .453 (11.5) .374 (9.5) .236 (6.0) .020 (.5).0680 DLR1S68K .236 (6.0) .453 (11.5) .414 (10.5) .236 (6.0) .020 (.5).1000 DLR1P1K .256 (6.5) .453 (11.5) .473 (12.0) .256 (6.5) .020 (.5).1500 DLR1P15K .315 (8.0) .551 (14.0) .591 (15.0) .276 (7.0) .020 (.5).2200 DLR1P22K .335 (8.5) .551 (14.0) .618 (15.7) .295 (7.5) .020 (.5).3300 DLR1P33K .374 (9.5) .768 (19.5) .650 (16.5) .335 (8.5) .020 (.5).4700 DLR1P47K .414 (10.5) .807 (20.5) .768 (19.5) .335 (8.5) .020 (.5)

.0591.5 MAX.

L

H

S

MAXIMUM

T

d

.78720.0 MIN.

Normally Stocked



FilmCapacitors

CORNELLDUBILIER


Type DMT, Polyester Film Capacitors

Film/Foil General Purpose, High Peak Currents,Radial Leads High Insulation Resistance

Specifications

Type DMT radial-leaded, polyester film/foil non-inductively wound film capacitors feature compactsize and moisture-resistive epoxy coating. Highinsulation resistance and low dissipation factor,Type DMT is an ideal choice for most applications,especially with high peak currents.



Dielectric Strength: 250% (1 minute)Dissipation Factor: 1% Max. (25°C, 1kHz)Insulation Resistance: 30,000 M x µF



RatedVolts .437 .569 .682-.694 .820-.945 1.069-1.194 ≥1.319

dV/dt—volts per microsecond, maximum100 6400 3200 2100 1600 1050 800200 6400 5000 3000 2100 1360400 14400 7200 4100 2900 2100600 15000 7400 4000 3000


Cap. Catalog T H L S dµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

100 Vdc (65 Vac).0010 DMT1D1K .197 (5.0) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0015 DMT1D15K .200 (5.1) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0022 DMT1D22K .210 (5.3) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0033 DMT1D33K .210 (5.3) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0047 DMT1D47K .210 (5.3) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0068 DMT1D68K .210 (5.3) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0100 DMT1S1K .220 (5.6) .354 (9.0) .512 (13.0) .394 (10.0) .024 (.6).0150 DMT1S15K .220 (5.6) .370 (9.4) .512 (13.0) .394 (10.0) .024 (.6).0220 DMT1S22K .256 (6.5) .390 (9.9) .512 (13.0) .394 (10.0) .024 (.6).0330 DMT1S33K .250 (6.3) .350 (8.9) .560 (14.2) .400 (10.2) .032 (.8)


100 Vdc (65 Vac) (cont’d).0470 DMT1S47K .260 (6.6) .433 (11.0) .560 (14.2) .420 (10.7) .032 (.8).0680 DMT1S68K .275 (7.0) .460 (11.7) .560 (14.2) .420 (10.7) .032 (.8).1000 DMT1P1K .290 (7.4) .445 (11.3) .682 (17.3) .545 (13.8) .032 (.8).1500 DMT1P15K .350 (8.9) .490 (12.4) .682 (17.3) .545 (13.8) .032 (.8).2200 DMT1P22K .360 (9.1) .520 (13.2) .820 (20.8) .670 (17.0) .032 (.8).3300 DMT1P33K .390 (9.9) .560 (14.2) .942 (23.9) .795 (20.2) .032 (.8).4700 DMT1P47K .420 (10.7) .600 (15.2) 1.080 (27.4) .920 (23.4) .032 (.8).5000 DMT1P5K .530 (13.5) .690 (17.5) 1.102 (28.0) .920 (23.4) .032 (.8).6800 DMT1P68K .480 (12.2) .690 (17.5) 1.140 (28.9) .985 (25.0) .032 (.8)

1.0000 DMT1W1K .520 (13.2) .730 (18.5) 1.330 (33.8) 1.170 (29.7) .032 (.8)

TMAX.

TINNED COPPER-CLADSTEEL LEADS

LMAX.

S±.050

.984 MIN.(25)

HMAX.

.0937 MAX.

d

Normally Stocked





Film

Capa

cito

rs

CORNELLDUBILIER


Type DMT, Polyester Film Capacitors



200/250 Vdc (125 Vac).0010 DMT2D1K .217 (5.5) .374 (9.5) .512 (13.0) .394 (10.0) .024 (.6).0015 DMT2D15K .217 (5.5) .374 (9.5) .512 (13.0) .394 (10.0) .024 (.6).0022 DMT2D22K .217 (5.5) .374 (9.5) .512 (13.0) .394 (10.0) .024 (.6).0033 DMT2D33K .217 (5.5) .374 (9.5) .512 (13.0) .394 (10.0) .024 (.6).0047 DMT2D47K .236 (6.0) .394 (10.0) .512 (13.0) .394 (10.0) .024 (.6).0068 DMT2D68K .236 (6.0) .394 (10.0) .512 (13.0) .394 (10.0) .024 (.6).0100 DMT2S1K .236 (6.0) .394 (10.0) .512 (13.0) .394 (10.0) .024 (.6).0150 DMT2S15K .236 (6.0) .395 (10.0) .512 (13.0) .400 (10.2) .024 (.6).0220 DMT2S22K .275 (7.0) .433 (11.0) .512 (13.0) .420 (10.7) .024 (.6).0330 DMT2S33K .295 (7.5) .453 (11.0) .694 (17.6) .545 (13.8) .024 (.6).0470 DMT2S47K .295 (7.5) .472 (12.0) .694 (17.6) .545 (13.8) .024 (.6).0680 DMT2S68K .335 (8.5) .512 (13.0) .694 (17.6) .545 (13.8) .032 (.8).1000 DMT2P1K .354 (9.0) .512 (13.0) .820 (20.8) .670 (17.0) .032 (.8).1500 DMT2P15K .394 (10.0) .571 (14.5) .820 (20.8) .670 (17.0) .032 (.8).2200 DMT2P22K .413 (10.5) .630 (16.0) .945 (24.0) .795 (20.2) .032 (.8).3300 DMT2P33K .492 (12.5) .689 (17.5) .945 (24.0) .795 (20.2) .032 (.8).4700 DMT2P47K .531 (13.5) .728 (18.5) 1.110 (28.2) .920 (23.4) .032 (.8).6800 DMT2P68K .630 (16.0) .827 (21.0) 1.132 (28.7) .984 (25.0) .032 (.8)

400 Vdc (200 Vac).0010 DMT4D1K .197 (5.0) .354 (9.0) .569 (14.4) .400 (10.2) .024 (.6).0015 DMT4D15K .221 (5.6) .356 (9.0) .569 (14.4) .400 (10.2) .024 (.6).0022 DMT4D22K .221 (5.6) .356 (9.0) .569 (14.4) .400 (10.2) .024 (.6).0033 DMT4D33K .221 (5.6) .374 (9.5) .569 (14.4) .400 (10.2) .024 (.6).0047 DMT4D47K .241 (6.1) .394 (10.0) .569 (14.4) .400 (10.2) .024 (.6).0068 DMT4D68K .286 (7.3) .411 (10.4) .569 (14.4) .400 (10.2) .024 (.6).0100 DMT4S1K .331 (8.4) .456 (11.6) .569 (14.4) .400 (10.2) .032 (.8).0150 DMT4S15K .368 (9.3) .534 (13.6) .569 (14.4) .400 (10.2) .032 (.8)


400 Vdc (200 Vac) (cont’d).0220 DMT4S22K .328 (8.3) .479 (12.2) .694 (17.6) .545 (13.8) .032 (.8).0330 DMT4S33K .388 (9.9) .539 (13.7) .694 (17.6) .545 (13.8) .032 (.8).0470 DMT4S47K .338 (8.6) .534 (13.6) .882 (22.4) .733 (18.6) .032 (.8).0680 DMT4S68K .397 (10.1) .593 (15.1) .882 (22.4) .733 (18.6) .032 (.8).1000 DMT4P1K .472 (12.0) .668 (17.0) .882 (22.4) .733 (18.6) .032 (.8).1500 DMT4P15K .408 (10.4) .810 (20.6) 1.069 (27.1) .920 (23.4) .032 (.8).2200 DMT4P22K .418 (10.6) .811 (20.6) 1.319 (33.5) 1.170 (29.7) .032 (.8).3300 DMT4P33K .415 (10.5) .844 (21.4) 1.569 (39.8) 1.420 (36.1) .032 (.8).4700 DMT4P47K .541 (13.7) .934 (23.7) 1.569 (39.8) 1.420 (36.1) .032 (.8)

600/630 Vdc (250 Vac).0010 DMT6D1K .218 (5.5) .326 (8.3) .694 (17.6) .545 (13.8) .024 (.6).0015 DMT6D15K .221 (5.6) .329 (8.4) .694 (17.6) .545 (13.8) .024 (.6).0022 DMT6D22K .251 (6.4) .359 (9.1) .694 (17.6) .545 (13.8) .024 (.6).0033 DMT6D33K .251 (6.4) .376 (9.5) .694 (17.6) .545 (13.8) .032 (.8).0047 DMT6D47K .284 (7.2) .409 (10.4) .694 (17.6) .545 (13.8) .032 (.8).0068 DMT6D68K .313 (7.9) .464 (11.8) .694 (17.6) .545 (13.8) .032 (.8).0100 DMT6S1K .364 (9.2) .515 (13.1) .694 (17.6) .545 (13.8) .032 (.8).0150 DMT6S15K .342 (8.7) .508 (12.9) .820 (20.8) .670 (17.0) .032 (.8).0220 DMT6S22K .402 (10.2) .568 (14.4) .820 (20.8) .670 (17.0) .032 (.8).0330 DMT6S33K .443 (11.2) .609 (15.5) .882 (22.4) .733 (18.6) .032 (.8).0470 DMT6S47K .519 (13.2) .685 (17.4) .882 (22.4) .733 (18.6) .032 (.8).0680 DMT6S68K .453 (11.5) .649 (16.5) 1.194 (30.3) 1.045 (26.5) .032 (.8).1000 DMTP61K .541 (13.7) .737 (18.7) 1.194 (30.3) 1.045 (26.5) .032 (.8).1500 DMT6P15K .656 (16.7) .926 (23.5) 1.194 (30.3) 1.045 (26.5) .032 (.8).2200 DMT6P22K .630 (16.0) 1.024 (26.0) 1.444 (36.7) 1.295 (32.9) .032 (.8).3300 DMT6P33K .650 (16.5) 1.010 (25.6) 1.819 (46.2) 1.670 (42.4) .032 (.8).4700 DMT6P47K .739 (18.8) 1.132 (28.7) 1.819 (46.2) 1.670 (42.4) .032 (.8)

Normally Stocked


Type DSF Polyester CapacitorsFilm

Capacitors

CORNELLDUBILIER


Type DSF film capacitors are made with stackedmetallized polyester, resulting in high volumetricefficiency and a very economical solution for generalpurpose DC applications. Ideally suited for blocking,by-pass, coupling, decoupling, and filtering circuits.Specifically designed for applications where highdensity insertion of components is required. Ammobox style or reel taping available.

Stacked MetallizedRadial Leads Subminiature Size

Voltage Range: 50-100 Vdc (63 Vdc Optional)Capacitance Range: .010-2.2 µFCapacitance Tolerance: ± 5% (J) standardOperating Temperature Range: -40 to + 85°C

Dielectric Strength: Rated Vdc x 150 %, 60 sec.Dissipation factor: 1% max (25°C, 1 kHz)Insulation resistance: C≤0.33µF : 3000MΩ min.

C>0.33µF : 1000MΩµF min.Life Test: 1000 h @ 85°C, 125% rated voltageFull rated voltage at 85°C-Derate linearly to 50% - rated voltage at 105°C

Pulse Capability Body Length (mm)

Rated Volts 7.3, 7.5 10.2

dV/dt volts per microsecond, max.

50 32 - 37 12

100 55 43

Cap. Catalog T H L S Cap. Catalog T H L SµF Number Inches(mm) Inches(mm) Inches(mm) Inches(mm) µF Number Inches(mm) Inches(mm) Inches(mm) Inches(mm)

50 Vdc (40 Vac) 50 Vdc (40 Vac) (cont’d)0.010 DSF050J103 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 1.500 DSF050J155 0.283 (7.2) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

0.012 DSF050J123 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 1.800 DSF050J185 0.283 (7.2) 0.472 (12.0) 0.402 (10.2) 0.295 (7.5)

0.015 DSF050J153 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 2.200 DSF050J225 0.311 (7.9) 0.472 (12.0) 0.402 (10.2) 0.295 (7.5)

0.018 DSF050J183 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 100 Vdc (63 Vac)0.022 DSF050J223 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.010 DSF100J103 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.027 DSF050J273 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.012 DSF100J123 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.033 DSF050J333 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.015 DSF100J153 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.039 DSF050J393 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.018 DSF100J183 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.047 DSF050J473 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.022 DSF100J223 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.056 DSF050J563 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.027 DSF100J273 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.068 DSF050J683 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.033 DSF100J333 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.082 DSF050J823 0.142 (3.6) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.039 DSF100J393 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.100 DSF050J104 0.157 (4.0) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.047 DSF100J473 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.120 DSF050J124 0.157 (4.0) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.056 DSF100J563 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.150 DSF050J154 0.173 (4.4) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.068 DSF100J683 0.157 (4.0) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.180 DSF050J184 0.177 (4.5) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.082 DSF100J823 0.161 (4.1) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.220 DSF050J224 0.189 (4.8) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.100 DSF100J104 0.177 (4.5) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.270 DSF050J274 0.181 (4.6) 0.276 (7.0) 0.287 (7.3) 0.197 (5.0) 0.120 DSF100J124 0.130 (3.3) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.330 DSF050J334 0.205 (5.2) 0.276 (7.0) 0.287 (7.3) 0.197 (5.0) 0.150 DSF100J154 0.130 (3.3) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.390 DSF050J394 0.224 (5.7) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.180 DSF100J184 0.142 (3.6) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.470 DSF050J474 0.236 (6.0) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.220 DSF100J224 0.157 (4.0) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.560 DSF050J564 0.228 (5.8) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.270 DSF100J274 0.165 (4.2) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.680 DSF050J684 0.256 (6.5) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.330 DSF100J334 0.189 (4.8) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

0.820 DSF050J824 0.268 (6.8) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.390 DSF100J394 0.217 (5.5) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

1.000 DSF050J105 0.315 (8.0) 0.433 (11.0) 0.287 (7.3) 0.197 (5.0) 0.470 DSF100J474 0.268 (6.8) 0.413 (10.5) 0.402 (10.2) 0.295 (7.5)

1.200 DSF050J125 0.256 (6.5) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

L S

≥10 7.5

Lead Spacing

<10 5.0

Specifications


1.0

S±0.8

L max

H m

ax20

min

T max

0.5 ±.05mm

Full rated voltage at 85°C-Derate linearly to 50% - rated voltage at 125°C




Type DSF Polyester CapacitorsFi

lmCa

paci

tors

CORNELLDUBILIER


050 = 50 Vdc100 = 100 Vdc

VoltageCode

CapacitanceTolerance

J = ±5%

NominalCapacitance

(First two digits are significantfigures. Last digit is multiplier

to give cap in pF)

e.g. 223 = 22 X 103 pF = .022 µF 104 = 10 X 104 pF = .100 µF 155 = 15 X 105 pF = 1.50 µF

DippedStacked

FilmType

DSF 050 J 223 C

Ammo Pack Options

Part Number System for DSF Series

Crimped Lead Ammo Pack Option (CA) Straight Lead Ammo Pack Option (TA)

Crimp style depends on capacitor length.Bulk Cut & Crimp Styles

Bulk and AmmoPackaging Options

Blank = Straight lead, BulkC = Crimped, BulkCA = Crimped Lead, Ammo PackTA = Straight Lead, Ammo Pack

Tape & Reel packaging available.Contact us for detailed specs.

L ≤10.0 mm L >10.0 mm

PACKAGE QUANTITY FOR AMMO PACKCRIMPED LEAD OPTION (CA) & (CR)

WVDC Capacitance Range Quantity50 0.01 - 0.12 2000

0.15 - 2.2 1000

100 0.01 - 0.068 2000

0.082 - 0.1 1000

0.12 - 0.22 2000

0.27 - 0.47 1000

AMMO PACK TAPING SPECIFICATIONSDimensions Dimensions Tol.for Crimped for Straight (mm)Option (CA) Lead Option (TA)

Lead Spacing (F) 5.0 5.0 +.8/-.2Capacitor Pitch (P) 12.7 12.7 ±.1Feed Hole Pitch(Po) 12.7 12.7 ±.2Carrier Width (W) 18.0 18.0 ±.5Feed Hole Position(W1) 9.0 9.0 ±.5Height of Seating Plane(H1) 20.0 20.0 ±.5Lead Wire Clinch Height (Ho) 16.0 --- ±.5Feed Hole Diameter (Do) 4.0 4.0 ±.2Case Top to FeedHole (H2) Max. 20.5 + Hmax 20.5 + Hmax Max.

PACKAGE QUANTITY FOR AMMO PACKSTRAIGHT LEAD OPTION (TA) & (TR)

WVDC Capacitance Range Quantity

500.01 - 0.12 20000.15 to 1.0 1000

1000.01 - 0.068 20000.082 - 0.1 1000

WVDC H3 max. (mm)

50 H+4.5

100 H+5.0


Type DME, Polyester Film CapacitorsFilm

Capacitors

CORNELLDUBILIER


Metallized DC ApplicationsRadial Leads Miniature Size

Specifications

Type DME radial-leaded, mini-dipped capacitorsdeliver virtually the performance of other capacitorswhich have cases that are twice as big. Improvementsin film technology permit the use of thinner dielectricand make Type DME the choice for all but highercurrent AC applications where the larger size maybe an advantage. Type DME self heals shortscaused by overvoltage transients. For small sizeand low cost, Type DME is tops.




9,000 M Min.Life Test: 1,000 Hours at 85°C at 125% Rated Voltage


RatedVolts .307 .406 .492-.610 .728-.827 1.024 1.220

dV/dt—volts per microsecond, maximum100 52 25 16 10 6250 31 20 12 7 6400 46 30 17 11 9630 101 66 33 19 15

1000 93 104 70


Cap. Catalog T Max. H Max. L Max. S ±.04 (±1.0) dµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

100 Vdc (65 Vac).56 DME1P56K .217 (5.5) .429 (10.9) .492 (12.5) .394 (10.0) .024 (.6).68 DME1P68K .236 (6.0) .469 (11.9) .492 (12.5) .394 (10.0) .024 (.6).82 DME1P82K .256 (6.5) .531 (13.5) .492 (12.5) .394 (10.0) .024 (.6)

1.00 DME1W1K .276 (7.0) .551 (14.0) .492 (12.5) .394 (10.0) .024 (.6)1.20 DME1W1P2K .217 (5.5) .504 (12.8) .728 (18.5) .591 (15.0) .024 (.6)1.50 DME1W1P5K .256 (6.5) .528 (13.4) .728 (18.5) .591 (15.0) .032 (.8)1.80 DME1W1P8K .256 (6.5) .571 (14.5) .728 (18.5) .591 (15.0) .032 (.8)2.20 DME1W2P2K .295 (7.5) .610 (15.5) .728 (18.5) .591 (15.0) .032 (.8)2.70 DME1W2P7K .315 (8.0) .630 (16.0) .728 (18.5) .591 (15.0) .032 (.8)3.30 DME1W3P3K .354 (9.0) .650 (16.5) .728 (18.5) .591 (15.0) .032 (.8)3.90 DME1W3P9K .276 (7.0) .646 (16.4) 1.024 (26.0) .886 (22.5) .032 (.8)4.70 DME1W4P7K .315 (8.0) .669 (17.0) 1.024 (26.0) .886 (22.5) .032 (.8)5.60 DME1W5P6K .354 (9.0) .689 (17.5) 1.024 (26.0) .886 (22.5) .032 (.8)6.80 DME1W6P8K .374 (9.5) .728 (18.5) 1.024 (26.0) .886 (22.5) .032 (.8)8.20 DME1W8P2K .394 (10.0) .787 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8)

10.00 DME1W10K .453 (11.5) .827 (21.0) 1.024 (26.0) .886 (22.5) .032 (.8)

.06(1.5) MAX.

L

H

S

T

d

.984(25) MIN.

Normally Stocked





Type DME, Polyester Film CapacitorsFi

lmCa

paci

tors

CORNELLDUBILIER



µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

250 Vdc (160 Vac).010 DME2S1K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).012 DME2S12K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).015 DME2S15K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).018 DME2S18K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).022 DME2S22K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).027 DME2S27K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).033 DME2S33K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).039 DME2S39K .173 (4.4) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).047 DME2S47K .177 (4.5) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6).056 DME2S56K .189 (4.8) .311 (7.9) .406 (10.3) .295 (7.5) .024 (.6).068 DME2S68K .189 (4.8) .311 (7.9) .406 (10.3) .295 (7.5) .024 (.6).082 DME2S82K .197 (5.0) .315 (8.0) .406 (10.3) .295 (7.5) .024 (.6).100 DME2P1K .228 (5.8) .346 (8.8) .406 (10.3) .295 (7.5) .024 (.6).120 DME2P12K .236 (6.0) .354 (9.0) .406 (10.3) .295 (7.5) .024 (.6).150 DME2P15K .236 (6.0) .425 (10.8) .406 (10.3) .295 (7.5) .024 (.6).180 DME2P18K .197 (5.0) .413 (10.5) .492 (12.5) .394 (10.0) .024 (.6).220 DME2P22K .236 (6.0) .413 (10.5) .492 (12.5) .394 (10.0) .024 (.6).270 DME2P27K .236 (6.0) .453 (11.5) .492 (12.5) .394 (10.0) .024 (.6).330 DME2P33K .276 (7.0) .472 (12.0) .492 (12.5) .394 (10.0) .024 (.6).390 DME2P39K .193 (4.9) .472 (12.0) .728 (18.5) .591 (15.0) .024 (.6).470 DME2P47K .236 (6.0) .492 (12.5) .728 (18.5) .591 (15.0) .024 (.6).560 DME2P56K .236 (6.0) .512 (13.0) .728 (18.5) .591 (15.0) .024 (.6).680 DME2P68K .256 (6.5) .531 (13.5) .728 (18.5) .591 (15.0) .032 (.8).820 DME2P82K .276 (7.0) .590 (15.0) .728 (18.5) .591 (15.0) .032 (.8)

1.000 DME2W1K .315 (8.0) .610 (15.5) .728 (18.5) .591 (15.0) .032 (.8)1.200 DME2W1P2K .315 (8.0) .626 (15.9) .728 (18.5) .591 (15.0) .032 (.8)1.500 DME2W1P5K .374 (9.5) .689 (17.5) .728 (18.5) .591 (15.0) .032 (.8)1.800 DME2W1P8K .295 (7.5) .610 (15.5) 1.024 (26.0) .886 (22.5) .032 (.8)2.200 DME2W2P2K .354 (9.0) .669 (17.0) 1.024 (26.0) .886 (22.5) .032 (.8)2.700 DME2W2P7K .394 (10.0) .689 (17.5) 1.024 (26.0) .886 (22.5) .032 (.8)3.300 DME2W3P3K .413 (10.5) .748 (19.0) 1.024 (26.0) .886 (22.5) .032 (.8)3.900 DME2W3P9K .443 (11.2) .807 (20.5) 1.024 (26.0) .886 (22.5) .032 (.8)4.700 DME2W4P7K .492 (12.5) .886 (22.5) 1.024 (26.0) .886 (22.5) .032 (.8)5.600 DME2W5P6K .492 (12.5) .846 (21.5) 1.220 (31.0) 1.083 (27.5) .032 (.8)6.800 DME2W6P8K .531 (13.5) .886 (22.5) 1.220 (31.0) 1.083 (27.5) .032 (.8)8.200 DME2W8P2K .590 (15.0) .945 (24.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)

10.000 DME2W10K .630 (16.0) 1.024 (26.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)400 Vdc (200 Vac)

.010 DME4S1K .169 (4.3) .291 (7.4) .406 (10.3) .295 (7.5) .024 (.6)

.012 DME4S12K .173 (4.4) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6)

.015 DME4S15K .173 (4.4) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6)

.018 DME4S18K .173 (4.4) .295 (7.5) .406 (10.3) .295 (7.5) .024 (.6)

.022 DME4S22K .189 (4.8) .311 (7.9) .406 (10.3) .295 (7.5) .024 (.6)

.027 DME4S27K .217 (5.5) .315 (8.0) .406 (10.3) .295 (7.5) .024 (.6)

.033 DME4S33K .236 (6.0) .354 (9.0) .406 (10.3) .295 (7.5) .024 (.6)

.039 DME4S39K .193 (4.9) .315 (8.0) .492 (12.5) .394 (10.0) .024 (.6)

.047 DME4S47K .217 (5.5) .335 (8.5) .492 (12.5) .394 (10.0) .024 (.6)

.056 DME4S56K .217 (5.5) .394 (10.0) .492 (12.5) .394 (10.0) .024 (.6)

.068 DME4S68K .236 (6.0) .413 (10.5) .492 (12.5) .394 (10.0) .024 (.6)

.082 DME4S82K .248 (6.3) .433 (11.0) .492 (12.5) .394 (10.0) .024 (.6)

.100 DME4P1K .256 (6.5) .472 (12.0) .492 (12.5) .394 (10.0) .024 (.6)

.120 DME4P12K .217 (5.5) .394 (10.0) .728 (18.5) .591 (15.0) .024 (.6)

.150 DME4P15K .217 (5.5) .488 (12.4) .728 (18.5) .591 (15.0) .024 (.6)

.180 DME4P18K .217 (5.5) .492 (12.5) .728 (18.5) .591 (15.0) .024 (.6)

.220 DME4P22K .256 (6.5) .512 (13.0) .728 (18.5) .591 (15.0) .024 (.6)

.270 DME4P27K .256 (6.5) .563 (14.3) .728 (18.5) .591 (15.0) .032 (.8)

.330 DME4P33K .295 (7.5) .587 (14.9) .728 (18.5) .591 (15.0) .032 (.8)

.390 DME4P39K .295 (7.5) .606 (15.4) .728 (18.5) .591 (15.0) .032 (.8)

Cap. Catalog T Max. H Max. L Max. S ±.04 (±1.0) d

Normally Stocked


Type DME, Polyester Film CapacitorsFilm

Capacitors

CORNELLDUBILIER




400 Vdc (200 Vac).470 DME4P47K .327 (8.3) .669 (17.0) .728 (18.5) .591 (15.0) .032 (.8).560 DME4P56K .276 (7.0) .630 (16.0) 1.024 (26.0) .886 (22.5) .032 (.8).680 DME4P68K .295 (7.5) .650 (16.5) 1.024 (26.0) .886 (22.5) .032 (.8).820 DME4P82K .315 (8.0) .689 (17.5) 1.024 (26.0) .886 (22.5) .032 (.8)

1.000 DME4W1K .335 (8.5) .728 (18.5) 1.024 (26.0) .886 (22.5) .032 (.8)1.200 DME4W1P2K .374 (9.5) .744 (18.9) 1.024 (26.0) .886 (22.5) .032 (.8)1.500 DME4W1P5K .374 (9.5) .748 (19.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)1.800 DME4W1P8K .433 (11.0) .807 (20.5) 1.220 (31.0) 1.083 (27.5) .032 (.8)2.200 DME4W2P2K .453 (11.5) .866 (22.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)

630 Vdc (250 Vac).010 DME6S1K .197 (5.0) .315 (8.0) .492 (12.5) .394 (10.0) .024 (.6).012 DME6S12K .197 (5.0) .315 (8.0) .492 (12.5) .394 (10.0) .024 (.6).015 DME6S15K .217 (5.5) .335 (8.5) .492 (12.5) .394 (10.0) .024 (.6).018 DME6S18K .217 (5.5) .394 (10.0) .492 (12.5) .394 (10.0) .024 (.6).022 DME6S22K .217 (5.5) .413 (10.5) .492 (12.5) .394 (10.0) .024 (.6).027 DME6S27K .217 (5.5) .429 (10.9) .492 (12.5) .394 (10.0) .024 (.6).033 DME6S33K .256 (6.5) .469 (11.9) .492 (12.5) .394 (10.0) .024 (.6).039 DME6S39K .236 (6.0) .528 (13.4) .492 (12.5) .394 (10.0) .024 (.6).047 DME6S47K .276 (7.0) .531 (13.5) .492 (12.5) .394 (10.0) .024 (.6).056 DME6S56K .236 (6.0) .413 (10.5) .728 (18.5) .591 (15.0) .024 (.6).068 DME6S68K .236 (6.0) .453 (11.5) .728 (18.5) .591 (15.0) .024 (.6).082 DME6S82K .276 (7.0) .472 (12.0) .728 (18.5) .591 (15.0) .024 (.6).100 DME6P1K .256 (6.5) .551 (14.0) .728 (18.5) .591 (15.0) .024 (.6).120 DME6P12K .256 (6.5) .571 (14.5) .728 (18.5) .591 (15.0) .032 (.8).150 DME6P15K .315 (8.0) .630 (16.0) .728 (18.5) .591 (15.0) .032 (.8).180 DME6P18K .315 (8.0) .630 (16.0) .728 (18.5) .591 (15.0) .032 (.8).220 DME6P22K .374 (9.5) .669 (17.0) .728 (18.5) .591 (15.0) .032 (.8).270 DME6P27K .276 (7.0) .650 (16.5) 1.024 (26.0) .886 (22.5) .032 (.8).330 DME6P33K .315 (8.0) .689 (17.5) 1.024 (26.0) .886 (22.5) .032 (.8).390 DME6P39K .335 (8.5) .705 (17.9) 1.024 (26.0) .886 (22.5) .032 (.8).470 DME6P47K .394 (10.0) .728 (18.5) 1.024 (26.0) .886 (22.5) .032 (.8).560 DME6P56K .413 (10.5) .787 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8).680 DME6P68K .472 (12.0) .827 (21.0) 1.024 (26.0) .886 (22.5) .032 (.8).820 DME6P82K .453 (11.5) .807 (20.5) 1.220 (31.0) 1.083 (27.5) .032 (.8)

1.000 DME6W1K .512 (13.0) .866 (22.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)1.200 DME6W1P2K .531 (13.5) .906 (23.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)1.500 DME6W1P5K .630 (16.0) .985 (25.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)1.800 DME6W1P8K .669 (17.0) 1.063 (27.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)2.200 DME6W2P2K .787 (20.0) 1.142 (29.0) 1.220 (31.0) 1.083 (27.5) .032 (.8)

1000 Vdc (250 Vac).010 DME10S1K .236 (6.0) .433 (11.0) .610 (15.5) .492 (12.5) .024 (.6).012 DME10S12K .236 (6.0) .472 (12.0) .610 (15.5) .492 (12.5) .024 (.6).015 DME10S15K .276 (7.0) .492 (12.5) .610 (15.5) .492 (12.5) .024 (.6).018 DME10S18K .295 (7.5) .512 (13.0) .610 (15.5) .492 (12.5) .032 (.8).022 DME10S22K .295 (7.5) .610 (15.5) .610 (15.5) .492 (12.5) .032 (.8).027 DME10S27K .236 (6.0) .512 (13.0) .827 (21.0) .689 (17.5) .032 (.8).033 DME10S33K .256 (6.5) .551 (14.0) .827 (21.0) .689 (17.5) .032 (.8).039 DME10S39K .276 (7.0) .571 (14.5) .827 (21.0) .689 (17.5) .032 (.8).047 DME10S47K .295 (7.5) .610 (15.5) .827 (21.0) .689 (17.5) .032 (.8).056 DME10S56K .295 (7.5) .669 (17.0) .827 (21.0) .689 (17.5) .032 (.8).068 DME10S68K .335 (8.5) .709 (18.0) .827 (21.0) .689 (17.5) .032 (.8).082 DME10S82K .354 (9.0) .728 (18.5) .827 (21.0) .689 (17.5) .032 (.8).100 DME10P1K .394 (10.0) .787 (20.0) .827 (21.0) .689 (17.5) .032 (.8).120 DME10P12K .354 (9.0) .728 (18.5) 1.024 (26.0) .886 (22.5) .032 (.8).150 DME10P15K .394 (10.0) .787 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8).180 DME10P18K .413 (10.5) .866 (22.0) 1.024 (26.0) .886 (22.5) .032 (.8).220 DME10P22K .472 (12.0) .906 (23.0) 1.024 (26.0) .886 (22.5) .032 (.8)

Normally Stocked




Film

Capa

cito

rs

CORNELLDUBILIER


Type DMM, Polyester Film Capacitors


RatedVolts .550 .710 .940 1.024-1.220 1.380

dV/dt—volts per microsecond, maximum100 20 12 8 6250 28 17 12 8 7400 46 28 15 14 12630 72 43 28 21 17

Metallized DC ApplicationsRadial Leads Self Healing

Specifications

Type DMM radial-leaded, metallized polyestercapacitors have non-inductive windings and multi-layered epoxy resin enhancing performance characteristics and humidity resistance. Self healingcharacteristics prevent permanent shorting due tohigh-voltage transients. When long life and perfor-mance stability are critical, Type DMM is the idealsolution.




10,000 M Min.Life Test: 1,000 Hours at 85°C at

125% Rated Voltage



100 Vdc (65 Vac).150 DMM1P15K .236 (6.0) .394 (10.0) .551 (14.0) .394 (10.0) .024 (.6).220 DMM1P22K .236 (6.0) .414 (10.5) .551 (14.0) .394 (10.0) .024 (.6).330 DMM1P33K .236 (6.0) .414 (10.5) .709 (18.0) .591 (15.0) .024 (.6).470 DMM1P47K .236 (6.0) .473 (12.0) .709 (18.0) .591 (15.0) .024 (.6).680 DMM1P68K .276 (7.0) .551 (14.0) .709 (18.0) .591 (15.0) .024 (.6)

1.000 DMM1W1K .354 (9.0) .591 (15.0) .709 (18.0) .591 (15.0) .032 (.8)1.500 DMM1W1P5K .354 (9.0) .670 (17.0) 1.024 (26.0) .886 (22.5) .032 (.8)2.200 DMM1W2P2K .433 (11.0) .788 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8)3.300 DMM1W3P3K .453 (11.5) .788 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8)4.700 DMM1W4P7K .512 (13.0) .906 (23.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)6.800 DMM1W6P8K .630 (16.0) 1.024 (26.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)

10.000 DMM1W10K .709 (18.0) 1.221 (31.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)250 Vdc (160 Vac)

.068 DMM2S68K .236 (6.0) .394 (10.0) .551 (14.0) .390 (10.0) .024 (.6)

.100 DMM2P1K .276 (7.0) .394 (10.0) .551 (14.0) .390 (10.0) .024 (.6)

.150 DMM2P15K .276 (7.0) .433 (11.0) .709 (18.0) .590 (15.0) .024 (.6)

.220 DMM2P22K .276 (7.0) .473 (12.0) .709 (18.0) .590 (15.0) .024 (.6)

.330 DMM2P33K .276 (7.0) .512 (13.0) .709 (18.0) .590 (15.0) .024 (.6)

.470 DMM2P47K .315 (8.0) .591 (15.0) 1.024 (26.0) .886 (22.5) .032 (.8)

.680 DMM2P68K .354 (9.0) .610 (15.5) 1.024 (26.0) .886 (22.5) .032 (.8)

.06(1.5) MAX.

L

H

S

T

d

.787(20) MIN.

Normally Stocked



FilmCapacitors

CORNELLDUBILIER


Type DMM, Polyester Film Capacitors



250 Vdc (160 Vac)1.000 DMM2W1K .394 (10.0) .670 (17.0) 1.024 (26.0) .886 (22.5) .032 (.8)1.500 DMM2W1P5K .394 (10.0) .768 (19.5) 1.221 (31.0) 1.083 (27.5) .032 (.8)2.200 DMM2W2P2K .512 (13.0) .866 (22.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)3.300 DMM2W3P3K .630 (16.0) 1.024 (26.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)4.700 DMM2W4P7K .630 (16.0) 1.024 (26.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)

400 Vdc (200 Vac).033 DMM4S33K .236 (6.0) .414 (10.5) .551 (14.0) .394 (10.0) .024 (.6).047 DMM4S47K .315 (8.0) .433 (11.0) .551 (14.0) .394 (10.0) .024 (.6).068 DMM4S68K .236 (6.0) .512 (13.0) .709 (18.0) .591 (15.0) .024 (.6).100 DMM4P1K .256 (6.5) .512 (13.0) .709 (18.0) .591 (15.0) .024 (.6).150 DMM4P15K .276 (7.0) .551 (14.0) .709 (18.0) .591 (15.0) .032 (.8).220 DMM4P22K .354 (9.0) .630 (16.0) 1.024 (26.0) .886 (22.5) .032 (.8).330 DMM4P33K .354 (9.0) .630 (16.0) 1.024 (26.0) .886 (22.5) .032 (.8).470 DMM4P47K .394 (10.0) .709 (18.0) 1.024 (26.0) .886 (22.5) .032 (.8).680 DMM4P68K .414 (10.5) .709 (18.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)

1.000 DMM4W1K .473 (12.0) .866 (22.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)630 Vdc (250 Vac)

.010 DMM6S1K .236 (6.0) .394 (10.0) .551 (14.0) .394 (10.0) .024 (.6)

.015 DMM6S15K .256 (6.5) .453 (11.5) .551 (14.0) .394 (10.0) .024 (.6)

.022 DMM6S22K .276 (7.0) .492 (12.5) .551 (14.0) .394 (10.0) .024 (.6)

.033 DMM6S33K .315 (8.0) .532 (13.5) .709 (18.0) .591 (15.0) .024 (.6)

.047 DMM6S47K .295 (7.5) .492 (12.5) .709 (18.0) .591 (15.0) .024 (.6)

.068 DMM6S68K .335 (8.5) .571 (14.5) .709 (18.0) .591 (15.0) .032 (.8)

.100 DMM6P1K .374 (9.5) .630 (16.0) .709 (18.0) .591 (15.0) .032 (.8)

.150 DMM6P15K .394 (10.0) .670 (17.0) 1.024 (26.0) .886 (22.5) .032 (.8)

.220 DMM6P22K .433 (11.0) .788 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8)

.330 DMM6P33K .512 (13.0) .866 (22.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)

.470 DMM6P47K .512 (13.0) .866 (22.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)

.680 DMM6P68K .591 (15.0) 1.024 (26.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)1.000 DMM6W1K .689 (17.5) 1.182 (30.0) 1.221 (31.0) 1.083 (27.5) .032 (.8)

Normally Stocked




Film

Capa

cito

rs

CORNELLDUBILIER


Type DMMA, Polyester Film Capacitors


RatedVolts .625 .750-.937 1.062-1.125 1.250-1.500 ≥1.687

dV/dt—volts per microsecond, maximum125 62 34 16 12240 46 22 16 10360 111 72 58 29480 221 122 85 47

Metallized AC ApplicationsRadial Leads Low ESR

Specifications

Type DMMA radial-leaded, metallized polyestercapacitors are designed for AC rated applications.Self healing, low DF, and corona-free at high ACvoltages, Type DMMA is the preferred value formedium current, AC applications.

Voltage Range: 125-480 Vac (250-1000 Vdc)Capacitance Range: .01-5 µFCapacitance Tolerance: ±10% (K) standard


Dielectric Strength: 160% (1minute)Dissipation Factor: .60% Max. (25°C, 1kHz)Insulation Resistance: 10,000 M x µF


Ratings and DimensionsT H L S

Cap. Catalog Maximum Maximum Maximum ±.062 (1.6)µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm)

125 Vac (250 Vdc).047 DMMAAS47K .325 (8.3) .450 (11.4) .625 (15.9) .375 (9.5).068 DMMAAS68K .325 (8.3) .450 (11.4) .750 (19.0) .500 (12.7).100 DMMAAP1K .325 (8.3) .480 (12.2) .750 (19.0) .500 (12.7).150 DMMAAP15K .375 (9.5) .530 (13.5) .750 (19.0) .500 (12.7).220 DMMAAP22K .420 (10.7) .590 (15.0) .750 (19.0) .500 (12.7).330 DMMAAP33K .485 (12.3) .650 (16.5) .750 (19.0) .500 (12.7).470 DMMAAP47K .440 (11.2) .610 (15.5) 1.062 (27.0) .812 (20.6).680 DMMAAP68K .480 (12.2) .670 (17.0) 1.062 (27.0) .812 (20.6)

1.000 DMMAAW1K .545 (13.8) .750 (19.0) 1.062 (27.0) .812 (20.6)1.500 DMMAAW1P5K .575 (14.6) .800 (20.3) 1.250 (31.7) 1.000 (25.4)2.000 DMMAAW2K .655 (16.6) .860 (21.8) 1.250 (31.7) 1.000 (25.4)3.000 DMMAAW3K .685 (17.4) .905 (23.0) 1.500 (38.1) 1.250 (31.7)4.000 DMMAAW4K .710 (18.0) .925 (23.5) 1.500 (38.1) 1.250 (31.7)5.000 DMMAAW5K .775 (19.7) 1.050 (26.7) 1.500 (38.1) 1.250 (31.7)

T H L S Cap. Catalog Maximum Maximum Maximum ±.062 (1.6)

µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm)

240 Vac (400 Vdc).022 DMMABS22K .325 (8.3) .455 (11.6) .750 (19.0) .500 (12.7).033 DMMABS33K .325 (8.3) .455 (11.6) .750 (19.0) .500 (12.7).047 DMMABS47K .325 (8.3) .470 (11.9) .750 (19.0) .500 (12.7).068 DMMABS68K .325 (8.3) .515 (13.1) .750 (19.0) .500 (12.7).100 DMMABP1K .325 (8.3) .485 (12.3) 1.062 (27.0) .812 (20.6).150 DMMABP15K .355 (9.0) .515 (13.1) 1.062 (27.0) .812 (20.6).220 DMMABP22K .405 (10.3) .565 (14.3) 1.062 (27.0) .812 (20.6).330 DMMABP33K .450 (11.4) .640 (16.3) 1.062 (27.0) .812 (20.6).470 DMMABP47K .465 (11.8) .655 (16.6) 1.250 (31.7) 1.000 (25.4).680 DMMABP68K .530 (13.5) .735 (18.7) 1.250 (31.7) 1.000 (25.4)

1.000 DMMABW1K .590 (15.0) .845 (21.5) 1.250 (31.7) 1.000 (25.4)1.500 DMMABW1P5K .640 (16.3) .875 (22.2) 1.500 (38.1) 1.250 (31.7)2.000 DMMABW2K .720 (18.3) .955 (24.2) 1.500 (38.1) 1.250 (31.7)3.000 DMMABW3K .780 (19.8) 1.020 (25.9) 1.500 (38.1) 1.250 (31.7)

L MAX.

H MAX.

S±.062”

(1.6mm)

T

MAX.

TINNEDCOPPERWELDWIRE LEADS.032(.8)

1.18” MIN.(30mm)

1.5mm MAX.



FilmCapacitors

CORNELLDUBILIER


Type DMMA, Polyester Film Capacitors


T H L S Cap. Catalog Maximum Maximum Maximum ±.062 (1.6)


360 Vac (800 Vdc).015 DMMACS15K .295 (7.5) .460 (11.7) .937 (23.8) .687 (17.4).022 DMMACS22K .343 (8.7) .500 (12.7) .937 (23.8) .687 (17.4).033 DMMACS33K .375 (9.5) .530 (13.5) .937 (23.8) .687 (17.4).047 DMMACS47K .405 (10.3) .565 (14.3) .937 (23.8) .687 (17.4).068 DMMACS68K .465 (11.8) .640 (16.3) .937 (23.8) .687 (17.4).100 DMMACP1K .450 (11.4) .610 (15.5) 1.125 (28.6) .875 (22.2).150 DMMACP15K .515 (13.1) .690 (17.5) 1.125 (28.6) .875 (22.2).220 DMMACP22K .590 (15.0) .765 (19.4) 1.125 (28.6) .875 (22.2).330 DMMACP33K .685 (17.4) .890 (22.6) 1.125 (28.6) .875 (22.2).470 DMMACP47K .685 (17.4) .890 (22.6) 1.312 (33.3) 1.000 (25.4).680 DMMACP68K .810 (20.6) 1.015 (25.8) 1.312 (33.3) 1.000 (25.4)

1.000 DMMACW1K .860 (21.8) 1.070 (27.2) 1.500 (38.1) 1.250 (31.7)1.500 DMMACW1P5K .860 (21.8) 1.140 (28.9) 1.937 (49.2) 1.656 (42.0)2.000 DMMACW2K .965 (24.5) 1.265 (32.1) 1.937 (49.2) 1.656 (42.0)

480 Vac (1,000 Vdc).010 DMMADS1K .325 (8.3) .485 (12.3) .937 (23.8) .687 (17.4).015 DMMADS15K .375 (9.5) .530 (13.5) .937 (23.8) .687 (17.4).022 DMMADS22K .440 (11.2) .595 (15.1) .937 (23.8) .687 (17.4).033 DMMADS33K .480 (12.2) .655 (16.6) .937 (23.8) .687 (17.4).047 DMMADS47K .440 (11.2) .610 (15.5) 1.125 (28.6) .875 (22.2).068 DMMADS68K .500 (12.7) .675 (17.1) 1.125 (28.6) .875 (22.2).100 DMMADP1K .580 (14.7) .765 (19.4) 1.125 (28.6) .875 (22.2).150 DMMADP15K .670 (17.0) .875 (22.2) 1.125 (28.6) .875 (22.2).220 DMMADP22K .685 (17.4) .875 (22.2) 1.312 (33.3) 1.000 (25.4).330 DMMADP33K .700 (17.8) .905 (23.0) 1.312 (33.3) 1.000 (25.4).470 DMMADP47K .810 (20.6) 1.030 (26.2) 1.500 (38.1) 1.250 (31.7).680 DMMADP68K .875 (22.2) 1.110 (28.2) 1.687 (42.8) 1.468 (37.3)

1.000 DMMADW1K .950 (24.1) 1.220 (31.0) 1.937 (49.2) 1.656 (42.0)1.500 DMMADW1P5K 1.062 (27.0) 1.345 (34.2) 2.125 (54.0) 1.875 (47.6)




CORNELLDUBILIER


Film

Capa

cito

rsType WPP, Polypropylene Film Capacitors

Film/Foil High FrequencyAxial Leads Precise Values

Specifications

Type WPP axial-leaded, polypropylene film/foilcapacitors incorporate non-inductive extended foilconstruction with epoxy end seals. Type WPP israted for continuous-duty operation over thetemperature range of -55°C to 105°C withoutvoltage derating. Low ESR, low dissipation factorand the inherent stability make Type WPP idealfor tight tolerance, pulse and high-frequencyapplications.






RatedVolts .625 .750-.875 .937-1.125 1.250-1.312 1.375-1.562 ≥1.750

dV/dt—volts per microsecond, maximum100 4200 4000 2900 1900 1600 1100200 6900 4100 3000 2400 2000 1400400 19500 10000 3900 2600 2200600 60000 20000 12000 6700 3000

1000 37000 15000 9200 7400 3400



100 Vdc (70 Vac).0010 WPP1D1K .220 (5.6) .625 (15.9) .020 (.5).0015 WPP1D15K .220 (5.6) .625 (15.9) .020 (.5).0022 WPP1D22K .220 (5.6) .625 (15.9) .020 (.5).0033 WPP1D33K .228 (5.8) .625 (15.9) .020 (.5).0047 WPP1D47K .240 (6.1) .625 (15.9) .020 (.5).0068 WPP1D68K .250 (6.3) .625 (15.9) .020 (.5).0100 WPP1S1K .250 (6.3) .625 (15.9) .020 (.5).0150 WPP1S15K .250 (6.3) .625 (15.9) .020 (.5).0220 WPP1S22K .270 (6.9) .625 (15.9) .020 (.5).0330 WPP1S33K .319 (8.1) .625 (15.9) .024 (.6).0470 WPP1S47K .298 (7.6) .875 (22.2) .024 (.6).0680 WPP1S68K .350 (8.9) .875 (22.2) .024 (.6).1000 WPP1P1K .403 (10.2) .906 (23.0) .024 (.6).1500 WPP1P15K .515 (13.1) 1.063 (27.0) .024 (.6).2200 WPP1P22K .529 (13.4) 1.260 (32.0) .024 (.6).3300 WPP1P33K .551 (14.0) 1.250 (31.7) .024 (.6).4700 WPP1P47K .622 (15.8) 1.250 (31.7) .032 (.8).6800 WPP1P68K .684 (17.4) 1.375 (34.9) .032 (.8)

1.0000 WPP1W1K .810 (20.6) 1.375 (34.9) .040 (1.0)1.5000 WPP1W1P5K .828 (21.0) 1.750 (44.4) .040 (1.0)2.0000 WPP1W2K .934 (23.7) 1.750 (44.4) .040 (1.0)2.5000 WPP1W2P5K .948 (24.1) 2.000 (50.8) .040 (1.0)


100 Vdc (70 Vac) (cont’d)3.0000 WPP1W3K 1.030 (26.2) 2.000 (50.8) .040 (1.0)

200/250 Vdc (140 Vac).0010 WPP2D1K .220 (5.6) .625 (15.9) .020 (.5).0015 WPP2D15K .220 (5.6) .625 (15.9) .020 (.5).0022 WPP2D22K .220 (5.6) .625 (15.9) .020 (.5).0033 WPP2D33K .228 (5.8) .625 (15.9) .020 (.5).0047 WPP2D47K .240 (6.1) .625 (15.9) .020 (.5).0068 WPP2D68K .250 (6.3) .625 (15.9) .020 (.5).0100 WPP2S1K .250 (6.3) .625 (15.9) .020 (.5).0150 WPP2S15K .276 (7.0) .625 (15.9) .020 (.5).0220 WPP2S22K .295 (7.5) .625 (15.9) .020 (.5).0330 WPP2S33K .319 (8.1) .625 (15.9) .024 (.6).0470 WPP2S47K .335 (8.5) .875 (22.2) .024 (.6).0680 WPP2S68K .350 (8.9) .906 (23.0) .024 (.6).1000 WPP2P1K .413 (10.5) 1.125 (28.6) .024 (.6).1500 WPP2P15K .492 (12.5) 1.312 (33.3) .024 (.6)

3.3000 WPP1W3P3K .925 (23.5) 2.520 (64.0) .040 (1.0)3.5000 WPP1W3P5K .965 (24.5) 2.520 (64.0) .040 (1.0)4.0000 WPP1W4K 1.004 (25.5) 2.520 (64.0) .040 (1.0)4.5000 WPP1W4P5K 1.063 (27.0) 2.520 (64.0) .040 (1.0)5.0000 WPP1W5K 1.102 (28.0) 2.520 (64.0) .040 (1.0)

1.50” MIN.(38.1mm)

LMAX.

1.50” MIN.(38.1mm)

d

DMAX.



CORNELLDUBILIER


FilmCapacitors

Type WPP, Polypropylene Film Capacitors



200/250 Vdc (140 Vac) (cont’d)

.3300 WPP2P33K .591 (15.0) 1.750 (44.4) .024 (.6)

.4700 WPP2P47K .581 (14.8) 1.750 (44.4) .032 (.8)

.6800 WPP2P68K .684 (17.4) 1.750 (44.4) .032 (.8)1.0000 WPP2W1K .820 (20.8) 1.750 (44.4) .040 (1.0)1.5000 WPP2W1P5K .922 (23.4) 2.000 (50.8) .040 (1.0)2.0000 WPP2W2K 1.052 (26.7) 2.000 (50.8) .040 (1.0)

400 Vdc (250 Vac).0010 WPP4D1K .220 (5.6) .625 (15.9) .020 (.5).0015 WPP4D15K .220 (5.6) .625 (15.9) .020 (.5).0022 WPP4D22K .220 (5.6) .625 (15.9) .020 (.5).0033 WPP4D33K .228 (5.8) .625 (15.9) .020 (.5).0047 WPP4D47K .256 (6.5) .750 (19.0) .020 (.5).0068 WPP4D68K .276 (7.0) .750 (19.0) .020 (.5).0100 WPP4S1K .290 (7.4) .750 (19.0) .024 (.6).0150 WPP4S15K .352 (8.9) .750 (19.0) .024 (.6).0220 WPP4S22K .374 (9.5) .875 (22.2) .024 (.6).0330 WPP4S33K .374 (9.5) 1.062 (27.0) .024 (.6).0470 WPP4S47K .394 (10.0) 1.250 (31.7) .024 (.6).0680 WPP4S68K .415 (10.5) 1.250 (31.7) .024 (.6).1000 WPP4P1K .512 (13.0) 1.250 (31.7) .024 (.6).1500 WPP4P15K .615 (15.6) 1.250 (31.7) .032 (.8).2200 WPP4P22K .595 (15.1) 1.562 (39.7) .032 (.8).3300 WPP4P33K .673 (17.1) 1.750 (44.4) .032 (.8).4700 WPP4P47K .787 (20.0) 1.750 (44.4) .040 (1.0).6800 WPP4P68K .852 (21.6) 2.000 (50.8) .040 (1.0)

1.0000 WPP4W1K 1.016 (25.8) 2.000 (50.8) .040 (1.0)

600/630 Vdc (250 Vac).0010 WPP6D1K .253 (6.4) .625 (15.9) .020 (.5).0015 WPP6D15K .220 (5.6) .750 (19.0) .020 (.5).0022 WPP6D22K .226 (5.7) .750 (19.0) .020 (.5).0033 WPP6D33K .264 (6.7) .750 (19.0) .020 (.5).0047 WPP6D47K .295 (7.5) .812 (20.6) .020 (.5).0068 WPP6D68K .311 (7.9) .812 (20.6) .024 (.6).0100 WPP6S1K .338 (8.6) .937 (23.8) .024 (.6).0150 WPP6S15K .390 (9.9) .937 (23.8) .024 (.6).0220 WPP6S22K .424 (10.8) 1.062 (27.0) .024 (.6).0330 WPP6S33K .472 (12.0) 1.260 (32.0) .024 (.6).0470 WPP6S47K .512 (13.0) 1.260 (32.0) .024 (.6).0680 WPP6S68K .605 (15.4) 1.260 (32.0) .032 (.8).1000 WPP6P1K .690 (17.5) 1.125 (28.6) .040 (1.0).1500 WPP6P15K .605 (15.4) 1.750 (44.4) .040 (1.0).2200 WPP6P22K .715 (18.2) 1.750 (44.4) .040 (1.0).3300 WPP6P33K .857 (21.8) 1.750 (44.4) .040 (1.0).4700 WPP6P47K .922 (23.4) 2.000 (50.8) .040 (1.0)

.2200 WPP2P22K .531 (13.5) 1.312 (33.3) .024 (.6)

2.5000 WPP2W2P5K .965 (24.5) 2.520 (64.0) .040 (1.0)3.0000 WPP2W3K 1.043 (26.5) 2.520 (64.0) .040 (1.0)3.5000 WPP2W3P5K 1.102 (28.0) 2.520 (64.0) .040 (1.0)

1.5000 WPP4W1P5K 1.043 (26.5) 2.520 (64.0) .040 (1.0)

.6800 WPP6P68K 1.004 (25.5) 2.520 (64.0) .040 (1.0)

.8200 WPP6P82K 1.102 (28.0) 2.520 (64.0) .040 (1.0)


1000 Vdc (250 Vac).0010 WPP10D1K .295 (7.5) .812 (20.6) .020 (.5).0015 WPP10D15K .315 (8.0) .812 (20.6) .020 (.5).0022 WPP10D22K .346 (8.8) .812 (20.6) .024 (.6).0033 WPP10D33K .374 (9.5) .812 (20.6) .024 (.6).0047 WPP10D47K .420 (10.7) .812 (20.6) .024 (.6).0068 WPP10D68K .453 (11.5) 1.000 (25.4) .024 (.6).0100 WPP10S1K .453 (11.5) 1.125 (28.6) .024 (.6).0150 WPP10S15K .492 (12.5) 1.125 (28.6) .024 (.6).0220 WPP10S22K .551 (14.0) 1.125 (28.6) .024 (.6).0330 WPP10S33K .575 (14.6) 1.457 (37.0) .032 (.8).0470 WPP10S47K .669 (17.0) 1.457 (37.0) .032 (.8).0680 WPP10S68K .717 (18.2) 1.375 (34.9) .040 (1.0).1000 WPP10P1K .850 (21.6) 1.375 (34.9) .040 (1.0).1500 WPP10P15K 1.023 (26.0) 1.375 (34.9) .040 (1.0).2200 WPP10P22K .854 (21.7) 2.125 (54.0) .040 (1.0).3300 WPP10P33K 1.025 (26.0) 2.125 (54.0) .040 (1.0).4700 WPP10P47K 1.063 (27.0) 2.520 (64.0) .040 (1.0).5000 WPP10P50K 1.083 (27.5) 2.520 (64.0) .040 (1.0)




CORNELLDUBILIER


Film

Capa

cito

rsType 930, Polypropylene Film Capacitors

Metallized High Voltage/High FrequencyAxial Leads Switching Power Supplies

Specifications

Type 930 axial-leaded, metallized polypropylene capaci-tors are available in a wide range of capacitance values inreduced sizes. Flame-retardant tape wrap and epoxy endseals provide moisture resistance. Used most frequentlyin high-voltage/high-frequency switching power supplieswhere superior stability and AC performance characteristicsare important. This non-protected film capacitor hasUnderwriters Laboratories, Inc. recognition for constructiononly. U.L. File Number assigned is E128034(N).






D L ESR Maximum Ripple Current (Amps rms) at 20 kHz Cap. Catalog Maximum +.062 (1.5) (milliohms) Case Temperature

µF Number Inches (mm) Inches (mm) 20-100 kHz +25C +35C +45C +55C +65C +75C +85C

100 Vdc (70 Vac).22 930C1P22K .275 (7.0) .750 (19.0) ---.27 930C1P27K .298 (7.6) .750 (19.0) ---.33 930C1P33K .324 (8.2) .750 (19.0) ---.39 930C1P39K .347 (8.8) .750 (19.0) ---.47 930C1P47K .376 (9.5) .750 (19.0) 37 3.7 3.4 3.1 2.8 2.5 2.0 1.4.56 930C1P56K .321 (8.2) 1.000 (25.4) 35 3.9 3.6 3.3 2.9 2.6 2.1 1.5.68 930C1P68K .348 (8.8) 1.000 (25.4) 33 4.1 3.8 3.5 3.1 2.8 2.2 1.6.82 930C1P82K .377 (9.6) 1.000 (25.4) 31 4.3 4.0 3.6 3.2 2.9 2.3 1.7

1.00 930C1W1K .421 (10.7) 1.000 (25.4) 26 5.5 5.1 4.7 4.2 3.6 2.8 2.61.20 930C1W1P2K .454 (11.5) 1.000 (25.4) 24 5.7 5.3 4.9 4.4 3.8 3.0 2.81.50 930C1W1P5K .500 (12.7) 1.000 (25.4) 20 6.1 5.5 5.1 4.6 4.0 3.2 3.11.80 930C1W1P8K .541 (13.7) 1.000 (25.4) 19 6.3 5.7 5.3 4.8 4.1 3.4 3.02.00 930C1W2K .486 (12.3) 1.250 (31.7) 18 6.5 6.0 5.5 4.9 4.2 3.5 3.22.20 930C1W2P2K .507 (12.9) 1.250 (31.7) 18 6.8 6.3 5.7 2.1 4.4 3.6 3.32.70 930C1W2P7K .554 (14.1) 1.250 (31.7) 17 7.1 6.5 6.0 5.3 4.6 3.7 3.43.00 930C1W3K .581 (14.8) 1.250 (31.7) 16 7.3 6.7 6.2 5.5 4.8 3.9 3.53.30 930C1W3P3K .606 (15.4) 1.250 (31.7) 16 7.4 6.8 6.4 5.6 4.9 4.0 3.63.90 930C1W3P9K .654 (16.6) 1.250 (31.7) 15 7.6 6.9 6.6 5.8 5.1 4.1 3.74.00 930C1W4K .537 (13.6) 1.750 (44.4) 15 7.8 7.0 6.7 5.9 5.2 4.2 3.84.70 930C1W4P7K .577 (14.7) 1.750 (44.4) 15 8.1 7.4 6.8 6.0 5.3 4.3 3.95.00 930C1W5K .593 (15.1) 1.750 (44.4) 14 8.3 7.6 7.0 6.2 5.4 4.4 4.05.60 930C1W5P6K .624 (15.8) 1.750 (44.4) 14 8.4 7.7 7.1 6.4 5.5 4.5 4.16.00 930C1W6K .644 (16.4) 1.750 (44.4) 14 8.5 7.8 7.2 6.5 5.6 1.6 4.26.80 930C1W6P8K .682 (17.3) 1.750 (44.4) 13 8.5 8.0 7.4 6.7 5.7 4.7 4.38.00 930C1W8K .735 (18.7) 1.750 (44.4) 13 8.6 8.3 7.7 6.8 6.0 4.8 4.48.20 930C1W8P2K .743 (18.9) 1.750 (44.4) 13 8.8 8.6 8.0 7.0 6.1 4.9 4.5

10.00 930C1W10K .815 (20.7) 1.750 (44.4) 12 9.0 9.0 8.5 7.6 6.6 5.4 4.9


RatedVolts .750 1.000 1.250 ≥1.750

dV/dt—volts per microsecond, maximum100 25 14 10 6250 37 21 15 9400 49 28 20 13630 74 43 30 19

D

#20 AWG (.032 dia)TINNED SOLID COPPER LEADS

1.625”MIN

(41.28mm)

1.625”MIN

(41.28mm)

L+.062”

(1.5mm)

Normally Stocked



Type 930, Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors



250 Vdc (175 Vac)

.100 930C2P1K .315 (8.0) .750 (19.0) ---

.120 930C2P12K .315 (8.0) .750 (19.0) ---

.150 930C2P15K .335 (8.5) .750 (19.0) ---

.180 930C2P18K .353 (9.0) .750 (19.0) ---

.220 930C2P22K .335 (8.5) 1.000 (25.4) ---

.270 930C2P27K .333 (8.5) 1.000 (25.4) ---

.330 930C2P33K .362 (9.2) 1.000 (25.4) ---

.390 930C2P39K .389 (9.9) 1.000 (25.4) ---

.470 930C2P47K .422 (10.7) 1.000 (25.4) 35 3.8 3.7 3.6 3.4 2.9 2.4 1.7

.560 930C2P56K .464 (11.8) 1.000 (25.4) 33 3.9 3.8 3.7 3.5 3.1 2.5 1.8

.680 930C2P68K .472 (12.0) 1.250 (31.7) 32 4.0 3.9 3.8 3.7 3.2 2.6 1.9

.820 930C2P82K .471 (12.0) 1.250 (31.7) 31 4.2 4.1 4.0 3.9 3.4 2.8 2.01.000 930C2W1K .513 (13.0) 1.260 (32.0) 28 4.4 4.4 4.4 4.4 4.3 3.5 3.21.200 930C2W1P2K .554 (14.1) 1.260 (32.0) 27 4.7 4.6 4.5 5.0 4.5 3.7 3.31.500 930C2W1P5K .613 (15.6) 1.260 (32.0) 26 5.1 5.0 4.9 5.4 4.7 3.9 3.51.800 930C2W1P8K .667 (16.9) 1.250 (31.7) 25 5.9 5.8 5.7 5.7 5.0 4.1 3.72.000 930C2W2K .700 (17.8) 1.250 (31.7) 21 7.2 7.2 6.8 6.0 5.2 4.3 3.92.200 930C2W2P2K .650 (16.5) 1.750 (44.4) 20 8.4 7.5 7.0 6.3 5.4 4.5 4.12.700 930C2W2P7K .669 (17.0) 1.750 (44.4) 19 8.6 7.8 7.3 6.6 5.7 4.7 4.33.000 930C2W3K .703 (17.8) 1.750 (44.4) 18 9.0 8.3 7.6 6.8 5.9 4.8 4.43.300 930C2W3P3K .734 (18.6) 1.750 (44.4) 18 9.0 8.4 7.8 7.0 6.0 4.9 4.53.900 930C2W3P9K .794 (20.2) 1.750 (44.4) 17 9.0 8.5 8.0 7.2 6.2 5.0 4.64.000 930C2W4K .803 (20.4) 1.750 (44.4) 16 9.0 8.5 8.2 7.4 6.3 5.1 4.74.700 930C2W4P7K .866 (22.0) 1.750 (44.4) 16 9.0 8.8 8.5 7.7 6.6 5.3 4.95.000 930C2W5K .892 (22.6) 1.750 (44.4) 15 9.0 9.0 8.8 7.9 6.8 5.6 5.15.600 930C2W5P6K .941 (23.9) 1.750 (44.4) 15 9.0 9.0 8.9 8.0 7.0 5.8 5.36.000 930C2W6K .972 (24.7) 1.750 (44.4) 15 9.0 9.0 9.0 8.2 7.2 5.9 5.56.800 930C2W6P8K .882 (22.4) 2.250 (57.1) 15 9.0 9.0 9.0 8.4 7.4 6.0 5.68.000 930C2W8K .953 (24.2) 2.250 (57.1) 14 9.0 9.0 9.0 8.7 7.8 6.3 5.88.200 930C2W8P2K .964 (24.5) 2.250 (57.1) 14 9.0 9.0 9.0 8.8 7.9 6.4 5.9

10.000 930C2W10K 1.060 (26.9) 2.250 (57.1) 13 9.0 9.0 9.0 9.0 8.3 6.8 6.2

400 Vdc (275 Vac)

.047 930C4S47K .315 (8.0) .750 (19.0) ---

.056 930C4S56K .315 (8.0) .750 (19.0) ---

.068 930C4S68K .315 (8.0) .750 (19.0) ---

.082 930C4S82K .320 (8.1) .750 (19.0) ---

.100 930C4P1K .348 (8.8) .750 (19.0) ---

.120 930C4P12K .299 (7.6) 1.000 (25.4) ---

.150 930C4P15K .335 (8.5) 1.000 (25.4) ---

.180 930C4P18K .353 (9.0) 1.000 (25.4) ---

.220 930C4P22K .385 (9.8) 1.000 (25.4) ---

.270 930C4P27K .421 (10.7) 1.000 (25.4) ---

.330 930C4P33K .469 (11.9) 1.000 (25.4) ---

.390 930C4P39K .503 (12.8) 1.000 (25.4) ---

.470 930C4P47K .545 (13.8) 1.260 (32.0) 32 5.7 5.5 5.0 4.4 3.8 3.2 2.2

.560 930C4P56K .503 (12.8) 1.260 (32.0) 31 5.7 5.7 5.3 4.4 4.1 3.3 2.3

.680 930C4P68K .551 (14.0) 1.260 (32.0) 30 5.7 5.7 5.5 4.8 4.3 3.5 2.4

.820 930C4P82K .599 (15.2) 1.260 (32.0) 28 5.7 5.7 5.6 5.3 4.5 3.7 2.61.000 930C4W1K .655 (16.6) 1.260 (32.0) 27 5.7 5.7 5.7 5.7 5.7 4.7 4.31.200 930C4W1P2K .712 (18.1) 1.260 (32.0) 26 6.3 6.2 6.0 5.9 5.8 4.9 4.51.500 930C4W1P5K .709 (18.0) 1.750 (44.4) 25 7.0 6.9 6.7 6.6 6.5 5.2 4.71.800 930C4W1P8K .716 (18.2) 1.750 (44.4) 23 8.0 7.9 7.8 7.7 6.8 5.5 5.02.000 930C4W2K .752 (19.1) 1.750 (44.4) 21 9.0 9.0 9.0 8.0 7.0 5.7 5.22.200 930C4W2P2K .827 (21.0) 1.750 (44.4) 20 9.0 9.0 9.0 8.3 7.4 5.9 5.42.700 930C4W2P7K .865 (22.0) 1.750 (44.4) 19 9.0 9.0 9.0 8.6 7.6 6.0 5.63.000 930C4W3K .909 (23.1) 1.750 (44.4) 17 9.0 9.0 9.0 9.0 7.9 6.4 5.93.300 930C4W3P3K .951 (24.1) 1.750 (44.4) 16 9.0 9.0 9.0 9.0 8.1 6.6 6.33.900 930C4W3P9K 1.031 (26.2) 1.750 (44.4) 15 9.0 9.0 9.0 9.0 8.3 6.8 6.5






CORNELLDUBILIER


Film

Capa

cito

rs



630 Vdc (275 Vac)

.022 930C6S22K .315 (8.0) .750 (19.0) ---

.027 930C6S27K .315 (8.0) .750 (19.0) ---

.033 930C6S33K .334 (8.5) .750 (19.0) ---

.039 930C6S39K .358 (9.1) .750 (19.0) ---

.047 930C6S47K .388 (9.9) .750 (19.0) ---

.056 930C6S56K .418 (10.6) .750 (19.0) ---

.068 930C6S68K .354 (9.0) 1.000 (25.4) ---

.082 930C6S82K .374 (9.5) 1.000 (25.4) ---

.100 930C6P1K .433 (11.0) 1.000 (25.4) ---

.120 930C6P12K .443 (11.2) 1.000 (25.4) ---

.150 930C6P15K .512 (13.0) 1.260 (32.0) ---

.180 930C6P18K .538 (13.7) 1.260 (32.0) ---

.220 930C6P22K .496 (12.6) 1.260 (32.0) ---

.270 930C6P27K .542 (13.8) 1.260 (32.0) ---

.330 930C6P33K .593 (15.1) 1.260 (32.0) ---

.390 930C6P39K .639 (16.2) 1.260 (32.0) ---

.470 930C6P47K .696 (17.7) 1.457 (37.0) 28 6.8 6.3 5.8 5.2 4.5 3.6 2.6

.560 930C6P56K .608 (15.4) 1.750 (44.4) 26 7.4 6.9 6.3 5.6 4.8 4.0 2.8

.680 930C6P68K .709 (18.0) 1.750 (44.4) 25 7.8 7.2 6.6 5.9 5.1 4.2 2.9

.820 930C6P82K .724 (18.4) 1.750 (44.4) 22 8.1 7.5 6.9 6.2 5.3 4.3 3.11.000 930C6W1K .794 (20.2) 1.850 (47.0) 18 8.6 7.9 7.3 6.5 5.6 4.6 3.6


Dielectric Strength: 200% (1 minute)Dissipation Factor: .10% Max. (25°C, 1kHz)Insulation Resistance: 200,000 M x µFLife Test: 1,000 Hours at 85°C at 125% Rated Voltage



CORNELLDUBILIER


FilmCapacitors

Metallized Power SuppliesAxial Leads High Current Circuits

Specifications

Type 935 axial-leaded, metallized polypropylenecapacitors are designed for 20-100 kHz switchingpower supply input filtering, DC blocking and outputfilter applications where high current, high capaci-tance and low ESR values are important. Dry sec-tions are sealed with flame-retardant outer wrapand epoxy end seals for moisture resistance. Thisnon-protected film capacitor has UnderwritersLaboratories, Inc. recognition for construction only.U.L. File Number assigned is E128034(N).

Voltage Range: 100-400 Vdc (70-275 Vac)Capacitance Range: 1-30 µFCapacitance Tolerance: ±10% (K) standard



RatedVolts .750 .938 1.250 1.500 1.750 2.250

dV/dt—volts per microsecond, maximum100 25 16 10 8 5200 15 12 9 7400 19 16 11


MaxESR Maximum Ripple Current (Amps RMS) 20-100 kHz

Cap. Catalog D D± L d (milliohms) Case TemperatureµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) 20-100 kHz +25C +35C +45C +55C +65C +75C +85C

With Wire Leads 100 Vdc (70 Vac)1 935C1W1K .469 (11.9) .062 (1.6) .750 (19.0) .032 (.8) 15 9.2 8.5 7.8 7.0 6.0 4.9 4.52 935C1W2K .534 (13.6) .062 (1.6) .938 (23.8) .032 (.8) 12 10.8 10.0 9.1 8.2 7.0 5.8 5.33 935C1W3K .624 (15.8) .093 (2.4) .938 (23.8) .040 (1.0) 11 12.1 11.2 10.3 9.2 8.0 6.5 5.95 935C1W5K .640 (16.3) .093 (2.4) 1.250 (31.7) .040 (1.0) 10 13.8 12.7 11.6 10.4 9.0 7.4 6.7

10 935C1W10K .805 (20.4) .093 (2.4) 1.500 (38.1) .040 (1.0) 9 15.0 15.0 14.2 12.7 11.0 9.0 8.220 935C1W20K .875 (22.2) .125 (3.2) 2.250 (57.1) .040 (1.0) 8 15.0 15.0 15.0 15.0 13.6 11.1 10.030 935C1W30K 1.075 (27.3) .125 (3.2) 2.250 (57.1) .040 (1.0) 6 15.0 15.0 15.0 15.0 15.0 12.4 11.4

With Wire Leads 200 Vdc (140 Vac)1 935C2W1K .450 (11.4) .062 (1.6) 1.250 (31.7) .032 (.8) 20 7.3 7.3 7.3 7.3 7.2 5.9 5.42 935C2W2K .605 (15.4) .093 (2.4) 1.250 (31.7) .032 (.8) 15 12.0 12.0 11.3 10.1 8.7 7.1 6.53 935C2W3K .654 (16.6) .093 (2.4) 1.500 (38.1) .040 (1.0) 13 15.0 13.8 12.6 11.3 9.8 8.0 7.35 935C2W5K .769 (19.5) .093 (2.4) 1.750 (44.4) .040 (1.0) 11 15.0 15.0 14.7 13.1 11.4 9.3 8.5

10 935C2W10K .905 (23.0) .125 (3.2) 2.250 (57.1) .040 (1.0) 9 15.0 15.0 15.0 15.0 13.8 11.3 10.320 935C2W20K 1.315 (33.4) .125 (3.2) 2.250 (57.1) .040 (1.0) 6 15.0 15.0 15.0 15.0 15.0 14.1 12.8

With Wire Leads 400 Vdc (275 Vac)1 935C4W1K .620 (15.7) .093 (2.4) 1.500 (38.1) .032 (.8) 19 9.5 9.5 9.5 9.5 9.5 7.8 7.12 935C4W2K .802 (20.4) .093 (2.4) 1.750 (44.4) .040 (1.0) 15 15.0 15.0 15.0 13.4 11.6 9.5 8.73 935C4W3K .961 (24.4) .125 (3.2) 1.750 (44.4) .040 (1.0) 12 15.0 15.0 15.0 15.0 13.1 10.7 9.85 935C4W5K 1.067 (27.1) .125 (3.2) 2.250 (57.1) .040 (1.0) 10 15.0 15.0 15.0 15.0 15.0 12.5 11.4

10 935C4W10K 1.543 (39.2) .125 (3.2) 2.250 (57.1) .040 (1.0) 6 15.0 15.0 15.0 15.0 15.0 15.0 14.1

WIRE LEADSTINNED SOLID COPPER LEADS

d

LUG LEADS

1.625”MIN

(41.28mm)

L±0.062

1.625”MIN

(41.28mm)

D

TINNEDLUG

L±0.062

L±0.078

0.156 ± 0.005 DIA

0.312 MIN D

0.360±0.005

0.032±0.002

Normally Stocked






CORNELLDUBILIER


Film

Capa

cito

rs


MaxESR Maximum Ripple Current (Amps RMS) 20-100 kHz

Cap. Catalog D D± L L1 (milliohms) Case TemperatureµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) 20-100 kHz +25C +35C +45C +55C +65C +75C +85C

With Lug Leads 100 Vdc (70 Vac)1 935H1W1K .469 (11.9) .062 (1.6) .750 (19.0) 1.640 (41.6) 15 10.3 9.5 8.7 7.8 6.7 5.5 5.02 935H1W2K .534 (13.6) .062 (1.6) .938 (23.8) 1.828 (46.4) 12 12.0 11.0 10.0 8.9 7.8 6.3 5.83 935H1W3K .624 (15.8) .093 (2.4) .938 (23.8) 1.828 (46.4) 11 13.3 12.3 11.2 10.0 8.7 7.1 6.55 935H1W5K .640 (16.3) .093 (2.4) 1.250 (31.7) 2.098 (53.3) 10 14.8 13.7 12.5 11.2 9.7 7.9 7.2

10 935H1W10K .803 (20.4) .093 (2.4) 1.500 (38.1) 2.252 (57.2) 9 17.8 16.5 15.0 13.5 11.7 9.5 8.720 935H1W20K .875 (22.2) .125 (3.2) 2.250 (57.1) 3.054 (77.6) 8 21.6 20.0 18.3 16.4 14.2 11.6 10.630 935H1W30K 1.075 (27.3) .125 (3.2) 2.250 (57.1) 3.054 (77.6) 6 24.3 22.5 20.5 18.4 15.9 13.0 11.9

With Lug Leads 200 Vdc (140 Vac)1 935H2W1K .450 (11.4) .062 (1.6) 1.250 (31.7) 2.098 (53.3) 20 7.3 7.3 7.3 7.3 7.3 6.4 5.82 935H2W2K .605 (15.4) .093 (2.4) 1.250 (31.7) 2.098 (53.3) 15 14.3 13.3 12.1 10.8 9.4 7.7 7.03 935H2W3K .654 (16.6) .093 (2.4) 1.500 (38.1) 2.252 (57.2) 13 15.9 14.7 13.5 12.0 10.4 8.5 7.85 935H2W5K .768 (19.5) .093 (2.4) 1.750 (44.4) 2.570 (65.3) 11 18.3 17.0 15.5 13.9 12.0 9.8 8.9

10 935H2W10K .905 (23.0) .125 (3.2) 2.250 (57.1) 3.054 (77.6) 9 22.4 20.7 18.9 16.9 14.6 12.0 10.920 935H2W20K 1.315 (33.4) .125 (3.2) 2.250 (57.1) 3.054 (77.6) 6 27.4 25.4 23.2 20.7 17.9 14.7 13.4

With Lug Leads 400 Vdc (275 Vac)1 935H4W1K .620 (15.7) .093 (2.4) 1.500 (38.1) 2.252 (57.2) 19 9.5 9.5 9.5 9.5 9.5 8.3 7.52 935H4W2K .802 (20.4) .093 (2.4) 1.750 (44.4) 2.570 (65.3) 15 15.0 15.0 15.0 14.2 12.3 10.0 9.13 935H4W3K .961 (24.4) .125 (3.2) 1.750 (44.4) 2.570 (65.3) 12 21.1 19.5 17.8 15.9 13.8 11.3 10.35 935H4W5K 1.067 (27.1) .125 (3.2) 2.250 (57.1) 3.054 (77.6) 10 24.4 22.6 20.6 18.5 16.0 13.1 11.9

10 935H4W10K 1.543 (39.2) .125 (3.2) 2.250 (57.1) 3.054 (77.6) 6 30.0 27.8 25.4 22.7 19.7 16.1 14.7


Type 940C through 943C Power Film Capacitors Electrical Characteristics

CORNELLDUBILIER


FilmCapacitors

Typical Characteristics

Operating Temperature -55°C to +105°C ** Full rated voltage at 85°C-Derate linearly to 50% rated voltage at 105°C

Capacitance Tolerance ±10% standard tolerance

Dissipation Factor <0.1% at 1 kHz, 25°C

Dielectric Withstand 1.6 x rated voltage for 60 seconds

Insulation Resistance >100,000 megohms x µF at 100 Vdcmeasured after 2 minutes

Equivalent Series Resistance (ESR) See data tables for valuesMaximum value measured at 25°C, 100 KHz

Equivalent Series Inductance (ESL) See data tables for values

dV/dt See data tables for values

Rated Current, Ipk, Irms See data tables for valuesMaximum allowable current in Amperes at 70°C

Capacitance Temperature Coefficient -200 ppm/°C ±100 ppm

Service Life 30,000 hours @ rated Vac, 70°C60,000 hours @ rated Vdc, 70°C

Accelerated Life 1.25 x rated DC voltage at 85°Cfor 2,000 Hours

Performance <3% capacitance change

ESR <125% of initial reading

IR >50% of initial limit

Accelerated Pulse Testing per IEC-384

Performance <3% in capacitance change

<.003 increase in df from initial value

ACCELERATED TESTS




Type 940C, High dV/dt, Round Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs

Double MetallizedAxial Leads

Specifications

Type 940C round, axial film capacitors usepolypropylene film and dual metallized electrodesfor both self healing properties and high peakcurrent carrying capability (dV/dt). This seriesfeatures low ESR characteristics, excellent highfrequency and high voltage capabilities.

Voltage Range: 600-3000 VdcCapacitance Range: 0.01-4.7 µFCapacitance Tolerance: ±10%Operating Temperature Range: -55°C to 105°C**Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 105°C


Typical Typical Cap. Catalog D L d ESR ESL dV/dt I peak IRMSµF Number Inches (mm) Inches (mm) Inches (mm) milliohms nH V/µs A A

600 Vdc (275 Vac).10 940C6P1K .354 (9.0) 1.339 (34.0) .032 (.8) 28 19 196 20 2.5.15 940C6P15K .413 (10.5) 1.339 (34.0) .040 (1.0) 13 20 196 29 4.0.22 940C6P22K .453 (11.5) 1.339 (34.0) .040 (1.0) 12 20 196 43 4.4.33 940C6P33K .531 (13.5) 1.339 (34.0) .040 (1.0) 9 21 196 65 5.6.47 940C6P47K .610 (15.5) 1.339 (34.0) .040 (1.0) 7 22 196 92 6.9.68 940C6P68K .709 (18.0) 1.339 (34.0) .040 (1.0) 6 23 196 134 8.1

1.00 940C6W1K .827 (21.0) 1.339 (34.0) .040 (1.0) 6 24 196 196 8.91.50 940C6W1P5K .984 (25.0) 1.339 (34.0) .047 (1.2) 5 26 196 295 10.92.00 940C6W2K .925 (23.5) 1.811 (46.0) .047 (1.2) 5 31 128 255 11.83.30 940C6W3P3K 1.063 (27.0) 2.126 (54.0) .047 (1.2) 4 36 105 346 15.34.70 940C6W4P7K 1.240 (31.5) 2.126 (54.0) .047 (1.2) 4 38 105 492 16.8

850 Vdc (450 Vac).15 940C8P15K .512 (13.0) 1.339 (34.0) .040 (1.0) 8 21 713 107 5.8.22 940C8P22K .610 (15.5) 1.339 (34.0) .040 (1.0) 8 22 713 157 6.4.33 940C8P33K .709 (18.0) 1.339 (34.0) .040 (1.0) 7 23 713 235 7.5.47 940C8P47K .827 (21.0) 1.339 (34.0) .040 (1.0) 5 24 713 335 9.8.68 940C8P68K .965 (24.5) 1.339 (34.0) .047 (1.2) 4 26 713 485 12.0

1.00 940C8W1K .886 (22.5) 1.811 (46.0) .047 (1.2) 5 30 400 400 11.51.50 940C8W1P5K 1.063 (27.0) 1.811 (46.0) .047 (1.2) 4 32 400 600 14.32.00 940C8W2K 1.201 (30.5) 1.811 (46.0) .047 (1.2) 3 34 400 800 17.92.20 940C8W2P2K 1.260 (32.0) 1.811 (46.0) .047 (1.2) 3 34 400 880 18.42.50 940C8W2P5K 1.339 (34.0) 1.811 (46.0) .047 (1.2) 3 35 400 1000 19.1

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX. D MAX.

d

Metallized polypropylene

Polypropylene

DoubleMetallizedPolyester

Construction850 Vdc and Higher

Normally Stocked



Type 940C, High dV/dt, Round Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors


Typical Typical Cap. Catalog D L d ESR ESL dV/dt I peak IRMS

µF Number Inches (mm) Inches (mm) Inches (mm) milliohms nH V/µs A A

1000 Vdc (500 Vac).150 940C10P15K .591 (15.0) 1.339 (34.0) .040 (1.0) 7 22 856 128 6.7.220 940C10P22K .689 (17.5) 1.339 (34.0) .040 (1.0) 7 23 856 188 7.4.330 940C10P33K .807 (20.5) 1.339 (34.0) .040 (1.0) 6 24 856 283 8.8.470 940C10P47K .945 (24.0) 1.339 (34.0) .047 (1.2) 5 26 856 402 10.6.680 940C10P68K 1.102 (28.0) 1.339 (34.0) .047 (1.2) 5 27 856 582 11.7

1.000 940C10W1K 1.024 (26.0) 1.811 (46.0) .047 (1.2) 5 32 480 480 12.51.500 940C10W1P5K 1.220 (31.0) 1.811 (46.0) .047 (1.2) 4 34 480 720 15.62.000 940C10W2K 1.398 (35.5) 1.811 (46.0) .047 (1.2) 3 36 480 960 19.6

1200 Vdc (500 Vac).100 940C12P1K .610 (15.5) 1.339 (34.0) .040 (1.0) 9 22 1142 114 6.1.150 940C12P15K .728 (18.5) 1.339 (34.0) .040 (1.0) 7 23 1142 171 7.6.220 940C12P22K .846 (21.5) 1.339 (34.0) .040 (1.0) 7 24 1142 251 8.4.330 940C12P33K .787 (20.0) 1.811 (46.0) .040 (1.0) 7 29 640 211 9.0.470 940C12P47K .906 (23.0) 1.811 (46.0) .047 (1.2) 7 30 640 301 9.8.680 940C12P68K 1.063 (27.0) 1.811 (46.0) .047 (1.2) 6 32 640 435 11.7

1.000 940C12W1K 1.299 (33.0) 1.811 (46.0) .047 (1.2) 5 35 640 640 14.51.500 940C12W1P5K 1.378 (35.0) 2.126 (54.0) .047 (1.2) 4 39 502 754 17.9

1600 Vdc (630 Vac).100 940C16P1K .709 (18.0) 1.339 (34.0) .040 (1.0) 7 23 1427 143 7.5.150 940C16P15K .846 (21.5) 1.339 (34.0) .040 (1.0) 5 24 1427 214 9.9.220 940C16P22K 1.004 (25.5) 1.339 (34.0) .047 (1.2) 7 26 1427 314 9.3.330 940C16P33K .925 (23.5) 1.811 (46.0) .047 (1.2) 7 31 800 264 10.0.470 940C16P47K 1.083 (27.5) 1.811 (46.0) .047 (1.2) 6 32 800 376 11.8.680 940C16P68K 1.280 (32.5) 1.811 (46.0) .047 (1.2) 6 35 800 544 13.1

1.000 940C16W1K 1.535 (39.0) 1.811 (46.0) .047 (1.2) 5 37 800 800 16.21.500 940C16W1P5K 1.654 (42.0) 2.126 (54.0) .047 (1.2) 4 42 628 942 20.1

2000 Vdc (630 Vac).022 940C20S22K .453 (11.5) 1.339 (34.0) .040 (1.0) 35 6 1712 38 2.6.033 940C20S33K .531 (13.5) 1.339 (34.0) .040 (1.0) 20 21 1712 57 3.8.047 940C20S47K .591 (15.0) 1.339 (34.0) .040 (1.0) 12 22 1712 80 5.2.068 940C20S68K .689 (17.5) 1.339 (34.0) .040 (1.0) 8 23 1712 116 6.9.100 940C20P1K .827 (21.0) 1.339 (34.0) .040 (1.0) 7 24 1712 171 8.3.150 940C20P15K .768 (19.5) 1.811 (46.0) .040 (1.0) 7 29 960 144 8.9.220 940C20P22K .866 (22.0) 1.811 (46.0) .040 (1.0) 8 30 960 211 9.0.330 940C20P33K 1.063 (27.0) 1.811 (46.0) .047 (1.2) 8 32 960 317 10.1.470 940C20P47K 1.260 (32.0) 1.811 (46.0) .047 (1.2) 6 34 960 451 13.0.560 940C20P56K 1.220 (31.0) 2.126 (54.0) .047 (1.2) 7 37 754 422 12.6.680 940C20P68K 1.339 (34.0) 2.126 (54.0) .047 (1.2) 6 39 754 513 14.3

1.000 940C20W1K 1.614 (41.0) 2.126 (54.0) .047 (1.2) 5 42 754 754 17.7

3000 Vdc (750 Vac).010 940C30S1K .453 (11.5) 1.339 (34.0) .040 (1.0) 60 20 2568 26 2.0.015 940C30S15K .531 (13.5) 1.339 (34.0) .040 (1.0) 40 21 2568 39 2.7.022 940C30S22K .610 (15.5) 1.339 (34.0) .040 (1.0) 25 22 2568 57 3.6.033 940C30S33K .709 (18.0) 1.339 (34.0) .040 (1.0) 14 23 2568 85 5.3.047 940C30S47K .650 (16.5) 1.811 (46.0) .040 (1.0) 14 28 1440 68 5.7.068 940C30S68K .748 (19.0) 1.811 (46.0) .040 (1.0) 12 29 1440 98 6.7.100 940C30P1K .886 (22.5) 1.811 (46.0) .047 (1.2) 10 30 1440 144 8.1.150 940C30P15K 1.063 (27.0) 1.811 (46.0) .047 (1.2) 8 32 1440 216 10.1

Normally Stocked




Type 941C, High dV/dt, Oval Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs


Specifications

Type 941C flat, oval film capacitors usepolypropylene film and dual metallized electrodesfor both self healing properties and high peakcurrent carrying capability (dV/dt). This seriesfeatures low ESR characteristics, excellent highfrequency and high voltage capabilities.




Typical Typical Cap. Catalog T W L d ESR ESL dV/dt I peak IRMS

µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) milliohms nH V/µs A A

600 Vdc (275 Vac).10 941C6P1K .223 (5.7) .470 (11.9) 1.339 (34.0) .032 (.8) 28 17 196 20 2.8.15 941C6P15K .266 (6.8) .513 (13.0) 1.339 (34.0) .040 (1.0) 13 18 196 29 4.4.22 941C6P22K .318 (8.1) .565 (14.3) 1.339 (34.0) .040 (1.0) 12 19 196 43 4.9.33 941C6P33K .387 (9.8) .634 (16.1) 1.339 (34.0) .040 (1.0) 9 19 196 65 6.1.47 941C6P47K .462 (11.7) .709 (18.0) 1.339 (34.0) .040 (1.0) 7 20 196 92 7.6.68 941C6P68K .558 (14.2) .805 (20.4) 1.339 (34.0) .040 (1.0) 6 21 196 134 8.9

1.00 941C6W1K .680 (17.3) .927 (23.5) 1.339 (34.0) .040 (1.0) 6 23 196 196 9.91.50 941C6W1P5K .837 (21.3) 1.084 (27.5) 1.339 (34.0) .047 (1.2) 5 24 196 295 12.12.00 941C6W2K .717 (18.2) 1.088 (27.6) 1.811 (46.0) .047 (1.2) 5 28 128 255 13.13.30 941C6W3P3K .886 (22.5) 1.253 (31.8) 2.126 (54.0) .047 (1.2) 4 34 105 346 17.34.70 941C6W4P7K 1.125 (28.6) 1.311 (33.3) 2.126 (54.0) .047 (1.2) 4 36 105 492 18.7

850 Vdc (450 Vac).15 941C8P15K .378 (9.6) .625 (15.9) 1.339 (34.0) .040 (1.0) 8 19 713 107 6.4.22 941C8P22K .458 (11.6) .705 (17.9) 1.339 (34.0) .040 (1.0) 8 20 713 157 7.0.33 941C8P33K .562 (14.3) .810 (20.6) 1.339 (34.0) .040 (1.0) 7 21 713 235 8.3.47 941C8P47K .674 (17.1) .922 (23.4) 1.339 (34.0) .040 (1.0) 5 22 713 335 10.8.68 941C8P68K .815 (20.7) 1.063 (27.0) 1.339 (34.0) .047 (1.2) 4 24 713 485 13.3

1.00 941C8W1K .679 (17.2) 1.050 (26.7) 1.811 (46.0) .047 (1.2) 5 28 400 400 12.71.50 941C8W1P5K .847 (21.5) 1.218 (30.9) 1.811 (46.0) .047 (1.2) 4 30 400 600 15.82.00 941C8W2K .990 (25.1) 1.361 (34.6) 1.811 (46.0) .047 (1.2) 3 31 400 800 19.82.20 941C8W2P2K 1.042 (26.5) 1.413 (35.9) 1.811 (46.0) .047 (1.2) 3 32 400 880 20.42.50 941C8W2P5K 1.117 (28.4) 1.488 (37.8) 1.811 (46.0) .047 (1.2) 3 33 400 1000 21.2

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX.

T MAX.

d


Polypropylene



W MAX.


Type 941C, High dV/dt, Oval Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors




1000 Vdc (500 Vac).150 941C10P15K .441 (11.2) .688 (17.5) 1.339 (34.0) .040 (1.0) 7 20 856 128 7.4.220 941C10P22K .535 (13.6) .782 (19.9) 1.339 (34.0) .040 (1.0) 7 21 856 188 8.1.330 941C10P33K .658 (16.7) .906 (23.0) 1.339 (34.0) .040 (1.0) 6 22 856 283 9.7.470 941C10P47K .790 (20.1) 1.037 (26.3) 1.339 (34.0) .047 (1.2) 5 24 856 402 11.7.680 941C10P68K .955 (24.2) 1.203 (30.5) 1.339 (34.0) .047 (1.2) 5 26 856 582 13.0

1.000 941C10W1K .803 (20.4) 1.174 (29.8) 1.811 (46.0) .047 (1.2) 5 24 480 480 13.81.500 941C10W1P5K 1.001 (25.4) 1.372 (34.8) 1.811 (46.0) .047 (1.2) 4 31 480 720 17.32.000 941C10W2K 1.169 (29.7) 1.540 (39.1) 1.811 (46.0) .047 (1.2) 3 33 480 960 21.7

1200 Vdc (500 Vac).100 941C12P1K .462 (11.7) .709 (18.0) 1.339 (34.0) .040 (1.0) 9 20 1142 114 6.7.150 941C12P15K .568 (14.4) .815 (20.7) 1.339 (34.0) .040 (1.0) 7 21 1142 171 8.3.220 941C12P22K .691 (17.5) .938 (23.8) 1.339 (34.0) .040 (1.0) 7 23 1142 251 9.2.330 941C12P33K .575 (14.6) .946 (24.0) 1.811 (46.0) .040 (1.0) 7 21 640 211 10.0.470 941C12P47K .698 (17.7) 1.069 (27.1) 1.811 (46.0) .047 (1.2) 7 28 640 301 10.9.680 941C12P68K .854 (21.7) 1.225 (31.1) 1.811 (46.0) .047 (1.2) 6 30 640 435 13.0

1.000 941C12W1K 1.053 (26.7) 1.423 (36.1) 1.811 (46.0) .047 (1.2) 5 32 640 640 15.91.500 941C12W1P5K 1.088 (27.6) 1.582 (40.2) 2.126 (54.0) .047 (1.2) 4 36 502 754 19.7

1600 Vdc (630 Vac).100 941C16P1K .565 (14.3) .813 (20.6) 1.339 (34.0) .040 (1.0) 7 21 1427 143 8.3.150 941C16P15K .696 (17.7) .943 (23.9) 1.339 (34.0) .040 (1.0) 5 23 1427 214 11.0.220 941C16P22K .848 (21.5) 1.095 (27.8) 1.339 (34.0) .047 (1.2) 7 24 1427 314 10.3.330 941C16P33K .715 (18.2) 1.086 (27.6) 1.811 (46.0) .047 (1.2) 7 23 800 264 11.0.470 941C16P47K .867 (22.0) 1.238 (31.4) 1.811 (46.0) .047 (1.2) 6 30 800 376 13.1.680 941C16P68K 1.059 (26.9) 1.430 (36.3) 1.811 (46.0) .047 (1.2) 6 32 800 544 14.5

1.000 941C16W1K 1.303 (33.1) 1.674 (42.5) 1.811 (46.0) .047 (1.2) 5 35 800 800 17.91.500 941C16W1P5K 1.358 (34.5) 1.852 (47.0) 2.126 (54.0) .047 (1.2) 4 39 628 942 22.2

2000 Vdc (630 Vac).022 941C20S22K .313 (7.9) .561 (14.2) 1.339 (34.0) .040 (1.0) 35 18 1712 38 2.8.033 941C20S33K .382 (9.7) .629 (16.0) 1.339 (34.0) .040 (1.0) 20 19 1712 57 4.1.047 941C20S47K .456 (11.6) .703 (17.8) 1.339 (34.0) .040 (1.0) 12 20 1712 80 5.7.068 941C20S68K .550 (14.0) .797 (20.2) 1.339 (34.0) .040 (1.0) 8 21 1712 116 7.7.100 941C20P1K .670 (17.0) .917 (23.3) 1.339 (34.0) .040 (1.0) 7 22 1712 171 9.1.150 941C20P15K .557 (14.1) .928 (23.6) 1.811 (46.0) .040 (1.0) 7 21 960 144 9.8.220 941C20P22K .686 (17.4) 1.057 (26.8) 1.811 (46.0) .040 (1.0) 8 28 960 211 10.1.330 941C20P33K .856 (21.7) 1.227 (31.2) 1.811 (46.0) .047 (1.2) 8 30 960 317 11.3.470 941C20P47K 1.037 (26.3) 1.408 (35.8) 1.811 (46.0) .047 (1.2) 6 32 960 451 14.4.560 941C20P56K .941 (23.9) 1.436 (36.5) 2.126 (54.0) .047 (1.2) 7 31 754 422 13.9.680 941C20P68K 1.050 (26.7) 1.545 (39.2) 2.126 (54.0) .047 (1.2) 6 35 754 513 15.8

1.000 941C20W1K 1.303 (33.1) 1.797 (45.6) 2.126 (54.0) .047 (1.2) 5 38 754 754 19.4

3000 Vdc (750 Vac).010 941C30S1K .308 (7.8) .555 (14.1) 1.339 (34.0) .040 (1.0) 60 18 2568 26 2.2.015 941C30S15K .375 (9.5) .622 (15.8) 1.339 (34.0) .040 (1.0) 40 19 2568 39 2.9.022 941C30S22K .454 (11.5) .701 (17.8) 1.339 (34.0) .040 (1.0) 25 20 2568 57 4.0.033 941C30S33K .558 (14.2) .805 (20.4) 1.339 (34.0) .040 (1.0) 14 21 2568 85 5.8.047 941C30S47K .446 (11.3) .817 (20.7) 1.811 (46.0) .040 (1.0) 14 20 1440 68 6.3.068 941C30S68K .545 (13.8) .916 (23.3) 1.811 (46.0) .040 (1.0) 12 26 1440 98 7.4.100 941C30P1K .673 (17.1) 1.044 (26.5) 1.811 (46.0) .047 (1.2) 10 28 1440 144 9.0.150 941C30P15K .839 (21.3) 1.210 (30.7) 1.811 (46.0) .047 (1.2) 8 30 1440 216 11.2




Type 942C, Very High dV/dt, Round Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs

Foil/Metallized HybridAxial Leads

Specifications

Type 942C round, axial film capacitors utilize ahybrid section design of polypropylene film, metalfoils and metallized polypropylene dielectric toachieve both high peak current as well as superiorrms current ratings. This series is ideal for highpulse operation and high peak current circuits.








1.00 942C8W1K 1.102 (28.0) 1.811 (46.0) .047 (1.2) 5 32 960 960 13.11.50 942C8W1P5K 1.142 (29.0) 2.126 (54.0) .047 (1.2) 4 36 754 1131 15.92.00 942C8W2K 1.161 (29.5) 2.520 (64.0) .047 (1.2) 3 41 574 1148 19.9


Polypropylene

FoilConstruction

600 Vdc and Higher

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX. D MAX.

d

Normally Stocked



Type 942C, Very High dV/dt, Round Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors





1.000 942C10W1K 1.181 (30.0) 2.126 (54.0) .047 (1.2) 5 37 1005 1005 14.61.400 942C10W1P4K 1.240 (31.5) 2.520 (64.0) .047 (1.2) 4 41 765 1071 17.9

1200 Vdc (430 Vac).100 942C12P1K .748 (19.0) 1.339 (34.0) .040 (1.0) 5 23 2854 285 9.2.150 942C12P15K .887 (22.5) 1.339 (34.0) .040 (1.0) 5 24 2854 428 10.2.220 942C12P22K 1.043 (26.5) 1.339 (34.0) .047 (1.2) 6 26 2854 628 10.3.330 942C12P33K .965 (24.5) 1.811 (46.0) .047 (1.2) 6 31 1600 528 11.0.470 942C12P47K 1.142 (29.0) 1.811 (46.0) .047 (1.2) 5 32 1600 752 13.4.680 942C12P68K 1.201 (30.5) 2.126 (54.0) .047 (1.2) 5 37 1256 854 14.7.900 942C12P9K 1.220 (31.0) 2.520 (64.0) .047 (1.2) 5 41 957 861 15.9



Normally Stocked




Type 943C, Very High dV/dt, Oval Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs


Specifications

Type 943C oval, axial film capacitors utilize ahybrid section design of polypropylene film, metalfoils and metallized polypropylene dielectric toachieve both high peak current as well as superiorrms current ratings. This series is ideal for highpulse operation and high peak current circuits.






1.00 943C6W1K .758 (19.2) 1.128 (28.6) 1.811 (46.0) .047 (1.2) 5 28 800 800 13.41.50 943C6W1P5K .926 (23.5) 1.296 (32.9) 1.811 (46.0) .047 (1.2) 4 30 800 1200 16.62.00 943C6W2K .947 (24.0) 1.318 (33.5) 2.126 (54.0) .047 (1.2) 3 33 628 1256 20.62.20 943C6W2P2K .993 (25.2) 1.364 (34.6) 2.126 (54.0) .047 (1.2) 3 34 628 1382 21.12.50 943C6W2P5K 1.063 (27.0) 1.437 (36.5) 2.126 (54.0) .047 (1.2) 3 35 628 1570 21.9

850 Vdc (360 Vac).15 943C8P15K .548 (13.9) .733 (18.6) 1.339 (34.0) .040 (1.0) 5 20 1712 257 9.4.22 943C8P22K .644 (16.4) .829 (21.0) 1.339 (34.0) .040 (1.0) 7 21 1712 377 8.7.33 943C8P33K .769 (19.5) .954 (24.2) 1.339 (34.0) .040 (1.0) 6 23 1712 565 10.3.47 943C8P47K .902 (22.9) 1.087 (27.6) 1.339 (34.0) .047 (1.2) 5 24 1712 805 12.4.68 943C8P68K 1.068 (27.1) 1.254 (31.8) 1.339 (34.0) .047 (1.2) 4 26 1712 1164 15.3

1.00 943C8W1K .882 (22.4) 1.252 (31.8) 1.811 (46.0) .047 (1.2) 5 29 960 960 14.51.50 943C8W1P5K .956 (24.3) 1.327 (33.7) 2.126 (54.0) .047 (1.2) 4 34 754 1131 18.02.00 943C8W2K .972 (24.7) 1.346 (34.2) 2.520 (64.0) .047 (1.2) 3 38 574 1147 22.4

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX.

T MAX.

d

W MAX.


Polypropylene

Foil




Type 943C, Very High dV/dt, Oval Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors




1000 Vdc (400 Vac).100 943C10P1K .569 (14.4) .755 (19.2) 1.339 (34.0) .040 (1.0) 8 20 2283 228 7.6.150 943C10P15K .677 (17.2) .862 (21.9) 1.339 (34.0) .040 (1.0) 7 22 2283 342 8.9.220 943C10P22K .802 (20.4) .987 (25.1) 1.339 (34.0) .040 (1.0) 6 23 2283 502 10.6.330 943C10P33K .654 (16.6) 1.025 (26.0) 1.811 (46.0) .040 (1.0) 5 27 1280 422 12.5.470 943C10P47K .777 (19.7) 1.148 (29.1) 1.811 (46.0) .047 (1.2) 5 28 1280 601 13.6.680 943C10P68K .933 (23.7) 1.304 (33.1) 1.811 (46.0) .047 (1.2) 5 30 1280 870 14.9

1.000 943C10W1K 1.002 (25.4) 1.373 (34.9) 2.126 (54.0) .047 (1.2) 5 34 1005 1005 16.51.400 943C10W1P4K 1.035 (26.3) 1.417 (36.0) 2.520 (64.0) .047 (1.2) 4 39 765 1071 20.1

1200 Vdc (430 Vac).100 943C12P1K .675 (17.1) .860 (21.8) 1.339 (34.0) .040 (1.0) 5 22 2854 285 10.5.150 943C12P15K .807 (20.5) .992 (25.2) 1.339 (34.0) .040 (1.0) 5 23 2854 428 11.6.220 943C12P22K .960 (24.4) 1.145 (29.1) 1.339 (34.0) .047 (1.2) 6 25 2854 628 11.7.330 943C12P33K .794 (20.2) 1.165 (29.6) 1.811 (46.0) .047 (1.2) 6 28 1600 528 12.5.470 943C12P47K .946 (24.0) 1.317 (33.4) 1.811 (46.0) .047 (1.2) 5 30 1600 752 15.0.680 943C12P68K 1.008 (25.6) 1.379 (35.0) 2.126 (54.0) .047 (1.2) 5 36 1256 854 16.5.900 943C12P9K 1.012 (25.7) 1.383 (35.1) 2.520 (64.0) .047 (1.2) 5 39 956 860 17.7

1600 Vdc (460 Vac).022 943C16S22K .416 (10.6) .602 (15.3) 1.339 (34.0) .040 (1.0) 27 19 3425 75 3.5.033 943C16S33K .487 (12.4) .673 (17.1) 1.339 (34.0) .040 (1.0) 14 20 3425 113 5.3.047 943C16S47K .563 (14.3) .748 (19.0) 1.339 (34.0) .040 (1.0) 8 20 3425 161 7.6.068 943C16S68K .659 (16.7) .844 (21.4) 1.339 (34.0) .040 (1.0) 6 21 3425 233 9.5.100 943C16P1K .780 (19.8) .966 (24.5) 1.339 (34.0) .040 (1.0) 4 23 3425 342 12.8.150 943C16P15K .636 (16.1) 1.006 (25.5) 1.811 (46.0) .040 (1.0) 5 26 1919 288 12.3.220 943C16P22K .765 (19.4) 1.136 (28.8) 1.811 (46.0) .040 (1.0) 5 28 1919 422 13.5.330 943C16P33K .935 (23.7) 1.306 (33.2) 1.811 (46.0) .047 (1.2) 5 30 1919 633 14.9.470 943C16P47K .989 (25.1) 1.360 (34.5) 2.126 (54.0) .047 (1.2) 5 34 1507 708 16.3.560 943C16P56K .957 (24.3) 1.327 (33.7) 2.520 (64.0) .047 (1.2) 5 38 1147 642 17.2.680 943C16P68K 1.047 (26.6) 1.417 (36.0) 2.520 (64.0) .047 (1.2) 5 40 1147 780 18.0






CORNELLDUBILIER


Film

Capa

cito

rs

Metallized Motor RunAxial Leads HID Lighting

Specifications

Type 950 axial-leaded, metallized polypropylenecapacitors with high capacitance values are idealfor high intensity discharge lighting and motor runapplications. Flame retardant outer wrap and epoxyend seals provide moisture resistance. Type 950features operating temperatures to 90°C withoutderating and very low ESR characteristics. Thisnon-protected film capacitor has UnderwritersLaboratories, Inc. recognition for construction only.U.L. File Number assigned is E128034(N).

Voltage Range: 250 VacCapacitance Range: 5-150 µFCapacitance Tolerance: ±10% (K) standard

±6% (H) optionalOperating Temperature Range: -55°C to 90°C

Dielectric Strength: 160% (1 minute)Dissipation Factor: .15% Max. @ 120 HZInsulation Resistance: 100,000 M x µFLife Test: 1,000 Hours at 90°C at 125% Rated Voltage


RatedVolts 1.750 2.550


250 9 6

1.625”MIN.

L+.125-.063

1.625”MIN.

SOLID LEADS #18 AWG (.040 DIA.)

FLEXIBLE LEADS #18 AWG (.040 DIA.)

18 AWG

18 AWG

D+ .125

6.0”MIN.

6.0”MIN.

L+.125-.063

D+ .125




CORNELLDUBILIER


FilmCapacitors

Catalog Catalog Cap. Number Number D L

µF Solid Leads Flexible Leads Inches (mm) Inches (mm)250 Vac

5.0 950CQW5K 950FQW5K .906 (23.0) 1.752 (44.5)7.0 950CQW7K 950FQW7K 1.035 (26.3) 1.755 (44.5)8.0 950CQW8K 950FQW8K 1.094 (27.8) 1.752 (44.5)

10.0 950CQW10K 950FQW10K .996 (25.3) 2.500 (63.5)12.0 950CQW12K 950FQW12K 1.075 (27.3) 2.500 (63.5)13.0 950CQW13K 950FQW13K 1.110 (28.2) 2.500 (63.5)14.0 950CQW14K 950FQW14K 1.146 (29.1) 2.500 (63.5)15.0 950CQW15K 950FQW15K 1.181 (30.0) 2.500 (63.5)16.0 950CQW16K 950FQW16K 1.213 (30.8) 2.500 (63.5)17.0 950CQW17K 950FQW17K 1.248 (31.7) 2.500 (63.5)17.5 950CQW17P5K 950FQW17P5K 1.264 (32.1) 2.500 (63.5)20.0 950CQW20K 950FQW20K 1.339 (34.0) 2.500 (63.5)22.5 950CQW22P5K 950FQW22P5K 1.413 (35.9) 2.500 (63.5)24.0 950CQW24K 950FQW24K 1.457 (37.0) 2.500 (63.5)26.0 950CQW26K 950FQW26K 1.508 (38.3) 2.500 (63.5)28.0 950CQW28K 950FQW28K 1.559 (39.6) 2.500 (63.5)30.0 950CQW30K 950FQW30K 1.610 (40.9) 2.500 (63.5)32.0 950CQW32K 950FQW32K 1.575 (40.0) 2.894 (73.5)34.0 950CQW34K 950FQW34K 1.614 (41.0) 2.894 (73.5)35.0 950CQW35K 950FQW35K 1.654 (42.0) 2.894 (73.5)36.0 950CQW36K 950FQW36K 1.693 (43.0) 2.894 (73.5)40.0 950CQW40K 950FQW40K 1.713 (43.5) 2.894 (73.5)42.0 950CQW42K 950FQW42K 1.752 (44.5) 2.894 (73.5)45.0 950CQW45K 950FQW45K 1.811 (46.0) 2.894 (73.5)48.0 950CQW48K 950FQW48K 1.850 (47.0) 2.894 (73.5)

Cap. D LµF Solid Leads Flexible Leads Inches (mm) Inches (mm)

250 Vac (cont’d)50.0 950CQW50K 950FQW50K 1.890 (48.0) 2.894 (73.5)52.0 950CQW52K 950FQW52K 1.969 (50.0) 2.894 (73.5)55.0 950CQW55K 950FQW55K 2.008 (51.0) 2.894 (73.5)56.0 950CQW56K 950FQW56K 2.028 (51.5) 2.894 (73.5)60.0 950CQW60K 950FQW60K 1.890 (48.0) 3.386 (86.0)65.0 950CQW65K 950FQW65K 1.929 (49.0) 3.386 (86.0)68.0 950CQW68K 950FQW68K 2.008 (51.0) 3.386 (86.0)70.0 950CQW70K 950FQW70K 2.047 (52.0) 3.386 (86.0)72.0 950CQW72K 950FQW72K 2.087 (53.0) 3.386 (86.0)75.0 950CQW75K 950FQW75K 2.126 (54.0) 3.386 (86.0)78.0 950CQW78K 950FQW78K 2.146 (54.5) 3.386 (86.0)80.0 950CQW80K 950FQW80K 2.165 (55.0) 3.386 (86.0)82.0 950CQW82K 950FQW82K 2.185 (55.5) 3.386 (86.0)85.0 950CQW85K 950FQW85K 2.224 (56.5) 3.386 (86.0)90.0 950CQW90K 950FQW90K 1.969 (50.0) 4.409 (112.0)92.0 950CQW92K 950FQW92K 2.008 (51.0) 4.409 (112.0)95.0 950CQW95K 950FQW95K 2.047 (52.0) 4.409 (112.0)

100.0 950CQW100K 950FQW100K 2.087 (53.0) 4.409 (112.0)105.0 950CQW105K 950FQW105K 2.126 (54.0) 4.409 (112.0)110.0 950CQW110K 950FQW110K 2.185 (55.5) 4.409 (112.0)115.0 950CQW115K 950FQW115K 2.224 (56.5) 4.409 (112.0)120.0 950CQW120K 950FQW120K 2.283 (58.0) 4.409 (112.0)

Catalog CatalogNumber Number

125.0 950CQW125K 950FQW125K 2.323 (59.0) 4.409 (112.0)130.0 950CQW130K 950FQW130K 2.362 (60.0) 4.409 (112.0)135.0 950CQW135K 950FQW135K 2.362 (60.0) 4.409 (112.0)140.0 950CQW140K 950FQW140K 2.362 (60.0) 4.409 (112.0)145.0 950CQW145K 950FQW145K 2.362 (60.0) 4.409 (112.0)150.0 950CQW150K 950FQW150K 2.402 (61.0) 4.409 (112.0)





Type DPP, Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs


RatedVolts .630 .790-.940 ≥1.020

dV/dt—volts per microsecond, maximum100 4200 4000 1900250 6900 4100 2400400 19000 10000 3200630 60000 20000 6700

Film/Foil High FrequencyRadial Leads Precise Values

Specifications

Type DPP radial-leaded, polypropylene film/foilcapacitors are non-inductively wound. Very lowdissipation factor and high insulation resistancecontribute to excellent performance and long-termstability characteristics. Low ESR, DF and itsinherent stability make Type DPP an ideal choicefor tight tolerance, pulse and high-frequencyapplications.






Cap. Catalog T Max. H Max. L Max. S ±.06 (±1.5) d ±.05µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

100 Vdc (70 Vac).033 DPP1S33K .315 (8.0) .532 (13.5) .768 (19.5) .591 (15.0) .024 (.6).047 DPP1S47K .335 (8.5) .610 (15.5) .768 (19.5) .591 (15.0) .024 (.6).068 DPP1S68K .374 (9.5) .650 (16.5) .788 (20.0) .591 (15.0) .024 (.6).100 DPP1P1K .394 (10.0) .670 (17.0) 1.024 (26.0) .788 (20.0) .024 (.6).150 DPP1P15K .433 (11.0) .748 (19.0) 1.024 (26.0) .788 (20.0) .032 (.8).220 DPP1P22K .512 (13.0) .748 (19.0) 1.024 (26.0) .788 (20.0) .032 (.8).330 DPP1P33K .551 (14.0) .827 (21.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).470 DPP1P47K .630 (16.0) .945 (24.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

250 Vdc (140 Vac).010 DPP2S1K .276 (7.0) .473 (12.0) .591 (15.0) .394 (10.0) .024 (.6).015 DPP2S15K .295 (7.5) .473 (12.0) .591 (15.0) .394 (10.0) .024 (.6).022 DPP2S22K .315 (8.0) .512 (13.0) .591 (15.0) .394 (10.0) .024 (.6).033 DPP2S33K .335 (8.5) .551 (14.0) .788 (20.0) .591 (15.0) .024 (.6).047 DPP2S47K .354 (9.0) .630 (16.0) .788 (20.0) .591 (15.0) .024 (.6).068 DPP2S68K .433 (11.0) .630 (16.0) .788 (20.0) .591 (15.0) .024 (.6).100 DPP2P1K .394 (10.0) .709 (18.0) 1.024 (26.0) .788 (20.0) .032 (.8).150 DPP2P15K .473 (12.0) .866 (22.0) 1.024 (26.0) .788 (20.0) .032 (.8).220 DPP2P22K .551 (14.0) .945 (24.0) 1.024 (26.0) .788 (20.0) .032 (.8).330 DPP2P33K .591 (15.0) .985 (25.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).470 DPP2P47K .630 (16.0) 1.063 (27.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

L T

d

H

S

.12”MAX.

(3.0mm).79”MIN.

(20mm)



Type DPP, Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors


Cap. Catalog T Max. H Max. L Max. S ±.06 (±1.5) d ±.05µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

400 Vdc (250 Vac).0100 DPP4S1K .335 (8.5) .551 (14.0) .591 (15.0) .394 (10.0) .024 (.6).0150 DPP4S15K .354 (9.0) .591 (15.0) .591 (15.0) .394 (10.0) .024 (.6).0220 DPP4S22K .394 (10.0) .670 (17.0) .768 (19.5) .591 (15.0) .024 (.6).0330 DPP4S33K .394 (10.0) .670 (17.0) .768 (19.5) .591 (15.0) .024 (.6).0470 DPP4S47K .354 (9.0) .630 (16.0) 1.024 (26.0) .788 (20.0) .032 (.8).0680 DPP4S68K .433 (11.0) .709 (18.0) 1.024 (26.0) .788 (20.0) .032 (.8).1000 DPP4P1K .473 (12.0) .788 (20.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).1500 DPP4P15K .473 (12.0) .906 (23.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

630 Vdc (250 Vac).0010 DPP6D1K .256 (6.5) .492 (12.5) .591 (15.0) .394 (10.0) .024 (.6).0015 DPP6D15K .276 (7.0) .492 (12.5) .591 (15.0) .394 (10.0) .024 (.6).0022 DPP6D22K .276 (7.0) .492 (12.5) .591 (15.0) .394 (10.0) .024 (.6).0033 DPP6D33K .295 (7.5) .473 (12.0) .768 (19.5) .591 (15.0) .024 (.6).0047 DPP6D47K .315 (8.0) .492 (12.5) .768 (19.5) .591 (15.0) .024 (.6).0068 DPP6D68K .354 (9.0) .551 (14.0) .768 (19.5) .591 (15.0) .024 (.6).0100 DPP6S1K .354 (9.0) .551 (14.0) 1.024 (26.0) .788 (20.0) .024 (.6).0150 DPP6S15K .394 (10.0) .630 (16.0) 1.024 (26.0) .788 (20.0) .024 (.6).0220 DPP6S22K .433 (11.0) .670 (17.0) 1.024 (26.0) .788 (20.0) .024 (.6).0330 DPP6S33K .433 (11.0) .670 (17.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).0470 DPP6S47K .492 (12.5) .748 (19.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).0680 DPP6S68K .551 (14.0) .866 (22.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).1000 DPP6P1K .512 (13.0) .866 (22.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)




Type DPFF, Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs


RatedVolts .700-.750 .900-.950 1.250-1.300 1.650-1.700

dV/dt—volts per microsecond, maximum200 4600 2400 1400 720400 6000 3200 1800 840600 8000 6600 2800 1200800 6000 3200

1200 6800 32001600 11600 6000

Film/Foil High AC Current Pulse andRadial Leads Resonant Applications

Specifications

Type DPFF radial-leaded, polypropylene film/foilcapacitors feature single-section extended foilconstruction for 200 Vdc through 600 Vdc andseries wound extended foil with a floating commonmetallized film for 800 Vdc through 1600 Vdc.Excellent temperature stability to 105°C and lowloss characteristics make Type DPFF ideal for highAC current and pulse applications.

Voltage Range: 200-1600 Vdc (155-500 Vac)Capacitance Range: .0018-.47 µFCapacitance Tolerance: ±5% (J) standard

±10% (K) optionalOperating Temperature Range: -55°C to 105°C**Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 105°C

Dielectric Strength: 250% (800 Vdc and less)200% (1200 and 1600 Vdc)

Dissipation Factor: .10% Max. (25°C, 1kHz)Insulation Resistance: 200,000 M Min.Life Test: 500 Hours at 85°C at 125% Rated Voltage

Ratings and Dimensions Cap. Catalog D H L S


200/250 Vdc (155 Vac).0120 DPFF2S12J .26 (6.6) .32 (8.1) .70 (17.8) .374 (9.5).0150 DPFF2S15J .37 (9.4) .37 (9.4) .75 (19.1) .374 (9.5).0150 DPFF2S15JS .28 (7.1) .34 (8.6) .70 (17.8) .374 (9.5).0180 DPFF2S18J .29 (7.4) .35 (8.9) .70 (17.8) .374 (9.5).0220 DPFF2S22J .42 (10.7) .42 (10.7) .75 (19.1) .374 (9.5).0220 DPFF2S22JS .31 (7.9) .37 (9.4) .70 (17.8) .374 (9.5).0270 DPFF2S27J .33 (8.4) .39 (9.9) .70 (17.8) .374 (9.5).0330 DPFF2S33J .42 (10.7) .42 (10.7) .75 (19.1) .374 (9.5).0330 DPFF2S33JS .36 (9.1) .42 (10.7) .70 (17.8) .374 (9.5).0390 DPFF2S39J .32 (8.1) .38 (9.7) .90 (22.9) .374 (9.5).0470 DPFF2S47J .40 (10.2) .40 (10.2) .95 (24.1) .374 (9.5).0470 DPFF2S47JS .34 (8.6) .40 (10.2) .90 (22.9) .374 (9.5).0560 DPFF2S56J .37 (9.4) .43 (10.9) .90 (22.9) .374 (9.5).0680 DPFF2S68J .45 (11.4) .45 (11.4) .95 (24.1) .374 (9.5).0680 DPFF2S68JS .39 (9.9) .45 (11.4) .90 (22.9) .374 (9.5).0820 DPFF2S82J .36 (9.1) .42 (10.7) 1.25 (31.8) .374 (9.5).1000 DPFF2P1J .45 (11.4) .45 (11.4) 1.25 (31.8) .720 (18.3).1000 DPFF2P1JS .38 (9.7) .44 (11.2) 1.25 (31.8) .720 (18.3).1200 DPFF2P12J .41 (10.4) .47 (11.9) 1.25 (31.8) .720 (18.3).1500 DPFF2P15J .55 (14.0) .55 (14.0) 1.30 (33.0) .720 (18.3).1500 DPFF2P15JS .44 (11.2) .50 (12.7) 1.25 (31.8) .720 (18.3).1800 DPFF2P18J .47 (11.9) .53 (13.5) 1.25 (31.8) .720 (18.3).2200 DPFF2P22J .62 (15.7) .62 (15.7) 1.30 (33.0) .720 (18.3)

Cap. Catalog D H L SµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm)

200/250 Vdc (155 Vac) (cont’d).2200 DPFF2P22JS .51 (13.0) .57 (14.5) 1.25 (31.8) .720 (18.3).2700 DPFF2P27J .49 (12.4) .55 (14.0) 1.65 (41.9) 1.095 (27.8).3300 DPFF2P33J .65 (16.5) .65 (16.5) 1.65 (41.9) 1.095 (27.8).3300 DPFF2P33JS .53 (13.5) .59 (15.0) 1.65 (41.9) 1.095 (27.8).3900 DPFF2P39J .56 (14.2) .62 (15.7) 1.65 (41.9) 1.095 (27.8).4700 DPFF2P47J .75 (19.1) .75 (19.1) 1.70 (43.2) 1.095 (27.8).4700 DPFF2P47JS .60 (15.2) .66 (16.8) 1.65 (41.9) 1.095 (27.8)

400 Vdc (200 Vac).0039 DPFF4D39J .34 (8.6) .38 (9.7) .70 (17.8) .374 (9.5).0047 DPFF4D47J .34 (8.6) .38 (9.7) .70 (17.8) .374 (9.5).0056 DPFF4D56J .36 (9.1) .40 (10.2) .70 (17.8) .374 (9.5).0068 DPFF4D68J .29 (7.4) .35 (8.9) .70 (17.8) .374 (9.5).0082 DPFF4D82J .30 (7.6) .36 (9.1) .70 (17.8) .374 (9.5).0100 DPFF4S1J .30 (7.6) .36 (9.1) .70 (17.8) .374 (9.5).0120 DPFF4S12J .32 (8.1) .38 (9.7) .70 (17.8) .374 (9.5).0150 DPFF4S15J .45 (11.4) .45 (11.4) .75 (19.1) .374 (9.5).0150 DPFF4S15JS .34 (8.6) .40 (10.2) .70 (17.8) .374 (9.5).0180 DPFF4S18J .31 (7.9) .37 (9.4) .90 (22.9) .374 (9.5).0220 DPFF4S22J .33 (8.4) .39 (9.9) .90 (22.9) .374 (9.5).0270 DPFF4S27J .36 (9.1) .42 (10.7) .90 (22.9) .374 (9.5).0330 DPFF4S33J .50 (12.7) .50 (12.7) .95 (24.1) .374 (9.5).0330 DPFF4S33JS .38 (9.7) .44 (11.2) .90 (22.9) .374 (9.5).0390 DPFF4S39J .35 (8.9) .41 (10.4) 1.25 (31.8) .720 (18.3)

LMAX.

1.18”MIN.

(30mm)

DMAX.

HMAX.

.250 MAX.

.032 (.8)TINNED COPPER

S±.06 (±1.5)

Normally Stocked



Type DPFF, Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors



400 Vdc (200 Vac) (cont’d).0470 DPFF4S47J .37 (9.4) .43 (10.9) 1.25 (31.8) .720 (18.3).0560 DPFF4S56J .39 (9.9) .45 (11.4) 1.25 (31.8) .720 (18.3).0680 DPFF4S68J .42 (10.7) .48 (12.2) 1.25 (31.8) .720 (18.3).0820 DPFF4S82J .45 (11.4) .51 (13.0) 1.25 (31.8) .720 (18.3).1000 DPFF4P1J .48 (12.2) .54 (13.7) 1.25 (31.8) .720 (18.3).1200 DPFF4P12J .52 (13.2) .58 (14.7) 1.25 (31.8) .720 (18.3).1500 DPFF4P15J .65 (16.5) .65 (16.5) 1.30 (33.0) .720 (18.3).1500 DPFF4P15JS .56 (14.2) .62 (15.7) 1.25 (31.8) .720 (18.3).1800 DPFF4P18J .54 (13.7) .60 (15.2) 1.65 (41.9) 1.095 (27.8).2200 DPFF4P22J .70 (17.8) .70 (17.8) 1.70 (43.2) 1.095 (27.8).2200 DPFF4P22JS .58 (14.7) .64 (16.3) 1.65 (41.9) 1.095 (27.8).2700 DPFF4P27J .63 (16.0) .69 (17.5) 1.65 (41.9) 1.095 (27.8).3300 DPFF4P33J .80 (20.3) .80 (20.3) 1.70 (43.2) 1.095 (27.8).3300 DPFF4P33JS .70 (17.8) .76 (19.3) 1.65 (41.9) 1.095 (27.8).3900 DPFF4P39J .75 (19.1) .81 (20.6) 1.65 (41.9) 1.095 (27.8).4700 DPFF4P47J .90 (22.9) .90 (22.9) 1.70 (43.2) 1.095 (27.8).4700 DPFF4P47JS .82 (20.8) .88 (22.4) 1.65 (41.9) 1.095 (27.8)

600/630 Vdc (200 Vac).0010 DPFF6D1J .35 (8.9) .39 (9.9) .70 (17.8) .374 (9.5).0012 DPFF6D12J .36 (9.1) .40 (10.2) .70 (17.8) .374 (9.5).0015 DPFF6D15J .40 (10.2) .40 (10.2) .75 (19.1) .374 (9.5).0015 DPFF6D15JS .32 (8.1) .36 (9.1) .70 (17.8) .374 (9.5).0018 DPFF6D18J .34 (8.6) .38 (9.7) .70 (17.8) .374 (9.5).0022 DPFF6D22J .33 (8.4) .37 (9.4) .70 (17.8) .374 (9.5).0027 DPFF6D27J .35 (8.9) .39 (9.9) .70 (17.8) .374 (9.5).0033 DPFF6D33J .40 (10.2) .40 (10.2) .75 (19.1) .374 (9.5).0033 DPFF6D33JS .32 (8.1) .36 (9.1) .70 (17.8) .374 (9.5).0039 DPFF6D39J .34 (8.6) .38 (9.7) .70 (17.8) .374 (9.5).0047 DPFF6D47J .45 (11.4) .45 (11.4) .75 (19.1) .374 (9.5).0047 DPFF6D47JS .34 (8.6) .38 (9.7) .70 (17.8) .374 (9.5).0056 DPFF6D56J .36 (9.1) .40 (10.2) .70 (17.8) .374 (9.5).0068 DPFF6D68J .45 (11.4) .45 (11.4) .75 (19.1) .374 (9.5).0068 DPFF6D68JS .38 (9.7) .42 (10.7) .70 (17.8) .374 (9.5).0082 DPFF6D82J .34 (8.6) .38 (9.7) .90 (22.9) .374 (9.5).0100 DPFF6S1J .45 (11.4) .45 (11.4) .95 (24.1) .374 (9.5).0100 DPFF6S1JS .36 (9.1) .40 (10.2) .90 (22.9) .374 (9.5).0120 DPFF6S12J .38 (9.7) .42 (10.7) .90 (22.9) .374 (9.5).0150 DPFF6S15J .50 (12.7) .50 (12.7) .95 (24.1) .374 (9.5).0150 DPFF6S15JS .42 (10.7) .46 (11.7) .90 (22.9) .374 (9.5).0180 DPFF6S18J .44 (11.2) .48 (12.2) .90 (22.9) .374 (9.5).0220 DPFF6S22J .55 (14.0) .55 (14.0) .95 (24.1) .374 (9.5).0220 DPFF6S22JS .48 (12.2) .52 (13.2) .90 (22.9) .374 (9.5).0270 DPFF6S27J .55 (14.0) .55 (14.0) 1.30 (33.0) .720 (18.3).0270 DPFF6S27JS .43 (10.9) .47 (11.9) 1.25 (31.8) .720 (18.3).0330 DPFF6S33J .46 (11.7) .50 (12.7) 1.25 (31.8) .720 (18.3).0390 DPFF6S39J .49 (12.4) .53 (13.5) 1.25 (31.8) .720 (18.3).0470 DPFF6S47J .52 (13.2) .56 (14.2) 1.25 (31.8) .720 (18.3).0560 DPFF6S56J .56 (14.2) .60 (15.2) 1.25 (31.8) .720 (18.3).0680 DPFF6S68J .65 (16.5) .65 (16.5) 1.30 (33.0) .720 (18.3).0680 DPFF6S68JS .60 (15.2) .64 (16.3) 1.25 (31.8) .720 (18.3).0820 DPFF6S82J .65 (16.5) .69 (17.5) 1.25 (31.8) .720 (18.3).1000 DPFF6P1J .75 (19.0) .75 (19.1) 1.30 (33.0) .720 (18.3).1000 DPFF6P1JS .71 (18.0) .75 (19.1) 1.25 (31.8) .720 (18.3).1200 DPFF6P12J .65 (16.5) .69 (17.5) 1.65 (41.9) 1.095 (27.8).1500 DPFF6P15J .75 (19.0) .75 (19.1) 1.70 (43.2) 1.095 (27.8).1500 DPFF6P15JS .71 (18.0) .75 (19.1) 1.65 (41.9) 1.095 (27.8).1800 DPFF6P18J .77 (19.6) .81 (20.6) 1.65 (41.9) 1.095 (27.8).2200 DPFF6P22J .85 (21.6) .85 (21.6) 1.70 (43.2) 1.095 (27.8).2200 DPFF6P22JS .83 (21.1) .85 (21.6) 1.65 (41.9) 1.095 (27.8)

800 Vdc (450 Vac).0056 DPFF8D56J .50 (12.7) .50 (12.7) 1.30 (33.0) .720 (18.3).0056 DPFF8D56JS .28 (7.1) .34 (8.6) 1.25 (31.8) .720 (18.3).0068 DPFF8D68J .29 (7.4) .35 (8.9) 1.25 (31.8) .720 (18.3).0082 DPFF8D82J .31 (7.9) .37 (9.4) 1.25 (31.8) .720 (18.3).0100 DPFF8S1J .50 (12.7) .50 (12.7) 1.30 (33.0) .720 (18.3)


800 Vdc (450 Vac) (cont’d).0100 DPFF8S1JS .33 (8.4) .39 (9.9) 1.25 (31.8) .720 (18.3).0120 DPFF8S12J .55 (14.0) .55 (14.0) 1.30 (33.0) .720 (18.3).0120 DPFF8S12JS .35 (8.9) .41 (10.4) 1.25 (31.8) .720 (18.3).0150 DPFF8S15J .55 (14.0) .55 (14.0) 1.30 (33.0) .720 (18.3).0150 DPFF8S15JS .38 (9.7) .44 (11.2) 1.25 (31.8) .720 (18.3).0180 DPFF8S18J .41 (10.4) .47 (11.9) 1.25 (31.8) .720 (18.3).0220 DPFF8S22J .60 (15.2) .60 (15.2) 1.30 (33.0) .720 (18.3).0220 DPFF8S22JS .44 (11.2) .50 (12.7) 1.25 (31.8) .720 (18.3).0270 DPFF8S27J .47 (11.9) .53 (13.5) 1.25 (31.8) .720 (18.3).0330 DPFF8S33J .51 (13.0) .70 (17.8) 1.30 (33.0) .720 (18.3).0330 DPFF8S33JS .51 (13.0) .57 (14.5) 1.25 (31.8) .720 (18.3).0390 DPFF8S39J .47 (11.9) .53 (13.5) 1.65 (41.9) 1.095 (27.8).0470 DPFF8S47J .50 (12.7) .56 (14.2) 1.65 (41.9) 1.095 (27.8).0560 DPFF8S56J .53 (13.5) .59 (15.0) 1.65 (41.9) 1.095 (27.8).0680 DPFF8S68J .80 (20.3) .80 (20.3) 1.70 (43.2) 1.095 (27.8).0680 DPFF8S68JS .58 (14.7) .64 (16.3) 1.65 (41.9) 1.095 (27.8).0820 DPFF8S82J .62 (15.7) .68 (17.3) 1.65 (41.9) 1.095 (27.8).1000 DPFF8P1J .90 (22.9) .90 (22.9) 1.70 (43.2) 1.095 (27.8).1000 DPFF8P1JS .67 (17.0) .73 (18.5) 1.65 (41.9) 1.095 (27.8)

1200 Vdc (475 Vac).0027 DPFF12D27J .38 (9.7) .42 (10.7) 1.25 (31.8) .720 (18.3).0033 DPFF12D33J .32 (8.1) .38 (9.7) 1.25 (31.8) .720 (18.3).0039 DPFF12D39J .34 (8.6) .40 (10.2) 1.25 (31.8) .720 (18.3).0047 DPFF12D47J .36 (9.1) .42 (10.7) 1.25 (31.8) .720 (18.3).0056 DPFF12D56J .38 (9.7) .44 (11.2) 1.25 (31.8) .720 (18.3).0068 DPFF12D68J .41 (10.4) .47 (11.9) 1.25 (31.8) .720 (18.3).0082 DPFF12D82J .44 (11.2) .50 (12.7) 1.25 (31.8) .720 (18.3).0100 DPFF12S1J .47 (11.9) .53 (13.5) 1.25 (31.8) .720 (18.3).0120 DPFF12S12J .51 (13.0) .57 (14.5) 1.25 (31.8) .720 (18.3).0150 DPFF12S15J .65 (16.5) .65 (16.5) 1.30 (33.0) .720 (18.3).0150 DPFF12S15JS .55 (14.0) .61 (15.5) 1.25 (31.8) .720 (18.3).0180 DPFF12S18J .50 (12.7) .56 (14.2) 1.65 (41.9) 1.095 (27.8).0220 DPFF12S22J .54 (13.7) .60 (15.2) 1.65 (41.9) 1.095 (27.8).0270 DPFF12S27J .59 (15.0) .65 (16.5) 1.65 (41.9) 1.095 (27.8).0330 DPFF12S33J .64 (16.3) .70 (17.8) 1.65 (41.9) 1.095 (27.8).0390 DPFF12S39J .85 (21.6) .85 (21.6) 1.70 (43.2) 1.095 (27.8).0390 DPFF12S39JS .68 (17.3) .74 (18.8) 1.65 (41.9) 1.095 (27.8).0470 DPFF12S47J .74 (18.8) .80 (20.3) 1.65 (41.9) 1.095 (27.8)

1600 Vdc (500 Vac).0010 DPFF16D1J .29 (7.4) .33 (8.4) 1.25 (31.8) .720 (18.3).0012 DPFF16D12J .30 (7.6) .34 (8.6) 1.25 (31.8) .720 (18.3).0015 DPFF16D15J .32 (8.1) .36 (9.1) 1.25 (31.8) .720 (18.3).0018 DPFF16D18J .34 (8.6) .38 (9.7) 1.25 (31.8) .720 (18.3).0022 DPFF16D22J .50 (12.7) .50 (12.7) 1.30 (33.0) .720 (18.3).0022 DPFF16D22JS .35 (8.9) .39 (9.9) 1.25 (31.8) .720 (18.3).0027 DPFF16D27J .38 (9.7) .42 (10.7) 1.25 (31.8) .720 (18.3).0033 DPFF16D33J .55 (14.0) .55 (14.0) 1.30 (33.0) .720 (18.3).0033 DPFF16D33JS .40 (10.2) .44 (11.2) 1.25 (31.8) .720 (18.3).0039 DPFF16D39J .43 (10.9) .47 (11.9) 1.25 (31.8) .720 (18.3).0047 DPFF16D47J .60 (15.2) .60 (15.2) 1.30 (33.0) .720 (18.3).0047 DPFF16D47JS .46 (11.7) .50 (12.7) 1.25 (31.8) .720 (18.3).0056 DPFF16D56J .49 (12.4) .53 (13.5) 1.25 (31.8) .720 (18.3).0068 DPFF16D68J .65 (16.5) .65 (16.5) 1.30 (33.0) .720 (18.3).0068 DPFF16D68JS .52 (13.2) .56 (14.2) 1.25 (31.8) .720 (18.3).0082 DPFF16D82J .56 (14.2) .60 (15.2) 1.25 (31.8) .720 (18.3).0100 DPFF16S1J .70 (17.8) .70 (17.8) 1.30 (33.0) .720 (18.3).0100 DPFF16S1JS .61 (15.5) .65 (16.5) 1.25 (31.8) .720 (18.3).0120 DPFF16S12J .54 (13.7) .58 (14.7) 1.65 (41.9) 1.095 (27.8).0150 DPFF16S15J .75 (19.1) .75 (19.1) 1.70 (43.2) 1.095 (27.8).0150 DPFF16S15JS .59 (15.0) .63 (16.0) 1.65 (41.9) 1.095 (27.8).0180 DPFF16S18J .63 (16.0) .67 (17.0) 1.65 (41.9) 1.095 (27.8).0220 DPFF16S22J .69 (17.5) .73 (18.5) 1.65 (41.9) 1.095 (27.8).0270 DPFF16S27J .74 (18.8) .78 (19.8) 1.65 (41.9) 1.095 (27.8).0330 DPFF16S33J .95 (24.1) .95 (24.1) 1.70 (43.2) 1.095 (27.8).0330 DPFF16S33JS .81 (20.6) .85 (21.6) 1.65 (41.9) 1.095 (27.8)

Normally Stocked




Type DPPM, Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs


RatedVolts .984 1.220

dV/dt—volts per microsecond, maximum1000 1900 13001200 2100 15001600 3700 28002000 3900 2900

Metallized Compact SnubberRadial Leads Applications

Specifications

Type DPPM radial-leaded, metallized polypropylenecapacitors utilize series wound extended foil withfloating metallized common foil construction. TypeDPPM offers excellent high frequency and highcurrent capabilities and self-healing characteristics.With low inductance and high dV/dt characteristics,Type DPPM is ideal for snubber applications.


±5% (J), ±20% (M)optional

Operating Temperature Range: -40°C to 105°C**Full-rated voltage at 85°C–Derate linearly to 50%-rated voltage at 105°C

Dielectric Strength: 175% (1 minute)Dissipation Factor: .10% Max. (25°C, 1kHz)Insulation Resistance: 400,000 M Min.Life Test: 500 Hours at 85°C at 125% Rated Voltage

Ratings and Dimensions Cap. Catalog T H L S d

µF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

1000 Vdc (450 Vac).0010 DPPM10D1K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0012 DPPM10D12K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0015 DPPM10D15K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0018 DPPM10D18K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0022 DPPM10D22K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0027 DPPM10D27K .275 (7.0) .472 (12.0) .984 (25.0) .826 (21.0) .032 (.8).0033 DPPM10D33K .275 (7.0) .492 (12.5) .984 (25.0) .826 (21.0) .032 (.8).0039 DPPM10D39K .275 (7.0) .511 (13.0) .984 (25.0) .826 (21.0) .032 (.8).0047 DPPM10D47K .295 (7.5) .531 (13.5) .984 (25.0) .826 (21.0) .032 (.8).0056 DPPM10D56K .314 (8.0) .551 (14.0) .984 (25.0) .826 (21.0) .032 (.8).0068 DPPM10D68K .334 (8.5) .570 (14.5) .984 (25.0) .826 (21.0) .032 (.8).0082 DPPM10D82K .334 (8.5) .629 (16.0) .984 (25.0) .826 (21.0) .032 (.8).0100 DPPM10S1K .374 (9.5) .649 (16.5) .984 (25.0) .826 (21.0) .032 (.8).0120 DPPM10S12K .393 (10.0) .688 (17.5) .984 (25.0) .826 (21.0) .032 (.8).0150 DPPM10S15K .374 (9.5) .669 (17.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0180 DPPM10S18K .393 (10.0) .688 (17.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0220 DPPM10S22K .433 (11.0) .728 (18.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0270 DPPM10S27K .472 (12.0) .767 (19.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0330 DPPM10S33K .511 (13.0) .807 (20.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0390 DPPM10S39K .551 (14.0) .846 (21.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0470 DPPM10S47K .590 (15.0) .885 (22.5) 1.220 (31.0) 1.043 (26.5) .032 (.8)


1200 Vdc (475 Vac).0010 DPPM12D1K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0012 DPPM12D12K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0015 DPPM12D15K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0018 DPPM12D18K .275 (7.0) .472 (12.0) .984 (25.0) .826 (21.0) .032 (.8).0022 DPPM12D22K .275 (7.0) .492 (12.5) .984 (25.0) .826 (21.0) .032 (.8).0027 DPPM12D27K .275 (7.0) .492 (12.5) .984 (25.0) .826 (21.0) .032 (.8).0033 DPPM12D33K .295 (7.5) .511 (13.0) .984 (25.0) .826 (21.0) .032 (.8).0039 DPPM12D39K .295 (7.5) .531 (13.5) .984 (25.0) .826 (21.0) .032 (.8).0047 DPPM12D47K .314 (8.0) .551 (14.0) .984 (25.0) .826 (21.0) .032 (.8).0056 DPPM12D56K .334 (8.5) .570 (14.5) .984 (25.0) .826 (21.0) .032 (.8).0068 DPPM12D68K .314 (8.0) .590 (15.0) 1.220 (31.0) .826 (21.0) .032 (.8).0082 DPPM12D82K .334 (8.5) .610 (15.5) 1.220 (31.0) .826 (21.0) .032 (.8).0100 DPPM12S1K .354 (9.0) .629 (16.0) 1.220 (31.0) .826 (21.0) .032 (.8).0120 DPPM12S12K .374 (9.5) .669 (17.0) 1.220 (31.0) .826 (21.0) .032 (.8).0150 DPPM12S15K .413 (10.5) .708 (18.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0180 DPPM12S18K .433 (11.0) .748 (19.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0220 DPPM12S22K .472 (12.0) .787 (20.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0270 DPPM12S27K .511 (13.0) .826 (21.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0330 DPPM12S33K .551 (14.0) .866 (22.0) 1.220 (31.0) 1.043 (26.5) .032 (.8)

LMAX.

MAX.T

H MAX.

1.5mmMAX.d

TINNEDCOPPER

.984 MIN.(25mm)

S±.06 (±1.5)

Normally Stocked



Type DPPM, Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors



1600 Vdc (500 Vac).0010 DPPM16D1K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0012 DPPM16D12K .256 (6.5) .452 (11.5) .984 (25.0) .826 (21.0) .032 (.8).0015 DPPM16D15K .275 (7.0) .492 (12.5) .984 (25.0) .826 (21.0) .032 (.8).0018 DPPM16D18K .295 (7.5) .531 (13.5) .984 (25.0) .826 (21.0) .032 (.8).0022 DPPM16D22K .314 (8.0) .590 (15.0) .984 (25.0) .826 (21.0) .032 (.8).0027 DPPM16D27K .334 (8.5) .610 (15.5) .984 (25.0) .826 (21.0) .032 (.8).0033 DPPM16D33K .374 (9.5) .649 (16.5) .984 (25.0) .826 (21.0) .032 (.8).0039 DPPM16D39K .393 (10.0) .688 (17.5) .984 (25.0) .826 (21.0) .032 (.8).0047 DPPM16D47K .413 (10.5) .748 (19.0) .984 (25.0) .826 (21.0) .032 (.8).0056 DPPM16D56K .393 (10.0) .708 (18.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0068 DPPM16D68K .413 (10.5) .748 (19.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0082 DPPM16D82K .433 (11.0) .787 (20.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0100 DPPM16S1K .472 (12.0) .866 (22.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0120 DPPM16S12K .531 (13.5) .905 (23.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0150 DPPM16S15K .590 (15.0) .964 (24.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0180 DPPM16S18K .649 (16.5) 1.023 (26.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0220 DPPM16S22K .708 (18.0) 1.082 (27.5) 1.220 (31.0) 1.043 (26.5) .032 (.8)

2000 Vdc (500 Vac).0010 DPPM20D1K .275 (7.0) .492 (12.5) .984 (25.0) .826 (21.0) .032 (.8).0012 DPPM20D12K .295 (7.5) .511 (13.0) .984 (25.0) .826 (21.0) .032 (.8).0015 DPPM20D15K .314 (8.0) .551 (14.0) .984 (25.0) .826 (21.0) .032 (.8).0018 DPPM20D18K .334 (8.5) .610 (15.5) .984 (25.0) .826 (21.0) .032 (.8).0022 DPPM20D22K .354 (9.0) .629 (16.0) .984 (25.0) .826 (21.0) .032 (.8).0027 DPPM20D27K .374 (9.5) .649 (16.5) .984 (25.0) .826 (21.0) .032 (.8).0033 DPPM20D33K .413 (10.5) .688 (17.5) .984 (25.0) .826 (21.0) .032 (.8).0039 DPPM20D39K .433 (11.0) .748 (19.0) .984 (25.0) .826 (21.0) .032 (.8).0047 DPPM20D47K .393 (10.0) .748 (19.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0056 DPPM20D56K .433 (11.0) .767 (19.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0068 DPPM20D68K .472 (12.0) .807 (20.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0082 DPPM20D82K .511 (13.0) .846 (21.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0100 DPPM20S1K .551 (14.0) .866 (22.0) 1.220 (31.0) 1.043 (26.5) .032 (.8).0120 DPPM20S12K .570 (14.5) .925 (23.5) 1.220 (31.0) 1.043 (26.5) .032 (.8).0150 DPPM20S15K .629 (16.0) .964 (24.5) 1.220 (31.0) 1.043 (26.5) .032 (.8)

Normally Stocked




Type DPM, Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs

Metallized High FrequencyRadial Leads Switching Power Supplies

Specifications

Type DPM radial-leaded, metallized polypropylenecapacitors boast non-inductive windings with weldedlead terminations which handle high continuouscurrents. The low ESR and low ESL are a glove fitfor high frequency and switching power supplyapplications.

Voltage Range: 250-630 Vdc (160-250 Vac)Capacitance Range: .01-6.8 µFCapacitance Tolerance: ±10% (K) standard





RatedVolts .510 .710 1.020 1.260-1.420 1.850

dV/dt—volts per microsecond, maximum250 34 23 19 14 8400 51 35 26 17 11630 69 48 36 33 22



250 Vdc (160 Vac).010 DPM2S1K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).015 DPM2S15K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).022 DPM2S22K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).033 DPM2S33K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).047 DPM2S47K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).068 DPM2S68K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).100 DPM2P1K .315 (8.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).150 DPM2P15K .315 (8.0) .512 (13.0) .709 (18.0) .591 (15.0) .032 (.8).220 DPM2P22K .315 (8.0) .512 (13.0) .709 (18.0) .591 (15.0) .032 (.8).330 DPM2P33K .354 (9.0) .591 (15.0) .709 (18.0) .591 (15.0) .032 (.8).470 DPM2P47K .394 (10.0) .630 (16.0) 1.024 (26.0) .886 (22.5) .032 (.8).680 DPM2P68K .394 (10.0) .630 (16.0) 1.024 (26.0) .886 (22.5) .032 (.8)

1.000 DPM2W1K .473 (12.0) .788 (20.0) 1.024 (26.0) .886 (22.5) .032 (.8)1.500 DPM2W1P5K .551 (14.0) .866 (22.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)2.200 DPM2W2P2K .591 (15.0) .945 (24.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

L T

d

H

S

.12”MAX.

(3.0mm).79”MIN.

(20mm)

Normally Stocked



Type DPM, Polypropylene Film Capacitors

CORNELLDUBILIER


FilmCapacitors


Cap. Catalog T Max. H Max. L Max. S +.06 dµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

250 Vdc (160 Vac) (cont’d)3.300 DPM2W3P3K .670 (17.0) 1.063 (27.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)4.700 DPM2W4P7K .788 (20.0) 1.182 (30.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)6.800 DPM2W6P8K .906 (23.0) 1.300 (33.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)

400 Vdc (220 Vac).010 DPM4S1K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).015 DPM4S15K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).022 DPM4S22K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).033 DPM4S33K .315 (8.0) .473 (12.0) .512 (13.0) .394 (10.0) .024 (.6).047 DPM4S47K .315 (8.0) .473 (12.0) .709 (18.0) .591 (15.0) .024 (.6).068 DPM4S68K .315 (8.0) .512 (13.0) .709 (18.0) .591 (15.0) .032 (.8).100 DPM4P1K .354 (9.0) .551 (14.0) .709 (18.0) .591 (15.0) .032 (.8).150 DPM4P15K .315 (8.0) .591 (15.0) 1.024 (26.0) .886 (22.5) .032 (.8).220 DPM4P22K .394 (10.0) .630 (16.0) 1.024 (26.0) .886 (22.5) .032 (.8).330 DPM4P33K .433 (11.0) .709 (18.0) 1.024 (26.0) .886 (22.5) .032 (.8).470 DPM4P47K .433 (11.0) .709 (18.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).680 DPM4P68K .551 (14.0) .866 (22.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

1.000 DPM4W1K .630 (16.0) .985 (25.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)1.500 DPM4W1P5K .670 (17.0) .985 (25.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)2.200 DPM4W2P2K .788 (20.0) 1.103 (28.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)3.300 DPM4W3P3K .945 (24.0) 1.300 (33.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)

630 Vdc (250 Vac).010 DPM6S1K .276 (7.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).015 DPM6S15K .276 (7.0) .473 (12.0) .512 (13.0) .394 (10.0) .024 (.6).022 DPM6S22K .315 (8.0) .512 (13.0) .512 (13.0) .394 (10.0) .024 (.6).033 DPM6S33K .315 (8.0) .512 (13.0) .709 (18.0) .591 (15.0) .032 (.8).047 DPM6S47K .354 (9.0) .591 (15.0) .709 (18.0) .591 (15.0) .032 (.8).068 DPM6S68K .394 (10.0) .630 (16.0) .709 (18.0) .591 (15.0) .032 (.8).100 DPM6P1K .394 (10.0) .610 (15.5) 1.024 (26.0) .886 (22.5) .032 (.8).150 DPM6P15K .473 (12.0) .709 (18.0) 1.024 (26.0) .886 (22.5) .032 (.8).220 DPM6P22K .473 (12.0) .866 (22.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).330 DPM6P33K .512 (13.0) .866 (22.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).470 DPM6P47K .591 (15.0) .965 (24.5) 1.260 (32.0) 1.083 (27.5) .032 (.8).680 DPM6P68K .610 (15.5) 1.083 (27.5) 1.260 (32.0) 1.083 (27.5) .032 (.8)

1.000 DPM6W1K .748 (19.0) 1.182 (30.0) 1.851 (47.0) 1.575 (40.0) .032 (.8)

Normally Stocked




Type MPX, Polypropylene Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs


RatedVolts .512 .709 1.043 1.260


250 100 45 25 20S

Metallized Interference Suppression andBox Style, Vac Rated Across-the-Line VAC Applications

Specifications

The Type MPX metallized, polypropylene class X2film capacitors are ideal for across-the-line andinterference suppression circuit applications. Thisseries features the self-healing capabilities associatedwith metallized polypropylene, compact design, andflame retardant construction. Tape and reel packagingare available for ratings with a pitch of 10mm and15mm.

Voltage Range: 250 VacCapacitance Range: .0047-1.0 µFCapacitance Tolerance: ±10% (K) standard

±5% (J)Operating Temperature Range: -40°C to 85°C

Dielectric Strength: 2100 Vdc (1 minute)Dissipation Factor: .10% Max. (25°C, 1kHz)Insulation Resistance: 10,000 mOhms x µF min.,

not to exceed 30,000 mOhms min.

Agency Approvals:UL E171988CSA LR701482VDE 94594SEV 96.5 50875.01SEMKO 9622001 01DEMKO 305640NEMKO P96101909FIMKO 195765


Cap. Catalog T ±.020 (0.5) H ±.020 (0.5) L ±.020 (0.5) S ±.040 (1.0) dµF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

250 Vac.0047 MPXQD47K .197 (5.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).0068 MPXQD68K .197 (5.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).0100 MPXQS1K .197 (5.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).0150 MPXQS15K .197 (5.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).0220 MPXQS22K .197 (5.0) .433 (11.0) .512 (13.0) .394 (10.0) .024 (.6).0330 MPXQS33K .236 (6.0) .472 (12.0) .512 (13.0) .394 (10.0) .024 (.6).0470 MPXQS47K .197 (5.0) .433 (11.0) .709 (18.0) .591 (15.0) .032 (.8).0680 MPXQS68K .236 (6.0) .472 (12.0) .709 (18.0) .591 (15.0) .032 (.8).1000 MPXQP1K .236 (6.0) .531 (13.5) .709 (18.0) .591 (15.0) .032 (.8).1500 MPXQP15K .335 (8.5) .571 (14.5) .709 (18.0) .591 (15.0) .032 (.8).2200 MPXQP22K .276 (7.0) .650 (16.5) 1.043 (26.5) .886 (22.5) .032 (.8).3300 MPXQP33K .335 (8.5) .669 (17.0) 1.043 (26.5) .886 (22.5) .032 (.8).4700 MPXQP47K .394 (10.0) .748 (19.0) 1.043 (26.5) .886 (22.5) .032 (.8).5600 MPXQP56K .433 (11.0) .787 (20.0) 1.260 (32.0) 1.083 (27.5) .032 (.8).6800 MPXQP68K .433 (11.0) .787 (20.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

1.0000 MPXQW1K .551 (14.0) .984 (25.0) 1.260 (32.0) 1.083 (27.5) .032 (.8)

L

H

T

20 MIN.d

Normally Stocked



TAPE & REEL OF AXIAL LEAD CAPACITORS FOR AUTOMATIC INSERTIONEIA STANDARD EIA-296-E

Capacitor Body Diameter Capacitor Pitch “A” ± 0.5mm (0.020”)

≤5mm (≤0.195”) 5mm or 0.200”

5.01-10mm (0.197-0.394”) 10mm or 0.400”

10.01-15mm (0.394-0.591”) 15mm or 0.600”

Capacitor Body Length Inside Tape Spacing “B” ± 1.5mm (0.059”)

≤16.50mm (≤0.65”) 52.4mm or 2.062”

16.51-28.45mm (0.651-1.12”) 63.5mm or 2.500”

28.46-37.00mm (1.121-1.45”) 73.0mm or 2.874”

Capacitor Body Dia. Pitch Quantity pcs/reel

≤5.0mm 5mm 4,000 max.

5.1-7.0mm 10mm 2,000 max.

7.1-9.5mm 10mm 1,000 max.

C D E F

EIA Std. 13.9-38.1mm 76.2-355.6mm 28.6-78.0mm 34.5-92.0mm

(0.547-1.50”) (3.0-14.0”) (1.126-3.071”) (1.358-3.626”)

CDE 16.0mm (0.63”) 355.0mm (13.97”) 50.0mm (1.97”) 60.0mm (2.36”)

3.051

Axial Lead Taping Specifications, Film Capacitors

CORNELLDUBILIER


FilmCapacitors




Radial Lead Taping Specifications, Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs

TAPE & REEL OF RADIAL LEAD CAPACITORS FOR AUTOMATIC INSERTIONEIA STANDARD EIA-468-B

A 56 MAX. (2.20 MAX.)B 372 MAX. (14.65 MAX.)C 372 MAX. (14.65 MAX.)

Ammo Box Packing:

Crimped Lead Taping: Straight Lead Taping:

Reel Packing:

dimensions


Ordering Information, Film Capacitors

CORNELLDUBILIER


FilmCapacitors

Film Capacitor Part Number System (excludes Type 900 series)

Film Capacitor Part Number System (Types 930, 935, 940, 941, 942, 943 and 950)

Options Available

Radial Leads Axial Leads• Cut Leads • Cut Leads

• Other Capacitance • Other CapacitanceValues Values

• Formed Lead Spacings • Tape and Reeling

• Tape and Reeling • Custom Sizes

• Custom Sizes

When possible, specify the complete CDE part number on your order(s). CDE’s part numberingsystem is described below. For options please indicate when making a quote request.

In general, available options include: cut leads, formed leads, non-listed capacitance values,tape, reeling and ammo pack where individual capacitor sizes permit.

TypeDesignation

Voltage Code CapacitanceDecimal Point

T = 0.000D = 0.00S = 0.0P = 0.W = No decimal

point

CapacitanceSignificant

Figures (µF)

WMC 08 D 12 KTolerance

Code

W = ±2.5%I = ±3%

J = ±5%H = ±6%K = ±10%M = ±20%

05 = 50 Vdc 16 = 1600 Vdc06 = 60 Vdc 20 = 2000 Vdc08 = 80 Vdc 30 = 3000 Vdc1 = 100 Vdc Z = 150 Vdc2 = 200/250 Vdc A = 125 Vac3 = 300 Vdc B = 240 Vac4 = 400 Vdc Q = 250 Vac6 = 600/630 Vdc C = 360 Vac8 = 800 Vdc D = 480 Vac

10 = 1000 Vdc E = 160 Vdc12 = 1200 Vdc F = 660 Vac

G = 600 Vac

TypeDesignation

TerminationCode

CapacitanceDecimal Point

T = 0.000D = 0.00S = 0.0P = 0.W = No decimal

point

CapacitanceSignificant

Figures (µF)

930 C P 22 K

Voltage Code

1Tolerance

Code

J = ±5%H = ±6%K = ±10%M = ±20%

C = Bare Copper WireF = Insulated,

Stranded WireH = Tinned Lugs

05 = 50 Vdc 16 = 1600 Vdc06 = 60 Vdc 20 = 2000 Vdc08 = 80 Vdc 30 = 3000 Vdc1 = 100 Vdc Z = 150 Vdc2 = 200/250 Vdc A = 125 Vac4 = 400 Vdc B = 240 Vac6 = 600/630 Vdc Q = 250 Vac8 = 800 Vdc C = 360 Vac

10 = 1000 Vdc D = 480 Vac12 = 1200 Vdc




Application Guide, Film Capacitors

CORNELLDUBILIER


Film

Capa

cito

rs

Capacitance Change vs. Temperature Insulation Resistance vs. Temperature

Polyester Typical Characteristics

Polypropylene Typical Characteristics

Polyphenylene Sulfide Typical Characteristics

Degrees Centigrade Degrees Centigrade

% C

apac

itanc

e Ch

ange

Meg

ohm

s x

MFD



CORNELLDUBILIER


FilmCapacitors

Dissipation Factor vs. Temperature Dissipation Factor vs. Frequency

Degrees Centigrade

% D

issi

patio

n Fa

ctor

Frequency

% D

issi

patio

n Fa

ctor





CORNELLDUBILIER


Film

Capa

cito

rs

Capacitance is within toler-ance when measured at 1 kHz±20 Hz (120 Hz for polyesterif C>1 µF) and 25 ±5°C.Standard tolerance is ±10%.

Dissipation Factor or tan σ isthe ratio of the capacitor’sESR to its reactance. It’s nomore than specified whenmeasured at 1 kHz ±20 Hz(120 Hz for polyester if C>1µF) and 25 ±5°C.

Insulation Resistance changesfrom a minimum resistance-capacitance product (MxµF)to a minimum resistance (M)for rated capacitances above0.25 to 0.5 µF, depending onthe capacitor type. It is no lessthan the lesser of the RC prod-uct or the R specified, whenmeasured at 100 Vdc after 2minutes and at 25 ±5°C.

Rated Voltage is the maxi-mum continuous voltage foractual use up to the ratedmaximum operating tempera-ture.

Dielectric Strength is themaximum peak voltage thatthe capacitor is rated to with-stand at room temperature.Test by applying the specifiedmultiple of rated voltage forone minute through a current-limiting resistance of 100 per volt. As an illustration, totest a Type DPM capacitorrated 250 Vdc and 175%

dielectric strength, apply 438Vdc through a 43.8 k or high-er-value resistor.

Life Test: Subject capacitorsto rated maximum tempera-ture ±3°C with the specifiedmultiple of rated voltageapplied for 500 or 1,000 (+72,-2) hours as specified. Therewill be no visual damage andthe capacitance will not havechanged more than ±5%.Insulation resistance will notdecrease to less than 50% ofinitial limit. Dissipation factorwill not increase to more thaninitial limit.

Pulse Capability is peak-cur-rent capability. The ability ofthe capacitor to withstand cur-rent transients is set largely bythe integrity of the lead con-nections and is indicated bythe dV/dt rating, the maximumpermitted rate of change ofvoltage in V/µs. The peak cur-rent rating in amps is the ratedcapacitance in µF times thedV/dt rating:

Ipk = C(dV/dt)

Marking includes part number,capacitance in µF, tolerance in%, manufacturer and ratedvoltage in Vdc and Vac. Smallunits may include only Type,CD, capacitance in pF anda tolerance code. Example:“DLMCD” and “682K” meansType DLM, 6800 pF (“2” was

the number of zeroes) and10%. When used, tolerancecodes are:

F = ± 1%G = ± 2%H = ± 6%I = ± 3%J = ± 5%K = ±10%M = ±20%

Metallized vs. Film/FoilConstruction. Here’s how tochoose. For a metallized filmcapacitor, the capacitor platesare aluminum sprayed onto thedielectric film by thin-film vacu-um deposition. Compared tomaking the capacitor with sep-arate foil and film sheets, met-allizing enables smaller size,lighter weight, lower cost permicrofarad and self-healing,but it also engenders lower-current capability. Smaller sizeand cost is especially strikingin high capacitance ratings.

Self healing refers to an inter-nal short circuit from an over-voltage transient or a fault inthe film which clears inmicroseconds by vaporizingthe aluminum metalizing at thefault site. There is a glitch inthe applied voltage, but thecapacitor suffers no perma-nent damage save a negligiblereduction in capacitance.

The advantages make CDEmetallized film capacitors the

correct high-value choice forall applications except four:

• low capacitance, less than.01 µF, where size differenceis not significant and thefilm/foil material cost is less,

• high continuous current as ina resonant circuit,

• high-transient current as in asnubber circuit, and

• low noise where self clearingis a problem with its atten-dant, albeit rare, volts ofnoise.

Polyester Dielectric: Just asmetallized is usually the CDEconstruction of choice, so, too,polyester is usually the dielec-tric film material of choice. Ofthe three CDE dielectrics, poly-ester has the highest dielectricconstant and delivers the low-est cost, smallest size capaci-tors with the bonus of beingable to operate to 125°C at halfrated voltage. How-ever, with aDF hovering at 1% at highertemperatures, power dissipa-tion prevents its choice for highcurrent or high-frequency ACvoltage applications, and withabout a 5% capacitance changefrom -55°C to 0°C and from50°C to 125°C, polyester is notthe choice for precision capaci-tance at temperature ex-tremes. But notice that capaci-tance changes only ±1% from

0°C to 50°C.

Polypropylene Dielectric withits low dissipation factorempowers CDE capacitors forhigh-current DC, high-voltageAC and high-frequency ACapplications. And its high insu-lation resistance and lowdielectric absorption are a fitfor precision DC capacitors. Itwould displace polyester inmany applications except itslow dielectric constant andunavailability of thin-gaugefilms produces larger case sizesand prices. A slight handicap—its maximum operating tem-perature is 105°C.

Polypropylene fits many of theapplications polyester misses.It even complements polyesterin wide temperature applica-tions: capacitance decreaseswith temperature at about thesame rate as capacitanceincreases for polyester capaci-tors, so a polypropylene capac-itor in parallel with a polyesterspawns a temperature-com-pensated capacitor.

Polyphenylene Sulfide is forprecision capacitance andwide temperature applications.Able to operate from –55°C to125°C and hold capacitancechange to less than 1% over allbut the extremes of the range,polyphenylene sulfide is the pre-ferred precision-capacitor dielec-

tric and is the dielectric film inFCP chip capacitors.

AC Voltage Operation: Youcan use all CDE film capacitorswith either AC or DC voltages ora combination of the two. Therules for successful applicationare: 1) don’t exceed the dielec-tric’s voltage capability; 2) keepthe capacitor cool, and 3) don’toperate with corona. As a prac-tical matter, here’s how you dothose three rules.

Limit the voltage peaks to therated DC voltage. Limit the cur-rent peaks to the rated capaci-tance times the dV/dt rating.For high-frequency operationlimit the power dissipated sothat the case-temperature riseis no more than 15°C and athigh temperatures the casetemperature no greater thanthe maximum operating tem-perature. The maximum high-frequency sine wave voltage fora 15°C rise may be calculatedusing the following formulas:

VRMS = 11(.5πD2 + πDL)

2πf C • DF(%)

VRMS = 21(TH +TL + HL)

2πf C • DF(%)

D, T, H, and L are dimensionstaken from the ratings and



CORNELLDUBILIER


FilmCapacitors

forroundcases

forovalcases





CORNELLDUBILIER


Film

Capa

cito

rs

Best Change Change/ Typical Typical SizeDielectric Tolerance -25>+85C Year DF DA* IR 1µF/100V

Polyester ±5% +5% 0.4% .5% .4% 30G .09in3

Metallized

Polyprop. ±1% –3% 0.1% .1% .05% 100G .13in3

Metallized

Polyester ±5% +5% 0.4% .5% .35% 100G .40in3

Film/Foil

Polyprop. ±1% –3% 0.2% .05% .03% 200G .71in3

Film/Foil

Metallized ±2% ±0.5% <1% 0.2% .08% 3G N/APolyphen.Sulfide

dimensions charts. DF is dissi-pation factor in percent at oper-ating frequency taken from theDF vs. Frequency charts whichappear on page 5.

And for rule 3, limit the appliedvoltage to the maximum ACrating listed for each type toavoid corona.

Corona is partial breakdown ofthe dielectric by sparking

across air voids in the insula-tion system. It occurs with theapplication of AC voltagebecause the effective “capaci-tance” of the voids is lowerthan the surrounding dielectricmaterial. Like low-value capac-itors connected in series withhigh-value ones, the voids gethigher voltage gradients andthey break down. Corona is tobe avoided because the spark-

ing tends to carbonize thedielectric which converts it toconductive material and even-tually a carbon track can shortthe capacitor.

Comparison of Dielectrics

• Dielectric absorption—a measure of energy stored in the dielectric. Needs to be low for sample-and-hold circuit applications.

Mica

Capacitors

Mica Capacitors


Selector Guide, Mica Capacitors

CORNELLDUBILIER


Mica

Capacitors

Form Lead Spacing Voltage Capacitance PageFactor Types Inches (mm) Range Range Number

CD10 .141 ( 3.6) 100–500 Vdc 1–400 pFD10 .141 ( 3.6) 100–500 Vdc 251–1,500 pF

CD15 .234 ( 5.9) 100–500 Vdc 1–1,500 pFCD19 .344 ( 8.7) 100–500 Vdc 100–10,000 pF 4.002CD30 .438 (11.1) 100–500 Vdc 2,000–40,000 pFCD42 1.063 (27.0) 100–500 Vdc 20,000–91,000 pF

CDV19 .344 ( 8.7) 1,000 Vdc 5–4,700 pFCDV30 .438 (11.1) 1,000–2,500 Vdc 24–13,000 pF

CD5 .120 ( 3.0) 50–300 Vdc 1–400 pFCD6 .172 ( 4.4) 300–500 Vdc 1–120 pFCD7 .172 ( 4.4) 100–500 Vdc 130–1,500 pF

CDS5 .120 ( 3.0) 50–300 Vdc 1–400 pFCDS10 .141 ( 3.6) 100–500 Vdc 1–400 pF 4.006

D7 .141 ( 3.6) 100–500 Vdc 251–1,500 pFCDS15 .234 ( 5.9) 100–500 Vdc 1–1,500 pFCDS19 .344 ( 8.7) 100–500 Vdc 270–10,000 pFCDS30 .438 (11.1) 100–500 Vdc 2,000–40,000 pF

CD4 .100 ( 2.5) 100–500 Vdc 1–1,500 pF 4.013CD16 .234 ( 5.9) 500 Vdc 100–7,500 pF

CDV16 .234 ( 5.9) 1,000 Vdc 100–3,000 pFCD17 .234 ( 5.9) 100–500 Vdc 1–1,500 pFCD18 .344 ( 8.7) 500 Vdc 270–5,100 pF 4.011

CDV18 .344 ( 8.7) 1,000 Vdc 27–820 pFReel-Packed Dipped CDA15 .200 ( 5.0) 100–500 Vdc 1–1,500 pF 4.015

CMR03 .120 ( 3.0) 50–300 Vdc 1–400 pFCMR04 .150 ( 3.8) 100–500 Vdc 1–390 pFCMR05 .225 ( 5.7) 500 Vdc 1–390 pF 4.020CMR06 .350 ( 8.9) 500 Vdc 430–4,700 pFCMR07 .425 (10.8) 500 Vdc 5,100–20,000 pF

Rectangular Case 271 N/A 250– 3,000 Peak Volts 47–100,000 pF272 N/A 250– 5,000 Peak Volts 47–250,000 pF 4.025273 N/A 400– 8,000 Peak Volts 200–1,000,000 pF

Cylindrical Case 291 N/A 1,000– 6,000 Peak Volts 47–100,000 pF292 N/A 1,500–10,000 Peak Volts 47–100,000 pF 4.027293 N/A 2,000–20,000 Peak Volts 47–100,000 pF294 N/A 3,000–30,000 Peak Volts 100–100,000 pF

Custom CaseKVx N/A 100–150,000 Peak Volts 100 pF–10 µF 4.035

Chip MC08 N/A 100 Vdc .5-43 pFMC12 N/A 100 and 500 Vdc .5-430 pF 1.030MC18 N/A 100 and 500 Vdc 91.5-820 pFMC22 N/A 100, 500 and 1,000 Vdc 1-2,000 pF

Standard Dipped

Miniature Dipped

High-Frequency Dipped

High-Reliability Dipped

4.009

1.048




Mica Capacitors, Standard Dipped

CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rs

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)18 CDV19CF180J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)20 CD10ED200J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 ( 3.6) .016 ( .4)20 CD15ED200J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)20 CDV19EF200J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)22 CD10ED220J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 ( 3.6) .016 ( .4)22 CD15ED220J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)22 CDV19EF220J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)24 CD10ED240J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 ( 3.6) .016 ( .4)24 CD15ED240J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)24 CDV19EF240J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)24 CDV30EH240J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)24 CDV30EJ240J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)24 CDV30EK240J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)27 CD10ED270J03 500 .370 ( 9.4) .330 ( 8.4) .190 (4.8) .141 ( 3.6) .016 ( .4)27 CD15ED270J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)27 CDV19EF270J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)27 CDV30EH270J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)27 CDV30EJ270J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)27 CDV30EK270J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)30 CD10ED300J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)30 CD15ED300J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)30 CDV19EF300J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)30 CDV30EH300J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)30 CDV30EJ300J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)30 CDV30EK300J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)33 CD10ED330J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)33 CD15ED330J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)33 CDV19EF330J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)33 CDV30EH330J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)33 CDV30EJ330J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)

Types CD10, D10, CD15, CD19, CD30, CD42, CDV19, CDV30

Heralded for stability, CDE standard dipped

silvered mica capacitors are the first choice for

timing, close tolerance, and all applications

where you need to count on the capacitance.

These standard types are widely available

through distribution.

• Voltage Range: 100 Vdc to 2,500 Vdc• Capacitance Range: 1 pF to 91,000 pF• Capacitance Tolerance: ±1⁄2 pF (D), ±1 pF (C), ±1⁄2% (E),

±1% (F), ±2% (G), ±5% (J)• Temperature Range: –55°C to +125°C (O)

–55°C to +150°C (P)*• Dimensions meet EIA RS153B specification• MIL-C-5 military styles available

(See Ordering Information, p. 4.018)• Reel packing available• 100,000 V/µs dV/dt pulse capability minimum• Units tested at 200% of rated voltage• Non-flammable units which meet IEC 695-2-2 available*“P” temperature range is available for Types CD10, CD15, CD19, CD30,

CD42, CDA15

Measured atpoint wherephenolic conebecomes acylinder

LMax.

TMax.

S±.031″

.078″ Max.no solder

H Max.

d

1″Min.

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)1 CD10CD010D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)1 CD15CD010D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)2 CD10CD020D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)2 CD15CD020D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)3 CD10CD030D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)3 CD15CD030D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)4 CD15CD040D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)5 CD10CD050D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)5 CD15CD050D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)5 CDV19CF050D03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)6 CD10CD060D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)6 CD15CD060D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)6 CDV19CF060D03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)7 CD10CD070D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)7 CD15CD070D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)7 CDV19CF070D03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)8 CD10CD080D03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)8 CD15CD080D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)8 CDV19CF080D03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)

10 CD10CD100J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)10 CD15CD100J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)10 CDV19CF100J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)12 CD10CD120J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)12 CD15CD120J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)12 CDV19CF120J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)15 CD10CD150J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)15 CD15CD150J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)15 CDV19CF150J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)18 CD10CD180J03 500 .360 ( 9.1) .330 ( 8.4) .190 (4.8) .141 (3.6) .016 (.4)18 CD15CD180J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)



CORNELLDUBILIER


Radial LeadedM

ica Capacitors

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)91 CDV30FJ910J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)91 CDV30FK910J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)

100 CD10FD101J03 500 .370 ( 9.4) .350 ( 8.9) .200 (5.1) .141 ( 3.6) .016 ( .4)100 CD15FD101J03 500 .460 (11.7) .360 ( 9.1) .180 (4.6) .234 ( 5.9) .025 ( .6)100 CD19FD101J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)100 CDV19FF101J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)100 CDV30FH101J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)100 CDV30FJ101J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)100 CDV30FK101J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)110 CD10FD111J03 500 .380 ( 9.7) .350 ( 8.9) .200 (5.1) .141 ( 3.6) .016 ( .4)110 CD15FD111J03 500 .460 (11.7) .370 ( 9.4) .180 (4.6) .234 ( 5.9) .025 ( .6)110 CDV19FF111J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)110 CDV30FH111J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)110 CDV30FJ111J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)110 CDV30FK111J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)120 CD10FD121J03 500 .380 ( 9.7) .350 ( 8.9) .200 (5.1) .141 ( 3.6) .016 ( .4)120 CD15FD121J03 500 .460 (11.7) .370 ( 9.4) .180 (4.6) .234 ( 5.9) .025 ( .6)120 CD19FD121J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)120 CDV19FF121J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)120 CDV30FH121J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)120 CDV30FJ121J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)120 CDV30FK121J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)130 CD10FD131J03 500 .380 ( 9.7) .360 ( 9.1) .200 (5.1) .141 ( 3.6) .016 ( .4)130 CD15FD131J03 500 .460 (11.7) .370 ( 9.4) .180 (4.6) .234 ( 5.9) .025 ( .6)130 CDV19FF131J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)130 CDV30FH131J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)130 CDV30FJ131J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)150 CD10FD151J03 500 .380 ( 9.7) .360 ( 9.1) .210 (5.3) .141 ( 3.6) .016 ( .4)150 CD15FD151J03 500 .460 (11.7) .370 ( 9.4) .190 (4.8) .234 ( 5.9) .025 ( .6)150 CD19FD151J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)150 CDV19FF151J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)150 CDV30FH151J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)150 CDV30FJ151J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)160 CD10FD161J03 500 .380 ( 9.7) .360 ( 9.1) .210 (5.3) .141 ( 3.6) .016 ( .4)160 CD15FD161J03 500 .460 (11.7) .370 ( 9.4) .190 (4.8) .234 ( 5.9) .025 ( .6)160 CDV19FF161J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)160 CDV30FH161J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)160 CDV30FJ161J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)180 CD10FD181J03 500 .390 ( 9.9) .370 ( 9.4) .210 (5.3) .141 ( 3.6) .016 ( .4)180 CD15FD181J03 500 .460 (11.7) .370 ( 9.4) .190 (4.8) .234 ( 5.9) .025 ( .6)180 CD19FD181J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)180 CDV19FF181J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)180 CDV30FH181J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)180 CDV30FJ181J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)200 CD10FD201J03 500 .390 ( 9.9) .370 ( 9.4) .210 (5.3) .141 ( 3.6) .016 ( .4)200 CD15FD201J03 500 .460 (11.7) .380 ( 9.7) .190 (4.8) .234 ( 5.9) .025 ( .6)200 CDV19FF201J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)200 CDV30FH201J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)200 CDV30FJ201J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)220 CD10FD221J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)220 CD15FD221J03 500 .460 (11.7) .380 ( 9.7) .200 (5.1) .234 ( 5.9) .025 ( .6)220 CD19FD221J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)220 CDV19FF221J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)220 CDV30FH221J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)220 CDV30FJ221J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)240 CD10FD241J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)240 CD15FD241J03 500 .460 (11.7) .380 ( 9.7) .200 (5.1) .234 ( 5.9) .025 ( .6)240 CD19FD241J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)240 CDV19FF241J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)240 CDV30FH241J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)240 CDV30FJ241J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)250 CD10FD251J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)250 CD15FD251J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)250 CD19FD251J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)270 CD10FC271J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)270 CD19FD271J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)270 D105F271J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)270 CD15FD271J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)270 CDV19FF271J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)270 CDV30FH271J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)

Ratings and DimensionsCap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)33 CDV30EK330J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)36 CD10ED360J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)36 CD15ED360J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)36 CDV19EF360J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)36 CDV30EH360J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)36 CDV30EJ360J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)36 CDV30EK360J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)39 CD10ED390J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)39 CD15ED390J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)39 CDV19EF390J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)39 CDV30EH390J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)39 CDV30EJ390J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)39 CDV30EK390J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)43 CD10ED430J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)43 CD15ED430J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)43 CDV19EF430J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)43 CDV30EH430J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)43 CDV30EJ430J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)43 CDV30EK430J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)47 CD10ED470J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)47 CD15ED470J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)47 CDV19EF470J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)47 CDV30EH470J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)47 CDV30EJ470J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)47 CDV30EK470J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)50 CD10ED500J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)50 CD15ED500J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)50 CDV19EF500J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)50 CDV30EH500J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)50 CDV30EJ500J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)50 CDV30EK500J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)51 CD10ED510J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)51 CD15ED510J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)51 CDV19EF510J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)51 CDV30EH510J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)51 CDV30EJ510J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)51 CDV30EK510J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)56 CD10ED560J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)56 CD15ED560J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)56 CDV19EF560J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)56 CDV30EH560J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)56 CDV30EK560J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)62 CD10ED620J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)62 CD15ED620J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 ( 5.9) .025 ( .6)62 CDV19EF620J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)62 CDV30EH620J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)62 CDV30EJ620J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)62 CDV30EK620J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)68 CD10ED680J03 500 .370 ( 9.4) .340 ( 8.6) .190 (4.8) .141 ( 3.6) .016 ( .4)68 CD15ED680J03 500 .450 (11.4) .360 ( 9.1) .180 (4.6) .234 ( 5.9) .025 ( .6)68 CDV19EF680J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)68 CDV30EH680J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)68 CDV30EJ680J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)68 CDV30EK680J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)75 CD10ED750J03 500 .370 ( 9.4) .340 ( 8.6) .200 (5.1) .141 ( 3.6) .016 ( .4)75 CD15ED750J03 500 .450 (11.4) .360 ( 9.1) .180 (4.6) .234 ( 5.9) .025 ( .6)75 CDV19EF750J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)75 CDV30EH750J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)75 CDV30EJ750J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)75 CDV30EK750J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)82 CD10ED820J03 500 .370 ( 9.4) .350 ( 8.9) .200 (5.1) .141 ( 3.6) .016 ( .4)82 CD15ED820J03 500 .450 (11.4) .360 ( 9.1) .180 (4.6) .234 ( 5.9) .025 ( .6)82 CDV19EF820J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)82 CDV30EH820J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)82 CDV30EJ820J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)82 CDV30EK820J03 2,500 .780 (19.8) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)91 CD10FD910J03 500 .370 ( 9.4) .350 ( 8.9) .200 (5.1) .141 ( 3.6) .016 ( .4)91 CD15FD910J03 500 .460 (11.7) .360 ( 9.1) .180 (4.6) .234 ( 5.9) .025 ( .6)91 CDV19FF910J03 1,000 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)91 CDV30FH910J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)





CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rs

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)750 D103F751J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)750 CD15FC751J03 300 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)750 CD19FD751J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 ( 8.7) .032 ( .8)750 CDV30FH751J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)750 CDV30FJ751J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)750 CDV30FK751J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)820 D103F821J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)820 CD15FC821J03 300 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)820 CD19FD821J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 ( 8.7) .032 ( .8)820 CDV19FF821J03 1,000 .660 (16.8) .530 (13.5) .230 (5.8) .344 ( 8.7) .032 ( .8)820 CDV30FH821J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)820 CDV30FJ821J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)820 CDV30FK821J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)910 D101F911J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)910 CD15FA911J03 100 .470 (11.9) .400 (10.2) .220 (5.6) .234 ( 5.9) .025 ( .6)910 CD19FD911J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 ( 8.7) .032 ( .8)910 CDV19FF911J03 1,000 .670 (17.0) .530 (13.5) .240 (6.1) .344 ( 8.7) .032 ( .8)910 CDV30FH911J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)910 CDV30FJ911J03 2,000 .780 (19.8) .880 (22.4) .280 (7.1) .438 (11.1) .040 (1.0)910 CDV30FK911J03 2,500 .780 (19.8) .870 (22.1) .290 (7.4) .438 (11.1) .040 (1.0)

1000 D101F102J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)1000 CD15FA102J03 100 .480 (12.2) .400 (10.2) .230 (5.8) .234 ( 5.9) .025 ( .6)1000 CD19FD102J03 500 .650 (16.5) .520 (13.2) .220 (5.6) .344 ( 8.7) .032 ( .8)1000 CDV19FF102J03 1,000 .670 (17.0) .530 (13.5) .250 (6.4) .344 ( 97) .032 ( .8)1000 CDV30FH102J03 1,500 .770 (19.6) .860 (21.8) .260 (6.6) .438 (11.1) .040 (1.0)1000 CDV30FJ102J03 2,000 .780 (19.8) .880 (22.4) .280 (7.1) .438 (11.1) .040 (1.0)1000 CDV30FK102J03 2,500 .790 (20.1) .880 (22.4) .310 (7.9) .438 (11.1) .040 (1.0)1100 D101F112J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)1100 CD15FA112J03 100 .490 (12.4) .420 (10.7) .240 (6.1) .234 ( 5.9) .025 ( .6)1100 CD19FD112J03 500 .650 (16.5) .520 (13.2) .220 (5.6) .344 ( 8.7) .032 ( .8)1100 CDV19FF112J03 1,000 .670 (17.0) .530 (13.5) .250 (6.4) .344 ( 8.7) .032 ( .8)1100 CDV30FH112J03 1,500 .770 (19.6) .860 (21.8) .260 (6.6) .438 (11.1) .040 (1.0)1200 D101F122J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)1200 CD15FA122J03 100 .490 (12.4) .420 (10.7) .240 (6.1) .234 ( 5.9) .025 ( .6)1200 CD19FD122J03 500 .660 (16.8) .520 (13.2) .220 (5.6) .344 ( 8.7) .032 ( .8)1200 CDV30FH122J03 1,500 .770 (19.6) .860 (21.8) .260 (6.6) .438 (11.1) .040 (1.0)1200 CDV30FJ122J03 2,000 .780 (19.8) .880 (22.4) .280 (7.1) .438 (11.1) .040 (1.0)1200 CDV30FK122J03 2,500 .790 (20.1) .880 (22.4) .310 (7.9) .438 (11.1) .040 (1.0)1300 D101F132J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)1300 CD19FD132J03 500 .660 (16.8) .520 (13.2) .220 (5.6) .344 ( 8.7) .032 ( .8)1300 CDV19FF132J03 1,000 .670 (17.0) .540 (13.7) .260 (6.6) .344 ( 8.7) .032 ( .8)1300 CDV30FH132J03 1,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)1300 CDV30FJ132J03 2,000 .780 (19.8) .880 (22.4) .300 (7.6) .438 (11.1) .040 (1.0)1300 CDV30FK132J03 2,500 .800 (20.3) .890 (22.6) .330 (8.4) .438 (11.1) .040 (1.0)1500 D101F152J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)1500 CD15FA152J03 100 .500 (12.7) .430 (10.9) .250 (6.4) .234 ( 5.9) .025 ( .6)1500 CD19FD152J03 500 .660 (16.8) .520 (13.2) .230 (5.8) .344 ( 8.7) .032 ( .8)1500 CDV19FF152J03 1,000 .680 (17.3) .540 (13.7) .270 (6.9) .344 ( 8.7) .032 ( .8)1500 CDV30FH152J03 1,500 .780 (19.8) .870 (22.1) .280 (7.1) .438 (11.1) .040 (1.0)1500 CDV30FJ152J03 2,000 .790 (20.1) .890 (22.6) .320 (8.1) .438 (11.1) .040 (1.0)1500 CDV30FK152J03 2,500 .800 (20.3) .890 (22.6) .350 (8.9) .438 (11.1) .040 (1.0)1600 CD19FD162J03 500 .660 (16.8) .530 (13.5) .230 (5.8) .344 ( 8.7) .032 ( .8)1600 CDV19FF162J03 1,000 .680 (17.3) .550 (14.0) .280 (7.1) .344 ( 8.7) .032 ( .8)1600 CDV30FH162J03 1,500 .780 (19.8) .870 (22.1) .280 (7.1) .438 (11.1) .040 (1.0)1600 CDV30FJ162J03 2,000 .790 (20.1) .890 (22.6) .320 (8.1) .438 (11.1) .040 (1.0)1600 CDV30FK162J03 2,500 .800 (20.3) .890 (22.6) .350 (8.9) .438 (11.1) .040 (1.0)1800 CD19FD182J03 500 .670 (17.0) .530 (13.5) .240 (6.1) .344 ( 8.7) .032 ( .8)1800 CDV19FF182J03 1,000 .680 (17.3) .550 (14.0) .290 (7.4) .344 ( 8.7) .032 ( .8)1800 CDV30FH182J03 1,500 .780 (19.8) .870 (22.1) .290 (7.4) .438 (11.1) .040 (1.0)1800 CDV30FJ182J03 2,000 .790 (20.1) .890 (22.6) .340 (8.6) .438 (11.1) .040 (1.0)1800 CDV30FK182J03 2,500 .810 (20.6) .900 (22.9) .370 (9.4) .438 (11.1) .040 (1.0)2000 CD19FD202J03 500 .670 (17.0) .530 (13.5) .240 (6.1) .344 ( 8.7) .032 ( .8)2000 CD30FD202J03 500 .770 (19.6) .850 (21.6) .240 (6.1) .438 (11.1) .040 (1.0)2000 CDV19FF202J03 1,000 .680 (17.3) .560 (14.2) .300 (7.6) .344 ( 8.7) .032 ( .8)2000 CDV30FH202J03 1,500 .780 (19.8) .870 (22.1) .300 (7.6) .438 (11.1) .040 (1.0)

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)270 CDV30FJ271J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)300 CD10FC301J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)300 D105F301J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)300 CD15FD301J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)300 CD19FD301J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)300 CDV30FJ301J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)330 CD10FA331J03 100 .390 ( 9.9) .370 ( 9.4) .220 (5.6) .141 ( 3.6) .016 ( .4)330 D105F331J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)330 CD15FD331J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)330 CD19FD331J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 ( 8.7) .032 ( .8)330 CDV30FJ331J03 2,000 .770 (19.6) .860 (21.8) .250 (6.4) .438 (11.1) .040 (1.0)330 CDV30FK331J03 2,500 .780 (19.8) .870 (22.1) .250 (6.4) .438 (11.1) .040 (1.0)360 CD10FA361J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)360 D105F361J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)360 CD15FD361J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)360 CD19FD361J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)390 CD10FA391J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)390 D105F391J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)390 CD15FD391J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)390 CD19FD391J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)390 CDV19FF391J03 1,000 .650 (16.5) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)390 CDV30FH391J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)400 CD10FA401J03 100 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)430 D105F431J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)430 CD15FD431J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)430 CD19FD431J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)430 CDV30FH431J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)470 D105F471J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)470 CD15FD471J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 ( 5.9) .025 ( .6)470 CD19FD471J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)470 CDV30FH471J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)470 CDV30FJ471J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)470 CDV30FK471J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)500 D105F501J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)500 CD15FD501J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 ( 5.9) .025 ( .6)500 CD19FD501J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)500 CDV30FH501J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)500 CDV30FJ501J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)500 CDV30FK501J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)510 D105F511J03 500 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)510 CD15FD511J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 ( 5.9) .025 ( .6)510 CD19FD511J03 500 .650 (16.5) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)510 CDV30FH511J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)510 CDV30FJ511J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)510 CDV30FK511J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)560 D103F561J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)560 CD15FC561J03 300 .460 (11.7) .380 ( 9.7) .210 (5.3) .234 ( 5.9) .025 ( .6)560 CD19FD561J03 500 .650 (16.5) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)560 CDV19FF561J03 1,000 .650 (16.5) .510 (13.0) .210 (5.3) .344 ( 8.7) .032 ( .8)560 CDV30FH561J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)560 CDV30FJ561J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)560 CDV30FK561J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)620 D103F621J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)620 CD15FC621J03 300 .460 (11.7) .380 ( 9.7) .210 (5.3) .234 ( 5.9) .025 ( .6)620 CD19FD621J03 500 .650 (16.5) .510 (13.0) .200 (5.1) .344 ( 8.7) .032 ( .8)620 CDV30FH621J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)620 CDV30FJ621J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)620 CDV30FK621J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)680 D103F681J03 300 .390 ( 9.9) .380 ( 9.7) .220 (5.6) .141 ( 3.6) .016 ( .4)680 CD15FC681J03 300 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 ( 5.9) .025 ( .6)680 CD19FD681J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 ( 8.7) .032 ( .8)680 CDV19FF681J03 1,000 .660 (16.8) .520 (13.2) .220 (5.6) .344 ( 8.7) .032 ( .8)680 CDV30FH681J03 1,500 .770 (19.6) .850 (21.6) .250 (6.4) .438 (11.1) .040 (1.0)680 CDV30FJ681J03 2,000 .770 (19.6) .870 (22.1) .260 (6.6) .438 (11.1) .040 (1.0)680 CDV30FK681J03 2,500 .780 (19.8) .870 (22.1) .270 (6.9) .438 (11.1) .040 (1.0)




CORNELLDUBILIER


Radial LeadedM

ica Capacitors

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)6800 CD19FC682J03 300 .690 (17.5) .570 (14.5) .330 ( 8.4) .344 ( 8.7) .032 ( .8)6200 CD30FD622J03 500 .780 (19.8) .870 (22.1) .290 ( 7.4) .438 (11.1) .040 (1.0)6200 CDV30FF622J03 1,000 .800 (20.3) .890 (22.6) .350 ( 8.9) .438 (11.1) .040 (1.0)6200 CDV30FH622J03 1,500 .820 (20.8) .910 (23.1) .410 (10.4) .438 (11.1) .040 (1.0)6800 CD30FD682J03 500 .780 (19.8) .880 (22.4) .300 ( 7.6) .438 (11.1) .040 (1.0)6800 CDV30FF682J03 1,000 .800 (20.3) .890 (22.6) .360 ( 9.1) .438 (11.1) .040 (1.0)6800 CDV30FH682J03 1,500 .830 (21.1) .920 (23.4) .420 (10.7) .438 (11.1) .040 (1.0)7500 CD19FA752J03 100 .700 (17.8) .570 (14.5) .340 ( 8.6) .344 ( 8.7) .032 ( .8)7500 CD30FD752J03 500 .790 (20.1) .880 (22.4) .310 ( 7.9) .438 (11.1) .040 (1.0)7500 CDV30FF752J03 1,000 .810 (20.6) .890 (22.6) .370 ( 9.4) .438 (11.1) .040 (1.0)7500 CDV30FH752J03 1,500 .830 (21.1) .920 (23.4) .420 (10.7) .438 (11.1) .040 (1.0)8200 CD19FA822J03 100 .700 (17.8) .580 (14.7) .350 ( 8.9) .344 ( 8.7) .032 ( .8)8200 CD30FD822J03 500 .790 (20.1) .880 (22.4) .320 ( 8.1) .438 (11.1) .040 (1.0)8200 CDV30FF822J03 1,000 .810 (20.6) .900 (22.9) .390 ( 9.9) .438 (11.1) .040 (1.0)8200 CDV30FH822J03 1,500 .840 (21.3) .930 (23.6) .460 (11.7) .438 (11.1) .040 (1.0)9100 CD19FA912J03 100 .710 (18.0) .590 (15.0) .360 ( 9.1) .344 ( 8.7) .032 ( .8)9100 CD30FD912J03 500 .790 (20.1) .880 (22.4) .330 ( 8.4) .438 (11.1) .040 (1.0)9100 CDV30FF912J03 1,000 .820 (20.8) .900 (22.9) .410 (10.4) .438 (11.1) .040 (1.0)

10000 CD19FA103J03 100 .720 (18.3) .600 (15.2) .370 ( 9.4) .344 ( 8.7) .032 ( .8)10000 CD30FD103J03 500 .800 (20.3) .890 (22.6) .340 ( 8.6) .438 (11.1) .040 (1.0)10000 CDV30FF103J03 1,000 .820 (20.8) .910 (23.1) .420 (10.7) .438 (11.1) .040 (1.0)11000 CD30FD113J03 500 .800 (20.3) .890 (22.6) .350 ( 8.9) .438 (11.1) .040 (1.0)11000 CDV30FF113J03 1,000 .830 (21.1) .910 (23.1) .440 (11.2) .438 (11.1) .040 (1.0)12000 CD30FD123J03 500 .800 (20.3) .890 (22.6) .360 ( 9.1) .438 (11.1) .040 (1.0)12000 CDV30FF123J03 1,000 .830 (21.1) .920 (23.4) .460 (11.7) .438 (11.1) .040 (1.0)13000 CD30FD133J03 500 .810 (20.6) .890 (22.6) .370 ( 9.4) .438 (11.1) .040 (1.0)13000 CDV30FF133J03 1,000 .840 (21.3) .930 (23.6) .480 (12.2) .438 (11.1) .040 (1.0)15000 CD30FD153J03 500 .810 (20.6) .900 (22.9) .390 ( 9.9) .438 (11.1) .040 (1.0)16000 CD30FD163J03 500 .820 (20.8) .900 (22.9) .410 (10.4) .438 (11.1) .040 (1.0)18000 CD30FD183J03 500 .820 (20.8) .910 (23.1) .430 (10.9) .438 (11.1) .040 (1.0)20000 CD30FD203J03 500 .830 (21.1) .920 (23.4) .450 (11.4) .438 (11.1) .040 (1.0)20000 CD42FD203J03 500 1.420 (36.1) .870 (22.1) .300 ( 7.6) 1.063 (27.0) .040 (1.0)22000 CD30FD223J03 500 .830 (21.1) .930 (23.6) .460 (11.7) .438 (11.1) .040 (1.0)22000 CD42FD223J03 500 1.420 (36.1) .880 (22.4) .310 ( 7.9) 1.063 (27.0) .040 (1.0)24000 CD30FC243J03 300 .820 (20.8) .900 (22.9) .410 (10.4) .438 (11.1) .040 (1.0)24000 CD42FD243J03 500 1.430 (36.3) .880 (22.4) .320 ( 8.1) 1.063 (27.0) .040 (1.0)25000 CD30FC253J03 300 .820 (20.8) .910 (23.1) .430 (10.9) .438 (11.1) .040 (1.0)25000 CD42FD253J03 500 1.430 (36.3) .880 (22.4) .330 ( 8.4) 1.063 (27.0) .040 (1.0)27000 CD30FC273J03 300 .820 (20.8) .910 (23.1) .430 (10.9) .438 (11.1) .040 (1.0)27000 CD42FD273J03 500 1.430 (36.3) .880 (22.4) .330 ( 8.4) 1.063 (27.0) .040 (1.0)30000 CD30FC303J03 300 .830 (21.1) .920 (23.4) .460 (11.7) .438 (11.1) .040 (1.0)30000 CD42FD303J03 500 1.440 (36.6) .890 (22.6) .350 ( 8.9) 1.063 (27.0) .040 (1.0)33000 CD30FA333J03 100 .830 (21.1) .910 (23.1) .440 (11.2) .438 (11.1) .040 (1.0)33000 CD42FD333J03 500 1.440 (36.6) .890 (22.6) .360 ( 9.1) 1.063 (27.0) .040 (1.0)36000 CD30FA363J03 100 .830 (21.1) .920 (23.4) .450 (11.4) .438 (11.1) .040 (1.0)36000 CD42FD363J03 500 1.450 (36.8) .900 (22.9) .380 ( 9.7) 1.063 (27.0) .040 (1.0)39000 CD42FD393J03 500 1.450 (36.8) .900 (22.9) .400 (10.2) 1.063 (27.0) .040 (1.0)40000 CD30FA403J03 100 .840 (21.3) .920 (23.4) .470 (11.9) .438 (11.1) .040 (1.0)43000 CD42FD433J03 500 1.460 (37.1) .910 (23.1) .420 (10.7) 1.063 (27.0) .040 (1.0)47000 CD42FD473J03 500 1.470 (37.3) .910 (23.1) .450 (11.4) 1.063 (27.0) .040 (1.0)50000 CD42FD503J03 500 1.480 (37.6) .920 (23.4) .470 (11.9) 1.063 (27.0) .040 (1.0)51000 CD42FD513J03 500 1.480 (37.6) .920 (23.4) .470 (11.9) 1.063 (27.0) .040 (1.0)56000 CD42FC563J03 300 1.460 (37.1) .910 (23.1) .420 (10.7) 1.063 (27.0) .040 (1.0)62000 CD42FC623J03 300 1.470 (37.3) .920 (23.4) .450 (11.4) 1.063 (27.0) .040 (1.0)68000 CD42FC683J03 300 1.480 (37.6) .920 (23.4) .470 (11.9) 1.063 (27.0) .040 (1.0)75000 CD42FA753J03 100 1.470 (37.3) .910 (23.1) .440 (11.2) 1.063 (27.0) .040 (1.0)82000 CD42FA823J03 100 1.480 (37.6) .920 (23.4) .460 (11.7) 1.063 (27.0) .040 (1.0)91000 CD42FA913J03 100 1.500 (38.1) .940 (23.9) .500 (12.7) 1.063 (27.0) .040 (1.0)

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

2100 CDV30FJ212J03 2,000 .800 (20.3) .900 (22.9) .360 ( 9.1) .438 (11.1) .040 (1.0)2100 CDV30FK212J03 2,500 .820 (20.8) .910 (23.1) .390 ( 9.9) .438 (11.1) .040 (1.0)2200 CD19FD222J03 500 .670 (17.0) .530 (13.5) .250 ( 6.4) .344 ( 8.7) .032 ( .8)2200 CD30FD222J03 500 .770 (19.6) .850 (21.6) .250 ( 6.4) .438 (11.1) .040 (1.0)2200 CDV19FF222J03 1,000 .690 (17.5) .560 (14.2) .310 ( 7.9) .344 ( 8.7) .032 ( .8)2200 CDV30FH222J03 1,500 .790 (20.1) .880 (22.4) .310 ( 7.9) .438 (11.1) .040 (1.0)2400 CD19FD242J03 500 .670 (17.0) .540 (13.7) .260 ( 6.6) .344 ( 8.7) .032 ( .8)2400 CD30FD242J03 500 .770 (19.6) .850 (21.6) .250 ( 6.4) .438 (11.1) .040 (1.0)2400 CDV19FF242J03 1,000 .690 (17.5) .570 (14.5) .320 ( 8.1) .344 ( 8.7) .032 ( .8)2400 CDV30FH242J03 1,500 .790 (20.1) .880 (22.4) .320 ( 8.1) .438 (11.1) .040 (1.0)2400 CDV30FJ242J03 2,000 .800 (20.3) .900 (22.9) .380 ( 9.7) .438 (11.1) .040 (1.0)2400 CDV30FK242J03 2,500 .820 (20.8) .910 (23.1) .420 (10.7) .438 (11.1) .040 (1.0)2500 CD19FD252J03 500 .680 (17.3) .540 (13.7) .260 ( 6.6) .344 ( 8.7) .032 ( .8)2500 CD30FD252J03 500 .770 (19.6) .850 (21.6) .250 ( 6.4) .438 (11.1) .040 (1.0)2500 CDV30FH252J03 1,500 .790 (20.1) .880 (22.4) .320 ( 8.1) .438 (11.1) .040 (1.0)2500 CDV30FJ252J03 2,000 .800 (20.3) .900 (22.9) .380 ( 9.7) .438 (11.1) .040 (1.0)2500 CDV30FK252J03 2,500 .820 (20.8) .910 (23.1) .420 (10.7) .438 (11.1) .040 (1.0)2700 CD19FD272J03 500 .680 (17.3) .540 (13.7) .270 ( 6.9) .344 ( 8.7) .032 ( .8)2700 CD30FD272J03 500 .770 (19.6) .850 (21.6) .250 ( 6.4) .438 (11.1) .040 (1.0)2700 CDV19FF272J03 1,000 .700 (17.8) .570 (14.5) .340 ( 8.6) .344 ( 8.7) .032 ( .8)2700 CDV30FH272J03 1,500 .790 (20.1) .880 (22.4) .330 ( 8.4) .438 (11.1) .040 (1.0)2700 CDV30FJ272J03 2,000 .810 (20.6) .910 (23.1) .400 (10.2) .438 (11.1) .040 (1.0)2700 CDV30FK272J03 2,500 .830 (21.1) .920 (23.4) .450 (11.4) .438 (11.1) .040 (1.0)3000 CD19FD302J03 500 .680 (17.3) .550 (14.0) .280 ( 7.1) .344 ( 8.7) .032 ( .8)3000 CD30FD302J03 500 .770 (19.6) .860 (21.8) .250 ( 6.4) .438 (11.1) .040 (1.0)3000 CDV19FF302J03 1,000 .710 (18.0) .580 (14.7) .360 ( 9.1) .344 ( 8.7) .032 ( .8)3000 CDV30FH302J03 1,500 .800 (20.3) .890 (22.6) .340 ( 8.6) .438 (11.1) .040 (1.0)3000 CDV30FJ302J03 2,000 .810 (20.6) .910 (23.1) .420 (10.7) .438 (11.1) .040 (1.0)3000 CDV30FK302J03 2,500 .840 (21.3) .930 (23.6) .480 (12.2) .438 (11.1) .040 (1.0)3300 CD19FD332J03 500 .680 (17.3) .550 (14.0) .290 ( 7.4) .344 ( 8.7) .032 ( .8)3300 CD30FD332J03 500 .770 (19.6) .860 (21.8) .250 ( 6.4) .438 (11.1) .040 (1.0)3300 CDV19FF332J03 1,000 .720 (18.3) .590 (15.0) .380 ( 9.7) .344 ( 8.7) .032 ( .8)3300 CDV30FH332J03 1,500 .800 (20.3) .890 (22.6) .350 ( 8.9) .438 (11.1) .040 (1.0)3300 CDV30FJ332J03 2,000 .820 (20.8) .920 (23.4) .440 (11.2) .438 (11.1) .040 (1.0)3600 CD19FD362J03 500 .680 (17.3) .560 (14.2) .300 ( 7.6) .344 ( 8.7) .032 ( .8)3600 CD30FD362J03 500 .770 (19.6) .860 (21.8) .260 ( 6.6) .438 (11.1) .040 (1.0)3600 CDV19FF362J03 1,000 .730 (18.5) .600 (15.2) .400 (10.2) .344 ( 8.7) .032 ( .8)3600 CDV30FH362J03 1,500 .800 (20.3) .890 (22.6) .350 ( 8.9) .438 (11.1) .040 (1.0)3600 CDV30FJ362J03 2,000 .820 (20.8) .920 (23.4) .440 (11.2) .438 (11.1) .040 (1.0)3900 CD19FD392J03 500 .690 (17.5) .560 (14.2) .310 ( 7.9) .344 ( 8.7) .032 ( .8)3900 CD30FD392J03 500 .770 (19.6) .860 (21.8) .260 ( 6.6) .438 (11.1) .040 (1.0)3900 CDV19FF392J03 1,000 .740 (18.8) .610 (15.5) .420 (10.7) .344 ( 8.7) .032 ( .8)3900 CDV30FH392J03 1,500 .800 (20.3) .890 (22.6) .360 ( 9.1) .438 (11.1) .040 (1.0)3900 CDV30FJ392J03 2,000 .830 (21.1) .930 (23.6) .460 (11.7) .438 (11.1) .040 (1.0)4300 CD19FD432J03 500 .690 (17.5) .570 (14.5) .330 ( 8.4) .344 ( 8.7) .032 ( .8)4300 CD30FD432J03 500 .780 (19.8) .860 (21.8) .270 ( 6.9) .438 (11.1) .040 (1.0)4300 CDV19FF432J03 1,000 .750 (19.1) .620 (15.7) .440 (11.2) .344 ( 8.7) .032 ( .8)4300 CDV30FH432J03 1,500 .810 (20.6) .900 (22.9) .370 ( 9.4) .438 (11.1) .040 (1.0)4300 CDV30FJ432J03 2,000 .840 (21.3) .930 (23.6) .480 (12.2) .438 (11.1) .040 (1.0)4700 CD19FD472J03 500 .700 (17.8) .580 (14.7) .350 ( 8.9) .344 ( 8.7) .032 ( .8)4700 CD30FD472J03 500 .780 (19.8) .860 (21.8) .270 ( 6.9) .438 (11.1) .040 (1.0)4700 CDV19FF472J03 1,000 .760 (19.3) .630 (16.0) .460 (11.7) .344 ( 8.7) .032 ( .8)4700 CDV30FH472J03 1,500 .810 (20.6) .900 (22.9) .380 ( 9.7) .438 (11.1) .040 (1.0)5000 CD19FD502J03 500 .710 (18.0) .590 (15.0) .370 ( 9.4) .344 ( 8.7) .032 ( .8)5000 CD30FD502J03 500 .780 (19.8) .860 (21.8) .280 ( 7.1) .438 (11.1) .040 (1.0)5000 CDV30FH502J03 1,500 .810 (20.6) .900 (22.9) .380 ( 9.7) .438 (11.1) .040 (1.0)5100 CD19FD512J03 500 .710 (18.0) .590 (15.0) .370 ( 9.4) .344 ( 8.7) .032 ( .8)5100 CD30FD512J03 500 .780 (19.8) .860 (21.8) .280 ( 7.1) .438 (11.1) .040 (1.0)5100 CDV30FF512J03 1,000 .790 (20.1) .880 (22.4) .330 ( 8.4) .438 (11.1) .040 (1.0)5100 CDV30FH512J03 1,500 .810 (20.6) .900 (22.9) .390 ( 9.9) .438 (11.1) .040 (1.0)5600 CD19FC562J03 300 .680 (17.3) .560 (14.2) .310 ( 7.9) .344 ( 8.7) .032 ( .8)5600 CD30FD562J03 500 .780 (19.8) .870 (22.1) .290 ( 7.4) .438 (11.1) .040 (1.0)5600 CDV30FF562J03 1,000 .800 (20.3) .890 (22.6) .340 ( 8.6) .438 (11.1) .040 (1.0)5600 CDV30FH562J03 1,500 .820 (20.8) .910 (23.1) .400 (10.2) .438 (11.1) .040 (1.0)6200 CD19FC622J03 300 .690 (17.5) .560 (14.2) .320 ( 8.1) .344 ( 8.7) .032 ( .8)





Miniature Dipped, Mica Capacitors

CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rs

Types CD5, CD6, CD7, CDS5, CDS10, D7, CDS15, CDS19, CDS30

CDE miniature dipped silvered mica capacitors

fit those tight spots in modules and high-density

electronics. In low- and moderate-humidity

applications, these small sizes deliver the same

stability and rugged performance as the standard

dipped units.

• Voltage Range: 50 Vdc to 500 Vdc• Capacitance Range: 1 pF to 40,000 pF• Capacitance Tolerance: ±1⁄2 pF (D), ±1⁄2% (E), ±1 pF

(C),±1% (F), ±2% (G), ±5% (J)• Temperature Range: –55°C to +125°C• 20,000 V/µs dV/dt pulse capability minimum

Measured at pointwhere phenoliccone becomes acylinder

S±.031″

.078″ Max.no solder 1″

Min.

TMax.

LMax.

H Max.

d


1 CD5CC010D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)1 CDS5CC010D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)1 CD6CD010D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)1 CDS10CD010D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)1 CDS15CD010D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)2 CD5CC020D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)2 CDS5CC020D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)2 CD6CD020D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)2 CDS10CD020D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)2 CDS15CD020D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)3 CD5CC030D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)3 CDS5CC030D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)3 CD6CD030D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)3 CDS10CD030D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)3 CDS15CD030D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)4 CD5CC040D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)4 CDS5CC040D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)4 CD6CD040D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)4 CDS10CD040D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)4 CDS15CD040D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)5 CD5CC050D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)5 CDS5CC050D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)5 CD6CD050D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)5 CDS10CD050D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)5 CDS15CD050D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)6 CD5CC060D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)6 CDS5CC060D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)6 CD6CD060D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)6 CDS10CD060D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)6 CDS15CD060D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)7 CD5CC070D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)7 CDS5CC070D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)7 CD6CD070D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)7 CDS10CD070D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)7 CDS15CD070D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)8 CD5CC080D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)8 CDS5CC080D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)8 CD6CD080D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)8 CDS10CD080D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)8 CDS15CD080D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)9 CD5CC090D03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)9 CDS5CC090D03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)9 CD6CD090D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)9 CDS10CD090D03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)9 CDS15CD090D03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)


10 CD5CC100J03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)10 CDS5CC100J03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)10 CD6CD100D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)10 CDS10CD100J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)10 CDS15CD100J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)11 CD5CC110J03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)11 CDS5CC110J03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)11 CD6CD110D03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)11 CDS10CD110J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)11 CDS15CD110J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)12 CD5CC120J03 300 .270 ( 6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)12 CDS5CC120J03 300 .250 ( 6.4) .160 (4.1) .090 (2.3) .120 (3.0) .016 (.4)12 CD6CD120J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)12 CDS10CD120J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)12 CDS15CD120J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)15 CD5CC150J03 300 .270 ( 6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)15 CDS5CC150J03 300 .250 ( 6.4) .170 (4.3) .100 (2.5) .120 (3.0) .016 (.4)15 CD6CD150J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)15 CDS10CD150J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)15 CDS15CD150J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)18 CD5CC180J03 300 .270 ( 6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)18 CDS5CC180J03 300 .250 ( 6.4) .170 (4.3) .100 (2.5) .120 (3.0) .016 (.4)18 CD6CD180J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)18 CDS10CD180J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)18 CDS15CD180J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)20 CD5EC200J03 300 .270 ( 6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)20 CDS5EC200J03 300 .250 ( 6.4) .170 (4.3) .100 (2.5) .120 (3.0) .016 (.4)20 CD6ED200J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)20 CDS10ED200J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)20 CDS15ED200J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)22 CD5EC220J03 300 .270 ( 6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)22 CDS5EC220J03 300 .250 ( 6.4) .170 (4.3) .100 (2.5) .120 (3.0) .016 (.4)22 CD6ED220J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)22 CDS10ED220J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)22 CDS15ED220J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)24 CD5EC240J03 300 .270 ( 6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)24 CDS5EC240J03 300 .250 ( 6.4) .170 (4.3) .100 (2.5) .120 (3.0) .016 (.4)24 CD6ED240J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)24 CDS10ED240J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)24 CDS15ED240J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)27 CD5EC270J03 300 .270 ( 6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)27 CDS5EC270J03 300 .250 ( 6.4) .170 (4.3) .110 (2.8) .120 (3.0) .016 (.4)27 CD6ED270J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)27 CDS10ED270J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)27 CDS15ED270J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)



CORNELLDUBILIER


Radial LeadedM

ica Capacitors


Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)100 CDS5FC101J03 300 .250 ( 6.4) .200 ( 5.1) .160 ( 4.1) .120 ( 3.0) .016 ( .4)100 CDS10FD101J03 500 .320 ( 8.1) .260 ( 6.6) .130 ( 3.3) .141 ( 3.6) .016 ( .4)100 CDS15FD101J03 500 .430 ( 10.9) .280 ( 7.1) .150 ( 3.8) .234 ( 5.9) .025 ( .6)110 CD5FC111J03 300 .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)110 CD6FC111J03 300 .275 ( 7.0) .175 ( 4.4) .095 ( 2.4) .172 ( 4.4) .016 ( .4)110 CDS5FC111J03 300 .250 ( 6.4) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)110 CDS10FD111J03 500 .320 ( 8.1) .260 ( 6.6) .130 ( 3.3) .141 ( 3.6) .016 ( .4)110 CDS15FD111J03 500 .440 ( 11.2) .290 ( 7.4) .150 ( 3.8) .234 ( 5.9) .025 ( .6)120 CD5FC121J03 300 .270 ( 6.9) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)120 CD6FC121J03 300 .275 ( 7.0) .175 ( 4.4) .095 ( 2.4) .172 ( 4.4) .016 ( .4)120 CDS5FC121J03 300 .250 ( 6.4) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)120 CDS10FD121J03 500 .320 ( 8.1) .260 ( 6.6) .140 ( 3.6) .141 ( 3.6) .016 ( .4)120 CDS15FD121J03 500 .440 ( 11.2) .290 ( 7.4) .150 ( 3.8) .234 ( 5.9) .025 ( .6)130 CD5FA131J03 100 .270 ( 6.9) .230 ( 5.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)130 CDS5FA131J03 100 .250 ( 6.4) .190 ( 4.8) .140 ( 3.6) .120 ( 3.0) .016 ( .4)130 CD7FD131J03 500 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)130 CDS10FD131J03 500 .320 ( 8.1) .260 ( 6.6) .140 ( 3.6) .141 ( 3.6) .016 ( .4)130 CDS15FD131J03 500 .440 ( 11.2) .290 ( 7.4) .150 ( 3.8) .234 ( 5.9) .025 ( .6)150 CD5FA151J03 100 .270 ( 6.9) .230 ( 5.8) .170 ( 4.3) .120 ( 3.0) .016 ( .4)150 CDS5FA151J03 100 .250 ( 6.4) .190 ( 4.8) .150 ( 3.8) .120 ( 3.0) .016 ( .4)150 CD7FD151J03 500 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)150 CDS10FD151J03 500 .320 ( 8.1) .260 ( 6.6) .140 ( 3.6) .141 ( 3.6) .016 ( .4)150 CDS15FD151J03 500 .440 ( 11.2) .290 ( 7.4) .150 ( 3.8) .234 ( 5.9) .025 ( .6)160 CD5FA161J03 100 .270 ( 6.9) .240 ( 6.1) .170 ( 4.3) .120 ( 3.0) .016 ( .4)160 CDS5FA161J03 100 .250 ( 6.4) .200 ( 5.1) .150 ( 3.8) .120 ( 3.0) .016 ( .4)160 CD7FD161J03 500 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)160 CDS10FD161J03 500 .320 ( 8.1) .260 ( 6.6) .140 ( 3.6) .141 ( 3.6) .016 ( .4)160 CDS15FD161J03 500 .440 ( 11.2) .290 ( 7.4) .150 ( 3.8) .234 ( 5.9) .025 ( .6)180 CD5FA181J03 100 .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)180 CDS5FA181J03 100 .250 ( 6.4) .200 ( 5.1) .160 ( 4.1) .120 ( 3.0) .016 ( .4)180 CD7FD181J03 500 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)180 CDS10FD181J03 500 .320 ( 8.1) .260 ( 6.6) .140 ( 3.6) .141 ( 3.6) .016 ( .4)180 CDS15FD181J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)200 CD5FA201J03 100 .270 ( 6.9) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)200 CDS5FA201J03 100 .250 ( 6.4) .200 ( 5.1) .170 ( 4.3) .120 ( 3.0) .016 ( .4)200 CD7FC201J03 300 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)200 CDS10FD201J03 500 .330 ( 8.4) .270 ( 6.9) .150 ( 3.8) .141 ( 3.6) .016 ( .4)200 CDS15FD201J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)220 CD5FY221J03 50 .270 ( 6.9) .220 ( 5.6) .150 ( 3.8) .120 ( 3.0) .016 ( .4)220 CDS5FY221J03 50 .250 ( 6.4) .190 ( 4.8) .130 ( 3.3) .120 ( 3.0) .016 ( .4)220 CD7FC221J03 300 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)220 CDS10FD221J03 500 .330 ( 8.4) .270 ( 6.9) .150 ( 3.8) .141 ( 3.6) .016 ( .4)220 CDS15FD221J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)240 CD5FY241J03 50 .270 ( 6.9) .220 ( 5.6) .160 ( 4.1) .120 ( 3.0) .016 ( .4)240 CDS5FY241J03 50 .250 ( 6.4) .190 ( 4.8) .140 ( 3.6) .120 ( 3.0) .016 ( .4)240 CD7FC241J03 300 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)240 CDS10FD241J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)240 CDS15FD241J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)250 CD5FY251J03 50 .270 ( 6.9) .220 ( 5.6) .160 ( 4.1) .120 ( 3.0) .016 ( .4)250 CDS5FY251J03 50 .250 ( 6.4) .190 ( 4.8) .140 ( 3.6) .120 ( 3.0) .016 ( .4)250 CDS10FD251J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)250 CDS15FD251J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)270 CD5FY271J03 50 .270 ( 6.9) .230 ( 5.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)270 CDS5FY271J03 50 .250( 6.4) .190 ( 4.8) .140 ( 3.6) .120 ( 3.0) .016 ( .4)270 CD7FC271J03 300 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)270 CDS10FC271J03 300 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)270 D75F271J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)270 CDS15FD271J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)270 CDS19FD271J03 500 .610 ( 15.5) .450 ( 11.4) .130 ( 3.3) .344 ( 8.7) .032 ( .8)300 CD5FY301J03 50 .270 ( 6.9) .230 ( 5.8) .170 ( 4.3) .120 ( 3.0) .016 ( .4)300 CDS5FY301J03 50 .250 ( 6.4) .190 ( 4.8) .150 ( 3.8) .120 ( 3.0) .016 ( .4)300 CD7FC301J03 300 .265 ( 6.7) .260 ( 6.6) .110 ( 2.8) .172 ( 4.4) .016 ( .4)300 CDS10FC301J03 300 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)300 D75F301J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)300 CDS15FD301J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)300 CDS19FD301J03 500 .610 ( 15.5) .450 ( 11.4) .130 ( 3.3) .344 ( 8.7) .032 ( .8)330 CD5FY331J03 50 .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)330 CDS5FY331J03 50 .250 ( 6.4) .190 ( 4.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)330 CD7FA331J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)330 CDS10FA331J03 100 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)


30 CD5EC300J03 300 .270 ( 6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)30 CDS5EC300J03 300 .250 ( 6.4) .170 (4.3) .110 (2.8) .120 (3.0) .016 (.4)30 CD6ED300J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)30 CDS10ED300J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)30 CDS15ED300J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)33 CD5EC330J03 300 .270 ( 6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)33 CDS5EC330J03 300 .250 ( 6.4) .170 (4.3) .110 (2.8) .120 (3.0) .016 (.4)33 CD6ED330J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)33 CDS10ED330J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)33 CDS15ED330J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)36 CD5EC360J03 300 .270 ( 6.9) .210 (5.3) .130 (3.3) .120 (3.0) .016 (.4)36 CDS5EC360J03 300 .250 ( 6.4) .170 (4.3) .110 (2.8) .120 (3.0) .016 (.4)36 CD6ED360J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)36 CDS10ED360J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)36 CDS15ED360J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)39 CD5EC390J03 300 .270 ( 6.9) .210 (5.3) .130 (3.3) .120 (3.0) .016 (.4)39 CDS5EC390J03 300 .250 ( 6.4) .170 (4.3) .110 (2.8) .120 (3.0) .016 (.4)39 CD6ED390J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)39 CDS10ED390J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)39 CDS15ED390J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)43 CD5EC430J03 300 .270 ( 6.9) .210 (5.3) .140 (3.6) .120 (3.0) .016 (.4)43 CDS5EC430J03 300 .250 ( 6.4) .170 (4.3) .120 (3.0) .120 (3.0) .016 (.4)43 CD6ED430J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)43 CDS10ED430J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)43 CDS15ED430J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)47 CD5EC470J03 300 .270 ( 6.9) .210 (5.3) .140 (3.6) .120 (3.0) .016 (.4)47 CDS5EC470J03 300 .250 ( 6.4) .170 (4.3) .120 (3.0) .120 (3.0) .016 (.4)47 CD6ED470J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)47 CDS10ED470J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)47 CDS15ED470J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)50 CD6ED500J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)50 CDS10ED500J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)50 CDS15ED500J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)51 CD5EC510J03 300 .270 ( 6.9) .210 (5.3) .140 (3.6) .120 (3.0) .016 (.4)51 CDS5EC510J03 300 .250 ( 6.4) .170 (4.3) .120 (3.0) .120 (3.0) .016 (.4)51 CD6ED510J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)51 CDS10ED510J03 500 .310 ( 7.9) .260 (6.6) .120 (3.0) .141 (3.6) .016 (.4)51 CDS15ED510J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)56 CD5EC560J03 300 .270 ( 6.9) .220 (5.6) .150 (3.8) .120 (3.0) .016 (.4)56 CDS5EC560J03 300 .250 ( 6.4) .180 (4.6) .130 (3.3) .120 (3.0) .016 (.4)56 CD6ED560J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)56 CDS10ED560J03 500 .310 ( 7.9) .260 (6.6) .130 (3.3) .141 (3.6) .016 (.4)56 CDS15ED560J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)62 CD5EC620J03 300 .270 ( 6.9) .220 (5.6) .150 (3.8) .120 (3.0) .016 (.4)62 CDS5EC620J03 300 .250 ( 6.4) .180 (4.6) .130 (3.3) .120 (3.0) .016 (.4)62 CD6ED620J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)62 CDS10ED620J03 500 .310 ( 7.9) .260 (6.6) .130 (3.3) .141 (3.6) .016 (.4)62 CDS15ED620J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)68 CD5EC680J03 300 .270 ( 6.9) .220 (5.6) .150 (3.8) .120 (3.0) .016 (.4)68 CDS5EC680J03 300 .250 ( 6.4) .180 (4.6) .130 (3.3) .120 (3.0) .016 (.4)68 CD6ED680J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)68 CDS10ED680J03 500 .310 ( 7.9) .260 (6.6) .130 (3.3) .141 (3.6) .016 (.4)68 CDS15ED680J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)75 CD5EC750J03 300 .270 ( 6.9) .230 (5.8) .160 (4.1) .120 (3.0) .016 (.4)75 CDS5EC750J03 300 .250 ( 6.4) .190 (4.8) .140 (3.6) .120 (3.0) .016 (.4)75 CD6ED750J03 500 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)75 CDS10ED750J03 500 .310 ( 7.9) .260 (6.6) .130 (3.3) .141 (3.6) .016 (.4)75 CDS15ED750J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)82 CD5EC820J03 300 .270 ( 6.9) .230 (5.8) .160 (4.1) .120 (3.0) .016 (.4)82 CD6EC820J03 300 .250 ( 6.4) .190 (4.8) .095 (2.4) .172 (4.4) .016 (.4)82 CDS5EC820J03 300 .275 ( 7.0) .175 (4.4) .140 (3.6) .120 (3.0) .016 (.4)82 CDS10ED820J03 500 .310 ( 7.9) .260 (6.6) .130 (3.3) .141 (3.6) .016 (.4)82 CDS15ED820J03 500 .430 (10.9) .280 (7.1) .140 (3.6) .234 (5.9) .025 (.6)91 CD5FC910J03 300 .270 ( 6.9) .230 (5.8) .170 (4.3) .120 (3.0) .016 (.4)91 CD6FC910J03 300 .275 ( 7.0) .190 (4.8) .095 (2.4) .172 (4.4) .016 (.4)91 CDS5FC910J03 300 .250 ( 6.4) .175 (4.4) .150 (3.8) .120 (3.0) .016 (.4)91 CDS10FD910J03 500 .310 ( 7.9) .260 (6.6) .130 (3.3) .141 (3.6) .016 (.4)91 CDS15FD910J03 500 .430 (10.9) .280 (7.1) .150 (3.8) .234 (5.9) .025 (.6)

100 CD5FC101J03 300 .270 ( 6.9) .240 (6.1) .180 (4.6) .120 (3.0) .016 (.4)100 CD6FC101J03 300 .275 ( 7.0) .175 (4.4) .095 (2.4) .172 (4.4) .016 (.4)





CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rs

Ratings and DimensionsCap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)330 D75F331J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)330 CDS15FD331J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)330 CDS19FD331J03 500 .610 ( 15.5) .450 ( 11.4) .130 ( 3.3) .334 ( 8.7) .032 ( .8)360 CD5FY361J03 50 .270 ( 6.9) .240 ( 6.1) .190 ( 4.8) .120 ( 3.0) .016 ( .4)360 CDS5FY361J03 50 .250 ( 6.4) .190 ( 4.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)360 CD7FA361J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)360 CDS10FA361J03 100 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)360 D75F361J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)360 CDS15FD361J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)360 CDS19FD361J03 500 .610 ( 15.5) .450 ( 11.4) .140 ( 3.6) .344 ( 8.7) .032 ( .8)390 CD5FY391J03 50 .270 ( 6.9) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)390 CDS5FY391J03 50 .250 ( 6.4) .190 ( 4.8) .170 ( 4.3) .120 ( 3.0) .016 ( .4)390 CD7FA391J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)390 CDS10FA391J03 100 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)390 D75F391J03 500 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)390 CDS15FD391J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)390 CDS19FD391J03 500 .610 ( 15.5) .450 ( 11.4) .140 ( 3.6) .344 ( 8.7) .032 ( .8)400 CD5FY401J03 50 .270 ( 6.9) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)400 CDS5FY401J03 50 .250 ( 6.4) .190 ( 4.8) .170 ( 4.3) .120 ( 3.0) .016 ( .4)400 CDS10FA401J03 100 .340 ( 8.6) .270 ( 6.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)430 CD7FA431J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)430 D75F431J03 500 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)430 CDS15FD431J03 500 .440 ( 11.2) .290 ( 7.4) .160 ( 4.1) .234 ( 5.9) .025 ( .6)430 CDS19FD431J03 500 .610 ( 15.5) .450 ( 11.4) .140 ( 3.6) .344 ( 8.7) .032 ( .8)470 CD7FA471J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)470 D75F471J03 500 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)470 CDS15FD471J03 500 .440 ( 11.2) .300 ( 7.6) .160 ( 4.1) .234 ( 5.9) .025 ( .6)470 CDS19FD471J03 500 .610 ( 15.5) .450 ( 11.4) .140 ( 3.6) .344 ( 8.7) .032 ( .8)470 CDS30FD471J03 500 .720 ( 18.3) .790 ( 20.1) .180 ( 4.6) .438 ( 11.1) .040 ( 1.0)500 D75F501J03 500 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)500 CDS15FD501J03 500 .440 ( 11.2) .300 ( 7.6) .160 ( 4.1) .234 ( 5.9) .025 ( .6)500 CDS19FD501J03 500 .610 ( 15.5) .450 ( 11.4) .140 ( 3.6) .344 ( 8.7) .032 ( .8)510 CD7FA511J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)510 D75F511J03 500 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)510 CDS15FD511J03 500 .440 ( 11.2) .300 ( 7.6) .160 ( 4.1) .234 ( 5.9) .025 ( .6)510 CDS19FD511J03 500 .610 ( 15.5) .450 ( 11.4) .140 ( 3.6) .344 ( 8.7) .032 ( .8)560 CD7FA561J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)560 D73F561J03 300 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)560 CDS15FC561J03 300 .450 ( 11.4) .310 ( 7.9) .160 ( 4.1) .234 ( 5.9) .025 ( .6)560 CDS19FD561J03 500 .610 ( 15.5) .450 ( 11.4) .150 ( 3.8) .344 ( 8.7) .032 ( .8)620 CD7FA621J03 100 .275 ( 7.0) .260 ( 6.6) .125 ( 3.2) .172 ( 4.4) .016 ( .4)620 D73F621J03 300 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)620 CDS15FC621J03 300 .450 ( 11.4) .310 ( 7.9) .160 ( 4.1) .234 ( 5.9) .025 ( .6)620 CDS19FD621J03 500 .610 ( 15.5) .460 ( 11.7) .150 ( 3.8) .344 ( 8.7) .032 ( .8)680 CD7FA681J03 100 .300 ( 7.6) .290 ( 7.4) .135 ( 3.4) .172 ( 4.4) .016 ( .4)680 D73F681J03 300 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)680 CDS15FC681J03 300 .450 ( 11.4) .310 ( 7.9) .160 ( 4.1) .234 ( 5.9) .025 ( .6)680 CDS19FD681J03 500 .610 ( 15.5) .460 ( 11.7) .150 ( 3.8) .344 ( 8.7) .032 ( .8)750 CD7FA751J03 100 .300 ( 7.6) .290 ( 7.4) .135 ( 3.4) .172 ( 4.4) .016 ( .4)750 D73F751J03 300 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)750 CDS15FC751J03 300 .450 ( 11.4) .310 ( 7.9) .170 ( 4.3) .234 ( 5.9) .025 ( .6)750 CDS19FD751J03 500 .610 ( 15.5) .460 ( 11.7) .150 ( 3.8) .344 ( 8.7) .032 ( .8)820 D73F821J03 300 .340 ( 8.6) .310 ( 7.9) .160 ( 4.1) .141 ( 3.6) .016 ( .4)820 CDS15FC821J03 300 .450 ( 11.4) .310 ( 7.9) .170 ( 4.3) .234 ( 5.9) .025 ( .6)820 CD7FA821J03 100 .300 ( 7.6) .290 ( 7.4) .135 ( 3.4) .172 ( 4.4) .016 ( .4)820 CDS19FD821J03 500 .610 ( 15.5) .460 ( 11.7) .150 ( 3.8) .344 ( 8.7) .032 ( .8)910 CD7FA911J03 100 .300 ( 7.6) .290 ( 7.4) .135 ( 3.4) .172 ( 4.4) .016 ( .4)910 D71F911J03 100 .340 ( 8.6) .310 ( 7.9) .170 ( 4.3) .141 ( 3.6) .016 ( .4)910 CDS15FA911J03 100 .450 ( 11.4) .310 ( 7.9) .170 ( 4.3) .234 ( 5.9) .025 ( .6)910 CDS19FD911J03 500 .620 ( 15.7) .460 ( 11.7) .160 ( 4.1) .344 ( 8.7) .032 ( .8)

1000 CD7FA102J03 100 .320 ( 8.1) .300 ( 7.6) .155 ( 3.9) .172 ( 4.4) .016 ( .4)1000 D71F102J03 100 .340 ( 8.6) .310 ( 7.9) .170 ( 4.3) .141 ( 3.6) .016 ( .4)1000 CDS15FA102J03 100 .450 ( 11.4) .310 ( 7.9) .170 ( 4.3) .234 ( 5.9) .025 ( .6)1000 CDS19FD102J03 500 .620 ( 15.7) .460 ( 11.7) .160 ( 4.1) .344 ( 8.7) .032 ( .8)1100 CD7FA112J03 100 .320 ( 8.1) .300 ( 7.6) .155 ( 3.9) .172 ( 4.4) .016 ( .4)1100 D71F112J03 100 .340 ( 8.6) .310 ( 7.9) .170 ( 4.3) .141 ( 3.6) .016 ( .4)1100 CDS15FA112J03 100 .460 ( 11.7) .310 ( 7.9) .180 ( 4.6) .234 ( 5.9) .025 ( .6)1100 CDS19FD112J03 500 .620 ( 15.7) .460 ( 11.7) .160 ( 4.1) .344 ( 8.7) .032 ( .8)1200 CD7FA122J03 100 .320 ( 8.1) .300 ( 7.6) .155 ( 3.9) .172 ( 4.4) .016 ( .4)1200 D71F122J03 100 .340 ( 8.6) .310 ( 7.9) .170 (4.3) .141 ( 3.6) .016 ( .4)


1200 CDS15FA122J03 100 .460 (11.7) .310 ( 7.9) .180 ( 4.6) .234 ( 5.9) .025 ( .6)1200 CDS19FD122J03 500 .620 (15.7) .460 (11.7) .170 ( 4.3) .344 ( 8.7) .032 ( .8)1300 CD7FA132J03 100 .330 ( 8.4) .310 ( 7.9) .175 ( 4.4) .172 ( 4.4) .016 ( .4)1300 D71F132J03 100 .340 ( 8.6) .310 ( 7.9) .170 ( 4.3) .141 ( 3.6) .016 ( .4)1300 CDS19FD132J03 500 .620 (15.7) .460 (11.7) .170 ( 4.3) .344 ( 8.7) .032 ( .8)1500 CD7FA152J03 100 .330 ( 8.4) .310 ( 7.9) .175 ( 4.4) .172 ( 4.4) .016 ( .4)1500 D71F152J03 100 .340 ( 8.6) .310 ( 7.9) .170 ( 4.3) .141 ( 3.6) .016 ( .4)1500 CDS15FA152J03 100 .460 (11.7) .310 ( 7.9) .180 ( 4.6) .234 ( 5.9) .025 ( .6)1500 CDS19FD152J03 500 .620 (15.7) .460 (11.7) .170 ( 4.3) .344 ( 8.7) .032 ( .8)1600 CDS19FD162J03 500 .620 (15.7) .460 (11.7) .180 ( 4.6) .344 ( 8.7) .032 ( .8)1800 CDS19FD182J03 500 .620 (15.7) .460 (11.7) .180 ( 4.6) .344 ( 8.7) .032 ( .8)2000 CDS19FD202J03 500 .630 (16.0) .460 (11.7) .190 ( 4.8) .344 ( 8.7) .032 ( .8)2000 CDS30FD202J03 500 .720 (18.3) .790 (20.1) .180 ( 4.6) .438 (11.1) .040 (1.0)2200 CDS19FD222J03 500 .630 (16.0) .460 (11.7) .190 ( 4.8) .344 ( 8.7) .032 ( .8)2200 CDS30FD222J03 500 .720 (18.3) .790 (20.1) .180 ( 4.6) .438 (11.1) .040 (1.0)2400 CDS19FD242J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)2400 CDS30FD242J03 500 .720 (18.3) .790 (20.1) .180 ( 4.6) .438 (11.1) .040 (1.0)2500 CDS19FD252J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)2500 CDS30FD252J03 500 .720 (18.3) .790 (20.1) .190 ( 4.8) .438 (11.1) .040 (1.0)2700 CDS19FD272J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)2700 CDS30FD272J03 500 .720 (18.3) .790 (20.1) .190 ( 4.8) .438 (11.1) .040 (1.0)3000 CDS19FD302J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)3000 CDS30FD302J03 500 .720 (18.3) .790 (20.1) .190 ( 4.8) .438 (11.1) .040 (1.0)3300 CDS19FD332J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)3300 CDS30FD332J03 500 .720 (18.3) .790 (20.1) .190 ( 4.8) .438 (11.1) .040 (1.0)3600 CDS19FD362J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)3600 CDS30FD362J03 500 .720 (18.3) .790 (20.1) .200 ( 5.1) .438 (11.1) .040 (1.0)3900 CDS19FD392J03 500 .630 (16.0) .470 (11.9) .210 ( 5.3) .344 ( 8.7) .032 ( .8)3900 CDS30FD392J03 500 .720 (18.3) .790 (20.1) .200 ( 5.1) .438 (11.1) .040 (1.0)4300 CDS19FD432J03 500 .630 (16.0) .470 (11.9) .220 ( 5.6) .344 ( 8.7) .032 ( .8)4300 CDS30FD432J03 500 .720 (18.3) .790 (20.1) .200 ( 5.1) .438 (11.1) .040 (1.0)4700 CDS19FD472J03 500 .630 (16.0) .470 (11.9) .230 ( 5.8) .344 ( 8.7) .032 ( .8)4700 CDS30FD472J03 500 .720 (18.3) .790 (20.1) .210 ( 5.3) .438 (11.1) .040 (1.0)5000 CDS19FD502J03 500 .630 (16.0) .480 (12.2) .240 ( 6.1) .344 ( 8.7) .032 ( .8)5000 CDS30FD502J03 500 .720 (18.3) .790 (20.1) .210 ( 5.3) .438 (11.1) .040 (1.0)5100 CDS19FD512J03 500 .630 (16.0) .480 (12.2) .240 ( 6.1) .344 ( 8.7) .032 ( .8)5100 CDS30FD512J03 500 .720 (18.3) .790 (20.1) .210 ( 5.3) .438 (11.1) .040 (1.0)5600 CDS19FC562J03 300 .640 (16.3) .480 (12.2) .250 ( 6.4) .344 ( 8.7) .032 ( .8)5600 CDS30FD562J03 500 .720 (18.3) .790 (20.1) .220 ( 5.6) .438 (11.1) .040 (1.0)6200 CDS19FC622J03 300 .640 (16.3) .480 (12.2) .260 ( 6.6) .344 ( 8.7) .032 ( .8)6200 CDS30FD622J03 500 .730 (18.5) .800 (20.3) .220 ( 5.6) .438 (11.1) .040 (1.0)6800 CDS19FC682J03 300 .640 (16.3) .490 (12.4) .270 ( 6.9) .344 ( 8.7) .032 ( .8)6800 CDS30FD682J03 500 .730 (18.5) .800 (20.3) .230 ( 5.8) .438 (11.1) .040 (1.0)7500 CDS19FA752J03 100 .650 (16.5) .490 (12.4) .280 ( 7.1) .344 ( 8.7) .032 ( .8)7500 CDS30FD752J03 500 .730 (18.5) .800 (20.3) .240 ( 6.1) .438 (11.1) .040 (1.0)8200 CDS19FA822J03 100 .650 (16.5) .490 (12.4) .300 ( 7.6) .344 ( 8.7) .032 ( .8)8200 CDS30FD822J03 500 .730 (18.5) .800 (20.3) .250 ( 6.4) .438 (11.1) .040 (1.0)9100 CDS19FA912J03 100 .660 (16.8) .500 (12.7) .310 ( 7.9) .344 ( 8.7) .032 ( .8)9100 CDS30FD912J03 500 .730 (18.5) .800 (20.3) .260 (6.6) .438 (11.1) .040 (1.0)

10000 CDS19FA103J03 100 .670 (17.0) .510 (13.0) .320 ( 8.1) .344 ( 8.7) .032 ( .8)10000 CDS30FD103J03 500 .730 (18.5) .800 (20.3) .270 ( 6.9) .438 (11.1) .040 (1.0)11000 CDS30FD113J03 500 .740 (18.8) .810 (20.6) .280 ( 7.1) .438 (11.1) .040 (1.0)12000 CDS30FD123J03 500 .740 (18.8) .810 (20.6) .290 ( 7.4) .438 (11.1) .040 (1.0)13000 CDS30FD132J03 500 .740 (18.8) .810 (20.6) .300 ( 7.6) .438 (11.1) .040 (1.0)15000 CDS30FD153J03 500 .740 (18.8) .820 (20.8) .330 ( 8.4) .438 (11.1) .040 (1.0)16000 CDS30FD163J03 500 .740 (18.8) .820 (20.8) .340 ( 8.6) .438 (11.1) .040 (1.0)18000 CDS30FD183J03 500 .750 (19.1) .820 (20.8) .360 ( 9.1) .438 (11.1) .040 (1.0)20000 CDS30FD203J03 500 .750 (19.1) .830 (21.1) .380 ( 9.7) .438 (11.1) .040 (1.0)22000 CDS30FD223J03 500 .760 (19.3) .840 (21.4) .400 (10.2) .438 (11.1) .040 (1.0)24000 CDS30FC243J03 300 .740 (18.8) .820 (20.8) .340 (8.6) .438 (11.1) .040 (1.0)25000 CDS30FC253J03 300 .750 (19.1) .820 (20.8) .360 ( 9.1) .438 (11.1) .040 (1.0)27000 CDS30FC273J03 300 .750 (19.1) .820 (20.8) .360 ( 9.1) .438 (11.1) .040 (1.0)30000 CDS30FC303J03 300 .760 (19.3) .830 (21.1) .390 ( 9.9) .438 (11.1) .040 (1.0)33000 CDS30FA333J03 100 .750 (19.1) .830 (21.1) .380 ( 9.7) .438 (11.1) .040 (1.0)36000 CDS30FA363J03 100 .760 (19.3) .830 (21.1) .390 ( 9.9) .438 (11.1) .040 (1.0)40000 CDS30FA403J03 100 .760 (19.3) .830 (21.1) .410 (10.4) .438 (11.1) .040 (1.0)


Type CD16 & CDV16, Snubber and RF Application, Mica Capacitors

CORNELLDUBILIER


Radial LeadedM

ica Capacitors

Type CD16 & CDV16Mica Capacitors

LMax.

TMax.

470 ± 5%

1000VCDM H

Max.

1" Min..06 Max.No Solder

.032(#20 A.W.G.)

0.234 ±.031

Ideal for snubber and RF applications, CDV16 mica capacitors now

handle dV/dts up to 275,000 V/µs and they assure controlled,

resonance-free performance through 1 GHz.

Higher dV/dt Capability and Flatter Insertion LossNew CDV16/CD16 mica capacitors excel in bothsnubber applications and high-frequency applica-tions like RF and CATV.

Type CDV16’s high pulse current capability makethem ideal for pulse and snubber applications.CDV16 capacitors withstand an unlimited number ofpulses with a dV/dt of 275,000 V/µs. This is a 20%increase in dV/dt capability when compared to ourCDV19 mica capacitors and CDV16s are smaller too.CDV16 capacitors handle higher peak currents — up

to 825 amps. They also handle high continuous RMScurrent at 5 MHz and up to 30 MHz. For example, a470 pF CDV16 capacitor handles 6.2 A rms continu-ously at 13.56 MHz and it is 1/4 the cost of a compa-rable porcelain ceramic capacitor.

In addition to being great for snubbers, CDV16 is a fitfor your FR applications. Their compact size andcloser lead spacing improves insertion loss perfor-mance — insertion loss data is flat within +0.2 db,typically to beyond a gigahertz.

Performance Highlights• Capacitance Range: 100 pF to 7,500 pF• Capacitance Tolerance: ±5% (J) standard; ±1% (F)

and ±2% (G) available• Voltage: 500 Vdc & 1,000 Vdc• Temperature Range: –55°C to +125°C• dV/dt capability up to 275,000 V/µs• 1,500 amps peak current capability

• Handles up to 9.0 amps rms continuous current• Very low ESR from 10 to 100 MHz• Low, notch-free impedance to 1GHz• Stable: no capacitance change with voltage,

temperature and frequency• Tape and reeling available




Type CD16 & CDV16, Snubber and RF Application, Mica Capacitors

CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rs

Cap. Catalog L H T Ipk Maximum Continuous Current @ 85°C, AmpspF Number Inches (mm) Inches (mm) Inches (mm) Amps 100kHz 250 kHz 500 kHz 1MHz 2.5MHz 5MHz

500 Vdc (300 Vac)

100 CD16FD101J03 .43 (10.9) .46 (11.7) .15 (3.8) 20 .019 .047 .09 .19 .47 .78120 CD16FD121J03 .43 (10.9) .46 (11.7) .15 (3.8) 24 .023 .057 .11 .23 .57 .86150 CD16FD151J03 .43 (10.9) .46 (11.7) .15 (3.8) 30 .028 .071 .14 .28 .71 .96180 CD16FD181J03 .43 (10.9) .46 (11.7) .15 (3.8) 36 .034 .085 .17 .34 .85 1.1220 CD16FD221J03 .43 (10.9) .46 (11.7) .15 (3.8) 44 .041 .10 .21 .41 1.0 1.2

270 CD16FD271J03 .45 (11.4) .47 (11.9) .16 4.1) 54 .051 .13 .25 .51 1.3 1.3330 CD16FD331J03 .45 (11.4) .47 (11.9) .16 (4.1) 66 .062 .16 .31 .62 1.5 1.5390 CD16FD391J03 .45 (11.4) .47 (11.9) .16 (4.1) 78 .074 .18 .37 .74 1.6 1.6470 CD16FD471J03 .45 (11.4) .47 (11.9) .16 (4.1) 94 .089 .22 .44 .89 1.8 1.8560 CD16FD561J03 .46 (11.7) .50 (12.7) .18 (4.6) 110 .11 .26 .53 1.1 2.0 2.0

680 CD16FD681J03 .46 (11.7) .50 (12.7) .18 (4.6) 160 .15 .39 .77 1.5 2.5 2.5820 CD16FD821J03 .46 (11.7) .50 (12.7) .18 (4.6) 160 .15 .39 .77 1.5 2.5 2.5

1000 CD16FD102J03 .46 (11.7) .50 (12.7) .18 (4.6) 200 .19 .47 .94 1.9 2.7 2.71200 CD16FD122J03 .46 (11.7) .50 (12.7) .18 (4.6) 240 .23 .57 1.1 2.3 3.0 3.01500 CD16FD152J03 .46 (11.7) .50 (12.7) .18 (4.6) 300 .28 .71 1.4 2.7 3.3 3.3

1800 CD16FD182J03 .47 (11.9) .52 (13.2) .25 (6.4) 360 .34 .85 1.7 3.4 4.1 4.12200 CD16FD222J03 .47 (11.9) .52 (13.2) .25 (6.4) 440 .41 1.0 2.1 4.1 4.5 4.52700 CD16FD272J03 .47 (11.9) .52 (13.2) .25 (6.4) 540 .51 1.3 2.5 5.0 5.0 5.03000 CD16FD302J03 .47 (11.9) .52 (13.2) .25 (6.4) 600 .57 1.4 2.8 5.2 5.2 5.23300 CD16FD332J03 .48 (12.2) .53 (13.7) .28 (7.1) 600 .57 1.4 2.8 5.7 6.8 6.8

3600 CD16FD362J03 .48 (12.2) .53 (13.7) .28 (7.1) 720 .68 1.7 3.4 6.8 7.1 7.13900 CD16FD392J03 .48 (12.2) .54 (13.7) .28 (7.1) 780 .74 1.8 3.7 7.4 7.4 7.44300 CD16FD432J03 .48 (12.2) .54 (13.7) .28 (7.1) 860 .81 2.0 4.0 7.0 7.8 7.84700 CD16FD472J03 .49 (12.5) .56 (14.2) .31 (7.9) 940 .89 2.2 4.4 8.5 8.5 8.55600 CD16FD562J03 .49 (12.5) .56 (14.2) .33 (8.4) 1100 1.1 2.6 5.3 9.0 9.0 9.0

6800 CD16FD682J03 .50 (12.7) .57 (14.7) .38 (9.7) 1300 1.3 3.2 6.4 9.0 9.0 9.07500 CD16FD752J03 .50 (12.7) .58 (14.7) .40 (10.2) 1500 1.4 3.5 7.1 9.0 9.0 9.0

Cap. Catalog L H T Ipk Maximum Continuous Current @ 85°C, AmpspF Number Inches (mm) Inches (mm) Inches (mm) Amps 100kHz 250 kHz 500 kHz 1MHz 2.5MHz 5MHz

1,000 Vdc (350 Vac)

100 CDV16FF101J03 .43 (10.9) .46 (11.7) .15 (3.8) 23 .022 .055 .11 .22 .55 .92120 CDV16FF121J03 .43 (10.9) .46 (11.7) .15 (3.8) 27 .026 .066 .13 .26 .66 1.0130 CDV16FF131J03 .43 (10.9) .46 (11.7) .15 (3.8) 29 .029 .071 .14 .29 .71 1.1150 CDV16FF151J03 .43 (10.9) .46 (11.7) .15 (3.8) 34 .033 .082 .16 .33 .82 1.1180 CDV16FF181J03 .43 (10.9) .46 (11.7) .15 (3.8) 41 .040 .10 .20 .40 .99 1.2

200 CDV16FF201J03 .43 (10.9) .46 (11.7) .15 (3.8) 45 .044 .11 .22 .44 1.1 1.3220 CDV16FF221J03 .43 (10.9) .46 (11.7) .15 (3.8) 50 .048 .12 .24 .48 1.2 1.4240 CDV16FF241J03 .43 (10.9) .46 (11.7) .15 (3.8) 54 .053 .13 .26 .53 1.3 1.4270 CDV16FF271J03 .45 (11.4) .47 (11.9) .16 (4.1) 61 .059 .15 .30 .59 1.5 1.6300 CDV16FF301J03 .45 (11.4) .47 (11.9) .16 (4.1) 68 .066 .16 .33 .66 1.6 1.7

330 CDV16FF331J03 .45 (11.4) .47 (11.9) .16 (4.1) 74 .073 .18 .36 .73 1.8 1.8360 CDV16FF361J03 .45 (11.4) .47 (11.9) .16 (4.1) 81 .079 .20 .40 .79 1.8 1.8390 CDV16FF391J03 .45 (11.4) .47 (11.9) .16 (4.1) 88 .086 .21 .43 .86 1.9 1.9420 CDV16FF421J03 .45 (11.4) .47 (11.9) .16 (4.1) 95 .092 .23 .46 .92 2.0 2.0430 CDV16FF431J03 .45 (11.4) .47 (11.9) .16 (4.1) 97 .095 .24 .47 .95 2.0 2.0

470 CDV16FF471J03 .45 (11.4) .47 (11.9) .16 (4.1) 106 .10 .26 .52 1.0 2.1 2.1500 CDV16FF501J03 .45 (11.4) .47 (11.9) .16 (4.1) 113 .11 .27 .55 1.1 2.2 2.2510 CDV16FF511J03 .45 (11.4) .47 (11.9) .16 (4.1) 115 .11 .28 .56 1.1 2.2 2.2560 CDV16FF561J03 .46 (11.7) .50 (12.7) .17 (4.4) 126 .12 .31 .62 1.2 2.4 2.4620 CDV16FF621J03 .46 (11.7) .50 (12.7) .17 (4.4) 140 .14 .34 .68 1.4 2.5 2.5

680 CDV16FF681J03 .46 (11.7) .50 (12.7) .17 (4.4) 153 .15 .37 .75 1.5 2.7 2.7750 CDV16FF751J03 .46 (11.7) .50 (12.7) .17 (4.4) 169 .16 .41 .82 1.6 2.8 2.8820 CDV16FF821J03 .46 (11.7) .50 (12.7) .17 (4.4) 185 .18 .45 .90 1.8 2.9 2.9910 CDV16FF911J03 .46 (11.7) .50 (12.7) .17 (4.4) 205 .20 .50 1.0 2.0 3.1 3.1

1000 CDV16FF102J03 .46 (11.7) .50 (12.7) .17 (4.4) 225 .22 .55 1.1 2.2 3.2 3.2

1200 CDV16FF122J03 .46 (11.7) .50 (12.7) .17 (4.4) 270 .26 .66 1.3 2.6 3.5 3.51300 CDV16FF132J03 .46 (11.7) .50 (12.7) .17 (4.4) 293 .29 .71 1.4 2.9 3.7 3.71500 CDV16FF152J03 .46 (11.7) .50 (12.7) .18 (4.6) 338 .33 .82 1.6 3.3 3.9 3.91800 CDV16FF182J03 .47 (11.9) .52 (13.2) .25 (6.4) 495 .40 .99 2.0 4.0 4.8 4.82000 CDV16FF202J03 .47 (11.9) .52 (13.2) .25 (6.4) 605 .48 1.2 2.4 4.8 5.3 5.3

2200 CDV16FF222J03 .47 (11.9) .52 (13.2) .25 (6.4) 605 .48 1.2 2.4 4.8 5.3 5.32400 CDV16FF242J03 .47 (11.9) .52 (13.2) .25 (6.4) 660 .53 1.3 2.6 5.3 5.5 5.52700 CDV16FF272J03 .47 (11.9) .52 (13.2) .25 (6.4) 743 .59 1.5 3.0 5.8 5.8 5.83000 CDV16FF302J03 .47 (11.9) .52 (13.2) .25 (6.4) 825 .66 1.6 3.3 6.2 6.2 6.2



Types CD17, CD18 & CDV18, High-Frequency, Mica Capacitors

CORNELLDUBILIER


Radial LeadedM

ica Capacitors

High-Frequency Capacitors for CATV and RF Applications

Types CD17 and CD18 assure controlled,

reasonance-free performance through 1 GHz.

Insertion loss data is typically flat within ±0.1 dB

over the entire frequency range, and is specified

to be flat within ±0.2 dB. Interchangeable with

the most popular, common mica capacitors, Type

CD17 is available in the same case sizes and lead

spacing as CD15; CD18, in the same case sizes

and lead spacing as CD19, and CDV18, in the

same as CDV19.

• Voltage Range: 100 Vdc to 1,000 Vdc• Capacitance Range: 1 pF to 5,100 pF• Capacitance Tolerance: ±1⁄2 pF (D), ±1 pF (C), ±1⁄2% (E)

±1% (F), ±2% (G), ±5% (J)• Temperature Range: –55°C to +125°C• Low, notch-free impedance to beyond 1 GHz• Cool operation—typical Q > 2000• Shockproof and delamination free• Near zero capacitance change with frequency and

temperature• Zero capacitance change with voltage• 0.0005 typical dissipation factor• 100,000 V/µs dV/dt capability minimum


LMax.

TMax.

S±.031″

.078″ Max.no solder

H Max.

d

1″Min.


1 CD17CD010D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)2 CD17CD020D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)3 CD17CD030D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)4 CD17CD040D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)5 CD17CD050D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)6 CD17CD060D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)7 CD17CD070D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)8 CD17CD080D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)9 CD17CD090D03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)

10 CD17CD100J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)12 CD17CD120J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)15 CD17CD150J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)18 CD17CD180J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)20 CD17ED200J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)22 CD17ED220J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)24 CD17ED240J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)27 CD17ED270J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)27 CDV18EF270J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)30 CD17ED300J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)30 CDV18EF300J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)33 CD17ED330J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)33 CDV18EF330J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)36 CD17ED360J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)36 CDV18EF360J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)39 CD17ED390J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)

Cap Catalog Volt L H T S dpF Number Rate Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)39 CDV18EF390J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)43 CD17ED430J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)43 CDV18EF430J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)47 CD17ED470J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)47 CDV18EF470J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)50 CD17ED500J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)50 CDV18EF500J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)51 CD17ED510J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)51 CDV18EF510J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)56 CD17ED560J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)56 CDV18EF560J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)62 CD17ED620J03 500 .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .025 (.6)62 CDV18EF620J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)68 CD17ED680J03 500 .450 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .025 (.6)68 CDV18EF680J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)75 CD17ED750J03 500 .450 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .025 (.6)75 CDV18EF750J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)82 CD17ED820J03 500 .450 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .025 (.6)82 CDV18EF820J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)91 CD17FD910J03 500 .460 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .025 (.6)91 CDV18FF910J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)

100 CD17FD101J03 500 .460 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .025 (.6)100 CDV18FF101J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)110 CD17FD111J03 500 .460 (11.4) .370 ( 9.4) .180 (4.6) .234 (5.9) .025 (.6)110 CDV18FF111J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)




Types CD17, CD18 & CDV18, High-Frequency, Mica Capacitors

CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rs




120 CD17FD121J03 500 .460 (11.7) .370 ( 9.4) .180 (4.6) .234 (5.9) .025 (.6)120 CDV18FF121J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)130 CD17FD131J03 500 .460 (11.7) .370 ( 9.4) .180 (4.6) .234 (5.9) .025 (.6)130 CDV18FF131J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)150 CD17FD151J03 500 .460 (11.7) .370 ( 9.4) .190 (4.8) .234 (5.9) .025 (.6)150 CDV18FF151J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)160 CD17FD161J03 500 .460 (11.7) .370 ( 9.4) .190 (4.8) .234 (5.9) .025 (.6)160 CDV18FF161J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)180 CD17FD181J03 500 .460 (11.7) .370 ( 9.4) .190 (4.8) .234 (5.9) .025 (.6)180 CDV18FF181J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)200 CD17FD201J03 500 .460 (11.7) .380 ( 9.7) .190 (4.8) .234 (5.9) .025 (.6)200 CDV18FF201J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)220 CD17FD221J03 500 .460 (11.7) .380 ( 9.7) .200 (5.1) .234 (5.9) .025 (.6)220 CDV18FF221J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)240 CD17FD241J03 500 .460 (11.7) .380 ( 9.7) .200 (5.1) .234 (5.9) .025 (.6)240 CDV18FF241J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)250 CD17FD251J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)270 CD17FD271J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)270 CD18FD271J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)270 CDV18FF271J03 1000 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)300 CD17FD301J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)300 CD18FD301J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)300 CDV18FF301J03 1000 .650 (16.5) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)330 CD17FD331J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)330 CD18FD331J03 500 .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .032 (.8)330 CDV18FF331J03 1000 .650 (16.5) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)360 CD17FD361J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)360 CD18FD361J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)360 CDV18FF361J03 1000 .650 (16.5) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)390 CD17FD391J03 500 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)390 CD18FD391J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)390 CDV18FF391J03 1000 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)430 CD17FD431J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 (5.9) .025 (.6)430 CD18FD431J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)430 CDV18FF431J03 1000 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)470 CD17FD471J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 (5.9) .025 (.6)470 CD18FD471J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)470 CDV18FF471J03 1000 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)500 CD17FD501J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 (5.9) .025 (.6)500 CD18FD501J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)510 CD17FD511J03 500 .470 (11.9) .400 (10.2) .220 (5.6) .234 (5.9) .025 (.6)510 CD18FD511J03 500 .640 (16.3) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)510 CDV18FF511J03 1000 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)560 CD17FC561J03 300 .460 (11.7) .380 ( 9.7) .210 (5.3) .234 (5.9) .025 (.6)560 CD18FD561J03 500 .650 (16.5) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)

560 CDV18FF561J03 1000 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)620 CD17FC621J03 300 .460 (11.7) .380 ( 9.7) .210 (5.3) .234 (5.9) .025 (.6)620 CD18FD621J03 500 .650 (16.5) .510 (13.0) .200 (5.1) .344 (8.7) .032 (.8)620 CDV18FF621J03 1000 .660 (16.8) .520 (13.2) .220 (5.6) .344 (8.7) .032 (.8)680 CD17FC681J03 300 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)680 CD18FD681J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)680 CDV18FF681J03 1000 .660 (16.8) .520 (13.2) .220 (5.6) .344 (8.7) .032 (.8)750 CD17FC751J03 300 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)750 CD18FD751J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)750 CDV18FF751J03 1000 .660 (16.8) .530 (13.5) .230 (5.8) .344 (8.7) .032 (.8)820 CD17FC821J03 300 .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) .025 (.6)820 CD18FD821J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)820 CDV18FF821J03 1000 .660 (16.8) .530 (13.5) .230 (5.8) .344 (8.7) .032 (.8)910 CD17FA911J03 100 .470 (11.9) .390 ( 9.9) .220 (5.6) .234 (5.9) .025 (.6)910 CD18FD911J03 500 .650 (16.5) .510 (13.0) .210 (5.3) .344 (8.7) .032 (.8)

1000 CD17FA102J03 100 .480 (12.2) .400 (10.2) .230 (5.8) .234 (5.9) .025 (.6)1000 CD18FD102J03 500 .650 (16.5) .520 (13.2) .220 (5.6) .344 (8.7) .032 (.8)1100 CD17FA112J03 100 .490 (12.4) .420 (10.7) .240 (6.1) .234 (5.9) .025 (.6)1100 CD18FD112J03 500 .650 (16.5) .520 (13.2) .220 (5.6) .344 (8.7) .032 (.8)1200 CD17FA122J03 100 .490 (12.4) .420 (10.7) .240 (6.1) .234 (5.9) .025 (.6)1200 CD18FD122J03 500 .660 (16.8) .520 (13.2) .220 (5.6) .344 (8.7) .032 (.8)1300 CD18FD132J03 500 .660 (16.8) .520 (13.2) .220 (5.6) .344 (8.7) .032 (.8)1500 CD17FA152J03 100 .500 (12.7) .430 (10.9) .250 (6.4) .234 (5.9) .025 (.6)1500 CD18FD152J03 500 .660 (16.8) .520 (13.2) .230 (5.8) .344 (8.7) .032 (.8)1600 CD18FD162J03 500 .660 (16.8) .530 (13.5) .230 (5.8) .344 (8.7) .032 (.8)1800 CD18FD182J03 500 .670 (17.0) .530 (13.5) .240 (6.1) .344 (8.7) .032 (.8)2000 CD18FD202J03 500 .670 (17.0) .530 (13.5) .240 (6.1) .344 (8.7) .032 (.8)2200 CD18FD222J03 500 .670 (17.0) .530 (13.5) .250 (6.4) .344 (8.7) .032 (.8)2400 CD18FD242J03 500 .670 (17.0) .540 (13.7) .260 (6.6) .344 (8.7) .032 (.8)2500 CD18FD252J03 500 .680 (17.3) .540 (13.7) .260 (6.6) .344 (8.7) .032 (.8)2700 CD18FD272J03 500 .680 (17.3) .540 (13.7) .270 (6.9) .344 (8.7) .032 (.8)3000 CD18FD302J03 500 .680 (17.3) .550 (14.0) .280 (7.1) .344 (8.7) .032 (.8)3300 CD18FD332J03 500 .680 (17.3) .550 (14.0) .290 (7.4) .344 (8.7) .032 (.8)3600 CD18FD362J03 500 .680 (17.3) .560 (14.2) .300 (7.6) .344 (8.7) .032 (.8)3900 CD18FD392J03 500 .690 (17.5) .560 (14.2) .310 (7.9) .344 (8.7) .032 (.8)4300 CD18FD432J03 500 .690 (17.5) .570 (14.5) .330 (8.4) .344 (8.7) .032 (.8)4700 CD18FD472J03 500 .700 (17.8) .580 (14.7) .350 (8.9) .344 (8.7) .032 (.8)5000 CD18FD502J03 500 .710 (18.0) .590 (15.0) .370 (9.4) .344 (8.7) .032 (.8)5100 CD18FD512J03 500 .710 (18.0) .590 (15.0) .370 (9.4) .344 (8.7) .032 (.8)


Type CD4, High-Frequency, Mica Capacitors

CORNELLDUBILIER


Radial LeadedM

ica Capacitors

Ultra-High-Frequency Capacitor for CATV and RF Applications0.1″ Lead Spacing

Cap Catalog L H T S dpF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

500 Vdc (cont’d)39 CD4ED390J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)43 CD4ED430J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)47 CD4ED470J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)50 CD4ED500J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)51 CD4ED510J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)56 CD4ED560J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)62 CD4ED620J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)68 CD4ED680J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)75 CD4ED750J03 .290 (7.4) .230 (5.8) .110 (2.8) .100 (2.5) .020 (.5)82 CD4ED820J03 .290 (7.4) .230 (5.8) .110 (2.8) .100 (2.5) .020 (.5)91 CD4FD910J03 .290 (7.4) .230 (5.8) .110 (2.8) .100 (2.5) .020 (.5)

100 CD4FD101J03 .290 (7.4) .240 (6.1) .110 (2.8) .100 (2.5) .020 (.5)110 CD4FD111J03 .290 (7.4) .240 (6.1) .110 (2.8) .100 (2.5) .020 (.5)120 CD4FD121J03 .290 (7.4) .240 (6.1) .110 (2.8) .100 (2.5) .020 (.5)130 CD4FD131J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)150 CD4FD151J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)160 CD4FD161J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)180 CD4FD181J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)200 CD4FD201J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)220 CD4FD221J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)240 CD4FD241J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)250 CD4FD251J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)270 CD4FD271J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)300 CD4FD301J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)330 CD4FD331J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)360 CD4FD361J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)390 CD4FD391J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)430 CD4FD431J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)470 CD4FD471J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)500 CD4FD501J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)510 CD4FD511J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)


100 Vdc910 CD4FA911J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)

1000 CD4FA102J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)1100 CD4FA112J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)1200 CD4FA122J03 .340 (8.6) .310 (7.9) .170 (4.3) .100 (2.5) .020 (.5)1500 CD4FA152J03 .340 (8.6) .310 (7.9) .180 (4.6) .100 (2.5) .020 (.5)

300 Vdc560 CD4FC561J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)620 CD4FC621J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)680 CD4FC681J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)750 CD4FC751J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)820 CD4FC821J03 .340 (8.6) .310 (7.9) .160 (4.1) .100 (2.5) .020 (.5)

500 Vdc1 CD4CD010D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)2 CD4CD020D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)3 CD4CD030D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)4 CD4CD040D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)5 CD4CD050D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)6 CD4CD060D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)7 CD4CD070D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)8 CD4CD080D03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)

10 CD4CD100J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)12 CD4CD120J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)15 CD4CD150J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)18 CD4CD180J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)20 CD4ED200J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)22 CD4ED220J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)24 CD4ED240J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)27 CD4ED270J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)30 CD4ED300J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)33 CD4ED330J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)36 CD4ED360J03 .290 (7.4) .220 (5.6) .110 (2.8) .100 (2.5) .020 (.5)

• Voltage Range: 100 Vdc to 500 Vdc• Capacitance Range: 1 pF to 1,500 pF• Capacitance Tolerance: ±1⁄2 pF (D), ±1 pF (C), ±1⁄2% (E)

±1% (F), ±2% (G), ±5% (J)• Temperature Range: –55°C to +125°C• Higher self-resonant frequency and lower equivalent

series inductance than CD17 and CD18• Low impedance to beyond 1 GHz• Replaces other 0.1″ lead-spacing capacitors• Cool operation—Typical Qs > 2000• Shockproof and delamination free• Near zero capacitance change with frequency and

temperature

• Zero capacitance change with voltage• 0.0005 typical dissipation factor• 100,000 V/µs dV/dt capability minimum

LMAX

MEASURED ATPOINT WHEREPHENOLIC CONEBECOMES ACYLINDER

.06″ MAXno solder 1″

MIN

HMAX

TMAX

S±.03″

d

Radi

al L

eade

dM

ica

Capa

cito

rs




CORNELLDUBILIER


High-Frequency, Mica Capacitors

Type CD4 Typical Characteristics

Insertion Loss

Choosing CD4, CD16, CDV16, CD18 or CDV18

Radial LeadedM

ica Capacitors


CORNELLDUBILIER


Type CDA15, Especially for Reel-Packed, Mica Capacitors

Best Value Choice for Auto Insertion Applications

Designed especially for auto-insertion, Type

CDA15 capacitors are the best value choice for

tape and reel and ammo-pack feed systems.

CDA15 is used in commercial and industrial

applications requiring high stability, high Q, and

close capacitance tolerances. Type CDA15 is ideal

for tuned circuits, delay lines, and filter circuits.

• Voltage Range: 100 Vdc to 500 Vdc• Capacitance Range: 1 pF to 1,500 pF• Capacitance Tolerance: ±1⁄2 pF (D), ±1pF (C), ±1⁄2% (E),

±1% (F), ±2% (G), ±5% (J)• Temperature Range: –55°C to +125°C (O)

–55°C to +150°C (P)• 100,000 V/µs dV/dt capability minimum• .200″ lead spacing• Straight or Crimp Leads Available• Lead Material: Copper• Available only in tape/reel or ammo pack

Cap Catalog L H T SpF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm)

100 Vdc910 CDA15FA911J03 .450 (11.4) .400 (10.2) .170 (4.3) .200 (5.1)

1000 CDA15FA102J03 .450 (11.4) .400 (10.2) .170 (4.3) .200 (5.1)1100 CDA15FA112J03 .460 (11.7) .400 (10.2) .180 (4.6) .200 (5.1)1200 CDA15FA122J03 .460 (11.7) .420 (10.7) .180 (4.6) .200 (5.1)1500 CDA15FA152J03 .460 (11.7) .430 (10.9) .180 (4.6) .200 (5.1)

300 Vdc560 CDA15FC561J03 .450 (11.4) .380 ( 9.7) .160 (4.1) .200 (5.1)620 CDA15FC621J03 .450 (11.4) .380 ( 9.7) .160 (4.1) .200 (5.1)680 CDA15FC681J03 .450 (11.4) .390 ( 9.9) .160 (4.1) .200 (5.1)750 CDA15FC751J03 .450 (11.4) .390 ( 9.9) .170 (4.3) .200 (5.1)820 CDA15FC821J03 .450 (11.4) .390 ( 9.9) .170 (4.3) .200 (5.1)

500 Vdc1 CDA15CD010D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)2 CDA15CD020D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)3 CDA15CD030D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)4 CDA15CD040D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)5 CDA15CD050D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)6 CDA15CD060D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)7 CDA15CD070D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)8 CDA15CD080D03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)

10 CDA15CD100J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)12 CDA15CD120J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)15 CDA15CD150J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)18 CDA15CD180J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)20 CDA15ED200J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)22 CDA15ED220J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)24 CDA15ED240J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)27 CDA15ED270J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)30 CDA15ED300J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)33 CDA15ED330J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)36 CDA15ED360J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)39 CDA15ED390J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)43 CDA15ED430J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)47 CDA15ED470J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)50 CDA15ED500J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)51 CDA15ED510J03 .430 (10.9) .360 ( 9.1) .140 (3.6) .200 (5.1)

Cap Catalog L H T SpF Number Inches (mm) Inches (mm) Inches (mm) Inches (mm)

500 Vdc (cont’d)56 CDA15ED560J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)62 CDA15ED620J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)68 CDA15ED680J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)75 CDA15ED750J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)82 CDA15ED820J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)91 CDA15FD910J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)

100 CDA15FD101J03 .430 (10.9) .360 (9.1) .140 (3.6) .200 (5.1)110 CDA15FD111J03 .440 (11.2) .360 (9.1) .150 (3.8) .200 (5.1)120 CDA15FD121J03 .440 (11.2) .360 (9.1) .150 (3.8) .200 (5.1)130 CDA15FD131J03 .440 (11.2) .360 (9.1) .150 (3.8) .200 (5.1)150 CDA15FD151J03 .440 (11.2) .360 (9.1) .150 (3.8) .200 (5.1)160 CDA15FD161J03 .440 (11.2) .360 (9.1) .150 (3.8) .200 (5.1)180 CDA15FD181J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)200 CDA15FD201J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)220 CDA15FD221J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)240 CDA15FD241J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)250 CDA15FD251J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)270 CDA15FD271J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)300 CDA15FD301J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)330 CDA15FD331J03 .440 (11.2) .360 (9.1) .160 (4.1) .200 (5.1)360 CDA15FD361J03 .440 (11.2) .370 (9.4) .160 (4.1) .200 (5.1)390 CDA15FD391J03 .440 (11.2) .370 (9.4) .160 (4.1) .200 (5.1)430 CDA15FD431J03 .440 (11.2) .380 (9.7) .160 (4.1) .200 (5.1)470 CDA15FD471J03 .440 (11.2) .380 (9.7) .160 (4.1) .200 (5.1)500 CDA15FD501J03 .440 (11.2) .380 (9.7) .160 (4.1) .200 (5.1)510 CDA15FD511J03 .440 (11.2) .380 (9.7) .160 (4.1) .200 (5.1)

L max.T max.

H max.

.050

h ± .020

.709 + .039– .020

.354 + .030– .020

.500 ± .012

S ± .031.157 ±.012.035 max.

See Ordering Information on page 4.019.

.152 ± .028

.250 ± 051

Radi

al L

eade

dM

ica

Capa

cito

rs




CORNELLDUBILIER


Specifications, Radial-Leaded, Mica Capacitors

Specifications

Capacitance is within tolerancewhen measured at these frequen-cies:

1–1000 pF @ 1MHz> 1000 pF @ 1 kHz

Dissipation Factor limits arebelow. Dissipation factor is equalto DF=2πfRC, where f is the test fre-quency, R is the equivalent seriesresistance, and C is the capaci-tance. For other capacitance val-ues, see Figure 1. Capacitance Dissipation Factor 75–1,000 pF 0.00075 max at 1 MHz 1,100–3,300 pF 0.0014 max at 1 kHz 3,600–9,100 pF 0.0013 max at 1 kHz 10,000 pF 0.0012 max at 1 kHz

Quality Factor (Q) is the re-ciprocal of dissipation factor.

Insulation Resistance for ca-pacitances up to 10,000 pF isgreater than 100 GΩ at 25°C andgreater than 10 GΩ at 125°C. Forother capacitance values and tem-peratures, see Figure 2.

Withstanding Voltage is 2times the rated voltage, and can beapplied up to 5 seconds withoutdamage.

Temperature Coefficientand Capacitance Drift: Mea-sure the capacitors’ capacitance at25°C, –55°C, 25°C, 125°C (or150°C) and at 25°C after stabilizingat each temperature. The capaci-tance will meet the limits of theCharacteristic table shown in Or-dering Information.

Solderability: After an eight-hour steam aging, coat leads withrosin flux (R) and immerse in mol-ten 245°C ± 5°C 60/40 tin/lead sol-der. Solder coverage will be no lessthan 95% when examined at 10Xmagnification.

Surge Voltage: Standarddipped capacitors will withstand500 Vdc max peak transientsabove rated voltage. For example,in flyback regulators with less than500 Vdc bias, you may use 500Vdc-rated capacitors provided thatthe switching transient peaks areless than 1,000 V.

Voltage Coefficient: Thechange in capacitance from 0 voltsto rated voltage is less than 0.1%.

Pulse Handling: Standarddipped capacitors will withstandan unlimited number of pulseswith a dV/dt of 100,000 V/µs testedper IEC 384-1. Smaller capacitanceratings can withstand even fasterdV/dt—ratings have been testedone million discharges at ratedvoltage into a 4.7Ω resistor with nochange in capacitance. For a 100pF, 500 Vdc unit, that’s a peak dV/dt in excess of 1,000,000 V/µs. ThedV/dt is expressed by this relation-ship:

dV/dt = VRdC

RV =rated voltage, VdcRd =minimum discharge resistor, ΩdC =rated capacitance, µFThis is the initial rate of dischargeinto Rd.

Marking is in accordance withEIA RS153B and includes “CD” asour manufacturer’s symbol, nomi-nal capacitance in pF, capacitancetolerance, and dc working voltagefollowed by V, if other than 500Vdc.

Miniature dipped units (CD6 andCD7) are marked with capacitancein pF and tolerance letter designa-tion.

MIL-C-5 units (Type CM) are in ac-cordance with MIL-C-5.

Figure 1. DF vs. Capacitance Figure 2. IR vs. Capacitance

100,000

10,000

1,000

100INSU

LATI

ON

RES

ISTA

NCE

(M

EGO

HM

S)

5 10 100 1,000 10,000 62,000

CAPACITANCE (pF)

+25°C

+85°C+125°C

+150°C

DIS

SIPA

TIO

N F

ACTO

R

.10

.01

.001

.00011 10 100 1,000 10,000 100,000

CAPITANCE (pF)

Maximum dissipation factorat 1 MHz for capacitancevalues of 1,000 pF or less

Maximum dissipation factorat 1 kHz for capacitancevalues greater than 1,000 pF

Radial LeadedM

ica Capacitors


CORNELLDUBILIER


Specifications, Radial-Leaded, Mica Capacitors

Specifications

Moisture Resistance: Capaci-tors will meet the requirements ofMIL-STD-202, Method 106F as out-lined here and diagrammed on theright. Refer to MIL-STD-202 for de-tails. For miniature Types CD6 andCD7, use one 24-hour cycle ratherthan 10.1. Dry capacitors for 24 hours in a

50±2°C oven and then allow tostabilize at room temperature.

2. Subject the capacitors to 10 24-hour continuous cycles withrelative humidity and tempera-ture as shown.

3. 24 hours after completion of thelast cycle, the capacitors willshow no visual damage and willmeet the after-test limits below.

Life Test: Subject the capaci-tors to maximum operatingtemperature (+125°C or +150°C)

with 1.5 times rated voltage ap-plied for 2,000 hours. There willbe no visual damage and the

capacitors will meet the after-testlimits below.

After-Test Limits

Test Withstand Insulation Capacitance Change DF QVoltage Resistance (whichever is greater)

Moisture Resistance IL 30 GΩ NV±1% or ±1 pF 150% IL 2/3xILLife Test IL IL NV±1% or ±1 pF 150% IL 2/3xIL

IL=Initial Limit NV=Nominal Value

24-Hour Moisture Resistance Cycle65±2°C

90–98% RH

21⁄2 3 21⁄2hours

21⁄2 3 21⁄2

8

31–4

25±2°C90–98% RH

–10±2°Cuncontrolled

humidity




CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rsOrdering Information, Radial-Leaded, Mica Capacitors


Order by complete part number as below. For other options, writeyour requirements on your purchase order or request for quotation.

Radial-Leaded Silvered Mica Capacitors (except D7, D10*)

CD15 C D 100 J O 3

Voltage Capacitance Temperature RangeCDE Y=50 Vdc F=1000 Vdc 010=1pF 0=–55°C to +125°CType A=100 Vdc H=1500 Vdc 1R5=1.5 pF P=–55°C to +150°C

C=300 Vdc J=2000 Vdc 361=360 pFD=500 Vdc K=2500 Vdc 122=1200 pF

Characteristic Vibration GradeTemp. Coeff. Capacitance Standard Cap. Vibration

ppm/°C Drift Range Number MIL-STD-202 Condition (Hz)

C –200 to +200 ±(0.5% +0.1pF) 1–18 pF 1 Method 201 10 to 55,00E 0–20 to +100 ±(0.1% +0.1 pF) 20–82 pF 3 Method 204 10 to 2,000F 0–20 to0 +70 ±(0.05% +0.1 pF) 91 pF and up Condition D

Standard vibration grade is 3, the more severe requirement.


Tol. CapacitanceCode Tolerance Range

C ±1 pF 1– 9 pFD ±1⁄2 pF 1–24 pFE ±1⁄2 % 100 pF and upF ±1 % 50 pF and upG ±2 % 25 pF and upH ±3 % 18 pF and upJ ±5 % 10 pF and up

Options Available• Non-flammable units per IEC 695-2-2 are available for

standard dipped capacitors. Specify IEC 695-2-2 on yourorder.

• Tape and reeling, specify per next page.• “P” temperature range available for CD10, CD15,

CD19, CD30, CD42, CDA15.• For MIL-C-5 capacitors, see below.

MIL-C-5 Capacitors

Standard tolerance is ±1⁄2 pF for less than 10 pF and±5% for 10 pF and up.

Capacitors are available marked and manufactured tothe requirements of standard MIL-C-5. To order theMIL-C-5 part number, change the Catalog Number by

replacing the CDE Type with the MIL-C-5 Style Num-ber using the table below. Example: ChangeCD15ED470J03 to CM05ED470J03.

The following ratings have no MIL-C-5 equivalents:

Type CD10: 2, 3, 4, 50, 250 and 400 pF

Type CD15: 2, 3, 4, 50, 250, 430 and higher pF

Type CD19: 390 and lower pF, 2,500 pF, and5,000 and higher pF

Type CD30: 5,000 and lower pF,22,000 and higher pF

CDE MIL-C-5Type Number Style Number

CD10 CM04CD15 CM05CD19 CM06CD30 CM07

010 = 1pF1R5 = 1.5 pF361 = 360 pF122 = 1200 pF

Y = 50 Vdc F =1000 VdcA = 100 Vdc H=1500 VdcC = 300 Vdc J =2000 VdcD= 500 Vdc K =2500 Vdc

*Order Types D7 and D10 using the Catalog Numbers shown in the ratings tables.


CORNELLDUBILIER


Radial LeadedM

ica CapacitorsOrdering Information, Radial-Leaded, Mica Capacitors


Dipped Mica Capacitors for Auto InsertionFor tape and reel or ammo-packed packaging, specifyon the order.

For high-volume auto insertion applications, the best-value choice is Type CDA15. Reel packing is also avail-able for Types CD4, CD5, CD6, CD7, CD10, CD15,CD17, CD19, CM04, and CM05.

Reel Packing with .200″ lead spacing is available forTypes CD5, CD6, CD7, and CD10. To order .200″ leadspacing, change the Catalog Number by inserting theletter “A” in the CDE Type. Example: Type CD5 ca-pacitors, reel packed with .200" lead spacing, is desig-nated as Type CDA5.

See the table below for available reel-packed types,lead configurations, lead spacing, lead material, piecesper reel and pieces per ammo packs.

Packaging will be in accordance with EIA-468. Dimen-sion h will be 16mm for formed leads or 18mm forstraight leads. 20mm is available on special request.Specify reel or ammo on your purchase order.

Range of Range ofType Lead Lead Lead Capacitance Pieces per Pieces per

Number Spacing Configuration Material Range Reel Ammo PackCD4 .100 A CCS 1– 560 pF 1000–2500 1000–2000

561– 780 pF 1000–2000 1000–1500781–1500 pF 1000–1500 1000

CD5 .120 A CCS 1–158 pF 1000–2500 1000–2000159–256 pF 1000–2000 1000–1500

CDA5 .200 B CCS 257–400 pF 1000–1500 1000CD6 .172 A CCS 1– 120 pF 1000–2500 1000–2000

CDA6 .200 A CCSCD7 .172 A CCS 1– 560 pF 1000–2500 1000–2000

CDA7 .200 A (up to 820 pF) CCS 561– 780 pF 1000–2000 1000–1500C (all values) 781–1500 pF 1000–1500 1000

D10 1– 265 pF 1000–2500 1000–2000CD10/CM04 .141 A CCS 266– 470 pF 1000–2000 1000–1500

CDA10 .200 C CCS 471–1200 pF 1000–1500 1000CD15/CM05 .234 A CCS 1– 330 pF 1000–2500 1000–2000

CD17 331– 470 pF 1000–2000 1000–1500471–1500 pF 1000–1500 1000

CD16 .234 A CCS 1– 330 pF 1000–2500 1000–2000CDV16 331– 470 pF 1000–2000 1000–1500

471–1500 pF 1000–1500 10001501–2000 pF 800 600

> 2000 pF 500 600CDA15 .200 A, C Copper 1– 330 pF 1000–2500 1000–2000CDA17 331– 470 pF 1000–2000 1000–1500

471–1500 pF 1000–1500 1000CD19 .344 A CCS 10-1000 pF 1000 800

1001-1500 pF 800 8001501–3000 pF 600 6003001-5000 pF 400 400

L max.T max.

H max.

.078

h ± .020.250 ± .051

.709 + .039– .020

.354 + .030– .020

.202 ± .028S ± .031

.157 ± .012.035 max.

Lead Configurations

.500 ± .012

A B C

CDA indicates .200 lead spacing for a bulk part. If you want it configured for auto insertion, it must be so noted on the order (i.e. tape/reel or ammo pack thereferenced parts)

CCS = copper-clad steel




CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito

rsType CMR, High-Reliability, Mica Capacitors


50 Vdc22 CMR03E220DOYR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)24 CMR03E240DOYR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)27 CMR03E270JOYR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)30 CMR03E300JOYR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)33 CMR03E330JOYR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)36 CMR03E360JOYR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)39 CMR03E390JOYR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)43 CMR03E430JOYR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)47 CMR03E470JOYR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)51 CMR03E510JOYR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)56 CMR03E560JOYR .270 (6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)62 CMR03E620JOYR .270 (6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)68 CMR03E680JOYR .270 (6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)75 CMR03E750JOYR .270 (6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)82 CMR03E820JOYR .270 (6.9) .200 (5.1) .120 (3.0) .120 (3.0) .016 (.4)91 CMR03F910JOYR .270 (6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)

100 CMR03F101JOYR .270 (6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)110 CMR03F111JOYR .270 (6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)120 CMR03F121JOYR .270 (6.9) .200 (5.1) .130 (3.3) .120 (3.0) .016 (.4)130 CMR03F131JOYR .270 (6.9) .210 (5.3) .130 (3.3) .120 (3.0) .016 (.4)150 CMR03F151JOYR .270 (6.9) .210 (5.3) .140 (3.6) .120 (3.0) .016 (.4)160 CMR03F161JOYR .270 (6.9) .210 (5.3) .140 (3.6) .120 (3.0) .016 (.4)180 CMR03F181JOYR .270 (6.9) .210 (5.3) .140 (3.6) .120 (3.0) .016 (.4)200 CMR03F201JOYR .270 (6.9) .220 (5.6) .150 (3.8) .120 (3.0) .016 (.4)220 CMR03F221JOYR .270 (6.9) .220 (5.6) .150 (3.8) .120 (3.0) .016 (.4)240 CMR03F241JOYR .270 (6.9) .220 (5.6) .160 (4.1) .120 (3.0) .016 (.4)270 CMR03F271JOYR .270 (6.9) .230 (5.8) .160 (4.1) .120 (3.0) .016 (.4)300 CMR03F301JOYR .270 (6.9) .230 (5.8) .170 (4.3) .120 (3.0) .016 (.4)330 CMR03F331JOYR .270 (6.9) .240 (6.1) .180 (4.6) .120 (3.0) .016 (.4)360 CMR03F361JOYR .270 (6.9) .240 (6.1) .180 (4.6) .120 (3.0) .016 (.4)390 CMR03F391JOYR .270 (6.9) .250 (6.4) .190 (4.8) .120 (3.0) .016 (.4)400 CMR03F401JOYR .270 (6.9) .250 (6.4) .190 (4.8) .120 (3.0) .016 (.4)

100 Vdc15 CMR03C150DOAR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)18 CMR03C180DOAR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)20 CMR03E200DOAR .270 (6.9) .190 (4.8) .110 (2.8) .120 (3.0) .016 (.4)22 CMR03E220DOAR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)24 CMR03E240DOAR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)27 CMR03E270JOAR .270 (6.9) .190 (4.8) .120 (3.0) .120 (3.0) .016 (.4)


100 Vdc (cont’d)30 CMR03E300JOAR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)33 CMR03E330JOAR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)36 CMR03E360JOAR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)39 CMR03E390JOAR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)43 CMR03E430JOAR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)47 CMR03E470JOAR .270 ( 6.9) .200 ( 5.1) .130 ( 3.3) .120 ( 3.0) .016 ( .4)51 CMR03E510JOAR .270 ( 6.9) .200 ( 5.1) .130 ( 3.3) .120 ( 3.0) .016 ( .4)56 CMR03E560JOAR .270 ( 6.9) .200 ( 5.1) .130 ( 3.3) .120 ( 3.0) .016 ( .4)62 CMR03E620JOAR .270 ( 6.9) .210 ( 5.3) .130 ( 3.3) .120 ( 3.0) .016 ( .4)68 CMR03E680JOAR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)75 CMR03E750JOAR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)82 CMR03E820JOAR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)91 CMR03F910JOAR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)

100 CMR03F101JOAR .270 ( 6.9) .220 ( 5.6) .150 ( 3.8) .120 ( 3.0) .016 ( .4)110 CMR03F111JOAR .270 ( 6.9) .220 ( 5.6) .150 ( 3.8) .120 ( 3.0) .016 ( .4)120 CMR03F121JOAR .270 ( 6.9) .220 ( 5.6) .160 ( 4.1) .120 ( 3.0) .016 ( .4)130 CMR03F131JOAR .270 ( 6.9) .230 ( 5.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)150 CMR03F151JOAR .270 ( 6.9) .230 ( 5.8) .170 ( 4.3) .120 ( 3.0) .016 ( .4)160 CMR03F161JOAR .270 ( 6.9) .240 ( 6.1) .170 ( 4.3) .120 ( 3.0) .016 ( .4)170 CMR03F171JOAR .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)180 CMR03F181JOAR .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)200 CMR03F201JOAR .270 ( 6.9) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)330 CMR04F331JOAR .390 ( 9.9) .380 ( 9.7) .220 ( 5.6) .150 ( 3.8) .016 ( .4)360 CMR04F361JOAR .390 ( 9.9) .380 ( 9.7) .220 ( 5.6) .150 ( 3.8) .016 ( .4)390 CMR04F391JOAR .390 ( 9.9) .380 ( 9.7) .220 ( 5.6) .150 ( 3.8) .016 ( .4)

300 Vdc1 CMR03C1R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)1.5 CMR03C1R5DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)2 CMR03C2R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)2.5 CMR03C2R5DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)3 CMR03C3R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)3.5 CMR03C3R5DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)4 CMR03C4R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)4.5 CMR03C4R5DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)5 CMR03C5R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)6 CMR03C6R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)


CORNELLDUBILIER


Radial LeadedM

ica CapacitorsType CMR, High-Reliability, Mica Capacitors



500 Vdc (con’d)22 CMR05E220J0DR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)24 CMR04E240JODR .360 ( 9.1) .330 ( 8.4) .190 (4.8) .150 (3.8) .016 (.4)24 CMR05E240JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)27 CMR04E270JODR .370 ( 9.4) .330 ( 8.4) .190 (4.8) .150 (3.8) .016 (.4)27 CMR05E270JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)30 CMR04E300JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)30 CMR05E300JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)33 CMR04E330JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)33 CMR05E330JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)36 CMR04E360JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)36 CMR05E360JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)39 CMR04E390JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)39 CMR05E390JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)43 CMR04E430JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)43 CMR05E430JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)47 CMR04E470JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)47 CMR05E470JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)51 CMR04E510JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)51 CMR05E510JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)56 CMR04E560JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)56 CMR05E560JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)62 CMR04E620JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)62 CMR05E620JODR .450 (11.4) .360 ( 9.1) .170 (4.3) .225 (5.7) .025 (.6)68 CMR04E680JODR .370 ( 9.4) .340 ( 8.6) .190 (4.8) .150 (3.8) .016 (.4)68 CMR05E680JODR .450 (11.4) .360 ( 9.1) .180 (4.6) .225 (5.7) .025 (.6)75 CMR04E750JODR .370 ( 9.4) .340 ( 8.6) .200 (5.1) .150 (3.8) .016 (.4)75 CMR05E750JODR .450 (11.4) .360 ( 9.1) .180 (4.6) .225 (5.7) .025 (.6)82 CMR04E820JODR .370 ( 9.4) .350 ( 8.9) .200 (5.1) .150 (3.8) .016 (.4)82 CMR05E820JODR .450 (11.4) .360 ( 9.1) .180 (4.6) .225 (5.7) .025 (.6)91 CMR04F910JODR .370 ( 9.4) .350 ( 8.9) .200 (5.1) .150 (3.8) .016 (.4)91 CMR05F910JODR .460 (11.7) .360 ( 9.1) .180 (4.6) .225 (5.7) .025 (.6)

100 CMR04F101JODR .370 ( 9.4) .350 ( 8.9) .200 (5.1) .150 (3.8) .016 (.4)100 CMR05F101JODR .460 (11.7) .360 ( 9.1) .180 (4.6) .225 (5.7) .025 (.6)110 CMR04F111JODR .380 ( 9.7) .350 ( 8.9) .200 (5.1) .150 (3.8) .016 (.4)110 CMR05F111JODR .460 (11.7) .370 ( 9.4) .180 (4.6) .225 (5.7) .025 (.6)120 CMR04F121JODR .380 ( 9.7) .350 ( 8.9) .200 (5.1) .150 (3.8) .016 (.4)120 CMR05F121JODR .460 (11.7) .370 ( 9.4) .180 (4.6) .225 (5.7) .025 (.6)130 CMR04F131JODR .380 ( 9.7) .360 ( 9.1) .200 (5.1) .150 (3.8) .016 (.4)130 CMR05F131JODR .460 (11.7) .370 ( 9.4) .180 (4.6) .225 (5.7) .025 (.6)150 CMR04F151JODR .380 ( 9.7) .360 ( 9.1) .210 (5.3) .150 (3.8) .016 (.4)150 CMR05F151JODR .460 (11.7) .370 ( 9.4) .190 (4.8) .225 (5.7) .025 (.6)160 CMR04F161JODR .380 ( 9.7) .360 ( 9.1) .210 (5.3) .150 (3.8) .016 (.4)160 CMR05F161JODR .460 (11.7) .370 ( 9.4) .190 (4.8) .225 (5.7) .025 (.6)180 CMR04F181JODR .380 ( 9.7) .370 ( 9.4) .210 (5.3) .150 (3.8) .016 (.4)180 CMR05F181JODR .460 (11.7) .370 ( 9.4) .190 (4.8) .225 (5.7) .025 (.6)200 CMR04F201JODR .390 ( 9.9) .380 ( 9.7) .220 (5.6) .150 (3.8) .016 (.4)200 CMR05F201JODR .460 (11.7) .380 ( 9.7) .190 (4.8) .225 (5.7) .025 (.6)220 CMR04F221JODR .390 ( 9.9) .380 ( 9.7) .220 (5.6) .150 (3.8) .016 (.4)220 CMR05F221JODR .460 (11.7) .380 ( 9.7) .200 (5.1) .225 (5.7) .025 (.6)240 CMR04F241JODR .390 ( 9.9) .380 ( 9.7) .220 (5.6) .150 (3.8) .016 (.4)240 CMR05F241JODR .460 (11.7) .380 ( 9.7) .200 (5.1) .225 (5.7) .025 (.6)270 CMR05F271JODR .470 (11.9) .390 ( 9.9) .210 (5.3) .225 (5.7) .025 (.6)300 CMR05F301JODR .470 (11.9) .390 ( 9.9) .210 (5.3) .225 (5.7) .025 (.6)330 CMR05F331JODR .470 (11.9) .390 ( 9.9) .210 (5.3) .225 (5.7) .025 (.6)360 CMR05F361JODR .470 (11.9) .400 (10.2) .220 (5.6) .225 (5.7) .025 (.6)390 CMR05F391JODR .470 (11.9) .400 (10.2) .220 (5.6) .225 (5.7) .025 (.6)430 CMR06F431JODR .640 (16.3) .510 (13.0) .200 (5.1) .350 (8.9) .032 (.8)470 CMR06F471JODR .640 (16.3) .510 (13.0) .200 (5.1) .350 (8.9) .032 (.8)510 CMR06F511JODR .650 (16.5) .510 (13.0) .200 (5.1) .350 (8.9) .032 (.8)560 CMR06F561JODR .650 (16.5) .510 (13.0) .200 (5.1) .350 (8.9) .032 (.8)620 CMR06F621JODR .650 (16.5) .510 (13.0) .200 (5.1) .350 (8.9) .032 (.8)680 CMR06F681JODR .650 (16.5) .510 (13.0) .210 (5.3) .350 (8.9) .032 (.8)750 CMR06F751JODR .650 (16.5) .510 (13.0) .210 (5.3) .350 (8.9) .032 (.8)820 CMR06F821JODR .650 (16.5) .510 (13.0) .210 (5.3) .350 (8.9) .032 (.8)910 CMR06F911JODR .650 (16.5) .510 (13.0) .210 (5.3) .350 (8.9) .032 (.8)

1000 CMR06F102JODR .650 (16.5) .520 (13.2) .220 (5.6) .350 (8.9) .032 (.8)1100 CMR06F112JODR .650 (16.5) .520 (13.2) .220 (5.6) .350 (8.9) .032 (.8)1200 CMR06F122JODR .660 (16.8) .520 (13.2) .220 (5.6) .350 (8.9) .032 (.8)1300 CMR06F132JODR .660 (16.8) .520 (13.2) .220 (5.6) .350 (8.9) .032 (.8)1500 CMR06F152JODR .660 (16.8) .520 (13.2) .230 (5.8) .350 (8.9) .032 (.8)1600 CMR06F162JODR .660 (16.8) .530 (13.5) .230 (5.8) .350 (8.9) .032 (.8)1800 CMR06F182JODR .670 (17.0) .530 (13.5) .240 (6.1) .350 (8.9) .032 (.8)2000 CMR06F202JODR .670 (17.0) .530 (13.5) .240 (6.1) .350 (8.9) .032 (.8)


300 Vdc (cont’d)7 CMR03C7R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)8 CMR03C8R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)9 CMR03C9R0DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)

10 CMR03C100DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)11 CMR03C110DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)12 CMR03C120DOCR .270 ( 6.9) .190 ( 4.8) .110 ( 2.8) .120 ( 3.0) .016 ( .4)15 CMR03C150DOCR .270 ( 6.9) .190 ( 4.8) .120 ( 3.0) .120 ( 3.0) .016 ( .4)18 CMR03C180DOCR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)20 CMR03E200DOCR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)22 CMR03E220DOCR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)24 CMR03E240DOCR .270 ( 6.9) .200 ( 5.1) .120 ( 3.0) .120 ( 3.0) .016 ( .4)27 CMR03E270JOCR .270 ( 6.9) .200 ( 5.1) .130 ( 3.3) .120 ( 3.0) .016 ( .4)30 CMR03E300JOCR .270 ( 6.9) .200 ( 5.1) .130 ( 3.3) .120 ( 3.0) .016 ( .4)33 CMR03E330JOCR .270 ( 6.9) .200 ( 5.1) .130 ( 3.3) .120 ( 3.0) .016 ( .4)36 CMR03E360JOCR .270 ( 6.9) .210 ( 5.3) .130 ( 3.3) .120 ( 3.0) .016 ( .4)39 CMR03E390JOCR .270 ( 6.9) .210 ( 5.3) .130 ( 3.3) .120 ( 3.0) .016 ( .4)43 CMR03E430JOCR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)47 CMR03E470JOCR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)51 CMR03E510JOCR .270 ( 6.9) .210 ( 5.3) .140 ( 3.6) .120 ( 3.0) .016 ( .4)56 CMR03E560JOCR .270 ( 6.9) .220 ( 5.6) .150 ( 3.8) .120 ( 3.0) .016 ( .4)62 CMR03E620JOCR .270 ( 6.9) .220 ( 5.6) .150 ( 3.8) .120 ( 3.0) .016 ( .4)68 CMR03E680JOCR .270 ( 6.9) .220 ( 5.6) .150 ( 3.8) .120 ( 3.0) .016 ( .4)75 CMR03E750JOCR .270 ( 6.9) .230 ( 5.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)82 CMR03E820JOCR .270 ( 6.9) .230 ( 5.8) .160 ( 4.1) .120 ( 3.0) .016 ( .4)91 CMR03F910JOCR .270 ( 6.9) .230 ( 5.8) .170 ( 4.3) .120 ( 3.0) .016 ( .4)

100 CMR03F101JOCR .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)110 CMR03F111JOCR .270 ( 6.9) .240 ( 6.1) .180 ( 4.6) .120 ( 3.0) .016 ( .4)120 CMR03F121JOCR .270 ( 6.9) .250 ( 6.4) .190 ( 4.8) .120 ( 3.0) .016 ( .4)270 CMR04F271JOCR .390 ( 9.9) .380 ( 9.7) .220 ( 5.6) .150 ( 3.8) .016 ( .4)300 CMR04F301JOCR .390 ( 9.9) .380 ( 9.7) .220 ( 5.6) .150 ( 3.8) .016 ( .4)

500 Vdc1 CMR04C1R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)1 CMR05C1R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)1.5 CMR04C1R5DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)1.5 CMR05C1R5DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)2 CMR04C2R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)2 CMR05C2R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)2.5 CMR04C2R5DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)2.5 CMR05C2R5DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)3 CMR04C3R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)3 CMR05C3R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)3.5 CMR04C3R5DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)3.5 CMR05C3R5DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)4 CMR04C4R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)4 CMR05C4R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)4.5 CMR04C4R5DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)4.5 CMR05C4R5DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)5 CMR04C5R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)5 CMR05C5R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)6 CMR04C6R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)6 CMR05C6R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)7 CMR04C7R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)7 CMR05C7R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)8 CMR04C8R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)8 CMR05C8R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)9 CMR04C9R0DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)9 CMR05C9R0DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)

10 CMR04C100DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)10 CMR05C100DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)11 CMR04C110DODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)11 CMR05C110DODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)12 CMR04C120JODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)12 CMR05C120JODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)15 CMR04C150JODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)15 CMR05C150JODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)18 CMR04C180JODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)18 CMR05C180JODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)20 CMR04E200JODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)20 CMR05E200JODR .450 (11.4) .360 ( 9.1) .170 ( 4.3) .225 ( 5.7) .025 ( .6)22 CMR04E220JODR .360 ( 9.1) .330 ( 8.4) .190 ( 4.8) .150 ( 3.8) .016 ( .4)




CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito




500 Vdc (cont’d)2200 CMR06F222JODR .670 (17.0) .530 (13.5) .250 ( 6.4) .350 ( 8.9) .032 ( .8)2400 CMR06F242JODR .670 (17.0) .540 (13.7) .260 ( 6.6) .350 ( 8.9) .032 ( .8)2700 CMR06F272JODR .680 (17.3) .540 (13.7) .270 ( 6.9) .350 ( 8.9) .032 ( .8)3000 CMR06F302JODR .680 (17.3) .550 (14.0) .280 ( 7.1) .350 ( 8.9) .032 ( .8)3300 CMR06F332JODR .680 (17.3) .550 (14.0) .290 ( 7.4) .350 ( 8.9) .032 ( .8)3600 CMR06F362JODR .680 (17.3) .560 (14.2) .300 ( 7.6) .350 ( 8.9) .032 ( .8)3900 CMR06F392JODR .690 (17.5) .560 (14.2) .310 ( 7.9) .350 ( 8.9) .032 ( .8)4300 CMR06F432JODR .690 (17.5) .570 (14.5) .330 ( 8.4) .350 ( 8.9) .032 ( .8)4700 CMR06F472JODR .700 (17.8) .580 (14.7) .350 ( 8.9) .350 ( 8.9) .032 ( .8)5100 CMR07F512JODR .780 (19.8) .860 (21.8) .280 ( 7.1) .425 (10.8) .040 (1.0)5600 CMR07F562JODR .780 (19.8) .870 (22.1) .290 ( 7.4) .425 (10.8) .040 (1.0)6200 CMR07F622JODR .780 (19.8) .870 (22.1) .290 ( 7.4) .425 (10.8) .040 (1.0)6800 CMR07F682JODR .780 (19.8) .870 (22.1) .300 ( 7.6) .425 (10.8) .040 (1.0)7500 CMR07F752JODR .790 (20.1) .880 (22.4) .310 ( 7.9) .425 (10.8) .040 (1.0)8200 CMR07F822JODR .790 (20.1) .880 (22.4) .320 ( 8.1) .425 (10.8) .040 (1.0)9100 CMR07F912JODR .790 (20.1) .880 (22.4) .330 ( 8.4) .425 (10.8) .040 (1.0)

10000 CMR07F103JODR .800 (20.3) .890 (22.6) .340 ( 8.6) .425 (10.8) .040 (1.0)11000 CMR07F113JODR .800 (20.3) .890 (22.6) .350 ( 8.9) .425 (10.8) .040 (1.0)12000 CMR07F123JODR .800 (20.3) .890 (22.6) .360 ( 9.1) .425 (10.8) .040 (1.0)13000 CMR07F133JODR .810 (20.6) .890 (22.6) .370 ( 9.4) .425 (10.8) .040 (1.0)15000 CMR07F153JODR .810 (20.6) .900 (22.9) .390 ( 9.9) .425 (10.8) .040 (1.0)16000 CMR07F163JODR .820 (20.8) .900 (22.9) .410 (10.4) .425 (10.8) .040 (1.0)18000 CMR07F183JODR .820 (20.8) .910 (23.1) .430 (10.9) .425 (10.8) .040 (1.0)


CORNELLDUBILIER


Radial LeadedM

ica CapacitorsType CMR, High-Reliability, Mica Capacitors

Specifications

Capacitance is within tolerancewhen measured at these frequencies:

1–1000 pF @ 1 MHz> 1000 pF @ 1 kHz

Dissipation Factor limits are be-low. Measure dissipation factor at 1MHz when the capacitance is 1 pF to1,000 pF, and at 1 kHz when the ca-pacitance is greater than 1,000 pF. Dis-sipation factor is equal to DF=2πfRC,where f is the test frequency, R is theequivalent series resistance, and C isthe capacitance. For other capacitancevalues, see Figure 1. Capacitance Dissipation Factor 100–1000 pF 0.00075 max at 1 MHz 1100–3300 pF 0.0014 max at 1 kHz 3600–9100 pF 0.0013 max at 1 kHz 10,000 pF 0.0012 max at 1 kHz

Quality Factor (Q) is the re-ciprocal of dissipation factor.

Insulation Resistance for ca-pacitances up to 10,000 pF is greaterthan 100 GΩ at 25°C, greater than 10GΩ at 125°C, and greater than 5 GΩ at150°C. For other capacitance valuesand temperatures, see Figure 2.

Withstanding Voltage is twotimes the rated voltage, and can be ap-plied up to 5 seconds without damage.

Temperature Coefficient andCapacitance Drift: Measure the

capacitors’ capacitance at 25°C, –55°C,25°C, 125°C (or 150°C) and at 25°C af-ter stabilizing at each temperature. Thecapacitance will meet the limits of theCharacteristic table shown in OrderingInformation.

Failure Rate: Type CMR capacitorshave specified failure rate levels rang-ing from 0.01% to 2.0% per 1,000hours. The failure rate level is estab-lished at a 90% confidence level and isreferred to operational life at full-ratedvoltage at maximum-rated tempera-ture.

High-Voltage Stabilization: Wesubject capacitors with Failure LevelsM, P, and R to a burn-in at twice-ratedvoltage, at rated temperature, for aminimum of 48 hours. Capacitors thatshow damage, arcing, breakdown, orlow IR are removed. We reject the lot ifmore than 8% of the capacitors fail.

Solderability: After an 8-hoursteam aging, coat leads with a rosinflux (R) and immerse in molten245°C±5°C 60/40 tin/lead solder. Soldercoverage will be no less than 95%when examined at 10X magnification.

Life Test: Subject the capacitors tomaximum operating temperature(+125°C or +150°C) with 1.5 times ratedvoltage applied for 10,000 hours. Takereadings and make visual observations

every 2,000 hours. There will be novisual damage and the capacitors willmeet the after-test limits on page 3.25.

Resistance to Solvents: Subjectthe capacitors to three cycles of 3-minute immersion in solvent, 10 strokeswith bristle brush and, where appli-cable, 1⁄2 minute in vapor, per MIL-STD-202, Method 215. Repeat the threecycles for three solvent mixtures: Iso-propyl alcohol mixture (Solvent 1),azeotrope mixture (Solvent 3), andwater/propylene-glycol mixture (Sol-vent 4). The marking will not rub off orsmear and there will be no visible dam-age to the capacitor body. Refer to MIL-STD-202 for details.

Resistance to Soldering Heat:Capacitors will meet the requirementsof MIL-STD-202, Method 210 Test Con-dition G. Immerse capacitor leads towithin .250 inches (6.4 mm) of the bodyin molten tin/lead solder (260°C±5°C)for 10±2 seconds. Allow to cool. Capaci-tors will meet the after-test limits onpage 3.25.

Marking of capacitors conforms tomethod I of MIL-STD-1285, and in-cludes the type designation, “JAN,”brand, trademark, source code, datecode, rated voltage, capacitance, ca-pacitance tolerance, and highest ratedtemperature. Small capacitors aremarked with the letter “J.”

Figure 1. DF vs. Capacitance Figure 2. IR vs. Capacitance

100,000

10,000

1,000

100INSU

LATI

ON

RES

ISTA

NCE

(M

EGO

HM

S)

5 10 100 1,000 10,000 62,000

CAPACITANCE (pF)

+25°C

+85°C+125°C

+150°C

DIS

SIPA

TIO

N F

ACTO

R

.10

.01

.001

.00011 10 100 1,000 10,000 100,000

CAPACITANCE (pF)

Maximum dissipation factorat 1 MHz for capacitancevalues of 1,000 pF or less

Maximum dissipation factorat 1 kHz for capacitancevalues greater than 1,000 pF




CORNELLDUBILIER


Radi

al L

eade

dM

ica

Capa

cito


Specifications

Moisture Resistance: Capaci-tors will meet the requirements ofMIL-STD-202, Method 106F as out-lined here and diagrammed on theright. Apply 100 V or the rated volt-age (whichever is less) to half of thecapacitors. Don’t apply voltage tothe other half. Refer to MIL-STD-202 for details.1. Dry capacitors for 24 hours in a

50±2°C oven and then allow tostabilize at room temperature.

2. Subject the capacitors to 20 24-hour continuous cycles withrelative humidity and tempera-ture as shown.

3. 4 to 24 hours after completion ofthe last cycle the capacitors willshow no visual damage and willmeet the after-test limits below.

High-Reliability Mica Capacitors

CMR05 C 100 J P D R

CDE Capacitance Capacitance Temperature Range Voltage Failure RateType 1R0 = 1.0pF Tolerance O=–55°C to +125°C* Y= 50 Vdc L=2.0%/1000 hrs.

361 =1360pF D=±.5 pf P=–55°C to +150°C* A= 100 Vdc M=1.0%/1000 hrs.122 =1200pF F =±1% P= .1%/1000 hrs.

G=±2% R= .01%/1000 hrs.J =±5%

Characteristic

Temp. Coeff. Capacitance Standardppm/°C Drift Cap. Range

C –200 to +200 ±(0.5% +0.1pF) 1 – 18 pFE –20 to +100 ±(0.1% +0.1pF) 20 – 82 pFF –200 to + 70 ±(0.05% +0.1pF) 91 pF and up

* “P” temperature range is available for CMR04, CMR05, CMR06, CMR07, CMR08

L = 2.0%/1000 hrs.M = 1.0%/1000 hrs.P = .1%/1000 hrs.R = .01%/1000 hrs.

Y = 50 VdcA = 100 VdcC = 300 VdcD = 500 Vdc


Order by complete part number, as below. For otheroptions, write your requirements on your quote re-quest.

Test Withstand Insulation Capacitance Change DF QVoltage Resistance (whichever is greater)

Moisture Resistance IL 30 GΩ NV±1% or ±1 pF 150% IL 2/3xILLife Test IL IL NV±1% or ±1 pF 150% IL 2/3xILSolder Heat IL IL IV±5% or ±5pF IL ILIL=Initial Limit NV=Nominal Value IV=Initial Value

After-Test Limits

24-Hour Moisture Resistance Cycle65±2°C

90–98% RH

21⁄2 3 21⁄2hours

21⁄2 3 21⁄2

8

31–4

–10±2°Cuncontrolled

humidity

25±2°C90–98% RH


CORNELLDUBILIER


High-Voltage&

PulseM

ica CapacitorsHigh-Voltage, Rectangular Types, Mica Capacitors

Types 271, 272, 273—Rectangular Case, High-Current and High-Voltage Circuits

Designed for frequencies ranging from 100 kHz

to 3 MHz, Mica Capacitor Types 271, 272, and

273 are well-suited for high-current and high-

voltage circuits like radio transmitters. Cast in

rectangular cases, these capacitors are electrically

equivalent to MIL-C-5 Styles CM65 through

CM73 in capacitance and current ratings but are

far superior in environmental capability,

temperature range, physical size, mounting

configuration, and reliability.

Type 271 Ratings

Performance Highlights• Peak Voltage: 250 to 8,000 Peak Volts• Capacitance Range: 47 pF to 1,000,000 pF• Capacitance Tolerance: ±2 (G), ±5% (J)• Temperature Range: –55°C to +125°C• Cast in Rectangular Cases

• Type 273 permits stand-off mounting• Highly shock resistant• Optional aluminum mounting plates• Convenient mounting

Rated Current AtCap Catalog Frequencies (rms amperes)pF Number 3 MHz 1 MHz .3 MHz .1 MHz

250 Peak Volts47000 27102B473JO0 11 11.0 9.1 4.750000 27102B503JO0 11 11.0 9.1 4.751000 27102B513JO0 11 11.0 9.1 4.756000 27102B563JO0 11 11.0 9.1 4.762000 27102B623JO0 11 11.0 9.1 5.168000 27102B683JO0 11 11.0 9.1 5.175000 27102B753JO0 11 11.0 9.1 5.182000 27102B823JO0 11 11.0 9.1 5.191000 27102B913JO0 11 11.0 9.1 5.6

100000 27102B104JO0 11 11.0 9.1 5.6500 Peak Volts

27000 27105B273JO0 11 11.0 7.5 3.930000 27105B303JO0 11 11.0 8.2 3.933000 27105B333JO0 11 11.0 8.2 4.336000 27105B363JO0 11 11.0 8.2 4.339000 27105B393JO0 11 11.0 8.2 4.343000 27105B433JO0 11 11.0 9.1 4.7

1,000 Peak Volts 10000 27110B103JO0 10 9.1 5.1 2.4 11000 27110B113JO0 11 10.0 5.6 2.7 12000 27110B123JO0 11 10.0 6.2 3.0 13000 27110B133JO0 11 11.0 6.8 3.0 15000 27110B153JO0 11 11.0 6.8 3.3 16000 27110B163JO0 11 11.0 6.8 3.3 18000 27110B183JO0 11 11.0 7.5 3.3 20000 27110B203JO0 11 11.0 7.5 3.622000 27110B223JO0 11 11.0 7.5 3.624000 27110B243JO0 11 11.0 7.5 3.6

1,500 Peak Volts8000 27115B802JO0 10 8.2 4.7 2.28200 27115B822JO0 10 8.2 4.7 2.29100 27115B912JO0 10 8.2 5.1 2.4


2,000 Peak Volts2700 27120B272JO0 6.8 5.1 2.7 1.33000 27120B302JO0 7.5 5.1 3.0 1.33300 27120B332JO0 7.5 5.6 3.0 1.53600 27120B362JO0 7.5 5.6 3.3 1.53900 27120B392JO0 8.2 6.2 3.3 1.64000 27120B402JO0 8.2 6.2 3.3 1.64300 27120B432JO0 8.2 6.2 3.6 1.64700 27120B472JO0 8.2 6.8 3.6 1.85000 27120B502JO0 8.2 6.8 3.6 1.85100 27120B512JO0 8.2 6.8 3.6 1.85600 27120B562JO0 9.1 7.5 3.9 2.06000 27120B602JO0 9.1 7.5 4.3 2.06200 27120B622JO0 9.1 7.5 4.3 2.06800 27120B682JO0 10 7.5 4.3 2.07500 27120B752JO0 10 8.2 4.7 2.2

3,000 Peak Volts47 27130B470JO0 1.2 .51 .15 .05151 27130B510JO0 1.3 .51 .18 .05656 27130B560JO0 1.3 .56 .20 .05662 27130B620JO0 1.5 .62 .22 .06868 27130B680JO0 1.5 .62 .24 .07575 27130B750JO0 1.5 .62 .27 .08282 27130B820JO0 1.6 .68 .27 .08291 27130B910JO0 1.6 .68 .33 .091

100 27130B101JO0 1.8 .75 .33 .10110 27130B111JO0 1.8 .82 .36 .12120 27130B121JO0 2 .91 .39 .15130 27130B131JO0 2 .91 .43 .16150 27130B151JO0 2.2 1.0 .47 .18160 27130B161JO0 2.2 1.1 .51 .20180 27130B181JO0 2.4 1.1 .56 .22200 27130B201JO0 2.4 1.2 .62 .24220 27130B221JO0 2.7 1.3 .62 .27240 27130B241JO0 2.7 1.3 .68 .30




CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

High-Voltage, Rectangular Types, Mica Capacitors

Type 271, 272 and 273 Ratings


5,000 Peak Volts47 27250B470JO0 1.5 .62 .20 .06251 27250B510JO0 1.6 .68 .22 .06256 27250B560JO0 1.8 .75 .27 .06862 27250B620JO0 1.8 .82 .30 .07568 27250B680JO0 2.0 .91 .33 .07575 27250B750JO0 2.0 1.0 .36 .08282 27250B820JO0 2.2 1.1 .39 .09191 27250B910JO0 2.4 1.2 .43 .10

100 27250B101JO0 2.4 1.2 .47 .10110 27250B111JO0 2.7 1.3 .51 .15120 27250B121JO0 2.7 1.5 .56 .18130 27250B131JO0 3.0 1.6 .62 .22150 27250B151JO0 3.3 1.8 .68 .24160 27250B161JO0 3.3 1.8 .75 .27180 27250B181JO0 3.3 2.0 .82 .30200 27250B201JO0 3.6 2.0 .82 .33220 27250B221JO0 3.6 2.2 .91 .39240 27250B241JO0 3.6 2.4 1.0 .43250 27250B251JO0 3.6 2.4 1.0 .43270 27250B271JO0 3.9 2.4 1.1 .47300 27250B301JO0 3.9 2.7 1.1 .51330 27250B331JO0 4.3 2.7 1.2 .51360 27250B361JO0 4.3 2.7 1.3 .56390 27250B391JO0 4.3 2.7 1.3 .62430 27250B431JO0 4.7 3.0 1.5 .68470 27250B471JO0 4.7 3.3 1.5 .68500 27250B501JO0 4.7 3.3 1.6 .75510 27250B511JO0 4.7 3.3 1.6 .75560 27250B561JO0 5.1 3.6 1.8 .82600 27250B601JO0 5.1 3.6 1.8 .82620 27250B621JO0 5.1 3.6 1.8 .82680 27250B681JO0 2.1 3.6 1.8 .82750 27250B751JO0 5.6 3.9 2.2 .91820 27250B821JO0 5.6 3.9 2.4 1.0910 27250B911JO0 5.6 4.3 2.4 1.1

1000 27250B102JO0 6.2 4.3 2.4 1.21100 27250B112JO0 6.2 4.7 2.7 1.21200 27250B122JO0 6.2 4.7 2.7 1.31300 27250B132JO0 6.8 5.1 3.0 1.31500 27250B152JO0 6.8 5.1 3.3 1.51600 27250B162JO0 6.8 5.6 3.6 1.51800 27250B182JO0 7.5 5.6 3.6 1.62000 27250B202JO0 7.5 6.2 3.6 1.82200 27250B222JO0 7.5 6.2 3.9 2.02400 27250B242JO0 8.2 6.2 4.3 2.0

400 Peak Volts1000000 27304B105JO0 18.0 25.0 22.0 12.0

600 Peak Volts200000 27306B204JO0 18.0 25.0 22.0 12.0250000 27306B254JO0 18.0 25.0 22.0 12.0300000 27306B304JO0 18.0 25.0 22.0 12.0400000 27306B404JO0 18.0 25.0 22.0 12.0500000 27306B504JO0 18.0 25.0 22.0 12.0600000 27306B604JO0 18.0 25.0 22.0 12.0750000 27306B754JO0 18.0 25.0 22.0 12.0

2,000 Peak Volts100000 27320B104JO0 18.0 25.0 22.0 12.0

4,000 Peak Volts 25000 27340B253JO0 18.0 24.0 19.0 11.5 30000 27340B303JO0 18.0 24.0 19.0 11.5 40000 27340B403JO0 18.0 24.0 20.0 12.0 50000 27340B503JO0 18.0 25.0 21.0 12.0

5,000 Peak Volts 20000 27350B203JO0 18.0 23.0 18.0 10.5

8,000 Peak Volts200 27380B201JO0 7.5 5.0 1.5 .5250 27380B251JO0 7.5 5.0 1.5 .5500 27380B501JO0 8.5 6.0 3.0 1.0

1000 27380B102JO0 10.0 8.5 4.5 1.52000 27380B202JO0 11.5 11.5 7.5 3.03000 27380B302JO0 12.5 13.5 9.5 4.04000 27380B402JO0 13.5 15.5 10.5 5.04500 27380B452JO0 14.0 16.0 11.5 6.05000 27380B502JO0 14.0 16.0 11.5 6.06000 27380B602JO0 15.0 17.0 12.5 6.58000 27380B802JO0 16.0 19.0 14.0 7.5

10000 27380B103JO0 17.0 20.0 15.0 8.5


3,000 Peak Volts (cont’d)250 27130B251JO0 2.7 1.3 .68 .30270 27130B271JO0 3.1 1.5 .75 .30300 27130B301JO0 3 1.5 .75 .36330 27130B331JO0 3 1.6 .82 .36360 27130B361JO0 3.3 1.6 .91 .39390 27130B391JO0 3.3 1.8 .91 .43430 27130B431JO0 3.6 1.8 1.0 .47470 27130B471JO0 3.6 2.0 1.1 .47500 27130B501JO0 3.6 2.0 1.1 .51510 27130B511JO0 3.6 2.0 1.1 .51560 27130B561JO0 3.9 2.2 1.2 .51620 27130B621JO0 3.9 2.4 1.2 .56680 27130B681JO0 4.3 2.4 1.3 .62750 27130B751JO0 4.3 2.7 1.3 .62820 27130B821JO0 4.3 2.7 1.5 .68910 27130B911JO0 4.7 3.0 1.5 .68

1000 27130B102JO0 4.7 3.0 1.6 .751100 27130B112JO0 5.1 3.3 1.6 .821200 27130B122JO0 5.1 3.3 1.8 .821300 27130B132JO0 5.6 3.6 1.8 .911500 27130B152JO0 5.6 3.9 2.0 .911600 27130B162JO0 5.6 3.9 2.0 1.01800 27130B182JO0 6.2 4.3 2.2 1.12000 27130B202JO0 6.2 4.3 2.4 1.12200 27130B222JO0 6.8 4.7 2.4 1.22400 27130B242JO0 6.8 4.7 2.7 1.2

250 Peak Volts250000 27202B254JO0 15.0 18 15 8.2

500 Peak Volts82000 27205B823JO0 15.0 18 15 8.291000 27205B913JO0 15.0 18 15 8.2

100000 27205B104JO0 15.0 18 15 8.2200000 27205B204JO0 15.0 18 15 8.2

1,000 Peak Volts 56000 27210B563JO0 15.0 16.0 15 8.2 62000 27210B623JO0 15.0 18 15 8.2 68000 27210B683JO0 15.0 18 15 8.2 75000 27210B753JO0 15.0 18 15 8.2

1,500 Peak Volts 24000 27215B243JO0 13.0 15.0 12.0 6.8 27000 27215B273JO0 13.0 15.0 12.0 6.8 30000 27215B303JO0 13.0 15.0 12.0 6.8 33000 27215B333JO0 13.0 15.0 13.0 7.5 36000 27215B363JO0 13.0 16.0 13.0 7.5 39000 27215B393JO0 15.0 16.0 13.0 7.5 43000 27215B433JO0 15.0 16.0 13.0 7.5 47000 27215B473JO0 15.0 16.0 13 7.5 50000 27215B503JO0 15.0 16.0 15 7.5 51000 27215B513JO0 15.0 16.0 15 7.5

2,000 Peak Volts8200 27220B822JO0 10.0 10.0 7.5 3.99100 27220B912JO0 11.0 10.0 8.2 4.3

10000 27220B103JO0 11.0 11.0 8.2 4.3 11000 27220B113JO0 11.0 11.0 8.2 4.7 12000 27220B123JO0 11.0 11.0 9.1 4.7 13000 27220B133JO0 12.0 12.0 9.1 5.1 15000 27220B153JO0 12.0 12.0 10.0 5.1 16000 27220B163JO0 12.0 12.0 10.0 5.6 18000 27220B183JO0 12.0 13.0 10.0 5.6 20000 27220B203JO0 13.0 13.0 11.0 6.222000 27220B223JO0 13.0 13.0 11.0 6.2

3,000 Peak Volts2700 27230B272JO0 8.2 6.8 4.3 2.23000 27230B302JO0 8.2 6.8 4.7 2.23300 27230B332JO0 8.2 6.8 4.7 2.43600 27230B362JO0 8.2 7.5 5.1 2.43900 27230B392JO0 9.1 7.5 5.6 2.74300 27230B432JO0 9.1 7.5 5.6 2.74700 27230B472JO0 9.1 8.2 6.2 35000 27230B502JO0 9.1 8.2 6.2 35100 27230B512JO0 9.1 8.2 6.2 35600 27230B562JO0 9.1 9.1 6.2 3.36000 27230B602JO0 10.0 9.1 6.8 3.66200 27230B622JO0 10.0 9.1 6.8 3.66800 27230B682JO0 10.0 9.1 6.8 3.67500 27230B752JO0 10.0 9.1 6.8 3.9


CORNELLDUBILIER


High-Voltage&

PulseM

ica CapacitorsHigh-Voltage, Cylindrical Types, Mica Capacitors

Types 291, 292, 293, 294—Cylindrical Case, High-Current andHigh-Voltage Circuits

Type 291 Ratings

Designed for frequencies ranging from 100 kHz

to 3 MHz, Mica Capacitor Types 291, 292, 293

and 294 are well suited for high-current and

high-high-voltage circuits like radio transmitters.

Cast in cylindrical cases, these capacitors are

electrically equivalent to MIL-C-5 Styles CM75

through CM93 in capacitance and current ratings

but are far superior in environmental capability,

temperature range, physical size, mounting

configuration, and reliability.

Performance Highlights• Peak Voltage: 1,000 to 30,000 Peak Volts• Capacitance Range: 47 pF to 100,000 pF• Capacitance Tolerance: ±2% (G), ±5% (J)• Temperature Range: –55°C to +125°C

• Cast in Cylindrical Cases• Highly shock resistant• Convenient mounting


1,000 Peak Volts 75000 29110B753JO0 18.0 22.0 22.0 16.0 82000 29110B823JO0 18.0 22.0 22.0 16.0 91000 29110B913JO0 18.0 22.0 22.0 16.0100000 29110B104JO0 18.0 22.0 22.0 18.0

1,500 Peak Volts 30000 29115B303JO0 18.0 22.0 18.0 12.0 33000 29115B333JO0 18.0 22.0 20.0 13.0 36000 29115B363JO0 18.0 22.0 20.0 13.0 39000 29115B393JO0 18.0 22.0 20.0 13.0 43000 29115B433JO0 18.0 22.0 22.0 13.0 47000 29115B473JO0 18.0 22.0 22.0 15.0 51000 29115B513JO0 18.0 22.0 22.0 15.0 56000 29115B563JO0 18.0 22.0 22.0 15.0 62000 29115B623JO0 18.0 22.0 22.0 16.0 68000 29115B683JO0 18.0 22.0 22.0 16.0

2,000 Peak Volts 18000 29120B183JO0 18.0 20.0 16.0 11.0 20000 29120B203JO0 18.0 22.0 18.0 11.0 22000 29120B223JO0 18.0 22.0 18.0 11.0 24000 29120B243JO0 18.0 22.0 18.0 12.0 27000 29120B273JO0 18.0 22.0 18.0 12.0


4,000 Peak Volts5100 29140B512JO0 16.0 16.0 12.0 6.25600 29140B562JO0 16.0 18.0 13.0 6.86000 29140B602JO0 16.0 18.0 13.0 7.56200 29140B622JO0 16.0 18.0 13.0 7.56800 29140B682JO0 16.0 18.0 13.0 7.5


4,000 Peak Volts (cont’d)7500 29140B752JO0 18.0 18.0 13.0 7.58200 29140B822JO0 18.0 20.0 15.0 8.29100 29140B912JO0 18.0 20.0 15.0 8.2

10000 29140B103JO0 18.0 20.0 15.0 9.111000 29140B113JO0 18.0 20.0 15.0 9.1

6,000 Peak Volts47 29160B470JO0 2.0 1.2 .51 .1650 29160B500JO0 2.0 1.3 .56 .1851 29160B510JO0 2.0 1.3 .56 .1856 29160B560JO0 2.2 1.3 .56 .1862 29160B620JO0 2.2 1.5 .62 .2068 29160B680JO0 2.4 1.5 .68 .2275 29160B750JO0 2.4 1.6 .68 .2282 29160B820JO0 2.7 1.8 .75 .2491 29160B910JO0 2.7 1.8 .91 .27

100 29160B101JO0 3.0 2.0 .91 .30110 29160B111JO0 3.0 2.2 1.0 .30120 29160B121JO0 3.3 2.2 1.0 .33130 29160B131JO0 3.3 2.4 1.1 .36150 29160B151JO0 3.6 2.4 1.2 .39160 29160B161JO0 3.9 2.7 1.3 .43180 29160B181JO0 4.3 3.0 1.5 .47200 29160B201JO0 4.3 3.0 1.5 .51220 29160B221JO0 4.7 3.3 1.6 .56240 29160B241JO0 4.7 3.6 1.8 .62270 29160B271JO0 5.1 3.6 2.0 .62300 29160B301JO0 5.1 3.9 2.0 .68330 29160B331JO0 5.6 4.3 2.2 .75360 29160B361JO0 6.2 4.3 2.4 .75390 29160B391JO0 6.2 4.7 2.7 .82400 29160B401JO0 6.2 4.7 2.7 .82430 29160B431JO0 6.8 4.7 2.7 .82470 29160B471JO0 6.8 5.1 3.0 .91500 29160B501JO0 6.8 5.1 3.0 1.0




CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

High-Voltage, Cylindrical Types, Mica Capacitors

Types 291, 292 and 293 Ratings


10,000 Peak Volts47 292100B470JO0 2.7 2.0 .91 .2751 292100B510JO0 2.7 2.0 1.0 .3056 292100B560JO0 3.0 2.2 1.0 .3062 292100B620JO0 3.3 2.2 1.1 .3368 292100B680JO0 3.3 2.4 1.2 .3375 292100B750JO0 3.6 2.4 1.2 .3682 292100B820JO0 3.6 2.7 1.3 .3991 292100B910JO0 3.9 2.7 1.5 .43

100 292100B101JO0 4.3 3.0 1.5 .47110 292100B111JO0 4.3 3.0 1.6 .51120 292100B121JO0 4.7 3.3 1.6 .56130 292100B131JO0 4.7 3.6 1.8 .62150 292100B151JO0 5.1 3.6 1.8 .62160 292100B161JO0 5.1 3.9 2.0 .75180 292100B181JO0 5.6 4.3 2.2 .82200 292100B201JO0 6.2 4.3 2.4 .82220 292100B221JO0 6.2 4.7 2.4 .91240 292100B241JO0 6.8 5.1 2.7 1.0250 292100B251JO0 6.8 5.1 2.7 1.0270 292100B271JO0 6.8 5.1 2.7 1.0300 292100B301JO0 7.5 5.6 3.0 1.1330 292100B331JO0 7.5 5.6 3.0 1.2360 292100B361JO0 8.2 6.2 3.6 1.2390 292100B391JO0 8.2 6.2 3.6 1.3430 292100B431JO0 9.1 6.2 3.6 1.3470 292100B471JO0 9.1 6.8 3.9 1.5500 292100B501JO0 9.1 6.8 3.9 1.6510 292100B511JO0 9.1 6.8 3.9 1.6560 292100B561JO0 10.0 7.5 4.3 1.6620 292100B621JO0 11.0 8.2 4.7 1.8680 292100B681JO0 11.0 8.2 4.7 1.8750 292100B751JO0 11.0 8.2 5.1 2.0820 292100B821JO0 12.0 9.1 5.1 2.2910 292100B911JO0 12.0 9.1 5.6 2.2

1000 292100B102JO0 12.0 10.0 6.2 2.41100 292100B112JO0 13.0 10.0 6.2 2.71200 292100B122JO0 15.0 11.0 6.8 2.71300 292100B132JO0 15.0 11.0 6.8 2.71500 292100B152JO0 15.0 12.0 7.5 3.01600 292100B162JO0 16.0 12.0 7.5 3.31800 292100B182JO0 16.0 13.0 8.2 3.62000 292100B202JO0 16.0 13.0 8.2 3.6


6,000 Peak Volts (cont’d)510 29160B511JO0 6.8 5.1 3.0 1.0560 29160B561JO0 7.5 5.6 3.3 1.1620 29160B621JO0 8.2 6.2 3.6 1.2680 29160B681JO0 8.2 6.2 3.9 1.3750 29160B751JO0 8.2 6.8 3.9 1.5820 29160B821JO0 9.1 6.8 4.3 1.5910 29160B911JO0 9.1 7.5 4.7 1.6

1000 29160B102JO0 10.0 7.5 5.1 1.81100 29160B112JO0 10.0 8.2 5.1 2.01200 29160B122JO0 11.0 8.2 5.6 2.21300 29160B132JO0 11.0 9.1 6.2 2.21500 29160B152JO0 12.0 9.1 6.2 2.41600 29160B162JO0 12.0 10.0 6.8 2.71800 29160B182JO0 13.0 11.0 7.5 3.02000 29160B202JO0 13.0 11.0 7.5 3.32200 29160B222JO0 13.0 12.0 8.2 3.62400 29160B242JO0 15.0 13.0 9.1 3.92700 29160B272JO0 15.0 13.0 9.1 3.93000 29160B302JO0 15.0 13.0 9.1 4.33300 29160B332JO0 15.0 15.0 10.0 4.73600 29160B362JO0 16.0 15.0 11.0 5.13900 29160B392JO0 16.0 15.0 11.0 5.64000 29160B402JO0 16.0 15.0 11.0 5.64300 29160B432JO0 16.0 15.0 11.0 5.64700 29160B472JO0 16.0 16.0 12.0 6.25000 29160B502JO0 16.0 16.0 12.0 6.2

1,500 Peak Volts 75000 29215B753JO0 20.0 39.0 33.0 20.0 82000 29215B823JO0 20.0 39.0 33.0 20.0 91000 29215B913JO0 20.0 39.0 33.0 20.0100000 29215B104JO0 20.0 39.0 36.0 20.0

2,000 Peak Volts 30000 29220B303JO0 20.0 33.0 24.0 15.0 33000 29220B333JO0 20.0 33.0 24.0 15.0 36000 29220B363JO0 20.0 33.0 27.0 16.0 39000 29220B393JO0 20.0 36.0 27.0 16.0 43000 29220B433JO0 20.0 36.0 27.0 16.0 47000 29220B473JO0 20.0 36.0 27.0 18.0 51000 29220B513JO0 20.0 36.0 30.0 18.0 56000 29220B563JO0 20.0 36.0 30.0 18.0 62000 29220B623JO0 20.0 39.0 30.0 18.0 68000 29220B683JO0 20.0 39.0 33.0 20.0

3,000 Peak Volts 18000 29230B183JO0 20.0 30.0 20.0 12.0 20000 29230B203JO0 20.0 30.0 22.0 13.0 22000 29230B223JO0 20.0 30.0 22.0 13.0 24000 29230B243JO0 20.0 33.0 24.0 13.0 27000 29230B273JO0 20.0 33.0 24.0 13.0


5,000 Peak Volts5600 29250B562JO0 20.0 20.0 13.0 6.86000 29250B602JO0 20.0 22.0 15.0 6.86200 29250B622JO0 20.0 22.0 15.0 6.86800 29250B682JO0 20.0 22.0 15.0 7.57500 29250B752JO0 20.0 22.0 15.0 7.58200 29250B822JO0 20.0 24.0 16.0 8.29100 29250B912JO0 20.0 24.0 16.0 8.2

10000 29250B103JO0 20.0 24.0 18.0 9.1 11000 29250B113JO0 20.0 27.0 18.0 9.1

6,000 Peak Volts4700 29260B472JO0 20.0 20.0 13.0 6.25000 29260B502JO0 20.0 20.0 13.0 6.25100 29260B512JO0 20.0 20.0 13.0 6.2

8,000 Peak Volts2200 29280B222JO0 18.0 13.0 9.1 3.92400 29280B242JO0 18.0 15.0 10.0 4.32700 29280B272JO0 18.0 15.0 10.0 4.33000 29280B302JO0 18.0 16.0 10.0 4.73300 29280B332JO0 20.0 16.0 11.0 4.73600 29280B362JO0 20.0 18.0 11.0 5.13900 29280B392JO0 20.0 18.0 12.0 5.64000 29280B402JO0 20.0 18.0 12.0 5.64300 29280B432JO0 20.0 18.0 12.0 5.6

Rated Current AtCap Catalog Frequencies (rms amperes) CasepF Number 3 MHz 1 MHz .3 MHz .1 MHz Height

2,000 Peak Volts75000 29320B753JO0 24.0 51.0 39.0 24.0 2.582000 29320B823JO0 24.0 51.0 39.0 24.0 2.591000 29320B913JO0 24.0 51.0 39.0 24.0 2.75

100000 29320B104JO0 24.0 51.0 39.0 24.0 2.753,000 Peak Volts

27000 29330B273JO0 24.0 51.0 33.0 18.0 2.530000 29330B303JO0 24.0 51.0 33.0 20.0 2.533000 29330B333JO0 24.0 51.0 33.0 20.0 2.536000 29330B363JO0 24.0 51.0 36.0 22.0 2.539000 29330B393JO0 24.0 51.0 36.0 22.0 2.543000 29330B433JO0 24.0 51.0 36.0 22.0 2.547000 29330B473JO0 24.0 51.0 36.0 22.0 2.551000 29330B513JO0 24.0 51.0 36.0 24.0 2.7556000 29330B563JO0 24.0 51.0 36.0 24.0 2.7562000 29330B623JO0 24.0 51.0 39.0 24.0 368000 29330B683JO0 24.0 51.0 39.0 24.0 3

5,000 Peak Volts12000 29350B123JO0 24.0 43.0 27.0 13.0 2.513000 29350B133JO0 24.0 43.0 27.0 13.0 2.515000 29350B153JO0 24.0 43.0 27.0 15.0 2.516000 29350B163JO0 24.0 47.0 30.0 15.0 2.518000 29350B183JO0 24.0 47.0 30.0 16.0 2.7520000 29350B203JO0 24.0 47.0 30.0 18.0 2.7522000 29350B223JO0 24.0 47.0 30.0 18.0 324000 29350B243JO0 24.0 51.0 33.0 18.0 3.25

8,000 Peak Volts9100 29380B912JO0 24.0 39.0 24.0 12.0 3.25

10000 29380B103JO0 24.0 39.0 24.0 12.0 3.25 11000 29380B113JO0 24.0 39.0 27.0 13.0 3.25


CORNELLDUBILIER


High-Voltage&

PulseM

ica CapacitorsHigh-Voltage, Cylindrical Types, Mica Capacitors

Types 293 and 294 Ratings


10,000 Peak Volts4700 293100B472JO0 22.0 27.0 18.0 8.2 2.755000 293100B502JO0 24.0 30.0 18.0 9.1 2.755100 293100B512JO0 24.0 30.0 18.0 9.1 2.755600 293100B562JO0 24.0 33.0 20.0 9.1 36000 293100B602JO0 24.0 33.0 20.0 10.0 36200 293100B622JO0 24.0 33.0 20.0 10.0 36800 293100B682JO0 24.0 33.0 20.0 10.0 37500 293100B752JO0 24.0 36.0 22.0 11.0 3.258000 293100B802JO0 24.0 36.0 22.0 11.0 3.258200 293100B822JO0 24.0 36.0 22.0 11.0 3.25

12,000 Peak Volts2200 293120B222JO0 20.0 20.0 12.0 5.6 2.52400 293120B242JO0 20.0 22.0 13.0 6.2 2.752700 293120B272JO0 20.0 22.0 13.0 6.2 2.753000 293120B302JO0 20.0 24.0 15.0 6.8 33300 293120B332JO0 22.0 24.0 15.0 6.8 33600 293120B362JO0 22.0 24.0 15.0 7.5 33900 293120B392JO0 22.0 27.0 16.0 7.5 34000 293120B402JO0 22.0 27.0 16.0 7.5 3.254300 293120B432JO0 22.0 27.0 16.0 8.2 3.25

15,000 Peak Volts1200 293150B122JO0 16.0 15.0 8.2 4.3 2.51300 293150B132JO0 16.0 15.0 9.1 4.3 2.51500 293150B152JO0 16.0 16.0 9.1 4.7 2.751600 293150B162JO0 18.0 18.0 10.0 4.7 2.751800 293150B182JO0 18.0 18.0 11.0 5.1 32000 293150B202JO0 18.0 20.0 11.0 5.6 3

20,000 Peak Volts47 293200B470JO0 5.1 2.2 .47 .12 2.550 293200B500JO0 5.1 2.4 .51 .15 2.551 293200B510JO0 5.1 2.4 .51 .15 2.556 293200B560JO0 5.6 2.4 .56 .18 2.562 293200B620JO0 5.6 2.7 .68 .20 2.568 293200B680JO0 5.6 2.7 .75 .24 2.575 293200B750JO0 6.2 3.0 .91 .27 2.582 293200B820JO0 6.2 3.0 1.0 .33 2.591 293200B910JO0 6.8 3.3 1.1 .39 2.5

100 293200B101JO0 6.8 3.6 1.3 .47 2.5110 293200B111JO0 7.5 3.9 1.5 .51 2.5120 293200B121JO0 7.5 4.3 1.6 .62 2.5130 293200B131JO0 7.5 4.3 1.8 .68 2.5150 293200B151JO0 8.2 4.7 2.0 .82 2.5160 293200B161JO0 8.2 5.1 2.2 .91 2.5180 293200B181JO0 9.1 5.1 2.4 1.0 2.5200 293200B201JO0 9.1 5.6 2.7 1.1 2.5220 293200B221JO0 9.1 6.2 3.0 1.2 2.5240 293200B241JO0 10.0 6.2 3.6 1.3 2.5250 293200B251JO0 10.0 6.2 6.8 1.3 2.5270 293200B271JO0 10.0 6.8 3.6 1.5 2.5300 293200B301JO0 10.0 6.8 3.9 1.6 2.5330 293200B331JO0 11.0 7.5 3.9 1.6 2.5360 293200B361JO0 11.0 7.5 3.9 1.8 2.5390 293200B391JO0 11.0 8.2 4.3 2.0 2.5430 293200B431JO0 12.0 8.2 4.7 2.2 2.5470 293200B471JO0 12.0 9.1 4.7 2.2 2.5500 293200B501JO0 12.0 9.1 5.1 2.4 2.5510 293200B511JO0 12.0 9.1 5.1 2.4 2.5560 293200B561JO0 13.0 10.0 5.6 2.7 2.5620 293200B621JO0 13.0 11.0 6.2 2.7 2.5680 293200B681JO0 13.0 11.0 6.2 2.7 2.75750 293200B751JO0 13.0 12.0 6.8 3.0 2.75800 293200B801JO0 15.0 12.0 6.8 3.3 2.75820 293200B821JO0 15.0 12.0 6.8 3.3 2.75910 293200B911JO0 15.0 13.0 7.5 3.6 2.75

1000 293200B102JO0 15.0 13.0 7.5 3.6 2.751100 293200B112JO0 16.0 15.0 8.2 3.9 2.75

3,000 Peak Volts 82000 29430B823JO0 30.0 62.0 43.0 39.0 5 91000 29430B913JO0 30.0 62.0 43.0 39.0 5100000 29430B104JO0 30.0 62.0 43.0 39.0 5

4,000 Peak Volts 68000 29440B683JO0 30.0 56.0 39.0 36.0 5 75000 29440B753JO0 30.0 62.0 43.0 36.0 5

5,000 Peak Volts 33000 29450B333JO0 30.0 56.0 39.0 27.0 4.5 36000 29450B363JO0 30.0 56.0 39.0 30.0 4.5 39000 29450B393JO0 30.0 56.0 39.0 30.0 5


5,000 Peak Volts (cont’d)40000 29450B403JO0 30.0 56.0 39.0 30.0 5

43000 29450B433JO0 30.0 56.0 39.0 30.0 5 47000 29450B473JO0 30.0 56.0 39.0 30.0 5 51000 29450B513JO0 30.0 56.0 39.0 33.0 5 56000 29450B563JO0 30.0 56.0 39.0 33.0 5 62000 29450B623JO0 30.0 56.0 39.0 33.0 5

6,000 Peak Volts 18000 29460B183JO0 30.0 51.0 36.0 22.0 4 20000 29460B203JO0 30.0 51.0 36.0 24.0 4 22000 29460B223JO0 30.0 51.0 36.0 24.0 4 24000 29460B243JO0 30.0 56.0 39.0 27.0 4.5 27000 29460B273JO0 30.0 56.0 39.0 27.0 4.5 30000 29460B303JO0 30.0 56.0 39.0 27.0 5

8,000 Peak Volts 12000 29480B123JO0 30.0 43.0 30.0 20.0 4.5 13000 29480B133JO0 30.0 47.0 30.0 20.0 4.5 15000 29480B153JO0 30.0 47.0 33.0 20.0 5 16000 29480B163JO0 30.0 47.0 33.0 22.0 5

10,000 Peak Volts 10000 294100B103JO0 30.0 43.0 30.0 18.0 511000 294100B113JO0 30.0 43.0 30.0 18.0 5

12,000 Peak Volts8000 294120B802JO0 30.0 39.0 27.0 16.0 58200 294120B822JO0 30.0 39.0 27.0 16.0 59100 294120B912JO0 30.0 39.0 27.0 16.0 5

15,000 Peak Volts4300 294150B432JO0 27.0 30.0 20.0 11.0 4.54700 294150B472JO0 27.0 30.0 22.0 12.0 4.55000 294150B502JO0 27.0 33.0 22.0 12.0 4.55100 294150B512JO0 27.0 33.0 22.0 12.0 4.55600 294150B562JO0 27.0 36.0 22.0 13.0 56000 294150B602JO0 27.0 36.0 24.0 15.0 56200 294150B622JO0 27.0 36.0 24.0 15.0 56800 294150B682JO0 27.0 36.0 24.0 15.0 57500 294150B752JO0 30.0 36.0 27.0 16.0 5

20,000 Peak Volts2000 294200B202JO0 22.0 22.0 15.0 7.5 4.52200 294200B222JO0 22.0 24.0 15.0 8.2 4.52400 294200B242JO0 22.0 24.0 16.0 8.2 4.52700 294200B272JO0 22.0 24.0 16.0 9.1 53000 294200B302JO0 24.0 27.0 18.0 9.1 53300 294200B332JO0 24.0 27.0 18.0 10.0 53600 294200B362JO0 24.0 27.0 18.0 10.0 53900 294200B392JO0 24.0 30.0 20.0 11.0 54000 294200B402JO0 24.0 30.0 20.0 11.0 5

25,000 Peak Volts1100 294250B112JO0 18.0 18.0 11.0 5.6 4.51200 294250B122JO0 18.0 18.0 11.0 5.6 4.51300 294250B132JO0 18.0 18.0 12.0 6.2 4.51500 294250B152JO0 20.0 20.0 12.0 6.2 51600 294250B162JO0 20.0 20.0 13.0 6.8 51800 294250B182JO0 20.0 22.0 13.0 7.5 5

30,000 Peak Volts100 294300B101JO0 7.5 5.1 2.0 .68 4110 294300B111JO0 8.2 5.1 2.2 .82 4120 294300B121JO0 8.2 5.6 2.4 1.0 4130 294300B131JO0 9.1 6.2 2.7 1.1 4150 294300B151JO0 9.1 6.2 3.0 1.3 4160 294300B161JO0 9.1 6.8 3.3 1.5 4180 294300B181JO0 10.0 6.8 3.6 1.6 4200 294300B201JO0 10.0 7.5 3.9 1.8 4220 294300B221JO0 11.0 7.5 3.9 2.0 4240 294300B241JO0 11.0 8.2 4.3 2.0 4250 294300B251JO0 11.0 8.2 4.3 2.0 4270 294300B271JO0 11.0 9.1 4.7 2.2 4300 294300B301JO0 12.0 9.1 5.1 2.4 4330 294300B331JO0 12.0 9.1 5.1 2.4 4360 294300B361JO0 12.0 10.0 5.6 2.7 4390 294300B391JO0 13.0 11.0 6.2 3.0 4430 294300B431JO0 13.0 11.0 6.2 3.0 4470 294300B471JO0 13.0 11.0 6.8 3.3 4500 294300B501JO0 13.0 12.0 6.8 3.3 4510 294300B511JO0 13.0 12.0 6.8 3.3 4560 294300B561JO0 15.0 13.0 7.5 3.6 4620 294300B621JO0 15.0 13.0 8.2 3.9 4680 294300B681JO0 15.0 13.0 8.2 4.3 4.5750 294300B751JO0 16.0 15.0 8.2 4.3 4.5800 294300B801JO0 16.0 15.0 9.1 4.7 4.5820 294300B821JO0 16.0 15.0 9.1 4.7 4.5910 294300B911JO0 16.0 15.0 10.0 5.1 4.5

1000 294300B102JO0 18.0 16.0 10.0 5.1 4.5




CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

High-Voltage Types, Specifications, Mica Capacitors

Type 271 Type 273

Type 272

Type 292Type 291

Type 293 Type 294

MOUNTING STYLE 0 MOUNTING STYLE 1 MOUNTING STYLE 2TOLERANCES UNLESSOTHERWISE SPECIFIED: ±.031

MOUNTING STYLE 0 MOUNTING STYLE 1 MOUNTING STYLE 2

MOUNTING STYLE 0 MOUNTING STYLE 1 MOUNTING STYLE 2 MOUNTING STYLE 0 MOUNTING STYLE 1 MOUNTING STYLE 2

MOUNTING STYLE 0 MOUNTING STYLE 1 MOUNTING STYLE 2 MOUNTING STYLE 0 MOUNTING STYLE 1 MOUNTING STYLE 2

Cast-Case Styles


CORNELLDUBILIER


High-Voltage&

PulseM

ica Capacitors

Type 271 (CM 66) Type 272 (CM 71)

Type 273 Type 291 (CM 76)

Type 292 (CM 81) Type 293 (CM 86)

Type 294 (CM 91) Type G5 (CM 95)

High-Voltage Types, Specifications, Mica Capacitors




CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

High-Voltage Types, Specificaations, Mica Capacitors

Type G1 (available in same ratings as 291)Type G2 (available in same ratings as 292)Type G3 (available in same ratings as 293)Type G4 (available in same ratings as 294)

Type G5 (ratings from 50 pF, 35,000 Vpk to 10,000 pF,15,000 Vpk)

Type L H T t h W d(min.) D S ThreadF1 2.813 1.969 .938 .25 1.469 2.031 .150 2.375 1.5 8-32 NC-2AF2 3.109 2.25 1.25 .375 1.75 2.281 .187 2.625 1.625 10-32 NF-2AF3 4.031 3.938 2.438 .375 2.938 3.063 .266 3.562 1.438 1/4-28 NF-2AG1 3.813 2.5 2.813 .25 .266 3.25G2 5 3 3.5 .25 .266 4.25G3 6.5 4 5 .375 .375 5.75G4 6.5 5.75 5 .375 .375 5.75G5 9 10 6.75 .5 .406

Potted-Case StylesType F1 (available in same ratings as 271)Type F2 (available in same ratings as 272)

Type F3 (available in same ratings as 273)

d –2 HOLES

T ± 1⁄64

W ± 1⁄32

D ± .005

L ± 1⁄32

S ± 1⁄64

THREAD

t ± 1⁄32

h ± 1⁄32

H ± 1⁄16

KCAMPS

VOLTSMFD

DIA –3 HOLES

17⁄64 ± 1⁄64

41⁄32 ± 1⁄32

1.625± .005

3.562 ± .005

27⁄16 ± 1⁄64

5⁄16 ± 1⁄32

31⁄16 ± 1⁄32

17⁄16 ± 1⁄64

5⁄16 ± 1⁄32

315⁄16 MAX

215⁄16 ± 1⁄32

3⁄8 ± 1⁄32

1⁄4-28 NF-2A THREAD

D ± 1⁄64

T ± 1⁄16

L ± 1⁄16

H ± 1⁄16

t ± 1⁄32

d DIA

13⁄32 ± 1⁄64 DIANAMEPLATE

4 ± 1⁄64 R

1 ± 1⁄64

33⁄8 ± 1⁄16 R

1⁄2 ± 1⁄32

10 ± 1⁄16

+ 1⁄64–.00


CORNELLDUBILIER


High-Voltage&

PulseM

ica CapacitorsHigh-Voltage Types, Specifications, Mica Capacitors

SpecificationsCapacitance is within tolerancewhen measured at these frequen-cies:

1–1000 pF @ 1 MHz> 1000 pF @ 1 kHz

Dissipation Factor is typicallyless than 0.05% when measured asabove. Dissipation factor (DF)equals 2πfRC, where f is the test fre-quency, R is the equivalent seriesresistance (Ω), and C is nominal ca-pacitance (F). Q is the reciprocal ofthe dissipation factor.

Operating TemperatureRange is –55°C to +125°C.

Insulation Resistance is noless than 7500 MΩ when measuredat 100 Vdc.

Temperature Coefficientand Capacitance Drift: Mea-sure the capacitors’ capacitance at25°C, 55°C, 25°C, 125°C, and at25°C after stabilizing at each tem-perature. The capacitance will meetthe limits of the Characteristic tableshown in Ordering Information.

Rated Peak Voltage is not tobe exceeded in actual use. Voltageratings are in the listings and applyunder the following conditions:

Temperature: Within the speci-fied operating temperaturerange.

Altitude: Up to 50,000 feet or 3.4inches of mercury.

Relative Humidity: Up to 80%.Frequency: As specified.

Where pulse conditions are encoun-tered, contact us.

Withstanding Voltage: Ca-pacitors will withstand applicationof an ac potential between termi-nals having an rms value equal tothe rated peak voltage at a fre-quency of 100 Hz or less withoutdamage, arcing or breakdown. Ap-ply the potential by raising the volt-age from zero to the specified value.Apply the full potential for a mini-mum of 5 seconds.

Case Insulation: Capacitorcases will withstand, without dam-age, arcing or breakdown, a 60-Hzpeak ac potential equal to twice therated peak voltage applied betweenthe terminals connected togetherand a metal electrode touching thecase. Apply this potential for be-tween 1 and 5 seconds.

Current Ratings at various fre-quencies are in the listings and ap-ply under the following conditions:

Temperature: 65°C maximumDerating Factor: None

Vibration: Capacitors will with-stand vibrational forces occurringat rates of from 10 to 55 Hz for 41⁄2hours. The total excursion duringvibration is 0.06 inches. At the endof this period, make the followinginspections and tests:Visual and Mechanical Inspec-tion: No perceptible deterioration.Withstanding Voltage: As speci-fied under Withstanding Voltage.Insulation Resistance: No lessthan 7500 MΩ.Capacitance Change: Not to ex-ceed 3% of the nominal value orone picofarad, whichever is greater.

Temperature and Immer-sion Cycling: Capacitors willwithstand the temperature and im-mersion cycles indicated in thetables below. Follow three tempera-ture cycles by two immersion cycles.Make the measurements listed be-low no more than 30 minutes fol-lowing the final immersion cycle:Withstanding Voltage: As speci-fied under Withstanding Voltage.Insulation Resistance: No lessthan 7500 MΩ.Capacitance: Change not to ex-ceed 4% of the nominal value orone picofarad, whichever is greater.

Temperature Cycling TestConditions

Steps Temp. Interval(°C) (Minutes)

1 –55 + 0 30 –3

2 25 +10 10 to 15–5

3 125 + 3 30–0

4 25 +10 10 to 15–5

Immersion Test Conditions• Number of cycles: 2• Duration of each immersion: 15

minutes• Immersion bath: Saturated solu-

tion of sodium chloride and wa-ter

• Temp. of hot bath: 65• Temp. of cold bath: 25

Life Test: Subject all capacitors toa temperature of 55°C for 48 hours.Then subject units cast in rectan-gular cases (Types 271, 272, and273) to a 60-Hz rms voltage equalto the rated peak voltage for 250hours. Subject units cast in cylindri-cal cases (Types 291, 292, 293, and294) to a 60-Hz rms voltage equalto 90% of the rated peak voltage for250 hours. In both tests, maintainthe temperature at 125°C. After test,the capacitors will meet these re-quirements:Withstanding Voltage: As speci-fied under Withstanding Voltage.Insulation Resistance: No lessthan 7500 MΩ.Capacitance Change: Within thelimits given in the table below orone picofarad, whichever is greater.

Characteristic Maximum Cap.Change

B ±8%C ±3%D ±3%E ±3%

In addition, the capacitor mustshow no visual damage and themarkings must be legible.

+5–0

+10–5




CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

High-Voltage Types, Ordering Information, Mica Capacitors

271 30 B 470 J O 0

CDE Rated Peak Capacitance Capacitance Temperature Range Mounting StyleType Voltage (in 470=47pF Tolerance 0=–55°C to +125°C 0=No mounting plate

hundreds of 361=360pF G=±2% 1=Mounting plate onlpeak working 122=1200pF J=±5% 1=bottom only

volts) 2=Mounting plates on2=top and bottom

CharacteristicTemp. Coeff. Capacitance Standard

ppm/°C Drift Cap. Range

B Not specified Not specifiedC –200 to +200 ±(0.5% +0.1pF) 1–18 pFD –100 to +100 ±(0.3% +0.1pF)E – 20 to +100 ±(0.1% +0.1pF) 20–82 pF

F1 30 B 470 J M

CDE Rated Peak Characteristic Capacitance Capacitance Temperature RangeType Voltage (in 470=47pF Tolerance M=–55°C to +70°C

hundreds of peak 361=360pF G=±2%working volts) 122=1200pF J=±5%

(standard)

470 = 1247 pF361 = 1360 pF122 = 1200 pF

G= ±2%J = ±5%


Order by complete part number, as below. For other options,write your requirements on your quote request or purchase order.

Cast-Case Transmitting Mica Capacitors

Potted-Case StylesTransmitting mica capacitors are available in potted-case packages with the same ratings as the 27 and 29cast-case series. To order potted styles, use the table atthe right to find the equivalent cast type. Then use thepart numbering below. Type G5, which has no castequivalent, covers ratings of 50 pF at 35,000 Vpk to10,000 pF at 15,000 Vpk. To order, contact us.

Potted Case Type Equivalent Cast TypeF1 271F2 272F3 273G1 291G2 292G3 293G4 294G5 ——

Military Style Numbers

For the commercial equivalent to military style num-bers CM65 through CM95, see the table below.

Military Style No. Equivalent CDE TypeCM65 F1CM66 271, Mounting Style 0CM67 271, Mounting Style 1CM68 271, Mounting Style 2CM70 F2CM71 272, Mounting Style 0CM72 272, Mounting Style 1CM73 272, Mounting Style 2CM75 G1CM76 291, Mounting Style 0CM77 291, Mounting Style 1CM78 291, Mounting Style 2CM80 G2

Military Style No. Equivalent CDE TypeCM81 292, Mounting Style 0CM82 292, Mounting Style 1CM83 292, Mounting Style 2CM85 G3CM86 293, Mounting Style 0CM87 293, Mounting Style 1CM88 293, Mounting Style 2CM90 G4CM91 294, Mounting Style 0CM92 294, Mounting Style 1CM93 294, Mounting Style 2CM95 G5

G= ±2%J = ±5%

470 = 1247 pF361 = 1360 pF122 = 1200 pF

4.035

CORNELLDUBILIER


High-Voltage&

PulseM

ica CapacitorsType KVx, High-Voltage and Pulse, Mica-Paper/Polymer Capacitors

• HV Power Supplies • Satellites• AC Voltage Dividers • Snubbers• Pulse-forming Networks • EFI Devices• Down-hole Applications • X-Ray Equipment• Jet Engine Ignition• Aircraft and Shipboards• Filters and Multipliers

Applications

Performance Highlights• Capacitance Range: 1pF to 10 µF• Tolerance: ±0.5% to ±20%• Voltage Range: 100 V to 150 kVdc• Temperature Range: -55°C to 125°C standard,

-65°C to 200°C available.• Negligible capacitance change, all environments• Insulation Resistance: 5 GΩµF min at 500 Vdc, 2 min.• Dissipation Factor: Characteristic S-.5%, C-.05%

KVx High-Voltage and Pulse Capacitors Ignite Your WorldVoltage, Current and Temperature to New Heights

KaBOOM! Another exploding foil initiator successfullydetonates a military smart bomb thanks to a KVx capaci-tor. Jet engines roar with KVx ignition capacitors. KVx willignite your applications with its high reliability, highenergy density, high peak current capability, and excel-lent mechanical properties.Spanning voltages up to 150kV, peak currents up to100kA, and temperatures from -65°C to +200°C, Type KVx

capacitors are it for applications like pulse ignition,corona-free signal coupling, high-voltage energy storageand voltage division of high AC voltages.

Wide Selection of Capabilities

The Type KVx capacitor draws on an unprecendentedselection of three dielectric systems, three impregnatingsystems, and three package types to deliver its superiorcapabilities.The dielectric is high-purity mica plates, flexible reconsti-tuted mica paper, or a polymer film/mica paper combi-nation. Mica is the proven reliable dielectric for highvoltage and temperature stress, even with continuouscorona and radiation. We combine mica synergisticallywith polymer films to provide pulse capacitors of ex-tremely high energy density (to over .1 J/cc).High value with three impregnation systems: Epoxy—forbest value operation through 125°C; Polyester Resin—for continuous operation up to 200°C.

Five Package Types Deliver Custom FitPackage Type B: Bare sections-if you want to designyour own package.Package Type C: Metal Can-to be worked out individually.Package Type T: For minimum size and quick avail-ability, the Type T package wraps the rectangular capaci-tor element with high temperature, heat-cured polyestertape and closes each end with a thick poured section ofepoxy. The finished capacitor is sealed and is suitable forpotted-in and many low humidity applications.Package Type G: In applications requiring superiormechanical integrity, such as metal clamp mounting,moisture exposure, and mechanical vibration and shock,the Type G package adds that needed strength byvacuum potting the capacitor element in a laminatedfiberglass epoxy tube.

Package Type M: For the ultimate in environmentalprotection and operation up to 150kV, the Type M packageprovides a fully molded, vacuum-encapsulated system. Thefinal capacitor shape can exactly meet your applicationmechanical requirements and fit where no other can.

Operating Life Guaranteed for 10 YearsKVx capacitors are not ordinary high voltage capacitors.Manufacturing processes developed and proven over 50years of continuous manufacture of transmitting, pulseand high-voltage capacitors allow us to make a remark-able guarantee. Cornell Dubilier guarantees that KVx

capacitors will operate ten years or more when operatedwithin specified limits. Cornell Dubilier warrants that if aKVx capacitor fails during normal use within 10 years ofthe date of purchase, it will replace the capacitor at nocharge if CDE analysis confirms that the capacitor wasnot abused by operating beyond product limits forhumidity, temperature, voltage, and current.





CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

Type KVx, High-Voltage and Pulse, Mica-Paper/Polymer Capacitors

Ratings

Outline Drawings

Case DimensionsInches

Cap. Catalog Length Width Height Max. Max.µF Number LMAX WMAX HMAX PRF IPEAK

Case DimensionsInches

Cap. Catalog Length Width Height Max. Max.µF Number LMAX WMAX HMAX PRF IPEAK

1 kVdc (500 V repetitive)0.047 KVX01S473K0T 1.81 1.02 0.14 14000 400.10 KVX01S104K0T 1.81 1.47 0.17 9500 500.22 KVX01S224K0T 2.06 1.74 0.24 6000 600.47 KVX01S474K0T 3.06 1.98 0.24 4500 1000.68 KVX01S105K0T 3.56 2.04 0.27 3800 1501.0 KVX01S105K0T 3.81 2.19 0.35 3100 3002.2 KVX01S225K0T 4.56 3.04 0.41 2300 7003.3 KVX01S335K0T 4.56 3.29 0.55 1700 10004.7 KVX01S475K0T 4.56 3.09 0.84 1300 15006.8 KVX01S685K0T 3.06 3.07 1.93 900 2000

2 kVdc (1 kV repetitive)0.033 KVX02S333K0T 1.56 1.07 0.18 4800 700.68 KVX02S105K0T 3.56 1.96 0.40 1000 2001.0 KVX02S105K0T 3.81 2.41 0.47 900 5003.3 KVX02S335K0T 4.56 2.79 0.91 430 10004.7 KVX02S475K0T 3.56 2.37 2.06 320 1500

3 kVdc (1.5 kV repetitive)0.010 KVX03S103K0T 1.31 1.10 0.19 6200 1300.022 KVX03S223K0T 1.56 1.24 0.20 3700 1500.33 KVX03S334K0T 3.81 2.24 0.34 1000 2000.47 KVX03S474K0T 3.56 2.41 0.50 800 3001.0 KVX03S105K0T 3.56 2.08 1.15 450 6003.3 KVX03S335K0T 3.81 2.80 2.25 250 1500

4 kVdc (2 kV repetitive)0.0068 KVX04S682K0T 1.56 1.32 0.15 6700 600.010 KVX04S103K0T 1.81 1.32 0.15 5300 700.10 KVX04S104K0T 3.06 2.00 0.26 1400 7000.22 KVX04S224K0T 4.06 2.47 0.30 1000 8001.0 KVX04S105K0T 3.81 2.85 1.04 330 10002.2 KVX04S225K0T 3.81 2.81 2.32 220 1500

5 kVdc (2.5 kV repetitive)0.0047 KVX05S472K0T 1.81 1.24 0.14 6700 600.010 KVX05S103K0T 2.06 1.26 0.17 3700 1000.068 KVX05S683K0T 3.56 1.82 0.25 1400 5000.10 KVX05S104K0T 2.06 1.78 0.65 720 11001.0 KVX05S105K0T 4.56 2.84 1.27 260 2000

6 kVdc (3 kV repetitive)0.010 KVX06S103K0T 2.06 1.30 0.19 2700 1200.022 KVX06S223K0T 2.06 1.60 0.25 1600 1400.10 KVX06S104K0T 3.06 2.22 0.38 720 10001.0 KVX06S105K0T 4.56 2.94 1.57 210 2000



12 kVdc (6 kV repetitive)0.010 KVX12S103K0T 4.06 1.89 0.20 1800 3000.033 KVX12S333K0T 4.56 2.82 0.27 920 6000.33 KVX12S334K0T 4.56 3.63 1.93 200 1100

15 kVdc (7.5 kV repetitive)0.00047 KVX15S471K0T 2.06 1.81 0.14 12000 300.00068 KVX15S681K0T 2.06 1.25 0.17 6000 400.0010 KVX15S102K0T 3.06 1.64 0.15 7500 500.010 KVX15S103K0T 4.31 2.10 0.26 1400 3000.22 KVX15S224K0T 4.56 3.76 2.15 210 2000


25 kVdc (12.5 kV repetitive)0.00010 KVX25S101K0T 2.06 1.16 0.17 14000 200.00022 KVX25S221K0T 2.06 1.23 0.25 7200 300.0047 KVX25S471K0T 3.06 1.24 0.27 5000 500.0010 KVX25S102K0T 3.06 2.29 0.20 3800 1200.0022 KVX25S222K0T 3.06 1.59 0.45 1500 3000.0033 KVX25S332K0T 3.06 2.02 0.49 1200 3500.0047 KVX25S472K0T 3.06 2.45 0.53 1000 6000.010 KVX25S103K0T 4.06 2.35 0.55 610 10000.033 KVX25S333K0T 4.56 2.49 1.29 290 2000



CORNELLDUBILIER


High-Voltage&

PulseM

ica CapacitorsType KVx, High-Voltage and Pulse, Mica-Paper/Polymer Capacitors

Specifications

Terminations available differ according topackage type:

Package Type T G MRibbon leads X X XWire leads X X XThreaded studs X X XThreaded inserts X XTurret terminals X XHV Connectors X X Quick Connect

Ribbon leads are typically tin-plated copper,0.005”x0.5”x2” on small units (<1 in3) and0.020”x0.987”x2” on larger.

Wire leads are typically bare AWG #18 or#20, 2” minimum.

Threaded studs or inserts are standard from4-40 to 1⁄4-20 and typically tin-plated brass.

Turret terminals are brass with silver or tinplate.

High voltage connectors are available withcreepage, tracking and clearance distances tomeet requirements up to 150 kV.

ID Marking includes manufacturer, CDM,capacitance in µF, rated voltage, identificationnumber and date code YYWW (2 digit year andweek of manufacture).

Capacitance is within tolerance when mea-sured at 1 kHz (1 MHz if C<1000 pF). Standardtolerance:

±5%≥10 kV±10%≥100 pF & 5 kV±20%<100 pF & 5 kV

Dissipation Factor is no more than 0.5%, Scharacteristic, when measured at 1 kHz (1 MHz ifC<1000 pF) and room temperature. Lower dissi-pation factor specification is available, to 0.1%for mica-plate capacitors, characteristic C.

Insulation Resistance is no less than thelesser of 100 GΩ and 5 GΩµF, when measuredat 500 Vdc after 2 minutes, and at room tem-perature (1 GΩ or 25 MΩµF at 125°C).

Rated Voltage is the maximum peak voltagefor actual use.

Withstanding Voltage: Apply a DC testvoltage for 5 seconds with the charge anddischarge current limited to one ampere andwith the capacitor immersed in an insulatingfluid when needed to prevent external arcing.

Look up the test voltage as a multiple of theRated Voltage in this table:

Rated Voltage Test Voltage0 to 8 kV 200%8.1 to 10 kV 175%10.1 to 12 kV 150%12.1 to 20 kV 140%20.1 to 30 kV 130%30.1 kV and up 120%

Corona-Free capacitors are readily availableand certification for corona-free operation upto 50 kVac or kVdc is available.

Life Test: Subject capacitors to rated maxi-mum temperature ±3°C with rated voltageapplied for 2000(+72,-2)hours. There will be novisual damage and the capacitance will nothave changed more than the greater of ±3%and ±1 pF.

Vibration Resistance: Subject the capaci-tors to simple harmonic motion with an ampli-tude of 0.06 inches; vary the frequency uni-formly from 10 to 55 Hz and return to 10 Hz, allin one minute. Repeat that cycle continuouslyfor 2 hours in each of 3 mutually perpendiculardirections. There will be no visual damage, thecapacitance will not change more than thegreater of ±3% and ±1 pF, and the insulationresistance will be no less than the lesser of 7.5GΩ and 5 GΩµF.

Moisture Resistance: Subject G or M pack-age capacitors to 40±2°C at 90 to 95% humid-ity for 500(+24,-0)hours. Return to room ambi-ent for 24 hours. There will be no visual dam-age, the capacitance will not change morethan the greater of ±4% or 1 pF, and theinsulation resis-tance will be no lessthan the lesser of7.5 GΩ and 5GΩµF.

Moisture resis-tance is not speci-fied for T packagecapacitors andproduct warrantyis void if used regu-larly beyond 50%relative humidity.

TemperatureCoefficient andDrift: Measure the

capacitor’s capacitance at 25°C, -55°C, 25°C,125°C, and at 25°C…all ±3°C…after stabilizingat each temperature. The capacitance tem-perature coefficient will be less than or equal to±500 ppm/°C, and the capacitance will nothave changed more than ±(0.5%+0.1 pF).

Pulse Capability: Maximum achievable peakcurrent is usually limited by the inductance ofthe discharge circuit, not by rise-time effects ofthe dielectric.

For repetition-rated applications, use doublethe dc rating in the Typical Ratings table onthe following page. In other words, for a 10kVrepetition-rated capacitor applicaiton, use a20 kVdc rated capacitor.

The table of Typical Ratings on the follow-ing page lists maximum pulse repetition fre-quency (PRF) and maximum peak current(IPEAK) at the maximum PRF at room tempera-ture ambient conditions. To use higher peakcurrent, derate the PRF as the square of thepeak current ratio. For example, to use doublethe maximum rated peak current, use one-quarter of the maximum rated repetition rate.

For higher rep rate applications, or to enablehigher peak current without the above derat-ing, contact us for alternatives. Also we canrecommend active cooling strategies for yourhigh energy density application.

Capacitor Size is determined by your choiceof package, the capacitance and the ratedvoltage. For new designs, we will furnish yourcapacitor’s size with our quotation. For a firstestimate of capacitor size refer to the TypicalRatings table page 46.




CORNELLDUBILIER


High

-Vol

tage

& P

ulse

Mic

a Ca

paci

tors

Type KVx, High-Voltage and Pulse, Mica-Paper/Polymer Capacitors



These are typical curves for KVx capacitors with mica-paper dielectric. Other dielectric systems are available withimproved characteristics. Please contact us for information.

KVx 10 S 473 J 0 T

Type

Rated Voltage10 = 10kV05 = 5kV

CharacteristicS = Standard PerformanceC = High Current, <5% tol.E = High Energy Density

Capacitance471 = 470pF472 = 4700pF4732 = 47300pF47R3 = 47.3pF

ToleranceE = ±0.5%F = ±1%G = ±2%J = ±5%K = ±10%M = ±20%

Temperature0 = -55°C to 125°C1 = -65°C to 125°C2 = -65°C to 150°C3 = -65°C to 200°C4 = -65°C to 260°C

PackageT = Tape wrap/end fillM= Molded, vacuumG = Glass/epoxy tubeB = Bare element

Order by complete Part Number. We will assign you a new number when your part is manufactured.Use Outline Drawings and Typical Ratings as a capability guide. They are for mica-paper capacitors in Type T packages with S characteris-tic. Standard leads are AWG #18 centered on the ends for less than 20 kVdc and offset as shown for 20 kVdc and up. See Terminations foroptional leads and terminals.We invite you to challenge us with your special requirements for high-voltage and pulse capacitors.Also feel free to request custom shapes for G and M package units. Those packages can deliver unique shapes and configurations and arenot limited to the simple, rectangular shapes shown here.

Pulse, Hi-Frequency& SnubberCapacitors

Pulse,High-Frequency

and SnubberCapacitors



CORNELLDUBILIER


Selector Guide, Pulse, High-Frequency and Snubber Capacitors

Voltage Capacitance dV/dt Peak RMSForm Range Range Range Current Current PageFactor Type Description (Vdc) (µF) (V/µs) (A) (A) Number

IGBT Snubber Capacitor Modules

Polypropylene Pulse and High-Frequency Capacitors

Mica Pulse and High-Frequency Capacitors

Oil-Filled Snubber Capacitors

SCD

SCM

SCC

940C

941C

942C

943C

DP Types

CD Types

SNU

5.002

5.004

5.006

5.007

5.009

5.011

5.013

5.015

5.025

5.029

600-2000

600-1200

600-1200

600-3000

600-3000

600-2000

600-2000

250-2000

500-1500

1000-2000

.22-4.7

.47-2

.47-2

.01-4.7

.01-4.7

.01-2.5

.01-2.5

.001-1

.0001-.01

.05-2

150-800

150-600

150-600

196-2568

196-2568

574-5137

574-5137

640-60,000

100,000

300-600

118-1200

300-1000

300-500

20-1000

20-1000

51-1570

51-1570

23-640

20-3700

up to300 A

up to50 A

up to50 A

up to50 A

up to25 A

up to25A

up to25 A

up to25 A

up to10 A

up to9 A

up to12 A

polypropylenecapacitor, <20 nH,fits 23 to 28 mmlead spacing

polypropylenecapacitor & hyper-fast diode, <20 nH,fits 23 to 28 mmlead spacing

2 polypropylenecapacitors & hyper-fast diodes, <20 nH,fits 23 to 28 mmlead spacing, dualIGBTs

double metallized

double metallized

foil/metallized hybrid

foil/metallized hybrid

film/foil

silver mica

film/paper, extendedfoil, for SCRs




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type SCD, IGBT Snubber Capacitor Modules

Style SCDDirect Mount Applications

Style SCD offers protection against voltage tran-sients in low to medium current IGBT applicationswhere high dV/dt is encountered. Connect thesecapacitors from C1 to E2 on a dual IGBT moduleor from P to N on a six-pack module to eliminatesevere voltage transients. Parts ending with Z25 fitIGBTs with 23mm, 25mm and 28mm lead spac-ing. If you have a preferred lead spacing, pleasespecify.

Highlights• High peak & RMS current capability• Mount directly to the IGBT module• Low inductance <20nH• Low loss polypropylene dielectric• Self healing• Flame resistant case and resin, meets UL94V0• Other terminal spacing and capacitance values

available. We can build to your specs!• 85°C ambient temperature

CAP dV/dt ESR Arms DIMENSIONS (in)PART NUMBER µF Vdc Vac (V/µs) Ipk(A) mΩ (55°C) W L H

SCD474K601A3Z25 0.47 600 330 250 118 9 9.2 0.970 1.850 0.950SCD684K601A3Z25 0.68 600 330 250 170 7 11.5 1.140 1.850 1.050SCD105K601A3Z25 1.0 600 330 200 200 5 14.0 1.140 1.850 1.050SCD155K601A3Z25 1.5 600 300 150 225 4 17.1 1.140 1.850 1.050SCD205K601A3Z25 2.0 600 300 150 300 3 20.7 1.270 1.775 1.400SCD335K601A3Z25 3.3 600 400 300 825 5 35.0 1.500 2.050 1.500SCD475K601A3Z25 4.7 600 400 250 1175 4 46.2 1.825 2.225 1.975SCD474K102A3Z25 0.47 1000 330 250 118 11 9.2 0.970 1.850 0.950SCD474K102D3Z25 0.47 1000 500 700 329 8 12.1 1.140 1.850 1.050SCD684K102A3Z25 0.68 1000 330 200 136 7 11.5 1.140 1.850 1.050SCD684K102D3Z25 0.68 1000 500 500 340 7 14.4 1.140 1.850 1.050SCD105K102A3Z25 1.0 1000 330 200 200 4 14.0 1.140 1.850 1.050SCD105K102D3Z25 1.0 1000 500 400 400 5 17.5 1.140 1.850 1.050SCD155K102A3Z25 1.5 1000 300 160 240 4 17.9 1.270 1.775 1.400SCD155K102D3Z25 1.5 1000 500 400 600 3 22.4 1.370 1.775 1.400SCD205K102A3Z25 2.0 1000 300 160 320 4 20.9 1.370 1.775 1.400SCD205K102D3Z25 2.0 1000 500 400 800 5 26.2 1.500 2.050 1.500



CORNELLDUBILIER


Type SCD, IGBT Snubber Capacitor Modules

Mounting Across the Bus?CDE Will Accommodate Your Bus Structure

Note: Modify PART NUMBER to specify lead spacing. Example: 44mm spacing would use –44 instead of Z25.

For additional ratings, contact factory.

Other capacitance values and lead orientations are available. Contact us.

CAP dV/dt ESR Arms DIMENSIONS (in)PART NUMBER µF Vdc Vac (V/µs) Ipk(A) mΩ (55°C) W L H

SCD224K122A3Z25 0.22 1200 580 650 143 19 7.9 0.970 1.850 0.950SCD334K122A3Z25 0.33 1200 580 650 215 13 10.0 1.140 1.850 1.050SCD474K122A3Z25 0.47 1200 580 500 235 10 12.0 1.140 1.850 1.050SCD684K122A3Z25 0.68 1200 580 500 340 7 15.1 1.270 1.775 1.400SCD105K122A3Z25 1.0 1200 580 500 500 5 18.5 1.370 1.775 1.400SCD155K122A3Z25 1.5 1200 580 400 600 4 23.9 1.500 2.050 1.500SCD205K122A3Z25 2.0 1200 580 400 800 4 30.1 1.825 2.225 1.975SCD305K122C3Z25 3.0 1200 580 400 1200 5 39.7 3.000 2.475 1.500SCD224K162A3Z25 0.22 1600 630 650 143 19 7.9 0.970 1.850 0.950SCD334K162A3Z25 0.33 1600 630 650 215 12 10.0 1.140 1.850 1.050SCD474K162A3Z25 0.47 1600 630 650 306 10 12.6 1.270 1.775 1.400SCD684K162A3Z25 0.68 1600 630 650 442 7 15.3 1.370 1.775 1.400SCD105K162A3Z25 1.0 1600 630 500 500 6 19.5 1.500 2.050 1.500SCD155K162A3Z25 1.5 1600 630 400 600 5 25.6 1.600 2.700 1.500SCD205K162A3Z25 2.0 1600 630 400 800 5 30.6 1.750 2.625 1.825SCD224K202A3Z25 0.22 2000 630 800 176 19 8.2 0.970 1.850 0.950SCD334K202A3Z25 0.33 2000 630 800 264 13 10.5 1.270 1.775 1.400SCD474K202A3Z25 0.47 2000 630 600 282 10 13.0 1.350 2.200 1.200SCD684K202A3Z25 0.68 2000 630 600 408 8 16.1 1.500 2.050 1.500SCD105K202A3Z25 1.0 2000 630 600 600 6 21.3 1.825 2.225 1.975




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type SCM, Single/Dual IGBT Snubber Capacitor Modules

ApplicationsUse style SCM as a discharge restrictive de-cou-pling to protect dual IGBT modules from overvolt-age, Figure 1. Style SCM may also be used as an“N” or “P” type snubber component for a clampsnubber where single IGBT modules are used,Figure 2.

Highlights• Mount directly to the IGBT module• Low inductance• Low Loss• Hyperfast diodes integrated into package

• 1 or 2 wire taps for connecting external resistor• Flame resistant case and epoxy, meets UL 94VO• Other terminal pitches and capacitance values

available.

Discharge Restrictive De-couplingThe circuit in Figure 1 operates on the same prin-ciples as the de-coupling capacitor, but only dur-ing turn-off switching. As the IGBT turns off, ener-gy trapped in the loop inductance is transferred tothe capacitor. The diode blocks oscillations fromoccurring and excess charge on the capacitor isdischarged through the external resistor.

RCD ClampThe function of this snubber is similar to a clamp,Figure 2. At turn-off, the snubber diode is forwardbiased and the snubber is activated. The energytrapped in the stray inductance is absorbed by thesnubber capacitor. During turn-on the snubber capsthat were fully charged to bus voltage have a dis-charge path through the forward biased free-wheeldiode, the IGBT, and the snubber resistors. Thisreduces the reverse recovery voltage transient.

ExternalResistor

SCM"N" TypeModule

DualIGBTModule

Figure 1Style SCM Discharge restrictive decoupling used

to protect dual IGBT modules

SingleIGBTModule

SCM"P" TypeModule

External Resistors

SCM"N" TypeModule

SingleIGBTModule

Figure 2Style SCM “P” type and “N” type used as a clamp

to protect an inverter using two “single” IGBT modules.



CORNELLDUBILIER


Type SCM, Single/Dual IGBT Snubber Capacitor Modules

P

UL1015 AWG18L= 200 mm min.

15mm8mm

5mm

16mm

7mm dia

C E

L W

H

C E

R

C E

R

P TYPE N TYPE

Specify “N” type or “P” type

Typical Application Ipk(A), Tc = 25°CIGBT Module Diode Repetitive

Cap Ic/Vce Characteristics Ipk(A) Surge 20 kHz Dimensions (in.)Part Number µF S=Single, D=Dual Vrrm/If/trr(µs) Tc = 25°C Sq Wave W L H P(mm)SCM474K601H7N29 0.47 200S-300S/600 600/30/<.040 300 70 1.725 2.200 1.340 29SCM474K601H7P29 0.47 200S-300S/600 600/30/<.040 300 70 1.725 2.220 1.340 29SCM105K601H7[ ]24 1.0 100D-200D/600 600/30/<.040 300 70 1.500 1.875 1.250 24SCM105K601H5[ ]29 1.0 300S-400S/600 600/50/<.045 500 100 1.825 2.225 1.500 29SCM155K601H7N24 1.5 200D-300D/600 600/30/<.040 300 70 1.350 2.200 1.200 24SCM155K601H7P24 1.5 200D-300D/600 600/30/<.040 300 70 1.500 1.875 1.250 24SCM205K601H5[ ]24 2.0 300D-400D/600 600/50/<.045 500 100 1.725 2.220 1.340 24SCM205K601H2[ ]29 2.0 400S-600S/600 600/100/<.050 1000 200 1.825 2.225 1.500 29SCM474K122H8N29 0.47 200S-300S/1200 1200/30/<.065 300 60 1.350 2.200 1.200 29SCM474K122H8P29 0.47 200S-300S/1200 1200/30/<.065 300 60 1.500 1.875 1.250 29SCM105K122H8[ ]24 1.0 100D-200D/1200 1200/30/<.065 300 60 1.750 2.500 1.470 24SCM105K122H4N29 1.0 300S-400S/1200 1200/50/<.085 500 100 1.725 2.200 1.340 29SCM105K122H4P29 1.0 300S-400S/1200 1200/50/<.085 500 100 1.825 2.225 1.500 29SCM155K122H8N24 1.5 200D-300D/1200 1200/30/<.065 300 60 1.750 2.500 1.470 24SCM155K122H8P24 1.5 200D-300D/1200 1200/30/<.065 300 60 1.825 2.225 1.500 24SCM205K122H4[ ]24 1.5 300D-400D/1200 1200/50/<.065 500 100 2.125 2.500 1.700 24SCM205K122H1[ ]29 2.0 400S-600S/1200 1200/100/<.090 1000 200 2.125 2.500 1.700 29




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type SCC, Dual IGBT Clamp-Snubber Modules

ApplicationsStyle SCC is ideal for use in medium to high cur-rent applications where a dual IGBT module isused. This low loss snubber directly reduces turn-off voltage overshoots and is effective in reducingturn-on voltage transients.

Highlights• Mount directly to the IGBT module• Low inductance• Low loss polypropylene dielectric• High peak current• Hyperfast diodes integrated into package• Wire taps for connecting external resistors• Flame resistant case and epoxy meet UL 94VO

WL

R1R2

W2 P P

UL1015AWG20L = 150min.

14 mm

C1 E1/C2E2

14 mm

7 mm

H

6.5mm X 8.5mm

5 mm

DualIGBTModule

SCCClampModule

External Resistors

Style SCC

Ipk(A), Tc = 25°CTypical Application Diode Repetitive

Cap DUAL IGBT Characteristics Ipk(A) Surge 20 kHz Dimensions (in.)Part Number µF Ic/Vce Vrrm/Io/trr(µs) Tc = 25°C Sq Wave W L H W2 P(mm)SCC105K601H7-24 1.0 100/600 600/30/.040 300 70 2.000 3.000 1.250 0.56 24SCC155K601H7-24 1.5 200-300/600 600/30/.040 300 70 2.000 3.000 1.250 0.56 24SCC205K601H5-24 2.0 400/600 600/50/.045 500 100 2.000 3.000 1.250 0.56 24SCC205K601H5-28 2.0 400/600 600/50/.045 500 100 2.000 3.000 1.250 0.40 28SCC474K122H8-24 0.47 100/1200 1200/30/.065 300 60 2.000 3.000 1.250 0.56 24SCC474K122H8-28 0.47 100/1200 1200/30/.065 300 60 2.000 3.000 1.250 0.40 28SCC105K122H8-24 1.0 150/1200 1200/30/.065 300 60 2.475 3.000 1.500 0.56 24SCC105K122H8-28 1.0 150/1200 1200/30/.065 300 60 2.475 3.000 1.500 0.40 28SCC155K122H4-24 1.5 200/1200 1200/50/.085 500 100 2.500 3.500 1.575 0.81 24SCC155K122H4-28 1.5 200/1200 1200/50/.085 500 100 2.500 3.500 1.575 0.65 28SCC205K122H4-24 2.0 300/1200 1200/50/.085 500 100 2.800 3.625 1.700 0.87 24SCC205K122H4-28 2.0 300/1200 1200/50/.085 500 100 2.800 3.625 1.700 0.71 28



CORNELLDUBILIER


Type 940C, High dV/dt,Round Polypropylene Pulse & High-Frequency Applications Capacitors


Specifications

Type 940C round, axial film capacitors usepolypropylene film and dual metallized electrodesfor both self healing properties and high peakcurrent carrying capability (dV/dt). This seriesfeatures low ESR characteristics, excellent highfrequency and high voltage capabilities.



NOTE: Request for non-listed capacitance values, size modifications andapplication specific requirements are welcomed by our engineering staff.

Typical Typical Cap. Catalog D L d ESR ESL dV/dt I peak IRMSµF Number Inches (mm) Inches (mm) Inches (mm) milliohms nH V/µs A A

600 Vdc (275 Vac).10 940C6P1K .354 (9.0) 1.339 (34.0) .032 (.8) 28 19 196 20 2.5.15 940C6P15K .413 (10.5) 1.339 (34.0) .040 (1.0) 13 20 196 29 4.0.22 940C6P22K .453 (11.5) 1.339 (34.0) .040 (1.0) 12 20 196 43 4.4.33 940C6P33K .531 (13.5) 1.339 (34.0) .040 (1.0) 9 21 196 65 5.6.47 940C6P47K .610 (15.5) 1.339 (34.0) .040 (1.0) 7 22 196 92 6.9.68 940C6P68K .709 (18.0) 1.339 (34.0) .040 (1.0) 6 23 196 134 8.1

1.00 940C6W1K .827 (21.0) 1.339 (34.0) .040 (1.0) 6 24 196 196 8.91.50 940C6W1P5K .984 (25.0) 1.339 (34.0) .047 (1.2) 5 26 196 295 10.92.00 940C6W2K .925 (23.5) 1.811 (46.0) .047 (1.2) 5 31 128 255 11.83.30 940C6W3P3K 1.063 (27.0) 2.126 (54.0) .047 (1.2) 4 36 105 346 15.34.70 940C6W4P7K 1.240 (31.5) 2.126 (54.0) .047 (1.2) 4 38 105 492 16.8

850 Vdc (450 Vac).15 940C8P15K .512 (13.0) 1.339 (34.0) .040 (1.0) 8 21 713 107 5.8.22 940C8P22K .610 (15.5) 1.339 (34.0) .040 (1.0) 8 22 713 157 6.4.33 940C8P33K .709 (18.0) 1.339 (34.0) .040 (1.0) 7 23 713 235 7.5.47 940C8P47K .827 (21.0) 1.339 (34.0) .040 (1.0) 5 24 713 335 9.8.68 940C8P68K .965 (24.5) 1.339 (34.0) .047 (1.2) 4 26 713 485 12.0


1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX. D MAX.

d


Polypropylene



Normally Stocked




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type 940C, High dV/dt,Round Polypropylene Pulse & High-Frequency Applications Capacitors





1.000 940C10W1K 1.024 (26.0) 1.811 (46.0) .047 (1.2) 5 32 480 480 12.51.500 940C10W1P5K 1.220 (31.0) 1.811 (46.0) .047 (1.2) 4 34 480 720 15.62.000 940C10W2K 1.398 (35.5) 1.811 (46.0) .047 (1.2) 3 36 480 960 19.6


1.000 940C12W1K 1.299 (33.0) 1.811 (46.0) .047 (1.2) 5 35 640 640 14.51.500 940C12W1P5K 1.378 (35.0) 2.126 (54.0) .047 (1.2) 4 39 502 754 17.9

1600 Vdc (630 Vac).100 940C16P1K .709 (18.0) 1.339 (34.0) .040 (1.0) 7 23 1427 143 7.5.150 940C16P15K .846 (21.5) 1.339 (34.0) .040 (1.0) 5 24 1427 214 9.9.220 940C16P22K 1.004 (25.5) 1.339 (34.0) .047 (1.2) 7 26 1427 314 9.3.330 940C16P33K .925 (23.5) 1.811 (46.0) .047 (1.2) 7 31 800 264 10.0.470 940C16P47K 1.083 (27.5) 1.811 (46.0) .047 (1.2) 6 32 800 376 11.8.680 940C16P68K 1.280 (32.5) 1.811 (46.0) .047 (1.2) 6 35 800 544 13.1

1.000 940C16W1K 1.535 (39.0) 1.811 (46.0) .047 (1.2) 5 37 800 800 16.21.500 940C16W1P5K 1.654 (42.0) 2.126 (54.0) .047 (1.2) 4 42 628 942 20.1


1.000 940C20W1K 1.614 (41.0) 2.126 (54.0) .047 (1.2) 5 42 754 754 17.7


Normally Stocked



CORNELLDUBILIER


Type 941C, High dV/dt,Oval Polypropylene Pulse & High-Frequency Applications Capacitors


Specifications

Type 941C flat, oval film capacitors usepolypropylene film and dual metallized electrodesfor both self healing properties and high peakcurrent carrying capability (dV/dt). This seriesfeatures low ESR characteristics, excellent highfrequency and high voltage capabilities. For roundconfiguration see Type 940C, pages 5.007 &5.008.






600 Vdc (275 Vac).10 941C6P1K .223 (5.7) .470 (11.9) 1.339 (34.0) .032 (.8) 28 17 196 20 2.8.15 941C6P15K .266 (6.8) .513 (13.0) 1.339 (34.0) .040 (1.0) 13 18 196 29 4.4.22 941C6P22K .318 (8.1) .565 (14.3) 1.339 (34.0) .040 (1.0) 12 19 196 43 4.9.33 941C6P33K .387 (9.8) .634 (16.1) 1.339 (34.0) .040 (1.0) 9 19 196 65 6.1.47 941C6P47K .462 (11.7) .709 (18.0) 1.339 (34.0) .040 (1.0) 7 20 196 92 7.6.68 941C6P68K .558 (14.2) .805 (20.4) 1.339 (34.0) .040 (1.0) 6 21 196 134 8.9

1.00 941C6W1K .680 (17.3) .927 (23.5) 1.339 (34.0) .040 (1.0) 6 23 196 196 9.91.50 941C6W1P5K .837 (21.3) 1.084 (27.5) 1.339 (34.0) .047 (1.2) 5 24 196 295 12.12.00 941C6W2K .717 (18.2) 1.088 (27.6) 1.811 (46.0) .047 (1.2) 5 28 128 255 13.13.30 941C6W3P3K .886 (22.5) 1.253 (31.8) 2.126 (54.0) .047 (1.2) 4 34 105 346 17.34.70 941C6W4P7K 1.125 (28.6) 1.311 (33.3) 2.126 (54.0) .047 (1.2) 4 36 105 492 18.7


1.00 941C8W1K .679 (17.2) 1.050 (26.7) 1.811 (46.0) .047 (1.2) 5 28 400 400 12.71.50 941C8W1P5K .847 (21.5) 1.218 (30.9) 1.811 (46.0) .047 (1.2) 4 30 400 600 15.82.00 941C8W2K .990 (25.1) 1.361 (34.6) 1.811 (46.0) .047 (1.2) 3 31 400 800 19.82.20 941C8W2P2K 1.042 (26.5) 1.413 (35.9) 1.811 (46.0) .047 (1.2) 3 32 400 880 20.42.50 941C8W2P5K 1.117 (28.4) 1.488 (37.8) 1.811 (46.0) .047 (1.2) 3 33 400 1000 21.2

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX.

T MAX.

d


Polypropylene



W MAX.




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type 941C, High dV/dt,Oval Polypropylene Pulse & High-Frequency Applications Capacitors




1000 Vdc (500 Vac).150 941C10P15K .441 (11.2) .688 (17.5) 1.339 (34.0) .040 (1.0) 7 20 856 128 7.4.220 941C10P22K .535 (13.6) .782 (19.9) 1.339 (34.0) .040 (1.0) 7 21 856 188 8.1.330 941C10P33K .658 (16.7) .906 (23.0) 1.339 (34.0) .040 (1.0) 6 22 856 283 9.7.470 941C10P47K .790 (20.1) 1.037 (26.3) 1.339 (34.0) .047 (1.2) 5 24 856 402 11.7.680 941C10P68K .955 (24.2) 1.203 (30.5) 1.339 (34.0) .047 (1.2) 5 26 856 582 13.0

1.000 941C10W1K .803 (20.4) 1.174 (29.8) 1.811 (46.0) .047 (1.2) 5 24 480 480 13.81.500 941C10W1P5K 1.001 (25.4) 1.372 (34.8) 1.811 (46.0) .047 (1.2) 4 31 480 720 17.32.000 941C10W2K 1.169 (29.7) 1.540 (39.1) 1.811 (46.0) .047 (1.2) 3 33 480 960 21.7

1200 Vdc (500 Vac).100 941C12P1K .462 (11.7) .709 (18.0) 1.339 (34.0) .040 (1.0) 9 20 1142 114 6.7.150 941C12P15K .568 (14.4) .815 (20.7) 1.339 (34.0) .040 (1.0) 7 21 1142 171 8.3.220 941C12P22K .691 (17.5) .938 (23.8) 1.339 (34.0) .040 (1.0) 7 23 1142 251 9.2.330 941C12P33K .575 (14.6) .946 (24.0) 1.811 (46.0) .040 (1.0) 7 21 640 211 10.0.470 941C12P47K .698 (17.7) 1.069 (27.1) 1.811 (46.0) .047 (1.2) 7 28 640 301 10.9.680 941C12P68K .854 (21.7) 1.225 (31.1) 1.811 (46.0) .047 (1.2) 6 30 640 435 13.0

1.000 941C12W1K 1.053 (26.7) 1.423 (36.1) 1.811 (46.0) .047 (1.2) 5 32 640 640 15.91.500 941C12W1P5K 1.088 (27.6) 1.582 (40.2) 2.126 (54.0) .047 (1.2) 4 36 502 754 19.7

1600 Vdc (630 Vac).100 941C16P1K .565 (14.3) .813 (20.6) 1.339 (34.0) .040 (1.0) 7 21 1427 143 8.3.150 941C16P15K .696 (17.7) .943 (23.9) 1.339 (34.0) .040 (1.0) 5 23 1427 214 11.0.220 941C16P22K .848 (21.5) 1.095 (27.8) 1.339 (34.0) .047 (1.2) 7 24 1427 314 10.3.330 941C16P33K .715 (18.2) 1.086 (27.6) 1.811 (46.0) .047 (1.2) 7 23 800 264 11.0.470 941C16P47K .867 (22.0) 1.238 (31.4) 1.811 (46.0) .047 (1.2) 6 30 800 376 13.1.680 941C16P68K 1.059 (26.9) 1.430 (36.3) 1.811 (46.0) .047 (1.2) 6 32 800 544 14.5

1.000 941C16W1K 1.303 (33.1) 1.674 (42.5) 1.811 (46.0) .047 (1.2) 5 35 800 800 17.91.500 941C16W1P5K 1.358 (34.5) 1.852 (47.0) 2.126 (54.0) .047 (1.2) 4 39 628 942 22.2

2000 Vdc (630 Vac).022 941C20S22K .313 (7.9) .561 (14.2) 1.339 (34.0) .040 (1.0) 35 18 1712 38 2.8.033 941C20S33K .382 (9.7) .629 (16.0) 1.339 (34.0) .040 (1.0) 20 19 1712 57 4.1.047 941C20S47K .456 (11.6) .703 (17.8) 1.339 (34.0) .040 (1.0) 12 20 1712 80 5.7.068 941C20S68K .550 (14.0) .797 (20.2) 1.339 (34.0) .040 (1.0) 8 21 1712 116 7.7.100 941C20P1K .670 (17.0) .917 (23.3) 1.339 (34.0) .040 (1.0) 7 22 1712 171 9.1.150 941C20P15K .557 (14.1) .928 (23.6) 1.811 (46.0) .040 (1.0) 7 21 960 144 9.8.220 941C20P22K .686 (17.4) 1.057 (26.8) 1.811 (46.0) .040 (1.0) 8 28 960 211 10.1.330 941C20P33K .856 (21.7) 1.227 (31.2) 1.811 (46.0) .047 (1.2) 8 30 960 317 11.3.470 941C20P47K 1.037 (26.3) 1.408 (35.8) 1.811 (46.0) .047 (1.2) 6 32 960 451 14.4.560 941C20P56K .941 (23.9) 1.436 (36.5) 2.126 (54.0) .047 (1.2) 7 31 754 422 13.9.680 941C20P68K 1.050 (26.7) 1.545 (39.2) 2.126 (54.0) .047 (1.2) 6 35 754 513 15.8

1.000 941C20W1K 1.303 (33.1) 1.797 (45.6) 2.126 (54.0) .047 (1.2) 5 38 754 754 19.4




CORNELLDUBILIER


Type 942C, Very High dV/dt,Polypropylene Pulse & High-Frequency Applications Capacitors


Specifications

Type 942C round, axial film capacitors utilize ahybrid section design of polypropylene film, metalfoils and metallized polypropylene dielectric toachieve both high peak current as well as superiorrms current ratings. This series is ideal for highpulse operation and high peak current circuits.









1.00 942C8W1K 1.102 (28.0) 1.811 (46.0) .047 (1.2) 5 32 960 960 13.11.50 942C8W1P5K 1.142 (29.0) 2.126 (54.0) .047 (1.2) 4 36 754 1131 15.92.00 942C8W2K 1.161 (29.5) 2.520 (64.0) .047 (1.2) 3 41 574 1148 19.9


Polypropylene

FoilConstruction

600 Vdc and Higher

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX. D MAX.

d

Normally Stocked




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type 942C, Very High dV/dt,Polypropylene Pulse & High-Frequency Applications Capacitors





1.000 942C10W1K 1.181 (30.0) 2.126 (54.0) .047 (1.2) 5 37 1005 1005 14.61.400 942C10W1P4K 1.240 (31.5) 2.520 (64.0) .047 (1.2) 4 41 765 1071 17.9

1200 Vdc (430 Vac).100 942C12P1K .748 (19.0) 1.339 (34.0) .040 (1.0) 5 23 2854 285 9.2.150 942C12P15K .887 (22.5) 1.339 (34.0) .040 (1.0) 5 24 2854 428 10.2.220 942C12P22K 1.043 (26.5) 1.339 (34.0) .047 (1.2) 6 26 2854 628 10.3.330 942C12P33K .965 (24.5) 1.811 (46.0) .047 (1.2) 6 31 1600 528 11.0.470 942C12P47K 1.142 (29.0) 1.811 (46.0) .047 (1.2) 5 32 1600 752 13.4.680 942C12P68K 1.201 (30.5) 2.126 (54.0) .047 (1.2) 5 37 1256 854 14.7.900 942C12P9K 1.220 (31.0) 2.520 (64.0) .047 (1.2) 5 41 957 861 15.9



Normally Stocked



CORNELLDUBILIER


Type 943C, Very High dV/dt,Oval Polypropylene Pulse & High-Frequency Applications Capacitors


Specifications

Type 943C oval, axial film capacitors utilize ahybrid section design of polypropylene film, metalfoils and metallized polypropylene dielectric toachieve both high peak current as well as superiorrms current ratings. This series is ideal for highpulse operation and high peak current circuits.







1.00 943C6W1K .758 (19.2) 1.128 (28.6) 1.811 (46.0) .047 (1.2) 5 28 800 800 13.41.50 943C6W1P5K .926 (23.5) 1.296 (32.9) 1.811 (46.0) .047 (1.2) 4 30 800 1200 16.62.00 943C6W2K .947 (24.0) 1.318 (33.5) 2.126 (54.0) .047 (1.2) 3 33 628 1256 20.62.20 943C6W2P2K .993 (25.2) 1.364 (34.6) 2.126 (54.0) .047 (1.2) 3 34 628 1382 21.12.50 943C6W2P5K 1.063 (27.0) 1.437 (36.5) 2.126 (54.0) .047 (1.2) 3 35 628 1570 21.9

850 Vdc (360 Vac).15 943C8P15K .548 (13.9) .733 (18.6) 1.339 (34.0) .040 (1.0) 5 20 1712 257 9.4.22 943C8P22K .644 (16.4) .829 (21.0) 1.339 (34.0) .040 (1.0) 7 21 1712 377 8.7.33 943C8P33K .769 (19.5) .954 (24.2) 1.339 (34.0) .040 (1.0) 6 23 1712 565 10.3.47 943C8P47K .902 (22.9) 1.087 (27.6) 1.339 (34.0) .047 (1.2) 5 24 1712 805 12.4.68 943C8P68K 1.068 (27.1) 1.254 (31.8) 1.339 (34.0) .047 (1.2) 4 26 1712 1164 15.3

1.00 943C8W1K .882 (22.4) 1.252 (31.8) 1.811 (46.0) .047 (1.2) 5 29 960 960 14.51.50 943C8W1P5K .956 (24.3) 1.327 (33.7) 2.126 (54.0) .047 (1.2) 4 34 754 1131 18.02.00 943C8W2K .972 (24.7) 1.346 (34.2) 2.520 (64.0) .047 (1.2) 3 38 574 1147 22.4

1.625”(41mm)

MIN.

1.625”(41mm)

MIN.L MAX.

T MAX.

d

W MAX.


Polypropylene

Foil





Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type 943C, Very High dV/dt,Oval Polypropylene Pulse & High-Frequency Applications Capacitors




1000 Vdc (400 Vac).100 943C10P1K .569 (14.4) .755 (19.2) 1.339 (34.0) .040 (1.0) 8 20 2283 228 7.6.150 943C10P15K .677 (17.2) .862 (21.9) 1.339 (34.0) .040 (1.0) 7 22 2283 342 8.9.220 943C10P22K .802 (20.4) .987 (25.1) 1.339 (34.0) .040 (1.0) 6 23 2283 502 10.6.330 943C10P33K .654 (16.6) 1.025 (26.0) 1.811 (46.0) .040 (1.0) 5 27 1280 422 12.5.470 943C10P47K .777 (19.7) 1.148 (29.1) 1.811 (46.0) .047 (1.2) 5 28 1280 601 13.6.680 943C10P68K .933 (23.7) 1.304 (33.1) 1.811 (46.0) .047 (1.2) 5 30 1280 870 14.9

1.000 943C10W1K 1.002 (25.4) 1.373 (34.9) 2.126 (54.0) .047 (1.2) 5 34 1005 1005 16.51.400 943C10W1P4K 1.035 (26.3) 1.417 (36.0) 2.520 (64.0) .047 (1.2) 4 39 765 1071 20.1

1200 Vdc (430 Vac).100 943C12P1K .675 (17.1) .860 (21.8) 1.339 (34.0) .040 (1.0) 5 22 2854 285 10.5.150 943C12P15K .807 (20.5) .992 (25.2) 1.339 (34.0) .040 (1.0) 5 23 2854 428 11.6.220 943C12P22K .960 (24.4) 1.145 (29.1) 1.339 (34.0) .047 (1.2) 6 25 2854 628 11.7.330 943C12P33K .794 (20.2) 1.165 (29.6) 1.811 (46.0) .047 (1.2) 6 28 1600 528 12.5.470 943C12P47K .946 (24.0) 1.317 (33.4) 1.811 (46.0) .047 (1.2) 5 30 1600 752 15.0.680 943C12P68K 1.008 (25.6) 1.379 (35.0) 2.126 (54.0) .047 (1.2) 5 36 1256 854 16.5.900 943C12P9K 1.012 (25.7) 1.383 (35.1) 2.520 (64.0) .047 (1.2) 5 39 956 860 17.7

1600 Vdc (460 Vac).022 943C16S22K .416 (10.6) .602 (15.3) 1.339 (34.0) .040 (1.0) 27 19 3425 75 3.5.033 943C16S33K .487 (12.4) .673 (17.1) 1.339 (34.0) .040 (1.0) 14 20 3425 113 5.3.047 943C16S47K .563 (14.3) .748 (19.0) 1.339 (34.0) .040 (1.0) 8 20 3425 161 7.6.068 943C16S68K .659 (16.7) .844 (21.4) 1.339 (34.0) .040 (1.0) 6 21 3425 233 9.5.100 943C16P1K .780 (19.8) .966 (24.5) 1.339 (34.0) .040 (1.0) 4 23 3425 342 12.8.150 943C16P15K .636 (16.1) 1.006 (25.5) 1.811 (46.0) .040 (1.0) 5 26 1919 288 12.3.220 943C16P22K .765 (19.4) 1.136 (28.8) 1.811 (46.0) .040 (1.0) 5 28 1919 422 13.5.330 943C16P33K .935 (23.7) 1.306 (33.2) 1.811 (46.0) .047 (1.2) 5 30 1919 633 14.9.470 943C16P47K .989 (25.1) 1.360 (34.5) 2.126 (54.0) .047 (1.2) 5 34 1507 708 16.3.560 943C16P56K .957 (24.3) 1.327 (33.7) 2.520 (64.0) .047 (1.2) 5 38 1147 642 17.2.680 943C16P68K 1.047 (26.6) 1.417 (36.0) 2.520 (64.0) .047 (1.2) 5 40 1147 780 18.0


Cap. Catalog L H T S d Ipk Irms, AmpsµF Number in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Amps 1 kHz 10 kHz 100 kHz

.010 DPP2S1K .590 (15.0) .470 (12.0) .280 (7.0) .394 (10.0) .024 (.6) 69 .009 .088 .55

.012 DPFF2S12J .700 (17.8) .320 (8.1) .260 (6.6) .374 (9.5) .032 (.8) 55 .012 .12 .66

.015 DPP2S15K .591 (15.0) .473 (12.0) .300 (7.5) .390 (10.0) .024 (.6) 100 .013 .13 .69

.015 DPFF2S15J .750 (19.1) .370 (9.4) .370 (9.4) .374 (9.5) .032 (.8) 69 .015 .15 .74

.018 DPFF2S18J .700 (17.8) .350 (8.9) .290 (7.4) .374 (9.5) .032 (.8) 83 .018 .18 .81

.022 DPP2S22J .591 (15.0) .512 (13.0) .315 (8.0) .390 (10.0) .024 (.6) 150 .019 .19 .86

.022 DPFF2S22J .750 (19.1) .420 (10.7) .420 (10.7) .374 (9.5) .032 (.8) 100 .021 .21 .90

.027 DPFF2S27J .700 (17.8) .390 (9.9) .330 (8.4) .374 (9.5) .032 (.8) 120 .026 .26 1.10

.033 DPFF2S33J .750 (19.1) .420 (10.7) .420 (10.7) .370 (9.4) .032 (.8) 150 .032 .32 1.20

.033 DPP2S33K .788 (20.0) .551 (14.0) .335 (8.5) .590 (15.0) .024 (.6) 140 .029 .29 1.20

.039 DPMF2S39K .700 (17.8) .560 (14.2) .320 (8.1) .375 (9.5) .032 (.8) 170 .038 .38 1.30

.039 DPFF2S39J .900 (22.9) .380 (9.7) .320 (8.1) .374 (9.5) .032 (.8) 94 .038 .38 1.40

.047 DPMF2S47K .700 (17.8) .580 (14.7) .340 (8.6) .375 (9.5) .032 (.8) 210 .046 .46 1.40

.047 DPP2S47K .788 (20.0) .630 (16.0) .354 (9.0) .590 (15.0) .024 (.6) 190 .041 .41 1.60

.056 DPFF2S56J .900 (22.9) .430 (10.9) .370 (9.4) .374 (9.5) .032 (.8) 130 .055 .55 1.80

.068 DPP2S68K .788 (20.0) .630 (16.0) .433 (11.0) .590 (15.0) .024 (.6) 280 .060 .60 2.00

.068 DPFF2S68J .950 (24.1) .450 (11.4) .450 (11.4) .370 (9.4) .032 (.8) 160 .066 .66 2.00

.082 DPMF2S82K .950 (24.1) .600 (15.2) .360 (9.1) .375 (9.5) .032 (.8) 190 .080 .80 2.20



CORNELLDUBILIER


Pulse and High-Frequency, Radial-Leaded Polypropylene Capacitors

Specifications Voltage Range: 250-2000 Vdc (140-500

Vac) Capacitance Range: .001-1 µF Operating Temperature Range: -55°C to

85°CChoose with confidence any of these high peakcurrent, radial-leaded, polypropylene, film/foilcapacitors for your snubber application. Theyare offered here for easy use in snubbers withthe highest peak current ratings listed first.

Ratings

Types DPP, DPPS, DPFF,DPPM, DPMFHighlightsType DPP is standard film/foil construction. TypesDPPS and DPFF are series-wound extended foilwith a floating common foil for 800 Vdc and up.Types DPPM and DPMF are similar except usemetallized polypropylene film for the floatingcommon foil for 800 Vdc and up. This alternateconstruction cuts the capacitor volume by almosthalf.

L

H

S

.123.0 max.

.7920 min.

T

d

250 Vdc (155 Vac)




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER



RatingsCap. Catalog L H T S d Ipk Irms, AmpsµF Number in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Amps 1 kHz 10 kHz 100 kHz

.082 DPFF2S82J 1.250 (31.8) .420 (10.7) .260 (9.1) .720 (18.3) .032 (.8) 110 .080 .80 2.4

.10 DPP2P1K 1.024 (26.0) .710 (18.0) .390 (10.0) .790 (20.0) .032 (.8) 410 .088 .88 2.6

.10 DPFF2P1J 1.250 (31.8) .450 (11.4) .450 (11.4) .720 (18.3) .032 (.8) 140 .097 .97 2.7

.12 DPMF2P12K .950 (24.1) .690 (17.5) .400 (10.2) .375 (9.5) .032 (.8) 280 .12 1.2 2.9

.12 DPFF2P12J 1.250 (31.8) .470 (11.9) .410 (10.4) .720 (18.3) .032 (.8) 170 .12 1.2 3.3

.15 DPP2P15K 1.024 (26.0) .870 (22.0) .470 (12.0) .790 (20.0) .032 (.8) 360 .13 1.3 3.0

.15 DPFF2P15J 1.300 (33.0) .550 (14.0) .550 (14.0) .720 (18.3) .032 (.8) 210 .15 1.5 3.7

.18 DPFF2P18J 1.250 (31.8) .530 (13.5) .470 (11.9) .720 (18.3) .032 (.8) 250 .18 1.8 4.4

.22 DPP2P22K 1.024 (26.0) .940 (24.0) .550 (14.0) .790 (20.0) .032 (.8) 530 .21 2.1 3.0

.22 DPFF2P22J 1.300 (33.0) .620 (15.7) .620 (15.7) .720 (18.3) .032 (.8) 310 .21 2.1 4.8

.27 DPMF2P27K 1.250 (31.8) .750 (19.1) .470 (11.9) .719 (18.3) .032 (.8) 360 .26 2.6 5.2

.27 DPFF2P27J 1.650 (41.9) .550 (14.0) .490 (12.4) 1.095 (27.8) .032 (.8) 190 .26 2.6 6.1

.33 DPP2P33K 1.260 (32.0) .980 (25.0) .590 (15.0) 1.080 (27.5) .032 (.8) 790 .29 2.9 3.0

.33 DPFF2P33J 1.650 (41.9) .650 (16.5) .650 (16.5) 1.095 (27.8) .032 (.8) 240 .32 3.2 6.8

.39 DPMF2P39K 1.250 (31.8) .900 (22.9) .510 (13.0) .719 (18.3) .032 (.8) 510 .38 3.8 6.8

.39 DPFF2P39J 1.650 (41.9) .620 (15.7) .560 (14.7) 1.095 (27.8) .032 (.8) 280 .38 3.8 8.0

.47 DPP2P47K 1.260 (32.0) 1.060 (27.0) .630 (16.0) 1.080 (27.5) .032 (.8) 1100 .41 3.0 3.0

.47 DPFF2P47J 1.700 (43.2) .750 (19.1) .750 (19.1) 1.095 (27.8) .032 (.8) 340 .46 4.6 8.8

.56 DPMF2P56K 1.250 (31.8) 1.000 (25.4) .610 (15.5) .719 (18.3) .032 (.8) 740 .55 5.5 8.8

.68 DPMF2P68K 1.700 (43.2) .940 (23.9) .560 (14.2) 1.094 (27.8) .032 (.8) 440 .66 6.6 10.5

.82 DPMF2P82K 1.700 (43.2) 1.000 (25.4) .610 (15.5) 1.094 (27.8) .032 (.8) 520 .80 8.0 12.01.00 DPMF2W1K 1.700 (43.2) 1.070 (27.2) .680 (17.3) 1.094 (27.8) .032 (.8) 640 .97 9.7 14.0

.0039 DPFF4D39J .700 (17.8) .380 (9.7) .400 (10.2) .374 (9.5) .032 (.8) 23 .005 .049 .40

.0047 DPFF4D47J .700 (17.8) .380 (9.7) .340 (8.6) .374 (9.5) .032 (.8) 28 .006 .059 .43

.0056 DPFF4D56J .700 (17.8) .400 (10.2) .360 (9.1) .374 (9.5) .032 (.8) 34 .007 .070 .47

.0068 DPFF4D68J .700 (17.8) .350 (8.9) .290 (7.8) .374 (9.5) .032 (.8) 41 .009 .085 .52

.0082 DPFF4D82J .700 (17.8) .360 (9.1) .300 (7.6) .374 (9.5) .032 (.8) 49 .010 .100 .57

.010 DPP4S1K .591 (15.0) .550 (14.0) .335 (8.5) .390 (10.0) .024 (.6) 100 .016 .160 .67

.010 DPFF4S1J .700 (17.8) .360 (9.1) .300 (7.6) .374 (9.5) .032 (.8) 60 .013 .130 .63

.012 DPFF4S12J .700 (17.8) .380 (9.7) .320 (8.1) .374 (9.5) .032 (.8) 72 .015 .150 .75

.015 DPP4S15K .591 (15.0) .590 (15.0) .350 (9.0) .390 (10.0) .024 (.6) 150 .024 .240 .87

.015 DPFF4S15J .750 (19.1) .450 (11.4) .450 (11.4) .374 (9.5) .032 (.8) 90 .019 .190 .83

.018 DPFF4S18J .900 (22.9) .370 (9.4) .310 (7.9) .374 (9.5) .032 (.8) 58 .023 .230 1.0

.022 DPP4S22K .790 (20.0) .670 (17.0) .390 (10.0) .590 (15.0) .024 (.6) 220 .035 .350 1.1

.022 DPFF4S22J .900 (22.9) .390 (9.9) .330 (8.4) .374 (9.5) .032 (.8) 70 .028 .280 1.1

.027 DPFF4S27J .900 (22.9) .420 (10.7) .360 (9.1) .374 (9.5) .032 (.8) 86 .034 .340 1.3

.033 DPP4S33K .790 (20.0) .420 (17.0) .390 (10.0) .590 (15.0) .024 (.6) 330 .052 .520 1.4

.033 DPFF4S33J .950 (24.1) .500 (12.7) .500 (12.70 .374 (9.5) .032 (.8) 110 .041 .410 1.4

.039 DPMF4S39K .950 (24.1) .600 (15.2) .360 (9.1) .375 (9.5) .032 (.8) 120 .049 .490 1.5

.039 DPFF4S39J 1.250 (31.8) .410 (10.4) .350 (8.9) .720 (18.3) .032 (.8) 70 .049 .490 1.8

.047 DPP4S47K 1.020 (26.0) .630 (16.0) .354 (9.0) .790 (20.0) .032 (.8) 150 .074 .740 1.7

.047 DPFF4S47J 1.250 (31.8) .430 (10.9) .370 (9.4) .720 (18.3) .032 (.8) 85 .059 .590 2.0

.056 DPMF4S56K .950 (24.1) .680 (17.3) .400 (10.2) .375 (9.5) .032 (.8) 170 .070 .700 2.0

.056 DPFF4S56J 1.250 (33.0) .450 (11.4) .390 (9.9) .720 (18.3) .032 (.8) 100 .070 .700 2.3

.068 DPP4S68K 1.020 (26.0) .710 (18.0) .433 (11.0) .790 (20.0) .032 (.8) 220 .107 1.100 2.2

.068 DPFF4S68J 1.250 (33.0) .480 (12.2) .420 (10.7) .720 (18.3) .032 (.8) 120 .085 .850 2.5

.082 DPFF4S82J 1.250 (33.0) .510 (13.0) .450 (11.4) .720 (18.3) .032 (.8) 150 .100 1.000 2.9

250 Vdc (155 Vac)

400 Vdc (200 Vac)

Cap. Catalog L H T S d Ipk Irms, AmpsµF Number in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Amps 1 kHz 10 kHz 100 kHz

.10 DPP4P1K 1.260 (32.0) .788 (20.0) .473 (12.0) 1.080 (27.5) .032 (.8) 320 .16 1.6 2.9

.10 DPFF4P1J 1.250 (31.8) .540 (13.7) .480 (12.2) .720 (18.3) .032 (.8) 180 .13 1.3 3.2

.12 DPFF4P12J 1.250 (31.8) .580 (14.7) .520 (13.2) .720 (18.3) .032 (.8) 220 .15 1.5 3.7

.15 DPP4P15K 1.260 (32.0) .910 (23.0) .470 (12.0) 1.080 (27.5) .032 (.8) 480 .24 2.4 4.1

.15 DPFF4P15J 1.300 (33.0) .650 (16.5) .650 (16.5) .719 (18.3) .032 (.8) 270 .19 1.9 4.1

.18 DPMF4P18K 1.250 (31.8) .890 (22.6) .500 (12.7) .719 (18.3) .040 (1.0) 310 .23 2.3 4.6

.18 DPFF4P18J 1.650 (41.9) .600 (15.2) .540 (13.7) 1.095 (27.8) .032 (.8) 150 .23 2.3 5.2

.22 DPMF4P22K 1.250 (31.8) .950 (24.1) .570 (14.5) .719 (18.3) .040 (1.0) 380 .28 2.8 5.3

.22 DPFF4P22J 1.700 (43.2) .700 (17.8) .700 (17.8) 1.095 (27.8) .032 (.8) 180 .28 2.8 5.8

.27 DPMF4P27K 1.250 (31.8) 1.010 (25.7) .630 (16.0) .719 (18.3) .040 (1.0) 460 .34 3.4 6.2

.27 DPFF4P27J 1.650 (43.2) .680 (17.5) .630 (16.0) 1.095 (27.8) .032 (.8) 230 .34 3.4 6.9

.33 DPFF4P33J 1.700 (43.2) .800 (20.3) .800 (20.3) 1.095 (27.8) .032 (.8) 280 .41 4.1 7.7

.39 DPFF4P39J 1.650 (43.2) .810 (20.6) .750 (19.1) 1.095 (27.8) .032 (.8) 330 .49 4.9 8.9

.47 DPFF4P47J 1.700 (43.2) .900 (22.9) .900 (22.9) 1.095 (27.8) .032 (.8) 390 .59 5.9 9.0

.0010 DPP6D1K .591 (15.0) .492 (12.5) .256 (6.5) .390 (10.0) .024 (.6) 60 .002 .016 .14

.0010 DPFF6D1J .700 (17.8) .390 (9.9) .350 (8.9) .374 (9.5) .032 (.8) 8 .001 .013 .13

.0012 DPFF6D12J .700 (17.8) .400 (10.2) .360 (9.1) .374 (9.5) .032 (.8) 10 .002 .015 .15

.0015 DPP6D15K .591 (15.0) .492 (12.5) .276 (7.0) .390 (10.0) .024 (.6) 90 .002 .024 .18

.0015 DPFF6D15J .750 (19.1) .400 (10.2) .400 (10.2) .374 (9.5) .032 (.8) 12 .002 .019 .19

.0018 DPFF6D18J .700 (17.8) .380 (9.7) .340 (8.6) .374 (9.5) .032 (.8) 14 .002 .023 .23

.0022 DPP6D22K .591 (15.0) .492 (12.5) .276 (7.0) .390 (10.0) .024 (.6) 130 .003 .035 .24

.0022 DPFF6D22J .700 (17.8) .370 (9.4) .330 (8.4) .374 (9.5) .032 (.8) 18 .003 .028 .28

.0027 DPFF6D27J .700 (17.8) .390 (9.9) .350 (8.9) .374 (9.5) .032 (.8) 22 .003 .034 .33

.0033 DPP6D33K .768 (19.5) .470 (12.0) .295 (7.5) .590 (15.0) .024 (.6) 200 .005 .052 .31

.0033 DPFF6D33J .750 (19.1) .400 (10.2) .400 (10.2) .374 (9.5) .032 (.8) 26 .004 .041 .36

.0039 DPFF6D39J .700 (17.8) .380 (9.7) .340 (8.6) .374 (9.5) .032 (.8) 31 .005 .049 .43

.0047 DPP6D47K .768 (19.5) .492 (12.5) .315 (8.0) .590 (15.0) .024 (.6) 280 .007 .074 .39

.0047 DPFF6D47J .750 (19.1) .450 (11.4) .450 (11.4) .374 (9.5) .032 (.8) 38 .006 .059 .47

.0056 DPFF6D56J .700 (17.8) .400 (10.2) .360 (9.1) .374 (9.5) .032 (.8) 45 .007 .070 .51

.0068 DPP6D68K .768 (19.5) .550 (14.0) .354 (9.0) .590 (15.0) .024 (.6) 410 .009 .110 .51

.0068 DPFF6D68J .750 (19.1) .450 (11.4) .450 (11.4) .374 (9.5) .032 (.8) 54 .006 .085 .56

.0082 DPMF6D82K .700 (17.8) .560 (14.2) .320 (8.1) .375 (9.5) .032 (.8) 62 .010 .100 .59

.0082 DPFF6D82J .900 (22.9) .380 (9.7) .340 (8.6) .374 (9.5) .032 (.8) 54 .010 .100 .68

.010 DPP6S1K 1.024 (26.0) .550 (14.0) .354 (9.0) .790 (20.0) .024 (.6) 200 .016 .160 .67

.010 DPFF6S1J .950 (24.1) .450 (11.4) .450 (11.4) .374 (9.5) .032 (.8) 66 .013 .130 .75

.012 DPFF6S12J .900 (22.9) .420 (10.7) .380 (9.7) .374 (9.5) .032 (.8) 79 .015 .150 .87

.015 DPP6S15K 1.024 (26.0) .630 (16.0) .394 (10.0) .790 (20.0) .024 (.6) 300 .024 .240 .87

.015 DPFF6S15J .950 (24.1) .500 (12.7) .500 (12.7) .374 (9.5) .032 (.8) 99 .019 .190 .98

.018 DPFF6S18J .900 (22.9) .480 (12.2) .440 (11.2) .374 (9.5) .032 (.8) 120 .023 .230 1.10

.022 DPP6S22K 1.024 (26.0) .670 (17.0) .433 (11.0) .790 (20.0) .024 (.6) 440 .035 .350 1.10

.022 DPFF6S22J .950 (24.1) .550 (14.0) .550 (14.0) .374 (9.5) .032 (.8) 150 .028 .250 1.30

.027 DPMF6S27K .950 (24.1) .690 (17.5) .410 (10.4) .375 (9.5) .032 (.8) 170 .034 .340 1.40

.027 DPFF6S27J 1.300 (33.0) .550 (14.0) .550 (14.0) .720 (18.3) .032 (.8) 76 .034 .340 1.60

.033 DPP6S33K 1.260 (32.0) .670 (17.0) .433 (11.0) .080 (27.5) .032 (.8) 220 .052 .520 1.50

.033 DPFF6S33J 1.250 (31.8) .500 (12.7) .460 (11.7) .720 (18.3) .032 (.8) 92 .041 .410 1.70

.039 DPMF6S39K .950 (24.1) .760 (19.3) .480 (12.2) .375 (9.5) .032 (.8) 250 .049 .490 1.80

.039 DPFF6S39J 1.250 (31.8) .530 (13.5) .490 (12.4) .720 (18.3) .032 (.8) 110 .049 .490 2.00



CORNELLDUBILIER



Ratings

630 Vdc (250 Vac)

400 Vdc (200 Vac)




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER




.047 DPP6S47K 1.260 (32.0) .750 (19.0) .492 (12.5) 1.080 (27.5) .032 (.8) 310 .074 .74 2.0

.047 DPFF6S47J 1.250 (31.8) .560 (14.2) .520 (13.2) .720 (18.3) .032 (.8) 130 .059 .59 2.2

.056 DPFF6S56J 1.250 (31.8) .600 (15.2) .560 (14.2) .720 (18.3) .032 (.8) 160 .070 .70 2.5

.068 DPP6S68K 1.260 (32.0) .870 (22.0) .550 (14.0) 1.080 (27.5) .032 (.8) 460 .110 1.10 2.6

.068 DPFF6S68J 1.300 (33.0) .650 (16.5) .650 (16.5) .720 (18.3) .032 (.8) 190 .085 .85 2.8

.082 DPFF6S82J 1.250 (31.8) .690 (17.5) .650 (16.5) .720 (18.3) .032 (.8) 230 .100 1.00 3.3

.10 DPP6P1K 1.260 (32.0) .866 (22.0) .512 (13.0) 1.080 (27.5) .032 (.8) 670 .160 1.60 3.0

.10 DPFF6P1J 1.300 (33.0) .750 (19.1) .750 (19.1) .720 (18.3) .032 (.8) 280 .130 1.30 3.6

.12 DPMF6P12K 1.250 (31.8) .970 (24.6) .590 (15.0) .720 (18.3) .040 (1.0) 330 .150 1.50 4.0

.12 DPFF6P12J 1.650 (41.9) .690 (17.5) .650 (16.5) 1.095 (27.8) .032 (.8) 140 .150 1.50 4.4

.15 DPFF6P15J 1.700 (43.2) .750 (19.1) .750 (19.1) 1.095 (27.8) .032 (.8) 180 .190 1.90 5.0

.18 DPFF6P18J 1.650 (41.9) .810 (20.6) .770 (19.6) 1.095 (27.8) .032 (.8) 220 .230 2.30 5.9

.22 DPFF6P22J 1.700 (43.2) .850 (21.6) .850 (21.6) 1.095 (27.8) .032 (.8) 260 .280 2.80 6.5

.0056 DPFF8D56J 1.300 (33.0) .500 (12.7) .500 (12.7) .720 (18.3) .032 (.8) 34 .016 .16 .68

.0068 DPFF8D68J 1.250 (31.8) .340 (8.6) .280 (7.1) .720 (18.3) .032 (.8) 41 .019 .19 .75

.0082 DPFF8D82J 1.250 (31.8) .370 (9.4) .310 (7.9) .720 (18.3) .032 (.8) 49 .023 .23 .82

.010 DPFF8S1J 1.300 (33.0) .500 (12.7) .500 (12.7) .720 (18.3) .032 (.8) 60 .028 .28 .91

.012 DPFF8S12J 1.300 (33.0) .550 (14.0) .550 (14.0) .720 (18.3) .032 (.8) 72 .034 .34 1.00

.015 DPFF8S15J 1.300 (33.0) .550 (14.0) .550 (14.0) .720 (18.3) .032 (.8) 90 .042 .42 1.20

.018 DPFF8S18J 1.250 (31.8) .470 (11.9) .410 (10.4) .720 (18.3) .032 (.8) 110 .051 .51 1.40

.022 DPFF8S22J 1.300 (33.0) .600 (15.2) .600 (15.2) .720 (18.3) .032 (.8) 130 .062 .62 1.50

.027 DPFF8S27J 1.250 (31.8) .530 (13.5) .470 (11.9) .720 (18.3) .032 (.8) 160 .076 .76 1.80

.033 DPFF8S33J 1.300 (33.0) .700 (17.8) .510 (13.0) .720 (18.3) .032 (.8) 200 .093 .93 2.00

.039 DPFF8S39J 1.650 (41.9) .530 (13.5) .470 (11.9) 1.095 (27.8) .032 (.8) 120 .110 1.10 2.40

.047 DPFF8S47J 1.650 (41.9) .560 (14.2) .500 (12.7) 1.095 (27.8) .032 (.8) 150 .130 1.30 2.70

.056 DPFF8S56J 1.650 (41.9) .590 (15.0) .530 (13.5) 1.095 (27.8) .032 (.8) 180 .160 1.60 3.20

.068 DPFF8S68J 1.700 (43.2) .800 (20.3) .800 (20.3) 1.095 (27.8) .032 (.8) 220 .190 1.90 3.50

.082 DPFF8S82J 1.650 (41.9) .680 (17.3) .620 (15.7) 1.095 (27.8) .032 (.8) 260 .230 2.30 4.10

.100 DPFF8P1J 1.700 (43.2) .900 (22.9) .900 (22.9) 1.095 (27.8) .032 (.8) 320 .280 2.80 4.50

.120 DPMF8P12K 1.700 (43.2) 1.010 (25.7) .620 (15.7) 1.095 (27.8) .040 (1.0) 72 .340 3.30 4.60

.0010 DPPS10D1K .984 (25.0) .511 (13.0) .314 (8.0) .826 (21.0) .032 (.8) 8.40 .003 .028 .23

.0010 DPPM10D1K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 1.90 .003 .028 .21

.0012 DPPS10D12K .984 (25.0) .511 (13.0) .314 (8.0) .826 (21.0) .032 (.8) 10.0 .003 .034 .25

.0012 DPPM10D12K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 2.30 .003 .034 .23

.0015 DPPS10D15K .984 (25.0) .511 (13.0) .314 (8.0) .826 (21.0) .032 (.8) 13.0 .004 .042 .28

.0015 DPPM10D15K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 2.90 .004 .042 .25

.0018 DPPS10D18K .984 (25.0) .511 (13.0) .314 (8.0) .826 (21.0) .032 (.8) 15.0 .005 .051 .30

.0018 DPPM10D18K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 3.40 .005 .051 .28

.0022 DPPS10D22K .984 (25.0) .551 (14.0) .334 (8.5) .826 (21.0) .032 (.8) 18.0 .006 .062 .35

.0022 DPPM10D22K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 4.20 .006 .062 .31

.0027 DPPM10D27K .984 (25.0) .472 (12.0) .275 (7.0) .826 (21.0) .032 (.8) 23.0 .008 .076 .39

.0033 DPPS10D33K .984 (25.0) .590 (15.0) .354 (9.0) .826 (21.0) .032 (.8) 5.10 .009 .093 .45

.0033 DPPM10D33K .984 (25.0) .492 (12.5) .275 (7.0) .826 (21.0) .032 (.8) 28.0 .009 .093 .39

.0039 DPPS10D39K .984 (25.0) .590 (15.0) .354 (9.0) .826 (21.0) .032 (.8) 33.0 .011 .110 .48

800 Vdc (450 Vac)

630 Vdc (250 Vac)

1000 Vdc (450 Vac)



CORNELLDUBILIER




.0039 DPPM10D39K .984 (25.0) .511 (13.0) .275 (7.0) .826 (21.0) .032 (.8) 7.4 .011 .11 .43

.0047 DPPS10D47K .984 (25.0) .629 (16.0) .374 (9.5) .826 (21.0) .032 (.8) 39.0 .013 .13 .55

.0047 DPPM10D47K .984 (25.0) .531 (13.5) .295 (7.5) .826 (21.0) .032 (.8) 8.9 .013 .13 .49

.0056 DPPSD10D56K .984 (25.0) .669 (17.0) .413 (10.5) .826 (21.0) .032 (.8) 47.0 .016 .16 .63

.0056 DPPM10D56K .984 (25.0) .551 (14.0) .314 (8.0) .826 (21.0) .032 (.8) 10.6 .016 .16 .55

.0068 DPPS10D68K .984 (25.0) .708 (18.0) .452 (11.5) .826 (21.0) .032 (.8) 57.0 .019 .19 .73

.0068 DPPM10D68K .984 (25.0) .570 (14.5) .334 (8.5) .826 (21.0) .032 (.8) 12.9 .019 .19 .62

.0082 DPPS10D82K .984 (25.0) .826 (21.0) .492 (12.5) .826 (21.0) .032 (.8) 69.0 .023 .23 .83

.0082 DPPM10D82K .984 (25.0) .826 (21.0) .334 (8.5) .826 (21.0) .032 (.8) 15.6 .023 .23 .71

.010 DPPS10S1K .984 (25.0) .826 (21.0) .511 (13.0) .826 (21.0) .032 (.8) 84.0 .028 .28 .94

.010 DPPM10S1K .984 (25.0) .826 (21.0) .374 (9.5) .826 (21.0) .032 (.8) 19.0 .028 .28 .81

.020 DPPS10S12K .984 (25.0) .826 (21.0) .511 (13.0) .826 (21.0) .032 (.8) 100.0 .034 .34 1.10

.012 DPPM10S12K .984 (25.0) .826 (21.0) .393 (10.0) .826 (21.0) .032 (.8) 23.0 .034 .34 .92

.015 DPPS10S15K 1.259 (32.0) 1.043 (26.5) .511 (13.0) 1.043 (26.5) .032 (.8) 130.0 .042 .42 1.30

.015 DPPM10S15K 1.220 (31.0) 1.043 (26.5) .374 (9.5) 1.043 (26.5) .032 (.8) 20.0 .042 .42 1.10

.018 DPPS10S18K 1.259 (32.0) 1.043 (26.5) .551 (14.0) 1.043 (26.5) .032 (.8) 150.0 .051 .51 1.50

.018 DPPM10S18K 1.220 (31.0) 1.043 (26.5) .393 (10.0) 1.043 (26.5) .032 (.8) 23.0 .051 .51 1.20

.022 DPPS10S22K 1.259 (32.0) 1.043 (26.5) .510 (15.5) 1.043 (26.5) .032 (.8) 180.0 .062 .62 1.80

.022 DPPM10S22K 1.220 (31.0) 1.043 (26.5) .433 (11.0) 1.043 (26.5) .032 (.8) 29.0 .062 .62 1.40

.027 DPPS10S27K 1.259 (32.0) 1.102 (28.0) .669 (17.0) 1.102 (28.0) .032 (.8) 230.0 .076 .76 2.00

.027 DPPM10S27K 1.220 (31.0) 1.043 (26.5) .472 (12.0) 1.043 (26.5) .032 (.8) 35.0 .076 .76 1.60

.033 DPPS10S33K 1.259 (32.0) 1.102 (28.0) .748 (19.0) 1.102 (28.0) .032 (.8) 280.0 .093 .93 2.40

.033 DPPM10S33K 1.220 (31.0) 1.043 (26.5) .511 (13.0) 1.043 (26.5) .032 (.8) 43.0 .093 .93 1.90

.039 DPPM10S39K 1.220 (31.0) 1.043 (26.5) .551 (14.0) 1.043 (26.5) .032 (.8) 51.0 .110 1.10 2.10

.047 DPPM10S47K 1.220 (31.0) 1.043 (26.5) .590 (15.0) 1.043 (26.5) .032 (.8) 61.0 .130 1.300 2.40

.0010 DPPM12D1K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 2.1 .003 .030 .21

.0012 DPPM12D12K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 2.5 .004 .036 .23

.0015 DPPM12D15K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 3.2 .004 .045 .25

.0018 DPPM12D18K .984 (25.0) .472 (12.0) .275 (7.0) .826 (21.0) .032 (.8) 3.8 .005 .054 .29

.0022 DPPM12D22K .984 (25.0) .492 (12.5) .275 (7.0) .826 (21.0) .032 (.8) 4.6 .007 .066 .32

.0027 DPFF12D27J 1.250 (31.8) .420 (10.7) .380 (9.7) .720 (18.3) .032 (.8) 18.0 .008 .081 .47

.0027 DPPM12D27K .984 (25.0) .492 (12.5) .275 (7.0) .826 (21.0) .032 (.8) 5.7 .008 .081 .36

.0033 DPFF12D33J 1.250 (31.8) .380 (9.7) .320 (8.1) .720 (18.3) .032 (.8) 22.0 .010 .098 .52

.0033 DPPM12D33K .984 (25.0) .511 (13.0) .295 (7.5) .826 (21.0) .032 (.8) 6.9 .010 .098 .41

.0039 DPFF12D39J 1.250 (31.8) .400 (10.2) .340 (8.6) .720 (18.3) .032 (.8) 27.0 .012 .12 .57

.0039 DPPM12D39K .984 (25.0) .531 (13.5) .295 (7.5) .826 (21.0) .032 (.8) 8.2 .012 .12 .56

.0047 DPFF12D47J 1.250 (31.8) .420 (10.7) .360 (9.1) .720 (18.3) .032 (.8) 32.0 .014 .14 .62

.0047 DPPM12D47K .984 (25.0) .551 (14.0) .314 (8.0) .826 (21.0) .032 (.8) 9.9 .014 .14 .50

.0056 DPFF12D56J 1.250 (31.8) .440 (11.2) .380 (9.7) .720 (18.3) .032 (.8) 38.0 .017 .17 .72

.0056 DPPM12D56K .984 (25.0) .570 (14.5) .334 (8.5) .826 (21.0) .032 (.8) 12.0 .017 .17 .57

.0068 DPFF12D68J 1.250 (31.8) .470 (11.9) .410 (10.4) .720 (18.3) .032 (.8) 46.0 .020 .20 .79

.0068 DPPM12D68K 1.220 (31.0) .590 (15.0) .314 (8.0) 1.043 (26.5) .032 (.8) 10.0 .020 .20 .68

.0082 DPFF12D82J 1.250 (31.8) .500 (12.7) .440 (11.2) .720 (18.3) .032 (.8) 56.0 .024 .24 .91

.0082 DPPM12D82K 1.220 (31.0) .610 (15.5) .334 (8.5) 1.043 (26.5) .032 (.8) 12.0 .024 .24 .77

.010 DPFF12S1J 1.250 (31.8) .530 (13.5) .470 (11.9) .720 (18.3) .032 (.8) 68.0 .030 .30 1.00

.010 DPPM12S1K 1.220 (31.0) .629 (16.0) .354 (9.0) 1.043 (26.5) .032 (.8) 15.0 .030 .30 .87

.012 DPFF12S12J 1.250 (31.8) .570 (14.5) .510 (13.0) .720 (18.3) .032 (.8) 82.0 .036 .36 1.20

.012 DPPM12S12K 1.220 (31.0) .669 (17.0) .374 (9.5) 1.043 (26.5) .032 (.8) 18.0 .036 .36 1.00

1000 Vdc (450 Vac)

1200 Vdc (475 Vac)




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER




.015 DPFF12S15J 1.300 (33.0) .650 (16.5) .650 (16.5) .720 (18.3) .032 (.8) 100 .045 .45 1.3

.015 DPPM12S15K 1.220 (31.0) .708 (18.0) .413 (10.5) 1.043 (26.5) .032 (.8) 23 .045 .45 1.1

.018 DPFF12S18J 1.650 (41.9) .560 (14.2) .500 (12.7) 1.095 (27.8) .032 (.8) 58 .054 .54 1.6

.018 DPPM12S18K 1.220 (31.0) .748 (19.0) .433 (11.0) 1.043 (26.5) .032 (.8) 27 .054 .54 1.3

.022 DPFF12S22J 1.650 (41.9) .600 (15.2) .540 (13.7) 1.095 (27.8) .032 (.8) 70 .066 .66 1.8

.022 DPPM12S22K 1.220 (31.0) .787 (20.0) .472 (12.0) 1.043 (26.5) .032 (.8) 330 .066 .66 1.5

.027 DPFF12S27J 1.650 (41.9) .650 (16.5) .590 (15.0) 1.095 (27.8) .032 (.8) 86 .081 .81 2.1

.027 DPPM12S27K 1.220 (31.0) .826 (21.0) .511 (13.0) 1.043 (26.5) .032 (.8) 41 .081 .81 1.7

.033 DPFF12S33J 1.650 (41.9) .700 (17.8) .640 (16.3) 1.095 (27.8) .032 (.8) 110 .098 .98 2.3

.033 DPPM12S33K 1.220 (31.0) .866 (22.0) .551 (14.0) 1.043 (26.5) .032 (.8) 50 .098 .98 2.0

.039 DPFF12S39J 1.700 (43.2) .850 (21.6) .850 (21.6) 1.095 (27.8) .032 (.8) 120 .120 1.20 2.7

.047 DPPM12S47J 1.650 (41.9) .800 (20.3) .740 (18.8) 1.095 (27.8) .032 (.8) 150 .140 1.40 3.0

.056 DPMF12S56K 1.700 (43.2) 1.070 (27.2) .680 (17.3) 1.095 (27.8) .040 (1.0) 42 .170 1.70 3.3

.0010 DPPS16D1K .984 (25.0) .511 (13.0) .354 (9.0) .826 (21.0) .032 (.8) 16.0 .003 .031 .23

.0010 DPPM16D1K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 3.7 .003 .031 .21

.0012 DPPS16D12K .984 (25.0) .511 (13.0) .354 (9.0) .826 (21.0) .032 (.8) 19.0 .004 .038 .26

.0012 DPPM16D12K .984 (25.0) .452 (11.5) .256 (6.5) .826 (21.0) .032 (.8) 4.4 .004 .038 .23

.0015 DPPS16D15K .984 (25.0) .511 (13.0) .354 (9.0) .826 (21.0) .032 (.8) 24.0 .005 .047 .29

.0015 DPPM16D15K .984 (25.0) .492 (12.5) .275 (7.0) .826 (21.0) .032 (.8) 5.6 .005 .047 .27

.0018 DPPS16D18K .984 (25.0) .551 (14.0) .354 (9.0) .826 (21.0) .032 (.8) 29.0 .006 .057 .32

.0018 DPFF16D18J 1.250 (31.8) .380 (9.7) .340 (8.6) .720 (18.3) .032 (.8) 21.0 .006 .057 .38

.0022 DPPS16D22K .984 (25.0) .590 (15.0) .354 (9.0) .826 (21.0) .032 (.8) 35.0 .007 .069 .36

.0022 DPFF16D22J 1.300 (33.0) .500 (12.7) .500 (12.7) .720 (18.3) .032 (.8) 26.0 .007 .069 .42

.0027 DPPS16D27K .984 (25.0) .629 (16.0) .374 (9.5) .826 (21.0) .032 (.8) 43.0 .008 .085 .42

.0027 DPFF16D27J 1.250 (31.8) .420 (10.7) .380 (9.7) .720 (18.3) .032 (.8) 31.0 .008 .085 .50

.0033 DPPS16D33K .984 (25.0) .669 (17.0) .413 (10.5) .826 (21.0) .032 (.8) 53.0 .010 .10 .48

.0033 DPFF16D33J 1.300 (33.0) .550 (14.0) .550 (14.0) .720 (18.3) .032 (.8) 38.0 .010 .10 .55

.0039 DPPS16D39K .984 (25.0) .708 (18.0) .452 (11.5) .826 (21.0) .032 (.8) 62.0 .012 .12 .55

.0039 DPFF16D39J 1.250 (31.8) .470 (11.9) .430 (10.9) .720 (18.3) .032 (.8) 45.0 .012 .12 .63

.0047 DPPS16D47K .984 (25.0) .4748 (19.0) .472 (12.0) .826 (21.0) .032 (.8) 75.0 .015 .15 .62

.0047 DPFF16D47J 1.300 (33.0) .600 (15.2) .600 (15.2) .720 (18.3) .032 (.8) 55.0 .015 .15 .69

.0056 DPPS16D56K 1.259 (32.0) .826 (21.0) .472 (12.0) 1.043 (26.5) .032 (.8) 90.0 .018 .18 .77

.0056 DPFF16D56J 1.250 (31.8) .530 (13.5) .490 (12.4) .720 (18.3) .032 (.8) 65.0 .018 .18 .79

.0068 DPPS16D68K 1.259 (32.0) .826 (21.0) .472 (12.0) 1.043 (26.5) .032 (.8) 110.0 .021 .21 .85

.0068 DPFF16D68J 1.300 (33.0) .650 (16.5) .650 (16.5) .720 (18.3) .032 (.8) 79.0 .021 .21 .87

.0082 DPPS16D82K 1.259 (32.0) .866 (22.0) .511 (13.0) 1.043 (26.5) .032 (.8) 130.0 .026 .26 .97

.0082 DPFF16D82J 1.250 (31.8) .600 (15.2) .560 (14.2) .720 (18.3) .032 (.8) 95.0 .026 .26 1.00

.010 DPPS16S1K 1.259 (32.0) .905 (23.0) .590 (15.0) 1.043 (26.5) .032 (.8) 160.0 .031 .31 1.14

.010 DPFF16S1J 1.300 (33.0) .700 (17.8) .700 (17.8) .720 (18.3) .032 (.8) 120.0 .031 .31 1.10

.012 DPPS16S12K 1.259 (32.0) .944 (24.0) .629 (16.0) 1.043 (26.5) .032 (.8) 190.0 .038 .38 1.30

.012 DPFF16S12J 1.650 (41.9) .580 (14.7) .540 (13.7) 1.095 (27.8) .032 (.8) 72.0 .038 .38 1.40

.015 DPPS16S15K 1.259 (32.0) 1.023 (26.0) .708 (18.0) 1.043 (26.5) .032 (.8) 240.0 .047 .47 1.50

.015 DPFF16S15J 1.700 (43.2) .750 (19.1) .750 (19.1) 1.095 (27.8) .032 (.8) 90.0 .047 .47 1.60

.018 DPPS16S18K 1.299 (33.0) 1.102 (28.0) .787 (20.0) 1.102 (28.0) .032 (.8) 220.0 .057 .57 1.80

.018 DPFF16S18J 1.650 (41.9) .670 (17.0) .630 (18.0) 1.095 (27.8) .032 (.8) 110.0 .057 .57 1.90

.022 DPPS16S22K 1.299 (33.0) 1.181 (30.0) .787 (20.0) 1.102 (28.0) .032 (.8) 260.0 .069 .69 2.00

.022 DPFF16S22J 1.650 (41.9) .730 (18.5) .690 (17.5) 1.095 (27.8) .032 (.8) 130.0 .069 .69 2.10

.027 DPFF16S27J 1.650 (41.9) .780 (19.8) .740 (18.8) 1.095 (27.8) .032 (.8) 160.0 .085 .85 2.40

.033 DPFF16S33J 1.700 (43.2) .950 (24.1) .950 (24.1) 1.095 (27.8) .950 (24.1) 200.0 .104 1.00 2.70

1200 Vdc (475 Vac)

1600 Vdc (500 Vac)


CORNELLDUBILIER




.001 DPPS20D1K .984 (25.0) .590 (15.0) .393 (10.0) .826 (21.0) .032 (.8) 17.0 .003 .031 .25

.001 DPPM20D1K .984 (25.0) .492 (12.5) .275 (7.0) .826 (21.0) .032 (.8) 3.9 .003 .031 .22

.0012 DPPS20D12K .984 (25.0) .590 (15.0) .393 (10.0) .826 (21.0) .032 (.8) 20.0 .004 .038 .28

.0012 DPPM20D12K .984 (25.0) .511 (13.0) .295 (7.5) .826 (21.0) .032 (.8) 4.7 .004 .038 .24

.0015 DPPS20D15K .984 (25.0) .590 (15.0) .393 (10.0) .826 (21.0) .032 (.8) 25.0 .005 .047 .31

.0015 DPPM20D15K .984 (25.0) .551 (14.0) .314 (8.0) .826 (21.0) .032 (.8) 5.9 .005 .047 .29

.0018 DPPS20D18K .984 (25.0) .629 (16.0) .433 (11.0) .826 (21.0) .032 (.8) 30.0 .006 .057 .35

.0018 DPPM20D18K .984 (25.0) .610 (15.5) .334 (8.5) .826 (21.0) .032 (.8) 7.0 .006 .057 .33

.0022 DPPS20D22K .984 (25.0) .669 (17.0) .472 (12.0) .826 (21.0) .032 (.8) 37.0 .007 .069 .41

.0022 DPPM20D22K .984 (25.0) .629 (16.0) .354 (9.0) .826 (21.0) .032 (.8) 8.3 .007 .069 .37

.0027 DPPS20D27K .984 (25.0) .708 (18.0) .511 (13.0) .826 (21.0) .032 (.8) 45.0 .008 .085 .47

.0027 DPPM20D27K .984 (25.0) .649 (16.5) .374 (9.5) .826 (21.0) .032 (.8) 11.0 .008 .085 .42

.0033 DPPS20D33K .984 (25.0) .787 (20.0) .551 (14.0) .826 (21.0) .032 (.8) 55.0 .010 .10 .55

.0033 DPPM20D33K .984 (25.0) .688 (17.5) .413 (10.5) .826 (21.0) .032 (.8) 13.0 .010 .10 .49

.0039 DPPS20D39K .984 (25.0) .866 (22.0) .590 (15.0) .826 (21.0) .032 (.8) 66.0 .012 .12 .63

.0039 DPPM20D39K .984 (25.0) .748 (19.0) .433 (11.0) .826 (21.0) .032 (.8) 15.0 .012 .12 .55

.0047 DPPS20D47K 1.259 (32.0) .866 (22.0) .551 (14.0) 1.043 (26.5) .032 (.8) 79.0 .015 .15 .75

.0047 DPPM20D47K 1.220 (31.0) .748 (19.0) .393 (10.0) 1.043 (26.5) .032 (.8) 14.0 .015 .15 .65

.0056 DPPS20D56K 1.259 (32.0) .905 (23.0) .590 (15.0) 1.043 (26.5) .032 (.8) 94.0 .018 .18 .85

.0056 DPPM20D56K 1.220 (31.0) .767 (19.5) .433 (11.0) 1.043 (26.5) .032 (.8) 16.0 .018 .18 .73

.0068 DPPS20D68K 1.259 (32.0) .944 (24.0) .629 (16.0) 1.043 (26.5) .032 (.8) 110.0 .021 .21 .96

.0068 DPPM20D68K 1.220 (31.0) .807 (20.5) .472 (12.0) 1.043 (26.5) .032 (.8) 20.0 .021 .21 .84

.0082 DPPS20D82K 1.259 (32.0) .984 (25.0) .669 (17.0) 1.043 (26.5) .032 (.8) 140.0 .026 .26 1.10

.0082 DPPM20D82K 1.220 (31.0) .846 (21.5) .511 (13.0) 1.043 (26.5) .032 (.8) 240 .026 .26 .95

.01 DPPS20S1K 1.259 (32.0) 1.023 (26.0) .708 (18.0) 1.043 (26.5) .032 (.8) 170.0 .031 .31 1.20

.01 DPPM20S1K 1.220 (31.0) .866 (22.0) .551 (14.0) 1.043 (26.5) .032 (.8) 29.0 .031 .31 1.10

.012 DPPS20S12K 1.299 (33.0) 1.122 (28.5) .787 (20.0) 1.102 (28.0) .032 (.8) 150.0 .038 .38 1.50

.012 DPPM20S12K 1.220 (31.0) .925 (23.5) .570 (14.5) 1.043 (26.5) .032 (.8) 35.0 .038 .38 1.20

.015 DPPS20S15K 1.299 (33.0) 1.220 (31.0) .826 (21.0) 1.102 (28.0) .032 (.8) 190.0 .047 .47 1.70

.015 DPPM20S15K 1.220 (31.0) .964 (24.5) .629 (16.0) 1.043 (26.5) .032 (.8) 44.0 .047 .47 1.40

2000 Vdc (500 Vac)





Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Specifications, Pulse and High-Frequency Polypropylene Capacitors

Capacitance is within tolerance whenmeasured at 1 kHz, 25°C. Standard (K)tolerance is ±10% unless specified other-wise.

Operating Temperature Range:Polypropylene capacitors may be operatedat full rated voltage from -55°C to +85°C.Above 85°C derate linearly to 50% ratedvoltage at 105°C. Under no circumstancesshould polypropylene capacitors be used at anambient temperature exceeding 105°C.

Insulation Resistance:Insulation resistance is no less than thelesser of the RC product or the R specifiedin the following table. IR is measured after2 minutes at 100 VDC and 25±5°C:

Type Minimum IR Minimum RC940C Not Specified 100,000 MxF941C Not Specified 100,000 MxF942C Not Specified 100,000 MxF943C Not Specified 100,000 MxFDPP 100,000 Mmin 50,000 MxFDPPS 400,000 Mmin 200,000 MxFDPFF 200,000 Mmin Not SpecifiedDPPM 400,000 Mmin Not SpecifiedDPMF 200,000 Mmin Not SpecifiedSCD Not Specified 100,000 MxFSCM* Not Specified 100,000 MxFSCC* Not Specified 100,000 MxF

*Applies to capacitor only. See data tables fordiode specifications.

Rated DC Voltage is the maximum con-tinuous voltage that may be applied at themaximum rated operating temperature.

AC Voltage and Pulse Rating:Keep voltage peaks to less than the ratedDC voltage and AC voltage to less than therated rms volts. Limit the current peaks tothe rated peak.

For high-frequency operation, the maximumrms current rating ensures that the capacitor’scase temperature rise does not exceed15°C.

To calculate the maximum rms voltage andcurrent that would result in a 15°C heat rise,the following equations may be used.

For Round CasesVrms = 2300 [D(.5D+L)/fC(df)].5

Irms = .0144[fCD(.5D+L)/df].5

For Oval and Rectangular CasesVrms = 1800 [(TH+TL+HL)/fC(df)].5

Irms = .0115[fC(TH+TL+HL)/(df)].5

Where D,T,H, and L are dimensions in theratings tables, f is frequency in Hz and C isnominal capacitance in µF. (df) is dissipationfactor in percent from the df vs Frequencycurve on page 5.023.

Under no circumstances should the applied rmsvoltage exceed the rated rms voltage otherwisecorona inception may occur. Also, rms currentmust not exceed rated rms current of the leads.

Maximum Allowable RMS Lead Current

Cap Lead IrmsType Dia. Max.

DPP .024” 2.0 A.032” 3.0 A

DPFFDPPS .032” 9.0 ADPMF .040” 15.0 ADPPM .047” 23.0 A940C-943C

SCD – 50 ASCM – 50 ASCC – 50 A

Specifications and Application Guide



CORNELLDUBILIER


Specifications, Pulse and High-Frequency Polypropylene Capacitors

Typical Characteristics

Capacitance Change vs. Temperature Dissipation Factor vs. Temperature

Insulation Resistance vs. Temperature Dissipation Factor vs. Frequency

4

2

0

-2

-4

-6% C

apac

itanc

e C

hang

e

-55° -25° 0° 25° 50° 75° 100°

.020

0.15

0.10

0.05

0

% D

issi

patio

n Fa

ctor

-55° -25° 0° 25° 50° 75° 100°

1.0

0.5

% D

issi

patio

n Fa

ctor

0.5 kHz 1 kHz 10 kHz 100 kHz

1,000,000500,000

100,00050,000

10,0005,000

1,000500

100

25° 45° 65° 85° 105°

MΩ

x µF

Frequency

Degrees Centigrade Degrees Centigrade

Degrees Centigrade




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Pulse and High-Frequency, Radial-Leaded Mica Capacitors

Specifications Up to 9.0 amps continuous current Up to 3,700 amps peak current Up to 1,500 Vdc, 400 Vac 100,000 V/µs capability minimum Quiet—no piezoelectric buzzing No capacitance change with voltage,

temperature or frequency -55°C to +125°C at rated voltage Silvered mica dielectric

Ratings

Types CD16, CD30, CDV16,CDV19, CDV30 Mica CapacitorsHighlightsWith 75% lower impedance at resonance than ceram-ic disks and twice the dV/dt capability of our bestpolypropylene film/foil capacitors, CDE mica caps arethe choice for snubber and resonant power applica-tions. They’re quiet, too: there’s no piezoelectric buzzlike with high K ceramic capacitors. While the industrystandard IEC test procedure permits 3% capacitancechange after 10,000 dV/dt pulses, CDE mica capsshow no change after a million shots.

Cap. Catalog Dimensions (in.) Ipk Irms, 85°CpF Number L H T S d Amps 100 kHz 250 kHz 500 kHz 1 MHz 2.5 MHz 5 MHz

100 CD16FD101J03 .43 .46 .15 .23 .032 20 .019 .047 .09 .19 .47 .78120 CD16FD121J03 .43 .46 .15 .23 .032 24 .023 .057 .11 .23 .57 .86150 CD16FD151J03 .43 .46 .15 .23 .032 30 .028 .071 .14 .28 .71 .96180 CD16FD181J03 .43 .46 .15 .23 .032 36 .034 .085 .17 .34 .85 1.10220 CD16FD221J03 .43 .46 .15 .23 .032 44 .041 .100 .21 .41 1.00 1.20270 CD16FD271J03 .45 .47 .16 .23 .032 54 .051 .130 .25 .51 1.30 1.30330 CD16FD331J03 .45 .47 .16 .23 .032 66 .062 .160 .31 .62 1.50 1.50390 CD16FD391J03 .45 .47 .16 .23 .032 78 .074 .180 .37 .74 1.60 1.60470 CD16FD471J03 .45 .47 .16 .23 .032 94 .089 .220 .44 .89 1.80 1.80560 CD16FD561J03 .46 .50 .18 .23 .032 110 .110 .260 .53 1.10 2.00 2.00680 CD16FD681J03 .46 .50 .18 .23 .032 130 .130 .320 .64 1.30 2.30 2.30820 CD16FD821J03 .46 .50 .18 .23 .032 160 .150 .390 .77 1.50 2.50 2.50

1000 CD16FD102J03 .46 .50 .18 .23 .032 200 .190 .470 .94 1.90 2.70 2.701200 CD16FD122J03 .46 .50 .18 .23 .032 240 .230 .570 1.10 2.30 3.00 3.001500 CD16FD152J03 .46 .50 .18 .23 .032 300 .280 .710 1.40 2.70 3.30 3.301800 CD16FD182J03 .47 .52 .25 .23 .032 360 .340 .850 1.70 3.40 4.10 4.102200 CD16FD222J03 .47 .52 .25 .23 .032 440 .410 1.000 2.10 4.10 4.50 4.502700 CD16FD272J03 .47 .52 .25 .23 .032 540 .510 1.300 2.50 5.00 5.00 5.003000 CD16FD302J03 .47 .52 .25 .23 .032 600 .570 1.400 2.80 5.20 5.20 5.20

LMax.


.078” Max.No solder

H Max.

S±.031”

Copper-cladsteel leads

Type AWGCD16 20CD30 18CDV16 20CDV19 20CDV30 181.00”

Min.

d

TMax.

500 Vdc (300 Vac)



CORNELLDUBILIER



RatingsCap. Catalog Dimensions (in.) Ipk Irms, 85°CpF Number L H T S d Amps 100 kHz 250 kHz 500 kHz 1 MHz 2.5 MHz 5 MHz

3300 CD16FD332J03 .48 .54 .28 .23 .032 600 .57 1.40 2.80 5.70 6.80 6.803600 CD16FD362J03 .48 .54 .28 .23 .032 720 .68 1.70 3.40 6.80 7.10 7.103900 CD16FD392J03 .48 .54 .28 .23 .032 780 .74 1.80 3.70 7.40 7.40 7.404300 CD16FD432J03 .48 .54 .28 .23 .032 860 .81 2.00 4.00 7.00 7.80 7.804700 CD16FD472J03 .49 .56 .31 .23 .032 940 .89 2.20 4.40 8.50 8.50 8.505600 CD16FD562J03 .49 .56 .33 .23 .032 1100 1.10 2.60 5.30 9.00 9.00 9.006800 CD16FD682J03 .50 .58 .38 .23 .032 1300 1.30 3.20 6.40 9.00 9.00 9.007500 CD16FD752J03 .50 .58 .40 .23 .032 1500 1.40 3.50 7.10 9.00 9.00 9.008200 CD30FD822J03 .79 .88 .32 .43 .040 1200 1.50 3.80 5.40 7.70 7.70 7.70

10000 CD30FD103J03 .80 .89 .34 .43 .040 1500 1.90 4.20 6.00 8.50 8.50 8.50

100 CDV16FF101J03 .43 .46 .15 .23 .032 23 .022 .055 .11 .22 .55 .92150 CDV16FF151J03 .43 .46 .15 .23 .032 34 .033 .082 .16 .33 .82 1.10220 CDV16FF221J03 .43 .46 .15 .23 .032 50 .048 .120 .24 .48 1.20 1.40330 CDV16FF331J03 .45 .47 .16 .23 .032 74 .073 .180 .36 .73 1.80 1.80470 CDV16FF471J03 .45 .47 .16 .23 .032 100 .100 .260 .52 1.00 2.10 2.10680 CDV16FF681J03 .46 .50 .18 .23 .032 150 .150 .370 .75 1.50 2.70 2.70

1000 CDV16FF102J03 .46 .50 .18 .23 .032 220 .220 .550 1.10 2.20 3.20 3.201500 CDV16FF152J03 .46 .50 .18 .23 .032 330 .330 .820 1.60 3.30 3.90 3.902200 CDV16FF222J03 .47 .52 .25 .23 032 600 .480 1.20 2.40 4.80 5.30 5.303000 CDV16FF302J03 .47 .52 .25 .23 .032 825 .660 1.60 3.30 6.20 6.20 6.203300 CDV19FF332J03 .72 .59 .38 .34 .032 7004700 CDV19FF472J03 .76 .63 .46 .34 .032 10006800 CDV30FF682J03 .80 .89 .36 .44 .040 21008200 CDV30FF822J03 .81 .90 .39 .44 .040 2500

10000 CDV30FF103J03 .82 .91 .42 .44 .040 3000

100 CDV30FH101J03 .77 .85 .25 .43 .040 46150 CDV30FH151J03 .77 .85 .25 .43 .040 68220 CDV30FH221J03 .77 .85 .25 .43 .040 100330 CDV30FH331J03 .77 .85 .25 .43 .040 150470 CDV30FH471J03 .77 .85 .25 .43 .040 210680 CDV30FH681J03 .77 .85 .25 .43 .040 310

1000 CDV30FH102J03 .77 .86 .26 .43 .040 4601500 CDV30FH152J03 .78 .87 .28 .43 .040 6802200 CDV30FH222J03 .79 .88 .31 .43 .040 10003300 CDV30FH332J03 .80 .89 .35 .43 .040 15004700 CDV30FH472J03 .81 .90 .38 .43 .040 21006800 CDV30FH682J03 .83 .92 .42 .43 .040 31008200 CDV30FH822J03 .84 .93 .46 .43 .040 3700

500 Vdc (300 Vac)

1000 Vdc (350 Vac)

1500 Vdc (400 Vac)




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER




Capacitance Tolerance: ±5% is standard.Capacitance is within tolerance when measured atthese frequencies:

1 - 1000 pF @ 1 MHz>1000 pF @ 1 kHz

Dissipation Factor is equal to DF=2πfRC, where fis the test frequency, R is the equivalent seriesresistance, and C is the capacitance. Limits are:

Capacitance Dissipation Factor100-1000 pF 0.00075 max at 1 MHz1200-3300 pF 0.0014 max at 1 kHz3900-9100 pF 0.0013 max at 1 kHz10,000 pF 0.0012 max at 1 kHz

Quality Factor Q is the reciprocal of dissipationfactor.

Insulation Resistance is no less than 100 GΩ at25°C and 10 GΩ at 125°C.

Pulse Capability: The brass clips used in SnubberMike capacitors allow them to endure huge transientcurrents. All are capable of withstanding an unlimit-ed number of pulses with a dV/dt of 100,000 V/µstested per IEC 384-1. dV/dt ratings are:

The peak current rating in amps is the rated capaci-tance in µF times the dV/dt rating:

Ipk = C(dV/dt)

TypesCD16 CD30

Rated CDV16 CDV19 CDV30Volts dV/dt maximum, V/µs

500 275000 1520001000 275000 213000 3030001500 455000

Voltage Coefficient: The change in capacitancefrom 0 volts to rated voltage is less than 0.1%.

Temperature Coefficient and CapacitanceDrift: Measure capacitance at 25°C, -55°C, 25°C,125°C and at 25°C after stabilizing at each tem-perature. The temperature coefficient will be 35±35 ppm/°C and the capacitance will be the initialvalue ±(.05%+.1 pF).

Marking: Per EIA RS153 B and includes CDE’sname, nominal capacitance in pF, capacitancetolerance, and DC working voltage if other than500 V.

Solderability: After an 8-hour steam aging, coatleads with rosin flux (R) and immerse in molten245°C ±5%C 60/40 tin lead solder. Solder cover-age will be no less than 95% when examined at10X magnification.

Life Test: Subject the capacitors to maximumoperating temperature (+125°C or +150°C) with1.5 times rated voltage applied for 2000 hours.There will be no visual damage and the capaci-tors will meet these after-test limits:

Withstanding voltage and insulation resistanceinitial requirements;

capacitance change ±1% maximum; and,

DF 150% initial limit maximum.

Moisture Resistance: Capacitors will meet therequirements of MIL-STD-202, Method 106F asoutlined here and diagrammed below. Refer toMIL-STD-202 for details.

1. Dry capacitors for 24 hours in a 50±2°C ovenand then allow to stabilize at room temperature.

2. Subject the capacitors to ten 24-hour continuouscycles with relative humidity and temperature asshown.

3. 24 hours after completion of the last cycle thecapacitors will show no visual damage and willmeet these after-test limits:

Withstanding voltage initial requirement;

insulation resistance 30 GΩ minimum;

capacitance change ±1% maximum; and,

DF 150% initial limit maximum.



CORNELLDUBILIER







Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER


Type SNU, Oil-Filled, Metallic Oval Case Snubber Capacitors

Type SNU capacitors have low inductance and high peakcurrent ratings making them ideal for power snubberapplications. Use Type SNU to reduce voltage transientsacross semiconductor devices such as SCRs.

Highlights Voltage ratings: 1000 Vpk, 2000 Vpk Capacitance range: 0.05µF to 2.0µF Capacitance tolerance: ±10% Operating temperature range: -40°C to 85°C Dissipation factor: .3% maximum Internally protected (not UL recognized) Series inductance: 0.10 microhenries maximum Aluminum case (tinplate steel may be substituted for aluminum)

Type SNU for SnubberApplicationsFilm/Paper/Extended Foil

End Mount30434

(2 required)

32107-1

Mounting Hardware

30393-5

.50 MAX.

.81" ±

.06

1.31"± .06"

H + .12" - .06"

2.16" ± .06"

Cap. Stock Catalog Case Height (H) AmpsµF Items Number Code (inches) RMS 55°C

1000 Vpk

0.10 S SNU102K104R A 2.13 30.25 S SNU102K254R A 2.13 40.50 S SNU102K504R A 2.13 61.00 S SNU102K105R A 2.13 72.00 S SNU102K205R A 3.13 11

2000 Vpk

0.05 S SNU202K503R A 2.13 20.10 S SNU202K104R A 2.13 30.25 S SNU202K254R A 2.13 40.50 S SNU202K504R A 2.88 71.00 S SNU202K105R A 4.50 12

Wrap Around

Universal

Side Mount31762

(2 required)

6-32 screwand nut

Case Height End Mount Side Mount2.13 30434-33 31762-452.88 30434-45 31762-483.13 30434-49 31762-494.50 30434-71 31762-53



CORNELLDUBILIER


Application Guide, Snubber Capacitors

Snubbers are any of several simple energy-absorbing circuits used to eliminate voltage spikescaused by circuit inductance when a switch—either mechanical or semi-conductor—opens. Theobject of the snubber is to eliminate the voltagetransient and ringing that occurs when the switchopens by providing an alternate path for the cur-rent flowing through the circuit’s intrinsic leakageinductance. Snubbers in switchmode power sup-plies provide one or more of these three valuablefunctions:

Shape the load line of a bipolar switching tran-sistor to keep it in its safe operating area.

Remove energy from a switching transistor anddissipate the energy in a resistor to reducejunction temperature.

Reduce ringing to limit the peak voltage on aswitching transistor or rectifying diode and toreduce EMI by reducing emissions and lower-ing their frequency.

The most popular snubber circuit is a capacitorand a series resistor connected across a switch.Here’s how to design that ubiquitous RC Snubber:

Component Selection: Choose a resistor that’snoninductive. A good choice is a carbon composi-tion resistor. A carbon film resistor is satisfactoryunless it’s trimmed to value with a spiral abrasionpattern. Avoid wirewound because it is inductive.

Choose a capacitor from this datasheet to with-stand the stratospherically high peak currents insnubbers. For capacitance values up to 0.01 µF,look first at Snubber Mike dipped mica capacitors.For higher capacitance values, look at the TypeDPP radial-leaded polypropylene, film/foil capaci-tors. Axial-leaded Type WPP is as good except forthe higher inductance intrinsic to axial-leadeddevices.

The highest Type DPP rated voltage is 630 Vdcand the highest Type WPP voltage is 1000 Vdc.For higher voltages and capacitances, stay withpolypropylene film/foil capacitors, choosing thecase size you prefer from Types DPFF and DPPSselections. For the smallest case size, chooseType DPPM or DPMF, but realize that these typesinclude floating, metallized film as common foils toachieve small size. The use of metallized filmreduces the peak current capability to from a thirdto a fifth of the other high-voltage choices.

The selection process is easy in this datasheet—peak current and rms current capability is providedwith the capacitance ratings. The peak currentcapability is the dV/dt capability times the nominalcapacitance. The rms current capability is thelower of the current which causes the capacitor toheat up 15°C or the current which causes thecapacitor to reach its AC voltage.

We’ve included dV/dt capability tables to allow youto compare CDE snubber capacitors to otherbrands. Snubber Mikes can withstand dV/dts ofmore than 100,000 V/µs for all ratings and TypeDPPs can withstand more than 2000 V/µs. Forhigh-voltage snubbers, Types DPFF and DPPShandle more than 3000 V/µs, and Types DPMFand DPPM, more than 1000 V/µs. See the table forvalues according to case length.

Assuming that the source impedance is negligi-ble—the worst case assumption— the peak cur-rent for your RC Snubber is:

Ipk = Vo

Rs

And the peak dV/dt is:

dV/dtpk = Vo

RsCs

While for a sinewave excitation voltage, rms cur-rent in amps is the familiar:

Irms = 2πfCVrms x 106

For a squarewave you can approximate rms andpeak current as:

Irms = CVpp

.64 q tT

and

Ipeak = CVpp

.64t

Other Capacitor Types: Here’s a last word oncapacitor choice to help you venture out on yourown into the uncharted territory of capacitors notspecified for use in snubbers and not in this

Vo = open circuit voltageRs = snubber resistanceCs = snubber capacitance

f = frequency in HzC = capacitance in µFV = voltage in Vrms

Vpp = peak-peak voltst = pulse width in µsT = pulse period in µs

Designing an RC Snubber




Pulse

, Hi-F

requ

ency

& Sn

ubbe

rCa

pacit

ors

CORNELLDUBILIER



datasheet. Realize that metallized film types andhigh-K ceramic types have limited peak-currentand transient withstanding capability, on the orderof 50 to 200 V/µs. Polyester has 15 times the lossof polypropylene and is fit only for low rms cur-rents or duty cycles. And, be sure to take voltageand temperature coefficients into account. While aSnubber Mike’s or a Type DPP’s capacitance isnearly independent of voltage and temperature, bycomparison, a high-K ceramic dielectric like Y5Vcan lose 3 of its capacitance from room tempera-ture to 50°C (122°F) and lose another 3 from zerovolts to 50% rated voltage.

Quick Snubber Design: Where power dissipationis not critical, there is a quick way to design asnubber. Plan on using a 2-watt carbon composi-tion resistor. Choose the resistor value so that thesame current can continue to flow without voltageovershoot after the switch opens and the currentis diverted into the snubber. Measure or calculatethe voltage across the switch after it opens andthe current through it at the instant before theswitch opens. For the current to flow through theresistor without requiring a voltage overshoot,Ohm’s Law says the resistance must be:

R # Vo

I

The resistor’s power dissipation is independent ofthe resistance R because the resistor dissipatesthe energy stored in the snubber capacitor,2CsVo

2, for each voltage transition regardless ofthe resistance. Choose the capacitance to causethe 2-watt resistor to dissipate half of its power rat-ing, one watt. For two times fs transitions per sec-ond, the resistor will dissipate one watt when:

1 = (2CsVo2)(2fs) fs = switching frequency

Cs = 1

Vo2fs

As an illustration, suppose that you have designeda switchmode converter and you want to snub oneof the transistor switches. The switching frequencyis 50 kHz and the open-switch voltage is 160 Vdcwith a maximum switch current of 5A. The resistorvalue must be:

R # 160/5 = 32 Ωand the capacitance value is:

Cs = 1 = 780pF

(160)2(50 x 103)

Optimum Snubber Design: For optimum snubberdesign using the AC characteristics of your circuit,first determine the circuit’s intrinsic capacitanceand inductance. Suppose you were designing asnubber for the same transistor switch as in the“Quick” example. Then on a scope note the ringingfrequency of the voltage transient when the transis-tor turns off. Next, starting with a 100 pF SnubberMike capacitor, increase the capacitance acrossthe transistor in steps until the ringing frequency ishalf of the starting frequency. The capacitance youhave added in parallel with the transistor’s intrinsiccapacitance has now increased the total capaci-tance by a factor of four as the ringing frequency isinversely proportionalto the square root of the circuit’s inductance-capacitance product:

fo = 1

2πq LC

So, the transistor’s intrinsic capacitance, Ci, is aof the added capacitance, and the circuit induc-tance, the the above equation, is:

Li = 1

Ci(2πfi)2

When the transistor switch opens, the snubbercapacitor looks like a short to the voltage change,and only the snubber resistor is in the circuit.Choose a resistor value no larger than the charac-teristic impedance of the circuit so that the induc-tive current to be snubbed can continueunchanged without a voltage transient when theswitch opens:

R = q Li /Ci

You may need to choose an even smaller resis-tance to reduce voltage overshoot. The rightresistance can be as little as half the characteristicimpedance for better sampling of the Intrinsic LCcircuit.

The power dissipated in the resistor is the energyin the capacitance, 2CsVo

2, times the switching

Vo = off voltageI = on current fi = initial ringing frequency

Ci = intrinsic capacitance(added capacitance) /3

Li = intrinsic inductance



CORNELLDUBILIER



frequency, fs, times the number of voltage transi-tions per cycle. For example, if your circuit is ahalf-bridge converter, there are two voltage transi-tions per cycle and the power in the resistor is:

Pr = CsVo2fs

Choose a snubber capacitance value which meetstwo requirements:

1) It can provide a final energy storage greaterthan the energy in the circuit inductance

2CsVo2 > 2LiI2 I = closed-circuit

Cs > LII2

Vo2

and,

2) it produces a time constant with the snubberresistor that is small compared to the shortestexpected on-time for the transistor switch.

RCs < ton/10

Cs < ton/10R

Choosing a capacitance near the low end of therange reduces power dissipated in the resistor,and choosing a capacitance 8 to 10 times theintrinsic capacitance, Ci, almost suppresses thevoltage overshoot at switch turn off. Try a capaci-tance at the low end of the range as the initialvalue and increase it later if needed.

Now revisit the “Quick” example with the addeddata permitting “Optimum” design. You’ve takensome more measurements on your switchmodeconverter: the ringing frequency of the voltagetransient when the transistor switch opens is 44MHz and an added parallel capacitance of 200 pFreduces the ringing frequency to 22 MHz. Theswitching frequency is 50 kHz with a 10% mini-mum duty cycle, and the open-switch voltage is160 Vdc with a maximum switch current of 5A. Soyou know the following:

fi = 44 MHzCi = 200/3 = 67 pFfs = 50 kHzton = 0.1/(50 x 103) = 2µsVo = 160 VdcI = 5A

And calculate the circuit inductance:

Li = 1 = 0.196µH(67 x 10-12)(2π44 x 106)2

And the snubber resistor value:

R = q 0.196/67 (10-3) = 54ΩBefore you can calculate the resistor power dissi-pation, you must first choose the snubber capaci-tance:

LiI2 < Cs < ton

Vo2 10R

(0.196 x 10-6)(5)2 < Cs < 2 x 10-6

(160)2 (10)(54)

192 < Cs < 3700 pF

Since power dissipation in the resistor is propor-tional to the capacitance, choose a standardcapacitance value near the low end of the aboverange. For a 220 pF capacitor and two transitionsper cycle, the power dissipation in the resistor is:

Pr = (220 x 10-12)(160)2(50 x 103) = 0.2 W

Comparing the “Quick” design to the “Optimum”design, you see that for the same converter switchthe required snubber resistor’s power capabilitywas reduced by a factor of 5, from 1 W to 0.2 W,and the snubber capacitance was reduced by afactor of 3.5, from 780 pF to 220 pF. This waspossible because the additional circuit measure-ments revealed that the source impedance wasactually 54 Ω rather than 32 Ω, and that the circuitinductance permitted a smaller capacitance toswallow the circuit’s energy.

Usually the “Quick” method is completely ade-quate for final design. Start with the “Quick”approach to prove your circuit breadboard, and goon to the “Optimum” approach only if power effi-ciency and size constraints dictate the need foroptimum design.

NOTE: For more on RC snubber design, for RCD snubberdesign, and for snubber design using IGBT snubbermodules, get the application note, “Design of Snubbers forPower Circuits,” at www.cornell-dubilier.com/pdfframe.htm.

Cs = snubber capacitanceVo = off voltagefs = switching frequency

High-Voltageand

Motor Capacitors

Motor-Run,Motor-Start

andHigh Voltage DC

Capacitors


Selector Guide, Motor-Run, Motor-Start and High Voltage DC Capacitors

CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Motor Run &Power Supply Motor Start DC/AC-rated Commutating DC-rated

Capacitors Capacitors Capacitors Capacitors Capacitors

KKSM,KTSM,KBSMSCRType SMP,SMS,SMT,PD ETW OTB T

Metallized polypropylene Non Polarized Paper-Film/Foil Paper-Film/Foil Paper-Film/FoilSelf healing, Protected, Aluminum Electrolytic Oil filled, protected Oil filled, Metal case Oil filled

Oil filled, Metal casePD Dry Plastic case

phenolic case Metal case Low inductance Metal case

Motor RunApplication Power Supplies Motor Start Filters SCR Commutation Filters

HID Lighting Blocking BlockingAir Conditioning Power Supplies Power Supplies

Ballasts General Purpose AC Motor Controls

Voltage Range 240 to 660 Vac 125 to 330 Vac 400 Vdc/236 Vac 200 Vpk to 2000 Vpk 600 Vdc to 5000 Vdcto

3,000 Vdc/950 Vac

Capacitance Range 0.5 µF to 120 µF 21 µF to 1200 µF 0.1 µF to 35 µF 0.05 µF to 50 µF 0.1 µF to 15 µF

Rated Temperature -40°C to +70°C -40°C to 65°C -55°C to 85°C -40°C to 85°C -55°C to 85°C(Operating) -40°C to +90°C Avail.

Dissipation Factor 0.1% N/A 1.0% 0.3% 1.0%

(Maximum)Service Life Objective 94% / 60,000 hours 50,000 starts 40,000 hours 95% / 40,000 hours 40,000 hours

(Rated Conditions)

Agency Approvals UL 810 and CSA UL 810 and CSA for protection for protection

Applicable EIA-456-

UL 810EIA 463 UL 810/CSA

ARS-401 (Type SCR) N/A

Standards

Page 6.002 6.008 6.011 6.013 6.016




CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

Type PD, Leak-Free Motor Run and Power Supply Capacitors


CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Type PD, Leak-Free Motor Run and Power Supply Capacitors




Type SM Motor-Run and Power Supply Capacitors

CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

Highlights• Voltage range: 240 to 660 Vac• Capacitance range: .5 to 120 µF• Temperature range: -40°C to 70°C, 90°C avail.• Capacitance tolerance: ±10% standard tolerance;

±3% available.• Self healing• Fault Current Protection up to 10,000 amps AFC• Low energy consumption. Dissipation factor

<0.1%• 2- tine, 1/4" quick connect lug terminals are

standard (4 bladed available)• Meet requirements of EIA 456A• UL recognized file No. E56959• CSA certified file No. LR075387/LR700632

Service Life ObjectiveThe service life objective for this series is 60,000hours of operating life with a 94% survival rate whenoperated at full voltage, 60 Hz, and rated ambienttemperature. AC capacitors are frequently used atvoltages and ambient temperatures other than ratedconditions. Service life may be estimated under spe-cific conditions of temperature and voltage by usingthe curves as shown to the right.

Capacitance vs. TemperatureThe Capacitance vs. Temperature curve may beused to determine the capacitance change as a func-tion of temperature. Capacitance varies by no morethan ±3% over the operating temperature range.

Metallized Polypropylene

ApplicationsMotor Run Capacitors — provide starting torqueand power factor correction for split phase motorstypically used in refrigeration and air conditioning.

Power Supply Capacitors — are used in powersupply circuits to provide noise suppression, volt-age regulation, and line current reduction.

100

1000

Life vs. Temperature

% of Rated Temperature%

of R

ated

Life

10000

10

050 75 100 125

100000

Life vs. Voltage

% of Rated Voltage

% o

f Rat

ed L

ife

90 95 100 105 110 115 120 0

50

100

150

200

250

-6

-4

-2

0

2

4

Capacitance vs. Temperature

Temperature °C

Cap

acita

nce

Cha

nge

%

-40 -20 0 20 40 60 80 100



CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Type SM – Oval Case Style

Case Code Dimensions (Inches)

Case Code A B HKK 1.31 2.16 see tableKT 1.91 2.91 see tableKB 1.97 3.66 see table

A ± .06

B ± .06

.50 MAX.

H + .12 - .06

.81 ± .06

Cap. Stock Catalog Case H(µF) Items Number Code (inches)

370 Vac 70°C Case Temperature

2.0 S KKSM37U205M18 KK 1.502.0 S KKSM37U205M23 KK 2.193.0 S KKSM37U305M18 KK 1.503.0 S KKSM37U305M23 KK 2.194.0 S KKSM37U405M18 KK 1.50

4.0 S KKSM37U405M23 KK 2.195.0 S KKSM37U505M18 KK 1.505.0 S KKSM37U505M23 KK 2.196.0 S KKSM37U605M18 KK 1.506.0 S KKSM37U605M23 KK 2.19

7.5 S KKSM37U755M23 KK 2.1910.0 S KKSM37U106M2B KK 2.6912.5 S KKSM37U1255M32 KK 3.1315.0 S KKSM37U156M3E KK 3.8817.5 S KTSM37U1755M2B KT 2.69

20.0 KKSM37U206M3E KK 3.8820.0 S KTSM37U206M2B KT 2.6925.0 S KTSM37U256M2B KT 2.6930.0 S KTSM37U306M32 KT 3.1335.0 S KTSM37U356M32 KT 3.13

40.0 S KTSM37U406M3E KT 3.8845.0 S KTSM37U456M3E KT 3.8845.0 KBSM37U456M3E KB 3.8850.0 S KTSM37U506M3E KT 3.8850.0 S KBSM37U506M3E KB 3.88

440 Vac 70°C Case Temperature

Cap. Stock Catalog Case H 2.0 S KKSM44U205M23 KK 2.19(µF) Items Number Code (inches) 3.0 S KKSM44U305M23 KK 2.19

240 Vac 70 °C Case Temperature 4.0 S KKSM44U405M23 KK 2.19

4.0 KKSM24U405M23 KK 2.19 5.0 S KKSM44U505M23 KK 2.195.0 KKSM24U505M23 KK 2.19 6.0 S KKSM44U605M2B KK 2.69

6.0 KKSM24U605M23 KK 2.19 7.5 S KKSM44U755M32 KK 3.137.5 KKSM24U755M23 KK 2.19 10.0 S KKSM44U106M3E KK 3.88

10.0 KKSM24U106M23 KK 2.19 15.0 KKSM44U156M3E KK 3.88

15.0 KKSM24U156M2B KK 2.69 15.0 S KTSM44U156M2B KT 2.6920.0 KKSM24U206M32 KK 3.13 20.0 S KTSM44U206M3E KT 3.88

25.0 KTSM24U256M2B KT 2.69 25.0 S KTSM44U256M3E KT 3.8830.0 KTSM24U306M2B KT 2.69 30.0 S KTSM44U306M3E KT 3.8835.0 KTSM24U356M2B KT 2.69 35.0 S KBSM44U356M3E KB 3.88

40.0 KTSM24U406M32 KT 3.13 40.0 S KBSM44U406M3E KB 3.8845.0 KTSM24U456M32 KT 3.13 45.0 S KBSM44U456M3E KB 3.88

50.0 KTSM24U506M32 KT 3.13 50.0 S KBSM44U506M3E KB 3.8860.0 KTSM24U606M3E KT 3.88 55.0 S KBSM44U556M44 KB 4.2570.0 KTSM24U706M3E KT 3.88 60.0 S KBSM44U606M44 KB 4.25

S





CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

6-32 screwand nut

Case Code BracketKK 32107-1KT 32107-2KB 32107-3

Universal MountingBrackets

Case Height Bracket2.19 31762-452.69 31762-473.13 31762-493.88 31762-184.25 31762-5231762

Side MountFooted Bracket(2 required)

30434

Case Height Bracket2.19 30434-342.69 30434-423.13 30434-493.88 30434-614.25 30434-67

End MountFooted Bracket(2 required)

Case Code BracketKK 30393-5KT 30393-9KB 30393-10

30393

Accessories for Oval Capacitors

Wrap AroundBracket

Insulating Terminal BootsUL 465 Listed

Options• Tinplated steel cans are standard. Aluminum

cases are available upon request.• Tighter capacitance tolerances such as ±3%

or ±6% are available.• +90°C ratings are available for HID lighting and

power supply applications.• Discharge resistors are available.• Special terminal lugs such as 4 tines per

terminal or 2 tines plus 1 fork lug available.• Dual capacitance values are available for 370

Vac and 440 Vac applications.

44603 32108-2

32107

Cap. Stock Catalog Case H(µF) Items Number Code (inches)

480 Vac 70 °C Case Temperature4.0 KKSM48U405M23 KK 2.195.0 KKSM48U505M32 KK 3.136.0 KKSM48U605M32 KK 3.137.5 KKSM48U755M32 KK 3.13

10.0 KKSM48U106M32 KK 3.13

15.0 KTSM48U156M32 KT 3.1320.0 KTSM48U206M3E KT 3.8825.0 KTSM48U256M3E KT 3.8830.0 KTSM48U306M3E KT 3.8840.0 KBSM48U406M3E KB 3.88

660 Vac 70 °C Case Temperature

1.0 KKSM66U105M23 KK 2.192.0 S KKSM66U205M23 KK 2.193.0 S KKSM66U305M23 KK 2.194.0 S KKSM66U405M2B KK 2.695.0 S KKSM66U505M32 KK 3.13

6.0 S KKSM66U605M3E KK 3.888.0 S KKSM66U805M3E KK 3.888.0 S KTSM66U805M32 KT 3.13

10.0 S KKSM66U106M3E KK 3.8810.0 S KTSM66U106M32 KT 3.13

12.0 S KTSM66U126M32 KT 3.1315.0 S KTSM66U156M3E KT 3.8818.0 KTSM66U186M3E KT 3.8818.0 S KBSM66U186M3E KB 3.8820.0 S KBSM66U206M3E KB 3.88

25.0 S KBSM66U256M3E KB 3.8830.0 KBSM66U306M3E KB 3.8835.0 KBSM66U356M3E KB 3.8840.0 KBSM66U406M44 KB 4.25

S

S

6-32 screwand nut



CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Cap. Stock Catalog Case H Cap. Stock Catalog Case H(µF) Items Number Code (inches) (µF) Items Number Code (inches)

370 Vac 70 °C Case Temperature 370 Vac 70 °C (cont’d)2.0 SMP37U205M24 P 2.25 90.0 SMT37U906M3C T 3.753.0 SMP37U305M24 P 2.25 100.0 SMT37U107M44 T 4.25

4.0 S SMP37U405M24 P 2.25 440 Vac 70 °C Case Temperature5.0 SMP37U505M24 P 2.25 2.0 SMP44U205M24 P 2.256.0 SMP37U605M24 P 2.25 3.0 SMP44U305M24 P 2.25

7.5 SMP37U755M24 P 2.25 4.0 SMP44U405M24 P 2.2510.0 S SMP37U106M24 P 2.25 5.0 SMP44U505M24 P 2.2512.5 S SMP37U1255M24 P 2.25 6.0 SMP44U605M24 P 2.25

15.0 S SMP37U156M2E P 2.88 7.5 S SMP44U755M2E P 2.8817.5 SMP37U1755M2E P 2.88 10.0 SMP44U106M2E P 2.88

20.0 S SMP37U206M2E P 2.88 12.5 SMP44U1255M2E P 2.8825.0 S SMP37U256M2E P 2.88 15.0 S SMP44U156M2E P 2.8830.0 S SMP37U306M2E P 2.88 17.5 SMP44U1755M2E P 2.88

35.0 S SMS37U356M2E S 2.88 20.0 SMP44U206M2E 2.8840.0 S SMS37U406M2E S 2.88 25.0 SMS44U256M3C S 3.7545.0 SMS37U456M3C S 3.75 30.0 S SMS44U306M3C S 3.7550.0 SMS37U506M3C S 3.75 35.0 SMT44U356M2E T 2.8855.0 SMS37U556M3C S 3.75 40.0 SMT44U406M3C T 3.75

60.0 S SMT37U606M3C T 3.75 45.0 SMT44U456M3C T 3.7565.0 SMT37U656M3C T 3.75 50.0 SMT44U506M3C T 3.7570.0 SMT37U706M3C T 3.75 55.0 SMT44U556M44 T 4.25

75.0

S

SMT37U756M3C T 3.75 60.0 S SMT44U606M44 T 4.25

80.0 SMT37U806M3C T 3.75

SS

P

S

S

S

.81 ± .06

D ± .06

H + .12 - .06

.50 MAX.Case Code Bracket

P 32107-6AS 32107-7AT 32107-8A

3 Footed Round 2 Footed RoundMounting Bracket Mounting Bracket

Case Code BracketP 30393-23S 30393-24T 30393-25

Case Code BracketP 32107-6S 32107-7T 32107-8

Wrap Around Bracket

Type SM - Round Case Style Hardware for Round Capacitors

Case Code D (inches) HP 1.87 see tableS 2.12 see tableT 2.62 see table

Case Code




Type ETW Motor Start Capacitors

CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

Type ETW – Non PolarizedAluminum Electrolytic

ApplicationAC Motor Start capacitors provide small AC motorswith starting torque. They are designed for intermit-tent AC duty. Type ETW capacitors are provided witha pressure safety vent and are furnished in phenoliccases.

Highlights• Voltage range: 125 to 330 Vac• Capacitance range: 21 to 1200 µF• 50,000 starts minimum• Temperature range: -40°C to 65°C• Operating frequency: 50-60 Hz• Meets EIA RS463 Type II• 2-bladed quick connects; standard terminations• Specify "R" at end of part number for 15,000

ohm, 2 Watt, bleeder resistor.

Case Dimensions Case DimensionsCap. Stock Catalog Inches Cap. Stock Catalog InchesµF Items Number D L C µF Items Number D L C

125 Vac 125 Vac (cont’d)21-25 S ETW21-125-N1 1.437 2.750 0.500 378-454 S ETW378-125-N2 1.437 3.375 0.50025-30 S ETW25-125-N1 1.437 2.750 0.500 400-480 S ETW400-125-N2 1.437 3.375 0.50030-36 S ETW30-125-N1 1.437 2.750 0.500 430-516 S ETW430-125-N2 1.437 3.375 0.50036-43 S ETW36-125-N1 1.437 2.750 0.500 460-552 S ETW460-125-N2 1.437 3.375 0.50043-52 S ETW43-125-N1 1.437 2.750 0.500 540-648 S ETW540-125-N4 1.812 3.375 0.62553-64 S ETW53-125-N1 1.437 2.750 0.500 590-708 S ETW590-125-N4 1.812 3.375 0.62564-77 S ETW64-125-N1 1.437 2.750 0.500 708-850 S ETW708-125-N4 1.812 3.375 0.62572-86 S ETW72-125-N1 1.437 2.750 0.500 829-995 S ETW829-125-N4 1.812 3.375 0.625

88-106 S ETW88-125-N1 1.437 2.750 0.500 1000-1200 S ETW1000-125-N7 2.062 4.375 0.875108-130 S ETW108-125-N1 1.437 2.750 0.500 165 Vac124-149 S ETW124-125-N1 1.437 2.750 0.500 108-130 ETW108-165-N1 1.437 2.750 0.500130-156 S ETW130-125-N1 1.437 2.750 0.500 145-174 ETW145-165-N1 1.437 2.750 0.500145-174 S ETW145-125-N1 1.437 2.750 0.500 161-193 ETW161-165-N1 1.437 2.750 0.500161-193 S ETW161-125-N1 1.437 2.750 0.500 189-227 ETW189-165-N2 1.437 3.375 0.500189-227 S ETW189-125-N1 1.437 2.750 0.500 216-260 ETW216-165-N4 1.812 3.375 0.625200-240 S ETW200-125-N1 1.437 2.750 0.500 233-280 ETW233-165-N4 1.812 3.375 0.625216-259 S ETW216-125-N1 1.437 2.750 0.500 243-292 ETW243-165-N4 1.812 3.375 0.625233-280 S ETW233-125-N1 1.437 2.750 0.500 270-324 ETW270-165-N4 1.812 3.375 0.625243-292 S ETW243-125-N1 1.437 2.750 0.500 324-390 ETW324-165-N4 1.812 3.375 0.625270-324 S ETW270-125-N1 1.437 2.750 0.500 340-408 ETW340-165-N4 1.812 3.375 0.625300-360 S ETW300-125-N1 1.437 2.750 0.500 378-454 ETW378-165-N4 1.812 3.375 0.625324-389 S ETW324-125-N1 1.437 2.750 0.500 400-480 ETW400-165-N4 1.812 3.375 0.625340-408 S ETW340-125-N2 1.437 3.375 0.500 430-516 ETW430-165-N4 1.812 3.375 0.625


Type ETW Motor Start Capacitors

CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Bracket, Endcap & Capacitor Assembly Mounting Hardware

* Order both endcap and bracket for mounting

Case Case Dimensions Optional Optional Code (inches) End Mounting

D L Cap BracketN1 1.437 2.750 30066 34946-2

N2 1.437 3.375 30066 34946

N4 1.812 3.375 34618-3 34946

N6 2.062 3.375 34618-2 34946

N7 2.062 4.375 34618-2 34946-1

Case Dimensions Case DimensionsCAP Stock Catalog Inches CAP Stock Catalog InchesµF Items Number D L C µF Items Number D L C

250 Vac 250 Vac (cont’d)21-25 S ETW21-250-N1 1.437 2.750 0.500 270-324 S ETW270-250-N6 2.062 3.375 0.87525-30 S ETW25-250-N1 1.437 2.750 0.500 340-408 S ETW340-250-N7 2.062 4.375 0.875

30-36 S ETW30-250-N1 1.437 2.750 0.500 330 Vac36-43 S ETW36-250-N1 1.437 2.750 0.500 21-25 S ETW21-330-N2 1.437 3.375 0.50043-52 S ETW43-250-N1 1.437 2.750 0.500 25-30 S ETW25-330-N2 1.437 3.375 0.500

53-64 S ETW53-250-N1 1.437 2.750 0.500 30-36 S ETW30-330-N2 1.437 3.375 0.50056-72 S ETW56-250-N1 1.437 2.750 0.500 36-43 S ETW36-330-N2 1.437 3.375 0.50064-77 S ETW64-250-N1 1.437 2.750 0.500 43-52 S ETW43-330-N4 1.812 3.375 0.625

72-86 S ETW72-250-N4 1.812 3.375 0.625 53-64 S ETW53-330-N4 1.812 3.375 0.62588-106 S ETW88-250-N4 1.812 3.375 0.625 64-77 S ETW64-330-N4 1.812 3.375 0.625


145-174 S ETW145-250-N4 1.812 3.375 0.625 124-149 S ETW124-330-N7 2.062 4.375 0.875161-193 S ETW161-250-N6 2.062 3.375 0.875 130-156 S ETW130-330-N7 2.062 4.375 0.875


243-292 S ETW243-250-N6 2.062 3.375 0.875 216-259 S ETW216-330-N7 2.062 4.375 0.875




CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

VOLTAGE RATINGThe capacitorsís rated voltage must be greater than or equal tothe average voltage across the capacitor' s terminals during the mo-tor starting cycle. This is not the same voltage as the motorline voltage. In addition, the cutoff voltage rating of the capaci-tor must be greater than or equal to the maximum voltage attainedacross the terminals of the capacitor in actual service.

The maximum recommended cut-off voltages for the four stan-dard voltage ratings are as follows:

Rated Maximum Voltage (rms) Cut-Off Voltage (rms) 125 160 165 210 250 300 330 400

These ratings are based on the maximum capacitor temperatureof 65 ∫C.

CAPACITANCE RATINGThe capacitance is chosen to give the necessary starting torque tothe motor. The minimum capacitance value is the minimum de-signed capacitance. The maximum capacitance is 20% more thanthe minimum value.

DUTY CYCLEThe duty cycle should be calculated for each application. It is theratio of the time the capacitor is on voltage to the total time of onecycle. The duty cycles for the normal performance of standard TypeII capacitors are listed in Table A. CDE type ETW capacitors may beused in any intermittant application within their temperature andvoltage range where the duty cycle does not exceed that listed in TableA. This is in accordance with the standards in EIA SpecificationRS-463 for Type II capacitors. If a particular application exceeds thenormal duty cycle, but does not exceed the values listed in Table B,an extra performance or Type I capacitor is required.

FREQUENCYThese capacitors are designed for 60 Hz application but maybe operated in the range of 47 Hz - 60 Hz without damage providedvoltage limitations stated above are observed. For other variationsin frequency, contact CDE.

Application Guide for Type ETW Motor Start Capacitors

From ToSecs.(On)

Secs.(Off)

21-25 81-106 0.75 29.25 2.500 50,000 108-130 145-174 1 59 1.670 50,000 161-193 233-280 1 89 1.110 33,500 243-292 378-454 1 119 0.833 25,000 400-480 590-708 1 179 0.556 16,500 645-774 800-960 1 239 0.417 12,500

21-25 88-106 1 59 1.670 33,500 108-130 124-149 1 89 1.110 33,500 130-156 216-259 1 119 0.833 25,000 233-280 340-408 1 179 0.556 16,500 378-454 590-708 1 239 0.417 12,500

21-25 30-36 1 59 1.670 33,500 36-43 64-77 1 89 1.110 33,500 72-86 88-106 1 119 0.833 25,000

108-130 189-227 1 179 0.556 16,500 216-259 324-389 1 239 0.417 12,500

21-25 21-25 1 59 1.670 33,500 25-36 30-36 1 89 1.110 33,500 36-43 64-77 1 119 0.833 25,000 72-86 88-106 1 179 0.556 16,500

108-130 130-156 1 239 0.417 12,500

125

165

250

330

Capacitance Rating (µ F)

Rated Voltage

VAC (rms)

%Duty

Cycle

# of

Starts

Duty Cycle

Typical life expectancy is 50,000 cycles for 125V ratings, and 40,000total cycles for 165, 250 and 330V ratings. The number of cyclesshown in the table above are for the convenient test time of 35 days

total for all ratings.

Duty Cycles of Type I

Duty Cycles of Type II

If an application exceeds the duty cycles of Type I, other methods ofcapacitor selection must be used. Contact CDE, for Engineering

assistance.

Table A

Secs.(On)

Secs.(Off)

125 0.75 29.25 2.500 75,000165 1 59 1.670 40,000250 1 59 1.670 40,000330 1 59 1.670 40,000

Rated Voltage

VAC (rms)

allall

allall

Capacitance Rating (µ F)

Duty Cycle %Duty

Cycle

# of

Starts

Table B

MOUNTINGVertical mounting of the capacitor with the terminalsup is recommended. However, horizontal mounting isacceptable providing the vent is in the upward position.Vertical mounting with the terminals down is notrecommended because the capacitor life may be reduced.


CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Type OTB DC/AC Dual Rated Capacitors


400 Vdc (236 Vac) – Paper Dielectric 1000 Vdc (440 Vac) – Paper Dielectric3.0 OTBE305KNPIR A 2.13 0.10 OTBG104KNPIR A 2.134.0 OTBE405KNPIR A 2.38 0.25 S OTBG254KNPIR A 2.135.0 OTBE505KNPIR A 2.63 0.50 S OTBG504KNPIR A 2.136.0 OTBE605KNPIR A 2.88 1.0 OTBG105KNPIR A 2.138.0 OTBE805KNPIR A 3.88 2.0 OTBG205KNPIR A 2.63

10.0 OTBE106KNPIR A 4.75 3.0 OTBG305KNPIR A 3.1312.0 OTBE126KNPIR C 3.13 4.0 OTBG405KNPIR A 4.2515.0 OTBE156KNPIR C 3.50 5.0 OTBG505KNPIR A 4.7520.0 OTBE206KNPIR C 4.75 6.0 OTBG605KNPIR C 3.1325.0 OTBE256KNPIR C 5.75 8.0 OTBG805KNPIR C 4.25

30.0 OTBE306KNPIR C 6.75 10.0 OTBG106KNPIR C 4.75

600 Vdc (330 Vac) – Paper Dielectric 12.0 OTBG126KNPIR C 5.75

0.50 OTBF504KNPIR A 2.13 15.0 OTBG156KNPIR C 7.251.0 OTBF105KNPIR A 2.13 20.0 OTBG206KNPIR D 7.252.0 OTBF205KNPIR A 2.13 25.0 OTBG256KNPIR D 9.00

3.0 OTBF305KNPIR A 2.38 1500 Vdc (660 Vac) – Film/Paper Dielectric4.0 OTBF405KNPIR A 2.63 0.50 OTBH504KNPIR A 2.13

5.0 OTBF505KNPIR A 3.13 1.0 S OTBH105KNPIR A 2.136.0 OTBF605KNPIR A 3.88 2.0 S OTBH205KNPIR A 3.138.0 OTBF805KNPIR A 4.75 3.0 S OTBH305KNPIR A 4.25

10.0 OTBF106KNPIR C 3.13 4.0 OTBH405KNPIR C 3.13

12.0 OTBF126KNPIR C 3.88 5.0 OTBH505KNPIR C 3.50

15.0 OTBF156KNPIR C 4.25 6.0 OTBH605KNPIR C 4.2520.0 OTBF206KNPIR C 5.75 8.0 OTBH805KNPIR C 5.2525.0 OTBF256KNPIR C 6.75 10.0 OTBH106KNPIR D 5.2530.0 OTBF306KNPIR D 6.25 12.0 OTBH126KNPIR D 5.75

35.0 OTBF356KNPIR D 7.25 15.0 OTBH156KNPIR D 6.75

Type OTB – Paper-Film/FoilApplicationsUse Type OTB capacitors for all normal blocking,filtering and bypass applications where anystandard DC capacitor may be used. They may alsobe used in motor-run and other 60 Hz applications.

Highlights• Voltage ratings DC/AC: 400/236, 600/330, 1000/440, 1500/660, 2000/700, 2500/800, 3000/950• Capacitance range: 0.1 µF to 35.0 µF• Capacitance tolerance: ±10%• Temperature range: -55°C to 85°C• Protected: Pressure sensitive interrupter• Listed under UL File No. E56959• CSA Certified file No. LR075387• Environmentally compatible• Solder Lug terminations




CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

Type OTB DC/AC Dual Rated Capacitors


2000 Vdc (700 Vac) – Film/Paper Dielectric 3000 Vdc (950 Vac) – Film/Paper Dielectric0.10 OTBJ104KNPIR A 2.13 0.10 OTBL104KNPIR A 2.130.25 OTBJ254KNPIR A 2.13 0.25 OTBL254KNPIR A 2.130.50 OTBJ504KNPIR A 2.13 0.50 OTBL504KNPIR C 2.881.0 OTBJ105KNPIR A 2.63 1.0 OTBL105KNPIR C 2.882.0 OTBJ205KNPIR A 4.25 2.0 OTBL205KNPIR C 4.25

3.0 OTBJ305KNPIR C 3.50 3.0 OTBL305KNPIR C 5.754.0 OTBJ405KNPIR C 4.25 4.0 OTBL405KNPIR D 5.755.0 OTBJ505KNPIR C 4.75 5.0 OTBL505KNPIR D 6.75

6.0 OTBJ605KNPIR C 5.758.0 OTBJ805KNPIR D 5.75

10.0 OTBJ106KNPIR D 6.75

2500 Vdc (800 Vac) – Film/Paper Dielectric0.50 OTBK504KNPIR A 2.131.0 OTBK105KNPIR C 2.882.0 OTBK205KNPIR C 3.133.0 OTBK305KNPIR C 4.254.0 OTBK405KNPIR C 5.75

5.0 OTBK505KNPIR C 6.756.0 OTBK605KNPIR D 5.757.0 OTBK705KNPIR D 6.758.0 OTBK805KNPIR D 7.25

S

6-32 screwand nut

Case Code BracketA 32107-1C 32107-2D 32107-3

30434EndMount(2 required)

31762SideMount(2 required)

UniversalMountingBracket32107

WrapAroundBracket30393

Mounting Hardware

H (Inches) End Mount Side Mount2.13 30434-33 31762-452.38 30434-37 31762-462.63 30434-41 31762-472.88 30434-45 31762-483.13 30434-49 31762-493.50 30434-55 31762-503.75 30434-59 31762-833.88 30434-61 31762-514.25 30434-67 31762-524.75 30434-75 31762-545.25 30434-83 31762-555.75 30434-91 31762-566.25 30434-99 31762-596.75 30434-107 31762-607.25 30434-115 31762-629.00 30434-127 31762-78

A ± .06

B ± .06

.50 MAX.

H + .12 - .06

.81 ± .06

Dimensions (Inches)Case Code A B H

A 1.31 2.16 see tableC 1.91 2.91 see tableD 1.97 3.66 see table

Case Code



CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Type SCR Commutating Capacitors

Type SCR –Film-Paper/Extended FoilApplicationsType SCRN capacitors are for SCR (silicon controlledrectifier) commutating applications, requiring high peakand rms current capability. These capacitors are ideal forother high frequency and pulsed applications.

Highlights• Voltage ratings 200 to 2000 Vpk• Capacitance range: 0.25 to 50 µF• Capacitance tolerance: ±10%• Temperature range: -40°C to 65°C

80°C surface temperature• 40,000 Hour, 95% minimum survival at full

rated temperature and volt-amps• Conforms to EIA RS401• 1/4 x 20 threaded studs for high current• Tinplated steel case standard. Non ferrous

covers available for high frequency applications.

Cap. Stock Catalog Case H Max VA Max Amps Cap. Stock Catalog Case H Max VA Max Amps(µF) Item Number Code (inches) (65°C) RMS (µF) Item Number Code (inches) (65 °C) RMS

200 Vpk (Paper dielectric) 600 Vpk (Film dielectric for low-loss)3.0 SCRN201R A 2.13 400 60 1.0 SCRN262R A 2.38 2200 605.0 SCRN202R A 2.63 465 60 2.0 SCRN263R A 2.38 2060 60

10.0 S SCRN203R A 3.88 625 60 3.0 SCRN264R A 3.88 3190 6015.0 SCRN205R A 4.75 765 60 5.0 SCRN265R A 4.25 4380 6020.0 SCRN206R B 4.25 875 60 10.0 SCRN266R C 4.25 6060 60

30.0 SCRN208R C 5.25 1200 60 1000 Vpk ( Film and Paper dielectric)40.0 SCRN209R C 6.75 1500 60 1.0 S SCRN233R A 2.13 790 6050.0 SCRN210R D 5.75 1590 60 2.0 S SCRN234R A 3.13 1070 60

400 Vpk (Film and Paper dielectric) 3.0 SCRN235R A 3.88 1455 60

2.0 SCRN211R A 2.63 790 60 5.0 S SCRN236R B 4.25 1785 603.0 SCRN212R A 2.63 970 60 10.0 SCRN237R C 5.75 2570 60

5.0 SCRN213R A 3.88 1130 60 15.0 SCRN238R D 5.75 3170 6010.0 SCRN214R B 4.75 1930 60 20.0 S SCRN239R E 5.13 5200 100

15.0 SCRN215R C 4.75 2240 60 1500 Vpk (Film and Paper dielectric)20.0 SCRN216R C 6.25 2800 60 0.50 S SCRN240R A 2.13 990 6030.0 SCRN217R D 6.75 3720 60 1.0 S SCRN241R A 2.88 1240 6040.0 SCRN218R D 8.00 4330 60 2.0 S SCRN242R B 3.50 1890 6050.0 SCRN219R E 6.25 6050 100 3.0 S SCRN243R C 4.25 2550 60

600 Vpk (Film and Paper dielectric) 5.0 SCRN244R C 5.75 3250 60

2.0 SCRN220R A 2.63 815 60 10.0 SCRN245R E 5.13 6500 100

3.0 SCRN221R A 3.13 1200 60 2000 Vpk (Film and Paper dielectric)5.0 S SCRN222R A 4.25 1420 60 0.25 S SCRN246R A 2.13 990 60

10.0 S SCRN224R C 4.25 2040 60 0.33 SCRN257R A 2.13 1000 6015.0 SCRN226R C 5.75 2800 60 0.50 S SCRN247R A 2.63 1180 60

20.0 S SCRN227R D 5.75 3260 60 1.0 S SCRN248R A 3.13 1300 6025.0 S SCRN229R D 6.75 3720 60 2.0 SCRN249R B 4.25 2230 60

30.0 SCRN230R D 8.00 4330 60 3.0 SCRN251R C 4.75 2800 6040.0 SCRN231R E 6.25 6060 100 5.0 S SCRN253R D 5.75 4020 6050.0 SCRN232R E 7.25 6850 100 10.0 S SCRN256R F 5.75 7600 100




CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors


H (Inches) Side Mount2.13 31762-452.38 31762-462.63 31762-472.88 31762-483.13 31762-493.50 31762-503.75 31762-833.88 31762-514.25 31762-524.75 31762-545.13 31762-1325.25 31762-555.75 31762-566.25 31762-596.75 31762-607.25 31762-628.00 31762-639.00 31762-78

Case Code BracketA 30393-5B 30393-3C 30393-9D 30393-10E -F -

Case Code BracketA 32107-1B -C 32107-2D 32107-3E -F -

6-32 screwand nut



31762SideMount(2 required)

B±.03"

A±.03"

1.13"±.06"

H"±.06"

F±.03" 1/4 -20 THD.

0.50"±.06"

( 2 PLCS )

A±.03"

B±.03"

1.13"±.06"

H"±.06"

1/4 -20 THD.

0.50"±.06"

( 2 PLCS )

F±.03"

Mounting Hardware

Dimensions (inches) Case Code A B F H Figure

A 1.31 2.16 0.81 see table Fig. 1B 1.56 2.69 1.25 see table Fig. 1C 1.91 2.91 1.38 see table Fig. 1D 1.97 3.66 1.38 see table Fig. 1E 2.84 4.56 2.00 see table Fig. 2F 3.75 4.56 2.00 see table Fig. 2

Figure 1 Figure 2

Case Code Mounting Hardware


CORNELLDUBILIER


High-Voltageand

Motor Capacitors


and for a squarewave the current is:

Irms = C∆V/0.64(tT)0.5 = Ipeak(t/T)0.5

where f is repetition frequency in Hz, C is nominalcapacitance in µF, ∆V the peak-to-peak squarewaveamplitude in volts, t is the pulse width in µs and T is thepulse period in µs.

The peak current for the square wave voltage is:

Ipeak = C∆V/0.64t

VpeakVoltage

∆V

T

tI peak

SQUARE WAVE APPLICATIONS

CURRENT

How to Choose a Commutating Capacitor

1. From circuit analysis or measurement, determineapplication values for these six parameters:

Nominal capacitance in µFCurrent pulse width in µsCurrent pulse period in µsMaximum peak voltageContinuous AC voltage in VrmsMaximum volt-amps

2. Choose a capacitor from the ratings table of thedesired nominal capacitance with a peak voltagerating no less than your maximum peak voltage.

3. Check that your application’s rms current is no morethan the capacitor ’s Max. Amps RMS. You cancalculate the current from your Vrms using the equa-tions in the following section.

4. Check that your application’s volt-amperes is not morethan the capacitor’s VA capability. The VA capability isthe max VA rating times the Volt-Ampere multiplier fromFigure 2 (Current Pulse Width) and that times the Volt-Ampere Multiplier from Figure 3 (Ambient Tempera-ture). See the following section for more on using volt-ampere multipliers.

If you need a greater VA capability, repeat these stepsfor a higher peak voltage capacitor or consider connect-ing units in parallel to divide the VA required. For up topeak voltage of 600 V, you may also consider polypropy-lene film dielectric units, Catalog Numbers SCRN262Rthrough SCRN266R, with higher VA capability.

Using Volt-Ampere RatingsThe capacitors maximum VA rating is the maximum prod-uct of the sinewave voltage and current that may be ap-plied at 65°C without overheating the capacitor and re-ducing its expected life. For other temperatures andpulsed current, use the multipliers of Figures 2 and 3 toderate the Max VA rating.

The Max Amps RMS rating is set by the capability of thecapacitor terminals. Exceeding this limit can damage theterminals and cause capacitor failure.

Calculate the capacitor’s actual VA load as the product ofthe rms voltage across the capacitor and the rms currentthrough the capacitor. To calculate rms current for anapplied sine wave or squarewave voltage, use theseequations.

For a sinewave voltage the current is:

Irms = 2πfCVrmsX10-6

10 20 30 40 50 60 80 100 200 300 400 500 1000

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

PP Film/Paper

Paper

Polypropylene

CURRENT PULSE WIDTH (µs)

VOLT

AMPE

RE M

U LTIP

LIER

25 30 35 40 45 50 55 60 65 70 75 80 85 90

3.0

2.0

1.0

0.0

AMBIENT TEMPERATURE °C

VO

LT

AM

PE

RE

MU LT

IPL

IER

Figure 3

Figure 2

Figure 1




CORNELLDUBILIER


High

-Vol

tage

and

Mot

or C

apac

itors

Type T High Voltage DC Filter Capacitors

Type T – Paper-Film/FoilApplicationsUse Type T capacitors for filter applications. Typicalapplications include: filtering, bypass and blockingradar amplifiers and power supplies.

Highlights• Voltage ratings: 600 - 5000 Vdc• Capacitance range: 0.1µF to 15.0µF• Capacitance tolerance: ±10%• Temperature range: -55°C to 85°C• 105°C operation with derating• Hermetically sealed for long life• 10-32 screw terminals


600 Vdc10.0 T15W10NR D 4.750.50 T6P5NR A 2.1312.0 T15W12NR D 5.251.0 S T6W1NR A 2.1315.0 T15W15NR D 6.252.0 S T6W2NR A 2.13

2000 Vdc3.0 T6W3NR A 2.380.10 T20P1NR A 2.134.0 T6W4NR A 2.880.25 S T20P25NR A 2.136.0 T6W6NR A 3.000.50 S T20P5NR A 2.138.0 T6W8NR C 2.881.0 S T20W1NR A 2.6310.0 S T6W10NR C 3.132.0 T20W2NR C 2.8815.0 T6W15NR D 3.504.0 T20W4NR D 3.501000 Vdc5.0 T20W5NR D 4.250.10 T10P1NR A 2.138.0 T20W8NR D 5.750.25 T10P25NR A 2.13

10.0 T20W10NR D 6.750.50 S T10P5NR A 2.1315.0 T20W15NR D 9.881.0 S T10W1NR A 2.13

2500 Vdc2.0 S T10W2NR A 2.631.0 T25W1NR C 2.884.0 T10W4NR A 4.252.0 T25W2NR C 3.136.0 S T10W6NR C 3.504.0 T25W4NR D 4.258.0 T10W8NR D 3.50

3000 Vdc10.0 S T10W10NR D 3.880.10 T30P1NR A 2.1315.0 T10W15NR D 5.250.50 T30P5NR A 3.131500 Vdc1.0 T30W1NR C 3.130.50 T15P5NR A 2.136.0 T30W6NR D 8.001.0 T15W1NR A 2.13

5000 Vdc2.0 T15W2NR A 3.130.50 T50P5NR C 3.504.0 T15W4NR C 3.131.0 T50W1NR D 4.256.0 T15W6NR D 3.882.0 T50W2NR D 7.258.0 T15W8NR D 4.25

1500 Vdc (cont’d)


CORNELLDUBILIER


High-Voltageand

Motor Capacitors

Type T High Voltage DC Filter Capacitors

H (Inches) End Mount Side Mount2.13 30434-33 31762-452.38 30434-37 31762-462.63 30434-41 31762-472.88 30434-45 31762-483.13 30434-49 31762-493.50 30434-55 31762-503.75 30434-59 31762-833.88 30434-61 31762-514.25 30434-67 31762-524.75 30434-75 31762-545.25 30434-83 31762-555.75 30434-91 31762-566.25 30434-99 31762-596.75 30434-107 31762-607.25 30434-115 31762-628.00 30434-127 31762-63

6-32 screwand nut


Mounting Hardware



B±.03"

A±.03"

1.13"±.06"

H"±.06"

F±.03" 10-32 THD.

0.50"±.06"

( 2 PLCS )


31762SideMount2 per

30434EndMount2 per

Dimensions (Inches)Case Code A B F H

A 1.31 2.16 0.81 see tableC 1.91 2.91 1.38 see tableD 1.97 3.66 1.38 see table

Case Code

B±.03"

A±.03"

1.00"±.06"

H"±.06"

F±.03" 10-32 THD.

0.50"±.06"

( 2 PLCS )

CapacitorKits

CapacitorKits




Capacitor Kits

CORNELLDUBILIER


Capa

cito

rKi

ts

Kit # Description Capacitance Voltage FeaturesRange Range

Surface Mount Aluminum Electrolytic KitsV-CHIP-KIT1 Types AVS, AHA & AFC, General Purpose Kit 10 µF - 1000 µF 6.3 to 50 20 pcs. each of 21 PNs

$95.00* SMT Aluminum Electrolytic Capacitors Vdc (420 capacitors)V-CHIP-KIT2 Types AVS, AHA & AFC, General Purpose Kit 10 µF - 1000 µF 6.3 to 50 10 pcs. each of 21 PNs

$59.00* SMT Aluminum Electrolytic Capacitors Vdc (210 capacitors)V-CHIP-KIT4 Types AFC & AFK, Low [Z], Long Life Kit, 10 mm 10 µF - 1000 µF 10 to 100 10 pcs. each of 18 PNs

$52.00* Max. ht., SMT Aluminum Electrolytic Capacitors Vdc (180 capacitors)AVS-KIT1 Type AVS, Low Cost, General Purpose Kit 0.1 µF - 1000 µF 10 to 50 10 pcs. each of 17 PNs $35.00* SMT Aluminum Electrolytic Capacitors Vdc (170 capacitors)

AFC-KIT1 Type AFC, Low [Z], Long Life Kit 0.1 µF - 470 µF 16 to 50 20 pcs. each of 15 PNs$75.00* SMT Aluminum Electrolytic Capacitors Vdc (300 capacitors)

AFK-KIT1 Type AFK, Low ESR, Low [Z], Long Life Kit 3.3 µF - 470 µF 80 10 pcs. ea. of 6 PNs and$45.00* 80 Vdc, SMT Aluminum Electrolytic Capacitors Vdc 6 pcs. ea. of 4 PNs (84 caps)

AFK-KIT2 Type AFK, Low ESR, Low [Z], Long Life Kit 10 µF - 1000 µF 10 to 100 10 pcs. ea. of 13 PNs and$65.00* SMT Aluminum Electrolytic Capacitors Vdc 6 pcs. ea. of 9 PNs (184 Caps)

AFK-KIT3 Type AFK, Low ESR, Low [Z], Long Life Kit 22 µF - 330 µF 100 10 pcs. ea. of 2 PNs and$85.00* 100 Vdc, SMT Aluminum Electrolytic Capacitors Vdc 6 pcs. ea. of 6 PNs (56 Caps)

Surface Mount Polymer Aluminum Electrolytic Kits

Surface Mount Mica Chip KitsMCSK1 CATV Mica Chips 1 pF - 100 pF 100 Vdc 8 pcs. each of 17 PNs$125.00* 0805 & 1210 cases (136 capacitors)MCSK2 CATV Mica Chips 1 pF - 100 pF 500 Vdc 8 pcs. each of 17 PNs$135.00* 0805 & 1210 cases (136 capacitors)MCSK3 RF Microwave, Pulse & Snubber 1 pF - 91 pF 100 Vdc 8 pcs. each of 18 PNs$135.00* 0805 & 1210 cases (144 capacitors)MCSK4 RF Microwave, Pulse & Snubber 1 pF - 91 pF 500 Vdc 8 pcs. each of 18 PNs$165.00* 1210 cases (144 capacitors)MCSK14 High Voltage Mica Chip Kit 390 pF - 1000 pF 1000 Vdc 8 pcs. each of 10 PNs$185.00* 2220 cases (80 capacitors)MCSK15 Low Frequency Filter Mica Chip Kit 1 pF - 100 pF 100 Vdc 8 pcs. each of 19 PNs$175.00* 0805 & 1210 cases (152 capacitors)

*Recommended resale price. If purchased from CDE distributor, your price may vary.

ESRD-KIT6 $28.00*

Solid Polymer Aluminum Electrolytics (7.3x4.3x1.8 mm)

8.2 µF- 56 µF4.0 to 16

Vdc6 pcs each of 5 PNs

(30 capacitors)ESRD-KIT9

$59.00*Solid Polymer Aluminum Electrolytics

(7.3x4.3x3.1 mm)100 µF- 220 µF

2.0 to 6.3 Vdc

6 pcs each of 5 PNs (30 capacitors)

ESRE-KIT2 $99.00*

Solid Polymer Aluminum Electrolytics (7.3x4.3x4.2 mm)

100 µF- 330 µF2.0 to 8.0


(42 capacitors)ESRL-KIT1

$32.00*Solid Polymer Aluminum Electrolytics

(7.3x4.3x1.1 mm)22 µF- 68 µF

2.0 to 8.0 Vdc

6 pcs each of 5 PNs (30 capacitors)

LAB-KIT3 $455.00*

Large Assortment of ESRD & ESRE Solid Polymer Aluminum Capacitors

8.2 µF- 270 µF2.0 to 16


(408 capacitors)


Capacitor Kits

CORNELLDUBILIER


CapacitorKits

Mica Kits

FCA-KIT1 SMT Acrylic Film Capacitors 0.1 µF - 1.0 µF 16 24 pcs. each of 7 PNs$30.00* 0805, 1206, 1210 cases Vdc (168 capacitors)

FCN-KIT1 SMT PEN Film Chip Capacitors 0.068 µF - .47 µF 16 & 50 10 pcs. each of 8 PNs$36.00* 1913 & 2416 cases Vdc (80 capacitors)

FCN-KIT2 SMT PEN Film Capacitors 0.001 µF - 1.0 µF 100 10 pcs. each of 10 PNs$46.00* 1206 to 3925 cases Vdc (100 capacitors)

FCN-KIT3 SMT PEN Film Capacitors 0.001 µF - 1.0 µF 250 Vdc 10 pcs. each of 12 PNs$75.00* 1913 to 6040 cases (120 capacitors)

FCP-KIT1 SMT Polyphenylene Sulfide (PPS) Film Chips 100 pF - 0.1 µF 50 Vdc 12 pcs. Each of 17 PNs$58.00* 0805,1206,1210 & 1913 cases (204 capacitors)

FCP-KIT2 SMT Polyphenylene Sulfide (PPS) Film Chips 3300 pF - 0.1 µF 16 Vdc 12 pcs. Each of 12 PNs$39.95* 0805, 1206 & 1210 (144 capacitors)

Surface Mount Film Chip Kits

MICA-KIT1 Leaded Mica CD5, CD10, CD15 5 pF - 1000 pF 300 & 500 5 pcs. each of 48 PNs$150.00* CD19, CDV19, Most Popular Ratings Vdc (240 capacitors)

MICA-KIT2 Leaded Mica, CD5 Series 1 pF - 390 pF 50, 100 & 5 pcs. each of 57 PNs$165.00* Various Tolerances 300 Vdc (285 capacitors)

MICA-KIT3 Leaded Mica, CD6 & CD7 Series 1 pF - 1300 pF 100 & 500 5 pcs. each of 48 PNs498.00* ±0.05 pf, ±1%, ±2% Tolerances Vdc (240 capacitors)

MICA-KIT4 Leaded Mica, CD15 & CD19 Series 10 pF - 7500 pF 500 5 pcs each of 72 PNs$398.00* ±5% Tolerance Vdc (360 capacitors)

MICA-KIT5 Leaded Mica Snubber Kit, CD16, CDV16, 100 pF - 10000 pF 500 & 1000 12 Part Numbers$75.00* CD30, CDV30, ±5% Tolerance Vdc (64 capacitors)

MICA-KIT6 Leaded Mica, CD4 Series High Frequency 2 pF - 1500 pF 100 & 500 10 Part Numbers$39.95* for Flat Insertion Loss thru 1 GHz Vdc (67 capacitors)

*Recommended resale price. If purchased from CDE distributor, your price may vary.

Kit # Description Capacitance Voltage FeaturesRange Range

i

Products Listed by Type Designation

CORNELLDUBILIER


140 Technology Place 1605 East Rodney French Blvd.Liberty, SC 29657 New Bedford, MA 02744(864) 843-2277, Fax (864) 843-3800 (508) 996-8564, Fax (508) 996-3830http://www.cornell-dubilier.com http://www.cornell-dubilier.comE-mail: [email protected] E-mail: [email protected]

Type Description Page

057 105 °C Mil, axial, alum capacitor 2.172

066 85 °C std, axial alum capacitor 2.160

066R 105 °C std, axial alum capacitor 2.137

101C 105 °C, screw-term, alum capacitor 2.040

125 125 °C Mil, screw-term, alum cap 2.049

271 HV, large rectangular mica capacitor 4.025



291 HV, large cylindrical mica capacitor 4.027




300 105 °C, 3 pin, radial alum capacitor 2.103

300R 105 °C, 3 pin, lower-ESR, radial alum 2.103

301 105 °C, 2 pin, radial alum capacitor 2.103

301R 105 °C, 2 pin, lower-ESR, radial alum 2.103

325 125 °C, 2 kh, 3 pin, radial alum cap 2.116



330R 105 °C, 10 kh, 3 pin, lo-R, radial alum 2.111


331R 105 °C, 10 kh, 2 pin, lo-R, radial alum 2.111

350 105 °C, 3 pin, lo-L, radial aum cap 2.120

361R 105 °C, 2 Pin, min, radial alum cap 2.124

366R 105 °C, 3 pin, min, radial alum cap 2.124

380L 85 °C Hi-C snap-in alum capacitor 2.058

380LQ 85 °C compact snap-in alum cap 2.054

380LX 85 °C smaller, hi-C snap-in alum cap 2.058

381EL 105 °C, 7 kh, snap-in aluminum cap 2.091

381L 105 °C snap-in aluminum capacitor 2.074

381LQ 105 °C compact, snap-in alum cap 2.070

381LR 105 °C hi-ripple, snap-in alum cap 2.087

381LX 105 °C smaller, snap-in alum cap 2.074

382L 85 °C, 4 or 5 pin, hi-C snap-in alum 2.058

382LX 85 °C, 4 or 5 pin, small, snap-in alum 2.058

383L 105 °C, 4 or 5 pin, hi-C snap-in alum 2.074

383LX 105 °C, 4, 5 pin, small, snap-in alum 2.074

400C 95 °C, 3 pin large radial alum cap 2.135

401C 105 °C, 3 pin large radial alum cap 2.146

420C 85 °C, 3 pin large radial inverter grade 2.140

450C 105 °C, 3 pin large radial inverter grade 2.143

4CMC 85 °C 3 pin hi-C large radial alum cap 2.129

500C 95 °C long-life, alum screw-term cap 2.017

520C 85 °C inverter, alum screw-term cap 2.028


550C 105 °C inverter, alum screw-term cap 2.034

556 105 °C min axial aluminum capacitor 2.155

557UHL 125 °C min mil axial alum capacitor 2.168

7P photoflash, snap-in/lug, alum cap 2.176

930 axial, met polypropylene cap 3.026

935 axial/lugs, met polypropylene cap 3.029

940C axial, double-met polypropylene cap 3.032

941C axial, oval double-met polypro cap 3.034

942C axial, foil-met/hybrid polypro cap 3.036

943C axial, oval foil-met/hybrid polypro cap 3.038

950 AC, motor run, axial, met polypro cap 3.040

AFC 105 °C low Z, long-life, alum SMT 1.012

AFC-KIT1 SMT alum capacitor kit, 300 pcs 7.000

AHA 105 °C long-life, alum SMT cap 1.007

AFK 105 °C low Z, min, long life, alum SMT 1.020

AFK-KIT1 SMT alum capacitor kit, 84 pcs 7.000

AFK-KIT2 7.000

AHD 105 °C low-cap, long life, alum SMT 1.016

AVS 85 °C gen purp, aum SMT cap 1.002

AVS-KIT1 SMT alum capacitor kit, 170 pcs 7.000

CD10 std dipped, radial, mica capacitor 4.002


CD16 snubber/RF, dipped, radial mica cap 4.009

CD17 HF, dipped, radial mica capacitor 4.011






CD5 min dipped, radial mica capacitor 4.006



CDA15 reel-packed, dipped, radial mica cap 4.015

CDS10 min dipped, radial mica capacitor 4.006





CDV16 snubber/RF, dipped, radial mica cap 4.009

CDV18 HF, dipped, radial mica capacitor 4.011

CDV19 std dipped, radial, mica capacitor 4.002

CDV30 std dipped, radial, mica capacitor 4.002

CMR03 hi-rel, dipped, radial mica capacitor 4.020


Products Listed by Type Designation

CORNELLDUBILIER


1605 East Rodney French Blvd. 140 Technology PlaceNew Bedford, MA 02744 Liberty, SC 29657

(508) 996-8564, Fax (508) 996-3830 (864) 843-2277, Fax (864) 843-3800http://www.cornell-dubilier.com http://www.cornell-dubilier.com

E-mail: [email protected] E-mail: [email protected]





D10 std dipped, radial, mica capacitor 4.002

D7 min dipped, radial mica capacitor 4.006

DCMC 85 °C High C, aum screw-term cap 2.005

DLR inductive radial film/foil, polyester cap 3.012

DME compact, radial, met polyester cap 3.017

DMM std, radial, met polyester capacitor 3.020

DMMA AC, radial, met polyester capacitor 3.022

DMT hi-f, radial, film/foil, polyester cap 3.013

DPFF HV, radial, film/foil polypropylene cap 3.044

DPM hi-f, radial, met polypropylene cap 3.048

DPP radial, film/foil, polypropylene cap 3.042

DPPM HV, radial, film/foil polypropylene cap 3.046

DSF min, radial, stacked met polyester cap 3.015

ESRD SMT polymer alum chip capacitor 1.028

ESRD-KIT6 polymer/alum chip kit, 1.8mm, 30 pcs 7.000

ESRD-KIT9 polymer/alum chip kit, 3.1mm, 30 pcs 7.000

ESRE SMT polymer alum chip capacitor 1.031

ESRE-KIT2 polymer/alum chip kit, 4.2mm, 42 pcs 7.000

ESRH SMT polymer alum chip capacitor 1.045

ESRL SMT polymer alum chip capacitor 1.032

ESRL-KIT1 polymer/alum chip kit, 1.1mm, 30 pcs 7.000

ETW motor start capacitor, phenolic cases 6.006

FCA SMT acrylic film chip capacitor 1.064

FCA-KIT1 acrylic film chip kit, 16 V, 168 pcs 7.001

FCN SMT PEN film chip capacitor 1.056

FCN-KIT1 PEN film chip kit, 16 & 50 V, 80 pcs 7.001

FCN-KIT2 PEN film chip kit, 100 V, 100 pcs 7.001

FCN-KIT3 PEN film chip kit, 250 V, 120 pcs 7.001

FCP SMT PPS film chip capacitor 1.052

FCP-KIT1 PPS film chip kit, 50 V, 204 pcs 7.001

FCP-KIT2 PPS film chip kit, 16 V, 144 pcs 7.001

KBSM motor run & HV dc cap oval 1.97x3.66 6.004

KKSM motor run & HV dc cap oval 1.31x2.16 6.004

KTSM motor run & HV dc cap oval 1.91x2.91 6.004

KVX HV & pulse, mica-paper/polymer cap 4.035

LAB-KIT3 polymer/alum chip kit, 408 pcs 7.000

MC SMT mica chip capacitor 1.047


MCSK1 CATV mica chip kit, 100 V, 136 pcs 7.000

MCSK14 HV mica chip kit, 1000 V, 80 pcs 7.000

MCSK2 CATV mica chip kit, 500 V, 136 pcs 7.000

MCSK3 RF& snub mica chip kit, 100V, 144pcs 7.000

MCSK4 RF& snub mica chip kit, 500V, 144pcs 7.000

MICA-KIT1 Leaded Mica Capacitor Kit, popular 7.001

MICA-KIT2 Leaded Mica Capacitor Kit, CD5 7.001

MICA-KIT3 leaded mica capacitor kit, CD6/CD7 7.001

MICA-KIT4 leaded mica capacitor kit, CD15/19 7.001

MICA-KIT5A leaded mica capacitor kit, snubber 7.001

MICA-KIT6 leaded mica capacitor kit, CD4, hf 7.001

MLP 85 °C flatpack, aluminum capacitor 2.095

MLS 125 °C stainless flatpack, alum cap 2.087

MMA AC, Axial, Oval, Met Polyester Cap 3.006

MMP Axial, Oval, Met Polyester capacitor 3.008

MMWA HV, axial, met polyester capacitor 3.010

MPX X2, AC, radial box, met polypro cap 3.050

NLW 105 °C min axial aluminum capacitor 2.153

OTB paper-film/foil, dc/ac rated capacitor 6.011

PD Dry Motor Run Capacitor 6.002

PF photoflash screw term 500V alum cap 2.178

SCC 2 IGBT clamp-snubber mods, diodes 5.006

SCD IGBT Snubber Capacitor Modules 5.002

SCM 1 or 2 IGBT snubber modules, diodes 5.004

SCR paper-film/ext foil commutating cap 6.013

SM motor run & HV dc capacitor, round 6.007

SMP motor run & HV dc cap, 1.75 dia 6.007

SMS motor run & HV dc cap, 2.00 dia 6.007

SMT motor run & HV dc cap, 2.50 dia 6.007

SNU oil filled metallic oval snubber cap 5.029

ST strobe-flash, 360 & 450 V, alum cap 2.180

T paper-film/foil HV dc filter capacitor 6.016

V-CHIP-KIT1 SMT aluminum capacitor kit, 420 pcs 7.000

V-CHIP-KIT2 SMT aluminum capacitor kit, 210 pcs 7.000

V-CHIP-KIT3 7.000

V-CHIP-KIT4 7.000

WBR 85 °C std, axial alum capacitor 2.166

WMC min axial, film/foil polyester capacitor 3.004

WMF axial, film/foil, polyester capacitor 3.002

WPP axial, film/foil polypropylene cap 3.024

new capacitor products - mouser electronics · new type 325, 125 °c long-life, switching-power...

Documents