networking cabinets & enclosures - telecom solution · excel floor standing cabinets – 600mm...
TRANSCRIPT
Networking Cabinets & Enclosures
Excel – An OverviewThe Excel range of structured cabling products provides you with theassurance of quality products backed up with Delta verification and a25 year system warranty, at prices that mean your budget goes thatmuch further.
The Excel brand first appeared back in 1997 with the launch ofCategory 5 cables and patch leads. Wide spread market acceptanceled to extensive product development and in January 1999 an entirerange of Excel products was launched.
Continued product development has seen Excel become one of theleading brands on the market today, with a full range of Category 5eand 6 systems, fibre optics, voice trunking & containment and a fullrange of wall and floor cabinets as detailed in this brochure.
page 2
The Excel floor standing cabinet has been re-launched with
a new look and many improved features. The new design
includes enhanced aesthetics with a metal framed smoked
safety glass front door and dark blue piping.
To assist cable management, each 800 wide Excel floor cabinet
now comes complete with vertical management panels through
which cables can be neatly routed. For further management,
low cost cable hoops can be snapped into these panels at
regular intervals.
Amongst the broad range of accessories available to suit the
rack, is a new four way roof mounted fan tray which is easily
mounted into the aperture in the roof without reducing useable
space within the rack itself.
Each rack is supplied with a glass front door, lockable side
panels, hinged lockable rear door, two sets of 19" mounting
profiles, an earthing kit and transport castors. Sizes are
available from 12u to 47u in height and 600x600, 600x800,
800x600 and 800x800 footprints.
Cabinets available from stock can be delivered free of charge
next day if required, alternatively why not try out our 'Placement
Plus' service and let us place the cabinets in position on site
and remove all packaging.
ContentsFloor Standing Cabinets – 600 series 4Floor Standing Cabinets – 800 series 5Wall Cabinets 6Accessories Plinth Kits 7
Shelves – Fixed 7Shelves – Sliding 7Fans 8Castors / Jacking Feet 8Castor / Feet Support Unit 8Vertical Cable Management Panels 9Quick Fit Cable Hoops 9Baying Kit 9Brush Cover Top Entry 101u 19" Brush Panel 10Roof Infill Panel 10Cable Tray 10Power Distribution Units 11Cable Management Bars 11Cage Nuts 11
page 3
Excel Floor Standing Cabinets – 600mm
The Excel range of floor standing cabinets offer a cost-effective solution to cabling and hardware installations.
The top panel has two removable gland plates for cableentry, which can also be replaced by fan trays where forcedventilation is required. The standard configuration includes4 x adjustable 19" mounting angles, steel rear door, glassfront door, lockable quick release side panels, earth kit andfacility for mounting castors and jacking feet.
Features
● Lockable aesthetically pleasing framed glass door
● Lockable lift off side panels
● Adjustable 19" mounting angles – front and rear
● Earth kit included
● Suitable for up to 450mm shelves
● Optional plinth
page 4 Floor Standing Cabinets
Part Number Size Width Height Depth mm mm mm
540-512 12u 600 650 600
540-515 15u 600 800 600
540-518 18u 600 925 600
540-195 22u 600 1100 600
540-197 22u 600 1100 800
540-200 27u 600 1325 600
540-205 27u 600 1325 800
540-210 39u 600 1850 600
540-215 39u 600 1850 800
540-220 42u 600 2000 600
540-225 42u 600 2000 800
540-230 47u 600 2200 600
540-235 47u 600 2200 800
The Excel range of floor standing cabinets offer a cost-effective solution to cabling and hardware installations.
The 800 series incorporates all of the features of the 600 series with the added advantage of increased cablingroom. To enable maximum flexibility within the cabinet the 19" mounting angles are fitted to horizontal mountingchannels, which provide front and rear movement, thusenabling profiles to be easily moved. Cable management infill panels are mounted to the front 19” profiles.
Features
● Lockable aesthetically pleasing framed glass door
● Lockable lift off side panels
● Adjustable 19" mounting angles – front and rear
● Full height vertical management panels to front
● Earth kit included
● Suitable for up to 750mm shelves
● Optional plinth
Excel Floor Standing Cabinets – 800mm
Floor Standing Cabinets page 5
Part Number Size Width Height Depth mm mm mm
540-247 22u 800 1100 600
540-249 22u 800 1100 800
540-250 27u 800 1325 600
540-255 27u 800 1325 800
540-260 39u 800 1850 600
540-270 39u 800 1850 800
540-275 42u 800 2000 600
540-280 42u 800 2000 800
540-285 47u 800 2200 600
540-290 47u 800 2200 800
Excel wall mount enclosures are suitable for cable and smallLAN installations.
Excel Wall Mounted Enclosures
Excel Wall Mounted Enclosures(Flat Pack)
This enclosure has all the features of the standard Excel modelbut has the added advantage of being supplied in flat packform. This reduces storage space and makes transportationeasy. Assembly is simple and straightforward with fullinstructions supplied.
page 6
Features
● Choice of heights & depths
● Fixed side panels
● Adjustable 19" profiles
● Glass Front Door
Features
● Choice of heights
● Fixed side panels
● Adjustable 19" profiles
● Full assembly instructionsincluded
Wall Cabinets
Part Number Size Width Height Depth mm mm mm
WB6.5/SG FP 6u 600 311 500
WB9.5/SG FP 9u 600 444 500
WB12.5/SG FP 12u 600 577 500
WB15.5/SG FP 15u 600 711 500
WB18.5/SG FP 18u 600 844 500
WB21.5/SG FP 21u 600 977 500
Part Number Size Width Height Depth mm mm mm
WB6.390/SG 6u 600 311 390
WB9.390/SG 9u 600 444 390
WB12.390/SG 12u 600 577 390
WB15.390/SG 15u 600 711 390
WB18.390/SG 18u 600 844 390
WB21.390/SG 21u 600 977 390
WB6.5/SG 6u 600 311 500
WB9.5/SG 9u 600 444 500
WB12.5/SG 12u 600 577 500
WB15.5/SG 15u 600 711 500
WB18.5/SG 18u 600 844 500
WB21.5/SG 21u 600 977 500
Plinth Kits
Available as an option on all sizes of Excel floor cabinets. The plinth increases the overall height of the cabinet byapproximately 100mm and allows for easy cable access into thebase of the cabinet via removable trim plates at front and rear.The plinth will accept castors or jacking feet.
Features
● Improved cable entry to cabinet
● Castor/jacking footing mounting facility
● Increases cabinet height
Shelves
Front Mounted Modem / Cantilever Vented Shelves
Available in two heights to fix directly to the front of the 19" mounting angles. Ventilated to assist airflow.
Features
● Choice of depths
● Light grey painted finish
● Maximum load 35kg
page 7
Fixed ● Choice of depths● Light grey painted finish● Maximum load 100kg
N.B. Only 460mm fixed and 460mm sliding fit in Excel 600 deep cabinet.
Sliding ● Choice of depths● Light grey painted finish● Maximum load 30kg
Accessories
Part Number Description KG Depth Rating mm
540-481 19” Fixed Shelf 100 460
540-482 19” Fixed Shelf 100 555
540-483 19” Fixed Shelf 100 660
540-484 19” Fixed Shelf 100 755
540-485 19” Sliding Shelf 30 460
540-486 19” Sliding Shelf 30 660
Part Number Width Height Depth mm mm mm
540-240 600 100 600
540-245 600 100 800
540-295 800 100 600
540-300 800 100 800
Part Number Description
MS19 190mm Deep Front Mounted Modem/CantileverVented Shelf 1u
MS40 400mm Deep Front Mounted Modem/CantileverVented Shelf 2u
Roof Mount Fan Trays
These units fit into the roof section of the Excel floor standingcabinets. Supplied with mains lead CEE22 to 13 AMP Plug,consists of two or four 230V, 50Hz 38mm fans.
Rack Mount Fan Trays
19" rack mounted fan tray available with three or six 230V 50Hzfans. Supplied with mains lead CEE22 to 13 AMP plug. Neonlight fitted to the front of the panel.
3 way version – 1u x 238mm deep.
6 way version – 1u x 370mm deep.
Castors / Jacking Feet
Castors can be added to the cabinet base to improvemobility. Jacking feet can be used to allow levelling onuneven floors and prevent.
Features● Easy to fit● Supplied in sets of four
page 8
Features
● Choice of 3 or 6 way unit
● Light grey painted finish
● Occupies 1u of rack space
Features
● Quick and easy to fit
● Two or four per tray
● Supplied with mains lead
● Maximum of two units (four fans) per cabinet
● Air flow 78 – 84M3 /HR per fan
● Noise level 27 – 28dBA
Accessories
Castor / Feet Support Unit
This support allows castors and feet to be fitted at the sametime so that the cabinet can be located in the required positionon the castors and then the adjustable feet can be used for thefinal positioning.
Part Number Description
540-445 Castors, set of 4
540-446 Jacking Feet, set of 4
Part Number Description
540-530 600mm Castor / Feet Support Unit
540-532 800mm Castor / Feet Support Unit
Part Number Description
540-302 Roof type, 2 Way Fan
540-304 Roof type, 4 Way Fan
IVU3 19" Rack type, 3 Way Fan
IVU6 19" Rack type, 6 Way Fan
Vertical Cable Management Panels
Vertical cable management panels are available for 800mmwide cabinets, they are fixed to the side of each mountingprofile and provide a method for vertical patch cordmanagement either within a single cabinet or throughout a bayof racks. For enhanced management, optional hoops can beeasily fitted at regular intervals to the panels.
page 9
Quick Fit Cable Hoops
These fit to the 19" mounting rails in any 800mm wide Excelcabinets. They offer approximately 6500sq mm of cablingspace. Can be positioned to suit individual cabling applications.
Features● Attach to vertical management panels supplied in 800 wide
Excel cabinets● Supplied in pairs● Designed to maximise cable management facilities● Does not compromise the 19" mounting facility● For 800 wide Excel cabinet only
Excel Baying Kit
The bolt-together kit is used to secure cabinets together in abay or suite. Kit comprises four brackets and associated fixings.
Features● Easy to fit● Supplied in sets of four
Accessories
Part Number Description
540-493 22u Vertical Cable Management Panels (Pair)
540-494 27u Vertical Cable Management Panels (Pair)
540-495 39u Vertical Cable Management Panels (Pair)
540-496 42u Vertical Cable Management Panels (Pair)
540-497 47u Vertical Cable Management Panels (Pair)
Part Number Description
540-448 Excel Baying Kit to suit all Excel Floor Cabinets
Part Number Description
540-488 Quick Fit Hoops (Pair)
Excel 1u 19" Brush Panel
This panel is suitable for fitting below patch panels to allowcable entry into the rack. The rear cable support sectionincorporates holes for securing cables.
Features
● Brush protected cable entry● Wide cable slot to allow spacing of cables● Cable support facility
Excel Brush Cover Top Entry
Cable entry top panel fitted with brush strips to restrict particleingress. Dimension: 450 x 200mm.
Roof Infill Panel
For use when either 2 x 2 way fan trays are fitted or when 1 x 2 way fan and 1 x brush panel are fitted in the roof. Infill panel will cover 50mm gap.
Cable Tray
The lightweight design makes installation and cable feedquick and easy.
Features
● Available in a range of sizes
● 150mm wide
page 10 Accessories
Part Number Description
540-487 1u 19” Brush Panel
Part Number Description
540-298 Brush Cover Top Entry
Part Number Description
540-498 Roof Infill Panel
Part Number Description
540-291 22u Cable Tray
540-288 27u Cable Tray
540-289 32u Cable Tray
540-294 39u Cable Tray
540-296 42u Cable Tray
540-297 47u Cable Tray
Power Distribution Units
An extensive range of professional grade power distributionunits designed specifically for the 19" electronic enclosuremarkets. Offered with a comprehensive range of socket choiceto suit wall mounting or floor standing cabinets.
Cable Management Bars
Cage Nuts
Cage nuts are used to fit equipment to the 19" profiles.
A wide range of 19” Vertical Cable Management bars areavailable in both Black and Beige.
Features
● Metal or Plastic Management Hoops
page 11
● Horizontal and Vertical Hoops
● Available in Black or Beige
Features
● Suitable for both vertical andhorizontal applications
● Robust all aluminium housing
● Illuminated & fully shroudedswitch
● Integral pull-out 19" mounting brackets
● Clip feet for side, offset or end mounting
● External earth facility
Accessories
Fully shroudedswitches remove thepossibility ofaccidental switching.
Integral pull-out 19"mounting bracketsfit standard 19"mountings.
Clip feet for sidemounting. In thisposition an offsetmounting position isachieved to clearadjacent equipment.
Clip feet for endmounting. By slidingthe feet out andlocking into each endcap, traditional endmounts are provided.
Part Number Description
D13-4 4 Way Universal Power Strip
D13-5 5 Way Universal Power Strip
D13-6 6 Way Universal Power Strip
D13-8 8 Way Universal Power Strip
D13-10 10 Way Universal Power Strip
D13-12 12 Way Universal Power Strip
Part Number Description
100-580 1u Beige Bar, 4 Vertical Metal Hoops
100-582 1u Black Bar, 4 Vertical Metal Hoops
100-584 1u Beige Bar, 5 Vertical Plastic Hoops
100-586 1u Black Bar, 5 Vertical Plastic Hoops
Part Number Description
M6CNU Cage Nuts, pack of 50
Mayflex, a privately owned company, began tradingback in 1917. Over the years it has become one ofthe UK’s leading distributors of structured cabling
systems as well as a vast range of associatednetworking products. The head office is based
in Birmingham with regional offices located in the City of London and Scotland.
Call sales on 0800 75 75 65Freefax 0800 389 2270 Email [email protected]
Excel House, Junction Six Industrial Park, Electric Avenue, Birmingham B6 7JJ
MF005_12/03