network high speed dome quick start guide - ptz
DESCRIPTION
NETWORK HIGH SPEED DOME QUICK START GUIDE.pdfTRANSCRIPT
-
STEP3 STEP4 STEP4ACCESSING IP DOME ON THE INTERNET WITH BROWSER LOGIN AND OPERATION LOGIN AND OPERATION
User can do many operations like play, stop,
record, capture, talkback, full-screen view,
audio monitor, buffer, show alarm, etc, and
cruise, scan and other PTZ control.
2b. Playback
Click Playback button in menu bar to enter
the video playback page.
User can search for recording files or capture
images in local PC or storage device on the IP
Dome according to search criteria: select the
file position, type, a certain date and time, then
click Search button, the searched files
information will be displayed in the Files List.
User can carry out other relevant operations,
such as playback, download, etc.
2c. Configure
User can set up the system parameters in this
mode. Here are several important settings:
1 Network Configure
Go to Configure Network Configure to get
and modify the IP address,device port and
other parameters,enable DHCP function to
obtain IP address from the router automatically.
Record Configure2
Go to Configure Record Configure to set
storage rule, record stream and record
schedule.
Alarm Configure3
User can set the detection schedule of motion
detection and I/O alarm, and set motion area
and alarm linkage like linkage alarm output,
linkage recording / capture, sending E-mail,
FTP uploading, etc.
Basic Parameters Configure4
Go to Configure Stream Configure to set
stream type, frame rate, resolution, etc.
Go to Configure Time parameters to set
date, time, time zone, and synchronize time
with PC.
Go to Configure OSD to set whether to show
the system time and channel name, adjust the
display position and color.
Go to Configure Advanced Configure to set
capture schedule, PPPoE dial-up, DDNS service,
mailbox alarm, FTP upload, user management,
cruise, ISP, etc.
Click OK button to save the setting; when the
setting is not saved, click Refresh button to
return to the previously saved parameters;
when the setting has been saved, click Refresh
button to query whether the setting is successful.
Click Log button to enter the log search page.
User select the log type, start date and end date,
click Refresh button to search log, the searched
log information will be displayed in the log
information list.
2d. Log
Note: Please refer to the user manual for the detailed
operations like mobile phone remote view.
Note: Please allow a little time for the DDNS service
to update with your new DDNS address. This
is normal for the DDNS system.
Open IE browser and enter the hostname
(e.g. http://myipcam2.no-ip.org) in the address
bar to access it.
4.Accessing your IP Dome remotely.
Note: Please refer to the user manual for other
detailed operations.
STEP4 Login and Operation
1.User Login
Select the system language, input user name,
password and port number, click Login button
to enter into the main interface.
2.Operation
2a. Live Video
Network High Speed Dome
Camera User Manual
Network High Speed Dome
Camera User Manual
-
STEP1 Getting Started
STEP1 STEP2 STEP2 STEP3 GETTING STARTED
LAN
Power Supply
Audio Output
PGND
Alarm Input & Output
Reset Button
Video Output
Monitor
24V AC
Audio Input
Router
Alarm
Note: The picture above is for reference only;
please regard the actual product as the
truth.
1.Connecting the monitor's video cable to
the video output port on the Network
High Speed Dome Camera
(IP Dome for short).
2.Connecting an Ethernet cable from router
to IP Domes LAN port.
STEP 2 Accessing IP Dome Locally
with Browser
ACCESSING IP DOME LOCALLY
WITH BROWSER
1d. Click IP address to open the URL of IP Dome,
or you can open IE browser and enter the IP
address of IP Dome in the address bar to
access it.
Note: The IP Dome and your PC must be on the
same network segment. You can change
the IP address of IP Dome.
2a. Go to http://www.no-ip.com and click sign-up.
2.Register domain name (DDNS) on the
third party website (take NO-IP for
example).
2b. Fill in your username, password, email
and your host name. Please login your
email and active your account. The
host name will be your IP Camera
address.
Go to Configure Advanced Configure
DDNS Configure to enable DDNS function, input
host domain,user name and password of your
account at no-ip.com, choose DDNS-3322 as
domain server, then click OK button.
3.Enable DDNS on the IP Dome.
STEP 3 Accessing IP Dome on the
Internet with Browser
1a. Accessing your router by entering the
gateway address, e.g. http://192.168.1.1;
1.Port forward.
1c. Forward Web Port (default is 80) and
Device Port from local IP address to
internet.
1b. Find the option called port mapping or port
forwarding;
2a. Click Download ActiveX to download the
ActiveX Control;
2.Download and Install ActiveX.
You need to install ActiveX Control when you
access IP Dome for the first time through IE
browser.
2b. Install the downloaded file WebClient;
2c. Reopen IE browser after ActiveX installation
completes, enter the IP address of IP Dome
to turn to login interface.
ACCESSING IP DOME LOCALLY
WITH BROWSER
Note: Please visit www.portforward.com to look
up port forwarding guides for various
routers.
ACCESSING IP DOME ON THE
INTERNET WITH BROWSER
3.Connecting the power.
Note: For more installation details, please refer
to user manual.
Once your IP Dome is connected to network,
you can access it by using PC, Iphone, Ipad,
Android phone or tablet.
Default Parameters
IP Address: 192.168.1.10
User Name: admin
Password is blank
Device Port: 5000
WEB Port: 80
Net Mask: 255.255.255.0
Gateway: 192.168.1.1
RTSP Port: 554
ONVIF Port: 12001
1b. Run the SearchTool ;
1c. Click search button to search for IP
Domes on the intranet automatically;
1.Using the SearchTool.
1a. Install the SearchTool from Disk
(Included);
1 2