network-appliance.testkings.ns0-511.v2016-12 … · exam a question 1 a customer wants to maintain...

http://www.gratisexam.com/

NS0-511

Passing Score: 800Time Limit: 0 min



Exam A

QUESTION 1A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system.Which SnapMirror policy and relationship type should be used?


A. MirrorAndVault/Relationship Type DPB. MirrorAndVault/Relationship Type XDPC. MirrorAndVault/Relationship Type TDPD. MirrorAndVault/Relationship Type LS

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation: (https://library.netapp.com/ecmdocs/ECMP1610202/html/snapmirror/policy/create.html)

QUESTION 2You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space.Which three actions are available to perform from the OCUM events detail Web page? (Choose three.)

A. Add a note to the event.B. Create a job to move the FlexVol.C. Acknowledge the event.D. Increase the capacity of the FlexVol.E. Mark the event as “resolved”.

Correct Answer: CDESection: (none)Explanation

Explanation/Reference:


Explanation:(https://library.netapp.com/ecm/ecm_download_file/ECMP1141205)

QUESTION 3You are installing a MetroCluster for clustered Data ONTAP consisting of FAS8080s.How are the high-availability interconnects cabled?

A. High-availability interconnects are only needed for the remote connections between the nodes.B. High-availability interconnects are cabled both locally and remotely between the nodes.C. High-availability interconnects between the nodes are not needed.D. Each high-availability pair controller is cabled to its local partner.


Explanation/Reference:Explanation:(https://library.netapp.com/ecm/ecm_download_file/ECMP1610209)

QUESTION 4You have downloaded a user-created OnCommandWorkFlow Automation (WFA) content pack from the NetApp communities Web site and want to import it intoyour environment.Which two statements are true in this scenario? (Choose two.)

A. The file must be imported through the WFA Web portal.B. You must unpack the zip file before importing it.C. The .exe file can be run directly on the WFA server.D. The .obj file can be placed directly in the content folder on the WFA server.

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1644817/html/GUID-6E4212DC-A5AF-407D-980D-E3475E7B216E.html and https://library.netapp.com/ecm/ecm_get_file/ECMP1397247)

QUESTION 5


A customer is running clustered Data ONTAP 8.3 and wants to restore 15 files from a secondary SnapVault destination. The customer uses the commandsnapmirror restore -file-list.Which two statements are true about this operation? (Choose two.)

A. The maximum number of files that you can select at the same time is one.B. The maximum number of files that you can select at the same time is eight.C. You can choose any destination volume for the restore, as long as the volume type is RW.D. You can choose any destination volume for the restore, as long as the volume type is DP.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1610202/html/snapmirror/restore.html)

QUESTION 6You have a NAS volume containing 100 GB of data and daily change rate of 10%. You want to keep seven daily Snapshot copies.What is the minimum size for the volume?


A. 170 GBB. 100 GBC. 110 GBD. 220 GB

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196784/html/GUID-3AA3830F-FA54-4BA1-8309-AF0809B1CF73.html)


QUESTION 7You are in a SnapProtect v10 solution environment creating a new subclientwith NAS data.Besides the subclient name, what other information is mandatory? (Choose three.)

A. the Snap EngineB. the backup content pathC. the storage policyD. the backup scheduleE. the retention policy

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:(http://docs.snapprotect.com/netapp/v10/article?p=products/windows/snap/config_basic.htm)

QUESTION 8You want to perform a health check of the MetroCluster synchronization status.Which two actions should you perform? (Choose two.)

A. Run the MetroCluster Health Check tool from your administration host.B. On the cluster shell, use the metrocluster replication show command.C. InOnCommand System Manager, go to the Cluster in the MetroCluster section.D. On the cluster shell, use the metrocluster check run command.E. InOnCommand Unified Manager, go to the Cluster in the MetroCluster tab.

Correct Answer: BESection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1552961/html/GUID-6650CB54-0900-49EE-97CB-94BA271264D2.html)

QUESTION 9When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow?


A. numerically 1-to-999B. left to right, top to bottomC. largest to smallestD. alphabetically A-to-Z



QUESTION 10Given the command shown below:snapmirror policy add-rule –vserver vs1 –policy policy –snapmirror-label weekly –keep 52What does this command do?


A. It retains 52 weekly Snapshot copies on the destination volume.B. It retains 52 weekly Snapshot copies on the source volume.C. It retains 52 weekly Snapshot copies on the source storage virtual machine.D. It retains 52 weekly Snapshot copies on the destination storage virtual machine.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1610205/html/GUID-17AF8977-7CC1-48E9-BC3E-8D8F177128C6.html)

QUESTION 11On a Windows host, you want to make a consistent database backup of a physical SQL server where the database is on iSCSI-connected LUNs on a clusteredData ONTAP 8.3 system.


In addition to SnapDrive for Windows, which three NetApp software products should be installed to satisfy this requirement? (Choose three.)

A. Microsoft iSCSI Software InitiatorB. OnCommand Workflow AutomationC. OnCommand Unified ManagerD. iSCSI Host UtilitiesE. SnapManager for SQL

Correct Answer: ADESection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1649831/html/GUID-C4DE2F10-AD73-4FA7-B99D-A76D1E0CEF2C.html)

QUESTION 12You want to have a NetApp FlexVol that can both grow and shrink dynamically as required by current capacity needs.Which settings will enable this feature?

A. This can be enabled with the grow_shrink volume autosize mode.B. This can be enabled with the growvolume autosize mode.C. This can be enabled with the modify volume efficiency option.D. This can be enabled with the inline-compression volume efficiency option.


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-ECE453FE-D158-4BDA-9851-6B8780474E11.html)

QUESTION 13The customer has experienced a disaster at their primary data center. You have implemented a SnapMirror relationship to meet their needs. You have performedthe steps to make the destination volume read/write accessible to the clients.Which three actions should your consider doing while the customer makes the necessary repairs to their data center? (Choose three.)

A. Implement a Snapshot copy schedule on the destination volume.


B. Delete all Snapshot copies on the destination volume in preparation for a resynchronize operation.C. Verify that the destination volume has the same settings as the source volume for compression.D. Verify that the destination volume has the same settings as the source volume for deduplication.E. Delete all Snapshot copies on the source volume in preparation for a resynchronize operation.



QUESTION 14You want to configure a SnapMirror transfer throttle to consume less network bandwidth.In the output of the snapmirror show command, which three statistics would you use? (Choose three.)

A. Last Transfer TypeB. Last Transfer SizeC. Total Transfer Time in SecondsD. Last Transfer ErrorE. Last Transfer Duration

Correct Answer: BCDSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1610202/html/snapmirror/show.html)

QUESTION 15How are the FC-VI links cabled in MetroCluster for clustered Data ONTAP?



A. controller A is cabled to FC switch A, controller B has both cabled to FC switch BB. directly to the corresponding local HA partnerC. one cable to each of the two local FC switchesD. directly to the corresponding remote HA partner

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1636017/html/GUID-EAED9FD0-918E-4276-A4E4-D3513CB52665.html)

QUESTION 16A customer wants to convert some SnapMirror relationships to SnapVault relationships.How would this be accomplished without creating a new baseline?

A. Break and delete the relationship followed by SnapMirror resync.B. Break the relationship followed by SnapMirror delete.C. Break and delete the relationship followed by SnapMirror resync with relationship type XDP.D. Break the relationship followed by SnapMirror modify.


Explanation/Reference:Explanation:(https://kb.netapp.com/support/index?page=content&id=1010804)

QUESTION 17What are two NetApp data protection solutions? (Choose two.)

A. RecoverPointB. SnapMirrorC. TimeFinderD. SnapVault



Explanation/Reference:Explanation:(http://www.storagefreak.net/2013/11/snapvault-vs-snapmirror-what-is-the-difference)

QUESTION 18You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date.From My AutoSupport, which report would you use?

A. Transition AdvisorB. VisualizationC. Upgrade AdvisorD. Event Viewer


Explanation/Reference:Explanation:(http://www.netappgrid.com/get-fit-14_Promo/MLCS/assets/pdfs/GuidetoMyAutoSupport.pdf)

QUESTION 19A customer is running clustered Data ONTAP 8.3 on primary and secondary clusters. The customer is using SnapVault to back up volumes between the clusters.The customer has good Data ONTAP 7-Mode knowledge and needs to set up two new SnapVault relationships between the clusters on a weekly schedule.Which solution would you recommend to satisfy this requirement?

A. Use the node shell command line interface.B. Use the system shell command line interface.C. Use OnCommand Workflow Automation.D. Use OnCommand System Manager.





QUESTION 20What are three OnCommand Workflow Automation building blocks? (Choose three.)

A. dictionary entriesB. filtersC. branchesD. templatesE. icons

Correct Answer: ABDSection: (none)Explanation


QUESTION 21You are implementing version flexible SnapMirror in a clustered Data ONTAP 8.3 environment. Which type of SnapMirror policy would be used?


A. sync-mirrorB. version-flexibleC. async-mirrorD. vault



Explanation/Reference:Explanation:https://library.netapp.com/ecm/ecm_download_file/ECMP1610205

QUESTION 22You and other administrators are in the habit of creating FlexClone LUNs and then not deleting them when they are no longer needed.What should you do to help manage space utilization?

A. Use the flexclone split command.B. Use the volume snapshot autodelete modify command.C. Configure FlexClone LUNs to automatically be marked for deletion.D. Configure FlexClone LUNs to automatically delete when they are one minute older than 30 days.


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1366832/html/volume/snapshot/autodelete/modify.html)

QUESTION 23Network bandwidth between your the primary and secondary sites is limited. You believe that data compression combined with volume SnapMirror would help solvethis problem.In this scenario, which statement is correct?

A. Data compression can be enabled on the source storage system and will remain intact through SnapMirror.B. A SnapMirror source cannot be compressed but the destination volume can be.C. Data compression and SnapMirror are incompatible.D. Compression can be enabled independently between the source and the destination.


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-1B71B7D7-A6D1-4A0D-83D8-C5364C9FAABD.html)

QUESTION 24


Your customer complains that their NDMP application can back up data only on a specific NetApp cluster node. You know the customer has recently upgraded alltheir cluster nodes to clustered Data ONTAP 8.3.What would you recommend to solve their NDMP problems?

A. Have the customer verify their firewall configuration to allow the NDMP control connection to pass from one cluster node to the other.B. The NDMP environment variables should be configured to allow the Node-Scoped behavior to backup data on any cluster node.C. Have the customer implement a scripted solution to move their NDMP data and control connections to the necessary cluster node.D. Change their NDMP configuration from Node-Scoped to SVM-Scoped mode.



QUESTION 25Which attribute does Data ONTAP use the identify Snapshot copies between primary and secondary FlexVol volumes in a SnapVault relationship?

A. FlexVol nameB. Snapshot prefixC. SnapMirror policyD. SnapMirror label


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1366833/html/GUID-D70AE6D3-4104-4763-A2B5-FF6D4E0BF921.html)

QUESTION 26A customer is using SnapVault to backup Snapshot copies from a primary volume to a secondary volume on a clustered Data ONTAP system. The retention on thesecondary volumes must be 90 days. Volume autosize and SnapShotAutoDelete have been enabled for all secondary volumes.Which two settings will satisfy this requirement? (Choose two.)

A. Modify the secondary volume with the –autosize–reset true command.B. Modify the secondary volume with the –space-mgmt-try-first snap_delete command.


C. Modify the secondary volume with the –autosize-increment 5GB command.D. Modify the secondary volume with the –space-mgmt-try-first volume_growcommand.

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1610202/html/volume/modify.html and https://library.netapp.com/ecmdocs/ECMP1610202/html/volume/autosize.html)

QUESTION 27What are two capabilities enabled by Snapshot copies? (Choose two.)


A. Change the volume language of a secondary Snapshot copy.B. Recover previous versions of a file that was deleted.C. Write to the Snapshot copy.D. Create a clone of a FlexVol volume.


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-8DCD4B76-DE5D-42F6-AA29-EC6EFA5A7FA6.html and https://library.netapp.com/ecmdocs/ECMP1196891/html/GUID-180230B3-BAFB-4A91-873E-2B1EBFB7EF1A.html)

QUESTION 28You must back up and replicate a Microsoft SQL server using SnapProtect in your clustered Data ONTAP environment.Which three components must be correctly installed and configured? (Choose three.)

A. SnapDrive for WindowsB. OnCommand Workflow Automation


C. OnCommand Unified Manager 6.0D. SnapProtect v10E. SnapProtectiDataAgent

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:Explanation:(http://www.netapp.com/it/communities/tech-ontap/tot-snapprotect-1205.aspx)

QUESTION 29The primary and secondary clusters are fully configured. You want to set up an inter-cluster SnapMirror relationship.Which two actions are prerequisite to accomplishing this task? (Choose two.)

A. The SVMs must be peered.B. The primary and secondary clusters must be peered.C. The Snapshot schedule must be configured.D. NDMP must be enabled.

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecm/ecm_get_file/ECMP1242596)

QUESTION 30Your customer wants to implement a SnapVault relationship, but is concerned that the initial transfer will use up all of their network bandwidth.Which solution should you recommend to the customer?

A. Use the SMTapefunctionality to back up the source volume to tape and use the tape to transfer the base snapshot copy to the destination volume.B. Set up a SyncMirror relationship to a NetApp controller in the same data center, than ship the controller to the destination site.C. Manually copy each directory from the source volume to the destination volume during times when the network utilization is low.D. Enable volume efficiency on the destination volume.

Correct Answer: A


Section: (none)Explanation


QUESTION 31You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial dat

A. Although the data is critical, it only changes on a monthly basis.Using OnCommand System Manager, which two actions would change the frequency of the SnapMirror updates? (Choose two.)

B. Select or create a different schedule.C. Edit the parameters of the default schedule.D. Select or create a different policy.E. Edit the parameters of the default policy.

Correct Answer: CDSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1610202/html/snapmirror/policy/create.html)

QUESTION 32In which two scenarios would a SnapMirror policy be applied? (Choose two.)


A. a log fileB. a storage virtual machineC. a data protection mirror relationshipD. a SnapVault relationship


Correct Answer: CDSection: (none)Explanation

Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196819/html/GUID-240A815A-C906-49CF-8EEC-839C8DDE0FF3.html)

QUESTION 33You have completed the baseline copy for a new inter-cluster SnapMirror relationship.How do you verify the baseline without making the destination volume writable?

A. Create Snapshot copy and a FlexClone volume clone of the SnapMirror destination volume.B. Create a FlexClone volume clone of the SnapMirror source volume and then verify the clone.C. Break the mirror and verify the destination volume online.D. Break the mirror and verify the source and destination volumes.


Explanation/Reference:Explanation:(https://library.netapp.com/ecm/ecm_get_file/ECMP1141097)

QUESTION 34You want to ensure that a particular version of SnapManager for SQL is supported in a configuration. Which three components need to be verified in the Interoperability Matrix? (Choose three.)

A. OnCommand Unified Manager versionB. SnapDrive versionC. FC HBA firmwareD. SnapManager versionE. Data ONTAP version

Correct Answer: BDESection: (none)Explanation




QUESTION 35You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?

A. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unixto take the Snapshot copy of the database LUN.B. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.C. Use SnapManager for Oracle to take the Snapshot copy backup.D. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1552620/html/GUID-2D05907F-D03A-4B53-BCB6-D52CBEC3509A.html)

QUESTION 36Which command shows a volume’s space usage, including metadata, within the aggregate?

A. volume show-footprintB. volume show-spaceC. volume showD. aggregate show


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1366832/html/volume/show-space.html)

QUESTION 37Click the Exhibit button.


You have a SnapProtectv10 environment as shown in the exhibit.What are the two default Snapshot copies created automatically after creating a Storage Policy. (Choose two.)

A. Primary (Tape)B. Primary (Classic)C. Primary (NetApp)D. primary (Snap)


Explanation/Reference:Explanation:(http://community.netapp.com/fukiw75442/attachments/fukiw75442/fas-data-ontap-and-related-plugins-articles-and-resources/24/1/SnapProtect+Overview+and+Design+Considerations+v48_1+2_052611.pdf)

QUESTION 38You want to schedule daily differential backups for vault backups and weekly full backups to tape using SnapProtect.Which policy would you use to configure the Primary (Classic) tape backup?


A. provisioning policyB. protection policyC. schedule policyD. storage policy


Explanation/Reference:Explanation:(http://community.netapp.com/fukiw75442/attachments/fukiw75442/fas-data-ontap-and-related-plugins-articles-and-resources/24/1/SnapProtect+Overview+and+Design+Considerations+v48_1+2_052611.pdf)


QUESTION 39You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume.In this scenario, what is transferred?

A. serial numberB. UUIDC. selected Snapshot copiesD. LUN mapping status


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196784/html/GUID-BD79A1D5-FAD5-4547-851F-00849E6AD64D.html)

QUESTION 40You are calculating transfer time for SnapMirror replication between two NetApp clusters.Which three factors should be included in your consideration? (Choose three.)

A. data size to transferB. SnapMirror scheduleC. TCP window sizeD. latency between clustersE. retention policy


Explanation/Reference:Explanation:(https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-7CA4731B-B567-4050-870E-A1E076604A38.html)

QUESTION 41In a clustered Data ONTAP environment running on Data ONTAP 8.2, the customer is using SnapVault to back up data from a primary to a secondary cluster.Policies, Resource Pools, and Storage Efficiency are configured in OnCommand Unified Manager 6. OnCommand Workflow Automation takes care of thesecondary provisioning. The customer wants to update the SnapMirror Policy with a custom Snapshot copy label.


What should be done to make sure that the Snapshot copies will be transferred to the secondary cluster?

A. Add the SnapMirror label in the efficiency policy of the secondary system.B. Re-initialize the SnapMirror relationship and transfer a new baseline.C. Add the SnapMirror label in the SnapMirror policy of the secondary system.D. Re-initialize the SnapMirror relationship without transferring a new baseline.




network-appliance.testkings.ns0-511.v2016-12 … · exam a question 1 a customer wants to maintain...

Documents