nepal electricity authority -...

NEPAL ELECTRICITY AUTHORITY

(An Undertaking of Government of Nepal)

Project Management Directorate

SASEC: Power System Expansion Project

KALIGANDAKI TRANSMISSION CORRIDOR PROJECT

BIDDING DOCUMENT

FOR

Procurement of Plant for 220/132 kV New Butwal Substation

(Design, Supply and Install)

Single-Stage, Two-Envelope

Bidding Procedure

Issued on:

Invitation for Bids No.: ICB-PMD-KGTCP–073/74-03

ICB No.: ICB-PMD-KGTCP-073/74-03

Employer: Nepal Electricity Authority

Country: Nepal

VOLUME –III OF III

May 2017

Kaligandaki Transmission Corridor Project

Project Management Directorate

Satungal – Bauthali Chowk Marga,

Chandragiri Municipality, Matatirtha, Kathmandu, Nepal

Telephone: + 977-1- 5164099, 5164091

Facsimile number: +977-1-5164091

Electronic mail address: [email protected],

[email protected]

Telephone: +977-1-5164091, 5164099 Fax: +977-1-5164091

TENDER NO.: ICB-PMD/KGTCP-073/74-03 SCHEDULE - 1PAGE 1 OF 61

Schedule No.1: Plant and Equipment including Mandatory Spares to be supplied from abroad FC: Foreign Currency

LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC

Currency# Unit Rate Amount

1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

I-A 220/132kV New Butwal SubstationPart-A : EMPLOYER ASSESSED QUANTITIES

A.1 POWER TRANSFORMER

A1.1 POWER TRANSFORMER

A1.1.1 3-Ph Autotransformers

a) 100MVA , 220/132/11 KV, 3-phase

Autotransformer (Excluding insulating oil)

Nos. 1

b) Insulating oil for 100MVA , 220/132/11 KV, 3-

phase Autotransformer(* 1Lot = Oil for

1Autotransformers )

Lot* 1

A1.2 Testing & Maintenance Equipments

a) Oil Storage Tank No. 1b) Transformer Oil Filtration plant (6KLPH) No 1A2 LT TRANSFORMER

1.0 630 kVA,11/0.400kV Nos 2

B 245 kV equipment

1.0 245 kV Circuit Breakers (3-Phase) with support

structure

a 1600A, 40KA Nos 3b 2500A, 40KA Nos 3c 3000A, 40KA No 1


NEPAL ELECTRICITY AUTHORITYPROJECT MANAGEMENT DIRECTORATE

Country of Origin

220/132 New Butwal Substation

Unit QuantityFC

Item No. Item description

Estimated

CIP Project Site Including insurance, clearing, forwarding and

transportation to site (Excluding Taxes and Duties applicable in

Nepal)

220/132 kV NEW BUTWAL SUBSTATION KALIGANDAKI TRANSMISSION CORRIDOR PROJECT



LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

2.0 245kV Isolator (3-phase)-Double Break

a 1600A, 40 KA, Isolator with one E/S Nos 3b 2500A, 40 KA, Isolator with one E/S Nos 3c 1600A, 40 KA, Isolator with two E/s Nos 3d 2500A, 40 KA, Isolator with two E/s Nos 3e 1600 A, 40KA, Tandem Isolator without E/S Nos 6f 2500 A, 40KA, Tandem Isolator without E/S Nos 5g 3000A, 40 KA, Isolator with two E/s Nos 2

3.0 245 kV Current Transformer (1-Phase)

a 1600A, 40KA with 120% extended current rating Nos 9b 1600A, 40KA with 150% extended current rating Nos 9c 3000 A, 40KA with 120% extended current Nos 3

4.0 245 kV Capacitive Voltage Transformer (1- Phase)

a 4400 pF Nos. 18

5.0 216 kV Surge Arrestors (1-phase) Nos. 15

6.0 245 kV Bus Post Insulator Nos 90

C 145 kV equipment

1.0 145 kV Circuit Breaker (3-Phase) with support structure

a 1250A, 31.5 kA Nos 9

2.0 145kV Isolator (3-phase)-HDB

a 1250A, 31.5 KA, Isolator with one E/S Nos 8b 1250A, 31.5 KA, Isolator with two E/s Nos 10




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

c 1250A, 31.5 KA, Tandem Isolator without E/S Nos 15

3.0 145 kV Current Transformer (1- Phase)

a 800A, 31.5 kA with 120% extended rating Nos 27

4.0 145 kV Surge Arrestors

a 120 kV Surge Arrestors (1- Phase) Nos 21

5.0 145 kV Bus post insulators Set 100

D1 36kV EQUIPMENT

1.1 36 kV, 400A, 25kA Circuit Breaker (3-phase) with

support structure

No. 1

1.2 36 kV, 400A, 25kA Isolators with earth switch (3-

phase, DBR type)

No. 1

1.3 630kV, 400A, 25 kA with 120% extended rating

CT.

Nos. 3

1.4 36kV PT.(1-phase) Nos. 3

1.5 36 kV BPI (1-phase) Nos. 6

D.2 11kV Equipments

1.1 11 kV, 400A Isolators with out earth switch (3-

phase, DBR type)

No. 1


1.3 11 kV BPI Nos. 3

1.4 11 kV, 400Amp HG Fuse along with support

insulator (1-phase)

Nos. 3

D.3 11 kV HT cable alongwith associated accessories Km 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

E RELAY PANELS (WITH AUTOMATION)

1.0 220 kV

a Circuit Breaker Relay Panel

i With Auto Reclose Set 5ii With out Auto Reclose Set 2

b Line Protection Panel Set 4d Transformer Protection Panel (For both HV & MV side) Set 1e Bus Bar Protection Panel Set 1

2.0 132 kV


i With Auto Reclose Nos. 7

ii With out Auto Reclose Nos. 2

b Line Protection Panel Nos. 6

c Bus Bar Protection Panel No 1

F COMMON EQUIPMENTS

1.0 Relay Tool kit No 12.0 Time synchronisation equipment No. 1G SUBSTATION AUTOMATION

G.1 Complete Substation Automation System (SAS) for

substation including hardware and software for the

substation & remote control stations alongwith associated

equipments for the following bays as per Technical

Specification

a Main bays to be automated

i 220 kV system Bay Nos 7ii 132 kV substation Bay Nos 9

v) BCU for controlling & monitoring of Auxilary

System

Set 1

H PLCC, Teleprotection & communication Equipments




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

(i) 220 kV system

(a) Digital Protection Coupler Nos 4(b) Digital Protection Coupler(for other end) Nos 4(ii) 132 KV System

a Line Traps

i 1250A, 0.5mH, 31.5kA(132kv) Nos 6

b Bus Post Insulators for Line Traps

i 132 kV BPIs Nos 18

c1 Coupling device (New Butwal end) Nos 6

c2 Coupling device (othe end) Nos 6

d1 Protection Coupler(New Butwal end) Nos 6

d2 Protection Coupler(for other end) Nos 6

e1 Carrier Equipment (for speech+protection+Data)(Analog

type)(New Butwal end)

Nos 12

e2 Carrier Equipment (for speech+protection+Data)(Analog

type)(Other end)

Nos 12

f HF cable Km 4

g PABX with following configuration as per TS Set 1i) 2 wire subscriber interface card with capacity 32 local

subscribers (along with 32 nos. Instruments)

ii) 4 wire E & M interface card with capacity 8 nos. trunks (For

PLCC)

iii) E-1 interface with 2 trunks G-703

iv) 2 wire interface with 1 trunk (For PSTN)

h Testing & Maintenance equipment (print test kit only) Set 1k 4 wire telephone equipment No 1

I LT Switchgear (As per Technical specification)

a 415V Main switchboard Set 1b 415V ACDB Set 1c 415V MLDB Set 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

d 415V Emergency LDB Set 1e 220V DCDB Sets 2e 48V DCDB Sets 2J Batteries

a 220V

i 600 AH Nos 2b 48V

i 600 AH Nos 2

K Float Cum Boost Battery Charger

a 220V Float Cum Boost Battery Charger

i 80A/80A Nos 2

b 48V Float Cum Boost Battery Charger

i 60A60A Nos 2

L Diesel Generator with control Panel

a 50 KVA Set 1b 25 KVA Set 1

M Fire Protection System

a Portable /Trolley/Wheel mounted extinguishers

i 9 litre water type Nos 5ii 50 litre foam type Nos 2iii 4.5 kg CO2 type Nos 13iv 4.5 kg Dry Chemical Power (DCP) type Nos 5

b Smoke detection system Set 1c Fire detection and Alarm System Set 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

N Cables along with clamps, glands, lugs and straight

joints etc.

b Power Cables - (1.1kV grade)

i 3.5Cx300 sqmm (XLPE) cable for filter Machine along with

termination arrangement as per TSKM 1

O Air conditioning System for Control room cum

administrative building

a High wall type split AC unit of 2 TR capacity Nos 20

p Fabrication, galvanising and supply of following Steel

Structures including nuts, bolts, all types of washers,

packplates, step bolts and gusset plates including

foundation bolts.

(a) Lattice Structure including Foundation Bolts MT 316

(b) Pipe Structure including Foundation Bolts . MT 80

(c ) Fastners and step bolts.(Nuts,Bolts & Washers) MT 18

Q Communication equipments for Matatirha Substation

(For Location wise breakup, please refer Technical

specification, Chapter 18, (Appendix - A)

1 Transmission Equipment

(i) SDH Equipment ( STM- 4 MADM, upto 3 MSP protected directions)(a) Base Equipment (Common cards, Cross-connect/control

cards, Optical base cards, Power supply cards, power

cabling, other hardware & accessories including sub-racks,

patch cords, DDF etc. fully equipped excluding (ii) and (iii)

below)

No. 2

(ii) Optical Interface/SFP# for

(a) L4.2 Nos. 10(b)

Optical Line Interface Card (To support minimum 150

Kms) Nos. 10




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

(iii) Tributary Cards i E1 Interface card (Minimum 16 interfaces per card ) Nos. 2ii Ethernet interfaces 10/100 Mbps with Layer-2

switching (Minimum 4 interfaces per card.)No. 4

2 Termination Equipment

A1 Drop/Insert Multiplexer

Base Equipment (Common cards, Power supply cards,

power cabling, other hardware & accessories including

sub-racks, etc. fully equipped excluding subscriber line

interface cards)

Nos. 2

A2 Subscriber Line Interface Cards

(a)2 wire (sub/sub) voice channel cards (min 8 channels

per card)

Nos. 2

(b) 4 wire (E&M) voice channel cards (min 8 channels per

card)Nos. 2

(c ) Asynchronous Sub Channels data cards (minimum 4

channels per card)Nos. 2

3 Equipment Cabinets

(a) For Drop/Insert Multiplexer No. 2(b) For SDH Equipment No. 2

4 TMN – Craft Terminal for SDH & PDH Equipments(a) Hardware Set* 1(b) Software Set* 1

5 Main Distribution Frame(100 pairs) No. 2




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

Note# :Optical interface/SFP can be provided with

Optical base card or Control card with the condition

that control card shall not be equipped with more than

one Optical interface/SFP and optical card with not

more than two Optical interface/SFP. However main

and protection channel shall be terminated on separate

cards

Note*: Set shall include all required hardware/software

for complete TMN –Craft Terminal system as specified

in technical specifications.

6 Supply of Safety accessories

i) Safety Helmets Nos. 500

ii) Safety Boots Pairs 350

iii) Hand safety Gloves Pairs 500

iv) Protective eye goggles Nos. 300

v) Construction Life Jackets with trousers Pairs 350

vi) Primary health kit Set 300

vii) Raincoat Set 400

viii) Site Bag Set 400

7 Office Equipment

i) A0 Plotter including all accessories with networking

functionSet 1

8.0 Electrical Measuring & Test Equipment

i) Insulation Resistance Test Kit Set 1

ii) Digital Earth Tester Set 1

iii) Digital Low Resistance Ohm Meter Set 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

iv) Battery Impedance Test Kit Set 1

v) Break Down Voltage (BDV) Test Kit for oil (100 KV) Set 1

vi) Winding Resistance & Turns ratio Test kit Set 1

vii) Fully Automatic Capacitance and Dissipation Factor

(tan delta) test setSet 1

viii) PRIMARY CURRENT INJECTION TEST SYSTEM Set 1

ix) Three phase Relay Test kit Set 1

x) Infra-Red Camera Set 1

9.0 Close Circuit Television (CCTV) Lot 1

Sub-Total Part-APart-B: VENDOR ASSESSED QUANTITIES

A Erection Hardware

Insulator strings, Disc Insulators, Hardware, conductor, Al

tube, bus-bar materials, cable trays, Bay MB, clamps,

spacers, connectors including equipment connectors,

Junction box, earthwire, buried cable trenches/pipe

equipment & lighting, all accessories etc. for the following:

a 220 kV Layout (DMT Layout)

i Line Bay Set 4

ii Transformer Bay Set 1

iii TBC Bay Set 1

iv BC bay Set 1

v Bus work (Three Bays) Set 3

b 132 kV (DMT Layout)

i Line Bay Set 6


iii TBC Bay Set 1

iv BC bay Set 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)


e Earthing and lightning protection including necesaary

connectors/connections, risers etc. complete in all respect (

but excluding LM structures for Lightning protection)

i Earth Conductor (copper) LS 1

ii Earth Rod (copper clad steel) LS 1

iii Equipment for lightning protection LS 1

B Fire Protection System

a Pumping arrangement for HVW system & hydrant system,

complete with all piping, valves, fittings,etc. inside pump

house

i 220/132kV (New) Substation Set 1

b Hydrant system, complete U/G piping and accessories etc.

outside the Pump House.


c HVW spray system, Hydrant system and complete U/G &

O/G piping and accessories etc. out side the pump house

for Transformer :

c.1 Transformer

i 100MVA , 220/132/11 KV, 3-phase Autotransformer Sets 1

d Fire detection & Alarm System for Control Room Building Set 1

e Fire detection & Alarm System for Switchyard panel room

including one number 4.5 kg CO2 type fire Extinguisher for

fire Protection

Set 6

C Illumination System

a Illumination System for switchyard panel room

i 220KV Sets 3

ii 132kV Sets 3




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

b Control room cum administrative building illumination LS 1

c Switchyard lighting LS 1

d Street lighting LS 1

e Transit Camp LS 1

f Township quarter (B-Type, 4 nos) LS 1g Township quarter (C-Type, 4 nos) LS 1h Township quarter (D-Type, 1 nos) LS 1i Car parkings (2 nos) LS 1j Water Tank and Pump LS 1k Guard House LS 1l Corrugated Sheets for Temporary Fencing 8' Tall R. Mtr 1000

m Stone Soling Works LS 1n HDPE Pipe Dia for Weep Holes as necessary LS 1o Geotextile LS 1p Stone Pitching LS 1q Gabion Works LS 1D Air conditioning System

a Air conditioning for S/Y panel room

i 220KV Sets 3

ii 132kV Sets 3

E SUBSTATION AUTOMATION

a Integration of all 220/132/33kV Bays under present scope

with the SCADA of SIEMENS (SINAUT Spectrum) at Load

Dispatch Centre, Kathmandu including supply of Hardware,

Software, accessories etc. as per TS Section Project.

LS 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

G POWER & CONTROL CABLES

b Power Cables(PVC)- (1.1kV grade) LS 1

b Power Cables (XLPE)- (1.1kV grade) LS 1

c Control Cable (PVC)- (1.1kV grade) LS 1

dCable glands, lugs & straight through joints for Power &

Control cables

LS 1

H Social MobiliserPerson

Month

18

IAuto GridPro Software or equivalent as per IEEE Standard

80- 2013 and IS 3043

Nos 1

Sub-Total Part-B

(I) Part-C: Mandatory Spares

(I-A) Mandatory Spare List for Autotransformer

For 100MVA , 220/132/11 KV, 3-phase

Autotransformer

a) Bushing of each rating with metal parts & gaskets

and lifting tools

Set 1

b) Cooler fan with Motor No. 1

c) Buchholz Relay(Main Tank) complete with floats

and contacts

Set 1

d) Local and Remote WTI with sensing device and

contact(each)

Set 1

e) Magnetic oil level gauge No. 1

f) Strarters, contactors,switches & Relays for

Electrical control panels(One ste of each type)

Set 1

g) Remote Tap postion Indiactor No. 1

h) Oil Flow Indicator with Flow Switch Set 1

i) Spare insulating oil to be handed over to Owner

after commisioning for O&M requirement

KL 10




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

(II) 245kV CBi) Complete Pole of circuit breaker including pole column,

interrupter, with driving mechanism and Marshaling Box but

without support structure for

3000A, 40 KA (No. of Pole) No. 1

ii) Rubber gaskets, `O' rings and seals ( for complete

replacement of one pole of CB) Set 1

iii) Trip coils with resistor Nos. 2

iv) Closing coils with resistor Nos. 1

v) Terminal Pads & connectors Nos. 2

vi) Molecular filter Nos. 2

vii) Relays, Power contactors, switch fuse units, limit switches,

push buttons, timers & MCB etc. (1 no. of each type)Set 1

viii) Pressure switches / Density monitor (1 no. of each type) Set 1

ix) Auxiliary switch assembly (for one pole of CB) Set 1

(III) 145kV CBi) Complete Pole of circuit breaker including pole column,



1250A, 31.5 KA (No. of Pole) No. 1


replacement of one pole of CB) Set 1









(IV-a) 36kV CB




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

i) Complete Pole of circuit breaker including pole column,





replacement of one pole of CB) Set

1









(V) 245kV Isolatori) One complete pole including support Insulator, motor

operating mechanism (MOM) with box but excluding

structure

3000A, 40 KA, 1 E/S (no. of pole) No. 1

ii) Copper contact fingers for male & female contacts ( for one

pole of Isolator)Set 2

iii) Open/Close contactor assembly, timers, key interlock push

button switch & auxilliary switches (for one pole of Isolator)Set 1

iv) Limit Switch Nos. 2

v) Terminal Pads & Connectors Nos. 3

vi) Corona shield rings Nos. 3

(VI) 145kV Isolatori) One complete pole including support Insulator, motor

operating mechanism (MOM) with box but excluding

structure




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

1250A, 31.5 KA, 1 E/S (no. of pole) No. 1

ii) Copper contact fingers for male & female contacts Set 2


button switch & auxilliary switchesSet 1

iv) Limit Switch Set 2


(VII-a) 36 kV Isolatori) One complete pole including support Insulator, MANUAL

operating mechanism with box but excluding structure

400A, 25KA, 1 E/S (no. of pole) No. 1

ii) Copper contact fingers for male & female contacts ( for one

pole of Isolator)Set 2


button switch & auxilliary switches (for one pole of Isolator)Set 1



(VII-b) 36kV Isolator(VIII) 245kV CT

i 2000A, 40KA with 120% extended current rating No. 1

ii 2000 A, 40KA with 150% extended current rating No. 1

(IX) 145kV CTi 800A, 31.5 kA with 120% extended rating No. 1

(X-a) CT(36 kV,400A with 120% extended current rating) No. 1

(XI) CVT (245 kV,4400 pF) No. 1

(XII) CVT (145 kV,4400 pF) No. 1

(XIII-a) 36kV PT No. 1

(XIV) 216 SAi) Complete LA No. 1

ii) Surge counter/monitorNos.

5




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

(XV) 120kV SAi) Complete LA No. 1

ii) Surge counter/monitor

Nos.

5

(XVI) 9kV SAi) Complete LA No. 1

ii) Surge counter/monitorNos.

5

(XVII) C&R PANELSi) Transformer protection panel :

a) Transformer differential protection No. 1

b) REF protection relay with non-linear resistor No. 1

c) Directional over current & E/F Protection Relay No. 1

ii) Line protection panel :

a) Numerical distance relay ( 1 no. of each type) Set 1

iv) Breaker Relay panel:

a) Breaker failure relay No. 1

b) Trip circuit supervision relay Nos. 2

c) Auto Reclose relay with check synchronizing relay and dead

line charging relay

No. 1

d) Self reset trip relay (relay of each type) Set 1

e) Hand reset trip relay(relay of each type) Set 1

f) Timer relay(relay of each type) Set 1

g) DC supervision relay(relay of each type) Set 1

h) Flag relays(relay of each type) Set 1

i) Auxiliary relays(relay of each type) Set 1

(XVIII) PLCCi) Set of prints for carrier terminal Set 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

ii) Set of prints for protection coupler Set 1

(XIX) SASi) Bay Control Unit (IED) of each type Set 1

ii) Ethernet Switch of each type Set 1

(XX) BATTERY CHARGER( 220kV)i) Set of control cards Set 1

ii) Set of relays Set 1

iii) Rectifier transformer No. 1

iv) Thyristor/diode Set 1

v) Fuses of Thyristor with indicators Set 6

(XXI) BATTERY CHARGER( 48kV)i) Set of control cards Set 1





(XXII) COMMON SPARESi) Bay unit Module No. 1

ii) 2 wire local subscriber interface card for PABX No. 1

iii) E1 Interface card for PABXNo. 1

(XXIII) Mandatory Spares of Communication Equipments


A SDH Equipment ( STM- 4 MADM, upto 3 MSP

protected directions)

(i) Common cards, Power supply cards, power cabling,

other hardware & accessories (each) Set$$

1

(ii) Optical Interface/SFP for

(a) L4.2 No. 1




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

(b) Optical Line Interface card for STM-4 (to support

minimum 150 kms)** No. 1

(iii) Tributary Cards

(a) E1 Interface card (Minimum 16 interfaces per card) No. 1

(b) Ethernet interfaces 10/100 Mbps with Layer-2

switching (Minimum 4 interfaces per card.) No. 1


Drop & Insert Multiplexer

Common cards, Power supply cards, power cabling,

other hardware & accessories (each)


a)

2 wire (sub/sub) voice channel cards (min 8 channels

per card) No. 1

b)

4 wire (E&M) voice channel cards (min 8 channels per

card) No. 1

c)

Asynchronous Sub Channels data cards, minimum 4

channels per card No. 1

3Pre Connectorized Optical Fiber Patch Cords (10

Mtrs) – Pack of Six Patch Cords Set 1Note$$: One Set means one of each type of

module/unit card etc

Note** : Suitable Optical Interface Card(s) or any

other solution such as SDH equipment with optical

amplifier, wavelength translator or higher

aggregate bit rate SDH equipment may be offered

for the length to meet the link budget requirements

without repeater

A1

1Set$$




LC: Local Currency

Total Amount

(Excluding Taxes

and Duties)

Custom, VAT and

other taxes

FC LC


1 2 3 4 5 6 7 8 = (7) x (5) 9=8 10

Country of Origin

Unit QuantityFC


Estimated



Nepal)

Sub-Total Part-C

Total For Schedule 1: Supply of

220/132kV New Butwal Substation

(Part-A+ Part-B+ Part C)

Note : 1) Bidder is required to quote prices in this Schedule for all the individual items/sub-items.

# Specify currency in accordance with BDS ITB Clause

32.1, Part-I of the Bidding Documents.

* Strike-out whichever is not applicable.

Name of Bidder:

Signature of Bidder:

(Printed Name)

(Designation)

(Common Seal)

2.) The Prices of equipments are inclusive of type test charges except for power transformers mentioned in Sch 4(e).

3.) BOQ given above is indicative only based on the scope of work as given in Employer's Requirements. The quantities mentioned above may undergo change during


TENDER NO.: ICB-PMD/KGTCP/073/74-03 SCHEDULE - 2 PAGE 21 OF 61

Total Amount (Excluding

Taxes and Duties)

Unit Quantity Unit Rate Amount Unit Rate Amount

1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

I-A 220/132kV New Butwal SubstationPart-A : EMPLOYER ASSESSED QUANTITIES


A1.1 POWER TRANSFORMER

A1.1.1 3-Ph Autotransformers

a)100MVA , 220/132/11 KV, 3-phase Autotransformer

(Excluding insulating oil)Nos. 1

b)Insulating oil for 100MVA , 220/132/11 KV, 3-phase

Autotransformer(* 1Lot = Oil for 1Autotransformers )Lot* 1

A1.2 Testing & Maintenance Equipments

a) Oil Storage Tank No. 1b) Transformer Oil Filtration plant (6KLPH) No 1A2 LT TRANSFORMER

1.0 630 kVA,11/0.400kV Nos 2

B 245 kV equipment

1.0 245 kV Circuit Breakers (3-Phase) with support structure



a 1600A, 40 KA, Isolator with one E/S Nos 3b 2500A, 40 KA, Isolator with one E/S Nos 3




Item

No.Item description

Estimated Inland Transportation up to siteEx Factory Price (Excluding VAT)

Schedule No.2: Plant and Equipment including Mandatory Spares Parts to be supplied from within Nepal including Type Test Charges




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



c 1600A, 40 KA, Isolator with two E/s Nos 3d 2500A, 40 KA, Isolator with two E/s Nos 3e 1600 A, 40KA, Tandem Isolator without E/S Nos 6f 2500 A, 40KA, Tandem Isolator without E/S Nos 5g 3000A, 40 KA, Isolator with two E/s Nos 2




a 4400 pF Nos. 18


6.0 245 kV Bust Post Insulator Nos 90

C 145 kV equipment


a 1250A, 31.5 kA Nos 9


a 1250A, 31.5 KA, Isolator with one E/S Nos 8b 1250A, 31.5 KA, Isolator with two E/s Nos 10c 1250A, 31.5 KA, Tandem Isolator without E/S Nos 15







Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description





D1 36kV EQUIPMENT

1.136 kV, 400A, 25kA Circuit Breaker (3-phase) with

support structureNo. 1

1.236 kV, 400A, 25kA Isolators with earth switch (3-

phase, DBR type) No. 1

1.3 630kV, 400A, 25 kA with 120% extended rating CT. Nos. 3



D.2 11kV Equipments

1.111 kV, 400A Isolators with out earth switch (3-phase,

DBR type) No. 1



1.411 kV, 400Amp HG Fuse along with support insulator

(1-phase) Nos. 3

D.3 11 kV HT cable alongwith associated accessories Km 1

E RELAY PANELS (WITH AUTOMATION)

1.0 220 kV


i With Auto Reclose Set 5ii With out Auto Reclose Set 2

b Line Protection Panel Set 4d Transformer Protection Panel (For both HV & MV side) Set 1e Bus Bar Protection Panel Set 1

2.0 132 kV




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description




i With Auto Reclose Nos. 7

ii With out Auto Reclose Nos. 2

b Line Protection Panel Nos. 6

c Bus Bar Protection Panel No 1

F COMMON EQUIPMENTS

1.0 Relay Tool kit No 12.0 Time synchronisation equipment No. 1G SUBSTATION AUTOMATION

G.1

Complete Substation Automation System (SAS) for substation

including hardware and software for the substation & remote

control stations alongwith associated equipments for the following

bays as per Technical Specification

a Main bays to be automated

i 220 kV system Bay Nos 7ii 132 kV substation Bay Nos 9

v) BCU for controlling & monitoring of Auxilary System Set 1H PLCC, Teleprotection & communication Equipments

(i) 220 kV system

(a) Digital Protection Coupler Nos 4(b) Digital Protection Coupler(for other end) Nos 4(ii) 132 KV System

a Line Traps

i 1250A, 0.5mH, 31.5kA(132kv) Nos 6

b Bus Post Insulators for Line Traps

i 132 kV BPIs Nos 18


c2 Coupling device (othe end) Nos 6


d2 Protection Coupler(for other end) Nos 6

e1Carrier Equipment (for speech+protection+Data)(Analog

type)(New Butwal end)Nos 12




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



e2Carrier Equipment (for speech+protection+Data)(Analog

type)(Other end)Nos 12

f HF cable Km 4

g PABX with following configuration as per TS Set 1

i)2 wire subscriber interface card with capacity 32 local subscribers

(along with 32 nos. Instruments)

ii)4 wire E & M interface card with capacity 8 nos. trunks (For

PLCC)

iii) E-1 interface with 2 trunks G-703

iv) 2 wire interface with 1 trunk (For PSTN)

h Testing & Maintenance equipment (print test kit only) Set 1k 4 wire telephone equipment No 1

I LT Switchgear (As per Technical specification)

a 415V Main switchboard Set 1b 415V ACDB Set 1c 415V MLDB Set 1d 415V Emergency LDB Set 1e 220V DCDB Sets 2e 48V DCDB Sets 2J Batteries

a 220V

i 600 AH Nos 2b 48V

i 600 AH Nos 2

K Float Cum Boost Battery Charger

a 220V Float Cum Boost Battery Charger

i 80A/80A Nos 2

b 48V Float Cum Boost Battery Charger




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



i 60A60A Nos 2

L Diesel Generator with control Panel

a 50 KVA Set 1b 25 KVA Set 1

M Fire Protection System

a Portable /Trolley/Wheel mounted extinguishers

i 9 litre water type Nos 5ii 50 litre foam type Nos 2iii 4.5 kg CO2 type Nos 13iv 4.5 kg Dry Chemical Power (DCP) type Nos 5

b Smoke detection system Set 1c Fire detection and Alarm System Set 1

NCables along with clamps, glands, lugs and straight joints

etc.

b Power Cables - (1.1kV grade)

i3.5Cx300 sqmm (XLPE) cable for filter Machine along with

termination arrangement as per TSKM 1

OAir conditioning System for Control room cum administrative

building

a High wall type split AC unit of 2 TR capacity Nos 20

p

Fabrication, galvanising and supply of following Steel

Structures including nuts, bolts, all types of washers,

packplates, step bolts and gusset plates including foundation

bolts.

(a) Lattice Structure including Foundation Bolts MT 316(b) Pipe Structure including Foundation Bolts . MT 80(c ) Fastners and step bolts.(Nuts,Bolts & Washers) MT 18




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



Q

Communication equipments for Matatirha Substation (For

Location wise breakup, please refer Technical specification,

Chapter 18, (Appendix - A)


(i) SDH Equipment ( STM- 4 MADM, upto 3 MSP protected directions)

(a)

Base Equipment (Common cards, Cross-connect/control cards,

Optical base cards, Power supply cards, power cabling, other

hardware & accessories including sub-racks, patch cords, DDF

etc. fully equipped excluding (ii) and (iii) below)

No. 2

(ii) Optical Interface/SFP# for

(a) L4.2 Nos. 10

(b) Optical Line Interface Card (To support minimum 150 Kms) Nos. 10


i E1 Interface card (Minimum 16 interfaces per card ) Nos. 2

iiEthernet interfaces 10/100 Mbps with Layer-2 switching

(Minimum 4 interfaces per card.)No. 4


A1

Drop/Insert Multiplexer

Base Equipment (Common cards, Power supply cards, power

cabling, other hardware & accessories including sub-racks,

etc. fully equipped excluding subscriber line interface cards)

Nos. 2


(a)2 wire (sub/sub) voice channel cards (min 8 channels per

card)Nos. 2

(b) 4 wire (E&M) voice channel cards (min 8 channels per card) Nos. 2

(c )Asynchronous Sub Channels data cards (minimum 4

channels per card)Nos. 2




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



3 Equipment Cabinets

(a) For Drop/Insert Multiplexer No. 2

(b) For SDH Equipment No. 2

4 TMN – Craft Terminal for SDH & PDH Equipments

(a) Hardware Set* 1

(b) Software Set* 1

5 Main Distribution Frame(100 pairs) No. 2

Note# :Optical interface/SFP can be provided with Optical

base card or Control card with the condition that control card

shall not be equipped with more than one Optical

interface/SFP and optical card with not more than two

Optical interface/SFP. However main and protection channel

shall be terminated on separate cards

Note*: Set shall include all required hardware/software for

complete TMN –Craft Terminal system as specified in

technical specifications.

6 Supply of Safety accessories

i) Safety Helmets Nos. 500 -

ii) Safety Boots Pairs 350 -

iii) Hand safety Gloves Pairs 500 -

iv) Protective eye goggles Nos. 300 -

v) Construction Life Jackets with trousers Pairs 350 -

vi) Primary health kit Set 300 -

vii) Raincoat Set 400 -

viii) Site Bag Set 400 -

7 Office Equipment




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



i) A0 Plotter including all accessories with networking

functionSet 1

8.0 Electrical Measuring & Test Equipment







vii) Fully Automatic Capacitance and Dissipation Factor (tan

delta) test setSet 1




9.0 Close Circuit Television (CCTV) Lot 1

Sub-Total Part-A

Part-B: VENDOR ASSESSED QUANTITIES

A Erection Hardware

Insulator strings, Disc Insulators, Hardware, conductor, Al tube,

bus-bar materials, cable trays, Bay MB, clamps, spacers,

connectors including equipment connectors, Junction box,

earthwire, buried cable trenches/pipe equipment & lighting, all

accessories etc. for the following:

a 220 kV Layout (DMT Layout)

i Line Bay Set 4


iii TBC Bay Set 1

iv BC bay Set 1




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description




b 132 kV (DMT Layout)

i Line Bay Set 6


iii TBC Bay Set 1

iv BC bay Set 1


e

Earthing and lightning protection including necesaary

connectors/connections, risers etc. complete in all respect ( but

excluding LM structures for Lightning protection)

i Earth Conductor (copper) LS 1

ii Earth Rod (copper clad steel) LS 1

iii Equipment for lightning protection LS 1

B Fire Protection System

aPumping arrangement for HVW system & hydrant system,

complete with all piping, valves, fittings,etc. inside pump house


bHydrant system, complete U/G piping and accessories etc.

outside the Pump House.


c

HVW spray system, Hydrant system and complete U/G & O/G

piping and accessories etc. out side the pump house for

Transformer :

c.1 Transformer

i 100MVA , 220/132/11 KV, 3-phase Autotransformer Sets 1

d Fire detection & Alarm System for Control Room Building Set 1

e

Fire detection & Alarm System for Switchyard panel room

including one number 4.5 kg CO2 type fire Extinguisher for fire

Protection

Set 6

C Illumination System




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



a Illumination System for switchyard panel room

i 220KV Sets 3

ii 132kV Sets 3

b Control room cum administrative building illumination LS 1

c Switchyard lighting LS 1

d Street lighting LS 1

e Transit Camp LS 1

f Township quarter (B-Type, 4 nos) LS 1g Township quarter (C-Type, 4 nos) LS 1h Township quarter (D-Type, 1 nos) LS 1i Car parkings (2 nos) LS 1j Water Tank and Pump LS 1

k Guard House LS 1

l Corrugated Sheets for Temporary Fencing 8' Tall R. Mtr 1000

m Stone Soling Works LS 1

n HDPE Pipe Dia for Weep Holes as necessary LS 1

o Geotextile LS 1

p Stone Pitching LS 1

q Gabion Works LS 1D Air conditioning System

a

Air conditioning for S/Y panel room

i 220KV Sets 3

ii 132kV Sets 3

E SUBSTATION AUTOMATION

a

Integration of all 220/132/33kV Bays under present scope with the

SCADA of SIEMENS (SINAUT Spectrum) at Load Dispatch

Centre, Kathmandu including supply of Hardware, Software,

accessories etc. as per TS Section Project.

LS 1




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



G POWER & CONTROL CABLES


b Power Cables (XLPE)- (1.1kV grade) LS 1

c Control Cable (PVC)- (1.1kV grade) LS 1

dCable glands, lugs & straight through joints for Power & Control

cablesLS 1

H Social MobiliserPerson

Month18

Sub-Total Part-B

(I) Part-C: Mandatory Spares

(I-A) Mandatory Spare List for Autotransformer

For 100MVA , 220/132/11 KV, 3-phase

Autotransformer

a)Bushing of each rating with metal parts & gaskets and

lifting toolsSet 1

b) Cooler fan with Motor No. 1

c)Buchholz Relay(Main Tank) complete with floats and

contacts Set 1

d)Local and Remote WTI with sensing device and

contact(each)Set 1

e) Magnetic oil level gauge No. 1

f)Strarters, contactors,switches & Relays for Electrical

control panels(One ste of each type)Set 1

g) Remote Tap postion Indiactor No. 1

h) Oil Flow Indicator with Flow Switch Set 1

i)Spare insulating oil to be handed over to Owner after

commisioning for O&M requirementKL 10

(II) 245kV CB




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



i)

Complete Pole of circuit breaker including pole column,




ii)Rubber gaskets, `O' rings and seals ( for complete replacement of

one pole of CB) Set 1





vii)Relays, Power contactors, switch fuse units, limit switches, push

buttons, timers & MCB etc. (1 no. of each type)Set 1



(III) 145kV CB

i)




1250A, 31.5 KA (No. of Pole) No. 1











(IV-a) 36kV CB

i)










Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description











(V) 245kV Isolator

i) One complete pole including support Insulator, motor operating

mechanism (MOM) with box but excluding structure

3000A, 40 KA, 1 E/S (no. of pole) No. 1

ii)Copper contact fingers for male & female contacts ( for one pole

of Isolator)Set 2

iii)Open/Close contactor assembly, timers, key interlock push button

switch & auxilliary switches (for one pole of Isolator)Set 1



vi) Corona shield rings Nos. 3

(VI) 145kV Isolator

i) One complete pole including support Insulator, motor operating

mechanism (MOM) with box but excluding structure

1250A, 31.5 KA, 1 E/S (no. of pole) No. 1

ii) Copper contact fingers for male & female contacts Set 2


switch & auxilliary switchesSet 1

iv) Limit Switch Set 2


(VII-a) 36 kV Isolator

i) One complete pole including support Insulator, MANUAL

operating mechanism with box but excluding structure

400A, 25KA, 1 E/S (no. of pole) No. 1

ii)Copper contact fingers for male & female contacts ( for one pole

of Isolator)Set 2




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description




switch & auxilliary switches (for one pole of Isolator)Set 1



(VII-b) 36kV Isolator

(VIII) 245kV CT

i 2000A, 40KA with 120% extended current rating No. 1

ii 2000 A, 40KA with 150% extended current rating No. 1

(IX) 145kV CT

i 800A, 31.5 kA with 120% extended rating No. 1

(X-a) CT(36 kV,400A with 120% extended current rating) No. 1

(XI) CVT (245 kV,4400 pF) No. 1

(XII) CVT (145 kV,4400 pF) No. 1

(XIII-a) 36kV PT No. 1

(XIV) 216 SA

i) Complete LA No. 1

ii) Surge counter/monitor Nos. 5

(XV) 120kV SA



(XVI) 9kV SA



(XVII) C&R PANELS

i) Transformer protection panel :

a) Transformer differential protection No. 1

b) REF protection relay with non-linear resistor No. 1

c) Directional over current & E/F Protection Relay No. 1

ii) Line protection panel :

a) Numerical distance relay ( 1 no. of each type) Set 1

iv) Breaker Relay panel:




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



a) Breaker failure relay No. 1

b) Trip circuit supervision relay Nos. 2

c)Auto Reclose relay with check synchronizing relay and dead line

charging relayNo. 1

d) Self reset trip relay (relay of each type) Set 1

e) Hand reset trip relay(relay of each type) Set 1

f) Timer relay(relay of each type) Set 1

g) DC supervision relay(relay of each type) Set 1

h) Flag relays(relay of each type) Set 1

i) Auxiliary relays(relay of each type) Set 1

(XVIII) PLCC

i) Set of prints for carrier terminal Set 1

ii) Set of prints for protection coupler Set 1

(XIX) SAS

i) Bay Control Unit (IED) of each type Set 1

ii) Ethernet Switch of each type Set 1

(XX) BATTERY CHARGER( 220kV)

i) Set of control cards Set 1





(XXI) BATTERY CHARGER( 48kV)

i) Set of control cards Set 1





(XXII) COMMON SPARES

i) Bay unit Module No. 1

ii) 2 wire local subscriber interface card for PABX No. 1




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



iii) E1 Interface card for PABX No. 1

(XXIII) Mandatory Spares of Communication Equipments


ASDH Equipment ( STM- 4 MADM, upto 3 MSP

protected directions)

(i)Common cards, Power supply cards, power cabling, other

hardware & accessories (each)Set

$$ 1

(ii) Optical Interface/SFP for

(a) L4.2 No. 1

(b)Optical Line Interface card for STM-4 (to support minimum

150 kms)**No. 1


(a) E1 Interface card (Minimum 16 interfaces per card) No. 1

(b)Ethernet interfaces 10/100 Mbps with Layer-2 switching

(Minimum 4 interfaces per card.)No. 1


Drop & Insert Multiplexer Set$$ 1

Common cards, Power supply cards, power cabling, other

hardware & accessories (each)


a)2 wire (sub/sub) voice channel cards (min 8 channels per

card)No. 1

b) 4 wire (E&M) voice channel cards (min 8 channels per card) No. 1

c)Asynchronous Sub Channels data cards, minimum 4

channels per cardNo. 1

3Pre Connectorized Optical Fiber Patch Cords (10 Mtrs)

– Pack of Six Patch CordsSet 1

A1




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



Note$$: One Set means one of each type of module/unit

card etc

Note** : Suitable Optical Interface Card(s) or any other

solution such as SDH equipment with optical amplifier,

wavelength translator or higher aggregate bit rate SDH

equipment may be offered for the length to meet the link

budget requirements without repeater

Sub-Total Part-C

Total For Supply of 220/132kV New Butwal

Substation (Part-A+ Part-B+ Part C)

Total for Schedule 1 ( Total of column 11 and 12 to be

carried forward to Schdule 5: Grand Summary)

Note : 1) Bidder is required to quote prices in this Schedule for all the individual items/sub-items.

#Specify currency in accordance with BDS ITB Clause 32.1,

Part-I of the Bidding Documents.

* Strike-out whichever is not applicable.

Name of Bidder: Date:


2.) The Prices of equipments are inclusive of type test charges except.towers, conductors and earthwires.

3.) BOQ given above is indicative only based on the scope of work as given in Employer's Requirements. The quantities mentioned above may undergo change during detailed




Taxes and Duties)


1 2 3 4 5 6 = (5) x (4) 7 8 9=(6)+(5)

Item

No.Item description



(Printed Name)

(Designation)

(Common Seal)



Local Currency

Portion

Foreign Currency

Portion

Quantity Unit NRs Currency LC FC

1 2 3 4 5 6 7=3x5 8=3x6

Total (Total of column 7 and 8 to be

carried forward to Schedule No. 5A:

Grand Summary)

Name of Bidder: Date:Signature of Bidder:

(Printed Name)

(Designation)

(Common Seal)

Schedule A-3: Design Services NOT APPLICABLE

Item No. Item DescriptionEstimated

Unit Prices Total Prices





TENDER NO.: ICB-PMD/KGTCP/073/74-03 SCHEDULE - 4(a) PAGE 41 OF 61

Currency# Unit Rate Total Charges Currency# Total Charges

(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)

I-A 220/132kV New Butwal Substation

Part-A : EMPLOYER ASSESSED QUANTITIES


A1.1POWER TRANSFORMER

A1.1

.13-Ph Autotransformers

a) 100MVA , 220/132/11 KV, 3-phase Autotransformer (Excluding insulating oil) Nos. 1

b) Insulating oil for 100MVA , 220/132/11 KV, 3-phase Autotransformer(* 1Lot = Oil for 1Autotransformers

)

Lot* 1

A2 LT TRANSFORMER

1.0 630 kVA,11/0.400kV Nos 2

B 245 kV equipment

1.0 245 kV Circuit Breakers (3-Phase) with support structure



a 1600A, 40 KA, Isolator with one E/S Nos 3b 2500A, 40 KA, Isolator with one E/S Nos 3c 1600A, 40 KA, Isolator with two E/s Nos 3d 2500A, 40 KA, Isolator with two E/s Nos 3

Schedule No. 4 : Installation and Other Services

(a): Installation and Construction Charges

Installation Charges




Sl.

No.Item Description Unit

Qty.Portion in Foreign Currency Portion in Nepalese Currency




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)



Installation ChargesSl.



e 1600 A, 40KA, Tandem Isolator without E/S Nos 6f 2500 A, 40KA, Tandem Isolator without E/S Nos 5g 3000A, 40 KA, Isolator with two E/s Nos 2




a 4400 pF 18 12

5.0 216 kV Surge Arrestors (1-phase) 15 9

6.0 245 kV Bust Post Insulator 90 50

C 145 kV equipment


a 1250A, 31.5 kA Nos 9


a 1250A, 31.5 KA, Isolator with one E/S Nos 8b 1250A, 31.5 KA, Isolator with two E/s Nos 10c 1250A, 31.5 KA, Tandem Isolator without E/S Nos 15









(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






D1 36kV EQUIPMENT

1.1 36 kV, 400A, 25kA Circuit Breaker (3-phase) with support structure No. 1

1.2 36 kV, 400A, 25kA Isolators with earth switch (3-phase, DBR type) No. 1

1.3 630kV, 400A, 25 kA with 120% extended rating CT. Nos. 3



D.2

11kV Equipments

1.1 11 kV, 400A Isolators with out earth switch (3-phase, DBR type) No. 1



1.4 11 kV, 400Amp HG Fuse along with support insulator (1-phase) Nos. 3

D.3 11 kV HT cable alongwith associated accessories km 1

E

1.0 RELAY PANELS (WITH AUTOMATION)

a 220 kV

i Circuit Breaker Relay Panel 5 3ii With Auto Reclose Set 2

b With out Auto Reclose 4 2d Line Protection Panel Set 1e Transformer Protection Panel (For both HV & MV side) Set 1

2.0 Bus Bar Protection Panel

a 132 kV

i Circuit Breaker Relay Panel Nos. 7

ii With Auto Reclose Nos. 2

b With out Auto Reclose Nos. 6

c Line Protection Panel No 1

Bus Bar Protection Panel




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






F

2.0 COMMON EQUIPMENTS No. 1G Time synchronisation equipment

G.1 SUBSTATION AUTOMATION

a Complete Substation Automation System (SAS) for substation including hardware and software for the substation & remote

control stations alongwith associated equipments for the following bays as per Technical Specification

i Main bays to be automated Bay

Nos

7

ii 220 kV system Bay

Nos

9

v) 132 kV substation Set 1H BCU for controlling & monitoring of Auxilary System a PLCC, Teleprotection & communication Equipments

(i) Line Traps

(a) 220 kV system Nos 4

(b) Digital Protection Coupler Nos 4

(ii) Digital Protection Coupler(for other end)

i 132 KV System Nos 6

b 1250A, 0.5mH, 31.5kA(132kv)

i Bus Post Insulators for Line Traps Nos 18

c1 132 kV BPIs Nos 6


d1 Coupling device (othe end) Nos 6


e1 Protection Coupler(for other end) Nos 12

e2 Carrier Equipment (for speech+protection+Data)(Analog type)(New Butwal end) Nos 12

f Carrier Equipment (for speech+protection+Data)(Analog type)(Other end) Km 4

HF cable

g Set 1i) PABX with following configuration as per TS

ii) 2 wire subscriber interface card with capacity 32 local subscribers (along with 32 nos. Instruments)

iii) 4 wire E & M interface card with capacity 8 nos. trunks (For PLCC)

iv) E-1 interface with 2 trunks G-703




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






h 2 wire interface with 1 trunk (For PSTN) Set 1k Testing & Maintenance equipment (print test kit only) No 1

4 wire telephone equipment

I

a LT Switchgear (As per Technical specification) Set 1b 415V Main switchboard Set 1c 415V ACDB Set 1d 415V MLDB Set 1e 415V Emergency LDB Sets 2e 220V DCDB Sets 2J 48V DCDB

a Batteries

i 220V Nos 2b 600 AH

i 48V Nos 2600 AH

K

a Float Cum Boost Battery Charger

i 220V Float Cum Boost Battery Charger Nos 280A/80A

b

i 48V Float Cum Boost Battery Charger Nos 260A60A

L

a Diesel Generator with control Panel Set 150 KVA Set 125 KVA

M

a Fire Protection System

i Portable /Trolley/Wheel mounted extinguishers Nos 5ii 9 litre water type Nos 2iii 50 litre foam type Nos 13iv 4.5 kg CO2 type Nos 5




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






b 4.5 kg Dry Chemical Power (DCP) type Set 1c Smoke detection system Set 1

Fire detection and Alarm System

N

b Cables along with clamps, glands, lugs and straight joints etc.

i Power Cables - (1.1kV grade) KM 13.5Cx300 sqmm (XLPE) cable for filter Machine along with termination arrangement as per TS

O

a Air conditioning System for Control room cum administrative building Nos 20High wall type split AC unit of 2 TR capacity

p

(a) Erection of following Steel Structures including nuts, bolts, all types of washers, packplates, step bolts and gusset

plates including foundation boltsMT 316

(b) Lattice Structure including Foundation Bolts MT 80(c ) Pipe Structure including Foundation Bolts . MT 18

Fastners and step bolts.(Nuts,Bolts & Washers)

Q

Communication equipments for Matatirha Substation (For Location wise breakup, please refer Technical

specification, Chapter 18, (Appendix - A)

1

(i) Transmission Equipment

(a)

SDH Equipment ( STM- 4 MADM, upto 3 MSP protected directions)

No. 2

(ii) Base Equipment (Common cards, Cross-connect/control cards, Optical base cards, Power supply cards, power cabling, other

hardware & accessories including sub-racks, patch cords, DDF etc. fully equipped excluding (ii) and (iii) below)

(a) Optical Interface/SFP# for Nos. 10

(b) L4.2 Nos. 10(iii) Optical Line Interface Card (To support minimum 150 Kms)

i Tributary Cards Nos. 2ii E1 Interface card (Minimum 16 interfaces per card ) No. 4

Ethernet interfaces 10/100 Mbps with Layer-2 switching (Minimum 4 interfaces per card.)




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






2

A1 Termination Equipment Nos. 2A2 Drop/Insert Multiplexer

Base Equipment (Common cards, Power supply cards, power cabling, other hardware & accessories including sub-

racks, etc. fully equipped excluding subscriber line interface cards)

(a) Subscriber Line Interface Cards Nos. 2(b) 2 wire (sub/sub) voice channel cards (min 8 channels per card) Nos. 2(c ) 4 wire (E&M) voice channel cards (min 8 channels per card) Nos. 2

Asynchronous Sub Channels data cards (minimum 4 channels per card)

3

(a) Equipment Cabinets No. 2(b) For Drop/Insert Multiplexer No. 2

For SDH Equipment

4

(a) TMN – Craft Terminal for SDH & PDH Equipments Set* 1(b) Hardware Set* 1

Software

5 No. 2Main Distribution Frame(100 pairs)

Note# :Optical interface/SFP can be provided with Optical base card or Control card with the condition that control

card shall not be equipped with more than one Optical interface/SFP and optical card with not more than two Optical

interface/SFP. However main and protection channel shall be terminated on separate cards

Note*: Set shall include all required hardware/software for complete TMN –Craft Terminal system as specified in

technical specifications.

7 Installation of Office Equipment

i) A0 Plotter including all accessories with networking function Set 1

8.0 Installation of Electrical Measuring & Test Equipment






(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)










vii) Fully Automatic Capacitance and Dissipation Factor (tan delta) test set Set 1




9.0 Installation of Close Circuit Television (CCTV) Lot 1

Sub-Total Part-APart-B: VENDOR ASSESSED QUANTITIES

A

Erection Hardware

a Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, Bay MB, clamps, spacers,

connectors including equipment connectors, Junction box, earthwire, buried cable trenches/pipe equipment & lighting, all

accessories etc. for the following:

i 220 kV Layout (DMT Layout) Set 2

ii Line Bay 4 1

iii Transformer Bay Set 1

iv TBC Bay Set 1

v BC bay Set 2

b Bus work (Three Bays) 3

i 132 kV (DMT Layout) Set 6

ii Line Bay Set 1

iii Transformer Bay Set 1

iv TBC Bay Set 1

v BC bay Set 3

Bus work (Four Bays)

e Bus work (Three Bays)

i Earthing and lightning protection including necesaary connectors/connections, risers etc. complete in all respect ( but

excluding LM structures for Lightning protection)

LS 1

ii Earth Conductor (copper) LS 1




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






iii Earth Rod (copper clad steel) LS 1

B Equipment for lightning protection

a Fire Protection System

i Pumping arrangement for HVW system & hydrant system, complete with all piping, valves, fittings,etc. inside pump house Set 1

b 220/132kV (New) Substation

i Hydrant system, complete U/G piping and accessories etc. outside the Pump House. Set 1

c 220/132kV (New) Substation

c.1 HVW spray system, Hydrant system and complete U/G & O/G piping and accessories etc. out side the pump house for

Transformer :

i Transformer Sets 1

d 100MVA , 220/132/11 KV, 3-phase Autotransformer Set 1

e Fire detection & Alarm System for Control Room Building Set 6

Fire detection & Alarm System for Switchyard panel room including one number 4.5 kg CO2 type fire Extinguisher for fire

Protection

C

Illumination System

a

i Illumination System for switchyard panel room Sets 3

ii 220KV Sets 3

b 132kV LS 1

c Control room cum administrative building illumination LS 1

d Switchyard lighting LS 1

e Street lighting LS 1

f Transit Camp LS 1g Township quarter (B-Type, 4 nos) LS 1h Township quarter (C-Type, 4 nos) LS 1i Township quarter (D-Type, 1 nos) LS 1j Car parkings (2 nos) Nos 15k Lighting Fixture LED Luminaries type S-LED Nos 15j Water Tank and Pump LS 1k Guard House LS 1l Corrugated Sheets for Temporary Fencing 8' Tall R.

Mtr

1000




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






D Solar Based Pole Mounted Street Lighting including fittings

a Air conditioning System

i Air conditioning for S/Y panel room Sets 3

ii 220KV Sets 3

132kV

E

a SUBSTATION AUTOMATION LS 1

Integration of all 220/132/33kV Bays under present scope with the SCADA of SIEMENS (SINAUT Spectrum) at Load Dispatch

Centre, Kathmandu including supply of Hardware, Software, accessories etc. as per TS Section Project.

G

b POWER & CONTROL CABLES LS 1


c Power Cables (XLPE)- (1.1kV grade) LS 1

d Control Cable (PVC)- (1.1kV grade) LS 1

Cable glands, lugs & straight through joints for Power & Control cables

Sub-Total Part-B

PART-C: Civil Works (As per technical specification)

1.0 Excavation in all types of soil and rock including backfilling disposal etc. for all leads and lifts Cu.M

tr.30000

2.0 Providing and laying of Plain Cement Concrete (PCC) (1:4:8) Cu.M

tr.1726

3.0 Providing and laying of Plain Cement Concrete (PCC) (1:2:4) Cu.M

tr.405

4.0 Providing and laying of Reinforced Cement Concrete Design Mix (M25) including pre cast, shuttering,

Grouting of pockets & underpinning but excluding steel reinforcement.

Cu.M

tr.5100

5.0 Providing and laying Plain Cement Concrete 1:5:10 (1 cement : 5 sand : 10 Stone aggregate) Cu.M

tr.3000

6.0 Steel Reinforcement (Fe 500) MT 330




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






7.0 Miscellaneous Structural steel used for rails , plates for rail fixing, ,gratings, gratings supports etc for

transformer /reactor foundation,cable supportstand earthing cleats ,chequered plates, embedments, edge

protection angles for cable trenches but excluding the reinforcement steel and steel for lattice and pipe

structures which shall be paid seperately.

MT 51

8.0 Stone filling (40mm) over grating of Transformer /reactor Foundation Cu.M

tr.20

9.0Stone spreading including antiweed treatment in switchyard but excluding PCC.

Sq.

Mtr.40000

10.0Supplying & laying hume pipe with collars of grade (NP-3) but excluding concrete of

bed/support/encasing of hume pipes which shall be paid seperatelyunder respective items of BPSi) 250mm dia RM 150ii) 300mm dia RM 120iii) 450mm dia RM 80iv) 600mm dia RM 40v) 900 mm dia RM 300

11.0 Concrete road as per technical specification and approved drawing but excluding reinforcement &

concrete which shall be paid seperately under respective items of BPSa. Concrete Road (3.75mtr wide) Sq. m. 4125

a. Concrete Road (5.5mtr wide) Sq. m. 1125

12.0Construction of rail-cum-raod as per technical specification and approved drawing including all items

such as excavation, compaction, rolling, watering, WBM, etc but excluding concrete, reinforcement and

structural steel which shall be paid seperately under respective items of BPSa. Section having two rails Sq. m. 110

13.0Chain link fencing as per technical specification and approved drawing but excluding concrete which shall

be paid seperately under respective items of BPSRM 1000

14.0 Switch yard Gate excluding concrete which shall be paid seperately under respective items of BPS Nos. 215.0 Supplying and erecting dewatering pumps

a. 5 HP Nos. 2b. 0.5 HP Nos. 3

16.0 All civil works for construction of drains as per technical specification and approved drawing excluding

concrete which shall be paid seperately under respective items of BPSa. Type AA (300mm wide x Depth up to 600mm) RM 1800

b. Type BB (450 wide x Depth From 600 to 900mm) RM 1400




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






c. Type CC (600 wide x Depth From 900 to 1200mm) RM 1400

d. Type DD (750 wide x Depth From 1200 to 1500mm) RM 1200

17.0 External water supply as per technical specification from borewell/single point of water supply within

substation boundary to Fire water Tank, control room Building and other buildings as applicable

including all items like excavation, pipes, fittings, jointings, valves, chambers/manholes etca. 80mm Dia GI Pipe RM 100b. 50mm dia GI pipe RM 80c. 40mm dia GI pipe RM 60d. 25mm Dia GI Pipe RM 40

18.0 External sewerage system including all item such as excavation, piping, pipe fittings, manholes, gali trap,

gali chamber etc.a. (i) 250 mm Dia. RM 50b. (i) 150 mm Dia. RM 50

19.0 Local Sand filling around and under DG Set Foundation and other foundations as applicable. Cu.M

tr.300

20.0 Stone soling below foundations wherever specified in approved drawings during detailed engineering Cu.M

tr.200

21 All civil works as per technical specification and approved drawing including internal finish but

excluding excavation, PCC, RCC, reinforcement steel and external finishing which shall be paid

seperately under respective items of BPSi Control room cum administrative building (Double story) as per TS Sq. m. 750

ii Fire fighting pump house buliding as per TS Sq. m. 98

iii Fire fighting Water tank LS 1

iv Switch yard Panel Room (6.0 M X 3.9 M). Sq. m. 144

v Township (quarters)

(a) B type Sq. m. 500

(b) C type Sq. m. 600

(c) D type Sq. m. 210

vi Transit CampSq. m. 420




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






vii

Car Parking shed (for 10 cars)Set 2

22

External finish as per specification for following buildings:

i Control room cum administrative building (Double story) as per TS Sq. m. 750

ii Fire fighting pump house buliding as per TS Sq. m. 98

iii Fire fighting Water tank LS 1

iv Switch yard Panel Room (6.0 M X 3.9 M). Sq. m. 144

v Township (quarters)

(a) B type Sq. m. 500

(b) C type Sq. m. 600

(c) D type Sq. m. 210

vi Transit Camp Sq. m. 420vii Car Parking shed (for 10 cars) Set 2

23Septic tank as per specification and approved design according to International/British standards and soak pit as per

approved drawing excluding concrete & reinforcement (For 50 users)No 3

24 Geotechnical /Soil Investigation as per technical specificationLS

1

25 Site levelling

a) Earth work in cutting & Filling in all types of soils including soft/disintegrated rock with all Cu.M

tr.40000

b) Earth work in filling with borrowed earth with all leads and lifts including royalty,taxes etc from within

5(five) km

Cu.M

tr.7000

c) Earth work in filling with borrowed earth with all leads and lifts including royalty,taxes etc from within

15 (fifteen) km

Cu.M

tr.3000

26 All civil works for Boundary wall including excavation, concrete, reinforcement steel ,structural steel,

plaster, painting, barbed wire and concertina coil etc all complete as per technical specification (2.5 m high

brick masonary wall and 0.5 m high angle support on top).

RM 2000




(1) (2) (3) (4) 5 6 7=(4)x(6) 8 9=(4)x(8)






27 All civil works for security room as per TS including septic tank and soak pit. Internal and external finish,

sanitary and plumbing works, plinth protection etc. to complete the building are included in the item.Sq.

m.18


TENDER NO.: ICB-PMD/KGTCP/073/74-03 SCHEDULE - 4(b)PAGE 55 OF 61


(b):Training Charges for training to be imparted abroad

Currency Unit rate per

trainee

Total

Training Charges

1 2 3 4 5 6 7 8 9 = (8)x(6)x(5)

i) Control & Protection and Substation Automation

System

4 5

ii) Switchyard Equipments (CT, CVT, Isolator and

Circuit Breaker)

4 2

iii) Telecommunication Equipment (SDH ,MUX &

NMS (Craft Terminal)) and PLCC

4 2

iv) Transformers 4 2

v) OLTC 4 5

B

Training on all applicable standards mentioned in the Bidding

Document including Supply of all applicable standards

Transformers, CB, Instrument Transformers, LA,

Relays and Protection Schemes, Metering

Instruments, Switching Devices, Insulators, etc.

5 10

C Training on PLCC and SCADA PLCC and SCADA 5 10Total for Training Charges (total of coulmn 7 to be

carried forward to Schedule 5: Grand summary)

Name of Bidder: Date:


(Printed Name)

(Designation)

(Common Seal)

Total Training Charges

A

Sl. No.Description

Item for which training is to be imparted. Country where training

is to be imparted

Nos. of

Trainee

Training

duration in

days

Training to Owners personnel on Design , testing

and Maintenance aspect as per Section Project,

Technical Specification at manufacturer's works





TENDER NO.: ICB-PMD/KGTCP/073/74-03 SCHEDULE - 4(c) PAGE 56 OF 61


(c):Training Charges for training to be imparted to Employer's Personnel by Bidder's Instructor in Nepal

Unit rate Total

Training Charges

1 2 3 4 5 6 8 = (4)x (5)x(6)

i) Control & Protection 5 10

ii) Substation Automation System including

integration aspect of existing SCADA (of

Siemens suppliedSINAUT Spectrum Software)

at Load Dispatch Center

5 10

iii) Switchyard Equipments (CT, CVT, Isolatot

and Circuit Breaker)

3 10

iv) Telecommunication Equipment (SDH ,MUX

& NMS (Craft Terminal)) and PLCC

5 10

v) Transformers 2 10

b)On Job training on design of Structures and

Foundation for Electrical Engineers

Design of Structures and Foundation using

conventional methods as well as PLS-Tower

3 Months 5

c)On Job Training on AutoGrid Pro Software

for Earthing Design

Design of Earthing for EHV Stations as per

IEEE Standard 80- 2013 and IS 3043

1 Week 10

d)

On job training on Advance Ms-Word,

Advance Ms-Excel and Primavera at site

office

Advance Microsoft Word, Excel and Project 1 Month 10

Total for Training Charges ( Total of

column 6 to be carried forward to

Schedule 5: Grand Summary)

Date:

REMARKS:

2. On Job Training in Nepal: The traveling and living expenses of Owner’s personnel for the training programme conducted in Nepal shall be borne by the Owner.

NOTE: To and fro charges and accommodation for the Instructor (Trainer) and Training material for the Trainees shall be included in the prices quoted by the bidder.

Description of the TestTraining duration

in days

Training Charges for Contractors Trainers

a)

No. of TraineesSl. No.Item for which training is to be imparted.




On Job training on operation, maintenance

and testing & commissioning aspect at

each substation as per section Project,

Technical Specification


TENDER NO.: ICB-PMD/KGTCP/073/74-03 Schedule - 4(c) Page 57 of 61


(d): Maintenance Charges

CurrencyTotal Maintenance

Charges

1Maintenance Charges for Communication Equipments including SDH

& MUX. for One (1) year during Warranty periodYear 1

2Maintenance Charges for Communication Equipments including SDH

& MUX. for Six (6) years after Warranty periodYear 6

Total Maintenance Charges (To be carried forward to Schedule 5:

Grand Summary)

Date: Signature:

Printed Name:

Designation:

Common Seal:




Sl No Description Unit Qty.

Total Maintenance Charges


TENDER NO.: ICB-PMD/KGTCP/073/74-03 SCHEDULE - 4(e) PAGE 58 OF 61

Schedule No. 4(e)

Type Test Charges for Type Tests to be conducted abroad

Currency # Amount

1 2 3 4 5

1 Temperature rise test

2 Measurement of harmonic level in no load current

3 Measurement of acoustic noise level

4 Measurement of Zero seq. reactance

5 Measurement of power taken by fans and oil pumps

6 Circuit Breaker For all ratings tests to be conducted as per IEC:62271-100

7Instrument

TransformersFor all ratings tests to be conducted as per IEC:60044-1 & IEC-60358

8 Lightening Arrestor For all ratings tests to be conducted as per IEC: 60099-4

9 Insulators For all type of Insulators

Date: Signature:

Printed Name:

Designation:

Common Seal:

220/132/11kV Auto

Transformer

Total of Type Tests charges (Total of column 5 to be carried forward to Schedule 5: Grand

Summary)

Sl. No.Testing Location




220/132/33kV 3-Ph , 100MVA Auto Transformer

TEST CHARGES Description of Tests


TENDER NO.: ICB-PMD/KGTCP/073/74-03 SCHEDULE - 4(f) PAGE 59 OF 61

Schedule No. 4(f)

Type Test Charges for Type Tests to be conducted in Nepal.

Currency # Amount

1 2 3 4 5

1 Temperature rise test

2 Measurement of harmonic level in no load current

3 Measurement of acoustic noise level

4 Measurement of Zero seq. reactance

5 Measurement of power taken by fans and oil pumps

Date: Signature:

Printed Name:

Designation:

Common Seal:

220/132/33kV Auto

Transformer

Total of Type Tests charges (Total of column 5 to be carried forward to Schedule 5: Grand

Summary)

Sl. No. Description of Tests Testing Location

220/132/11kV 3-Ph , 100MVA Auto Transformer

TEST CHARGES






#REF!Schedule No. 5: Grand Summary

1 TOTAL SCHEDULE NO. 1

Plant and Equipment including Mandatory Spares to be supplied from

abroad.


Plant and Equipment including Mandatory Spares Parts to be supplied

from within Nepal


Design Services


(a) Installation and construction charges

(b) Training charges for training to be imparted abroad

( c) Training charges for training to be imparted in Nepal

(d) Maintenance charges

(e) Type Tests charges for type Tests to be conducted Abroad

(f) Type Tests charges for type Tests to be conducted in Nepal

GRAND TOTAL FOR PART B [1+2+3+4]

VAT 13%

F&I

Custom Duties

Total in USD

Total in NRs.

Date: Signature:

Place: Printed Name:

Designation:

Common Seal:



Sl. No. DescriptionTotal Price Foreign

( )*

Total Price Local

( )*


220/132 kV NEW BUTWAL SUBSTATION KALIGNDAKI TRANSMISSION CORRIDOR PROJECT


Schedule No. 6: Recommended Availability/Optional Spares Parts and recommended Test Equipment in line with technical Specifications

Item No. Name & Description of

Parts

Name of Original

Manufacturer

Part No. Number of Units

in each set

Total No. of Sets

to be provided

Unit Price Total Price Remarks

Date: Signature:

Printed Name:

Designation:

Common Seal:



