ndm catalog 2013
DESCRIPTION
ÂTRANSCRIPT
www.ndm.no
dECK EquipmEnt For demanding conditions
oil & Gas
SE
marinE
SE
spECial produCts sErviCE
SE
dE
CK
Eq
uip
mE
nt
Fo
r de
man
ding
con
diti
ons
a Global suppliErYour trusted partner
Extensive engineering expertise combined with high level of customer focus and quality management makes us a reliable and innovative partner.
2
www.ndm.no
Since the foundation in 1989 Norwegian Deck Machinery has grown to be a well known supplier of equipment for the marine and offshore market. NDM offers complete system design, engineering, production, testing and lifelong services for all our products. Design is made to ensure trouble free operations and high reliability with a minimum of service required. We always cooperate closely with our customers, authorities and classification societies in order to provide the best possible solution weather it is for new building projects, modification projects or special engineering projects.
We aim to always be the best possible partner for our clients – providing them with strong support and fulfill all requirements for reliable and operational friendly equipment.
3
SE
SE
4 Marine
6 A Complete Supplier
8 Anchor Handling/Towing Winches
10 Secondary Winches
10 Storage Winches
1 1 Stern Rollers
12 A-Frames
13 Towing Winches
14 Active Heave Compensated Winches
15 Launch & Recovery Systems (LARS)
16 Windlass Winches
17 Mooring Winches
18 Mooring Systems
1 9 Tugger Winches
20 Capstans
20 Cargo Securing Winches
2 1 Constant Tension Winches
2 1 Bunker Reels
22 Winch Remote Control Systems
24 Oil & Gas 26 Bulk Loading Stations
29 XMAS & BOP Cranes
30 Umbilical Winches
30 Constant Tension Winches
3 1 Drill Floor Winches
32 Skidding Units/Systems
33 Drill Pipe & Drill Collar Latches
33 Special Engineering Services
34 special prOducts
36 Propeller Shaft Puller
37 Onboard Slipways
38 Cable Baskets
38 Cable Carousels
39 Transport/Handling Systems
40 Spooling Systems
4 1 Damage Repair Instructional Unit (DRIU)
42 service
SE
somE oF our rEFErEnCEs
Evita Island Enforcer Brave Tern Seabed Worker Viking Poseidon
marinENDM is a worldwide supplier of winches and handling equipment for the marine segment. Our main focus are products for offshore vessels, but we also supply equipment for tugs and merchant vessels.
Throughout the years we have developed an extensive range of products ranging from standard winches and on to advanced winches and equipment for lifting and handling of heavy loads.
Most of our clients operate in very demanding environments and they are in need of reliable equipment to meet the requirements set by the extreme conditions and todays challenges in offshore operations.
By being flexible and giving our clients high quality products according to their requirements in combination with a high level of service, NDM has managed to become a preferred supplier to both shipyards and shipowners.
For the toughest conditions you can rely on NDM as your partner for deck machinery. If you put NDM on maker`s list for your newbuilding projects we will offer you competitive and high quality equipment delivered on time.
4
SE
marinE
Skandi Gamma Stril Mermaid Skandi Constructor Normand Pacific Island Intervention
5
6
mariNE
a ComplEtE suppliEr
Chain rollers
Stern rollers – double type
AHT winch – triple drum models
Stern rollers – single type
Chain pulling winches
AHT winch – double drum models
6
SE
7
SEa ComplEtE suppliEr
Secondary winches
Combined windlass-mooring winches
A-frames
Storage winches
Capstans
Tugger winches
7
8
mariNE
anChor handlinG/towinG winChEsFor all types of AHTS, NDM offers a wide range of anchor
handling/towing winches.
Winches are offered with hydraulic drive and with spooling
device according to client’s requirements. Our winches are
delivered with advanced bridge control systems Including all
required functions and automation, in addition to the local
controls on the winches. The rugged design ensures trouble
free operation under demanding conditions.
NDM offers a range of anchor handling/towing winches up to
500 T capacity (line pull at 1st layer).
• Hydraulic driven
• Double (waterfall or side-by-side) and triple (waterfall) drum configurations
• 150–500 T rated line-pull on first layer
• Up to 670 T brake holding
• Hydraulic operated brake
• Dynamic breaking to facilitate high load/high speed lowering without de-clutching
• Delivered with spooling device
• Local control for maintenance
• Remote control (on bridge) for operation
Winches are available in following configurations: • Double drum waterfall
• Triple drum waterfall
• Side-by-side
The winches are of heavy-duty box frame type construction
with the main drums running on spherical roller bearings. All
drums are de-clutchable.
Winch operating modes:There are several defined operating modes which can be used
when committing different types of work:
• Hoisting
• Lowering
• Speed lowering
• Dynamic breaking
FeatureSFeatureS
SE
9
SE
Motors The workhorse of our AHT winches is the radial piston hydraulic
motor. This motor has up to 98 % volumetric efficiency under
ideal operating conditions. It has proven to function well in
many tough applications in In both heavy landbased industry
and in the offshore industry.
The motors are fitted with custom made load holding manifolds
which have several functions. The manifolds will close the
lift side if the pressure in the lowering side comes down to a
pressure where cavitation could occur. This ensures that the
load is held if a pipe is ruptured and also makes sure that the
motors never can cavitate.
In addition to the load holding function, the manifolds are
equipped with a free-wheeling function that can rapidly let the
motor rotate freely without any torque being transferred.
The manifold also includes pressure relief functions and boost
pressure inlet.
Main control valve The motors are being controlled by a high response industrial
proportional valve. This very fast and accurate valve enables us
to control the rotational speed and requested pressure acting on
the motors.
Gear stepsThe free-wheeling function is also used to create different gear
steps. By disconnecting one or a number of motors, the entire
Dobbel Drum Winches Triple Drum Winches
flow from the HPU can be used by fewer motors, creating a
higher rotational speed. This is very useful if a light load is being
used or if the wire without load needs to be rapidly raised from
the seabed.
The motors active in different steps are changed automatically
to have an even wear of all components. The gearing is fail-safe
and does not allow activation if the actual load is too high for
the requested gear step.
SafetySafety is a key issue. The hydraulic system has several safety
features and important functions which are backed up by battery
power and sometimes by energy stored in accumulators.
All critical functions are hardwired to work even if the control
system for some reason is inoperable.
10
mariNE
storaGE winChEs
NDM offers a wide range of secondary winches for AHTS vessels.
These winches can be delivered in various configurations and
with various pull and brake holding capacities.
The secondary winches combine large storage capacity of wire
and rope with higher pulling force. The secondary winches can
be used for transfering wire and rope to other winches while
maintaining a solid back-tension and thus enabling a higher force
used on the wire and rope during deployment.
sECondarY winChEsAn AHTS vessel normally consists of one (1) or two (2)
secondary winches where each of them has a storage capacity
of up to 1600 m Ø 203 mm synthetic rope or up to 4000 m or
Ø 76 mm steel wire. Our secondary winches are delivered with
a pull capacity from 100–200 T.
These winches are always equipped with a spooling device to
ensure safe spooling onto the drum.
FeatureS
Drive: Hydraulic
Configuration: Single drum
rated pull (1st layer): 100–200 T
Speed: To suit operational requirements
Clutch: Hydraulic operated
Brake: Hydraulic operated band brake
Control: Local and/or remote control
Drive: Hydraulic or electric
Configuration: Single drum
rated pull (1st layer): 10–60 T
Speed: To suit operational requirements
Brake: Manually operated band brake
Control: Local and/or remote control
NDM offers a range of storage winches/rope reels for vessels.
These winches can be delivered in various configurations and
with various pull and brake holding capacities.
The storage winches are used for storage of spare towing rope for
the main anchor handling/towing winch.
FeatureS
SE
11
SE
• No steel work is necessary after the welding flange is attached to the hull
• A man hour reduction of minimum 75 % compared to a traditional roller during installation
• When dismounting and mounting the stern roller, there is no need for steel cutting or grinding to get the stern roller out
• By using pressure lubricated bearings, the stern roller will turn with a minimum of friction
• All in all, the short ended stern roller will be beneficial for both the shipyard (during installation) and ship owner
(during operation and maintenance).
aDvaNtaGeS
NDM delivers a unique and revolutionary stern roller, short ended type. The short ended
stern roller operates as any other stern roller.
But what’s unique is the labor and cost saving way the short ended stern roller is attached
to the ship’s hull. The unique way of attaching the short ended stern roller, is due to the fact
that the shaft is the same length as the stern roller itself, and is fastened to the ship’s hull by
means of a welding flange and a fastening flange bolted to the shaft and welding flange.
One flange is welded to the shaft, while another flange is welded to the ship’s hull.
This enables the roller to be installed much more efficiently than with a more traditional
solution. The same advantage is off course prevailing if the roller needs to be removed for
maintenance or adjustments.
Our stern rollers can be delivered from SWL 50 T (single models) and up to SWL 750 T
(double models) to fit all types of AHTS vessel and capable of working on all required loads.
stErn rollErs
Single model
Double model
12
mariNE
FeatureS optioNS
a-FramEsNDM offers a wide range of A-frames with a lifting capacity ranging from 10 T to 250 T
(others models are offered on request) and a working out-reach/in-reach of up to 25 m.
Our A-frames are delivered for either stern or side mounting. All A-Frames are delivered
according to clients requirements/specifications. Several options are available. Wire may
enter the A-Frame directly onto the center sheave or through sheaves up along one of
the legs.
our a-frames can be designed for the following purpose:• Anchor handling
• Plough handling
• Well intervention (module handling)
• Subsea handling (with use of AHC winch)
On request the A-Frame sheaves can be equipped with a load measuring device
• Hydraulic driven
• SWL from 10–250 T
• Rough design to meet requirements for use in harsh environments
• Easy to assemble/disassemble on deck
(can easily be moved from vessel to vessel)
• Local and/or remote control (from bridge)
We also supply special A-Frames for research vessels
• Winches (with or without AHC)
• Power units (integrated or stand-alone units)
• Tugger winches/guide wire winches
• Sheave arrangement with lower to deck function
• Remote control
• Bolted deck interface
SE
13
SE
FeatureS optioNS
Drive: Electric or hydraulic
Configuration: Single or double drum
type of drum: Rope or steel wire
rated pull: 30–250 T
Speed: To suit operational requirements
Clutch: Hydraulic operated
Brake: Hydraulic operated band brake
Control: Local and remote
• Electric or hydraulic
• Single or double drum – linear or waterfall configuration
• With or without Spooling device
• Tension/auto tension
NDM delivers a wide range of towing winches for all types of tugs, also combined with cable
lifters. We also supply towing winches for various types of offshore vessels (PSV and stand
by vessels). These can be powered by electric or hydraulic drive and with drum capacity
according to clients request. The winches are delivered with joystick bridge control including
required functions and automation, in addition to the local control on the winch.
The wire spooling system ensures excellent wire spooling of extremely long wires without
the need for a defined minimum distance between the winch and the first wire sheave.
Our rugged design made by experienced engineers, ensures trouble free operation under
extreme conditions.
Forward towing winches for tugs can be delivered according to customers requirements,
also according to active escort tug requirements. The towing winches aft. on the vessel are
delivered either in single or double drum configurations (water fall or linear configurations).
towinG winChEs
14
mariNE
FeatureS
aCtivE hEavE CompEnsatEd winChEsActive Heave Compensated winches filter out the effect of the
wave movement, allowing for more accurate data readings,
increasing equipment safety and reducing weather-related
down times.
The Active Heave Compensated (AHC) winches from NDM
are designed for rough and demanding operations in offshore
conditions. Our precise systems prevent unwanted undulation
or heavy sea movement causing sudden slack or pull on the
cable, stressing the cable and making the equipment at the
end of the umbilical unstable.
Modes:• Normal Mode
• Constant Tension
• Active Heave Compensation
• Active Heave Compensation Empty Hook
Control systems: Local and/or remote control. The control system can be
delivered with different configurations ranging from a simple
control unit and on to advanced systems with multiple
displays and data recorders.
Drive: Driven by secondary controlled hydraulic motors
Configuration: Single drum
type of drum: Umbilical or steel wire drum
SWL: Up to 100 T
Lifting height : 100–3000 m
SE
15
SE
NDM delivers complete launch and recovery systems (LARS) for ROV handling.
NDM supplies a variety of launch and recovery systems (LARS) for ROVs and robotic tools.
These systems are designed to withstand extreme dynamic forces, ensuring safe and
efficient subsea operations in the most demanding environments worldwide.
Our systems is designed to handle ROV`s operating down to 7000 m depths.
Our LARS systems are designed to achieve maximum outreach and lowering, to ensure
that the ROV’s are handled out as far as possible and as close to the splash zone during
launch and recovery. These functions are crucial during operation in harsh weather where
waves and wind can push the ROV towards the vessel structure.
To ensure the the best uptime and safe operation of the entire system, focus on personnel
safety, accurate handling and easy maintenance forms the basis of our design.
our LarS systems can be delivered with the following configurations:• A-frame LARS system
• Crane based LARS system
• Deck mounted
• Hangar mounted
launCh & rECovErY sYstEms (lars)
The images shows a LARS system we have delivered to NIOT in India. This system is designed for operation down to 7000 m water depth
16
mariNE
FeatureS optioNS
Whatever your anchor application is, our line of windlass winches offers a variety of
styles and sizes to handle it. Standard features include fabricated steel construction, gears
hardened to exceed working load requirements, clutched and braked drum and corrosion
resistance. Electric or hydraulic drives are available along with warping heads. We can
modify windlasses to suit your application and special operating requirements.
NDM’s windlass winches have rugged design and heavy duty split bronze bearings.
The operating mechanism for brakes and clutches are designed for easy and safe
manual operation, but may also be remotely operated by hydraulic cylinders.
The brakes are easily adjustable. The winch design provides easy access to all points for
lubrication and inspection.
Drive: Electric or hydraulic
rated pull: 5–30 T
Configuration: Single or double
Chain size: 16 mm to 160 mm
Clutch: Manually operated
Brake: Manually operated band brake
Control: Local and/or remote control
• Auto tension/tension control.
• With or without mooring drum.
• With or without warping end.
• Remote controlled (from bridge or radio remote)
• Chain length and/or speed measurement
• Bridge operated anchor drop
• Hydraulic operated drum break
• Dynamic lowering
windlass winChEs
Windlass winches without cable lifters, wire drum models, can also be delivered.
SE
17
SE
FeatureS optioNS
NDM offers mooring winches with almost unlimited speed and line pulls. The delivery
program coversmooring winches for all types and sizes of vessels.
NDM’s mooring winches have rugged design and heavy duty split bronze bearings.
The operating mechanism for brakes and clutches are designed for easy and safe manual
operation, but may also be remotely operated by hydraulic cylinders. The brakes are easily
adjustable.
The winch design provides easy access to all points for lubrication and inspections. Mooring
winches are supplied with a pulling capacity from 5 to 40 T and are available in single, double
or triple drum configuration, in addition to split drums.
moorinG winChEs
Drive: Electric or hydraulic
Configuration: Single or multi drum
type of drum: Rope
rated pull: 5–40 T
Clutch: Manually operated
Brake: Manually operated band brake
Control: Local and/or remote control
• Auto tension/tensioning control.
• Hydraulic operated brake
• Hydraulic operated clutch
• With or without warping end
18
mariNE
FeatureS optioNS
moorinG sYstEmsNDM offers a range of mooring systems suitable for various
kind of offshore vessels which requires advanced mooring.
Our mooring systems consist of multiple mooring winches and
a centralized control system (in addition to the local control on
each winch).
Our systems are equipped with wire rope tension and payout
length control. The winches can either be in single drum or
double drum configuration and are equipped with spooling
device to ensure safe spooling of wire/rope onto the drum.
The winches are capable of emergency release under a
combination of all of the following conditions: Deadship (by use
of accumulators), brake on and hoisting/lowering conditions.
our mooring systems can be delivered in the following configurations:
• 4-point mooring
• 8-point mooring
• 12-point mooring
• 16-point mooring
Our winches for mooring systems are
delivered with a pulling capacity from 20–100 T
and with a drum capacity up to 2000 m
of wire or rope.
Drive: Electric or hydraulic
Configuration: Single or double drum
Warping end: With or without
type of drum: Rope or steel wire
rated pull: 20–100 T
Clutch: Manual or hydraulic operated
Failsafe brake: Manual or hydraulic operated
Safety: Emergency quick release
Control: Local and/or remote control
• Auto tension/tension control
• Remote controlled (from bridge or radio remote)
• Rope length and/or speed measurement
• Bridge operated anchor drop
• Water cooled brakes
SE
19
SE
FeatureS optioNS
tuGGEr winChEsNDM offers a wide range of tugger winches powered by electric or hydraulic drive.
The rugged design made by experienced engineers ensures trouble free operation.
NDM’s tugger winches are designed for the extreme conditions onboard vessels.
Drive: Electric or hydraulic
Configuration: Single drum
Warping end: With or without
type of drum: Steel wire rope
rated pull: 5–30 T
Drum capacity: 100–600 m
Clutch: Manually operated
Control: Local
• Deck mounted
• Wall mounted
• Slack rope speed
• Remote control
• Secure grid
20
mariNE
CarGo sECurinG winChEs
All capstans are availiable with electric or hydraulic drive.
The electric capstans can be incorporated directly into the deck
construction by means of a foundation pipe piece. The foundation
is open at the bottom and makes it easy to connect the motor from
below deck.
The electric capstans are delivered with DOL or frequency converter
for variable speed.
Our hydraulic capstans are designed with the complete drive system
inside the capstans in order to save space onboard the vessel.
Delivery range: 3–15 T.
Our CSW meets the highest standards of use at a very
competitive price.
FeatureS
Drive: Electric or hydraulic
rated pull: 3–15 T
Control: Local and/or remote control
FeatureS
Drive: Hydraulic or electrical
Configuration: Single drum
rated pull (1st layer): 3–5 T
Control: Local control
NDM has developed a powerful and robust range Cargo Securing
Winches (CSW) which is designed for use in the most difficult
environments on board PSC vessels. The winches is with one
single drum and can be delivered with a wire capacity according
to our clients requests.
For best possible use on deck, the winch is built with manual
disengagement/freewheeling. Our CSW has a rated capacity of
3-5 T with a brake holding capacity from 5 T. To maintain the
safety on deck, the CSW is delivered with “failsafe” brake with
hydraulic deactivation.
Capstans
SE
21
SE
We deliver different types of bunker reels for vessels. The bunker
reels are offered with capacities according to our clients requests
and can be delivered with or without spooling device.
FeatureS
Drive: Electric or hydraulic
Configuration: Single drum
type of drum: Steel wire drum
rated pull: 5–10 T
Control: Local and/or remote control
bunKEr rEEls
NDM delivers a range of constant tension (CT) winches. These
winches are normally used during crane operations (to secure
the load during lifting operations).
Our CT winches are designed for rough operation in harsh
conditions on deck. The hydraulic system is pre-set through an
external relief valve to limit the winch line pull a pre-determined
load. This load is achived by securing the winch rope to a fixed
point and then locking the winch directional control lever into
the pay-in-position.
Bunker reels are used on different types of vessels like seismic
support, FPSO and others. As a turn key supplier we can also
deliver the bunker reels with the needed hoses and couplings.
The bunker reels can also be delivered with spooling device
Constant tEnsion winChEs
FeatureS
Drive: Electric, hydraulic or pneumatic
rated pull: According to clients request
Configuration: Single drum
Control: Local and/or remote control
The winch will hydraulically stall at the pre-determined
pay-in-load setting. If the winch should be influenced by a
greater external force than that the pay-in load setting, the
winch rope effectively pulls from the winch drum. When the
external force sunsides to less than the pay-in load setting, the
winch will automatically pay in whilst keeping constant tension
within the winch rope.
Our constant tension are normally delivered with a pull
(1st layer) of 5–10 T but other models can be delivered.
The image shows a bunker reel delivered to Uksnøy Rederi. The reels is delivered to handle 250 meter 5” hose with swivel.
22
mariNE
New sentence: We are able to meet all your requirenets from
standard radio/remote controls and on to more advanced,
systems installed on bridge. With large and complex winches
installed on your vessel our clients rely on a control system
which makes sure that high loads can be handled in high
speeds with high pull without danger for either the crew or
the vessel. All our equipment is always designed with safety
features as our main priority and our control systems ensures
that these features are easy to operate.
All our systems are well proven to work under demanding
conditions and enables accurate winch control. For smaller
winches, we normally supply either portable or radio remote
control units. Theese allows the operators to operate mooring
or tugger winches from different locations on deck. By use
of remote controls, the operator will gain better control of
the operation and ensures that safety safety is improved at
a higher level.
For our largest and most advanced winches, we deliver
complete bridge (wheelhouse) installed control systems. These
systems are tailor made to control the winches in complex
operations, ensuring safe and accurate operations.
With large and complex winchesinstalled, one must be able
to rely on a control system which ensures that high loads can
be handled efficiently with high speed and high pull without
danger for the crew or vessel. All our equipment are
always designed designed with all needed safety features.
The control systems ensures that theese features are easy
to operate.
the bridge remote control systems are typically used for:• Anchor handling/towing winches
• Secondary winches
• Active heave compensated winches
• 4, 8, 12 & 16-point mooring systems
All these bridge installed control systems are designed for
constant monitoring of the winch systems. Safety is always the
main priority and therefore we ensure that alarms always will be
given if fails occur. All critical functions are hardwired to avoid
dangerous situations even during the worst conditions. Quick
release and emergency release are always available, no matter
what conditions you experience.
We can also deliver a data recording system together with our
bridge installed control systems. All winch data are constantly
recorded and stored in files. Recorded data can be played back
on the LCD screen. This gives simple access to historical data
and lets you monitor how a situation develops, or analyze
previous recordings.
To operate high duty winches in complex operations,
you need reliable control systems.
winCh rEmotE Control sYstEms
SE
23
SE
Together with our largest and most advanced winches we
can also deliver operating chairs specially developed for
operation of winches. The control system is incorporated in
the chairs and gives the operator full access to all functions
within arms length.
The operating chairs meets the needs and levels of comfort
required when operating the winches in offshore conditions.
winCh opEratinG Chairs
Radio remote control unit Winch Operating ChairCapstan DOL control
24
rEFErEnCEs
Bideford Dolphin Borgland Dolphin Bredford Dolphin Grane Oseberg A
oil & Gas NDM has long and extensive experience in delivering equipment for the oil and gas segment. We have specialized in custom built mechanical equipment ranging from winches, BOP cranes and bulk loading stations on to skidding equipment and other handling equipment.
Independently of project size, we emphasize to deliver high quality products on time and made to work in the harsh environment onboard oil rigs.
We cooperate closely with each customer to ensure that we always find the most beneficial solution for our clients.
Our base of engineers possess comprehensive technical expertise on mechanical and structural design and calculation in addition to associated documentation requirements needed to meet CE–marking, NORSOK, NS5820, DNV and others.
24
SE
oil & Gas
25
Polar Pioneer Rowan Stavanger Statfjord B West Linus Heimdal
25
26
Oil & Gas
Effective loading of fluids and dry bulk materials between supply vessels and fixed
or floating production units are necessary to maintain continuous operations.
NDM has developed and delivered solutions for safe and reliable hose handling even
during the most harsh and extreme offshore conditions.
Installing bulk loading stations with hose reel winches, gives several advantages:
advantages:• Increased safety for equipment and personnel in hostile offshore environments
• Less time needed for operation
• Reduced need for operating personnel– one man operated
• Enviroment protection and protection from spillage
• No more long hours of exposure to sunlight resulting in longevity of hose life
• Increased lifespan of the hoses due to less wear and tear
• Easy access for maintenance and service
bulK loadinG stations
FeatureS optioNS
Drive: Electrical, hydraulic or pneumatic
Number of reels: 1–16
Hose type: Softwall or hardwall
Hose lengths: Up to 120 m
Control: Local and/or remote
Diameter of hose: 11/2”– 8”
Zone (typical): Zone 1, Gas Group 11A/11B, T3
• With or without skid foundations
• Environmental protection
• Safety guards against reels for operating personnel
• Lifting equipment (lifting yoke)
• Delivered with or without hoses
• Wanderlead or radio control after: with or without skid
foundations
SE
27
SE
Bulk loading stations from NDM are designed according to
prevailing rules and regulations and can be delivered for a
variety of hoses and lengths.
We can deliver standard solutions or custom design, suitable
for both new buildings and upgrading’s. For upgrading’s and for
modifications we calculate and design the station according to
the existing structures and cargo pipes onboard the rig.
The stations can be connected to ring line onboard the rig or be
delivered with dedicated HPU`s. Stations can be delivered with
a range of control options according to customer`s request.
a typical station will be fitted with reels for 60 m of 4” or 5” softwall hoses with floating element/floating hose for mediums like: • Diesel • Bentonite/Barite etc.
• Oil based Mud • Cement
• Water based Mud • Brine
• Potable Water • Base Oil
• Drill Water
Hose reels from NDM are delivered with a closed gear solution
to reduce the need for maintenance.
Reels are normally delivered in carbon steel, but can be delivered
in stainless steel or aluminum on request.
Spooling device for bulk loading stations
NDM has developed spooling devices for bulk loading stations.
For older hose reels the drums are sometimes made to wide
and correct spooling of the hose can be a problem.
The picture shows the spooling device we recently have
delivered for the Grane platform, operated by Statoil.
The equipment is delivered calculated and certified to fit
existing structures on Grane and design is made to ensure
easy maintenance onboard the rig.
NDM can deliver custom made spooling devices according to
size and number of reels.
28
Oil & Gas
NDM designs various structures to fit our hose reels. We deliver
standard foundations or custom made foundation structures
including all necessary piping and interfaces.
Lack of space for installing the equipment is often a key issue
for this kind of projects. NDM has delivered a range of various
foundation structures designed to fit the existing structures
onboard the rig and to reduce the space needed for the station.
We deliver solutions to be placed on deck and solutions
for beeing mounted outside on the box girder in addition to
stacked solutions Certification is done according to project
specific requirements.
bulK loadinG rEEls & stations – modEls
Foundation struCturEs
Single bulk loading reel with skid foundation Double bulk loading reel with skid foundation
Multiple reel station with skid foundation
Double reel with safety guard Double bunker reel without skid foundation for mounting on to deck structure
Multiple reel station with skid foundation, stacked unit
We always aim to find solutions that will reduce cost, weight
and installation time for our customers without compromising
on quality.
SE
29
SE
FeatureS optioNS
NDM delivers Offshore BOP Gantry and Semi Gantry Cranes for the new generation of
drilling rigs. Today the weight of the BOP valves can reach up to 400 T. To cope with such
heavy equipment handling needs, we deliver Offshore BOP Gantry Cranes with lifting
capacity of up to 500 T and a lifting height of up to 30 m.
The hoisting systems consist of two main winches, each with lifting capacity from 20 T and
up to 250 T. The BOP Cranes can be delivered with hydraulic or electrical drive and are adapted
to work in a potential explosion zone.
We use advanced strength calculation methods to minimize the weight of the BOP cranes.
A well thought arrangement with service platforms and ladders provides the necessary
access to all areas and allows the crane operations and maintenance to be carried out
safely and easily.
Xmas & bop CranEs
Drive: Electric or hydraulic
Lifting Capacity: 2 x 20 T – 2 x 250 T
Hoisting speed: According to clients requests
Lifting height: Up to 30 m
area classification: Safe Zone/Zone 2/Zone 1
NDM’s electrically driven, frequency controlled, BOP trolley during load test onboard the rig Bredford Dolphin.
• Two speed hydraulic motors to achieve «light line speed»
(higher speed at low loads)
• Guiding system which enables operation in harsh conditions
• Auxillary winch
30
Oil & Gas
NDM’s umbilical winches are designed for all types/sizes of
umbilical. Our range cover standard and tailor made umbilical
winches available in single or various multi drum configurations. All
our umbilical winches are normally equipped with spooling device.
The umbilical winches can be delivered with hydraulic, electrical or
pneumatic drive.
Constant tEnsion winChEs
the pre-determined pay-in-load setting, then the winch be
influenced by a greater external force than that the pay-in
load setting then the winch rope effectively pulls from the
winch drum. When the external force subsides to less than the
pay-in load setting, the winch will automatically pay in whilst
keeping constant tension within the winch rope.
Our constant tension winches are typically delivered
with line pull (1st layer) from 5–10 T.
Other models are offered on request.
Drive: Hydraulic
Configuration: Single drum
rated pull: 5–10 T (standard configuration)
Drum capacity: According to clients request
Spooling device: According to clients request
Control: Local and/or radio remote control
NDM offers a range of constant tension winches for oil rigs
and floating production units.
Our CT winches are designed for rough operation in harsh
environments on deck.
The hydraulic system is pre-set through an external relief valve
to limit the line pull of the winch at a predetermined load.
This load is achieved by securing the winch rope to a fixed
point and then locking the winch directional control lever into
the pay-in-position. The winch will hydraulically stall at
umbiliCal winChEs
Umbilical winches can be designed for deployment and recovery
of the product, or simply for storage of the product when not in use.
Our winches can be designed to suit a wide range of products and
can be manufactured with swivels and/or slip rings if it is necessary
for the umbilical to be live during deployment or recovery.
FeatureS
optioNS
• Payout and line speed display
• Remote control
• Lifting frame
• Lift frame certification (DNV approval)
SE
31
SE
FeatureS optioNS
NDM delivers a complete range of drill floor winches. Our range
of winches covers standalone winches together with complete
integrated winch units/systems. Our drill floor winches are
designed to work under the harsh environments in the North
Sea and our main focus is safe and reliable operations.
our range of drill floor winches consists of the following: • Utility winches
• Guideline winches
• Podline winches
Our winches are delivered as complete units, fully tested and
ready for mounting by means of bolting to rig substructures.
All winches are fitted with lifting lugs for safe and easy handling.
drill Floor winChEs
Drive: Electric, hydraulic or pneumatic
Drum Capacity: According to customers request
Spooling device: According to customers request
Control: Local and/or remote control
• Payout and line speed display
• Remote control (radio remote)
• HPU (for hydraulic models)
32
Oil & Gas
NDM is supplier of various hydraulic skidding systems
for transport of heavy loads for both offshore and onshore
installations.
We deliver “ Gripper Jack” and “Claw” type skidding systems
for moving heavy loads along beams with high positioning
accuracy, making sure the load is transported safely into its
position.
Systems are designed for a range of different load capacities
and adaptable to different dimensions of flange width and
flange thickness on the skidding beams according to customer`s
project requirements.
The model shows a skidding system delivered for Rubicon
2000 modular drilling rig.
The skidding system consists of two similar skidding units
operating on two skidding beams. Each unit is equipped with
one hydraulic push/pull cylinder. The skidding unit is built up by
one traverse beam connected with two clamping units.
Each clamping has two hydraulic cylinders. The clamping unit
fix the skidding unit to the flange during each work stroke.
sKiddinG units/sYstEms
Skidding system delivered for Rubicon 2000 modular drilling rig. Max skidding weight (each system) is 156 T.
Total skidding capacity is 2000 T.
Skidding system delivered for Rubicon 2000 modular drilling rig. Max skidding weight (each system) is 156 T. Total skidding capacity is 2000 T
Claw type skidding system.Over-beams are fitted with a pull cylinder and claw. The cylinder pulls
the steel section, attached to the over-beam along the under-beams.
Skidding direction
Steel structure
SE
33
SE
EnGinEErinG sErviCEs
NDM delivers latches for drill pipes and collars in various
configurations.
the latches are used on fingerboards on drilling rigs. each latch consist of the following:1 x Supporting steel structure
1 x Latch finger, long enough for support on opposite latch
1 x Pneumatic single acting spring return cylinder
1 x Shaft for latch
2 x Shaft for connecting of cylinder
Equipment is designed according to project specific capacity
requirements and pipe sizes.
NDM can perform advanced mechanical and structural analysis
on request.
We have extensive experience in using advanced and accurate
calculations and analyzing methods in combination with
structural and mechanical design.
Our skilled workforce are familiar with the application of all
rules and regulations typically adopted in the offshore industry,
e.g. NORSOK, DNV, NS and others.
drill pipE & drill Collar latChEs
The images shows a calculating and analyzing project we delivered for the living quarter installed by Apply Oil & Gas
onboard the jack up rig “Rowan Stavanger”
34
rEFErEnCEs
spECial produCts Existing ways of doing operations can be improved by developing new and innovative equipment. NDM has since the start in 1989 been a provider of custom-built solutions which add economical, technical, environmental and/or safety value to existing technologies.
Concept development and product supply
NDM has extensive experience in customized solutions. Throughout the years we have delivered a range of products that just started out as an idea or a problem and turned out to be a complete turnkey product.
Our typical projects are purpose-built mechanical equipment and structures for marine or offshore operations and onshore equipment like shipyard equipment and equipment for general mechanical industry.
We take care of the total process from idea to concept development through design and manufacturing and all the way on to delivery, installation, start up, training and lifelong service.
Our experienced engineers solves the most complex problems and always aim to find the most cost effective solution for our customer without compromising on quality.
We possess all the technical expertise and associated documentation requirements needed to meet CE-marking, NORSOK, NS5820, DNV and others.
34
Damage repair simulator Onboard slipway Propeller shaft puller Plant for cleaning of drillpipes
spECial
35
spECial produCts Existing ways of doing operations can be improved by developing new and innovative equipment. NDM has since the start in 1989 been a provider of custom-built solutions which add economical, technical, environmental and/or safety value to existing technologies.
Concept development and product supply
NDM has extensive experience in customized solutions. Throughout the years we have delivered a range of products that just started out as an idea or a problem and turned out to be a complete turnkey product.
Our typical projects are purpose-built mechanical equipment and structures for marine or offshore operations and onshore equipment like shipyard equipment and equipment for general mechanical industry.
We take care of the total process from idea to concept development through design and manufacturing and all the way on to delivery, installation, start up, training and lifelong service.
Our experienced engineers solves the most complex problems and always aim to find the most cost effective solution for our customer without compromising on quality.
We possess all the technical expertise and associated documentation requirements needed to meet CE-marking, NORSOK, NS5820, DNV and others.
35
Cable carousel Spooling device for umbilicalCable basket Flange welding machine
36
special products
FeatureS StaNDarD MoDeL (20 T SWL)
NDM delivers Propeller Shaft Puller Systems ranging from
20 to 80 T SWL.
The systems consist of a puller unit, a fork for taking down
rudders and one or more support units. In addition it can be
delivered with equipment for taking down thrusters.
The system is hydraulically driven and safely and quickly
pulls out the propeller and shaft without man driven hoist. It
reduces the risk for damaging the shaft during maintenance and
inspection and improves safety for the operating personnel.
The Puller unit and support units are adjustable in vertical and
horizontal direction and are easily operated from the control
valves on the puller unit.
propEllEr shaFt pullEr
The whole operation is done in only a few hours.
With today`s off hire costs this gives huge savings for the ship
owners and a competitive advantage for the repair yard.
The system can be delivered tailor made to customer`s request.
PULLER UNIT:
Lifting capacity: 20 T
Driving length, standard: 20 m
Working envelope, vertical: 1,5-4,0 m
Working envelope, horizontal: +/- 75 mm
SUPPORT UNIT:
Load capacity: 20 T
Working envelope, vertical: 2,0–3,5 m
Working envelope, horizontal: +/- 200 mm
SE
37
FeatureS
onboard slipwaYsNDM is supplier of single and double onboard slipways for
launch and recovery of daughter crafts onboard both offshore
and naval vessels.
The onboard slipways ensure safe docking of rescue boats and
other smaller vessels used onboard the “mother ships”.
The slipways from NDM are designed to handle daughter crafts
up to 12 m length, but we can also deliver “tailor made” solution
according to our clients requests.
The slipways are installed on the aft of the vessel and can be
delivered either with a freewheeled solution or with hydraulic
driven wheels for entering the mother vessel. It can also be
delivered with a separate winch for pulling the daughtercrafts
into the slipway.
Systems can be delivered mounted on an hydraulic controlled frame
or for for beeing mounted directly on to the structure of the vessel.
Drive: Hydraulic
Control: Local and/ or remote controlled
Wheels: Hydraulic driven or freewheeled
Foundation/frame: According to project specifications
The image shows an onboard slipway installed on the vessel “Havila Troll”.
The illustration shows a double slipway specially developed
for navy vessels
38
special products
200 T cable basket
100 T cable basket with electrical drive300 T cable basket
CablE CarousEls NDM delivers cable carousels which easily converts ordinary
offshore vessels into cable layers.
Our cable carousels can be delivered in various sizes and
configurations to meet all requirements and drive can be either
hydraulic or electrical. The carousels can be divided in several
compartments if needed.
Our models are designed to meet all the rough conditions on
offshore vessels to ensure safe and reliable operation onboard.
Systems are delivered according to customer`s requirements
including control systems, tensioners, loading arms, access
stairways and ladders.
each carousel consists of three main parts:1. Part one is the lower part of the cable carousel and is
a grillage structure.
2. Part two is the rotating carousel with deck and movable
flanges for adaption to different cable sizes
3. Part three is the drive system and can be delivered either
hydraulic or electrical
CablE basKEts NDM is supplier of baskets for transportation and storage of
cable. We design equipment for a variety of storage capacities,
lengths and dimensions of cable.
We always aim to make the design as light weighted and user
friendly as possible. All baskets are calculated and certified
according to project specifications.
If wanted the baskets can be delivered with electrical
drive system.
SE
39
transport/matErial handlinG sYstEmsNDM is a supplier of custom made transport and material
handling systems for the offshore and onshore market.
We can solve most problems for our customers, weather it is to
improve HSE, meet new regulations, improve a process or just
solve lifting challenges.
our range varies from plain lifting beams and on to advanced handling and production systems.
• Material handling studies
• Custom made material handling solutions
• Material handling in combination with automated processes
• Spreader Beams
• Lifting Equipment
• Transport Systems
• Lifting and Access Platforms
Transport wagon for risers
1. Fully automated handling system for receivers onboard
seismic vessels
2. Fully automated plant for upgrading and cleaning of drill pipes
3. Side launching system for vessels at yard
4. Washing machine for drill pipes
1.
2.
4. 3.
40
special products
FeatureS
NDM is supplier of tailor made spooling systems for correct spooling and storage of wire,
cable, hoses, fiber rope and umbilical.
Spooling systems are delivered electrical, hydraulically or pneumatic driven.
The spooling systems from NDM are designed for use in various operations and are
adapted to various sizes of drums.
Our systems are well proven and used by our clients on both on land based projects
(supply bases) and at sea (onboard vessels).
All systems are designed and delivered according to customer`s project specifications
and with the required documentation and certification.
spoolinG sYstEms
FeatureS
Drive: Electrical, hydraulic or pneumatic
Spooling drum: With or without
Spooling tension: According to clients request
Control: Local and/or remote control
Spooling device and spool back drum delivered for Aker Oilfield solutions for use onboard Skandi Aker.
Spooling winch for spooling of cable delivered
for Coast Center Base.
SE
41
FeatureS
NDM is a supplier of Damage repair simulators for training of naval recruits in handling
emergency situations. The Damage Control Simulators are built to replicate the inner design
of a ship and simulates the damages typical for a ship in battle, like running aground, or
being hit by grenades, torpedoes or bullets.
Representing the motion of the sea the simulator rolls whilst cold water floods in from
various “damage points”.
This simulator has 23 different training objects and can train up to 24 students at a time.
The images shows the damage repair simulator delivered to Haakonsvern Naval academy
in Norway.
Encouraging quick thinking and fast response, high level of communication and teamwork,
training in simulators provides a unique practical learning experience for the people involved.
• 23 various training objects
• Drainage system
• Hydraulic system for movement
• Water supply, high and low pressure
• Complete control system
• Light, heating and electrical cabling
• Ventilation plant
damaGE rEpair instruCtional unit (driu)
worldwidE sErviCE sErviCE & aFtEr salEs NDM support customers with safe, reliable and cost-efficient service activities throughout the lifetime of the product. Highly trained and experienced technicians are ready to access all of our customer`s needs.
• Technical support and assistance• Equipment installation and training• Commissioning• Testing• Annual service• General Maintenance, repair and upgrading• After sales/spare parts• In house engineering support.
• Service personnel available at short notice
42
SE
sErviCE
lonG-lastinG support sErviCEsNDM believes that it is in our and our customers’ interests to
keep close contact not only during the purchase period, but also
throughout the equipment’s lifetime. In that way our customers
will get the best product and we will continue to improve.
Our responsibility does not stop after installation!
Our service staff, together with our network of service agents,
ensures that we are able to help our clients no matter where in
the world their vessels are located.
worldwidE sErviCENDM has trained & authorized service personnel ready to assist
you worldwide with all supplied equipment. We can also offer
training and authorization to our service partners and customers.
ComissioninG and annual sErviCEAll commissioning of equipment delivered by NDM is done by
either service staff from our main office or by authorized service
personnel from our service agents.
This ensures that the equipment is proven to work before the
vessel or rig leaves the yard.
We can also provide annual service agreements to our
customers. For an annual fee we will then do yearly inspections
of the delivered equipment to prevent down time in operation.
aFtEr salEs and sparE partsNo matter where your vessel or rig is located, we will always
make sure that our after sales services and spare parts are
available in a short notice.
43
Norwegian Deck Machinery aSUlvenvegen 34, N-5210 Os, Norway phone: +47 56 30 32 80Fax: +47 56 30 32 82e-mail: [email protected]: www.ndm.no
Pho
tos:
ND
M, S
hutte
rsto
ck, R
une
Joha
nsen
, Sta
toil.