nc-link poe solution for cctv surveillance project
TRANSCRIPT
-Share WiFi everywhere-Enjoy WiFi everywhere
What can NC-LINK do for you?
Why Need PoE Solution In CCTV Project?
• Hardware
• Digital recording
• Coaxial
• Local Control
• Single User
• Low Installation & Maintenance Cost
Digital CCTV System
• Hardware and Software
• Use Existing TCP/IP Network
• Local Control & Remote Management
• Multi-User
• Low Installation & Maintenance Cost
• Scalable and easy for integration
Network CCTV System
Past, P
rese
nt &
Futu
re C
CTV
Marke
t
Analog CCTV System
• Hardware
• Analog recording
• Close Circuit
• Coaxial
• Local Control
• Single User
• High Installation & Maintenance Cost
Why Need PoE Solution In CCTV Project?
The main advantage of PoE for the CCTV project is the installation of remote or outside equipment without having to connect to AC power.
What are PoE Solution Contain？
PSE- PoE Switch, PoE Injector
PD- PoE Splitter
PoE system contain PSE(power sourcing equipment) part and PD(powered device) part.
What is the primary problems we are meeting now?
Protocol 802.3af（PoE） 802.3at（PoE plus）
Classification 0～3 0～4
Electric current(MAX) 350mA 600mA
PSE output voltage 44～57V DC 44～57V DC
PSE output power <=15.4W <=30W
PD input voltage 36～57V DC 42.5～57V DC
PD maximum power 12.95W 25.5W
Cabling requirements CAT-5 CAT-5e or better
ApplicationVOIP, WirelessAP,IP camera, RFID
IP camera with PTZ, Highpower Outdoor AP
Two kind of connection method: Midpan Connection and Endpoint
Midpan mainly used for mature data communication project, for no changed original equipment and wiring material.
Endpoint mainly used for CCTV project and Wireless-LAN project for Easy Installation and reduce the wiring work(especially strong electricity wire).
Designed Suit For Different Kind of NVR
Point1: Unique port design for connecting NVR
Designed Suit For Different Kind of NVR
NC-PUS051D-5 FE Port with 4 PoEPort-Power Supply: 72W-Steel Desktop Design
803.3af
NC-PUS091D-9 FE Port with 8 PoEPort-Power Supply: 144W-Steel Desktop Design
803.3af
NC-PUS018G-16 FE Port+2GE CO with 16 PoE Port-Power Supply: 360W-Standard 19-inch rack-mountable steel case
803.3af
NC-PUS026G-24 FE Port+2GE CO with 24 PoE Port-Power Supply: 400W-Standard 19-inch rack-mountable steel case
803.3af
Designed Suit For Different Kind of PoE/non-POE IP camera
Point2: Solution for non-PoE IP cameras : Installation Ease PoEsplitter support non-PoE IP camera(select 5V/9V/12V powering)
Designed Suit For Different Kind of PoE/non-POE IP camera
NC-POE11-Complies with IEEE802.3af.-Maximum power output up to 12W.-Selectable power output(12V/9V/5V)
NC-POE13-Support wide input voltage range 24Vdc to 36Vdc.-Power Supply: 12-24W-Output 12v 1-2A for IP camera
NC-POE14-Complies with IEEE802.3af.-Maximum power output up to 12W.-Power output 12V 1A for IP camera
NC-POE15-Complies with IEEE802.3af/at.-Maximum power output up to 24W.-Power output 5VDC/4A, or 9VDC/2.5A or 12VDC/2A.
803.3af/at
For non-PoE
803.3af
803.3af
Help you extend your PoE Rang from 100m to 400m
Point3: Our PoE Extender will help you extend your PoErange from 100 meter to 400 meter, suit for your different CCTV project requirements.
VLAN Port Protect your network security
Point4: Solid DIB Switch devide port VLAN easily，help restraint broadcast storm and defense DHCP spoofing, especially there exist some different networking equipment in your intranet, easy prevent broadcasting storm, internetworking of different networks and security control.
Different colour circle stand for different VLANs
belonged port.
NC-LINK Costdown Passive PoE Solution for CCTV Project
Point5: Most IP cameras spec 802.3af – we power these with our 48v solution;But, We also have solutions for 12v-48v non-PoE cameras and W ireless Aps ,Budget 6 watts per camera, 8 watts or more if they have PTZ or IR features. This PoE Switch used to provide PoE power to:* NC-LINK, Cisco, Mikrotik and Ubiquiti Access points, cameras and Routers * 12-24v WiFi Access points* 12-24v industrial equipment
Try a Costdown Passive PoE solution
NC-PUS051DN-5 FE Port with 4 Passive PoEPortMAX Power Supply: 95W-PoE Pin:4/5 (+), 7/8 (-)-Power out 12-48V
4PoE Ports, 95 Watts
NC-PUS081DN-8 FE Port with 7 PoE Port-MAX Power Supply: 120W-PoE Pin:4/5 (+), 7/8 (-)-Power out 12-48V
7PoE Ports, 120 Watts
NC-PUS091DN-9 FE with 8 PoE Port-MAX Power Supply: 140W-PoE Pin:4/5 (+), 7/8 (-)-Power out 12-48V
8PoE Ports, 140 Watts
NC-PUS016DN-16 FE with 14 PoE Port-MAX Power Supply: 300W-PoE Pin:4/5 (+), 7/8 (-)-Power out 12-24V
14PoE Ports, 300 Watts
Ideal for NC-LINK, Cisco, Mikrotik and Ubiquiti Access points, cameras and Routers
Update our Costdown PoE Solution from your Non-PoE IP camera?
Point6: If your IP camera do not support PoE and it is a 12v powered unit. Please use 24V Passive PoE Switch match our 12v PoE splitter(NC-POE13) to power your non-PoE IP camera for a cost-effective PoE solution.
No matter how many volts of PoE switch you select, NC-
POE13’s stable 12V power input let your IP camera work well.
Show US
Show USNC-LINK has partnered with global WiFi solutions provider, Purple WiFi Networks. This arrangement will see our SMB Wireless AP products integrated into Purple WiFi’s cloud-managed WiFi platform, meaning NC-LINK customers can now benefit from the analytical data driven from social networking information provided by guests as they log in. This is particularly attractive to customers in the retail sector but is equally useful for the leisure and hospitality markets.More information, Please check the link: http://www.purplewifi.net/partners/manufacturers
Strategic partnership with key Chipset Suppliers
Self-introduction
• Founded: November, 2007
• Headquarters: Shenzhen, China
• Reach: 30 countries and growing
• Number of employees: 200
• Cooperation Mode: OEM/ODM
• Products:– Wireless(AP, AP Router, Adapter, High Power and Outdoor)– Switch(Unmanaged, WEB-Smart and Managed 2 Layer)– DSL– Broadband– PoE, 4G, Powerline– Hotspot Products
http://www.nc-link.cn