nbu 7.5 dumps(unix) v5.0.pdf

8/16/2019 NBU 7.5 Dumps(Unix) v5.0.pdf

1/92

Symantec 250-271

Administration Symantec NetBackup 7.5 for UnixVersion: 5.0


2/92

Topic 1, Volume A

QUESTION NO: 1

Which component of Microsoft Outlook Personal Folder (.pst) files does Network Discover apply

filters to?

A. Individual emails in the .pst file

B. The entire .pst file

C. Attachments in the .pst file

D. Folders in the .pst file

Answer: B

Explanation:

QUESTION NO: 2

Where can an incident responder find the exact location of the file copy created by the Protect:

Copy File response action?

A. In the Incident Snapshot

B. In the Marker File

C. In the System Event

D. In the Discover Target configuration

Answer: A

Explanation:

QUESTION NO: 3

Which Symantec NetBackup 7.5 option provides integrated, end-to-end protection of NAS storage

devices using snapshots?

A. Symantec NetBackup Accelerator

B. Symantec NetBackup Replication Director

C. Symantec NetBackup Shared Storage Option

D. Symantec NetBackup Snapshot Manager

Answer: B

Explanation:

Symantec 250-271 Exam

"Pass Any Exam. Any Time." - www.actualtests.com 2


3/92

QUESTION NO: 4

What is a benefit of the Symantec Data Loss Prevention 9.0 security architecture?

A. Communication is initiated by the detection servers inside the firewall.

B. Mutual authentication between servers is based on the Challenge Handshake Authentication

Protocol (CHAP).

C. Endpoint Agent to Endpoint Server communication uses the Triple Data Encryption Standard

(3DES).

D. Encryption is provided for confidential information across system components.

Answer: D

Explanation:

QUESTION NO: 5

Which two factors must be considered when estimating the space required for the image catalog?

(Select two.)

A. Number of policies

B. Number of files protected

C. Average file size

D. Retention period

E. File system size

Answer: B,D

Explanation:

QUESTION NO: 6

Refer to the exhibit.




4/92

An administrator needs to perform Auto Image Replication. The administrator has configured the

environment as displayed below.

Which component is missing from the configuration to complete Auto Image Replication?

A. Site 1 media server

B. Site 2 master server

C. Site 1 import template

D. Site 2 duplicate template

Answer: B

Explanation:

QUESTION NO: 7

Which Symantec NetBackup 7.5 feature allows tape devices that support hardware encryption?

A. Media Server Encryption Option

B. Client Encryption Option

C. Key Management Service

D. Access Control Option

Answer: C

Explanation:

QUESTION NO: 8

Which type of installation requires the most additional memory on the Enforce Server machine tohost multiple server instances?




5/92

A. Three-tier

B. Two-tier

C. Single-tier

D. Stand-alone

Answer: C

Explanation:

QUESTION NO: 9

What is an accurate description of a Symantec NetBackup 7.5 domain?

A. All media servers and clients owned by multiple master servers

B. All clients owned by multiple master servers

C. All media servers and clients owned by one master server

D. All master and media servers on the same subnet

Answer: B

Explanation:

QUESTION NO: 10

Which term refers to a set of tape volumes that contain related data?

A. volume pool

B. volume set

C. storage group

D. media set

Answer: A

Explanation:

QUESTION NO: 11

What is required to install a Symantec NetBackup 7.5 media server?

A. Amaster server that is already installed

B. Aprevious version of Symantec NetBackup already running on the server




6/92

C. Astorage device visible to the operating system

D. Avalid Symantec NetBackup license key

Answer: D

Explanation:

QUESTION NO: 12

Which script moves client software to a remote UNIX client from a UNIX master server?

A. ftp_to_client

B. install_client_files

C. client_config

D. send_client_files

E. update_client

Answer: B

Explanation:

QUESTION NO: 13

Which roles configuration tab is used to set the custom attributes that a certain role can view or

edit?

A. General tab

B. Incident Access tab

C. Policy Management tab

D. Users tab

Answer: A

Explanation:

QUESTION NO: 14

Where can an administrator view the number of messages per protocol that have been monitored

over a given time period?

A. Traffic Detail page




7/92

B. Network Incident Report page

C. Server Detail page

D. System Events page

Answer: A

Explanation:

QUESTION NO: 15

An organization is installing a Symantec NetBackup 7.5 master server and the license key is

unavailable during the installation process.

What will be the result of the installation?

A. All features will be enabled for a 30-day evaluation period.

B. Only core functionality will be enabled.

C. Installation of the master server will fail.

D. Symantec NetBackup services will fail to start on the master server until a license key is

installed.

Answer: C

Explanation:

QUESTION NO: 16

Which step is mandatory during a Symantec NetBackup Media Server installation?

A. Attaching the storage devices

B. Defining the location of the LiveUpdate serverC. Entering the name of the master server

D. Rebooting the server after installation is complete

Answer: C

Explanation:

QUESTION NO: 17

Which data locations should an organization scan first?




8/92

A. Private individual directories

B. Centralized repositories

C. Password protected shares

D. Regionalized repositories

Answer: B

Explanation:

QUESTION NO: 18

On which protocols does Symantec Data Loss Prevention 9.0 use port-based protocol

recognition?

A. Secure tunneling protocols

B. Pre-defined UDP protocols

C. User-configured TCP protocols

D. System-defined UDP and TCP protocols

Answer: C

Explanation:

QUESTION NO: 19

A Symantec NetBackup administrator configures a policy to perform file system backups of

multiple client systems using the Allow multiple data streams feature. All other policy attributes are

at default settings.

Which master server parameter must be configured to enable the backup jobs from a client to run

concurrently?

A. Target storage unit: Maximum concurrent jobs

B. Global Attributes: Maximum jobs per client

C. Global Attributes: Maximum backup copies

D. Target storage unit: Enable multiplexing

Answer: B

Explanation:




9/92

QUESTION NO: 20

Four jobs enter the Symantec NetBackup 7.5 job queue simultaneously. All jobs require the same

resources and there are resources available to run only one job at a time. All master server Host

Properties are set to default values, as are the attributes of the policies associated with the jobs.

Of the four jobs, which job will run last?

A. Backup job

B. Restore job

C. Import job

D. Duplication job

Answer: A

Explanation:

QUESTION NO: 21

Which delimiter is unacceptable in Exact Data Matching (EDM) data sources?

A. comma (,)

B. tabC. pipe (|)

D. slash (/)

Answer: D

Explanation:

QUESTION NO: 22

Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The

Symantec NetBackup administrator is required to retain clientA's full backups for a period of four

months. When the administrator modifies the Full schedule, four months is missing from the

selection list.

In Host Properties, where should the administrator add the four month retention period?

A. Master Servers > master1 > Retention Periods

B. Clients > clientA > Global Attributes

C. Media Servers > media1 > Retention Periods




10/92

D. Master Servers > master1 > Global Attributes

Answer: A

Explanation:

QUESTION NO: 23

Which default Windows Open File Backup method is used during a backup for a newly installed

Symantec NetBackup 7.5 Windows 2003 client?

A. VERITAS Snapshot Provider (VSP)

B. Microsoft Volume Shadow Copy Service (VSS)

C. snapshot provider configured in Global Client Attribute

D. Advanced Open File Option (AOFO)

Answer: C

Explanation:

QUESTION NO: 24

A Symantec NetBackup administrator needs to prevent the Symantec NetBackup Administration

Console on a media server system, named media1.domain, from accessing and administering

Symantec NetBackup on a master server system, named master1.domain.

Which configuration step prevents Symantec NetBackup Administration Console access from

media1.domain access to master1.domain?

A. Verify that an entry for media1.domain is included in the Media Servers list in the Master Server

Host Properties for master1.domainB. Verify that an entry for media1.domain is included in the Media Servers list in the Master Server

Host Properties for media1.domain

C. Remove media1.domain from the Additional Servers list in the Master Server Host Properties

for master1.domain

D. Remove media1.domain from the Additional Servers list in the Media Server Host Properties for

media1.domain

Answer: C

Explanation:




11/92

QUESTION NO: 25

Which three functions of the communications architecture ensure that the system is able to

automatically recover should a network connectivity failure occur between the detection servers

and the Enforce Server? (Select three.)

A. Database backupB. Autonomous monitoring

C. Automatic synchronizing

D. Incident queuing

E. Alert archiving

Answer: B,C,D

Explanation:

QUESTION NO: 26

An employee recieved the following email notification:

****************************************************************************************************************

********

Dear Bob,

Your email to [email protected] with subject Account Info you requested violates the

company's Customer Data Protection policy.

If this is a legitimate business email, please add the word Encrypt in the subject line of the email.

The communication will then be automatically sent to the recipient in an encrypted form, in

accordance with company policy.

Please note that this violation has also been reported to your manager. Confidential data

protection is every employee's responsibility.

Thank you,

Corporate Information Security Team

****************************************************************************************************************

********




12/92

Which recommended item is missing from this email notification?

A. Acontact person

B. The severity of the violation

C. The affected business unit

D. The name of the file that caused the violation

Answer: A

Explanation:

QUESTION NO: 27

Which Symantec NetBackup 7.5 command can be used to move a tape volume to a different

volume pool?

A. vmupdate

B. vmmove

C. vmmedia

D. vmchange

Answer: D

Explanation:

QUESTION NO: 28

Which two conditions must be met to change the volume group of a tape volume? (Select two.)

A. All tape volumes in a volume group must be in the same library or standalone.

B. All tape volumes must have barcode labels.C. No backup images can be written to the tape volume.

D. All tape volumes must be vaulted before the volume group can be changed.

E. All tape volumes in the same volume group must have the same media type.

Answer: A,E

Explanation:

QUESTION NO: 29




13/92

Which two are used to change the status of a disk pool? (Select two.)

A. nbdevquery

B. Device Monitor

C. Devices > Disk Pools

D. nbdevstatus

E. nbdevconfig

Answer: B,E

Explanation:

QUESTION NO: 30

The Symantec NetBackup administrator is concerned that the media server deduplication pool is

using more space than estimated.

In which two places can the administrator find the amount of space used in the media server

deduplication pool? (Select two.)

A. Reports > Disk Storage Status

B. Device Monitor > Disk Pools

C. Reports > Disk LogsD. Devices > Disk Pools

E. Reports > Disk Pool Status

Answer: D,E

Explanation:

QUESTION NO: 31

Which two response rule actions should be avoided in Exact Data Matching (EDM) policies?

(Select two.)

A. Endpoint: Notify

B. Protect: Copy File

C. Network: Block HTTP/HTTPS

D. Protect: Quarantine File

E. Endpoint: Block

F. Network: Remove HTTP/HTTPS Content




14/92

Answer: A,E

Explanation:

QUESTION NO: 32

Which two methods are used to set up disk spanning to allow backups to span multiple BasicDisk

storage units? (Select two.)

A. Select Host Properties > Media Servers > Media > Allow backups to span disks

B. Select Storage Units > Storage Unit > Allow backup to span disks

C. Configure a storage unit group and add all disk storage units regardless of media server

D. Configure a storage unit group that consists only of disk storage units defined on a single media

server

E. Confirm that a load balancing storage unit is selected at the group level

Answer: A,D

Explanation:

QUESTION NO: 33

Where should the Symantec NetBackup administrator look in the Symantec NetBackup

Administration Console to determine whether an AdvancedDisk Storage server is already

configured?

A. Media and Device Management > Devices > Storage Servers

B. Media and Device Management > Hosts > Storage Servers

C. Media and Device Management > Credentials > Storage Servers

D. Media and Device Management > Device Monitor > Storage Servers

Answer: C

Explanation:

QUESTION NO: 34

A Symantec NetBackup administrator has three media servers (named prod-media, dev-media,

and test-media) that are available for client backups. The administrator would like the jobs to runto the prod-media server first, unless it is down only.




15/92

How should the administrator configure the storage?

A. Configure three storage units and then select any available in the policy

B. Configure a storage unit group and set the storage unit selection to prioritized

C. Configure a storage lifecycle policy and set the selection to first available

D. Configure the storage unit group and set the storage unit selection to failover

Answer: D

Explanation:

QUESTION NO: 35

A Symantec NetBackup 7.5 policy has Accelerator enabled.

Which type of storage is supported for this policy?

A. Cloud storage

B. Basic disk

C. Tape drive

D. Advanced disk

Answer: AExplanation:

QUESTION NO: 36

Which command is used to configure tape drives and robotic devices in Symantec NetBackup

7.5?

A. tpautoconfig

B. tpconfig

C. tapeconfig

D. tldconfig

Answer: D

Explanation:




16/92

QUESTION NO: 37

Which two are valid storage unit types in Symantec NetBackup 7.5? (Select two.)

A. deduplication

B. NDMP

C. RobotD. Media manager

E. Basic

Answer: B,D

Explanation:

QUESTION NO: 38

A Symantec NetBackup 7.5 master server has a Microsoft Windows policy that protects over 500

servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is between

3:00 PM and 5:00 PM and is unshared with any other policy. When the backup window for this

policy is open, the overall performance of the disk storage unit gets degraded.

Which setting should the administrator modify to reduce the number of concurrent streams writing

to the disk storage unit to 10 during the backup window?

A. Disable multiplexing on the policy schedules

B. Set the "Maximum backup copies" host property to 10

C. Enable multiplexing for the storage unit and set the value to 10

D. Enable the "Limit Jobs per policy" attribute

Answer: D

Explanation:

QUESTION NO: 39

A VMware policy has been configured to backup a Linux virtual machine.

What must be done to guarantee all data is flushed from memory to disk?

A. VSS must be configured in the VM.

B. The VM must be running the VxFS file system.

C. The SYMCquiesce utility must be installed in the VM.




17/92

D. Exclude swap and paging files must be unchecked.

Answer: C

Explanation:

QUESTION NO: 40

Which two statements accurately describe a user archive operation in Symantec NetBackup 7.5?

(Select two.)

A. Restores are performed using bpcatlist and bpcatres.

B. The archived image reduces the size of the Symantec NetBackup 7.5 catalog image database.

C. The policy must be named user-archive.

D. An administrator is unable to manually initiate the job from the Symantec NetBackup

Administration Console.

E. The policy backup selection list is ignored.

Answer: D,E

Explanation:

QUESTION NO: 41

An administrator configures STU-A with the "On Demand Only" option.

When will backups write to this storage unit?

A. When the Any Available storage unit is selected in the policy

B. When all other storage units are unavailable

C. When the policy specifies STU-A as an attributeD. When the storage unit specified in the policy is full or unavailable

Answer: B

Explanation:

QUESTION NO: 42

How can an administrator back up application data that resides on a hardware disk array without

affecting CPU or disk resources?




18/92

A. enable the "Perform snapshot backup" policy attribute, choose the vxvm Snapshot method, and

select the "Perform off-host backup" attribute

B. enable the "Perform snapshot backup" policy attribute, choose the auto Snapshot method, and

select the "Perform off-host backup" attribute

C. enable the Master Server Property - Client Attribute "Enable Windows Open File Backups" to

use Microsoft Volume Shadow Copy Service (VSS)

D. enable the Master Server Property - Client Attribute "Enable Windows Open File Backups" touse Veritas Snapshot Provider (VSP) with a Global Drive Snapshot

Answer: B

Explanation:

QUESTION NO: 43

Which three products support virtualization and can be run on virtual machines? (Select three.)

A. Endpoint Discover

B. Network Discover

C. Network Prevent (Web)

D. Network Monitor

E. Network Prevent (Email)

Answer: B,C,EExplanation:

QUESTION NO: 44

What are three valid reasons for adding comments to incidents? (Select three.)

A. To provide detail to the next responder when escalating an incident

B. To allow the next responder to more quickly prioritize incidents for review

C. To allow the next responder to more quickly understand the incident history

D. To provide detail when closing an incident

E. To provide detail for report filtering

Answer: A,C,D

Explanation:




19/92

QUESTION NO: 45

What is a likely outcome of filtering network traffic in Network Monitor?

A. Monitoring of outbound traffic before inbound traffic

B. Monitoring of traffic important to the customer

C. Decrease in the detection accuracyD. Increase in Network Monitor demand for RAM

Answer: B

Explanation:

QUESTION NO: 46

Which two products are required for quarantining confidential files residing inappropriately on a

public file share? (Select two.)

A. Network Discover

B. Endpoint Discover

C. Network Monitor

D. Network Prevent

E. Network Protect

Answer: A,E

Explanation:

QUESTION NO: 47

A customer needs to restore individual objects and attributes in Active Directory.

Which two tasks must be performed to achieve this? (Select two.)

A. Install the Network File System (NFS) on the client

B. Choose Active Directory policy type

C. Choose the "Enable granular recovery" option in the policy

D. Install the NetBackup File System (NBFS) on the client

E. Choose the "Use accelerator" option in the policy

Answer: A,C

Explanation:




20/92

QUESTION NO: 48

Which information is recommended to be included in an Exact Data Matching (EDM) data source?

A. Date fields

B. Numeric fields with fewer than five digits

C. Column names in the first row

D. Country, state, or province names

Answer: C

Explanation:

QUESTION NO: 49

Which type of rule do incident responders use to remediate an incident?

A. Policy response rule

B. Incident response rule

C. Automated response ruleD. Smart Response rule

Answer: D

Explanation:

QUESTION NO: 50

In which two cases will the agent status remain green (good) on the Agent Events page? (Select

two.)

A. The agent closed the connection to the Endpoint Server.

B. The Endpoint Server detected that the connection with the agent was lost.

C. There was agent or server authentication failure.

D. The agent is unable to restore a database file.

E. There was an agent service shutdown during machine shutdown.

Answer: A,E

Explanation:




21/92

QUESTION NO: 51

An administrator needs to protect multiple clients that contain multiple data volumes to removable

media.

Which policy setting in Symantec NetBackup 7.5 will perform the backup the fastest?

A. Accelerator

B. Multiplexing

C. Disable client deduplication

D. Enable client compression

Answer: B

Explanation:

QUESTION NO: 52

Why should Network Monitor be configured to filter out low-threat traffic?

A. Because the product is unable to filter out high-threat traffic

B. To ensure that CPU cycles are spent processing high-threat traffic

C. Because no other traffic will be monitored until this is accomplished

D. To verify that the filtering process is actually working

Answer: B

Explanation:

QUESTION NO: 53

What is the default incident data retention behavior for Network Monitor and Network Prevent?

A. Only messages are retained.

B. Only attachments are retained.

C. Neither messages nor attachments are retained.D. Messages and attachments are retained.

Answer: D




22/92

Explanation:

QUESTION NO: 54

In addition to the full backup schedule type, which other schedule can be configured as a synthetic

backup?

A. Differential incremental backup

B. Cumulative incremental backup

C. User backup

D. Application backup

E. Automatic backup

Answer: B

Explanation:

QUESTION NO: 55

Which three are valid Scanned Content filter types for the Discover File System target? (Select

three.)

A. Exclude filter

B. File Size filter

C. Read ACL filter

D. File Owner filter

E. File Date filter

Answer: A,B,E

Explanation:

QUESTION NO: 56

What are three benefits that data loss prevention solutions provide that other security technologies

or tools do not? (Select three.)

A. Give visibility into where sensitive data is stored

B. Give insight into capacity planning for sensitive data

C. Identify who has access to sensitive data




23/92

D. Indicate where sensitive data is being sent

E. Measure encryption strength for sensitive data

Answer: A,C,D

Explanation:

QUESTION NO: 57

Which three does the Environment Check Utility (ECU) provide? (Select three.)

A. Software build numbers

B. System events records

C. Days remaining on the current license

D. Operating system version of servers

E. Installation configuration settings

Answer: A,D,E

Explanation:

QUESTION NO: 58

To which file system folder does PacketCapture write reconstructed SMTP messages?

A. drop

B. drop_pcap

C. drop_discover

D. drop_ttd

Answer: B

Explanation:

QUESTION NO: 59

Which statement applies to a Symantec NetBackup 7.5 calendar based schedule in a policy of

type Standard?

A. The backup may run on a day with a closed backup window with Retries allowed after runday.

B. An Exclude date may be configured to occur on an included recurring day of the week.




24/92

C. Configuring a start window spanning midnight is invalid.

D. A calendar based schedule is incompatible with a frequency based schedule.

Answer: B

Explanation:

QUESTION NO: 60

Which types of information are backed up by a cumulative incremental backup schedule?

A. Files and folders that have changed since the last differential incremental, cumulative

incremental, or full backup

B. Files and folders that have changed since the last cumulative incremental or full backup

C. Files and folders that have changed since the last full backup

D. Files that have changed since the last incremental or full backup

Answer: C

Explanation:

QUESTION NO: 61

Which Network Discover option is used to determine whether confidential data exists without

having to scan the entire target?

A. Exclude Filtering

B. File Throttling

C. Byte Throttling

D. Inventory Mode Scanning

Answer: D

Explanation:

QUESTION NO: 62

An organization needs to automatically back up a server's data every other Sunday with a backup

start window from 7:00 PM to 10:00 PM. It is expected that manual backups will never be run.

How can this backup schedule be configured to ensure it runs every other Sunday at 7:00 PM?




25/92

A. Scheduletype:Calendar

CalendarSchedule:Recurring Week Days: 1st and 3rd Sunday

B. Scheduletype:Calendar

CalendarSchedule:Recurring Week Days: 2nd and 4th Sunday

C. Scheduletype:Frequency, once per 2 weeks

D. Scheduletype:Frequency, once per 13 days

Answer: D

Explanation:

QUESTION NO: 63

A UNIX client has the mount points listed below.

/var

/usr

/opt

/home

A backup policy for this client has "Allow multiple data streams" enabled and contains a backupselections list with the ALL_LOCAL_DRIVES directive. It also contains an exclude list that

excludes /home.

What happens when this backup policy runs?

A. All backup jobs complete successfully.

B. Backup jobs are created for all mount points except for /home.

C. The backup job for /home is partially successful because /home is excluded.

D. The backup job for /home fails because /home is excluded.

Answer: D

Explanation:

QUESTION NO: 64

An administrator needs to configure a backup policy to run only on the 1st and 15th day of each

month. The Calendar Schedule tab is absent from the schedule window.




26/92

How does the administrator get the Calendar Schedule tab to display, so that the schedule can be

configured for specific days?

A. Enable specific days using the bpplsched command line

B. Enable specific days using the master server's host properties

C. Configure a start window within the schedule

D. Change the schedule type from Frequency to Calendar

Answer: B

Explanation:

QUESTION NO: 65

Which report helps a compliance officer understand how the company is complying with its data

security policies over time?

A. Policy Trend report, summarized by policy, then quarter

B. Policy Trend report, summarized by policy, then severity

C. Policy report, filtered on quarter, and summarized by policy

D. Policy report, filtered on date, and summarized by policy

Answer: A

Explanation:

QUESTION NO: 66

Which statement describes a DLP Agent encryption feature?

A. The key size is standard and unconfigurable.B. The key is randomly generated for the agent store.

C. The system administrator can generate a unique authentication key.

D. DLP Agent-to-server communication uses Secure Socket Layer (SSL).

Answer: C

Explanation:

QUESTION NO: 67




27/92

A system administrator examines the results of a completed scan.

Which information is available on a scan listing on the Discover Targets page? (Select three.)

A. User who initiated the scan

B. Elapsed time and total time for each scanC. Number of items scanned

D. Number of items changed since the previous scan

E. File structure and location

F. Errors encountered

Answer: B,C,F

Explanation:

QUESTION NO: 68

Where are backup selections configured?

A. on a configuration file on the client

B. in the policy on the master server

C. in the client's host properties

D. in the relational database on the master server

Answer: B

Explanation:

QUESTION NO: 69

Under which high-level node in the left navigation panel can administrators find the DiscoverTargets page?

A. Policy

B. Reports

C. Administration

D. Data at Rest

Answer: A

Explanation:




28/92

QUESTION NO: 70

A Windows policy is created with Allow Multiple Data Streams enabled. The hosts s1 and s2 are

added as the client list and the backup selections listed below are specified.

NEW_STREAM

C:\

NEW_STREAM

D:\

NEW_STREAM

E:\

NEW_STREAM

F:\

The drives listed below are present on the hosts.

s1 has C:\ D:\ and E:\

s2 has C:\ D:\ and F:\

How many data streams will be created when the backup runs for both clients?

A. Two

B. Three

C. Six

D. Eight

Answer: D

Explanation:

QUESTION NO: 71

Which TrueMatch detection method can be evaluated at the agent level?

A. Exact Data Matching (EDM)B. Indexed Document Matching (IDM)

C. Described Content Matching (DCM)




29/92

D. Directory Group Matching (DGM)

Answer: C

Explanation:

QUESTION NO: 72

A backup is configured with a 10 minute checkpoint interval. The third checkpoint interval expires

in the middle of transferring the file images.zip. The backup fails 7 minutes later, after transferring

images.zip and three additional files.

Where does the backup resume?

A. At the point of failure in images.zip

B. At the beginning of images.zip

C. At the end of images.zip

D. At the previous checkpoint

Answer: C

Explanation:

QUESTION NO: 73

Auto Image Replication is being used to replicate New York backups to London. The New York

backups have completed.

What is the next step?

A. Image duplicated to London using a storage lifecycle policy to a Disk Staging Storage Unit

B. Image duplicated to London using a Disk Staging Storage Unit

C. Image duplicated to London using a storage lifecycle policy to a media server deduplication

pool

D. Image duplicated to London using Symantec NetBackup Vault to tape

Answer: C

Explanation:




30/92

QUESTION NO: 74

All users, regardless of their role permissions, are allowed to configure which two reporting

options? (Select two.)

A. Ability to delete incidents

B. Ability to set the default reportC. Ability to look up custom attributes

D. Ability to print reports to PDF

E. Ability to select reports to display

Answer: B,E

Explanation:

QUESTION NO: 75

An administrator is using storage lifecycle policies to create multiple backup copies.

What is the result if one of the copies fails?

A. The copy fails and the cascaded jobs continue

B. The copy retries once and then failsC. All copies fail

D. The copy will retry

Answer: D

Explanation:

QUESTION NO: 76

Which three protocols are system-configured and are recognized by Network Monitor by their

individual signatures? (Select three.)

A. FTP

B. IM: ICQ

C. IM: AIM

D. NNTP

E. TFTP

Answer: A,C,D




31/92

Explanation:

QUESTION NO: 77

Which two operations are valid first steps in a storage lifecycle policy in Symantec NetBackup 7.5?

(Select two.)

A. backup

B. backup from snapshot

C. duplication

D. replication

E. import

Answer: A,E

Explanation:

QUESTION NO: 78

What is required to implement Auto Image Replication?

A. BasicDisk or AdvancedDisk storage units and at least one master server

B. OST-compliant appliances or MSDP and at least one master server

C. OST-compliant appliances or MSDP and at least two master servers

D. BasicDisk or AdvancedDisk storage units and at least two master servers

Answer: C

Explanation:

QUESTION NO: 79

What is required to use Symantec NetBackup Auto Image Replication?

A. Symantec NetBackup RealTime must be installed and configured on a separate server.

B. The SLP in domain1 must have the same name as the Import SLP in domain2.

C. "Any Available" Storage Unit must be selected.

D. Only one replication operation can be configured within the SLP.

Answer: B




32/92

Explanation:

QUESTION NO: 80

Which Network Protect feature is a system administrator unable to configure?

A. Ability to copy files

B. Ability to restore files

C. Location of quarantined files

D. Content of the file marker

Answer: B

Explanation:

QUESTION NO: 81


The administrators in an organization consider a specific set of backup data as the most criticalbackup. They use storage lifecycle policies and default data classifications to differentiate data

types. All backups are performed to the same disk pool and are relocated to tapes.

Which backup images are deleted first when the disk becomes full?

A. Application Data images

B. UNIX Client images

C. Windows Client imagesD. Oracle Data images




33/92

Answer: C

Explanation:

QUESTION NO: 82

The configuration parameters MIN_GB_SIZE_PER_DUPLICATION_JOB and

IMAGE_EXTENDED_RETRY_PERIOD_IN_HOURS are part of the configuration for which

feature?

A. Catalog Replication

B. Disk Staging

C. Storage Lifecycle Policy

D. NetBackup Vault

Answer: C

Explanation:

QUESTION NO: 83

What is a benefit of Symantec NetBackup Accelerator?

A. Faster full backups by eliminating the need to read the entire file system

B. Faster processing of media server deduplication pool fingerprints

C. Faster processing by the Symantec NetBackup EMM database

D. Faster full backups by synthesizing existing full and incremental backups

Answer: A

Explanation:

QUESTION NO: 84

Which setting causes poor deduplication rates?

A. Maximum fragment size

B. Deduplication compression

C. Deduplication encryption

D. Policy-based compression




34/92

Answer: D

Explanation:

QUESTION NO: 85

Which setting would restrict deduplication backups within Symantec NetBackup 7.5?

A. Media multiplexing

B. Maximum concurrent jobs

C. Maximum fragment size

D. Job priority

Answer: B

Explanation:

QUESTION NO: 86

Where is network resiliency configured in Symantec NetBackup 7.5?

A. Host Properties > master1 > Resilient NetworkB. Host Properties > media1 > Resilient Network

C. Host Properties > client1 > Network Settings

D. Host Properties > master1 > Client Attributes

Answer: A

Explanation:

QUESTION NO: 87

A Symantec NetBackup 7.5 administrator needs to use client-side deduplication to reduce network

traffic.

What is the minimum version level requirement for clients that deduplicate their own data?

A. 7.0B. 7.1

C. 7.1.0.3




35/92

D. 7.5

Answer: D

Explanation:

QUESTION NO: 88

An organization plans to upgrade its master server to Symantec NetBackup 7.5. A Symantec

NetBackup media server is being used to perform a backup of the catalog.

Which Symantec NetBackup version or versions are supported on the media server performing

the catalog backup?

A. 6.5, 7.0, or 7.1

B. 7.5 only

C. 7.1 or 7.5 only

D. 7.0, 7.1, or 7.5

Answer: B

Explanation:

QUESTION NO: 89

Which two tasks does the catalog backup perform? (Select two.)

A. Ensures the catalog backup is created in a safe location

B. Automatically assigns tapes to the CatalogBackup pool

C. Appends to existing data on tape

D. Backs up the catalog only when there are no client backups in progressE. Copies the NBDB to a staging area before backing it up

Answer: C,E

Explanation:

QUESTION NO: 90

When the image database needs to be moved, after determining that all jobs have completed,

which two services (daemons) should be stopped? (Select two.)




36/92

A. Database Manager (bpdbm)

B. Enterprise Media Manager (nbemm)

C. Policy Execution Manager (nbpem)

D. Request Daemon (bprd)

E. Service Layer (nbsl)

Answer: A,DExplanation:

QUESTION NO: 91

In which order should an administrator install a new Symantec NetBackup 7.5 patch?

A. Master, Media 1, Media 2, Client, OpsCenter

B. Master, Media 1, Client, Media 2, OpsCenter

C. OpsCenter, Master, Media 2, Media 1, Client

D. Master, OpsCenter, Media 1, Media 2, Client

Answer: C

Explanation:

QUESTION NO: 92

What is an advantage of using Endpoint Discover over Network Discover?

A. Ability to pause an in-progress scan

B. Ability to schedule the scans

C. Ability to scan online machines

D. Ability to scan many machines in parallel

Answer: D

Explanation:

QUESTION NO: 93

An administrator needs to install a Symantec NetBackup patch to a 32-bit Windows 2003 server.

Which machine should the administrator use to deploy the patch remotely?




37/92

A. Windows 7 64-bit workstation

B. Windows XP 32-bit workstation

C. Linux 32-bit media server

D. Windows 2003 64-bit client server

Answer: B

Explanation:

QUESTION NO: 94


An administrator needs to create two additional copies of a backup image stored on a tape but the

Setup Duplication Variables window will only allow one additional copy to be configured.

What is a likely cause?

A. The Maximum Backup Copies in the Master Server Host Properties is set to 2.

B. The Media multiplexing in the schedule is set to 2.

C. The Maximum Concurrent Jobs property in the Storage Unit is set to 2.

D. The Limit Jobs per Policy property in the Backup policy is set to 2.

Answer: A

Explanation:

QUESTION NO: 95

Which Symantec NetBackup 7.5 feature may override the retention level of an image?




38/92

A. NetBackup Accelerator

B. NetBackup Cloud

C. NetBackup Search

D. Replication Director

Answer: C

Explanation:

QUESTION NO: 96

Which product can replace a confidential document residing on a public share with a Marker File

explaining why the document was removed?

A. Network Prevent

B. Network Protect

C. Network Monitor

D. Network Discover

Answer: B

Explanation:

QUESTION NO: 97

Which section in the Symantec NetBackup 7.5 administration console provides visibility into the

backup image database?

A. Media

B. Catalog

C. Activity MonitorD. Host Properties

Answer: D

Explanation:

QUESTION NO: 98

Which detection method includes keyword rules?




39/92

A. Exact Data Matching (EDM)

B. Directory Group Matching (DGM)


D. Indexed Document Matching (IDM)

Answer: C

Explanation:

QUESTION NO: 99

Where in the GUI are Smart Response rules executed? (Select two.)

A. Incident Summary reports

B. Incident List reports

C. Incident Snapshot reports

D. Dashboard reports

E. Response Rules page

Answer: B,C

Explanation:

QUESTION NO: 100

How does a system administrator verify that a Network Monitor Server is healthy?

A. By checking Incident Queue and Message Wait Time on the System Overview page

B. By verifying the configuration details of the System Settings page

C. By determining whether system alert message emails are generated or received

D. By reviewing the results of the Environmental Check Utility (ECU)

Answer: A

Explanation:

QUESTION NO: 101

A backup on tape is due to expire in one week. The administrator needs to keep the imageavailable for restore indefinitely.




40/92

Which two methods can be used to accomplish this goal? (Select two.)

A. Use the bpexpdate command to change the expiration date of the image

B. Use the bpretlevel command to customize the retention level

C. Use the bpimmedia command to freeze the tape

D. Use the bpduplicate command to create a copy with an infinite retention

E. Use the vmchange command to change the expiration date of the tape

Answer: A,D

Explanation:

QUESTION NO: 102

Which command can be used to determine the AdvancedDisk disk volume state?

A. vmpool

B. nbdevquery

C. nbdevconfig

D. vmoprcmd

Answer: B

Explanation:

QUESTION NO: 103

Which disk backup method should be used with the media server load balancing feature?

A. AdvancedDisk

B. BasicDiskC. Media Server Deduplication Pool (MSDP)

D. OpenStorage

E. PureDisk Deduplication Option (PDDO)

Answer: A

Explanation:

QUESTION NO: 104




41/92

Where can an incident responder find the policy rules and/or exceptions that were in effect when a

particular incident was detected?

A. Incident List

B. Policy page

C. Policy Summary report

D. Incident Snapshot

Answer: D

Explanation:

QUESTION NO: 105

Which daemon must be stopped and restarted on the media servers when changes have been

made to devices?

A. bprd

B. ltid

C. bpdbm

D. vmd

Answer: B

Explanation:

QUESTION NO: 106

A Symantec NetBackup administrator is preparing to update some tape devices and needs to

ensure that updated tape devices are visible during device discovery and configuration in

Symantec NetBackup 7.5.

What should the administrator review prior to updating the devices?

A. The support mappings utility

B. The volume mappings files

C. The device mappings files

D. The EMM database

Answer: C

Explanation:




42/92

QUESTION NO: 107

A backup has allocated a tape labeled SQL001 for a SQL backup job from the scratch pool and

has assigned this tape to the Symantec NetBackup volume pool. An administrator now needs to

move SQL001 to a previously created volume pool called SQLTapes.

How is this accomplished?

A. Right-click SQL001 and select Change

B. Expire SQL001, right-click SQL001, and select Change

C. Right-click SQL001 and select Move

D. Edit the barcode rules and inventory the library

Answer: B

Explanation:

QUESTION NO: 108

Which detection method is used for fingerprinting and protecting unstructured data, such as

source code documents or merger and acquisition documents?

A. Exact Data Matching (EDM)

B. Directory Group Matching (DGM)

C. Indexed Document Matching (IDM)

D. Described Content Matching (DCM)

Answer: C

Explanation:

QUESTION NO: 109

An administrator has a tape that has been previously used by Symantec NetBackup 7.5 for client

backups but no longer contains valid data. The barcode has been changed and the tape has been

moved to a different Symantec NetBackup domain.

Which action will allow this tape to be used in the new domain?




43/92

A. Move the tape to the scratch volume pool

B. Relabel the tape

C. Deassign the media

D. Inventory the robotic library

Answer: B

Explanation:

QUESTION NO: 110

A policy manager wants to apply policies only to certain employees with a specific classification

level.

Which TrueMatch detection method can help accomplish this?

A. Directory Group Matching (DGM)

B. Exact Data Matching (EDM)


D. Indexed Document Matching (IDM)

Answer: A

Explanation:

QUESTION NO: 111

A Symantec NetBackup administrator received previously used media. The administrator inserted

the media into the library, ran an inventory, updated the volume configuration, and initiated a

backup. The backup ran and froze every tape that had been recently added.

Which Symantec NetBackup configuration must be changed to prevent this scenario from

recurring?

A. Change the barcode tag

B. Manually create the media

C. Assign the media to a volume pool

D. Allow media overwrite

Answer: D

Explanation:




44/92

QUESTION NO: 112

An administrator needs a report that displays all images written to both disk and tape for a

particular client.

Which command should be run to display the report?

A. bplist -all

B. bpimmedia -U

C. bpimagelist -U

D. bpstulist -all

Answer: B

Explanation:

QUESTION NO: 113

A Symantec NetBackup administrator is trying to determine whether they have tapes that have

been encrypted.

Which report would provide this information?

A. Tape Written

B. Tape Lists

C. Tape Summary

D. Images on Tape

Answer: C

Explanation:

QUESTION NO: 114

What happens when an administrator cancels a child job created by a storage lifecycle policy?

A. All child jobs are cancelled, but the parent job continues to run.B. Only the single child job is cancelled.

C. All child jobs and the parent job are cancelled.




45/92

D. All child jobs continue to run.

Answer: C

Explanation:

QUESTION NO: 115

Under which set of circumstances would a lower priority job run before a higher priority job when

both start at the same time?

A. When the lower priority job has multiplexing enabled and can join an existing multiplex group

B. When the lower priority job requires media in a volume pool

C. When the higher priority job can use the media already loaded in the drive

D. When the higher priority job has multiple streams set to 4 and four tape drives are available

Answer: A

Explanation:

Topic 2, Volume B

QUESTION NO: 116

A Symantec NetBackup administrator has an environment that runs over one thousand jobs a

night. Some nights there are hundreds of jobs queued waiting for a resource.

Which action should the administrator take in the event that specific jobs need to run when a

resource next becomes available during that evening's backup session?

A. Pause all queued jobs except for the job that needs to runB. Change the job priority for the job in the policy

C. Increment the job priority in the activity monitor for the job

D. Cancel the job and the restart the job after changing the policy job priority

Answer: C

Explanation:

QUESTION NO: 117




46/92

Which three describe an effective data loss prevention (DLP) program? (Select three.)

A. DLP is a company-wide initiative.

B. DLP is primarily driven by Information Security.

C. DLP is primarily driven by the Incident Response Team.

D. Employee participation is important.

E. Business stakeholders are held accountable for risk reduction.

Answer: A,D,E

Explanation:

QUESTION NO: 118

What must exist before running a manual backup?

A. An on demand storage unit

B. Adata classification

C. Aschedule

D. ATrue Image Restore fragment

Answer: C

Explanation:

QUESTION NO: 119

An administrator tries to suspend an active job from the Symantec NetBackup Activity Monitor but

discovers that the option is grayed out.

What is preventing the administrator from suspending the job?

A. Encryption is enabled.

B. The parent job is still active.

C. Multiplexing is enabled.

D. Checkpoint restart is disabled.

Answer: D

Explanation:




47/92

-

-

-

QUESTION NO: 120

A restore must be performed. An administrator is attempting to view the valid images for a client,

but the following error occurs:

WARNING: Server does not contain any valid images.

Which two may be configured incorrectly? (Select two.)

A. Schedule type for restores

B. Destination client for restores

C. Server to use for backups and restores

D. Media server for backups and restores

E. Policy types for restore

Answer: C,E

Explanation:

QUESTION NO: 121

Where does an incident responder find the exact matches that triggered an incident?

A. Dashboard report

B. Incident Snapshot

C. Incident List

D. System Events report

Answer: B

Explanation:

QUESTION NO: 122

A file system on a server is corrupt and a restore is required. The system is being backed up using

True Image Restore with move detection enabled.

The most recent backups of this file system are displayed below:

Monday: A full backup

Tuesday: A differential incremental backup

Wednesday: A cumulative incremental backup




48/92

- Thursday: A differential incremental backup

What is the maximum number of backup images that will be used to restore all of the most recent

data for this server?

A. One

B. TwoC. Three

D. Four

Answer: C

Explanation:

QUESTION NO: 123

A backup administrator needs to perform file system restore operations for two important client

systems, client1 and client2. Dedicated resources are available for restore jobs but only one

restore job may run at a time. When submitted, the restore jobs will be queued until a restore job

that is already running is completed. The restore job for client1 must be performed first and the

restore job for client2 must run before any other restore jobs that may be added to the job queue.

In the Backup, Archive, and Restore (BAR) GUI, which job priority values would allow for the

client1 restore to run first, followed by the client2 restore, and finally any other restore jobs that

may be submitted?

A. client1: 84000; client2: 85000

B. client1: 85000; client2: 84000

C. client1: 91000; client2: 92000

D. client1: 92000; client2: 91000

Answer: D

Explanation:

QUESTION NO: 124

An administrator is unable to back up all client data within a given backup window. The current

configuration is displayed below.

One Master/Media server




49/92

4x 1GB network connection

4GB Fibre Channel HBA to tape

Library with 4 LTO3 tape drives (max 4 drives)

150 clients with 100 MB network connections.

How should the administrator improve performance and decrease backup elapsed time?

A. Enable multiplexing in the policy schedules

B. Replace LTO3 drives with LTO5 drives

C. Replace the network switch with a 10GB switch

D. Enable client side compression

Answer: A

Explanation:

QUESTION NO: 125

Which area of the Administration Console displays the throughput of backups for all clients?

A. Status of Backups report

B. Device Monitor display

C. All Log Entries report

D. Client Backups report

Answer: C

Explanation:

QUESTION NO: 126

An administrator needs to tune how frequently storage lifecycle policies are processed.

Which setting should an administrator modify?

A. DUPLICATION_SESSION_INTERVAL_MINUTES

B. MAX_MINUTES_TIL_DUPLICATION_JOBC. DUPLICATION_SESSION_INTERVAL_SECONDS

D. MAX_SECONDS_TIL_DUPLICATION_JOB




50/92

Answer: A

Explanation:

QUESTION NO: 127

A master server controls five media servers, each running 100 jobs per day. The master server

has two CPUs and 2 GB of RAM. A company purchases an additional media server and adds it to

the Symantec NetBackup 7.5 domain. The performance of the master server is severely affected

and jobs are now queuing.

Which action should an administrator take to resolve this problem?

A. add disk space to the master serverB. add CPUs to the master server

C. add memory to the master server

D. add HBAs to the master server

Answer: A

Explanation:

QUESTION NO: 128

What is the recommended deployment location for Network Monitor?

A. Inside the secured corporate LAN

B. Within the demilitarized zone (DMZ)

C. In its own isolated virtual LAN (VLAN)

D. On the WAN side of the corporate router

Answer: B

Explanation:

QUESTION NO: 129

An administrator needs to decrease the total amount of time required to back up a UNIX file

server, but requires a full backup every night for recovery purposes.




51/92

How should the administrator proceed?

A. use compression

B. use accelerator

C. use change journal

D. use client-side deduplication

Answer: B

Explanation:

QUESTION NO: 130

The Symantec NetBackup Startup and Shutdown commands on UNIX are "netbackup start" and

"netbackup stop".

What is the default installation directory where the "netbackup" command is located?

A. /usr/openv/netbackup/bin

B. /usr/openv/netbackup/bin/admincmd

C. /usr/openv/netbackup/bin/goodies

D. /usr/openv/netbackup/bin/support

Answer: C

Explanation:

QUESTION NO: 131

When a policy is applied for detection, how are exceptions evaluated?

A. Exceptions then detection rules

B. Detection rules then exceptions

C. Exceptions then response rules

D. Response rules then exceptions

Answer: A

Explanation:




52/92

QUESTION NO: 132

Which common status code related to storage units applies only to disk storage units?

A. 129

B. 213

C. 219D. 800

Answer: A

Explanation:

QUESTION NO: 133

An administrator initiated a manual backup of a clientA on master1. The backup failed with the

message "client is offline(1000)".

Which Host Properties setting should be modified to resolve this issue?

A. Clients > clientA > Windows Client > Client Settings > Offline until

B. Clients > clientA > General Server > Offline until

C. Master Servers > master1 > Client Attributes > clientA > Offline untilD. Master Servers > master1 > Windows Clients > clientA > Offline until

Answer: C

Explanation:

QUESTION NO: 134

Which status code is logged on the client when the source IP address of the media server

performing the backup is unresolvable to a hostname?

A. 13

B. 25

C. 46

D. 59

Answer: CExplanation:




53/92

QUESTION NO: 135


A Symantec NetBackup 7.5 client backup attempt fails with the error message "unable to allocate

new media for backup, storage unit has none available(96)". The policy is configured to use the

storage unit displayed below.

The available_media report shows the image in the exhibit.

Which configuration change must be made to the Storage Unit configuration to allow the backup to

use the media that are available in the Scratch pool?

A. Change the storage unit type

B. Change the host connectionC. Change the density

D. Change the robot type




54/92

Answer: C

Explanation:

QUESTION NO: 136

Which two traffic feed sources should be used for Network Monitor? (Select two.)

A. Test Access Port (TAP)

B. trunking port on a hub

C. Switched Port Analyzer (SPAN) port

D. router LAN port

E. tunneled port on a VPN router

Answer: A,C

Explanation:

QUESTION NO: 137

A storage unit group is configured that has disk and then tape listed. During a backup session,

jobs start retrying and then running on the tape device only.

What is a likely cause of the change?

A. The disk storage unit is full.

B. The tape device was listed first in the storage unit group.

C. The tape device was listed second in the storage unit group.

D. The disk storage unit is staging to tape.

Answer: A

Explanation:

QUESTION NO: 138

A Windows 2008 R2 64-bit client backup job hung. The Symantec NetBackup administrator

cancelled the job in the Administration Console and restarted the Symantec NetBackup Client

service on the client. The administrator initiated another backup of the client and it also hung.




55/92

Which Symantec NetBackup client process should be terminated to allow new backups to occur?

A. bpcd

B. bpbkar

C. vnetd

D. bpbkar32

E. bpbkar64

Answer: D

Explanation:

QUESTION NO: 139

What does the Job PID represent in the Detailed Status for a file system backup job?

A. the process ID for the bpbkar process of the client

B. the process ID for the nbjm process on the master server

C. the process ID for the bpbrm process on the media server

D. the process ID for the bptm process on the media server

Answer: C

Explanation:

QUESTION NO: 140

An administrator successfully creates a disk pool for Symantec NetBackup 7.5, then attempts to

create a new storage unit using the bpstuadd command. In the bpstuadd command, the storage

unit name is specified as diskpool1_storageunit-#01. An error message is returned indicating the

storage unit name is invalid.

How should the storage unit name be modified to fix the problem?

A. Remove the "-" from the name

B. Remove all the numbers from the name

C. Remove the "#" from the name

D. Shorten the name to fewer than twenty characters

Answer: B

Explanation:




56/92

QUESTION NO: 141

A backup job failed. The backup administrator needs to collect log files for the services and

daemons that use Unified-style logging.

Which step must be performed by the backup administrator before sending the collected log files

to Symantec technical support for analysis?

A. Create log directories for the Symantec NetBackup services and daemons

B. Set the Global logging level setting to a value of 5

C. Run nbsu on the master server

D. Run nbcplogs on the master server

Answer: D

Explanation:

QUESTION NO: 142

Which method encrypts the Oracle password on the Enforce Server?

A. Rivest, Shamir, Adleman (RSA)

B. Data Encryption Standard (DES)

C. Secure Socket Layer (SSL)

D. Advanced Encryption Standard (AES)

Answer: D

Explanation:

QUESTION NO: 143

An administrator has successfully recovered all Symantec NetBackup 7.5 catalogs, which used

the only two catalog backup tapes. A number of backups have taken place and a catalog backup

is run automatically. The catalog backup fails with an error code 96. The administrator investigates

and discovers that all of the tapes have been allocated.

What is the cause of this error?




57/92

A. The catalog recovery freezes the catalog tapes.

B. The catalog recovery suspends the catalog tapes.

C. The catalog recovery freezes the catalog tapes in the NBU-Catalog volume pool.

D. The catalog recovery suspends the catalog tapes in the NBU-Catalog volume pool.

Answer: A

Explanation:

QUESTION NO: 144

An organization protects Windows clients with archive bit selected. The organization runs full

backups weekly on Friday. Daily incrementals run nightly for the rest of the week. An administrator

had to perform a full catalog recovery on Wednesday.


A. Expire the older catalog backup images

B. Modify the schedules to run backups immediately

C. Perform an immediate catalog backup

D. Perform a manual full backup for the clients

Answer: D

Explanation:

QUESTION NO: 145

The master server has failed and must be recovered. The location containing the DR file was lost

with the master server and the email containing the DR file is unavailable.

Which option exists for recovering the catalog?

A. use bpimport -drfile to recover the DR file from the catalog tape

B. use bprecover -wizard -nodrfile to recover the catalog

C. use bprestore -nodrfile on the most recent catalog backup image

D. use bpimport to import all the images on the catalog tape

Answer: A

Explanation:




58/92

QUESTION NO: 146

When setting different severity levels, which level should be set as the default?

A. The highest level available in the system

B. The lowest level available in the system

C. The lowest level the policy manager wants to assignD. The highest level the policy manager wants to assign

Answer: C

Explanation:

QUESTION NO: 147

How can an incident responder remediate multiple incidents simultaneously?

A. by selecting a Smart Response on the Incident Snapshot page

B. by selecting an Automated Response on an Incident List report

C. by selecting a Smart Response on an Incident List report

D. by selecting the Find Similar command on the Incident Snapshot page

Answer: C

Explanation:

QUESTION NO: 148

During catalog recovery the DR file is unavailable but the images database is intact.

Which step should the administrator take first to resolve the issue?

A. identify catalog backup from the images database

B. run import on all media in the robot

C. import catalog image to disk to a temporary location

D. run bprecover -wizard from the command line with additional switches

Answer: A

Explanation:




59/92

QUESTION NO: 149

Which product lets an incident responder see who has access to confidential files on a public file

share?

A. Network Protect

B. Network Monitor

C. Network Prevent

D. Network Discover

Answer: D

Explanation:

QUESTION NO: 150

What happens when a DLP Agent is unable to connect to its preferred Endpoint Server?

A. If any detection server in the system is running, the agent automatically connects to it after a

period of time.

B. If any Endpoint Server is running, the agent automatically connects to it after a period of time.

C. If any Endpoint Server is running, and if the agent is configured to recognize it, the agentconnects to it after a period of time.

D. If any detection server is running, and if the agent is configured to recognize it, the agent

connects to it after a period of time.

Answer: C

Explanation:

QUESTION NO: 151

Which three options can incident responders select when deleting incidents? (Select three.)

A. Delete the incident completely

B. Delete the original message and retain the incident

C. Delete the incident and retain the violating attachments or files

D. Delete the incident and export incident details to .csv file

E. Delete the non-violating attachments or files and retain the incident

Answer: A,B,E




60/92

Explanation:

QUESTION NO: 152

Which kind of detection server can block file transfer protocol (FTP) requests?

A. Network Monitor Server

B. Email Prevent Server

C. Web Prevent Server

D. Endpoint Prevent Server

Answer: C

Explanation:

QUESTION NO: 153

Which three statements apply to communication between the Enforce Server and detection

servers? (Select three.)

A. By default, the Enforce Server and the detection servers communicate over port 8100.B. Port 3389 must be open between the Enforce Server and the detection servers.

C. The same port number must be used for all detection servers.

D. The servers can be configured to use any port higher than 1024.

E. IPSec must be configured on the Enforce Server and the detection servers.

Answer: A,C,D

Explanation:

QUESTION NO: 154

A company expanded the Symantec NetBackup 7.5 environment by adding a new media server.

What is the fastest way to update several hundred Symantec NetBackup clients with the new

media server information?

A. Run the update_all_clients script

B. Run the add_media_server_on_clients script




61/92

C. Run the install_bp script

D. Run the install_client_files script

Answer: B

Explanation:

QUESTION NO: 155

A system administrator can see basic incident data, but is unable to view any of the specific details

of the incidents that are created.

How is the role configured?

A. The View option is selected, but Display Attributes are deselected.

B. The Edit option is deselected in the General tab.

C. Status and custom attributes are selected, but set to Edit.

D. Conditions are configured in the Incident Access tab.

Answer: A

Explanation:

QUESTION NO: 156

How is the incident count for a new system managed in order to avoid overwhelming the incident

response team?

A. Match count thresholds are set.

B. More than one policy is enabled.

C. Many incident responders are allowed access to the system.D. Incidents are auto-filtered to hide false positives.

Answer: A

Explanation:

QUESTION NO: 157

Which command is used to manually register a new media server with the database on the master

server?




62/92

A. nbemmcmd

B. nbdevconfig

C. bpminlicense

D. bpsetconfig

Answer: A

Explanation:

QUESTION NO: 158

A Symantec NetBackup 7.5 administrator needs to prevent all client systems from performing

user-directed restore operations, while maintaining the client administrator's ability to view the

contents of backup images.


A. add DISALLOW_CLIENT_RESTORE to the Symantec NetBackup configuration settings on the

client systems

B. select the Allow browse only parameter for the clients included in the Client Attributes of the

master server Host Properties

C. select the Allow client browse parameter in the Host Properties of the client system

D. deselect the Allow client restore parameter in the Host Properties of the master server system

Answer: D

Explanation:

QUESTION NO: 159

What does Network Monitor use to identify network traffic going to a nonstandard port?

A. The originating domain

B. Total packet size

C. Either UDP or TCP

D. Protocol signature

Answer: D

Explanation:




63/92

QUESTION NO: 160

A backup of client1.domain is failing. The backup administrator contacted Symantec Support and

has been instructed to gather legacy-style debug logs at a logging level of 5 from client1.domain.

Which parameter in NetBackup Management > Host Properties must be modified to change the

level of detail contained in the logs for client1.domain?

A. Master Servers > [master_server_name] > Logging > Global logging level

B. Clients > [client_name] > Logging > Global logging level

C. Master Servers > [master_server_name] > Logging > Enable robust logging

D. Clients > [client_name] > Logging > Enable robust logging

Answer: B

Explanation:

QUESTION NO: 161

What is the sequence of message processing for Network Monitor?

A. Packet Capture -> File Reader -> Incident Writer

B. Detection -> Packet Capture -> Incident WriterC. Incident Persister -> Manager -> Notifier

D. Incident Persister -> File Reader -> Manager

Answer: A

Explanation:

QUESTION NO: 162

A tape library had the robot firmware upgraded and now the robot is reading the barcodes with

additional characters.

What can be done so that Symantec NetBackup 7.5 uses the same characters as before the

firmware upgrade occurred?

A. Update the Media ID Generation settingB. Update the Robot Type mapping

C. Update the Media Type mapping

D. Update the Barcode Rules setting




64/92

Answer: A

Explanation:

QUESTION NO: 163

By default, new media is assigned to which volume pool during robot inventory without a

configured barcode rule?

A. Symantec NetBackup pool

B. Scratch pool

C. Default pool

D. None pool

Answer: A

Explanation:

QUESTION NO: 164

A company decided to automatically allocate all media to any volume pool on demand.

Which two steps must be performed to meet this requirement? (Select two.)

A. Create volume pools as required without adding any volumes to the pools

B. Delete the scratch pool to allow for automatic volume allocation

C. Create barcode rules to automatically allocate volumes

D. Define a scratch pool and add all of the volumes to it

E. Use vmpool to set volume pools for on demand allocation

Answer: A,D

Explanation:

QUESTION NO: 165

Which command is used to determine the state of an AdvancedDisk storage server?

A. nbdevconfig

B. nbdevquery




65/92

C. nbemmcmd

D. nbdiscover

Answer: B

Explanation:

QUESTION NO: 166

Which two options are available to verify device configuration? (Select two.)

A. nbdevconfig

B. robtest

C. Device Configuration Wizard

D. bpmedia

E. tpconfig

Answer: B,C

Explanation:

QUESTION NO: 167

Under which high-level node in the left navigation panel can administrators find the System Events

report?

A. Reports

B. Policy

C. System Health

D. Administration

Answer: D

Explanation:

QUESTION NO: 168

Which two types of stakeholders should be included when writing policies? (Select two.)

A. Compliance

B. Education




66/92

C. Risk management

D. Messaging team

E. Marketing

Answer: A,C

Explanation:

QUESTION NO: 169

A Symantec NetBackup 7.5 administrator at a hospital needs to store secure tape copies of

protected data to an offsite location.

How can an administrator automatically eject tape media daily and create detailed reports?

A. enable the Encryption attribute on the vault policy to perform automated ejects and create

reports

B. use tape drives that support hardware encryption and use a Vault policy to perform automated

ejectsand create reports

C. use tape drives that support hardware encryption and use a storage lifecycle policy to

performautomated ejects and create reports

D. configure a storage lifecycle policy to enable automatic ejects and create reports, then enable

the Encryption attribute on the policy

Answer: B

Explanation:

QUESTION NO: 170





67/92

What will be the outcome of the policy shown in the exhibit?

A. The client will compress then encrypt the data before sending it to the media server.

B. The client will compress the data and then the media server will use tape drive encryption.

C. The client will send the data to the media server, which will compress and then encrypt the

data.

D. The client will encrypt the data before sending it to the media server.

Answer: A

Explanation:

QUESTION NO: 171

An administrator needs to protect a large volume of data with millions of files to tape.

Which policy feature should the administrator use?

A. Use accelerator

B. Deduplication

C. Use multiple streamsD. FlashBackup




68/92

Answer: D

Explanation:

QUESTION NO: 172

What is a situation that can be monitored by both Network Monitor and Endpoint Prevent?

A. An employee uses a Chrome 2 browser to post confidential data to a newsgroup.

B. An employee uses Skype to send an instant message to a friend at a competitor site.

C. An employee uses AIM to send an instant message while off the corporate network.

D. An employee uses Internet Explorer 7 to send confidential data from a Gmail account.

Answer: D

Explanation:

QUESTION NO: 173

Which relational database management system (RDBMS) does Symantec Data Loss Prevention

9.0 support?

A. Sybase

B. MySQL

C. IBM

D. Oracle

Answer: D

Explanation:

QUESTION NO: 174

How can a system administrator obtain the log files for a detection server? (Select three.)

A. Run the Log Collection Utility (LCU)

B. Navigate to the logs directory

C. Click Fetch Latest on the Server Detail page

D. Select Logs under Administration node

E. Download logs from the System Overview page




69/92

Answer: A,B,C

Explanation:

QUESTION NO: 175


An organization has the requirements listed below for a server's backup data.

Two copies must be retained for the same backup data.

One copy must be sent to disk with a retention period of one month.

A second copy must be sent to tape with a retention period of six months.

The copy on disk may only be automatically deleted by Symantec NetBackup after one month.




70/92

This must be configured without use of storage lifecycle policies.

How can a Symantec NetBackup 7.5 administrator configure a backup policy, maximizing

automation, to meet these requirements?

A. create a basic disk staging storage unit with a fixed retention of one month and staging to tapewith a retention of six months; configure the backup policy to use this disk

B. configure the backup policy to back up to a basic disk with retention of one month; run the

bpduplicate command to duplicate to tape with retention of six months

C. configure two identical schedules for the same policy, then configure one schedule to go to a

basic disk with retention of one month and configure the other schedule to go to tape with

retention of six months

D. configure the backup policy so that the schedule creates multiple copies: one to basic disk with

one month retention, and one to tape with six months retention

Answer: D

Explanation:

QUESTION NO: 176

What should a system administrator do to stop a detection server?

A. Access the Enforce Server Detail page and select "Done"

B. Access the Server Detail page and select "Stop"

C. Access a command prompt and enter the command "net stop service VontuMonitor"

D. Access the services panel and stop the VontuMonitorController service

Answer: B

Explanation:

QUESTION NO: 177

Which two can cause a Symantec NetBackup job to run more frequently than expected? (Select

two.)

A. Apolicy schedule that allows multiple copies

B. Image expiration

C. Presence of a synthetic backup schedule in the policy

D. True image restore with move detection

E. An administrator changing a policy




71/92

Answer: B,E

Explanation:

QUESTION NO: 178

In addition to creating an automated response rule, which action must a policy manager take for

the rule to execute?

A. Turn on response rules from the Settings page

B. Add the response rule to the appropriate policy

C. Click the Response Rule button to execute

D. Enable Remediate Incidents privilege in the appropriate role

Answer: B

Explanation:

QUESTION NO: 179

What is a function of the Enforce Server?

A. Provides a GUI for policy creation

B. Detects incidents

C. Writes incidents to all detection servers

D. Deploys agents to endpoint computers

Answer: A

Explanation:

QUESTION NO: 180

How should a policy manager write p

nbu 7.5 dumps(unix) v5.0.pdf

Documents