national rubber conference, 2016 th april, 2016. · national rubber conference, 2016 held at hotel...
TRANSCRIPT
NATIONAL RUBBER CONFERENCE, 2016 HELD AT HOTEL LE‐MERIDIEN, NEW DELHI ON 29TH AND 30TH
APRIL, 2016.
Theme ““TECHNOLOGICAL INNOVATION, GREEN ENERGY AND BRAND CREATION- KEY TO SUCCESS”
The first of Fifth in its series National Rubber Conference, 2016 was organized by the Northern Region
of AIRIA on 29th and 30th April, 2016 at the strategically located Le‐Meridien, New Delhi. With the
lighting of traditional lamp the Conference was inaugurated by Shri A Jayathilak, IAS, Chairman, Rubber
Board as Chief Guest in absentia Shri Rajani Ranjan Rashmi, Addl. Secretary, Ministry of Commerce.
Shri Rajendra V Gandhi, President, IRMRA graced the occasion as Guest of Honor. At the outset Shri
Vipan Mehta addressed the gathering with welcome speech. As Addl. Secretary, Commerce Ministry
could not attend the inaugural function due to exigency of official duties his good will message was read
out. This was followed by the addresses of Shri Anil Arora, National Convener, NRC2016, and Shri
Mohinder Gupta, President, AIRIA. The concerns of rubber industry was highlighted by Shri Gupta like
– domestic production of natural rubber being far less than the consumption which was only 50% and
that the domestic rubber prices were ruling 20% higher than the international prices. Then the inverted
duty structure was brought forward leading to shutting down of production unit by manufacturers and
turning into traders of Chinese rubber goods. Its direct impact on job losses and also on moulded rubber
goods, rubber rice rollers and balloon manufacturers etc. Citing India’s Share in international market
as 1.48% compared to that of China at 11%. He was of the opinion that it can be enhanced to 5% in the
nexr 5‐7 years there up uplifting India’s ranking to 5th position from current 19th position for which the
Govt. addresses the problems faced by the Rubber Industry.
The President of IRMRA, Shri Rajendra V Gandhi, addressed with an encouraging speech to the
industry. He was optimistic of opening more regional rubber research centers in the coming days.
The Chief Guest Shri A. Jayathilak, Chairman Board, urged the rubber industry to participate actively in
discussions on anti‐dumping and safeguard measures introduced by the Government. His concern of
influx of cheap imports from China was hurting the MSME sector. Appeasing the concerns of industry
of not being meted out equal treatment between industry and plantations issues he said the Rubber
board places equal importance to the development of both natural rubber producing and consuming
interest.
Shri Ashwani Sarin, Chief Convener, NRC16, Delhi gave the votes of thanks.
Shri Anil Arora, meticulously planned the topics relating the theme. The Conference had a total of Six
technical sessions with 17 slots. The eminent speakers spared their valuable time to share their rich
experience and their valued thoughts with the delegates on the following topics:
Future of World Economy and its impact on Rubber Industry
Developments of SBR Application in Non‐tyre products
Naphthanics process oil‐ safe and sustainable technology for Environmental challenges
Vulcanisation of Elastomers
Novel Tackifier Resins
Silicone Elastomers‐ overview on applications and processing
Presentation on India Rubber Expo,2017
Chemlok Hybrid Solutions‐ A Green Step Forward
Current Scenario & Future Opportunities in Solar Energy Sector
Rubber Nano Composites ‐ Challenges and Opportunities for future of Rubber Industry
Technological Innovation and Green Energy in Rubber Technology with reference to Make in
India
Carbon Black for Special Applications
Nano materials hold the key to sustainable growth of Rubber & Tyre Industries
Using marketing strategy tools for branding
Auto Industry Outlook and Perspective
Skill Development – Your Search Ends Here
Rubber for Underwater Sensor Applications
Panel discussion‐ Technological Innovation, Green Energy and Brand Creation‐ Key to Success
The presentations bacon the light for delegates to take things forward and proved worthy of their
guidance. The Chairmen and Co‐Chairmen conducted the proceedings of each session.
A Panel Discussion followed the Technical Session and the topic was on the theme of the Conference
with a brain storming session. Shri Anil Arora, as Moderator kept the delegates attracted throughout.
Members of the discussion panel were Dr. Arup K Chandra of Apollo Tyres, Prof Anil Bhowmick, Ex
Director of IIT Patna and Senior Professor Rubber Technology Centre, IIT Kharagpur, Shri Rajiv Budhraja,
Director General, ATMA, Shri Monojit Mukherjee, Head (Carbon black) Himadri Chemicals and
Industries, and Shri Kishor Katkar, Head Technical Services and Business Development, ISRPL.
The Event of this magnitude was supported by Sponsors from well known rubber and synthetic rubber,
Chemicals etc. There were encouraging numbers of delegates including those from foreign, sponsors
and student delegates.
The advertisement support to the Event from the industry was of greater numbers.
A gala dinner was organized on the 29th April, 2016.
All the sponsors and organizing committee members were felicitated with mementoes. Shri Anshul
Sarin, one of the members of Organizing Committee, NRC16, planned the arrangements, sequencing
and their execution
The Conference concluded with a valedictory speech by Shri Ashwani Sarin, Chief Convener of NRC16.
NATIONAL RUBBER CONFERENCE, 2016
29-30 APRIL, 2016 Le Meridien (Sovereign II), New Delhi “TECHNOLOGICAL INNOVATION, GREEN ENERGY AND BRAND CREATION- KEY TO SUCCESS”
PROGRAMME DAY 1 - FRIDAY, 29
TH APRIL, 2016
TIME TOPIC SPEAKER
09:30-10:00 REGISTRATION
10:00-11.00
Inaugural Session Chief Guest – Shri Rajani Ranjan Rashmi, Additional Secretary, Ministry of Commerce Guest of Honor- Shri Rajendra V. Gandhi, President, IRMRA, Thane
11:00-11:30 Tea Break
TECHNICAL SESSION - I
11.30-12.30 Future of World Economy and its impact on Rubber Industry
Dr. R. Mukhopadhyay Director ( R&D), JK Tyres and Director & Chief Executive -HASETRI
12.30 -13.00 Developments of SBR Application in Non-tyre products Shri. RC Ghosh, Head Technical Services, SBR , Reliance Industris Ltd.
13.00 -13.30 Naphthanics process oil- safe and sustainable technology for Environmental challenges
Mr. Vikas Tiwari, Segment Head Tyre & -CMI ,Nynas Naphtnenics Pvt. Ltd
13.30 -14.15 Lunch Break
TECHNICAL SESSION - II
14.15-15.00 Vulcanisation of Elastomers Prof Kala Sridharan, Visiting Professor- SJ College of Engineering, Mysuru
15.00-15.30 Novel Tackifier Resins Dr. A.S. Goshal, Director (Technical) Singh Palsticisers and Resins (I) Pvt Ltd.
15.30-16.00 Silicone Elastomers- overview on applications and processing
Mr. Abirami Srikanth, and Mr. Balaji P. Momentive
16.00-16.30 Tea Break
TECHNICAL SESSION III
16.30-16.45 Presentation on India Rubber Expo,2017 Mr V T Chandhrasekharan, Chairman SR ,AIRIA & Convenor IRE 2017
16.45-17.15 Chemlok Hybrid Solutions- A Green Step Forward Mr.Tushar Dalvi, Lord Corporation
17.15-17.45 Current Scenario & Future Opportunities in Solar Energy Sector
Mr.Prafulla Pathak, Secretary General ,Solar Energy Society of India
17.45-18.25 Rubber Nano Composites - Challenges and Opportunities for future of Rubber Industry".
Dr. K. Rajkumar, Director, IRMRA,Thane
19.00 onwards Networking Cocktails/ Dinner
DAY 2- Saturday , 30TH
APRIL, 2016 TECHNICAL SESSION IV
10.00-11.00 Technological Innovation and Green Energy in Rubber Technology with reference to make in India.
Prof. Anil Bhowmik, Ex Director IIT Patna and Senior Prof. Rubber Technology Centre, IIT Kharagpur
11.00-11.30 Carbon Black for Special Applications Mr. S.M. Lahiri (Plant Head,Palej), Philips Corbon Black Limited.CBL
11.30-12.00 Tea Break
TECHNICAL SESSION V
12.00-12.30 Nano materials hold the key to sustainable growth of Rubber & Tyre Industries.
Dr. Arup K Chandra, Global Head , Apollo Tyres Ltd
12.30-13.00 Using marketing strategy tools for branding Mr. S.P. Joshi , CEO, Markstrat Consulting P Ltd.,New Delhi
13.00-13.30 Auto Industry Outlook and Perspective Mr. Gaurav Batra, Associate Director, Global Automotive and Transportation Coordinating Analyst
13.30-14.00 Skill Development – Your Search Ends Here! Ms.Shewani Nagpal, Director – Affiliation & Training, RSDC
14.00-14.45 Lunch Break
TECHNICAL SESSION VI
14.45-15.15 Rubber for Underwater Sensor Applications Mr.P. Annadurai, Scientist, NPOL, DRDO Lab, Ministry of Defence,
15.15-16.30 Panel discussion- Technological Innovation, Green Energy and Brand Creation- Key to Success
Moderator – Mr. Anil Arora, National Convener, NRC 2016
16.30-16.45` VALEDICTORY SESSION
16.45-17.00 TEA
CONFERENCE CONCLUDES