nastar operator guide-(v600r008_03)

8/2/2019 Nastar Operator Guide-(V600R008_03)

1/1022

Nastar

V600R008

Operator Guide

Issue 03

Date 2010-06-30

HUAWEI TECHNOLOGIES CO., LTD.


2/1022


3/1022

Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representations

of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Issue 03 (2010-06-30) Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

i
http://www.huawei.com/


4/1022


5/1022

About This Document

Intended Audience

The intended audiences of this document are:

l Network planning and optimization engineers

l Operation and maintenance (OM) engineers

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains

all updates made in previous issues.

Changes in Issue 03 (2010-06-30)This is the third release.

Changes in Issue 02 (2010-05-30)

This is the second release.

Changes in Issue 01 (2010-04-20)

This is the initial release.

Nastar

Operator Guide About This Document



iii


6/1022


7/1022

Contents

About This Document...................................................................................................................iii

1 Overview of the Nastar Performance Analysis System......................................................1-1

1.1 Introduction to the Nastar Performance Analysis System...............................................................................1-2

1.2 Position of the Nastar on the network.............................................................................................................1-71.3 Performance Analysis Process........................................................................................................................1-8

2 Getting Started............................................................................................................................2-1

2.1 Logging In to the Nastar..................................................................................................................................2-3

2.1.1 Login Modes..........................................................................................................................................2-3

2.1.2 Login Process.........................................................................................................................................2-4

2.2 Changing the Password of the Current User...................................................................................................2-6

2.3 Customizing the Client GUI Effect.................................................................................................................2-6

2.3.1 Setting the Font Size..............................................................................................................................2-6

2.3.2 Setting the Information Output Area.................................... ..................................................................2-72.3.3 Setting the Number Format of the Client...............................................................................................2-8

2.3.4 Setting the Time and Date Formats of the Client...................................................................................2-9

2.3.5 Setting the Toolbar...............................................................................................................................2-10

2.4 Locking the Client.........................................................................................................................................2-11

2.5 Unlocking the Client.....................................................................................................................................2-12

2.6 Broadcast Messages......................................................................................................................................2-13

2.6.1 Setting Broadcast Parameters...............................................................................................................2-13

2.6.2 Sending Broadcast Messages...............................................................................................................2-13

2.7 Displaying the Current Window in Full Screen Mode..................................................................................2-14

2.8 Setting the Alarm Sound at Network Disconnection....................................................................................2-14

2.9 Checking Whether the Client Needs Upgrade..............................................................................................2-15

2.10 Setting the Interval of Client Upgrade Check.............................................................................................2-15

2.11 Managing the Nastar License......................................................................................................................2-16

2.11.1 Querying the Nastar License..............................................................................................................2-16

2.11.2 Updating the Nastar License..............................................................................................................2-16

2.12 Engineering Parameter Management..........................................................................................................2-17

2.12.1 Importing/Exporting Engineering Parameters...................................................................................2-17

2.12.2 Querying Engineering Parameters.....................................................................................................2-19

2.13 Creating Custom NE Groups.......................................................................................................................2-20

Nastar

Operator Guide Contents



v


8/1022

2.14 Querying NE Data.......................................................................................................................................2-23

2.15 Reference for the Performance Analysis System GUI................................................................................2-24

2.15.1 Interface Description: Nastar Client...................................................................................................2-24

2.15.2 Nastar Menu Functions Reference.....................................................................................................2-26

2.15.3 Keyboard Shortcuts............................................................................................................................2-29

2.15.4 Parameters for Creating or Modifying the Server Information..........................................................2-31

2.15.5 Parameters for Setting the Output GUI..............................................................................................2-32

2.15.6 Parameters for Setting the Time and Date Formats...........................................................................2-33

2.15.7 Parameters for Querying the Nastar License .....................................................................................2-35

2.15.8 Parameters for Setting Broadcast Parameters....................................................................................2-36

2.15.9 Parameters for Printing.......................................................................................................................2-36

2.15.10 Parameters for Importing and Exporting Engineering Parameters..................................................2-38

2.15.11 Parameters for Creating and Modifying Custom NE Groups..........................................................2-43

2.16 FAQs about the Client Operations..............................................................................................................2-43

2.16.1 How Can I View the Complete Text?................................................................................................2-44

2.16.2 The Left Mouse Button Not Respond................................................................................................2-44

2.16.3 The Help Window Not Respond........................................................................................................2-44

2.16.4 Some Records Not Selected When I Select Multiple Records...........................................................2-45

2.16.5 The Nastar Client Cannot Read the File to Be Printed......................................................................2-45

2.16.6 Menu Items Gray and Unavailable.....................................................................................................2-45

3 Monitoring the Nastar Server..................................................................................................3-1

3.1 Setting the Monitoring Parameters..................................................................................................................3-2

3.1.1 Setting the Parameters for the Nastar Server Monitoring...................................................................... 3-2

3.1.2 Setting the Parameters for the Nastar Server Hard Disk Monitoring.....................................................3-3

3.1.3 Setting the Parameters for the Nastar Server Database Monitoring.......................................................3-3

3.1.4 Setting the Parameters for the Nastar Server Service Monitoring......................................................... 3-4

3.2 Monitoring the Status of the Nastar Server.....................................................................................................3-4

3.2.1 Monitoring the Nastar Server Service Status.........................................................................................3-5

3.2.2 Monitoring the Nastar Server Process Status.........................................................................................3-5

3.2.3 Monitoring the Nastar Server Hard Disk Status.....................................................................................3-6

3.2.4 Monitoring the Nastar Server Database Status...................................................................................... 3-6

3.2.5 Monitoring the Nastar Server Status......................................................................................................3-73.2.6 Viewing the Information about Nastar Server Components..................................................................3-7

3.2.7 Refreshing the Monitoring Information.................................................................................................3-7

3.2.8 Saving the Monitoring Information........................................................................................................3-8

3.3 Reference of the System Monitoring GUI...................................................................................................... 3-8

3.3.1 Parameters for Setting Monitoring Parameters of the Nastar Server.....................................................3-9

3.3.2 Parameters for Monitoring the Nastar Server Service Status...............................................................3-16

3.3.3 Parameters for Monitoring the Nastar Server Process Status...............................................................3-17

3.3.4 Parameters for Monitoring the Nastar Server Hard Disk Status..........................................................3-17

3.3.5 Parameters for Monitoring the Nastar Server Database Status............................................................3-18

3.3.6 Parameters for Monitoring the Nastar Server Status............................................................................3-19

Contents

Nastar

Operator Guide

vi Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


9/1022

3.3.7 Parameters for Viewing the Information about Nastar Server Components........................................3-20

4 Security Management................................................................................................................4-1

4.1 Introduction to Security Management.............................................................................................................4-2

4.1.1 Security Management.............................................................................................................................4-24.1.2 Concepts of Nastar Security...................................................................................................................4-2

4.1.3 Nastar User Rights Management Policies..............................................................................................4-4

4.1.4 Operation Rights List for the Nastar Application..................................................................................4-4

4.2 Setting Security Policies of Nastar Users........................................................................................................4-7

4.2.1 Setting the Nastar Login Mode..............................................................................................................4-7

4.2.2 Setting the Access Control List..............................................................................................................4-8

4.2.3 Setting the Password Policy...................................................................................................................4-9

4.2.4 Setting the Account Policy...................................................................................................................4-10

4.3 Creating Nastar Users and Assigning Permissions.......................................................................................4-10

4.3.1 Procedure for Creating Nastar Users....................................................................................................4-10

4.3.2 Creating an Operation Set....................................................................................................................4-11

4.3.3 Creating a User Group..........................................................................................................................4-12

4.3.4 Creating a Nastar User Account...........................................................................................................4-13

4.3.5 Examples for Creating Nastar Users and Assigning Permissions........................................................4-14

4.4 Comparing the Nastar User Rights................................................................................................................4-16

4.5 Querying the Authorization...........................................................................................................................4-16

4.6 Modifying a Nastar User...............................................................................................................................4-17

4.6.1 Resetting the Password of a Nastar User.............................................................................................4-17

4.6.2 Modifying an Operation Set.................................................................................................................4-18

4.6.3 Modifying a User Group......................................................................................................................4-19

4.6.4 Modifying the Information about a Nastar User..................................................................................4-20

4.7 Managing Nastar Operation Sets...................................................................................................................4-21

4.7.1 Nastar Operation Sets...........................................................................................................................4-21

4.7.2 Creating an Operation Set....................................................................................................................4-22

4.7.3 Modifying an Operation Set.................................................................................................................4-23

4.7.4 Deleting an Operation Set....................................................................................................................4-24

4.7.5 Exporting or Importing Operation Sets................................................................................................4-25

4.8 Monitoring aNastar User..............................................................................................................................4-274.8.1 Monitoring the Nastar User Sessions...................................................................................................4-27

4.8.2 Forcing a User to Quit a Session..........................................................................................................4-29

4.8.3 Unlocking a User Account...................................................................................................................4-29

4.8.4 Sending Messages to Online Users......................................................................................................4-30

4.9 Reference of the Security Management GUI................................................................................................4-30

4.9.1 Parameters for Setting a Nastar Password Policy................................................................................4-31

4.9.2 Parameters for Setting a Nastar Account Policy..................................................................................4-35

4.9.3 Parameters for Creating a User............................................................................................................4-36

4.9.4 Parameters for Creating a Nastar User Group......................................................................................4-41

4.9.5 Parameters for Creating an Operation Set............................................................................................4-43

Nastar




vii


10/1022

4.9.6 Parameters for Setting the Nastar User Information............................................................................4-44

4.9.7 Parameters for Setting the Nastar User Group Information.................................................................4-47

4.9.8 Parameters for Assigning Operation Rights to Nastar Users and User Groups...................................4-48

5 Log Management........................................................................................................................5-15.1 Getting to Know Log Management.................................................................................................................5-2

5.1.1 Log Management Function....................................................................................................................5-2

5.1.2 Log Types...............................................................................................................................................5-2

5.2 Managing Operation Logs...............................................................................................................................5-6

5.2.1 Querying Operation Logs.......................................................................................................................5-6

5.2.2 Collecting Statistics on Operation Logs.................................................................................................5-8

5.3 Managing System Logs...................................................................................................................................5-8

5.3.1 Querying System Logs...........................................................................................................................5-9

5.3.2 Collecting Statistics on System Logs...................................................................................................5-10

5.4 Managing Security Logs...............................................................................................................................5-11

5.4.1 Querying Security Logs.......................................................................................................................5-11

5.4.2 Collecting Statistics on Security Logs.................................................................................................5-13

5.5 Setting Log Templates..................................................................................................................................5-14

5.6 Managing Log Data.......................................................................................................................................5-15

5.6.1 Dumping Nastar Logs..........................................................................................................................5-16

5.6.2 Setting Nastar Log Export....................................................................................................................5-16

5.7 Reference of the Log Management GUI.......................................................................................................5-17

5.7.1 Security Log List..................................................................................................................................5-18

5.7.2 Parameters for Querying Operation Logs............................................................................................5-25

5.7.3 Parameters for Collecting Statistics on Operation Logs......................................................................5-28

5.7.4 Parameters for Querying System Logs.................................................................................................5-30

5.7.5 Parameters for Collecting Statistics on System Logs...........................................................................5-31

5.7.6 Parameters for Querying Security Logs...............................................................................................5-33

5.7.7 Parameters for Collecting Statistics on Security Logs.........................................................................5-35

5.7.8 Parameters for Querying Device Logs.................................................................................................5-38

5.7.9 Parameters for Setting Log Dump and Export.....................................................................................5-38

6 GIS Management.......................................................................................................................6-1

6.1 Viewing Analysis Results by Using the Google Earth...................................................................................6-2

6.2 Viewing Analysis Results Through the GIS Window....................................................................................6-3

6.3 Managing the GIS Window.............................................................................................................................6-4

6.3.1 Importing a Map.....................................................................................................................................6-5

6.3.2 Loading Site Information.......................................................................................................................6-6

6.3.3 Filtering Cells.........................................................................................................................................6-7

6.3.4 Moving/Zooming In On/Zooming Out On/Refreshing/Fully Displaying a Map...................................6-8

6.3.5 Measuring Distance on the Map.............................................................................................................6-9

6.3.6 Saving the Map Display Effect..............................................................................................................6-9

7 OSS Management.......................................................................................................................7-1

Contents

Nastar

Operator Guide

viii Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


11/1022

7.1 Basic Knowledge of OSS Management..........................................................................................................7-2

7.2 Creating an OSS..............................................................................................................................................7-2

7.3 Viewing the Attributes of an OSS...................................................................................................................7-4

7.4 Modifying the Attributes of an OSS............................................................................................................... 7-4

7.5 Reference for the OSS Management GUI.......................................................................................................7-5

7.5.1 Interface Description: OSS Management...............................................................................................7-5

7.5.2 Parameters for Setting the Object Attributes of OSS Management.......................................................7-7

8 GSM Centralized Task Management.....................................................................................8-1

8.1 Basic Knowledge of Centralized Task Management......................................................................................8-3

8.1.1 Types of Timing Tasks...........................................................................................................................8-3

8.1.2 System Timing Tasks.............................................................................................................................8-4

8.1.3 UserTiming Task...................................................................................................................................8-4

8.1.4 Task Scheduling Parameters.................................................................................................................. 8-4

8.1.5 States ofa Timing Task..........................................................................................................................8-5

8.1.6 Customizing the Interface for Managing Timing Tasks........................................................................ 8-6

8.2 Creating a GSM User-Defined Timing Task.................................................................................................. 8-7

8.2.1 Creating a Data Collection Task............................................................................................................ 8-7

8.2.2 Creating a Task of Importing GSM Performance Data........................................................................8-13

8.2.3 Creating a Task of Importing GSM Configuration Data......................................................................8-16

8.2.4 Creating a Task of Importing GSM Uplink ARFCN Scanning Data...................................................8-18

8.2.5 Creating a Task of Importing GSM Measurement-Task Data.............................................................8-20

8.2.6 Creating a Task of Importing GSM/UMTS Neighboring-Cell Analysis Data.....................................8-23

8.2.7 Creating a Task of Importing GSM VIP Analysis Data.......................................................................8-25

8.2.8 Creating a Task of Importing GSM Cell Performance Analysis Data.................................................8-27

8.2.9 Creating a Task of Importing GSM Engineering Parameters..............................................................8-30

8.3 Modifying a GSM User-Defined Timing Task.............................................................................................8-32

8.3.1 Modifying a Data Collection Task.......................................................................................................8-33

8.3.2 Modifying a Task of Importing GSM Performance Data....................................................................8-33

8.3.3 Modifying a Task of Importing GSM Configuration Data..................................................................8-34

8.3.4 Modifying a Task of Importing GSM Uplink ARFCN Scanning Data...............................................8-35

8.3.5 Modifying a Task of Importing GSM Measurement-Task File Data...................................................8-35

8.3.6 Modifying a Task of Importing GSM/UMTS Neighboring-Cell Analysis Data.................................8-368.3.7 Modifying a Task of Importing GSM VIP Analysis Data...................................................................8-37

8.3.8 Modifying a Task of Importing GSM Cell Performance Analysis Data..............................................8-37

8.3.9 Modifying a Task of Importing GSM Engineering Parameters...........................................................8-38

8.4 Modifying a GSM Data Deletion Task.........................................................................................................8-39

8.4.1 Modifying the Task of Deleting GSM History Data............................................................................8-39

8.4.2 Modifying the Task of Deleting GSM Performance Data...................................................................8-40

8.4.3 Modifying the Task of Deleting GSM Configuration Data.................................................................8-41

8.4.4 Modifying a Task of Deleting GSM Uplink ARFCN Scanning Data..................................................8-42

8.4.5 Modifying a Task of Deleting GSM Measurement-Task File Data.....................................................8-42

8.4.6 Modifying a Task of Deleting GSM/UMTS Neighboring-Cell Analysis Data...................................8-43

Nastar




ix


12/1022

8.4.7 Modifying a Task of Deleting GSM VIP Analysis Data.....................................................................8-44

8.4.8 Modifying a Task of Deleting GSM Cell Performance Analysis Data................................................8-45

8.5 Modifying the Task of Backing Up Data......................................................................................................8-45

8.6 Setting the Suspend or Resume Time of a Timing Task...............................................................................8-46

8.7 Viewing Timing Tasks..................................................................................................................................8-47

8.7.1 Browsing the Information of Timing Tasks.........................................................................................8-47

8.7.2 Checking the Task Progress.................................................................................................................8-48

8.7.3 Checking the Task Execution...............................................................................................................8-48

8.8 Reference forthe GSM Centralized Task Management GUI.......................................................................8-49

8.8.1 Interface Description: Centralized Task Management.........................................................................8-50

8.8.2 Parameter for Setting Task Filter Conditions.......................................................................................8-51

8.8.3 Parameter for Setting Common Parameters for Timing Tasks............................................................8-52

8.8.4 Parameter for Setting the Time of a Common Periodic Task..............................................................8-53

8.8.5 Parameter for Setting the Time of a Common One-Time Task...........................................................8-54

8.8.6 Parameters for Creating or Modifying a Data Collection Task............................................................8-55

8.8.7 Parameters for Modifying the Task of Deleting History Data.............................................................8-57

8.8.8 Parameters for Modifying the Task of Deleting GSM Performance Data...........................................8-58

8.8.9 Parameters for Modifying the Task of Deleting GSM Configuration Data.........................................8-58

8.8.10 Parameters for Modifying the Task of Deleting the GSM Uplink ARFCN Scanning Data..............8-59

8.8.11 Parameters for Modifying the Task of Deleting the GSM Measurement-Task File Data.................8-59

8.8.12 Parameters for Modifying the Task of Deleting the GSM/UMTS Neighboring-Cell Analysis Data

.......................................................................................................................................................................8-60

8.8.13 Parameters for Modifying the Task of Deleting GSM VIP Analysis Data........................................8-60

8.8.14 Parameters for Modifying the Task of Deleting GSM Cell Performance Analysis Data..................8-61

8.8.15 Parameters for Modifying the Task of Backing Up Data...................................................................8-61

8.8.16 Parameters for Setting the Time of a Timing Task............................................................................8-62

9 GSM MR Analysis.....................................................................................................................9-1

9.1 Basic Knowledge of GSM MR Analysis........................................................................................................9-3

9.1.1 GSM MR Analysis Function................................................................................................ ..................9-3

9.1.2 TopN KPIs..............................................................................................................................................9-4

9.1.3 GSM MR Topics....................................................................................................................................9-7

9.2 Process of GSM MR Analysis........................................................................................................................9-89.3 Managing GSM MR Analysis Tasks............................................................................................................9-10

9.3.1 Creating GSM E2E Tasks....................................................................................................................9-11

9.3.2 Creating a GSM MR Analysis Task.....................................................................................................9-15

9.3.3 Modifying a GSM MR Analysis Task.................................................................................................9-17

9.3.4 Checking a GSM MR Analysis Task...................................................................................................9-17

9.4 Querying the GSM MR Overview Report....................................................................................................9-19

9.4.1 Querying the GBSC Report..................................................................................................................9-19

9.4.2 Querying the GSM Cell Group Report................................................................................................9-22

9.4.3 Querying a GSM TopN TRX Report...................................................................................................9-25

9.4.4 Querying a GSM MR Topic Analysis Report......................................................................................9-27

Contents

Nastar

Operator Guide

x Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


13/1022

9.5 Querying the MR Results of GSM Cells.......................................................................................................9-28

9.6 Comparing the GSM MR Analysis Results..................................................................................................9-30

9.7 Exporting the GSM MR Overview Reports..................................................................................................9-31

9.8 Reference for the GSM MR Analysis GUI...................................................................................................9-32

9.8.1 Interface Description: GSM MR Analysis...........................................................................................9-33

9.8.2 Parameters for Creating GSM E2E Tasks............................................................................................9-36

9.8.3 Parameters for Creating and Modifying GSM MR Analysis Tasks.....................................................9-42

9.8.4 Parameters for Querying GBSC Reports.............................................................................................9-45

9.8.5 Parameters for Querying the GSM Cell Group Reports......................................................................9-53

9.8.6 Parameters for Querying the GSM TopN TRX Reports......................................................................9-61

9.8.7 Parameters for Querying the GSM MR Topic Analysis Reports.........................................................9-67

9.8.8 Parameters for Querying the MR Analysis Results of GSM Cells......................................................9-73

9.8.9 Parameters for Comparing GSM MR Analysis Results.......................................................................9-79

10 GSM Neighboring Cell Analysis........................................................................................10-1

10.1 Basic Knowledge of GSM Neighboring Cell Analysis...............................................................................10-3

10.1.1 GSM Neighbor Cell Analysis Function.............................................................................................10-3

10.1.2 Algorithms for the GSM Neighboring Cell Analysis.........................................................................10-4

10.2 Procedure for Using GSM Neighboring Cell Analysis...............................................................................10-6

10.3 Managing GSM Neighboring Cell Analysis Tasks.....................................................................................10-8

10.3.1 Creating GSM E2E Tasks..................................................................................................................10-8

10.3.2 Creating a GSM Neighboring Cell Analysis Task...........................................................................10-12

10.3.3 Modifying a GSM Neighboring Cell Analysis Task........................................................................10-15

10.3.4 Checking a GSM Neighboring Cell Analysis Task.........................................................................10-1610.4 Querying GSM Neighboring Cell Analysis Reports.................................................................................10-17

10.5 Querying GSM Possible Neighboring Cell Analysis Reports..................................................................10-19

10.6 Exporting GSM Neighboring Cell Analysis Reports................................................................................10-21

10.7 Exporting GSM Possible Neighboring Cell Analysis Reports..................................................................10-25

10.8 Reference for the GSM Neighboring Cell Analysis GUI..........................................................................10-25

10.8.1 Interface Description: GSM Neighboring Cell Analysis.................................................................10-26

10.8.2 Interface Description: Possible Neighboring GSM Cell Analysis...................................................10-27

10.8.3 Parameters for Creating GSM E2E Tasks........................................................................................10-28

10.8.4 Parameters for Creating and Modifying Neighboring GSM Cell Analysis Tasks...........................10-34

10.8.5 Parameters for Querying the Analysis Reports of Neighboring GSM Cells....................................10-37

10.8.6 Parameters for Querying the Analysis Reports of Possible Neighboring GSM Cells.....................10-40

11 Neighboring GSM/UMTS Cell Analysis...........................................................................11-1

11.1 Basic Knowledge of Neighboring GSM/UMTS Cell Analysis..................................................................11-3

11.1.1 Neighboring GSM/UMTS Cell Analysis...........................................................................................11-3

11.1.2 Algorithm for the Neighboring GSM/UMTS Cell Analysis..............................................................11-4

11.2 Process of Neighboring GSM/UMTS Cell Analysis...................................................................................11-5

11.3 Managing Neighboring GSM/UMTS Cell Analysis Tasks.........................................................................11-8


11.3.2 Creating a Neighboring GSM/UMTS Cell Analysis Task...............................................................11-12

Nastar




xi


14/1022

11.3.3 Modifying Neighboring GSM/UMTS Cell Analysis Tasks.............................................................11-15

11.3.4 Querying Neighboring GSM/UMTS Cell Analysis Tasks...............................................................11-16

11.4 Querying Neighboring GSM/UMTS Cell Analysis Reports.....................................................................11-18

11.5 Querying Possible Neighboring GSM/UMTS Cell Analysis Reports......................................................11-19

11.6 Exporting Neighboring GSM/UMTS Cell Analysis Reports....................................................................11-21

11.7 Exporting Possible Neighboring GSM/UMTS Cell Analysis Reports.....................................................11-23

11.8 Reference to the Neighboring GSM/UMTS Cell Analysis Interface........................................................11-23


11.8.2 Parameters for Creating and Modifying Neighboring GSM/UMTS Cell Analysis Tasks...............11-29

11.8.3 Parameters for Querying the Analysis Reports of Neighboring GSM/UMTS Cells.......................11-31

11.8.4 Parameters for Querying the Analysis Reports of Possible Neighboring GSM/UMTS Cells.........11-33

12 GSM Frequency Analysis.....................................................................................................12-1

12.1 Basic Knowledge of GSM Frequency Analysis..........................................................................................12-3

12.1.1 GSM Frequency Analysis Function...................................................................................................12-3

12.1.2 Process of GSM Frequency Analysis.................................................................................................12-4

12.1.3 Process of GSM Frequency Optimization..........................................................................................12-5

12.1.4 Spacing Rules of GSM ARFCNs.......................................................................................................12-6

12.2 Procedure for Using GSM Frequency Analysis..........................................................................................12-7

12.3 Managing GSM Frequency Analysis Tasks................................................................................................12-9


12.3.2 Creating a GSM Frequency Analysis Task......................................................................................12-14

12.3.3 Modifying a GSM Frequency Analysis Task...................................................................................12-16

12.3.4 Checking a GSM Frequency Analysis Task....................................................................................12-1612.4 Querying GSM Frequency Analysis Reports............................................................................................12-18

12.4.1 Querying the Interference Matrix Report of GSM Measurement Cells...........................................12-18

12.4.2 Querying the Report of the GSM Cell Interference Matrix.............................................................12-19

12.4.3 Querying the Report of the GSM Cell Frequency Interference Matrix...........................................12-20

12.5 Querying the GSM Frequency Optimization Report................................................................................12-21

12.6 Exporting GSM Interference Analysis Reports........................................................................................12-24

12.7 Exporting GSM Frequency Optimization Reports....................................................................................12-25

12.8 Reference for the GSM Frequency Analysis GUI.....................................................................................12-26

12.8.1 Interface Description: GSM Frequency Analysis............................................................................12-26

12.8.2 Interface Description: GSM Frequency Optimization.....................................................................12-28


12.8.4 Parameters for Creating and Modifying GSM Frequency Analysis Tasks......................................12-36

12.8.5 Parameters for Querying the Overview Report of the GSM Test Cells...........................................12-37

12.8.6 Parameters for Querying the Report of GSM Cell Interference Matrix...........................................12-38

12.8.7 Parameters for Querying the Report of the GSM Cell Frequency Interference Matrix...................12-40

12.8.8 Parameters for Querying GSM Frequency Optimization Reports...................................................12-42

13 GSM Uplink Interference Analysis....................................................................................13-1

13.1 Basic Knowledge of GSM Uplink Interference Analysis...........................................................................13-2

13.2 Procedure for Using GSM Uplink Interference Analysis...........................................................................13-2

Contents

Nastar

Operator Guide

xii Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


15/1022

13.3 Managing GSM Uplink Interference Analysis Tasks.................................................................................13-4


13.3.2 Creating a GSM Uplink Interference Analysis Task..........................................................................13-9

13.3.3 Modifying a GSM Uplink Interference Analysis Task....................................................................13-11

13.3.4 Checking a GSM Uplink Interference Analysis Task......................................................................13-12

13.4 Querying a GSM Uplink Interference Analysis Report............................................................................13-13

13.5 Reference for the GSM Uplink Interference Analysis GUI......................................................................13-15

13.5.1 Interface Description: GSM Uplink Interference Analysis..............................................................13-15


13.5.3 Parameters for Creating and Modifying GSM Uplink Interference Analysis Tasks.......................13-22

13.5.4 Parameters for Querying the Uplink Interference Analysis Reports of GSM Cells........................13-23

14 GSM VIP Analysis.................................................................................................................14-1

14.1 Basic Knowledge of GSM VIP Analysis....................................................................................................14-2

14.2 GSM VIP Analysis Process.........................................................................................................................14-3

14.3 Managing GSM VIP Analysis Tasks..........................................................................................................14-5

14.3.1 Managing GSM VIP Groups..............................................................................................................14-6


14.3.3 Creating GSM VIP Analysis Tasks..................................................................................................14-14

14.3.4 Modifying GSM VIP Analysis Tasks..............................................................................................14-16

14.3.5 Checking GSM VIP Analysis Tasks................................................................................................14-16

14.4 Querying GSM VIP Analysis Reports......................................................................................................14-18

14.5 Exporting GSM VIP Analysis Reports.....................................................................................................14-20

14.6 Reference to the GSM VIP Analysis Interface.........................................................................................14-20

14.6.1 Parameters for Creating and Modifying GSM VIP Subscribers/VIP Groups..................................14-20


14.6.3 Parameters for Creating and Modifying GSM VIP Analysis Tasks................................................14-27

14.6.4 Parameters for Querying GSM VIP Analysis Reports.....................................................................14-30

15 GSM Complaint Analysis Support.....................................................................................15-1

15.1 Basic Knowledge of GSM Complaint Analysis Support............................................................................15-3

15.2 GSM Complaint Analysis Support Process................................................................................................15-4

15.3 Managing GSM Complaint Analysis Support Tasks..................................................................................15-5

15.3.1 Creating GSM Complaint Analysis Support Tasks............................................................................15-5

15.3.2 Modifying GSM Complaint Analysis Support Tasks........................................................................15-8

15.3.3 Checking GSM Complaint Analysis Support Tasks..........................................................................15-9

15.4 Querying GSM Complaint Analysis Support Reports..............................................................................15-10

15.5 Exporting GSM Complaint Analysis Support Reports.............................................................................15-11

15.6 Reference to the GSM Complaint Analysis Support Interface.................................................................15-12

15.6.1 Parameters for Creating and Modifying GSM Complaint Analysis Support Tasks........................15-12

15.6.2 Parameters for Querying GSM Complaint Analysis Support Reports.............................................15-13

16 GSM Cell Performance Analysis........................................................................................16-1

16.1 Basic Knowledge of GSM Cell Performance Analysis..............................................................................16-2

Nastar




xiii


16/1022

16.2 GSM Cell Performance Analysis Process ..................................................................................................16-2

16.3 Managing GSM Cell Performance Analysis Tasks.....................................................................................16-4


16.3.2 Creating GSM Cell Performance Analysis Tasks..............................................................................16-9

16.3.3 Modifying GSM Cell Performance Analysis Tasks.........................................................................16-11

16.3.4 Checking GSM Cell Performance Analysis Tasks..........................................................................16-12

16.4 Querying GSM Cell Performance Analysis Reports.................................................................................16-13

16.5 Exporting GSM Cell Performance Analysis Reports................................................................................16-15

16.6 Reference to the GSM Cell Performance Analysis Interface....................................................................16-16


16.6.2 Parameters for Creating or Modifying GSM Cell Performance Analysis Tasks.............................16-21

16.6.3 Parameters for Querying the GSM Cell Performance Analysis Report...........................................16-22

17 UMTS Centralized Task Management..............................................................................17-1

17.1 Basic Knowledge of UMTS Centralized Task Management......................................................................17-3

17.1.1 Types of Timing Tasks.......................................................................................................................17-3

17.1.2 System Timing Tasks.........................................................................................................................17-4

17.1.3 User Timing Task...............................................................................................................................17-4

17.1.4 Task Scheduling Parameters.............................................................................................................. 17-4

17.1.5 States of a Timing Task......................................................................................................................17-5

17.1.6 Customizing the Interface for Managing Timing Tasks.................................................................... 17-6

17.2 Creating a UMTS User-Defined Timing Task............................................................................................17-7

17.2.1 Creating a Task of Importing UMTS Uplink-Interference Data........................................................17-8

17.2.2 Creating a Task of Importing UMTS Neighboring-Cell Analysis Data..........................................17-10

17.2.3 Creating a Task of Importing UMTS/GSM Neighboring-Cell Analysis Data.................................17-13

17.2.4 Creating a Task of Importing UMTS Configuration Data...............................................................17-15

17.2.5 Creating a Task of Importing UMTS Coverage Analysis Data.......................................................17-18

17.2.6 Creating a Task of Importing UMTS VIP Analysis Data................................................................17-20

17.2.7 Creating a Task of Importing UMTS Pilot Pollution Analysis Data...............................................17-22

17.2.8 Creating a Task of Importing UMTS Cell Performance Analysis Data...........................................17-25

17.2.9 Creating a Task of Importing UMTS Engineering Parameters........................................................17-27

17.3 Modifying a UMTS User-Defined Timing Task.......................................................................................17-30

17.3.1 Modifying a Task of Importing UMTS Uplink Interference Data...................................................17-3017.3.2 Modifying a Task of Importing UMTS Neighboring-Cell Analysis Data.......................................17-31

17.3.3 Modifying a Task of Importing UMTS/GSM Neighboring-Cell Analysis Data.............................17-32

17.3.4 Modifying a Task of Importing UMTS Configuration Data............................................................17-32

17.3.5 Modifying a Task of Importing UMTS Coverage Analysis Data....................................................17-33

17.3.6 Modifying a UMTS VIP Analysis Data Import Task......................................................................17-34

17.3.7 Modifying a Task of Importing UMTS Pilot Pollution Analysis Data............................................17-34

17.3.8 Modifying a Task of Importing UMTS Cell Performance Analysis Data.......................................17-35

17.3.9 Modifying a Task of Importing UMTS Engineering Parameters.....................................................17-36

17.4 Modifying a UMTS Data Deletion Task...................................................................................................17-36

17.4.1 Modifying the Task of Deleting GSM History Data........................................................................17-37

Contents

Nastar

Operator Guide

xiv Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


17/1022

17.4.2 Modifying a Task of Deleting UMTS Uplink Interference Data.....................................................17-38

17.4.3 Modifying the Task of Deleting UMTS Neighboring-Cell Analysis Data......................................17-39

17.4.4 Modifying the Task of Deleting UMTS/GSM Neighboring-Cell Analysis Data............................17-39

17.4.5 Modifying the Task of Deleting UMTS Configuration Data...........................................................17-40

17.4.6 Modifying the Task of Deleting UMTS Coverage Analysis Data...................................................17-41

17.4.7 Modifying a Task of Deleting UMTS VIP Analysis Data...............................................................17-41

17.4.8 Modifying a Task of Deleting UMTS Pilot Pollution Analysis Data..............................................17-42

17.4.9 Modifying a Task of Deleting UMTS Cell Performance Analysis Data.........................................17-43

17.5 Modifying the Task of Backing Up Data..................................................................................................17-44

17.6 Setting the Suspend or Resume Time of a Timing Task...........................................................................17-44

17.7 Viewing Timing Tasks..............................................................................................................................17-45

17.7.1 Browsing the Information of Timing Tasks.....................................................................................17-45

17.7.2 Checking the Task Progress.............................................................................................................17-46

17.7.3 Checking the Task Execution...........................................................................................................17-46

17.8 Reference to the UMTS Centralized Task Management Interface...........................................................17-47

17.8.1 Interface Description: Centralized Task Management.....................................................................17-48

17.8.2 Parameter for Setting Task Filter Conditions...................................................................................17-50

17.8.3 Parameter for Setting Common Parameters for Timing Tasks........................................................17-51

17.8.4 Parameter for Setting the Time of a Common Periodic Task..........................................................17-52

17.8.5 Parameter for Setting the Time of a Common One-Time Task.......................................................17-53

17.8.6 Parameters for Modifying the Task of Deleting History Data.........................................................17-53

17.8.7 Parameters for Modifying the Task of Deleting UMTS Uplink Interference Data..........................17-54

17.8.8 Parameters for Modifying the Task of Deleting Neighboring UMTS Cell Analysis Data..............17-5517.8.9 Parameters for Modifying the Task of Deleting UMTS/GSM Neighboring-Cell Analysis Data....17-55

17.8.10 Parameters for Modifying the Task of Deleting UMTS Configuration Data.................................17-55

17.8.11 Parameters for Modifying the Task of Deleting UMTS Coverage Analysis Data.........................17-56

17.8.12 Parameters for Modifying the Task of Deleting UMTS VIP Analysis Data..................................17-56

17.8.13 Parameters for Modifying the Task of Deleting UMTS Pilot Pollution Analysis Data.................17-57

17.8.14 Parameters for Modifying the Task of Deleting UMTS Cell Performance Analysis Data............17-57

17.8.15 Parameters for Modifying the Task of Backing Up Data...............................................................17-58

17.8.16 Parameters for Setting the Time of a Timing Task........................................................................17-58

18 UMTS Uplink Interference Analysis.................................................................................18-118.1 Basic Knowledge of UMTS Uplink-Interference Analysis........................................................................18-3

18.2 Process of UMTS uplink interference Analysis..........................................................................................18-3

18.3 Managing UMTS Uplink Interference Analysis Tasks...............................................................................18-5

18.3.1 Creating UMTS E2E Tasks................................................................................................................18-5

18.3.2 Creating a UMTS Uplink Interference Analysis Task.......................................................................18-7

18.3.3 Modifying a UMTS Uplink-Interference Analysis Task...................................................................18-9

18.3.4 Checking a UMTS Uplink Interference Analysis Task....................................................................18-10

18.4 Querying a UMTS Uplink Interference Analysis Report..........................................................................18-11

18.5 Reference for the UMTS Uplink Interference Analysis GUI....................................................................18-13

18.5.1 Interface for UMTS Uplink Interference Analysis...........................................................................18-13

Nastar




xv


18/1022

18.5.2 Parameters for Creating UMTS E2E Tasks.....................................................................................18-14

18.5.3 Parameters for Creating or Modifying a UMTS Uplink Interference Analysis Task......................18-16

18.5.4 Parameters for Querying the Uplink Interference Analysis Reports of UMTS Cells......................18-17

19 UMTS Co-Frequency Neighboring Cell Analysis...........................................................19-119.1 Basic Knowledge of UMTS Co-Frequency Neighboring Cell Analysis.................................................... 19-3

19.1.1 UMTS Co-Frequency Neighboring Cell Analysis Function..............................................................19-3

19.1.2 UMTS Co-Frequency Neighboring Cell Analysis Algorithms..........................................................19-4

19.2 Process of UMTS Co-Frequency Neighboring Cell Analysis.................................................................... 19-5

19.3 Managing UMTS Neighboring Cell Analysis Tasks.................................................................................. 19-6


19.3.2 Creating a UMTS Co-Frequency Neighboring Cell Analysis Task...................................................19-9

19.3.3 Modifying a UMTS Co-Frequency Neighboring Cell Analysis Task.............................................19-11

19.3.4 Checking a UMTS Co-Frequency Neighboring Cell Analysis Task...............................................19-12

19.4 Querying a UMTS Co-Frequency Neighboring Cell Analysis Report.....................................................19-13

19.5 Exporting a UMTS Co-Frequency Neighboring Cell Analysis Report....................................................19-15

19.6 Reference for the UMTS Co-Frequency Neighboring Cell Analysis GUI...............................................19-17

19.6.1 Interface Description: UMTS Co-Frequency Neighboring-Cell Analysis.......................................19-17


19.6.3 Parameters for Creating and Modifying UMTS Co-Frequency Neighboring Cell Analysis Tasks

.....................................................................................................................................................................19-20

19.6.4 Parameters for Querying UMTS Co-Frequency Neighboring Cell Analysis Reports.....................19-21

20 NeighboringUMTS/GSM Cell Analysis...........................................................................20-1

20.1 Basic Knowledge of Neighboring UMTS/GSM Cell Analysis.................................................................. 20-3

20.1.1 Neighboring UMTS/GSM Cell Analysis...........................................................................................20-3

20.1.2 Algorithm for the Neighboring UMTS/GSM Cell Analysis..............................................................20-4

20.2 Process of Neighboring UMTS/GSM Cell Analysis...................................................................................20-5

20.3 Managing Neighboring UMTS/GSM Cell Analysis Tasks.........................................................................20-6


20.3.2 Creating a Neighboring UMTS/GSM Cell Analysis Task.................................................................20-9

20.3.3 Modifying Neighboring UMTS/GSM Cell Analysis Tasks.............................................................20-12

20.3.4 Querying Neighboring UMTS/GSM Cell Analysis Tasks...............................................................20-13

20.4 Querying Neighboring UMTS/GSM Cell Analysis Reports.....................................................................20-14

20.5 Querying Possible Neighboring UMTS/GSM Cell Analysis Reports......................................................20-16

20.6 Exporting Neighboring UMTS/GSM Cell Analysis Reports....................................................................20-17

20.7 Exporting Possible Neighboring UMTS/GSM Cell Analysis Reports.....................................................20-19

20.8 Reference to the Neighboring UMTS/GSM Cell Analysis Interface........................................................20-19


20.8.2 Parameters for Creating and Modifying Neighboring UMTS/GSM Cell Analysis Tasks...............20-21

20.8.3 Parameters for Querying the Analysis Reports of Neighboring UMTS/GSM Cells.......................20-23

20.8.4 Parameters for Querying the Analysis Reports of Possible Neighboring UMTS/GSM Cells.........20-25

21 UMTS Coverage Analysis....................................................................................................21-1

21.1 Basic Knowledge of UMTS Coverage Analysis.........................................................................................21-2

Contents

Nastar

Operator Guide

xvi Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


19/1022

21.2 Process of UMTS Coverage Analysis.........................................................................................................21-2

21.3 Managing a UMTS Coverage Analysis Task..............................................................................................21-4


21.3.2 Creating a UMTS Coverage Analysis Task.......................................................................................21-6

21.3.3 Modifying a UMTS Coverage Analysis Task....................................................................................21-8

21.3.4 Checking a UMTS Coverage Analysis Task......................................................................................21-9

21.4 Querying a UMTS Coverage Analysis Report..........................................................................................21-10

21.5 Exporting a UMTS Coverage Analysis Report.........................................................................................21-12

21.6 Reference for the UMTS Coverage Analysis GUI....................................................................................21-13

21.6.1 Interface for UMTS Coverage Analysis...........................................................................................21-13


21.6.3 Parameters for Creating and Modifying UMTS Coverage Analysis Tasks.....................................21-17

21.6.4 Parameters for Querying UMTS Coverage Analysis Reports..........................................................21-18

22 UMTS VIP Analysis..............................................................................................................22-1

22.1 Basic Knowledge of UMTS VIP Analysis..................................................................................................22-2

22.2 UMTS VIP Analysis Process......................................................................................................................22-3

22.3 Managing UMTS VIP Analysis Tasks........................................................................................................22-5

22.3.1 Managing UMTS VIP Groups...........................................................................................................22-6


22.3.3 Creating UMTS VIP Analysis Tasks...............................................................................................22-11

22.3.4 Modifying UMTS VIP Analysis Tasks............................................................................................22-13

22.3.5 Checking UMTS VIP Analysis Tasks..............................................................................................22-14

22.4 Querying UMTS VIP Analysis Reports....................................................................................................22-1522.5 Exporting UMTS VIP Analysis Reports...................................................................................................22-17

22.6 Reference to the UMTS VIP Analysis Interface.......................................................................................22-18

22.6.1 Interface Description: UMTS VIP Analysis....................................................................................22-18

22.6.2 Parameters for Creating and Modifying UMTS VIP Subscribers/VIP Groups...............................22-20


22.6.4 Parameters for Creating and Modifying UMTS VIP Analysis Tasks..............................................22-23

22.6.5 Parameters for Querying UMTS VIP Analysis Reports..................................................................22-25

23 UMTS Complaint Analysis Support..................................................................................23-1

23.1 Basic Knowledge of UMTS Complaint Analysis Support..........................................................................23-323.2 UMTS Complaint Analysis Support Process..............................................................................................23-4

23.3 Managing UMTS Complaint Analysis Support Tasks................................................................................23-5

23.3.1 Creating UMTS Complaint Analysis Support Tasks.........................................................................23-6

23.3.2 Modifying UMTS Complaint Analysis Support Tasks......................................................................23-8

23.3.3 Checking UMTS Complaint Analysis Support Tasks........................................................................23-9

23.4 Querying UMTS Complaint Analysis Support Reports............................................................................23-10

23.5 Exporting UMTS Complaint Analysis Support Reports...........................................................................23-12

23.6 Reference to the UMTS Complaint Analysis Support Interface...............................................................23-12

23.6.1 Parameters for Creating and Modifying UMTS Complaint Analysis Support Tasks......................23-13

23.6.2 Parameters for Querying UMTS Complaint Analysis Support Reports..........................................23-14

Nastar




xvii


20/1022

24 UMTS Pilot Pollution Analysis...........................................................................................24-1

24.1 Basic Knowledge of UMTS Pilot Pollution Analysis.................................................................................24-3

24.2 UMTS Pilot Pollution Analysis Process.....................................................................................................24-3

24.3 Managing UMTS Pilot Pollution Analysis Tasks.......................................................................................24-5


24.3.2 Creating UMTS Pilot Pollution Analysis Tasks................................................................................24-8

24.3.3 Modifying UMTS Pilot Pollution Analysis Tasks...........................................................................24-10

24.3.4 Checking UMTS Pilot Pollution Analysis Tasks.............................................................................24-10

24.4 Querying UMTS Pilot Pollution Analysis Reports...................................................................................24-12

24.5 Exporting UMTS Pilot Pollution Analysis Reports..................................................................................24-13

24.6 Reference to the UMTS Pilot Pollution Analysis Interface......................................................................24-13

24.6.1 Interface Description: UMTS Pilot Pollution Analysis....................................................................24-14


24.6.3 Parameters for Creating and Modifying UMTS Pilot Pollution Analysis Tasks.............................24-16

24.6.4 Parameters for Querying UMTS Pilot Pollution Analysis Reports..................................................24-17

25 UMTS Cell Performance Analysis......................................................................................25-1

25.1 Basic Knowledge of UMTS Cell Performance Analysis............................................................................25-2

25.2 UMTS Cell Performance Analysis Process................................................................................................25-6

25.3 Managing UMTS Cell Performance Analysis Tasks..................................................................................25-8


25.3.2 Creating UMTS Cell Performance Analysis Tasks..........................................................................25-11

25.3.3 Modifying UMTS Cell Performance Analysis Tasks......................................................................25-13

25.3.4 Checking UMTS Cell Performance Analysis Tasks........................................................................25-13

25.4 Querying UMTS Cell Performance Analysis Reports..............................................................................25-15

25.5 Exporting UMTS Cell Performance Analysis Reports.............................................................................25-16

25.6 Reference to the UMTS Cell Performance Analysis Interface.................................................................25-17


25.6.2 Parameters for Creating or Modifying UMTS Cell Performance Analysis Tasks...........................25-19

25.6.3 Parameters for Querying the UMTS Cell Performance Analysis Report........................................25-20

26 CDMA Centralized Task Management.............................................................................26-1

26.1 Basic Knowledge of CDMA Centralized Task Management.....................................................................26-3

26.1.1 Types of Timing Tasks.......................................................................................................................26-326.1.2 System Timing Tasks.........................................................................................................................26-4

26.1.3 User Timing Task...............................................................................................................................26-4

26.1.4 Task Scheduling Parameters..............................................................................................................26-4

26.1.5 States of a Timing Task......................................................................................................................26-5

26.1.6 Customizing the Interface for Managing Timing Tasks....................................................................26-6

26.2 Creating a CDMA User-Defined Timing Task...........................................................................................26-7

26.2.1 Creating a Task of Importing CDMA VIP KPI Analysis Data..........................................................26-8

26.2.2 Creating a Task of Importing CDMA Uplink-Interference-Ranking Analysis Data.......................26-10

26.2.3 Creating a Task of Importing the CDMA Uplink-Interference-Spectrum Analysis Data...............26-13

26.2.4 Creating a Task of Importing CDMA Neighboring-Cell Analysis Data..........................................26-15

Contents

Nastar

Operator Guide

xviii Huawei Proprietary and Confidential


Issue 03 (2010-06-30)


21/1022

26.2.5 Creating a Task of Importing CDMA Pilot Pollution Analysis Data..............................................26-18

26.2.6 Creating a Task of Importing CDMA Coverage Analysis Data......................................................26-20

26.2.7 Creating a Task of Importing CDMA Cell Performance Analysis Data..........................................26-22

26.2.8 Creating a Task of Importing CDMA VIP KPI Analysis Data........................................................26-25

26.2.9 Creating a Task of Importing CDMA Configuration Data..............................................................26-27

26.3 Modifying a CDMA User-Defined Timing Task......................................................................................26-29

26.3.1 Modifying a Task of Importing CDMA VIP KPI Analysis Data....................................................26-30

26.3.2 Modifying a Task of Importing CDMA Uplink-Interference-Ranking Analysis Data....................26-31

26.3.3 Modifying a Task of Importing CDMA Uplink-Interference-Spectrum Analysis Data..................26-32

26.3.4 Modifying a Task of Importing CDMA Neighboring Cell Analysis Data......................................26-32

26.3.5 Modifying a Task of Importing CDMA Pilot Pollution Analysis Data...........................................26-33

26.3.6 Modifying a Task of Importing CDMA Coverage Analysis Data...................................................26-34

26.3.7 Modifying a Task of Importing CDMA Cell Performance Analysis Data......................................26-34

26.3.8 Modifying a Task of Deleting CDMA VIP KPI Analysis Data.......................................................26-35

26.3.9 Modifying a Task of Importing CDMA Configuration Data........

nastar operator guide-(v600r008_03)

Documents