8 0 4 0 2 / 2

Nano-programmable controllersNano-programmable controllers

References

Non-extendable Nano PLC bases

These bases cannot be fitted with any extensions. They incorporate extensive communication facilities: Uni-Telwaymaster/slave link or ASCII transmit/receive link.The a 24 V/150 mA sensor supply is not protectedNumber Inputs Relay Transistor outputs Reference Weightof I/O outputs 24 V/0.5 A (1) kg

Supply ccccc 100…240 V

14 8 a 24 V 6 – TSX 07 3L 1428 0.320

20 12 a 24 V 8 – TSX 07 3L 2028 0.340

Extendable Nano PLC bases

These Nano-programmable controller bases can be used as PLC bases (1 per configuration), as I/O extensions (max.1 per configuration) or as PLC extensions (max. 3 per configuration). They incorporate extensive communication facilities:Uni-Telway master/slave link or ASCII transmit/receive link and Modbus Slave link.Number Inputs Relay Transistor outputs Reference Weightof I/O outputs 24 V/0.5 A (1) kg

Supply aaaaa 24 V

10 6 a 24 V 4 – TSX 07 30 1022 0.290

– 4 protected, TSX 07 30 1012 0.270positive logic

4 non protected, TSX 07 30 1002 0.270negative logic

16 9 a 24 V 7 – TSX 07 31 1622 0.350

– 7 protected, TSX 07 31 1612 0.325positive logic

7 non protected, TSX 07 31 1602 0.325negative logic

24 14 a 24 V 10 – TSX 07 31 2422 0.400

– 10 protected, TSX 07 31 2412 0.370positive logic

10 non protected, TSX 07 31 2402 0.370negative logic

(1) A multilingual quick-reference guide (French, English, German, Italian and Spanish) is supplied as standard.

TSX 07 3L 1428

TSX 07 3L 2028

TSX 07 iiiii0 10ii

TSX 07 iiiii1 16ii

TSX 07 iiiii1 24ii

8 0 4 0 2 / 3

Nano-programmable controllersNano-programmable controllers

References

Extendable Nano PLC bases (continued)

Number Inputs Relay Transistor outputs Reference Weightof I/O outputs 24 V/0.5 A (1) kg

Supply ccccc 100…240 V

10 6 a 24 V 4 – TSX 07 30 1028 0.300

– 4 non protected, TSX 07 30 1008 0.280negative logic

16 9 c 115 V 7 – TSX 07 31 1648 0.390

9 a 24 V 7 – TSX 07 31 1628 0.360

– 7 non protected, TSX 07 31 1608 0.335negative logic

24 14 a 24 V 10 – TSX 07 31 2428 0.410

– 10 non protected, TSX 07 31 2408 0.380negative logic

Nano PLC bases (with one integrated analogue input) (2)

Supply ccccc 100…240 VNumber Inputs Relay Integrated Reference Weightof I/O outputs analogue input (1) kg

10 6 a 24 V 4 1 0…10 V TSX 07 32 1028 0.290

16 9 a 24 V 7 1 0…10 V TSX 07 33 1628 0.290

24 14 a 24 V 10 1 0…10 V TSX 07 33 2428 0.290

Nano PLC extensions

These extensions allow low cost extension of extendable Nano PLC bases (max. 1 extension per base)

Number Inputs Relay Transistor outputs Reference Weightof I/O outputs 24 V/0.5 A (1) kg

Supply aaaaa 24 V

16 9 a 24 V – 7 protected, TSX 07 EX 1612 0.325positive logic

24 14 a 24 V – 10 protected, TSX 07 EX 2412 0.370positive logic

Supply ccccc 100…240 V

16 9 a 24 V 7 – TSX 07 EX 1628 0.360

24 14 a 24 V 10 – TSX 07 EX 2428 0.410

(1) A multilingual quick-reference guide (French, English, German, Italian and Spanish) is supplied as standard.(2) TSX 07 32/33 ii28 PLCs do not have a link for I/O extensions and/or for PLC extensions or for the Modbus Slave link.

TSX 07 33 1628

TSX 07 EX 16ii

TSX 07 EX 24ii

TSX 07 iiiii1 16ii

TSX 07 iiiii1 24ii/TSX 07 21 1648

8 0 4 0 2 / 4

Nano-programmable controllersNano-programmable controllers

References

Spare parts

Description Application Length Reference Weightkg

Program Simplifies duplication, updating 0.3 m TSX PRG LDR 0.150loader or backing up of applicationswith terminal port (program and constants inconnecting cable internal RAM)

Input Nano PLC with 10 I/O – TSX 07 SIM 06 0.050simulatorsa 24/c 115 V

Nano PLC with 16 I/O – TSX 07 SIM 09 0.070

Nano PLC with 24 I/O – TSX 07 SIM 14 0.080

Connecting cables I/O extension 0.3 m TSX CA0 003 0.015betweenNano PLC bases

PLC extension 50 m TSX STC 050 1.710

200 m TSX STC 200 6.790

Connecting cable For connecting Nano PLC 2.5 m TSX PCX 1130 0.240for Modem link terminal port to Modem(DCE) equipment (with SUB-D

25-pin male connector)

Terminal port Isolation of Uni-Telway 1 m TSX P ACC 01 0.690cable signals for length > 10 mconnector and < 1 km, line termination,

bus cable tap link

Description Composition Reference Weightkg

Self-training 1 Nano PLC (16 I/O), TSX SDC 07 30 117 0.950cases 1 input simulator and 1 FTX 117(1)

1 Nano PLC (16 I/O), TSX SDC 07 30 DSF 0.6001 input simulatorand software running under DOSfor FT 2000/FTX 517

1 Nano PLC (16 inputs/outputs), TSX SDC 07 30 DSP 0.6001 input simulator and software runningunder DOS for PC compatible

(1) A multilingual quick-reference guide (French, English, German, Italian and Spanish) is supplied as standard.

TSX P ACC 01

TSX PRG LDR

8 0 4 0 2 / 5

Nano-programmable controllersAnalogue I/O modules

References

Analogue I/O extension modules

Up to 3 modules can be used to extend the Nano PLC base. They communicate with the base PLC by exchange words.

Type Number Voltage/current Supply Reference Weightof I/O of channels ranges (1) kg

High level 3 channels 0…10 V, ± 10 V c 100/240 V TSX AMN 4000 0.280inputs 0…20 mA, 4-20 mA12 bits

Isolated high 1 channel 0…10 V, ± 10 Vlevel output 0…20 mA, 4-20 mA11 bits

a 24 V TSX AMN 4001 0.270

Analogue I/O modules

Analogue input modules (2)Type Number Nature Input Reference Weight

of channels range (3) kg

High level 1 channel Voltage 0-10 V TSX AEN 101 0.12010/12 bits

± 10 V TSX AEN 105 0.120

Current 4-20 mA TSX AEN 102 0.120

Analogue output modules (4)Type Number Nature Output Reference Weight

of channels range (3) kg

High level 1 channel Voltage 0-10 V TSX ASN 101 0.1208 bits

± 10 V TSX ASN 105 0.120

Current 4-20 mA TSX ASN 102 0.120

(1) Product delivered with multilingual instruction book.(2) The Nano PLC must be equipped with a 24 V inputs. Uses Nano PLC input IO.O.(3) A multilingual instruction book (French, English, German, Italian and Spanish) is supplied as standard.(4) The Nano PLC must be equipped with 24 V transistor outputs. Uses Nano PLC input QO.O.

TSX AMN 400i

TSX AEN 10i

TSX ASN 10i

80402 /6

Nano-programmable controllersTerminals FTX 117

References

Terminals FTX 117

Terminals FTX 117 (with 4-line, back-lit LCD screen)Application Manual TLX Connecting cable to Reference Weight

DM 07 117F Nano PLC: T FTX CB1 020 (1) kg

Programming/ Not supplied Not supplied T FTX 117 0 0.300adjustmentof Nano PLCs (2)

Supplied T FTAND117 071 0.400

Supplied Supplied T FTX 117 071E 0.665

Spare partsDescription Length For use with Reference Weight

kg

ccccc / a a a a a adaptors – Mains adaptor c 110/120 V T FTX ADC 11 0.260for terminal FTX 117

Mains adaptor c 200/240 V T FTX ADC 12 0.260

Connecting 2 m FTX 117<-> Nano PLC T FTX CB1 020 0.100cables

5 m FTX 117<-> Nano PLC T FTX CB1 050 0.190

PCMCIA type 1 – EEPROM 32 K word type T FTX REM 3216 0.025memory cards

Battery-backed RAM 32 K word type T FTX RSM 3216 0.03

Battery-backed RAM 128 K word type T FTX RSM 12816 0.030

Battery – For PCMCIA TSX BAT M01 0.010RAM type memory card

(1) An E at the end of the reference indicates that the product is delivered with documentation in English.(2) FTX 117 Adjust terminal, see page 80403/2.

T FTX REM 3216

T FTX 117 0iii

8 0 4 0 2 / 7

Nano-programmable controllersPL7-07 software

References

PL7-07 software packages running under DOS (Windows 95 and Windows NT compatible)

Software packages designed for FT 2000/FTX 517 terminals or PC compatibles (with minimum of 386 processor, 4 Mbof RAM and DOS 3.3 operating system) for programming and debugging of Nano PLCs using PL7 language.

Description For Composition Reference Weightuse on (1) kg

Software packages Terminals 2 x 3"1/2 diskettes, TLX L PL7 07P 30E 0.440running under DOS FT 2000, 1 cable TSX PCU 1030,List/Reversible PC 1 setting-up manualLadder language compatibles

Terminal 2 x 3"1/2 diskettes, TLX L PL7 07F 30E 0.440FTX 517 1 cable T FTX CB F 020.

1 setting-up manual

Spare partsDescription Length Application Reference Weight

kg

Connecting 2.5 m Connection between Nano PLC TSX PCU 1030 0.140cable and FT 2000/PC compatible

(SUB-D 9-pin connector)

2 m Connection between Nano PLC T FTX CB F 020 0.120and FTX 517(SUB-D 9-pin connector)

(1) An E at the end of the reference indicates that the product is delivered with documentation in English.

TLX L PL7 07i 30F