nadezda volkova src control and diagnostic houston, usa, april 2014
DESCRIPTION
Issues of recognizing of tests results, certifications and inspections in the conformity assessment systems of US, Europe, the Russian Federation. Nadezda Volkova SRC Control and diagnostic Houston, USA, April 2014. TECHNICAL REGULATION. Accreditation. Standardization. Market surveillance. - PowerPoint PPT PresentationTRANSCRIPT
Nadezda VolkovaSRC Control and diagnostic
Houston, USA, April 2014
Issues of recognizing of tests results, certifications and inspections in the
conformity assessment systems of US, Europe, the Russian Federation
1
Main elements of technical regulation system
• TECHNICAL TECHNICAL REGULATIONREGULATION
• Accreditation
• Standardization
• Market surveillance
• Assessment (confirmation) of
conformity
• Technical regulations
• Determination of liability
• Assurance of uniformity of
measurements
Accreditation bodies system in EU
EU member stateEU member
states …
National accreditation bodyNational accreditation body
Independent bodies for conformity assessment
Certification bodies (Products, Quality management –ISO 17021,
Stuff - ISO 17024)
Inspection body(ISO 17020)
Testing laboratory(ISO 17025)
Russian conformity assessment bodies accredited in the ЕА
Testing laboratories (ISO 17025):• Germany (DAKKS) – 15;
Inspection bodies (ISO 17020):• Great Britain (UKAS) – 2;• Nederland ( ) – 1;
Bodies for stuff attestation (ISO 17024):• Germany (DAKKS) – 2;• Great Britain (UKAS) – 1;
Bodies for quality management certification (ISO 17021)• More then 20
Possibility for Russian bodies for conformity assessment within European Directives
Participation way:
- Russian accreditation body according to ISO/IEC 17000 series must be recognized by national accreditation body of state member of EA agreement;
- Recognition ( notification) by corresponding notified body of EU member state;
- Notified Russian body make the conformity assessment procedures
- Notified body make and publish the certificate according to settled rules
Conformity assessment procedures (Notification)
Participation way:
ISO/IEC 17025- EC, US –Proficiency Tests, - RF –accreditations
ISO/IEC 17024
-NDT: EC, US - ISO/EN 9712, RF – Rostehnadzor Rule
-Welding: EC, US – Standards IIW, RF – Rostehnadzor Rule
ISO/IEC 17020- EC, US – accreditations, - RF – construction control certificats (SRO)
Example of bodies for third countries stuff assessment in conformity
assessment according to European Directives
Great Britain
PED/19 - Arrangements for the BINDT Approval of NDT personnel certificated by other Certification Bodies
The British Institute of NDT,
which is a Recognised Third Party Organisation
is described within the European Pressure Equipment Directive (97/23/EC) at Article 13.
has entered into agreements to ‘Approve’
NDT personnel certificated
against EN ISO 9712 criteria for the testing
of permanent joints in pressure equipment
by the following certification bodies:
• Australian Institute for NDT Web: http://www.aindt.com.au/certification/certification-forms-guide.html
• Brazilian Association for NDT (ABENDE) Web: http://www.abende.org.br
• JSNDI (Japan) Web: http://www.jsndi.jp• Natural Resources (Canada) Web:
http://ndt.nrcan.gc.ca• RTC Testing and Diagnostics (Russia) Web:
http://www.ndt-rus.ru/en/certification.html• PROMBEZPEKA (Ukraine) Web:
http://www.osp.kiev.ua
DisciplineCode
KnowledgeRequired
Certifications / Qualifications
Preferred Certifications/ Qualifications
Comments
Vessels ASMEV ASME VIII ASME IXNACE
Certified Welding Inspector per one of the following:
СWI (Certified Welding Inspector- (AWS))- US
CSWIP (Certification System of Welding Inspection Personnel)-GB CWB NDE Level II as: Radiographic film interpreter (RTFI)-Canada
NDE Level II:MTPTUTRTVT API 510; 570; 653; or BPV Authorized inspector welder's qualification
Same as for 'Structural/Welding' above.Certification/qualifications body according IIW Rules and required .
Discipline Code Knowledge
Required Certifications / Qualifications
Preferred Certifications/ Qualifications
Comments
Process & PowerPiping/ Welding/ Static Equipment
ASMEV ASME VIII ASME IX ASME B31.1 ASME B31.3 ASME B31.4 ASME B31.8 NACE
Certified Welding Inspector per one of the following:
СWI (Certified Welding Inspector- (AWS))- US
CSWIP (Certification System of Welding Inspection Personnel)-GB
CWB NDE Level II as: Radiographic film interpreter (RTFI)-Canada
NDE Level II:MTPTUTRTVT API 510; 570; or 653 welder's qualification
Same as for 'Structural/Welding' above.Certification/qualifications body according IIW Rules and required ove..
:
Categories of welding stuff
International welding engineer IWE;
International welding technologist IWТ;
International welding specialist IWS;
International welding inspector IWIP
Сonformity assessment system in USA ?
ASME, SAEASME
API, AWS
Exempl:Boiler/Vessel;
Piping
ISO, IEC, e.c.ASTM
ProfessionalEngineering
standards andregulation
API, AWS
API, ACI,AWS
ANSI
Accreditation
Сonformity assessment system in RF ?
State Inspection
body
ProfessionalNPOs (SRO)
API, AWS
Exempl:Boiler/Vessel;
Piping
ISO, IEC, e.c.Ros
Accreditation(ISO series
17000)
Regulation and Rules
FNP, PB
Ministry , Regulation Body
Rosstandart
Regulation,Rules
SRO Standards
Exempl:Boiler/Vessel;
Piping
Rostehnadzor