multipass fuel filter test rig
TRANSCRIPT
FECR
World Class Testing EquipmentsAn ISO 9001 Certified Co.
Catalogue - Multipass Fuel Filter Test Rig
As per ISO 19438
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990E-mail - [email protected]/ [email protected] Website - www.fecproduct.com
Filter Test Rig ISO 19438 (Using On - Line Dust Particle Counter) up stream and down stream (Two Loop - Optional)
Multi Pass Test Standard (ISO 19438)The multi pass test stand is mainly used for testing the performance of Fuel filters according to ISO 19438 standards. These standards describe a method for determining the contaminant capacity, particle removal and differential pressure characteristics of filter elements.
This test stand is automatically test report generated through software controlled by a computer chart and all the test parameters can be display on the screen. Data handling and generation of reports according to the standards mentioned above are included.
In order to determine such characteristics, filter elements are injected with contaminant (test dust), whereas online particle sensors measure the contamination, thus making the evaluation of the filter element’s performance possible
Multipass Filter Test Rig
Data Sheet (example)Flow range 0.5 to 10 LPM, 3 to 30 LPM l/minDifferential pressure 10 barMaximal system 10 barHydraulic fluid Ml LH 5606 or similarDosing pump 100 - 250 ml/minParticle counter online particle counter (Pamas Germany)
4pm (c) calibrated per ISO 11171 optional 1,5 - 20 pm
Test tank 60Dosing tank 50Test head for 200 cm (max 16 bar) - (Optional)