multilink’s installation & construction catalog

Multilink’s Installation & Construction Catalog2

Multilink’s Installation & Construction Catalog 3

PATENTS & INNOVATIONS2007

First Web Video Installation Training For Fusion Splicing TrainingFirst Web Video Installation Instruction Training For Power Supply

FTTx Fiber Optic Slack Storage EnclosureFTTx Overlay Molding For Existing Molding

FTTx Exterior Fiber Optic Slack Storage Enclosure2005

Drop Fiber Sno-Shoe - Pat# D450,042SMulitpath Pavement Duct System

5 Amp Min. Stand By Power SupplyDirect Core CoolingOpen Face Molding

2004Compression Seal Technology Dome Enclosure

Tech Bag For Handling Converters2002

Communication Cable Clip - Pat# 6,378,814 B12001

Battery Power Supply Source Of Uninterruptible Power Supply - Pat# 6,268,665 B12000

Release Of 1st Airflow Power Supply Cabinet - Pat# 6,932443 B11999

Patented The 1st UPS With Polarity Of Inverters CCP Tech - Pat# 5,994,7931998

Fiber Optic Splice Case - Pat# 5,732,1801997

First Cable Identification Tag - Pat# 387,8111993

Patented And Trademarked First Plastic Sno-Shoe - Pat# 5,408,571Architectural Cove Molding For Housing Cable Wires - Pat# D332,941

1992Patented First Low Cost Torque Wrench - Pat# 5,152,200

1991Patented Coring And Stripping Tool For Dielectric Cable - Pat# 5,023,995


TABLE OF CONTENTS

Patents & Innovations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3SECTION 1: MDU Enclosures/Installation MDU Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MDU Tools/Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 SECTION 2: Cable Markers Cable Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 SECTION 3: Image Building Products Digital Converter Totes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 SECTION 4: Maintenance Tools Prep Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 SECTION 5: Plastic Demarcation Enclosures Plastic Demarcation Enclosures . . . . . . . . . . . . . . . . . . . . . . . . 39 SECTION 6: Security Seals & Drop Installation Hardware Security Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Drop Installation Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Splice Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 SECTION 7: Plastic & Steel Installation Products Point-of-Purchase Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Multichannel Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Wave Cove Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Latch Duct Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Plastic Raceway Fittings & Accessories . . . . . . . . . . . . . . . . . 78 Steel Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 SECTION 8: Plastic & Steel Installation Products For Fiber Optic Cable Steel Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Cove Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Square Latch Duct Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Square Plastic Molding Exterior Grade Molding . . . . . . . . 102 Overlay Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Single Fiber Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Accessories for Plastic Moldings . . . . . . . . . . . . . . . . . . . . . . . 106 Downspout Exterior Grade Molding . . . . . . . . . . . . . . . . . . . 108


We have the facility that can cater to all of our

customer’s special needs and requirements

Capable of quick,custom service,

for all yourmanufacturing

needs

Our fabricating and warehouse facilities can handle any size order no matter how big or small, including blanket orders and special releases

FULL SERVICE SHEET METAL FABRICATION


News Release - 9/1/07

Stat Trak™ IP Accessible Lock System For MDU Enclosures, Pedestals And Remote Cabinets

Roll out #1 – MDU box electronic locking system. Multilink has been approached by system plant operators who are interested in controlling access to their MDU enclo-sures. The basic premise is to minimize cable theft and vandalism of the equipment inside of these enclosures. Addition-ally the system plant operators would like to monitor the status of the enclosure and log who enters these enclosures and when. The system plant operator prefers to be able to use existing employee ID badges for controlled entry into these enclosures.

How it Works: The basic system would be a keypad alarm with monitoring and data logging. This system would be comprised of an electronic keypad, enclosure door sensors, Stat Trak™ system, (note: the Stat Trak™ unit requires any standard Cable Modem to operate), a siren and/or buzzer and a power supply. The keypad would have an access door to shield it from harsh environmental conditions and to minimize being obvious of its presence.

System Option Description: Option 1: The basic system would be capable of having an electronic/mechanical locking device for added security. Option 2: The basic system would be capable of having a backup power system added for full functionality during power outages. This would require the additional components of a battery and a charging circuit. The amount of back up power time available would be dependent on the battery size.

Normal Operation: The system would work by responding to the opening of the keypad door. At that point a timer would start and a buzzer would sound until the correct access code is entered into the keypad. Upon entering the correct code into the keypad, the buzzer would stop and the Stat Trak™ system would send a message that the alarm has been deactivated by code number “xyz” along with a time stamp and location ID. After authorized access the system would automatically re-arm five minutes after the doors are closed or immediately after the correct access code is entered into the keypad.

Alarm Condition Operation: The system would work by responding to the opening of the keypad door. At that point a twenty second timer would start and a buzzer would sound for ninety seconds. The Stat Trak™ unit would send a minor alarm message after twenty seconds of the keypad door being open and no keypad entry, indicating a keypad door tamper alarm. If the incorrect keypad code is entered three times a keypad tamper alarm would be generated and all keypad entry activity would be ignored for the next ten minutes and the buzzer would sound for five minutes. If the main door of the enclosure is opened without deactivating the system via the keypad, an instant alarm would sound and a major alarm would be generated via the Stat Trak™ system. This major alarm condition could utilize a separate (louder) alarm siren or the same buzzer as the keypad. This major alarm condition would sound the siren or buzzer for ten minutes.

Powering Needs: 1) An active 2-way RF drop2) An authorized Cable Modem 3) An active AC power outlet, rated for fifteen amps at one hundred and twenty volts

For more details about Stat Trak™ IP accessible Lock Systems please email [email protected]

Round (Conduit) Knockouts

A 1-3/8” x 2-15/32”

B 7/8” x 1-1/8” x 1-3/4”

C 7/8” x 1-1/8” x 1-3/8” x 1-3/4”

D 1-3/8” x 1-31/32” x 2-15/32”

•

•

•

•

PVC Riser Guard Knockouts

1.624” x 2.125”

2.156” x 2.625”

2.656” x 3.125”

•

•

•

Trapezoid Knockouts

SR075

SR100

SR200

•

•

•

CONDUIT/KNOCKOUT MATCHING GUIDE

CONDUIT SIZE ACTUAL OD RECOMMENDED KNOCKOUT SIZE

1/2” 840 7/8”

3/4” 1.060 1-1/8”

1” 1.315 1-3/8”

1-1/4” 1.660 1-11/16”

1-1/2” 1.900 1-31/32”

2” 2.375 2-15/32”

2-1/2” 2.875 2-15/16”

3” 3.5 3-19/32”

Multilink’s Installation & Construction Catalog

SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

8

MDU ENCLOSURERS

BOX STYLE HINGE BOX SIZE NUMBEROF LOCKS

TYPEOF LOCK

KNOCKOUTS BOX COLOR OPTIONS SIZE MATERIAL

FOR RNBB STYLE BOXES ONLY

H - HINGE SYSTEMSH - SUPER-HINGE SYSTEM ( LEAVE THIS BLANK IF THERE ARE NO HINGE SYSTEM DESIRED )

HOW MANY LOCKSINSTALLED IN BOX ?

PG - PROTEC GRAYBE - BEIGEBR - BRICK REDOW - OFF WHITEXX - OTHER ( SPECIFY ON OPTION PAGE )

S - STANDARD KNOCK-OUTSC - CUSTOM KNOCK-OUTS ( IF CUSTOM SPECIFY ON OPTION PAGE )

WIDTH x HEIGHT x DEPTHDIMENSIONS OF BOX

RNH - ROUGHNECK HINGEDRNB - ROUGHNECK BASICRNBB - ROUGHNECK BOX-IN-BOXRNHL - ROUGHNECK HANGING-LIDM1 - ROUGHNECK ULTRA SERIESRTP - ROUGHNECK TOM PED

SL - SUPRAPL - PLUGIL - INNERTITEMX - MXML - MASTERAL - ACEDV - DIVERSIFIEDHA - HASPXX - OTHER ( SPECIFY ) SEE OPTIONS PAGE FOR LOCK # IF APPLICABLE

N - NOY - YES ( SPECIFY )

A - ALUMINUMS - STEEL ( SPECIFY )

I.D. #


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

9

MDU ENCLOSURESOptions Page

TOP

FRONT

BOTTOM

LEFT SIDE RIGHT SIDE

BACK

BOX I.D. #

LOCK OPTIONS

TYPE OF LOCK

LOCK #

SHOULD WAREHOUSE SEND KEYS ?YES NO

SHOULD THE LOCK BE INSTALLED ?YES NO

* LIST ANY SPECIAL LOCK INSTRUCTIONS BELOW:

SHIPPING INSTRUCTIONSBUBBLE WRAP

INDIVIDUAL BOX

BULK

NOTES

KNOCKOUTS

TYPE OF KNOCKOUT:

A

B

C

D

J

P

T

R0250

R0500

R0562

R0630

R1000

R2000

R3000

R4000

*PLEASE SEE ATTACHED PAGE FOR THE LOCATIONSAND TYPE OF KNOCKOUTS FOR THIS BOX

2 STAGE: 1.375” x 2.46875”

2 STAGE: 1.375” x 2.25”

2 STAGE: .875” x 1.125” x 1.375” x 1.75”

3 STAGE: 1.375” x 1.96875” x 2. 46875”

“J” STYLE

PVC

TRAPAZOID

ROUND .250

ROUND .500

ROUND .562

ROUND .630

ROUND 1.000

ROUND 2.000

ROUND 3.000

ROUND 4.000

OPTIONAL ACCESSORIESPLEASE CIRCLEOPTIONS: INSTALL:

D-MARK DROP STANDRMD-12RMD-18RMD-24

STAR PLATERNX-5101RNX-9141RNX-15171

SCREEN PLATERGSB-12RGSB-18RGSB-20RGSB-24

D-MARKOXBOARDPLYWOODGROUND LUGTAP BRACKETRNRC-10060078-DRY LIDSPECIAL PLATEOTHER


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

10

MDU ENCLOSURERSTom Ped Double Box Pedestal High Security Protection

Tom Ped is the answer to these types of MDU problems.

• INCREASED SECURITY• DECREASED COST• CLEANER INSTALLATIONApplicationThe only hybrid high security box-in-box and pedestal enclosure. Designed for broadband multimedia systems. This concept offers two levels of high security against illegal hook-ups, and keeps your cable well managed. Can be firmly bolted to the wall or staked to the ground. Features & Benefits • Box-in-box design. • Can be keyed to match any manufacturer’s locking system • Built to last with high-grade construction materials • 100% fusion welded construction for greater durability and quality control of welds • Textured steel holds paint better. • UL 50 standard outdoor box rating • Gray baked-on polyester powder coating • Scratch and salt spray tested • ASTM rating

Star mounting plate for equipment installation

Drop and trap organization

Active subscriber drops

Tamper proof screws available

STOPS ILLEGALSIn the unlikely case that the cover

is ever forced off, there still remains a second line of defense. An illegal

hook-up is prevented because all un-connected drops are still hidden and

protected in the lower inner box!

Available in Steelor Aluminum


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

11

MDU ENCLOSURESTom Ped Double Box Pedestal High Security Protection

Features & Benefits • Now available in depths of 10” and 15” • Available in Aluminum or Steel• Available with Star Slam Lock

Item Part# Description Dimensions UOM

A - RTP-4216 Standard Tom Ped 42”H x 16”W x 8”D Each

B - RTP-1548 Standard Tom Ped 40”H x 15”W x 8”D Each

C - RTP-1834 Standard Tom Ped 36”H x 12”W x 8”D Each

D - RTP-8032 Standard Tom Ped 32”H x 8”W x 8”D Each

- 12824 BS-24 Pedestal Stake For Tom Ped Double Box Pedestal 24” Each



- 12833 RN-TPTB Tom Ped Tap Bracket - Each

Stock codes vary depending on options such as locks and other accessories Please call Customer Service for custom sizes, configurations, and lock specifications

A

B C

D

RTP-15408Hinged door series includes 3 heavy duty slip hinges for maintenance ease. Above box features a tamper-proof screw slam lock.

RTP-1548Box-in-Box style RTP with cut away sides and adjustable star and D-Mark plate. Features tamper-proof screw slam lock.

Van LockThis particular box features a Van Lock Plug Lock with customized placement.

RTP-36115“Box-in-Box” style pedestal with full sides. Box includes D-Mark plate with two mounting options. Also available with star plate and various locking options. Please call Customer Service for more information.


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

12

MDU ENCLOSURERSTom Ped Double Box Pedestal High Security Protection


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

13

MDU ENCLOSURERSFlush Mount Pre-Wire Box For New and Post Construction Applications

Applications Make pre-wiring jobs easier with the RNSB-69 Pre-Wire box from Multilink. It’s designed for use in common junction locations for pre-wiring in new and post construction applications. It mounts easily to the stud and is adjustable to any size drywall.

Features & Benefits• Comes complete with mounting hardware • Can be used in both new and post-construction applications• Mounts easily to stud and is adjustable to accommodate all sizes of drywall• Two knockouts on both top and bottom• Cover is coated with durable white powder coating• Custom logos and imprints are available

Part# Description Dimensions UOM

10799K RNSB-69 Flush Mount Pre-wire Box 9-1/2”H x 6-1/2”W x 3-3/4”D Each

11568K RNSB-1214 Flush Mount Pre-wire Box ( Non-standard Item ) 12”H x 14”W x 3”D Each

All stock codes listed are for standard options only Please call Customer Service for custom sizes, configurations, and lock specifications


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

14

MDU ENCLOSURERSM1™ Ultra Series

Step up to a new level in high security steel enclo-sures with the M1™ ultra high security MDU steel enclosure.

Applications The heavy duty box-in-box design combined with the unique hardened steel security bar closure as-sembly makes the M1™ as tough as a tank!

Features & Benefits The M1™ Ultra Series is constructed with the cover robotically seam welded, a feature not offered by any other steel enclosure manufacturer in the Cable TV industry! The key to the higher level of security offered by the M1™ Ultra Series box is in the 7/8” di-ameter steel Ultra Bar which runs through the steel inner bottom and cover of the box and features a ½” shackle hole ready to accept practically any high security padlock. With so many features packed into a single steel enclosure it is easy to see why the new M1™ Ultra Series box is the ultimate in high security steel enclosures!

Part # Description Dimensions UOM

Varies W/ Options M1-12128 M1 Ultra Series Mdu Enclosure 2 Standard Knockouts On Bottom & Back 12”W x 12”H x 8”D Each




10-5476 M1-12 Hardened Steel Security Bar 12” Each



12575 7700aa275 Heavy Duty Block Lock .875” Shackle Each

12709k Roughneck Lid Retaining Cable With 1 Hook - Each

12712k Roughneck Lid Retaining Cable With 2 Hooks - Each

Stock codes vary depending on options such as locks and other accessoriesPlease call Customer Service for custom sizes, configurations, and lock specifications


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

15

MDU ENCLOSURERSRNBB Box-in-Box High Security Series Enclosure Options

Features & Benefits • High security bearing sleeve at locking point • Gray baked on powder coating; UL standards outdoor box rating, high corrosion resistance • Full back with multiple entry knockout • Key style mounting holes for easy installation • Drain holes to keep moisture out • Available with Star Slam Lock• MX and DX locking keyways available • Available in steel or aluminum • If aluminum is desired, add an A to the end of the part number

RNBB Closed Shown with Standard Hinge OptionShown with Super Heavy DutyHinge Option

Removable Back Panel

RearMultistageKnockouts

Lock Pin ThatAutomatically

Engages When Box Is Closed

Super Hinge

Mouse Hole KnockoutsFor Multistage Cable

And Back Plate Options


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

16

MDU ENCLOSURERSRNBB Box-in-Box High Security Series Enclosures

All boxes listed below come with standard “A” size knockouts: 2 Bottom / 2 Back / 2 Top.

Star Slam Lock Option shown here

Star Slam Lock Option shown again herein another box


Varies W/ Options RNBB-12128 Box-In-Box High Security Enclosure 12”w X 12”h X 8”d Each




Varies W/ Options RNBBH-12128 Box-In-Box High Security Enclosure With Standard Hinge Option 12”w X 12”h X 8”d Each




Varies W/ Options RNBBSH-12128 Box-In-Box High Security Enclosure With Heavy Duty Super Hinge Option 12”w X 12”h X 8”d Each




Stock codes vary depending on options such as locks and other accessories Please call Customer Service for custom sizes, configurations, and lock specifications All boxes listed below come with standard “A” size knockouts: 2 Bottom / 2 Back / 2 Top


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

17

MDU ENCLOSURERSRNBB-PLT Enclosure

RNBB-PLT-12128

Features & Benefits• Back plate can remain mounted to wall during maintenance to allow your customer uninterrupted service • Gray baked-on powder coating; UL standards outdoor box rating, high corrosion resistance • Drain holes to keep moisture out • Designed with PVC style knockouts to accommodate a quick and easy separation from back plate • Available in steel or aluminum


Varies W/ Options RNBB-PLT-12128 Box-In-Box High Security Enclosure 12”W x 12”H x 8”D Each





SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

18

MDU ENCLOSURERSTelephony Broadband Double Door Enclosure

Features & Benefits• Now available in depths of 10” and 15”• Available in aluminum• Hinged 2-door cover• Gray baked-on polyester powder coating

Options• 2 separated compartments • Standard accessories • Various locking hardware • Standard knockouts, size and location • Voice port mounting plates


Varies W/ Options RN2H-18248 Telephony Broadband Double Door Enclosure 18”W x 24”H x 8”D Each




SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

19

MDU ENCLOSURERSRNH Hinged Series Enclosures

Features & Benefits• Hinged cover• Gray baked-on polyester powder coating. UL 50 standard outdoor box rating, high corrosion resistance • Knockout for optional Cam Lock • Multiple entry knockouts • Indented mounting holes for easy installation • 3/4” D-Knockout • Drain holes to keep moisture out • Available with Star Slam Lock

Standard Knockouts

Box Style Knockouts Sizes

RNH-10126 2 Bottom 1 Size A / 1 Size C








Varies W/ Options RNH-10126 Hinged Series Enclosure 10”W x 12”H x 6”D Each







RNH Box with Drop Stand/Organizer Option

Custom sizes always availablePlease contact Customer Service for more information

Uses same replaceable hasp system as RNB series boxes


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

20

MDU ENCLOSURESRNB Series Enclosures

Box Style Standard Knockouts Knockout Sizes

RNB-8126 2 Bottom 2 Size C

RNB-12126 2 Bottom 1 Size B / 1 Size C

RNB-12188 3 Bottom 1 Size B / 2 Size C2 Each Side / 2 Size C

RNB-24188 4 Bottom 2 Size B / 2 Size C2 Each Side / 2 Size C


Varies W/ Options RNB-8126 Series Enclosure 8-1/8”W x 12”H x 6-1/8”D Each



Varies W/ Options RNB-24188 Series Enclosure 24”W x 18”H x 8-1/8”D Each

Features & Benefits• Gray baked-on polyester powder coating. UL 50 standard outdoor box rating, high corrosion resistance • Knockout for optional Cam Lock • Multiple entry knockouts • Indented mounting holes for easy installation • 3/4” D-Knockout • Drain holes to keep moisture out

Stock codes vary depending on options such as locks and other accessories Please call Customer Service for custom sizes, configurations, and lock specifications

Zinc chromate, replaceable hasp, standard with every RNB series box.


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

21

Features & Benefits• Can be set up with a variety of cylinder locks, the Innertite Lock, or a tamper proof screw • Gray baked-on polyester powder coating, UL standards outdoor box rating, high corrosion resistance • Multiple entry knockouts • Drain holes keep moisture out

Multilink is the only manufacturer of steel enclosures for the Cable TV industry that offers built-in drain holes standard throughout the entire product line


Varies W/ Options RNHL-444 Hanging Lid Series Enclosure 4” W x 4” H x 4” D Each


















Multilink is the only manufacturer of steel enclosures for the Cable TV industry that offers built-in drain holes standard throughout the entire product line.Stock codes vary depending on options such as locks and other accessories. Please call Customer Service for custom sizes, configurations, and lock specifications.

MDU ENCLOSURESRNHL Hanging Lid Series Enclosure


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

22

Features & Benefits• Can be set up with a variety of Cylinder Locks, the Innertite Lock, or a tamper proof screw • Gray baked on polyester powder coating, UL standards outdoor box rating, high corrosion resistance • Multiple entry knockouts • Drain holes keep moisture out

Special heavy duty grommets, shown above, are now avail-able on all MDU steel units.


Varies W/ Options RNHX-121210 Side Swing Hinge Series Enclosure 12”W x 12”H x 10”D Each



Varies W/ Options RNHX-181810 Side Swing Hinge Series Enclosure 18” W x 18”H x 10”D Each



13028 Small Heavy Duty Special Mdu Grommet - Each

70910 Large Heavy Duty Special Mdu Grommet - Each

Please call Customer Service for more informationStock codes vary depending on options such as locks and other accessoriesPlease call Customer Service for custom sizes, configurations, and lock specifications

MDU ENCLOSURESRNHX Side Swing Hinge Series Enclosure


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

23

MDU TOOLS/ACCESSORIESRNI High Security Locking Systems For Roughneck Steel Enclosures

The MX High Security Customized Locking System-DX Compatible• The most secure lock ever developed specifically for the Cable TV industry. • Fully compatible with pre-existing DX keyways. • The MX Locking System, unlike the DX Meter and Superlock Systems, cannot be defeated by being drilled or bored out with a power drill or by the “car thief” slide hammer. • The unique, patented dual pin design makes the MX the most reliable lock in the industry.

Inner-Tite® Agbay Barrel Lock & KeyInner-Tite® Barrel Lock and Key

Van Lock Cam Lock Van Lock Cam Lock Key

Lock part numbers vary depending on type, key way, etc Please call Customer Service for more information


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

24

MDU TOOLS/ACCESSORIESHigh Security Locking System For Roughneck Steel Enclosures

Van Lock Plug Lock Master Pad Lock Let’s Talk Security

Customized Lock

Ace/Chicago and American Locks with customized key codes can be ordered through Multilink Multilink is a full line distributor of American LocksThe Multilink data bank tracks all keys and drivers sold by six-digit number system For more details, please call Customer Service. Lock part numbers vary depending on type, key way, etc.

Supra LockPlastic Supra Lock Dry Lid

Self-locking CPLM1 is available in Cable Plug Lock-Master Series and CPLV Cable Plug Lock-Vanamatic (8 in 1).

Multilink is a full line distributor of the most trusted locks in the world, the Master Padlock with (2) keys.

New optional logo/six-digit code. Now you can track and know where your keys and drivers are!

Features & Benefits• Reduce passing/transferring of keys • Keep track of your security • Track theft of service • When issuing keys and drivers you can track by six-digit security with employees and subcontractors • Available on keys and tamper-proof drivers

NEEDS KEY PHOTO


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

25

MDU TOOLS/ACCESSORIESThe Multilink Tamper Proof Drivers & Screws

MultiScrew Installed on self locking pedestals, lock boxes, and Tom Peds can be interchanged with some Multilink security products

Tamper Proof Screw Drivers Made from hardened steel, plated in Zinc Chromate

A B

Figure Part# Description UOM

A 12333Z RNED-101 Eccentric Driver Each

- 12334K RNED-101N Eccentric Driver Each

- 12073K RNED-501 Tamper Proof Driver Each

B 12335Z RNSD-200 Tamper Proof Driver Each

C

D

Star/Slam Lock screw available in custom patternCall Customer Service for more information


C 12814 RNE-501 Tamper Proof Screw Each

D 10-5275 RNE-100 Eccentric Thread Pitch Each


SEC

TIO

N 1

MD

U E

NC

LOSU

RES

/ I

NST

ALL

ATI

ON

A-D - Screen Plate E-J - Oxboard K-O - Touch-Up Paint

P-R - Star Plate S - D-Mark Plate T - Ground Lug

Figure Part# Description Dimensions UOM

A 12039K Screen Plate Fits 10” x 12” x 8”/12” x 12” x 8” Each

B 12040K Screen Plate 12” x 18” x 8” -

C 12041K Screen Plate 18” x 24” x 8” Each

D 12042K Screen Plate 20” x 24” x 8” -

E 12051K Oxboard Backing 8” x 12” x 8” Each

F 12044K Oxboard Backing 12” x 12” x 8” -

G 12046K Oxboard Backing 15” x 18” x 8” Each

H 12047K Oxboard Backing 18” x 24” x 8” -

I 12049K Oxboard Backing 20” x 24” x 8” Each

J 12050K Oxboard Backing 36” x 36” x 8” -

K 12715 Brown Touch-up Paint - Each

L 12716 Beige Touch-up Paint - -

M 12717 Bright-red Touch-up Paint - Each

N 12718 White Touch-up Paint - Each

O 12719 Grey Touch-up Paint - Each

P 12036K Star Plate Fits 10” x 12” x 8”/ 12” x 12” x 8” -

Q 12037K Star Plate 12” x 18” x 8” Each

R 12038K Star Plate 20” x 24” x 8” -

S 12043K D-Mark Plate For Roughneck Steel Enclosures - Each

T 12704K Ground Lug - -

26

MDU TOOLS/ACCESSORIESOptions and Accessories for Roughneck Steel Enclosures


SECTIO

N 1

MD

U EN

CLO

SUR

ES / INSTA

LLATIO

N

27

MDU TOOLS/ACCESSORIESOptions and Accessories for Roughneck Steel Enclosures

Keep from losing the detachable lids from your Roughneck Steel Enclo-sure with this high strength retain-ing cable with eyelets

New Tap Mounting Bracket Mount taps quickly and easily inside your roughneck box

Optional louvres available on yourMDU, please call Customer Service for more information

Part# Description UOM

12709 Roughneck Lid Retaining Cable With 1 Hook Each

12712 Roughneck Lid Retaining Cable With 2 Hooks Each

12708K RNBT-7 Tap Bracket Each

Why does Multilink use Galvanealed Steel vs. Aluminized Steel in the construction of our Steel MDU Enlcosures?

Gavanealed Steel - Starzinc-Alloy Aluminized Steel - Al-MightFeatures• Uniform zinc coated steel sheets feature paint adhesion quality not found in other coated steel sheets• Surface roughness encourages paint adhesion and provides base for finishing

Uses• Automobile Underbody parts, reinforcing parts• Outdoor Roofing, siding, shutters, doors, and traffic signs• Indoor Air conditioner housings, commercial refrigerators, washing machines, steel furniture, office machines, furnaces, and ovens

Features• Aluminum coated steel sheets offer high-grade resistance to corrosion and heat• Excellent heat reflective and good formability• Beautiful finish even under high temperature

Uses• Automobile Exhaust pipes, mufflers, catalytic converters, auto heat shields• Indoor Chimneys, fireplaces, stoves, heat exchangers, water heaters, furnaces, barbecue grills, ovens, and toasters

Aluminized Steel Al-Might

Galvanealed SteelStarzinc-Alloy


SEC

TIO

N 2

CA

BLE

MA

RK

ERS

28

MDU TOOLS/ACCESSORIESCable MarkersMFM Series Lasered Fiber Optic Cable Marker UV Stabilized Body for Weather and Color

• Standard/Stock Colors: Yellow and Orange. Custom Colors: Blue, Green, Gray, White, Brown, and Red• Please specify color when placing your order• Other custom colors available upon request• 500 Minimum Order with both RT & SL part numbers• 5,000 Minimum Order for custom colors• Please contact customer service for custom orders and more information• Please note: $75.00 one time set-up fee for special logo

Features & Benefits• Any print or logo your company desires• UV stabilized body• One step installation; Wrap-around design• Available in a variety of colors• Available in three different sizes• Lifetime warranty on printing and a 20 year pro-rated warranty on plastic body• Customization provides easy identification of your cables during emergencies or general maintenance• UV stabilized body won’t degrade in outside applications• Simple and quick installation: Wrap-around design eliminates the need for special tools and adhesives.• The variety of colors offered allow you to segregate your different fiber runs or to distinguish your cables from pre-existing cables• The three different sizes can accommodate a variety of cable configurations• Our marker will last the life of your system

J

Stock ID Description Dimensions Weight Lbs. UOM

A Varies MFM-12 Lasered Fiber Optic Cable Marker .5” x 8” (12.7mm x 20.3cm) - Each

B Varies MFM-15 Lasered Fiber Optic Cable Marker 1” x 8” (25.4mm x 20.3cm) - Each

C Varies MFM-20 Lasered Fiber Optic Cable Marker 2” x 8” (50.8mm x 20.3cm) - Each

D Varies MFM-12RT Custom Regular Type Name & # .5” x 8” (12.7mm x 20.3cm) - Each

E Varies MFM-15RT Custom Regular Type Name & # 1” x 8” (25.4mm x 20.3cm) - Each

F Varies MFM-20RT Custom Regular Type Name & # 2” x 8” (50.8mm x 20.3cm) - Each

G Varies MFM-12SL Custom Special Logo & # .5” x 8” (12.7mm x 20.3cm) - Each

H Varies MFM-15SL Custom Special Logo & # 1” x 8” (25.4mm x 20.3cm) - Each

I Varies MFM-20SL Custom Special Logo & # 2” x 8” (50.8mm x 20.3cm) - Each

J Varies *Flag Style Fiber Optic Cable Marker 3.75” L x 4” W - Each

A - I

Please contact customer service for custom orders and more information.


SECTIO

N 3

IMA

GE B

UILD

IMG

PR

OD

UC

TS

29

MDU TOOLS/ACCESSORIESDigital Converter Totes• Transport made easy• Protect your hardware while improving your image and organization

Rolling DigitalConverter Tote

Techbag Tote

DigitalConverter Tote

Converter Bags For CSR’sWhen receiving converters back,

the bags snuffs out insectsShoe Covers

Keeps carpet clean and bills downONE SIZE FITS ALL


SEC

TIO

N 3

IMA

GE

BU

ILD

IMG

PR

OD

UC

TS

30

DIGITAL CONVERTER TOTESThe Rolling Digital Converter Tote Transport Made EasyNot only holds and protects DVR and Converters, but also holds VOIP installation cables,high speed modems and other hardware and accessories

Part# Description Dimensions Weight Oz UOM

10-9440 Roller Tote 22” L x 19” W x 17” D 6 Each

Will Vary Logo Tech Bag 22”L x 19”W x 17”D 6 Each


SECTIO

N 3

IMA

GE B

UILD

IMG

PR

OD

UC

TS

31

DIGITAL CONVERTER TOTESThe Tech Bag It’s Your Image That Count

Part# Description Dimensions Weight Oz. UOM

10-8139 Tech Bag 22” L x 8” W x 16” D 3 Each

Will Vary Logo Tech Bag 22” L x 8” W x 16” D 3 Each

Benefits• Improve your professional image• Transport the growth of increased hardware offering into the home• Safer way of transporting converters and added hardware• Keeps the Tech organized• Custom logo available on techbag• Reduces repair costs when transporting converters and hardware


SEC

TIO

N 3

IMA

GE

BU

ILD

IMG

PR

OD

UC

TS

32

DIGITAL CONVERTER TOTESProtect Your Digital & Analog Converter Investment

Features & Benefits• Lockable security• Easy to maintain• Washable• Cell/inserts are replaceable• Attached cover• Highly durable• Stackable


37130 242015-B Gray Plastic Tote (6 Converters) 26” L x 19” W x 14.875” H Each

37333 242517-P Foam Shock Pad 24.5” L x 18” W Each

37115 214124-DCT Plastic Cell For DCT-1000/Terminal Block 18” L x 3” W x 13.625” H Each

37111 221157-B Gray Plastic Tote (4 Converter) 19.75” L x 14.5” W x 16.875” H Each

37112 218134-P Foam Shock Pad 18.4375” L x 13.25” W Each

37113 214123-DCT Plastic Cell For DCT-1000/Terminal Block 19” L x 2.875” W x 15” H Each

- Tech Bag Holds 3 Converters Each

Great for transporting in and warehouses and back to repair center


SECTIO

N 3

IMA

GE B

UILD

IMG

PR

OD

UC

TS

33

IMAGE BUILDING PRODUCTSCB Converter Bags & Disposable Shoe Covers

Features & Benefits• Converter Dispenser Repackaging bags are available in quantities of 500 per easy to use dispenser box• Each bag has space to write the date, the subscriber’s name, address, and account number along with an area for comments regarding the performance or condition of the converter• Each bag has a built-in plastic tie strip to seal the bag and is made from a durable 2 mil. clear poly film• Custom imprinting and/or logos are available Please call Customer Service for details• Reduces the roach and pest problems along with the handling of the converters in the field and office area• Converter disconnections, upgrades, and repair problems are handled quickly and easily with write-on disposable bags• Operations run more efficiently• Reduces scratches• Keeps converter dust free while sitting on the shelf

Features & Benefits• The Disposable Shoe Covers are made of poly-latex, no-skid material• The Disposable Shoe cover fits a size 16 shoe and lower (one size fits most)• The Disposable Shoe Covers are a new and inexpensive product from Multilink used to prevent tracking mud, dirt, grease, etc. on the floors and carpet of subscribers• No more angry phone calls from subscribers upset with dirt on their floors and carpets!• No more carpet cleaning bills from the dirty floors of subscribers • Improve image of the cable system as being professional, “One who cares about work and customers!”• Improve the productivity of the installer because he/she doesn’t have to spend time taking his/her boots/shoes off and on before entering the home


A 10-8141 CB-2026 Converter Bag 20” x 26” 500/Box

B 37911 SCJM-402-XD Work Boot & Regular Shoe Style - 50 Pair/Box

C 37922 SCJM-402-DW High Top Boot Style - 50 Pair/Bag

A B C


SEC

TIO

N 4

MA

INTE

NA

NC

E TO

OLS

34

A B C

D E F

The Multilink Tap Port Cleaner and Thread Chaser Tool is four tools in one! One side of the tool cleans off the tap threads just like a battery terminal cleaner. The second wire brush cleans the facing of the port, where the signal makes contact with the F-Connector. The other end of the tool re-taps the threads on the Tap Port Cleaner and doubles as an F-Connector Push-On Tool. Each of these features ensure better connectorization and signal contact with the F-Connector.

Features & Benefits• Crimps the center pin to a 0.100 hex (2.54mm)• Crimps RG6 and RG53 universal ribbed connectors to a 360 hex (9.15mm)• Crimps RG11 connectors to a .475 hex (12.07mm)


A 42340 UP-B76 Co-Axial Cable Cutter - Each

B 42350 63050 Co-Axial High Leverage Cable Cutter - Each

C 42258 1099-CT CATV Compression Connector Crimp Tool SNS RG7/11 - Each

D 42120 CS-8030 Circle Strip For RG6/RG59 - Each

E 900031823 3155-CT Crimping Tool 8” Long Each

F 38173K 5555-JLPC Tap Port Cleaner Thread Chaser Tool - Each

- 38183K 5555-JLPC WBK Replacement Kit (Includes 2 Brushes & 2 Stones) - Each

PREP TOOLSCable Prep Tools


SECTIO

N 4

MA

INTEN

AN

CE TO

OLS

35

A B C DImproper connection of the F-Connector is the number one cause of CLI signal leakage! Using a Multilink Torque Wrench can ensure proper connectorization, signal connectorization, and signal contact with the F-Connector at a minimum cost. State size, poundage, and quantity when ordering.


A 38025K 5520-TW, Torque Wrench 20 Inch/Pounds .375” (9.525mm) Each




















B 38219K 5520-TW, Adj Torque Wrench 20 Inch/Pounds .875” (0-22.225mm) Each




C 38051K 5520-SSTW, Torque Wrench 20 Inch/Pounds - Each




D 38946 5510-TWP, “Get Torqued” Torque Wrench 10.5 Inch/Pounds - Each

PREP TOOLSTorque Wrenches


SEC

TIO

N 4

MA

INTE

NA

NC

E TO

OLS

36

Cable Splicer’s Knife Fiber Optic Cleaver

Fiber Optic Stripping Kit

Features & Benefits• Tough, coping-style blade• Forged steel• Full-size, high dielectric, red cushioned handle

Features & Benefits• The revolutionary new cleaving tool from the leader in Fiber Optic Tools!• Small, compact size for field service work• After cleaving, fiber is held for safe disposal• Accommodates glass fibers with 125 µm nominal cladding diameters in cable or coated form

CLEAVE ANGLE

<1/2 degrees 50% of all cleaves

<1 degree 75% of all cleaves

<2 degrees 100% of all cleaves

• Factory replaceable carbide blade designed to yield consistent cleaves for up to 1,000 uses• Cleave length adjustable from 0.25” to 0.75” (6.5mm to 20mm) • Plated steel handles with plastic grips• Anodized aluminum cleaving blocks/fixtures • Polyurethane rubber cleaving and gripping pads• Optimal operating temperature: 72°F (23°C)

Three piece kit contains: • FOJS-2 Jacket Stripper• KS 68 1/2 SF Kevlar™ shear• FOS203 (min. cutting dia. 175 microns) Fiber Optic Stripper

FIGURE PART# DESCRIPTION DIMENSIONS WEIGHT UOM

A 99000000000CSK6 CSK6 Red Handle Cable Splicer Knife 6.25” (15.9cm) 1.5 Lbs Each

B 990000000FOC125 FOC125 Fiber Optic Cleaver 5.125” (13cm) x 1.75” (4.5cm) 0.15 Lbs Each

C 99000000FOS203K FOS202 Fiber Optic Stripping Kit 4” (10cm) X 6.25” (15.9cm) 1 Lbs Each

A B

C

PREP TOOLSFiber Prep Tools


SECTIO

N 4

MA

INTEN

AN

CE TO

OLS

37

Fiber Optic Strippers Fiber Optic Jacket Stripper

Fiber Optic Jacket Strippers

Features & Benefits• Mechanically strip buffer coating • Accurate to 5m (0.0002”)• No adjustments necessary • Color-coded handles for quick identifications• All fiber optic strippers are 5-1/4” (13.3cm) overall length and individually boxed

Features & Benefits• For stripping 125 micron fiber with 250 micron buffer coating• 0.78” (1.98mm) diameter stripping hole at tip of tool can be used to strip the fiber jacket• 0.0055 (0.014mm) diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber• Pre-set at the factory. No adjustments needed!• Will not scratch or knick glass fiber• All cutting surfaces are manufactured to precise tolerances to assure clean, smooth strips• Comfort-grip, ergonomic handles • Lock to hold tool closed when not in use• Made in the USA

Features & Benefits• Removes outside jacket from various sizes of fiber optic cable• Always leaves a clean strip• Color-coded cushion grip handles

A B

C

Figure Part# Description Dimensions Weight UOM

A 990000000FOS127 FOS127 127 µm/ 0.005” Min. Cutting Diameter Silver Handle Cover

5.25” (13.3cm) 0.25 Lbs Each

A 990000000FOS152 FOS152 152 µm/ 0.006” Min. Cutting Diameter Gold Handle Cover

5.25” (13.3cm) 0.25 Lbs Each

A 990000000FOS175 FOS175 175 µm/ 0.007” Min. Cutting Diameter Mustard Handle Cover

5.25” (13.3cm) 0.25 Lbs Each

A 73302 FOS203 203 µm/ 0.008” Min. Cutting Diameter Red Handle Cover

5.25” (13.3cm) 0.25 Lbs Each

A 99000000FOS254 FOS254 254 µm/ 0.010” Min. Cutting Diameter Light Blue Handle Cover

5.25” (13.3cm) 0.25 Lbs Each

A 9900000FOS305 FOS305 305 µm/ 0.012” Min. Cutting Diameter White Handle Cover

5.25” (13.3cm) 0.25 Lbs Each

B 9900000000FOJS1 FOJS-1 0.75mm (0.030”) Dia. & 1.00mm (0.40”) Dia. Cables Pink Handle Cover

5” (12.7cm) 0.75 Lbs Each

B 9900000000FOJS2 FOJS-2 1.25mm (0.050”) Dia. & 1.50mm (0.060”) Dia. Cables Maroon Handle Cover

5” (12.7cm) 0.75 Lbs Each

C 73306 FOS-1 (CFS-2) Fiber Optic Jacket Stripper 6.5” (16.5cm) 0.25 Lbs Each



SEC

TIO

N 4

MA

INTE

NA

NC

E TO

OLS

38


A 73301 2CL-310-VL Cleaver 250/900 Fitel S-315 - Each

B 6002MS4RB25S K-MS-4-RB-25S Micro-Strip Prelacement Blade - Each

B 73356 2MS1-RT-13 Micro-Strip Tube Guide (0.0135 DIA.) - Each

B 73357 2MS-1-RB-06N Micro-Strip Replacement Blade - Each

C 73304 86 1/2-S Wire Cutter - Each

D 73355 2MS-1-FS Micro-Strip Handle - Each

E 73305 2925 Electrician’s Scissors - Each

F 42130 85-0003 Slitting/Ringing Tool For Cable .25” x 1.5” Each

C D

E F

A B



SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS

Features• NEMA/EEMAC Type 4, 4X, 12 specifications• UL 508 listed, Type 1, 2, 3, 3R, 4, 4X, 12, 13• CSA certified LR 89590 for use with industrial equipment CSA Enc. 1, 2, 3, 4, 4X, 12, 13• Strong, molded fiberglass reinforced polyester construction with matching flat cover• Gasket made of closed cell neoprene cord encased in a continuous channel• 304 stainless steel wall mounting feet with 10-32 stainless steel screws included• 10-32 thread inserts are installed for optional back panel• Fiberglass material is easily punched, drilled or sawed• UV stabilized for outdoor use

Options• Optional painted carbon steel back panels• Optional aluminum back panels• Custom size polycarbonate viewing windows hinge installed on short side• Molded-in color matches• EMI/RFI shielding• Factory supplied silk screening


10-9001 AM 664 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 6.1” A x 6.1” B x 4.18” C Each

10-9002 AM 864 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 8” A x 6.12” B x 4.13” C Each







10-9009 AM 2068 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 20” A x 16” B x 8.13” C Each

10-9010 AM 664L SERIES JIC Size Junction Boxes With Hinged Cover 6.1” A x 6.1” B x 4.18” C Each

10-9011 AM 864L SERIES JIC Size Junction Boxes With Hinged Cover 8” A x 6.12” B x 4.13” C Each







10-9018 AM 2068L SERIES JIC Size Junction Boxes With Hinged Cover 20” A x 16” B x 8.13” C Each

39

C

A

B

SPLICE CLOSURESAM Series JIC Size Junction Box


SEC

TIO

N 5

PLA

STIC

DEM

AR

CA

TIO

N E

NC

LOSU

RER

S

40

SPLICE CLOSURESML-200 Telephony Demarcation EnclosureIdeal for terminating phone drops in cable VOIP installations

Features• Wall or pole mountable• Integrated security features• Hinged cover for ease in access• Corrosion and weatherproof for outdoor applications• Impact resistant and UV resistant for maximum field survivability


10-6897 ML-200 Telephony Demarcation Enclosure 3.24” W x 5” H x 2.5” D Each

Standard color is Gray

BenefitsThe Multilink ML-200 series telephony demarcation enclosure is a weatherproof outdoor product designed to allow for the interconnection or repair of traditional telephony grade copper conductors.

The enclosure can be used for interconnecting copper telephony conductors in VOIP applications without the need to re-run entire telephony inside wiring.

The enclosure can be mounted on most outdoor plant surfaces including poles and walls near existing telephony demarcation enclosures.

Within the enclosure are 4 brass posts with associated washers and nuts for terminating in-bound and out-bound copper pairs, which, if used, would allow for a means to separate the network from a station in test access situations.

The enclosure can also be used as a convenient location to repair copper conductors using standard discrete copper connectors.

The unit is designed with 2 entry ports at the unit’s base for in-bound and out-bound cabling and ground wire insertion.

The cover and base are hinged and can be secured via the molded in cover and base loop located on the right hand side.


SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS

41


Features• Wall or pole mountable• Integrated security features• Hinged cover for ease in access• Corrosion and weatherproof for outdoor applications• Impact resistant and UV resistant for maximum field survivability


020-023-10 ML-210 Telephony Demarcation Enclosure 3.24” W x 5” H x 2.5” D Each

020-001-20 NID Box, 2 Pair, Drop Distribution Terminal 3.24” W x 5” H x 2.5” D Each

Standard color is Gray

BenefitsThe Multilink ML-210 series telephony demarcation enclosure is a weatherproof outdoor product designed to allow for the interconnection or repair of traditional telephony grade copper conductors.

The enclosure can be used for interconnecting copper telephony conductors in VOIP applications without the need to re-run entire telephony inside wiring.

The enclosures can be mounted on most outdoor plant surfaces including poles and walls near existing telephony demarcation enclosures.

Within the enclosure are 4 3M Scotchlok™ UR2 connectors for 2-or-3 wire solid copper conductor combinations of 19-26 AWG for terminating in-bound and out-bound copper pairs, which, if used, would allow for a means to separate the network from a station in test-access situations.

The enclosure can also be used as a convenient location to repair copper conductors using standard discrete copper connectors.

The unit is designed with 2 entry ports at the unit’s base for in-bound and out-bound cabling and ground wire insertion.

The cover and base are hinged and can be secured via the molded in cover and base loop located on the right hand side.

Also available in 4 pair and 6 pair terminating as well as a brass grounding paste with associated washers and nuts.


SEC

TIO

N 5

PLA

STIC

DEM

AR

CA

TIO

N E

NC

LOSU

RER

S

42


INSTRUCTIONS FOR SPLICING WITH UR2 CONNECTORS1. Locate the joint by twisting the wires one full turn2. Clip wire ends evenly a minimum of 1 in (25 mm) in front of the twist DO NOT STRIP INSULATION3. Hold connector with button side down. Insert wires all the way into ports4. Crimp the button using a Scotchlok™ E-9 series tool. Depress all the way


SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS

43

PLASTIC DEMARCATION ENCLOSURESRNI-3800 Single Door Plastic Demarcation Enclosure


10-8609 RNI-3800 Single Door Plastic Demarcation Enclosure withLocking Terminator. Optional Plywood backing available.

11.95”H x10”W x 5.25”D 18/Case 10/Case

Features & Benefits• Dual locking system.• Removable cover.• Plywood Optional.• UV stabilized plastic can be painted with Latex paint.• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding.• Standard color is Gray.• Custom Logos/Imprints. Injection molded available.

Louvers are designed into cover to look like vents on the side of homes

Custom logo available and molded into plastic

Locking Terminator

Locking hole for cable lock or wires

B

A

C


SEC

TIO

N 5

PLA

STIC

DEM

AR

CA

TIO

N E

NC

LOSU

RER

S

PLASTIC DEMARCATION ENCLOSURESRNI-3900 Single Door Plastic Demarcation Enclosure


10-9899 RNI-3900 Single Door Plastic Demarcation Enclosure withLocking Terminator. Optional Plywood backing available

12.125”H x 9.704”W x 3.501”D 18/Case 10/Case

Features & Benefits• Dual locking system• Removable cover• Plywood Optional• UV stabilized plastic can be painted with Latex paint• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Standard color is Gray• Custom Logos/Imprints• Injection molded available

B

A

C


SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS

PLASTIC DEMARCATION ENCLOSURESMultimedia Single Door Plastic Demarcation Enclosure


30617K RNI-3600 Single Door Plastic Demarcation Enclosure withLocking Terminator

10”W x 10”H x 3.22”D 18/Case 10/Case

30619K RNI-3600-SR Single Door Plastic Demarcation Enclosure withLocking Terminator - Special Resistance Material

10”W x 10”H x 3.22”D 18/Case 10/Case

30615K RNI-3600-TS Single Door Plastic Demarcation Enclosure withLocking Terminator - Special Resistance Material

10”W x 10”H x 3.22”D 18/Case 10/Case

10-6008 66 Punch Down Block - 50 Pair 10”A x 10”B x 3.2187”C 18/Case Each

10-6009 66 “Mini” Punch Down Block - 6 Pair - - Each

163 2 Pair Terminal With Ground Plastic Demarcation Enclosure - 0.5 Each

Features & Benefits• Dual locking system• Removable cover• Plywood Optional• UV stabilized plastic can be painted with Latex paint• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Standard color is Gray• Custom Logos/Imprints• Injection molded available

B

A

C


SEC

TIO

N 5

PLA

STIC

DEM

AR

CA

TIO

N E

NC

LOSU

RER

S

PLASTIC DEMARCATION ENCLOSURESMultimedia Double Door Plastic Demarcation Enclosure


30652K RNI-3620 Double Door Plastic Demarcation Enclosure OD 17.25”L x 11.25”W x 3.875”DID: 16”L x 10”W x 3.22”D

CAD: 6”L x 11.25”W x 3.875”D

36/Case 10/Case

30659K RNI-3620 Double Door Plastic Demarcation EnclosureSpecial Resistance Material

OD 17.25”L x 11.25”W x 3.875”DID: 16”L x 10”W x 3.22”D

CAD: 6”L x 11.25”W x 3.875”D

36/Case 10/Case

Exterior Features• Weatherized UV stabilized plastic for the ultimate protection against the elements• Dual locking system• UV stabilized plastic can be painted with Latex paint• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Can be wall mounted or on a pedestal stake• Standard color is Gray• Custom Logos/Imprints. Injection molded available

Interior Features• Both plastic dividers can be removed for increased versatility• The removable plastic insert plate has 2 knockouts for F-81 hex holes and an open end hex hole in the center of plate for an F-81


SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS

PLASTIC DEMARCATION ENCLOSURESRNI-3615 Double Door Plastic Demarcation Enclosure

Stock ID Description Dimensions UOM

30632K RNI-3615 Double Door Plastic Demarcation Enclosure 8”B x 14”A x 3.5”C 10/Case

30631K RNI-3615-SR Double Door Plastic Demarcation Enclosure Special Resistance Material (Not Pictured)

8”B x 14”A x 3.5”C 10/Case

10-6008 66 Punch Down Block - 50 Pair - Each

10-6009 66 “Mini” Punch Down Block - 6 Pair - Each

Features & Benefits• Dual door access and locking• Removable cover• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Custom injected molded logo available• Weatherized UV stabilized plastic for the ultimate protection against the element• Enclosure can be painted with Latex paint• Unique ribbed backing built into the enclosure for easy mounting of equipment anywhere on the pattern• Removable plastic divider for increased versatility• Plywood optional.• Special resistance material available upon request (see below), includes 15 year pro-rated warranty• Standard color is gray

B

AC


SEC

TIO

N 5

PLA

STIC

DEM

AR

CA

TIO

N E

NC

LOSU

RER

S

PLASTIC DEMARCATION ENCLOSURESRNI-5211 Single Dwelling VoicePort Plastic Demarcation Enclosure


30661K RNI-5211 Single Dwelling Voice Port Enclosure 20”H x 9.5”W x 4.5”D - 10/Case

30665K RNI-5212 Single Dwelling Voice Port Enclosure( w/screen and mounting hardware included )

20”H x 9.5”W x 4.5”D - 10/Case

Features & Benefits• Flexible mounting backing• Enlarged capacity for voice part and passive devices• Dual door locking system• Removable doors• Plywood optional• Can be wall mounted, pole mounted, or pedestal stake mounted• Standard color is light gray• Custom Logos/Imprints. Injection molded available• Flame retardant materials are available• Standard color is gray• Please call Customer Service for more information and a part number

B

A

C


SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS


30211K-T SDU-9134 Set up with replaceable hasp and locking terminator security post

13”L x 9”W x 4”H 19/Case 10/Case

30222K SDU-9134 Set up with replaceable hasp and locking terminator security post - Features Deep Lid

13”L x 9”W x 5”H 16 /Case 8/Case

- SDU-9134 features tamper proof screws - - 10/Case

The SDU is more than a plastic enclosure. The innovative, NON CAPTIVE designspeeds the upgrade installation timeof installing a new demarcationenclosure without disconnecting thecustomer’s service!

Features & Benefits• Guard Tower locking terminator• Replaceable Hasp• Custom Logos/Imprints• Injection molded available• Standard color is gray

PLASTIC DEMARCATION ENCLOSURESSDU9134 (Single Dwelling Unit)Non-Captive Plastic Demarcation Enclosure

B

AC


SEC

TIO

N 5

PLA

STIC

DEM

AR

CA

TIO

N E

NC

LOSU

RER

S


30125K CC-1/JR-T Set Up for Locking Terminator Use 7.375”H x 4.75”W x 1.625”D - 50/Case

30166 CC-1/JR-TS Star Tamper Proof Screw 7.375”H x 4.75”W x 1.625”D - 50/Case

30105K CC-1/DWB-T 9.5”H x 6.5”W x 3.75”D - 50/Case

30306K CC-1/DWB-TX “X” Back 9.5”H x 6.5”W x 3.75”D - 30/Case

30307K CC-1/DWB-TS Tamper Proof Screw 9.5”H x 6.5”W x 3.75”D - 30/Case

30155K CC-1/110-T Set Up for Locking Terminator Use 11”H x 7”W x 4.25”D - 30/Case

30413 CC-1/110-TS Star Tamper Proof Insert 11”H x 7”W x 4.25”D - 30/Case

30412K CC-1/100-T Set Up for Locking Terminator Use-Low Profile Cover 11”H x 7”W x 2.5”D - 36/Case

30411 CC-1/100-TS Star Tamper Proof Insert 11”H x 7”W x 2.5”D - 36/Case

31430 C-1/H Hasp for CC-1 Enclosure - - Each

31701 578-RTO Riser Tubing .5”ID x .875”OD x 6’ - 50/Case

31702 578-MS New Slit Back Snap-On Style Riser Tubing-Gray .875 - 50/Case

31708 578-MS1 Mounting Strap for Riser Tubing 1” - 50/Case

31705 578-RT Solid Wall Riser Tubing-Gray .5”ID x .875”OD x 6’ - 50/Case

31709 578-RT1 Solid Wall Riser Tubing-Gray .875”ID x 1”OD x 6’ - 50/Case

31440 C-1PC Terminator Cap for CC-1 Enclosures-Gray - - 50/Case

33200 8480 #8 x 1” Hex Screw - - 1,000/Pack

30661K RNI-5211 Single Dwelling Voice Port Enclosure 20”H x 9.5”W x 4.5”D - 10/Case

30665K RNI-5212 Single Dwelling Voice Port Enclosure( w/screen and mounting hardware included )

20”H x 9.5”W x 4.5”D - 10/Case

• Shown with optional back mounting plate for brick mortar joint align mount• Available on some model demarcation enclosures• Can be securely locked with a locking terminator or tamper-proof screw, like Star or Diversified for example

Features & Benefits• Dual locking system• Guard Tower locking terminator• Replaceable hasp• Custom Logos/Imprints• Injection Molded available• Have it your way, we customize to your application!

Patent #331-740

B

CA

PLASTIC DEMARCATION ENCLOSURESNon-Captive Plastic Demarcation EnclosureCC-1/JR, CC-1/DWB, and CC-1/110-T


SECTIO

N 5

PLA

STIC D

EMA

RC

ATIO

N EN

CLO

SUR

ERS

PLASTIC DEMARCATION ENCLOSURESAccessories and Mounting Hardware


A 1000-A Plastic Security Enclosure-Gray 4.875” x 2” - Each

B 1100-B Plastic Security Enclosure-Gray 4.875” x 3.5” - Each

C C-1/H Hasp for CC-1 Enclosures - 50/Case

D 578-RTO Slit Back Snap-On Style Riser Tubing .5” ID x .875” OD x 6’ - 50/Case

E 578-MS Mounting Strap for Riser Tubing .875” - 50/Case

F 578-MS 1 Mounting Strap for Riser Tubing 1” - 50/Case

Features & Benefits• Dresses up drops• Protects passives from elements• Pre-wiring drops

The 1000 Series Security Enclosures

Replacement HaspFor CC-1 Enclosures

Riser TubingProtect drop cable

from weed eaters and environmental damage with

solid wall riser tubing

Mounting StrapFor Riser Tubing

A B

C E & FD


SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E

SECURITY SEALSMULTITAG™ Tamper Resistant Security Seals For Audit Control

Exclusively manufactured by Multilink, Inc., which enables you to customize your tag anyway you want!

The Multilink, Inc. MULTITAG™ was designed with the installer’s problems and needs in mind. The uniquely patented design surrounds the cable with both the body and hasp, making the tag virtually tamperproof!

Standard Package is 100 pieces per bag

MT-LOCustom Logo

MT-AN7 Digit Alphanumerical w/Custom Name

MT-AL7 Digit Alphanumerical w/Custom Logo

Colors: Add number to end of MULTITAG™ number

MT-WNWriting Panel w/Custom Name

MT-WLWriting Panel w/Custom Logo

MT-NOCustom Name

Color # Color Color # Color Color # Color

01 Yellow 06 Black 12 Dk. Green

02 Orange 07 Red 13 Blue Green

03 Purple 09 Lt. Blue 14 Rose

04 Gold 10 Dk. Blue 15 Beige

05 White 11 Lt. Green


SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE

SECURITY SEALSMULTITAG™ Tamper Resistant Security Seals For Audit Control

Exclusively manufactured by Multilink, Inc., which enables you to customize your tag anyway you want!

The Multilink, Inc. MULTITAG™ was designed with the installer’s problems and needs in mind. The uniquely patented design surrounds the cable with both the body and hasp, making the tag virtually tamper proof!

Color # Color Color # Color Color # Color

01 Yellow 06 Black 12 Dk. Green

02 Orange 07 Red 13 Blue Green

03 Purple 09 Lt. Blue 14 Rose

04 Gold 10 Dk. Blue 15 Beige

05 White 11 Lt. Green

Standard Package is 100 pieces per bag

Colors: Add number to end of MULTITAG™ number

Bar Code your Multilink, Inc. MULTITAG™ and get a second set of bar codes to stick on the audit work sheet report!

MT-AO7 Digit, Alphanumerical

MT-WOWriting Panel

MT-LWLarge Writing Panel

MT-POPlain

MT-WAWriting Panel, w/7 Digit Alphanumerical

MT-BABar Code w/7 Digit Alphanumerical(Minimum Order of 5,000 pieces)


SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E

DROP INSTALLATION MATERIALS

New Plastic Horizontal and Vertical Siding Clips

Cable installers love this innovative design. Allows rapid, snap-on installation without special tools (only a screwdriver). No nails, no staples, no mess. These residential siding clips are trouble-free! The premium grade nylon lasts longer. Resists weather. Replacement call backs or complaints are virtually eliminated. The customers appreciate the safe and neat installation. No possible tool damage or punctures to siding. No rust or stain from nails or staples. No deterioration.


A 10-6050 Horizontal Sliding Clip Black 100/Bag

B 10-6051 Vertical Sliding Clip Black 100/Bag

A B

Part# Description UOM

10-6052 Single Feed-thru Bushing For RG-6 Black Each

10-6053 Single Feed-thru Bushing For RG-59 Black Each

649-022-12 Fiber Plug 3mm Each

FIBER PLUG®

Multilink Plastic Flush Wall Entry PlugWith Built-In Bend Radius SystemSingle Fed Thru Bushing

• Designed to meet the special requirements of the telecommunications industry• It provides unequaled holding power in less-than-perfect holes through many kinds of construction materials, including masonry walls• Each bushing has multiple reverse barbs which flex to fill the hole and secure themselves to prevent easy pull-out after insertion• The single strand bushing comes in both RG6 and RG9 sizes


SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE

55

DROP INSTALLATION MATERIALS

A - Tie Wraps B - Tree Guard C - Squirrel Guard

Squirrel Guard• Protect hard and drop cable from hungry squirrels and other pesky rodents with Multilink Squirrel Guard • Squirrel Guard is now available in two styles • Both the Green Flex and the Squirrel Guard Slinky are easy to install and will provide superior protection from rodent damage to your cable


A 33500 IT18R 4” Black Tie Wraps W/ ID Plate 4” 100/Bag

- 33511 N-7-50-0-C 8” Tie Wraps 8” 100/Bag

- 33522 PLT4S-CO 14” UV Tie Wraps 14” 100/Bag

- 33533 T30L 14-1/2” Black Tie Wraps 30# Std. 14.5” 100/Bag

B 24304 74323-TG Tree Guard Black .5” x 6’ 150/Carton

- 24314 73433-TG Tree Guard Black 1” x 6’ 60/Carton

- 24324 73435-TG Tree Guard Black 1.5” x 6’ 28/Carton

- 24334 73437-TG Tree Guard Black 2” x 6’ 20/Carton

C 24503 7003-SGJ Green Flex For RG6 & RG59 - 100/Carton

- 24514 73435-SGT Green Flex 1.5” x 6’ 75/Carton

- 24523 73433-SGT Green Flex 1” x 6’ 75/Carton

- 24512 73435-SGT Green Flex 1.5” x 100 100/Carton

- 73431 73431-SGT Green Flex 0.4310” x 6’ 75/Carton


SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E

Features & Benefits• Lower inventory types, only two part numbers to stock• Complete assembly - includes fastening screw (for surface mount)• Fits all standard coaxial and twisted pair drop cables• Ready for cable installation with an included outdoor tie wrap• Vertical or horizontal mount for siding applicationsSpecial Features• Run additional cable/phone lines without installing additional clips

US Patent 6,378,814B1


A 33625K CSM-6 Surface Mounting Clip Black 100/Case

- 33626K CHV-6W Siding Clip White 100/Case

B 33627K CHV-6B Siding Clip Black 100/Case

Surface Mounting Clip Siding Clip

Horizontal Application Add Twisted PairVertical Application

• The Smart Clip replaces all the surface mounting clips and siding clips you are now using for cable installation on the side of homes• Cut inventory from 20 line items to 2 line items• There are only two Smart Clips, a surface mount clip and a siding clip• They use detachable or multi-detachable tie wraps, eliminating the need for multiple sizes of clips• Smart Clips can be used horizontally or vertically

DROP INSTALLATION MATERIALSSmart Clips Surface Mount/Siding Clips / The All-In-One Cable Clip !


SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE

DROP INSTALLATION MATERIALSPlastic & Steel Cable Clips The Screw-In Clips for 6/59 or 7/11 Cable


A 10-9980 625-RG11 Plastic Strap & Screw For RG11 For 0.393” - 0.405” Diameter Cable 100/Bag

B 33535K 620-RG6QS Plastic Strap & Screw For RG6 For 0.272” - 0.300” Diameter Cable 100/Bag

- 33539K 625-RG6DS Plastic Strap With Drill & Tap Screw For 0.272” - 0.300” Diameter Cable 100/Bag

A B

Features & Benefits• Clips secure to either 6/59 or 7/11 series cables without limiting transmission signal bandwidth• UV stabilized Xenoy® clip body has a temperature range of -50°F to 300°F. No cracking, splitting, or chipping • Smooth, rounded edges of clip bodies will not cut or abrade cable shielding, eliminating a cause of signal leakage• Screws are specially hardened, plated, and treated to withstand 1,000 hours of corrosive salt spray testing per ASTM B 117



A 33717 WPIH - Ivory, Hex Hole In Front Each

B 33727 WPIK - Ivory, Dual Knockouts Each

C 33745 WPICT - Dual Combination Coax/phone Each

D 33737 WPID - Ivory, Dual Hex Holes In Front Each

E 33747 WPIL - Ivory, 5/8” Round Center Hole Each

F 33767 WPIH/81 - Ivory, F-81 Each

G 33757 WPIO - Ivory, Off set Hex Holes In Front Each

H 33787 WPIR - Ivory, Round Hole Each

I 33769 WPID/81 - Ivory, Dual Hole Each

- - WPIB - Ivory, Blank Each

DROP INSTALLATION MATERIALSWall Plates High Impact Plastic, Complete with Mounting Screws

A - WPIHIvory, Hex Hole in Front

B - WPIKIvory, Dual Knockouts

C - WPICTDual Combination Coax/Phone

D - WPIDIvory, Dual Hex Holes in Front

E - WPILIvory, 5/8” Round Center Hole

F - WPIH/81Ivory, F-81

G - WPIOIvory, Off set Hex Holes in Front

H - WPIRIvory, Round Hole

I - WPID/81Ivory, Dual Hole

Standard Packaging: 50/box, 1,000 pieces/carton for all sizesSpecial Order: Available in Brown & White on special order onlyCustom Lasered Logos Available

SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E


DROP INSTALLATION MATERIALSSurface Mount Junction Boxes & Face Plates

Figure Part# Description Dimensions Weight Lbs. UOM

A 99580K MJB-1-I Ivory Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 LBS Each

- 99581K MJB-1-WH White Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 LBS Each

- 99584K MJB-1-OW Off White Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 LBS Each

B 99582K MJB-2-I Ivory Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 LBS Each

- 99583K MJB-2-WH White Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 LBS Each


C 84512-SWB 2 Piece Wall Plate Box 4.5” x 2.5” x 1” Each

D 84430-SWB Wall Plate Box/Junction Box With Full Backing 4.5” x 2.5” x 1” Each

E 84421-SWB Wall Plate Box/Junction Box 4.5” x 2.5” x 1” Each

A B

C D EThis 2-piece wall plate box offers 4 knockout entry holes which are ideal for a 4-way junction box. The 2-piece wall box can easily be mounted to an uneven surface.

This wall plate box with a back has the same features as the 84421-SWB along with a full backing and a 2 stage knockout with 1/2” ID and 1” OD. Also four mounting holes and two knockouts on each side.

Installing directional taps and passive equipment on hard concrete walls or areas where there are no outlet holes can be a problem without the use of a junction box.

59

SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE


DROP INSTALLATION MATERIALSWall Plates

Protruding and Recessed Wall Plates High Impact PlasticUnique protrusion and indentation protects cable wiring and connectors from contact with furniture, TV, and other household appliances that are routinely placed close to the wall.

Features & Benefits• Perfectly suited for both CATV and LAN applications• Recommended for residential and institutional application• Perfect for college dorm rooms, offices, and in the home• Protect your investment and avoid costly repair calls• Can be customized to fit any size connector or cable


A WP-2SP-XX Protruding Wall Plate W/ Dual Knockouts Each

B WP-1SR-XX Recessed Wall Plate Each

C SWWICT Ivory Protruding Wall Plate For Mod Jack And F81 Each

- SWWWCT White Protruding Wall Plate For Mode Jack And F81 Each

Wall Plate Mounting Brackets For Construction Applications


D 33700 MP1 Wall Plate Mounting Bracket 100/Box

E 33702 MPLS Wall Plate Mounting Bracket 100/Box

A B C C

D E

SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E


DROP SPLICE HARDWARESplice Kits

Gelseal™ Splice Kit Re-Enterable

Test Test Conditions

Environmental Cycling -40°C to 60°C; 3 cycles/day; 100 cycles

Heat Aging 60°C; 30 days

Water Immersion Room temperature for 30 days; 2 foot water head

Freeze-Thaw Cycling -40°C to 60°C; 2 cycles per day; 1000 cycles

Slat Fog Per ASTM B-368; 30 days

Soil Chemical Resistance 30 day immersion in: 0.1N Na2SO40.1N H2SO40.1N NaCL0.1 NaOH

••••

Fungus Resistance Per ASTM G-21

• One size fits all RG6/59 or RG7/11 drop cable and 2-6 twisted pair phones lines• Reduces your inventory• Stock one size for direct burial underground splices

Mechanical SpecificationsSplices protected when direct buried and exposed to temperature ranges of -40°F to 140°F.

Gelseal™ Re-Enterable

3614-GS Shown with Coaxial & Twisted Pair

SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE


A B C D E


- 34120K-OR 3610-GS For RG6/59 Drop Cable Twisted Pair Orange Kit 4”L x 1”W x 1.5”H Each

A 34120K 3610-GS For RG6/59 Drop Cable Twisted Pair Black Kit 4”L x 1”W x 1.5”H Each

B 34122K-OR 3611-GS For RG7/11 Drop Cable Twisted Pair Orange Kit 7.75”L x 1.5”W x 1.75”H Each

C 34123K-OR 3612-GS Splice Repair Kit For 0.412 - 0.750 Feeder Cable Black Kit 12”L x 2.25”W x 3.5”D Each

D 34145K 3614-GS Multi Gelseal™ Splice Orange Kit 6”L x 2”W x 1”D Each

E 10-8342 3612-GS For RG59, RG6, RG7, RG11 and 312 Drop Cable Twisted Pair Black Kit 4.25”L x 2.375”W x 1.5”H Each

3615-GS Gelseal™ Re-EnterableGeneral Product Information• Multilink’s 3615-GS Gelseal™ is designed for splicing for 2-14 gauge wire in underground, direct buried and aerial applications• Additional single cable Re-enterable Gelseal™ units for drop cable twisted pair and feeder cable are available• Please contact Customer Service for more informationDielectric Properties• 500V per mil thickness of gel

3615-GS closed


34121K 3615 Plastic Power Splice Full W/ DSR2 Connector Black Kit 4.25”L x 2.375”W x 1.5”H Each

34118K 3615-GS Plastic Power Splice W/out Connector 4.25”L x 2.375”W x 1.5”H Each

DROP SPLICE HARDWARE

Gelseal™ Splice Kit Re-Enterable

SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E


HARDLINE SPLICE REPAIR

A - CC-16 Dri-Splice

Features & BenefitsKeep your underground splices dry with the CC-16 Dri-Splice. The simple design consists of a PVC body with rubber seals on each end. The drop cable is simply placed through each rubber seal and the seals are then pushed onto the plastic body to form a secure, watertight seal. For RG6/59 only. Individually Packaged.

B - 4422-UDSP Splice Sealant B - Splice Sealant Bulk Pack

100% Underground Drop Sealant PadsGuaranteed for 20 Years!The Fastest and Easiest Underground Drop Repair Splice in the World!


A 34500K CC-16 Dri-Splice 4”L x 1.1875”D Each

B 34401K 4425-UDSP Splice Sealant Individual Pads .125” x 3.75” x 2” 50/Bag

B 34403K 4422-UDSP Splice Sealant Individual Pads .125” x 3.375” x 2” 1/Bag

B 34402K 4421-UDSP Splice Sealant Individual Pads For RG6/59 Cable - 1/Bag

63

SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE



A 34201K 12615-CR Potting Kit - Each

B 34300K 4000-DT Dri-Tap For 0.500 Cable 6.5” Diameter Each

B 34301K 4750-DT Dri-Tap For 0.750 Cable 6.5” Diameter Each

B 34302 4024-RT Replacement Bag 6.5” x 28” Each

Features & Benefits• Installs on existing plant connections without having to undo the connections• Stops incursion of water• Stops corrosion• Re-enterable• Reliable• Complete kit includes potting bag and 1,500 grams of encaspulant

Features & Benefits• The Dri-Tap is constructed of many field-tested, top grade materials, which have been in service in cable systems for many years with 100% service ability• The Dri-Tap bag is made of double polished clear vinyl PVC, temperature rated from 180°F to -20°F• The base is made of ABS plastic and the rubber grommet and bands are made from neoprene rubber with a built in ozone retardant• The carriage bolt and T-Bolt band chain are made of 100% stainless steel for many years of service and reliability• The Dri-Tap is designed for flush grade installations in vaults where water tables, rain, and snow falls can fill up vaults and flood out passives • The rubber grommet holds up to eight RG6 drop cables for installation with taps and passives• Unlike the hard clear or green dome style underground housings, the Dri-Tap uses the clear poly bag design to squeeze the moisture and air out of the housing

Dri-TapFor Broadband and Telephony Applications

A

B

HARDLINE SPLICE REPAIR

The 12615-CR KitRe-Enterable Directional Tap & Directional Coupler Urethane Potting Kit

SEC

TIO

N 6

SEC

UR

ITY

SEA

LS &

DR

OP

IN

STA

LLA

TIO

N H

AR

DW

AR

E


PREP TOOLS

Fiber Prep CleanerHigh Gel Re-Enterable Encapsulant

Features & Benefits• Stop incursion of water/moisture• Resistant to high alkaline soil• Installs in just 15 minutes• Five times as reliable as heat shrink or mechanical devices• Kit comes complete with rigid clear plastic body, two adjustable end caps, and 750g of encapsulant• Hole on the adjustable end cap is sized for 0.412” - 0.500” cables• Cut cap back as needed for larger size cable 0.625” - 1.00”• 15 Year Pro-Rated Warranty

• Multilink’s F-Seal was developed to maintain an internal seal against signal leakage from F-Connectors• And no matter what brand of connector you are using, you must be able to seal the internal threads against the incursion of moisture, pollution, and other unpredictable weather conditions• With a single drop of F-Seal on the thread port you will be able to maintain a more secure and a longer lasting seal than with silicone grease (Please note that the signal contact is made with the F-Connector post and not the threads)• F-Seal is especially compounded to remain permanently elastic, even under extreme weather conditions• F-Seal works effectively in temperatures ranging from -40°F to 400°F. Along with Multilink’s Torque Wrench and a simple Weather Boot, you can ensure that you have the best seal possible at the absolute lowest cost • F-Seal already has a proven track record that literally goes above and beyond the Cable TV industry standard• F-Seal is derived from a compound that was used on the Space Shuttle to seal fittings, which proves that it can certainly meet any earthbound standard!• Note: All above come with twist cap and squeezable bottle


A 34200K 126-CR Potting Kit 12” Each

B 38220K 5520-FS F-Seal 2 Fl Oz Each

- 38260K 5560-FS F-Seal 4 Fl Oz Each

- 38270K 5570-FS F-Seal 8 Fl Oz Each

Features & Benefits• Teflon filled thread sealing• High temperature resistance• Non-galling, non-seizing, and non-toxic• Extreme resistance to rust and corrosion • Non-corrosive to metals• Non-staining

B

A

F-SealThread Sealant

65

SECTIO

N 6

SECU

RIT

Y SEA

LS &D

RO

P IN

STALLA

TION

HA

RD

WA

RE


PLASTIC & STEEL INSTALLATION PRODUCTSSECTION 7

Architectural and decorative Molding/Raceway Systems forinterior and exterior installation of broadband wires.

Molding and Raceway System manufacturing up to 1” bendradius to meet the growing needs of fiber installations.

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


A Great Way To Display Multilink Architectural Raceway

Point-Of-Purchase Display Available From Multilink.Increase Awareness Of Your Raceway Products,

Call Customer Service For more Information.

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


Features• Large Capacity Raceway• Route Power and Communications Cabling Simultaneously• Aesthetically Pleasing Design• Meets TIA Minimum Requirements for Bend Radius• UL Listed

POWER RACEWAYArchitectural Multichannel 4”

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Features and Benefits• Large Capacity Raceway• Route Power and Communications Cabling Simultaneously• Aesthetically Pleasing Design• Meets TIA Minimum Requirements for Bend Radius• Power Rated to 600V (UL)

Data Installation Power Installation

69

POWER RACEWAYArchitectural Multichannel 4”Power & Data Installation

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


MRM 400-XX-T Base and Cover MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with one divider in center

MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with two dividers

MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with three dividers

MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with one divider on the left side only

MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with one divder on the right side only

POWER RACEWAYArchitectural Multichannel 4”6 different modular designs allow for greater flexibility in one raceway systemCategory 5, 5E and 6 1” Bend Radius Compliant

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


RACEWAYMultilink Power Rated Raceway SystemCategory 5, 5E and 6 1” Bend Radius Compliant


A MRM400-XX-T 4” Multichannel UL Listed Power Raceway Base And Cover Included 4.051”W x 1.75”H x 8’L 64’ /Ctn

B MRM400-C-XX 4” Multichannel Raceway Cover Only 2.75”W x8’L 64’ /Ctn

C MRM400-D-XX 4” Universal Divider For 4” Multichannel Raceway 1.55”H x 8’L 64’ /Ctn

D MRF400-PB-XX Power Box For 4” Multichannel Raceway 4”L x 2”W x 1-3/8”D Each

E MRF400-DB-XX Data Box For 4” Multichannel Raceway 4”L x 2”W x 3/4”W Each

F MRF400-FER-XX Flat Elbow For 4” Multichannel Raceway 4” Each

Standard colors are Ivory, White and Office White. Replace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings). Call Customer Service for more information

Base & Cover sold together

A B C

D E F SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


RACEWAYMultilink Power Rated Raceway SystemCategory 5, 5E and 6 1” Bend Radius CompliantPower Raceway Fittings


A MRF400-ICR-XX Inside Corner For 4” Multichannel Raceway 4” 0.40 Lbs Each

B MRF400-EC-XX End Cap For 4” Multichannel Raceway 4” 0.10 Lbs Each

C MRF400-OCR-XX Outside Corner For 4” Multichannel Raceway 4” 0.45 Lbs Each

D MRF400-TBT-XX Transition Box For 4” Multichannel Raceway 4” 0.45 Lbs Each

E MRF400-WR-XX Wire Retainer For 4” Multichannel Raceway 4” 0.05 Lbs Each

F MRF400-JC-XX Joint Cover / Seam Cover For 4” Multichannel Raceway 4” 0.05 Lbs Each

Transitions to MRM17 Series Raceway

A B C

D E F

Standard colors are Ivory, White and Office White. Replace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings). Call Customer Service for more information

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


RACEWAYArchitectural Wave Cove Raceway SystemsFast Mounting and Attractively Blends into the Ceiling

Features• Architectural Wave Cove Raceway holds category 5 cables to a 1” bend radius thus maintaining end to end connectivity, even when filled to capacity or pulled through the raceway • The Raceway is available with an adhesive back for fast and easy installation • Aesthetically blends with drop ceilings• Efficient for moves, adds and changes• No need to move furniture

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


RACEWAY Architectural Plastic Wave Molding For Interior Use Only6 different modular designs allow for greater flexibility in one raceway systemCategory 5, 5E and 6 1” Bend Radius Compliant

Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information

A A B B

C C D E


A 84125-W-XX Wave Molding 2.5” x 8’ 240’ /ctn

A 84125-W-AB-XX Wave W/ Adhesive Backing 2.5” x 8’ 240’ /ctn



A 84140-W-XX Wave Molding Fittings Must Be Miter Cut 4” x 8’ 96’ /ctn

B MCF25-IR-XX Inside Radius Fitting 2.5” Each

B 84125-IEW-XX Wave Inside Elbow 2.5” Each

B 84130-IEWL-XX Wave Inside Elbow 2.75” Each

B 84175-IEW-XX Wave Inside Elbow 3.5” Each

C MCF26-OR-XX Outside Radius Fitting 2.5” Each

C 84125-OEW-XX Wave Outside Elbow 2.5” Each

C 84130-OEWL-XX Wave Outside Elbow 2.75” Each

C 84175-OEW-XX Wave Outside Elbow 3.5” Each

D 84125-CW-XX Wave End Cap 2.75” Each



E MCF27-T-XX Tee Fitting 2.5” Each

- 84125-WH-XX Wave Hinge Molding 2.5” x 8’ 120’ / Ctn

- 84125-WH-AB-XX Wave Hinge Molding W/ Adhesive Backing 2.5” x 8’ 120’ / Ctn

Lance Option Available

74

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Lance Option AvailableA

A B

C

D

E


A 84108-VM-XX Cove Molding 2.0625” x 8’ 320’ / Ctn

A 84108-HVM-XX Hinged Cove Molding 2.0625” x 8’ 224’ / Ctn

A 84125-VM-XX Cove Molding 2.75” x 8’ 240’ / Ctn

B MCF25-IR-XX Inside Radius Fitting - Each

B 84106-IEVL-XX Cove Inside Elbow 2.0625” x 6” Each

B 84125-IEVL-XX Cove Inside Elbow 2.75” x 6” Each

C MCF26-OR-XX Outside Radius Fitting - Each

C 84107-OEVL-XX Cove Outer Elbow 2.0625” Each

C 84125-OEVL-XX Cove Outer Elbow 2.75” Each

D 84108-CV-XX Cove End Cap 2.0625” x 8” Each

D 84101-CV-XX Cove End Cap 1” x 8” Each

D 84125-CV-XX Cove End Cap 2.75” x 8” Each

E 84020-FDS-XX 2 Piece Finger Drop Splice With Adhesive Backing 8” x .5” Each

Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation Custom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information

75

RACEWAY Cove MoldingCategory 5, 5E and 6 1” Bend Radius Compliant

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


LATCH DUCT RACEWAY Architectural Latch Duct RacewayCategory 5, 5E and 6 1” Bend Radius Compliant - Available in our Standard Version

Features• Fast Mounting One Piece Design• Architectural MutiRaceway holds communication cables to a 1 inch bend radius, thus maintaining end to end connectivity even when filled to capacity or pulled through the raceway • The one piece design constructed of 94V-0 rigid vinyl features a highly flexible hinge and self-locking latch• This can be easily accessed as many times as necessary without stress cracking or discoloration UL Listed Material

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Features & Benefits• The MRM Series Latch Duct Raceway is an adhesive backed, highly flexible, one piece design that installs quickly and easily• All fittings incorporate a minimum of 1” bend radius, thus maintaining end to end connectivity even when filled to capacity or pulled through raceway.


A MRM75-XX-T Pre-Adhesive Backed Latch Duct Raceway .75”W x .5”H x 6’L 9 Lbs / Ctn 120’ / Ctn

B MRM12-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.25”W x .75”H x 6’L 23 Lbs / Ctn 120’ / Ctn

C MRM17-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.75” x 1”H x 6’L 33 Lbs / Ctn 120’ / Ctn

77

Packed 120 ft. per cartonStandard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information

A B C

A-C

LATCH DUCT RACEWAY Multilink Latch Duct MultiRacewayCategory 5, 5E and 6 1” Bend Radius Compliant

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


Features & Benefits• The MultiClear Raceway encompasses a flexible vinyl base to hold and secure cable • The cover can be removed without disrupting the cabling • This two piece design has a clear base and solid covers available in our standard raceway colors of Ivory, White, and Office White• The line is compatible with the fittings on the following pages


A MRC75-XX-T Pre-Adhesive Backed Latch Duct Raceway .75”W x .5”H x 6’L 17 Lbs / Ctn 120’ / Ctn

B MRC12-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.25”W x .75”H x 6’L 32 Lbs / Ctn 120’ / Ctn

C MRC17-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.75” x 1”H x 6’L 45 Lbs / Ctn 120’ / Ctn

Packed 120 ft. per cartonStandard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information

78

A B C

A-C

RACEWAY MutliClear Surface RacewayCategory 5, 5E and 6 1” Bend Radius Compliant

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation

79

A B C D

E F G H


A MRF75-ICR-XX Inside Corner Fitting For MRM75 And MRC75 .75” 0.40 Lbs / Pk 10 / Pk

A MRF12-ICR-XX Inside Corner Fitting For MRM12 And MRC12 1.25” 0.60 Lbs / Pk 10 / Pk

A MRF17-ICR-XX Inside Corner Fitting For MRM17 And MRC17 1.754” 0.80 Lbs / Pk 10 / Pk

B MRF75-OCR-XX Outside Corner Fitting For MRM75 And MRC75 3/4” 0.50 Lbs / Pk 10 / Pk

B MRF12-OCR-XX Outside Corner Fitting For MRM12 And MRC12 1.254” 0.70 Lbs / Pk 10 / Pk

B MRF17-OCR-XX Outside Corner Fitting For MRM17 And MRC17 1-3/4” 1.00 Lbs / Pk 10 / Pk

C MRF75-FER-XX Flat Elbow Fitting For MRM75 And MRC75 .75” 0.60 Lbs / Pk 10 / Pk

C MRF12-FER-XX Flat Elbow Fitting For MRM12 And MRC12 1.25” 0.80 Lbs / Pk 10 / Pk

C MRF17-FER-XX Flat Elbow Fitting For MRM17 And MRC17 1.75” 1.00 Lbs / Pk 10 / Pk

D MRF75-TRT-XX Tee Fitting For MRM75 And MRC75 .75” 0.70 Lbs / Pk 10 /pk

D MRF12-TRT-XX Tee Fitting For MRM12 And MRC12 1.25” 1.00 Lbs / Pk 10 / Pk

D MRF17-TRT-XX Tee Fitting For MRM17 And MRC17 1.75” 1.30 Lbs / Pk 10 / Pk

E MRF75-JC-XX Joint Cover Fitting For MRM75 And MRC75 .75” 0.20 Lbs / Pk 10 / Pk

E MRF12-JC-XX Joint Cover Fitting For MRM12 And MRC12 1.25” 0.30 Lbs / Pk 10 / Pk

E MRF17-JC-XX Joint Cover Fitting For MRM17 And MRC17 1.75” 0.30 Lbs / Pk 10 / Pk

F MRF12-R75-XX Reducer Fitting (Reduces From 1.25” to .75”) 1.25” to .75” 0.40 Lbs / Pk 10 / Pk

F MRF17-R75-XX Reducer Fitting (Reduces From 1.75” to .75”) 1.75” to .75” 0.20 Lbs / Pk 10 / Pk

F MRF17-R12-XX Reducer Fitting (Reduces From 1.75” To 1.25”) 1.75” to 1.25” 0.30 Lbs / Pk 10 / Pk

G MRF75-EC-XX End Cap Fitting For MRM75 And MRC75 .75” 0.10 Lbs / Pk 10 / Pk

G MRF12-EC-XX End Cap Fitting For MRM12 And MRC12 1.25” 0.10 Lbs / Pk 10 / Pk

G MRF17-EC-XX End Cap Fitting For MRM17 And MRC17 1.75” 0.20 Lbs / Pk 10 / Pk

H MRF75-CE-XX Ceiling Entry Fitting For MRM75 And MRC75 .75” 0.30 Lbs / Pk 10 / Pk

H MRF12-CE-XX Ceiling Entry Fitting For MRM12 And MRC12 1.25” 0.40 Lbs / Pk 10 / Pk

H MRF17-CE-XX Ceiling Entry Fitting For MRM17 And MRC17 1.75” 0.50 Lbs / Pk 10 / Pk

RACEWAY Architectural Raceway Fittings for MRM & MRC Series MoldingCategory 5, 5E and 6 1” Bend Radius Compliant

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS



A MRFUV-WE-XX Wall Entry Fitting For All Sizes Of MRM And MRC - 1.60 Lbs Each

B MJB-1-XX Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 Lbs Each

C MJB-2-XX Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 Lbs Each

D MWP-13-XX Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” 0.10 Lbs Each

E MWP-16-XX Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” 0.10 Lbs Each


80

A

B C

D E

RACEWAY Architectural Raceway Fittings for MRM & MRC Series MoldingCategory 5, 5E and 6 1” Bend Radius Compliant

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


RACEWAY Multilink Raceway Cross Reference ChartCategory 5, 5E and 6 1” Bend Radius Compliant

Multilink Description Panduit Part# Wiremold Part# Tyton Part# Dek Part#

MRM17 1.75" raceway; 6' L LD10 2900 TSR3-6A 042-LD00

MRF17-JC 1.75" seam or joint cover CF10 2906 TSR3-14 042-0015

MRF17-TRT (includes base & cover) 1.75" tee fitting TFC10 2915 TSR3-21-1 042-0021

MRF17-FER (includes base & cover) 1.75" elbow fitting RAFC10 2911 TSR3-25-1 042-0025

MRF17-OCR (includes base & cover) 1.75" outside corner OCFX10 2918 TSR3-29-1 042-0029

MRF17-ICR (includes base & cover) 1.75" inside corner ICFC10 2917 TSR3-33-1 042-0033

MRF17-EC 1.75" end cap ECF10 2910B TSR3-36 042-0036

MRF17-R7 1.75" - 1.25" reducer RF10X5 2989A TSR1-12 042-0036H

MRF17-CE 1.75" ceiling drop DCF10 2986 TSR3-50 042-0050

MRM12 1.25" raceway; 6' L LD5 2800 TSR2-6A N/A

MRF12-JC 1.25" seam or joint cover CF5 2806 TSR2-14 N/A

MRF12-TRT (includes base & cover) 1.25" tee fitting TFC5 2815 TSR2-21-1 N/A

MRF12-FER (includes base & cover) 1.25" elbow fitting RAFC5 2811 TSR2-25-1 N/A

MRF12-OCR (includes base & cover) 1.25" outside corner OCFX5 2818 TSR2-29-1 N/A

MRF12-ICR (includes base & cover) 1.25" inside corner ICFC5 2817 TSR2-33-1 N/A

MRF12-EC 1.25" end cap ECF5 2810B TSR2-36 N/A

MRF12-R7 1.75" - .75" reducer RF10X3 2879A TSR2-12 N/A

MRF12-CE 1.25" ceiling drop DCF10 2886 TSR3-50 N/A

MRM75 .75" raceway; 6' L LD3 2700 TSR1-6A 043-LD00

MRF75-JC .75" seam or joint cover CF3 2706 TSR1-14 043-0015

MRF75-TRT (includes base & cover) .75" tee fitting TFC3 2715 TSR1-21-1 043-0021

MRF75-FER (includes base & cover) .75" elbow fitting RAFC3 2711 TSR1-25-1 043-0025

MRF75-OCR (includes base & cover) .75" outside corner OCFX3 2718 TSR1-29-1 043-0029

MRF75-ICR (includes base & cover) .75" inside corner ICFC3 2717 TSR1-33-1 043-0033

MRF75-EC .75" end cap ECF3 2710B TSR1-36 043-0036

MRF75-R7 1.25" - 3/4" reducer RF5X3 - TSR3-12 -

MRF75-CE .75" ceiling drop DCF13 2786 TSR1-50 043-0050

Power Raceway Systems

MRM400 (includes base and cover) 4" Multichannel; 8' L T70B 5400TB MCRX-B8 N/A

MRM400-C Cover for 4" raceway T70C 54000C MCRX-C N/A

MRM400-D Divider for 4" raceway T70D N/A MCRW-SD N/A

MRF400-DB Data Box for 4" raceway T70DB CM-EPLA MCRX-CDB N/A

MRF400-PB Power Box for 4" raceway T70HB 5450-T MCRX-EDB N/A

MRF400-FER Flat Elbow for 4" raceway T70RA 5411FO MCRX-FE N/A

MRF400-ICR Inside Corner 4" raceway T70IC 5417FO MCRX-IE N/A

MRF400-EC End Cap for 4" raceway T70EC 5410 MCRX-EC N/A

MRF400-OCR Outside Corner 4" raceway T70OCR 5418FO MCRX-EE N/A

MRF400-TBT Transition Box 4" raceway T70T 5415FO MCRX-TF N/A

MRF400-WR Wire Retainer 4" raceway T70WR 5400TWC MCRG-WR N/A

MRF400-JC Joint Cover 4" raceway T70BC 5406A MCRX-BS N/A

Not Needed Base Splice Cover T70CC 5406T MCRX-CS N/A

Call Customer Service if the style you are interested in is not listed

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


RACEWAY MRM Series Raceway Fill Chart

MRM 75 MRM12 MRM17

Wire Type Size Diameter 40% MAX 40% MAX 40% MAX

Coax RG6/U 0.27 1 2 4 8 9 16

RG59/U 0.242 1 2 5 10 12 20

RG62/U 0.242 1 2 5 10 12 20

RG58/U 0.193 3 5 9 15 18 30

Twisted Pair 2 pr 0.14 5 10 17 30 35 60

24 AWG 3 pr 0.15 4 8 15 25 31 50

Unshielded 4 pr 5E 0.217 2 4 7 12 14 25

4 pr 6 0.24 1 2 5 10 12 20

25 pr 0.41 0 1 2 4 4 7

Fiber Optic 2 strand 0.175 3 6 11 18 23 36

FA Jacket 4 strand 0.185 3 5 10 16 20 32

OFNP 6 strand 0.21 2 4 7 12 15 25

Electrical 14 AWG 0.105 7 10 14

12AWG 0.122 5 8 11

10AWG 0.153 3 5 6

40% - Column follows the guidelines of EIA/TIA for cable fill allowing for additions after installMAX - Marketing recommended maximum fill based on bend radius and internal cabling areaNote - UL material used in MRM series raceway manufacturingProduct not currently UL listed

MRM75 MRM12 MRM17

84125-W 84140-CR MRM400

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Features & Benefits• These plates feature unique protrusion and indentation that protects cable/wiring and/or connectors from contact with furniture, TVs, or other household appliances that are routinely placed close to the wall• Perfectly suited for both CATV and LAN applications• Recommended for residential and institutional applications• Protect your investment and avoid costly repair calls• Perfect for college dorm rooms, offices, and in the home• Can be customized to fit any size connector or cable


83

RACEWAY Protruding and Recessed Wall Plates High Impact Plastic


A WP-2SP-XX Protruding Wall Plate W/ Dual Knockouts Each

B WP-1SR-XX Recessed Wall Plate Each

C SWWICT Ivory Protruding Wall Plate For Mod Jack And F81 Each

- SWWWCT White Protruding Wall Plate For Mod Jack And F81 Each

D E F


D 84512-SWB 2 Piece Wall Plate Box 4.5” x 2.5” x 1” Each

E 84430-SWB Wall Plate Box / Junction Box With Full Backing 4.5” x 2.5” x 1” Each

F 84412-SWB Wall Plate Box / Junction Box 4.5” x 2.5” x 1” Each

A B C C

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS



84

RACEWAY Ultra High Security Locking Molding 2-Piece Lock Molding3” bend radius meets coax drop cable return path bend radius standards

A B C D

E F G H


A MRL20-XX Lock Molding Top/bottom Exterior Grade 2”W x .36”H x 8’L 160’ / Ctn

A MRL10-XX Lock Molding Top/bottom Exterior Grade .75”W x .18125”H x 8’L 360’ / Ctn

B MRF25-ICR-XX Inside Corner Fitting (Cover And Base Included) 2” Each

B MRF34-IC-XX Inside Corner Fitting (Cover Only) .75” Each

C MRF25-OCR-XX Outside Corner Fitting (Cover And Base Included) 2” Each

C MRF34-OCR-XX Outside Corner Fitting (Cover And Base Included) .75” Each

D MRF25-FER-XX Flat Elbow Fitting (Cover And Base Included) 2” Each

D MRF34-FER-XX Flat Elbow Fitting (Cover And Base Included) .75” Each

E MRF25-SC-XX Seam Cover Fitting 2” Each

E MRF34-SC-XX Seam Cover Fitting .75” Each

F MRF25-EC-XX End Cap Fitting 2” Each

F MRF34-EC-XX End Cap Fitting .75” Each

G MRF234-RD-XX Reducer Fitting 2” to .75” Each

H MRF25-TRT-XX Tee Fitting 2” Each

H MRF34-TRT-XX Tee Fitting .75” Each

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Heavy Wall U Flanged Guard KH Molding


A 86100-XRG 1” Heavy Wall U Flanged Guard Raceway 1” x 8’ 320’

A 86150-XRG 1.5” Heavy Wall U Flanged Guard Raceway 1.5” x 8’ 240’

A 86201-XRG 2” Heavy Wall U Flanged Guard Raceway 2” x 8’ 80’

B 84200-SQ Molding Cover Only 2” x 1” x 8’ 8’

B 84200-SQ Molding Base Only 2” x 1” x 8’ 8’

B 84220-SQ Molding Cover Only 2” x 2” x 8’ 8’

B 84220-SQ Molding Base Only 2” x 2” x 8’ 8’

B 84150-SQ Molding Cover Only 1.5” x 1” 8’

B 84150-SQ Molding Base Only 1.5” x 1” 8’

B 84300-SQ Ex Molding Cover Only 3” x 2” 8’

B 84300-SQ Ex Molding Base Only 3” x 2” 8’

A B

Available by special order only Available in Exterior Ivory

85

RACEWAY

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


Standard colors are Beige and WhiteReplace XX with B or W for color designation

86

A-B C D E

F G H I-J


A 84180-HM-2-XX Flat Wave Hinge Molding 2” x 8” 144’ / Ctn

B 84180-CMA-XX Flat Wave Track Molding 2” x 8” 144’ / Ctn

C 84186-IEHM Inside Elbow Fitting 2” Each

D 84187-OEHM Outside Elbow Fitting 2” Each

E 84129-F45 45 Degree Corner Fitting 2” Each

F 84129-F50 50 Degree Corner Fitting 2” Each

G 84183-ECH End Cap Fitting 2” Each

H 84184-FEHM Flat Elbow Fitting 2” Each

I 84201-MB Mounting Bracket 2” x 6” Each

J 84200-MBL Full Length Backing 2” x 8” Each

RACEWAY Non-Metallic Architectural Flat Wave Hinged and Track Moldings

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


Full Length Backing Track Molding Riser Guard And Mounting Strap

A B C


A 84020-FLB-CM .5” Full Length Backing Plastic Track Molding .5”H x .5”W x 8’L 504’ / Ctn

- 84030-FLB-CM .84375” Full Length Backing Plastic Track Molding .84375”H x .875”W x 8’L 480’ / Ctn

- 84120-FLB-CM 1.25” Full Length Backing Plastic Track Molding 1.25”H x 1.3125”W x 8’L 364’ / Ctn

- 84020-CM-AB .5” Adhesive Back Full Length Backing Plastic Track Molding .5”H x .5”W x8’L 504’ / Ctn

- 84030-CM-AB .84375” Adhesive Back Full Length Backing Plastic Track Molding .84375” x .875”W x 8’L 480’/ Ctn

- 84120-CM-AB 1.25” Adhesive Back Full Length Backing Plastic Track Molding 1.25”H x 1.3125”W x 8’L 364’ / Ctn

B 84020-CM/RG .5” Riser Guard Molding .5” x .5”W x 8’L 504’ / Ctn

- 84030-CM/RG .84375” Riser Guard Molding .84375”H x .875”W x 8’L 480’ / Ctn

- 84120-CM/RG 1-1/4” Riser Guard Molding 1.25”H x 1.3125”W x 8’L 364’ / Ctn

- 84200-CM/RG 2” Riser Guard Molding 2”H x 2.5”W x 8’L 192’ / Ctn

- 84300-CM/RG 3.25” Riser Guard Molding 3.25”H x 3.25”W x 8’L 48’ / Ctn

C 84021-MS .5” Mounting Strap For Riser Guard Molding .546875”H x .5”W x 1.5”L Each

- 84031-MS .75” Mounting Strap For Riser Guard Molding .84375”H x 1.3125”W x 1.5”L Each

- 84121-MS 1.25” Mounting Strap For Riser Guard Molding 1.25”H x .875”W x 1.5”L Each

- 84201-MS 2” Mounting Strap For Riser Guard Molding 2”H x .625”W x 1.5”L Each

- 84301-MS 3” Mounting Strap For Riser Guard Molding 3.25”H x 3.25”W x 1.5”L Each

Custom colors available on molding for a minimum run of 3,000 ft. (500 pieces for fittings)Call Customer Service for more information

Features & Benefits• Full Length Backing Track Molding (also available with Adhesive Full Length Backing for interior use only) uses the same molding cover and fittings as the High Security Track Molding• The full length backing is easy to install on irregular or bumpy wall surfaces• Standard colors are beige, brown and brick red• Custom colors available with orders of 3,000 ft or more

Features & Benefits• Both the Riser Guard and Mounting Strap are made from UL Listed PVC materials• Two mounting straps for every four feet of riser guard are recommended • The mounting strap concept allows the installer to slide the strap into the position needed unlike any other riser guards in that it has the handy side flange that locks into one position• Like mounting brackets, the mounting straps allow the riser guard to expand and contract in changing weather conditions• Standard colors are beige, brown and brick red • Custom colors available with orders of 3,000 ft or more

87

RACEWAY

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS



A 84026-IE Inside Elbow Fitting For Flat Box Molding .5” Each

A 84036-IE Inside Elbow Fitting For Flat Box Molding .75” Each

A 84126-IE Inside Elbow Fitting For Flat Box Molding 1.25” Each

A 84206-IE Inside Elbow Fitting For Flat Box Molding 2” Each

B 84027-OE Outside Elbow Fitting For Flat Box Molding .5” Each

B 84037-OE Outside Elbow Fitting For Flat Box Molding .75” Each

B 84127-OE Outside Elbow Fitting For Flat Box Molding 1.25” Each

B 84207-OE Outside Elbow Fitting For Flat Box Molding 2” Each

C 84024-FE Flat Elbow Fitting For Flat Box Molding .5” Each

C 84034-FE Flat Elbow Fitting For Flat Box Molding .75” Each

C 84124-FE Flat Elbow Fitting For Flat Box Molding 1.25” Each

C 84204-FE Flat Elbow Fitting For Flat Box Molding 2” Each

D 84023-C End Cap Fitting .5” Each

D 84033-C End Cap Fitting .75” Each

D 84123-C End Cap Fitting 1-1/4” Each

D 84203-C End Cap Fitting 2” Each

E 84209-12-T Tee Reducer 2” x 1.25” x .5” Each

A B C

D E

Standard colors are Beige and White

RACEWAY Fittings and Accessories for Olympic Plastic Molding

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


RACEWAY Fittings and Accessories for Olympic Plastic Molding


A 84032-DSC Drop Splice Fitting .75”W x 12”L Each

A 84122-DSC Drop Splice Fitting 1.25”W x 12”L Each

A 84222-DSC Drop Splice Fitting 2”W x 12”L Each

B 84022-SC Seam Cover / Joint Cover Fitting .5” x 1.5” Each

B 84032-SC Seam Cover / Joint Cover Fitting .75” x 1.5” Each

B 84122-SC Seam Cover / Joint Cover Fitting 1.25” x 1.5” Each

B 84202-SC Seam Cover / Joint Cover Fitting 2” x 1.5” Each

B 84302-SC Seam Cover / Joint Cover Fitting 3” x 1.5” Each

C B-16000 Quick Dry Weld In A Tube - Each

D 8450-ATR Double Sided Adhesive Backing .5” x 216’ Each

D 8451-ATR Double Sided Adhesive Backing .875” x 216’ Each

Standard colors are Beige, Brown and Brick RedCustom colors available on molding for a minimum run of 3,000 ft. (500 pieces for fittings)Call Customer Service for more information

A B C D

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS



A 84140-FBMH Flat Box Molding 2”W x .75”H x 8’L 192 / Ctn

A 84180-FBMH Flat Box Molding 2”W x 1.25”H x 8’L 144’ / Ctn

A 84200-FBMH Flat Box Molding 2”W x 2”H x 8’L 64’ / Ctn

A 84242-FBMH Flat Box Molding 2.125”W x 2.5”H x 8’L 64’ / Ctn

B 84146-IE/FBM Inside Elbow .75” x 2” x 8” Each

B 84186-IE/FBM Inside Elbow 1.25” x 2” x 8” Each

B 84206-IE/FBM Inside Elbow 2” x 2” x 8” Each

C 84147-OE/FBM Outside Elbow .75” x 2” x 8” Each

C 84187-OE/FBM Outside Elbow 1.25” x 2” x 8” Each

C 84207-OE/FBM Outside Elbow 2” x 2” x 8” Each

D 84144-FE/FBM Flat 90 Degree Elbow .75” x 2” Each

D 84184-FE/FBM Flat 90 Degree Elbow 1.25” x 2” Each

D 84204-FE/FBM Flat 90 Degree Elbow 2” x 2” Each

Standard colors are Ivory, White and Office WhiteAdd I, W or OW for color designation

A B C D

RACEWAY Flat Box MoldingFlat Box is a two piece molding with a snap-on cover that is easy to re-enter The special V-shaped grooves in the cover allow for a tighter, more secure fit to the base

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


STEEL RACEWAY Olympic High Security Steel Molding


A 84030-CMM .75” Olympic High Security Steel Molding .5” x 1” x 1” x 8’ 224’ / Ctn

A 84120-CMM 1.25” Olympic High Security Steel Molding 1.21875” x 1” x 1.875” x 8’ 224’ / Ctn

A 84200-CMM 2” Olympic High Security Steel Molding 2” x 1” x 3” x 8’ 192’ / Ctn

A 84300-CMM 3” Olympic High Security Steel Molding 2.234375” x 2” x 3” x 8’ 96’ / Ctn

B 84032-MB Mounting Bracket For Use With 84030-CMM Molding 5” Each




C 84030-MBL High Security Full Length Backing For Use With 84030-CMM Molding .75” x 8’ 8’

C 84120-MBL High Security Full Length Backing For Use With 84120-CMM Molding 1.25” x 8’ 8’

C 84200-MBL High Security Full Length Backing For Use With 84200-CMM Molding 2” x 8’ 8’

C 84300-MBL High Security Full Length Backing For Use With 84300-CMM Molding 3” x 8’ 8’

A B C

Features• .5” flanges on each side• Mounting hole punch every two feet• Great for where high security protection is required• Ideal for uneven mounting surfaces

Benefits• New Tuff Top Coating 10 Year Warranty 26 Gauge Galvanized Steel• Track Molding Olympic High Security Track Molding snaps over full length backing or mounting brackets• Standard Colors White, Beige, Brown and Brick Red• Category 5, 5E and 6 1” Bend Radius Compliant• Attach steel moldings to practically any surface with easy-to-use mounting brackets• Simply mount brackets, attach cable to brackets with tie-wraps, and snap molding onto the brackets• SA minimum of one clip for every four feet of molding is recommended

Standard colors are Beige, White, Dark Brown and Dark Red.

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


A B C

D E


A 84036-IEM Inside Elbow Fitting 75” 0.07 Lbs Each

A 84126-IEM Inside Elbow Fitting 1.25” 0.14 Lbs Each



B 84033-ECM End Cap Fitting 3/4” 0.07 Lbs Each

B 84123-ECM End Cap Fitting 1.25” 0.10 Lbs Each

B 84203-ECM End Cap Fitting 2” 0.15 Lbs Each

B 84303-ECM End Cap Fitting 3” 0.30 Lbs Each

C 84030-JBM Bell Flange Fitting .75” x 6” x 4” 0.29 Lbs Each

C 84120-JBM Bell Flange Fitting 1.25” x 6” x 4” 0.33 Lbs Each

C 84200-JBM Bell Flange Fitting 2” x 6” x 4” 0.34 Lbs Each

C 84300-JBM Bell Flange Fitting 3” x 6” x 4” 0.50 Lbs Each

D 84037-OEM Outside Elbow Fitting .75” 0.11 Lbs Each

D 84127-OEM Outside Elbow Fitting 1.25” 0.19 Lbs Each

D 84207-OEM Outside Elbow Fitting 2” 0.21 Lbs Each

D 84307-OEM Outside Elbow Fitting 3” 0.45 Lbs Each

E 84038-TMB Tee Fitting .75” 0.11 Lbs Each

E 84128-TMB Tee Fitting 1.25” 0.35 Lbs Each

E 84208-TMB Tee Fitting 2” 0.36 Lbs Each

E 84308-TMB Tee Fitting 3” 0.72 Lbs Each

Standard colors are Beige, White, Dark Brown and Dark Red

STEEL RACEWAY Fittings and AccessoriesNew Tuff Top Coating for Olympic Steel Molding

SEC

TIO

N 7

PLA

STIC

& S

TEEL

INST

ALL

ATI

ON

PR

OD

UC

TS


C

STEEL RACEWAY Fittings and Accessories NewTuff Top Coating for Olympic Steel MoldingCategory 5, 5E and 6 1” Bend Radius Compliant

A B

D E F


A 84034-FEMB Flat 90 Degree Elbow Fitting .75” 0.16 Lbs Each

A 84124-FEMB Flat 90 Degree Elbow Fitting 1.25” 0.30 Lbs Each

A 84204-FEMB Flat 90 Degree Elbow Fitting 2” 0.37 Lbs Each

A 84304-FEMB Flat 90 Degree Elbow Fitting 3” 0.49 Lbs Each

B 84128-03-T Tee Reducer Fitting 1.25” x .75” 0.33 Lbs Each

B 84208-03-T Tee Reducer Fitting 2” x 1.25” 0.35 Lbs Each

B 84308-12-T Tee Reducer Fitting 3” x 1.25” 0.37 Lbs Each

C 84033-SCM Seam Cover Fitting .75” x 3” 0.07 Lbs Each

C 84122-SCM Seam Cover Fitting 1.75” x 3” 0.08 Lbs Each

C 84222-SCM Seam Cover Fitting 2” x 3” 0.10 Lbs Each

C 84302-SCM Seam Cover Fitting 3” x 3” 0.15 Lbs Each

D 84J251 Cutting Tool For Steel Molding - - Each

E 84002-ET Entry Tool For Molding - 0.05 Lbs Each

F 12716 Beige Touch Up Paint 13 oz 0.70 Lbs Each

F 12715 Brown Touch Up Paint 13 oz 0.70 Lbs Each

F 12717 Brick Red Touch Up Paint 13 oz 0.70 Lbs Each

F 12718 White Touch Up Paint 13 oz 0.70 Lbs Each

Standard colors are Beige, White, Dark Brown and Dark Red

SECTIO

N 7

PLA

STIC &

STEELIN

STALLA

TION

PR

OD

UC

TS


PLASTIC AND STEEL INSTALLATIONPRODUCTS FOR FIBER OPTIC CABLE

SECTION 8

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


FIBER OPTIC RACEWAYSteel Molding

A B CD

E

F

H

G

Steel Raceway Stock ID

Description Beige Brick Red Brown White Std. CRT Size UOM

84030-CMM 3/4” 20117 20119 20118 20115 224 ft Each

84120-CMM 1-1/4” 20137 20139 20138 20136 224 ft Each

84200-CMM 2” 20167 20169 20168 20171 192 ft Each

84300-CMM 3” 20194 20195 20196 20197 96 ft Each

Full Length Metal Backing

Stock ID Description Std. CRT Size UOM

25913 84030-MBL / Full length Metal Backing for3/4” Metal Molding

10/Pack Each

25933 84120-MBL / Full Length Metal Backing for 1-1/4” Metal Molding

10/Pack Each

25993 84200-MBL / Full Length Metal Backing for2” Metal Molding

10/Pack Each

25934 84300-MBL / Full Length Metal Backing for3” Metal Molding

10/Pack Each

5” Long Mounting Brackets

Stock ID Description Std. CRT Size UOM

25912 84032-MB / 3/4’ Mounting Brackets 224 ft Each

25932 84122-MB / 1 1/4 Mounting Brackets 224 ft Each

25962 84205-MB / 2” Mounting Brackets 192 ft Each

25963 84306-MB / 3” Mounting Brackets 96 ft Each

Seam Covers Stock ID

Description Beige Brick Red Brown White Carton Qty UOM

84033-SCM 3/4” 25917 25919 25918 25920 10/Pack Each

84122-SCM 1-1/4” 25937 25939 25938 25940 10/Pack Each

84222-SCM 2” 25967 25969 25968 25961 10/Pack Each

84302-SCM 3” 25009 25008 25109 25007 10/Pack Each

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


FIBER OPTIC RACEWAYSteel Molding

Outside Corners Stock ID


87037-OEM 3/4” 25117 25119 25118 25326 10/Pack Each

84127-OEM2 1-1/4” 10-9303 10-9304 10-9302 10-9301 10/Pack Each

84207-OEM2 2” 10-9307 10-9308 10-9306 10-9305 10/Pack Each

84377-OEM 3” 25194 25195 25196 25002 10/Pack Each

Inside Corners Stock ID


84036-IEM 3/4” 25017 25019 25018 25323 10/Pack Each

84126-IEM2 1-1/4” 10-9295 10-9296 10-9294 10-9293 10/Pack Each

84206-IEM2 2” 10-9299 10-9300 10-9298 10-9297 10/Pack Each

84306-IEM 3” 25096 25095 25094 25001 10/Pack Each

End Cap Stock ID


84033-ECM 3/4” 25317 25319 25318 25332 10/Pack Each

84123-ECM 1-1/4” 25337 25339 25338 25333 10/Pack Each

84203-ECM 2” 25367 25369 25368 25334 10/Pack Each

84303-ECM 3” 25396 25395 25394 25005 10/Pack Each

Right Angles Stock ID


84034-FEMB 3/4” 25217 25219 25218 25329 10/Pack Each

84124-FEM2 1-1/4” 10-9278 10-9279 10-9277 10-9276 10/Pack Each

84204-FEM2 2” 10-9286 10-9287 10-9285 10-9284 10/Pack Each

84304-FEMB 3” 25294 25295 25296 25003 10/Pack Each

T Fitting Stock ID


84038-TMB 3/4” 25417 25419 25418 25420 10/Pack Each

84128-TMB2 1-1/4” 10-9282 10-9283 10-9281 10-9280 10/Pack Each

84208-TMB2 2” 10-9290 10-9291 10-9289 10-9288 10/Pack Each

84308-TMB 3” 25494 25495 25496 25006 10/Pack Each

Entry Hoof Stock ID


84123-ECM2 1-1/4” 10-9311 10-9312 10-9310 10-9309 10/Pack Each

84203-ECM2 2” 10-9315 10-9316 10-9314 10-9313 10/Pack Each

Bell Flanges Stock ID


84030-JBM 3/4” 25617 25619 25617 25321 10/Pack Each

84120-JBM 1-1/4” 25637 25639 25638 25636 10/Pack Each

84200-JBM 2” 25667 25669 25668 25322 10/Pack Each

84300-JBM 3” 25694 25695 25696 25004 10/Pack Each

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


STEEL RACEWAYFittings and AccessoriesNew Tuff Top Coating for Olympic Steel MoldingCategory 5, 5E & 6 - 1” Bend Radius Compliant

Stock ID Description Dimensions Weight Lbs. Carton Qty UOM

84034-FEMB Flat 90 Degree Elbow Fitting 3/4” 0.16 10/Pack Each

84124-FEMB Flat 90 Degree Elbow Fitting 1-1/4” 0.30 10/Pack Each

84204-FEMB Flat 90 Degree Elbow Fitting 2” 0.37 10/Pack Each

84304-FEMB Flat 90 Degree Elbow Fitting 3” 0.49 10/Pack Each


84128-03-T Tee Reducer Fitting 1-1/4” - 3/4” 0.33 10/Pack Each

84208-03-T Tee Reducer Fitting 2” - 1-1/4” 0.35 10/Pack Each

84308-03-T Tee Reducer Fitting 3” - 1-1/4” 0.37 10/Pack Each


84033-SCM Seam Cover Fitting 3/4” x 3” 0.07 10/Pack Each

84033-SCM Seam Cover Fitting 1-3/4” x 3” 0.08 10/Pack Each

84033-SCM Seam Cover Fitting 2” x 3” 0.10 10/Pack Each

84033-SCM Seam Cover Fitting 3” x 3” 0.15 10/Pack Each


84J1251 Cutting Tool For Steel Molding - - Each


84002-ET Entry Tool for Molding - 0.05 Each


12715 Brown Touch Up Paint - 0.70 Each

12715 Beige Touch Up Paint - 0.70 Each

12717 Brick Red Touch Up Paint - 0.70 Each

12718 White Touch Up Paint - 0.70 Each

Standard Colors are Beige, Brick Red, Brown & White

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


FIBER OPTIC RACEWAYCove Molding

Not Sold Separately

Not Sold Separately

Not Sold Separately

A

B

CD E

F

Part # Description UOM

A MCF27-TRT-XX T Fitting & Bend Radius for Cove Molding 10 / Pack

Stock ID Part # Description Color Std. CRT Size UOM

C 10-9361 84125-OERW-IV Outside Corner & Bend Radius for Cove Molding Ivory 10 Each

C 10-9362 84125-OERW-LW Outside Corner & Bend Radius for Cove Molding Linen White 10 Each


D 10-9359 84125-IERW-IV Inside Corner & Bend Radius for Cove Molding Ivory 10 Each

D 10-9471 84125-IERW-LW Inside Corner & Bend Radius for Cove Molding Linen White 10 Each


E 10-9358 84125-W-IV Cove Molding Int. Plastic Ivory 160 Feet

E 10-9357 84125-W-LW Cove Molding Int. Plastic Linen White 160 Feet


- 10-9364 84125-CRC-IV Cable Retention Clip for Cove Molding Ivory 10 Each

- 10-9363 84125-CRC-LW Cable Retention Clip for Cove Molding Linen White 10 Each

Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationItems B is on Page 106 & F is on Page 104

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


FIBER OPTIC RACEWAYSquare Latch Duct Molding

A

B

CD

E F

G

H


A 10-9398 MRF12-TRT-IV “T” Fitting & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack

A 10-9397 MRF12-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack


A 10-9402 MRF17-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack


A 10-9394 MRF75-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 PackNot Sold Separately

* Manufactured Out Of Special Heat Resistant Material

A 99615K MRF75-TRT-I .75” Tee Fitting for MRM75 and MRC75 Ivory 10 Pack

A 99616K MRF75-TRT-W .75” Tee Fitting for MRM75 and MRC75 White 10 Pack

A 99614K MRF75-TRT-OW .75” Tee Fitting for MRM75 and MRC75 Office White 10 Pack

A 99620K MRF12-TRT-I 1.25” Tee Fitting for MRM12 and MRC12 Ivory 10 Pack

A 99621K MRF12-TRT-W 1.25” Tee Fitting for MRM12 and MRC12 White 10 Pack

A 99623K MRF12-TRT-OW 1.25” Tee Fitting for MRM12 and MRC12 Office White 10 Pack

A 99625K MRF17-TRT-I 1.75” Tee Fitting for MRM17 and MRC17 Ivory 10 Pack

A 99626K MRF17-TRT-W 1.75” Tee Fitting for MRM17 and MRC17 White 10 Pack

A 99624K MRF17-TRT-OW 1.75” Tee Fitting for MRM17 and MRC17 Office White 10 Pack


E 10-9494 MRF12-ICR-IV IC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack

E 10-9493 MRF12-ICR-LW IC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack





Not Sold Separately

E 99459K MRF75-ICR-I .75” Inside Corner Fitting for MRM75 & MRC75 Ivory 10 Pack

E 99454K MRF75-ICR-W .75” Inside Corner Fitting for MRM75 & MRC75 White 10 Pack

E 99455K MRF75-ICR-OW .75” Inside Corner Fitting for MRM75 & MRC75 Office White 10 Pack

E 99463K MRF12-ICR-I 1.25” Inside Corner Fitting for MRM12 & MRC12 Ivory 10 Pack

E 99465K MRF12-ICR-W 1.25” Inside Corner Fitting for MRM12 & MRC12 White 10 Pack

E 99460K MRF12-ICR-OW 1.25” Inside Corner Fitting for MRM12 & MRC12 Office White 10 Pack

E 99469K MRF17-ICR-I 1.75” Inside Corner Fitting for MRM17 & MRC17 Ivory 10 Pack

E 99470K MRF17-ICR-W 1.75” Inside Corner Fitting for MRM17 & MRC17 White 10 Pack

E 99475K MRF17-ICR-OW 1.75” Inside Corner Fitting for MRM17 & MRC17 Office White 10 Pack

Item B is on Page 106, Items G & H are on Page 104

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


FIBER OPTIC RACEWAYSquare Latch Duct Molding


C 10-9461 MRM-12-IV Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Ivory* 160 Feet

C 10-9460 MRM-12-LW Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Linen White* 160 Feet






D 10-9496 MRF12-OCR-IV OC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack

D 10-9495 MRF12-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack






- 10-9455 MRC-12-IV Sq. Plastic Molding w/ Non-Adhesive Backing Ivory* 160 Feet

- 10-9454 MRC-12-LW Sq. Plastic Molding w/ Non-Adhesive Backing Linen White* 160 Feet

- 10-9457 MRC-17-IV Sq. Plastic Molding w/ Non-Adhesive Backing Ivory* 160 Feet

- 10-9456 MRC-17-LW Sq. Plastic Molding w/ Non-Adhesive Backing Linen White* 160 Feet

C 99828 MRM75-I-T .75” Pre-Adhesive Bk. Latch Duct .75” x .5” x 6’ Ivory 120 Feet

C 99825 MRM75-W-T .75” Pre-Adhesive Bk. Latch Duct .75” x .5” x 6’ White 120 Feet

C 99830 MRM75-OW-T .75” Pre-Adhesive Bk. Latch Duct .75” x .5” x 6’ Office White 120 Feet

C 99838 MRM12-I-T 1.25” Pre-Adhesive Bk. Latch Duct 1.25” x .75” x 6’ Ivory 120 Feet

C 99835 MRM12-W-T 1.25” Pre-Adhesive Bk. Latch Duct 1.25” x .75” x 6’ White 120 Feet

C 99831 MRM12-OW-T 1.25” Pre-Adhesive Bk. Latch 1.25” x .75” x 6’ Office White 120 Feet

C 99848 MRM17-I-T 1.75” Pre-Adhesive Bk. Latch Duct 1.75” x 1” x 6’ Ivory 120 Feet

C 99845 MRM17-W-T 1.75” Pre-Adhesive Bk. Latch Duct 1.75” x 1” x 6’ White 120 Feet

C 99832 MRM17-OW-T 1.75” Pre-Adhesive Bk. Latch 1.75” x 1” x 6’ Office White 120 Feet

D 99441K MRF75-OCR-I .75” OC Fitting for MRM75 & MRC75 Ivory 10 Pack

D 99442K MRF75-OCR-W .75” OC Fitting for MRM75 & MRC75 White 10 Pack

D 99443K MRF75-OCR-OW .75” OC Fitting for MRM75 & MRC75 Office White 10 Pack

D 99446K MRF12-OCR-I 1.25” OCr Fitting for MRM12 & MRC12 Ivory 10 Pack

D 99447K MRF12-OCR-W 1.25” OC Fitting for MRM12 & MRC12 White 10 Pack

D 99445K MRF12-OCR-OW 1.25” OCr Fitting for MRM12 & MRC12 Office White 10 Pack

D 99451K MRF17-OCR-I 1.75” OC Fitting for MRM17 & MRC17 Ivory 10 Pack

D 99452K MRF17-OCR-W 1.75” OC Fitting for MRM17 & MRC17 White 10 Pack

D 99450K MRF17-OCR-OW 1.75” OC Fitting for MRM17 and MRC17 Office White 10 Pack

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


FIBER OPTIC RACEWAY Square Latch Duct Molding - Continued


- 10-9490 MRF12-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack

- 10-9469 MRF12-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack





- 99645K MRF75-EC-I .75” End Cap Fitting for MRM75 & MRC75 Ivory 10 Pack

- 99646K MRF75-EC-W .75” End Cap Fitting for MRM75 & MRC75 White 10 Pack

- 99647K MRF75-EC-OW .75” End Cap Fitting for MRM75 & MRC75 Office White 10 Pack

- 99651K MRF12-EC-I 1.25” End Cap Fitting for MRM12 & MRC12 Ivory 10 Pack

- 99652K MRF12-EC-W 1.25” End Cap Fitting for MRM12 & MRC12 White 10 Pack

- 99653K MRF12-EC-OW 1.25” End Cap Fitting for MRM12 & MRC12 Office White 10 Pack

- 99656K MRF17-EC-I 1.75” End Cap Fitting for MRM17 & MRC17 Ivory 10 Pack

- 99657K MRF17-EC-W 1.75” End Cap Fitting for MRM17 & MRC17 White 10 Pack

- 99658K MRF17-EC-OW 1.75” End Cap Fitting for MRM17 & MRC17 Office White 10 Pack


- 10-9500 MRF12-JC-IV Join Cover for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack

- 10-9499 MRF12-JC-LW Join Cover for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack





- 99411K MRF75-JC-I .75” Joint Cover Fitting for MRM75 & MRC75 Ivory 10 Pack

- 99412K MRF75-JC-W .75” Joint Cover Fitting for MRM75 & MRC75 White 10 Pack

- 99413K MRF75-JC-OW .75” Joint Cover Fitting for MRM75 & MRC75 Office White 10 Pack

- 99416K MRF12-JC-I 1.25” Joint Cover Fitting for MRM12 & MRC12 Ivory 10 Pack

- 99417K MRF12-JC-W 1.25” Joint Cover Fitting for MRM12 & MRC12 White 10 Pack

- 99418K MRF12-JC-OW 1.25” Joint Cover Fitting for MRM12 & MRC12 Office White 10 Pack

- 99421K MRF17-JC-I 1.75” Joint Cover Fitting for MRM17 & MRC17 Ivory 10 Pack

- 99422K MRF17-JC-W 1.75” Joint Cover Fitting for MRM17 & MRC17 White 10 Pack

- 99423K MRF17-JC-OW 1.75” Joint Cover Fitting for MRM17 & MRC17 Office White 10 Pack

Not Sold Separately


F 10-9498 MRF12-FER-IV Flat Elbow & Radius for Sq. Plastic & Latch Duct Ivory 10 Pack

F 10-9497 MRF12-FER-LW Flat Elbow & Radius for Sq. Plastic & Latch Duct Linen White 10 Pack





F 99486K MRF75-FER-I .75” Flat Elbow Fitting for MRM75 & MRC75 Ivory 10 Pack

F 99487K MRF75-FER-W .75” Flat Elbow Fitting for MRM75 & MRC75 White 10 Pack

F 99485K MRF75-FER-OW .75” Flat Elbow Fitting for MRM75 & MRC75 Office White 10 Pack

F 99491K MRF12-FER-I 1.25” Flat Elbow Fitting for MRM12 & MRC12 Ivory 10 Pack

F 99492K MRF12-FER-W 1.25” Flat Elbow Fitting for MRM12 & MRC12 White 10 Pack

F 99490K MRF12-FER-OW 1.25” Flat Elbow Fitting for MRM12 & MRC12 Office White 10 Pack

F 99496K MRF17-FER-I 1.75” Flat Elbow Fitting for MRM17 & MRC17 Ivory 10 Pack

F 99497K MRF17-FER-W 1.75” Flat Elbow Fitting for MRM17 & MRC17 White 10 Pack

F 99495K MRF17-FER-OW 1.75” Flat Elbow Fitting for MRM17 & MRC17 Office White 10 Pack

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


FIBER OPTIC RACEWAYSquare Plastic Molding Exterior Grade

A

BC

D

E

F

Not Sold Separately

Not Sold Separately

Not Sold Separately

Not Sold Separately

Stock ID Part # Description Std. CRT Size UOM

A 10-9731 MRF12-TRT-E-IV T-Fitting & Radius for Sq. Plastic Exterior Grade 10 Pack

A 10-9734 MRF17-TRT-E-IV T-Fitting & Radius for Sq. Plastic Exterior Grade 10 Pack


B 10-9465 MRC12-E-IV Sq. Plastic Molding w/ Non-Adhesive Backing Exterior Grade 160 Feet

B 10-9423 MRC17-E-IV Sq. Plastic Molding w/ Non-Adhesive Backing Exterior Grade 160 Feet


C 10-9417 MRF12-OCR-E-IV Outside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack

C 10-9427 MRF17-OCR-E-IV Outside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack


D 10-9415 MRF12-ICR-E-IV Inside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack

D 10-9425 MRF17-ICR-E-IV Inside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack


E 10-9419 MRF12-FER-E-IV Flat Elbow and Radius for Sq. Plastic Exterior Grade 10 Pack

E 10-9429 MRF17-FER-E-IV Flat Elbow and Radius for Sq. Plastic Exterior Grade 10 Pack


F 10-9729 MRF12-EC-E-IV End Cap for Sq. Plastic Exterior Grade 10 Pack

F 10-9730 MRF17-EC-E-IV End Cap for Sq. Plastic Exterior Grade 10 Pack


- 10-9421 MRF12-JC-E-IV Seam Cover for Sq. Plastic Exterior 10 Pack

- 10-9431 MRF17-JC-E-IV Seam Cover for Sq. Plastic Exterior 10 Pack

Exterior Grade material is only available in Exterior Ivory

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


AB

CD

E

F

G

H

I

Not Sold Separately


A 10-9379 MRW15-EC-L-IV Left End Cap for Overlay Molding Ivory 10 Pack

A 10-9378 MRW15-EC-L-LW Left End Cap for Overlay Molding Linen White 10 Pack


B 10-9387 MRW-15-IV Overlay Molding/Open Crown 1.5” x .75” for MDU Ivory 10 Pack

B 10-9386 MRW-15-LW Overlay Molding/Open Crown 1.5” x .75” for MDU Linen White 10 Pack

Standard Colors are Linen White & IvoryItem E is on Page 106 & Item H is on Page 104


C 10-9376 MRW-DTRB-IV Seam Cover for Overlay Molding Ivory 10 Pack

C 10-9375 MRW-DTRB-LW Seam Cover for Overlay Molding Linen White 10 Pack


D 10-9383 MRW-SC-IV Cover Drop “T” and Radius for Overlay Molding Ivory 10 Pack

D 10-9382 MRW-SC-LW Cover Drop “T” and Radius for Overlay Molding Linen White 10 Pack

Patent In Process

FIBER OPTIC RACEWAYOverlay MoldingTM

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


FIBER OPTIC RACEWAYOverlay Molding - Continued

Overlay MoldingTM was designed to be installed over an existing provider’s molding system. It is a two piece design, which allows for access to the first molding system without disconnecting any cables. The cover of the overlay simply snaps onto the base which is mounted below the existing molding and “covers up” the existing molding and the new base. The base of the Overlay MoldingTM has a smooth co-extruded flexible cable keeper which won’t damage any cables during installation or removal. The corner pieces include bend radius protectors to maintain the minimum bend radius of 1”.

Not Sold Separately


F 10-9391 MRW-15-OWCR-IV Outside Corner & Radius for Overlay Molding Ivory 10 Pack

F 10-9390 MRW-15-OWCR-LW Outside Corner & Radius for Overlay Molding Linen White 10 Pack

Standard Colors are Linen White & Ivory

Not Sold Separately


G 10-9389 MRW-15-OWCR-IV Inside Corner & Radius for Overlay Molding Ivory 10 Pack

G 10-9388 MRW-15-OWCR-LW Inside Corner & Radius for Overlay Molding Linen White 10 Pack


I 10-9380 MRW15-EC-R-IV Right End Cap for Overlay Molding Ivory 10 Pack

I 10-9381 MRW15-EC-R-LW Right End Cap for Overlay Molding Linen White 10 Pack

TM

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


A

B

C

D

Not Sold Separately


A 10-9405 FDM3AB-IV Single Fiber Drop Molding Ivory 1200 Feet

A 10-9404 FDM3AB-LW Single Fiber Drop Molding Linen White 1200 Feet


B 10-9409 FDF3-OCR-IV OC & Radius for Single Fiber Drop Molding Ivory 10 Pack

B 10-9408 FDF3-OCR-LW OC & Radius for Single Fiber Drop Molding Linen White 10 Pack


C 10-9407 FDF3-ICR-IV IC & Molded Radius Single Fiber Drop Molding Ivory 10 Pack

C 10-9406 FDF3-ICR-LW IC & Molded Radius Single Fiber Drop Molding Linen White 10 Pack


D 10-9410 FDF3-FER-IV Flat Elbow w/ Molded RadiusSingle Fiber Drop Molding

Ivory 10 Pack

D 10-9411 FDF3-FER-LW Flat Elbow w/ Molded RadiusSingle Fiber Drop Molding

Linen White 10 Pack

FIBER OPTIC RACEWAYSingle Fiber Molding

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


Stock ID Part # Description Dimensions Color Weight Lbs. UOM

99737 MRFUV-WE-I Universal Wall Entry - Ivory 1.60 Each

99737K MRFUV-WE-I Universal Wall Entry Kit - Ivory 1.60 Each

99734 MRFUV-WE-W Universal Wall Entry - White 1.60 Each

99734K MRFUV-WE-W Universal Wall Entry Kit - White 1.60 Each

99735 MRFUV-WE-OW Universal Wall Entry - Off White 1.60 Each

99735K MRFUV-WE-OW Universal Wall Entry Kit - Off White 1.60 Each

Not Sold Separately


10-9432 WEBRP Wall Entry BRP - 10 Each


10-9436 MRM-75-DCW-LW Drop Cable Wall Entry Hoof - Cover/Base Linen White 10 Each

10-9437 MRM-75-DCW-OW Drop Cable Wall Entry Hoof - Cover/Base Off White 10 Each


10-9484 MRF12-R75-IV Reducer Fitting Reduces 1-1/4” to 3/4” Ivory 10 Each

10-9485 MRF12-R75-LW Reducer Fitting Reduces 1-1/4” to 3/4” Linen White 10 Each

10-9486 MRF17-R75-IV Reducer Fitting Reduces 1-1/4” to 3/4” Ivory 10 Each

10-9487 MRF17-R75-LW Reducer Fitting Reduces 1-1/4” to 3/4” Linen White 10 Each

Not Sold Separately

FIBER OPTIC RACEWAYAccessories For Plastic Moldings

FIBER OPTIC RACEWAYAccessories For MRM & MRC Series Molding


99580K MJB-1-I Single Gang Surface Mount Box 3.25” x 5” x 2” Ivory 0.20 Each

99581K MJB-1-WH Single Gang Surface Mount Box 3.25” x 5” x 2” White 0.20 Each

99584K MJB-1-OW Single Gang Surface Mount Box 3.25” x 5” x 2” Off White 0.20 Each


99582K MJB-2-I Double Gang Surface Mount Box 5” x 5.25” x 2” Ivory 0.25 Each

99583K MJB-1-WH Double Gang Surface Mount Box 5” x 5.25” x 2” White 0.25 Each

99585K MJB-1-OW Double Gang Surface Mount Box 5” x 5.25” x 2” Off White 0.25 Each


990000-MWP

MWP-13-I Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” Ivory 0.10 Each

990000M-PWHK

MWP-13-WH Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” White 0.10 Each

990000MW-POW

MWP-13-OW Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” Off White 0.10 Each


990000MW-P16IV

MWP-16-I Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” Ivory 0.10 Each

990000W-P16WH

MWP-16-WH Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” White 0.10 Each

990000MW-P16OW

MWP-16-OW Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” Off White 0.10 Each

Category 5, 5E & 6 1” Bend Radius Compliant

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


Applications & Features• Used to store up to 19 ft. of 3mm fiber optic cable• Used to store SC connectors• Interchangeable covers for different designs• MRM75 and Single Fiber sized easy to remove knockouts• Fiber Looms for easier cable management

FIBER OPTIC ACCESSORIESFiber Optic Interior Slack Storage Box


649-022-12 Flush Wall Entry Plug Bend Radius Protector Interior and Exterior Use Color: Ivory Only ( IV )

- - 100/Bag

Patent In Process

FIBER PLUG®

Multilink Plastic Flush Wall Entry PlugWith Built-In Bend Radius System

Multilink’s OSP slack storage box is 5” W x 5” L x 2” D. This OSP slack storage box is used for exterior slack storageapplications using 3mm single fiber cable. There are two stackable storage spools that allow storage of multiple singlefiber cable drops. Both of these spools are removable. In an instance where only one spool is sufficient, the spool caneither be secured at a lower level or can be mounted at an elevation onto the risers off the back of the inside of the boxas a spool on the upper level. This allows additional storage under the spool. There are three entry points sealed withremovable cap plugs, or it can be ordered without holes. The diameter of each entry hole is 1 inch. The box is equipped with a hex bolt (with a retainer) that can be secured using a standard 216C type wrench. In addition to the above, the box is also equipped with a provision for a hasp lock. A built-in hinge allows captive and non-captive flexibility.

Stock ID Description Dimensions Color Std. CRT Size UOM

020-004-23 Slack Box, Exterior with 3, 1” holes 4.8 L x 4.8 W x 2.2 D - 1 Each

020-004-24 Slack Box, Exterior without holes 4.8 L x 4.8 W x 2.2 D - 1 Each

FILL CHART

Bend Radius Cable Type EIA/TIA 40% Maximum Fill

1.263 Inches 3mm Fiber Optic Cable 5.2 1.58 M 13’ 3.9 MRT

1.211 Inches 3mm Fiber Optic Cable 4.4 1.34 M 11’ 3.52 MRT

FIBER OPTIC ACCESSORIESFiber Optic Exterior Slack Storage Box

Stock ID Description Color Std. CRT Size UOM

10-9434 Slack Storage Box Inside Living Unit Connector Ivory 1 Each

10-9433 Slack Storage Box Inside Living Unit Connector Linen White 1 Each

SECTIO

N 8

PLA

STIC &

STEEL INSTA

LLATIO

NP

RO

DU

CTS FO

R FIB

ER O

PTIC

CA

BLE


Downspout Exterior Raceway System

Item Part # Description UOM

A 039-138-10 Downspout Molding White Plastic Exterior 10’ (2 Piece System, Cover & Base) 120 FT / Ctn

A 039-138-11 Downspout Molding Brown Plastic Exterior 10’ (2 Piece System, Cover & Base) 120 FT / Ctn

A 039-138-12 Downspout Molding Beige Plastic Exterior 10’ (2 Piece System, Cover & Base) 120 FT / Ctn

C 039-143-10 Downspout Wall Strap White 10 / PK

C 039-143-11 Downspout Wall Strap Brown 10 / PK

C 039-143-12 Downspout Wall Strap Beige 10 / PK

D 039-141-10 Downspout Seam Cover White 10 / PK

D 039-141-11 Downspout Seam Cover Brown 10 / PK

D 039-141-12 Downspout Seam Cover Beige 10 / PK

E 039-147-10 Downspout 45 Degree Fitting White (2 Piece System) Each

E 039-147-11 Downspout 45 Degree Fitting Brown (2 Piece System) Each

E 039-147-12 Downspout 45 Degree Fitting Beige (2 Piece System) Each

F 039-146-10 Downspout 90 Degree Flat Fitting White (2 Piece System) Each

F 039-146-11 Downspout 90 Degree Flat Fitting Brown (2 Piece System) Each

F 039-146-12 Downspout 90 Degree Flat Fitting Beige (2 Piece System) Each

G 039-139-10 Downspout End Cap Fitting White (1 Piece) 10 / PK

G 039-139-11 Downspout End Cap Fitting Brown (1 Piece) 10 / PK

G 039-139-12 Downspout End Cap Fitting Beige (1 Piece) 10 / PK

H 039-163-10 Downspout to 4” Round Adapter White Each

H 039-163-11 Downspout to 4” Round Adapter Brown Each


H 039-164-10 Downspout to 3” Round Adapter White Each



D

C

A

H

G

F

E

SEC

TIO

N 8

PLA

STIC

& S

TEEL

IN

STA

LLA

TIO

NP

RO

DU

CTS

FO

R F

IBER

OP

TIC

CA

BLE


Terms And Conditions Of SalePrice and Payment: All prices, unless otherwise stated, are F.O.B. shipping point and are exclusive of any federal, state, local or other taxes. Any applicable taxes are

the responsibility of the Purchaser and shall be added to the invoice unless MULTILINK is provided the appropriate, valid exemption certificate by Purchaser. All prices are subject to change without notice. Shipments of ten percent (10%) more or less than the order quantity constitute completed orders, unless previously agreed to by both Purchaser and MULTILINK.

Invoices are payable in full within thirty (30) days following invoice date. A discount of one percent (1%) is allowable on invoices paid within (10) days following invoice date: this discount also applies to those orders shipped C.O.D. or cash in advance. Invoices outstanding past thirty (30) days following invoice date will be subject to a late payment charge of one and one half percent (1-1/2%) per month. Failure to pay any invoice by its due date makes subsequent invoices due immediately regardless of the terms herein. MULTILINK may option to withhold subsequent shipments until the account in question is settled to MULTILINK’S satisfaction.

Acceptance: All orders subject to acceptance by MULTILINK. Once placed and accepted, any order may be cancelled only upon terms exempting MULTILINK against all loss with the consent of MULTILINK.

Title and Risk of Loss: Title and risk of loss on all material sold by MULTILINK shall pass to Purchaser upon delivery of said materials to a common carrier regardless of freight terms stated or method of payment of transportation charges.

Transportation charges: Most shipments are via United Parcel Service and are prepaid and billed; however, MULTILINK reserves the right to specify routing of shipments. Truck shipments will be made prepaid.

Non-conformance return: All materials sold by MULTILINK are non-returnable except for manufacturing defects. Upon receipt of materials, the customer will have 30 days to make a viable claim for non-conformance. Any material shown to MULTILINK’S satisfaction to be non-conforming at time of shipment will be replaced. MULTILINK will then render credit for the returned goods, provided MULTILINK shall not be responsible for claims beyond replacement value of the defective material. Before returning any material, Purchaser must obtain written material return authorization from MULTILINK.

Express warranties: MULTILINK warrants that the goods are free from any material defect in workmanship and materials under normal and proper usage for a period of one year from the date of shipment by MULTILINK. Purchaser acknowledges that no sample or model of the goods, nor any sales literature, proposals, projections, or engineering data regarding the goods are any part of the basis of the bargain between the parties. Purchaser has made, and relies solely upon, its own determination of the suitability, compatibility, performance, and uses of the goods, and acknowledges to MULTILINK that the Purchaser does not rely upon any oral or written representations or statements by MULTILINK regarding the goods, other than as expressly set forth in this Contract.

Disclaimer of Implied Warranties: IN ALL EVENTS, WITH RESPECT TO ALL GOODS SOLD, MULTILINK DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Limitation of Damages: IF MULTILINK BREACHES OR REPUDIATES THIS CONTRACT BY REASON OF ANY DEFECT IN THE GOODS SOLD, THEN PURCHASER IS NOT ENTITLED TO, AND WAIVES ALL RIGHTS TO RECOVER, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS. Purchaser has carefully considered this limitation and is willing to bear the entire defective.

Purchaser’s Exclusive Remedy: IF MULTILINK BREACHES THE WARRANTY SET FORTH ABOVE, THEN PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS TO DEMAND THAT MULTILINK, AT MULTILINK’S COST, REPAIR THE GOODS, OR REPLACE THE GOODS IF, AFTER A REASONABLE NUMBER OF ATTEMPTS, THEY CANNOT BE REPAIRED. In lieu of making any repair or replacement of the Goods, Multilink may elect to refund the total purchase price, in full satisfaction of all obligations owed to Purchaser by reason of such breach, in which case Multilink’s duty to pay the refund will be conditioned upon Purchaser permitting Multilink to inspect and take possession of the Goods.

Statute of Limitations: The parties desire to reduce the period of limitations to one year. Accordingly, a party must commence a cause of action for a breach of this Contract, including a breach of warranty, within one year after the cause of action has accrued.

Entire Agreement: Any term or condition contained in Purchaser’s purchase order, acknowledgement form, confirmation or any other document issued by Purchaser that conflicts with any term of this Contract, or that adds to MULTILINK’S obligations under this Contract, is not part of this Contract and is not binding upon MULTILINK unless specifically identified and accepted in writing by an officer of MULTILINK. This document, including any attachments, embodies the entire agreement of the parties as to the subject matter contained in this document. There are no promises, terms, conditions, or obligations between the parties regarding the subject matter of this Contract other than those contained in this document, including any attachments. This Contract supersedes all previous communications, representations, or agreements, either verbal or written, between the parties, including any correspondence, proposals, quotes, brochures, samples, models, or specification sheets, or any other oral or written statements or representations made by any MULTILINK salesmen. Accordingly, the parties shall request that any court or tribunal called upon to consider and enforce this Contract strictly apply the “parol evidence” rule. No course of prior dealings between the parties and no usage of trade is relevant to supplement or explain any term of this Contract.

Modification of Contract: No amendment, modification, change or discharge of any term or provision of this Contract will be valid or binding on either party, and no waiver of any of the terms of this Contract will be valid or binding on either party, unless it is in writing and signed by all of the parties; and with respect to MULTILINK, signed by an officer of MULTILINK.

Non-Waiver: Failure of MULTILINK or any of its agents or representatives to comply with any of the terms or conditions herein or failure to properly notify Purchaser of any breach of these conditions shall not be deemed a waiver of any right MULTILINK has to insist upon strict compliance of these terms and conditions in subsequent agreements.

Force Majeur: MULTILINK shall not be liable for any loss, damage, delay, change in shipment schedule or failure to deliver caused by accident, fire, strike, riot, civil commotion, insurrection, war, the elements, embargo, failure of carrier, inability to obtain transportation facilities, government requirements, acts of God or public enemy, previous commitments to customers or limitations on MULTILINK’S or its suppliers’ products or marketing activities or any other cause or contingency beyond MULTILINK’S control.

Freight Policy: Orders are shipped via best method as determined by MULTILINK unless specified by the Customer. Freight bills will be prepaid if shipped via common carrier under the condition that freight bills will be paid in net 7 days per ICC regulations.

Returns must be in original cartons, in resell able condition, and sent prepaid. (If merchandise was shipped to customer via UPS, it must be returned via UPS). All returns must be made within a 60-day limit and are subject to a 25% restocking charge (Special order and custom orders are non-refundable).

Claims for Shortages or Damages: Claims must be made within seven days of invoice date. All freight damages and shortages should be filed with the carrier within seven days.

Back Orders: All back orders will be retained and shipped on arrival unless otherwise notified.

NO SALESMAN, DISTRIBUTOR, REPRESENTATIVE OR OTHER AGENT IS AUTHORIZED BY MULTILINK TO GIVE ANY WARRANTY OR GUARANTEE CONTRARY TO THE STATEMENTS MADE HEREIN.

109

multilink’s installation & construction catalog

Documents