multichoice universal pressure balance tub and shower … rev k.pdf · delta reserves the right (1)...
TRANSCRIPT
Delta reserves the right (1) to make changes in specifi cations and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for fi nish options and product availability.
MultiChoice® Universal Pressure Balance Tub and Shower with Diverter Valve for Dual Showers
See DSP-B-R10000-HDF for additional Rough-In options. Note: Use this page front and back as a product submittal sheet.1) Valve rated minimum 1.25 gpm @ 45 psi (4.7 L/min @ 310 kPa). Refer to www.specselect.com for individual models.
DSP–T13H3 Rev. K Page 2.C.7
0 0
PRODUCT VARIATION SHOWER HANDLE
22
11
33
55
77
99
44
66
88H2Okinetic Technology®
Showerhead, Arm & Set Screw Flange
Specify “0”When No ShowerOutlet Required(1)
3-Function Touch-Clean® Showerhead, Arm & Set Screw Flange
Showerhead, Arm & Set Screw Flange
30° Vandal ResistantCast WallmountShowerhead
Tub & Shower(Same as No. 3above) but withDiverter Spout
T13H923
Shower, Handshower with 2 Check Valves, Diverter Valve, 610 mm (24") S/S Bar with ADA Slide
Specification: (example)o R10700-UNWS ROUGH-IN only• Concealed in-wall MultiChoice® Universal valve• Back-to-back capability, Integral screwdriver stops• Heavy Duty forged brass valve body, • 1/2" Universal inlets to accept 1/2" copper,
1/2" iron pipe, PEX or CPVC adaptors• 1/2" Male thread inlets/outlets• In-wall diverter valve
o T13H _ _ _ - _ _ _ FINISH TRIM ONLY:• Pressure balancing cartridge with checks• Polished chrome plated finish • ADA compliant handle• Non-removeable red/blue temperature markingsand … with … (add product variation)
with … (add shower)with … (add valve handle)
TUB AND SHOWER DESCRIPTION PRODUCT NO. ROUGH-IN with Diverter Valve & Stops R10700-UNWS FINISH TRIM only T13H
FINISH TRIM ONLY:
Engineer/Architect Approval
Model Specifi ed:
Approval: Date:
4 4 4
®
Shower, Handshower with
0
1
2
3
4
5
6
7
8
9
57mm (2.24")Vandal Resistant Lever Blade Handle
85mm (3.33")Vandal Resistant Metal Lever Handle
DSP–T13H3 Rev. K
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
MultiChoice® Universal Pressure Balance Tub and Shower with Diverter Valve for Dual Showers
Page 2.C.8 DSP–T13H3 Rev. K
51mm(2.0")
OPTIONAL
910mm(36.0")
(7.0") Ø178mm
610mm(24.0")
(32.0")OPTIONAL
813mm
OPTIONAL
813mm(32.0")
(3.0")76mm 229mm
(9.0")
(3.213"- 3.613")82-92mm
(0.813")21mm
OUTLETLC
(3.0")76mm
508mm
OPTIONAL
152mm(6.0")
(2.75")70mm
910mm(36.0")
OPTIONAL
INLETCL
(3.0")
(20.0")
SECOND INLETPLUG FOR
1/2" F.I.P.
(4.75")121mm
(1.75"-2.50")44-66mm
(12.0")OPTIONAL
305mm
INLET
OPTIONAL
(3.0")76mm
OPTIONAL
76mm(3.0")
WALL SHOWEROUTLET 610mm
(24.0")HAND SHOWER
OUTLET2 OUTLETS
TO SHOWER
1/2" F.I.P.INLET/OUTLETINLET
FRO��AIN�A L� E
HOT � COLDINLETS
TO FLOOR
STOPS
�ET AL LE�ERHANDLE
R10700-UNWS
R10700-UNWS
LC �A L�E �OD �
(4.6")117mm
51mm(2.0")
OPTIONAL
910mm(36.0")
(7.0") Ø178mm
610mm(24.0")
(32.0")OPTIONAL
813mm
OPTIONAL
813mm(32.0")
(3.0")76mm 229mm
(9.0")
(3.213"- 3.613")82-92mm
(0.813")21mm
OUTLETLC
(3.0")76mm
508mm
OPTIONAL
152mm(6.0")
(2.75")70mm
910mm(36.0")
OPTIONAL
INLETCL
(3.0")
(20.0")
SECOND INLETPLUG FOR
1/2" F.I.P.
(4.75")121mm
(1.75"-2.50")44-66mm
(12.0")OPTIONAL
305mm
INLET
OPTIONAL
(3.0")76mm
OPTIONAL
76mm(3.0")
WALL SHOWEROUTLET 610mm
(24.0")HAND SHOWER
OUTLET2 OUTLETS
TO SHOWER
1/2" F.I.P.INLET/OUTLETINLET
FRO��AIN�A L� E
HOT � COLDINLETS
TO FLOOR
STOPS
�ET AL LE�ERHANDLE
R10700-UNWS
R10700-UNWS
LC �A L�E �OD �
(4.6")117mm
Approvals:• ASME A112.18.1/CSA B125.1• Indicates compliance to
ICC/ANSI A117.1• Pressure Balance Valve complies with
ASSE 1016 • Handshower back flow protection provided by
two integral certified check valves in series, which operate independently, ASME A112.18.3
( Contact Delta Representative for State and/or Local Approvals.)
Note: Measurements may vary ± 6mm (0.25")
P/B VALVE INLETS:1/2" Universal inlets accept 1/2" copper,1/2" Iron pipe, PEX or CPVC adaptors1/2" Male thread inlets/outlets
DIVERTER VALVE:1/2" FIP inlets/outlets
FLOW RATE vs PRESSURE
2.5
3
3.5
2
1.5
1
.5
000
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
10
11
12
13
Shower Outlets
Product Variations
No. 2
No. 3 & 9
Line Pressure (psig)
FLOW(L/min.)
FLOW(gpm)
No. 3 & 6 No. 8
FRONT VIEWSIDE VIEW
R10700-UNWS Rough-Inwith
T13H932 Trim
FLOW RATE vs PRESSURE
6.5
7
7.5
8
5.5
6
5
4
4.5
3.5
3 11.5
13
20 30 40 50 60 70 80 Line Pressure (psig)
FLOW(L/min.)
FLOW(gpm)
14.5
16
17.5
19
20.5
22
23.5
25
26.5
28
29.5
Shower Outlet Flow Rates
Tub Filler Flow Rates
®
NOTE FOR SHOWER #6: Not for use as an anti-ligtature device.
PAUSE WARNING – FOR SHOWER #5
Plumbing Codes require that showerheads and handshowers provide a small but continuous flow of water (trickle) when in “PAUSE” mode. Because of this continuous flow, in certain circumstances pressure variations in the water line and/or changes in the position of the shower temperature control handle while in “PAUSE” mode could result in dramatic changes to the temperature of the water when the shower head or hand shower is returned to the “ON” position.
ALWAYS point the shower head away from yourself when returning to the “ON” position and feel the water with your hand before resuming your shower to ensure the water flow is not too hot or too cold. DO NOT allow children or others who might not understand this warning to use the “PAUSE” function.
DSP–T13H3 Rev. K
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
DSP-T13H3 Rev. K Page 2.C.7
T13H Series Tub and Shower Add-On Options
0 0
HOSE SIDE BAR
22
11
33
4
5
4
DESCRIPTION ADD-ON NUMBER
Always use “0” if NO selection is required from this column
914mm (36") S/S Slide Bar (See Note 2)
Always use “0” if NO selection is required from this column
1753 mm (69")Long CP Stainless Steel Hose – Stretches to 92" (2337 mm) (See Note 1)
Note: (1) Base Product for the HOSE, ETC. option must be from PRODUCT VARIATION TRIM No.’s 3 or 9 (2) Base Product for S/S Slide Bar must be from PRODUCT VARIATION TRIM No.’s 3 or 9
4 4
–T13H Tub/Shower Add-On Options
A number from the Hose and Slide Bar columns must always be selected, even if it is “0”.
DSP–T13H3 Rev. K