multiboost brochure 01.03.16 - drilling and pumping ... › wp-content › uploads › 2016 › 11...
TRANSCRIPT
MULTIBOOSTPackaged Solution for Boosting Water
The
Range
› Need to boost your water pressure?
There are many reasons for experiencing low water pressure problems including high demand, location and shared supply. The Multiboost range is a self-contained cold water booster set speci� cally designed for use in domestic and light commercial properties where existing water pressure and � ow is insu� cient tomeet demand. The range caters for all space and storage capacity requirements.
› Why do I need a tank and a pump?
To increase water � ow there must � rst be more water. If your mains is not delivering, then you need a break tank to store your own water supply ready for when you need it. This can then be pumped to youroutlets on demand giving you su� cient water pressure and supply.
› Why can’t I just � t a pump onto the mains?
Water Authority by-laws prevent a pump being directly connected to the mains supply, so when your mains water pressure needs a boost, a break tank must be incorporated into the system. There is an exemption for pumps up to 12 ltr/min but this is not guaranteed and relies on your mains being capable of delivering this volume. To put this into context, asingle shower typically requires between 9-15 ltr/min.
› Will it be noisy?
All pumps create noise, but by incorporating an ultra-quiet running submersible pump within a tank unit, this means that the Multiboostrange is about as quiet as you can get in the market.
› Is it easy to install?
Our all-in-one tank and pump unit is designed to remove the headache for your installer. It is a packaged unit and therefore is fast and easy to install.
› Where am I going to put it?
The Multiboost range has been designed to provide the end user with avariety of options in terms of water storage and usage requirements as well as availability of space. Typical installation areas include garages, plant rooms, utility rooms and basements.
› What is the di� erence between the � xed speed and thevariable speed version?
The � xed speed version has an adjustable pump controller that ensures you always have a minimum set pressure to your outlets. As demand increases the pressure will reduce as this is a characteristic of a � xed speed unit.
The variable speed version has an intelligent pump controller that will supply a smooth � ow of water to every outlet by maintaining a constantpressure throughout your property, speeding up and slowing down the pump to suit demand. This ensures e� cient operation of the pump leading to reduced energy consumption.
› What size property will this supply?
The Multiboost range is scalable and additional capacity can be added for large properties or those with particularly poor incoming � ow rates. We have designed the range to � t in all domestic and commercial properties (incoming � ow rate and required usage must be taken into consideration). If you have a weak incoming water supply yet a high demand for water, you also have the option to link a slave tank to ensureyou have enough stored water to meet demand.
› What if my tank runs out of water?
The controller will turn o� the pump if there is no water in the tank. It will automatically reset after a short delay allowing the water volume in the tank to recover. This pump protection feature ensures a long andhappy life for the pump.
MULTIBOOST
Boost Water Pressure & Flow
Compact Design
Quiet & Reliable
Ease of Installation
Dry Run Protection
2
BOOST
Boost Water Pressure & Flow
Domestic Commercial Agricultural Industrial Municipal
Applications Include:
The
Range
Multiboost Compact: 125ltr
The Multiboost Compact has been speci� cally designed for smaller properties with low water pressure and � ow and where space is at a premium i.e. apartments/townhouses. Fitting into the space of a standard kitchen unit, the Powertank Compact is a similar size to a compact washing machine so can be hidden away behind a cupboard door. The electronic controller automatically starts and stops the pump when a drop in pressure is sensed i.e. a tap is opened and closed.
3
Key Features
1. Non-corrosive holding tank (WRAS approved material)2. Pre-� tted WRAS approved � ll valve3. Integral over� ow weir4. Over� ow connection 5. Optional tank drain-o� � tting 6. Adjustable LED digital display � ow controller 7. Dry run protection with auto restart (time delay)8. Minimum installation required
System Connections
125ltr Compact
Product Code Model
1019648 125ltr Compact Fixed Speed
1019649 125ltr Compact Variable Speed
1028178 125ltr Compact Fixed Speed Auto Tech
Range Options
Connection Size
Inlet* ¾” BSP
Outlet 1” BSP
Over� ow 1¼" BSP
Drain O� 1” BSP
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: [email protected]
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
1
43
560
767
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: [email protected]
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
1
43
560
767
490mm 560mm
763mm850mm
623mm
143mm
767mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Nkm 2/3 0.75 1 H Metres 60 58 55 51 47 42 36 30 23
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt) Pedrollo NKM 2/3 (240 volt)
Controller Pres� o1.5 supplied with 2ltr pressure vessel Steadypress M/M 8.5amp (D01141091)
Current Input 3.4 amp 6 amp
Mains Power Cable 2mtr x 1mm2 3 core 2mtr x 1mm2 3 core
Pump dB Rating (approx.) <65dB <65dB
Tank Weight Empty 30 kg 34 kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 190mm 168mm
MULTIBOOST Compact
Applications Include:
Application:Application:
1
5
2
4
3
Fill Valve Variable Speed Option
*Bypass unit recommended to be � tted on inlet supply
4
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1" BSP
Drain O� 1” BSP
Product Code Model
1012150 200ltr Slimline Fixed Speed
1001906 300ltr Slimline Fixed Speed
1001905 300ltr Slimline Variable Speed
Key Features
• Non-corrosive holding tank (WRAS approved material)• Protective lid enclosure as standard• Minimal installation requirement• Adjustable LED digital display � ow controller • Dry run protection with auto restart (time delay)• Start-up pressure 2.5 bar (adjustable)
Range Options
System Connections
Multiboost Slimline: 200ltr & 300ltr
The Multiboost Slimline range can � t through a standard doorway. This makes it very convenient for new or existing properties as it can be easily � tted under a stairs, or in a utility room. The slimline range is ideal for 3 - 5 bedroom houses, with poor water pressure and � ow and where � oor space is limited.
200ltr Slimline 300ltr Slimline
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00200V-300 -MULTIBOOST FINISHED
SW
25/08/2015 1 1
1190
870
584
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00300V-300 -MULTIBOOST FINISHED
Cal McCarthy
26/08/2015 1 1
1580
1260
584584mm
584mm
1190mm
1580mm
1260mm
870mm
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt) Pedrollo NKM 2/3 (240 volt)
Controller Pres� o Multi with integral 3 litre pressure vessel Steadypress M/M 8.5amp (D01141091)
Current Input 3.4 amp 6 amp
Mains Power Cable 5mtr x 1.5mm2 3 core 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB <65dB
Tank Weight Empty 200ltr = 26kg 300ltr = 29kg 200ltr = 33kg 300ltr = 36kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 285mm 285mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Nkm 2/3 0.75 1 H Metres 60 58 55 51 47 42 36 30 23
MULTIBOOST Slimline
Applications:
InletOverfl ow
Variable Speed Option
*Bypass unit recommended to be � tted on inlet supply
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00750V - PRODUCT -EPS
CARBERY PLASTICSLTD
SW
26/08/2015 1 1
2113
1753
760
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00250V - PRODUCT -EPS
CARBERY PLASTICSLTD
SW
26/08/2015 1 1
1033
673
760
250ltr Utility
5
Multiboost Utility: 250ltr, 500ltr, 750ltr
The Multiboost Utility range is designed for domestic and light commercial use where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where � oor space is not restricted. This range caters for a wider variation of tank options.
Key Features
• Non-corrosive holding tank (WRAS approved material)• Protective lid enclosure as standard• Minimal installation requirement• Adjustable LED digital display � ow controller • Dry run protection with auto restart (time delay)• Start-up pressure 2.5 bar (adjustable)
System Connections
500ltr Utility
Product Code Model
1001911 250ltr Utility Fixed Speed
1012151 250ltr Utility Variable Speed
1001911 500ltr Utility Fixed Speed
1001912 500ltr Utility Variable Speed
1001916 750ltr Utility Fixed Speed
1012152 750ltr Utility Variable Speed
Range Options
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1" BSP
Drain O� 1” BSP
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00450V - PRODUCTASSEMBLY
CARBERY PLASTICS
SW R2.1
26/08/2015 1 1
PT
1393
1033
760
750ltr Utility
760mm
1033mm
673mm
760mm760mm
1033mm
1393mm
1753mm
2113mm
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt) Pedrollo NKM 2/3 (240 volt)
Controller Pres� o Multi with integral 3 litre pressure vessel Steadypress M/M 8.5amp (D01141091)
Current Input 3.4 amp 6 amp
Mains Power Cable 5mtr x 1.5mm2 3 core 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB <65dB
Tank Weight Empty 250ltr = 28kg 500ltr = 35kg 750ltr = 46kg 250ltr = 35kg 500ltr = 42kg 750ltr = 53kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 285mm 285mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Nkm 2/3 0.75 1 H Metres 60 58 55 51 47 42 36 30 23
MULTIBOOST Utility
Applications:
InletOverfl ow
Variable Speed Option
*Bypass unit recommended to be � tted on inlet supply
MULTIBOOST Utility
Key Features
• Non-corrosive holding tank (WRAS approved material)• Minimal installation requirement• Adjustable LED digital display � ow controller • Dry run protection with auto restart (time delay)• Start-up pressure 2.5 bar (adjustable)
System Connections
1000ltr Utility
Product Code Model
1001925 1000ltr Utility Fixed Speed
1012153 1000ltr Utility Variable Speed
Range Options
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1" BSP
Drain O� 1” BSP
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX01000R-XXX - Product- 285mm Lid
Carbery Plastics
SW
26/08/2015 1 1
Tanks
1688
563
1444 1407
Multiboost Utility: 1000ltr
The Multiboost Utility range is designed for commercial use on a larger scale where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where the � oor space is not restricted. This range caters for a wider variation of tank options to suit various applications.
1 1
2 2
3 3
4 4
5 5
6 6
AA
BB
CC
DD
EE
FF
Desig
ner
Rev.
No
:
Date
Rev.
Date:
Sh
eet
/
Carbery
Plastic
sLtd
.C
lo
nakil
ty
En
terpris
eP
ark,
Clo
nakil
ty,
Co
.C
ork.
Tel:
00
35
3(0
)23
88
33
53
1
Tit
le
Pro
ject
co
mpan
y
Scale
From
Draw
ing
©C
arbery
Plastic
sLtd
.A
ll
Use,
Exh
ibit
ion
or
Co
pyin
go
fD
raw
ing
Expressly
Fo
rbid
den
unless
Auth
oris
ed
by
Carbery
Plastic
sLtd
.
STX
X0
10
00
R-X
XX
-P
ro
duct
-2
85
mm
Lid
Carbery
Plastic
s
SW
26
/08
/20
15
11
Tanks
1688
563
1444
1407
1444mm
569mm
1688mm
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt) Pedrollo NKM 2/3 (240 volt)
Controller Pres� o Multi with integral 3 litre pressure vessel Steadypress M/M 8.5amp (D01141091)
Current Input 3.4 amp 6 amp
Mains Power Cable 5mtr x 1.5mm2 3 core 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB <65dB
Tank Weight Empty 63kg 70kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 285mm 285mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Nkm 2/3 0.75 1 H Metres 60 58 55 51 47 42 36 30 23
6
Applications:
Multiboost Utility range is designed for commercial use on a larger scale where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where the � oor space is not restricted. This range caters for a wider variation of tank
InletOverfl ow
Variable Speed Option
*Bypass unit recommended to be � tted on inlet supply
Product Code Model*
1019276 250ltr Bunded Fixed Speed
1019650 250ltr Bunded Variable Speed
Range Options
Key Features
• Non-corrosive bunded tank (WRAS approved material)• Protective lid enclosure as standard• Minimal installation requirement• An internal electronic device starts or stops the pump
automatically when the tap is open or closed • After long periods of pump inactivity the electronic device
starts the pump every 48 hours for 10 seconds • Dry run protection with auto restart (time delay• Start-up pressure 1.5 bar
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1"BSP
Drain O� 1” BSP
System Connections
250ltr Bunded
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
BTBLXX00250VCARBERY PLASTICS
LTD
SW
31/08/2015 1 1
760
1478
1136
760mm
1136mm
1478mm
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt) Pedrollo NKM 2/3 (240 volt)
Controller Pres� o Multi with integral 2 litre pressure vessel Steadypress M/M 8.5amp (D01141091)
Current Input 3.4 amp 6 amp
Mains Power Cable 5mtr x 1.5mm2 3 core 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB <65dB
Tank Weight Empty 45kg 53kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø Internal 190mm, External 285mm Internal 190mm, External 285mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Nkm 2/3 0.75 1 H Metres 60 58 55 51 47 42 36 30 23
7
*Bypass unit recommended to be � tted on inlet supply
Multiboost Bunded: 250ltr
The Multiboost Bunded range is designed for commercial use where there is low mains water pressure and where pressure � uctuates. Every Multiboost Bunded tank bene� ts from a ‘tank within a tank’ bunded construction, with the outer tank able to maintain a minimum of 110% of the volume of the inner tank. The inner tank acts as the primary storage container, whilst the outer tank acts as a fail safe in the event of a spill. The Bunded range is designed for areas where the � oor space is not restricted.
The Top Multi 2 Auto is a submersible pump equipped with electronic features for starting and stopping the pump as the tap is turned on and o� . In the event of pump running dry it automatically tries to resume normal service at intervals of increasing time (15, 30, 60 minutes / max 24 hours).
MULTIBOOST Bunded
Applications:
The Multiboost Bunded range is designed for commercial use where there is low mains water pressure and where pressure � uctuates. Every Multiboost Bunded tank bene� ts from a ‘tank within a tank’ bunded construction, with the outer tank able to maintain a minimum of 110% of the volume of the inner tank. The inner tank acts as the primary storage container, whilst the outer tank acts as a fail safe in the event of a spill. The Bunded range is designed for
InletOverfl ow
Variable Speed Option
Product Code Model
1021452 270ltr Utility Fixed Speed Auto Tech
Range Options
Key Features
• Non-corrosive holding tank (WRAS approved material)• Protective lid enclosure as standard• Minimal installation requirement• An internal electronic device starts or stops the pump
automatically when the tap is open or closed • After long periods of pump inactivity the electronic device
starts the pump every 48 hours for 10 seconds • Dry run protection with auto restart (time delay• Start-up pressure 1.5 bar
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1" BSP
Drain O� 1” BSP
System Connections
Fixed Speed Option
Power supply 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt)
Controller Pres� o Multi with integral 3 litre pressure vessel
Current Input 3.4 amp
Mains Power Cable 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB
Tank Weight Empty 29kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 190mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
8
MULTIBOOST Rectangular
Applications:
270ltr Rectangular
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale
1 : 12
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
AT058E - EPS + 190 LIDEPS
SW R1.0
01-03-2016 1 1
Water
01-03-2016
432 456
1571
475
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale
1 : 12
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
AT058E - EPS + 190 LIDEPS
SW R1.0
01-03-2016 1 1
Water
01-03-2016
432 456
1571
475
432mm
475mm
1571mm
456mm
InletOverfl ow
Multiboost Rectangular: 270ltr
The Multiboost Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure � uctuates. The Multiboost Rectangular 270ltr tank is designed for areas where height restrictions and access are an issue.
The Top Multi 2 Auto is a submersible pump equipped with electronic features for starting and stopping the pump as the tap is turned on and o� . In the event of pump running dry it automatically tries to resume normal service at intervals of increasing time (15, 30, 60 minutes / max 24 hours). After approximately 30 minutes of repeated stopping and starting at intervals of less than 2 minutes from each other the device will stop the pump. After a rest period of 30 minutes the pump will automatically resume normal activity.
*Bypass unit recommended to be � tted on inlet supply
9
MULTIBOOST Rectangular
Product Code Model
1017488 300ltr Utility Fixed Speed
Range Options
Key Features
• Non-corrosive holding tank (WRAS approved material)• Minimal installation requirement• Adjustable LED digital display � ow controller • Dry run protection with auto restart (time delay)• Start-up pressure 2.5 bar (adjustable)
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1" BSP
Drain O� 1” BSP
System Connections
300ltr Utility
Multiboost Rectangular: 300ltr
The Multiboost Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when the tap is opened and closed. The Rectangular range is designed for areas where height restrictions are an issue.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00300V-002 -PRODUCT - EPS
Carbery Plastics
SW
26/08/2015 1 1
Tanks
287
710660
1045
665
375 375
287mm
1045mm
665mm
660mm710mm
375 375
Fixed Speed Option
Power supply 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt)
Controller Pres� o Multi with integral 3 litre pressure vessel
Current Input 3.4 amp
Mains Power Cable 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB
Tank Weight Empty 29kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 190mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
The Multiboost Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when the tap is opened
InletOverfl ow
Applications:
*Bypass unit recommended to be � tted on inlet supply
10
MULTIBOOST Rectangular
Key Features • Non-corrosive holding tank (WRAS approved material)• Minimal installation requirement• Adjustable LED digital display � ow controller • Dry run protection with auto restart (time delay)• Start-up pressure 2.5 bar (adjustable)
System Connections
500ltr Utility
Product Code Model
1017490 500ltr Utility Fixed Speed
Range Options
Connection Size
Inlet* ½” BSP
Outlet 1” BSP
Over� ow 1" BSP
Drain O� 1” BSP
Multiboost Rectangular: 500ltr
The Multiboost Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when the tap is opened and closed. The rectangular range is designed for areas where height restrictions are an issue.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
500L Rectangular TankCarbery Plastics
SW R4.0
26/08/2015 1 1
Tanks
650
7271190
1117
80
720
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
500L Rectangular TankCarbery Plastics
SW R4.0
26/08/2015 1 1
Tanks
650
7271190
1117
80
720
80mm
727mm
650mm1117mm
1190mm
720mm
Fixed Speed Option
Power supply 240 volt, 50Hz
Pump Pedrollo TOP Multi 2 (240 volt)
Controller Pres� o Multi with integral 3 litre pressure vessel
Current Input 3.4 amp
Mains Power Cable 5mtr x 1.5mm2 3 core
Pump dB Rating (approx.) <65dB
Tank Weight Empty 34kg
Tank Weight Full 1ltr of water = 1 kg plus weight of empty tank
Access Cover Ø 285mm
Pump TypePower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Top Multi 2 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Applications:
The Multiboost Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure � uctuates. It is electronically controlled through a � ow switch unit which starts and stops the pump automatically when the tap is opened
InletOverfl ow
*Bypass unit recommended to be � tted on inlet supply
Model Power m3/h 0 0.3 0.6 0.9 1.2 1.5 1.8 2.4 3.0 3.6 4.2 4.8
Product Code Single-phase kW HP AMP l/min 0 5 10 15 20 25 30 40 50 60 70 80
1000259* 3CRm 80 - N 0.45 0.60 3.3H
metres
40 38 37 36 34.5 33 31 27 22.5 17 11 5
1000272* 4CRm 80 - N 0.55 0.75 3.8 52 50 49 47 44.5 42 40 34 28.5 22.5 16 10
1019163* 5CRm80 - N 0.75 1 5.5 67 66 64 62 59 56 53 44.5 37.5 29.5 20.5 12
Technical Characteristics
• Recently updated range with new design• New improved hydraulic, even more reliable
and with higher performance • Reduced energy consumption• The most silent model in the centrifugal series
3/4/5CRm 80 Multi-Stage Centrifugal Pump
The CRm 80 Multi-Stage Centrifugal pump range is speci� cally designed for domestic water boosting applications. With its low power consumption motor, this pump is extremely quiet In operation. An additional � ow control unit (Pres� o Multi) allows the user the option to change and control the cut-in pressure required for each application. This unit also has a dry run feature in the event of the water supply system running dry with a time delay auto restart. The unit also includes a 3 litre surge tank on the control unit which prevents the pump from cutting on and o� if there is a minor leak/drip thus avoiding unnecessary starts and prolonging the life of the pump.
Connection Size
Inlet 1” BSP
Outlet 1” BSP
System Connections
*Pump & motor complete with Press Multi controller
Model dB(A) at 1m
3CRm 80 - N 53
4CRm 80 - N 54
5CRm80 - N 55
dB Rating*
MULTIBOOST Centrifugal Pump & Components
*The declared performances are valid for liquids with density 1,0 kg/dm3 and kinematic viscosity 1mm²/s
Pedrollo Top Multi 2• Flow rate up to 80ltr/min• Head pressure up to 4.2 bar• Float switch protection • Max liquid temperature 40oC• Power consumption 0.55kW• Product Code: 1001902
Pedrollo NKM 2/3 Pump• Flow rate up to 80ltr/min• Head pressure up to 6 bar• Float switch protection• Power consumption 0.75kW• Product Code: 1001539
Presfl o Multi • LCD display unit• Adjustable cut-in feature • 3ltr surge tank• Dry running protection with auto restart• Resin bonded electronics • Product Code: 1005165
Steady Pres• LCD display unit• Energy e� cient • Dry running protection • Excessively frequent starts• Overcurrent protection • Product Code: 1005156
Presfl o Surge Tank• 3ltr vessel • 1” connection• Lip seal included as standard• 10 bar working pressure• Product Code: 1016650
Pressure Wave• Stainless steel nipple 1”• 10 bar working pressure• Wras approved product• 2ltr Product Code: 1004917• 8ltr Product Code: 1004918
Pedrollo Top Multi-Tech (Auto)• Flow rate up to 80ltr/min• Head pressure up to 4.2 bar• Built-in electronic start/stop • Dry running protection• Power consumption 0.55kW• Product Code: 1019169
Wall Bracket Support• Adjustable arm length • 1” connection• Product Code: 1004953
Multi-Stage UV Filtration• Flow rate up to 23ltr/min at 30mJ/cm2• Flow rate up to 40ltr/min at 16mJ/cm2• Ultra violet disinfection • Odour removal• Enclosed cabinet plug and play• Product Code: 1019182
Slimline Drip Tray• Suitable for 200/300ltr Slimline range• 1" over� ow connection • Lift handles • Product Code: 1019180
11Disclaimer: We reserve the right to change speci� cations at any time without prior notice.
Slave Tanks
The Multiboost is a single pump booster set for cold water storage with capacity options ranging from 125ltr to 1000ltr. By simply adding an additional 'slave' tank, water storage capacity can be increased.
Product Code Model
1019647 125ltr tank only
Compact
Product Code Model
1012940 200ltr tank only
1005122 300ltr tank only
Slimline
Product Code Model
1005121 250ltr tank only
1005123 500ltr tank only
1005124 750ltr tank only
1005125 1000ltr tank only
Utility
Product Code Model
1021215 270ltr tank only
1016971 300ltr tank only
1016972 500ltr tank only
Rectangular
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
500L Rectangular TankCarbery Plastics
SW R4.0
26/08/2015 1 1
Tanks
650
7271190
1117
80
720
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00300V-300 -MULTIBOOST FINISHED
Cal McCarthy
26/08/2015 1 1
1580
1260
584
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd.All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00450V - PRODUCTASSEMBLY
CARBERY PLASTICS
SW R2.1
26/08/2015 1 1
PT
1393
1033
760
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: [email protected]
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
143
560
767
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: [email protected]
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
143
560
767
www.dps-ni .com sales@dps-ni .com