multi-angle irradiation line light · pdf file · 2017-11-27diagram illumination...
TRANSCRIPT
系列 型号 发光色 消费电力外形尺寸
外形图长mm 宽mm 高mm
LNMA-250W/B-GFN 48V/580W 266 360 93 1
LNMA-250R-GFN 48V/250W 266 360 93 1
LNMA-250W/B-GAC 48V/580W 266 375.9 93 2
LNMA-250W-GWC 48V/700W 266 320 93 3
LNMA
Multi-angle Irradiation Line Light
_ Lighting solution of mobile phone glass inspection
exceeding the traditional ones
Application:
1.AOI of mobile phone cover glasses
2.AOI of LCD baseplate glasses
3.AOI of PCB bare board
4.To be explored in many other industry.
Design Patented
Utility Model Patented
Model No. Demonstration
LNMA 250 R
ModelEmittingLength Color 1*
1* cooling method,.FN refers to fan cooling .ACrefers to air cooling. WC refers to water cooling.
Lineup
Color can be customized
Length can be customized
Air and water cooling method can be customized
Series Models LED Color PowerDimensions (mm)
Length Width HeightDiagram
Illumination Structure
SpecificationSeries
Input Voltage
LED Color
Color Temperature
Cooling Method Air / Water Cooling
Working Environment T : 0 to 40℃, H : 20% to 85% RH(with no condensation)
Controller Unit
LNMALNMA-250W-GFN Illuminance-Working Distance (Controller Intensity setting 45)
LNMA-250B-GFN Illuminance-Working Distance (Controller Intensity setting 255)
Working Distance (mm) Illuminance
Working Distance (mm) Illuminance Illuminance
LNMA-250W-GFN Lateral Illuminance Distribution
Lateral Length (mm)
Lighting Solution For Mobile Phone Cover Glass Inspection
Before Screen Printing
Multi-angle Irradiation line lights
Afer Screen Printing
Coaxial Line Light
LN1 Line Light
This solution can help finish the 5.5 inches phone glass inspection in 4~6s, enhancing the efficiency and detection rate.
Inspection Subjects of Phone Cover Glass before Screen Printing
Inspection Subjects of Phone Cover Glass after Screen Printing
DefectsPrecision
(mm)
Scratch
Defects Defects
Defects Defects Defects
Defects Defects
Defects Defects
Precision(mm)
Precision(mm)
Precision(mm) Precision
Precision(mm)
Precision(mm) Precision Precision
Precision
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Precision(mm)
Defects Defects
Defects Defects
Defects
Defects
Defects
Defects
BubbleForeignMatter
Water-mark Chip
RoughEdge Spilt White
SpotPits Cracks
ToothEdge
ExtraInk
ForeignMatter
Defects
Trans-lucent
LostInk
PoorIR
Trans-lucent
Defects
WhitePrintingScratch
BlackPrintingScratch
Pitsand
Points
Experiments Conditions1 Camera: P4-CM-08K070-00-R2 Lens : F90C-0.7 aperture 2.83 Light Model: LNMA-300W-FN + LN1-300W-FN-DF
4 Controller Model: PSC-60048-1-LS/PSC-30048-2-LS5 Exposure Time: 200µs6 Gain:47 Moving Speed: 50mm/s
Dimensions (mm)
The Imaging Contrast between LNMA series and TLN series
TLN Illumination LNMA Illumination
Water-cooling LNMA lights provide higher brightness illumination and help get better image than fan-cooling LNMA products.
Fan-cooling LNMA Illumination Water-cooling LNMA Illumination
Attention
1The area of the dashed box and fan should not be
blocked. A minimum 50mm gap should be guaranteed.
2 The weight of a single product is 6.6kg.
Attention
1 12 PC14-03 connector for 14mm air tube.
2 The weight of a single product is 7.8kg.
Attention
1 4 3/8 10mm connector for water tube of CW-3000 chiller.
2 The tube bending radius should not be above 30mm
3 The weight of a single product is 10kg.