muhammad shahid nazir cv 2015 _1_

2
MUHAMMAD SHAHID NAZIR CELL NO: +962796418742, Email: [email protected] , Skyp : shahidnazir91 Postal address Permanent:Village Mohanian wala chak No 14 RB Tehsil Safdar Abad District Sheikhupura(Punjab/Pak) EDUCATION B-TECH PASS ELCTRONICS Year 2012 PRESTON UNIVERSITY KOHAT, PAKISTAN DIPLOMA OF ASSOCIATE ENGINEERING Year 2009 From PANJAB BOARD OF TECHNICAL EDUCATION LAHORE, PAKISTAN MATRIC SCIENCE Year 2006 BOARD OF INTERMIDIATE & SECENDERY EDUCATION LAHORE, PAKISTAN OBJECTIVE I am seeking a challenging position with growing opportunities in a competitive environment where I can deploy my capabilities to enhance the organization’s value and hence my personal value. Self-starting, goal-oriented strategist whose confidence, perseverance and vision promote success. Fully computer literate, having good command on MP2, API Pro, CMMS, MS office & Windows. Fully aware about Quality standards like ISO 9001:2000, ISO 14000, OHSAS 18001, 5S and TPM. Looking for opportunities to get more skills, knowledge & exposure and developing an out standing carrier as a professional in the business sector. EXPERIENCE: Total 6 (Six) years in OIL&GAS,Petrochemical,Chemical industries as below details 1- INSTRUMENTATION TECHNICIAN AUG 2014 - CURRENT AL BAHA COMPANY FOR CAUSTIC CHALORINE AL ZARQA, JORDAN PRIVATE FREE ZONE RESPONCIBILITIESE: Troubleshooting & maintenance the all type of instrumentation of different companies.Fault finding and rectifying .Testing and calibration the instruments and maintain the record.Work on DCS DELTA V by Emerson (Hardware & Control penal).Work on Different units, Boiler, Chiller, Furnace, DEMI, Membrane plant, NAOH 50% concentration UNIT, Brine Purification, air compressor, air dryer unit & LCP. All type of instruments calibrates test and maintenance.Preventive & corrective maintenance. 2- INSTRUMENTATION TECHNICIAN APR 2014 - AUG 2014 ARAMCO PROJECT (WASIT GAS PLANT) AL JUBAIL, SAUDI ARABIA RESPONSIBILITIESE:Start working during the Erection of the plant and perform following duties.Testing and Calibration of different types of Instruments ,Termination of instruments from field to DCS 3- INSTRUMENTATION TECHNICIAN MAR 2010 – APR 2014 SITARA CHEMICAL INDUSTRY FAISALABAD, PAKISTAN RESPONSIBILITIESE: Troubleshooting & fault finding the whole plant instrumentation including DCS , PLC & local control panels Preventive & corrective maintenance Calibration and testing the whole plant instrumentations ,Work at Boiler & Burner control system . ERECTION & COMMISSIONING:During the maintenance job Erection & commissioning the following new plant.135 MTPD of DCS (By Supcon) controlled caustic soda plant with latest membrane technology .Commissioning the plant with UHDENORA ITALY.100 MTPD of DCS (By Supcon) controlled caustic soda flakes unit .Commissioning the plant with BERTREMS CHEMICALS SWITZELAND

Upload: muhammad-shahid-nazir

Post on 13-Apr-2017

276 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: MUHAMMAD SHAHID NAZIR CV 2015 _1_

MUHAMMAD SHAHID NAZIR CELL NO: +962796418742, Email: [email protected], Skyp : shahidnazir91

Postal address Permanent:Village Mohanian wala chak No 14 RB Tehsil Safdar Abad District Sheikhupura(Punjab/Pak)

EDUCATION

B-TECH PASS ELCTRONICS Year 2012 PRESTON UNIVERSITY KOHAT, PAKISTAN

DIPLOMA OF ASSOCIATE ENGINEERING Year 2009 From PANJAB BOARD OF TECHNICAL EDUCATION LAHORE, PAKISTAN

MATRIC SCIENCE Year 2006 BOARD OF INTERMIDIATE & SECENDERY EDUCATION LAHORE, PAKISTAN

OBJECTIVE

• I am seeking a challenging position with growing opportunities in a competitive environment where I can deploy my capabilities to enhance the organization’s value and hence my personal value. Self-starting, goal-oriented strategist whose confidence, perseverance and vision promote success.

• Fully computer literate, having good command on MP2, API Pro, CMMS, MS office & Windows. • Fully aware about Quality standards like ISO 9001:2000, ISO 14000, OHSAS 18001, 5S and TPM. • Looking for opportunities to get more skills, knowledge & exposure and developing an out standing carrier as a professional in

the business sector.

EXPERIENCE: Total 6 (Six) years in OIL&GAS,Petrochemical,Chemical industries as below details

1- INSTRUMENTATION TECHNICIAN AUG 2014 - CURRENT

AL BAHA COMPANY FOR CAUSTIC CHALORINE AL ZARQA, JORDAN PRIVATE FREE ZONE

RESPONCIBILITIESE: Troubleshooting & maintenance the all type of instrumentation of different companies.Fault finding and rectifying .Testing and calibration the instruments and maintain the record.Work on DCS DELTA V by Emerson (Hardware & Control penal).Work on Different units, Boiler, Chiller, Furnace, DEMI, Membrane plant, NAOH 50% concentration UNIT, Brine Purification, air compressor, air dryer unit & LCP. All type of instruments calibrates test and maintenance.Preventive & corrective maintenance.

2- INSTRUMENTATION TECHNICIAN APR 2014 - AUG 2014

ARAMCO PROJECT (WASIT GAS PLANT) AL JUBAIL, SAUDI ARABIA

RESPONSIBILITIESE:Start working during the Erection of the plant and perform following duties.Testing and Calibration of different types of Instruments ,Termination of instruments from field to DCS

3- INSTRUMENTATION TECHNICIAN MAR 2010 – APR 2014

SITARA CHEMICAL INDUSTRY FAISALABAD, PAKISTAN

RESPONSIBILITIESE: Troubleshooting & fault finding the whole plant instrumentation including DCS , PLC & local control panels Preventive & corrective maintenance Calibration and testing the whole plant instrumentations ,Work at Boiler & Burner control system .

ERECTION & COMMISSIONING:During the maintenance job Erection & commissioning the following new plant.135 MTPD of DCS (By Supcon) controlled caustic soda plant with latest membrane technology .Commissioning the plant with UHDENORA ITALY.100 MTPD of DCS (By Supcon) controlled caustic soda flakes unit .Commissioning the plant with BERTREMS CHEMICALS SWITZELAND

Page 2: MUHAMMAD SHAHID NAZIR CV 2015 _1_

4- INSTRUMENTATION TECHNICIAN APR 2013 – MAY 2013

DESCON ENGINEERING QATAR PETROLIUM DOHA, QATAR

RESPONSIBILITIESE: Maintenance ,calibration and testing the all plant instrumentations in oil & gas plant

5- INSTRUMENTATION TECHNICIAN SEP 2009 – MAR 2010

DESCON ENGINEERING PVT LTD (INSPECTEST) LAHORE, PAKISTAN

RESPONSIBILITIESE: TESTING AND CALIBRATION OF DIFFIRENT INSTRUMENT

KEY SKILLS & COMPETENCIES

TRANSMITTERS ,TRANSDUCERS &ANALYZERS: Maintenance, Installation & Calibrations of Pressure, Level, Flow and Temperature Transmitters of Foxboro, Yokogawa, Yamatake, ABB, Rosemount, Honeywell

CONTROL VAVLS & POSITIONERS: Maintenance, Installation & Calibrations of control valves and Positioners of Arca pro, Xomox, Fisher, Samson, Valtek,Dresser Masoneilan, Yamatake, Flowserve, PMV, Sounders,

COMMUNICATOR AND CALIBRATOR Hart Communicator of Yokogawa, ABB and 375, 475 by EMERRSON,Smart communicator of yamatake and yokogawa BT 200. Electronic Calibrator CA 100 by yokogawa and MC 1000 by Martel.Vacuum calibrator Temperature calibrator jofra CTC 65.ANALYZERS:PH and Conductivity (ABB, Emec, Yokogawa)

AREA OF EXPERTISE

Troubleshooting  ,Maintenance  (All types) Calibration, Erection & project Drawing Reading Commissioning , Termination & Loop testing ,PLC, DCS Relay Logic, Communication Skill.

PERSONAL PROFILE

M.Shahid Nazir S/O NAZIR AHMMED

DATE OF BIRTH 15-02-1991

N.I.C NO 35403-1319902-3

PASSPORT NO ER9829021

NATIONALITY PAKISTANI

MARITAL STATUS UNMARRIED

RELIGION ISLAM

GENDER MALE

LANGUAGE ENGLISH, URDU, PANJABI