mubassir
TRANSCRIPT
![Page 1: mubassir](https://reader036.vdocuments.mx/reader036/viewer/2022083102/588a28c91a28abb21f8b6a83/html5/thumbnails/1.jpg)
CURRICULUM VITAEMOHAMMED MUBASSIR SHAIKH
Mobile #: +918050222873 Email Id: [email protected].
QC/ QC ENGINEER
CAREER OBJECTIVES
Looking for an esteemed organization that would utilize and challenge my current skills, and improve knowledge to achieve goals through hard work and persistence and to be a part of a team that works dynamically towards the growth and development of the organization.
Looking for a position in Inspection & Installation of Piping and other mechanical equipments.
Bachelor of engineering (B.E) inMECHANICAL ENGINEERINGfrom Visveswaraiah Technological University BELGAUM
(KARNATAKA)INDIA.
Experience
Over 6.5 years of experience in core Mechanical Field.
PROFESSIONAL EXPERIENCE
Company : PUNJ LLOYD LIMITED
Client : RELIANCE INDUSTRIES LIMITED
Project : RIL J3
Position : QA/QC INSPECTOR (RIL approved)
Duration : Nov 2013 to July 2016.
![Page 2: mubassir](https://reader036.vdocuments.mx/reader036/viewer/2022083102/588a28c91a28abb21f8b6a83/html5/thumbnails/2.jpg)
Responsibilities:-.
Experience in inspection of Piping, Welding, Heat Treatment and NDT
To review the Isometric, Piping & Instrumentation Drawings
Good report writing skills and communication skills.
Conducting tool box meeting with regards to the various problems faced during the course of the
project.
Prepare and issue of Non-Conformance reports.
Involving in surveillance and preparing the surveillance reports.
Compilation of final documentation and hand-over.
As a team leader in Quality control department.
Day to Day planning and co-ordination of QA/QC activities.
Coordinate with site engineers for daily action plan and schedule plan of completion.
Maintain a close communication with inspectors so that problems, instructions and other
inspection matters are fully relayed to maintain inspection operation.
Discuss with inspectors the causes/reasons of occurrence of mistakes/omissions and necessary
corrective measures to prevent the error.
Familiar with the International standards like ASME B31.3, SECTION IX etc.
Review Inspection Test plan (ITP). Preparation of RFI. Inspect all finished jobs according to approved ITP.
Company : PUNJ LLOYD LTD
![Page 3: mubassir](https://reader036.vdocuments.mx/reader036/viewer/2022083102/588a28c91a28abb21f8b6a83/html5/thumbnails/3.jpg)
Client : GAIL INDIA
Project : DBPL (DHABOL BANGALORE PIPELINE PROJECT)
Position : QA QC ENGINEER
Duration : Dec 2009 to Oct 2013.
Responsibilities:-
Inspection of Incoming Materials Review of Standards and Procedures and Inspection test plan (ITP) Ensure all activities takes place according to check list Inspection of all internal and external coating at site and shop. Attend weekly meetings for progress and quality delivered. Monitoring contractor for progress. Preparetion of construction of welding procedure qualification Execute the weldigng qualification test Inspection of weld joints at site Ensure welding process,preheat temperatures and interpass temperature Verification of repair work,repair weld test and production test of weld joints Inspection of ultrasonic testing wherever required Inspection of liquid penetrant test and magnetic particle testing Radiography film interpretation of weld joints Familiar with the codes of Asme Section 9,Asme section 2,AsmeB 31.3 and API1104 Hydrotesting of various section of mainline pipeline and piping Carrying out the fabrication according to ismetric and GA drawing Check alignments of equipments and erection works Preparing final documentation and submission of radiography films Maintaining all the documents Co ordination with radiography team Review of valid Calibration certificate Received material as per project spec., Visual inspection for any . Check for Total dry film thickness with digital coating thickness guage. Repair on damaged area during paint coating or during handling Holiday Inspection.
TECHNICAL SKILLS:
![Page 4: mubassir](https://reader036.vdocuments.mx/reader036/viewer/2022083102/588a28c91a28abb21f8b6a83/html5/thumbnails/4.jpg)
Pipe support and Rack design, Expansion loop design. Knowledge of ASNT. Piping Material Selection/Specification/Valve selection. Pressure design of liquid Hydrocarbons and Gas Pipelines as per
ASME Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning
CERTIFICATIONS:
NDT Level –II CSWIP 3.1 (appeared)
Quality Control & Quality Assurance:
Inspection the incoming materials. Witnessing and monitoring the required NDE has been covered as per the project
specification. Carrying out regular QA/QC activities on painting and protective coating for pipes and
steel structures. Installations of under ground and above ground pipe lines for the gas and liquid pipe lines
of NDT testing and hydro testing. QA/QC activities of piping& structural works installations. Check & approve the technical specifications of the materials being procured/ received.
Prepare & submit work completion reports to the works Manager / Site Manage
PERSONAL PROFILE :
GENDER : MALE
MARITAL STATUS : UN-MARRIED
NATIONALITY : INDIAN
LANGUAGES KNOWN : ENGLISH, URDU, KANNADA & MARATHI
PASSPORT # : K1720690 VALID TILL 23/11/2021
MOHMMED MUBASSIR SHAIKH
![Page 5: mubassir](https://reader036.vdocuments.mx/reader036/viewer/2022083102/588a28c91a28abb21f8b6a83/html5/thumbnails/5.jpg)
Applicant.