mtntarp brochure.pdf
TRANSCRIPT
-
April 08. Copyright Wastequip Company 2008, all rights reserved. Specifications are subject to improvement without notice. CautionEquipment manufactured by Wastequip and/or its individual companies should be operated by properly trained personnel. Operators should be familiar with OSHA, ANSI and any other applicable standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. We assume no liability or responsibility for proper training/operation of equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. Information contained within this literature is intended to be the most accurate available at time of printing.
Mountain TarpHeadquarters1002 North 15th Street Middlesboro, KY 40965606-248-7717 phone800-248-7717 toll free606-248-2077 [email protected]
Mountain Tarp - Monroe, OH940 Holman Avenue Monroe, OH 45050(Exit 29, I-75)513-422-7737 phone877-725-7772 toll free513-422-7757 [email protected]
Mountain Tarp - Ravenna, OH4442 Street, Route 14 Ravenna, OH 44266(Exit 43, I-76)330-325-7722 phone866-344-7722 toll free330-325-7570 [email protected]
Mountain Tarp - Louisa, KY225 Fullers RoadLouisa, KY 41230606-686-2117 phone606-686-2118 [email protected]
-
www.mountaintarp.com
-
Company ProfileMountain Tarp began in September of 1987 as the brain child of President Jeff Bowling. He previously worked as a sales representative for a tarp company in Texas, but after five years Jeff returned home to Middlesboro, Kentucky to visit family and friends. There he noticed the great number of trucks and tractor trailers that were not being tarped or were tarped insufficiently. His decision was simple - to start his own tarping company that would provide the best quality product he could offer and at the most competitive price.
Mountain Tarp not only manufactures our own tarps in-house but also most of the hardware and parts that go with each system. State-of- the-art welding and machine capabilities allow us to fabricate and assemble all of our own systems, ensuring all Mountain Tarp products are the best quality we can offer.
In 2006 Mountain Tarp was acquired by Wastequip, a company nationally known for personal service, allowing us to now extend our products and services to customers around the world. As always, Mountain Tarp Has You Covered!
ECONOMY .......................... 3 Landscape Dump Shade Econo Flip Tarp
FLIP TARP ............................ 4 Dump Body Belly Dump Southern Spec (Small Trailers) Transfer Set Original Coal Bucket Frameless Demolition (Half Roun d) Transfer (Open Top) SIDE ROLL ...........................7 Ratchet Side Roll Lock-N-Roll Electric Lock-N-Roll Transfer Ratchet Side Roll Transfer Lock-N-Roll
TARP-N-GO CABLE SYSTEM ...............................10 Anti-Pollution Semi-Waterproof Side-Drop
SIDE FLIP ...........................12 Single Side Flip Double Side Flip
ROLL-OFF CONTAINERS ....14 Waterproof Side Roll Tarp-N-Go Cable System Hand Tarp
CRUSHED CAR HAULER ...15
FLAT BED SYSTEMS .........16 Side Kit Hand Tarps Rolling Tarp System
BEDLINERS ........................17
www.mountaintarp.com2
Tarp Materials
Hot top Gorilla mesh Mountain mesh Texnet
22 oz. vinyl 18 oz. vinyl 14 oz. vinyl Trash net
nothing wrong with map-this is bad trap issuefrom printer (note clean lines in some areas,chunky low res in others)
Weve got you covered with innovative tarping products
-
Economy SystemsLandscape, Dump Shade, Econo Flip Tarp
Mountain Tarp is pleased to announce our economy tarping systems created for economical pricing without losing the quality parts and workmanship that is standard with all our products. Currently we offer three different systems: the pull style Dump Shade, the Landscape, and the Econo Flip Tarp.
Landscape Our Landscape tarp is simple yet practical, mounting at the front of the trailer or body by two end plates with the roller bar attached between. The Landscape tarp comes with our exclusive locking handle. To roll the tarp up just unlock the handle and crank in to cover, then secure the rear with tarp straps, roll up the excess, and lock handle back into place. The Landscape is also our most economically priced tarping system designed for the landscape trailer.
Dump ShadeThe Dump Shade is shipped out fully assembled and operates similarly to a pull-down window shade. Constant spring tension is applied by our lifetime warranty heavy duty compression spring, while in the covered and uncovered positions. This system also comes with our smooth, aluminum housing and end plates mounted on the cab shield of the body. Made for virtually all small body needs, our Dump Shade can be fit to any size body.
Econo Flip TarpThe Econo Flip Tarp is a specially designed light duty version of the Flip Tarp for smaller dump bodies and low-impact usage. This system is available with side mount springs or extension springs, and direct drive or manual (ground level) operation.
Holds up to 32' of mesh tarp
Lifetime warranty on spring
Pre-assembled2-piece construction
Extruded aluminumhousing & end plates
Highlift gate dump body Mechanics body Transfer application Dump body top mount Simple pull operation
Extension spring Side mount spring
Optional wind shield& end plates
Pre-assembledgear box
Side orextension springsavailable
www.mountaintarp.com
MOUNTAIN TARP
3
3-Piece telescoping axle
-
Spring Options
4-Spring side mount up to 18
Through rail torsion spring up to 39
Under rail torsion spring up to 36
5-spring side mount up to 24
One Arm, Three UsesMountain Tarp's one-piece tarp arms are the strongest in the industry. You can order one of three standard tarp arm configurations or custom order arms to your specifications. The three standard options are shown here. Tarp arms bent up for raised cab shields
Tarp arm straightTarp arms bent forward-for extended cab shields
Drive Options
Roller Assembly OptionsYou have a choice of 2 options-an electric (left) or a manually powered roller system (right)
Black mesh tarp is fastened to a full length tarp axle
High polish anodized aluminum wind shield and end plates protect the tarp roller and are a classy look for your truck
In cab shield option
Flip Tarp Systems
For Dump Bodies Flip Tarp systems are available for applications from 10 up to 48 and come with the industrys first Guaranteed Unbreakable tarp arms. The Flip Tarp comes as either a manual, ground-operated system or as a fully automatic system, equipped with a motor backed by the manufacturers 3-year, non-prorated warranty. The Mountain Tarp Flip Tarp is the most overbuilt system on the market.
Roller assemblymounting options
available
3-year motorwarranty
Guaranteed Unbreakabletarp arms
3300 lb. flipping pressure
Tension hoop option locks tarp down on high cab shield mounts
www.mountaintarp.com
MOUNTAIN TARP
4
Tension hoop in untarped position.
Remote controlRocker switch with solenoid
Tarp Arm Guaranteed Unbreakable
you break it, well replace it!
Made of extruded aluminum, then polished and anodized for a lifetime shine.
Custom arm attachments available.
-
www.mountaintarp.com
MOUNTAIN TARP
Flip Tarp Systems
For Belly Dumps
The belly dump tarp roller assembly is available with a Diamond tread plate roller box for manual systems or a smooth roller box for electric systems
All tarp roller assemblies are custom built to fit your belly dump at no extra charge
Standard kit includes all necessary attachments (custom attachments available)
Available in electric or manual option
Custom-built roller assembly
Diamond tread plateroller box Guaranteed
Unbreakable arms
For Transfer Sets
Specially designed for Transfer sets, trucks, and pups
Uses 5-spring, side mount clock springs
Springs can be mounted up to 18" below the top rail for high mount applications
Outside-mounted arms on the front body, and inside-mounted arms on the rear trailer with spring covers to keep out debris
Total electric operation
For Southern Specs (up to 28 in length)
Custom designed to meet the specifications for small trailers in the southern U.S.
Standard with 3300 lb torsion springs and aluminum drop plates
Available in electric or manual option
Remote control option available
Top-mounted smooth, electric roller
assembly
Safety chain holds down tarp arms" either in the Belly Dump or Southern Spec section
Top mountingroller assembly
GuaranteedUnbreakable arms
High torquewarranted motor
Guaranteed Unbreakabletarp arm
Spring assembliesmounted inside for
transfer box
5
They are requesting better photobut we don't have one
-
www.mountaintarp.com
MOUNTAIN TARP
Flip Tarp Systems
The Original Coal Bucket (up to 36 in length)
Many of our Original Coal Bucket tarping systems manufactured in 1990 are still being used today
The roller box is mounted on two heavy duty braces, allowing the top of the box to be flush with the top of the bulkhead
3300 lb torsion spring assembly can be mounted in or under the bottom rail by use of spring drop plates
Available in electric or manual option
Frameless Trailers
Windshield and end plate roller assembly are mounted behind the raised bulkhead
Torsion spring assembly is mounted in the bottom rail
Torsion springs with 3300 lbs of flipping pressure are provided standard with 2 high-friction bearings
Custom designed kit for trailers with high rise bulkheadTop mount roller bar allows use of high rise bulkhead as a wind deflector
Top mount with wind shield, electric or manual
Ladder option available
Roller boxmounted on
bracesGuaranteedUnbreakable
arms
3300 lb flipping
pressure
Demolition Half Round (up to 34 in length)
Custom 7 bend in arms and special bracing to eliminate excess system width
Custom attachments for any trailer
Smooth, anodized and polished aluminum housing
Total electric operation
Guaranteed unbreakable custom bracing
Custom attachment for half round trailers with 3300 lb torsion springs
Custom bracingGuaranteedUnbreakable arm
3300 lb torsionsprings
Double arm for end dumps 37 - 48 long
thick tarp arms
Dual 3900 lbspring system
Transfer (Open Top) Trailers (up to 48 in length)
Covers chip and transfer trailers up to 48
Tarp is made 6 wider than the trailer to cover heaped loads
Roller box is mounted 3 below the top of the trailer so the tarp covers the front of the bulkhead
Dual 3900 lb springs used for covering end dumps over 36' and open top trailers up to 48' long
Pre-assembled front assembly for ease of installation
6
-
7Side Roll Tarp Systems for agricultural applications
Ratchet Side Roll Tarps
Waterproof and designed to accommodate heaped bulk loads above the bows
Designed so the entire tarp rolls out of the load area
Can be installed with a master bow and fabric cap to eliminate tarp strapping at the bulkhead
Tarp Stops keep rolled tarp away from the loading space
Side Roll Features
Optional fabricbonnet
Extruded tarpstops Heavy duty
rachets withbrackets
Removable handlewith universal joint
Custom tailstandard
6 EZ Tarp Stop 3 EZ Tarp Stop Flexible Belted Tarp Stop 3 or 6 Rubber Tarp Stop Elevated Tarp Stop Elevated Tarp Stop on Swing Gate
Ratchet and bracket
Removable Handle
Solid aluminum custom arch7/8 heavy duty aluminumcustom made arch and length
Standard adjustable steelStandard 8 rise bow with steelbow brackets
Flexible custom archAluminum or steel cast brackets mounted with a permanent arch (not recommended for hauling sand)
Heavy Duty BowConstructed from 1 1/2" round 14 gauge steel included with top rail mounting brackets
www.mountaintarp.com
MOUNTAIN TARP
Bow options for Ratchet Side Roll & Lock-N-Roll systems
Custom TarpsAt Mountain Tarp we custom make tarps from solid vinyl material to replace virtually any of your companys tarps, regardless of brand or style. Request our signature Stars and Stripes tarp design on your next tarp order.
-
Lock-N-Roll tarp systems for water tight agriculture applications
Lock-N-Roll Side Roll Tarps Manufactured out
of 22 ounce vinyl tarpaulin material (18 ounce option available)
All stress points are double reinforced for extra wear (optional bow reinforcements are also available)
Designed in a variety of sizes, from 10 grain boxes to 53 tipper trailers
Available in manual or electric (see Electric Lock-N-Roll)
Fabric BonnetA 10 aluminum master bow with 22 oz vinyl bonnet can be bolted in place as a permanent cap, or mounted with D-rings and tarp straps to be removable.
Custom Attached Tail FlapOur tail flap comes attached to the tarp, using bungees to secure coverage. This option is recommended for standard and swing gates.
Removable Tail BonnetThe tail bonnet is attached to the trailer separately fromthe tarp for easy removal. This option is recommendedfor standard tailgates and bottom-dump trailers.
Fabric bonneteliminates crackingaluminum or steel
Standardwith rollreturn
Double reinforcedstress points
Locking flexcrank handle
Lock-N-Roll Features (No Ratchet Straps Necessary)
Flex arm allows small bracket install
Rear roll return standard
Electric Lock-N-Roll Saves time and money!
Easy operationturn a switch and the system rolls across the trailer, secures under the latch plate, and seals the load
Constant and even tension is applied to the tarp at the front and rear, ensuring the trailer is sealed without straps or a crank handle
Remote control option available for even greater convenienceRemote control
Control unit
Reinforcedtarp Electric arm Motor
Rear rollreturn
www.mountaintarp.com
MOUNTAIN TARP
Bonnet & tail options
Strongest latch plate in the industry Flexible crank handle locks on side Straight crank handle locks at rear of trailer
8
-
9Heavy Duty Side Roll Tarp Systems for waste transfer
Side Roll Transfer Tarps Up to 53
Triple reinforced strap design
12,000 lb rated ratchet straps
Ratchet Side Roll Two straps are standard
for both the nose and tail
Top rails are all triple reinforced
Provided with ratchets, straps, and with either Gorilla mesh or vinyl material
Available with front crank operation
Custom designed for round or square nose trailers
Triple reinforcedtop rails
Exclusive EZ Off tarpstops
www.mountaintarp.com
MOUNTAIN TARP
Transfer trailer Side Roll systems are available in Ratchet and Lock-N-Roll styles with 22 oz vinyl or our exclusive heavy duty Gorilla mesh material designed for the trash industry. All sections of the tarp that receive wear are reinforced for extra durability, including: double reinforced pressure points with heavy duty webbing, triple
reinforced top rail and center beam with gorilla mesh and vinyl the entire length of the top rail, 18 oz vinyl reinforced nose and tail along the entire width, and custom sewn nose and tail ratchet straps to ensure even pull distribution.
2 tail strapsincluded
Flex or straight crank handles available
"Front aluminum cap option available
Lock-N-Roll Flex or straight mount rear
crank handle options
Front aluminum caps are used with Lock-N-Roll systems and are available with a 2" wind deflector
Available in either Gorilla mesh or 22 oz vinyl without ratchet and straps
Available in manual or electric operation
Standard withfront roll return
Double reinforcedpressure points Tarp stops
Crank handle
Gorilla MeshMade to the heavy duty standards required by the trash industry. This material is puncture rated at 385 lbs per square inch, without factoring in reinforcements. The nose and tail of the tarp are reinforced with 26 wide vinyl, increasing
puncture resistance to 785 lbs per square inch. All pressure points are reinforced with a 3 wide, heavy duty web rated at 15,000 lbs. Nose and tail ratchet straps are sewn in using 12,000 lb rated webbing.
Custom sewing on each tarp ensures an even pull distribution where all straps attach. Both the top rail and center beam are reinforced with a three-layer combination of Gorilla mesh and vinyl.
Vinyl Side Roll tarpsTested to meet the most strenuous industry requirements, our 18 and 22 ounce vinyl tarps are heavy duty at 1000 denier and come in a variety of colors to choose from.
Transfer Ratchet Side Roll & Lock-N-Roll tarpaulin material specifications
They are requesting better photobut we don't have one
Custom aluminum cap
-
Anti-Pollution, Semi-Waterproof, Side Drop
Tarp-N-Go Cable SystemsOur Tarp-N-Go cable style system is available in 3 different styles: Anti-Pollution for demolition, gravel, and rock; Semi-Waterproof for asphalt and sand; and Side-Drop system made to keep water out and heat in. All Tarp-N-Go systems are made with high quality aluminum components, stainless steel cables, and are available in manual or electric operation. The tarp bows store compactly out of the load area and are available in 6, 12, or 18 rises. The tarp bows also come standard with our exclusive EZ Bow ends, allowing bow and tarp replacement without removing the cable. The Power Bow option is standard for extra strength where needed. As many components as possible are pre-assembled at the factory, providing an easier installation.
Exclusive 4" and 6" standard anti-lifts prevent tarp from lifting Bent mount crank Straight mount crank
Standard full coverage wind deflector with easy motor access provided on all electric Tarp-N-Go systems
Manual crank with 9 locking positions
Anti-lifts
Bow options Bow end Self-cleaning pulley
Full windshieldManual operation
Bows are available in flat, 6", 12", and 18" rises. Our exclusive Power Bow (top) is standard for providing extra strength where it's needed.
Optional self-cleaning pulley eliminates ice and debris build-up
Extended wear, super tough nylon bow ends ensure smooth tracking operation
Standard rear idler with 4" pulley Extended idler allows tarp to extend past the tailgate
Quiet direct drive motor with sprocket
Direct drive motors are mounted centrally for even power distribution
Dual Tandem direct drive motors for up to 42' trailers
Idlers Electric options with 3-year non-prorated warranty
www.mountaintarp.com
MOUNTAIN TARP
Anti lift
Memory cable inside tarp
10
Extended wear bow ends with memory cable ensure pop-up between bows
-
11
Tarp-N-Go Cable SystemsAnti-Pollution Used for general containment
when weather conditions are not a concern
Recommended for demolition, gravel, rock, etc.
Standard features include EZ Off bow ends, tarp keepers, and power bow at the rear of the trailer
Tarp reaches inside to inside the top rail
Available with a mesh or vinyl tarp
Anti-lifts provided with vinyl tarp option
Heavyduty mesh
3-year warranty motor
Semi-Waterproof System offers semi-weatherproof
protection with a tarp that reaches outside to outside the edge of the top rail
Highly recommended for asphalt applications, with the tarp riding above the load, not on top of it
Tarps are provided with plastic memory cords on sides to help support the folds between the bows
Dual motor option provides enough power to tarp a 42 long trailer
Standard with 18 oz vinyl tarp available in a variety of colors
Tarp extends tooutside of top rail
Anti-liftsTarp reinforced at bows
MOUNTAIN TARP
www.mountaintarp.com
Tarp extendsover edge of
top rail
Side Drop Meets asphalt system requirements for states that
mandate a side drop
Keeps water out and heat in while in transit
Extended rear idlers are provided to extend the tarp to the end of the tailgate for additional coverage
Available with an 18 oz vinyl tarp
-
Electric-over-hydraulic for waste transfer trailers
Side Flip Tarp Systems
Tarp center is free of tubing so heaped loads can be totally covered
Self-contained electric-over-hydraulic power unit
Tarp hangs 6" below trailer top to seal load and supported with galvanized cable
Spherical frame bearings eliminate bearing failure due to misalignment
Rear latch secures load for greater containment
Mountain Tarp's Side Flip tarping kit fits both square and radius cornered trailers. This system offers bolt-on installation (no welding required), rapid opening/closing, and is ultra strong while remaining lightweight. Our Side Flip has been fully tested over 11,000 open/close cycles without failure, equating to a 10 year life of 4 cycles per day, 5 days a week. Special designing eliminates any tubing structure over the center of the trailer to allow full load capacity,
even when tarping heaped loads up to 3' tall. This system also has the added benefit of having the fewest parts of any side flipping style system on the market. The Side Flip kit includes: reinforced tarp, all mounting hardware, and a ground control unit to keep the operator safely on the ground. Should any of these parts become damaged, our modular design allows for quick and easy replacements without a welder.
Side Flip tarp kit will fit all square and radius trailers of any length
Self-contained electricover hydraulic power unit
www.mountaintarp.com
MOUNTAIN TARPCable attached to the tarp
for added support6" over hang ensures
total containment
No welding required
ONLY322 lbs
12
-
Electric-over-hydraulic operation for waste transfer trailers
Double Side Flip Systems
MOUNTAIN TARP
Simple, push button switch operation
14 gauge galvanized tubing
Durable and unique design allows for coverage of heaped loads
Tarp attached to cable to provide added support
Only tarp able to handle the scrap industry
Dual flipping arms
Only hard plastic mesh tarp with a warranty in the industry!
www.mountaintarp.com
Bolt-on assembly requires no welding
13
Perfect for any hauling needs: scrap metal, waste, wood chips, or we can even custom build a system to allow for any kind of load. The heavy duty mesh can accommodate a load up to 2' above the trailer. The Double Side Flip also covers in a matter of seconds, saving you time and money.
Steel components
Tarp attached to cable for added support
Overhang ensures total containment
Electric over hydraulic power unit
-
Roll-Off Container Tarp Systems
Extruded aluminum EZ Off tarp stop doesn't need to be unbolted when the tarp is changed
Bows can be temporarily removed for loading
Easy tension adjustable rear idler
Bearing-stabilized pulley shaft
Ratchets and straps
Heavy duty 2" ratchet
Waterproof Side Roll Water tight application Crank from either the front or the
rear Operates from ground Contains heaped loads Available in 18 oz or 22 oz vinyl
Black mesh with 2" seat belt webbing
Lightweight and durable trash net material
Hand Tarp Available in trash net, mesh and
vinyl Reinforcement webbing and
grommets every 24 on all edges Custom sizing per specs
Tarp-N-Go Locking crank operates from
the ground
Bows move with tarp and store compactly in front
Available in mesh or vinyl
Extruded aluminumEZ Off tarp stop
Protective full windshieldcomes pre-assembled
Stainlesssteel cables
9-position locking crank
Reinforcementwebbing
Bungeestraps
www.mountaintarp.com
MOUNTAIN TARP
Rearidler
14
-
15
Crushed Car Hauler SystemsThe Crushed Car Hauler system is designed to meet federal laws for containment of crushed cars. This system is both easy to install and operate with one person in as little as 5 minutes to save you time and money. It has no swinging gates, so it can be opened in even the most confined areas, with each side folding to store behind the trailer and out of the way. Our system is equipped with cables that lower out of the loading area, and greater convenience for two-sided trailers with the option of loading and unloading from either side. The Crushed Car Hauler system, like many of the systems Mountain Tarp manufactures, is also custom made for your trailer. At under 300 lbs per side, our system is ideal for flat bed, single drop or double drop trailers.
Trash net tarpaulin material is reinforced with vinyl and steel cables
Hoops lock the tarp compactly out of the way Manual winch option
Steel bearing rollers for smooth operation
Electric motor option raises and lowers the main cable
Steel bearingrollers
Steel cables in tarp keep itlocked against the trailer
Bearing pivots ONLY300 lbs
www.mountaintarp.com
MOUNTAIN TARP
Requesting new photowith hoops, preferably loaded
-
Flat Bed Systems
Hand TarpsLumber Tarps, Steel Tarps, Hay Tarps and Coil BagsWe offer a variety of cargo control for flat bed applications, all including:
Ratchets and ratchet straps
Winch and tarp straps
Winch and corner protectors
Chain and chain binders
Rolling Tarp System 5-year corner warranty
1-year total system warranty
Shock absorbent support wheels
Guiding bearings
Full length white roof panel standard
www.mountaintarp.com
MOUNTAIN TARP
Side Kit System Available up to 36 rise bows
Dove tail (shown) or wrap tail available
Lightweight removable panels
All hardware is interchangeable with any brand on the market
Custom fit nose and tail
Side panels available
16
-
17
Bedliners
Ultra High Molecular Weight (UHMW) Polyethylene LinersUHMW is our premier liner with the impact strength, slickness and abrasion resistance required for all aggregate loads. Available in a wide range of lengths and colors, with outstanding toughness and low friction, UHMW is ideal for nearly any load. Abrasion, corrosion and chemical resistance, along with sound dampening properties make this liner an unbeatable value.
www.mountaintarp.com
MOUNTAIN TARP
High Molecular Weight (HMW) Polyethylene LinersHMW bedliners offer an economically priced means of providing a protective liner for medium-duty hauling, from dirt and clay to farm commodities and light rock. These liners are available in a thickness of 1/4", 3/8", or 1/2", and in a wide range of custom widths and lengths.
Economy HMW
High impact UHMW
Premium warranted UHMW
Available in sheets only, complete kits, and up to 200 rolls of material