msds

Material Safety Data Sheet

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name Sodium sulfide hydrate

Cat No. S426-212

Synonyms No information available.

Recommended Use Laboratory chemicals

2. HAZARDS IDENTIFICATION

Target Organs No information available.

Potential Health Effects

Acute EffectsPrinciple Routes of Exposure

Eyes Severely irritating to eyes.Skin Irritating to skin.Inhalation May be harmful if inhaled.Ingestion Toxic if swallowed.

Chronic Effects None known

See Section 11 for additional Toxicological information.

Aggravated Medical Conditions No information available.

_____________________________________________________________________________________________

/ 8

Revision Number 1

Causes severe eye and skin irritation with possible burns. Toxic if swallowed. Contact with acids liberates toxic gas.Corrosive to metals. Very toxic to aquatic organisms.

Creation Date 03-May-2012 Revision Date 31-Jan-2013

CompanyFisher ScientificOne Reagent LaneFair Lawn, NJ 07410Tel: (201) 796-7100

DANGER!

Emergency Telephone NumberChemtrec US: (800) 424-9300Chemtrec EU: 001 (202) 483-7616

Emergency Overview

Odor odorlessAppearance Yellow Physical State Solid

_____________________________________________________________________________________________

3. COMPOSITION/INFORMATION ON INGREDIENTS

Haz/Non-hazComponent CAS-No Weight %

Sodium sulfide hydrate 27610-45-3 >95Sodium sulfide 1313-82-2 -

4. FIRST AID MEASURES

Eye Contact Immediate medical attention is required. Rinse immediately with plenty of water, also under theeyelids, for at least 15 minutes.

Skin Contact Wash off immediately with soap and plenty of water while removing all contaminated clothesand shoes. Immediate medical attention is required.

Inhalation Remove from exposure, lie down. Move to fresh air. If breathing is difficult, give oxygen. If notbreathing, give artificial respiration. Immediate medical attention is required.

Ingestion Do not induce vomiting. Call a physician immediately.

Notes to Physician Treat symptomatically.

5. FIRE-FIGHTING MEASURES

Flash Point No information available.Method - No information available.

Autoignition Temperature No information available.Explosion Limits

Upper No data availableLower No data available

Suitable Extinguishing Media Carbon dioxide (CO2). Dry chemical. chemical foam.

Unsuitable Extinguishing Media No information available.

Hazardous Combustion Products No information available.

Sensitivity to mechanical impact No information available.Sensitivity to static discharge No information available.

Specific Hazards Arising from the ChemicalDust can form an explosive mixture in air.

Protective Equipment and Precautions for FirefightersAs in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protectivegear.

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions Ensure adequate ventilation

_____________________________________________________________________________________________

/ 8

Flammability 0 Instability 0 Physical hazards N/A

Thermo Fisher Scientific - Sodium sulfide hydrate

NFPA

Revision Date 31-Jan-2013

Health 3

_____________________________________________________________________________________________

Environmental Precautions Should not be released into the environment

Methods for Containment and CleanUp

Avoid dust formation. Sweep up or vacuum up spillage and collect in suitable container fordisposal. Do not let this chemical enter the environment.

7. HANDLING AND STORAGE

Handling Do not breathe dust. Do not breathe vapors or spray mist. Do not get in eyes, on skin, or onclothing. Do not ingest. Use only in area provided with appropriate exhaust ventilation.

Storage Keep in a dry, cool and well-ventilated place. Keep container tightly closed. Keep away fromdirect sunlight. Corrosives area. Store under an inert atmosphere. Keep refrigerated.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Measures Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations andsafety showers are close to the workstation location.

Exposure Guidelines This product does not contain any hazardous materials with occupational exposure limitsestablished by the region specific regulatory bodies.

NIOSH IDLH: Immediately Dangerous to Life or Health

Personal Protective EquipmentEye/face Protection Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's

eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166Skin and body protection Wear appropriate protective gloves and clothing to prevent skin exposure.Respiratory Protection Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN

149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limitsare exceeded or if irritation or other symptoms are experienced.

9. PHYSICAL AND CHEMICAL PROPERTIES

Physical State SolidAppearance YellowOdor odorlessOdor Threshold No information available.pH No information available.Vapor Pressure No information available.Vapor Density No information available.Viscosity No information available.Boiling Point/Range No information available.Melting Point/Range No data availableDecomposition temperature No information available.Flash Point No information available.Evaporation Rate No information available.Specific Gravity No information available.Solubility No information available.log Pow No data availableMolecular Weight 78.04Molecular Formula Na2 S . x H2 O

_____________________________________________________________________________________________

/ 8

Thermo Fisher Scientific - Sodium sulfide hydrate Revision Date 31-Jan-2013

_____________________________________________________________________________________________

10. STABILITY AND REACTIVITY

Stability Stable under normal conditions. Moisture sensitive. Air sensitive.Light sensitive.

Conditions to Avoid Exposure to air. Exposure to light. Incompatible products. Exposureto moist air or water.

Incompatible Materials Strong oxidizing agents, Strong acids

Hazardous Decomposition Products Carbon monoxide (CO), Carbon dioxide (CO2), Sulfur oxides,Sulfides

Hazardous Polymerization Hazardous polymerization does not occur.

Hazardous Reactions . None under normal processing.

11. TOXICOLOGICAL INFORMATION

Acute Toxicity

Product Information No acute toxicity information is available for this product

Component InformationComponent LD50 Oral LD50 Dermal LC50 Inhalation

Sodium sulfide 208 mg/kg ( Rat ) Not listed Not listed

Irritation No information available.

Toxicologically SynergisticProducts

No information available.

Chronic Toxicity

Carcinogenicity There are no known carcinogenic chemicals in this product

Sensitization No information available.

Mutagenic Effects No information available.

Reproductive Effects No information available.

Developmental Effects No information available.

Teratogenicity No information available.

Other Adverse Effects See actual entry in RTECS for complete information.

Endocrine Disruptor Information No information available

_____________________________________________________________________________________________

/ 8


_____________________________________________________________________________________________

12. ECOLOGICAL INFORMATION

EcotoxicityDo not empty into drains.

Component Freshwater Algae Freshwater Fish Microtox Water FleaSodium sulfide hydrate Not listed Not listed EC50 = 4.29 mg/L 15 min Not listed

Sodium sulfide Not listed 7.7-29.1 mg/L LC50 96 h EC50 = 4.29 mg/L 15 min EC50 = 2.1 mg/L 48h

Persistence and Degradability Expected to be biodegradable.

Bioaccumulation/ Accumulation No information available

Mobility No information available

Component log PowSodium sulfide 3.5

13. DISPOSAL CONSIDERATIONS

Waste Disposal Methods Chemical waste generators must determine whether a discarded chemical is classified as ahazardous waste. Chemical waste generators must also consult local, regional, and nationalhazardous waste regulations to ensure complete and accurate classification

14. TRANSPORT INFORMATION

DOTUN-No UN1849Proper Shipping Name SODIUM SULFIDE, HYDRATEDHazard Class 8Packing Group II

TDGUN-No UN1849Proper Shipping Name SODIUM SULFIDE, HYDRATEDHazard Class 8Packing Group II

IATAUN-No 1849Proper Shipping Name SODIUM SULPHIDE, HYDRATEDHazard Class 8Packing Group II

IMDG/IMOUN-No 1849

_____________________________________________________________________________________________

/ 8


_____________________________________________________________________________________________

14. TRANSPORT INFORMATIONProper Shipping Name SODIUM SULPHIDE, HYDRATEDHazard Class 8Packing Group II

15. REGULATORY INFORMATION

International InventoriesComponent TSCA DSL NDSL EINECS ELINCS NLP PICCS ENCS AICS CHINA KECL

Sodium sulfide hydrate - - - - - X - - X -Sodium sulfide X X - 215-211-

5- X X X X X

Legend:X - ListedE - Indicates a substance that is the subject of a Section 5(e) Consent order under TSCA.F - Indicates a substance that is the subject of a Section 5(f) Rule under TSCA.N - Indicates a polymeric substance containing no free-radical initiator in its inventory name but is considered to cover the designatedpolymer made with any free-radical initiator regardless of the amount used.P - Indicates a commenced PMN substanceR - Indicates a substance that is the subject of a Section 6 risk management rule under TSCA.S - Indicates a substance that is identified in a proposed or final Significant New Use RuleT - Indicates a substance that is the subject of a Section 4 test rule under TSCA.XU - Indicates a substance exempt from reporting under the Inventory Update Rule, i.e. Partial Updating of the TSCA Inventory Data BaseProduction and Site Reports (40 CFR 710(B).Y1 - Indicates an exempt polymer that has a number-average molecular weight of 1,000 or greater.Y2 - Indicates an exempt polymer that is a polyester and is made only from reactants included in a specified list of low concern reactants thatcomprises one of the eligibility criteria for the exemption rule.

U.S. Federal Regulations

TSCA 12(b) Not applicable

SARA 313Not applicable

SARA 311/312 Hazardous CategorizationAcute Health Hazard YesChronic Health Hazard NoFire Hazard NoSudden Release of Pressure Hazard NoReactive Hazard Yes

Clean Water ActNot applicable

Clean Air ActNot applicable

OSHANot applicable

_____________________________________________________________________________________________

/ 8


_____________________________________________________________________________________________

CERCLANot Applicable

California Proposition 65This product does not contain any Proposition 65 chemicals.

State Right-to-KnowNot applicable

Component Massachusetts New Jersey Pennsylvania Illinois Rhode IslandSodium sulfide X X - - -

U.S. Department of TransportationReportable Quantity (RQ): NDOT Marine Pollutant NDOT Severe Marine Pollutant N

U.S. Department of Homeland SecurityThis product does not contain any DHS chemicals.

Other International Regulations

Mexico - Grade No information available

Canada

This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and theMSDS contains all the information required by the CPR.

WHMIS Hazard ClassD1B Toxic materialsD2B Toxic materialsE Corrosive material

_____________________________________________________________________________________________

/ 8


_____________________________________________________________________________________________

16. OTHER INFORMATION

Prepared By Regulatory AffairsThermo Fisher ScientificEmail: [email protected]

Creation Date 03-May-2012

Print Date 31-Jan-2013

Revision Summary (M)SDS sections updated 2 3

DisclaimerThe information provided on this Safety Data Sheet is correct to the best of our knowledge, information and belief at the dateof its publication. The information given is designed only as a guide for safe handling, use, processing, storage,transportation, disposal and release and is not to be considered as a warranty or quality specification. The informationrelates only to the specific material designated and may not be valid for such material used in combination with any othermaterial or in any process, unless specified in the text.

End of MSDS

_____________________________________________________________________________________________

/ 8


msds

Documents