msds for airfreight ink[1]

4
MATERIAL SAFETY DATA SHEET Product Name : Printing Ink Code : Chemical Name : Paste Manufacturer : GraphicArt Corp. Telephone : 84-650- Fax : 84-650- Emergency Telephone: 84-650- Fax : 84-650- 1. PRODUCT IDENTIFICATION PHYSICAL DESCRIPTION/PROPERTIES Physical Form : Paste Acrylate Modified Appearance : Paste Odor : Characteristic Solubility in water : Miscible Boiling Point : 220 0 F pH : 7.0-7.5 Melting Point : 32 0 F Flash Point : 220 0 F Vapor Pressure : Not Determined INGREDIENTS Chemical Entity CAS. No. By Weight Organic Pigments Proprietary <30% Polyester Acrilate Proprietary <50% Acrylate Monomer 28961-43-5 >20% 2. HAZARDS IDENTIFICATION Health Effects : Acute Inhalation : May cause respiratory irritation Chronic Inhalation : Not Determined 1

Upload: graphicart-corp

Post on 27-Jun-2015

534 views

Category:

Technology


3 download

DESCRIPTION

MSDS Airfright

TRANSCRIPT

Page 1: Msds for airfreight ink[1]

MATERIAL SAFETY DATA SHEET

Product Name : Printing InkCode : Chemical Name : Paste

Manufacturer : GraphicArt Corp.

Telephone : 84-650- Fax : 84-650-Emergency Telephone: 84-650- Fax : 84-650-

1. PRODUCT IDENTIFICATION

PHYSICAL DESCRIPTION/PROPERTIES

Physical Form : Paste Acrylate ModifiedAppearance : Paste Odor : CharacteristicSolubility in water : Miscible Boiling Point : 2200 FpH : 7.0-7.5 Melting Point : 320 FFlash Point : 2200 F Vapor Pressure : Not Determined

INGREDIENTS

Chemical Entity CAS. No. By Weight Organic Pigments Proprietary <30%Polyester Acrilate Proprietary <50%Acrylate Monomer 28961-43-5 >20%

2. HAZARDS IDENTIFICATION

Health Effects :Acute Inhalation : May cause respiratory irritationChronic Inhalation : Not Determined

Acute Skin Contact : May cause slight skin irritationChronic Skin Contact : Not Determined

Acute Eye Contact : May cause slight irritationChronic Eye Contact : Not Determined

Acute Ingestion : Irritating to mouth, throat and stomachChronic Ingestion : Not Determined

MEDICAL CONDITION AGGRAVATED BY EXPOSURE: None Known1

Page 2: Msds for airfreight ink[1]

3. FIRST AID MEASURES

First Aid for SkinRemove contaminated clothing and shoes. Wash affected area thoroughly with soap and water.

First Aid for EyesFlush at once with large amount of water at least 15 minutes holding lids apart. Get medical attention.

First Aid for InhalationRemove to fresh air.

First Aid for IngestionIf swallowed do not induce vomiting. Give victim one glass of water. Call doctor immediately.

Note to the DoctorEyes : NoneSkin : NoneIngestion : NoneInhalation : None

4. FIRE FIGHTING MEASURES

Flash Point : 2200F

Flammable Limits : Upper Explosive Limit (UEL) (%): Not Established

Lower Explosive Limit (UEL) (%): Not Established

Auto Ignition Temperature : Not Determined – DIN 51794

Extinguishing Media : Dry Chemical; Carbon Dioxide; Foam; Water

Special Fire Fighting Procedure : None

5. ACCIDENTAL RELEASE MEASURES

Spill or Leak Procedure : Absorb spill with inert materials (e.g. dry sand or earth) then place in a chemical waste container.

6. HANDLING AND STORAGE

Storage Temperature (Min/Max): 400F / 1200F

Shelf Life : 6 months

Special Sensitivity : Not Determined

Handling/ Storage Precautions : None

2

Page 3: Msds for airfreight ink[1]

7. PERSONAL PROTECTION

Required Work/Hygiene Procedure : None Established

Eye Protection Requirement : None Established

Skin Protection Requirement : Latex Gloves

Ventilation Requirement : Allow for adequate natural ventilation when applying

Additional Protective Measures : None

8. TRANSPORTATION AND REGULATORY INFORMATION

Hazard Class Division Number: Non Regulated (IMO/IMDG; Ocean)Non Regulated (ICAO/IATA; Air)

9. OTHER INFORMATION

This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of EDSON INTERNATIONAL. The data on this sheet relates only to the specific material designated herein. EDSON INTERNATIONAL assumes no legal responsibility for use or reliance upon this data.

3