Mounting Accessories

Angled mounting plattformsAttach with adhesive tape onto a flat,horizontal surface. Perfect e.g. for the boat.213077 angled 30° 213078 angled 45° 213079 angled 60°

213053 Tilt swivel plate, doubleAMPS-standardUsed to mount two separate units, like holderfor PDA and HF-equipment.

213005 MoveClip, smallAllows you to move your device betweenvehicles e.g. holder, HF-kit etc, or to easilyswitch between two units. Comes withadhesive tape on the back, consists of twoback pieces and one front piece.

213018 Tilt swivel plate, centered, AMPS-standardWith predrilled holes for Nokia and SonyEricsson Original HF-kits, Brodit holders andTHB HF-kits. Can be angled 15° in everydirection.

213020 Dual tilt swivel plate, AMPS-standardThe choice when you want to install two unitse.g. a holder for a PDA and a HF-kit. Withpredrilled holes for Nokia and Sony EricssonOriginal HF-kits, brodit holders and THB HF-kits. Can be angled 15° in every direction.

Device mounting adaptersAllows you to move your equipment betweenvehicles e.g. holder, HF-kit etc, or to easilyswitch between two devices. With predrilledholes for Nokia and Sony Ericsson OriginalHF-kits, Brodit holders and THB HF-kits.Item no 215053 CenteredItem no 215054 Center point to the leftItem no 215055 Center point to the right

215122 Tilt swivel plate, smallWith predrilled holes for Nokia and SonyEricsson Original HF-kits, Brodit holders andTHB HF-kits. Can be angled 15° in everydirection.

213008 Extention plateThe choice when you want to install two unitse.g. a holder for a PDA and a HF-kit. (3 pcs)

215200 Mounting equipmentBig tilt swivel plate.

213007 Angled extention plateThe choice e.g. when you want to install twodevices in different heights. (3 pcs/pack)

213023 Turn around plateAllows you to switch your device between anupright/horizontal position. Perfect for a HF-kitfor Ericsson 380 etc. With predrilled holes forNokia/Sony Ericsson original HF-kits.

215056 Distance plateThe choice e.g. when you want to install adevice a bit further out from the dashboard.7x42x50mm

Distance plate, angledThe choice e.g. when you want to install adevice in an angled position a bit further outfrom the dashboard. With 6 predrilled holes.50x50 mm.215162 angled 10° , thickness 5-14 mm.215163 angled 15°, thickness 5-18 mm.

2350

62 9

42

Tel +46 (0)505 109 00Fax +46 (0)505 445 72

Gesällvägen 8546 34 Karlsborg, Sweden

info@brodit.sewww.brodit.se

215058 Tilt swivel adapter plateMounting plate with Richter adapter, with tiltswivel.

ABS-plastic, blackAllows you to make your own special solutions.3 mm ore 5 mm. Consists of 4 pcs of 5x80x420mm, 4 pcs of 5x120x420 mm, 2 pcs of5x160x420 mm, 1 pcs of 5x200x420 mm.Item no. 215424 3 mm.Item no. 213017 5 mm.

215052 Mount with V-groove.For mobilephone, pager and orther deviceswith a button or a clip in back. Predrilledholes for easy installation on a ProClipmounting platform.

High strength adhesive tape, 15 mItem no 861636 width 6 mm Item no 861637 width 12 mm Item no 861638 width 25 mm

215145 FuseFuse 2 A, with holder.

215181 Flexible armFlexible arm, 15 cm. With predrilled AMPS-standard holes.

240411 Gap OpenerGap opener, big.

Mounting adapter Arkon, uprightA mounting adapter for use with devices andholders equipped with an Arkon mount.Choose between a mount with or without tiltswivel. Upright face plate.Item no. 215205 Mounting adapterItem no. 215204 Mounting adapter,

with tilt swivel

Mounting adapter Arkon, horizontalA mounting adapter for use with devices andholders equipped with an Arkon mount.Choose between a mount with or without tiltswivel. Horizontal face plate.Item no. 215198 Mounting adapterItem no. 215199 Mounting adapter,

with tilt swivel

Mounting adapter Arkon, horizontalA mounting adapter for use with devices andholders equipped with an Arkon mount andsingel T. Choose between a mount with orwithout tilt swivel. Horizontal face plate.Item no. 215225 Mounting adapterItem no. 215231 Mounting adapter,

with tilt swivel

945008 Cigg-plugFemale cigg-plug with open ends for fixedinstallation.

215228 Mount, angledAngled mount for a higher placement. Withpredrilled holes.

215325 Tilt swivel adapter plateMounting plate with Richter adapter, with bigtilt swivel.

Headset hookA hook for hanging a headset, portablehandsfree, charging cable etc. Is to beinstalled between the device holder and theProClip.

Item no 215285 For mobile phone, smart-phone or PDA holders, 2 pcs.

Item no 215285 For mobile phone and smartphone holders.

Item no 215284 For PDA handheld holders.

215341 ScrewsSelf tapping screws. 50 pcs.

215174 Tap splice with crimp terminalTap Splice with crimp terminal and fuse 2 A,with holder.

942001 In car charger adapter Connects to the vehicle’s cigarette lightersocket and a USB cable for charging.

Motorcycle mountMount for motorcycles, mounting plate with tiltswivel. With predrilled AMPS-holes.Item no. 215083 26,0 mm diameter.Item no. 215342 31,8 mm diameter.

Note-pad holder with tilt swivelItem no 215099 Holder, note-pad and

pen not included. Item no 215100 Holder with note-pad and

pen included.

215396 Table standKeep your mobile phone within easy reach inthe office as well as home! You can attach anyholder to the stand.