motorised ducoclose
DESCRIPTION
FITTING INSTRUCTIONS. Motorised DucoClose. Product. Type I: Single motor operation (left- or right-side fitting). Type II: Dual motor operation (centre). Motorised DucoClose. Exploded View. Motorised DucoClose. Parts breakdown. Motorised DucoClose. Parts breakdown. Motorised DucoClose. - PowerPoint PPT PresentationTRANSCRIPT
2006/09/08 1
Motorised DucoClose
FITTING INSTRUCTIONS
2006/09/08 2
Product
Mot
oris
ed D
ucoC
lose
Type I: Single motor operationType I: Single motor operation (left- or right-side fitting)(left- or right-side fitting)
Type II: Dual motor operationType II: Dual motor operation (centre)(centre)
2006/09/08 3
Exploded View
Mot
oris
ed D
ucoC
lose
2006/09/08 4
Parts breakdown
Linear actuator
Make : LINAK
Stroke length (working stroke) : 30 mm / thrust (feeding force) : 300 N
Code : G0012445
(PT050174)
Stainless steel M6x35 hexagon head bolt
DIN 933
Code : G0000192
(PT040130)
Double yoke bracket
Dual control, top-mounting
Code : G0012443
(KS060069)
Self-locking M6 hexagonal nut
DIN 985 stainless steel
Code : G0000164
(PT030347)
Single yoke bracket
Single control, top-mounting
Code : G0012441
(KS060068)
Collar bushing
MFM-0610-06
Code : G0012012
(PT040132)
Mot
oris
ed D
ucoC
lose
2006/09/08 5
Parts breakdown
Stainless steel M6 washer
DIN 125-A
Code : G0000175
(PT030346)
Self-locking M5 hexagonal nut
DIN 985 stainless steel
Code : G0000165
(PT040072)
Countersunk M5x55 bolt
DIN 7991
Code : G0000216
(PT040071)
Bottom foot mounting for
dual operation control
Code : G0012442
(KS060069)
Stainless steel M5 washer
DIN 125-A
Code : G0000176
(PT050100)
Bottom foot mounting for
single operation control
Code : G0012440
(KS060064A)
Mot
oris
ed D
ucoC
lose
2006/09/08 6
Parts breakdown
S/steel 3.5x13 mm DIN 7504 self-drilling screw
Code : G0000080
(PT050039)
Countersunk M5x35 bolt
DIN 7991
Code : G0000217
(PT060080)
Mot
oris
ed D
ucoC
lose
2006/09/08 7
Assembly
TYPE I : SINGLE MOTOR OPERATION (left- or right-side fittingTYPE I : SINGLE MOTOR OPERATION (left- or right-side fitting)M
otor
ised
Duc
oClo
se
a. Fix the single yoke bracket (G0012441) to the top of the actuator (G0012445) using the 2 collar bushings (G0012012), and secure with a M6x35 hexagon bolt (G0000192) and an M6 check nut (G0000164).
2006/09/08 8
Assembly
TYPE I : SINGLE MOTOR OPERATION (left- or right-side operation)TYPE I : SINGLE MOTOR OPERATION (left- or right-side operation)M
otor
ised
Duc
oClo
se
b. Secure the bottom foot mounting (G0012440) for single motor operation into position with two 3,5x13 mm self-drilling screws (G0000080) at 216 mm measured from the underside of the
handle support bracket (G0012415, see MTI DucoClose).Make sure the support bracket fits flush with the outside of the Ducoclose.
216 mm
216 mm
2006/09/08 9
Assembly
TYPE I : SINGLE MOTOR OPERATION (left- or right-side operation)TYPE I : SINGLE MOTOR OPERATION (left- or right-side operation)M
otor
ised
Duc
oClo
se
c. First, fit the actuator (G0012445) to the bottom foot mounting with 2 collar bushings (G0012012) and fix in position using two M6x35 hexagon bolts (G0000192) and two M6 check nuts (G0000164).
d. Next, secure the actuator on its top with a countersunk M5x35 bolt (G0000217), an M5 washer (G0000176) and an M5 (G0000165) check nut.
2006/09/08 10
Assembly
TYPE II : DUAL MOTOR OPERATION (centre)TYPE II : DUAL MOTOR OPERATION (centre)M
otor
ised
Duc
oClo
se
a. Fix the double yoke bracket (G0012443) to the top of the actuator (G0012445) using the 2 collar bushings (G0012012), and secure with a M6x35 hexagon bolt (G0000192) and an M6 check nut (G0000164).
2006/09/08 11
Assembly
TYPE II : DUAL MOTOR OPERATION (centreTYPE II : DUAL MOTOR OPERATION (centre)M
otor
ised
Duc
oClo
se
b. Secure the bottom foot mounting (G0012442) for dual motor operation into position with two 3,5x13 mm self-drilling screws (G0000080) at 216 mm measured from the underside of the
handle support bracket (G0012415, see MTI DucoClose).Make sure the support bracket is fitted right in the middle of the DucoClose.
216 mm
==
2006/09/08 12
Assembly
TYPE II : DUAL MOTOR OPERATION (centre)TYPE II : DUAL MOTOR OPERATION (centre)M
otor
ised
Duc
oClo
se
c. First, fit the actuator (G0012445) to the bottom foot mounting with 2 collar bushings (G0012012) and fix in position using two M6x35 hexagon bolts (G0000192) and two M6 check nuts (G0000164).
d. Next, secure the actuator on its top with a countersunk M5x55 bolt (G0000216), an M5 washer (G0000176) and an M5 (G0000165) check nut.