more convenience for your home

M O R E C O N V E N I E N C E F O R Y O U R H O M E

High-Quality Operators for Garage Doors and Entrance GatesGarage door operator LIFTRONICfor Hörmann / EcoStar up-and-over and sectional doors

Certified safetyaccording to the strict requirements of European standard 13241-1

Entrance gate operator PORTRONICfor hinged and sliding gates

3-part boom for the LIFTRONIC 500

Max. pull force 500 N

Door size up to 7 m²(Not for timber doors)

Boom to clip together

Incl. 2 hand transmitters

* Guarantee conditions at www.ecostar.de

L I F T R O N I C 5 0 0

Easy fittingYou can easily fit LIFTRONIC operators to all Hörmann / EcoStar up-and-over and sectional doors in just a few steps.

Super-quiet toothed belt technologyEcoStar LIFTRONIC operators open and close your Hörmann / EcoStar garage door with a minimum of noise. In contrast to chain-guided operators, greasing and oiling are not required.

Reliable automatic safety cut-outThe door stops automatically if it encounters an obstacle. As a result, this function provides the highest level of safety against trapping.

Guaranteed safetyEcoStar LIFTRONIC operators have been tested and certified individually and in combination with all EcoStar and Hörmann garage doors in accordance with European standard 13241-1.

Made in GermanyAll EcoStar LIFTRONIC operators are fully manufactured in Germany. This is quality you can rely on.

Two elegant 2-channel hand transmitters with chrome key ring holder as standard with each operator (illustration in actual size).

Garage Door Operators EcoStar: Pow erful, Reliable, Quiet

Years

W

ARRANTY *

2

Incl. radio code switch

Incl. internal push button


Pre-assembled boom

Door size up to 12.5 m²(For timber doors up to 9.5 m²)


Incl. internal push button


Pre-assembled boom

Door size up to 9.5 m²(For timber doors up to 7 m²)


3-part, pre-assembled boom for the LIFTRONIC 700 and LIFTRONIC 800, ready-to-fit in 90 s.

L I F T R O N I C 8 0 0L I F T R O N I C 7 0 0

Garage Door Operators EcoStar: Pow erful, Reliable, Quiet

Years

W

ARRANTY *

Years

W

ARRANTY *

3

2 x 2,5 m

Synchronous opening if door leaves have the same width


For double-leaf gates

Gate size up to max. 5 m(2 × 2.50 m)


Hinged door operatorP O R T R O N I C - D 5 0 0 0

Opening of just one door leaf for pedestrians

Also available as a PORTRONIC-D 2500 version for single-leaf doors

Reassuring safetyEcoStar entrance gate operators offer increased safety, as they work safely during all opening and closing phases. The door stops in case of sudden obstacles. Optional photocells, which identify persons and objects contact-free, offer additional security.

Pleasantly quietEcoStar entrance gate operators open quietly and reliably. The gate opens without a jolt and gently brakes before fully closing.

Guaranteed safetyThe EcoStar entrance gate operator PORTRONIC provides your home with safety certified by TÜV in accordance with DIN EN 13241-1.

In case of emergencyYour EcoStar entrance gate operator is also well-equipped to deal with a power failure: An easy-to-use emergency release opens the gate without a problem.

Made in GermanyEcoStar entrance gate operators are robust and low maintenance thanks to the weatherproof, durable material, ensuring lasting operation.

Well preparedThe operator control is already prepared for the connection of useful accessories such as photocells, warning lights or outdoor lighting.

A Clear Path Onto Your Property: EcoStar Entrance Gate Operators

* Guarantee conditions at www.ecostar.de

W

ARRANTY *

Years

4


Door size up to max. 4 m


Incl. toothed track parts

Partial opening of the door to allow pedestrians to pass

Sliding door operatorP O R T R O N I C - S 4 0 0 0

We recommend using a sound-absorbing seal.

Special accessories for entrance gate operators

A Clear Path Onto Your Property: EcoStar Entrance Gate Operators

Electric lock / stop plateAn additional, optional electric lock secures a hinged door from being blown open. Single-leaf doors are locked at the post or ground. A stop plate is required for ground locking; in conjunction with the electric lock, it reliably locks the door.

Warning lightA warning light to accompany gate movement, a visual signal that provides extra safety.

Sound-absorbing sealA rubber seal on the edge of the gate reduces the likelihood of vehicle dents or scratches.

PhotocellPhotocell EL 301 detects persons and objects immediately and stops the door without any contact. The result: additional safety for you and your family.

W

ARRANTY *

Years

5

Mini hand transmitterEasy to stow away, practical when you are out and about. The additional 2-button hand transmitter RSC 2 in the advantageous mini-format is particularly suitable for key rings (2 hand transmitters as standard for all operators)

Car transmitterHand transmitter RSZ 1 is plugged into the cigarette lighter and is always on hand in the vehicle.

Internal push buttonInternal push button PB 3 is especially practical and convenient. You can open and close the door at the press of a button on an interior wall in your garage (as standard with LIFTRONIC 700 and LIFTRONIC 800).

Radio code switchUp to 3 operators can be wirelessly operated via impulse using the illuminated radio code switch RCT 3b. This does away with the time-consuming need to lay cables (standard with the LIFTRONIC 800).

Emergency release lockFor up-and-over or sectional doors. Required for garages without a second entrance to manually open the door from the outside in case of a power failure.

Key switchYou can use this to open and close the door from the outside with a key. Two versions in one device – surface-mounted or recessed.

Photocell for garage door operatorsPhotocell EL 101 detects persons and objects immediately and stops the door without any contact. The result: additional safety for you and your family.

ReceiverThe 1-channel receiver RERI 1 / RERE 1 allows the operation of a garage or entrance gate operator with more than 6 hand transmitters (max. 100).

Practical Accessories

6

Fitting Data

Sliding gate operator PORTRONIC-S 4000

0 – 40 mm

Hinged gate operator PORTRONIC-D 5000

* Clearance for fittingUp-and-over doorNo clearance is required for an EcoStar/Hörmann up-and-over door. For other makes, 30 mm is required between the highest point of the door and the ceiling. Note the travel distance.

Sectional doorsA clearance of 15 mm is required for EcoStar sectional doors and Hörmann sectional doors with low lintel track application (Z or L), no clearance is required for Hörmann sectional doors with normal track application (N). For other makes, 30 mm is required between the highest point of the door and the ceiling. Note the travel distance.

40

140

943

100 50

70 Min. 50

Electric connecting lead230 V, NYY 3 × 1.5 mm² (on-site)

Motor cableConnecting lead up to 10 mNYY 5 × 1.5 mm² (on-site)

Foundation dimensionsMin. 440 × 300 × 800 mm (frost resistant)

Connecting leadSee the figure for position of tube

Electric lock connecting leadNYY 3 × 1.5 mm² (on-site) undergroundH07RN-F 2 × 1 mm² on the door leaf

Additional connection cableAll leads underground NYY, e.g. 5 × 1.5 mm²

Electric connecting lead230 V, NYY 3 × 1.5 mm² (on-site)

Additional connection cableAll leads underground NYY, e.g. 5 × 1.5 mm²

Lay all cables separately!

Lay all cables separately!

min. 122 mm

± 0

440800

300

Operator lengthLIFTRONIC 500 700 800

Travel distance 2650 mm 2725 mm 2725 mm

Total operator length 3220 mm 3350 mm 3350 mmTravel distance

Total operator length

*

Garage door operator LIFTRONIC

You will find further information, fitting videos and fitting instructions at www.ecostar.de/service

7

Technical DataLIFTRONIC 500 LIFTRONIC 700 LIFTRONIC 800 PORTRONIC-D 5000 PORTRONIC-S 4000

Application Garage door Garage door Garage door Hinged door Sliding door

Warranty period 3 years 4 years 5 years 2 years 2 years

Max. pull/push force 500 N 700 N 800 N 800 N 600 N

Door travel speed Approx. 10.5 cm/s Approx. 13.5 cm/s Approx. 13.5 cm/s Dependent on door size

Approx. 10 cm/s (15 cm/s)

Operator light 2-minute light - -

Automatic safety cut-out Is automatically taught in for both directions separately - -

Travel limit cut-out / power limit

Self-learning, wear-free, as it is designed without mechanical switches, additionally integrated travel time limit. Automatic safety cut-out,

readjusting at every door run.

End stop door closed required / as standard As standard

Motor Self-locking DC gear drive with Hall sensor

Operating voltage 230 / 240 V AC 230 / 240 V AC 230 / 240 V AC 230 / 240 V AC 230 / 240 V AC

Protection category Only suitable for dry rooms IP 54 IP 44

Guide rail

Extremely flat at 30 mm, 3-part

with maintenance-free, patented toothed belt

Extremely flat at 30 mm, 3-part, pre-assembled, with maintenance-free, patented toothed belt - -

Toothed track elements - - - - As standard

Quick release Operated with a pull cord from the inside in case of power failure As standard As standard

Fitting material Universal installation bracket for up-and-over and sectional doors with fixing material

Fitting set and fixing material

Toothed track segments and fixing

material

Remote control With 2-button mini hand transmitter RSC (433 MHz) and integrated receiver on the circuit board, with 6 memory spaces for 6 hand transmitters. Dependable system with rolling code

Door dimensions*

Max. width 3000 mm 4000 mm 5000 mm 2 × 2500 mm 4000 mm

Max. height 2250 mm (sectional door)

2375 mm (sectional door)

2375 mm (sectional door) 2000 mm 2000 mm

2750 mm (up-and-over door)



Max. area7 m²

Not suitable for timber doors

9.5 m²Suitable for timber doors up to 7 m²

12.5 m²Suitable for timber doors up to 9.5 m²

Max. weight 200 kg/door leaf 300 kg bottom-guided, 250 kg self-supporting

Connecting options / functions Button / impulse, 2-wire photocell

Button / impulse, 2-wire photocell, auto.

timer (60 s), option relay, adjustable power

limit, adjustable operator speed,

adjustable leaf offset

Button / impulse, 2-wire photocell, auto.

timer (60 s), option relay, adjustable power

limit, adjustable operator speed

Packagingdimensions / weight

Box: 191 × 1175 × 153 mm (W × H × D), shipping weight: approx. 10 kg




* Garage doors must be counterbalanced / spring compensated.

Issu

e 06

.17

/ Prin

t 06.

17 /

HF 8

6042

EN

/ PDF

All r

ight

s re

serv

ed. N

o pa

rt m

ay b

e re

prod

uced

with

out o

ur p

rior p

erm

issi

on. S

ubje

ct to

cha

nges

.w

ww

.eco

star

.de

8

more convenience for your home

Documents