mooring buoy - sealite
TRANSCRIPT
Sealite Pty LtdAustralia
+61 (0)3 5977 6128
Sealite Asia Pte LtdSingapore
+65 6829 2243
Sealite United Kingdom LtdUK
+44 (0) 1502 588026
Sealite USA LLCUSA
+1 (603) 737 1311
Mooring BuoySL-MB2600-CR & SL-MB2600-CH
The Sealite AdvantageHigh visibility colours
Strong, polyethylene construction
Replaceable mooring tube
Clear identification with optional graphics
The Sealite range of SL-MB2600 Mooring Buoys are designed to offer customers long life and are suitable for most locations.
The SL-MB2600 range is available in 2600mm diameter. The mooring buoys are rotationally-moulded from UV-stabilised virgin polyethylene to a 18mm wall thickness, and are foam filled with closed-cell polyurethane to prevent water ingress in the unlikely event of damage to the outer layer.
The mooring tube is not moulded into the buoy but slides into a tubular section that runs down the centre of the buoy enabling the tube to be replaced at any stage during the product’s service life.
Sealite’s Mooring Buoys are capable of supporting substantial loads, and are available in a range of colours for clear visibility.
The large galvanised mooring tube will accept large links mooring chain.
Sealite have a range of mooring chains & accessories
- ask your representativetoday on how we can supply
your complete mooring solution Sealite buoy products are made from recyclable materials. As a service to customers, individual components and products at the end of their service life may be returned to Sealite for recycling.
Environmentally Friendly & Recyclable
The SL-MB2600 range has a 2600mm diameter offering increased visibility & buoyancy in deeper waters.
Made from strong, durable, UV-stabilised, virgin polyethelene
Large galvanised mooring tube (optional-painted)
Chain not included - range of mooring equipment available
SL-MB2600_CH
High tensile strength boltsOptional mooring shackle
configuration
SL-MB2600_CR
Closed-cell polyurethanefoam filled
Rotationally-molded to a 18mm wall thickness
Keeper plate for chain retention
Sacrificial anodes for galvanic protection
We believe technology improves navigationTM
Sealite Pty LtdAustralia
+61 (0)3 5977 6128
Sealite Asia Pte LtdSingapore
+65 6829 2243
Sealite United Kingdom LtdUK
+44 (0) 1502 588026
Sealite USA LLCUSA
+1 (603) 737 1311
•S
peci
ficat
ions
sub
ject
to c
hang
e or
var
iatio
n w
ithou
t not
ice
*
Sub
ject
to s
tand
ard
term
s an
d co
nditi
ons
†
Int
ensi
ty s
ettin
g su
bjec
t to
sola
r av
aila
bilit
y^
Ref
er to
the
Seal
ite w
ebsi
te u
nder
the
war
rant
y se
ctio
n
Technical Specifications•*
Technical Illustrations
Not supplied by Sealite.
SL-MB2600-CR SL-MB2600-CH
General CharacteristicsAvailable Colours Red, Green, White, Yellow as per IALA
RecommendationsRed, Green, White, Yellow as per IALA Recommendations
Total Float Volume (ltrs/US gallon) 6710 / 1772 6710 / 1772Reserve Buoyancy (kgs/lbs) 5489 / 12101 5489 / 12101Draft, Maximum (mm/inches) 2600 / 1021/3 2000 / 783/4Freeboard, Minimum (mm/inches) 630 / 244/5 51/ 2Submergence (kg/cm, lb/inches) 53 / 296 53 / 296Maximum Mooring Load (kgs/lbs) 60000 / 132277 60000 / 132277Physical CharacteristicsMaterial Rotationally-moulded
UV-stabilised virgin polyethyleneHigh tensile strength steel mooring post
Rotationally-moulded UV-stabilised virgin polyethyleneHigh tensile strength steel mooring post
Wall Thickness (mm/inches) 18 / 3/4 18 / 3/4Filling Closed-cell polyurethane foam Closed-cell polyurethane foamHeight (mm/inches) 3420 / 13416/25 2498/ 981/3Width (mm/inches) 2600 / 1023/8 2600 / 1023/8Mass (kg/lbs) 1470 / 3241 1470 / 3241CertificationsIALA Surface colours compliant to IALA E-108 Surface colours compliant to IALA E-108Quality Assurance ISO9001:2015 ISO9001:2015Intellectual PropertyTrademarks SEALITE® is a registered
trademark of Sealite Pty LtdSEALITE® is a registered trademark of Sealite Pty Ltd
Warranty * 1 year 1 year