Candidate: Date:

ID#:

Evaluator Comments: Candidate Comments:

Evaluator Date Candidate Date

Retest Evaluator Date Retest Candidate Date

Monthly SCBA InspectionEvaluator Instructions: The candidate shall be provided with SCBA. (The candidate may need forms from the AHJ to completedocumentation.)

Task: Monthly inspection of SCBA.

Performance Outcome: The candidate shall be able to properly complete a monthly inspection of SCBA.

Candidate Directive: “Properly inspect SCBA using monthly inspection criteria.”

No. Task Steps First Test Retest

P F P F

1. Removes SCBA from apparatus and places on floor or bench.

2. Inspects mounting bracket for damage or wear.

3. Examines overall condition of SCBA and notes any damage.

4. Removes cylinder from the harness and checks hydrostatic test date.

5. Checks cylinder for damage and wear.

6. Inspects shoulder straps and waist belt.

7. Checks all buckles and fasteners.

8. Examines the back plate for damage, cracks, or rust.

9. Makes sure all connection points between the cylinder and the SCBA harness operate

properly and are free of damage or corrosion.

10. Reattaches the cylinder to the harness.

11. Checks all hoses and connection points for wear, cuts, or damage.

12. Activates cylinder valve and compares pressure gauge readings.

13. Attaches face piece and checks regulator for proper operation.

14. Allows SCBA to sit idle until PASS activates.

15. Closes cylinder valve and opens by-pass valve to bleed pressure while checking low-

pressure alarm.

16. Returns unit to mounting bracket in ready condition.

17. Completes all necessary paperwork.

Retest Approved By: Retest Evaluator:

Note: This is a Fire Fighter I skill.

© 2007 Jones and Bartlett Publishers and National Fire Protection Association.

11

42597_FF1a_001_153.qxd 7/14/06 8:56 AM Page 11

© Jones and Bartlett Publishers. NOT FOR SALE OR DISTRIBUTION