MONOLITHIC MEMBRANE 6125PREMIUM

ROOFING

AND

WATERPROOFING

TECHNOLOGY

®®

Long recognized as a leaderin the waterproofing industry,Hydrotech enters the 21stCentury with new productsand services that will allow usto serve you better than everbefore. Our thermal andmoisture protection products,drainage systems, paver andprecast materials and ourGarden Roof™ componentswill continue to expand ourinvolvement in plazas, roofs,parking decks and criticalwaterproofing projects.

Hydrotech manufactures itsMonolithic Membrane 6125®

and has sales offices,warehousing facilities, repre-sentatives and approvedcontractors throughout NorthAmerica. We also haverepresentation on a world-widebasis. More than 1/2 billionsquare feet of MM6125 hasbeen successfully installedworldwide for over 35 years .

Monolithic Membrane 6125is a thick, tough, flexible, self-healing membrane for use inwaterproofing and roofingapplications for both newand retrofit construction. Itcan be used both horizontallyand vertically. MM6125 is aspecial formulation of refinedasphalt, synthetic rubbers andextenders.

J. Paul Getty MuseumLos Angeles

University of WashingtonSeattle

Cover Photo: Cordoniu WineryNapa, Ca

Canary Wharf, London

M O N O L I T H I C M E M B R A N E 6 1 2 5 :U N I Q U E C H A R A C T E R I S T I C S

High PerformanceMembrane—ratedby BBA as “an effec-tive barrier to thetransmission of water. . . for the designlife of the roof struc-ture”. Agrément No.90/2431 & 90/2432.

Thermoplastic Material—onecomponent, 100% solids, nosolvents means no on-site curefailures, no two-part mixingand no VOC restrictions.

Dead Level Applications—canwithstand and perform in sub-mersed water conditions and isfully warrantable.

Cold Weather Applications—can be applied to 0˚F (-18˚C).Unaffected by adverse weatherconditions immediately afterinstallation.

High ViscosityMaterial—appliedat 215 mils (5.5mm) or 180 mils(4.5 mm). 2-3 timesthicker than mostother membranesfor better crack

bridging, ease of flashing andsubstrate acceptability.

Monolithic Membrane—seam-less, conforms to deck irregulari-ties, andself-healing ofminor construc-tion damage.

Superiortoughness-tenacity ratiomeans excellentADHESION tosubstrate andCOHESIVE

strength for superb elongationand low temperature flexibility.Does not become brittle.

Acid Resistance—highly resis-tant to fertilizers, buildingwashes, acid rain, methane,and numerous wastes—unlikeother rubberized asphalt prod-ucts that use inexpensive cal-cium carbonate fillers.

Angle Changes—are rein-forced for “triple protection”.

R I G O R O U S Q U A L I T Y C O N T R O L

As a result of rigid quality con-trol of manufacturing and oper-ations, MM6125 has beenawarded an ISO9002 certifi-cate on a worldwide basis,and the BBA AgrémentApproval from the UnitedKingdom. In addition, carriesapprovals from North Americasuch as CGSB-37.50-M89,CCMC, National Defense,and UL & ULC Class A Ratings,

along with local approvalsfrom Dade County, Florida,City of Los Angeles and NewYork City’s MEA.

MM6125 is installed only bya network of accredited con-tractors, a key reason for theenormous success of theHydrotech program. We havestayed with the best approvedapplicators for three decades.

Le Casino de MontrealMontreal

The Toronto City HallToronto

H.U.D. BuildingWashington, D.C.

DECK TYPE STANDARD FABRIC REINFORCED

Cast in-place concrete (wood troweled finish preferred) (minimum density of 115 pcf) YES YES

Composite deck (concrete over metal) YES YES

Precast concrete: “T,” Double “T,” Panel YES YES

Lightweight insulating or cellular concrete NOT RECOMMENDED NOT RECOMMENDED

Wood Plank NO YES

Plywood NO YES

Metal deck with gypsum board NO YES

Rehab (complete tear-off) CONTACT HYDROTECH YES

E S S E N T I A L C O M P O N E N T S

Monolithic Membrane 6125®

Fully-adhered, monolithic rub-berized asphalt waterproofingmembrane for new and retrofitconstruction. Environmentalgrade available.

MM6125 is known for itslong-term performance, flexibilityand self-sealing properties.

Two assemblies available:• Standard @ 180 mils (4.6mm)• FR @ 215 mils (5.5mm).Horizontal and verticalinstallations

Flashing/ReinforcementFlex-Flash UN: An uncured neo-prene flashing at exposed walls,curbs, penetrations, expansionjoints and angle changes.

Flex-Flash F: A spun-bondedpolyester fabric designed asstandard reinforcement forMM6125 for use at changes inplane, construction joints andcracks. Also used in MM6125FR assembly.

Flex-Flash MB: ModifiedBitumen also available forflashing.

Separation and ProtectionCoursesHydroflex® Protection Sheet: Afiberglass reinforced, rubberizedasphalt protection course.Hydroflex will not shrink or curl,eliminating the possibility ofdamage and stress on the mem-brane.

Available in 90 mil thicknessfor waterproofing and 40 milthickness for roofing. 60 mil(1.5 mm) available in Canada.

DECK SELECTOR GUIDE Match deck type with MM6125 membrane assembly

A D D I T I O N A L P R O D U C T S

Hydrodrain®

Durable high performance pre-fabricated drainage mediumscomposed of a high-densitypolyethylene core and non-woven or woven geotextiles.Available in geonet core ordimple core. ConsultHydrodrain brochure.

STYROFOAM®

Insulation board by DowChemical Company for roofs,walls, and plazas. Availablethrough Hydrotech offering asingle-source warranty. Productis CFC free and re-usable.Consult STYROFOAM®

brochure.

Cold Applied WaterproofingMembranesMM7800® a single-compo-nent, cold applied rubberizedasphalt membrane for founda-tion walls. LM6090® a coldtwo-part elastomeric asphaltmembrane for pre-installationflashing or small areas. Consultindividual product data sheets.

VM 75™ Vertical MembraneA 75-mil (2 mm) thick self-adhering waterproofing mem-brane for vertical below-gradesubstrates. Cold weather gradeavailable. Consult productdata sheet.

Garden Roof® ComponentsGarden Roof Assembly compo-nents have been designed tofunction naturally in an elevatedroof or plaza. Assembly compo-nents include high performancedrainage/water retention ele-ments and moisture retentionmats made with 100% recycled-content as well as root barrierprotection for the membrane.Consult Garden Roof Brochureand Planning Guide for details.

Ultimate Assembly®

ComponentsDurable architectural pavers ofhigh compressive strength andlow moisture absorption, pro-duced in a wide variety of fin-ishes, sizes, colors. Siteamenities such as stairs, wallpanels and copings are avail-able to custom-match pavers.Paver supports available toassure precise alignment andproper drainage.

Please consult Hydrotech’sarchitectural paver brochuresfor photos and additional product information.

6125 Brochure-mi 3/28/2005 8:00 AM Page 5

T Y P I C A L A P P L I C A T I O N S

STONE BALLAST

FILTER FABRIC

STYROFOAM®

HYDROFLEX

MM6125

SURFACE CONDITIONER

CONCRETE

CONCRETE

HYDRODRAIN

HYDROFLEX

MM6125

SURFACE CONDITIONER

CONCRETE

ARCHITECTURAL PAVER

SPACER TAB

STYROFOAM®

HYDROFLEX

MM6125

SURFACE CONDITIONER

CONCRETE

PROTECTED MEMBRANE ROOF

ULTIMATE ASSEMBLY

SPLIT-SLAB CONSTRUCTION

6125 Brochure-mi 3/28/2005 8:00 AM Page 6

GRASS

SOIL

HYDRODRAIN

HYDROFLEX

MM6125

SURFACE CONDITIONER

CONCRETE

“EXTENSIVE” VEGETATION

LITETOP GROWING MEDIA

SYSTEMFILTER

FLORADRAIN 40

MOISTURE MAT

HYDRODRAIN

STYROFOAM®

ROOT STOP

HYDROFLEX 30

MM6125-EV

SURFACE CONDITIONER

STANDARD ASSEMBLY(180 Mils thick — 4.6 mm)

HYDROFLEX PROTECTION SHEET

MM6125

SURFACE CONDITIONER

CONCRETE SUBSTRATE

FABRIC REINFORCED (FR) ASSEMBLY(215 Mils thick — 5.5 mm)

HYDROFLEX PROTECTION SHEET

MM6125 (125 MILS)

FLEX-FLASH F REINFORCEMENT

MM6125 (90 MILS)

SURFACE CONDITIONER

CONCRETE SUBSTRATE

LANDSCAPED PLAZA/PLANTER

GARDEN ROOF®

6125 Brochure-mi 3/28/2005 8:00 AM Page 7

“In times of rapid change, with numerous products entering and leaving themarketplace each year—we are very proud of the 40-year track record estab-lished by our Monolithic Membrane 6125 Waterproof Membrane.

“Hydrotech’s foundation has been built on an integrated company effort toincrease customer satisfaction by providing top quality products at a fairprice. We draw from a world of experience when offering technical support tothe design professional, and our philosophy is to form a working partnershipwith every member of the building team when needed, to ensure a total solu-tions approach on each project.

“Our past success drives us to achieve continued excellence. Our programsare based on performance and value. Our reputation is our most importantasset. We look forward to working with you on your next project. Please giveus a call.”

David F. SpaldingPresident

CANADAHydrotech Membrane Corporation 10,951 Parkway, Ville D’Anjou, Quebec H1J 1S1Montreal 800.361.8924 514.353.6000 FAX 514.354.6649Toronto 800.668.8963 905.471.6677 FAX 905.471.6699

UNITED STATESAmerican Hydrotech Inc. 303 East Ohio Street, Chicago, Illinois 60611-3387Chicago 800.877.6125 312.337.4998 FAX 312.661.0731Seattle 206.441.6125 FAX 206.441.0914Washington, D.C. 804.378.6125 FAX 804.379.9367

WORLDWIDEWorld Wide Web: www.hydrotechusa.com

We hope the information given here will be helpful. It is based on data and knowledge considered to be true and correct and is offered for the user’s consideration,investigation and verification. The information is subject to change without notice. The determination of suitability and fitness of the products and the application describedherein for a particular purpose is the sole responsibility of the user. Please read all statements, recommendations and suggestions in conjunction with the conditions of salewhich applly to all goods sold by American Hydrotech, Inc. for the United States and abroad, or Hydrotech Membrane Corporation for Canada, including the expressdisclaimers by each company of the implied warranties of merchantability or fitness for a particular purpose. This brochure supersedes all previous Monolithic Membrane 6125brochures. Nothing stated herein is intended to infringe on any patent or copyright.

© 2005 AMERICAN HYDROTECH INC.

100 N. RiversideChicago, Illinois

Rock ’N’ Roll Hall of FameCleveland, Ohio

TM

6125 Brochure-mi 3/28/2005 8:00 AM Page 8